Air Purifier

device.type: air-purifier
Models: Mi Air Purifier 1 & 2, Pro
Model identifiers: zhimi.airpurifier.m1, zhimi.airpurifier.v1, zhimi.airpurifier.v2, zhimi.airpurifier.v3, zhimi.airpurifier.v6

Basic API

Properties

power, boolean indicating the power state of the device
mode, string indicating the current mode
temperature, number indicating the temperature in Celsius
humidity, number indicating the relative humidity in percent
aqi, number indicating the air quality index (based on PM2.5)

Power

device.power, read-only boolean indicating if the device is powered on
device.setPower(boolean), change the power state of the device, returns a promise

Modes

The air purifiers have different modes that controls their speed.

device.mode, read-only string indicating the current mode
device.modes, read-only array indicating the modes supports by the device
device.setMode(string), set the current mode of the device, returns a promise

The modes are currently:

idle, turn the device off
auto, set the device to automatic mode where it controls the speed itself
silent, lowest speed, for silent operation or night time
low, low speed
medium, medium speed
high, high speed

Sensor values

device.temperature - number indicating the temperature in Celsius
device.humidity - number indicating the relative humidity in percent
device.aqi - number indicating the Air Quality Index (based on PM2.5)

Settings

device.buzzer - boolean indicating if the buzzer (beep) is active
device.setBuzzer(boolean) - switch the buzzer on or off
device.led - if the LED is on or off
device.setLed(boolean) - switch the LED on or off
device.ledBrightness - the LED brightness, bright, dim or off
device.setLedBrightness(string) - set the brightness of the LED
device.favoriteLevel - set the speed the device should run at when mode is favorite. Between 0 and 16.
device.setFavoriteLevel(number) - set the speed for mode favorite