acinclude.m4

# -*- autoconf -*-

# Copyright (c) 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 Nicira, Inc.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

dnl OVS_ENABLE_WERROR
AC_DEFUN([OVS_ENABLE_WERROR],
  [AC_ARG_ENABLE(
     [Werror],
     [AC_HELP_STRING([--enable-Werror], [Add -Werror to CFLAGS])],
     [], [enable_Werror=no])
   AC_CONFIG_COMMANDS_PRE(
     [if test "X$enable_Werror" = Xyes; then
        OVS_CFLAGS="$OVS_CFLAGS -Werror"
      fi])

   # Unless --enable-Werror is specified, report but do not fail the build
   # for errors reported by flake8.
   if test "X$enable_Werror" = Xyes; then
     FLAKE8_WERROR=
   else
     FLAKE8_WERROR=-
   fi
   AC_SUBST([FLAKE8_WERROR])

   # If --enable-Werror is specified, fail the build on sparse warnings.
   if test "X$enable_Werror" = Xyes; then
     SPARSE_WERROR=-Wsparse-error
   else
     SPARSE_WERROR=
   fi
   AC_SUBST([SPARSE_WERROR])])

dnl OVS_CHECK_DDLOG([VERSION])
dnl
dnl Configure ddlog source tree, checking for the given DDlog VERSION.
dnl VERSION should be a major and minor, e.g. 0.36, which will accept
dnl 0.36.0, 0.36.1, and so on.  Omit VERSION to accept any version of
dnl ddlog (which is probably only useful for developers who are trying
dnl different versions, since OVN is currently bound to a particular
dnl DDlog version).
AC_DEFUN([OVS_CHECK_DDLOG], [
  AC_ARG_VAR([DDLOG_HOME], [Root of the DDlog installation])
  AC_ARG_WITH(
    [ddlog],
    [AC_HELP_STRING([--with-ddlog[[=INSTALLDIR|LIBDIR]]], [Enables DDlog])],
    [DDLOG_PATH=$PATH
     if test "$withval" = yes; then
       # --with-ddlog: $DDLOG_HOME must be set
       if test -z "$DDLOG_HOME"; then
         AC_MSG_ERROR([To build with DDlog, specify the DDlog install or library directory on --with-ddlog or in \$DDLOG_HOME])
       fi
       DDLOGLIBDIR=$DDLOG_HOME/lib
       test -d "$DDLOG_HOME/bin" && DDLOG_PATH=$DDLOG_HOME/bin
     elif test -f "$withval/lib/ddlog_std.dl"; then
       # --with-ddlog=INSTALLDIR
       DDLOGLIBDIR=$withval/lib
       test -d "$withval/bin" && DDLOG_PATH=$withval/bin
     elif test -f "$withval/ddlog_std.dl"; then
       # --with-ddlog=LIBDIR
       DDLOGLIBDIR=$withval/lib
     else
       AC_MSG_ERROR([$withval does not contain ddlog_std.dl or lib/ddlog_std.dl])
     fi],
    [DDLOGLIBDIR=no
     DDLOG_PATH=no])

  AC_MSG_CHECKING([for DDlog library directory])
  AC_MSG_RESULT([$DDLOGLIBDIR])
  if test "$DDLOGLIBDIR" != no; then
    AC_ARG_VAR([DDLOG], [path to ddlog binary])
    AC_PATH_PROGS([DDLOG], [ddlog], [none], [$DDLOG_PATH])
    if test X"$DDLOG" = X"none"; then
        AC_MSG_ERROR([ddlog is required to build with DDlog])
    fi

    AC_ARG_VAR([OVSDB2DDLOG], [path to ovsdb2ddlog binary])
    AC_PATH_PROGS([OVSDB2DDLOG], [ovsdb2ddlog], [none], [$DDLOG_PATH])
    if test X"$OVSDB2DDLOG" = X"none"; then
        AC_MSG_ERROR([ovsdb2ddlog is required to build with DDlog])
    fi

    for tool in "$DDLOG" "$OVSDB2DDLOG"; do
      AC_MSG_CHECKING([$tool version])
      $tool --version >&AS_MESSAGE_LOG_FD 2>&1
      tool_version=$($tool --version | sed -n 's/^.* v\([[0-9]][[^ ]]*\).*/\1/p')
      AC_MSG_RESULT([$tool_version])
      m4_if([$1], [], [], [
          AS_CASE([$tool_version],
              [$1 | $1.*], [],
              [*], [AC_MSG_ERROR([DDlog version $1.x is required, but $tool is version $tool_version])])])
    done

    AC_ARG_VAR([CARGO])
    AC_CHECK_PROGS([CARGO], [cargo], [none])
    if test X"$CARGO" = X"none"; then
        AC_MSG_ERROR([cargo is required to build with DDlog])
    fi

    AC_ARG_VAR([RUSTC])
    AC_CHECK_PROGS([RUSTC], [rustc], [none])
    if test X"$RUSTC" = X"none"; then
        AC_MSG_ERROR([rustc is required to build with DDlog])
    fi

    AC_SUBST([DDLOGLIBDIR])
    AC_DEFINE([DDLOG], [1], [Build OVN daemons with ddlog.])
  fi

  AM_CONDITIONAL([DDLOG], [test "$DDLOGLIBDIR" != no])
])

dnl Checks for net/if_dl.h.
dnl
dnl (We use this as a proxy for checking whether we're building on FreeBSD
dnl or NetBSD.)
AC_DEFUN([OVS_CHECK_IF_DL],
  [AC_CHECK_HEADER([net/if_dl.h],
                   [HAVE_IF_DL=yes],
                   [HAVE_IF_DL=no])
   AM_CONDITIONAL([HAVE_IF_DL], [test "$HAVE_IF_DL" = yes])
   if test "$HAVE_IF_DL" = yes; then
      AC_DEFINE([HAVE_IF_DL], [1],
                [Define to 1 if net/if_dl.h is available.])

      # On these platforms we use libpcap to access network devices.
      AC_SEARCH_LIBS([pcap_open_live], [pcap])
   fi])

dnl Checks for buggy strtok_r.
dnl
dnl Some versions of glibc 2.7 has a bug in strtok_r when compiling
dnl with optimization that can cause segfaults:
dnl
dnl http://sources.redhat.com/bugzilla/show_bug.cgi?id=5614.
AC_DEFUN([OVS_CHECK_STRTOK_R],
  [AC_CACHE_CHECK(
     [whether strtok_r macro segfaults on some inputs],
     [ovs_cv_strtok_r_bug],
     [AC_RUN_IFELSE(
        [AC_LANG_PROGRAM([#include <stdio.h>
                          #include <string.h>
                         ],
                         [[#if __GLIBC__ == 2 && __GLIBC_MINOR__ < 8
                           /* Assume bug is present, because relatively minor
                              changes in compiler settings (e.g. optimization
                              level) can make it crop up. */
                           return 1;
                           #else
                           char string[] = ":::";
                           char *save_ptr = (char *) 0xc0ffee;
                           char *token1, *token2;
                           token1 = strtok_r(string, ":", &save_ptr);
                           token2 = strtok_r(NULL, ":", &save_ptr);
                           freopen ("/dev/null", "w", stdout);
                           printf ("%s %s\n", token1, token2);
                           return 0;
                           #endif
                          ]])],
        [ovs_cv_strtok_r_bug=no],
        [ovs_cv_strtok_r_bug=yes],
        [ovs_cv_strtok_r_bug=yes])])
   if test $ovs_cv_strtok_r_bug = yes; then
     AC_DEFINE([HAVE_STRTOK_R_BUG], [1],
               [Define if strtok_r macro segfaults on some inputs])
   fi
])

dnl ----------------------------------------------------------------------
dnl These macros are from GNU PSPP, with the following original license:
dnl Copyright (C) 2005, 2006, 2007 Free Software Foundation, Inc.
dnl This file is free software; the Free Software Foundation
dnl gives unlimited permission to copy and/or distribute it,
dnl with or without modifications, as long as this notice is preserved.

AC_DEFUN([_OVS_CHECK_CC_OPTION], [dnl
  m4_define([ovs_cv_name], [ovs_cv_[]m4_translit([$1], [-= ], [__])])dnl
  AC_CACHE_CHECK([whether $CC accepts $1], [ovs_cv_name], 
    [ovs_save_CFLAGS="$CFLAGS"
     dnl Include -Werror in the compiler options, because without -Werror
     dnl clang's GCC-compatible compiler driver does not return a failure
     dnl exit status even though it complains about options it does not
     dnl understand.
     dnl
     dnl Also, check stderr as gcc exits with status 0 for options
     dnl rejected at getopt level.
     dnl    % touch /tmp/a.c
     dnl    % gcc -g -c -Werror -Qunused-arguments /tmp/a.c; echo $?
     dnl    gcc: unrecognized option '-Qunused-arguments'
     dnl    0
     dnl    %
     dnl
     dnl In addition, GCC does not complain about a -Wno-<foo> option that
     dnl it does not understand, unless it has another error to report, so
     dnl instead of testing for -Wno-<foo>, test for the positive version.
     CFLAGS="$CFLAGS $WERROR m4_bpatsubst([$1], [-Wno-], [-W])"
     AC_COMPILE_IFELSE(
       [AC_LANG_SOURCE([int x;])],
       [if test -s conftest.err && grep "unrecognized option" conftest.err
        then
          ovs_cv_name[]=no
        else
          ovs_cv_name[]=yes
        fi],
       [ovs_cv_name[]=no])
     CFLAGS="$ovs_save_CFLAGS"])
  if test $ovs_cv_name = yes; then
    m4_if([$2], [], [:], [$2])
  else
    m4_if([$3], [], [:], [$3])
  fi
])

dnl OVS_CHECK_WERROR
dnl
dnl Check whether the C compiler accepts -Werror.
dnl Sets $WERROR to "-Werror", if so, and otherwise to the empty string.
AC_DEFUN([OVS_CHECK_WERROR],
  [WERROR=
   _OVS_CHECK_CC_OPTION([-Werror], [WERROR=-Werror])])

dnl OVS_CHECK_CC_OPTION([OPTION], [ACTION-IF-ACCEPTED], [ACTION-IF-REJECTED])
dnl Check whether the given C compiler OPTION is accepted.
dnl If so, execute ACTION-IF-ACCEPTED, otherwise ACTION-IF-REJECTED.
AC_DEFUN([OVS_CHECK_CC_OPTION],
  [AC_REQUIRE([OVS_CHECK_WERROR])
   _OVS_CHECK_CC_OPTION([$1], [$2], [$3])])

dnl OVS_ENABLE_OPTION([OPTION])
dnl Check whether the given C compiler OPTION is accepted.
dnl If so, add it to WARNING_FLAGS.
dnl Example: OVS_ENABLE_OPTION([-Wdeclaration-after-statement])
AC_DEFUN([OVS_ENABLE_OPTION], 
  [OVS_CHECK_CC_OPTION([$1], [WARNING_FLAGS="$WARNING_FLAGS $1"])
   AC_SUBST([WARNING_FLAGS])])

dnl OVS_CONDITIONAL_CC_OPTION([OPTION], [CONDITIONAL])
dnl Check whether the given C compiler OPTION is accepted.
dnl If so, enable the given Automake CONDITIONAL.

dnl Example: OVS_CONDITIONAL_CC_OPTION([-Wno-unused], [HAVE_WNO_UNUSED])
AC_DEFUN([OVS_CONDITIONAL_CC_OPTION],
  [OVS_CHECK_CC_OPTION(
    [$1], [ovs_have_cc_option=yes], [ovs_have_cc_option=no])
   AM_CONDITIONAL([$2], [test $ovs_have_cc_option = yes])])
dnl ----------------------------------------------------------------------

dnl Check for too-old XenServer.
AC_DEFUN([OVS_CHECK_XENSERVER_VERSION],
  [AC_CACHE_CHECK([XenServer release], [ovs_cv_xsversion],
    [if test -e /etc/redhat-release; then
       ovs_cv_xsversion=`sed -n 's/^XenServer DDK release \([[^-]]*\)-.*/\1/p' /etc/redhat-release`
     fi
     if test -z "$ovs_cv_xsversion"; then
       ovs_cv_xsversion=none
     fi])
  case $ovs_cv_xsversion in
    none)
      ;;

    [[1-9]][[0-9]]* |                    dnl XenServer 10 or later
    [[6-9]]* |                           dnl XenServer 6 or later
    5.[[7-9]]* |                         dnl XenServer 5.7 or later
    5.6.[[1-9]][[0-9]][[0-9]][[0-9]]* |  dnl XenServer 5.6.1000 or later
    5.6.[[2-9]][[0-9]][[0-9]]* |         dnl XenServer 5.6.200 or later
    5.6.1[[0-9]][[0-9]])                 dnl Xenserver 5.6.100 or later
      ;;

    *)
      AC_MSG_ERROR([This appears to be XenServer $ovs_cv_xsversion, but only XenServer 5.6.100 or later is supported.  (If you are really using a supported version of XenServer, you may override this error message by specifying 'ovs_cv_xsversion=5.6.100' on the "configure" command line.)])
      ;;
  esac])

dnl OVS_CHECK_SPARSE_TARGET
dnl
dnl The "cgcc" script from "sparse" isn't very good at detecting the
dnl target for which the code is being built.  This helps it out.
AC_DEFUN([OVS_CHECK_SPARSE_TARGET],
  [AC_CACHE_CHECK(
    [target hint for cgcc],
    [ac_cv_sparse_target],
    [AS_CASE([`$CC -dumpmachine 2>/dev/null`],
       [i?86-* | athlon-*], [ac_cv_sparse_target=x86],
       [x86_64-*], [ac_cv_sparse_target=x86_64],
       [ac_cv_sparse_target=other])])
   AS_CASE([$ac_cv_sparse_target],
     [x86], [SPARSEFLAGS= CGCCFLAGS=-target=i86],
     [x86_64], [SPARSEFLAGS=-m64 CGCCFLAGS=-target=x86_64],
     [SPARSEFLAGS= CGCCFLAGS=])
   AC_SUBST([SPARSEFLAGS])
   AC_SUBST([CGCCFLAGS])])

dnl OVS_SPARSE_EXTRA_INCLUDES
dnl
dnl The cgcc script from "sparse" does not search gcc's default
dnl search path. Get the default search path from GCC and pass
dnl them to sparse.
AC_DEFUN([OVS_SPARSE_EXTRA_INCLUDES],
    AC_SUBST([SPARSE_EXTRA_INCLUDES],
           [`$CC -v -E - </dev/null 2>&1 >/dev/null | sed -n -e '/^#include.*search.*starts.*here:/,/^End.*of.*search.*list\./s/^ \(.*\)/-I \1/p' |grep -v /usr/lib | grep -x -v '\-I /usr/include' | tr \\\n ' ' `] ))

dnl OVS_ENABLE_SPARSE
AC_DEFUN([OVS_ENABLE_SPARSE],
  [AC_REQUIRE([OVS_CHECK_SPARSE_TARGET])
   AC_REQUIRE([OVS_SPARSE_EXTRA_INCLUDES])
   : ${SPARSE=sparse}
   AC_SUBST([SPARSE])
   AC_CONFIG_COMMANDS_PRE(
     [CC='$(if $(C:0=),env REAL_CC="'"$CC"'" CHECK="$(SPARSE) $(SPARSE_WERROR) -I $(ovs_srcdir)/include/sparse $(SPARSEFLAGS) $(SPARSE_EXTRA_INCLUDES) " cgcc $(CGCCFLAGS),'"$CC"')'])

   AC_ARG_ENABLE(
     [sparse],
     [AC_HELP_STRING([--enable-sparse], [Run "sparse" by default])],
     [], [enable_sparse=no])
   AM_CONDITIONAL([ENABLE_SPARSE_BY_DEFAULT], [test $enable_sparse = yes])])

dnl OVS_CTAGS_IDENTIFIERS
dnl
dnl ctags ignores symbols with extras identifiers. This builds a list of
dnl specially handled identifiers to be ignored.
AC_DEFUN([OVS_CTAGS_IDENTIFIERS],
    AC_SUBST([OVS_CTAGS_IDENTIFIERS_LIST],
           [`printf %s '-I "'; sed -n 's/^#define \(OVS_[A-Z_]\+\)(\.\.\.)$/\1+/p' ${OVSDIR}/include/openvswitch/compiler.h  | tr \\\n ' ' ; printf '"'`] ))

dnl OVS_PTHREAD_SET_NAME
dnl
dnl This checks for three known variants of pthreads functions for setting
dnl the name of the current thread:
dnl
dnl   glibc: int pthread_setname_np(pthread_t, const char *name);
dnl   NetBSD: int pthread_setname_np(pthread_t, const char *format, void *arg);
dnl   FreeBSD: int pthread_set_name_np(pthread_t, const char *name);
dnl
dnl For glibc and FreeBSD, the arguments are just a thread and its name.  For
dnl NetBSD, 'format' is a printf() format string and 'arg' is an argument to
dnl provide to it.
dnl
dnl This macro defines:
dnl
dnl    glibc: HAVE_GLIBC_PTHREAD_SETNAME_NP
dnl    NetBSD: HAVE_NETBSD_PTHREAD_SETNAME_NP
dnl    FreeBSD: HAVE_PTHREAD_SET_NAME_NP
AC_DEFUN([OVS_CHECK_PTHREAD_SET_NAME],
  [AC_CHECK_FUNCS([pthread_set_name_np])
   if test $ac_cv_func_pthread_set_name_np != yes; then
     AC_CACHE_CHECK(
       [for pthread_setname_np() variant],
       [ovs_cv_pthread_setname_np],
       [AC_LINK_IFELSE(
         [AC_LANG_PROGRAM([#include <pthread.h>
  ], [pthread_setname_np(pthread_self(), "name");])],
         [ovs_cv_pthread_setname_np=glibc],
         [AC_LINK_IFELSE(
           [AC_LANG_PROGRAM([#include <pthread.h>
], [pthread_setname_np(pthread_self(), "%s", "name");])],
           [ovs_cv_pthread_setname_np=netbsd],
           [ovs_cv_pthread_setname_np=none])])])
     case $ovs_cv_pthread_setname_np in # (
       glibc)
          AC_DEFINE(
            [HAVE_GLIBC_PTHREAD_SETNAME_NP], [1],
            [Define to 1 if pthread_setname_np() is available and takes 2 parameters (like glibc).])
          ;; # (
       netbsd)
          AC_DEFINE(
            [HAVE_NETBSD_PTHREAD_SETNAME_NP], [1],
            [Define to 1 if pthread_setname_np() is available and takes 3 parameters (like NetBSD).])
          ;;
     esac
   fi])

dnl OVS_CHECK_LINUX_HOST.
dnl
dnl Checks whether we're building for a Linux host, based on the presence of
dnl the __linux__ preprocessor symbol, and sets up an Automake conditional
dnl LINUX based on the result.
AC_DEFUN([OVS_CHECK_LINUX_HOST],
  [AC_CACHE_CHECK(
     [whether __linux__ is defined],
     [ovs_cv_linux],
     [AC_COMPILE_IFELSE(
        [AC_LANG_PROGRAM([enum { LINUX = __linux__};], [])],
        [ovs_cv_linux=true],
        [ovs_cv_linux=false])])
   AM_CONDITIONAL([LINUX], [$ovs_cv_linux])])

dnl OVN_CHECK_OVS
dnl
dnl Check for OVS sources
AC_DEFUN([OVN_CHECK_OVS], [
  AC_ARG_WITH([ovs-source],
              [AC_HELP_STRING([--with-ovs-source=/path/to/ovs/src/dir],
                              [Specify the OVS src directory])])
  AC_ARG_WITH([ovs-build],
              [AC_HELP_STRING([--with-ovs-build=/path/to/ovs/build/dir],
                              [Specify the OVS build directory])])

  AC_MSG_CHECKING([for OVS source directory])
  if test X"$with_ovs_source" = X; then
    with_ovs_source="$srcdir/ovs"
  fi
  OVSDIR=$(cd "$(eval echo "$with_ovs_source")"; pwd)
  if test ! -f "$OVSDIR/vswitchd/bridge.c"; then
    AC_ERROR([$OVSDIR is not an OVS source directory])
  fi

  AC_MSG_RESULT([$OVSDIR])
  AC_SUBST(OVSDIR)

  AC_MSG_CHECKING([for OVS build directory])
  if test X"$with_ovs_build" != X; then
    OVSBUILDDIR=`eval echo "$with_ovs_build"`
    case $OVSBUILDDIR in
      /*) ;;
      *) OVSBUILDDIR=`pwd`/$OVSBUILDDIR ;;
    esac
    if test ! -f "$OVSBUILDDIR/config.h"; then
      AC_ERROR([$OVSBUILDDIR is not a configured OVS build directory])
    fi
  elif test -f "$OVSDIR/config.h"; then
    # If separate build dir is not specified, use src dir.
    OVSBUILDDIR=$OVSDIR
  else
    AC_ERROR([OVS source dir $OVSDIR is not configured as a build directory (either run configure there or use --with-ovs-build to point to the build directory)])
  fi
  AC_MSG_RESULT([$OVSBUILDDIR])
  AC_SUBST(OVSBUILDDIR)
  OVSVERSION=`sed -n 's/^#define PACKAGE_VERSION//p' $OVSBUILDDIR/config.h | tr \\\n ' ' | sed 's/^[ \t]*//;s/[ \t]*$//' | sed 's/\"//g'`
  AC_SUBST(OVSVERSION)
  AC_MSG_CHECKING([OVS version])
  AC_MSG_RESULT([$OVSVERSION])
])