path: general.host
default: "0.0.0.0"
What IP to run on, 0.0.0.0 means accessible from everywhere.
path: general.port
default: 6432
Port to run on, same as PgBouncer used in this example.
path: general.enable_prometheus_exporter
default: true
Whether to enable prometheus exporter or not.
path: general.prometheus_exporter_port
default: 9930
Port at which prometheus exporter listens on.
path: general.connect_timeout
default: 5000 # milliseconds
How long to wait before aborting a server connection (ms).
path: general.idle_timeout
default: 30000 # milliseconds
How long an idle connection with a server is left open (ms).
path: general.server_lifetime
default: 86400000 # 24 hours
Max connection lifetime before it's closed, even if actively used.
path: general.server_round_robin
default: false
Whether to use round robin for server selection or not.
path: general.server_tls
default: false
Whether to use TLS for server connections or not.
path: general.verify_server_certificate
default: false
Whether to verify server certificate or not.
path: general.verify_config
default: true
Whether to verify config or not.
path: general.idle_client_in_transaction_timeout
default: 0 # milliseconds
How long a client is allowed to be idle while in a transaction (ms).
path: general.healthcheck_timeout
default: 1000 # milliseconds
How much time to give the health check query to return with a result (ms).
path: general.healthcheck_delay
default: 30000 # milliseconds
How long to keep connection available for immediate re-use, without running a healthcheck query on it
path: general.shutdown_timeout
default: 60000 # milliseconds
How much time to give clients during shutdown before forcibly killing client connections (ms).
path: general.ban_time
default: 60 # seconds
How long to ban a server if it fails a health check (seconds).
path: general.log_client_connections
default: false
If we should log client connections
path: general.log_client_disconnections
default: false
If we should log client disconnections
path: general.autoreload
default: 15000 # milliseconds
When set, PgCat automatically reloads its configurations at the specified interval (in milliseconds) if it detects changes in the configuration file. The default interval is 15000 milliseconds or 15 seconds.
path: general.worker_threads
default: 5
Number of worker threads the Runtime will use (4 by default).
path: general.tcp_keepalives_idle
default: 5
Number of seconds of connection idleness to wait before sending a keepalive packet to the server.
path: general.tcp_keepalives_count
default: 5
Number of unacknowledged keepalive packets allowed before giving up and closing the connection.
path: general.tcp_keepalives_interval
default: 5
path: general.tcp_user_timeout
default: 10000
A linux-only parameters that defines the amount of time in milliseconds that transmitted data may remain unacknowledged or buffered data may remain untransmitted (due to zero window size) before TCP will forcibly disconnect
path: general.tls_certificate
default: <UNSET>
example: "server.cert"
Path to TLS Certificate file to use for TLS connections
path: general.tls_private_key
default: <UNSET>
example: "server.key"
Path to TLS private key file to use for TLS connections
path: general.admin_username
default: "admin_user"
User name to access the virtual administrative database (pgbouncer or pgcat)
Connecting to that database allows running commands like SHOW POOLS, SHOW DATABASES, etc..
path: general.admin_password
default: "admin_pass"
Password to access the virtual administrative database
path: general.auth_query
default: <UNSET>
example: "SELECT $1"
Query to be sent to servers to obtain the hash used for md5 authentication. The connection will be established using the database configured in the pool. This parameter is inherited by every pool and can be redefined in pool configuration.
path: general.auth_query_user
default: <UNSET>
example: "sharding_user"
User to be used for connecting to servers to obtain the hash used for md5 authentication by sending the query
specified in auth_query_user. The connection will be established using the database configured in the pool.
This parameter is inherited by every pool and can be redefined in pool configuration.
path: general.auth_query_password
default: <UNSET>
example: "sharding_user"
Password to be used for connecting to servers to obtain the hash used for md5 authentication by sending the query
specified in auth_query_user. The connection will be established using the database configured in the pool.
This parameter is inherited by every pool and can be redefined in pool configuration.
path: general.dns_cache_enabled
default: false
When enabled, ip resolutions for server connections specified using hostnames will be cached
and checked for changes every dns_max_ttl seconds. If a change in the host resolution is found
old ip connections are closed (gracefully) and new connections will start using new ip.
path: general.dns_max_ttl
default: 30
Specifies how often (in seconds) cached ip addresses for servers are rechecked (see dns_cache_enabled).
path: pools.<pool_name>.pool_mode
default: "transaction"
Pool mode (see PgBouncer docs for more).
session one server connection per connected client
transaction one server connection per client transaction
path: pools.<pool_name>.load_balancing_mode
default: "random"
Load balancing mode
random selects the server at random
loc selects the server with the least outstanding busy connections
path: pools.<pool_name>.default_role
default: "any"
If the client doesn't specify, PgCat routes traffic to this role by default.
any round-robin between primary and replicas,
replica round-robin between replicas only without touching the primary,
primary all queries go to the primary unless otherwise specified.
path: general.prepared_statements_cache_size
default: 0
Size of the prepared statements cache. 0 means disabled. TODO: update documentation
path: pools.<pool_name>.query_parser_enabled
default: true
If Query Parser is enabled, we'll attempt to parse every incoming query to determine if it's a read or a write. If it's a read query, we'll direct it to a replica. Otherwise, if it's a write, we'll direct it to the primary.
path: pools.<pool_name>.primary_reads_enabled
default: true
If the query parser is enabled and this setting is enabled, the primary will be part of the pool of databases used for load balancing of read queries. Otherwise, the primary will only be used for write queries. The primary can always be explicitly selected with our custom protocol.
path: pools.<pool_name>.sharding_key_regex
default: <UNSET>
example: '/\* sharding_key: (\d+) \*/'
Allow sharding commands to be passed as statement comments instead of separate commands. If these are unset this functionality is disabled.
path: pools.<pool_name>.sharding_function
default: "pg_bigint_hash"
So what if you wanted to implement a different hashing function,
or you've already built one and you want this pooler to use it?
Current options:
pg_bigint_hash: PARTITION BY HASH (Postgres hashing function)
sha1: A hashing function based on SHA1
path: pools.<pool_name>.auth_query
default: <UNSET>
example: "SELECT $1"
Query to be sent to servers to obtain the hash used for md5 authentication. The connection will be established using the database configured in the pool. This parameter is inherited by every pool and can be redefined in pool configuration.
path: pools.<pool_name>.auth_query_user
default: <UNSET>
example: "sharding_user"
User to be used for connecting to servers to obtain the hash used for md5 authentication by sending the query
specified in auth_query_user. The connection will be established using the database configured in the pool.
This parameter is inherited by every pool and can be redefined in pool configuration.
path: pools.<pool_name>.auth_query_password
default: <UNSET>
example: "sharding_user"
Password to be used for connecting to servers to obtain the hash used for md5 authentication by sending the query
specified in auth_query_user. The connection will be established using the database configured in the pool.
This parameter is inherited by every pool and can be redefined in pool configuration.
path: pools.<pool_name>.automatic_sharding_key
default: <UNSET>
example: "data.id"
Automatically parse this from queries and route queries to the right shard!
path: pools.<pool_name>.idle_timeout
default: 40000
Idle timeout can be overwritten in the pool
path: pools.<pool_name>.connect_timeout
default: 3000
Connect timeout can be overwritten in the pool
path: pools.<pool_name>.users.<user_index>.username
default: "sharding_user"
PostgreSQL username used to authenticate the user and connect to the server
if server_username is not set.
path: pools.<pool_name>.users.<user_index>.password
default: "sharding_user"
PostgreSQL password used to authenticate the user and connect to the server
if server_password is not set.
path: pools.<pool_name>.users.<user_index>.server_username
default: <UNSET>
example: "another_user"
PostgreSQL username used to connect to the server.
path: pools.<pool_name>.users.<user_index>.server_password
default: <UNSET>
example: "another_password"
PostgreSQL password used to connect to the server.
path: pools.<pool_name>.users.<user_index>.pool_size
default: 9
Maximum number of server connections that can be established for this user The maximum number of connection from a single Pgcat process to any database in the cluster is the sum of pool_size across all users.
path: pools.<pool_name>.users.<user_index>.statement_timeout
default: 0
Maximum query duration. Dangerous, but protects against DBs that died in a non-obvious way. 0 means it is disabled.
path: pools.<pool_name>.shards.<shard_index>.servers
default: [["127.0.0.1", 5432, "primary"], ["localhost", 5432, "replica"]]
Array of servers in the shard, each server entry is an array of [host, port, role]
path: pools.<pool_name>.shards.<shard_index>.mirrors
default: <UNSET>
example: [["1.2.3.4", 5432, 0], ["1.2.3.4", 5432, 1]]
Array of mirrors for the shard, each mirror entry is an array of [host, port, index of server in servers array]
Traffic hitting the server identified by the index will be sent to the mirror.
path: pools.<pool_name>.shards.<shard_index>.database
default: "shard0"
Database name (e.g. "postgres")