CHANGELOG.md

Changelog

Older changelog entries (v1...v10)

11.10.1 (2023-08-14)

Bugfixes

• Change order of commands so the startup does not fail when a controller is already set to use 16-bit node IDs and soft-reset is disabled (#6153)
• Soft-reset is now always enabled on 700+ series controllers (#6154)
• Queried user codes and their status are now preserved during re-interview when they won't be re-queried automatically (#6152)

Config file changes

• Remove unnecessary endpoint functionality for CT101 (#6146)

Changes under the hood

• The mock-server now supports loading a directory of mocks (#6145)

11.10.0 (2023-08-10)

Features

• The controller identify event callback now includes a reference to the node that requested the identification (#6140)

Bugfixes

• When downloading a firmware file, the file extension of the final redirected URL is also considered (#6142)

Config file changes

• Add parameters 9-13 to Minoston MP21ZP / MP31ZP (#6139)
• Add fingerprint to Yale YRD446-ZW2 (#6135)
• Add and update Yale Assure ZW3 series locks (#6134)

11.9.2 (2023-08-08)

Bugfixes

• Fixed a regression from v11.9.1 where the startup process could stall after soft-reset when using certain pre-700 series controllers (#6132)

11.9.1 (2023-08-07)

Bugfixes

• Fixed a regression from v11.7.0 where the controller was incorrectly assumed to encode node IDs as 16-bit after a soft reset (#6130)
• Improve heuristic to refresh values from legacy nodes when receiving a node information frame (#6121)
• Fixed an issue where no control values were exposed for devices that do not support/advertise Version CC (#6123)

Config file changes

• Correct value size for some Nortek PD300EMZ5-1 params that were previously swapped (#6124)
• Add new MCOHome MH-S411/S412 models (#6120)

11.9.0 (2023-08-02)

Features

• Add getDateAndTime method to ZWaveNode (#6073)

Bugfixes

• Fixed an issue where turning on a Multilevel Switch with transition duration could update the currentValue to an illegal value (#6111)
• Fixed an issue where empty daily repeating schedules were encoded incorrectly in mocks (#6113)

Changes under the hood

• Support absolute config paths in mock-server (#6112)

11.8.1 (2023-08-01)

Bugfixes

• Recover from Security S2 collisions in a common scenario where nodes send a supervised command at the same time Z-Wave JS is trying to control them (#6106)
• During NVM migration, an incorrect flag for "on other network" is now automatically corrected instead of raising an error (#6108)

Config file changes

• Preserve endpoint 0 for Zooz ZEN14 to toggle both outlets at once (#6099)

Changes under the hood

• Fixed the message sequencing between mock controller and mock nodes in integration tests and the mock-server (#6101)

11.8.0 (2023-07-28)

Features

• Health checks now include the intermediate results in progress callbacks (#6086)
• Added the ability to abort health checks and testing whether a health check is in progress (#6091)

Bugfixes

• When a CC version query times out, the CC version is now actually assumed to be 1 instead of only logging this (#6089)

Config file changes

• Correct state after power failure for Minoston MP21Z/31Z (#6087)
• Add Namron 4512757 (#6072)

11.7.0 (2023-07-27)

Features

• Add methods to read sensor/meter support information from cache for Alarm/Binary/Multilevel Sensor CC and Meter CC (#6065)
• Fall back to the embedded config directory when looking up $import targets from user-defined config files (#6067)

Bugfixes

• Fixed an issue where a delayed endpoint capability report could be associated with the wrong query (#6076)
• During NVM migration, some invalid/unexpected bytes in the 500 series NVM can now be corrected (#6082)
• Hide configuration values for Door Lock CC v4 functionality that is not supported by a lock (#6075)

Config file changes

• Add Leviton RZM10-1L (#6080)
• Force use of Multi Channel CC v1 for all versions of PE653 (#6077)

Changes under the hood

• Enable 16-bit node IDs in Serial API communication (#6070)
• Fix link in v11 Migration guide (#6071)

11.6.0 (2023-07-24)

Features

• Setting the date and time on a node will now also attempt sending unsolicited Time CC reports if no other way is supported (#6042)

Bugfixes

• Fixed an issue where auto-discovered config parameters could create non-existing partial parameters (#6059)
• Auto-discovered config parameters that are missing from a config file are now preserved and exposed to applications. These can be distinguished from known parameters by checking the isFromConfig metadata property (#6058)
• Fixed an issue where config parameter metadata from a config file could be overridden with auto-discovered information (#6060)
• Fixed a regression where unsuccessful pings to sleeping nodes would not resolve. Among other things, this could prevent the remove failed node function from working (#6064)

Config file changes

• Add new product id to Fakro ZWS12 (#6027)
• Disable Supervision for NICE Spa IBT4ZWAVE (#6050)
• Add variant of Inovelli NZW31T with manufacturer ID 0x015d (#6057)
• Split and correct Minoston MP21Z/MP31Z/MP21ZP/MP31ZP config files (#6056)
• Add EVA LOGIK (NIE Tech) ZKS31 Rotary Dimmer (#5877)

Changes under the hood

• Added a section to the documentation that explains how to use custom log transports (#6061)

11.5.3 (2023-07-20)

Bugfixes

• Throw when trying to heal or discover neighbors for the controller (#6043)

Config file changes

• Correct parameters of Zooz ZEN05 (#6045)
• Override supported setpoint types for Intermatic PE653 (#6044)
• Update Inovelli LZW31 parameter 52 for FW 1.54 (#6001)

Changes under the hood

• Implement mocks for Basic CC (#6041)

11.5.2 (2023-07-19)

Bugfixes

• Fixed an issue where partial param values were not exposed correctly (#6035)
• When a device unnecessarily sends a supervised GET request, the response is no longer sent with Supervision (#6034)
• Fixed another regression from v11.2.0 where some time-critical requests weren't answered while waiting for a response from a different node (#6024)

Config file changes

• Fix Zooz ZSE40 parameters 7 and 8 (#6019)

Changes under the hood

• Reworked how build caching is done (#6040)

11.5.1 (2023-07-18)

Bugfixes

• Fixed an infinite loop that could happen when parsing 4-byte bitfield config parameters where the high bit is set (#6029)
• Allow associations between insecure devices which support the latest (Multi Channel) Association CC (#6011)

11.5.0 (2023-07-17)

Features

• Add lastSeen property to node and node statistics (#6008)
• Make ZWaveNode events available via the Driver (#6002)

Bugfixes

• Handle when the controller sends a reserved status code after failed exclusion (#6004)
• Fixed a regression from v11.2.0 where a node's S0 nonce requests weren't answered during a Get-Report command flow (#6024)

Config file changes

fix(config): add new fingerprint for Zooz ZST10-700 (#6022)

Changes under the hood

• Add mocks for User Code CC and Schedule Entry Lock CC (#6023)
• Add mocks for Manufacturer Specific, Thermostat Mode and Thermostat Setpoint CC (#6013)

11.4.2 (2023-07-11)

Config file changes

• Add Heatit ZM Dimmer (#5999)
• Add Heatit Z-HAN2 (#5998)
• Add Remotec ZXT-800 (#5955)
• Clarify Hand Button action for ZVIDAR Z-CM-V01 Smart Curtain Motor (#5946)
• Add MCOHome MH-S220 FW 3.2 (#5832)
• Add another device ID for Switch IO On/Off Power Switch (#5801)
• Add/fix params for Intermatic PE653 (#5822)
• Add ShenZhen Sunricher Technology Multisensor SR-ZV9032A-EU (#5718)

Changes under the hood

• The commandClasses.add/remove compat flags now support specifying the CC name instead of its hexadecimal ID (#6000)

11.4.1 (2023-07-10)

Config file changes

• Add missing product type to Aeotec Water Sensor 7 Basic ZWA018 (#5989)
• Override endpoint indizes for heatapp! floor (#5994)
• Override schedule slot count for P-KFCON-MOD-YALE (#5991)
• Override supported color channels for Zipato RGBW Bulb2 (#5993)
• Override supported thermostat modes for Z-Wave.me ZME_FT (#5997)

Changes under the hood

• Fixed a typo in the discoverNodeNeighbors JSDoc (#5984)
• Added Node.js 20 to the test matrix (#5983)
• Added a compat flag to override (almost) arbitrary CC API queries (#5987, #5995)
• Added the yarn configfind ... CLI command to quickly find a config file by ID

11.4.0 (2023-07-06)

Features

• Added the ability to assign priority return routes along with custom fallbacks (#5980)

11.3.0 (2023-07-06)

Features

• Add zwaveDataRateToString method (#5978)

Config file changes

• Disable Window Covering CC for ZVIDAR Roller Blind (#5976)

Changes under the hood

• Upgrade to TypeScript 5.1.6 (#5977)

11.2.0 (2023-07-05)

Features

• The withTXReport proxy now has the setValue and pollValue methods available (#3735)

Bugfixes

• When checking incoming S2-encapsulated commands for duplicates, only the last command is now considered (#5967)
• Incoming multicast SupervisionCC::Get commands are no longer answered (#5973)
• Automatically use ...SUC... variant when assigning custom/priority return routes with the controller as the destination (#5972)
• Clear cached custom SUC return routes after assigning a priority SUC return route (#5970)
• Ignore Transport Service and CRC16 encapsulation when checking if a command is received at a lower-than-expected security level (#5966)
• Respond to Inclusion Controller CC commands without requiring support (#5949)

Config file changes

• Update Swidget devices to match their June 8th 2023 spec (#5956)
• Add endpoint configuration parameters to SES 302 (#5954)

Changes under the hood

• Upgrade to TypeScript 5.1 (#5950)
• Most state machines involved with sending commands have been removed. Queue handling is now done entirely in the driver, making it easier to follow and debug. (#5958)
• Add logging for Energy Production CC (#5951)

11.1.0 (2023-06-26)

Features

• The ThermostatModeCC.set API now accepts manufacturerData as a hex string instead of just a Buffer (#5929)
• Support responding to "identify" commands (#5934)
• An API for discovering neighbors is now available to applications (#5938)
• Added support for assigning custom return routes and reading previously set priority return routes from cache (#5941)

Bugfixes

• Allow other devices to configure a single lifeline to receive factory reset notifications (#5931)
• Simplified the interview process to contain a sequence that was previously done before the actual interview (#5936)
• During network heals, routes to all association destinations are now assigned, instead of just 4 (#5938)

Config file changes

• Remove unnecessary endpoints for RTC CT32 (#5927)

11.0.0 (2023-06-19) · „I'm on the highway to hell certification...”

Application compatibility

Home Assistant users who manage zwave-js-server themselves, must install the following upgrades before upgrading to this driver version:

• Home Assistant 2023.6.0 or higher
• zwave-js-server 1.29.0

Breaking changes · Migration guide

• Hide Multilevel Switch CC in favor of Window Covering CC (#5812)
• Improve return type of firmwareUpdateOTA and firmwareUpdateOTW methods (#5815)
• Rename some ZWaveHost interface methods (#5814)
• Remove deprecated method signatures, enums and properties (#5816)
• Support configuration parameters on endpoints (#5818)
• Removed preserveUnknownValues driver option, distinguish between (known to be) unknown and not (yet) known states/values (#5843)
• Auto-discovered BitField config params are now represented as partial params (#5870)
• Change return type of setValue to include context on the execution result (#5897)
• Changed "node removed" event callback to specify why a node was removed (#5920)

Bugfixes

• Auto-remove nodes when they leave the network after failed SmartStart bootstrapping (#5922)

Config file changes

• Hide Binary Switch CC in favor of Window Covering CC on iBlinds v3 (#5912)