configure.xml

<?xml version="1.0" encoding="UTF-8"?>
<configuration>
<!--   <spec name = "riscv_dir"          value = "/opt/riscv32" /> -->
  <spec name = "overlay_type"       value = "psnoc" />
<!--   <spec name = "overlay_type"       value = "hipr" /> -->
  <!--spec name = "riscv_dir"          value = "/scratch/unsafe/RISCV/riscv32i" -->
  <!--specifications for pr_flow tool-->
   
  <!--spec name = "board"              value = "ultra96" -->
  <!--spec name = "board"              value = "au50" -->
  <spec name = "board"              value = "zcu102" />
  <spec name = "Xilinx_dir"         value = "/tools/Xilinx/Vitis/2021.1/settings64.sh" />
  <spec name = "xrt_dir"            value = "/opt/xilinx/xrt/setup.sh" /> <!-- Not necessary for embedded platform -->


  <spec name = "email"              value = "you_email@seas.upenn.edu" />
  <spec name = "bft_regen"          value = "1" />
  <spec name = "static_regen"       value = "1" />
  <spec name = "hls_regen"          value = "1" />
  <spec name = "leaf_syn_regen"     value = "1" />
  <spec name = "leaf_impl_regen"    value = "1" />
  <spec name = "bit_gen_regen"      value = "1" />
  <spec name = "platform_regen"     value = "0" />
  <spec name = "mono_bft_regen"     value = "0" />
  <spec name = "mono_regen"         value = "0" />
  <spec name = "config_regen"       value = "1" />
  <spec name = "grid"               value = "70s" />
  <spec name = "maxThreads"         value = "8" />
  <spec name = "maxJobs"            value = "32" />
  <spec name = "node"               value = "1" />
  <!--spec name = "back_end"           value = "slurm" -->
  <spec name = "back_end"           value = "local" />
  <!--spec name = "back_end"           value = "qsub" -->
  <!--spec name = "mem"                value = "7000mb" -->
  <spec name = "mem"                value = "32G" />
  <spec name = "PR_mode"            value = "noquick" />
  <spec name = "port_bits"          value = "4" />
  <spec name = "bram_addr_bits"     value = "7" />
  <spec name = "payload_bits"       value = "32" />
  <spec name = "bram_addr"          value = "0" />
  <spec name = "freespace"          value = "64" />
  <spec name = "input_port_base"    value = "2" />
  <spec name = "output_port_base"   value = "9" />
  <spec name = "min_net"            value = "0" />
  <spec name = "pp_0"               value = "1" />
  <spec name = "pp_1"               value = "1" />
  <spec name = "input_port_bram_cost"  value = "5" />
  <spec name = "output_port_bram_cost" value = "1" />



  <clock name = 'clk_bft' period = "3.3" />
  <clock name = 'clk_user' period = "5" />

 

</configuration>