stairs_stringer
stairs_stringer is a Stairs Brushes that generates stairs with a stringer of a specific height.
- Mode: Automate one of the parameters (see below)
- Direction: The facing direction of the stairs
- Count: The number of runs to fit within the brushes dimensions. If the box's dimensions are not divisible by the count, the depth of each run will be inconsistent.
- Height: The height of each run
- Stringer: The height of the stringer (the area extending beneath each run)
| Mode | Description |
|---|---|
0 |
All parameters are used as-is |
1 |
The Height of each run is adjusted to fill the available space (the value of the parameter is ignored). Count and Stringer can still be adjusted. |
2 |
Count is adjusted to fill the available space (the value of the parameter is ignored). Height and Stringer can still be adjusted. |
3 |
Stringer is adjusted to fill the available space (the value of the parameter is ignored). Count and Height can still be adjusted. |
 |
 |
Direction: 0
|
Direction: 1
|
|---|---|
 |
 |
Direction: 2
|
Direction: 3
|
 |
 |
 |
Stringer: 1
|
Stringer: 2
|
Stringer: 4
|
|---|