Skip to content
This repository has been archived by the owner on Jan 4, 2025. It is now read-only.

Latest commit

 

History

History
50 lines (32 loc) · 2.81 KB

README_restore.md

File metadata and controls

50 lines (32 loc) · 2.81 KB

Introduction | Setup | Backup | Restore | Switch firmware | Other options | Screenshots | Build | FAQs | Changelog | Limitation

❗ WARNING:

  • DO NOT DISCONNECT POWER when the Restore operation is going on. This would soft brick your camera.

Overview

The Restore operation allows restoring one or more partitions using partition images. You can decide what partitions will be restored.

This operation is used to restore the partitions of the firmware your camera CURRENTLY has. If you are using thingino and want to roll back to stock firmware, and vice versa, please do the Switch firmware operation instead.

Guide

Step 1: Setup

Step 2: Place your partition restore images along with their .sha256sum files under the wz_flash-helper/restore/[firmware]/ directory on your SD card. They should have this format:

  • [firmware]_[SoC]_[partition name].bin for partition restore images.
  • [firmware]_[SoC]_[partition name].bin.sha256sum for their .sha256sum files.

If you want to restore partitions using custom partition images, you have to generate .sha256sum files using this guide

Example for stock restore images on t31x:

Alt text

Step 3: Edit [firmware].conf under the wz_flash-helper/restore/ directory on your SD card to select what partitions will be restored:

Step 4: Edit general.conf to enable the Restore operation:

switch_firmware="no"
restore_partitions="yes"

Step 5: Insert your SD card into your camera and power on. Wait for the program to finish restoring the partitions. After it is finished, your camera will reboot.

Notes

  • For the Restore operation to start, the switch_firmware option must be disabled. If both the restore_partitions and switch_firmware options are enabled, the Restore operation will fail.
  • All partition restore images must come with their .sha256sum files for integrity verification.
  • During the Restore operation, the red LED would be blinking every second.
  • Typically, the Restore operation takes about 2 minutes if all partitions are selected (excluding load time).

Restore the boot partition

❗ WARNING: Doing this might brick your camera, only do when you know what you are doing.

To restore the boot partition, add this hidden option to [firmware].conf under the wz_flash-helper/restore/[firmware]/ directory:

hidden_option_restore_boot="yes"