checks.txt

procedureel										                   ready?
1. -> convergence behaviour local 						per run	                   JM:yes p:\1230058-os\swanmodel\TEST01\0prepare\ProcChecks\plconvergence.py
2. -> convergence behaviour global 						per run
3. -> presence of results (*.TAB, *.NC, *.SP1, *.SP2) &					                   JM:yes
      check *.prt (no errors), comp time < 3 hrs, number of iterations < 60, 
      (or it==60 & >99.5%)							one bulk list for a lot    p:\1230058-os\swanmodel\TEST01\0prepare\ProcChecks\checkbulk.py
      	


physical checks										per run					ready?
1. -> wet or dry output locations (4.2)							
2.    within realistic limits at output locations (4.3)					bulk plots, after all			less relevant			
3. -> minimum and maximum Hm0 and Tps and Tm01 per output location over all cases (4.4)	bulk plots, after all
4. -> consistency Hm0 and Tm01 as function of windspeed, winddir, water level (4.5)	bulk plots, after all			almost, please rename to: D338Lm200OOa_hs (?) etc, change x lim lower plot, done(JM)
5. -> spatial (entire domain) maps Hm0, Tps, dHs, dTm					per run (landscape; 2x2 subplots)       yes
6. -> spatial (detail) maps Hm0, Tps, dHs, dTm						per run                                 yes 
7. -> proper boundary conditions NZ at OSK, also for overtopping			per run and bulk plots after all	
8. -> proper boundary conditions OS at OSK						per run and bulk plots after all	almost; please rename to: D338OOa_tm D338OOa_hs etc, done(JM)
9. -> spectra NZ (5 OBS locations) and OS (6 OBS locations + 6 output locations)	per run (like A7.7; A.7.14.c)		JM: almost, cg: please add grid lines or only the horizontal zero line? and maybe less underscores in output filenames??, done(JM)



?      alle NZ rvw in 1 plot?
?      scatterplots Hm0 buiten vs Hm0 binnen; windsnelheid in kleur, waterstanden met elkaar verbonden lijnen
?      list with computational time for each run
?      per uitvoerlocatie (scatterplots): golfsteilheid vs golfhoogte, golfperiode en windsnelheid (fig 4.4)
                           golfperiode vs golfhoogte en windsnelheid (fig 4.5)   
			   brekerparameter vs golfhoogte, golfperiode en windsnelheid (fig 4.6)
       minimale en maximale waarde als functie van uitvoerlocatie (en dan in kleur de windsnelheid en marker windrichting?)