安装日志 #5
Comments
|
--------接上------------ debconf: delaying package configuration, since apt-utils is not installed W: --force-yes is deprecated, use one of the options starting with --allow instead. W: --force-yes is deprecated, use one of the options starting with --allow instead. E: Package 'python-pip' has no installation candidate Pillow-3.2.0.zip 100%[===================>] 10.04M 466KB/s in 49s 2024-03-23 10:59:19 (209 KB/s) - ‘Pillow-3.2.0.zip’ saved [10529195/10529195] Archive: Pillow-3.2.0.zip
|
纯净debian系统，安装出现很多错误，最后也没打印用户名密码给我
root@4G-wifi:~# wget --no-check-certificate -qO crack_bt_panel_pro.sh https://raw.githubusercontent.com/leitbogioro/Crack_BT_Panel/master/crack_bt_panel_pro.sh && bash crack_bt_panel_pro.sh
欢迎安装宝塔面板Pro破解版！
[警告]
本程序系个人制作，具备宝塔面板5.9专业版的所有功能
如有侵权，请联系作者在第一时间处理
安装并试用后，请在24小时内卸载
[说明]
本脚本必须在完全干净的 CentOS/Debian/Ubuntu 系统上安装
如已安装更高版本的宝塔面板，请先卸载高版本再安装
如已安装其他种类的面板，或 LNMP 之类的运行环境、一键包，建议备份好数据，重装干净系统再安装
使用本脚本出现的任何不良后果，本人概不负责
[支持]
zhihu: https://www.zhihu.com/people/deepdarkfantastic
email: [email protected]
确定要安装吗？(y/n): y
crack_bt_panel_pro.sh:行61: rpm：未找到命令
cat: /etc/redhat-release: 没有那个文件或目录
命中:1 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye InRelease
命中:2 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye-updates InRelease
命中:3 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye-backports InRelease
命中:4 https://mirrors.tuna.tsinghua.edu.cn/debian-security bullseye-security InRelease
正在读取软件包列表... 完成
正在读取软件包列表... 完成
正在分析软件包的依赖关系树... 完成
正在读取状态信息... 完成
ca-certificates 已经是最新版 (20210119)。
ca-certificates 已设置为手动安装。
下列软件包是自动安装的并且现在不需要了：
cpio initramfs-tools initramfs-tools-core klibc-utils libklibc linux-base
使用'apt autoremove'来卸载它(它们)。
升级了 0 个软件包，新安装了 0 个软件包，要卸载 0 个软件包，有 0 个软件包未被升级。
正在读取软件包列表... 完成
正在分析软件包的依赖关系树... 完成
正在读取状态信息... 完成
没有可用的软件包 vim-gnome，但是它被其它的软件包引用了。
这可能意味着这个缺失的软件包可能已被废弃，
或者只能在其他发布源中找到
E: 软件包 vim-gnome 没有可安装候选
E: 软件包 vim-gnome 没有可安装候选
--2024-03-23 10:41:21-- https://git.io/fj0z5
正在连接 192.168.1.7:7890... 已连接。
已发出 Proxy 请求，正在等待回应... 301 Moved Permanently
位置：https://raw.githubusercontent.com/leitbogioro/Crack_BT_Panel/master/install-ubuntu.sh [跟随至新的 URL]
--2024-03-23 10:41:24-- https://raw.githubusercontent.com/leitbogioro/Crack_BT_Panel/master/install-ubuntu.sh
正在连接 192.168.1.7:7890... 已连接。
已发出 Proxy 请求，正在等待回应... 200 OK
长度：14865 (15K) [text/plain]
正在保存至: “install.sh”
install.sh 100%[===================>] 14.52K 37.9KB/s 用时 0.4s
2024-03-23 10:41:25 (37.9 KB/s) - 已保存 “install.sh” [14865/14865])
+----------------------------------------------------------------------
| Bt-WebPanel 5.x FOR Ubuntu/Debian
+----------------------------------------------------------------------
| Copyright © 2015-2018 BT-SOFT(http://www.bt.cn) All rights reserved.
+----------------------------------------------------------------------
| The WebPanel URL will be http://SERVER_IP:8888 when installed.
+----------------------------------------------------------------------
| This script modified by leitbogioro.
+----------------------------------------------------------------------
Selected download node...
install.sh: line 66: [: =: unary operator expected
curl: (28) Operation timed out after 60002 milliseconds with 0 bytes received
install.sh: line 66: [: =: unary operator expected
Download node: http://download.bt.cn
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
The following packages were automatically installed and are no longer required:
cpio initramfs-tools initramfs-tools-core klibc-utils libklibc linux-base
Use 'apt autoremove' to remove them.
The following additional packages will be installed:
fonts-lato javascript-common libgdbm-compat4 libgdbm6 libjs-jquery
libruby2.7 libyaml-0-2 rake ruby-minitest ruby-net-telnet ruby-power-assert
ruby-rubygems ruby-test-unit ruby-xmlrpc ruby2.7 rubygems-integration unzip
zip
Suggested packages:
apache2 | lighttpd | httpd gdbm-l10n ri ruby-dev bundler
The following NEW packages will be installed:
fonts-lato javascript-common libgdbm-compat4 libgdbm6 libjs-jquery
libruby2.7 libyaml-0-2 rake ruby ruby-minitest ruby-net-telnet
ruby-power-assert ruby-rubygems ruby-test-unit ruby-xmlrpc ruby2.7
rubygems-integration unzip zip
0 upgraded, 19 newly installed, 0 to remove and 0 not upgraded.
Need to get 8,920 kB of archives.
After this operation, 34.6 MB of additional disk space will be used.
Get:1 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 fonts-lato all 2.0-2.1 [2,696 kB]
Get:2 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 javascript-common all 11+nmu1 [6,260 B]
Get:3 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libgdbm6 arm64 1.19-2 [64.0 kB]
Get:4 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libgdbm-compat4 arm64 1.19-2 [44.6 kB]
Get:5 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libjs-jquery all 3.5.1+dfsg+~3.5.5-7 [315 kB]
Get:6 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 rubygems-integration all 1.18 [6,704 B]
Get:7 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 ruby2.7 arm64 2.7.4-1+deb11u1 [747 kB]
Get:8 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 ruby-rubygems all 3.2.5-2 [281 kB]
Get:9 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 ruby arm64 1:2.7+2 [11.7 kB]
Get:10 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 rake all 13.0.3-1 [84.7 kB]
Get:11 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 ruby-minitest all 5.13.0-1 [57.3 kB]
Get:12 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 ruby-net-telnet all 0.1.1-2 [12.5 kB]
Get:13 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 ruby-power-assert all 1.1.7-2 [11.5 kB]
Get:14 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 ruby-test-unit all 3.3.9-1 [86.1 kB]
Get:15 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 ruby-xmlrpc all 0.3.0-2 [23.7 kB]
Get:16 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libyaml-0-2 arm64 0.2.2-1 [45.1 kB]
Get:17 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libruby2.7 arm64 2.7.4-1+deb11u1 [4,034 kB]
Get:18 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 unzip arm64 6.0-26+deb11u1 [165 kB]
Get:19 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 zip arm64 3.0-12 [228 kB]
Fetched 8,920 kB in 56s (160 kB/s)
debconf: delaying package configuration, since apt-utils is not installed
Selecting previously unselected package fonts-lato.
(Reading database ... 21486 files and directories currently installed.)
Preparing to unpack .../00-fonts-lato_2.0-2.1_all.deb ...
Unpacking fonts-lato (2.0-2.1) ...
Selecting previously unselected package javascript-common.
Preparing to unpack .../01-javascript-common_11+nmu1_all.deb ...
Unpacking javascript-common (11+nmu1) ...
Selecting previously unselected package libgdbm6:arm64.
Preparing to unpack .../02-libgdbm6_1.19-2_arm64.deb ...
Unpacking libgdbm6:arm64 (1.19-2) ...
Selecting previously unselected package libgdbm-compat4:arm64.
Preparing to unpack .../03-libgdbm-compat4_1.19-2_arm64.deb ...
Unpacking libgdbm-compat4:arm64 (1.19-2) ...
Selecting previously unselected package libjs-jquery.
Preparing to unpack .../04-libjs-jquery_3.5.1+dfsg+~3.5.5-7_all.deb ...
Unpacking libjs-jquery (3.5.1+dfsg+~3.5.5-7) ...
Selecting previously unselected package rubygems-integration.
Preparing to unpack .../05-rubygems-integration_1.18_all.deb ...
Unpacking rubygems-integration (1.18) ...
Selecting previously unselected package ruby2.7.
Preparing to unpack .../06-ruby2.7_2.7.4-1+deb11u1_arm64.deb ...
Unpacking ruby2.7 (2.7.4-1+deb11u1) ...
Selecting previously unselected package ruby-rubygems.
Preparing to unpack .../07-ruby-rubygems_3.2.5-2_all.deb ...
Unpacking ruby-rubygems (3.2.5-2) ...
Selecting previously unselected package ruby.
Preparing to unpack .../08-ruby_1%3a2.7+2_arm64.deb ...
Unpacking ruby (1:2.7+2) ...
Selecting previously unselected package rake.
Preparing to unpack .../09-rake_13.0.3-1_all.deb ...
Unpacking rake (13.0.3-1) ...
Selecting previously unselected package ruby-minitest.
Preparing to unpack .../10-ruby-minitest_5.13.0-1_all.deb ...
Unpacking ruby-minitest (5.13.0-1) ...
Selecting previously unselected package ruby-net-telnet.
Preparing to unpack .../11-ruby-net-telnet_0.1.1-2_all.deb ...
Unpacking ruby-net-telnet (0.1.1-2) ...
Selecting previously unselected package ruby-power-assert.
Preparing to unpack .../12-ruby-power-assert_1.1.7-2_all.deb ...
Unpacking ruby-power-assert (1.1.7-2) ...
Selecting previously unselected package ruby-test-unit.
Preparing to unpack .../13-ruby-test-unit_3.3.9-1_all.deb ...
Unpacking ruby-test-unit (3.3.9-1) ...
Selecting previously unselected package ruby-xmlrpc.
Preparing to unpack .../14-ruby-xmlrpc_0.3.0-2_all.deb ...
Unpacking ruby-xmlrpc (0.3.0-2) ...
Selecting previously unselected package libyaml-0-2:arm64.
Preparing to unpack .../15-libyaml-0-2_0.2.2-1_arm64.deb ...
Unpacking libyaml-0-2:arm64 (0.2.2-1) ...
Selecting previously unselected package libruby2.7:arm64.
Preparing to unpack .../16-libruby2.7_2.7.4-1+deb11u1_arm64.deb ...
Unpacking libruby2.7:arm64 (2.7.4-1+deb11u1) ...
Selecting previously unselected package unzip.
Preparing to unpack .../17-unzip_6.0-26+deb11u1_arm64.deb ...
Unpacking unzip (6.0-26+deb11u1) ...
Selecting previously unselected package zip.
Preparing to unpack .../18-zip_3.0-12_arm64.deb ...
Unpacking zip (3.0-12) ...
Setting up javascript-common (11+nmu1) ...
Setting up fonts-lato (2.0-2.1) ...
Setting up ruby-power-assert (1.1.7-2) ...
Setting up libyaml-0-2:arm64 (0.2.2-1) ...
Setting up unzip (6.0-26+deb11u1) ...
Setting up rubygems-integration (1.18) ...
Setting up ruby-minitest (5.13.0-1) ...
Setting up zip (3.0-12) ...
Setting up ruby-test-unit (3.3.9-1) ...
Setting up ruby-net-telnet (0.1.1-2) ...
Setting up libjs-jquery (3.5.1+dfsg+~3.5.5-7) ...
Setting up ruby-xmlrpc (0.3.0-2) ...
Setting up libgdbm6:arm64 (1.19-2) ...
Setting up libgdbm-compat4:arm64 (1.19-2) ...
Setting up ruby2.7 (2.7.4-1+deb11u1) ...
Setting up ruby-rubygems (3.2.5-2) ...
Setting up ruby (1:2.7+2) ...
Setting up rake (13.0.3-1) ...
Setting up libruby2.7:arm64 (2.7.4-1+deb11u1) ...
Processing triggers for libc-bin (2.31-13+deb11u8) ...
ldconfig: /lib/libusbgx.so.2 is not a symbolic link
Hit:1 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye InRelease
Hit:2 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye-updates InRelease
Hit:3 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye-backports InRelease
Hit:4 https://mirrors.tuna.tsinghua.edu.cn/debian-security bullseye-security InRelease
Reading package lists... Done
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
The following packages were automatically installed and are no longer required:
cpio initramfs-tools initramfs-tools-core klibc-utils libklibc linux-base
Use 'apt autoremove' to remove them.
The following additional packages will be installed:
distro-info-data libmpdec3 libpython3-stdlib libpython3.9-minimal
libpython3.9-stdlib media-types python3 python3-minimal python3.9
python3.9-minimal
Suggested packages:
python3-doc python3-tk python3-venv python3.9-venv python3.9-doc binutils
binfmt-support
The following NEW packages will be installed:
distro-info-data libmpdec3 libpython3-stdlib libpython3.9-minimal
libpython3.9-stdlib lsb-release media-types python3 python3-minimal
python3.9 python3.9-minimal
0 upgraded, 11 newly installed, 0 to remove and 0 not upgraded.
Need to get 5,053 kB of archives.
After this operation, 19.6 MB of additional disk space will be used.
Get:1 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libpython3.9-minimal arm64 3.9.2-1 [797 kB]
Get:2 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 python3.9-minimal arm64 3.9.2-1 [1,884 kB]
Get:3 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 python3-minimal arm64 3.9.2-3 [38.2 kB]
Get:4 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 media-types all 4.0.0 [30.3 kB]
Get:5 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libmpdec3 arm64 2.5.1-1 [84.4 kB]
Get:6 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libpython3.9-stdlib arm64 3.9.2-1 [1,658 kB]
Get:7 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 python3.9 arm64 3.9.2-1 [466 kB]
Get:8 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libpython3-stdlib arm64 3.9.2-3 [21.4 kB]
Get:9 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 python3 arm64 3.9.2-3 [37.9 kB]
Get:10 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 distro-info-data all 0.51+deb11u5 [8,244 B]
Get:11 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 lsb-release all 11.1.0 [27.9 kB]
Fetched 5,053 kB in 23s (224 kB/s)
debconf: delaying package configuration, since apt-utils is not installed
Selecting previously unselected package libpython3.9-minimal:arm64.
(Reading database ... 23579 files and directories currently installed.)
Preparing to unpack .../libpython3.9-minimal_3.9.2-1_arm64.deb ...
Unpacking libpython3.9-minimal:arm64 (3.9.2-1) ...
Selecting previously unselected package python3.9-minimal.
Preparing to unpack .../python3.9-minimal_3.9.2-1_arm64.deb ...
Unpacking python3.9-minimal (3.9.2-1) ...
Setting up libpython3.9-minimal:arm64 (3.9.2-1) ...
Setting up python3.9-minimal (3.9.2-1) ...
Selecting previously unselected package python3-minimal.
(Reading database ... 23862 files and directories currently installed.)
Preparing to unpack .../0-python3-minimal_3.9.2-3_arm64.deb ...
Unpacking python3-minimal (3.9.2-3) ...
Selecting previously unselected package media-types.
Preparing to unpack .../1-media-types_4.0.0_all.deb ...
Unpacking media-types (4.0.0) ...
Selecting previously unselected package libmpdec3:arm64.
Preparing to unpack .../2-libmpdec3_2.5.1-1_arm64.deb ...
Unpacking libmpdec3:arm64 (2.5.1-1) ...
Selecting previously unselected package libpython3.9-stdlib:arm64.
Preparing to unpack .../3-libpython3.9-stdlib_3.9.2-1_arm64.deb ...
Unpacking libpython3.9-stdlib:arm64 (3.9.2-1) ...
Selecting previously unselected package python3.9.
Preparing to unpack .../4-python3.9_3.9.2-1_arm64.deb ...
Unpacking python3.9 (3.9.2-1) ...
Selecting previously unselected package libpython3-stdlib:arm64.
Preparing to unpack .../5-libpython3-stdlib_3.9.2-3_arm64.deb ...
Unpacking libpython3-stdlib:arm64 (3.9.2-3) ...
Setting up python3-minimal (3.9.2-3) ...
Selecting previously unselected package python3.
(Reading database ... 24257 files and directories currently installed.)
Preparing to unpack .../python3_3.9.2-3_arm64.deb ...
Unpacking python3 (3.9.2-3) ...
Selecting previously unselected package distro-info-data.
Preparing to unpack .../distro-info-data_0.51+deb11u5_all.deb ...
Unpacking distro-info-data (0.51+deb11u5) ...
Selecting previously unselected package lsb-release.
Preparing to unpack .../lsb-release_11.1.0_all.deb ...
Unpacking lsb-release (11.1.0) ...
Setting up media-types (4.0.0) ...
Setting up distro-info-data (0.51+deb11u5) ...
Setting up libmpdec3:arm64 (2.5.1-1) ...
Setting up libpython3.9-stdlib:arm64 (3.9.2-1) ...
Setting up libpython3-stdlib:arm64 (3.9.2-3) ...
Setting up python3.9 (3.9.2-1) ...
Setting up python3 (3.9.2-3) ...
running python rtupdate hooks for python3.9...
running python post-rtupdate hooks for python3.9...
Setting up lsb-release (11.1.0) ...
Processing triggers for libc-bin (2.31-13+deb11u8) ...
ldconfig: /lib/libusbgx.so.2 is not a symbolic link
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
wget is already the newest version (1.21-1+deb11u1).
The following packages were automatically installed and are no longer required:
cpio initramfs-tools initramfs-tools-core klibc-utils libklibc linux-base
Use 'apt autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
W: --force-yes is deprecated, use one of the options starting with --allow instead.
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
curl is already the newest version (7.74.0-1.3+deb11u11).
The following packages were automatically installed and are no longer required:
cpio initramfs-tools initramfs-tools-core klibc-utils libklibc linux-base
Use 'apt autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
W: --force-yes is deprecated, use one of the options starting with --allow instead.
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
Note, selecting 'python-is-python2' instead of 'python'
The following packages were automatically installed and are no longer required:
cpio initramfs-tools initramfs-tools-core klibc-utils libklibc linux-base
Use 'apt autoremove' to remove them.
The following additional packages will be installed:
bzip2 file libmagic-mgc libmagic1 libperl5.32 libpython2-stdlib
libpython2.7-minimal libpython2.7-stdlib mailcap mime-support perl
perl-modules-5.32 python2 python2-minimal python2.7 python2.7-minimal
xz-utils
Suggested packages:
bzip2-doc perl-doc libterm-readline-gnu-perl | libterm-readline-perl-perl
make libtap-harness-archive-perl python2-doc python-tk python2.7-doc
binutils binfmt-support
The following NEW packages will be installed:
bzip2 file libmagic-mgc libmagic1 libperl5.32 libpython2-stdlib
libpython2.7-minimal libpython2.7-stdlib mailcap mime-support perl
perl-modules-5.32 python-is-python2 python2 python2-minimal python2.7
python2.7-minimal xz-utils
0 upgraded, 18 newly installed, 0 to remove and 0 not upgraded.
Need to get 11.7 MB of archives.
After this operation, 70.5 MB of additional disk space will be used.
Get:1 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 perl-modules-5.32 all 5.32.1-4+deb11u3 [2,823 kB]
Get:2 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libperl5.32 arm64 5.32.1-4+deb11u3 [3,949 kB]
Get:3 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 perl arm64 5.32.1-4+deb11u3 [293 kB]
Get:4 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libpython2.7-minimal arm64 2.7.18-8+deb11u1 [397 kB]
Get:5 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 python2.7-minimal arm64 2.7.18-8+deb11u1 [1,196 kB]
Get:6 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 python2-minimal arm64 2.7.18-3 [34.2 kB]
Get:7 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 mailcap all 3.69 [31.7 kB]
Get:8 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 mime-support all 3.66 [10.9 kB]
Get:9 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libpython2.7-stdlib arm64 2.7.18-8+deb11u1 [1,844 kB]
Get:10 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 python2.7 arm64 2.7.18-8+deb11u1 [311 kB]
Get:11 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libpython2-stdlib arm64 2.7.18-3 [21.2 kB]
Get:12 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 python2 arm64 2.7.18-3 [24.5 kB]
Get:13 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 bzip2 arm64 1.0.8-4 [48.4 kB]
Get:14 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libmagic-mgc arm64 1:5.39-3+deb11u1 [273 kB]
Get:15 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libmagic1 arm64 1:5.39-3+deb11u1 [123 kB]
Get:16 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 file arm64 1:5.39-3+deb11u1 [69.2 kB]
Get:17 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 xz-utils arm64 5.2.5-2.1
deb11u1 [219 kB]deb11u1_arm64.deb ...Get:18 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 python-is-python2 all 2.7.18-9 [2,940 B]
Fetched 11.7 MB in 42s (276 kB/s)
debconf: delaying package configuration, since apt-utils is not installed
Selecting previously unselected package perl-modules-5.32.
(Reading database ... 24297 files and directories currently installed.)
Preparing to unpack .../00-perl-modules-5.32_5.32.1-4+deb11u3_all.deb ...
Unpacking perl-modules-5.32 (5.32.1-4+deb11u3) ...
Selecting previously unselected package libperl5.32:arm64.
Preparing to unpack .../01-libperl5.32_5.32.1-4+deb11u3_arm64.deb ...
Unpacking libperl5.32:arm64 (5.32.1-4+deb11u3) ...
Selecting previously unselected package perl.
Preparing to unpack .../02-perl_5.32.1-4+deb11u3_arm64.deb ...
Unpacking perl (5.32.1-4+deb11u3) ...
Selecting previously unselected package libpython2.7-minimal:arm64.
Preparing to unpack .../03-libpython2.7-minimal_2.7.18-8+deb11u1_arm64.deb ...
Unpacking libpython2.7-minimal:arm64 (2.7.18-8+deb11u1) ...
Selecting previously unselected package python2.7-minimal.
Preparing to unpack .../04-python2.7-minimal_2.7.18-8+deb11u1_arm64.deb ...
Unpacking python2.7-minimal (2.7.18-8+deb11u1) ...
Selecting previously unselected package python2-minimal.
Preparing to unpack .../05-python2-minimal_2.7.18-3_arm64.deb ...
Unpacking python2-minimal (2.7.18-3) ...
Selecting previously unselected package mailcap.
Preparing to unpack .../06-mailcap_3.69_all.deb ...
Unpacking mailcap (3.69) ...
Selecting previously unselected package mime-support.
Preparing to unpack .../07-mime-support_3.66_all.deb ...
Unpacking mime-support (3.66) ...
Selecting previously unselected package libpython2.7-stdlib:arm64.
Preparing to unpack .../08-libpython2.7-stdlib_2.7.18-8+deb11u1_arm64.deb ...
Unpacking libpython2.7-stdlib:arm64 (2.7.18-8+deb11u1) ...
Selecting previously unselected package python2.7.
Preparing to unpack .../09-python2.7_2.7.18-8+deb11u1_arm64.deb ...
Unpacking python2.7 (2.7.18-8+deb11u1) ...
Selecting previously unselected package libpython2-stdlib:arm64.
Preparing to unpack .../10-libpython2-stdlib_2.7.18-3_arm64.deb ...
Unpacking libpython2-stdlib:arm64 (2.7.18-3) ...
Setting up libpython2.7-minimal:arm64 (2.7.18-8+deb11u1) ...
Setting up python2.7-minimal (2.7.18-8+deb11u1) ...
Linking and byte-compiling packages for runtime python2.7...
Setting up python2-minimal (2.7.18-3) ...
Selecting previously unselected package python2.
(Reading database ... 27031 files and directories currently installed.)
Preparing to unpack .../0-python2_2.7.18-3_arm64.deb ...
Unpacking python2 (2.7.18-3) ...
Selecting previously unselected package bzip2.
Preparing to unpack .../1-bzip2_1.0.8-4_arm64.deb ...
Unpacking bzip2 (1.0.8-4) ...
Selecting previously unselected package libmagic-mgc.
Preparing to unpack .../2-libmagic-mgc_1%3a5.39-3+deb11u1_arm64.deb ...
Unpacking libmagic-mgc (1:5.39-3+deb11u1) ...
Selecting previously unselected package libmagic1:arm64.
Preparing to unpack .../3-libmagic1_1%3a5.39-3+deb11u1_arm64.deb ...
Unpacking libmagic1:arm64 (1:5.39-3+deb11u1) ...
Selecting previously unselected package file.
Preparing to unpack .../4-file_1%3a5.39-3+deb11u1_arm64.deb ...
Unpacking file (1:5.39-3+deb11u1) ...
Selecting previously unselected package xz-utils.
Preparing to unpack .../5-xz-utils_5.2.5-2.1
Unpacking xz-utils (5.2.5-2.1
deb11u1) ...deb11u1) ...Selecting previously unselected package python-is-python2.
Preparing to unpack .../6-python-is-python2_2.7.18-9_all.deb ...
Unpacking python-is-python2 (2.7.18-9) ...
Setting up libmagic-mgc (1:5.39-3+deb11u1) ...
Setting up perl-modules-5.32 (5.32.1-4+deb11u3) ...
Setting up libmagic1:arm64 (1:5.39-3+deb11u1) ...
Setting up file (1:5.39-3+deb11u1) ...
Setting up bzip2 (1.0.8-4) ...
Setting up xz-utils (5.2.5-2.1
update-alternatives: using /usr/bin/xz to provide /usr/bin/lzma (lzma) in auto mode
Setting up libperl5.32:arm64 (5.32.1-4+deb11u3) ...
Setting up perl (5.32.1-4+deb11u3) ...
Setting up mailcap (3.69) ...
Setting up mime-support (3.66) ...
Setting up libpython2.7-stdlib:arm64 (2.7.18-8+deb11u1) ...
Setting up python2.7 (2.7.18-8+deb11u1) ...
Setting up libpython2-stdlib:arm64 (2.7.18-3) ...
Setting up python2 (2.7.18-3) ...
Setting up python-is-python2 (2.7.18-9) ...
Processing triggers for libc-bin (2.31-13+deb11u8) ...
ldconfig: /lib/libusbgx.so.2 is not a symbolic link
W: --force-yes is deprecated, use one of the options starting with --allow instead.
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
Note, selecting 'python-dev-is-python2' instead of 'python-dev'
The following packages were automatically installed and are no longer required:
cpio initramfs-tools initramfs-tools-core klibc-utils libklibc linux-base
Use 'apt autoremove' to remove them.
The following additional packages will be installed:
fontconfig-config fonts-dejavu-core libc-dev-bin libc-devtools libc6-dev
libcrypt-dev libexpat1-dev libfontconfig1 libgd3 libnsl-dev libpython2-dev
libpython2.7 libpython2.7-dev libtirpc-dev libxpm4 linux-libc-dev manpages
manpages-dev python2-dev python2.7-dev
Suggested packages:
glibc-doc libgd-tools man-browser
The following NEW packages will be installed:
fontconfig-config fonts-dejavu-core libc-dev-bin libc-devtools libc6-dev
libcrypt-dev libexpat1-dev libfontconfig1 libgd3 libnsl-dev libpython2-dev
libpython2.7 libpython2.7-dev libtirpc-dev libxpm4 linux-libc-dev manpages
manpages-dev python-dev-is-python2 python2-dev python2.7-dev
0 upgraded, 21 newly installed, 0 to remove and 0 not upgraded.
Need to get 13.8 MB of archives.
After this operation, 47.9 MB of additional disk space will be used.
Get:1 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 manpages all 5.10-1 [1,412 kB]
Get:2 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 fonts-dejavu-core all 2.37-2 [1,069 kB]
Get:3 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 fontconfig-config all 2.13.1-4.2 [281 kB]
Get:4 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libc-dev-bin arm64 2.31-13+deb11u8 [273 kB]
Get:5 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libfontconfig1 arm64 2.13.1-4.2 [344 kB]
Get:6 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libxpm4 arm64 1:3.5.12-1.1+deb11u1 [47.4 kB]
Get:7 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libgd3 arm64 2.3.0-2 [127 kB]
Get:8 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libc-devtools arm64 2.31-13+deb11u8 [245 kB]
Get:9 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 linux-libc-dev arm64 5.10.209-2 [1,679 kB]
Get:10 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libcrypt-dev arm64 1:4.4.18-4 [108 kB]
Get:11 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libtirpc-dev arm64 1.3.1-1+deb11u1 [193 kB]
Get:12 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libnsl-dev arm64 1.3.0-2 [66.1 kB]
Get:13 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libc6-dev arm64 2.31-13+deb11u8 [2,029 kB]
Get:14 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libexpat1-dev arm64 2.2.10-2+deb11u5 [128 kB]
Get:15 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libpython2.7 arm64 2.7.18-8+deb11u1 [947 kB]
Get:16 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libpython2.7-dev arm64 2.7.18-8+deb11u1 [2,238 kB]
Get:17 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libpython2-dev arm64 2.7.18-3 [21.3 kB]
Get:18 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 manpages-dev all 5.10-1 [2,309 kB]
Get:19 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 python2.7-dev arm64 2.7.18-8+deb11u1 [292 kB]
Get:20 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 python2-dev arm64 2.7.18-3 [1,216 B]
Get:21 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 python-dev-is-python2 all 2.7.18-9 [1,528 B]
Fetched 13.8 MB in 53s (259 kB/s)
debconf: delaying package configuration, since apt-utils is not installed
Selecting previously unselected package manpages.
(Reading database ... 27166 files and directories currently installed.)
Preparing to unpack .../00-manpages_5.10-1_all.deb ...
Unpacking manpages (5.10-1) ...
Selecting previously unselected package fonts-dejavu-core.
Preparing to unpack .../01-fonts-dejavu-core_2.37-2_all.deb ...
Unpacking fonts-dejavu-core (2.37-2) ...
Selecting previously unselected package fontconfig-config.
Preparing to unpack .../02-fontconfig-config_2.13.1-4.2_all.deb ...
Unpacking fontconfig-config (2.13.1-4.2) ...
Selecting previously unselected package libc-dev-bin.
Preparing to unpack .../03-libc-dev-bin_2.31-13+deb11u8_arm64.deb ...
Unpacking libc-dev-bin (2.31-13+deb11u8) ...
Selecting previously unselected package libfontconfig1:arm64.
Preparing to unpack .../04-libfontconfig1_2.13.1-4.2_arm64.deb ...
Unpacking libfontconfig1:arm64 (2.13.1-4.2) ...
Selecting previously unselected package libxpm4:arm64.
Preparing to unpack .../05-libxpm4_1%3a3.5.12-1.1+deb11u1_arm64.deb ...
Unpacking libxpm4:arm64 (1:3.5.12-1.1+deb11u1) ...
Selecting previously unselected package libgd3:arm64.
Preparing to unpack .../06-libgd3_2.3.0-2_arm64.deb ...
Unpacking libgd3:arm64 (2.3.0-2) ...
Selecting previously unselected package libc-devtools.
Preparing to unpack .../07-libc-devtools_2.31-13+deb11u8_arm64.deb ...
Unpacking libc-devtools (2.31-13+deb11u8) ...
Selecting previously unselected package linux-libc-dev:arm64.
Preparing to unpack .../08-linux-libc-dev_5.10.209-2_arm64.deb ...
Unpacking linux-libc-dev:arm64 (5.10.209-2) ...
Selecting previously unselected package libcrypt-dev:arm64.
Preparing to unpack .../09-libcrypt-dev_1%3a4.4.18-4_arm64.deb ...
Unpacking libcrypt-dev:arm64 (1:4.4.18-4) ...
Selecting previously unselected package libtirpc-dev:arm64.
Preparing to unpack .../10-libtirpc-dev_1.3.1-1+deb11u1_arm64.deb ...
Unpacking libtirpc-dev:arm64 (1.3.1-1+deb11u1) ...
Selecting previously unselected package libnsl-dev:arm64.
Preparing to unpack .../11-libnsl-dev_1.3.0-2_arm64.deb ...
Unpacking libnsl-dev:arm64 (1.3.0-2) ...
Selecting previously unselected package libc6-dev:arm64.
Preparing to unpack .../12-libc6-dev_2.31-13+deb11u8_arm64.deb ...
Unpacking libc6-dev:arm64 (2.31-13+deb11u8) ...
Selecting previously unselected package libexpat1-dev:arm64.
Preparing to unpack .../13-libexpat1-dev_2.2.10-2+deb11u5_arm64.deb ...
Unpacking libexpat1-dev:arm64 (2.2.10-2+deb11u5) ...
Selecting previously unselected package libpython2.7:arm64.
Preparing to unpack .../14-libpython2.7_2.7.18-8+deb11u1_arm64.deb ...
Unpacking libpython2.7:arm64 (2.7.18-8+deb11u1) ...
Selecting previously unselected package libpython2.7-dev:arm64.
Preparing to unpack .../15-libpython2.7-dev_2.7.18-8+deb11u1_arm64.deb ...
Unpacking libpython2.7-dev:arm64 (2.7.18-8+deb11u1) ...
Selecting previously unselected package libpython2-dev:arm64.
Preparing to unpack .../16-libpython2-dev_2.7.18-3_arm64.deb ...
Unpacking libpython2-dev:arm64 (2.7.18-3) ...
Selecting previously unselected package manpages-dev.
Preparing to unpack .../17-manpages-dev_5.10-1_all.deb ...
Unpacking manpages-dev (5.10-1) ...
Selecting previously unselected package python2.7-dev.
Preparing to unpack .../18-python2.7-dev_2.7.18-8+deb11u1_arm64.deb ...
Unpacking python2.7-dev (2.7.18-8+deb11u1) ...
Selecting previously unselected package python2-dev.
Preparing to unpack .../19-python2-dev_2.7.18-3_arm64.deb ...
Unpacking python2-dev (2.7.18-3) ...
Selecting previously unselected package python-dev-is-python2.
Preparing to unpack .../20-python-dev-is-python2_2.7.18-9_all.deb ...
Unpacking python-dev-is-python2 (2.7.18-9) ...
Setting up libpython2.7:arm64 (2.7.18-8+deb11u1) ...
Setting up libxpm4:arm64 (1:3.5.12-1.1+deb11u1) ...
Setting up manpages (5.10-1) ...
Setting up linux-libc-dev:arm64 (5.10.209-2) ...
Setting up libtirpc-dev:arm64 (1.3.1-1+deb11u1) ...
Setting up fonts-dejavu-core (2.37-2) ...
Setting up libnsl-dev:arm64 (1.3.0-2) ...
Setting up libcrypt-dev:arm64 (1:4.4.18-4) ...
Setting up libc-dev-bin (2.31-13+deb11u8) ...
Setting up manpages-dev (5.10-1) ...
Setting up fontconfig-config (2.13.1-4.2) ...
Setting up libc6-dev:arm64 (2.31-13+deb11u8) ...
Setting up libfontconfig1:arm64 (2.13.1-4.2) ...
Setting up libexpat1-dev:arm64 (2.2.10-2+deb11u5) ...
Setting up libgd3:arm64 (2.3.0-2) ...
Setting up libc-devtools (2.31-13+deb11u8) ...
Setting up libpython2.7-dev:arm64 (2.7.18-8+deb11u1) ...
Setting up libpython2-dev:arm64 (2.7.18-3) ...
Setting up python2.7-dev (2.7.18-8+deb11u1) ...
Setting up python2-dev (2.7.18-3) ...
Setting up python-dev-is-python2 (2.7.18-9) ...
Processing triggers for libc-bin (2.31-13+deb11u8) ...
ldconfig: /lib/libusbgx.so.2 is not a symbolic link
W: --force-yes is deprecated, use one of the options starting with --allow instead.
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
W: --force-yes is deprecated, use one of the options starting with --allow instead.
E: Unable to locate package python-imaging
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
zip is already the newest version (3.0-12).
zip set to manually installed.
The following packages were automatically installed and are no longer required:
cpio initramfs-tools initramfs-tools-core klibc-utils libklibc linux-base
Use 'apt autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
W: --force-yes is deprecated, use one of the options starting with --allow instead.
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
unzip is already the newest version (6.0-26+deb11u1).
unzip set to manually installed.
The following packages were automatically installed and are no longer required:
cpio initramfs-tools initramfs-tools-core klibc-utils libklibc linux-base
Use 'apt autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
W: --force-yes is deprecated, use one of the options starting with --allow instead.
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
openssl is already the newest version (1.1.1w-0+deb11u1).
openssl set to manually installed.
The following packages were automatically installed and are no longer required:
cpio initramfs-tools initramfs-tools-core klibc-utils libklibc linux-base
Use 'apt autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
W: --force-yes is deprecated, use one of the options starting with --allow instead.
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
The following packages were automatically installed and are no longer required:
cpio initramfs-tools initramfs-tools-core klibc-utils libklibc linux-base
Use 'apt autoremove' to remove them.
Suggested packages:
libssl-doc
The following NEW packages will be installed:
libssl-dev
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 1,703 kB of archives.
After this operation, 7,913 kB of additional disk space will be used.
Get:1 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libssl-dev arm64 1.1.1w-0+deb11u1 [1,703 kB]
Fetched 1,703 kB in 19s (90.1 kB/s)
debconf: delaying package configuration, since apt-utils is not installed
Selecting previously unselected package libssl-dev:arm64.
(Reading database ... 31534 files and directories currently installed.)
Preparing to unpack .../libssl-dev_1.1.1w-0+deb11u1_arm64.deb ...
Unpacking libssl-dev:arm64 (1.1.1w-0+deb11u1) ...
Setting up libssl-dev:arm64 (1.1.1w-0+deb11u1) ...
W: --force-yes is deprecated, use one of the options starting with --allow instead.
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
The following packages were automatically installed and are no longer required:
cpio initramfs-tools initramfs-tools-core klibc-utils libklibc linux-base
Use 'apt autoremove' to remove them.
The following additional packages will be installed:
binutils binutils-aarch64-linux-gnu binutils-common cpp cpp-10 gcc-10
libasan6 libatomic1 libbinutils libcc1-0 libctf-nobfd0 libctf0 libgcc-10-dev
libgomp1 libisl23 libitm1 liblsan0 libmpc3 libmpfr6 libtsan0 libubsan1
Suggested packages:
binutils-doc cpp-doc gcc-10-locales gcc-multilib make autoconf automake
libtool flex bison gdb gcc-doc gcc-10-doc
The following NEW packages will be installed:
binutils binutils-aarch64-linux-gnu binutils-common cpp cpp-10 gcc gcc-10
libasan6 libatomic1 libbinutils libcc1-0 libctf-nobfd0 libctf0 libgcc-10-dev
libgomp1 libisl23 libitm1 liblsan0 libmpc3 libmpfr6 libtsan0 libubsan1
0 upgraded, 22 newly installed, 0 to remove and 0 not upgraded.
Need to get 36.7 MB of archives.
After this operation, 138 MB of additional disk space will be used.
Get:1 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 binutils-common arm64 2.35.2-2 [2,220 kB]
Get:2 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libbinutils arm64 2.35.2-2 [599 kB]
Get:3 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libctf-nobfd0 arm64 2.35.2-2 [108 kB]
Get:4 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libctf0 arm64 2.35.2-2 [51.0 kB]
Get:5 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 binutils-aarch64-linux-gnu arm64 2.35.2-2 [2,472 kB]
Get:6 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 binutils arm64 2.35.2-2 [61.2 kB]
Get:7 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libisl23 arm64 0.23-1 [590 kB]
Get:8 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libmpfr6 arm64 4.1.0-3 [829 kB]
Get:9 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libmpc3 arm64 1.2.0-1 [43.2 kB]
Get:10 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 cpp-10 arm64 10.2.1-6 [7,756 kB]
Get:11 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 cpp arm64 4:10.2.1-1 [19.7 kB]
Get:12 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libcc1-0 arm64 10.2.1-6 [45.1 kB]
Get:13 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libgomp1 arm64 10.2.1-6 [91.6 kB]
Get:14 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libitm1 arm64 10.2.1-6 [23.8 kB]
Get:15 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libatomic1 arm64 10.2.1-6 [9,468 B]
Get:16 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libasan6 arm64 10.2.1-6 [2,002 kB]
Get:17 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 liblsan0 arm64 10.2.1-6 [794 kB]
Get:18 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libtsan0 arm64 10.2.1-6 [1,957 kB]
Get:19 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libubsan1 arm64 10.2.1-6 [759 kB]
Get:20 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libgcc-10-dev arm64 10.2.1-6 [876 kB]
Get:21 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 gcc-10 arm64 10.2.1-6 [15.4 MB]
Get:22 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 gcc arm64 4:10.2.1-1 [5,208 B]
Fetched 36.7 MB in 2min 23s (258 kB/s)
debconf: delaying package configuration, since apt-utils is not installed
Selecting previously unselected package binutils-common:arm64.
(Reading database ... 31651 files and directories currently installed.)
Preparing to unpack .../00-binutils-common_2.35.2-2_arm64.deb ...
Unpacking binutils-common:arm64 (2.35.2-2) ...
Selecting previously unselected package libbinutils:arm64.
Preparing to unpack .../01-libbinutils_2.35.2-2_arm64.deb ...
Unpacking libbinutils:arm64 (2.35.2-2) ...
Selecting previously unselected package libctf-nobfd0:arm64.
Preparing to unpack .../02-libctf-nobfd0_2.35.2-2_arm64.deb ...
Unpacking libctf-nobfd0:arm64 (2.35.2-2) ...
Selecting previously unselected package libctf0:arm64.
Preparing to unpack .../03-libctf0_2.35.2-2_arm64.deb ...
Unpacking libctf0:arm64 (2.35.2-2) ...
Selecting previously unselected package binutils-aarch64-linux-gnu.
Preparing to unpack .../04-binutils-aarch64-linux-gnu_2.35.2-2_arm64.deb ...
Unpacking binutils-aarch64-linux-gnu (2.35.2-2) ...
Selecting previously unselected package binutils.
Preparing to unpack .../05-binutils_2.35.2-2_arm64.deb ...
Unpacking binutils (2.35.2-2) ...
Selecting previously unselected package libisl23:arm64.
Preparing to unpack .../06-libisl23_0.23-1_arm64.deb ...
Unpacking libisl23:arm64 (0.23-1) ...
Selecting previously unselected package libmpfr6:arm64.
Preparing to unpack .../07-libmpfr6_4.1.0-3_arm64.deb ...
Unpacking libmpfr6:arm64 (4.1.0-3) ...
Selecting previously unselected package libmpc3:arm64.
Preparing to unpack .../08-libmpc3_1.2.0-1_arm64.deb ...
Unpacking libmpc3:arm64 (1.2.0-1) ...
Selecting previously unselected package cpp-10.
Preparing to unpack .../09-cpp-10_10.2.1-6_arm64.deb ...
Unpacking cpp-10 (10.2.1-6) ...
Selecting previously unselected package cpp.
Preparing to unpack .../10-cpp_4%3a10.2.1-1_arm64.deb ...
Unpacking cpp (4:10.2.1-1) ...
Selecting previously unselected package libcc1-0:arm64.
Preparing to unpack .../11-libcc1-0_10.2.1-6_arm64.deb ...
Unpacking libcc1-0:arm64 (10.2.1-6) ...
Selecting previously unselected package libgomp1:arm64.
Preparing to unpack .../12-libgomp1_10.2.1-6_arm64.deb ...
Unpacking libgomp1:arm64 (10.2.1-6) ...
Selecting previously unselected package libitm1:arm64.
Preparing to unpack .../13-libitm1_10.2.1-6_arm64.deb ...
Unpacking libitm1:arm64 (10.2.1-6) ...
Selecting previously unselected package libatomic1:arm64.
Preparing to unpack .../14-libatomic1_10.2.1-6_arm64.deb ...
Unpacking libatomic1:arm64 (10.2.1-6) ...
Selecting previously unselected package libasan6:arm64.
Preparing to unpack .../15-libasan6_10.2.1-6_arm64.deb ...
Unpacking libasan6:arm64 (10.2.1-6) ...
Selecting previously unselected package liblsan0:arm64.
Preparing to unpack .../16-liblsan0_10.2.1-6_arm64.deb ...
Unpacking liblsan0:arm64 (10.2.1-6) ...
Selecting previously unselected package libtsan0:arm64.
Preparing to unpack .../17-libtsan0_10.2.1-6_arm64.deb ...
Unpacking libtsan0:arm64 (10.2.1-6) ...
Selecting previously unselected package libubsan1:arm64.
Preparing to unpack .../18-libubsan1_10.2.1-6_arm64.deb ...
Unpacking libubsan1:arm64 (10.2.1-6) ...
Selecting previously unselected package libgcc-10-dev:arm64.
Preparing to unpack .../19-libgcc-10-dev_10.2.1-6_arm64.deb ...
Unpacking libgcc-10-dev:arm64 (10.2.1-6) ...
Selecting previously unselected package gcc-10.
Preparing to unpack .../20-gcc-10_10.2.1-6_arm64.deb ...
Unpacking gcc-10 (10.2.1-6) ...
Selecting previously unselected package gcc.
Preparing to unpack .../21-gcc_4%3a10.2.1-1_arm64.deb ...
Unpacking gcc (4:10.2.1-1) ...
Setting up binutils-common:arm64 (2.35.2-2) ...
Setting up libctf-nobfd0:arm64 (2.35.2-2) ...
Setting up libgomp1:arm64 (10.2.1-6) ...
Setting up libasan6:arm64 (10.2.1-6) ...
Setting up libmpfr6:arm64 (4.1.0-3) ...
Setting up libmpc3:arm64 (1.2.0-1) ...
Setting up libatomic1:arm64 (10.2.1-6) ...
Setting up libubsan1:arm64 (10.2.1-6) ...
Setting up libbinutils:arm64 (2.35.2-2) ...
Setting up libisl23:arm64 (0.23-1) ...
Setting up libcc1-0:arm64 (10.2.1-6) ...
Setting up liblsan0:arm64 (10.2.1-6) ...
Setting up cpp-10 (10.2.1-6) ...
Setting up libitm1:arm64 (10.2.1-6) ...
Setting up libtsan0:arm64 (10.2.1-6) ...
Setting up libctf0:arm64 (2.35.2-2) ...
Setting up libgcc-10-dev:arm64 (10.2.1-6) ...
Setting up binutils-aarch64-linux-gnu (2.35.2-2) ...
Setting up binutils (2.35.2-2) ...
Setting up gcc-10 (10.2.1-6) ...
Setting up cpp (4:10.2.1-1) ...
Setting up gcc (4:10.2.1-1) ...
Processing triggers for libc-bin (2.31-13+deb11u8) ...
ldconfig: /lib/libusbgx.so.2 is not a symbolic link
W: --force-yes is deprecated, use one of the options starting with --allow instead.
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
The following packages were automatically installed and are no longer required:
cpio initramfs-tools initramfs-tools-core klibc-utils libklibc linux-base
Use 'apt autoremove' to remove them.
The following additional packages will be installed:
libicu67
The following NEW packages will be installed:
libicu67 libxml2
0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded.
Need to get 9,097 kB of archives.
After this operation, 35.8 MB of additional disk space will be used.
Get:1 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libicu67 arm64 67.1-7 [8,467 kB]
Get:2 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libxml2 arm64 2.9.10+dfsg-6.7+deb11u4 [629 kB]
Fetched 9,097 kB in 43s (213 kB/s)
debconf: delaying package configuration, since apt-utils is not installed
Selecting previously unselected package libicu67:arm64.
(Reading database ... 32367 files and directories currently installed.)
Preparing to unpack .../libicu67_67.1-7_arm64.deb ...
Unpacking libicu67:arm64 (67.1-7) ...
Selecting previously unselected package libxml2:arm64.
Preparing to unpack .../libxml2_2.9.10+dfsg-6.7+deb11u4_arm64.deb ...
Unpacking libxml2:arm64 (2.9.10+dfsg-6.7+deb11u4) ...
Setting up libicu67:arm64 (67.1-7) ...
Setting up libxml2:arm64 (2.9.10+dfsg-6.7+deb11u4) ...
Processing triggers for libc-bin (2.31-13+deb11u8) ...
ldconfig: /lib/libusbgx.so.2 is not a symbolic link
W: --force-yes is deprecated, use one of the options starting with --allow instead.
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
The following packages were automatically installed and are no longer required:
cpio initramfs-tools initramfs-tools-core klibc-utils libklibc linux-base
Use 'apt autoremove' to remove them.
The following additional packages will be installed:
icu-devtools libicu-dev
Suggested packages:
icu-doc pkg-config
The following NEW packages will be installed:
icu-devtools libicu-dev libxml2-dev
0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded.
Need to get 10.4 MB of archives.
After this operation, 49.2 MB of additional disk space will be used.
Get:1 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 icu-devtools arm64 67.1-7 [189 kB]
Get:2 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libicu-dev arm64 67.1-7 [9,468 kB]
Get:3 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libxml2-dev arm64 2.9.10+dfsg-6.7+deb11u4 [753 kB]
Fetched 10.4 MB in 1min 2s (168 kB/s)
debconf: delaying package configuration, since apt-utils is not installed
Selecting previously unselected package icu-devtools.
(Reading database ... 32394 files and directories currently installed.)
Preparing to unpack .../icu-devtools_67.1-7_arm64.deb ...
Unpacking icu-devtools (67.1-7) ...
Selecting previously unselected package libicu-dev:arm64.
Preparing to unpack .../libicu-dev_67.1-7_arm64.deb ...
Unpacking libicu-dev:arm64 (67.1-7) ...
Selecting previously unselected package libxml2-dev:arm64.
Preparing to unpack .../libxml2-dev_2.9.10+dfsg-6.7+deb11u4_arm64.deb ...
Unpacking libxml2-dev:arm64 (2.9.10+dfsg-6.7+deb11u4) ...
Setting up icu-devtools (67.1-7) ...
Setting up libicu-dev:arm64 (67.1-7) ...
Setting up libxml2-dev:arm64 (2.9.10+dfsg-6.7+deb11u4) ...
W: --force-yes is deprecated, use one of the options starting with --allow instead.
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
W: --force-yes is deprecated, use one of the options starting with --allow instead.
E: Unable to locate package libxslt
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
zlib1g is already the newest version (1:1.2.11.dfsg-2+deb11u2).
The following packages were automatically installed and are no longer required:
cpio initramfs-tools initramfs-tools-core klibc-utils libklibc linux-base
Use 'apt autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
W: --force-yes is deprecated, use one of the options starting with --allow instead.
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
The following packages were automatically installed and are no longer required:
cpio initramfs-tools initramfs-tools-core klibc-utils libklibc linux-base
Use 'apt autoremove' to remove them.
The following NEW packages will be installed:
zlib1g-dev
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 189 kB of archives.
After this operation, 589 kB of additional disk space will be used.
Get:1 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 zlib1g-dev arm64 1:1.2.11.dfsg-2+deb11u2 [189 kB]
Fetched 189 kB in 2s (89.0 kB/s)
debconf: delaying package configuration, since apt-utils is not installed
Selecting previously unselected package zlib1g-dev:arm64.
(Reading database ... 32709 files and directories currently installed.)
Preparing to unpack .../zlib1g-dev_1%3a1.2.11.dfsg-2+deb11u2_arm64.deb ...
Unpacking zlib1g-dev:arm64 (1:1.2.11.dfsg-2+deb11u2) ...
Setting up zlib1g-dev:arm64 (1:1.2.11.dfsg-2+deb11u2) ...
W: --force-yes is deprecated, use one of the options starting with --allow instead.
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
The following packages were automatically installed and are no longer required:
cpio initramfs-tools initramfs-tools-core klibc-utils libklibc linux-base
Use 'apt autoremove' to remove them.
The following additional packages will be installed:
libjpeg62-turbo-dev
The following NEW packages will be installed:
libjpeg-dev libjpeg62-turbo-dev
0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded.
Need to get 323 kB of archives.
After this operation, 732 kB of additional disk space will be used.
Get:1 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libjpeg62-turbo-dev arm64 1:2.0.6-4 [255 kB]
Get:2 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libjpeg-dev arm64 1:2.0.6-4 [67.8 kB]
Fetched 323 kB in 1s (243 kB/s)
The text was updated successfully, but these errors were encountered: