We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
NodOn SIN-4-FP-21
Hello
all features missing, is it possible to add support for this product
Mode sélection (confort, …)
[ { "name": "power", "label": "Power", "access": 1, "type": "numeric", "property": "power", "description": "Instantaneous measured power", "category": "diagnostic", "unit": "W" }, { "name": "energy", "label": "Energy", "access": 1, "type": "numeric", "property": "energy", "description": "Sum of consumed energy", "unit": "kWh" }, { "name": "pilot_wire_mode", "label": "Pilot wire mode", "access": 7, "type": "enum", "property": "pilot_wire_mode", "description": "Controls the target temperature of the heater, with respect to the temperature set on that heater. Possible values: comfort (target temperature = heater set temperature) eco (target temperature = heater set temperature - 3.5°C), frost_protection (target temperature = 7 to 8°C), off (heater stops heating), and the less commonly used comfort_-1 (target temperature = heater set temperature - 1°C), comfort_-2 (target temperature = heater set temperature - 2°C),.", "values": [ "comfort", "eco", "frost_protection", "off", "comfort_-1", "comfort_-2" ] }, { "name": "linkquality", "label": "Linkquality", "access": 1, "type": "numeric", "property": "linkquality", "description": "Link quality (signal strength)", "category": "diagnostic", "unit": "lqi", "value_max": 255, "value_min": 0 } ]
No response
The text was updated successfully, but these errors were encountered:
Please same thing for ADEO SIN-4-FP-21_EQU which is exactly the same product.
Sorry, something went wrong.
Is this a duplicate of #505 or what are your expecting?
You didn't list any HomeKit Services and Characteristics.
No branches or pull requests
Device Model
NodOn SIN-4-FP-21
Is there an existing issue for this?
Supported by Zigbee2MQTT?
Missing features / functionality
Hello
all features missing, is it possible to add support for this product
HomeKit Services and Characteristics
Mode sélection (confort, …)
Exposes information from Zigbee2MQTT
Additional information / Other remarks
No response
The text was updated successfully, but these errors were encountered: