The Berto Shelly Light driver allows connection of Shelly RGBW2 device. The driver operates as eitehr a single colour RGBW bulb or as 4 seperate white bulbs depending on the Shelly configuration. Messaging to and from the device is managed by the Berto MQTT Bridge.
The Berto MQTT Bridge needs to be installed in your project.
- Registered Devices - List of available Shelly devices registered on the MQTT broker.
- Selected Device - The Shelly light used by the driver.
- Model - Model of relay
- MAC Address - MAC Address relay
- IP Address - IP Address of relay
- Firmware - Firmware version installed on the relay
- Mode - The device configuation either Color RGBW or 4 Channel White
- Channel - The light channel when in White mode
- State - Current power state of light
- Level - The bright level when in White mode (0 -100)
- Red - The level of red color (0 - 255)
- Green - The level of green color (0 - 255)
- Blue - The level of blue color (0 - 255)
- White - The level of white color (0 - 255)
- Brightness - The level of brightness for all colors (0 - 100)
- Effect - The effect configured on the light
- Status - MQTT connection status
- Initial Release
- Fixed issue where Shelly device was not recognized after a controller reboot.