From 125fae633f6609679c9b216a79db293d9efbf019 Mon Sep 17 00:00:00 2001
From: Julian Schill <j.schill@web.de>
Date: Mon, 27 May 2024 10:17:47 +0200
Subject: [PATCH] Fix Formatting in README.md

---
 README.md | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/README.md b/README.md
index f465fed..7b63e87 100644
--- a/README.md
+++ b/README.md
@@ -42,20 +42,25 @@ The module can be installed into a existing Klipper installation with an install
 
 If your directory structure differs from the usual setup you can configure the
 installation script with parameters:
+
     ./install-led_effect.sh [-k <klipper path>] [-s <klipper service name>] [-c <configuration path>]
 
 ### Manual installation
 Clone the repository:
+
     cd ~
     git clone https://github.com/julianschill/klipper-led_effect.git
 
 Stop Klipper:
+
     systemctl stop klipper
 
 Link the file in the Klipper directory (adjust the paths as needed):
+
     ln -s klipper-led_effect/led_effect.py ~/klipper/extras/led_effect.py
 
 Start Klipper:
+
     systemctl start klipper
 
 Add the updater section to moonraker.conf and restart moonraker to receive 
@@ -78,12 +83,15 @@ section in the Moonraker configuration. Then run the script to remove the link:
 
 If your directory structure differs from the usual setup you can configure the
 installation script with parameters:
+
     ./install-led_effect.sh -u [-k <klipper path>] [-s <klipper service name>] [-c <configuration path>]
 
 If that fails, you can delete the link in Klipper manually:
+
     rm ~/klipper/extras/led_effect.py
 
-Delete the repository (optional)
+Delete the repository (optional):
+
     cd ~
     rm -rf klipper-led_effect