This is a controller that controls the Zehnder Stork Comfofan S Hygro mechanical ventilation.
- Board: DOIT ESP32 DEVKIT V1
- NRF905 transceiver module
| Board | NRF905 |
|---|---|
| D15 / GPIO15 | CS |
| D32 / GPIO32 | AM |
| D33 / GPIO33 | CD |
| D27 / GPIO27 | CE |
| D35 / GPIO35 | DR |
| D26 / GPIO26 | PWR |
| D25 / GPIO25 | TXEN |
| GND | GND |
| 3V3 | VCC |
The device configuration can be found in mechanische_ventilatie.yaml
The following components are required to be installed:
This configuration requires the following secrets to be defined in your secrets.yaml
wifi_ssid: wifi_name
wifi_password: wifi_password
ap_password: access_point_password
gateway: 192.168.0.1
subnet: 255.255.255.0
mechanische_ventilatie_static_ip: 192.168.0.123
mechanische_ventilatie_ota_password: ota_password
mechanische_ventilatie_encryption_key: abcdefghijklmnopqrstuvwxyz1234567890ABCDEFG=