Skip to content

Latest commit

 

History

History
41 lines (29 loc) · 1.65 KB

README.md

File metadata and controls

41 lines (29 loc) · 1.65 KB
Raw


3D Printed L-ATM Case PE-Edition

Below files can be used to print a case, which lowers your overall costs. The models can be printed without any supports.

This is the first version and is designed to be used with inserts to mount the Coin-Acceptor as well as the Rasbperry-Pi Zero. For the Coin Acceptor use M3 inserts (Amazon), for the Raspberry-Pi M2.5 (Amazon) inserts are needed. The Lids holds by friction fit.

For the case needed are 3 Parts:

  • Shell

  • Back Lid

    • two versions
      • normal with 2mm thick plate
      • thicker with 3mm thick plate

  • Top Lid

    • there are two separate versions:
      • with Lightning-Logo, for dual color print add a color change at Z 3.00 mm.
      • without any logo

  • Mounting Rim

    • optional but recommended to properly glue the Top Lid onto the Back Lid.

  1. Print Shell / Back Lid / Top Lid / Mounting Rim

  2. Use soldering iron to:

    1. Add M3 Inserts into Coin Acceptor holes
    2. Add M2.5 Inserts into Raspberry holes



  3. If you have printed the Mounting Rim put it around the BackLid

  4. put glue on the Top Lid and use something to press both together

5. this is what it should look like without the rim