diff --git a/MAINTAINERS b/MAINTAINERS index da5352dbd4f3f..2e68a68ae810d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -12752,7 +12752,6 @@ F: arch/powerpc/platforms/52xx/ LINUX FOR POWERPC EMBEDDED PPC4XX L: linuxppc-dev@lists.ozlabs.org S: Orphan -F: arch/powerpc/platforms/40x/ F: arch/powerpc/platforms/44x/ LINUX FOR POWERPC EMBEDDED PPC85XX diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index c88c6d46a5bc0..f8891fbe7c164 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -149,7 +149,7 @@ config PPC select ARCH_HAS_PTE_SPECIAL select ARCH_HAS_SCALED_CPUTIME if VIRT_CPU_ACCOUNTING_NATIVE && PPC_BOOK3S_64 select ARCH_HAS_SET_MEMORY - select ARCH_HAS_STRICT_KERNEL_RWX if (PPC_BOOK3S || PPC_8xx || 40x) && !HIBERNATION + select ARCH_HAS_STRICT_KERNEL_RWX if (PPC_BOOK3S || PPC_8xx) && !HIBERNATION select ARCH_HAS_STRICT_KERNEL_RWX if PPC_85xx && !HIBERNATION && !RANDOMIZE_BASE select ARCH_HAS_STRICT_MODULE_RWX if ARCH_HAS_STRICT_KERNEL_RWX select ARCH_HAS_SYSCALL_WRAPPER if !SPU_BASE && !COMPAT @@ -167,7 +167,7 @@ config PPC select ARCH_SPLIT_ARG64 if PPC32 select ARCH_STACKWALK select ARCH_SUPPORTS_ATOMIC_RMW - select ARCH_SUPPORTS_DEBUG_PAGEALLOC if PPC_BOOK3S || PPC_8xx || 40x + select ARCH_SUPPORTS_DEBUG_PAGEALLOC if PPC_BOOK3S || PPC_8xx select ARCH_USE_BUILTIN_BSWAP select ARCH_USE_CMPXCHG_LOCKREF if PPC64 select ARCH_USE_MEMTEST @@ -389,7 +389,7 @@ config ARCH_SUSPEND_POSSIBLE def_bool y depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200 || PPC_83xx || \ (PPC_85xx && !PPC_E500MC) || PPC_86xx || PPC_PSERIES \ - || 44x || 40x + || 44x config ARCH_SUSPEND_NONZERO_CPU def_bool y @@ -443,7 +443,7 @@ config ARCH_SUPPORTS_UPROBES config PPC_ADV_DEBUG_REGS bool - depends on 40x || BOOKE + depends on BOOKE default y config PPC_ADV_DEBUG_IACS @@ -490,7 +490,7 @@ source "kernel/Kconfig.hz" config MATH_EMULATION bool "Math emulation" - depends on 4xx || PPC_8xx || PPC_MPC832x || BOOKE || PPC_MICROWATT + depends on 44x || PPC_8xx || PPC_MPC832x || BOOKE || PPC_MICROWATT select PPC_FPU_REGS help Some PowerPC chips designed for embedded applications do not have @@ -1077,7 +1077,7 @@ config GENERIC_ISA_DMA config PPC_INDIRECT_PCI bool depends on PCI - default y if 40x || 44x + default y if 44x config SBUS bool @@ -1102,15 +1102,12 @@ config FSL_PMC config PPC4xx_CPM bool default y - depends on SUSPEND && (44x || 40x) + depends on SUSPEND && 44x help PPC4xx Clock Power Management (CPM) support (suspend/resume). It also enables support for two different idle states (idle-wait and idle-doze). -config 4xx_SOC - bool - config FSL_LBC bool "Freescale Local Bus support" help diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug index 8c80b154e814e..3799ceceb04a3 100644 --- a/arch/powerpc/Kconfig.debug +++ b/arch/powerpc/Kconfig.debug @@ -244,14 +244,6 @@ config PPC_EARLY_DEBUG_44x inbuilt serial port. If you enable this, ensure you set PPC_EARLY_DEBUG_44x_PHYSLOW below to suit your target board. -config PPC_EARLY_DEBUG_40x - bool "Early serial debugging for IBM/AMCC 40x CPUs" - depends on 40x - help - Select this to enable early debugging for IBM 40x chips via the - inbuilt serial port. This works on chips with a 16550 compatible - UART. - config PPC_EARLY_DEBUG_CPM bool "Early serial debugging for Freescale CPM-based serial ports" depends on SERIAL_CPM=y @@ -356,11 +348,6 @@ config PPC_EARLY_DEBUG_44x_PHYSHIGH depends on PPC_EARLY_DEBUG_44x default "0x1" -config PPC_EARLY_DEBUG_40x_PHYSADDR - hex "Early debug UART physical address" - depends on PPC_EARLY_DEBUG_40x - default "0xef600300" - config PPC_EARLY_DEBUG_CPM_ADDR hex "CPM UART early debug transmit descriptor address" depends on PPC_EARLY_DEBUG_CPM diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index a8479c881cac8..bbfe4a1f06ef9 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -301,11 +301,6 @@ ppc32_allmodconfig: $(Q)$(MAKE) KCONFIG_ALLCONFIG=$(srctree)/arch/powerpc/configs/book3s_32.config \ -f $(srctree)/Makefile allmodconfig -generated_configs += ppc40x_allmodconfig -ppc40x_allmodconfig: - $(Q)$(MAKE) KCONFIG_ALLCONFIG=$(srctree)/arch/powerpc/configs/40x.config \ - -f $(srctree)/Makefile allmodconfig - generated_configs += ppc44x_allmodconfig ppc44x_allmodconfig: $(Q)$(MAKE) KCONFIG_ALLCONFIG=$(srctree)/arch/powerpc/configs/44x.config \ diff --git a/arch/powerpc/boot/4xx.c b/arch/powerpc/boot/4xx.c index 00c4d843a023d..682ca3827892c 100644 --- a/arch/powerpc/boot/4xx.c +++ b/arch/powerpc/boot/4xx.c @@ -253,7 +253,6 @@ void ibm4xx_denali_fixup_memsize(void) dt_fixup_memory(0, memsize); } -#define SPRN_DBCR0_40X 0x3F2 #define SPRN_DBCR0_44X 0x134 #define DBCR0_RST_SYSTEM 0x30000000 @@ -270,18 +269,6 @@ void ibm44x_dbcr_reset(void) } -void ibm40x_dbcr_reset(void) -{ - unsigned long tmp; - - asm volatile ( - "mfspr %0,%1\n" - "oris %0,%0,%2@h\n" - "mtspr %1,%0" - : "=&r"(tmp) : "i"(SPRN_DBCR0_40X), "i"(DBCR0_RST_SYSTEM) - ); -} - #define EMAC_RESET 0x20000000 void ibm4xx_quiesce_eth(u32 *emac0, u32 *emac1) { @@ -544,256 +531,3 @@ void ibm440spe_fixup_clocks(unsigned int sys_clk, eplike_fixup_uart_clk(1, "/plb/opb/serial@f0000300", ser_clk, plb_clk); eplike_fixup_uart_clk(2, "/plb/opb/serial@f0000600", ser_clk, plb_clk); } - -void ibm405gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk) -{ - u32 pllmr = mfdcr(DCRN_CPC0_PLLMR); - u32 cpc0_cr0 = mfdcr(DCRN_405_CPC0_CR0); - u32 cpc0_cr1 = mfdcr(DCRN_405_CPC0_CR1); - u32 psr = mfdcr(DCRN_405_CPC0_PSR); - u32 cpu, plb, opb, ebc, tb, uart0, uart1, m; - u32 fwdv, fwdvb, fbdv, cbdv, opdv, epdv, ppdv, udiv; - - fwdv = (8 - ((pllmr & 0xe0000000) >> 29)); - fbdv = (pllmr & 0x1e000000) >> 25; - if (fbdv == 0) - fbdv = 16; - cbdv = ((pllmr & 0x00060000) >> 17) + 1; /* CPU:PLB */ - opdv = ((pllmr & 0x00018000) >> 15) + 1; /* PLB:OPB */ - ppdv = ((pllmr & 0x00006000) >> 13) + 1; /* PLB:PCI */ - epdv = ((pllmr & 0x00001800) >> 11) + 2; /* PLB:EBC */ - udiv = ((cpc0_cr0 & 0x3e) >> 1) + 1; - - /* check for 405GPr */ - if ((mfpvr() & 0xfffffff0) == (0x50910951 & 0xfffffff0)) { - fwdvb = 8 - (pllmr & 0x00000007); - if (!(psr & 0x00001000)) /* PCI async mode enable == 0 */ - if (psr & 0x00000020) /* New mode enable */ - m = fwdvb * 2 * ppdv; - else - m = fwdvb * cbdv * ppdv; - else if (psr & 0x00000020) /* New mode enable */ - if (psr & 0x00000800) /* PerClk synch mode */ - m = fwdvb * 2 * epdv; - else - m = fbdv * fwdv; - else if (epdv == fbdv) - m = fbdv * cbdv * epdv; - else - m = fbdv * fwdvb * cbdv; - - cpu = sys_clk * m / fwdv; - plb = sys_clk * m / (fwdvb * cbdv); - } else { - m = fwdv * fbdv * cbdv; - cpu = sys_clk * m / fwdv; - plb = cpu / cbdv; - } - opb = plb / opdv; - ebc = plb / epdv; - - if (cpc0_cr0 & 0x80) - /* uart0 uses the external clock */ - uart0 = ser_clk; - else - uart0 = cpu / udiv; - - if (cpc0_cr0 & 0x40) - /* uart1 uses the external clock */ - uart1 = ser_clk; - else - uart1 = cpu / udiv; - - /* setup the timebase clock to tick at the cpu frequency */ - cpc0_cr1 = cpc0_cr1 & ~0x00800000; - mtdcr(DCRN_405_CPC0_CR1, cpc0_cr1); - tb = cpu; - - dt_fixup_cpu_clocks(cpu, tb, 0); - dt_fixup_clock("/plb", plb); - dt_fixup_clock("/plb/opb", opb); - dt_fixup_clock("/plb/ebc", ebc); - dt_fixup_clock("/plb/opb/serial@ef600300", uart0); - dt_fixup_clock("/plb/opb/serial@ef600400", uart1); -} - - -void ibm405ep_fixup_clocks(unsigned int sys_clk) -{ - u32 pllmr0 = mfdcr(DCRN_CPC0_PLLMR0); - u32 pllmr1 = mfdcr(DCRN_CPC0_PLLMR1); - u32 cpc0_ucr = mfdcr(DCRN_CPC0_UCR); - u32 cpu, plb, opb, ebc, uart0, uart1; - u32 fwdva, fwdvb, fbdv, cbdv, opdv, epdv; - u32 pllmr0_ccdv, tb, m; - - fwdva = 8 - ((pllmr1 & 0x00070000) >> 16); - fwdvb = 8 - ((pllmr1 & 0x00007000) >> 12); - fbdv = (pllmr1 & 0x00f00000) >> 20; - if (fbdv == 0) - fbdv = 16; - - cbdv = ((pllmr0 & 0x00030000) >> 16) + 1; /* CPU:PLB */ - epdv = ((pllmr0 & 0x00000300) >> 8) + 2; /* PLB:EBC */ - opdv = ((pllmr0 & 0x00003000) >> 12) + 1; /* PLB:OPB */ - - m = fbdv * fwdvb; - - pllmr0_ccdv = ((pllmr0 & 0x00300000) >> 20) + 1; - if (pllmr1 & 0x80000000) - cpu = sys_clk * m / (fwdva * pllmr0_ccdv); - else - cpu = sys_clk / pllmr0_ccdv; - - plb = cpu / cbdv; - opb = plb / opdv; - ebc = plb / epdv; - tb = cpu; - uart0 = cpu / (cpc0_ucr & 0x0000007f); - uart1 = cpu / ((cpc0_ucr & 0x00007f00) >> 8); - - dt_fixup_cpu_clocks(cpu, tb, 0); - dt_fixup_clock("/plb", plb); - dt_fixup_clock("/plb/opb", opb); - dt_fixup_clock("/plb/ebc", ebc); - dt_fixup_clock("/plb/opb/serial@ef600300", uart0); - dt_fixup_clock("/plb/opb/serial@ef600400", uart1); -} - -static u8 ibm405ex_fwdv_multi_bits[] = { - /* values for: 1 - 16 */ - 0x01, 0x02, 0x0e, 0x09, 0x04, 0x0b, 0x10, 0x0d, 0x0c, 0x05, - 0x06, 0x0f, 0x0a, 0x07, 0x08, 0x03 -}; - -u32 ibm405ex_get_fwdva(unsigned long cpr_fwdv) -{ - u32 index; - - for (index = 0; index < ARRAY_SIZE(ibm405ex_fwdv_multi_bits); index++) - if (cpr_fwdv == (u32)ibm405ex_fwdv_multi_bits[index]) - return index + 1; - - return 0; -} - -static u8 ibm405ex_fbdv_multi_bits[] = { - /* values for: 1 - 100 */ - 0x00, 0xff, 0x7e, 0xfd, 0x7a, 0xf5, 0x6a, 0xd5, 0x2a, 0xd4, - 0x29, 0xd3, 0x26, 0xcc, 0x19, 0xb3, 0x67, 0xce, 0x1d, 0xbb, - 0x77, 0xee, 0x5d, 0xba, 0x74, 0xe9, 0x52, 0xa5, 0x4b, 0x96, - 0x2c, 0xd8, 0x31, 0xe3, 0x46, 0x8d, 0x1b, 0xb7, 0x6f, 0xde, - 0x3d, 0xfb, 0x76, 0xed, 0x5a, 0xb5, 0x6b, 0xd6, 0x2d, 0xdb, - 0x36, 0xec, 0x59, 0xb2, 0x64, 0xc9, 0x12, 0xa4, 0x48, 0x91, - 0x23, 0xc7, 0x0e, 0x9c, 0x38, 0xf0, 0x61, 0xc2, 0x05, 0x8b, - 0x17, 0xaf, 0x5f, 0xbe, 0x7c, 0xf9, 0x72, 0xe5, 0x4a, 0x95, - 0x2b, 0xd7, 0x2e, 0xdc, 0x39, 0xf3, 0x66, 0xcd, 0x1a, 0xb4, - 0x68, 0xd1, 0x22, 0xc4, 0x09, 0x93, 0x27, 0xcf, 0x1e, 0xbc, - /* values for: 101 - 200 */ - 0x78, 0xf1, 0x62, 0xc5, 0x0a, 0x94, 0x28, 0xd0, 0x21, 0xc3, - 0x06, 0x8c, 0x18, 0xb0, 0x60, 0xc1, 0x02, 0x84, 0x08, 0x90, - 0x20, 0xc0, 0x01, 0x83, 0x07, 0x8f, 0x1f, 0xbf, 0x7f, 0xfe, - 0x7d, 0xfa, 0x75, 0xea, 0x55, 0xaa, 0x54, 0xa9, 0x53, 0xa6, - 0x4c, 0x99, 0x33, 0xe7, 0x4e, 0x9d, 0x3b, 0xf7, 0x6e, 0xdd, - 0x3a, 0xf4, 0x69, 0xd2, 0x25, 0xcb, 0x16, 0xac, 0x58, 0xb1, - 0x63, 0xc6, 0x0d, 0x9b, 0x37, 0xef, 0x5e, 0xbd, 0x7b, 0xf6, - 0x6d, 0xda, 0x35, 0xeb, 0x56, 0xad, 0x5b, 0xb6, 0x6c, 0xd9, - 0x32, 0xe4, 0x49, 0x92, 0x24, 0xc8, 0x11, 0xa3, 0x47, 0x8e, - 0x1c, 0xb8, 0x70, 0xe1, 0x42, 0x85, 0x0b, 0x97, 0x2f, 0xdf, - /* values for: 201 - 255 */ - 0x3e, 0xfc, 0x79, 0xf2, 0x65, 0xca, 0x15, 0xab, 0x57, 0xae, - 0x5c, 0xb9, 0x73, 0xe6, 0x4d, 0x9a, 0x34, 0xe8, 0x51, 0xa2, - 0x44, 0x89, 0x13, 0xa7, 0x4f, 0x9e, 0x3c, 0xf8, 0x71, 0xe2, - 0x45, 0x8a, 0x14, 0xa8, 0x50, 0xa1, 0x43, 0x86, 0x0c, 0x98, - 0x30, 0xe0, 0x41, 0x82, 0x04, 0x88, 0x10, 0xa0, 0x40, 0x81, - 0x03, 0x87, 0x0f, 0x9f, 0x3f /* END */ -}; - -u32 ibm405ex_get_fbdv(unsigned long cpr_fbdv) -{ - u32 index; - - for (index = 0; index < ARRAY_SIZE(ibm405ex_fbdv_multi_bits); index++) - if (cpr_fbdv == (u32)ibm405ex_fbdv_multi_bits[index]) - return index + 1; - - return 0; -} - -void ibm405ex_fixup_clocks(unsigned int sys_clk, unsigned int uart_clk) -{ - /* PLL config */ - u32 pllc = CPR0_READ(DCRN_CPR0_PLLC); - u32 plld = CPR0_READ(DCRN_CPR0_PLLD); - u32 cpud = CPR0_READ(DCRN_CPR0_PRIMAD); - u32 plbd = CPR0_READ(DCRN_CPR0_PRIMBD); - u32 opbd = CPR0_READ(DCRN_CPR0_OPBD); - u32 perd = CPR0_READ(DCRN_CPR0_PERD); - - /* Dividers */ - u32 fbdv = ibm405ex_get_fbdv(__fix_zero((plld >> 24) & 0xff, 1)); - - u32 fwdva = ibm405ex_get_fwdva(__fix_zero((plld >> 16) & 0x0f, 1)); - - u32 cpudv0 = __fix_zero((cpud >> 24) & 7, 8); - - /* PLBDV0 is hardwared to 010. */ - u32 plbdv0 = 2; - u32 plb2xdv0 = __fix_zero((plbd >> 16) & 7, 8); - - u32 opbdv0 = __fix_zero((opbd >> 24) & 3, 4); - - u32 perdv0 = __fix_zero((perd >> 24) & 3, 4); - - /* Resulting clocks */ - u32 cpu, plb, opb, ebc, vco, tb, uart0, uart1; - - /* PLL's VCO is the source for primary forward ? */ - if (pllc & 0x40000000) { - u32 m; - - /* Feedback path */ - switch ((pllc >> 24) & 7) { - case 0: - /* PLLOUTx */ - m = fbdv; - break; - case 1: - /* CPU */ - m = fbdv * fwdva * cpudv0; - break; - case 5: - /* PERClk */ - m = fbdv * fwdva * plb2xdv0 * plbdv0 * opbdv0 * perdv0; - break; - default: - printf("WARNING ! Invalid PLL feedback source !\n"); - goto bypass; - } - - vco = (unsigned int)(sys_clk * m); - } else { -bypass: - /* Bypass system PLL */ - vco = 0; - } - - /* CPU = VCO / ( FWDVA x CPUDV0) */ - cpu = vco / (fwdva * cpudv0); - /* PLB = VCO / ( FWDVA x PLB2XDV0 x PLBDV0) */ - plb = vco / (fwdva * plb2xdv0 * plbdv0); - /* OPB = PLB / OPBDV0 */ - opb = plb / opbdv0; - /* EBC = OPB / PERDV0 */ - ebc = opb / perdv0; - - tb = cpu; - uart0 = uart1 = uart_clk; - - dt_fixup_cpu_clocks(cpu, tb, 0); - dt_fixup_clock("/plb", plb); - dt_fixup_clock("/plb/opb", opb); - dt_fixup_clock("/plb/opb/ebc", ebc); - dt_fixup_clock("/plb/opb/serial@ef600200", uart0); - dt_fixup_clock("/plb/opb/serial@ef600300", uart1); -} diff --git a/arch/powerpc/boot/4xx.h b/arch/powerpc/boot/4xx.h index 77f15d124c81c..62df496b7ba61 100644 --- a/arch/powerpc/boot/4xx.h +++ b/arch/powerpc/boot/4xx.h @@ -12,13 +12,9 @@ void ibm4xx_sdram_fixup_memsize(void); void ibm440spe_fixup_memsize(void); void ibm4xx_denali_fixup_memsize(void); void ibm44x_dbcr_reset(void); -void ibm40x_dbcr_reset(void); void ibm4xx_quiesce_eth(u32 *emac0, u32 *emac1); void ibm4xx_fixup_ebc_ranges(const char *ebc); -void ibm405gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk); -void ibm405ep_fixup_clocks(unsigned int sys_clk); -void ibm405ex_fixup_clocks(unsigned int sys_clk, unsigned int uart_clk); void ibm440gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk); void ibm440ep_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk, unsigned int tmr_clk); diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index 35f6b15e4c47d..fa8518067d38e 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -54,10 +54,8 @@ endif $(obj)/4xx.o: BOOTTARGETFLAGS += -mcpu=405 $(obj)/ebony.o: BOOTTARGETFLAGS += -mcpu=440 -$(obj)/cuboot-hotfoot.o: BOOTTARGETFLAGS += -mcpu=405 $(obj)/cuboot-taishan.o: BOOTTARGETFLAGS += -mcpu=440 $(obj)/cuboot-katmai.o: BOOTTARGETFLAGS += -mcpu=440 -$(obj)/cuboot-acadia.o: BOOTTARGETFLAGS += -mcpu=405 $(obj)/treeboot-iss4xx.o: BOOTTARGETFLAGS += -mcpu=405 $(obj)/treeboot-currituck.o: BOOTTARGETFLAGS += -mcpu=405 $(obj)/treeboot-akebono.o: BOOTTARGETFLAGS += -mcpu=405 @@ -146,7 +144,6 @@ src-wlib-$(CONFIG_PPC_POWERNV) += opal-calls.S opal.c ifndef CONFIG_PPC64_BOOT_WRAPPER src-wlib-y += crtsavres.S endif -src-wlib-$(CONFIG_40x) += 4xx.c planetcore.c src-wlib-$(CONFIG_44x) += 4xx.c ebony.c bamboo.c src-wlib-$(CONFIG_PPC_8xx) += mpc8xx.c planetcore.c fsl-soc.c src-wlib-$(CONFIG_PPC_82xx) += pq2.c fsl-soc.c planetcore.c @@ -154,9 +151,6 @@ src-wlib-$(CONFIG_EMBEDDED6xx) += ugecon.c fsl-soc.c src-wlib-$(CONFIG_CPM) += cpm-serial.c src-plat-y := of.c epapr.c -src-plat-$(CONFIG_40x) += fixed-head.S cuboot-hotfoot.c \ - cuboot-acadia.c \ - cuboot-kilauea.c simpleboot.c src-plat-$(CONFIG_44x) += treeboot-ebony.c cuboot-ebony.c treeboot-bamboo.c \ cuboot-bamboo.c cuboot-sam440ep.c \ cuboot-sequoia.c cuboot-rainier.c \ @@ -300,11 +294,6 @@ image-$(CONFIG_EPAPR_BOOT) += zImage.epapr # Boards with newish u-boot firmware can use the uImage target above # -# Board ports in arch/powerpc/platform/40x/Kconfig -image-$(CONFIG_HOTFOOT) += cuImage.hotfoot -image-$(CONFIG_ACADIA) += cuImage.acadia -image-$(CONFIG_OBS600) += uImage.obs600 - # Board ports in arch/powerpc/platform/44x/Kconfig image-$(CONFIG_EBONY) += treeImage.ebony cuImage.ebony image-$(CONFIG_BAMBOO) += treeImage.bamboo cuImage.bamboo diff --git a/arch/powerpc/boot/cuboot-acadia.c b/arch/powerpc/boot/cuboot-acadia.c deleted file mode 100644 index 46e96756cfe10..0000000000000 --- a/arch/powerpc/boot/cuboot-acadia.c +++ /dev/null @@ -1,171 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Old U-boot compatibility for Acadia - * - * Author: Josh Boyer - * - * Copyright 2008 IBM Corporation - */ - -#include "ops.h" -#include "io.h" -#include "dcr.h" -#include "stdio.h" -#include "4xx.h" -#include "44x.h" -#include "cuboot.h" - -#define TARGET_4xx -#include "ppcboot.h" - -static bd_t bd; - -#define CPR_PERD0_SPIDV_MASK 0x000F0000 /* SPI Clock Divider */ - -#define PLLC_SRC_MASK 0x20000000 /* PLL feedback source */ - -#define PLLD_FBDV_MASK 0x1F000000 /* PLL feedback divider value */ -#define PLLD_FWDVA_MASK 0x000F0000 /* PLL forward divider A value */ -#define PLLD_FWDVB_MASK 0x00000700 /* PLL forward divider B value */ - -#define PRIMAD_CPUDV_MASK 0x0F000000 /* CPU Clock Divisor Mask */ -#define PRIMAD_PLBDV_MASK 0x000F0000 /* PLB Clock Divisor Mask */ -#define PRIMAD_OPBDV_MASK 0x00000F00 /* OPB Clock Divisor Mask */ -#define PRIMAD_EBCDV_MASK 0x0000000F /* EBC Clock Divisor Mask */ - -#define PERD0_PWMDV_MASK 0xFF000000 /* PWM Divider Mask */ -#define PERD0_SPIDV_MASK 0x000F0000 /* SPI Divider Mask */ -#define PERD0_U0DV_MASK 0x0000FF00 /* UART 0 Divider Mask */ -#define PERD0_U1DV_MASK 0x000000FF /* UART 1 Divider Mask */ - -static void get_clocks(void) -{ - unsigned long sysclk, cpr_plld, cpr_pllc, cpr_primad, plloutb, i; - unsigned long pllFwdDiv, pllFwdDivB, pllFbkDiv, pllPlbDiv, pllExtBusDiv; - unsigned long pllOpbDiv, freqEBC, freqUART, freqOPB; - unsigned long div; /* total divisor udiv * bdiv */ - unsigned long umin; /* minimum udiv */ - unsigned short diff; /* smallest diff */ - unsigned long udiv; /* best udiv */ - unsigned short idiff; /* current diff */ - unsigned short ibdiv; /* current bdiv */ - unsigned long est; /* current estimate */ - unsigned long baud; - void *np; - - /* read the sysclk value from the CPLD */ - sysclk = (in_8((unsigned char *)0x80000000) == 0xc) ? 66666666 : 33333000; - - /* - * Read PLL Mode registers - */ - cpr_plld = CPR0_READ(DCRN_CPR0_PLLD); - cpr_pllc = CPR0_READ(DCRN_CPR0_PLLC); - - /* - * Determine forward divider A - */ - pllFwdDiv = ((cpr_plld & PLLD_FWDVA_MASK) >> 16); - - /* - * Determine forward divider B - */ - pllFwdDivB = ((cpr_plld & PLLD_FWDVB_MASK) >> 8); - if (pllFwdDivB == 0) - pllFwdDivB = 8; - - /* - * Determine FBK_DIV. - */ - pllFbkDiv = ((cpr_plld & PLLD_FBDV_MASK) >> 24); - if (pllFbkDiv == 0) - pllFbkDiv = 256; - - /* - * Read CPR_PRIMAD register - */ - cpr_primad = CPR0_READ(DCRN_CPR0_PRIMAD); - - /* - * Determine PLB_DIV. - */ - pllPlbDiv = ((cpr_primad & PRIMAD_PLBDV_MASK) >> 16); - if (pllPlbDiv == 0) - pllPlbDiv = 16; - - /* - * Determine EXTBUS_DIV. - */ - pllExtBusDiv = (cpr_primad & PRIMAD_EBCDV_MASK); - if (pllExtBusDiv == 0) - pllExtBusDiv = 16; - - /* - * Determine OPB_DIV. - */ - pllOpbDiv = ((cpr_primad & PRIMAD_OPBDV_MASK) >> 8); - if (pllOpbDiv == 0) - pllOpbDiv = 16; - - /* There is a bug in U-Boot that prevents us from using - * bd.bi_opbfreq because U-Boot doesn't populate it for - * 405EZ. We get to calculate it, yay! - */ - freqOPB = (sysclk *pllFbkDiv) /pllOpbDiv; - - freqEBC = (sysclk * pllFbkDiv) / pllExtBusDiv; - - plloutb = ((sysclk * ((cpr_pllc & PLLC_SRC_MASK) ? - pllFwdDivB : pllFwdDiv) * - pllFbkDiv) / pllFwdDivB); - - np = find_node_by_alias("serial0"); - if (getprop(np, "current-speed", &baud, sizeof(baud)) != sizeof(baud)) - fatal("no current-speed property\n\r"); - - udiv = 256; /* Assume lowest possible serial clk */ - div = plloutb / (16 * baud); /* total divisor */ - umin = (plloutb / freqOPB) << 1; /* 2 x OPB divisor */ - diff = 256; /* highest possible */ - - /* i is the test udiv value -- start with the largest - * possible (256) to minimize serial clock and constrain - * search to umin. - */ - for (i = 256; i > umin; i--) { - ibdiv = div / i; - est = i * ibdiv; - idiff = (est > div) ? (est-div) : (div-est); - if (idiff == 0) { - udiv = i; - break; /* can't do better */ - } else if (idiff < diff) { - udiv = i; /* best so far */ - diff = idiff; /* update lowest diff*/ - } - } - freqUART = plloutb / udiv; - - dt_fixup_cpu_clocks(bd.bi_procfreq, bd.bi_intfreq, bd.bi_plb_busfreq); - dt_fixup_clock("/plb/ebc", freqEBC); - dt_fixup_clock("/plb/opb", freqOPB); - dt_fixup_clock("/plb/opb/serial@ef600300", freqUART); - dt_fixup_clock("/plb/opb/serial@ef600400", freqUART); -} - -static void acadia_fixups(void) -{ - dt_fixup_memory(bd.bi_memstart, bd.bi_memsize); - get_clocks(); - dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr); -} - -void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7) -{ - CUBOOT_INIT(); - platform_ops.fixups = acadia_fixups; - platform_ops.exit = ibm40x_dbcr_reset; - fdt_init(_dtb_start); - serial_console_init(); -} diff --git a/arch/powerpc/boot/cuboot-hotfoot.c b/arch/powerpc/boot/cuboot-hotfoot.c deleted file mode 100644 index 0e5532f855d61..0000000000000 --- a/arch/powerpc/boot/cuboot-hotfoot.c +++ /dev/null @@ -1,139 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Old U-boot compatibility for Esteem 195E Hotfoot CPU Board - * - * Author: Solomon Peachy - */ - -#include "ops.h" -#include "stdio.h" -#include "reg.h" -#include "dcr.h" -#include "4xx.h" -#include "cuboot.h" - -#define TARGET_4xx -#define TARGET_HOTFOOT - -#include "ppcboot-hotfoot.h" - -static bd_t bd; - -#define NUM_REGS 3 - -static void hotfoot_fixups(void) -{ - u32 uart = mfdcr(DCRN_CPC0_UCR) & 0x7f; - - dt_fixup_memory(bd.bi_memstart, bd.bi_memsize); - - dt_fixup_cpu_clocks(bd.bi_procfreq, bd.bi_procfreq, 0); - dt_fixup_clock("/plb", bd.bi_plb_busfreq); - dt_fixup_clock("/plb/opb", bd.bi_opbfreq); - dt_fixup_clock("/plb/ebc", bd.bi_pci_busfreq); - dt_fixup_clock("/plb/opb/serial@ef600300", bd.bi_procfreq / uart); - dt_fixup_clock("/plb/opb/serial@ef600400", bd.bi_procfreq / uart); - - dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr); - dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr); - - /* Is this a single eth/serial board? */ - if ((bd.bi_enet1addr[0] == 0) && - (bd.bi_enet1addr[1] == 0) && - (bd.bi_enet1addr[2] == 0) && - (bd.bi_enet1addr[3] == 0) && - (bd.bi_enet1addr[4] == 0) && - (bd.bi_enet1addr[5] == 0)) { - void *devp; - - printf("Trimming devtree for single serial/eth board\n"); - - devp = finddevice("/plb/opb/serial@ef600300"); - if (!devp) - fatal("Can't find node for /plb/opb/serial@ef600300"); - del_node(devp); - - devp = finddevice("/plb/opb/ethernet@ef600900"); - if (!devp) - fatal("Can't find node for /plb/opb/ethernet@ef600900"); - del_node(devp); - } - - ibm4xx_quiesce_eth((u32 *)0xef600800, (u32 *)0xef600900); - - /* Fix up flash size in fdt for 4M boards. */ - if (bd.bi_flashsize < 0x800000) { - u32 regs[NUM_REGS]; - void *devp = finddevice("/plb/ebc/nor_flash@0"); - if (!devp) - fatal("Can't find FDT node for nor_flash!??"); - - printf("Fixing devtree for 4M Flash\n"); - - /* First fix up the base address */ - getprop(devp, "reg", regs, sizeof(regs)); - regs[0] = 0; - regs[1] = 0xffc00000; - regs[2] = 0x00400000; - setprop(devp, "reg", regs, sizeof(regs)); - - /* Then the offsets */ - devp = finddevice("/plb/ebc/nor_flash@0/partition@0"); - if (!devp) - fatal("Can't find FDT node for partition@0"); - getprop(devp, "reg", regs, 2*sizeof(u32)); - regs[0] -= 0x400000; - setprop(devp, "reg", regs, 2*sizeof(u32)); - - devp = finddevice("/plb/ebc/nor_flash@0/partition@1"); - if (!devp) - fatal("Can't find FDT node for partition@1"); - getprop(devp, "reg", regs, 2*sizeof(u32)); - regs[0] -= 0x400000; - setprop(devp, "reg", regs, 2*sizeof(u32)); - - devp = finddevice("/plb/ebc/nor_flash@0/partition@2"); - if (!devp) - fatal("Can't find FDT node for partition@2"); - getprop(devp, "reg", regs, 2*sizeof(u32)); - regs[0] -= 0x400000; - setprop(devp, "reg", regs, 2*sizeof(u32)); - - devp = finddevice("/plb/ebc/nor_flash@0/partition@3"); - if (!devp) - fatal("Can't find FDT node for partition@3"); - getprop(devp, "reg", regs, 2*sizeof(u32)); - regs[0] -= 0x400000; - setprop(devp, "reg", regs, 2*sizeof(u32)); - - devp = finddevice("/plb/ebc/nor_flash@0/partition@4"); - if (!devp) - fatal("Can't find FDT node for partition@4"); - getprop(devp, "reg", regs, 2*sizeof(u32)); - regs[0] -= 0x400000; - setprop(devp, "reg", regs, 2*sizeof(u32)); - - devp = finddevice("/plb/ebc/nor_flash@0/partition@6"); - if (!devp) - fatal("Can't find FDT node for partition@6"); - getprop(devp, "reg", regs, 2*sizeof(u32)); - regs[0] -= 0x400000; - setprop(devp, "reg", regs, 2*sizeof(u32)); - - /* Delete the FeatFS node */ - devp = finddevice("/plb/ebc/nor_flash@0/partition@5"); - if (!devp) - fatal("Can't find FDT node for partition@5"); - del_node(devp); - } -} - -void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7) -{ - CUBOOT_INIT(); - platform_ops.fixups = hotfoot_fixups; - platform_ops.exit = ibm40x_dbcr_reset; - fdt_init(_dtb_start); - serial_console_init(); -} diff --git a/arch/powerpc/boot/cuboot-kilauea.c b/arch/powerpc/boot/cuboot-kilauea.c deleted file mode 100644 index fda182f518a29..0000000000000 --- a/arch/powerpc/boot/cuboot-kilauea.c +++ /dev/null @@ -1,46 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Old U-boot compatibility for PPC405EX. This image is already included - * a dtb. - * - * Author: Tiejun Chen - * - * Copyright (C) 2009 Wind River Systems, Inc. - */ - -#include "ops.h" -#include "io.h" -#include "dcr.h" -#include "stdio.h" -#include "4xx.h" -#include "44x.h" -#include "cuboot.h" - -#define TARGET_4xx -#define TARGET_44x -#include "ppcboot.h" - -#define KILAUEA_SYS_EXT_SERIAL_CLOCK 11059200 /* ext. 11.059MHz clk */ - -static bd_t bd; - -static void kilauea_fixups(void) -{ - unsigned long sysclk = 33333333; - - ibm405ex_fixup_clocks(sysclk, KILAUEA_SYS_EXT_SERIAL_CLOCK); - dt_fixup_memory(bd.bi_memstart, bd.bi_memsize); - ibm4xx_fixup_ebc_ranges("/plb/opb/ebc"); - dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr); - dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr); -} - -void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7) -{ - CUBOOT_INIT(); - platform_ops.fixups = kilauea_fixups; - platform_ops.exit = ibm40x_dbcr_reset; - fdt_init(_dtb_start); - serial_console_init(); -} diff --git a/arch/powerpc/boot/dcr.h b/arch/powerpc/boot/dcr.h index 334ab8b5a6680..91dc3a302cc8c 100644 --- a/arch/powerpc/boot/dcr.h +++ b/arch/powerpc/boot/dcr.h @@ -153,17 +153,6 @@ static const unsigned long sdram_bxcr[] = { SDRAM0_B0CR, SDRAM0_B1CR, #define CPR0_SCPID 0x120 #define CPR0_PLLC0 0x40 -/* 405GP Clocking/Power Management/Chip Control regs */ -#define DCRN_CPC0_PLLMR 0xb0 -#define DCRN_405_CPC0_CR0 0xb1 -#define DCRN_405_CPC0_CR1 0xb2 -#define DCRN_405_CPC0_PSR 0xb4 - -/* 405EP Clocking/Power Management/Chip Control regs */ -#define DCRN_CPC0_PLLMR0 0xf0 -#define DCRN_CPC0_PLLMR1 0xf4 -#define DCRN_CPC0_UCR 0xf5 - /* 440GX/405EX Clock Control reg */ #define DCRN_CPR0_CLKUPD 0x020 #define DCRN_CPR0_PLLC 0x040 diff --git a/arch/powerpc/boot/dts/acadia.dts b/arch/powerpc/boot/dts/acadia.dts deleted file mode 100644 index 5fedda8113783..0000000000000 --- a/arch/powerpc/boot/dts/acadia.dts +++ /dev/null @@ -1,224 +0,0 @@ -/* - * Device Tree Source for AMCC Acadia (405EZ) - * - * Copyright IBM Corp. 2008 - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -/dts-v1/; - -/ { - #address-cells = <1>; - #size-cells = <1>; - model = "amcc,acadia"; - compatible = "amcc,acadia"; - dcr-parent = <&{/cpus/cpu@0}>; - - aliases { - ethernet0 = &EMAC0; - serial0 = &UART0; - serial1 = &UART1; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - model = "PowerPC,405EZ"; - reg = <0x0>; - clock-frequency = <0>; /* Filled in by wrapper */ - timebase-frequency = <0>; /* Filled in by wrapper */ - i-cache-line-size = <32>; - d-cache-line-size = <32>; - i-cache-size = <16384>; - d-cache-size = <16384>; - dcr-controller; - dcr-access-method = "native"; - }; - }; - - memory { - device_type = "memory"; - reg = <0x0 0x0>; /* Filled in by wrapper */ - }; - - UIC0: interrupt-controller { - compatible = "ibm,uic-405ez", "ibm,uic"; - interrupt-controller; - dcr-reg = <0x0c0 0x009>; - cell-index = <0>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - }; - - plb { - compatible = "ibm,plb-405ez", "ibm,plb3"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - clock-frequency = <0>; /* Filled in by wrapper */ - - MAL0: mcmal { - compatible = "ibm,mcmal-405ez", "ibm,mcmal"; - dcr-reg = <0x380 0x62>; - num-tx-chans = <1>; - num-rx-chans = <1>; - interrupt-parent = <&UIC0>; - /* 405EZ has only 3 interrupts to the UIC, as - * SERR, TXDE, and RXDE are or'd together into - * one UIC bit - */ - interrupts = < - 0x13 0x4 /* TXEOB */ - 0x15 0x4 /* RXEOB */ - 0x12 0x4 /* SERR, TXDE, RXDE */>; - }; - - POB0: opb { - compatible = "ibm,opb-405ez", "ibm,opb"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - dcr-reg = <0x0a 0x05>; - clock-frequency = <0>; /* Filled in by wrapper */ - - UART0: serial@ef600300 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0xef600300 0x8>; - virtual-reg = <0xef600300>; - clock-frequency = <0>; /* Filled in by wrapper */ - current-speed = <115200>; - interrupt-parent = <&UIC0>; - interrupts = <0x5 0x4>; - }; - - UART1: serial@ef600400 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0xef600400 0x8>; - clock-frequency = <0>; /* Filled in by wrapper */ - current-speed = <115200>; - interrupt-parent = <&UIC0>; - interrupts = <0x6 0x4>; - }; - - IIC: i2c@ef600500 { - compatible = "ibm,iic-405ez", "ibm,iic"; - reg = <0xef600500 0x11>; - interrupt-parent = <&UIC0>; - interrupts = <0xa 0x4>; - }; - - GPIO0: gpio@ef600700 { - compatible = "ibm,gpio-405ez"; - reg = <0xef600700 0x20>; - }; - - GPIO1: gpio@ef600800 { - compatible = "ibm,gpio-405ez"; - reg = <0xef600800 0x20>; - }; - - EMAC0: ethernet@ef600900 { - device_type = "network"; - compatible = "ibm,emac-405ez", "ibm,emac"; - interrupt-parent = <&UIC0>; - interrupts = < - 0x10 0x4 /* Ethernet */ - 0x11 0x4 /* Ethernet Wake up */>; - local-mac-address = [000000000000]; /* Filled in by wrapper */ - reg = <0xef600900 0x70>; - mal-device = <&MAL0>; - mal-tx-channel = <0>; - mal-rx-channel = <0>; - cell-index = <0>; - max-frame-size = <1500>; - rx-fifo-size = <4096>; - tx-fifo-size = <2048>; - phy-mode = "mii"; - phy-map = <0x0>; - }; - - CAN0: can@ef601000 { - compatible = "amcc,can-405ez"; - reg = <0xef601000 0x620>; - interrupt-parent = <&UIC0>; - interrupts = <0x7 0x4>; - }; - - CAN1: can@ef601800 { - compatible = "amcc,can-405ez"; - reg = <0xef601800 0x620>; - interrupt-parent = <&UIC0>; - interrupts = <0x8 0x4>; - }; - - cameleon@ef602000 { - compatible = "amcc,cameleon-405ez"; - reg = <0xef602000 0x800>; - interrupt-parent = <&UIC0>; - interrupts = <0xb 0x4 0xc 0x4>; - }; - - ieee1588@ef602800 { - compatible = "amcc,ieee1588-405ez"; - reg = <0xef602800 0x60>; - interrupt-parent = <&UIC0>; - interrupts = <0x4 0x4>; - /* This thing is a bit weird. It has its own UIC - * that it uses to generate snapshot triggers. We - * don't really support this device yet, and it needs - * work to figure this out. - */ - dcr-reg = <0xe0 0x9>; - }; - - usb@ef603000 { - compatible = "ohci-be"; - reg = <0xef603000 0x80>; - interrupt-parent = <&UIC0>; - interrupts = <0xd 0x4 0xe 0x4>; - }; - - dac@ef603300 { - compatible = "amcc,dac-405ez"; - reg = <0xef603300 0x40>; - interrupt-parent = <&UIC0>; - interrupts = <0x18 0x4>; - }; - - adc@ef603400 { - compatible = "amcc,adc-405ez"; - reg = <0xef603400 0x40>; - interrupt-parent = <&UIC0>; - interrupts = <0x17 0x4>; - }; - - spi@ef603500 { - compatible = "amcc,spi-405ez"; - reg = <0xef603500 0x100>; - interrupt-parent = <&UIC0>; - interrupts = <0x9 0x4>; - }; - }; - - EBC0: ebc { - compatible = "ibm,ebc-405ez", "ibm,ebc"; - dcr-reg = <0x12 0x2>; - #address-cells = <2>; - #size-cells = <1>; - clock-frequency = <0>; /* Filled in by wrapper */ - }; - }; - - chosen { - stdout-path = "/plb/opb/serial@ef600300"; - }; -}; diff --git a/arch/powerpc/boot/dts/haleakala.dts b/arch/powerpc/boot/dts/haleakala.dts deleted file mode 100644 index f81ce8786d597..0000000000000 --- a/arch/powerpc/boot/dts/haleakala.dts +++ /dev/null @@ -1,281 +0,0 @@ -/* - * Device Tree Source for AMCC Haleakala (405EXr) - * - * Copyright 2008 DENX Software Engineering, Stefan Roese - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - */ - -/dts-v1/; - -/ { - #address-cells = <1>; - #size-cells = <1>; - model = "amcc,haleakala"; - compatible = "amcc,haleakala", "amcc,kilauea"; - dcr-parent = <&{/cpus/cpu@0}>; - - aliases { - ethernet0 = &EMAC0; - serial0 = &UART0; - serial1 = &UART1; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - model = "PowerPC,405EXr"; - reg = <0x00000000>; - clock-frequency = <0>; /* Filled in by U-Boot */ - timebase-frequency = <0>; /* Filled in by U-Boot */ - i-cache-line-size = <32>; - d-cache-line-size = <32>; - i-cache-size = <16384>; /* 16 kB */ - d-cache-size = <16384>; /* 16 kB */ - dcr-controller; - dcr-access-method = "native"; - }; - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */ - }; - - UIC0: interrupt-controller { - compatible = "ibm,uic-405exr", "ibm,uic"; - interrupt-controller; - cell-index = <0>; - dcr-reg = <0x0c0 0x009>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - }; - - UIC1: interrupt-controller1 { - compatible = "ibm,uic-405exr","ibm,uic"; - interrupt-controller; - cell-index = <1>; - dcr-reg = <0x0d0 0x009>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ - interrupt-parent = <&UIC0>; - }; - - UIC2: interrupt-controller2 { - compatible = "ibm,uic-405exr","ibm,uic"; - interrupt-controller; - cell-index = <2>; - dcr-reg = <0x0e0 0x009>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */ - interrupt-parent = <&UIC0>; - }; - - plb { - compatible = "ibm,plb-405exr", "ibm,plb4"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - clock-frequency = <0>; /* Filled in by U-Boot */ - - SDRAM0: memory-controller { - compatible = "ibm,sdram-405exr", "ibm,sdram-4xx-ddr2"; - dcr-reg = <0x010 0x002>; - interrupt-parent = <&UIC2>; - interrupts = <0x5 0x4 /* ECC DED Error */ - 0x6 0x4>; /* ECC SEC Error */ - }; - - MAL0: mcmal { - compatible = "ibm,mcmal-405exr", "ibm,mcmal2"; - dcr-reg = <0x180 0x062>; - num-tx-chans = <2>; - num-rx-chans = <2>; - interrupt-parent = <&MAL0>; - interrupts = <0x0 0x1 0x2 0x3 0x4>; - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = ; - interrupt-map-mask = <0xffffffff>; - }; - - POB0: opb { - compatible = "ibm,opb-405exr", "ibm,opb"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x80000000 0x80000000 0x10000000 - 0xef600000 0xef600000 0x00a00000 - 0xf0000000 0xf0000000 0x10000000>; - dcr-reg = <0x0a0 0x005>; - clock-frequency = <0>; /* Filled in by U-Boot */ - - EBC0: ebc { - compatible = "ibm,ebc-405exr", "ibm,ebc"; - dcr-reg = <0x012 0x002>; - #address-cells = <2>; - #size-cells = <1>; - clock-frequency = <0>; /* Filled in by U-Boot */ - /* ranges property is supplied by U-Boot */ - interrupts = <0x5 0x1>; - interrupt-parent = <&UIC1>; - - nor_flash@0,0 { - compatible = "amd,s29gl512n", "cfi-flash"; - bank-width = <2>; - reg = <0x00000000 0x00000000 0x04000000>; - #address-cells = <1>; - #size-cells = <1>; - partition@0 { - label = "kernel"; - reg = <0x00000000 0x00200000>; - }; - partition@200000 { - label = "root"; - reg = <0x00200000 0x00200000>; - }; - partition@400000 { - label = "user"; - reg = <0x00400000 0x03b60000>; - }; - partition@3f60000 { - label = "env"; - reg = <0x03f60000 0x00040000>; - }; - partition@3fa0000 { - label = "u-boot"; - reg = <0x03fa0000 0x00060000>; - }; - }; - }; - - UART0: serial@ef600200 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0xef600200 0x00000008>; - virtual-reg = <0xef600200>; - clock-frequency = <0>; /* Filled in by U-Boot */ - current-speed = <0>; - interrupt-parent = <&UIC0>; - interrupts = <0x1a 0x4>; - }; - - UART1: serial@ef600300 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0xef600300 0x00000008>; - virtual-reg = <0xef600300>; - clock-frequency = <0>; /* Filled in by U-Boot */ - current-speed = <0>; - interrupt-parent = <&UIC0>; - interrupts = <0x1 0x4>; - }; - - IIC0: i2c@ef600400 { - compatible = "ibm,iic-405exr", "ibm,iic"; - reg = <0xef600400 0x00000014>; - interrupt-parent = <&UIC0>; - interrupts = <0x2 0x4>; - }; - - IIC1: i2c@ef600500 { - compatible = "ibm,iic-405exr", "ibm,iic"; - reg = <0xef600500 0x00000014>; - interrupt-parent = <&UIC0>; - interrupts = <0x7 0x4>; - }; - - - RGMII0: emac-rgmii@ef600b00 { - compatible = "ibm,rgmii-405exr", "ibm,rgmii"; - reg = <0xef600b00 0x00000104>; - has-mdio; - }; - - EMAC0: ethernet@ef600900 { - linux,network-index = <0x0>; - device_type = "network"; - compatible = "ibm,emac-405exr", "ibm,emac4sync"; - interrupt-parent = <&EMAC0>; - interrupts = <0x0 0x1>; - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = ; - reg = <0xef600900 0x000000c4>; - local-mac-address = [000000000000]; /* Filled in by U-Boot */ - mal-device = <&MAL0>; - mal-tx-channel = <0>; - mal-rx-channel = <0>; - cell-index = <0>; - max-frame-size = <9000>; - rx-fifo-size = <4096>; - tx-fifo-size = <2048>; - rx-fifo-size-gige = <16384>; - tx-fifo-size-gige = <16384>; - phy-mode = "rgmii"; - phy-map = <0x00000000>; - rgmii-device = <&RGMII0>; - rgmii-channel = <0>; - has-inverted-stacr-oc; - has-new-stacr-staopc; - }; - }; - - PCIE0: pcie@a0000000 { - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex"; - primary; - port = <0x0>; /* port number */ - reg = <0xa0000000 0x20000000 /* Config space access */ - 0xef000000 0x00001000>; /* Registers */ - dcr-reg = <0x040 0x020>; - sdr-base = <0x400>; - - /* Outbound ranges, one memory and one IO, - * later cannot be changed - */ - ranges = <0x02000000 0x00000000 0x80000000 0x90000000 0x00000000 0x08000000 - 0x01000000 0x00000000 0x00000000 0xe0000000 0x00000000 0x00010000>; - - /* Inbound 2GB range starting at 0 */ - dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>; - - /* This drives busses 0x00 to 0x3f */ - bus-range = <0x0 0x3f>; - - /* Legacy interrupts (note the weird polarity, the bridge seems - * to invert PCIe legacy interrupts). - * We are de-swizzling here because the numbers are actually for - * port of the root complex virtual P2P bridge. But I want - * to avoid putting a node for it in the tree, so the numbers - * below are basically de-swizzled numbers. - * The real slot is on idsel 0, so the swizzling is 1:1 - */ - interrupt-map-mask = <0x0 0x0 0x0 0x7>; - interrupt-map = < - 0x0 0x0 0x0 0x1 &UIC2 0x0 0x4 /* swizzled int A */ - 0x0 0x0 0x0 0x2 &UIC2 0x1 0x4 /* swizzled int B */ - 0x0 0x0 0x0 0x3 &UIC2 0x2 0x4 /* swizzled int C */ - 0x0 0x0 0x0 0x4 &UIC2 0x3 0x4 /* swizzled int D */>; - }; - }; -}; diff --git a/arch/powerpc/boot/dts/hotfoot.dts b/arch/powerpc/boot/dts/hotfoot.dts deleted file mode 100644 index b93bf2d9dd5be..0000000000000 --- a/arch/powerpc/boot/dts/hotfoot.dts +++ /dev/null @@ -1,296 +0,0 @@ -/* - * Device Tree Source for ESTeem 195E Hotfoot - * - * Copyright 2009 AbsoluteValue Systems - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - */ - -/dts-v1/; - -/ { - #address-cells = <1>; - #size-cells = <1>; - model = "est,hotfoot"; - compatible = "est,hotfoot"; - dcr-parent = <&{/cpus/cpu@0}>; - - aliases { - ethernet0 = &EMAC0; - ethernet1 = &EMAC1; - serial0 = &UART0; - serial1 = &UART1; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - model = "PowerPC,405EP"; - reg = <0x00000000>; - clock-frequency = <0>; /* Filled in by zImage */ - timebase-frequency = <0>; /* Filled in by zImage */ - i-cache-line-size = <0x20>; - d-cache-line-size = <0x20>; - i-cache-size = <0x4000>; - d-cache-size = <0x4000>; - dcr-controller; - dcr-access-method = "native"; - }; - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x00000000>; /* Filled in by zImage */ - }; - - UIC0: interrupt-controller { - compatible = "ibm,uic"; - interrupt-controller; - cell-index = <0>; - dcr-reg = <0x0c0 0x009>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - }; - - plb { - compatible = "ibm,plb3"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - clock-frequency = <0>; /* Filled in by zImage */ - - SDRAM0: memory-controller { - compatible = "ibm,sdram-405ep"; - dcr-reg = <0x010 0x002>; - }; - - MAL: mcmal { - compatible = "ibm,mcmal-405ep", "ibm,mcmal"; - dcr-reg = <0x180 0x062>; - num-tx-chans = <4>; - num-rx-chans = <2>; - interrupt-parent = <&UIC0>; - interrupts = < - 0xb 0x4 /* TXEOB */ - 0xc 0x4 /* RXEOB */ - 0xa 0x4 /* SERR */ - 0xd 0x4 /* TXDE */ - 0xe 0x4 /* RXDE */>; - }; - - POB0: opb { - compatible = "ibm,opb-405ep", "ibm,opb"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0xef600000 0xef600000 0x00a00000>; - dcr-reg = <0x0a0 0x005>; - clock-frequency = <0>; /* Filled in by zImage */ - - /* Hotfoot has UART0/UART1 swapped */ - - UART0: serial@ef600400 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0xef600400 0x00000008>; - virtual-reg = <0xef600400>; - clock-frequency = <0>; /* Filled in by zImage */ - current-speed = <0x9600>; - interrupt-parent = <&UIC0>; - interrupts = <0x1 0x4>; - }; - - UART1: serial@ef600300 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0xef600300 0x00000008>; - virtual-reg = <0xef600300>; - clock-frequency = <0>; /* Filled in by zImage */ - current-speed = <0x9600>; - interrupt-parent = <&UIC0>; - interrupts = <0x0 0x4>; - }; - - IIC: i2c@ef600500 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "ibm,iic-405ep", "ibm,iic"; - reg = <0xef600500 0x00000011>; - interrupt-parent = <&UIC0>; - interrupts = <0x2 0x4>; - - rtc@68 { - /* Actually a DS1339 */ - compatible = "dallas,ds1307"; - reg = <0x68>; - }; - - temp@4a { - /* Not present on all boards */ - compatible = "national,lm75"; - reg = <0x4a>; - }; - }; - - GPIO: gpio@ef600700 { - #gpio-cells = <2>; - compatible = "ibm,ppc4xx-gpio"; - reg = <0xef600700 0x00000020>; - gpio-controller; - }; - - gpio-leds { - compatible = "gpio-leds"; - status { - label = "Status"; - gpios = <&GPIO 1 0>; - }; - radiorx { - label = "Rx"; - gpios = <&GPIO 0xe 0>; - }; - }; - - EMAC0: ethernet@ef600800 { - linux,network-index = <0x0>; - device_type = "network"; - compatible = "ibm,emac-405ep", "ibm,emac"; - interrupt-parent = <&UIC0>; - interrupts = < - 0xf 0x4 /* Ethernet */ - 0x9 0x4 /* Ethernet Wake Up */>; - local-mac-address = [000000000000]; /* Filled in by zImage */ - reg = <0xef600800 0x00000070>; - mal-device = <&MAL>; - mal-tx-channel = <0>; - mal-rx-channel = <0>; - cell-index = <0>; - max-frame-size = <0x5dc>; - rx-fifo-size = <0x1000>; - tx-fifo-size = <0x800>; - phy-mode = "mii"; - phy-map = <0x00000000>; - }; - - EMAC1: ethernet@ef600900 { - linux,network-index = <0x1>; - device_type = "network"; - compatible = "ibm,emac-405ep", "ibm,emac"; - interrupt-parent = <&UIC0>; - interrupts = < - 0x11 0x4 /* Ethernet */ - 0x9 0x4 /* Ethernet Wake Up */>; - local-mac-address = [000000000000]; /* Filled in by zImage */ - reg = <0xef600900 0x00000070>; - mal-device = <&MAL>; - mal-tx-channel = <2>; - mal-rx-channel = <1>; - cell-index = <1>; - max-frame-size = <0x5dc>; - rx-fifo-size = <0x1000>; - tx-fifo-size = <0x800>; - mdio-device = <&EMAC0>; - phy-mode = "mii"; - phy-map = <0x0000001>; - }; - }; - - EBC0: ebc { - compatible = "ibm,ebc-405ep", "ibm,ebc"; - dcr-reg = <0x012 0x002>; - #address-cells = <2>; - #size-cells = <1>; - - /* The ranges property is supplied by the bootwrapper - * and is based on the firmware's configuration of the - * EBC bridge - */ - clock-frequency = <0>; /* Filled in by zImage */ - - nor_flash@0 { - compatible = "cfi-flash"; - bank-width = <2>; - reg = <0x0 0xff800000 0x00800000>; - #address-cells = <1>; - #size-cells = <1>; - - /* This mapping is for the 8M flash - 4M flash has all ofssets -= 4M, - and FeatFS partition is not present */ - partition@0 { - label = "Bootloader"; - reg = <0x7c0000 0x40000>; - /* read-only; */ - }; - partition@1 { - label = "Env_and_Config_Primary"; - reg = <0x400000 0x10000>; - }; - partition@2 { - label = "Kernel"; - reg = <0x420000 0x100000>; - }; - partition@3 { - label = "Filesystem"; - reg = <0x520000 0x2a0000>; - }; - partition@4 { - label = "Env_and_Config_Secondary"; - reg = <0x410000 0x10000>; - }; - partition@5 { - label = "FeatFS"; - reg = <0x000000 0x400000>; - }; - partition@6 { - label = "Bootloader_Env"; - reg = <0x7d0000 0x10000>; - }; - }; - }; - - PCI0: pci@ec000000 { - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - compatible = "ibm,plb405ep-pci", "ibm,plb-pci"; - primary; - reg = <0xeec00000 0x00000008 /* Config space access */ - 0xeed80000 0x00000004 /* IACK */ - 0xeed80000 0x00000004 /* Special cycle */ - 0xef480000 0x00000040>; /* Internal registers */ - - /* Outbound ranges, one memory and one IO, - * later cannot be changed. Chip supports a second - * IO range but we don't use it for now - */ - ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000 - 0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>; - - /* Inbound 2GB range starting at 0 */ - dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>; - - interrupt-parent = <&UIC0>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 3 -- slot1 (optional) 27/29 A/B IRQ2/4 */ - 0x1800 0x0 0x0 0x1 &UIC0 0x1b 0x8 - 0x1800 0x0 0x0 0x2 &UIC0 0x1d 0x8 - - /* IDSEL 4 -- slot0, 26/28 A/B IRQ1/3 */ - 0x2000 0x0 0x0 0x1 &UIC0 0x1a 0x8 - 0x2000 0x0 0x0 0x2 &UIC0 0x1c 0x8 - >; - }; - }; - - chosen { - stdout-path = &UART0; - }; -}; diff --git a/arch/powerpc/boot/dts/kilauea.dts b/arch/powerpc/boot/dts/kilauea.dts deleted file mode 100644 index c07a7525a72ce..0000000000000 --- a/arch/powerpc/boot/dts/kilauea.dts +++ /dev/null @@ -1,407 +0,0 @@ -/* - * Device Tree Source for AMCC Kilauea (405EX) - * - * Copyright 2007-2009 DENX Software Engineering, Stefan Roese - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - */ - -/dts-v1/; - -/ { - #address-cells = <1>; - #size-cells = <1>; - model = "amcc,kilauea"; - compatible = "amcc,kilauea"; - dcr-parent = <&{/cpus/cpu@0}>; - - aliases { - ethernet0 = &EMAC0; - ethernet1 = &EMAC1; - serial0 = &UART0; - serial1 = &UART1; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - model = "PowerPC,405EX"; - reg = <0x00000000>; - clock-frequency = <0>; /* Filled in by U-Boot */ - timebase-frequency = <0>; /* Filled in by U-Boot */ - i-cache-line-size = <32>; - d-cache-line-size = <32>; - i-cache-size = <16384>; /* 16 kB */ - d-cache-size = <16384>; /* 16 kB */ - dcr-controller; - dcr-access-method = "native"; - }; - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */ - }; - - UIC0: interrupt-controller { - compatible = "ibm,uic-405ex", "ibm,uic"; - interrupt-controller; - cell-index = <0>; - dcr-reg = <0x0c0 0x009>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - }; - - UIC1: interrupt-controller1 { - compatible = "ibm,uic-405ex","ibm,uic"; - interrupt-controller; - cell-index = <1>; - dcr-reg = <0x0d0 0x009>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ - interrupt-parent = <&UIC0>; - }; - - UIC2: interrupt-controller2 { - compatible = "ibm,uic-405ex","ibm,uic"; - interrupt-controller; - cell-index = <2>; - dcr-reg = <0x0e0 0x009>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */ - interrupt-parent = <&UIC0>; - }; - - CPM0: cpm { - compatible = "ibm,cpm"; - dcr-access-method = "native"; - dcr-reg = <0x0b0 0x003>; - unused-units = <0x00000000>; - idle-doze = <0x02000000>; - standby = <0xe3e74800>; - }; - - plb { - compatible = "ibm,plb-405ex", "ibm,plb4"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - clock-frequency = <0>; /* Filled in by U-Boot */ - - SDRAM0: memory-controller { - compatible = "ibm,sdram-405ex", "ibm,sdram-4xx-ddr2"; - dcr-reg = <0x010 0x002>; - interrupt-parent = <&UIC2>; - interrupts = <0x5 0x4 /* ECC DED Error */ - 0x6 0x4>; /* ECC SEC Error */ - }; - - CRYPTO: crypto@ef700000 { - compatible = "amcc,ppc405ex-crypto", "amcc,ppc4xx-crypto"; - reg = <0xef700000 0x80400>; - interrupt-parent = <&UIC0>; - interrupts = <0x17 0x2>; - }; - - MAL0: mcmal { - compatible = "ibm,mcmal-405ex", "ibm,mcmal2"; - dcr-reg = <0x180 0x062>; - num-tx-chans = <2>; - num-rx-chans = <2>; - interrupt-parent = <&MAL0>; - interrupts = <0x0 0x1 0x2 0x3 0x4>; - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = ; - interrupt-map-mask = <0xffffffff>; - }; - - POB0: opb { - compatible = "ibm,opb-405ex", "ibm,opb"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x80000000 0x80000000 0x10000000 - 0xef600000 0xef600000 0x00a00000 - 0xf0000000 0xf0000000 0x10000000>; - dcr-reg = <0x0a0 0x005>; - clock-frequency = <0>; /* Filled in by U-Boot */ - - EBC0: ebc { - compatible = "ibm,ebc-405ex", "ibm,ebc"; - dcr-reg = <0x012 0x002>; - #address-cells = <2>; - #size-cells = <1>; - clock-frequency = <0>; /* Filled in by U-Boot */ - /* ranges property is supplied by U-Boot */ - interrupts = <0x5 0x1>; - interrupt-parent = <&UIC1>; - - nor_flash@0,0 { - compatible = "amd,s29gl512n", "cfi-flash"; - bank-width = <2>; - reg = <0x00000000 0x00000000 0x04000000>; - #address-cells = <1>; - #size-cells = <1>; - partition@0 { - label = "kernel"; - reg = <0x00000000 0x001e0000>; - }; - partition@1e0000 { - label = "dtb"; - reg = <0x001e0000 0x00020000>; - }; - partition@200000 { - label = "root"; - reg = <0x00200000 0x00200000>; - }; - partition@400000 { - label = "user"; - reg = <0x00400000 0x03b60000>; - }; - partition@3f60000 { - label = "env"; - reg = <0x03f60000 0x00040000>; - }; - partition@3fa0000 { - label = "u-boot"; - reg = <0x03fa0000 0x00060000>; - }; - }; - - ndfc@1,0 { - compatible = "ibm,ndfc"; - reg = <0x00000001 0x00000000 0x00002000>; - ccr = <0x00001000>; - bank-settings = <0x80002222>; - #address-cells = <1>; - #size-cells = <1>; - - nand { - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x00000000 0x00100000>; - }; - partition@100000 { - label = "user"; - reg = <0x00000000 0x03f00000>; - }; - }; - }; - }; - - UART0: serial@ef600200 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0xef600200 0x00000008>; - virtual-reg = <0xef600200>; - clock-frequency = <0>; /* Filled in by U-Boot */ - current-speed = <0>; - interrupt-parent = <&UIC0>; - interrupts = <0x1a 0x4>; - }; - - UART1: serial@ef600300 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0xef600300 0x00000008>; - virtual-reg = <0xef600300>; - clock-frequency = <0>; /* Filled in by U-Boot */ - current-speed = <0>; - interrupt-parent = <&UIC0>; - interrupts = <0x1 0x4>; - }; - - IIC0: i2c@ef600400 { - compatible = "ibm,iic-405ex", "ibm,iic"; - reg = <0xef600400 0x00000014>; - interrupt-parent = <&UIC0>; - interrupts = <0x2 0x4>; - #address-cells = <1>; - #size-cells = <0>; - - rtc@68 { - compatible = "dallas,ds1338"; - reg = <0x68>; - }; - - dtt@48 { - compatible = "dallas,ds1775"; - reg = <0x48>; - }; - }; - - IIC1: i2c@ef600500 { - compatible = "ibm,iic-405ex", "ibm,iic"; - reg = <0xef600500 0x00000014>; - interrupt-parent = <&UIC0>; - interrupts = <0x7 0x4>; - }; - - RGMII0: emac-rgmii@ef600b00 { - compatible = "ibm,rgmii-405ex", "ibm,rgmii"; - reg = <0xef600b00 0x00000104>; - has-mdio; - }; - - EMAC0: ethernet@ef600900 { - linux,network-index = <0x0>; - device_type = "network"; - compatible = "ibm,emac-405ex", "ibm,emac4sync"; - interrupt-parent = <&EMAC0>; - interrupts = <0x0 0x1>; - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = ; - reg = <0xef600900 0x000000c4>; - local-mac-address = [000000000000]; /* Filled in by U-Boot */ - mal-device = <&MAL0>; - mal-tx-channel = <0>; - mal-rx-channel = <0>; - cell-index = <0>; - max-frame-size = <9000>; - rx-fifo-size = <4096>; - tx-fifo-size = <2048>; - rx-fifo-size-gige = <16384>; - tx-fifo-size-gige = <16384>; - phy-mode = "rgmii"; - phy-map = <0x00000000>; - rgmii-device = <&RGMII0>; - rgmii-channel = <0>; - has-inverted-stacr-oc; - has-new-stacr-staopc; - }; - - EMAC1: ethernet@ef600a00 { - linux,network-index = <0x1>; - device_type = "network"; - compatible = "ibm,emac-405ex", "ibm,emac4sync"; - interrupt-parent = <&EMAC1>; - interrupts = <0x0 0x1>; - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = ; - reg = <0xef600a00 0x000000c4>; - local-mac-address = [000000000000]; /* Filled in by U-Boot */ - mal-device = <&MAL0>; - mal-tx-channel = <1>; - mal-rx-channel = <1>; - cell-index = <1>; - max-frame-size = <9000>; - rx-fifo-size = <4096>; - tx-fifo-size = <2048>; - rx-fifo-size-gige = <16384>; - tx-fifo-size-gige = <16384>; - phy-mode = "rgmii"; - phy-map = <0x00000000>; - rgmii-device = <&RGMII0>; - rgmii-channel = <1>; - has-inverted-stacr-oc; - has-new-stacr-staopc; - }; - }; - - PCIE0: pcie@a0000000 { - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex"; - primary; - port = <0x0>; /* port number */ - reg = <0xa0000000 0x20000000 /* Config space access */ - 0xef000000 0x00001000>; /* Registers */ - dcr-reg = <0x040 0x020>; - sdr-base = <0x400>; - - /* Outbound ranges, one memory and one IO, - * later cannot be changed - */ - ranges = <0x02000000 0x00000000 0x80000000 0x90000000 0x00000000 0x08000000 - 0x01000000 0x00000000 0x00000000 0xe0000000 0x00000000 0x00010000>; - - /* Inbound 2GB range starting at 0 */ - dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>; - - /* This drives busses 0x00 to 0x3f */ - bus-range = <0x0 0x3f>; - - /* Legacy interrupts (note the weird polarity, the bridge seems - * to invert PCIe legacy interrupts). - * We are de-swizzling here because the numbers are actually for - * port of the root complex virtual P2P bridge. But I want - * to avoid putting a node for it in the tree, so the numbers - * below are basically de-swizzled numbers. - * The real slot is on idsel 0, so the swizzling is 1:1 - */ - interrupt-map-mask = <0x0 0x0 0x0 0x7>; - interrupt-map = < - 0x0 0x0 0x0 0x1 &UIC2 0x0 0x4 /* swizzled int A */ - 0x0 0x0 0x0 0x2 &UIC2 0x1 0x4 /* swizzled int B */ - 0x0 0x0 0x0 0x3 &UIC2 0x2 0x4 /* swizzled int C */ - 0x0 0x0 0x0 0x4 &UIC2 0x3 0x4 /* swizzled int D */>; - }; - - PCIE1: pcie@c0000000 { - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex"; - primary; - port = <0x1>; /* port number */ - reg = <0xc0000000 0x20000000 /* Config space access */ - 0xef001000 0x00001000>; /* Registers */ - dcr-reg = <0x060 0x020>; - sdr-base = <0x440>; - - /* Outbound ranges, one memory and one IO, - * later cannot be changed - */ - ranges = <0x02000000 0x00000000 0x80000000 0x98000000 0x00000000 0x08000000 - 0x01000000 0x00000000 0x00000000 0xe0010000 0x00000000 0x00010000>; - - /* Inbound 2GB range starting at 0 */ - dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>; - - /* This drives busses 0x40 to 0x7f */ - bus-range = <0x40 0x7f>; - - /* Legacy interrupts (note the weird polarity, the bridge seems - * to invert PCIe legacy interrupts). - * We are de-swizzling here because the numbers are actually for - * port of the root complex virtual P2P bridge. But I want - * to avoid putting a node for it in the tree, so the numbers - * below are basically de-swizzled numbers. - * The real slot is on idsel 0, so the swizzling is 1:1 - */ - interrupt-map-mask = <0x0 0x0 0x0 0x7>; - interrupt-map = < - 0x0 0x0 0x0 0x1 &UIC2 0xb 0x4 /* swizzled int A */ - 0x0 0x0 0x0 0x2 &UIC2 0xc 0x4 /* swizzled int B */ - 0x0 0x0 0x0 0x3 &UIC2 0xd 0x4 /* swizzled int C */ - 0x0 0x0 0x0 0x4 &UIC2 0xe 0x4 /* swizzled int D */>; - }; - }; -}; diff --git a/arch/powerpc/boot/dts/klondike.dts b/arch/powerpc/boot/dts/klondike.dts deleted file mode 100644 index 97432177892ac..0000000000000 --- a/arch/powerpc/boot/dts/klondike.dts +++ /dev/null @@ -1,212 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Device Tree for Klondike (APM8018X) board. - * - * Copyright (c) 2010, Applied Micro Circuits Corporation - * Author: Tanmay Inamdar - */ - -/dts-v1/; - -/ { - #address-cells = <1>; - #size-cells = <1>; - model = "apm,klondike"; - compatible = "apm,klondike"; - dcr-parent = <&{/cpus/cpu@0}>; - - aliases { - ethernet0 = &EMAC0; - ethernet1 = &EMAC1; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - model = "PowerPC,apm8018x"; - reg = <0x00000000>; - clock-frequency = <300000000>; /* Filled in by U-Boot */ - timebase-frequency = <300000000>; /* Filled in by U-Boot */ - i-cache-line-size = <32>; - d-cache-line-size = <32>; - i-cache-size = <16384>; /* 16 kB */ - d-cache-size = <16384>; /* 16 kB */ - dcr-controller; - dcr-access-method = "native"; - }; - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x20000000>; /* Filled in by U-Boot */ - }; - - UIC0: interrupt-controller { - compatible = "ibm,uic"; - interrupt-controller; - cell-index = <0>; - dcr-reg = <0x0c0 0x010>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - }; - - UIC1: interrupt-controller1 { - compatible = "ibm,uic"; - interrupt-controller; - cell-index = <1>; - dcr-reg = <0x0d0 0x010>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ - interrupt-parent = <&UIC0>; - }; - - UIC2: interrupt-controller2 { - compatible = "ibm,uic"; - interrupt-controller; - cell-index = <2>; - dcr-reg = <0x0e0 0x010>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - interrupts = <0x0a 0x4 0x0b 0x4>; /* cascade */ - interrupt-parent = <&UIC0>; - }; - - UIC3: interrupt-controller3 { - compatible = "ibm,uic"; - interrupt-controller; - cell-index = <3>; - dcr-reg = <0x0f0 0x010>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - interrupts = <0x10 0x4 0x11 0x4>; /* cascade */ - interrupt-parent = <&UIC0>; - }; - - plb { - compatible = "ibm,plb4"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - clock-frequency = <0>; /* Filled in by U-Boot */ - - SDRAM0: memory-controller { - compatible = "ibm,sdram-apm8018x"; - dcr-reg = <0x010 0x002>; - }; - - MAL0: mcmal { - compatible = "ibm,mcmal2"; - dcr-reg = <0x180 0x062>; - num-tx-chans = <2>; - num-rx-chans = <16>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-parent = <&UIC1>; - interrupts = ; - }; - - POB0: opb { - compatible = "ibm,opb"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x20000000 0x20000000 0x30000000 - 0x50000000 0x50000000 0x10000000 - 0x60000000 0x60000000 0x10000000 - 0xFE000000 0xFE000000 0x00010000>; - dcr-reg = <0x100 0x020>; - clock-frequency = <300000000>; /* Filled in by U-Boot */ - - RGMII0: emac-rgmii@400a2000 { - compatible = "ibm,rgmii"; - reg = <0x400a2000 0x00000010>; - has-mdio; - }; - - TAH0: emac-tah@400a3000 { - compatible = "ibm,tah"; - reg = <0x400a3000 0x100>; - }; - - TAH1: emac-tah@400a4000 { - compatible = "ibm,tah"; - reg = <0x400a4000 0x100>; - }; - - EMAC0: ethernet@400a0000 { - compatible = "ibm,emac4", "ibm-emac4sync"; - interrupt-parent = <&EMAC0>; - interrupts = <0x0>; - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = ; - reg = <0x400a0000 0x00000100>; - local-mac-address = [000000000000]; /* Filled in by U-Boot */ - mal-device = <&MAL0>; - mal-tx-channel = <0x0>; - mal-rx-channel = <0x0>; - cell-index = <0>; - max-frame-size = <9000>; - rx-fifo-size = <4096>; - tx-fifo-size = <2048>; - phy-mode = "rgmii"; - phy-address = <0x2>; - turbo = "no"; - phy-map = <0x00000000>; - rgmii-device = <&RGMII0>; - rgmii-channel = <0>; - tah-device = <&TAH0>; - tah-channel = <0>; - has-inverted-stacr-oc; - has-new-stacr-staopc; - }; - - EMAC1: ethernet@400a1000 { - compatible = "ibm,emac4", "ibm-emac4sync"; - status = "disabled"; - interrupt-parent = <&EMAC1>; - interrupts = <0x0>; - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = ; - reg = <0x400a1000 0x00000100>; - local-mac-address = [000000000000]; /* Filled in by U-Boot */ - mal-device = <&MAL0>; - mal-tx-channel = <1>; - mal-rx-channel = <8>; - cell-index = <1>; - max-frame-size = <9000>; - rx-fifo-size = <4096>; - tx-fifo-size = <2048>; - phy-mode = "rgmii"; - phy-address = <0x3>; - turbo = "no"; - phy-map = <0x00000000>; - rgmii-device = <&RGMII0>; - rgmii-channel = <1>; - tah-device = <&TAH1>; - tah-channel = <0>; - has-inverted-stacr-oc; - has-new-stacr-staopc; - mdio-device = <&EMAC0>; - }; - }; - }; - - chosen { - stdout-path = "/plb/opb/serial@50001000"; - }; -}; diff --git a/arch/powerpc/boot/dts/makalu.dts b/arch/powerpc/boot/dts/makalu.dts deleted file mode 100644 index c473cd911bca0..0000000000000 --- a/arch/powerpc/boot/dts/makalu.dts +++ /dev/null @@ -1,353 +0,0 @@ -/* - * Device Tree Source for AMCC Makalu (405EX) - * - * Copyright 2007 DENX Software Engineering, Stefan Roese - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - */ - -/dts-v1/; - -/ { - #address-cells = <1>; - #size-cells = <1>; - model = "amcc,makalu"; - compatible = "amcc,makalu"; - dcr-parent = <&{/cpus/cpu@0}>; - - aliases { - ethernet0 = &EMAC0; - ethernet1 = &EMAC1; - serial0 = &UART0; - serial1 = &UART1; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - model = "PowerPC,405EX"; - reg = <0x00000000>; - clock-frequency = <0>; /* Filled in by U-Boot */ - timebase-frequency = <0>; /* Filled in by U-Boot */ - i-cache-line-size = <32>; - d-cache-line-size = <32>; - i-cache-size = <16384>; /* 16 kB */ - d-cache-size = <16384>; /* 16 kB */ - dcr-controller; - dcr-access-method = "native"; - }; - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */ - }; - - UIC0: interrupt-controller { - compatible = "ibm,uic-405ex", "ibm,uic"; - interrupt-controller; - cell-index = <0>; - dcr-reg = <0x0c0 0x009>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - }; - - UIC1: interrupt-controller1 { - compatible = "ibm,uic-405ex","ibm,uic"; - interrupt-controller; - cell-index = <1>; - dcr-reg = <0x0d0 0x009>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ - interrupt-parent = <&UIC0>; - }; - - UIC2: interrupt-controller2 { - compatible = "ibm,uic-405ex","ibm,uic"; - interrupt-controller; - cell-index = <2>; - dcr-reg = <0x0e0 0x009>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */ - interrupt-parent = <&UIC0>; - }; - - plb { - compatible = "ibm,plb-405ex", "ibm,plb4"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - clock-frequency = <0>; /* Filled in by U-Boot */ - - SDRAM0: memory-controller { - compatible = "ibm,sdram-405ex", "ibm,sdram-4xx-ddr2"; - dcr-reg = <0x010 0x002>; - interrupt-parent = <&UIC2>; - interrupts = <0x5 0x4 /* ECC DED Error */ - 0x6 0x4 /* ECC SEC Error */ >; - }; - - MAL0: mcmal { - compatible = "ibm,mcmal-405ex", "ibm,mcmal2"; - dcr-reg = <0x180 0x062>; - num-tx-chans = <2>; - num-rx-chans = <2>; - interrupt-parent = <&MAL0>; - interrupts = <0x0 0x1 0x2 0x3 0x4>; - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = ; - interrupt-map-mask = <0xffffffff>; - }; - - POB0: opb { - compatible = "ibm,opb-405ex", "ibm,opb"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x80000000 0x80000000 0x10000000 - 0xef600000 0xef600000 0x00a00000 - 0xf0000000 0xf0000000 0x10000000>; - dcr-reg = <0x0a0 0x005>; - clock-frequency = <0>; /* Filled in by U-Boot */ - - EBC0: ebc { - compatible = "ibm,ebc-405ex", "ibm,ebc"; - dcr-reg = <0x012 0x002>; - #address-cells = <2>; - #size-cells = <1>; - clock-frequency = <0>; /* Filled in by U-Boot */ - /* ranges property is supplied by U-Boot */ - interrupts = <0x5 0x1>; - interrupt-parent = <&UIC1>; - - nor_flash@0,0 { - compatible = "amd,s29gl512n", "cfi-flash"; - bank-width = <2>; - reg = <0x00000000 0x00000000 0x04000000>; - #address-cells = <1>; - #size-cells = <1>; - partition@0 { - label = "kernel"; - reg = <0x00000000 0x00200000>; - }; - partition@200000 { - label = "root"; - reg = <0x00200000 0x00200000>; - }; - partition@400000 { - label = "user"; - reg = <0x00400000 0x03b60000>; - }; - partition@3f60000 { - label = "env"; - reg = <0x03f60000 0x00040000>; - }; - partition@3fa0000 { - label = "u-boot"; - reg = <0x03fa0000 0x00060000>; - }; - }; - }; - - UART0: serial@ef600200 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0xef600200 0x00000008>; - virtual-reg = <0xef600200>; - clock-frequency = <0>; /* Filled in by U-Boot */ - current-speed = <0>; - interrupt-parent = <&UIC0>; - interrupts = <0x1a 0x4>; - }; - - UART1: serial@ef600300 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0xef600300 0x00000008>; - virtual-reg = <0xef600300>; - clock-frequency = <0>; /* Filled in by U-Boot */ - current-speed = <0>; - interrupt-parent = <&UIC0>; - interrupts = <0x1 0x4>; - }; - - IIC0: i2c@ef600400 { - compatible = "ibm,iic-405ex", "ibm,iic"; - reg = <0xef600400 0x00000014>; - interrupt-parent = <&UIC0>; - interrupts = <0x2 0x4>; - }; - - IIC1: i2c@ef600500 { - compatible = "ibm,iic-405ex", "ibm,iic"; - reg = <0xef600500 0x00000014>; - interrupt-parent = <&UIC0>; - interrupts = <0x7 0x4>; - }; - - - RGMII0: emac-rgmii@ef600b00 { - compatible = "ibm,rgmii-405ex", "ibm,rgmii"; - reg = <0xef600b00 0x00000104>; - has-mdio; - }; - - EMAC0: ethernet@ef600900 { - linux,network-index = <0x0>; - device_type = "network"; - compatible = "ibm,emac-405ex", "ibm,emac4sync"; - interrupt-parent = <&EMAC0>; - interrupts = <0x0 0x1>; - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = ; - reg = <0xef600900 0x000000c4>; - local-mac-address = [000000000000]; /* Filled in by U-Boot */ - mal-device = <&MAL0>; - mal-tx-channel = <0>; - mal-rx-channel = <0>; - cell-index = <0>; - max-frame-size = <9000>; - rx-fifo-size = <4096>; - tx-fifo-size = <2048>; - rx-fifo-size-gige = <16384>; - tx-fifo-size-gige = <16384>; - phy-mode = "rgmii"; - phy-map = <0x0000003f>; /* Start at 6 */ - rgmii-device = <&RGMII0>; - rgmii-channel = <0>; - has-inverted-stacr-oc; - has-new-stacr-staopc; - }; - - EMAC1: ethernet@ef600a00 { - linux,network-index = <0x1>; - device_type = "network"; - compatible = "ibm,emac-405ex", "ibm,emac4sync"; - interrupt-parent = <&EMAC1>; - interrupts = <0x0 0x1>; - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = ; - reg = <0xef600a00 0x000000c4>; - local-mac-address = [000000000000]; /* Filled in by U-Boot */ - mal-device = <&MAL0>; - mal-tx-channel = <1>; - mal-rx-channel = <1>; - cell-index = <1>; - max-frame-size = <9000>; - rx-fifo-size = <4096>; - tx-fifo-size = <2048>; - rx-fifo-size-gige = <16384>; - tx-fifo-size-gige = <16384>; - phy-mode = "rgmii"; - phy-map = <0x00000000>; - rgmii-device = <&RGMII0>; - rgmii-channel = <1>; - has-inverted-stacr-oc; - has-new-stacr-staopc; - }; - }; - - PCIE0: pcie@a0000000 { - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex"; - primary; - port = <0x0>; /* port number */ - reg = <0xa0000000 0x20000000 /* Config space access */ - 0xef000000 0x00001000>; /* Registers */ - dcr-reg = <0x040 0x020>; - sdr-base = <0x400>; - - /* Outbound ranges, one memory and one IO, - * later cannot be changed - */ - ranges = <0x02000000 0x00000000 0x80000000 0x90000000 0x00000000 0x08000000 - 0x01000000 0x00000000 0x00000000 0xe0000000 0x00000000 0x00010000>; - - /* Inbound 2GB range starting at 0 */ - dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>; - - /* This drives busses 0x00 to 0x3f */ - bus-range = <0x0 0x3f>; - - /* Legacy interrupts (note the weird polarity, the bridge seems - * to invert PCIe legacy interrupts). - * We are de-swizzling here because the numbers are actually for - * port of the root complex virtual P2P bridge. But I want - * to avoid putting a node for it in the tree, so the numbers - * below are basically de-swizzled numbers. - * The real slot is on idsel 0, so the swizzling is 1:1 - */ - interrupt-map-mask = <0x0 0x0 0x0 0x7>; - interrupt-map = < - 0x0 0x0 0x0 0x1 &UIC2 0x0 0x4 /* swizzled int A */ - 0x0 0x0 0x0 0x2 &UIC2 0x1 0x4 /* swizzled int B */ - 0x0 0x0 0x0 0x3 &UIC2 0x2 0x4 /* swizzled int C */ - 0x0 0x0 0x0 0x4 &UIC2 0x3 0x4 /* swizzled int D */>; - }; - - PCIE1: pcie@c0000000 { - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex"; - primary; - port = <0x1>; /* port number */ - reg = <0xc0000000 0x20000000 /* Config space access */ - 0xef001000 0x00001000>; /* Registers */ - dcr-reg = <0x060 0x020>; - sdr-base = <0x440>; - - /* Outbound ranges, one memory and one IO, - * later cannot be changed - */ - ranges = <0x02000000 0x00000000 0x80000000 0x98000000 0x00000000 0x08000000 - 0x01000000 0x00000000 0x00000000 0xe0010000 0x00000000 0x00010000>; - - /* Inbound 2GB range starting at 0 */ - dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>; - - /* This drives busses 0x40 to 0x7f */ - bus-range = <0x40 0x7f>; - - /* Legacy interrupts (note the weird polarity, the bridge seems - * to invert PCIe legacy interrupts). - * We are de-swizzling here because the numbers are actually for - * port of the root complex virtual P2P bridge. But I want - * to avoid putting a node for it in the tree, so the numbers - * below are basically de-swizzled numbers. - * The real slot is on idsel 0, so the swizzling is 1:1 - */ - interrupt-map-mask = <0x0 0x0 0x0 0x7>; - interrupt-map = < - 0x0 0x0 0x0 0x1 &UIC2 0xb 0x4 /* swizzled int A */ - 0x0 0x0 0x0 0x2 &UIC2 0xc 0x4 /* swizzled int B */ - 0x0 0x0 0x0 0x3 &UIC2 0xd 0x4 /* swizzled int C */ - 0x0 0x0 0x0 0x4 &UIC2 0xe 0x4 /* swizzled int D */>; - }; - }; -}; diff --git a/arch/powerpc/boot/dts/obs600.dts b/arch/powerpc/boot/dts/obs600.dts deleted file mode 100644 index d10b0411809b4..0000000000000 --- a/arch/powerpc/boot/dts/obs600.dts +++ /dev/null @@ -1,314 +0,0 @@ -/* - * Device Tree Source for PlatHome OpenBlockS 600 (405EX) - * - * Copyright 2011 Ben Herrenschmidt, IBM Corp. - * - * Based on Kilauea by: - * - * Copyright 2007-2009 DENX Software Engineering, Stefan Roese - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - */ - -/dts-v1/; - -/ { - #address-cells = <1>; - #size-cells = <1>; - model = "PlatHome,OpenBlockS 600"; - compatible = "plathome,obs600"; - dcr-parent = <&{/cpus/cpu@0}>; - - aliases { - ethernet0 = &EMAC0; - ethernet1 = &EMAC1; - serial0 = &UART0; - serial1 = &UART1; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - model = "PowerPC,405EX"; - reg = <0x00000000>; - clock-frequency = <0>; /* Filled in by U-Boot */ - timebase-frequency = <0>; /* Filled in by U-Boot */ - i-cache-line-size = <32>; - d-cache-line-size = <32>; - i-cache-size = <16384>; /* 16 kB */ - d-cache-size = <16384>; /* 16 kB */ - dcr-controller; - dcr-access-method = "native"; - }; - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */ - }; - - UIC0: interrupt-controller { - compatible = "ibm,uic-405ex", "ibm,uic"; - interrupt-controller; - cell-index = <0>; - dcr-reg = <0x0c0 0x009>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - }; - - UIC1: interrupt-controller1 { - compatible = "ibm,uic-405ex","ibm,uic"; - interrupt-controller; - cell-index = <1>; - dcr-reg = <0x0d0 0x009>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ - interrupt-parent = <&UIC0>; - }; - - UIC2: interrupt-controller2 { - compatible = "ibm,uic-405ex","ibm,uic"; - interrupt-controller; - cell-index = <2>; - dcr-reg = <0x0e0 0x009>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */ - interrupt-parent = <&UIC0>; - }; - - CPM0: cpm { - compatible = "ibm,cpm"; - dcr-access-method = "native"; - dcr-reg = <0x0b0 0x003>; - unused-units = <0x00000000>; - idle-doze = <0x02000000>; - standby = <0xe3e74800>; - }; - - plb { - compatible = "ibm,plb-405ex", "ibm,plb4"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - clock-frequency = <0>; /* Filled in by U-Boot */ - - SDRAM0: memory-controller { - compatible = "ibm,sdram-405ex", "ibm,sdram-4xx-ddr2"; - dcr-reg = <0x010 0x002>; - interrupt-parent = <&UIC2>; - interrupts = <0x5 0x4 /* ECC DED Error */ - 0x6 0x4>; /* ECC SEC Error */ - }; - - CRYPTO: crypto@ef700000 { - compatible = "amcc,ppc405ex-crypto", "amcc,ppc4xx-crypto"; - reg = <0xef700000 0x80400>; - interrupt-parent = <&UIC0>; - interrupts = <0x17 0x2>; - }; - - MAL0: mcmal { - compatible = "ibm,mcmal-405ex", "ibm,mcmal2"; - dcr-reg = <0x180 0x062>; - num-tx-chans = <2>; - num-rx-chans = <2>; - interrupt-parent = <&MAL0>; - interrupts = <0x0 0x1 0x2 0x3 0x4>; - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = ; - interrupt-map-mask = <0xffffffff>; - }; - - POB0: opb { - compatible = "ibm,opb-405ex", "ibm,opb"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x80000000 0x80000000 0x10000000 - 0xef600000 0xef600000 0x00a00000 - 0xf0000000 0xf0000000 0x10000000>; - dcr-reg = <0x0a0 0x005>; - clock-frequency = <0>; /* Filled in by U-Boot */ - - EBC0: ebc { - compatible = "ibm,ebc-405ex", "ibm,ebc"; - dcr-reg = <0x012 0x002>; - #address-cells = <2>; - #size-cells = <1>; - clock-frequency = <0>; /* Filled in by U-Boot */ - /* ranges property is supplied by U-Boot */ - interrupts = <0x5 0x1>; - interrupt-parent = <&UIC1>; - - nor_flash@0,0 { - compatible = "amd,s29gl512n", "cfi-flash"; - bank-width = <2>; - reg = <0x00000000 0x00000000 0x08000000>; - #address-cells = <1>; - #size-cells = <1>; - partition@0 { - label = "kernel + initrd"; - reg = <0x00000000 0x03de0000>; - }; - partition@3de0000 { - label = "user config area"; - reg = <0x03de0000 0x00080000>; - }; - partition@3e60000 { - label = "user program area"; - reg = <0x03e60000 0x04000000>; - }; - partition@7e60000 { - label = "flat device tree"; - reg = <0x07e60000 0x00080000>; - }; - partition@7ee0000 { - label = "test program"; - reg = <0x07ee0000 0x00080000>; - }; - partition@7f60000 { - label = "u-boot env"; - reg = <0x07f60000 0x00040000>; - }; - partition@7fa0000 { - label = "u-boot"; - reg = <0x07fa0000 0x00060000>; - }; - }; - }; - - UART0: serial@ef600200 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0xef600200 0x00000008>; - virtual-reg = <0xef600200>; - clock-frequency = <0>; /* Filled in by U-Boot */ - current-speed = <0>; - interrupt-parent = <&UIC0>; - interrupts = <0x1a 0x4>; - }; - - UART1: serial@ef600300 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0xef600300 0x00000008>; - virtual-reg = <0xef600300>; - clock-frequency = <0>; /* Filled in by U-Boot */ - current-speed = <0>; - interrupt-parent = <&UIC0>; - interrupts = <0x1 0x4>; - }; - - IIC0: i2c@ef600400 { - compatible = "ibm,iic-405ex", "ibm,iic"; - reg = <0xef600400 0x00000014>; - interrupt-parent = <&UIC0>; - interrupts = <0x2 0x4>; - #address-cells = <1>; - #size-cells = <0>; - - rtc@68 { - compatible = "dallas,ds1340"; - reg = <0x68>; - }; - }; - - IIC1: i2c@ef600500 { - compatible = "ibm,iic-405ex", "ibm,iic"; - reg = <0xef600500 0x00000014>; - interrupt-parent = <&UIC0>; - interrupts = <0x7 0x4>; - }; - - RGMII0: emac-rgmii@ef600b00 { - compatible = "ibm,rgmii-405ex", "ibm,rgmii"; - reg = <0xef600b00 0x00000104>; - has-mdio; - }; - - EMAC0: ethernet@ef600900 { - linux,network-index = <0x0>; - device_type = "network"; - compatible = "ibm,emac-405ex", "ibm,emac4sync"; - interrupt-parent = <&EMAC0>; - interrupts = <0x0 0x1>; - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = ; - reg = <0xef600900 0x000000c4>; - local-mac-address = [000000000000]; /* Filled in by U-Boot */ - mal-device = <&MAL0>; - mal-tx-channel = <0>; - mal-rx-channel = <0>; - cell-index = <0>; - max-frame-size = <9000>; - rx-fifo-size = <4096>; - tx-fifo-size = <2048>; - rx-fifo-size-gige = <16384>; - tx-fifo-size-gige = <16384>; - phy-mode = "rgmii"; - phy-map = <0x00000000>; - rgmii-device = <&RGMII0>; - rgmii-channel = <0>; - has-inverted-stacr-oc; - has-new-stacr-staopc; - }; - - EMAC1: ethernet@ef600a00 { - linux,network-index = <0x1>; - device_type = "network"; - compatible = "ibm,emac-405ex", "ibm,emac4sync"; - interrupt-parent = <&EMAC1>; - interrupts = <0x0 0x1>; - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = ; - reg = <0xef600a00 0x000000c4>; - local-mac-address = [000000000000]; /* Filled in by U-Boot */ - mal-device = <&MAL0>; - mal-tx-channel = <1>; - mal-rx-channel = <1>; - cell-index = <1>; - max-frame-size = <9000>; - rx-fifo-size = <4096>; - tx-fifo-size = <2048>; - rx-fifo-size-gige = <16384>; - tx-fifo-size-gige = <16384>; - phy-mode = "rgmii"; - phy-map = <0x00000000>; - rgmii-device = <&RGMII0>; - rgmii-channel = <1>; - has-inverted-stacr-oc; - has-new-stacr-staopc; - }; - - GPIO: gpio@ef600800 { - device_type = "gpio"; - compatible = "ibm,gpio-405ex", "ibm,ppc4xx-gpio"; - reg = <0xef600800 0x50>; - }; - }; - }; - chosen { - stdout-path = "/plb/opb/serial@ef600200"; - }; -}; diff --git a/arch/powerpc/boot/ppcboot-hotfoot.h b/arch/powerpc/boot/ppcboot-hotfoot.h deleted file mode 100644 index 4728db95f58a7..0000000000000 --- a/arch/powerpc/boot/ppcboot-hotfoot.h +++ /dev/null @@ -1,119 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * This interface is used for compatibility with old U-boots *ONLY*. - * Please do not imitate or extend this. - */ - -/* - * Unfortunately, the ESTeem Hotfoot board uses a mangled version of - * ppcboot.h for historical reasons, and in the interest of having a - * mainline kernel boot on the production board+bootloader, this was the - * least-offensive solution. Please direct all flames to: - * - * Solomon Peachy - * - * (This header is identical to ppcboot.h except for the - * TARGET_HOTFOOT bits) - */ - -/* - * (C) Copyright 2000, 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - */ - -#ifndef __PPCBOOT_H__ -#define __PPCBOOT_H__ - -/* - * Board information passed to kernel from PPCBoot - * - * include/asm-ppc/ppcboot.h - */ - -#include "types.h" - -typedef struct bd_info { - unsigned long bi_memstart; /* start of DRAM memory */ - unsigned long bi_memsize; /* size of DRAM memory in bytes */ - unsigned long bi_flashstart; /* start of FLASH memory */ - unsigned long bi_flashsize; /* size of FLASH memory */ - unsigned long bi_flashoffset; /* reserved area for startup monitor */ - unsigned long bi_sramstart; /* start of SRAM memory */ - unsigned long bi_sramsize; /* size of SRAM memory */ -#if defined(TARGET_8xx) || defined(TARGET_CPM2) || defined(TARGET_85xx) ||\ - defined(TARGET_83xx) - unsigned long bi_immr_base; /* base of IMMR register */ -#endif -#if defined(TARGET_PPC_MPC52xx) - unsigned long bi_mbar_base; /* base of internal registers */ -#endif - unsigned long bi_bootflags; /* boot / reboot flag (for LynxOS) */ - unsigned long bi_ip_addr; /* IP Address */ - unsigned char bi_enetaddr[6]; /* Ethernet address */ -#if defined(TARGET_HOTFOOT) - /* second onboard ethernet port */ - unsigned char bi_enet1addr[6]; -#define HAVE_ENET1ADDR -#endif /* TARGET_HOOTFOOT */ - unsigned short bi_ethspeed; /* Ethernet speed in Mbps */ - unsigned long bi_intfreq; /* Internal Freq, in MHz */ - unsigned long bi_busfreq; /* Bus Freq, in MHz */ -#if defined(TARGET_CPM2) - unsigned long bi_cpmfreq; /* CPM_CLK Freq, in MHz */ - unsigned long bi_brgfreq; /* BRG_CLK Freq, in MHz */ - unsigned long bi_sccfreq; /* SCC_CLK Freq, in MHz */ - unsigned long bi_vco; /* VCO Out from PLL, in MHz */ -#endif -#if defined(TARGET_PPC_MPC52xx) - unsigned long bi_ipbfreq; /* IPB Bus Freq, in MHz */ - unsigned long bi_pcifreq; /* PCI Bus Freq, in MHz */ -#endif - unsigned long bi_baudrate; /* Console Baudrate */ -#if defined(TARGET_4xx) - unsigned char bi_s_version[4]; /* Version of this structure */ - unsigned char bi_r_version[32]; /* Version of the ROM (IBM) */ - unsigned int bi_procfreq; /* CPU (Internal) Freq, in Hz */ - unsigned int bi_plb_busfreq; /* PLB Bus speed, in Hz */ - unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */ - unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */ -#endif -#if defined(TARGET_HOTFOOT) - unsigned int bi_pllouta_freq; /* PLL OUTA speed, in Hz */ -#endif -#if defined(TARGET_HYMOD) - hymod_conf_t bi_hymod_conf; /* hymod configuration information */ -#endif -#if defined(TARGET_EVB64260) || defined(TARGET_405EP) || defined(TARGET_44x) || \ - defined(TARGET_85xx) || defined(TARGET_83xx) || defined(TARGET_HAS_ETH1) - /* second onboard ethernet port */ - unsigned char bi_enet1addr[6]; -#define HAVE_ENET1ADDR -#endif -#if defined(TARGET_EVB64260) || defined(TARGET_440GX) || \ - defined(TARGET_85xx) || defined(TARGET_HAS_ETH2) - /* third onboard ethernet ports */ - unsigned char bi_enet2addr[6]; -#define HAVE_ENET2ADDR -#endif -#if defined(TARGET_440GX) || defined(TARGET_HAS_ETH3) - /* fourth onboard ethernet ports */ - unsigned char bi_enet3addr[6]; -#define HAVE_ENET3ADDR -#endif -#if defined(TARGET_HOTFOOT) - int bi_phynum[2]; /* Determines phy mapping */ - int bi_phymode[2]; /* Determines phy mode */ -#endif -#if defined(TARGET_4xx) - unsigned int bi_opbfreq; /* OB clock in Hz */ - int bi_iic_fast[2]; /* Use fast i2c mode */ -#endif -#if defined(TARGET_440GX) - int bi_phynum[4]; /* phy mapping */ - int bi_phymode[4]; /* phy mode */ -#endif -} bd_t; - -#define bi_tbfreq bi_intfreq - -#endif /* __PPCBOOT_H__ */ diff --git a/arch/powerpc/boot/ppcboot.h b/arch/powerpc/boot/ppcboot.h index a78b0b2576988..90c8f452fe6e2 100644 --- a/arch/powerpc/boot/ppcboot.h +++ b/arch/powerpc/boot/ppcboot.h @@ -63,7 +63,7 @@ typedef struct bd_info { #if defined(TARGET_HYMOD) hymod_conf_t bi_hymod_conf; /* hymod configuration information */ #endif -#if defined(TARGET_EVB64260) || defined(TARGET_405EP) || defined(TARGET_44x) || \ +#if defined(TARGET_EVB64260) || defined(TARGET_44x) || \ defined(TARGET_85xx) || defined(TARGET_83xx) || defined(TARGET_HAS_ETH1) /* second onboard ethernet port */ unsigned char bi_enet1addr[6]; diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper index 352d7de24018f..585c4ea27ab92 100755 --- a/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper @@ -468,26 +468,6 @@ uboot) fi exit 0 ;; -uboot-obs600) - rm -f "$ofile" - # obs600 wants a multi image with an initrd, so we need to put a fake - # one in even when building a "normal" image. - if [ -n "$initrd" ]; then - real_rd="$initrd" - else - real_rd=`mktemp` - echo "\0" >>"$real_rd" - fi - ${MKIMAGE} -A ppc -O linux -T multi -C gzip -a $membase -e $membase \ - $uboot_version -d "$vmz":"$real_rd":"$dtb" "$ofile" - if [ -z "$initrd" ]; then - rm -f "$real_rd" - fi - if [ -z "$cacheit" ]; then - rm -f "$vmz" - fi - exit 0 - ;; esac addsec() { diff --git a/arch/powerpc/configs/40x.config b/arch/powerpc/configs/40x.config deleted file mode 100644 index 82a9d58ddb813..0000000000000 --- a/arch/powerpc/configs/40x.config +++ /dev/null @@ -1,2 +0,0 @@ -CONFIG_PPC64=n -CONFIG_40x=y diff --git a/arch/powerpc/configs/40x/acadia_defconfig b/arch/powerpc/configs/40x/acadia_defconfig deleted file mode 100644 index 25eed86ec5287..0000000000000 --- a/arch/powerpc/configs/40x/acadia_defconfig +++ /dev/null @@ -1,61 +0,0 @@ -CONFIG_40x=y -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_EXPERT=y -CONFIG_KALLSYMS_ALL=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ACADIA=y -CONFIG_PCI=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IPV6 is not set -CONFIG_CONNECTOR=y -CONFIG_MTD=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_BLOCK=m -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP_OF=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=35000 -CONFIG_NETDEVICES=y -CONFIG_IBM_EMAC=y -CONFIG_IBM_EMAC_RXB=256 -CONFIG_IBM_EMAC_TXB=256 -CONFIG_IBM_EMAC_DEBUG=y -# CONFIG_INPUT is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_OF_PLATFORM=y -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -CONFIG_THERMAL=y -# CONFIG_USB_SUPPORT is not set -CONFIG_EXT2_FS=y -CONFIG_PROC_KCORE=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_ROOT_NFS=y -CONFIG_DEBUG_FS=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DETECT_HUNG_TASK=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_PCBC=y -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_DES=y diff --git a/arch/powerpc/configs/40x/kilauea_defconfig b/arch/powerpc/configs/40x/kilauea_defconfig deleted file mode 100644 index 3549c9e950e85..0000000000000 --- a/arch/powerpc/configs/40x/kilauea_defconfig +++ /dev/null @@ -1,69 +0,0 @@ -CONFIG_40x=y -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_EXPERT=y -CONFIG_KALLSYMS_ALL=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_KILAUEA=y -CONFIG_PCI=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IPV6 is not set -CONFIG_CONNECTOR=y -CONFIG_MTD=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP_OF=y -CONFIG_MTD_RAW_NAND=y -CONFIG_MTD_NAND_NDFC=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=35000 -CONFIG_NETDEVICES=y -CONFIG_IBM_EMAC=y -CONFIG_IBM_EMAC_RXB=256 -CONFIG_IBM_EMAC_TXB=256 -# CONFIG_INPUT is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_OF_PLATFORM=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_IBM_IIC=y -CONFIG_SENSORS_LM75=y -CONFIG_THERMAL=y -# CONFIG_USB_SUPPORT is not set -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_DS1307=y -CONFIG_EXT2_FS=y -CONFIG_PROC_KCORE=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_ROOT_NFS=y -CONFIG_DEBUG_FS=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DETECT_HUNG_TASK=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_PCBC=y -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_DES=y diff --git a/arch/powerpc/configs/40x/klondike_defconfig b/arch/powerpc/configs/40x/klondike_defconfig deleted file mode 100644 index a974d1e945cc8..0000000000000 --- a/arch/powerpc/configs/40x/klondike_defconfig +++ /dev/null @@ -1,43 +0,0 @@ -CONFIG_40x=y -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_EXPERT=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_APM8018X=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -CONFIG_MATH_EMULATION=y -# CONFIG_SUSPEND is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=35000 -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_SG=y -CONFIG_SCSI_SAS_ATTRS=y -# CONFIG_INPUT is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -# CONFIG_UNIX98_PTYS is not set -# CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_IOMMU_SUPPORT is not set -CONFIG_EXT2_FS=y -CONFIG_EXT4_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_PROC_KCORE=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_UTF8=y -CONFIG_MAGIC_SYSRQ=y -# CONFIG_SCHED_DEBUG is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_FTRACE is not set diff --git a/arch/powerpc/configs/40x/makalu_defconfig b/arch/powerpc/configs/40x/makalu_defconfig deleted file mode 100644 index 4563f88acf0c0..0000000000000 --- a/arch/powerpc/configs/40x/makalu_defconfig +++ /dev/null @@ -1,59 +0,0 @@ -CONFIG_40x=y -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_EXPERT=y -CONFIG_KALLSYMS_ALL=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_MAKALU=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IPV6 is not set -CONFIG_CONNECTOR=y -CONFIG_MTD=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_BLOCK=m -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP_OF=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=35000 -CONFIG_NETDEVICES=y -CONFIG_IBM_EMAC=y -CONFIG_IBM_EMAC_RXB=256 -CONFIG_IBM_EMAC_TXB=256 -# CONFIG_INPUT is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_OF_PLATFORM=y -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -CONFIG_THERMAL=y -# CONFIG_USB_SUPPORT is not set -CONFIG_EXT2_FS=y -CONFIG_PROC_KCORE=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_ROOT_NFS=y -CONFIG_DEBUG_FS=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DETECT_HUNG_TASK=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_PCBC=y -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_DES=y diff --git a/arch/powerpc/configs/40x/obs600_defconfig b/arch/powerpc/configs/40x/obs600_defconfig deleted file mode 100644 index 2a2bb3f468475..0000000000000 --- a/arch/powerpc/configs/40x/obs600_defconfig +++ /dev/null @@ -1,69 +0,0 @@ -CONFIG_40x=y -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_EXPERT=y -CONFIG_KALLSYMS_ALL=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_OBS600=y -CONFIG_MATH_EMULATION=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IPV6 is not set -CONFIG_CONNECTOR=y -CONFIG_MTD=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP_OF=y -CONFIG_MTD_RAW_NAND=y -CONFIG_MTD_NAND_NDFC=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=35000 -CONFIG_NETDEVICES=y -CONFIG_IBM_EMAC=y -CONFIG_IBM_EMAC_RXB=256 -CONFIG_IBM_EMAC_TXB=256 -# CONFIG_INPUT is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_OF_PLATFORM=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_IBM_IIC=y -CONFIG_SENSORS_LM75=y -CONFIG_THERMAL=y -# CONFIG_USB_SUPPORT is not set -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_DS1307=y -CONFIG_EXT2_FS=y -CONFIG_PROC_KCORE=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_ROOT_NFS=y -CONFIG_DEBUG_FS=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DETECT_HUNG_TASK=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_PCBC=y -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_DES=y diff --git a/arch/powerpc/configs/40x/walnut_defconfig b/arch/powerpc/configs/40x/walnut_defconfig deleted file mode 100644 index 9eaaf1a1d2c68..0000000000000 --- a/arch/powerpc/configs/40x/walnut_defconfig +++ /dev/null @@ -1,55 +0,0 @@ -CONFIG_40x=y -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_EXPERT=y -CONFIG_KALLSYMS_ALL=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IPV6 is not set -CONFIG_CONNECTOR=y -CONFIG_MTD=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_BLOCK=m -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP_OF=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=35000 -CONFIG_NETDEVICES=y -CONFIG_IBM_EMAC=y -# CONFIG_INPUT is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_OF_PLATFORM=y -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -CONFIG_THERMAL=y -CONFIG_EXT2_FS=y -CONFIG_PROC_KCORE=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_ROOT_NFS=y -CONFIG_DEBUG_FS=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DETECT_HUNG_TASK=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_PCBC=y -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_DES=y diff --git a/arch/powerpc/configs/85xx-hw.config b/arch/powerpc/configs/85xx-hw.config index 524db76f47b73..8aff832173977 100644 --- a/arch/powerpc/configs/85xx-hw.config +++ b/arch/powerpc/configs/85xx-hw.config @@ -24,6 +24,7 @@ CONFIG_FS_ENET=y CONFIG_FSL_CORENET_CF=y CONFIG_FSL_DMA=y CONFIG_FSL_HV_MANAGER=y +CONFIG_FSL_IFC=y CONFIG_FSL_PQ_MDIO=y CONFIG_FSL_RIO=y CONFIG_FSL_XGMAC_MDIO=y @@ -58,6 +59,7 @@ CONFIG_INPUT_FF_MEMLESS=m CONFIG_MARVELL_PHY=y CONFIG_MDIO_BUS_MUX_GPIO=y CONFIG_MDIO_BUS_MUX_MMIOREG=y +CONFIG_MEMORY=y CONFIG_MMC_SDHCI_OF_ESDHC=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI=y diff --git a/arch/powerpc/configs/ppc40x_defconfig b/arch/powerpc/configs/ppc40x_defconfig deleted file mode 100644 index 7e48693775f4c..0000000000000 --- a/arch/powerpc/configs/ppc40x_defconfig +++ /dev/null @@ -1,74 +0,0 @@ -CONFIG_40x=y -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_EXPERT=y -CONFIG_KALLSYMS_ALL=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_PPC4xx_GPIO=y -CONFIG_ACADIA=y -CONFIG_HOTFOOT=y -CONFIG_KILAUEA=y -CONFIG_MAKALU=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_CONNECTOR=y -CONFIG_MTD=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_BLOCK=m -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP_OF=y -CONFIG_MTD_UBI=m -CONFIG_MTD_UBI_GLUEBI=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=35000 -CONFIG_NETDEVICES=y -CONFIG_IBM_EMAC=y -# CONFIG_INPUT is not set -CONFIG_SERIO=m -# CONFIG_SERIO_I8042 is not set -# CONFIG_SERIO_SERPORT is not set -# CONFIG_VT is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_OF_PLATFORM=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=m -CONFIG_I2C_CHARDEV=m -CONFIG_I2C_GPIO=m -CONFIG_I2C_IBM_IIC=m -# CONFIG_HWMON is not set -CONFIG_THERMAL=y -CONFIG_FB=m -CONFIG_EXT2_FS=y -CONFIG_EXT4_FS=m -CONFIG_VFAT_FS=m -CONFIG_PROC_KCORE=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=m -CONFIG_UBIFS_FS=m -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_ISO8859_1=m -CONFIG_DEBUG_FS=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DETECT_HUNG_TASK=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_PCBC=y -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_DES=y diff --git a/arch/powerpc/include/asm/cacheflush.h b/arch/powerpc/include/asm/cacheflush.h index ef7d2de33b89e..f2656774aaa94 100644 --- a/arch/powerpc/include/asm/cacheflush.h +++ b/arch/powerpc/include/asm/cacheflush.h @@ -121,7 +121,7 @@ static inline void invalidate_dcache_range(unsigned long start, mb(); /* sync */ } -#ifdef CONFIG_4xx +#ifdef CONFIG_44x static inline void flush_instruction_cache(void) { iccci((void *)KERNELBASE); diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h index 07a204d210344..201218faed614 100644 --- a/arch/powerpc/include/asm/cputable.h +++ b/arch/powerpc/include/asm/cputable.h @@ -353,7 +353,6 @@ static inline void cpu_feature_keys_init(void) { } CPU_FTR_COMMON | CPU_FTR_FPU_UNAVAILABLE | CPU_FTR_NOEXECUTE) #define CPU_FTRS_CLASSIC32 (CPU_FTR_COMMON) #define CPU_FTRS_8XX (CPU_FTR_NOEXECUTE) -#define CPU_FTRS_40X (CPU_FTR_NOEXECUTE) #define CPU_FTRS_44X (CPU_FTR_NOEXECUTE) #define CPU_FTRS_440x6 (CPU_FTR_NOEXECUTE | \ CPU_FTR_INDEXED_DCR) @@ -507,9 +506,6 @@ enum { #ifdef CONFIG_PPC_8xx CPU_FTRS_8XX | #endif -#ifdef CONFIG_40x - CPU_FTRS_40X | -#endif #ifdef CONFIG_PPC_47x CPU_FTRS_47X | CPU_FTR_476_DD2 | #elif defined(CONFIG_44x) @@ -582,9 +578,6 @@ enum { #ifdef CONFIG_PPC_8xx CPU_FTRS_8XX & #endif -#ifdef CONFIG_40x - CPU_FTRS_40X & -#endif #ifdef CONFIG_PPC_47x CPU_FTRS_47X & #elif defined(CONFIG_44x) diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h index 317659fdeacf2..569ac1165b069 100644 --- a/arch/powerpc/include/asm/hw_irq.h +++ b/arch/powerpc/include/asm/hw_irq.h @@ -63,7 +63,7 @@ static inline void __hard_irq_enable(void) { - if (IS_ENABLED(CONFIG_BOOKE_OR_40x)) + if (IS_ENABLED(CONFIG_BOOKE)) wrtee(MSR_EE); else if (IS_ENABLED(CONFIG_PPC_8xx)) wrtspr(SPRN_EIE); @@ -75,7 +75,7 @@ static inline void __hard_irq_enable(void) static inline void __hard_irq_disable(void) { - if (IS_ENABLED(CONFIG_BOOKE_OR_40x)) + if (IS_ENABLED(CONFIG_BOOKE)) wrtee(0); else if (IS_ENABLED(CONFIG_PPC_8xx)) wrtspr(SPRN_EID); @@ -87,7 +87,7 @@ static inline void __hard_irq_disable(void) static inline void __hard_EE_RI_disable(void) { - if (IS_ENABLED(CONFIG_BOOKE_OR_40x)) + if (IS_ENABLED(CONFIG_BOOKE)) wrtee(0); else if (IS_ENABLED(CONFIG_PPC_8xx)) wrtspr(SPRN_NRI); @@ -99,7 +99,7 @@ static inline void __hard_EE_RI_disable(void) static inline void __hard_RI_enable(void) { - if (IS_ENABLED(CONFIG_BOOKE_OR_40x)) + if (IS_ENABLED(CONFIG_BOOKE)) return; if (IS_ENABLED(CONFIG_PPC_8xx)) diff --git a/arch/powerpc/include/asm/iommu.h b/arch/powerpc/include/asm/iommu.h index bb252a15cd4c6..04072b5f8962c 100644 --- a/arch/powerpc/include/asm/iommu.h +++ b/arch/powerpc/include/asm/iommu.h @@ -158,6 +158,9 @@ extern int iommu_tce_table_put(struct iommu_table *tbl); extern struct iommu_table *iommu_init_table(struct iommu_table *tbl, int nid, unsigned long res_start, unsigned long res_end); bool iommu_table_in_use(struct iommu_table *tbl); +extern void iommu_table_reserve_pages(struct iommu_table *tbl, + unsigned long res_start, unsigned long res_end); +extern void iommu_table_clear(struct iommu_table *tbl); #define IOMMU_TABLE_GROUP_MAX_TABLES 2 @@ -180,9 +183,9 @@ struct iommu_table_group_ops { long (*unset_window)(struct iommu_table_group *table_group, int num); /* Switch ownership from platform code to external user (e.g. VFIO) */ - long (*take_ownership)(struct iommu_table_group *table_group); + long (*take_ownership)(struct iommu_table_group *table_group, struct device *dev); /* Switch ownership from external user (e.g. VFIO) back to core */ - void (*release_ownership)(struct iommu_table_group *table_group); + void (*release_ownership)(struct iommu_table_group *table_group, struct device *dev); }; struct iommu_table_group_link { @@ -219,8 +222,8 @@ extern long iommu_tce_xchg_no_kill(struct mm_struct *mm, enum dma_data_direction *direction); extern void iommu_tce_kill(struct iommu_table *tbl, unsigned long entry, unsigned long pages); +int dev_has_iommu_table(struct device *dev, void *data); -extern struct iommu_table_group_ops spapr_tce_table_group_ops; #else static inline void iommu_register_group(struct iommu_table_group *table_group, int pci_domain_number, @@ -233,6 +236,11 @@ static inline int iommu_add_device(struct iommu_table_group *table_group, { return 0; } + +static inline int dev_has_iommu_table(struct device *dev, void *data) +{ + return 0; +} #endif /* !CONFIG_IOMMU_API */ u64 dma_iommu_get_required_mask(struct device *dev); diff --git a/arch/powerpc/include/asm/irq.h b/arch/powerpc/include/asm/irq.h index ba1a5974e7143..aa3751960ffd8 100644 --- a/arch/powerpc/include/asm/irq.h +++ b/arch/powerpc/include/asm/irq.h @@ -33,7 +33,7 @@ extern int distribute_irqs; struct pt_regs; -#ifdef CONFIG_BOOKE_OR_40x +#ifdef CONFIG_BOOKE /* * Per-cpu stacks for handling critical, debug and machine check * level interrupts. diff --git a/arch/powerpc/include/asm/kfence.h b/arch/powerpc/include/asm/kfence.h index 424ceef82ae61..fab124ada1c7f 100644 --- a/arch/powerpc/include/asm/kfence.h +++ b/arch/powerpc/include/asm/kfence.h @@ -15,10 +15,19 @@ #define ARCH_FUNC_PREFIX "." #endif +#ifdef CONFIG_KFENCE +extern bool kfence_disabled; + +static inline void disable_kfence(void) +{ + kfence_disabled = true; +} + static inline bool arch_kfence_init_pool(void) { - return true; + return !kfence_disabled; } +#endif #ifdef CONFIG_PPC64 static inline bool kfence_protect_page(unsigned long addr, bool protect) diff --git a/arch/powerpc/include/asm/kup.h b/arch/powerpc/include/asm/kup.h index ad7e8c5aec3f8..2bb03d941e3e8 100644 --- a/arch/powerpc/include/asm/kup.h +++ b/arch/powerpc/include/asm/kup.h @@ -20,7 +20,7 @@ static __always_inline bool kuap_is_disabled(void); #include #endif -#ifdef CONFIG_BOOKE_OR_40x +#ifdef CONFIG_BOOKE #include #endif diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h index 8a27b046c6a2c..009c45044a5a1 100644 --- a/arch/powerpc/include/asm/mmu.h +++ b/arch/powerpc/include/asm/mmu.h @@ -16,7 +16,6 @@ */ #define MMU_FTR_HPTE_TABLE ASM_CONST(0x00000001) #define MMU_FTR_TYPE_8xx ASM_CONST(0x00000002) -#define MMU_FTR_TYPE_40x ASM_CONST(0x00000004) #define MMU_FTR_TYPE_44x ASM_CONST(0x00000008) #define MMU_FTR_TYPE_FSL_E ASM_CONST(0x00000010) #define MMU_FTR_TYPE_47x ASM_CONST(0x00000020) @@ -153,9 +152,6 @@ enum { #ifdef CONFIG_PPC_8xx MMU_FTR_TYPE_8xx | #endif -#ifdef CONFIG_40x - MMU_FTR_TYPE_40x | -#endif #ifdef CONFIG_PPC_47x MMU_FTR_TYPE_47x | MMU_FTR_USE_TLBIVAX_BCAST | MMU_FTR_LOCK_BCAST_INVAL | #elif defined(CONFIG_44x) @@ -202,9 +198,6 @@ enum { #ifdef CONFIG_PPC_8xx #define MMU_FTRS_ALWAYS MMU_FTR_TYPE_8xx #endif -#ifdef CONFIG_40x -#define MMU_FTRS_ALWAYS MMU_FTR_TYPE_40x -#endif #ifdef CONFIG_PPC_47x #define MMU_FTRS_ALWAYS MMU_FTR_TYPE_47x #elif defined(CONFIG_44x) diff --git a/arch/powerpc/include/asm/nohash/32/mmu-40x.h b/arch/powerpc/include/asm/nohash/32/mmu-40x.h deleted file mode 100644 index 8a8f13a22cf4e..0000000000000 --- a/arch/powerpc/include/asm/nohash/32/mmu-40x.h +++ /dev/null @@ -1,68 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _ASM_POWERPC_MMU_40X_H_ -#define _ASM_POWERPC_MMU_40X_H_ - -/* - * PPC40x support - */ - -#define PPC40X_TLB_SIZE 64 - -/* - * TLB entries are defined by a "high" tag portion and a "low" data - * portion. On all architectures, the data portion is 32-bits. - * - * TLB entries are managed entirely under software control by reading, - * writing, and searchoing using the 4xx-specific tlbre, tlbwr, and tlbsx - * instructions. - */ - -#define TLB_LO 1 -#define TLB_HI 0 - -#define TLB_DATA TLB_LO -#define TLB_TAG TLB_HI - -/* Tag portion */ - -#define TLB_EPN_MASK 0xFFFFFC00 /* Effective Page Number */ -#define TLB_PAGESZ_MASK 0x00000380 -#define TLB_PAGESZ(x) (((x) & 0x7) << 7) -#define PAGESZ_1K 0 -#define PAGESZ_4K 1 -#define PAGESZ_16K 2 -#define PAGESZ_64K 3 -#define PAGESZ_256K 4 -#define PAGESZ_1M 5 -#define PAGESZ_4M 6 -#define PAGESZ_16M 7 -#define TLB_VALID 0x00000040 /* Entry is valid */ - -/* Data portion */ - -#define TLB_RPN_MASK 0xFFFFFC00 /* Real Page Number */ -#define TLB_PERM_MASK 0x00000300 -#define TLB_EX 0x00000200 /* Instruction execution allowed */ -#define TLB_WR 0x00000100 /* Writes permitted */ -#define TLB_ZSEL_MASK 0x000000F0 -#define TLB_ZSEL(x) (((x) & 0xF) << 4) -#define TLB_ATTR_MASK 0x0000000F -#define TLB_W 0x00000008 /* Caching is write-through */ -#define TLB_I 0x00000004 /* Caching is inhibited */ -#define TLB_M 0x00000002 /* Memory is coherent */ -#define TLB_G 0x00000001 /* Memory is guarded from prefetch */ - -#ifndef __ASSEMBLY__ - -typedef struct { - unsigned int id; - unsigned int active; - void __user *vdso; -} mm_context_t; - -#endif /* !__ASSEMBLY__ */ - -#define mmu_virtual_psize MMU_PAGE_4K -#define mmu_linear_psize MMU_PAGE_256M - -#endif /* _ASM_POWERPC_MMU_40X_H_ */ diff --git a/arch/powerpc/include/asm/nohash/32/pgtable.h b/arch/powerpc/include/asm/nohash/32/pgtable.h index 9164a9e41b020..9508399dd036f 100644 --- a/arch/powerpc/include/asm/nohash/32/pgtable.h +++ b/arch/powerpc/include/asm/nohash/32/pgtable.h @@ -118,9 +118,7 @@ * (hardware-defined) PowerPC PTE as closely as possible. */ -#if defined(CONFIG_40x) -#include -#elif defined(CONFIG_44x) +#if defined(CONFIG_44x) #include #elif defined(CONFIG_PPC_85xx) && defined(CONFIG_PTE_64BIT) #include diff --git a/arch/powerpc/include/asm/nohash/32/pte-40x.h b/arch/powerpc/include/asm/nohash/32/pte-40x.h deleted file mode 100644 index d759cfd747541..0000000000000 --- a/arch/powerpc/include/asm/nohash/32/pte-40x.h +++ /dev/null @@ -1,73 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _ASM_POWERPC_NOHASH_32_PTE_40x_H -#define _ASM_POWERPC_NOHASH_32_PTE_40x_H -#ifdef __KERNEL__ - -/* - * At present, all PowerPC 400-class processors share a similar TLB - * architecture. The instruction and data sides share a unified, - * 64-entry, fully-associative TLB which is maintained totally under - * software control. In addition, the instruction side has a - * hardware-managed, 4-entry, fully-associative TLB which serves as a - * first level to the shared TLB. These two TLBs are known as the UTLB - * and ITLB, respectively (see "mmu.h" for definitions). - * - * There are several potential gotchas here. The 40x hardware TLBLO - * field looks like this: - * - * 0 1 2 3 4 ... 18 19 20 21 22 23 24 25 26 27 28 29 30 31 - * RPN..................... 0 0 EX WR ZSEL....... W I M G - * - * Where possible we make the Linux PTE bits match up with this - * - * - bits 20 and 21 must be cleared, because we use 4k pages (40x can - * support down to 1k pages), this is done in the TLBMiss exception - * handler. - * - We use only zones 0 (for kernel pages) and 1 (for user pages) - * of the 16 available. Bit 24-26 of the TLB are cleared in the TLB - * miss handler. Bit 27 is PAGE_USER, thus selecting the correct - * zone. - * - PRESENT *must* be in the bottom two bits because swap PTEs - * use the top 30 bits. Because 40x doesn't support SMP anyway, M is - * irrelevant so we borrow it for PAGE_PRESENT. Bit 30 - * is cleared in the TLB miss handler before the TLB entry is loaded. - * - All other bits of the PTE are loaded into TLBLO without - * modification, leaving us only the bits 20, 21, 24, 25, 26, 30 for - * software PTE bits. We actually use bits 21, 24, 25, and - * 30 respectively for the software bits: ACCESSED, DIRTY, RW, and - * PRESENT. - */ - -#define _PAGE_GUARDED 0x001 /* G: page is guarded from prefetch */ -#define _PAGE_PRESENT 0x002 /* software: PTE contains a translation */ -#define _PAGE_NO_CACHE 0x004 /* I: caching is inhibited */ -#define _PAGE_WRITETHRU 0x008 /* W: caching is write-through */ -#define _PAGE_READ 0x010 /* software: read permission */ -#define _PAGE_SPECIAL 0x020 /* software: Special page */ -#define _PAGE_DIRTY 0x080 /* software: dirty page */ -#define _PAGE_WRITE 0x100 /* hardware: WR, anded with dirty in exception */ -#define _PAGE_EXEC 0x200 /* hardware: EX permission */ -#define _PAGE_ACCESSED 0x400 /* software: R: page referenced */ - -/* No page size encoding in the linux PTE */ -#define _PAGE_PSIZE 0 - -/* cache related flags non existing on 40x */ -#define _PAGE_COHERENT 0 - -#define _PMD_PRESENT 0x400 /* PMD points to page of PTEs */ -#define _PMD_PRESENT_MASK _PMD_PRESENT -#define _PMD_BAD 0x802 -#define _PMD_SIZE_4M 0x0c0 -#define _PMD_SIZE_16M 0x0e0 -#define _PMD_USER 0 - -#define _PTE_NONE_MASK 0 - -#define _PAGE_BASE_NC (_PAGE_PRESENT | _PAGE_ACCESSED) -#define _PAGE_BASE (_PAGE_BASE_NC) - -#include - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_NOHASH_32_PTE_40x_H */ diff --git a/arch/powerpc/include/asm/nohash/mmu.h b/arch/powerpc/include/asm/nohash/mmu.h index e264be219fdb8..4cc7950441036 100644 --- a/arch/powerpc/include/asm/nohash/mmu.h +++ b/arch/powerpc/include/asm/nohash/mmu.h @@ -2,10 +2,7 @@ #ifndef _ASM_POWERPC_NOHASH_MMU_H_ #define _ASM_POWERPC_NOHASH_MMU_H_ -#if defined(CONFIG_40x) -/* 40x-style software loaded TLB */ -#include -#elif defined(CONFIG_44x) +#if defined(CONFIG_44x) /* 44x-style software loaded TLB */ #include #elif defined(CONFIG_PPC_E500) diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h index 1d1018c1e4820..02897f4b0dbf8 100644 --- a/arch/powerpc/include/asm/ppc_asm.h +++ b/arch/powerpc/include/asm/ppc_asm.h @@ -482,7 +482,7 @@ END_FTR_SECTION_NESTED(CPU_FTR_CELL_TB_BUG, CPU_FTR_CELL_TB_BUG, 96) * and they must be used. */ -#if !defined(CONFIG_4xx) && !defined(CONFIG_PPC_8xx) +#if !defined(CONFIG_44x) && !defined(CONFIG_PPC_8xx) #define tlbia \ li r4,1024; \ mtctr r4; \ diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index e44cac0da346f..6b94de17201c7 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -159,7 +159,7 @@ struct thread_struct { unsigned long sr0; #endif #endif /* CONFIG_PPC32 */ -#if defined(CONFIG_BOOKE_OR_40x) && defined(CONFIG_PPC_KUAP) +#if defined(CONFIG_BOOKE) && defined(CONFIG_PPC_KUAP) unsigned long pid; /* value written in PID reg. at interrupt exit */ #endif /* Debug Registers */ diff --git a/arch/powerpc/include/asm/ptrace.h b/arch/powerpc/include/asm/ptrace.h index ea8f91fbc62f9..7b9350756875a 100644 --- a/arch/powerpc/include/asm/ptrace.h +++ b/arch/powerpc/include/asm/ptrace.h @@ -310,7 +310,7 @@ static inline void regs_set_return_value(struct pt_regs *regs, unsigned long rc) static inline bool cpu_has_msr_ri(void) { - return !IS_ENABLED(CONFIG_BOOKE_OR_40x); + return !IS_ENABLED(CONFIG_BOOKE); } static inline bool regs_is_unrecoverable(struct pt_regs *regs) diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index eed33cb916d0f..0228c90bbcc7b 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -18,7 +18,7 @@ #include /* Pickup Book E specific registers. */ -#ifdef CONFIG_BOOKE_OR_40x +#ifdef CONFIG_BOOKE #include #endif @@ -233,14 +233,10 @@ /* Special Purpose Registers (SPRNs)*/ -#ifdef CONFIG_40x -#define SPRN_PID 0x3B1 /* Process ID */ -#else #define SPRN_PID 0x030 /* Process ID */ #ifdef CONFIG_BOOKE #define SPRN_PID0 SPRN_PID/* Process ID Register 0 */ #endif -#endif #define SPRN_CTR 0x009 /* Count Register */ #define SPRN_DSCR 0x11 @@ -527,7 +523,7 @@ #define SPRN_TSCR 0x399 /* Thread Switch Control Register */ #define SPRN_DEC 0x016 /* Decrement Register */ -#define SPRN_PIT 0x3DB /* Programmable Interval Timer (40x/BOOKE) */ +#define SPRN_PIT 0x3DB /* Programmable Interval Timer (BOOKE) */ #define SPRN_DER 0x095 /* Debug Enable Register */ #define DER_RSTE 0x40000000 /* Reset Interrupt */ @@ -1116,15 +1112,6 @@ * - SPRG2 indicator that we are in RTAS * - SPRG4 (603 only) pseudo TLB LRU data * - * 32-bit 40x: - * - SPRG0 scratch for exception vectors - * - SPRG1 scratch for exception vectors - * - SPRG2 scratch for exception vectors - * - SPRG4 scratch for exception vectors (not 403) - * - SPRG5 scratch for exception vectors (not 403) - * - SPRG6 scratch for exception vectors (not 403) - * - SPRG7 scratch for exception vectors (not 403) - * * 32-bit 440 and FSL BookE: * - SPRG0 scratch for exception vectors * - SPRG1 scratch for exception vectors (*) @@ -1216,16 +1203,6 @@ #define SPRN_SPRG_603_LRU SPRN_SPRG4 #endif -#ifdef CONFIG_40x -#define SPRN_SPRG_SCRATCH0 SPRN_SPRG0 -#define SPRN_SPRG_SCRATCH1 SPRN_SPRG1 -#define SPRN_SPRG_SCRATCH2 SPRN_SPRG2 -#define SPRN_SPRG_SCRATCH3 SPRN_SPRG4 -#define SPRN_SPRG_SCRATCH4 SPRN_SPRG5 -#define SPRN_SPRG_SCRATCH5 SPRN_SPRG6 -#define SPRN_SPRG_SCRATCH6 SPRN_SPRG7 -#endif - #ifdef CONFIG_BOOKE #define SPRN_SPRG_RSCRATCH0 SPRN_SPRG0 #define SPRN_SPRG_WSCRATCH0 SPRN_SPRG0 diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h index af56980b6cdbe..656bfaf91526e 100644 --- a/arch/powerpc/include/asm/reg_booke.h +++ b/arch/powerpc/include/asm/reg_booke.h @@ -1,10 +1,7 @@ /* SPDX-License-Identifier: GPL-2.0-only */ /* * Contains register definitions common to the Book E PowerPC - * specification. Notice that while the IBM-40x series of CPUs - * are not true Book E PowerPCs, they borrowed a number of features - * before Book E was finalized, and are included here as well. Unfortunately, - * they sometimes used different locations than true Book E CPUs did. + * specification. * * Copyright 2009-2010 Freescale Semiconductor, Inc. */ @@ -42,9 +39,6 @@ #define MSR_KERNEL (MSR_ | MSR_64BIT) #define MSR_USER32 (MSR_ | MSR_PR | MSR_EE) #define MSR_USER64 (MSR_USER32 | MSR_64BIT) -#elif defined (CONFIG_40x) -#define MSR_KERNEL (MSR_ME|MSR_RI|MSR_IR|MSR_DR|MSR_CE) -#define MSR_USER (MSR_KERNEL|MSR_PR|MSR_EE) #else #define MSR_KERNEL (MSR_ME|MSR_RI|MSR_CE) #define MSR_USER (MSR_KERNEL|MSR_PR|MSR_EE) @@ -157,7 +151,6 @@ #define SPRN_TLB3CFG 0x2B3 /* TLB 3 Config Register */ #define SPRN_EPR 0x2BE /* External Proxy Register */ #define SPRN_CCR1 0x378 /* Core Configuration Register 1 */ -#define SPRN_ZPR 0x3B0 /* Zone Protection Register (40x) */ #define SPRN_MAS7 0x3B0 /* MMU Assist Register 7 */ #define SPRN_MMUCR 0x3B2 /* MMU Control Register */ #define SPRN_CCR0 0x3B3 /* Core Configuration Register 0 */ @@ -166,7 +159,6 @@ #define SPRN_SGR 0x3B9 /* Storage Guarded Register */ #define SPRN_DCWR 0x3BA /* Data Cache Write-thru Register */ #define SPRN_SLER 0x3BB /* Little-endian real mode */ -#define SPRN_SU0R 0x3BC /* "User 0" real mode (40x) */ #define SPRN_DCMP 0x3D1 /* Data TLB Compare Register */ #define SPRN_ICDBDR 0x3D3 /* Instruction Cache Debug Data Register */ #define SPRN_EVPR 0x3D6 /* Exception Vector Prefix Register */ @@ -183,10 +175,8 @@ #define SPRN_SVR 0x3FF /* System Version Register */ /* - * SPRs which have conflicting definitions on true Book E versus classic, - * or IBM 40x. + * SPRs which have conflicting definitions on true Book E versus classic. */ -#ifdef CONFIG_BOOKE #define SPRN_CSRR0 0x03A /* Critical Save and Restore Register 0 */ #define SPRN_CSRR1 0x03B /* Critical Save and Restore Register 1 */ #define SPRN_DEAR 0x03D /* Data Error Address Register */ @@ -201,22 +191,6 @@ #define SPRN_DAC2 0x13D /* Data Address Compare 2 */ #define SPRN_TSR 0x150 /* Timer Status Register */ #define SPRN_TCR 0x154 /* Timer Control Register */ -#endif /* Book E */ -#ifdef CONFIG_40x -#define SPRN_DBCR1 0x3BD /* Debug Control Register 1 */ -#define SPRN_ESR 0x3D4 /* Exception Syndrome Register */ -#define SPRN_DEAR 0x3D5 /* Data Error Address Register */ -#define SPRN_TSR 0x3D8 /* Timer Status Register */ -#define SPRN_TCR 0x3DA /* Timer Control Register */ -#define SPRN_SRR2 0x3DE /* Save/Restore Register 2 */ -#define SPRN_SRR3 0x3DF /* Save/Restore Register 3 */ -#define SPRN_DBSR 0x3F0 /* Debug Status Register */ -#define SPRN_DBCR0 0x3F2 /* Debug Control Register 0 */ -#define SPRN_DAC1 0x3F6 /* Data Address Compare 1 */ -#define SPRN_DAC2 0x3F7 /* Data Address Compare 2 */ -#define SPRN_CSRR0 SPRN_SRR2 /* Critical Save and Restore Register 0 */ -#define SPRN_CSRR1 SPRN_SRR3 /* Critical Save and Restore Register 1 */ -#endif #define SPRN_HACOP 0x15F /* Hypervisor Available Coprocessor Register */ /* Bit definitions for CCR1. */ @@ -296,10 +270,6 @@ #endif /* Bit definitions for the DBSR. */ -/* - * DBSR bits which have conflicting definitions on true Book E versus IBM 40x. - */ -#ifdef CONFIG_BOOKE #define DBSR_IDE 0x80000000 /* Imprecise Debug Event */ #define DBSR_MRR 0x30000000 /* Most Recent Reset */ #define DBSR_IC 0x08000000 /* Instruction Completion */ @@ -319,21 +289,6 @@ #define DBSR_CRET 0x00000020 /* Critical Return Debug Event */ #define DBSR_IAC12ATS 0x00000002 /* Instr Address Compare 1/2 Toggle */ #define DBSR_IAC34ATS 0x00000001 /* Instr Address Compare 3/4 Toggle */ -#endif -#ifdef CONFIG_40x -#define DBSR_IC 0x80000000 /* Instruction Completion */ -#define DBSR_BT 0x40000000 /* Branch taken */ -#define DBSR_IRPT 0x20000000 /* Exception Debug Event */ -#define DBSR_TIE 0x10000000 /* Trap Instruction debug Event */ -#define DBSR_IAC1 0x04000000 /* Instruction Address Compare 1 Event */ -#define DBSR_IAC2 0x02000000 /* Instruction Address Compare 2 Event */ -#define DBSR_IAC3 0x00080000 /* Instruction Address Compare 3 Event */ -#define DBSR_IAC4 0x00040000 /* Instruction Address Compare 4 Event */ -#define DBSR_DAC1R 0x01000000 /* Data Address Compare 1 Read Event */ -#define DBSR_DAC1W 0x00800000 /* Data Address Compare 1 Write Event */ -#define DBSR_DAC2R 0x00400000 /* Data Address Compare 2 Read Event */ -#define DBSR_DAC2W 0x00200000 /* Data Address Compare 2 Write Event */ -#endif /* Bit definitions related to the ESR. */ #define ESR_MCI 0x80000000 /* Machine Check - Instruction */ @@ -355,69 +310,6 @@ #define ESR_SPV 0x00000080 /* Signal Processing operation */ /* Bit definitions related to the DBCR0. */ -#if defined(CONFIG_40x) -#define DBCR0_EDM 0x80000000 /* External Debug Mode */ -#define DBCR0_IDM 0x40000000 /* Internal Debug Mode */ -#define DBCR0_RST 0x30000000 /* all the bits in the RST field */ -#define DBCR0_RST_SYSTEM 0x30000000 /* System Reset */ -#define DBCR0_RST_CHIP 0x20000000 /* Chip Reset */ -#define DBCR0_RST_CORE 0x10000000 /* Core Reset */ -#define DBCR0_RST_NONE 0x00000000 /* No Reset */ -#define DBCR0_IC 0x08000000 /* Instruction Completion */ -#define DBCR0_ICMP DBCR0_IC -#define DBCR0_BT 0x04000000 /* Branch Taken */ -#define DBCR0_BRT DBCR0_BT -#define DBCR0_EDE 0x02000000 /* Exception Debug Event */ -#define DBCR0_IRPT DBCR0_EDE -#define DBCR0_TDE 0x01000000 /* TRAP Debug Event */ -#define DBCR0_IA1 0x00800000 /* Instr Addr compare 1 enable */ -#define DBCR0_IAC1 DBCR0_IA1 -#define DBCR0_IA2 0x00400000 /* Instr Addr compare 2 enable */ -#define DBCR0_IAC2 DBCR0_IA2 -#define DBCR0_IA12 0x00200000 /* Instr Addr 1-2 range enable */ -#define DBCR0_IA12X 0x00100000 /* Instr Addr 1-2 range eXclusive */ -#define DBCR0_IA3 0x00080000 /* Instr Addr compare 3 enable */ -#define DBCR0_IAC3 DBCR0_IA3 -#define DBCR0_IA4 0x00040000 /* Instr Addr compare 4 enable */ -#define DBCR0_IAC4 DBCR0_IA4 -#define DBCR0_IA34 0x00020000 /* Instr Addr 3-4 range Enable */ -#define DBCR0_IA34X 0x00010000 /* Instr Addr 3-4 range eXclusive */ -#define DBCR0_IA12T 0x00008000 /* Instr Addr 1-2 range Toggle */ -#define DBCR0_IA34T 0x00004000 /* Instr Addr 3-4 range Toggle */ -#define DBCR0_FT 0x00000001 /* Freeze Timers on debug event */ - -#define dbcr_iac_range(task) ((task)->thread.debug.dbcr0) -#define DBCR_IAC12I DBCR0_IA12 /* Range Inclusive */ -#define DBCR_IAC12X (DBCR0_IA12 | DBCR0_IA12X) /* Range Exclusive */ -#define DBCR_IAC12MODE (DBCR0_IA12 | DBCR0_IA12X) /* IAC 1-2 Mode Bits */ -#define DBCR_IAC34I DBCR0_IA34 /* Range Inclusive */ -#define DBCR_IAC34X (DBCR0_IA34 | DBCR0_IA34X) /* Range Exclusive */ -#define DBCR_IAC34MODE (DBCR0_IA34 | DBCR0_IA34X) /* IAC 3-4 Mode Bits */ - -/* Bit definitions related to the DBCR1. */ -#define DBCR1_DAC1R 0x80000000 /* DAC1 Read Debug Event */ -#define DBCR1_DAC2R 0x40000000 /* DAC2 Read Debug Event */ -#define DBCR1_DAC1W 0x20000000 /* DAC1 Write Debug Event */ -#define DBCR1_DAC2W 0x10000000 /* DAC2 Write Debug Event */ - -#define dbcr_dac(task) ((task)->thread.debug.dbcr1) -#define DBCR_DAC1R DBCR1_DAC1R -#define DBCR_DAC1W DBCR1_DAC1W -#define DBCR_DAC2R DBCR1_DAC2R -#define DBCR_DAC2W DBCR1_DAC2W - -/* - * Are there any active Debug Events represented in the - * Debug Control Registers? - */ -#define DBCR0_ACTIVE_EVENTS (DBCR0_ICMP | DBCR0_IAC1 | DBCR0_IAC2 | \ - DBCR0_IAC3 | DBCR0_IAC4) -#define DBCR1_ACTIVE_EVENTS (DBCR1_DAC1R | DBCR1_DAC2R | \ - DBCR1_DAC1W | DBCR1_DAC2W) -#define DBCR_ACTIVE_EVENTS(dbcr0, dbcr1) (((dbcr0) & DBCR0_ACTIVE_EVENTS) || \ - ((dbcr1) & DBCR1_ACTIVE_EVENTS)) - -#elif defined(CONFIG_BOOKE) #define DBCR0_EDM 0x80000000 /* External Debug Mode */ #define DBCR0_IDM 0x40000000 /* Internal Debug Mode */ #define DBCR0_RST 0x30000000 /* all the bits in the RST field */ @@ -518,7 +410,6 @@ #define DBCR_ACTIVE_EVENTS(dbcr0, dbcr1) (((dbcr0) & DBCR0_ACTIVE_EVENTS) || \ ((dbcr1) & DBCR1_ACTIVE_EVENTS)) -#endif /* #elif defined(CONFIG_BOOKE) */ /* Bit definitions related to the TCR. */ #define TCR_WP(x) (((x)&0x3)<<30) /* WDT Period */ diff --git a/arch/powerpc/include/asm/time.h b/arch/powerpc/include/asm/time.h index 9f50766c4623e..221c8f8ff89bc 100644 --- a/arch/powerpc/include/asm/time.h +++ b/arch/powerpc/include/asm/time.h @@ -58,9 +58,6 @@ static inline u64 get_vtb(void) */ static inline u64 get_dec(void) { - if (IS_ENABLED(CONFIG_40x)) - return mfspr(SPRN_PIT); - return mfspr(SPRN_DEC); } @@ -71,9 +68,7 @@ static inline u64 get_dec(void) */ static inline void set_dec(u64 val) { - if (IS_ENABLED(CONFIG_40x)) - mtspr(SPRN_PIT, (u32)val); - else if (IS_ENABLED(CONFIG_BOOKE)) + if (IS_ENABLED(CONFIG_BOOKE)) mtspr(SPRN_DEC, val); else mtspr(SPRN_DEC, val - 1); diff --git a/arch/powerpc/include/asm/udbg.h b/arch/powerpc/include/asm/udbg.h index b1f094728b359..289023f7a6567 100644 --- a/arch/powerpc/include/asm/udbg.h +++ b/arch/powerpc/include/asm/udbg.h @@ -44,7 +44,6 @@ void __init udbg_init_rtas_panel(void); void __init udbg_init_rtas_console(void); void __init udbg_init_btext(void); void __init udbg_init_44x_as1(void); -void __init udbg_init_40x_realmode(void); void __init udbg_init_cpm(void); void __init udbg_init_usbgecko(void); void __init udbg_init_memcons(void); diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 8585d03c02d3d..1784b6a6ca1dd 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -123,7 +123,6 @@ obj-$(CONFIG_JUMP_LABEL) += jump_label.o obj-$(CONFIG_PPC64) += head_64.o obj-$(CONFIG_PPC_BOOK3S_32) += head_book3s_32.o -obj-$(CONFIG_40x) += head_40x.o obj-$(CONFIG_44x) += head_44x.o obj-$(CONFIG_PPC_8xx) += head_8xx.o obj-$(CONFIG_PPC_85xx) += head_85xx.o diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index f029755f9e69a..23733282de4d9 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -54,7 +54,7 @@ #endif #ifdef CONFIG_PPC32 -#ifdef CONFIG_BOOKE_OR_40x +#ifdef CONFIG_BOOKE #include "head_booke.h" #endif #endif diff --git a/arch/powerpc/kernel/cpu_specs.h b/arch/powerpc/kernel/cpu_specs.h index 85ded3f77204c..5ea14605bb419 100644 --- a/arch/powerpc/kernel/cpu_specs.h +++ b/arch/powerpc/kernel/cpu_specs.h @@ -1,9 +1,5 @@ /* SPDX-License-Identifier: GPL-2.0-or-later */ -#ifdef CONFIG_40x -#include "cpu_specs_40x.h" -#endif - #ifdef CONFIG_PPC_47x #include "cpu_specs_47x.h" #elif defined(CONFIG_44x) diff --git a/arch/powerpc/kernel/cpu_specs_40x.h b/arch/powerpc/kernel/cpu_specs_40x.h deleted file mode 100644 index a1362a75b8c87..0000000000000 --- a/arch/powerpc/kernel/cpu_specs_40x.h +++ /dev/null @@ -1,280 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (C) 2001 Ben. Herrenschmidt (benh@kernel.crashing.org) - */ - -static struct cpu_spec cpu_specs[] __initdata = { - { /* STB 04xxx */ - .pvr_mask = 0xffff0000, - .pvr_value = 0x41810000, - .cpu_name = "STB04xxx", - .cpu_features = CPU_FTRS_40X, - .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU | - PPC_FEATURE_HAS_4xxMAC, - .mmu_features = MMU_FTR_TYPE_40x, - .icache_bsize = 32, - .dcache_bsize = 32, - .machine_check = machine_check_4xx, - .platform = "ppc405", - }, - { /* NP405L */ - .pvr_mask = 0xffff0000, - .pvr_value = 0x41610000, - .cpu_name = "NP405L", - .cpu_features = CPU_FTRS_40X, - .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU | - PPC_FEATURE_HAS_4xxMAC, - .mmu_features = MMU_FTR_TYPE_40x, - .icache_bsize = 32, - .dcache_bsize = 32, - .machine_check = machine_check_4xx, - .platform = "ppc405", - }, - { /* NP4GS3 */ - .pvr_mask = 0xffff0000, - .pvr_value = 0x40B10000, - .cpu_name = "NP4GS3", - .cpu_features = CPU_FTRS_40X, - .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU | - PPC_FEATURE_HAS_4xxMAC, - .mmu_features = MMU_FTR_TYPE_40x, - .icache_bsize = 32, - .dcache_bsize = 32, - .machine_check = machine_check_4xx, - .platform = "ppc405", - }, - { /* NP405H */ - .pvr_mask = 0xffff0000, - .pvr_value = 0x41410000, - .cpu_name = "NP405H", - .cpu_features = CPU_FTRS_40X, - .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU | - PPC_FEATURE_HAS_4xxMAC, - .mmu_features = MMU_FTR_TYPE_40x, - .icache_bsize = 32, - .dcache_bsize = 32, - .machine_check = machine_check_4xx, - .platform = "ppc405", - }, - { /* 405GPr */ - .pvr_mask = 0xffff0000, - .pvr_value = 0x50910000, - .cpu_name = "405GPr", - .cpu_features = CPU_FTRS_40X, - .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU | - PPC_FEATURE_HAS_4xxMAC, - .mmu_features = MMU_FTR_TYPE_40x, - .icache_bsize = 32, - .dcache_bsize = 32, - .machine_check = machine_check_4xx, - .platform = "ppc405", - }, - { /* STBx25xx */ - .pvr_mask = 0xffff0000, - .pvr_value = 0x51510000, - .cpu_name = "STBx25xx", - .cpu_features = CPU_FTRS_40X, - .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU | - PPC_FEATURE_HAS_4xxMAC, - .mmu_features = MMU_FTR_TYPE_40x, - .icache_bsize = 32, - .dcache_bsize = 32, - .machine_check = machine_check_4xx, - .platform = "ppc405", - }, - { /* 405LP */ - .pvr_mask = 0xffff0000, - .pvr_value = 0x41F10000, - .cpu_name = "405LP", - .cpu_features = CPU_FTRS_40X, - .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU, - .mmu_features = MMU_FTR_TYPE_40x, - .icache_bsize = 32, - .dcache_bsize = 32, - .machine_check = machine_check_4xx, - .platform = "ppc405", - }, - { /* 405EP */ - .pvr_mask = 0xffff0000, - .pvr_value = 0x51210000, - .cpu_name = "405EP", - .cpu_features = CPU_FTRS_40X, - .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU | - PPC_FEATURE_HAS_4xxMAC, - .mmu_features = MMU_FTR_TYPE_40x, - .icache_bsize = 32, - .dcache_bsize = 32, - .machine_check = machine_check_4xx, - .platform = "ppc405", - }, - { /* 405EX Rev. A/B with Security */ - .pvr_mask = 0xffff000f, - .pvr_value = 0x12910007, - .cpu_name = "405EX Rev. A/B", - .cpu_features = CPU_FTRS_40X, - .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU | - PPC_FEATURE_HAS_4xxMAC, - .mmu_features = MMU_FTR_TYPE_40x, - .icache_bsize = 32, - .dcache_bsize = 32, - .machine_check = machine_check_4xx, - .platform = "ppc405", - }, - { /* 405EX Rev. C without Security */ - .pvr_mask = 0xffff000f, - .pvr_value = 0x1291000d, - .cpu_name = "405EX Rev. C", - .cpu_features = CPU_FTRS_40X, - .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU | - PPC_FEATURE_HAS_4xxMAC, - .mmu_features = MMU_FTR_TYPE_40x, - .icache_bsize = 32, - .dcache_bsize = 32, - .machine_check = machine_check_4xx, - .platform = "ppc405", - }, - { /* 405EX Rev. C with Security */ - .pvr_mask = 0xffff000f, - .pvr_value = 0x1291000f, - .cpu_name = "405EX Rev. C", - .cpu_features = CPU_FTRS_40X, - .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU | - PPC_FEATURE_HAS_4xxMAC, - .mmu_features = MMU_FTR_TYPE_40x, - .icache_bsize = 32, - .dcache_bsize = 32, - .machine_check = machine_check_4xx, - .platform = "ppc405", - }, - { /* 405EX Rev. D without Security */ - .pvr_mask = 0xffff000f, - .pvr_value = 0x12910003, - .cpu_name = "405EX Rev. D", - .cpu_features = CPU_FTRS_40X, - .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU | - PPC_FEATURE_HAS_4xxMAC, - .mmu_features = MMU_FTR_TYPE_40x, - .icache_bsize = 32, - .dcache_bsize = 32, - .machine_check = machine_check_4xx, - .platform = "ppc405", - }, - { /* 405EX Rev. D with Security */ - .pvr_mask = 0xffff000f, - .pvr_value = 0x12910005, - .cpu_name = "405EX Rev. D", - .cpu_features = CPU_FTRS_40X, - .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU | - PPC_FEATURE_HAS_4xxMAC, - .mmu_features = MMU_FTR_TYPE_40x, - .icache_bsize = 32, - .dcache_bsize = 32, - .machine_check = machine_check_4xx, - .platform = "ppc405", - }, - { /* 405EXr Rev. A/B without Security */ - .pvr_mask = 0xffff000f, - .pvr_value = 0x12910001, - .cpu_name = "405EXr Rev. A/B", - .cpu_features = CPU_FTRS_40X, - .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU | - PPC_FEATURE_HAS_4xxMAC, - .mmu_features = MMU_FTR_TYPE_40x, - .icache_bsize = 32, - .dcache_bsize = 32, - .machine_check = machine_check_4xx, - .platform = "ppc405", - }, - { /* 405EXr Rev. C without Security */ - .pvr_mask = 0xffff000f, - .pvr_value = 0x12910009, - .cpu_name = "405EXr Rev. C", - .cpu_features = CPU_FTRS_40X, - .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU | - PPC_FEATURE_HAS_4xxMAC, - .mmu_features = MMU_FTR_TYPE_40x, - .icache_bsize = 32, - .dcache_bsize = 32, - .machine_check = machine_check_4xx, - .platform = "ppc405", - }, - { /* 405EXr Rev. C with Security */ - .pvr_mask = 0xffff000f, - .pvr_value = 0x1291000b, - .cpu_name = "405EXr Rev. C", - .cpu_features = CPU_FTRS_40X, - .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU | - PPC_FEATURE_HAS_4xxMAC, - .mmu_features = MMU_FTR_TYPE_40x, - .icache_bsize = 32, - .dcache_bsize = 32, - .machine_check = machine_check_4xx, - .platform = "ppc405", - }, - { /* 405EXr Rev. D without Security */ - .pvr_mask = 0xffff000f, - .pvr_value = 0x12910000, - .cpu_name = "405EXr Rev. D", - .cpu_features = CPU_FTRS_40X, - .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU | - PPC_FEATURE_HAS_4xxMAC, - .mmu_features = MMU_FTR_TYPE_40x, - .icache_bsize = 32, - .dcache_bsize = 32, - .machine_check = machine_check_4xx, - .platform = "ppc405", - }, - { /* 405EXr Rev. D with Security */ - .pvr_mask = 0xffff000f, - .pvr_value = 0x12910002, - .cpu_name = "405EXr Rev. D", - .cpu_features = CPU_FTRS_40X, - .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU | - PPC_FEATURE_HAS_4xxMAC, - .mmu_features = MMU_FTR_TYPE_40x, - .icache_bsize = 32, - .dcache_bsize = 32, - .machine_check = machine_check_4xx, - .platform = "ppc405", - }, - { - /* 405EZ */ - .pvr_mask = 0xffff0000, - .pvr_value = 0x41510000, - .cpu_name = "405EZ", - .cpu_features = CPU_FTRS_40X, - .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU | - PPC_FEATURE_HAS_4xxMAC, - .mmu_features = MMU_FTR_TYPE_40x, - .icache_bsize = 32, - .dcache_bsize = 32, - .machine_check = machine_check_4xx, - .platform = "ppc405", - }, - { /* APM8018X */ - .pvr_mask = 0xffff0000, - .pvr_value = 0x7ff11432, - .cpu_name = "APM8018X", - .cpu_features = CPU_FTRS_40X, - .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU | - PPC_FEATURE_HAS_4xxMAC, - .mmu_features = MMU_FTR_TYPE_40x, - .icache_bsize = 32, - .dcache_bsize = 32, - .machine_check = machine_check_4xx, - .platform = "ppc405", - }, - { /* default match */ - .pvr_mask = 0x00000000, - .pvr_value = 0x00000000, - .cpu_name = "(generic 40x PPC)", - .cpu_features = CPU_FTRS_40X, - .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU | - PPC_FEATURE_HAS_4xxMAC, - .mmu_features = MMU_FTR_TYPE_40x, - .icache_bsize = 32, - .dcache_bsize = 32, - .machine_check = machine_check_4xx, - .platform = "ppc405", - } -}; diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c index 6670063a7a6c7..d03f17987fca7 100644 --- a/arch/powerpc/kernel/eeh.c +++ b/arch/powerpc/kernel/eeh.c @@ -1273,22 +1273,6 @@ EXPORT_SYMBOL(eeh_dev_release); #ifdef CONFIG_IOMMU_API -static int dev_has_iommu_table(struct device *dev, void *data) -{ - struct pci_dev *pdev = to_pci_dev(dev); - struct pci_dev **ppdev = data; - - if (!dev) - return 0; - - if (device_iommu_mapped(dev)) { - *ppdev = pdev; - return 1; - } - - return 0; -} - /** * eeh_iommu_group_to_pe - Convert IOMMU group to EEH PE * @group: IOMMU group diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S index 7eda33a24bb45..f4a8c98772491 100644 --- a/arch/powerpc/kernel/entry_32.S +++ b/arch/powerpc/kernel/entry_32.S @@ -108,7 +108,7 @@ transfer_to_syscall: stw r11, 0(r1) mflr r12 stw r12, _LINK(r1) -#ifdef CONFIG_BOOKE_OR_40x +#ifdef CONFIG_BOOKE rlwinm r9,r9,0,14,12 /* clear MSR_WE (necessary?) */ #endif lis r12,STACK_FRAME_REGS_MARKER@ha /* exception frame marker */ @@ -158,9 +158,6 @@ syscall_exit_finish: 1: REST_GPR(2, r1) REST_GPR(1, r1) rfi -#ifdef CONFIG_40x - b . /* Prevent prefetch past rfi */ -#endif 3: mtcr r5 lwz r4,_CTR(r1) @@ -214,7 +211,7 @@ start_kernel_thread: .globl fast_exception_return fast_exception_return: -#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE)) +#ifndef CONFIG_BOOKE andi. r10,r9,MSR_RI /* check for recoverable interrupt */ beq 3f /* if not, we've got problems */ #endif @@ -237,9 +234,6 @@ fast_exception_return: REST_GPR(12, r11) REST_GPR(11, r11) rfi -#ifdef CONFIG_40x - b . /* Prevent prefetch past rfi */ -#endif _ASM_NOKPROBE_SYMBOL(fast_exception_return) /* aargh, a nonrecoverable interrupt, panic */ @@ -296,9 +290,6 @@ ALT_FTR_SECTION_END_IFCLR(CPU_FTR_STCX_CHECKS_ADDRESS) REST_GPR(0, r1) REST_GPR(1, r1) rfi -#ifdef CONFIG_40x - b . /* Prevent prefetch past rfi */ -#endif .Lrestore_nvgprs: REST_NVGPRS(r1) @@ -346,9 +337,6 @@ ALT_FTR_SECTION_END_IFCLR(CPU_FTR_STCX_CHECKS_ADDRESS) REST_GPR(0, r1) REST_GPR(1, r1) rfi -#ifdef CONFIG_40x - b . /* Prevent prefetch past rfi */ -#endif 1: /* * Emulate stack store with update. New r1 value was already calculated @@ -375,12 +363,9 @@ ALT_FTR_SECTION_END_IFCLR(CPU_FTR_STCX_CHECKS_ADDRESS) mfspr r9, SPRN_SPRG_SCRATCH0 #endif rfi -#ifdef CONFIG_40x - b . /* Prevent prefetch past rfi */ -#endif _ASM_NOKPROBE_SYMBOL(interrupt_return) -#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE) +#ifdef CONFIG_BOOKE /* * Returning from a critical interrupt in user mode doesn't need @@ -395,17 +380,6 @@ _ASM_NOKPROBE_SYMBOL(interrupt_return) * time of the critical interrupt. * */ -#ifdef CONFIG_40x -#define PPC_40x_TURN_OFF_MSR_DR \ - /* avoid any possible TLB misses here by turning off MSR.DR, we \ - * assume the instructions here are mapped by a pinned TLB entry */ \ - li r10,MSR_IR; \ - mtmsr r10; \ - isync; \ - tophys(r1, r1); -#else -#define PPC_40x_TURN_OFF_MSR_DR -#endif #define RET_FROM_EXC_LEVEL(exc_lvl_srr0, exc_lvl_srr1, exc_lvl_rfi) \ REST_NVGPRS(r1); \ @@ -423,7 +397,6 @@ _ASM_NOKPROBE_SYMBOL(interrupt_return) mtlr r11; \ lwz r10,_CCR(r1); \ mtcrf 0xff,r10; \ - PPC_40x_TURN_OFF_MSR_DR; \ lwz r9,_DEAR(r1); \ lwz r10,_ESR(r1); \ mtspr SPRN_DEAR,r9; \ @@ -471,20 +444,6 @@ _ASM_NOKPROBE_SYMBOL(interrupt_return) #define RESTORE_MMU_REGS #endif -#ifdef CONFIG_40x - .globl ret_from_crit_exc -ret_from_crit_exc: - lis r9,crit_srr0@ha; - lwz r9,crit_srr0@l(r9); - lis r10,crit_srr1@ha; - lwz r10,crit_srr1@l(r10); - mtspr SPRN_SRR0,r9; - mtspr SPRN_SRR1,r10; - RET_FROM_EXC_LEVEL(SPRN_CSRR0, SPRN_CSRR1, PPC_RFCI) -_ASM_NOKPROBE_SYMBOL(ret_from_crit_exc) -#endif /* CONFIG_40x */ - -#ifdef CONFIG_BOOKE .globl ret_from_crit_exc ret_from_crit_exc: RESTORE_xSRR(SRR0,SRR1); @@ -509,4 +468,3 @@ ret_from_mcheck_exc: RET_FROM_EXC_LEVEL(SPRN_MCSRR0, SPRN_MCSRR1, PPC_RFMCI) _ASM_NOKPROBE_SYMBOL(ret_from_mcheck_exc) #endif /* CONFIG_BOOKE */ -#endif /* !(CONFIG_4xx || CONFIG_BOOKE) */ diff --git a/arch/powerpc/kernel/epapr_hcalls.S b/arch/powerpc/kernel/epapr_hcalls.S index 1a9b5ae8ccb2f..6a414ed5a4119 100644 --- a/arch/powerpc/kernel/epapr_hcalls.S +++ b/arch/powerpc/kernel/epapr_hcalls.S @@ -21,7 +21,7 @@ _GLOBAL(epapr_ev_idle) ori r4, r4,_TLF_NAPPING /* so when we take an exception */ PPC_STL r4, TI_LOCAL_FLAGS(r2) /* it will return to our caller */ -#ifdef CONFIG_BOOKE_OR_40x +#ifdef CONFIG_BOOKE wrteei 1 #else mfmsr r4 diff --git a/arch/powerpc/kernel/head_32.h b/arch/powerpc/kernel/head_32.h index f8e2911478a79..9cba7dbf58ddb 100644 --- a/arch/powerpc/kernel/head_32.h +++ b/arch/powerpc/kernel/head_32.h @@ -21,17 +21,9 @@ mtspr SPRN_SPRG_SCRATCH1,r11 mfspr r10, SPRN_SPRG_THREAD .if \handle_dar_dsisr -#ifdef CONFIG_40x - mfspr r11, SPRN_DEAR -#else mfspr r11, SPRN_DAR -#endif stw r11, DAR(r10) -#ifdef CONFIG_40x - mfspr r11, SPRN_ESR -#else mfspr r11, SPRN_DSISR -#endif stw r11, DSISR(r10) .endif mfspr r11, SPRN_SRR0 @@ -96,9 +88,7 @@ .endif lwz r9, SRR1(r12) lwz r12, SRR0(r12) -#ifdef CONFIG_40x - rlwinm r9,r9,0,14,12 /* clear MSR_WE (necessary?) */ -#elif defined(CONFIG_PPC_8xx) +#ifdef CONFIG_PPC_8xx mtspr SPRN_EID, r2 /* Set MSR_RI */ #else li r10, MSR_KERNEL /* can take exceptions */ diff --git a/arch/powerpc/kernel/head_40x.S b/arch/powerpc/kernel/head_40x.S deleted file mode 100644 index 9fc90410b385c..0000000000000 --- a/arch/powerpc/kernel/head_40x.S +++ /dev/null @@ -1,721 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (c) 1995-1996 Gary Thomas - * Initial PowerPC version. - * Copyright (c) 1996 Cort Dougan - * Rewritten for PReP - * Copyright (c) 1996 Paul Mackerras - * Low-level exception handers, MMU support, and rewrite. - * Copyright (c) 1997 Dan Malek - * PowerPC 8xx modifications. - * Copyright (c) 1998-1999 TiVo, Inc. - * PowerPC 403GCX modifications. - * Copyright (c) 1999 Grant Erickson - * PowerPC 403GCX/405GP modifications. - * Copyright 2000 MontaVista Software Inc. - * PPC405 modifications - * PowerPC 403GCX/405GP modifications. - * Author: MontaVista Software, Inc. - * frank_rowand@mvista.com or source@mvista.com - * debbie_chu@mvista.com - * - * Module name: head_4xx.S - * - * Description: - * Kernel execution entry point code. - */ - -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include - -#include "head_32.h" - -/* As with the other PowerPC ports, it is expected that when code - * execution begins here, the following registers contain valid, yet - * optional, information: - * - * r3 - Board info structure pointer (DRAM, frequency, MAC address, etc.) - * r4 - Starting address of the init RAM disk - * r5 - Ending address of the init RAM disk - * r6 - Start of kernel command line string (e.g. "mem=96m") - * r7 - End of kernel command line string - * - * This is all going to change RSN when we add bi_recs....... -- Dan - */ - __HEAD -_GLOBAL(_stext); -_GLOBAL(_start); - - mr r31,r3 /* save device tree ptr */ - - /* We have to turn on the MMU right away so we get cache modes - * set correctly. - */ - bl initial_mmu - -/* We now have the lower 16 Meg mapped into TLB entries, and the caches - * ready to work. - */ -turn_on_mmu: - lis r0,MSR_KERNEL@h - ori r0,r0,MSR_KERNEL@l - mtspr SPRN_SRR1,r0 - lis r0,start_here@h - ori r0,r0,start_here@l - mtspr SPRN_SRR0,r0 - rfi /* enables MMU */ - b . /* prevent prefetch past rfi */ - -/* - * This area is used for temporarily saving registers during the - * critical exception prolog. - */ - . = 0xc0 -crit_save: -_GLOBAL(crit_r10) - .space 4 -_GLOBAL(crit_r11) - .space 4 -_GLOBAL(crit_srr0) - .space 4 -_GLOBAL(crit_srr1) - .space 4 -_GLOBAL(crit_r1) - .space 4 -_GLOBAL(crit_dear) - .space 4 -_GLOBAL(crit_esr) - .space 4 - -/* - * Exception prolog for critical exceptions. This is a little different - * from the normal exception prolog above since a critical exception - * can potentially occur at any point during normal exception processing. - * Thus we cannot use the same SPRG registers as the normal prolog above. - * Instead we use a couple of words of memory at low physical addresses. - * This is OK since we don't support SMP on these processors. - */ -.macro CRITICAL_EXCEPTION_PROLOG trapno name - stw r10,crit_r10@l(0) /* save two registers to work with */ - stw r11,crit_r11@l(0) - mfspr r10,SPRN_SRR0 - mfspr r11,SPRN_SRR1 - stw r10,crit_srr0@l(0) - stw r11,crit_srr1@l(0) - mfspr r10,SPRN_DEAR - mfspr r11,SPRN_ESR - stw r10,crit_dear@l(0) - stw r11,crit_esr@l(0) - mfcr r10 /* save CR in r10 for now */ - mfspr r11,SPRN_SRR3 /* check whether user or kernel */ - andi. r11,r11,MSR_PR - lis r11,(critirq_ctx-PAGE_OFFSET)@ha - lwz r11,(critirq_ctx-PAGE_OFFSET)@l(r11) - beq 1f - /* COMING FROM USER MODE */ - mfspr r11,SPRN_SPRG_THREAD /* if from user, start at top of */ - lwz r11,TASK_STACK-THREAD(r11) /* this thread's kernel stack */ -1: stw r1,crit_r1@l(0) - addi r1,r11,THREAD_SIZE-INT_FRAME_SIZE /* Alloc an excpt frm */ - LOAD_REG_IMMEDIATE(r11, MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)) /* re-enable MMU */ - mtspr SPRN_SRR1, r11 - lis r11, 1f@h - ori r11, r11, 1f@l - mtspr SPRN_SRR0, r11 - rfi - - .text -1: -\name\()_virt: - lwz r11,crit_r1@l(0) - stw r11,GPR1(r1) - stw r11,0(r1) - mr r11,r1 - stw r10,_CCR(r11) /* save various registers */ - stw r12,GPR12(r11) - stw r9,GPR9(r11) - mflr r10 - stw r10,_LINK(r11) - lis r9,PAGE_OFFSET@ha - lwz r10,crit_r10@l(r9) - lwz r12,crit_r11@l(r9) - stw r10,GPR10(r11) - stw r12,GPR11(r11) - lwz r12,crit_dear@l(r9) - lwz r9,crit_esr@l(r9) - stw r12,_DEAR(r11) /* since they may have had stuff */ - stw r9,_ESR(r11) /* exception was taken */ - mfspr r12,SPRN_SRR2 - mfspr r9,SPRN_SRR3 - rlwinm r9,r9,0,14,12 /* clear MSR_WE (necessary?) */ - COMMON_EXCEPTION_PROLOG_END \trapno + 2 -_ASM_NOKPROBE_SYMBOL(\name\()_virt) -.endm - - /* - * State at this point: - * r9 saved in stack frame, now saved SRR3 & ~MSR_WE - * r10 saved in crit_r10 and in stack frame, trashed - * r11 saved in crit_r11 and in stack frame, - * now phys stack/exception frame pointer - * r12 saved in stack frame, now saved SRR2 - * CR saved in stack frame, CR0.EQ = !SRR3.PR - * LR, DEAR, ESR in stack frame - * r1 saved in stack frame, now virt stack/excframe pointer - * r0, r3-r8 saved in stack frame - */ - -/* - * Exception vectors. - */ -#define CRITICAL_EXCEPTION(n, label, hdlr) \ - START_EXCEPTION(n, label); \ - CRITICAL_EXCEPTION_PROLOG n label; \ - prepare_transfer_to_handler; \ - bl hdlr; \ - b ret_from_crit_exc - -/* - * 0x0100 - Critical Interrupt Exception - */ - CRITICAL_EXCEPTION(0x0100, CriticalInterrupt, unknown_exception) - -/* - * 0x0200 - Machine Check Exception - */ - CRITICAL_EXCEPTION(0x0200, MachineCheck, machine_check_exception) - -/* - * 0x0300 - Data Storage Exception - * This happens for just a few reasons. U0 set (but we don't do that), - * or zone protection fault (user violation, write to protected page). - * The other Data TLB exceptions bail out to this point - * if they can't resolve the lightweight TLB fault. - */ - START_EXCEPTION(0x0300, DataStorage) - EXCEPTION_PROLOG 0x300 DataStorage handle_dar_dsisr=1 - prepare_transfer_to_handler - bl do_page_fault - b interrupt_return - -/* - * 0x0400 - Instruction Storage Exception - * This is caused by a fetch from non-execute or guarded pages. - */ - START_EXCEPTION(0x0400, InstructionAccess) - EXCEPTION_PROLOG 0x400 InstructionAccess - li r5,0 - stw r5, _ESR(r11) /* Zero ESR */ - stw r12, _DEAR(r11) /* SRR0 as DEAR */ - prepare_transfer_to_handler - bl do_page_fault - b interrupt_return - -/* 0x0500 - External Interrupt Exception */ - EXCEPTION(0x0500, HardwareInterrupt, do_IRQ) - -/* 0x0600 - Alignment Exception */ - START_EXCEPTION(0x0600, Alignment) - EXCEPTION_PROLOG 0x600 Alignment handle_dar_dsisr=1 - prepare_transfer_to_handler - bl alignment_exception - REST_NVGPRS(r1) - b interrupt_return - -/* 0x0700 - Program Exception */ - START_EXCEPTION(0x0700, ProgramCheck) - EXCEPTION_PROLOG 0x700 ProgramCheck handle_dar_dsisr=1 - prepare_transfer_to_handler - bl program_check_exception - REST_NVGPRS(r1) - b interrupt_return - - EXCEPTION(0x0800, Trap_08, unknown_exception) - EXCEPTION(0x0900, Trap_09, unknown_exception) - EXCEPTION(0x0A00, Trap_0A, unknown_exception) - EXCEPTION(0x0B00, Trap_0B, unknown_exception) - -/* 0x0C00 - System Call Exception */ - START_EXCEPTION(0x0C00, SystemCall) - SYSCALL_ENTRY 0xc00 -/* Trap_0D is commented out to get more space for system call exception */ - -/* EXCEPTION(0x0D00, Trap_0D, unknown_exception) */ - EXCEPTION(0x0E00, Trap_0E, unknown_exception) - EXCEPTION(0x0F00, Trap_0F, unknown_exception) - -/* 0x1000 - Programmable Interval Timer (PIT) Exception */ - START_EXCEPTION(0x1000, DecrementerTrap) - b Decrementer - -/* 0x1010 - Fixed Interval Timer (FIT) Exception */ - START_EXCEPTION(0x1010, FITExceptionTrap) - b FITException - -/* 0x1020 - Watchdog Timer (WDT) Exception */ - START_EXCEPTION(0x1020, WDTExceptionTrap) - b WDTException - -/* 0x1100 - Data TLB Miss Exception - * As the name implies, translation is not in the MMU, so search the - * page tables and fix it. The only purpose of this function is to - * load TLB entries from the page table if they exist. - */ - START_EXCEPTION(0x1100, DTLBMiss) - mtspr SPRN_SPRG_SCRATCH5, r10 /* Save some working registers */ - mtspr SPRN_SPRG_SCRATCH6, r11 - mtspr SPRN_SPRG_SCRATCH3, r12 - mtspr SPRN_SPRG_SCRATCH4, r9 - mfcr r12 - mfspr r9, SPRN_PID - rlwimi r12, r9, 0, 0xff - mfspr r10, SPRN_DEAR /* Get faulting address */ - - /* If we are faulting a kernel address, we have to use the - * kernel page tables. - */ - lis r11, PAGE_OFFSET@h - cmplw r10, r11 - blt+ 3f - lis r11, swapper_pg_dir@h - ori r11, r11, swapper_pg_dir@l - li r9, 0 - mtspr SPRN_PID, r9 /* TLB will have 0 TID */ - b 4f - - /* Get the PGD for the current thread. - */ -3: - mfspr r11,SPRN_SPRG_THREAD - lwz r11,PGDIR(r11) -#ifdef CONFIG_PPC_KUAP - rlwinm. r9, r9, 0, 0xff - beq 5f /* Kuap fault */ -#endif -4: - tophys(r11, r11) - rlwimi r11, r10, 12, 20, 29 /* Create L1 (pgdir/pmd) address */ - lwz r11, 0(r11) /* Get L1 entry */ - andi. r9, r11, _PMD_PRESENT /* Check if it points to a PTE page */ - beq 2f /* Bail if no table */ - - rlwimi r11, r10, 22, 20, 29 /* Compute PTE address */ - lwz r11, 0(r11) /* Get Linux PTE */ - li r9, _PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_READ - andc. r9, r9, r11 /* Check permission */ - bne 5f - - rlwinm r9, r11, 1, _PAGE_WRITE /* dirty => w */ - and r9, r9, r11 /* hwwrite = dirty & w */ - rlwimi r11, r9, 0, _PAGE_WRITE /* replace w by hwwrite */ - - /* Create TLB tag. This is the faulting address plus a static - * set of bits. These are size, valid, E, U0. - */ - li r9, 0x00c0 - rlwimi r10, r9, 0, 20, 31 - - b finish_tlb_load - -2: /* Check for possible large-page pmd entry */ - rlwinm. r9, r11, 2, 22, 24 - beq 5f - - /* Create TLB tag. This is the faulting address, plus a static - * set of bits (valid, E, U0) plus the size from the PMD. - */ - ori r9, r9, 0x40 - rlwimi r10, r9, 0, 20, 31 - - b finish_tlb_load - -5: - /* The bailout. Restore registers to pre-exception conditions - * and call the heavyweights to help us out. - */ - mtspr SPRN_PID, r12 - mtcrf 0x80, r12 - mfspr r9, SPRN_SPRG_SCRATCH4 - mfspr r12, SPRN_SPRG_SCRATCH3 - mfspr r11, SPRN_SPRG_SCRATCH6 - mfspr r10, SPRN_SPRG_SCRATCH5 - b DataStorage - -/* 0x1200 - Instruction TLB Miss Exception - * Nearly the same as above, except we get our information from different - * registers and bailout to a different point. - */ - START_EXCEPTION(0x1200, ITLBMiss) - mtspr SPRN_SPRG_SCRATCH5, r10 /* Save some working registers */ - mtspr SPRN_SPRG_SCRATCH6, r11 - mtspr SPRN_SPRG_SCRATCH3, r12 - mtspr SPRN_SPRG_SCRATCH4, r9 - mfcr r12 - mfspr r9, SPRN_PID - rlwimi r12, r9, 0, 0xff - mfspr r10, SPRN_SRR0 /* Get faulting address */ - - /* If we are faulting a kernel address, we have to use the - * kernel page tables. - */ - lis r11, PAGE_OFFSET@h - cmplw r10, r11 - blt+ 3f - lis r11, swapper_pg_dir@h - ori r11, r11, swapper_pg_dir@l - li r9, 0 - mtspr SPRN_PID, r9 /* TLB will have 0 TID */ - b 4f - - /* Get the PGD for the current thread. - */ -3: - mfspr r11,SPRN_SPRG_THREAD - lwz r11,PGDIR(r11) -#ifdef CONFIG_PPC_KUAP - rlwinm. r9, r9, 0, 0xff - beq 5f /* Kuap fault */ -#endif -4: - tophys(r11, r11) - rlwimi r11, r10, 12, 20, 29 /* Create L1 (pgdir/pmd) address */ - lwz r11, 0(r11) /* Get L1 entry */ - andi. r9, r11, _PMD_PRESENT /* Check if it points to a PTE page */ - beq 2f /* Bail if no table */ - - rlwimi r11, r10, 22, 20, 29 /* Compute PTE address */ - lwz r11, 0(r11) /* Get Linux PTE */ - li r9, _PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC - andc. r9, r9, r11 /* Check permission */ - bne 5f - - rlwinm r9, r11, 1, _PAGE_WRITE /* dirty => w */ - and r9, r9, r11 /* hwwrite = dirty & w */ - rlwimi r11, r9, 0, _PAGE_WRITE /* replace w by hwwrite */ - - /* Create TLB tag. This is the faulting address plus a static - * set of bits. These are size, valid, E, U0. - */ - li r9, 0x00c0 - rlwimi r10, r9, 0, 20, 31 - - b finish_tlb_load - -2: /* Check for possible large-page pmd entry */ - rlwinm. r9, r11, 2, 22, 24 - beq 5f - - /* Create TLB tag. This is the faulting address, plus a static - * set of bits (valid, E, U0) plus the size from the PMD. - */ - ori r9, r9, 0x40 - rlwimi r10, r9, 0, 20, 31 - - b finish_tlb_load - -5: - /* The bailout. Restore registers to pre-exception conditions - * and call the heavyweights to help us out. - */ - mtspr SPRN_PID, r12 - mtcrf 0x80, r12 - mfspr r9, SPRN_SPRG_SCRATCH4 - mfspr r12, SPRN_SPRG_SCRATCH3 - mfspr r11, SPRN_SPRG_SCRATCH6 - mfspr r10, SPRN_SPRG_SCRATCH5 - b InstructionAccess - - EXCEPTION(0x1300, Trap_13, unknown_exception) - EXCEPTION(0x1400, Trap_14, unknown_exception) - EXCEPTION(0x1500, Trap_15, unknown_exception) - EXCEPTION(0x1600, Trap_16, unknown_exception) - EXCEPTION(0x1700, Trap_17, unknown_exception) - EXCEPTION(0x1800, Trap_18, unknown_exception) - EXCEPTION(0x1900, Trap_19, unknown_exception) - EXCEPTION(0x1A00, Trap_1A, unknown_exception) - EXCEPTION(0x1B00, Trap_1B, unknown_exception) - EXCEPTION(0x1C00, Trap_1C, unknown_exception) - EXCEPTION(0x1D00, Trap_1D, unknown_exception) - EXCEPTION(0x1E00, Trap_1E, unknown_exception) - EXCEPTION(0x1F00, Trap_1F, unknown_exception) - -/* Check for a single step debug exception while in an exception - * handler before state has been saved. This is to catch the case - * where an instruction that we are trying to single step causes - * an exception (eg ITLB/DTLB miss) and thus the first instruction of - * the exception handler generates a single step debug exception. - * - * If we get a debug trap on the first instruction of an exception handler, - * we reset the MSR_DE in the _exception handler's_ MSR (the debug trap is - * a critical exception, so we are using SPRN_CSRR1 to manipulate the MSR). - * The exception handler was handling a non-critical interrupt, so it will - * save (and later restore) the MSR via SPRN_SRR1, which will still have - * the MSR_DE bit set. - */ - /* 0x2000 - Debug Exception */ - START_EXCEPTION(0x2000, DebugTrap) - CRITICAL_EXCEPTION_PROLOG 0x2000 DebugTrap - - /* - * If this is a single step or branch-taken exception in an - * exception entry sequence, it was probably meant to apply to - * the code where the exception occurred (since exception entry - * doesn't turn off DE automatically). We simulate the effect - * of turning off DE on entry to an exception handler by turning - * off DE in the SRR3 value and clearing the debug status. - */ - mfspr r10,SPRN_DBSR /* check single-step/branch taken */ - andis. r10,r10,DBSR_IC@h - beq+ 2f - - andi. r10,r9,MSR_IR|MSR_PR /* check supervisor + MMU off */ - beq 1f /* branch and fix it up */ - - mfspr r10,SPRN_SRR2 /* Faulting instruction address */ - cmplwi r10,0x2100 - bgt+ 2f /* address above exception vectors */ - - /* here it looks like we got an inappropriate debug exception. */ -1: rlwinm r9,r9,0,~MSR_DE /* clear DE in the SRR3 value */ - lis r10,DBSR_IC@h /* clear the IC event */ - mtspr SPRN_DBSR,r10 - /* restore state and get out */ - lwz r10,_CCR(r11) - lwz r0,GPR0(r11) - lwz r1,GPR1(r11) - mtcrf 0x80,r10 - mtspr SPRN_SRR2,r12 - mtspr SPRN_SRR3,r9 - lwz r9,GPR9(r11) - lwz r12,GPR12(r11) - lwz r10,crit_r10@l(0) - lwz r11,crit_r11@l(0) - rfci - b . - - /* continue normal handling for a critical exception... */ -2: mfspr r4,SPRN_DBSR - stw r4,_ESR(r11) /* DebugException takes DBSR in _ESR */ - prepare_transfer_to_handler - bl DebugException - b ret_from_crit_exc - - /* Programmable Interval Timer (PIT) Exception. (from 0x1000) */ - __HEAD -Decrementer: - EXCEPTION_PROLOG 0x1000 Decrementer - lis r0,TSR_PIS@h - mtspr SPRN_TSR,r0 /* Clear the PIT exception */ - prepare_transfer_to_handler - bl timer_interrupt - b interrupt_return - - /* Fixed Interval Timer (FIT) Exception. (from 0x1010) */ - __HEAD -FITException: - EXCEPTION_PROLOG 0x1010 FITException - prepare_transfer_to_handler - bl unknown_exception - b interrupt_return - - /* Watchdog Timer (WDT) Exception. (from 0x1020) */ - __HEAD -WDTException: - CRITICAL_EXCEPTION_PROLOG 0x1020 WDTException - prepare_transfer_to_handler - bl WatchdogException - b ret_from_crit_exc - -/* Other PowerPC processors, namely those derived from the 6xx-series - * have vectors from 0x2100 through 0x2F00 defined, but marked as reserved. - * However, for the 4xx-series processors these are neither defined nor - * reserved. - */ - - __HEAD - /* Damn, I came up one instruction too many to fit into the - * exception space :-). Both the instruction and data TLB - * miss get to this point to load the TLB. - * r10 - TLB_TAG value - * r11 - Linux PTE - * r9 - available to use - * PID - loaded with proper value when we get here - * Upon exit, we reload everything and RFI. - * Actually, it will fit now, but oh well.....a common place - * to load the TLB. - */ -tlb_4xx_index: - .long 0 -finish_tlb_load: - /* - * Clear out the software-only bits in the PTE to generate the - * TLB_DATA value. These are the bottom 2 bits of the RPM, the - * 4 bits of the zone field, and M. - */ - li r9, 0x0cf2 - andc r11, r11, r9 - rlwimi r11, r10, 8, 24, 27 /* Copy 4 upper address bit into zone */ - - /* load the next available TLB index. */ - lwz r9, tlb_4xx_index@l(0) - addi r9, r9, 1 - andi. r9, r9, PPC40X_TLB_SIZE - 1 - stw r9, tlb_4xx_index@l(0) - - tlbwe r11, r9, TLB_DATA /* Load TLB LO */ - tlbwe r10, r9, TLB_TAG /* Load TLB HI */ - - /* Done...restore registers and get out of here. - */ - mtspr SPRN_PID, r12 - mtcrf 0x80, r12 - mfspr r9, SPRN_SPRG_SCRATCH4 - mfspr r12, SPRN_SPRG_SCRATCH3 - mfspr r11, SPRN_SPRG_SCRATCH6 - mfspr r10, SPRN_SPRG_SCRATCH5 - rfi /* Should sync shadow TLBs */ - b . /* prevent prefetch past rfi */ - -/* This is where the main kernel code starts. - */ -start_here: - - /* ptr to current */ - lis r2,init_task@h - ori r2,r2,init_task@l - - /* ptr to phys current thread */ - tophys(r4,r2) - addi r4,r4,THREAD /* init task's THREAD */ - mtspr SPRN_SPRG_THREAD,r4 - - /* stack */ - lis r1,init_thread_union@ha - addi r1,r1,init_thread_union@l - li r0,0 - stwu r0,THREAD_SIZE-STACK_FRAME_MIN_SIZE(r1) - - bl early_init /* We have to do this with MMU on */ - -/* - * Decide what sort of machine this is and initialize the MMU. - */ -#ifdef CONFIG_KASAN - bl kasan_early_init -#endif - li r3,0 - mr r4,r31 - bl machine_init - bl MMU_init - -/* Go back to running unmapped so we can load up new values - * and change to using our exception vectors. - * On the 4xx, all we have to do is invalidate the TLB to clear - * the old 16M byte TLB mappings. - */ - lis r4,2f@h - ori r4,r4,2f@l - tophys(r4,r4) - lis r3,(MSR_KERNEL & ~(MSR_IR|MSR_DR))@h - ori r3,r3,(MSR_KERNEL & ~(MSR_IR|MSR_DR))@l - mtspr SPRN_SRR0,r4 - mtspr SPRN_SRR1,r3 - rfi - b . /* prevent prefetch past rfi */ - -/* Load up the kernel context */ -2: - sync /* Flush to memory before changing TLB */ - tlbia - isync /* Flush shadow TLBs */ - - /* set up the PTE pointers for the Abatron bdiGDB. - */ - lis r6, swapper_pg_dir@h - ori r6, r6, swapper_pg_dir@l - lis r5, abatron_pteptrs@h - ori r5, r5, abatron_pteptrs@l - stw r5, 0xf0(0) /* Must match your Abatron config file */ - tophys(r5,r5) - stw r6, 0(r5) - -/* Now turn on the MMU for real! */ - lis r4,MSR_KERNEL@h - ori r4,r4,MSR_KERNEL@l - lis r3,start_kernel@h - ori r3,r3,start_kernel@l - mtspr SPRN_SRR0,r3 - mtspr SPRN_SRR1,r4 - rfi /* enable MMU and jump to start_kernel */ - b . /* prevent prefetch past rfi */ - -/* Set up the initial MMU state so we can do the first level of - * kernel initialization. This maps the first 32 MBytes of memory 1:1 - * virtual to physical and more importantly sets the cache mode. - */ -SYM_FUNC_START_LOCAL(initial_mmu) - tlbia /* Invalidate all TLB entries */ - isync - - /* We should still be executing code at physical address 0x0000xxxx - * at this point. However, start_here is at virtual address - * 0xC000xxxx. So, set up a TLB mapping to cover this once - * translation is enabled. - */ - - lis r3,KERNELBASE@h /* Load the kernel virtual address */ - ori r3,r3,KERNELBASE@l - tophys(r4,r3) /* Load the kernel physical address */ - - iccci r0,r3 /* Invalidate the i-cache before use */ - - /* Load the kernel PID. - */ - li r0,0 - mtspr SPRN_PID,r0 - sync - - /* Configure and load one entry into TLB slots 63 */ - clrrwi r4,r4,10 /* Mask off the real page number */ - ori r4,r4,(TLB_WR | TLB_EX) /* Set the write and execute bits */ - - clrrwi r3,r3,10 /* Mask off the effective page number */ - ori r3,r3,(TLB_VALID | TLB_PAGESZ(PAGESZ_16M)) - - li r0,63 /* TLB slot 63 */ - - tlbwe r4,r0,TLB_DATA /* Load the data portion of the entry */ - tlbwe r3,r0,TLB_TAG /* Load the tag portion of the entry */ - - li r0,62 /* TLB slot 62 */ - addis r4,r4,SZ_16M@h - addis r3,r3,SZ_16M@h - tlbwe r4,r0,TLB_DATA /* Load the data portion of the entry */ - tlbwe r3,r0,TLB_TAG /* Load the tag portion of the entry */ - - isync - - /* Establish the exception vector base - */ - lis r4,KERNELBASE@h /* EVPR only uses the high 16-bits */ - tophys(r0,r4) /* Use the physical address */ - mtspr SPRN_EVPR,r0 - - blr -SYM_FUNC_END(initial_mmu) - -_GLOBAL(abort) - mfspr r13,SPRN_DBCR0 - oris r13,r13,DBCR0_RST_SYSTEM@h - mtspr SPRN_DBCR0,r13 diff --git a/arch/powerpc/kernel/head_booke.h b/arch/powerpc/kernel/head_booke.h index b6b5b01a173cb..0b5c1993809eb 100644 --- a/arch/powerpc/kernel/head_booke.h +++ b/arch/powerpc/kernel/head_booke.h @@ -145,10 +145,9 @@ ALT_FTR_SECTION_END_IFSET(CPU_FTR_EMB_HV) b transfer_to_syscall /* jump to handler */ .endm -/* To handle the additional exception priority levels on 40x and Book-E +/* To handle the additional exception priority levels on Book-E * processors we allocate a stack per additional priority level. * - * On 40x critical is the only additional level * On 44x/e500 we have critical and machine check * * Additionally we reserve a SPRG for each priority level so we can free up a diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c index b70b4f93561fc..76381e14e800c 100644 --- a/arch/powerpc/kernel/iommu.c +++ b/arch/powerpc/kernel/iommu.c @@ -643,7 +643,7 @@ void ppc_iommu_unmap_sg(struct iommu_table *tbl, struct scatterlist *sglist, tbl->it_ops->flush(tbl); } -static void iommu_table_clear(struct iommu_table *tbl) +void iommu_table_clear(struct iommu_table *tbl) { /* * In case of firmware assisted dump system goes through clean @@ -684,7 +684,7 @@ static void iommu_table_clear(struct iommu_table *tbl) #endif } -static void iommu_table_reserve_pages(struct iommu_table *tbl, +void iommu_table_reserve_pages(struct iommu_table *tbl, unsigned long res_start, unsigned long res_end) { int i; @@ -988,6 +988,23 @@ unsigned long iommu_direction_to_tce_perm(enum dma_data_direction dir) EXPORT_SYMBOL_GPL(iommu_direction_to_tce_perm); #ifdef CONFIG_IOMMU_API + +int dev_has_iommu_table(struct device *dev, void *data) +{ + struct pci_dev *pdev = to_pci_dev(dev); + struct pci_dev **ppdev = data; + + if (!dev) + return 0; + + if (device_iommu_mapped(dev)) { + *ppdev = pdev; + return 1; + } + + return 0; +} + /* * SPAPR TCE API */ @@ -1102,59 +1119,6 @@ void iommu_tce_kill(struct iommu_table *tbl, } EXPORT_SYMBOL_GPL(iommu_tce_kill); -#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) -static int iommu_take_ownership(struct iommu_table *tbl) -{ - unsigned long flags, i, sz = (tbl->it_size + 7) >> 3; - int ret = 0; - - /* - * VFIO does not control TCE entries allocation and the guest - * can write new TCEs on top of existing ones so iommu_tce_build() - * must be able to release old pages. This functionality - * requires exchange() callback defined so if it is not - * implemented, we disallow taking ownership over the table. - */ - if (!tbl->it_ops->xchg_no_kill) - return -EINVAL; - - spin_lock_irqsave(&tbl->large_pool.lock, flags); - for (i = 0; i < tbl->nr_pools; i++) - spin_lock_nest_lock(&tbl->pools[i].lock, &tbl->large_pool.lock); - - if (iommu_table_in_use(tbl)) { - pr_err("iommu_tce: it_map is not empty"); - ret = -EBUSY; - } else { - memset(tbl->it_map, 0xff, sz); - } - - for (i = 0; i < tbl->nr_pools; i++) - spin_unlock(&tbl->pools[i].lock); - spin_unlock_irqrestore(&tbl->large_pool.lock, flags); - - return ret; -} - -static void iommu_release_ownership(struct iommu_table *tbl) -{ - unsigned long flags, i, sz = (tbl->it_size + 7) >> 3; - - spin_lock_irqsave(&tbl->large_pool.lock, flags); - for (i = 0; i < tbl->nr_pools; i++) - spin_lock_nest_lock(&tbl->pools[i].lock, &tbl->large_pool.lock); - - memset(tbl->it_map, 0, sz); - - iommu_table_reserve_pages(tbl, tbl->it_reserved_start, - tbl->it_reserved_end); - - for (i = 0; i < tbl->nr_pools; i++) - spin_unlock(&tbl->pools[i].lock); - spin_unlock_irqrestore(&tbl->large_pool.lock, flags); -} -#endif - int iommu_add_device(struct iommu_table_group *table_group, struct device *dev) { /* @@ -1186,98 +1150,6 @@ int iommu_add_device(struct iommu_table_group *table_group, struct device *dev) EXPORT_SYMBOL_GPL(iommu_add_device); #if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) -/* - * A simple iommu_table_group_ops which only allows reusing the existing - * iommu_table. This handles VFIO for POWER7 or the nested KVM. - * The ops does not allow creating windows and only allows reusing the existing - * one if it matches table_group->tce32_start/tce32_size/page_shift. - */ -static unsigned long spapr_tce_get_table_size(__u32 page_shift, - __u64 window_size, __u32 levels) -{ - unsigned long size; - - if (levels > 1) - return ~0U; - size = window_size >> (page_shift - 3); - return size; -} - -static long spapr_tce_create_table(struct iommu_table_group *table_group, int num, - __u32 page_shift, __u64 window_size, __u32 levels, - struct iommu_table **ptbl) -{ - struct iommu_table *tbl = table_group->tables[0]; - - if (num > 0) - return -EPERM; - - if (tbl->it_page_shift != page_shift || - tbl->it_size != (window_size >> page_shift) || - tbl->it_indirect_levels != levels - 1) - return -EINVAL; - - *ptbl = iommu_tce_table_get(tbl); - return 0; -} - -static long spapr_tce_set_window(struct iommu_table_group *table_group, - int num, struct iommu_table *tbl) -{ - return tbl == table_group->tables[num] ? 0 : -EPERM; -} - -static long spapr_tce_unset_window(struct iommu_table_group *table_group, int num) -{ - return 0; -} - -static long spapr_tce_take_ownership(struct iommu_table_group *table_group) -{ - int i, j, rc = 0; - - for (i = 0; i < IOMMU_TABLE_GROUP_MAX_TABLES; ++i) { - struct iommu_table *tbl = table_group->tables[i]; - - if (!tbl || !tbl->it_map) - continue; - - rc = iommu_take_ownership(tbl); - if (!rc) - continue; - - for (j = 0; j < i; ++j) - iommu_release_ownership(table_group->tables[j]); - return rc; - } - return 0; -} - -static void spapr_tce_release_ownership(struct iommu_table_group *table_group) -{ - int i; - - for (i = 0; i < IOMMU_TABLE_GROUP_MAX_TABLES; ++i) { - struct iommu_table *tbl = table_group->tables[i]; - - if (!tbl) - continue; - - iommu_table_clear(tbl); - if (tbl->it_map) - iommu_release_ownership(tbl); - } -} - -struct iommu_table_group_ops spapr_tce_table_group_ops = { - .get_table_size = spapr_tce_get_table_size, - .create_table = spapr_tce_create_table, - .set_window = spapr_tce_set_window, - .unset_window = spapr_tce_unset_window, - .take_ownership = spapr_tce_take_ownership, - .release_ownership = spapr_tce_release_ownership, -}; - /* * A simple iommu_ops to allow less cruft in generic VFIO code. */ @@ -1299,7 +1171,7 @@ spapr_tce_platform_iommu_attach_dev(struct iommu_domain *platform_domain, * The domain being set to PLATFORM from earlier * BLOCKED. The table_group ownership has to be released. */ - table_group->ops->release_ownership(table_group); + table_group->ops->release_ownership(table_group, dev); iommu_group_put(grp); return 0; @@ -1327,7 +1199,7 @@ spapr_tce_blocked_iommu_attach_dev(struct iommu_domain *platform_domain, * also sets the dma_api ops */ table_group = iommu_group_get_iommudata(grp); - ret = table_group->ops->take_ownership(table_group); + ret = table_group->ops->take_ownership(table_group, dev); iommu_group_put(grp); return ret; diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 7504ceec5c58c..2e1600a8bbbbf 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -333,7 +333,7 @@ void __init init_IRQ(void) static_call_update(ppc_get_irq, ppc_md.get_irq); } -#ifdef CONFIG_BOOKE_OR_40x +#ifdef CONFIG_BOOKE void *critirq_ctx[NR_CPUS] __read_mostly; void *dbgirq_ctx[NR_CPUS] __read_mostly; void *mcheckirq_ctx[NR_CPUS] __read_mostly; diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c index ebe4d1645ca1f..7a8bc03a00af0 100644 --- a/arch/powerpc/kernel/kgdb.c +++ b/arch/powerpc/kernel/kgdb.c @@ -45,7 +45,7 @@ static struct hard_trap_info { 0x0800, 0x08 /* SIGFPE */ }, /* fp unavailable */ { 0x0900, 0x0e /* SIGALRM */ }, /* decrementer */ { 0x0c00, 0x14 /* SIGCHLD */ }, /* system call */ -#ifdef CONFIG_BOOKE_OR_40x +#ifdef CONFIG_BOOKE { 0x2002, 0x05 /* SIGTRAP */ }, /* debug */ #if defined(CONFIG_PPC_85xx) { 0x2010, 0x08 /* SIGFPE */ }, /* spe unavailable */ @@ -64,7 +64,7 @@ static struct hard_trap_info { 0x2010, 0x08 /* SIGFPE */ }, /* fp unavailable */ { 0x2020, 0x08 /* SIGFPE */ }, /* ap unavailable */ #endif -#else /* !CONFIG_BOOKE_OR_40x */ +#else /* !CONFIG_BOOKE */ { 0x0d00, 0x05 /* SIGTRAP */ }, /* single-step */ #if defined(CONFIG_PPC_8xx) { 0x1000, 0x04 /* SIGILL */ }, /* software emulation */ diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S index 2eabb15687a64..033cd00aa0fc9 100644 --- a/arch/powerpc/kernel/misc_32.S +++ b/arch/powerpc/kernel/misc_32.S @@ -176,46 +176,6 @@ _GLOBAL(low_choose_7447a_dfs) #endif /* CONFIG_CPU_FREQ_PMAC && CONFIG_PPC_BOOK3S_32 */ -#ifdef CONFIG_40x - -/* - * Do an IO access in real mode - */ -_GLOBAL(real_readb) - mfmsr r7 - rlwinm r0,r7,0,~MSR_DR - sync - mtmsr r0 - sync - isync - lbz r3,0(r3) - sync - mtmsr r7 - sync - isync - blr -_ASM_NOKPROBE_SYMBOL(real_readb) - - /* - * Do an IO access in real mode - */ -_GLOBAL(real_writeb) - mfmsr r7 - rlwinm r0,r7,0,~MSR_DR - sync - mtmsr r0 - sync - isync - stb r3,0(r4) - sync - mtmsr r7 - sync - isync - blr -_ASM_NOKPROBE_SYMBOL(real_writeb) - -#endif /* CONFIG_40x */ - /* * Copy a whole page. We use the dcbz instruction on the destination * to reduce memory traffic (it eliminates the unnecessary reads of diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index a7671786764b6..3b506d4c55f37 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -1573,7 +1573,7 @@ static void __show_regs(struct pt_regs *regs) if (trap == INTERRUPT_MACHINE_CHECK || trap == INTERRUPT_DATA_STORAGE || trap == INTERRUPT_ALIGNMENT) { - if (IS_ENABLED(CONFIG_4xx) || IS_ENABLED(CONFIG_BOOKE)) + if (IS_ENABLED(CONFIG_BOOKE)) pr_cont("DEAR: "REG" ESR: "REG" ", regs->dear, regs->esr); else pr_cont("DAR: "REG" DSISR: %08lx ", regs->dar, regs->dsisr); @@ -1875,7 +1875,7 @@ int copy_thread(struct task_struct *p, const struct kernel_clone_args *args) #if defined(CONFIG_PPC_BOOK3S_32) && defined(CONFIG_PPC_KUAP) p->thread.kuap = KUAP_NONE; #endif -#if defined(CONFIG_BOOKE_OR_40x) && defined(CONFIG_PPC_KUAP) +#if defined(CONFIG_BOOKE) && defined(CONFIG_PPC_KUAP) p->thread.pid = MMU_NO_CONTEXT; #endif diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 60819751e55e6..0be07ed407c70 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -331,6 +331,7 @@ static int __init early_init_dt_scan_cpus(unsigned long node, void *data) { const char *type = of_get_flat_dt_prop(node, "device_type", NULL); + const __be32 *cpu_version = NULL; const __be32 *prop; const __be32 *intserv; int i, nthreads; @@ -420,7 +421,7 @@ static int __init early_init_dt_scan_cpus(unsigned long node, prop = of_get_flat_dt_prop(node, "cpu-version", NULL); if (prop && (be32_to_cpup(prop) & 0xff000000) == 0x0f000000) { identify_cpu(0, be32_to_cpup(prop)); - seq_buf_printf(&ppc_hw_desc, "0x%04x ", be32_to_cpup(prop)); + cpu_version = prop; } check_cpu_feature_properties(node); @@ -431,6 +432,12 @@ static int __init early_init_dt_scan_cpus(unsigned long node, } identical_pvr_fixup(node); + + // We can now add the CPU name & PVR to the hardware description + seq_buf_printf(&ppc_hw_desc, "%s 0x%04lx ", cur_cpu_spec->cpu_name, mfspr(SPRN_PVR)); + if (cpu_version) + seq_buf_printf(&ppc_hw_desc, "0x%04x ", be32_to_cpup(cpu_version)); + init_mmu_slb_size(node); #ifdef CONFIG_PPC64 @@ -881,9 +888,6 @@ void __init early_init_devtree(void *params) dt_cpu_ftrs_scan(); - // We can now add the CPU name & PVR to the hardware description - seq_buf_printf(&ppc_hw_desc, "%s 0x%04lx ", cur_cpu_spec->cpu_name, mfspr(SPRN_PVR)); - /* Retrieve CPU related informations from the flat tree * (altivec support, boot CPU ID, ...) */ diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c index 8064d9c3de862..f7e86e09c49fa 100644 --- a/arch/powerpc/kernel/rtas.c +++ b/arch/powerpc/kernel/rtas.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include #include @@ -1916,6 +1917,9 @@ SYSCALL_DEFINE1(rtas, struct rtas_args __user *, uargs) || nargs + nret > ARRAY_SIZE(args.args)) return -EINVAL; + nargs = array_index_nospec(nargs, ARRAY_SIZE(args.args)); + nret = array_index_nospec(nret, ARRAY_SIZE(args.args) - nargs); + /* Copy in args. */ if (copy_from_user(args.args, uargs->args, nargs * sizeof(rtas_arg_t)) != 0) diff --git a/arch/powerpc/kernel/rtas_flash.c b/arch/powerpc/kernel/rtas_flash.c index 359577ec16801..5407024881e5f 100644 --- a/arch/powerpc/kernel/rtas_flash.c +++ b/arch/powerpc/kernel/rtas_flash.c @@ -773,4 +773,5 @@ static void __exit rtas_flash_cleanup(void) module_init(rtas_flash_init); module_exit(rtas_flash_cleanup); +MODULE_DESCRIPTION("PPC procfs firmware flash interface"); MODULE_LICENSE("GPL"); diff --git a/arch/powerpc/kernel/setup.h b/arch/powerpc/kernel/setup.h index 7912bb50a7cb8..385a00a2e2ca9 100644 --- a/arch/powerpc/kernel/setup.h +++ b/arch/powerpc/kernel/setup.h @@ -29,7 +29,7 @@ void setup_tlb_core_data(void); static inline void setup_tlb_core_data(void) { } #endif -#ifdef CONFIG_BOOKE_OR_40x +#ifdef CONFIG_BOOKE void exc_lvl_early_init(void); #else static inline void exc_lvl_early_init(void) { } diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index b761cc1a403c3..e515c1f7d8d33 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -176,7 +176,7 @@ void __init emergency_stack_init(void) } #endif -#ifdef CONFIG_BOOKE_OR_40x +#ifdef CONFIG_BOOKE void __init exc_lvl_early_init(void) { unsigned int i, hw_cpu; diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index c0fdc6d94feee..0ff9f038e800d 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -695,7 +695,7 @@ static int __init get_freq(char *name, int cells, unsigned long *val) static void start_cpu_decrementer(void) { -#ifdef CONFIG_BOOKE_OR_40x +#ifdef CONFIG_BOOKE unsigned int tcr; /* Clear any pending timer interrupts */ diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index f23430adb68ad..28d6472c380a8 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -2244,7 +2244,7 @@ void __noreturn unrecoverable_exception(struct pt_regs *regs) ; } -#if defined(CONFIG_BOOKE_WDT) || defined(CONFIG_40x) +#ifdef CONFIG_BOOKE_WDT DEFINE_INTERRUPT_HANDLER_NMI(WatchdogException) { printk (KERN_EMERG "PowerPC Book-E Watchdog Exception\n"); diff --git a/arch/powerpc/kernel/udbg.c b/arch/powerpc/kernel/udbg.c index 92b3fc258d110..4b99208f5adcd 100644 --- a/arch/powerpc/kernel/udbg.c +++ b/arch/powerpc/kernel/udbg.c @@ -49,9 +49,6 @@ void __init udbg_early_init(void) #elif defined(CONFIG_PPC_EARLY_DEBUG_44x) /* PPC44x debug */ udbg_init_44x_as1(); -#elif defined(CONFIG_PPC_EARLY_DEBUG_40x) - /* PPC40x debug */ - udbg_init_40x_realmode(); #elif defined(CONFIG_PPC_EARLY_DEBUG_CPM) udbg_init_cpm(); #elif defined(CONFIG_PPC_EARLY_DEBUG_USBGECKO) diff --git a/arch/powerpc/kernel/udbg_16550.c b/arch/powerpc/kernel/udbg_16550.c index a0467e528b700..313802aff5713 100644 --- a/arch/powerpc/kernel/udbg_16550.c +++ b/arch/powerpc/kernel/udbg_16550.c @@ -274,29 +274,6 @@ void __init udbg_init_44x_as1(void) #endif /* CONFIG_PPC_EARLY_DEBUG_44x */ -#ifdef CONFIG_PPC_EARLY_DEBUG_40x - -static u8 udbg_uart_in_40x(unsigned int reg) -{ - return real_readb((void __iomem *)CONFIG_PPC_EARLY_DEBUG_40x_PHYSADDR - + reg); -} - -static void udbg_uart_out_40x(unsigned int reg, u8 val) -{ - real_writeb(val, (void __iomem *)CONFIG_PPC_EARLY_DEBUG_40x_PHYSADDR - + reg); -} - -void __init udbg_init_40x_realmode(void) -{ - udbg_uart_in = udbg_uart_in_40x; - udbg_uart_out = udbg_uart_out_40x; - udbg_use_uart(); -} - -#endif /* CONFIG_PPC_EARLY_DEBUG_40x */ - #ifdef CONFIG_PPC_EARLY_DEBUG_16550 static void __iomem *udbg_uart_early_addr; diff --git a/arch/powerpc/kexec/file_load_64.c b/arch/powerpc/kexec/file_load_64.c index 413c76de283dc..9738adabeb1fe 100644 --- a/arch/powerpc/kexec/file_load_64.c +++ b/arch/powerpc/kexec/file_load_64.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include #include @@ -376,11 +377,10 @@ static int kdump_setup_usable_lmb(struct drmem_lmb *lmb, const __be32 **usm, static int add_usable_mem_property(void *fdt, struct device_node *dn, struct umem_info *um_info) { - int n_mem_addr_cells, n_mem_size_cells, node; + int node; char path[NODE_PATH_LEN]; - int i, len, ranges, ret; - const __be32 *prop; - u64 base, end; + int i, ret; + u64 base, size; of_node_get(dn); @@ -399,41 +399,30 @@ static int add_usable_mem_property(void *fdt, struct device_node *dn, goto out; } - /* Get the address & size cells */ - n_mem_addr_cells = of_n_addr_cells(dn); - n_mem_size_cells = of_n_size_cells(dn); - kexec_dprintk("address cells: %d, size cells: %d\n", n_mem_addr_cells, - n_mem_size_cells); - um_info->idx = 0; if (!check_realloc_usable_mem(um_info, 2)) { ret = -ENOMEM; goto out; } - prop = of_get_property(dn, "reg", &len); - if (!prop || len <= 0) { - ret = 0; - goto out; - } - /* * "reg" property represents sequence of (addr,size) tuples * each representing a memory range. */ - ranges = (len >> 2) / (n_mem_addr_cells + n_mem_size_cells); - - for (i = 0; i < ranges; i++) { - base = of_read_number(prop, n_mem_addr_cells); - prop += n_mem_addr_cells; - end = base + of_read_number(prop, n_mem_size_cells) - 1; - prop += n_mem_size_cells; + for (i = 0; ; i++) { + ret = of_property_read_reg(dn, i, &base, &size); + if (ret) + break; - ret = add_usable_mem(um_info, base, end); + ret = add_usable_mem(um_info, base, base + size - 1); if (ret) goto out; } + // No reg or empty reg? Skip this node. + if (i == 0) + goto out; + /* * No kdump kernel usable memory found in this memory node. * Write (0,0) tuple in linux,usable-memory property for diff --git a/arch/powerpc/mm/book3s64/radix_pgtable.c b/arch/powerpc/mm/book3s64/radix_pgtable.c index 15e88f1439ec2..b0d927009af83 100644 --- a/arch/powerpc/mm/book3s64/radix_pgtable.c +++ b/arch/powerpc/mm/book3s64/radix_pgtable.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include @@ -31,6 +32,7 @@ #include #include #include +#include #include @@ -293,7 +295,8 @@ static unsigned long next_boundary(unsigned long addr, unsigned long end) static int __meminit create_physical_mapping(unsigned long start, unsigned long end, - int nid, pgprot_t _prot) + int nid, pgprot_t _prot, + unsigned long mapping_sz_limit) { unsigned long vaddr, addr, mapping_size = 0; bool prev_exec, exec = false; @@ -301,7 +304,10 @@ static int __meminit create_physical_mapping(unsigned long start, int psize; unsigned long max_mapping_size = memory_block_size; - if (debug_pagealloc_enabled_or_kfence()) + if (mapping_sz_limit < max_mapping_size) + max_mapping_size = mapping_sz_limit; + + if (debug_pagealloc_enabled()) max_mapping_size = PAGE_SIZE; start = ALIGN(start, PAGE_SIZE); @@ -356,8 +362,74 @@ static int __meminit create_physical_mapping(unsigned long start, return 0; } +#ifdef CONFIG_KFENCE +static bool __ro_after_init kfence_early_init = !!CONFIG_KFENCE_SAMPLE_INTERVAL; + +static int __init parse_kfence_early_init(char *arg) +{ + int val; + + if (get_option(&arg, &val)) + kfence_early_init = !!val; + return 0; +} +early_param("kfence.sample_interval", parse_kfence_early_init); + +static inline phys_addr_t alloc_kfence_pool(void) +{ + phys_addr_t kfence_pool; + + /* + * TODO: Support to enable KFENCE after bootup depends on the ability to + * split page table mappings. As such support is not currently + * implemented for radix pagetables, support enabling KFENCE + * only at system startup for now. + * + * After support for splitting mappings is available on radix, + * alloc_kfence_pool() & map_kfence_pool() can be dropped and + * mapping for __kfence_pool memory can be + * split during arch_kfence_init_pool(). + */ + if (!kfence_early_init) + goto no_kfence; + + kfence_pool = memblock_phys_alloc(KFENCE_POOL_SIZE, PAGE_SIZE); + if (!kfence_pool) + goto no_kfence; + + memblock_mark_nomap(kfence_pool, KFENCE_POOL_SIZE); + return kfence_pool; + +no_kfence: + disable_kfence(); + return 0; +} + +static inline void map_kfence_pool(phys_addr_t kfence_pool) +{ + if (!kfence_pool) + return; + + if (create_physical_mapping(kfence_pool, kfence_pool + KFENCE_POOL_SIZE, + -1, PAGE_KERNEL, PAGE_SIZE)) + goto err; + + memblock_clear_nomap(kfence_pool, KFENCE_POOL_SIZE); + __kfence_pool = __va(kfence_pool); + return; + +err: + memblock_phys_free(kfence_pool, KFENCE_POOL_SIZE); + disable_kfence(); +} +#else +static inline phys_addr_t alloc_kfence_pool(void) { return 0; } +static inline void map_kfence_pool(phys_addr_t kfence_pool) { } +#endif + static void __init radix_init_pgtable(void) { + phys_addr_t kfence_pool; unsigned long rts_field; phys_addr_t start, end; u64 i; @@ -365,6 +437,8 @@ static void __init radix_init_pgtable(void) /* We don't support slb for radix */ slb_set_size(0); + kfence_pool = alloc_kfence_pool(); + /* * Create the linear mapping */ @@ -381,9 +455,11 @@ static void __init radix_init_pgtable(void) } WARN_ON(create_physical_mapping(start, end, - -1, PAGE_KERNEL)); + -1, PAGE_KERNEL, ~0UL)); } + map_kfence_pool(kfence_pool); + if (!cpu_has_feature(CPU_FTR_HVMODE) && cpu_has_feature(CPU_FTR_P9_RADIX_PREFETCH_BUG)) { /* @@ -875,7 +951,7 @@ int __meminit radix__create_section_mapping(unsigned long start, } return create_physical_mapping(__pa(start), __pa(end), - nid, prot); + nid, prot, ~0UL); } int __meminit radix__remove_section_mapping(unsigned long start, unsigned long end) diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c index 2156904524959..81c77ddce2e30 100644 --- a/arch/powerpc/mm/fault.c +++ b/arch/powerpc/mm/fault.c @@ -368,13 +368,13 @@ static void sanity_check_fault(bool is_write, bool is_user, * Define the correct "is_write" bit in error_code based * on the processor family */ -#if (defined(CONFIG_4xx) || defined(CONFIG_BOOKE)) +#ifdef CONFIG_BOOKE #define page_fault_is_write(__err) ((__err) & ESR_DST) #else #define page_fault_is_write(__err) ((__err) & DSISR_ISSTORE) #endif -#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE) +#ifdef CONFIG_BOOKE #define page_fault_is_bad(__err) (0) #elif defined(CONFIG_PPC_8xx) #define page_fault_is_bad(__err) ((__err) & DSISR_NOEXEC_OR_G) diff --git a/arch/powerpc/mm/init-common.c b/arch/powerpc/mm/init-common.c index d3a7726ecf512..21131b96d2090 100644 --- a/arch/powerpc/mm/init-common.c +++ b/arch/powerpc/mm/init-common.c @@ -31,6 +31,9 @@ EXPORT_SYMBOL_GPL(kernstart_virt_addr); bool disable_kuep = !IS_ENABLED(CONFIG_PPC_KUEP); bool disable_kuap = !IS_ENABLED(CONFIG_PPC_KUAP); +#ifdef CONFIG_KFENCE +bool __ro_after_init kfence_disabled; +#endif static int __init parse_nosmep(char *p) { diff --git a/arch/powerpc/mm/mmu_context.c b/arch/powerpc/mm/mmu_context.c index b24c19078eb18..3e3af29b45237 100644 --- a/arch/powerpc/mm/mmu_context.c +++ b/arch/powerpc/mm/mmu_context.c @@ -21,7 +21,7 @@ static inline void switch_mm_pgdir(struct task_struct *tsk, #ifdef CONFIG_PPC_BOOK3S_32 tsk->thread.sr0 = mm->context.sr0; #endif -#if defined(CONFIG_BOOKE_OR_40x) && defined(CONFIG_PPC_KUAP) +#if defined(CONFIG_BOOKE) && defined(CONFIG_PPC_KUAP) tsk->thread.pid = mm->context.id; #endif } diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h index 6949c2c937e72..b2d1eea097610 100644 --- a/arch/powerpc/mm/mmu_decl.h +++ b/arch/powerpc/mm/mmu_decl.h @@ -20,9 +20,9 @@ #include /* - * On 40x and 8xx, we directly inline tlbia and tlbivax + * On 8xx, we directly inline tlbia */ -#if defined(CONFIG_40x) || defined(CONFIG_PPC_8xx) +#ifdef CONFIG_PPC_8xx static inline void _tlbil_all(void) { asm volatile ("sync; tlbia; isync" : : : "memory"); @@ -35,7 +35,7 @@ static inline void _tlbil_pid(unsigned int pid) } #define _tlbil_pid_noind(pid) _tlbil_pid(pid) -#else /* CONFIG_40x || CONFIG_PPC_8xx */ +#else /* CONFIG_PPC_8xx */ extern void _tlbil_all(void); extern void _tlbil_pid(unsigned int pid); #ifdef CONFIG_PPC_BOOK3E_64 @@ -43,7 +43,7 @@ extern void _tlbil_pid_noind(unsigned int pid); #else #define _tlbil_pid_noind(pid) _tlbil_pid(pid) #endif -#endif /* !(CONFIG_40x || CONFIG_PPC_8xx) */ +#endif /* !CONFIG_PPC_8xx */ /* * On 8xx, we directly inline tlbie, on others, it's extern diff --git a/arch/powerpc/mm/nohash/40x.c b/arch/powerpc/mm/nohash/40x.c deleted file mode 100644 index e835e80c09dba..0000000000000 --- a/arch/powerpc/mm/nohash/40x.c +++ /dev/null @@ -1,161 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * This file contains the routines for initializing the MMU - * on the 4xx series of chips. - * -- paulus - * - * Derived from arch/ppc/mm/init.c: - * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) - * - * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au) - * and Cort Dougan (PReP) (cort@cs.nmt.edu) - * Copyright (C) 1996 Paul Mackerras - * - * Derived from "arch/i386/mm/init.c" - * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -/* - * MMU_init_hw does the chip-specific initialization of the MMU hardware. - */ -void __init MMU_init_hw(void) -{ - int i; - unsigned long zpr; - - /* - * The Zone Protection Register (ZPR) defines how protection will - * be applied to every page which is a member of a given zone. - * The zone index bits (of ZSEL) in the PTE are used for software - * indicators. We use the 4 upper bits of virtual address to select - * the zone. We set all zones above TASK_SIZE to zero, allowing - * only kernel access as indicated in the PTE. For zones below - * TASK_SIZE, we set a 01 binary (a value of 10 will not work) - * to allow user access as indicated in the PTE. This also allows - * kernel access as indicated in the PTE. - */ - - for (i = 0, zpr = 0; i < TASK_SIZE >> 28; i++) - zpr |= 1 << (30 - i * 2); - - mtspr(SPRN_ZPR, zpr); - - flush_instruction_cache(); - - /* - * Set up the real-mode cache parameters for the exception vector - * handlers (which are run in real-mode). - */ - - mtspr(SPRN_DCWR, 0x00000000); /* All caching is write-back */ - - /* - * Cache instruction and data space where the exception - * vectors and the kernel live in real-mode. - */ - - mtspr(SPRN_DCCR, 0xFFFF0000); /* 2GByte of data space at 0x0. */ - mtspr(SPRN_ICCR, 0xFFFF0000); /* 2GByte of instr. space at 0x0. */ -} - -#define LARGE_PAGE_SIZE_16M (1<<24) -#define LARGE_PAGE_SIZE_4M (1<<22) - -unsigned long __init mmu_mapin_ram(unsigned long base, unsigned long top) -{ - unsigned long v, s, mapped; - phys_addr_t p; - - v = KERNELBASE; - p = 0; - s = total_lowmem; - - if (IS_ENABLED(CONFIG_KFENCE)) - return 0; - - if (debug_pagealloc_enabled()) - return 0; - - if (strict_kernel_rwx_enabled()) - return 0; - - while (s >= LARGE_PAGE_SIZE_16M) { - pmd_t *pmdp; - unsigned long val = p | _PMD_SIZE_16M | _PAGE_EXEC | _PAGE_RW; - - pmdp = pmd_off_k(v); - *pmdp++ = __pmd(val); - *pmdp++ = __pmd(val); - *pmdp++ = __pmd(val); - *pmdp++ = __pmd(val); - - v += LARGE_PAGE_SIZE_16M; - p += LARGE_PAGE_SIZE_16M; - s -= LARGE_PAGE_SIZE_16M; - } - - while (s >= LARGE_PAGE_SIZE_4M) { - pmd_t *pmdp; - unsigned long val = p | _PMD_SIZE_4M | _PAGE_EXEC | _PAGE_RW; - - pmdp = pmd_off_k(v); - *pmdp = __pmd(val); - - v += LARGE_PAGE_SIZE_4M; - p += LARGE_PAGE_SIZE_4M; - s -= LARGE_PAGE_SIZE_4M; - } - - mapped = total_lowmem - s; - - /* If the size of RAM is not an exact power of two, we may not - * have covered RAM in its entirety with 16 and 4 MiB - * pages. Consequently, restrict the top end of RAM currently - * allocable so that calls to the MEMBLOCK to allocate PTEs for "tail" - * coverage with normal-sized pages (or other reasons) do not - * attempt to allocate outside the allowed range. - */ - memblock_set_current_limit(mapped); - - return mapped; -} - -void setup_initial_memory_limit(phys_addr_t first_memblock_base, - phys_addr_t first_memblock_size) -{ - /* We don't currently support the first MEMBLOCK not mapping 0 - * physical on those processors - */ - BUG_ON(first_memblock_base != 0); - - /* 40x can only access 16MB at the moment (see head_40x.S) */ - memblock_set_current_limit(min_t(u64, first_memblock_size, 0x00800000)); -} diff --git a/arch/powerpc/mm/nohash/Makefile b/arch/powerpc/mm/nohash/Makefile index b3f0498dd42f3..86d0fe4348245 100644 --- a/arch/powerpc/mm/nohash/Makefile +++ b/arch/powerpc/mm/nohash/Makefile @@ -2,7 +2,6 @@ obj-y += mmu_context.o tlb.o tlb_low.o kup.o obj-$(CONFIG_PPC_BOOK3E_64) += tlb_low_64e.o book3e_pgtable.o -obj-$(CONFIG_40x) += 40x.o obj-$(CONFIG_44x) += 44x.o obj-$(CONFIG_PPC_8xx) += 8xx.o obj-$(CONFIG_PPC_E500) += e500.o diff --git a/arch/powerpc/mm/nohash/kup.c b/arch/powerpc/mm/nohash/kup.c index e1f7de2e54ec0..c20c4f357fbf2 100644 --- a/arch/powerpc/mm/nohash/kup.c +++ b/arch/powerpc/mm/nohash/kup.c @@ -15,8 +15,6 @@ void setup_kuap(bool disabled) { if (disabled) { - if (IS_ENABLED(CONFIG_40x)) - disable_kuep = true; if (smp_processor_id() == boot_cpuid) cur_cpu_spec->mmu_features &= ~MMU_FTR_KUAP; return; diff --git a/arch/powerpc/mm/nohash/mmu_context.c b/arch/powerpc/mm/nohash/mmu_context.c index ccd5819b1bd90..0b181da40ddbb 100644 --- a/arch/powerpc/mm/nohash/mmu_context.c +++ b/arch/powerpc/mm/nohash/mmu_context.c @@ -219,9 +219,6 @@ static void set_context(unsigned long id, pgd_t *pgd) /* sync */ mb(); } else if (kuap_is_disabled()) { - if (IS_ENABLED(CONFIG_40x)) - mb(); /* sync */ - mtspr(SPRN_PID, id); isync(); } @@ -306,7 +303,7 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next, if (IS_ENABLED(CONFIG_BDI_SWITCH)) abatron_pteptrs[1] = next->pgd; set_context(id, next->pgd); -#if defined(CONFIG_BOOKE_OR_40x) && defined(CONFIG_PPC_KUAP) +#if defined(CONFIG_BOOKE) && defined(CONFIG_PPC_KUAP) tsk->thread.pid = id; #endif raw_spin_unlock(&context_lock); diff --git a/arch/powerpc/mm/nohash/tlb_low.S b/arch/powerpc/mm/nohash/tlb_low.S index e1199608ff4dc..c4d296e737319 100644 --- a/arch/powerpc/mm/nohash/tlb_low.S +++ b/arch/powerpc/mm/nohash/tlb_low.S @@ -32,32 +32,7 @@ #include #include -#if defined(CONFIG_40x) - -/* - * 40x implementation needs only tlbil_va - */ -_GLOBAL(__tlbil_va) - /* We run the search with interrupts disabled because we have to change - * the PID and I don't want to preempt when that happens. - */ - mfmsr r5 - mfspr r6,SPRN_PID - wrteei 0 - mtspr SPRN_PID,r4 - tlbsx. r3, 0, r3 - mtspr SPRN_PID,r6 - wrtee r5 - bne 1f - sync - /* There are only 64 TLB entries, so r3 < 64, which means bit 25 is - * clear. Since 25 is the V bit in the TLB_TAG, loading this value - * will invalidate the TLB entry. */ - tlbwe r3, r3, TLB_TAG - isync -1: blr - -#elif defined(CONFIG_PPC_8xx) +#if defined(CONFIG_PPC_8xx) /* * Nothing to do for 8xx, everything is inline diff --git a/arch/powerpc/mm/ptdump/Makefile b/arch/powerpc/mm/ptdump/Makefile index dc896d2874f33..0f7a050f327e7 100644 --- a/arch/powerpc/mm/ptdump/Makefile +++ b/arch/powerpc/mm/ptdump/Makefile @@ -2,7 +2,7 @@ obj-y += ptdump.o -obj-$(CONFIG_4xx) += shared.o +obj-$(CONFIG_44x) += shared.o obj-$(CONFIG_PPC_8xx) += 8xx.o obj-$(CONFIG_PPC_E500) += shared.o obj-$(CONFIG_PPC_BOOK3S_32) += shared.o diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig deleted file mode 100644 index b3c466c505353..0000000000000 --- a/arch/powerpc/platforms/40x/Kconfig +++ /dev/null @@ -1,78 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -config ACADIA - bool "Acadia" - depends on 40x - select PPC40x_SIMPLE - select 405EZ - help - This option enables support for the AMCC 405EZ Acadia evaluation board. - -config HOTFOOT - bool "Hotfoot" - depends on 40x - select PPC40x_SIMPLE - select FORCE_PCI - help - This option enables support for the ESTEEM 195E Hotfoot board. - -config KILAUEA - bool "Kilauea" - depends on 40x - select 405EX - select PPC40x_SIMPLE - select PPC4xx_PCI_EXPRESS - select FORCE_PCI - select PCI_MSI - help - This option enables support for the AMCC PPC405EX evaluation board. - -config MAKALU - bool "Makalu" - depends on 40x - select 405EX - select FORCE_PCI - select PPC4xx_PCI_EXPRESS - select PPC40x_SIMPLE - help - This option enables support for the AMCC PPC405EX board. - -config OBS600 - bool "OpenBlockS 600" - depends on 40x - select 405EX - select PPC40x_SIMPLE - help - This option enables support for PlatHome OpenBlockS 600 server - -config PPC40x_SIMPLE - bool "Simple PowerPC 40x board support" - depends on 40x - help - This option enables the simple PowerPC 40x platform support. - -config 405EX - bool - select IBM_EMAC_EMAC4 if IBM_EMAC - select IBM_EMAC_RGMII if IBM_EMAC - -config 405EZ - bool - select IBM_EMAC_NO_FLOW_CTRL if IBM_EMAC - select IBM_EMAC_MAL_CLR_ICINTSTAT if IBM_EMAC - select IBM_EMAC_MAL_COMMON_ERR if IBM_EMAC - -config PPC4xx_GPIO - bool "PPC4xx GPIO support" - depends on 40x - select GPIOLIB - select OF_GPIO_MM_GPIOCHIP - help - Enable gpiolib support for ppc40x based boards - -config APM8018X - bool "APM8018X" - depends on 40x - select PPC40x_SIMPLE - help - This option enables support for the AppliedMicro APM8018X evaluation - board. diff --git a/arch/powerpc/platforms/40x/Makefile b/arch/powerpc/platforms/40x/Makefile deleted file mode 100644 index 122de98527c4f..0000000000000 --- a/arch/powerpc/platforms/40x/Makefile +++ /dev/null @@ -1,2 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -obj-$(CONFIG_PPC40x_SIMPLE) += ppc40x_simple.o diff --git a/arch/powerpc/platforms/40x/ppc40x_simple.c b/arch/powerpc/platforms/40x/ppc40x_simple.c deleted file mode 100644 index 294ab27285889..0000000000000 --- a/arch/powerpc/platforms/40x/ppc40x_simple.c +++ /dev/null @@ -1,74 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Generic PowerPC 40x platform support - * - * Copyright 2008 IBM Corporation - * - * This implements simple platform support for PowerPC 44x chips. This is - * mostly used for eval boards or other simple and "generic" 44x boards. If - * your board has custom functions or hardware, then you will likely want to - * implement your own board.c file to accommodate it. - */ - -#include -#include -#include -#include -#include -#include - -#include -#include - -static const struct of_device_id ppc40x_of_bus[] __initconst = { - { .compatible = "ibm,plb3", }, - { .compatible = "ibm,plb4", }, - { .compatible = "ibm,opb", }, - { .compatible = "ibm,ebc", }, - { .compatible = "simple-bus", }, - {}, -}; - -static int __init ppc40x_device_probe(void) -{ - of_platform_bus_probe(NULL, ppc40x_of_bus, NULL); - - return 0; -} -machine_device_initcall(ppc40x_simple, ppc40x_device_probe); - -/* This is the list of boards that can be supported by this simple - * platform code. This does _not_ mean the boards are compatible, - * as they most certainly are not from a device tree perspective. - * However, their differences are handled by the device tree and the - * drivers and therefore they don't need custom board support files. - * - * Again, if your board needs to do things differently then create a - * board.c file for it rather than adding it to this list. - */ -static const char * const board[] __initconst = { - "amcc,acadia", - "amcc,haleakala", - "amcc,kilauea", - "amcc,makalu", - "apm,klondike", - "est,hotfoot", - "plathome,obs600", - NULL -}; - -static int __init ppc40x_probe(void) -{ - pci_set_flags(PCI_REASSIGN_ALL_RSRC); - return 1; -} - -define_machine(ppc40x_simple) { - .name = "PowerPC 40x Platform", - .compatibles = board, - .probe = ppc40x_probe, - .progress = udbg_progress, - .init_IRQ = uic_init_tree, - .get_irq = uic_get_irq, - .restart = ppc4xx_reset_system, -}; diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile index 5ba031f576520..ca7b1bb442d98 100644 --- a/arch/powerpc/platforms/44x/Makefile +++ b/arch/powerpc/platforms/44x/Makefile @@ -1,5 +1,5 @@ # SPDX-License-Identifier: GPL-2.0 -obj-y += misc_44x.o machine_check.o +obj-y += misc_44x.o machine_check.o uic.o soc.o ifneq ($(CONFIG_PPC4xx_CPM),y) obj-y += idle.o endif @@ -12,3 +12,7 @@ obj-$(CONFIG_CANYONLANDS)+= canyonlands.o obj-$(CONFIG_CURRITUCK) += ppc476.o obj-$(CONFIG_AKEBONO) += ppc476.o obj-$(CONFIG_FSP2) += fsp2.o +obj-$(CONFIG_PCI) += pci.o +obj-$(CONFIG_PPC4xx_HSTA_MSI) += hsta_msi.o +obj-$(CONFIG_PPC4xx_CPM) += cpm.o +obj-$(CONFIG_PPC4xx_GPIO) += gpio.o diff --git a/arch/powerpc/platforms/4xx/cpm.c b/arch/powerpc/platforms/44x/cpm.c similarity index 100% rename from arch/powerpc/platforms/4xx/cpm.c rename to arch/powerpc/platforms/44x/cpm.c diff --git a/arch/powerpc/platforms/4xx/gpio.c b/arch/powerpc/platforms/44x/gpio.c similarity index 100% rename from arch/powerpc/platforms/4xx/gpio.c rename to arch/powerpc/platforms/44x/gpio.c diff --git a/arch/powerpc/platforms/4xx/hsta_msi.c b/arch/powerpc/platforms/44x/hsta_msi.c similarity index 100% rename from arch/powerpc/platforms/4xx/hsta_msi.c rename to arch/powerpc/platforms/44x/hsta_msi.c diff --git a/arch/powerpc/platforms/44x/machine_check.c b/arch/powerpc/platforms/44x/machine_check.c index 5d19daacd78ad..85ff33a8d9b61 100644 --- a/arch/powerpc/platforms/44x/machine_check.c +++ b/arch/powerpc/platforms/44x/machine_check.c @@ -9,6 +9,21 @@ #include #include +int machine_check_4xx(struct pt_regs *regs) +{ + unsigned long reason = regs->esr; + + if (reason & ESR_IMCP) { + printk("Instruction"); + mtspr(SPRN_ESR, reason & ~ESR_IMCP); + } else + printk("Data"); + + printk(" machine check in kernel mode.\n"); + + return 0; +} + int machine_check_440A(struct pt_regs *regs) { unsigned long reason = regs->esr; diff --git a/arch/powerpc/platforms/4xx/pci.c b/arch/powerpc/platforms/44x/pci.c similarity index 95% rename from arch/powerpc/platforms/4xx/pci.c rename to arch/powerpc/platforms/44x/pci.c index 48626615b18bf..db6d33ca753f1 100644 --- a/arch/powerpc/platforms/4xx/pci.c +++ b/arch/powerpc/platforms/44x/pci.c @@ -1263,102 +1263,6 @@ static struct ppc4xx_pciex_hwops ppc460sx_pcie_hwops __initdata = { #endif /* CONFIG_44x */ -#ifdef CONFIG_40x - -static int __init ppc405ex_pciex_core_init(struct device_node *np) -{ - /* Nothing to do, return 2 ports */ - return 2; -} - -static void __init ppc405ex_pcie_phy_reset(struct ppc4xx_pciex_port *port) -{ - /* Assert the PE0_PHY reset */ - mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, 0x01010000); - msleep(1); - - /* deassert the PE0_hotreset */ - if (port->endpoint) - mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, 0x01111000); - else - mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, 0x01101000); - - /* poll for phy !reset */ - /* XXX FIXME add timeout */ - while (!(mfdcri(SDR0, port->sdr_base + PESDRn_405EX_PHYSTA) & 0x00001000)) - ; - - /* deassert the PE0_gpl_utl_reset */ - mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, 0x00101000); -} - -static int __init ppc405ex_pciex_init_port_hw(struct ppc4xx_pciex_port *port) -{ - u32 val; - - if (port->endpoint) - val = PTYPE_LEGACY_ENDPOINT; - else - val = PTYPE_ROOT_PORT; - - mtdcri(SDR0, port->sdr_base + PESDRn_DLPSET, - 1 << 24 | val << 20 | LNKW_X1 << 12); - - mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET1, 0x00000000); - mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET2, 0x01010000); - mtdcri(SDR0, port->sdr_base + PESDRn_405EX_PHYSET1, 0x720F0000); - mtdcri(SDR0, port->sdr_base + PESDRn_405EX_PHYSET2, 0x70600003); - - /* - * Only reset the PHY when no link is currently established. - * This is for the Atheros PCIe board which has problems to establish - * the link (again) after this PHY reset. All other currently tested - * PCIe boards don't show this problem. - * This has to be re-tested and fixed in a later release! - */ - val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP); - if (!(val & 0x00001000)) - ppc405ex_pcie_phy_reset(port); - - dcr_write(port->dcrs, DCRO_PEGPL_CFG, 0x10000000); /* guarded on */ - - port->has_ibpre = 1; - - return ppc4xx_pciex_port_reset_sdr(port); -} - -static int ppc405ex_pciex_init_utl(struct ppc4xx_pciex_port *port) -{ - dcr_write(port->dcrs, DCRO_PEGPL_SPECIAL, 0x0); - - /* - * Set buffer allocations and then assert VRB and TXE. - */ - out_be32(port->utl_base + PEUTL_OUTTR, 0x02000000); - out_be32(port->utl_base + PEUTL_INTR, 0x02000000); - out_be32(port->utl_base + PEUTL_OPDBSZ, 0x04000000); - out_be32(port->utl_base + PEUTL_PBBSZ, 0x21000000); - out_be32(port->utl_base + PEUTL_IPHBSZ, 0x02000000); - out_be32(port->utl_base + PEUTL_IPDBSZ, 0x04000000); - out_be32(port->utl_base + PEUTL_RCIRQEN, 0x00f00000); - out_be32(port->utl_base + PEUTL_PCTL, 0x80800066); - - out_be32(port->utl_base + PEUTL_PBCTL, 0x08000000); - - return 0; -} - -static struct ppc4xx_pciex_hwops ppc405ex_pcie_hwops __initdata = -{ - .want_sdr = true, - .core_init = ppc405ex_pciex_core_init, - .port_init_hw = ppc405ex_pciex_init_port_hw, - .setup_utl = ppc405ex_pciex_init_utl, - .check_link = ppc4xx_pciex_check_link_sdr, -}; - -#endif /* CONFIG_40x */ - #ifdef CONFIG_476FPE static int __init ppc_476fpe_pciex_core_init(struct device_node *np) { @@ -1427,10 +1331,6 @@ static int __init ppc4xx_pciex_check_core_init(struct device_node *np) if (of_device_is_compatible(np, "ibm,plb-pciex-apm821xx")) ppc4xx_pciex_hwops = &apm821xx_pcie_hwops; #endif /* CONFIG_44x */ -#ifdef CONFIG_40x - if (of_device_is_compatible(np, "ibm,plb-pciex-405ex")) - ppc4xx_pciex_hwops = &ppc405ex_pcie_hwops; -#endif #ifdef CONFIG_476FPE if (of_device_is_compatible(np, "ibm,plb-pciex-476fpe") || of_device_is_compatible(np, "ibm,plb-pciex-476gtr")) diff --git a/arch/powerpc/platforms/4xx/pci.h b/arch/powerpc/platforms/44x/pci.h similarity index 100% rename from arch/powerpc/platforms/4xx/pci.h rename to arch/powerpc/platforms/44x/pci.h diff --git a/arch/powerpc/platforms/4xx/soc.c b/arch/powerpc/platforms/44x/soc.c similarity index 100% rename from arch/powerpc/platforms/4xx/soc.c rename to arch/powerpc/platforms/44x/soc.c diff --git a/arch/powerpc/platforms/4xx/uic.c b/arch/powerpc/platforms/44x/uic.c similarity index 100% rename from arch/powerpc/platforms/4xx/uic.c rename to arch/powerpc/platforms/44x/uic.c diff --git a/arch/powerpc/platforms/4xx/Makefile b/arch/powerpc/platforms/4xx/Makefile deleted file mode 100644 index 2071a0abe09be..0000000000000 --- a/arch/powerpc/platforms/4xx/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -obj-y += uic.o machine_check.o -obj-$(CONFIG_4xx_SOC) += soc.o -obj-$(CONFIG_PCI) += pci.o -obj-$(CONFIG_PPC4xx_HSTA_MSI) += hsta_msi.o -obj-$(CONFIG_PPC4xx_CPM) += cpm.o -obj-$(CONFIG_PPC4xx_GPIO) += gpio.o diff --git a/arch/powerpc/platforms/4xx/machine_check.c b/arch/powerpc/platforms/4xx/machine_check.c deleted file mode 100644 index a905da1d6f415..0000000000000 --- a/arch/powerpc/platforms/4xx/machine_check.c +++ /dev/null @@ -1,23 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - */ - -#include -#include -#include - -#include - -int machine_check_4xx(struct pt_regs *regs) -{ - unsigned long reason = regs->esr; - - if (reason & ESR_IMCP) { - printk("Instruction"); - mtspr(SPRN_ESR, reason & ~ESR_IMCP); - } else - printk("Data"); - printk(" machine check in kernel mode.\n"); - - return 0; -} diff --git a/arch/powerpc/platforms/85xx/t1042rdb_diu.c b/arch/powerpc/platforms/85xx/t1042rdb_diu.c index 767eed98a0a8b..d4fbb6eff38ae 100644 --- a/arch/powerpc/platforms/85xx/t1042rdb_diu.c +++ b/arch/powerpc/platforms/85xx/t1042rdb_diu.c @@ -149,4 +149,5 @@ static int __init t1042rdb_diu_init(void) early_initcall(t1042rdb_diu_init); +MODULE_DESCRIPTION("Freescale T1042 DIU driver"); MODULE_LICENSE("GPL"); diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index 1fd253f92a774..1112a58316191 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -18,7 +18,6 @@ source "arch/powerpc/platforms/85xx/Kconfig" source "arch/powerpc/platforms/86xx/Kconfig" source "arch/powerpc/platforms/embedded6xx/Kconfig" source "arch/powerpc/platforms/44x/Kconfig" -source "arch/powerpc/platforms/40x/Kconfig" source "arch/powerpc/platforms/amigaone/Kconfig" source "arch/powerpc/platforms/book3s/Kconfig" source "arch/powerpc/platforms/microwatt/Kconfig" diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype index b2d8c0da2ad9d..1ec98688c915e 100644 --- a/arch/powerpc/platforms/Kconfig.cputype +++ b/arch/powerpc/platforms/Kconfig.cputype @@ -43,19 +43,10 @@ config PPC_8xx select HAVE_ARCH_VMAP_STACK select HUGETLBFS -config 40x - bool "AMCC 40x" - select PPC_DCR_NATIVE - select PPC_UDBG_16550 - select 4xx_SOC - select HAVE_PCI - select PPC_KUEP if PPC_KUAP - config 44x bool "AMCC 44x, 46x or 47x" select PPC_DCR_NATIVE select PPC_UDBG_16550 - select 4xx_SOC select HAVE_PCI select PHYS_64BIT select PPC_KUEP @@ -194,11 +185,6 @@ config E6500_CPU depends on !CC_IS_CLANG select PPC_HAS_LBARX_LHARX -config 405_CPU - bool "40x family" - depends on 40x - depends on !CC_IS_CLANG - config 440_CPU bool "440 (44x family)" depends on 44x @@ -340,7 +326,7 @@ config FSL_EMB_PERF_EVENT_E500 config 4xx bool - depends on 40x || 44x + depends on 44x default y config BOOKE @@ -348,11 +334,6 @@ config BOOKE depends on PPC_E500 || 44x default y -config BOOKE_OR_40x - bool - depends on BOOKE || 40x - default y - config PTE_64BIT bool depends on 44x || PPC_E500 || PPC_86xx @@ -495,8 +476,8 @@ config PPC_KERNEL_PCREL This option builds the kernel with the pc relative ABI model. config PPC_KUEP - bool "Kernel Userspace Execution Prevention" if !40x - default y if !40x + bool "Kernel Userspace Execution Prevention" + default y help Enable support for Kernel Userspace Execution Prevention (KUEP) @@ -582,7 +563,7 @@ config NR_CPUS config NOT_COHERENT_CACHE bool - depends on 4xx || PPC_8xx || PPC_MPC512x || \ + depends on 44x || PPC_8xx || PPC_MPC512x || \ GAMECUBE_COMMON || AMIGAONE select ARCH_HAS_DMA_PREP_COHERENT select ARCH_HAS_SYNC_DMA_FOR_DEVICE diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile index 94470fb27c99b..786d374bff317 100644 --- a/arch/powerpc/platforms/Makefile +++ b/arch/powerpc/platforms/Makefile @@ -4,8 +4,6 @@ obj-$(CONFIG_FSL_ULI1575) += fsl_uli1575.o obj-$(CONFIG_PPC_PMAC) += powermac/ obj-$(CONFIG_PPC_CHRP) += chrp/ -obj-$(CONFIG_4xx) += 4xx/ -obj-$(CONFIG_40x) += 40x/ obj-$(CONFIG_44x) += 44x/ obj-$(CONFIG_PPC_MPC512x) += 512x/ obj-$(CONFIG_PPC_MPC52xx) += 52xx/ diff --git a/arch/powerpc/platforms/cell/cbe_powerbutton.c b/arch/powerpc/platforms/cell/cbe_powerbutton.c index a3ee397486f6f..3d121acdf69b3 100644 --- a/arch/powerpc/platforms/cell/cbe_powerbutton.c +++ b/arch/powerpc/platforms/cell/cbe_powerbutton.c @@ -101,5 +101,6 @@ static void __exit cbe_powerbutton_exit(void) module_init(cbe_powerbutton_init); module_exit(cbe_powerbutton_exit); +MODULE_DESCRIPTION("Driver for powerbutton on IBM cell blades"); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Christian Krafft "); diff --git a/arch/powerpc/platforms/cell/cbe_thermal.c b/arch/powerpc/platforms/cell/cbe_thermal.c index 2f45428e32c89..c295c6714f9bc 100644 --- a/arch/powerpc/platforms/cell/cbe_thermal.c +++ b/arch/powerpc/platforms/cell/cbe_thermal.c @@ -381,6 +381,7 @@ static void __exit thermal_exit(void) } module_exit(thermal_exit); +MODULE_DESCRIPTION("Cell processor thermal driver"); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Christian Krafft "); diff --git a/arch/powerpc/platforms/cell/cpufreq_spudemand.c b/arch/powerpc/platforms/cell/cpufreq_spudemand.c index ca7849e113d7f..79172ba36ecad 100644 --- a/arch/powerpc/platforms/cell/cpufreq_spudemand.c +++ b/arch/powerpc/platforms/cell/cpufreq_spudemand.c @@ -129,5 +129,6 @@ static struct cpufreq_governor spu_governor = { cpufreq_governor_init(spu_governor); cpufreq_governor_exit(spu_governor); +MODULE_DESCRIPTION("SPU-aware cpufreq governor for the cell processor"); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Christian Krafft "); diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c index 030de2b8c145f..70236d1df3d3e 100644 --- a/arch/powerpc/platforms/cell/spufs/inode.c +++ b/arch/powerpc/platforms/cell/spufs/inode.c @@ -822,6 +822,7 @@ static void __exit spufs_exit(void) } module_exit(spufs_exit); +MODULE_DESCRIPTION("SPU file system"); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Arnd Bergmann "); diff --git a/arch/powerpc/platforms/chrp/nvram.c b/arch/powerpc/platforms/chrp/nvram.c index 0eedae96498c1..d3bf56a46656e 100644 --- a/arch/powerpc/platforms/chrp/nvram.c +++ b/arch/powerpc/platforms/chrp/nvram.c @@ -92,4 +92,5 @@ void __init chrp_nvram_init(void) return; } +MODULE_DESCRIPTION("PPC NVRAM device driver"); MODULE_LICENSE("GPL v2"); diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c index 23f5b5093ec18..b0a14e48175c6 100644 --- a/arch/powerpc/platforms/powernv/pci-ioda.c +++ b/arch/powerpc/platforms/powernv/pci-ioda.c @@ -1537,7 +1537,8 @@ static void pnv_ioda_setup_bus_dma(struct pnv_ioda_pe *pe, struct pci_bus *bus) } } -static long pnv_ioda2_take_ownership(struct iommu_table_group *table_group) +static long pnv_ioda2_take_ownership(struct iommu_table_group *table_group, + struct device *dev __maybe_unused) { struct pnv_ioda_pe *pe = container_of(table_group, struct pnv_ioda_pe, table_group); @@ -1562,7 +1563,8 @@ static long pnv_ioda2_take_ownership(struct iommu_table_group *table_group) return 0; } -static void pnv_ioda2_release_ownership(struct iommu_table_group *table_group) +static void pnv_ioda2_release_ownership(struct iommu_table_group *table_group, + struct device *dev __maybe_unused) { struct pnv_ioda_pe *pe = container_of(table_group, struct pnv_ioda_pe, table_group); diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c index bbc87e53db56d..534cd159e9ab4 100644 --- a/arch/powerpc/platforms/pseries/iommu.c +++ b/arch/powerpc/platforms/pseries/iommu.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include @@ -67,6 +68,10 @@ static struct iommu_table *iommu_pseries_alloc_table(int node) return tbl; } +#ifdef CONFIG_IOMMU_API +static struct iommu_table_group_ops spapr_tce_table_group_ops; +#endif + static struct iommu_table_group *iommu_pseries_alloc_group(int node) { struct iommu_table_group *table_group; @@ -102,7 +107,7 @@ static void iommu_pseries_free_group(struct iommu_table_group *table_group, #endif /* Default DMA window table is at index 0, while DDW at 1. SR-IOV - * adapters only have table on index 1. + * adapters only have table on index 0(if not direct mapped). */ if (table_group->tables[0]) iommu_tce_table_put(table_group->tables[0]); @@ -143,7 +148,7 @@ static int tce_build_pSeries(struct iommu_table *tbl, long index, } -static void tce_free_pSeries(struct iommu_table *tbl, long index, long npages) +static void tce_clear_pSeries(struct iommu_table *tbl, long index, long npages) { __be64 *tcep; @@ -162,6 +167,39 @@ static unsigned long tce_get_pseries(struct iommu_table *tbl, long index) return be64_to_cpu(*tcep); } +#ifdef CONFIG_IOMMU_API +static long pseries_tce_iommu_userspace_view_alloc(struct iommu_table *tbl) +{ + unsigned long cb = ALIGN(sizeof(tbl->it_userspace[0]) * tbl->it_size, PAGE_SIZE); + unsigned long *uas; + + if (tbl->it_indirect_levels) /* Impossible */ + return -EPERM; + + WARN_ON(tbl->it_userspace); + + uas = vzalloc(cb); + if (!uas) + return -ENOMEM; + + tbl->it_userspace = (__be64 *) uas; + + return 0; +} +#endif + +static void tce_iommu_userspace_view_free(struct iommu_table *tbl) +{ + vfree(tbl->it_userspace); + tbl->it_userspace = NULL; +} + +static void tce_free_pSeries(struct iommu_table *tbl) +{ + if (!tbl->it_userspace) + tce_iommu_userspace_view_free(tbl); +} + static void tce_free_pSeriesLP(unsigned long liobn, long, long, long); static void tce_freemulti_pSeriesLP(struct iommu_table*, long, long); @@ -576,7 +614,7 @@ struct iommu_table_ops iommu_table_lpar_multi_ops; struct iommu_table_ops iommu_table_pseries_ops = { .set = tce_build_pSeries, - .clear = tce_free_pSeries, + .clear = tce_clear_pSeries, .get = tce_get_pseries }; @@ -685,17 +723,47 @@ static int tce_exchange_pseries(struct iommu_table *tbl, long index, unsigned return rc; } + +static __be64 *tce_useraddr_pSeriesLP(struct iommu_table *tbl, long index, + bool __always_unused alloc) +{ + return tbl->it_userspace ? &tbl->it_userspace[index - tbl->it_offset] : NULL; +} #endif struct iommu_table_ops iommu_table_lpar_multi_ops = { .set = tce_buildmulti_pSeriesLP, #ifdef CONFIG_IOMMU_API .xchg_no_kill = tce_exchange_pseries, + .useraddrptr = tce_useraddr_pSeriesLP, #endif .clear = tce_freemulti_pSeriesLP, - .get = tce_get_pSeriesLP + .get = tce_get_pSeriesLP, + .free = tce_free_pSeries }; +#ifdef CONFIG_IOMMU_API +/* + * When the DMA window properties might have been removed, + * the parent node has the table_group setup on it. + */ +static struct device_node *pci_dma_find_parent_node(struct pci_dev *dev, + struct iommu_table_group *table_group) +{ + struct device_node *dn = pci_device_to_OF_node(dev); + struct pci_dn *rpdn; + + for (; dn && PCI_DN(dn); dn = dn->parent) { + rpdn = PCI_DN(dn); + + if (table_group == rpdn->table_group) + return dn; + } + + return NULL; +} +#endif + /* * Find nearest ibm,dma-window (default DMA window) or direct DMA window or * dynamic 64bit DMA window, walking up the device tree. @@ -812,13 +880,6 @@ static void pci_dma_bus_setup_pSeriesLP(struct pci_bus *bus) be32_to_cpu(prop.tce_shift), NULL, &iommu_table_lpar_multi_ops); - /* Only for normal boot with default window. Doesn't matter even - * if we set these with DDW which is 64bit during kdump, since - * these will not be used during kdump. - */ - ppci->table_group->tce32_start = be64_to_cpu(prop.dma_base); - ppci->table_group->tce32_size = 1 << be32_to_cpu(prop.window_shift); - if (!iommu_init_table(tbl, ppci->phb->node, 0, 0)) panic("Failed to initialize iommu table"); @@ -917,7 +978,7 @@ static void __remove_dma_window(struct device_node *np, u32 *ddw_avail, u64 liob } static void remove_dma_window(struct device_node *np, u32 *ddw_avail, - struct property *win) + struct property *win, bool cleanup) { struct dynamic_dma_window_prop *dwp; u64 liobn; @@ -925,11 +986,44 @@ static void remove_dma_window(struct device_node *np, u32 *ddw_avail, dwp = win->value; liobn = (u64)be32_to_cpu(dwp->liobn); - clean_dma_window(np, dwp); + if (cleanup) + clean_dma_window(np, dwp); __remove_dma_window(np, ddw_avail, liobn); } -static int remove_ddw(struct device_node *np, bool remove_prop, const char *win_name) +static void copy_property(struct device_node *pdn, const char *from, const char *to) +{ + struct property *src, *dst; + + src = of_find_property(pdn, from, NULL); + if (!src) + return; + + dst = kzalloc(sizeof(*dst), GFP_KERNEL); + if (!dst) + return; + + dst->name = kstrdup(to, GFP_KERNEL); + dst->value = kmemdup(src->value, src->length, GFP_KERNEL); + dst->length = src->length; + if (!dst->name || !dst->value) + return; + + if (of_add_property(pdn, dst)) { + pr_err("Unable to add DMA window property for %pOF", pdn); + goto free_prop; + } + + return; + +free_prop: + kfree(dst->name); + kfree(dst->value); + kfree(dst); +} + +static int remove_dma_window_named(struct device_node *np, bool remove_prop, const char *win_name, + bool cleanup) { struct property *win; u32 ddw_avail[DDW_APPLICABLE_SIZE]; @@ -944,13 +1038,20 @@ static int remove_ddw(struct device_node *np, bool remove_prop, const char *win_ if (ret) return 0; - if (win->length >= sizeof(struct dynamic_dma_window_prop)) - remove_dma_window(np, ddw_avail, win); + remove_dma_window(np, ddw_avail, win, cleanup); if (!remove_prop) return 0; + /* Default window property if removed is lost as reset-pe doesn't restore it. + * Though FDT has a copy of it, the DLPAR hotplugged devices will not have a + * node on FDT until next reboot. So, back it up. + */ + if ((strcmp(win_name, "ibm,dma-window") == 0) && + !of_find_property(np, "ibm,dma-window-saved", NULL)) + copy_property(np, win_name, "ibm,dma-window-saved"); + ret = of_remove_property(np, win); if (ret) pr_warn("%pOF: failed to remove DMA window property: %d\n", @@ -1008,7 +1109,7 @@ static void find_existing_ddw_windows_named(const char *name) for_each_node_with_property(pdn, name) { dma64 = of_get_property(pdn, name, &len); if (!dma64 || len < sizeof(*dma64)) { - remove_ddw(pdn, true, name); + remove_dma_window_named(pdn, true, name, true); continue; } @@ -1386,7 +1487,7 @@ static bool enable_ddw(struct pci_dev *dev, struct device_node *pdn) if (reset_win_ext) goto out_failed; - remove_dma_window(pdn, ddw_avail, default_win); + remove_dma_window(pdn, ddw_avail, default_win, true); default_win_removed = true; /* Query again, to check if the window is available */ @@ -1509,6 +1610,11 @@ static bool enable_ddw(struct pci_dev *dev, struct device_node *pdn) clean_dma_window(pdn, win64->value); goto out_del_list; } + if (default_win_removed) { + iommu_tce_table_put(pci->table_group->tables[0]); + pci->table_group->tables[0] = NULL; + set_iommu_table_base(&dev->dev, NULL); + } } if (dynamic_mapping) { @@ -1546,16 +1652,15 @@ static bool enable_ddw(struct pci_dev *dev, struct device_node *pdn) &iommu_table_lpar_multi_ops); iommu_init_table(newtbl, pci->phb->node, start, end); - pci->table_group->tables[1] = newtbl; + pci->table_group->tables[default_win_removed ? 0 : 1] = newtbl; set_iommu_table_base(&dev->dev, newtbl); } if (default_win_removed) { - iommu_tce_table_put(pci->table_group->tables[0]); - pci->table_group->tables[0] = NULL; - /* default_win is valid here because default_win_removed == true */ + if (!of_find_property(pdn, "ibm,dma-window-saved", NULL)) + copy_property(pdn, "ibm,dma-window", "ibm,dma-window-saved"); of_remove_property(pdn, default_win); dev_info(&dev->dev, "Removed default DMA window for %pOF\n", pdn); } @@ -1605,6 +1710,71 @@ static bool enable_ddw(struct pci_dev *dev, struct device_node *pdn) return direct_mapping; } +static __u64 query_page_size_to_mask(u32 query_page_size) +{ + const long shift[] = { + (SZ_4K), (SZ_64K), (SZ_16M), + (SZ_32M), (SZ_64M), (SZ_128M), + (SZ_256M), (SZ_16G), (SZ_2M) + }; + int i, ret = 0; + + for (i = 0; i < ARRAY_SIZE(shift); i++) { + if (query_page_size & (1 << i)) + ret |= shift[i]; + } + + return ret; +} + +static void spapr_tce_init_table_group(struct pci_dev *pdev, + struct device_node *pdn, + struct dynamic_dma_window_prop prop) +{ + struct iommu_table_group *table_group = PCI_DN(pdn)->table_group; + u32 ddw_avail[DDW_APPLICABLE_SIZE]; + + struct ddw_query_response query; + int ret; + + /* Only for normal boot with default window. Doesn't matter during + * kdump, since these will not be used during kdump. + */ + if (is_kdump_kernel()) + return; + + if (table_group->max_dynamic_windows_supported != 0) + return; /* already initialized */ + + table_group->tce32_start = be64_to_cpu(prop.dma_base); + table_group->tce32_size = 1 << be32_to_cpu(prop.window_shift); + + if (!of_find_property(pdn, "ibm,dma-window", NULL)) + dev_err(&pdev->dev, "default dma window missing!\n"); + + ret = of_property_read_u32_array(pdn, "ibm,ddw-applicable", + &ddw_avail[0], DDW_APPLICABLE_SIZE); + if (ret) { + table_group->max_dynamic_windows_supported = -1; + return; + } + + ret = query_ddw(pdev, ddw_avail, &query, pdn); + if (ret) { + dev_err(&pdev->dev, "%s: query_ddw failed\n", __func__); + table_group->max_dynamic_windows_supported = -1; + return; + } + + if (query.windows_available == 0) + table_group->max_dynamic_windows_supported = 1; + else + table_group->max_dynamic_windows_supported = IOMMU_TABLE_GROUP_MAX_TABLES; + + table_group->max_levels = 1; + table_group->pgsizes |= query_page_size_to_mask(query.page_size); +} + static void pci_dma_dev_setup_pSeriesLP(struct pci_dev *dev) { struct device_node *pdn, *dn; @@ -1644,13 +1814,6 @@ static void pci_dma_dev_setup_pSeriesLP(struct pci_dev *dev) be32_to_cpu(prop.tce_shift), NULL, &iommu_table_lpar_multi_ops); - /* Only for normal boot with default window. Doesn't matter even - * if we set these with DDW which is 64bit during kdump, since - * these will not be used during kdump. - */ - pci->table_group->tce32_start = be64_to_cpu(prop.dma_base); - pci->table_group->tce32_size = 1 << be32_to_cpu(prop.window_shift); - iommu_init_table(tbl, pci->phb->node, 0, 0); iommu_register_group(pci->table_group, pci_domain_nr(pci->phb->bus), 0); @@ -1659,6 +1822,8 @@ static void pci_dma_dev_setup_pSeriesLP(struct pci_dev *dev) pr_debug(" found DMA window, table: %p\n", pci->table_group); } + spapr_tce_init_table_group(dev, pdn, prop); + set_iommu_table_base(&dev->dev, pci->table_group->tables[0]); iommu_add_device(pci->table_group, &dev->dev); } @@ -1686,6 +1851,491 @@ static bool iommu_bypass_supported_pSeriesLP(struct pci_dev *pdev, u64 dma_mask) return false; } +#ifdef CONFIG_IOMMU_API +/* + * A simple iommu_table_group_ops which only allows reusing the existing + * iommu_table. This handles VFIO for POWER7 or the nested KVM. + * The ops does not allow creating windows and only allows reusing the existing + * one if it matches table_group->tce32_start/tce32_size/page_shift. + */ +static unsigned long spapr_tce_get_table_size(__u32 page_shift, + __u64 window_size, __u32 levels) +{ + unsigned long size; + + if (levels > 1) + return ~0U; + size = window_size >> (page_shift - 3); + return size; +} + +static struct pci_dev *iommu_group_get_first_pci_dev(struct iommu_group *group) +{ + struct pci_dev *pdev = NULL; + int ret; + + /* No IOMMU group ? */ + if (!group) + return NULL; + + ret = iommu_group_for_each_dev(group, &pdev, dev_has_iommu_table); + if (!ret || !pdev) + return NULL; + return pdev; +} + +static void restore_default_dma_window(struct pci_dev *pdev, struct device_node *pdn) +{ + reset_dma_window(pdev, pdn); + copy_property(pdn, "ibm,dma-window-saved", "ibm,dma-window"); +} + +static long remove_dynamic_dma_windows(struct pci_dev *pdev, struct device_node *pdn) +{ + struct pci_dn *pci = PCI_DN(pdn); + struct dma_win *window; + bool direct_mapping; + int len; + + if (find_existing_ddw(pdn, &pdev->dev.archdata.dma_offset, &len, &direct_mapping)) { + remove_dma_window_named(pdn, true, direct_mapping ? + DIRECT64_PROPNAME : DMA64_PROPNAME, true); + if (!direct_mapping) { + WARN_ON(!pci->table_group->tables[0] && !pci->table_group->tables[1]); + + if (pci->table_group->tables[1]) { + iommu_tce_table_put(pci->table_group->tables[1]); + pci->table_group->tables[1] = NULL; + } else if (pci->table_group->tables[0]) { + /* Default window was removed and only the DDW exists */ + iommu_tce_table_put(pci->table_group->tables[0]); + pci->table_group->tables[0] = NULL; + } + } + spin_lock(&dma_win_list_lock); + list_for_each_entry(window, &dma_win_list, list) { + if (window->device == pdn) { + list_del(&window->list); + kfree(window); + break; + } + } + spin_unlock(&dma_win_list_lock); + } + + return 0; +} + +static long pseries_setup_default_iommu_config(struct iommu_table_group *table_group, + struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + const __be32 *default_prop; + long liobn, offset, size; + struct device_node *pdn; + struct iommu_table *tbl; + struct pci_dn *pci; + + pdn = pci_dma_find_parent_node(pdev, table_group); + if (!pdn || !PCI_DN(pdn)) { + dev_warn(&pdev->dev, "No table_group configured for the node %pOF\n", pdn); + return -1; + } + pci = PCI_DN(pdn); + + /* The default window is restored if not present already on removal of DDW. + * However, if used by VFIO SPAPR sub driver, the user's order of removal of + * windows might have been different to not leading to auto restoration, + * suppose the DDW was removed first followed by the default one. + * So, restore the default window with reset-pe-dma call explicitly. + */ + restore_default_dma_window(pdev, pdn); + + default_prop = of_get_property(pdn, "ibm,dma-window", NULL); + of_parse_dma_window(pdn, default_prop, &liobn, &offset, &size); + tbl = iommu_pseries_alloc_table(pci->phb->node); + if (!tbl) { + dev_err(&pdev->dev, "couldn't create new IOMMU table\n"); + return -1; + } + + iommu_table_setparms_common(tbl, pci->phb->bus->number, liobn, offset, + size, IOMMU_PAGE_SHIFT_4K, NULL, + &iommu_table_lpar_multi_ops); + iommu_init_table(tbl, pci->phb->node, 0, 0); + + pci->table_group->tables[0] = tbl; + set_iommu_table_base(&pdev->dev, tbl); + + return 0; +} + +static bool is_default_window_request(struct iommu_table_group *table_group, __u32 page_shift, + __u64 window_size) +{ + if ((window_size <= table_group->tce32_size) && + (page_shift == IOMMU_PAGE_SHIFT_4K)) + return true; + + return false; +} + +static long spapr_tce_create_table(struct iommu_table_group *table_group, int num, + __u32 page_shift, __u64 window_size, __u32 levels, + struct iommu_table **ptbl) +{ + struct pci_dev *pdev = iommu_group_get_first_pci_dev(table_group->group); + u32 ddw_avail[DDW_APPLICABLE_SIZE]; + struct ddw_create_response create; + unsigned long liobn, offset, size; + unsigned long start = 0, end = 0; + struct ddw_query_response query; + const __be32 *default_prop; + struct failed_ddw_pdn *fpdn; + unsigned int window_shift; + struct device_node *pdn; + struct iommu_table *tbl; + struct dma_win *window; + struct property *win64; + struct pci_dn *pci; + u64 win_addr; + int len, i; + long ret; + + if (!is_power_of_2(window_size) || levels > 1) + return -EINVAL; + + window_shift = order_base_2(window_size); + + mutex_lock(&dma_win_init_mutex); + + ret = -ENODEV; + + pdn = pci_dma_find_parent_node(pdev, table_group); + if (!pdn || !PCI_DN(pdn)) { /* Niether of 32s|64-bit exist! */ + dev_warn(&pdev->dev, "No dma-windows exist for the node %pOF\n", pdn); + goto out_failed; + } + pci = PCI_DN(pdn); + + /* If the enable DDW failed for the pdn, dont retry! */ + list_for_each_entry(fpdn, &failed_ddw_pdn_list, list) { + if (fpdn->pdn == pdn) { + dev_info(&pdev->dev, "%pOF in failed DDW device list\n", pdn); + goto out_unlock; + } + } + + tbl = iommu_pseries_alloc_table(pci->phb->node); + if (!tbl) { + dev_dbg(&pdev->dev, "couldn't create new IOMMU table\n"); + goto out_unlock; + } + + if (num == 0) { + bool direct_mapping; + /* The request is not for default window? Ensure there is no DDW window already */ + if (!is_default_window_request(table_group, page_shift, window_size)) { + if (find_existing_ddw(pdn, &pdev->dev.archdata.dma_offset, &len, + &direct_mapping)) { + dev_warn(&pdev->dev, "%pOF: 64-bit window already present.", pdn); + ret = -EPERM; + goto out_unlock; + } + } else { + /* Request is for Default window, ensure there is no DDW if there is a + * need to reset. reset-pe otherwise removes the DDW also + */ + default_prop = of_get_property(pdn, "ibm,dma-window", NULL); + if (!default_prop) { + if (find_existing_ddw(pdn, &pdev->dev.archdata.dma_offset, &len, + &direct_mapping)) { + dev_warn(&pdev->dev, "%pOF: Attempt to create window#0 when 64-bit window is present. Preventing the attempt as that would destroy the 64-bit window", + pdn); + ret = -EPERM; + goto out_unlock; + } + + restore_default_dma_window(pdev, pdn); + + default_prop = of_get_property(pdn, "ibm,dma-window", NULL); + of_parse_dma_window(pdn, default_prop, &liobn, &offset, &size); + /* Limit the default window size to window_size */ + iommu_table_setparms_common(tbl, pci->phb->bus->number, liobn, + offset, 1UL << window_shift, + IOMMU_PAGE_SHIFT_4K, NULL, + &iommu_table_lpar_multi_ops); + iommu_init_table(tbl, pci->phb->node, start, end); + + table_group->tables[0] = tbl; + + mutex_unlock(&dma_win_init_mutex); + + goto exit; + } + } + } + + ret = of_property_read_u32_array(pdn, "ibm,ddw-applicable", + &ddw_avail[0], DDW_APPLICABLE_SIZE); + if (ret) { + dev_info(&pdev->dev, "ibm,ddw-applicable not found\n"); + goto out_failed; + } + ret = -ENODEV; + + pr_err("%s: Calling query %pOF\n", __func__, pdn); + ret = query_ddw(pdev, ddw_avail, &query, pdn); + if (ret) + goto out_failed; + ret = -ENODEV; + + len = window_shift; + if (query.largest_available_block < (1ULL << (len - page_shift))) { + dev_dbg(&pdev->dev, "can't map window 0x%llx with %llu %llu-sized pages\n", + 1ULL << len, query.largest_available_block, + 1ULL << page_shift); + ret = -EINVAL; /* Retry with smaller window size */ + goto out_unlock; + } + + if (create_ddw(pdev, ddw_avail, &create, page_shift, len)) { + pr_err("%s: Create ddw failed %pOF\n", __func__, pdn); + goto out_failed; + } + + win_addr = ((u64)create.addr_hi << 32) | create.addr_lo; + win64 = ddw_property_create(DMA64_PROPNAME, create.liobn, win_addr, page_shift, len); + if (!win64) + goto remove_window; + + ret = of_add_property(pdn, win64); + if (ret) { + dev_err(&pdev->dev, "unable to add DMA window property for %pOF: %ld", pdn, ret); + goto free_property; + } + ret = -ENODEV; + + window = ddw_list_new_entry(pdn, win64->value); + if (!window) + goto remove_property; + + window->direct = false; + + for (i = 0; i < ARRAY_SIZE(pci->phb->mem_resources); i++) { + const unsigned long mask = IORESOURCE_MEM_64 | IORESOURCE_MEM; + + /* Look for MMIO32 */ + if ((pci->phb->mem_resources[i].flags & mask) == IORESOURCE_MEM) { + start = pci->phb->mem_resources[i].start; + end = pci->phb->mem_resources[i].end; + break; + } + } + + /* New table for using DDW instead of the default DMA window */ + iommu_table_setparms_common(tbl, pci->phb->bus->number, create.liobn, win_addr, + 1UL << len, page_shift, NULL, &iommu_table_lpar_multi_ops); + iommu_init_table(tbl, pci->phb->node, start, end); + + pci->table_group->tables[num] = tbl; + set_iommu_table_base(&pdev->dev, tbl); + pdev->dev.archdata.dma_offset = win_addr; + + spin_lock(&dma_win_list_lock); + list_add(&window->list, &dma_win_list); + spin_unlock(&dma_win_list_lock); + + mutex_unlock(&dma_win_init_mutex); + + goto exit; + +remove_property: + of_remove_property(pdn, win64); +free_property: + kfree(win64->name); + kfree(win64->value); + kfree(win64); +remove_window: + __remove_dma_window(pdn, ddw_avail, create.liobn); + +out_failed: + fpdn = kzalloc(sizeof(*fpdn), GFP_KERNEL); + if (!fpdn) + goto out_unlock; + fpdn->pdn = pdn; + list_add(&fpdn->list, &failed_ddw_pdn_list); + +out_unlock: + mutex_unlock(&dma_win_init_mutex); + + return ret; +exit: + /* Allocate the userspace view */ + pseries_tce_iommu_userspace_view_alloc(tbl); + tbl->it_allocated_size = spapr_tce_get_table_size(page_shift, window_size, levels); + + *ptbl = iommu_tce_table_get(tbl); + + return 0; +} + +static bool is_default_window_table(struct iommu_table_group *table_group, struct iommu_table *tbl) +{ + if (((tbl->it_size << tbl->it_page_shift) <= table_group->tce32_size) && + (tbl->it_page_shift == IOMMU_PAGE_SHIFT_4K)) + return true; + + return false; +} + +static long spapr_tce_set_window(struct iommu_table_group *table_group, + int num, struct iommu_table *tbl) +{ + return tbl == table_group->tables[num] ? 0 : -EPERM; +} + +static long spapr_tce_unset_window(struct iommu_table_group *table_group, int num) +{ + struct pci_dev *pdev = iommu_group_get_first_pci_dev(table_group->group); + struct device_node *dn = pci_device_to_OF_node(pdev), *pdn; + struct iommu_table *tbl = table_group->tables[num]; + struct failed_ddw_pdn *fpdn; + struct dma_win *window; + const char *win_name; + int ret = -ENODEV; + + mutex_lock(&dma_win_init_mutex); + + if ((num == 0) && is_default_window_table(table_group, tbl)) + win_name = "ibm,dma-window"; + else + win_name = DMA64_PROPNAME; + + pdn = pci_dma_find(dn, NULL); + if (!pdn || !PCI_DN(pdn)) { /* Niether of 32s|64-bit exist! */ + dev_warn(&pdev->dev, "No dma-windows exist for the node %pOF\n", pdn); + goto out_failed; + } + + /* Dont clear the TCEs, User should have done it */ + if (remove_dma_window_named(pdn, true, win_name, false)) { + pr_err("%s: The existing DDW removal failed for node %pOF\n", __func__, pdn); + goto out_failed; /* Could not remove it either! */ + } + + if (strcmp(win_name, DMA64_PROPNAME) == 0) { + spin_lock(&dma_win_list_lock); + list_for_each_entry(window, &dma_win_list, list) { + if (window->device == pdn) { + list_del(&window->list); + kfree(window); + break; + } + } + spin_unlock(&dma_win_list_lock); + } + + iommu_tce_table_put(table_group->tables[num]); + table_group->tables[num] = NULL; + + ret = 0; + + goto out_unlock; + +out_failed: + fpdn = kzalloc(sizeof(*fpdn), GFP_KERNEL); + if (!fpdn) + goto out_unlock; + fpdn->pdn = pdn; + list_add(&fpdn->list, &failed_ddw_pdn_list); + +out_unlock: + mutex_unlock(&dma_win_init_mutex); + + return ret; +} + +static long spapr_tce_take_ownership(struct iommu_table_group *table_group, struct device *dev) +{ + struct iommu_table *tbl = table_group->tables[0]; + struct pci_dev *pdev = to_pci_dev(dev); + struct device_node *dn = pci_device_to_OF_node(pdev); + struct device_node *pdn; + + /* SRIOV VFs using direct map by the host driver OR multifunction devices + * where the ownership was taken on the attempt by the first function + */ + if (!tbl && (table_group->max_dynamic_windows_supported != 1)) + return 0; + + mutex_lock(&dma_win_init_mutex); + + pdn = pci_dma_find(dn, NULL); + if (!pdn || !PCI_DN(pdn)) { /* Niether of 32s|64-bit exist! */ + dev_warn(&pdev->dev, "No dma-windows exist for the node %pOF\n", pdn); + mutex_unlock(&dma_win_init_mutex); + return -1; + } + + /* + * Though rtas call reset-pe removes the DDW, it doesn't clear the entries on the table + * if there are any. In case of direct map, the entries will be left over, which + * is fine for PEs with 2 DMA windows where the second window is created with create-pe + * at which point the table is cleared. However, on VFs having only one DMA window, the + * default window would end up seeing the entries left over from the direct map done + * on the second window. So, remove the ddw explicitly so that clean_dma_window() + * cleans up the entries if any. + */ + if (remove_dynamic_dma_windows(pdev, pdn)) { + dev_warn(&pdev->dev, "The existing DDW removal failed for node %pOF\n", pdn); + mutex_unlock(&dma_win_init_mutex); + return -1; + } + + /* The table_group->tables[0] is not null now, it must be the default window + * Remove it, let the userspace create it as it needs. + */ + if (table_group->tables[0]) { + remove_dma_window_named(pdn, true, "ibm,dma-window", true); + iommu_tce_table_put(tbl); + table_group->tables[0] = NULL; + } + set_iommu_table_base(dev, NULL); + + mutex_unlock(&dma_win_init_mutex); + + return 0; +} + +static void spapr_tce_release_ownership(struct iommu_table_group *table_group, struct device *dev) +{ + struct iommu_table *tbl = table_group->tables[0]; + + if (tbl) { /* Default window already restored */ + return; + } + + mutex_lock(&dma_win_init_mutex); + + /* Restore the default window */ + pseries_setup_default_iommu_config(table_group, dev); + + mutex_unlock(&dma_win_init_mutex); + + return; +} + +static struct iommu_table_group_ops spapr_tce_table_group_ops = { + .get_table_size = spapr_tce_get_table_size, + .create_table = spapr_tce_create_table, + .set_window = spapr_tce_set_window, + .unset_window = spapr_tce_unset_window, + .take_ownership = spapr_tce_take_ownership, + .release_ownership = spapr_tce_release_ownership, +}; +#endif + static int iommu_mem_notifier(struct notifier_block *nb, unsigned long action, void *data) { @@ -1747,8 +2397,8 @@ static int iommu_reconfig_notifier(struct notifier_block *nb, unsigned long acti * we have to remove the property when releasing * the device node. */ - if (remove_ddw(np, false, DIRECT64_PROPNAME)) - remove_ddw(np, false, DMA64_PROPNAME); + if (remove_dma_window_named(np, false, DIRECT64_PROPNAME, true)) + remove_dma_window_named(np, false, DMA64_PROPNAME, true); if (pci && pci->table_group) iommu_pseries_free_group(pci->table_group, diff --git a/arch/powerpc/platforms/pseries/papr_scm.c b/arch/powerpc/platforms/pseries/papr_scm.c index 9b6420eb3567d..f6a70bc92e835 100644 --- a/arch/powerpc/platforms/pseries/papr_scm.c +++ b/arch/powerpc/platforms/pseries/papr_scm.c @@ -1536,5 +1536,6 @@ static void __exit papr_scm_exit(void) module_exit(papr_scm_exit); MODULE_DEVICE_TABLE(of, papr_scm_match); +MODULE_DESCRIPTION("PAPR Storage Class Memory interface driver"); MODULE_LICENSE("GPL"); MODULE_AUTHOR("IBM Corporation"); diff --git a/arch/powerpc/sysdev/Kconfig b/arch/powerpc/sysdev/Kconfig index 5aa92ff3622d2..18ff2c4a814ad 100644 --- a/arch/powerpc/sysdev/Kconfig +++ b/arch/powerpc/sysdev/Kconfig @@ -5,12 +5,12 @@ config PPC4xx_PCI_EXPRESS bool - depends on PCI && 4xx + depends on PCI && 44x config PPC4xx_HSTA_MSI bool depends on PCI_MSI - depends on PCI && 4xx + depends on PCI && 44x config PPC_MSI_BITMAP bool diff --git a/arch/powerpc/sysdev/rtc_cmos_setup.c b/arch/powerpc/sysdev/rtc_cmos_setup.c index 47cc87bd6a336..9a232ae5e3607 100644 --- a/arch/powerpc/sysdev/rtc_cmos_setup.c +++ b/arch/powerpc/sysdev/rtc_cmos_setup.c @@ -66,4 +66,5 @@ static int __init add_rtc(void) } fs_initcall(add_rtc); +MODULE_DESCRIPTION("PPC RTC CMOS driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/macintosh/ams/ams-i2c.c b/drivers/macintosh/ams/ams-i2c.c index f9bfe84b1c735..d5cdbba6e7c75 100644 --- a/drivers/macintosh/ams/ams-i2c.c +++ b/drivers/macintosh/ams/ams-i2c.c @@ -60,7 +60,7 @@ static int ams_i2c_probe(struct i2c_client *client); static void ams_i2c_remove(struct i2c_client *client); static const struct i2c_device_id ams_id[] = { - { "MAC,accelerometer_1", 0 }, + { "MAC,accelerometer_1" }, { } }; MODULE_DEVICE_TABLE(i2c, ams_id); diff --git a/drivers/macintosh/mac_hid.c b/drivers/macintosh/mac_hid.c index 1ae3539beff52..b7b3ef1e58dce 100644 --- a/drivers/macintosh/mac_hid.c +++ b/drivers/macintosh/mac_hid.c @@ -16,6 +16,7 @@ #include #include +MODULE_DESCRIPTION("Mouse button 2+3 emulation"); MODULE_LICENSE("GPL"); static int mouse_emulate_buttons; diff --git a/drivers/macintosh/windfarm_ad7417_sensor.c b/drivers/macintosh/windfarm_ad7417_sensor.c index 49ce37fde9300..3ff4577ba847f 100644 --- a/drivers/macintosh/windfarm_ad7417_sensor.c +++ b/drivers/macintosh/windfarm_ad7417_sensor.c @@ -304,7 +304,7 @@ static void wf_ad7417_remove(struct i2c_client *client) } static const struct i2c_device_id wf_ad7417_id[] = { - { "MAC,ad7417", 0 }, + { "MAC,ad7417" }, { } }; MODULE_DEVICE_TABLE(i2c, wf_ad7417_id); diff --git a/drivers/macintosh/windfarm_fcu_controls.c b/drivers/macintosh/windfarm_fcu_controls.c index 603ef6c600ba8..82365f19adb46 100644 --- a/drivers/macintosh/windfarm_fcu_controls.c +++ b/drivers/macintosh/windfarm_fcu_controls.c @@ -573,7 +573,7 @@ static void wf_fcu_remove(struct i2c_client *client) } static const struct i2c_device_id wf_fcu_id[] = { - { "MAC,fcu", 0 }, + { "MAC,fcu" }, { } }; MODULE_DEVICE_TABLE(i2c, wf_fcu_id); diff --git a/drivers/macintosh/windfarm_lm87_sensor.c b/drivers/macintosh/windfarm_lm87_sensor.c index 975361c23a93a..16635e2b180b8 100644 --- a/drivers/macintosh/windfarm_lm87_sensor.c +++ b/drivers/macintosh/windfarm_lm87_sensor.c @@ -156,7 +156,7 @@ static void wf_lm87_remove(struct i2c_client *client) } static const struct i2c_device_id wf_lm87_id[] = { - { "MAC,lm87cimt", 0 }, + { "MAC,lm87cimt" }, { } }; MODULE_DEVICE_TABLE(i2c, wf_lm87_id); diff --git a/drivers/macintosh/windfarm_max6690_sensor.c b/drivers/macintosh/windfarm_max6690_sensor.c index 02856d1f03137..d734b31b8236f 100644 --- a/drivers/macintosh/windfarm_max6690_sensor.c +++ b/drivers/macintosh/windfarm_max6690_sensor.c @@ -112,7 +112,7 @@ static void wf_max6690_remove(struct i2c_client *client) } static const struct i2c_device_id wf_max6690_id[] = { - { "MAC,max6690", 0 }, + { "MAC,max6690" }, { } }; MODULE_DEVICE_TABLE(i2c, wf_max6690_id); diff --git a/drivers/macintosh/windfarm_smu_sat.c b/drivers/macintosh/windfarm_smu_sat.c index 50baa062c9dfb..ff8805ecf2e56 100644 --- a/drivers/macintosh/windfarm_smu_sat.c +++ b/drivers/macintosh/windfarm_smu_sat.c @@ -333,7 +333,7 @@ static void wf_sat_remove(struct i2c_client *client) } static const struct i2c_device_id wf_sat_id[] = { - { "MAC,smu-sat", 0 }, + { "MAC,smu-sat" }, { } }; MODULE_DEVICE_TABLE(i2c, wf_sat_id); diff --git a/drivers/vfio/vfio_iommu_spapr_tce.c b/drivers/vfio/vfio_iommu_spapr_tce.c index a94ec6225d31a..5f9e7e4770783 100644 --- a/drivers/vfio/vfio_iommu_spapr_tce.c +++ b/drivers/vfio/vfio_iommu_spapr_tce.c @@ -364,7 +364,6 @@ static void tce_iommu_release(void *iommu_data) if (!tbl) continue; - tce_iommu_clear(container, tbl, tbl->it_offset, tbl->it_size); tce_iommu_free_table(container, tbl); } @@ -720,6 +719,8 @@ static long tce_iommu_remove_window(struct tce_container *container, BUG_ON(!tbl->it_size); + tce_iommu_clear(container, tbl, tbl->it_offset, tbl->it_size); + /* Detach groups from IOMMUs */ list_for_each_entry(tcegrp, &container->group_list, next) { table_group = iommu_group_get_iommudata(tcegrp->grp); @@ -738,7 +739,6 @@ static long tce_iommu_remove_window(struct tce_container *container, } /* Free table */ - tce_iommu_clear(container, tbl, tbl->it_offset, tbl->it_size); tce_iommu_free_table(container, tbl); container->tables[num] = NULL; @@ -1197,9 +1197,14 @@ static void tce_iommu_release_ownership(struct tce_container *container, return; } - for (i = 0; i < IOMMU_TABLE_GROUP_MAX_TABLES; ++i) - if (container->tables[i]) + for (i = 0; i < IOMMU_TABLE_GROUP_MAX_TABLES; ++i) { + if (container->tables[i]) { + tce_iommu_clear(container, container->tables[i], + container->tables[i]->it_offset, + container->tables[i]->it_size); table_group->ops->unset_window(table_group, i); + } + } } static long tce_iommu_take_ownership(struct tce_container *container, diff --git a/scripts/head-object-list.txt b/scripts/head-object-list.txt index 890f69005bab4..fd5d00bac447d 100644 --- a/scripts/head-object-list.txt +++ b/scripts/head-object-list.txt @@ -27,7 +27,6 @@ arch/mips/kernel/head.o arch/nios2/kernel/head.o arch/openrisc/kernel/head.o arch/parisc/kernel/head.o -arch/powerpc/kernel/head_40x.o arch/powerpc/kernel/head_44x.o arch/powerpc/kernel/head_64.o arch/powerpc/kernel/head_8xx.o diff --git a/tools/testing/selftests/sigaltstack/current_stack_pointer.h b/tools/testing/selftests/sigaltstack/current_stack_pointer.h index ea9bdf3a90b16..09da8f1011ce4 100644 --- a/tools/testing/selftests/sigaltstack/current_stack_pointer.h +++ b/tools/testing/selftests/sigaltstack/current_stack_pointer.h @@ -8,7 +8,7 @@ register unsigned long sp asm("sp"); register unsigned long sp asm("esp"); #elif __loongarch64 register unsigned long sp asm("$sp"); -#elif __ppc__ +#elif __powerpc__ register unsigned long sp asm("r1"); #elif __s390x__ register unsigned long sp asm("%15");