community.windows.win_net_adapter_feature_module.rst

community.windows.win_net_adapter_feature

Enable or disable certain network adapters.

Version added: 1.2.0

• Synopsis
• Parameters
• Examples
• Status

Synopsis

• Enable or disable some network components of a certain network adapter or all the network adapters.

Parameters

Parameter	Choices/Defaults	Comments
component_id list / elements=string / required		Specify the below component_id of network adapters. component_id (DisplayName) ms_implat (Microsoft Network Adapter Multiplexor Protocol) ms_lltdio (Link-Layer Topology Discovery Mapper I/O Driver) ms_tcpip6 (Internet Protocol Version 6 (TCP/IPv6)) ms_tcpip (Internet Protocol Version 4 (TCP/IPv4)) ms_lldp (Microsoft LLDP Protocol Driver) ms_rspndr (Link-Layer Topology Discovery Responder) ms_msclient (Client for Microsoft Networks) ms_pacer (QoS Packet Scheduler) If you'd like to set custom adapters like 'Juniper Network Service', get the component_id by running the Get-NetAdapterBinding cmdlet.
interface list / elements=string / required		Name of Network Adapter Interface. For example, Ethernet0 or *.
state string	Choices: enabled ← disabled	Specify the state of ms_tcpip6 of interfaces.

Examples

- name: enable multiple interfaces of multiple interfaces
  community.windows.win_net_adapter_feature:
    interface:
    - 'Ethernet0'
    - 'Ethernet1'
    state: enabled
    component_id:
    - ms_tcpip6
    - ms_server

- name: Enable ms_tcpip6 of all the Interface
  community.windows.win_net_adapter_feature:
    interface: '*'
    state: enabled
    component_id:
    - ms_tcpip6

Status

Authors

• ライトウェルの人 (@jirolin)