Skip to content

Stairs Brush

Jump to bottom
Lachlan McDonald edited this page Jun 9, 2020 · 16 revisions

Generates a slope of stairs. This shader is used as a brush.

Parameters

  • Direction: The facing direction of the stairs
  • Count: The number of runs to fit within the brush's dimensions. If the box's dimensions are not divisible by the count, the depth of each run will be inconsistent.
  • Height: The height of each run
  • X/Y Gap: The distance between each run of adjacent stairs.
  • Z Gap: The distance between each run and the next run above it.

Count

Example of a count of 2 Example of a count of 4
Example of a count of 6 Example of a count of 8

Height

Example of a height of 1 Example of a height of 2
Example of a height of 3 Example of a height of 4

X/Y Gap

Example of a X/Y gap of 0 Example of a X/Y gap of 1
Example of a X/Y gap of 2 Example of a X/Y gap of 3

Z Gap

Example of a Z gap of 0 Example of a Z gap of 1
Example of a Z gap of 2 Example of a Z gap of 3

All content in this wiki is licenced under the CC BY-NC-SA 4.0 license. Code snippets are dual-licenced under the MIT License.

Clone this wiki locally