GE/Jasco 1274/ZW3003 Dimmer Switch Missing Manual Actuations

[CeasarPrime]

The problem

GE/Jasco 1274/ZW3003 (z wave) dimmer switches are connected to my Home Assistant instance running on a Raspberry Pi 4. Most, if not all, manual actuations of my three switches do not get reflected in Home Assistant. All changes initiated through the HA UI and automations are accurately reflected. It would appear that unsolicited changes in state of these devices are not getting to HA or HA is not processing these correctly. The Z-Wave JS folks have confirmed that the driver is seeing manual changes.

The issue is not with the devices themselves. I have used them previously on a VERA Edge hub and they worked fine there.

What version of Home Assistant Core has the issue?

core-2022.2.5

What was the last working version of Home Assistant Core?

these z wave devices have never worked properly when manually actuated

What type of installation are you running?

Home Assistant Supervised

Integration causing the issue

I do not believe this is a z wave integration issue. That has been checked.

Link to integration documentation on our website

zwave-js/node-zwave-js#4188

Diagnostics information

No response

Example YAML snippet

No response

Anything in the logs that might be useful for us?

No response

Additional information

No response

[probot-home-assistant]

Hey there @home-assistant/z-wave, mind taking a look at this issue as it has been labeled with an integration (zwave_js) you are listed as a code owner for? Thanks!
_{^{(message by CodeOwnersMention)}}

---

zwave_js documentation
zwave_js source
_{^{(message by IssueLinks)}}

[MartinHjelmare]

Please download diagnostics of your Z-Wave network and attach it as a text file here by dragging and dropping the file in a comment.

The diagnostics tool is available by clicking the three dots menu of the Z-Wave JS integration in the integrations page in the Home Assistant GUI.

The network diagnostics will help us troubleshoot your device.

Thanks!

[CeasarPrime]

config_entry-zwave_js-d7e4374b64cdf223fd69cc2e06859182.json (3).txt

I have attached the diagnostic text file as requested.

[DPB322]

I’m having the same issue. Some times I have hit the physical switch more than once to get it show up in HA.