x-axis.cfg

[mcu x-axis]
canbus_uuid: 08ddc1a55a1a # run the following command to locate the uuid >   ~/klippy-env/bin/python ~/klipper/scripts/canbus_query.py can0

[board_pins EBB42_G0B1_v1.2]
mcu: x-axis
aliases:
aliases_step:
    EXT_EN=PD2,EXT_STEP=PD0,EXT_DIR=PD1,EXT_UART=PA15
aliases_limitsw: # these are preferred for endstops (including klicky)
    LIMIT_1=PB7,LIMIT_2=PB5,LIMIT_3=PB6
aliases_bltouch: # these are the dupont connectors for bltouch
    PROBE_1=PB9,PROBE_2=PB8
aliases_fans:
    FAN0=PA1,FAN1=PA0
aliases_thermistors:
    TH0=PA3,PT100_CS=PA4,PT100_SCLK=PA5,PT100_MISO=PA6,PT100_MOSI=PA7
aliases_heaters:
    HE0=PB13
aliases_rgb:
    RGBLED=PD3
aliases_adxl:
    ADXL_CS=PB12,ADXL_SCLK=PB10,ADXL_MISO=PB2,ADXL_MOSI=PB11
aliases_i2c:
    AUX0=PB3,AUX1=PB4

[tmc2209 stepper_x]
uart_pin: x-axis:EXT_UART
run_current: 0.8
hold_current: 0.6
stealthchop_threshold: 999999

[stepper_x]
step_pin: x-axis:EXT_STEP
dir_pin: !x-axis:EXT_DIR
enable_pin: !x-axis:EXT_EN
microsteps: 16
rotation_distance: 40
endstop_pin: x-axis:LIMIT_3
position_endstop: -30
position_max: 260
position_min: -30
homing_retract_dist: 0
homing_speed: 50

[temperature_sensor x-axis_board]
sensor_type: temperature_mcu
sensor_mcu: x-axis

[temperature_sensor chamber]
sensor_pin: x-axis:TH0
sensor_type: NTC 100K MGB18-104F39050L32