This role installs and configures an NTP and/or PTP implementation to operate
as an NTP client and/or PTP slave in order to synchronize the system clock with
NTP servers and/or grandmasters in PTP domains. Supported NTP/PTP implementations are chrony, ntp (the reference implementation) and linuxptp.
The role replaces the configuration of the given or detected provider
service on the managed host. Previous settings will be lost, even if
they are not specified in the role variables (no attempt is made to
preserve or merge the previous settings, the configuration files are
replaced entirely). The only setting which is preserved is the choice
of provider if timesync_ntp_provider is not defined (see the
description of this variable below).
See below
In order to manage rpm-ostree systems, the role requires modules from external
collections. Use the following command to install them:
ansible-galaxy collection install -vv -r meta/collection-requirements.ymlThe variables that can be passed to this role are as follows:
# List of NTP servers
timesync_ntp_servers:
- hostname: foo.example.com # Hostname or address of the server
minpoll: 4 # Minimum polling interval (default 6)
maxpoll: 8 # Maximum polling interval (default 10)
iburst: true # Flag enabling fast initial synchronization
# (default false)
pool: false # Flag indicating that each resolved address
# of the hostname is a separate NTP server
# (default false)
nts: false # Flag enabling Network Time Security (NTS)
# authentication mechanism (default false,
# supported only with chrony >= 4.0)
prefer: false # Flag marking the source to be preferred for
# synchronization over other sources
# (default false)
trust: false # Flag marking the source to be trusted over
# sources that don't have this flag
# (default false)
xleave: false # Flag enabling interleaved mode (default false)
filter: 1 # Number of NTP measurements per clock update
# (default 1)
# List of PTP domains
timesync_ptp_domains:
- number: 0 # PTP domain number
interfaces: [eth0] # List of interfaces in the domain
delay: 0.000010 # Assumed maximum network delay to the
# grandmaster in seconds # wokeignore:rule=master
# (default 100 microsecond)
transport: UDPv4 # Network transport: UDPv4, UDPv6, L2
# (default UDPv4)
udp_ttl: 1 # TTL for UDPv4 and UDPv6 transports
# (default 1)
hybrid_e2e: false # Flag enabling unicast end-to-end delay
# requests (default false)
# Flag enabling use of NTP servers provided by DHCP (default false)
timesync_dhcp_ntp_servers: false
# Minimum offset of the clock which can be corrected by stepping (default is
# specific to NTP/PTP implementation: chrony 1.0, ntp 0.128, linuxptp 0.00002).
# Zero threshold disables all steps.
timesync_step_threshold: 1.0
# Maximum root distance to accept measurements from NTP servers
# Set to 0 to use provider default
timesync_max_distance: 0
# Minimum number of selectable time sources required to allow synchronization
# of the clock (default 1)
timesync_min_sources: 1
# List of interfaces which should have hardware timestamping enabled for NTP
# (default empty list). As a special value, '*' enables the timestamping on all
# interfaces that support it.
timesync_ntp_hwts_interfaces: ["*"]
# Name of the package which should be installed and configured for NTP.
# Possible values are "chrony" and "ntp". If not defined, the currently active
# or enabled service will be configured. If no service is active or enabled, a
# package specific to the system and its version will be selected.
timesync_ntp_provider: chrony
# Sometimes administrators might need extended configurations for chrony which
# are not covered by the predefined settings provided by this role.
# 'timesync_chrony_custom_settings' allows to define a list of custom settings
# for the chrony.conf file, by providing a list of settings. As an example,
# for debugging, one might need to log mesurements, statistics and tracking.
# This information is usually stored in the /var/log/chrony directory. For
# that, one needs to define two different settings (logdir and log), as
# follows:
timesync_chrony_custom_settings:
- "logdir /var/log/chrony"
- "log measurements statistics tracking"
# This variable is applicable only for transactional update systems.
# If a transactional update requires a reboot, the role will proceed with the
# reboot if `timesync_transactional_update_reboot_ok` is set to `true`. If set
# to `false`, the role will notify the user that a reboot is required, allowing
# for custom handling of the reboot requirement. If this variable is not set,
# the role will fail to ensure the reboot requirement is not overlooked.
# For non-transactional update systems, this variable is ignored.
timesync_transactional_update_reboot_ok: trueInstall and configure ntp to synchronize the system clock with three NTP servers:
- name: Manage timesync with 3 servers
hosts: targets
vars:
timesync_ntp_servers:
- hostname: foo.example.com
iburst: true
- hostname: bar.example.com
iburst: true
- hostname: baz.example.com
iburst: true
roles:
- linux-system-roles.timesyncInstall and configure linuxptp to synchronize the system clock with a
grandmaster in PTP domain number 0, which is accessible on interface eth0:
- name: Manage timesync in PTP domain 0, interface eth0
hosts: targets
vars:
timesync_ptp_domains:
- number: 0
interfaces: [eth0]
roles:
- linux-system-roles.timesyncInstall and configure chrony and linuxptp to synchronize the system clock with multiple NTP servers and PTP domains for a highly accurate and resilient synchronization:
- name: Manage multiple NTP servers and PTP domains
hosts: targets
vars:
timesync_ntp_servers:
- hostname: foo.example.com
maxpoll: 6
- hostname: bar.example.com
maxpoll: 6
- hostname: baz.example.com
maxpoll: 6
timesync_ptp_domains:
- number: 0
interfaces: [eth0, eth1]
transport: L2
delay: 0.000010
- number: 1
interfaces: [eth2]
transport: UDPv4
delay: 0.000010
roles:
- linux-system-roles.timesyncInstall and configure chrony with multiple NTP servers and custom advanced
settings: log measurements, statistics and tracking
into /var/log/chrony:
- name: Manage with custom advanced settings
hosts: targets
vars:
timesync_ntp_servers:
- hostname: foo.example.com
- hostname: bar.example.com
- hostname: baz.example.com
timesync_chrony_custom_settings:
- "logdir /var/log/chrony"
- "log measurements statistics tracking"
roles:
- linux-system-roles.timesyncSee README-ostree.md