Skip to content

Latest commit

 

History

History
26 lines (16 loc) · 1.51 KB

README.md

File metadata and controls

26 lines (16 loc) · 1.51 KB

victron-json-mppt

Python DBUS json mppt solar charger scripts for VenusOS.

Tested on RPi 3 CCGX

Tested on RPi 4 CCGX With python 3 and Venus_OS 3.10

Publishes an MPPT solarcharger on the DBUS based on the dbus definitions here: https://github.com/victronenergy/venus/wiki/dbus#solar-chargers

Both scripts run on startup on the CCGX https://www.victronenergy.com/live/ccgx:root_access#hooks_to_install_run_own_code_at_boot.

example rc.local: su root -c "screen -dm -S epever-dbus ~/dbus-service.py" su root -c "screen -dm -S epever-dbus ~/dbus-values.py"

Why?

I have an Epever Tracer MPPT which I needed to integrate with my victron multiplus & CCGX. I didnt want to spend lots of money on a new mppt when my current one works fine (it just doesn't communicate with the victron software)

Initially I tried getting the Tracer MPPT readings directly on the CCGX but turns out modbus would crash a lot and the Epever MPPT wasn't happy with the high rate of readings required to run the service well on DBUS.

Known issues:

This script 100% relies on keeping the remote json file up to date. I run a separate script every 60 seconds to grab the required modbus values from my Tracer MPPT and publish them to a json file. On smaller arrays, solar isn't likely to fluctuate massively within 60 seconds so an average is fine. This process is stable and that's what counts.

Special thanks:

I started with this script as a base for how to get it working with CCGX: https://github.com/CarlosBornay/venus-bornaywind