Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

进行CE认证时,使用ESP32S3_wifi_Adaptivity&Blocking_20230328.bin固件烧到到ESP32-S3-WROOM-2模组时报错 (IDFGH-14210) #15007

Open
3 tasks done
chen-pine opened this issue Dec 10, 2024 · 0 comments
Assignees
Labels
Status: Opened Issue is new Type: Bug bugs in IDF

Comments

@chen-pine
Copy link

Answers checklist.

  • I have read the documentation ESP-IDF Programming Guide and the issue is not addressed there.
  • I have updated my IDF branch (master or release) to the latest version and checked that the issue is present there.
  • I have searched the issue tracker for a similar issue and not found a similar issue.

IDF version.

未知

Espressif SoC revision.

ESP32-S3-WROOM-2

Operating System used.

Windows

How did you build your project?

VS Code IDE

If you are using Windows, please specify command line type.

None

Development Kit.

定制版

Power Supply used.

Battery

What is the expected behavior?

在进行 Adaptive WIFI测试时,ESP32-S3-WROOM-1U模组可以连接到AP,

What is the actual behavior?

在进行 Adaptive WIFI测试时,无法成功连接到AP,也无法响应命令,日志显示该模组在重启报错,以下是报错的日志

  • E (674) phy_init: failed to validate PHY data partition
  • E (684) phy_init: failed to obtain PHY init data
  • This is the first time SSC runs after erasing NVS.
  • abort() was called at PC 0x4208f347 on core 0

Steps to reproduce.

  1. 链接到ESP32 S3模组
  2. 烧录固件 ESP32S3_wifi_Adaptivity&Blocking_20230328.bin
  3. 选中WiFi Adaptive
  4. connect ap
  5. 显示命令失败
    ...

Debug Logs.

[10:55:36.398] I (70) boot: ## Label            Usage         
[10:55:36.404]  Type ST Offset   Length
[10:55:36.404] I (77) boot:  0 nvs        
[10:55:36.409]       WiFi data        01 02 00009000 00006000
[10:55:36.409] I (84
[10:55:36.416] ) boot:  1 phy_init         RF data          01 01 0000f000 0000
[10:55:36.421] 1000
[10:55:36.421] I (92) boot:  2 factory          factory app   
[10:55:36.427]    00 00 00010000 001b0000
[10:55:36.427] I (99) boot:  3 wpa2_cer 
[10:55:36.432]         Unknown data     01 ff 001c0000 00004000
[10:55:36.432] I (
[10:55:36.438] 107) boot:  4 wpa2_key         Unknown data     01 ff 001c4000 0
[10:55:36.443] 0004000
[10:55:36.443] I (114) boot:  5 wpa2_ca          Unknown da
[10:55:36.449] ta     01 ff 001c8000 00004000
[10:55:36.449] I (122) boot: End of 
[10:55:36.454] partition table
[10:55:36.454] I (126) boot_comm: chip revision: 1,
[10:55:36.459]  min. application chip revision: 0
[10:55:36.459] I (133) esp_image
[10:55:36.465] : segment 0: paddr=00010020 vaddr=3c0b0020 size=1e9d0h (125392) 
[10:55:36.468] map
[10:55:36.490] I (171) esp_image: segment 1: paddr=0002e9f8 vaddr=3fc97f
[10:55:36.496] 30 size=01620h (  5664) load
[10:55:36.496] I (173) esp_image: segm
[10:55:36.501] ent 2: paddr=00030020 vaddr=42000020 size=ae0b4h (712884) map�[0
[10:55:36.503] m
[10:55:36.664] I (345) esp_image: segment 3: paddr=000de0dc vaddr=3fc995
[10:55:36.668] 50 size=0462ch ( 17964) load
[10:55:36.668] I (350) esp_image: segm
[10:55:36.675] ent 4: paddr=000e2710 vaddr=40374000 size=13f2ch ( 81708) load�[
[10:55:36.677] 0m
[10:55:36.700] I (381) boot: Loaded app from partition at offset 0x10000
[10:55:36.705] 
[10:55:36.705] I (381) boot: Disabling RNG early entropy source...
[10:55:36.711] 
[10:55:36.711] I (393) cpu_start: Pro cpu up.
[10:55:36.711] I (393) 
[10:55:36.717] cpu_start: Starting app cpu, entry point is 0x40375408
[10:55:36.717] �[0;
[10:55:36.723] 32mI (365) cpu_start: App cpu up.
[10:55:36.723] I (407) cpu_start:
[10:55:36.728]  Pro cpu start user code
[10:55:36.728] I (407) cpu_start: cpu freq
[10:55:36.733] : 160000000
[10:55:36.733] I (407) cpu_start: Application informati
[10:55:36.740] on:
[10:55:36.740] I (410) cpu_start: Project name:     ssc
[10:55:36.740] �[
[10:55:36.744] 0;32mI (414) cpu_start: App version:      v4.4.2-72-gde784f2a�[0
[10:55:36.750] m
[10:55:36.750] I (420) cpu_start: Compile time:     Mar 28 2023 13:04
[10:55:36.756] :23
[10:55:36.756] I (427) cpu_start: ELF file SHA256:  8d3588edb18
[10:55:36.761] ffe85...
[10:55:36.761] I (432) cpu_start: ESP-IDF:          v4.4.4
[10:55:36.767] 
[10:55:36.767] I (438) heap_init: Initializing. RAM available for 
[10:55:36.773] dynamic allocation:
[10:55:36.773] I (445) heap_init: At 3FCA2BE8 l
[10:55:36.778] en 00046B28 (282 KiB): D/IRAM
[10:55:36.778] I (451) heap_init: At 
[10:55:36.783] 3FCE9710 len 00005724 (21 KiB): STACK/DRAM
[10:55:36.783] I (458) h
[10:55:36.789] eap_init: At 3FCF0000 len 00008000 (32 KiB): DRAM
[10:55:36.789] I 
[10:55:36.794] (464) heap_init: At 600FE000 len 00002000 (8 KiB): RTCRAM
[10:55:36.794] �
[10:55:36.799] [0;32mI (471) spi_flash: detected chip: mxic
[10:55:36.799] W (475)
[10:55:36.806]  spi_flash: Detected flash size > 16 MB, but access beyond 16 MB
[10:55:36.811]  is not supported for this flash model yet.
[10:55:36.811] I (486) 
[10:55:36.817] spi_flash: flash io: dio
[10:55:36.817] W (490) spi_flash: Detected
[10:55:36.823]  size(32768k) larger than the size in the binary image header(20
[10:55:36.827] 48k). Using the size in the binary image header.
[10:55:36.827] I (
[10:55:36.833] 504) sleep: Configure to isolate all GPIO pins in sleep state�[0
[10:55:36.839] m
[10:55:36.839] I (510) sleep: Enable automatic switching of GPIO slee
[10:55:36.845] p configuration
[10:55:36.845] I (517) esp_core_dump_uart: Init cor
[10:55:36.850] e dump to UART
[10:55:36.850] ��>I (544) uart: queue free spaces:
[10:55:36.853]  10
[10:55:36.873] This is the first time SSC runs after erasing NVS.
[10:55:36.873] I (56
[10:55:36.878] 4) pp: pp rom version: e7ae62f
[10:55:36.878] I (564) net80211: net
[10:55:36.884] 80211 rom version: e7ae62f
[10:55:36.884] I (574) wifi:wifi driver task: 3
[10:55:36.890] fcf7ce0, prio:23, stack:6656, core=0
[10:55:36.890] I (574) system_api:
[10:55:36.894]  Base MAC address is not set
[10:55:36.894] I (574) system_api: rea
[10:55:36.900] d default base MAC address from EFUSE
[10:55:36.900] I (584) wifi:wifi fir
[10:55:36.906] mware version: 6567a16
[10:55:36.906] I (584) wifi:wifi certification version:
[10:55:36.911]  v7.0
[10:55:36.911] I (584) wifi:config NVS flash: enabled
[10:55:36.911] I (594) wifi:conf
[10:55:36.917] ig nano formating: disabled
[10:55:36.917] I (594) wifi:Init data frame dynami
[10:55:36.923] c rx buffer num: 32
[10:55:36.923] I (604) wifi:Init management frame dynamic 
[10:55:36.928] rx buffer num: 32
[10:55:36.928] I (604) wifi:Init management short buffer num
[10:55:36.934] : 32
[10:55:36.934] I (614) wifi:Init dynamic tx buffer num: 32
[10:55:36.934] I (614) wifi:
[10:55:36.940] Init static tx FG buffer num: 2
[10:55:36.940] I (614) wifi:Init static rx buf
[10:55:36.945] fer size: 1600
[10:55:36.945] I (624) wifi:Init static rx buffer num: 10
[10:55:36.945] I (6
[10:55:36.950] 24) wifi:Init dynamic rx buffer num: 32
[10:55:36.950] I (634) wifi_ini
[10:55:36.956] t: tcpip mbox: 32
[10:55:36.956] I (634) wifi_init: udp mbox: 6
[10:55:36.961] 
[10:55:36.961] I (634) wifi_init: tcp mbox: 6
[10:55:36.961] I (644) wifi
[10:55:36.967] _init: tcp tx win: 5744
[10:55:36.967] I (644) wifi_init: tcp rx wi
[10:55:36.973] n: 5744
[10:55:36.973] I (654) wifi_init: tcp mss: 1440
[10:55:36.973] �[0;32
[10:55:36.978] mI (654) wifi_init: WiFi IRAM OP enabled
[10:55:36.978] I (654) wif
[10:55:36.984] i_init: WiFi RX IRAM OP enabled
[10:55:36.984] I (664) wifi:Set ps type: 1
[10:55:36.989] 
[10:55:36.989] 
[10:55:36.989] 
[10:55:36.989] NOBLK:0,TIMEOUT:0,1,0
[10:55:36.989] 
[10:55:36.989] I (674) phy_init: phy_vers
[10:55:36.995] ion 540,a5d905b,Oct 20 2022,19:36:11
[10:55:36.995] E (674) phy_ini
[10:55:37.001] t: failed to validate PHY data partition
[10:55:37.001] E (684) phy
[10:55:37.006] _init: failed to obtain PHY init data
[10:55:37.006] 
[10:55:37.049] abort() was called at PC 0x4208f347 on core 0
[10:55:37.049] 
[10:55:37.049] 
[10:55:37.049] Backtrace: 0
[10:55:37.054] x40375c96:0x3fca5110 0x4037ce0d:0x3fca5130 0x40384f02:0x3fca5150
[10:55:37.060]  0x4208f347:0x3fca51c0 0x4208f430:0x3fca51f0 0x4206ee02:0x3fca52
[10:55:37.066] 10 0x4206f5a5:0x3fca5230 0x4206dcd2:0x3fca5250 0x4038530d:0x3fca
[10:55:37.071] 5270 0x40380eb1:0x3fca52a0
[10:55:37.071] 
[10:55:37.071] 
[10:55:37.071] 
[10:55:37.071] 
[10:55:37.071] ELF file SHA256: 8d3588edb18
[10:55:37.076] ffe85
[10:55:37.076] 
[10:55:37.076] I (748) esp_core_dump_uart: Press Enter to print
[10:55:37.081]  core dump to UART...
[10:55:37.081] I (755) esp_core_dump_uart: Pr
[10:55:37.088] int core dump to uart...
[10:55:37.088] ================= CORE DUMP START 
[10:55:37.093] =================
[10:55:37.093] RFoAAAABCQAAAAAAAAAAAAAAAAA=
[10:55:37.093] f0VMRgEBAQAAAAA
[10:55:37.099] AAAAAAAQAXgABAAAAAAAAADQAAAAAAAAAAAAAADQAIAAcACgA
[10:55:37.099] AAAAAA==
[10:55:37.099] BAA
[10:55:37.104] AALQDAAAAAAAAAAAAAOAeAADgHgAABgAAAAAAAAA=
[10:55:37.104] AQAAAJQiAADgfM8/4HzPP
[10:55:37.110] 2QBAABkAQAABgAAAAAAAAA=
[10:55:37.110] AQAAAPgjAABQUMo/UFDKP7ADAACwAwAABgAAAAA
[10:55:37.116] AAAA=
[10:55:37.116] AQAAAKgnAABoPc8/aD3PP2QBAABkAQAABgAAAAAAAAA=
[10:55:37.116] AQAAAAwpAAA
[10:55:37.121] QOc8/EDnPP1AEAABQBAAABgAA

More Information.

其他开发人员也出现了这个问题

@chen-pine chen-pine added the Type: Bug bugs in IDF label Dec 10, 2024
@github-actions github-actions bot changed the title 进行CE认证时,使用ESP32S3_wifi_Adaptivity&Blocking_20230328.bin固件烧到到ESP32-S3-WROOM-2模组时报错 进行CE认证时,使用ESP32S3_wifi_Adaptivity&Blocking_20230328.bin固件烧到到ESP32-S3-WROOM-2模组时报错 (IDFGH-14210) Dec 10, 2024
@espressif-bot espressif-bot added the Status: Opened Issue is new label Dec 10, 2024
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
Status: Opened Issue is new Type: Bug bugs in IDF
Projects
None yet
Development

No branches or pull requests

3 participants