The Berto Shelly Relay driver allows connection of Shelly Relay devices including the Shelly 1, Shelly 1PM, Shelly 2.5 and Shelly 4 Pro. Messaging to and from the devices is managed by the Berto MQTT Bridge.
The Berto MQTT Bridge needs to be installed in your project.
- Registered Devices - List of available Shelly devices registered on the MQTT broker.
- Selected Device - The Shelly relay used by the driver.
- Model - Model of relay
- MAC Address - MAC Address relay
- IP Address - IP Address of relay
- Firmware - Firmware version installed on the relay.
- Relay (1-4) State - Current state of relay (On or Off)
- Button (1-4) State - Current state of button (On or Off)
- Status - MQTT connection status
The driver creates the required standard relay connections that can be connected to relay devices. The Berto Relay Light can be used to add simple On/Off lights.