- IQRF TR-72
- IQRF TR-52
This library is supported on AVR-based and SAM-based Arduino compatable platforms (e.g. Arduino Uno, Leonardo, Mega, Nano, Due) and PIC32-based Arduino compatable platforms (e.g. chipKIT).
The best way how to install this library is to download a latest package or use a platformio:
platformio lib install "IQRF SPI"
The following table shows the typical pin layout used:
| Signal | IQRF BB-01 | Uno / Nano | Mega | Leonardo / Micro | Pro Micro |
|---|---|---|---|---|---|
| Reset [1] | –TRPWR | 9 | 5 | RESET | RST |
| SPI SS | SS | 10 | 53 | 10 | 10 |
| SPI MOSI | MOSI | 11 / ICSP-4 | 51 | ICSP-4 | 16 |
| SPI MISO | MISO | 12 / ICSP-1 | 50 | ICSP-1 | 14 |
| SPI SCK | SCK | 13 / ICSP-3 | 52 | ICSP-3 | 15 |
[1] Configurable, typically defined as TR_RESET_IO in sketch/program.
| MCU | Works | Boards |
|---|---|---|
| Atmega328 @ 16MHz | ✓ | Arduino Uno, Nano |
| Atmega32u4 @ 16MHz | ✓ | Arduino Leonardo, Micro |
| Atmega2560 @ 16MHz | ✓ | Arduino Mega 2560 |
| ATSAM3X8E | ✓ | Arduino Due |
| PIC32MX320F128H | ✓ | chipKIT Uno32 |
| PIC32MX340F512H | ✓ | chipKIT uC32 |
| MK66FX1M0VMD18 | ✓ | Teensy 3.6 |
Documentation you can found on this page.
This library is licensed under Apache License 2.0:
Copyright 2015-2016 MICRORISC s.r.o.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.