diff --git a/.doctrees/chameo.doctree b/.doctrees/chameo.doctree index 1ff13b7..bb78df3 100644 Binary files a/.doctrees/chameo.doctree and b/.doctrees/chameo.doctree differ diff --git a/.doctrees/environment.pickle b/.doctrees/environment.pickle index d4e3aa2..1a7ba39 100644 Binary files a/.doctrees/environment.pickle and b/.doctrees/environment.pickle differ diff --git a/_sources/chameo.rst.txt b/_sources/chameo.rst.txt index a036669..fcea140 100644 --- a/_sources/chameo.rst.txt +++ b/_sources/chameo.rst.txt @@ -34,37 +34,37 @@ ACVoltammetry Annotations - Comment - The resulting alternating current is plotted versus imposed DC potential. The obtained AC voltammogram is peak-shaped. + Preflabel + ACVoltammetry - Comment + Altlabel + ACV + + + Elucidation voltammetry in which a sinusoidal alternating potential of small amplitude (10 to 50 mV) of constant frequency (10 Hz to 100 kHz) is superimposed on a slowly and linearly varying potential ramp Comment - + The resulting alternating current is plotted versus imposed DC potential. The obtained AC voltammogram is peak-shaped. - Preflabel - ACVoltammetry + Comment + voltammetry in which a sinusoidal alternating potential of small amplitude (10 to 50 mV) of constant frequency (10 Hz to 100 kHz) is superimposed on a slowly and linearly varying potential ramp - Elucidation - voltammetry in which a sinusoidal alternating potential of small amplitude (10 to 50 mV) of constant frequency (10 Hz to 100 kHz) is superimposed on a slowly and linearly varying potential ramp + Comment + - Altlabel - ACV + Wikidatareference + https://www.wikidata.org/wiki/Q120895154 Iupacreference https://doi.org/10.1515/pac-2018-0109 - - Wikidatareference - https://www.wikidata.org/wiki/Q120895154 - Label ACVoltammetry @@ -96,14 +96,6 @@ AbrasiveStrippingVoltammetry Annotations - - Comment - electrochemical method where traces of solid particles are abrasively transferred onto the surface of an electrode, followed by an electrochemical dissolution (anodic or cathodic dissolution) that is recorded as a current–voltage curve - - - Comment - - Preflabel AbrasiveStrippingVoltammetry @@ -112,6 +104,14 @@ AbrasiveStrippingVoltammetry Elucidation electrochemical method where traces of solid particles are abrasively transferred onto the surface of an electrode, followed by an electrochemical dissolution (anodic or cathodic dissolution) that is recorded as a current–voltage curve + + Comment + electrochemical method where traces of solid particles are abrasively transferred onto the surface of an electrode, followed by an electrochemical dissolution (anodic or cathodic dissolution) that is recorded as a current–voltage curve + + + Comment + + Label AbrasiveStrippingVoltammetry @@ -143,10 +143,6 @@ AccessConditions Annotations - - Comment - Describes what is needed to repeat the experiment - Preflabel AccessConditions @@ -155,6 +151,10 @@ AccessConditions Elucidation Describes what is needed to repeat the experiment + + Comment + Describes what is needed to repeat the experiment + Example In case of national or international facilities such as synchrotrons describe the programme that enabled you to access these. Was the access to your characterisation tool an inhouse routine or required a 3rd party service? Was the access to your sample preparation an inhouse routine or required a 3rd party service? @@ -190,25 +190,25 @@ AdsorptiveStrippingVoltammetry Annotations - - Comment - A peak-shaped adsorptive stripping voltammogram is obtained. Peak current depends on time of accumulation, mass transport of analyte (stirring), scan rate and mode (linear or pulse), and analyte concentration in solution. AdSV is usually employed for analysis of organic compounds or metal complexes with organic ligands. Stripping is done by means of an anodic or a cathodic voltammetric scan (linear or pulse), during which the adsorbed compound is oxidized or reduced. - - - Comment - Stripping voltammetry involving pre-concentration by adsorption of the analyte (in contrast to electro-chemical accumulation). - Preflabel AdsorptiveStrippingVoltammetry + + Altlabel + AdSV + Elucidation Stripping voltammetry involving pre-concentration by adsorption of the analyte (in contrast to electro-chemical accumulation). - Altlabel - AdSV + Comment + A peak-shaped adsorptive stripping voltammogram is obtained. Peak current depends on time of accumulation, mass transport of analyte (stirring), scan rate and mode (linear or pulse), and analyte concentration in solution. AdSV is usually employed for analysis of organic compounds or metal complexes with organic ligands. Stripping is done by means of an anodic or a cathodic voltammetric scan (linear or pulse), during which the adsorbed compound is oxidized or reduced. + + + Comment + Stripping voltammetry involving pre-concentration by adsorption of the analyte (in contrast to electro-chemical accumulation). Iupacreference @@ -245,10 +245,6 @@ AlphaSpectrometry Annotations - - Comment - Alpha spectrometry (also known as alpha(-particle) spectroscopy) is the quantitative study of the energy of alpha particles emitted by a radioactive nuclide that is an alpha emitter. As emitted alpha particles are mono-energetic (i.e. not emitted with a spectrum of energies, such as beta decay) with energies often distinct to the decay they can be used to identify which radionuclide they originated from. - Preflabel AlphaSpectrometry @@ -257,6 +253,10 @@ AlphaSpectrometry Elucidation Alpha spectrometry (also known as alpha(-particle) spectroscopy) is the quantitative study of the energy of alpha particles emitted by a radioactive nuclide that is an alpha emitter. As emitted alpha particles are mono-energetic (i.e. not emitted with a spectrum of energies, such as beta decay) with energies often distinct to the decay they can be used to identify which radionuclide they originated from. + + Comment + Alpha spectrometry (also known as alpha(-particle) spectroscopy) is the quantitative study of the energy of alpha particles emitted by a radioactive nuclide that is an alpha emitter. As emitted alpha particles are mono-energetic (i.e. not emitted with a spectrum of energies, such as beta decay) with energies often distinct to the decay they can be used to identify which radionuclide they originated from. + Label AlphaSpectrometry @@ -289,35 +289,19 @@ Amperometry Annotations - Comment - Amperometry can be distinguished from voltammetry by the parameter being controlled (electrode potential E) and the parameter being measured (electrode current I which is usually a function of time – see chronoamperometry). - - - Comment - In a non-stirred solution, a diffusion-limited current is usually measured, which is propor-tional to the concentration of an electroactive analyte. + Preflabel + Amperometry - Comment + Elucidation The amperometric method provides the ability to distinguish selectively between a number of electroactive species in solution by judicious selection of the applied potential and/or choice of electrode material. Comment - The current is usually faradaic and the applied potential is usually constant. + Amperometry can be distinguished from voltammetry by the parameter being controlled (electrode potential E) and the parameter being measured (electrode current I which is usually a function of time – see chronoamperometry). In a non-stirred solution, a diffusion-limited current is usually measured, which is propor-tional to the concentration of an electroactive analyte. The current is usually faradaic and the applied potential is usually constant. The integral of current with time is the electric charge, which may be related to the amount of substance reacted by Faraday’s laws of electrolysis. Comment - The integral of current with time is the electric charge, which may be related to the amount of substance reacted by Faraday’s laws of electrolysis. - - - Comment - - - - Preflabel - Amperometry - - - Elucidation The amperometric method provides the ability to distinguish selectively between a number of electroactive species in solution by judicious selection of the applied potential and/or choice of electrode material. @@ -355,14 +339,6 @@ AnalyticalElectronMicroscopy Annotations - - Comment - Analytical electron microscopy (AEM) refers to the collection of spectroscopic data in TEM or STEM, enabling qualitative or quantitative compositional analysis. - - - Comment - - Preflabel AnalyticalElectronMicroscopy @@ -371,6 +347,10 @@ AnalyticalElectronMicroscopy Elucidation Analytical electron microscopy (AEM) refers to the collection of spectroscopic data in TEM or STEM, enabling qualitative or quantitative compositional analysis. + + Comment + Analytical electron microscopy (AEM) refers to the collection of spectroscopic data in TEM or STEM, enabling qualitative or quantitative compositional analysis. + Label AnalyticalElectronMicroscopy @@ -402,38 +382,26 @@ AnodicStrippingVoltammetry Annotations - - Comment - A peak-shaped anodic stripping voltammogram is obtained. Peak current depends on time of accumulation, mass transport of analyte (stirring), scan rate and mode (linear or pulse), and analyte concentration in solution. - - - Comment - A solid electrode, carbon paste or composite electrode, bismuth film electrode, mercury film electrode, or static mercury drop electrode may be used. - - - Comment - Stripping voltammetry in which material accumulated at the working electrode is electrochemically oxi- dized in the stripping step. - - - Comment - - Preflabel AnodicStrippingVoltammetry Elucidation - Stripping voltammetry in which material accumulated at the working electrode is electrochemically oxi- dized in the stripping step. + Stripping voltammetry in which material accumulated at the working electrode is electrochemically oxi- dized in the stripping step. A peak-shaped anodic stripping voltammogram is obtained. Peak current depends on time of accumulation, mass transport of analyte (stirring), scan rate and mode (linear or pulse), and analyte concentration in solution. A solid electrode, carbon paste or composite electrode, bismuth film electrode, mercury film electrode, or static mercury drop electrode may be used. - Iupacreference - https://doi.org/10.1515/pac-2018-0109 + Comment + Stripping voltammetry in which material accumulated at the working electrode is electrochemically oxi- dized in the stripping step. A peak-shaped anodic stripping voltammogram is obtained. Peak current depends on time of accumulation, mass transport of analyte (stirring), scan rate and mode (linear or pulse), and analyte concentration in solution. A solid electrode, carbon paste or composite electrode, bismuth film electrode, mercury film electrode, or static mercury drop electrode may be used. Wikidatareference https://www.wikidata.org/wiki/Q939328 + + Iupacreference + https://doi.org/10.1515/pac-2018-0109 + Label AnodicStrippingVoltammetry @@ -465,18 +433,10 @@ AtomProbeTomography Annotations - - Comment - Atom Probe Tomography (APT or 3D Atom Probe) is the only material analysis technique offering extensive capabilities for both 3D imaging and chemical composition measurements at the atomic scale (around 0.1-0.3nm resolution in depth and 0.3-0.5nm laterally). Since its early developments, Atom Probe Tomography has contributed to major advances in materials science. The sample is prepared in the form of a very sharp tip. The cooled tip is biased at high DC voltage (3-15 kV). The very small radius of the tip and the High Voltage induce a very high electrostatic field (tens V/nm) at the tip surface, just below the point of atom evaporation. Under laser or HV pulsing, one or more atoms are evaporated from the surface, by field effect (near 100% ionization), and projected onto a Position Sensitive Detector (PSD) with a very high detection efficiency. Ion efficiencies are as high as 80%, the highest analytical efficiency of any 3D microscopy. - Preflabel AtomProbeTomography - - Elucidation - Atom Probe Tomography (APT or 3D Atom Probe) is the only material analysis technique offering extensive capabilities for both 3D imaging and chemical composition measurements at the atomic scale (around 0.1-0.3nm resolution in depth and 0.3-0.5nm laterally). Since its early developments, Atom Probe Tomography has contributed to major advances in materials science. The sample is prepared in the form of a very sharp tip. The cooled tip is biased at high DC voltage (3-15 kV). The very small radius of the tip and the High Voltage induce a very high electrostatic field (tens V/nm) at the tip surface, just below the point of atom evaporation. Under laser or HV pulsing, one or more atoms are evaporated from the surface, by field effect (near 100% ionization), and projected onto a Position Sensitive Detector (PSD) with a very high detection efficiency. Ion efficiencies are as high as 80%, the highest analytical efficiency of any 3D microscopy. - Altlabel 3D Atom Probe @@ -485,6 +445,14 @@ AtomProbeTomography Altlabel APT + + Elucidation + Atom Probe Tomography (APT or 3D Atom Probe) is the only material analysis technique offering extensive capabilities for both 3D imaging and chemical composition measurements at the atomic scale (around 0.1-0.3nm resolution in depth and 0.3-0.5nm laterally). Since its early developments, Atom Probe Tomography has contributed to major advances in materials science. The sample is prepared in the form of a very sharp tip. The cooled tip is biased at high DC voltage (3-15 kV). The very small radius of the tip and the High Voltage induce a very high electrostatic field (tens V/nm) at the tip surface, just below the point of atom evaporation. Under laser or HV pulsing, one or more atoms are evaporated from the surface, by field effect (near 100% ionization), and projected onto a Position Sensitive Detector (PSD) with a very high detection efficiency. Ion efficiencies are as high as 80%, the highest analytical efficiency of any 3D microscopy. + + + Comment + Atom Probe Tomography (APT or 3D Atom Probe) is the only material analysis technique offering extensive capabilities for both 3D imaging and chemical composition measurements at the atomic scale (around 0.1-0.3nm resolution in depth and 0.3-0.5nm laterally). Since its early developments, Atom Probe Tomography has contributed to major advances in materials science. The sample is prepared in the form of a very sharp tip. The cooled tip is biased at high DC voltage (3-15 kV). The very small radius of the tip and the High Voltage induce a very high electrostatic field (tens V/nm) at the tip surface, just below the point of atom evaporation. Under laser or HV pulsing, one or more atoms are evaporated from the surface, by field effect (near 100% ionization), and projected onto a Position Sensitive Detector (PSD) with a very high detection efficiency. Ion efficiencies are as high as 80%, the highest analytical efficiency of any 3D microscopy. + Label AtomProbeTomography @@ -516,10 +484,6 @@ AtomicForceMicroscopy Annotations - - Comment - Atomic force microscopy (AFM) is an influential surface analysis technique used for micro/nanostructured coatings. This flexible technique can be used to obtain high-resolution nanoscale images and study local sites in air (conventional AFM) or liquid (electrochemical AFM) surroundings. - Preflabel AtomicForceMicroscopy @@ -528,6 +492,10 @@ AtomicForceMicroscopy Elucidation Atomic force microscopy (AFM) is an influential surface analysis technique used for micro/nanostructured coatings. This flexible technique can be used to obtain high-resolution nanoscale images and study local sites in air (conventional AFM) or liquid (electrochemical AFM) surroundings. + + Comment + Atomic force microscopy (AFM) is an influential surface analysis technique used for micro/nanostructured coatings. This flexible technique can be used to obtain high-resolution nanoscale images and study local sites in air (conventional AFM) or liquid (electrochemical AFM) surroundings. + Label AtomicForceMicroscopy @@ -559,30 +527,30 @@ BrunauerEmmettTellerMethod Annotations - - Comment - A technique used to measure the specific surface area of porous materials by analyzing the adsorption of gas molecules onto the material's surface - Preflabel BrunauerEmmettTellerMethod - - Elucidation - A technique used to measure the specific surface area of porous materials by analyzing the adsorption of gas molecules onto the material's surface - Altlabel BET - Wikidatareference - https://www.wikidata.org/wiki/Q795838 + Elucidation + A technique used to measure the specific surface area of porous materials by analyzing the adsorption of gas molecules onto the material's surface + + + Comment + A technique used to measure the specific surface area of porous materials by analyzing the adsorption of gas molecules onto the material's surface Wikipediareference https://en.wikipedia.org/wiki/BET_theory + + Wikidatareference + https://www.wikidata.org/wiki/Q795838 + Label BrunauerEmmettTellerMethod @@ -614,10 +582,6 @@ CalibrationData Annotations - - Comment - Calibration data are used to provide correction of measured data or perform uncertainty calculations. They are generally the result of a measuerement on a reference specimen. - Preflabel CalibrationData @@ -626,6 +590,10 @@ CalibrationData Elucidation Calibration data are used to provide correction of measured data or perform uncertainty calculations. They are generally the result of a measuerement on a reference specimen. + + Comment + Calibration data are used to provide correction of measured data or perform uncertainty calculations. They are generally the result of a measuerement on a reference specimen. + Label CalibrationData @@ -657,10 +625,6 @@ CalibrationDataPostProcessing Annotations - - Comment - Post-processing of the output of the calibration in order to get the actual calibration data to be used as input for the measurement. - Preflabel CalibrationDataPostProcessing @@ -669,6 +633,10 @@ CalibrationDataPostProcessing Elucidation Post-processing of the output of the calibration in order to get the actual calibration data to be used as input for the measurement. + + Comment + Post-processing of the output of the calibration in order to get the actual calibration data to be used as input for the measurement. + Label CalibrationDataPostProcessing @@ -700,6 +668,14 @@ CalibrationProcess Annotations + + Preflabel + CalibrationProcess + + + Elucidation + Sequence of operations/actions that are needed to convert the initial signal (as produced by the detector) into a meaningful and useable raw data. + Comment Usually the calibration process involve a reference sample (with pre-defined, specific, and stable physical characteristics and known properties), in order to extract calibration data. In this way, the accuracy of the measurement tool and its components (for example the probe) will be evaluated and confirmed. @@ -717,21 +693,13 @@ CalibrationProcess Usually the calibration process involve a reference sample (with pre-defined, specific, and stable physical characteristics and known properties), in order to extract calibration data. In this way, the accuracy of the measurement tool and its components (for example the probe) will be evaluated and confirmed. - Preflabel - CalibrationProcess - - - Elucidation - Sequence of operations/actions that are needed to convert the initial signal (as produced by the detector) into a meaningful and useable raw data. + Definition + Operation performed on a measuring instrument or a measuring system that, under specified conditions
1. establishes a relation between the values with measurement uncertainties provided by measurement standards and corresponding indications with associated measurement uncertainties and
2. uses this information to establish a relation for obtaining a measurement result from an indication
NOTE 1 The objective of calibration is to provide traceability of measurement results obtained when using a calibrated measuring instrument or measuring system.
NOTE 2 The outcome of a calibration may be expressed by a statement, calibration function, calibration diagram, calibration curve, or calibration table. In some cases, it may consist of an additive or multiplicative correction of the indication with associated measurement uncertainty.
NOTE 3 Calibration should not be confused with adjustment of a measuring system, often mistakenly called “selfcalibration”, nor with verification of calibration. Calibration is sometimes a prerequisite for verification, which provides confirmation that specified requirements (often maximum permissible errors) are met. Calibration is sometimes also a prerequisite for adjustment, which is the set of operations carried out on a measuring system such that the system provides prescribed indications corresponding to given values of quantities being measured, typically obtained from
measurement standards.
NOTE 4 Sometimes the first step alone of the operation mentioned in the definition is intended as being calibration, as it was in previous editions of this Vocabulary. The second step is in fact required to establish instrumental uncertainty
for the measurement results obtained when using the calibrated measuring system. The two steps together aim to demonstrate the metrological traceability of measurement results obtained by a calibrated measuring system. In the
past the second step was usually considered to occur after the calibration.
NOTE 5 A comparison between two measurement standards may be viewed as a calibration if the comparison is used to check and, if necessary, correct the value and measurement uncertainty attributed to one of the measurement
standards.

-- International Vocabulary of Metrology(VIM) Example In nanoindentation, the electrical signal coming from capacitive displacement gauge is converted into a real raw-displacement signal after using a proper calibration function (as obtained by the equipment manufacturer). Then, additional calibration procedures are applied to define the point of initial contact and to correct for instrument compliance, thermal drift, and indenter area function to obtain the real useable displacement data. - - Definition - Operation performed on a measuring instrument or a measuring system that, under specified conditions
1. establishes a relation between the values with measurement uncertainties provided by measurement standards and corresponding indications with associated measurement uncertainties and
2. uses this information to establish a relation for obtaining a measurement result from an indication
NOTE 1 The objective of calibration is to provide traceability of measurement results obtained when using a calibrated measuring instrument or measuring system.
NOTE 2 The outcome of a calibration may be expressed by a statement, calibration function, calibration diagram, calibration curve, or calibration table. In some cases, it may consist of an additive or multiplicative correction of the indication with associated measurement uncertainty.
NOTE 3 Calibration should not be confused with adjustment of a measuring system, often mistakenly called “selfcalibration”, nor with verification of calibration. Calibration is sometimes a prerequisite for verification, which provides confirmation that specified requirements (often maximum permissible errors) are met. Calibration is sometimes also a prerequisite for adjustment, which is the set of operations carried out on a measuring system such that the system provides prescribed indications corresponding to given values of quantities being measured, typically obtained from
measurement standards.
NOTE 4 Sometimes the first step alone of the operation mentioned in the definition is intended as being calibration, as it was in previous editions of this Vocabulary. The second step is in fact required to establish instrumental uncertainty
for the measurement results obtained when using the calibrated measuring system. The two steps together aim to demonstrate the metrological traceability of measurement results obtained by a calibrated measuring system. In the
past the second step was usually considered to occur after the calibration.
NOTE 5 A comparison between two measurement standards may be viewed as a calibration if the comparison is used to check and, if necessary, correct the value and measurement uncertainty attributed to one of the measurement
standards.

-- International Vocabulary of Metrology(VIM) - Label CalibrationProcess @@ -771,10 +739,6 @@ CalibrationTask Annotations - - Comment - Used to break-down a CalibrationProcess into his specific tasks. - Preflabel CalibrationTask @@ -783,6 +747,10 @@ CalibrationTask Elucidation Used to break-down a CalibrationProcess into his specific tasks. + + Comment + Used to break-down a CalibrationProcess into his specific tasks. + Label CalibrationTask @@ -818,10 +786,6 @@ Calorimetry Annotations - - Comment - In chemistry and thermodynamics, calorimetry (from Latin calor 'heat', and Greek μέτρον (metron) 'measure') is the science or act of measuring changes in state variables of a body for the purpose of deriving the heat transfer associated with changes of its state due, for example, to chemical reactions, physical changes, or phase transitions under specified constraints. Calorimetry is performed with a calorimeter. - Preflabel Calorimetry @@ -830,6 +794,10 @@ Calorimetry Elucidation In chemistry and thermodynamics, calorimetry (from Latin calor 'heat', and Greek μέτρον (metron) 'measure') is the science or act of measuring changes in state variables of a body for the purpose of deriving the heat transfer associated with changes of its state due, for example, to chemical reactions, physical changes, or phase transitions under specified constraints. Calorimetry is performed with a calorimeter. + + Comment + In chemistry and thermodynamics, calorimetry (from Latin calor 'heat', and Greek μέτρον (metron) 'measure') is the science or act of measuring changes in state variables of a body for the purpose of deriving the heat transfer associated with changes of its state due, for example, to chemical reactions, physical changes, or phase transitions under specified constraints. Calorimetry is performed with a calorimeter. + Label Calorimetry @@ -861,30 +829,30 @@ CathodicStrippingVoltammetry Annotations - - Comment - Stripping voltammetry in which material accumulated at the working electrode is electrochemically reduced in the stripping step. A peak-shaped cathodic stripping voltammogram is obtained. Peak current depends on time of accumulation, mass transport of analyte (stirring), scan rate and mode (linear or pulse), and analyte concentration in solution. - Preflabel CathodicStrippingVoltammetry - - Elucidation - Stripping voltammetry in which material accumulated at the working electrode is electrochemically reduced in the stripping step. A peak-shaped cathodic stripping voltammogram is obtained. Peak current depends on time of accumulation, mass transport of analyte (stirring), scan rate and mode (linear or pulse), and analyte concentration in solution. - Altlabel CSV - Iupacreference - https://doi.org/10.1515/pac-2018-0109 + Elucidation + Stripping voltammetry in which material accumulated at the working electrode is electrochemically reduced in the stripping step. A peak-shaped cathodic stripping voltammogram is obtained. Peak current depends on time of accumulation, mass transport of analyte (stirring), scan rate and mode (linear or pulse), and analyte concentration in solution. + + + Comment + Stripping voltammetry in which material accumulated at the working electrode is electrochemically reduced in the stripping step. A peak-shaped cathodic stripping voltammogram is obtained. Peak current depends on time of accumulation, mass transport of analyte (stirring), scan rate and mode (linear or pulse), and analyte concentration in solution. Wikidatareference https://www.wikidata.org/wiki/Q4016325 + + Iupacreference + https://doi.org/10.1515/pac-2018-0109 + Label CathodicStrippingVoltammetry @@ -916,14 +884,14 @@ CharacterisationComponent Annotations - - Comment - - Preflabel CharacterisationComponent + + Comment + + Label CharacterisationComponent @@ -955,10 +923,6 @@ CharacterisationData Annotations - - Comment - Represents every type of data that is produced during a characterisation process - Preflabel CharacterisationData @@ -967,6 +931,10 @@ CharacterisationData Elucidation Represents every type of data that is produced during a characterisation process + + Comment + Represents every type of data that is produced during a characterisation process + Label CharacterisationData @@ -998,10 +966,6 @@ CharacterisationDataValidation Annotations - - Comment - Procedure to validate the characterisation data. - Preflabel CharacterisationDataValidation @@ -1010,6 +974,10 @@ CharacterisationDataValidation Elucidation Procedure to validate the characterisation data. + + Comment + Procedure to validate the characterisation data. + Label CharacterisationDataValidation @@ -1042,23 +1010,23 @@ CharacterisationEnvironment Annotations - Comment - Characterisation can either be made in air (ambient conditions, without specific controls on environmental parameters), or at different temperatures, different pressures (or in vacuum), or using different types of working gases (inert or reactive with respect to sample), different levels of humidity, etc. + Preflabel + CharacterisationEnvironment - Comment - Characterisation can either be made in air (ambient conditions, without specific controls on environmental parameters), or at different temperatures, different pressures (or in vacuum), or using different types of working gases (inert or reactive with respect to sample), different levels of humidity, etc. + Elucidation + Medium of the characterisation experiment defined by the set of environmental conditions that are controlled and measured over time during the experiment. Comment - Medium of the characterisation experiment defined by the set of environmental conditions that are controlled and measured over time during the experiment. + Characterisation can either be made in air (ambient conditions, without specific controls on environmental parameters), or at different temperatures, different pressures (or in vacuum), or using different types of working gases (inert or reactive with respect to sample), different levels of humidity, etc. - Preflabel - CharacterisationEnvironment + Comment + Characterisation can either be made in air (ambient conditions, without specific controls on environmental parameters), or at different temperatures, different pressures (or in vacuum), or using different types of working gases (inert or reactive with respect to sample), different levels of humidity, etc. - Elucidation + Comment Medium of the characterisation experiment defined by the set of environmental conditions that are controlled and measured over time during the experiment. @@ -1100,14 +1068,14 @@ CharacterisationEnvironmentProperty Annotations - - Comment - - Preflabel CharacterisationEnvironmentProperty + + Comment + + Label CharacterisationEnvironmentProperty @@ -1140,19 +1108,19 @@ CharacterisationExperiment Annotations - Comment - A characterisation experiment is the process by which a material's structure and properties are probed and measured. It is a fundamental process in the field of materials science, without which no scientific understanding of engineering materials could be ascertained. + Preflabel + CharacterisationExperiment - Comment + Elucidation A characterisation experiment is the process by which a material's structure and properties are probed and measured. It is a fundamental process in the field of materials science, without which no scientific understanding of engineering materials could be ascertained. - Preflabel - CharacterisationExperiment + Comment + A characterisation experiment is the process by which a material's structure and properties are probed and measured. It is a fundamental process in the field of materials science, without which no scientific understanding of engineering materials could be ascertained. - Elucidation + Comment A characterisation experiment is the process by which a material's structure and properties are probed and measured. It is a fundamental process in the field of materials science, without which no scientific understanding of engineering materials could be ascertained. @@ -1186,10 +1154,6 @@ CharacterisationHardware Annotations - - Comment - Whatever hardware is used during the characterisation process. - Preflabel CharacterisationHardware @@ -1198,6 +1162,10 @@ CharacterisationHardware Elucidation Whatever hardware is used during the characterisation process. + + Comment + Whatever hardware is used during the characterisation process. + Label CharacterisationHardware @@ -1229,14 +1197,14 @@ CharacterisationHardwareSpecification Annotations - - Comment - - Preflabel CharacterisationHardwareSpecification + + Comment + + Label CharacterisationHardwareSpecification @@ -1269,24 +1237,24 @@ CharacterisationMeasurementInstrument Annotations - Comment - Device used for making measurements, alone or in conjunction with one or more supplementary
devices
NOTE 1 A measuring instrument that can be used alone for making measurements is a measuring system.
NOTE 2 A measuring instrument is either an indicating measuring instrument or a material measure. + Preflabel + CharacterisationMeasurementInstrument - Comment + Elucidation The instrument used for characterising a material, which usually has a probe and a detector as parts. Comment - + Device used for making measurements, alone or in conjunction with one or more supplementary
devices
NOTE 1 A measuring instrument that can be used alone for making measurements is a measuring system.
NOTE 2 A measuring instrument is either an indicating measuring instrument or a material measure. - Preflabel - CharacterisationMeasurementInstrument + Comment + The instrument used for characterising a material, which usually has a probe and a detector as parts. - Elucidation - The instrument used for characterising a material, which usually has a probe and a detector as parts. + Definition + Device used for making measurements, alone or in conjunction with one or more supplementary
devices
NOTE 1 A measuring instrument that can be used alone for making measurements is a measuring system.
NOTE 2 A measuring instrument is either an indicating measuring instrument or a material measure. Vimterm @@ -1296,10 +1264,6 @@ CharacterisationMeasurementInstrument Example In nanoindentation is the nanoindenter - - Definition - Device used for making measurements, alone or in conjunction with one or more supplementary
devices
NOTE 1 A measuring instrument that can be used alone for making measurements is a measuring system.
NOTE 2 A measuring instrument is either an indicating measuring instrument or a material measure. - Label CharacterisationMeasurementInstrument @@ -1348,33 +1312,29 @@ CharacterisationMeasurementProcess Annotations - Comment - Process of experimentally obtaining one or more values that can reasonably be attributed to a quantity together with any other available relevant information
NOTE 1 The quantity mentioned in the definition is an individual quantity.
NOTE 2 The relevant information mentioned in the definition may be about the values obtained by the measurement,
such that some may be more representative of the measurand than others.
NOTE 3 Measurement is sometimes considered to apply to nominal properties, but not in this Vocabulary, where the
process of obtaining values of nominal properties is called “examination”.
NOTE 4 Measurement requires both experimental comparison of quantities or experimental counting of entities at
some step of the process and the use of models and calculations that are based on conceptual considerations.
NOTE 5 The conditions of reasonable attribution mentioned in the definition take into account a description of the
quantity commensurate with the intended use of a measurement result, a measurement procedure, and a calibrated
measuring system operating according to the specified measurement procedure, including the measurement
conditions. Moreover, a maximum permissible error and/or a target uncertainty may be specified, and the
measurement procedure and the measuring system should then be chosen in order not to exceed these measuring
system specifications.

-- International Vocabulary of Metrology(VIM) + Preflabel + CharacterisationMeasurementProcess - Comment + Elucidation The measurement process associates raw data to the sample through a probe and a detector. Comment - + Process of experimentally obtaining one or more values that can reasonably be attributed to a quantity together with any other available relevant information
NOTE 1 The quantity mentioned in the definition is an individual quantity.
NOTE 2 The relevant information mentioned in the definition may be about the values obtained by the measurement,
such that some may be more representative of the measurand than others.
NOTE 3 Measurement is sometimes considered to apply to nominal properties, but not in this Vocabulary, where the
process of obtaining values of nominal properties is called “examination”.
NOTE 4 Measurement requires both experimental comparison of quantities or experimental counting of entities at
some step of the process and the use of models and calculations that are based on conceptual considerations.
NOTE 5 The conditions of reasonable attribution mentioned in the definition take into account a description of the
quantity commensurate with the intended use of a measurement result, a measurement procedure, and a calibrated
measuring system operating according to the specified measurement procedure, including the measurement
conditions. Moreover, a maximum permissible error and/or a target uncertainty may be specified, and the
measurement procedure and the measuring system should then be chosen in order not to exceed these measuring
system specifications.

-- International Vocabulary of Metrology(VIM) - Preflabel - CharacterisationMeasurementProcess + Comment + The measurement process associates raw data to the sample through a probe and a detector. - Elucidation - The measurement process associates raw data to the sample through a probe and a detector. + Definition + Process of experimentally obtaining one or more values that can reasonably be attributed to a quantity together with any other available relevant information
NOTE 1 The quantity mentioned in the definition is an individual quantity.
NOTE 2 The relevant information mentioned in the definition may be about the values obtained by the measurement,
such that some may be more representative of the measurand than others.
NOTE 3 Measurement is sometimes considered to apply to nominal properties, but not in this Vocabulary, where the
process of obtaining values of nominal properties is called “examination”.
NOTE 4 Measurement requires both experimental comparison of quantities or experimental counting of entities at
some step of the process and the use of models and calculations that are based on conceptual considerations.
NOTE 5 The conditions of reasonable attribution mentioned in the definition take into account a description of the
quantity commensurate with the intended use of a measurement result, a measurement procedure, and a calibrated
measuring system operating according to the specified measurement procedure, including the measurement
conditions. Moreover, a maximum permissible error and/or a target uncertainty may be specified, and the
measurement procedure and the measuring system should then be chosen in order not to exceed these measuring
system specifications.

-- International Vocabulary of Metrology(VIM) Vimterm Measurement - - Definition - Process of experimentally obtaining one or more values that can reasonably be attributed to a quantity together with any other available relevant information
NOTE 1 The quantity mentioned in the definition is an individual quantity.
NOTE 2 The relevant information mentioned in the definition may be about the values obtained by the measurement,
such that some may be more representative of the measurand than others.
NOTE 3 Measurement is sometimes considered to apply to nominal properties, but not in this Vocabulary, where the
process of obtaining values of nominal properties is called “examination”.
NOTE 4 Measurement requires both experimental comparison of quantities or experimental counting of entities at
some step of the process and the use of models and calculations that are based on conceptual considerations.
NOTE 5 The conditions of reasonable attribution mentioned in the definition take into account a description of the
quantity commensurate with the intended use of a measurement result, a measurement procedure, and a calibrated
measuring system operating according to the specified measurement procedure, including the measurement
conditions. Moreover, a maximum permissible error and/or a target uncertainty may be specified, and the
measurement procedure and the measuring system should then be chosen in order not to exceed these measuring
system specifications.

-- International Vocabulary of Metrology(VIM) - Label CharacterisationMeasurementProcess @@ -1430,14 +1390,6 @@ CharacterisationMeasurementTask Annotations - - Comment - Used to break-down a CharacterisationMeasurementProcess into his specific tasks. - - - Comment - - Preflabel CharacterisationMeasurementTask @@ -1446,6 +1398,10 @@ CharacterisationMeasurementTask Elucidation Used to break-down a CharacterisationMeasurementProcess into his specific tasks. + + Comment + Used to break-down a CharacterisationMeasurementProcess into his specific tasks. + Label CharacterisationMeasurementTask @@ -1482,27 +1438,23 @@ CharacterisationProcedure Annotations - Comment - Characterisation procedure may refer to the full characterisation process or just a part of the full process. - - - Comment - Characterisation procedure may refer to the full characterisation process or just a part of the full process. + Preflabel + CharacterisationProcedure - Comment + Elucidation The process of performing characterisation by following some existing formalised operative rules. Comment - + Characterisation procedure may refer to the full characterisation process or just a part of the full process. - Preflabel - CharacterisationProcedure + Comment + Characterisation procedure may refer to the full characterisation process or just a part of the full process. - Elucidation + Comment The process of performing characterisation by following some existing formalised operative rules. @@ -1540,14 +1492,6 @@ CharacterisationProcedureValidation Annotations - - Comment - Describes why the characterization procedure was chosen and deemed to be the most useful for the sample. - - - Comment - - Preflabel CharacterisationProcedureValidation @@ -1556,6 +1500,10 @@ CharacterisationProcedureValidation Elucidation Describes why the characterization procedure was chosen and deemed to be the most useful for the sample. + + Comment + Describes why the characterization procedure was chosen and deemed to be the most useful for the sample. + Label CharacterisationProcedureValidation @@ -1587,14 +1535,6 @@ CharacterisationProperty Annotations - - Comment - The characterisation property is the investigate property or behaviour of a sample. It is derived from the secondary data, usually after classification or quantification (manually or by a model). - - - Comment - - Preflabel CharacterisationProperty @@ -1603,6 +1543,10 @@ CharacterisationProperty Elucidation The characterisation property is the investigate property or behaviour of a sample. It is derived from the secondary data, usually after classification or quantification (manually or by a model). + + Comment + The characterisation property is the investigate property or behaviour of a sample. It is derived from the secondary data, usually after classification or quantification (manually or by a model). + Label CharacterisationProperty @@ -1638,14 +1582,6 @@ CharacterisationProtocol Annotations - - Comment - A characterisation protocol is defined whenever it is desirable to standardize a laboratory method to ensure successful replication of results by others in the same laboratory or by other laboratories. - - - Comment - - Preflabel CharacterisationProtocol @@ -1654,6 +1590,10 @@ CharacterisationProtocol Elucidation A characterisation protocol is defined whenever it is desirable to standardize a laboratory method to ensure successful replication of results by others in the same laboratory or by other laboratories. + + Comment + A characterisation protocol is defined whenever it is desirable to standardize a laboratory method to ensure successful replication of results by others in the same laboratory or by other laboratories. + Label CharacterisationProtocol @@ -1685,14 +1625,6 @@ CharacterisationSoftware Annotations - - Comment - A software application to process characterisation data - - - Comment - - Preflabel CharacterisationSoftware @@ -1701,6 +1633,10 @@ CharacterisationSoftware Elucidation A software application to process characterisation data + + Comment + A software application to process characterisation data + Example In Nanoindentation post-processing the software used to apply the Oliver-Pharr to calculate the characterisation properties (i.e. elastic modulus, hardness) from load and depth data. @@ -1737,33 +1673,29 @@ CharacterisationSystem Annotations - Comment - A set of one or more 'CharacterisationInstruments' and often other devices, including any sample holder, reagent and supply, assembled and adapted to give information used to generate 'MeasuredQuantityProperty' within specified intervals for quantities of specified kinds. + Preflabel + CharacterisationSystem - Comment - Set of one or more measuring instruments and often other components, assembled and
adapted to give information used to generate measured values within specified intervals for
quantities of specified kinds
NOTE 1 The components mentioned in the definition may be devices, reagents, and supplies.
NOTE 2 A measuring system is sometimes referred to as “measuring equipment” or “device”, for example in ISO 10012,
Measurement management systems – Requirements for measurement processes and measuring equipment and ISO
17025, General requirements for the competence of testing and calibration laboratories.
NOTE 3 Although the terms “measuring system” and “measurement system” are frequently used synonymously, the
latter is instead sometimes used to refer to a measuring system plus all other entities involved in a measurement,
including the object under measurement and the person(s) performing the measurement.
NOTE 4 A measuring system can be used as a measurement standard. + Elucidation + A set of one or more 'CharacterisationInstruments' and often other devices, including any sample holder, reagent and supply, assembled and adapted to give information used to generate 'MeasuredQuantityProperty' within specified intervals for quantities of specified kinds. Comment - + A set of one or more 'CharacterisationInstruments' and often other devices, including any sample holder, reagent and supply, assembled and adapted to give information used to generate 'MeasuredQuantityProperty' within specified intervals for quantities of specified kinds. - Preflabel - CharacterisationSystem + Comment + Set of one or more measuring instruments and often other components, assembled and
adapted to give information used to generate measured values within specified intervals for
quantities of specified kinds
NOTE 1 The components mentioned in the definition may be devices, reagents, and supplies.
NOTE 2 A measuring system is sometimes referred to as “measuring equipment” or “device”, for example in ISO 10012,
Measurement management systems – Requirements for measurement processes and measuring equipment and ISO
17025, General requirements for the competence of testing and calibration laboratories.
NOTE 3 Although the terms “measuring system” and “measurement system” are frequently used synonymously, the
latter is instead sometimes used to refer to a measuring system plus all other entities involved in a measurement,
including the object under measurement and the person(s) performing the measurement.
NOTE 4 A measuring system can be used as a measurement standard. - Elucidation - A set of one or more 'CharacterisationInstruments' and often other devices, including any sample holder, reagent and supply, assembled and adapted to give information used to generate 'MeasuredQuantityProperty' within specified intervals for quantities of specified kinds. + Definition + Set of one or more measuring instruments and often other components, assembled and
adapted to give information used to generate measured values within specified intervals for
quantities of specified kinds
NOTE 1 The components mentioned in the definition may be devices, reagents, and supplies.
NOTE 2 A measuring system is sometimes referred to as “measuring equipment” or “device”, for example in ISO 10012,
Measurement management systems – Requirements for measurement processes and measuring equipment and ISO
17025, General requirements for the competence of testing and calibration laboratories.
NOTE 3 Although the terms “measuring system” and “measurement system” are frequently used synonymously, the
latter is instead sometimes used to refer to a measuring system plus all other entities involved in a measurement,
including the object under measurement and the person(s) performing the measurement.
NOTE 4 A measuring system can be used as a measurement standard. Vimterm Measuring system - - Definition - Set of one or more measuring instruments and often other components, assembled and
adapted to give information used to generate measured values within specified intervals for
quantities of specified kinds
NOTE 1 The components mentioned in the definition may be devices, reagents, and supplies.
NOTE 2 A measuring system is sometimes referred to as “measuring equipment” or “device”, for example in ISO 10012,
Measurement management systems – Requirements for measurement processes and measuring equipment and ISO
17025, General requirements for the competence of testing and calibration laboratories.
NOTE 3 Although the terms “measuring system” and “measurement system” are frequently used synonymously, the
latter is instead sometimes used to refer to a measuring system plus all other entities involved in a measurement,
including the object under measurement and the person(s) performing the measurement.
NOTE 4 A measuring system can be used as a measurement standard. - Label CharacterisationSystem @@ -1803,14 +1735,14 @@ CharacterisationTask Annotations - - Comment - - Preflabel CharacterisationTask + + Comment + + Label CharacterisationTask @@ -1855,36 +1787,32 @@ CharacterisationTechnique Annotations - Comment - A characterisation method is not only related to the measurement process which can be one of its steps. + Preflabel + CharacterisationTechnique - Comment - The description of the overall characterisation method. It can be composed of different steps (e.g. sample preparation, calibration, measurement, post-processing). + Altlabel + Characterisation procedure - Comment - + Altlabel + Characterisation technique - Comment - A characterisation method is not only related to the measurement process which can be one of its steps. + Elucidation + The description of the overall characterisation method. It can be composed of different steps (e.g. sample preparation, calibration, measurement, post-processing). - Preflabel - CharacterisationTechnique + Comment + A characterisation method is not only related to the measurement process which can be one of its steps. - Elucidation + Comment The description of the overall characterisation method. It can be composed of different steps (e.g. sample preparation, calibration, measurement, post-processing). - Altlabel - Characterisation procedure - - - Altlabel - Characterisation technique + Comment + A characterisation method is not only related to the measurement process which can be one of its steps. Label @@ -1918,23 +1846,19 @@ CharacterisationWorkflow Annotations - Comment + Preflabel + CharacterisationWorkflow + + + Elucidation A characterisation procedure that has at least two characterisation tasks as proper parts. Comment - + A characterisation procedure that has at least two characterisation tasks as proper parts. - Preflabel - CharacterisationWorkflow - - - Elucidation - A characterisation procedure that has at least two characterisation tasks as proper parts. - - - Label + Label CharacterisationWorkflow @@ -1976,14 +1900,6 @@ CharacterisedSample Annotations - - Comment - The sample after having been subjected to a characterization process - - - Comment - - Preflabel CharacterisedSample @@ -1992,6 +1908,10 @@ CharacterisedSample Elucidation The sample after having been subjected to a characterization process + + Comment + The sample after having been subjected to a characterization process + Label CharacterisedSample @@ -2023,14 +1943,14 @@ ChargeDistribution Annotations - - Comment - - Preflabel ChargeDistribution + + Comment + + Label ChargeDistribution @@ -2062,14 +1982,6 @@ Chromatography Annotations - - Comment - In chemical analysis, chromatography is a laboratory technique for the separation of a mixture into its components. - - - Comment - - Preflabel Chromatography @@ -2078,6 +1990,10 @@ Chromatography Elucidation In chemical analysis, chromatography is a laboratory technique for the separation of a mixture into its components. + + Comment + In chemical analysis, chromatography is a laboratory technique for the separation of a mixture into its components. + Wikipediareference https://en.wikipedia.org/wiki/Chromatography @@ -2113,26 +2029,10 @@ Chronoamperometry Annotations - - Comment - If the potential step is from a potential at which no current flows (i.e., at which the oxidation or reduction of the electrochemically active species does not take place) to one at which the current is limited by diffusion (see diffusion-limited current), the current obeys the Cottrell equation. - - - Comment - amperometry in which the current is measured as a function of time after a change in the applied potential - - - Comment - - Preflabel Chronoamperometry - - Elucidation - amperometry in which the current is measured as a function of time after a change in the applied potential - Altlabel AmperiometricDetection @@ -2141,6 +2041,14 @@ Chronoamperometry Altlabel AmperometricCurrentTimeCurve + + Elucidation + Amperometry in which the current is measured as a function of time after a change in the applied potential. If the potential step is from a potential at which no current flows (i.e., at which the oxidation or reduction of the electrochemically active species does not take place) to one at which the current is limited by diffusion (see diffusion-limited current), the current obeys the Cottrell equation. + + + Comment + Amperometry in which the current is measured as a function of time after a change in the applied potential. If the potential step is from a potential at which no current flows (i.e., at which the oxidation or reduction of the electrochemically active species does not take place) to one at which the current is limited by diffusion (see diffusion-limited current), the current obeys the Cottrell equation. + Iupacreference https://doi.org/10.1515/pac-2018-0109 @@ -2176,25 +2084,17 @@ Chronocoulometry Annotations - - Comment - Chronocoulometry provides the same information that is provided by chronoamperometry, since it is based on the integration of the I-t curve. Nevertheless, chronocoulometry offers important experimental advantages, such as (i) the measured signal usually increases with time and hence the later parts of the transient can be detected more accurately, (ii) a better signal-to-noise ratio can be achieved, and (iii) other contributions to overall charge passed as a function of time can be discriminated from those due to the diffusion of electroactive substances. - - - Comment - direct coulometry at controlled potential in which the electric charge passed after the application of a potential step perturbation is measured as a function of time (Q-t curve) - - - Comment - - Preflabel Chronocoulometry Elucidation - direct coulometry at controlled potential in which the electric charge passed after the application of a potential step perturbation is measured as a function of time (Q-t curve) + Direct coulometry at controlled potential in which the electric charge passed after the application of a potential step perturbation is measured as a function of time (Q-t curve). Chronocoulometry provides the same information that is provided by chronoamperometry, since it is based on the integration of the I-t curve. Nevertheless, chronocoulometry offers important experimental advantages, such as (i) the measured signal usually increases with time and hence the later parts of the transient can be detected more accurately, (ii) a better signal-to-noise ratio can be achieved, and (iii) other contributions to overall charge passed as a function of time can be discriminated from those due to the diffusion of electroactive substances. + + + Comment + Direct coulometry at controlled potential in which the electric charge passed after the application of a potential step perturbation is measured as a function of time (Q-t curve). Chronocoulometry provides the same information that is provided by chronoamperometry, since it is based on the integration of the I-t curve. Nevertheless, chronocoulometry offers important experimental advantages, such as (i) the measured signal usually increases with time and hence the later parts of the transient can be detected more accurately, (ii) a better signal-to-noise ratio can be achieved, and (iii) other contributions to overall charge passed as a function of time can be discriminated from those due to the diffusion of electroactive substances. Iupacreference @@ -2231,25 +2131,17 @@ Chronopotentiometry Annotations - - Comment - The change in applied current is usually a step, but cyclic current reversals or linearly increasing currents are also used. - - - Comment - potentiometry in which the potential is measured with time following a change in applied current - - - Comment - - Preflabel Chronopotentiometry Elucidation - potentiometry in which the potential is measured with time following a change in applied current + Potentiometry in which the potential is measured with time following a change in applied current. The change in applied current is usually a step, but cyclic current reversals or linearly increasing currents are also used. + + + Comment + Potentiometry in which the potential is measured with time following a change in applied current. The change in applied current is usually a step, but cyclic current reversals or linearly increasing currents are also used. Iupacreference @@ -2286,14 +2178,6 @@ CompressionTesting Annotations - - Comment - Compression tests characterize material and product strength and stiffness under applied crushing loads. These tests are typically conducted by applying compressive pressure to a test specimen using platens or specialized fixtures with a testing machine that produces compressive loads. - - - Comment - - Preflabel CompressionTesting @@ -2302,6 +2186,10 @@ CompressionTesting Elucidation Compression tests characterize material and product strength and stiffness under applied crushing loads. These tests are typically conducted by applying compressive pressure to a test specimen using platens or specialized fixtures with a testing machine that produces compressive loads. + + Comment + Compression tests characterize material and product strength and stiffness under applied crushing loads. These tests are typically conducted by applying compressive pressure to a test specimen using platens or specialized fixtures with a testing machine that produces compressive loads. + Label CompressionTesting @@ -2333,42 +2221,26 @@ ConductometricTitration Annotations - - Comment - The equivalence-point is obtained as the intersection of linear parts of the conductance G, versus titrant volume V, curve (see - - - Comment - The method can be used for deeply coloured or turbid solutions. Acid-base and precipita- tion reactions are most frequently used. - - - Comment - The method is based on replacing an ionic species of the analyte with another species, cor- responding to the titrant or the product with significantly different conductance. - - - Comment - titration in which the electric conductivity of a solution is measured as a function of the amount of titrant added - - - Comment - - Preflabel ConductometricTitration Elucidation - titration in which the electric conductivity of a solution is measured as a function of the amount of titrant added + Titration in which the electric conductivity of a solution is measured as a function of the amount of titrant added. The equivalence-point is obtained as the intersection of linear parts of the conductance G, versus titrant volume V, curve. The method can be used for deeply coloured or turbid solutions. Acid-base and precipitation reactions are most frequently used. The method is based on replacing an ionic species of the analyte with another species, cor- responding to the titrant or the product with significantly different conductance. - Iupacreference - https://doi.org/10.1515/pac-2018-0109 + Comment + Titration in which the electric conductivity of a solution is measured as a function of the amount of titrant added. The equivalence-point is obtained as the intersection of linear parts of the conductance G, versus titrant volume V, curve. The method can be used for deeply coloured or turbid solutions. Acid-base and precipitation reactions are most frequently used. The method is based on replacing an ionic species of the analyte with another species, cor- responding to the titrant or the product with significantly different conductance. Wikidatareference https://www.wikidata.org/wiki/Q11778221 + + Iupacreference + https://doi.org/10.1515/pac-2018-0109 + Label ConductometricTitration @@ -2401,24 +2273,24 @@ Conductometry Annotations - Comment - The conductivity of a solution depends on the concentration and nature of ions present. + Preflabel + Conductometry - Comment - measurement principle in which the electric conductivity of a solution is measured + Elucidation + Measurement principle in which the electric conductivity of a solution is measured. The conductivity of a solution depends on the concentration and nature of ions present. Comment - + Measurement principle in which the electric conductivity of a solution is measured. The conductivity of a solution depends on the concentration and nature of ions present. - Preflabel - Conductometry + Wikipediareference + https://en.wikipedia.org/wiki/Conductometry - Elucidation - measurement principle in which the electric conductivity of a solution is measured + Wikidatareference + https://www.wikidata.org/wiki/Q901180 Example @@ -2428,14 +2300,6 @@ Conductometry Iupacreference https://doi.org/10.1515/pac-2018-0109 - - Wikidatareference - https://www.wikidata.org/wiki/Q901180 - - - Wikipediareference - https://en.wikipedia.org/wiki/Conductometry - Label Conductometry @@ -2467,14 +2331,6 @@ ConfocalMicroscopy Annotations - - Comment - Confocal microscopy, most frequently confocal laser scanning microscopy (CLSM) or laser scanning confocal microscopy (LSCM), is an optical imaging technique for increasing optical resolution and contrast of a micrograph by means of using a spatial pinhole to block out-of-focus light in image formation. - - - Comment - - Preflabel ConfocalMicroscopy @@ -2483,6 +2339,10 @@ ConfocalMicroscopy Elucidation Confocal microscopy, most frequently confocal laser scanning microscopy (CLSM) or laser scanning confocal microscopy (LSCM), is an optical imaging technique for increasing optical resolution and contrast of a micrograph by means of using a spatial pinhole to block out-of-focus light in image formation. + + Comment + Confocal microscopy, most frequently confocal laser scanning microscopy (CLSM) or laser scanning confocal microscopy (LSCM), is an optical imaging technique for increasing optical resolution and contrast of a micrograph by means of using a spatial pinhole to block out-of-focus light in image formation. + Label ConfocalMicroscopy @@ -2514,29 +2374,17 @@ CoulometricTitration Annotations - - Comment - Coulometric titrations are usually carried out in convective mass transfer mode using a large surface working electrode. The reference and auxiliary electrodes are located in sepa- rate compartments. A basic requirement is a 100 % current efficiency of titrant generation at the working electrode. End-point detection can be accomplished with potentiometry, amperometry, biamperometry, bipotentiometry, photometry, or by using a visual indicator. - - - Comment - The main advantages are that titration is possible with less stable titrants, the standardi- zation of titrant is not necessary, the volume of the test solution is not changed, and the method is easily automated. - - - Comment - titration in which the titrant is generated electrochemically, either by constant current or at constant potential. The titrant reacts stoichiometrically with the analyte, the amount of which is calculated using Faraday’s laws of electrolysis from the electric charge required to reach the end-point - - - Comment - - Preflabel CoulometricTitration Elucidation - titration in which the titrant is generated electrochemically, either by constant current or at constant potential. The titrant reacts stoichiometrically with the analyte, the amount of which is calculated using Faraday’s laws of electrolysis from the electric charge required to reach the end-point + Titration in which the titrant is generated electrochemically, either by constant current or at constant potential. The titrant reacts stoichiometrically with the analyte, the amount of which is calculated using Faraday’s laws of electrolysis from the electric charge required to reach the end-point. Coulometric titrations are usually carried out in convective mass transfer mode using a large surface working electrode. The reference and auxiliary electrodes are located in sepa- rate compartments. A basic requirement is a 100 % current efficiency of titrant generation at the working electrode. End-point detection can be accomplished with potentiometry, amperometry, biamperometry, bipotentiometry, photometry, or by using a visual indicator. The main advantages are that titration is possible with less stable titrants, the standardi- zation of titrant is not necessary, the volume of the test solution is not changed, and the method is easily automated. + + + Comment + Titration in which the titrant is generated electrochemically, either by constant current or at constant potential. The titrant reacts stoichiometrically with the analyte, the amount of which is calculated using Faraday’s laws of electrolysis from the electric charge required to reach the end-point. Coulometric titrations are usually carried out in convective mass transfer mode using a large surface working electrode. The reference and auxiliary electrodes are located in sepa- rate compartments. A basic requirement is a 100 % current efficiency of titrant generation at the working electrode. End-point detection can be accomplished with potentiometry, amperometry, biamperometry, bipotentiometry, photometry, or by using a visual indicator. The main advantages are that titration is possible with less stable titrants, the standardi- zation of titrant is not necessary, the volume of the test solution is not changed, and the method is easily automated. Label @@ -2570,45 +2418,33 @@ Coulometry Annotations - Comment - Coulometry used to measure the amount of substance is a primary reference measurement procedure [VIM 2.8] not requiring calibration with a standard for a quantity of the same kind (i.e. amount of substance). - - - Comment - The coulometric experiment can be carried out at controlled (constant) potential (see direct coulometry at controlled potential) or controlled (constant) current (see direct coulometry at controlled current). + Preflabel + Coulometry - Comment - electrochemical measurement principle in which the electric charge required to carry out a known electrochemical reaction is measured. By Faraday’s laws of electrolysis, the amount of substance is proportional to the charge + Elucidation + Electrochemical measurement principle in which the electric charge required to carry out a known electrochemical reaction is measured. By Faraday’s laws of electrolysis, the amount of substance is proportional to the charge. Coulometry used to measure the amount of substance is a primary reference measurement procedure [VIM 2.8] not requiring calibration with a standard for a quantity of the same kind (i.e. amount of substance). The coulometric experiment can be carried out at controlled (constant) potential (see direct coulometry at controlled potential) or controlled (constant) current (see direct coulometry at controlled current). Comment - + Electrochemical measurement principle in which the electric charge required to carry out a known electrochemical reaction is measured. By Faraday’s laws of electrolysis, the amount of substance is proportional to the charge. Coulometry used to measure the amount of substance is a primary reference measurement procedure [VIM 2.8] not requiring calibration with a standard for a quantity of the same kind (i.e. amount of substance). The coulometric experiment can be carried out at controlled (constant) potential (see direct coulometry at controlled potential) or controlled (constant) current (see direct coulometry at controlled current). - Preflabel - Coulometry + Wikipediareference + https://en.wikipedia.org/wiki/Coulometry - Elucidation - electrochemical measurement principle in which the electric charge required to carry out a known electrochemical reaction is measured. By Faraday’s laws of electrolysis, the amount of substance is proportional to the charge + Wikidatareference + https://www.wikidata.org/wiki/Q1136979 Iupacreference https://doi.org/10.1515/pac-2018-0109 - - Wikidatareference - https://www.wikidata.org/wiki/Q1136979 - Ievreference https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-04-13 - - Wikipediareference - https://en.wikipedia.org/wiki/Coulometry - Label Coulometry @@ -2640,14 +2476,6 @@ CreepTesting Annotations - - Comment - The creep test is a destructive materials testing method for determination of the long-term strength and heat resistance of a material. When running a creep test, the specimen is subjected to increased temperature conditions for an extended period of time and loaded with a constant tensile force or tensile stress. - - - Comment - - Preflabel CreepTesting @@ -2656,6 +2484,10 @@ CreepTesting Elucidation The creep test is a destructive materials testing method for determination of the long-term strength and heat resistance of a material. When running a creep test, the specimen is subjected to increased temperature conditions for an extended period of time and loaded with a constant tensile force or tensile stress. + + Comment + The creep test is a destructive materials testing method for determination of the long-term strength and heat resistance of a material. When running a creep test, the specimen is subjected to increased temperature conditions for an extended period of time and loaded with a constant tensile force or tensile stress. + Label CreepTesting @@ -2687,14 +2519,14 @@ CriticalAndSupercriticalChromatography Annotations - - Comment - - Preflabel CriticalAndSupercriticalChromatography + + Comment + + Label CriticalAndSupercriticalChromatography @@ -2726,22 +2558,22 @@ CyclicChronopotentiometry Annotations - - Comment - chronopotentiometry where the change in applied current undergoes a cyclic current reversal - - - Comment - - Preflabel CyclicChronopotentiometry + + Elucidation + Chronopotentiometry where the change in applied current undergoes a cyclic current reversal. + Elucidation chronopotentiometry where the change in applied current undergoes a cyclic current reversal + + Comment + Chronopotentiometry where the change in applied current undergoes a cyclic current reversal. + Label CyclicChronopotentiometry @@ -2774,60 +2606,40 @@ CyclicVoltammetry Annotations - Comment - Cyclic voltammetry is frequently used for the investigation of mechanisms of electrochemi- cal/electrode reactions. The current-potential curve may be modelled to obtain reaction mechanisms and electrochemical parameters. - - - Comment - Normally the initial potential is chosen where no electrode reaction occurs and the switch- ing potential is greater (more positive for an oxidation or more negative for a reduction) than the peak potential of the analyte reaction. - - - Comment - The initial potential is usually the negative or positive limit of the cycle but can have any value between the two limits, as can the initial scan direction. The limits of the potential are known as the switching potentials. + Preflabel + CyclicVoltammetry - Comment - The plot of current against potential is termed a cyclic voltammogram. Usually peak-shaped responses are obtained for scans in both directions. + Altlabel + CV - Comment - voltammetry in which the electric current is recorded as the electrode potential is varied with time cycli- cally between two potential limits, normally at a constant scan rate + Elucidation + Voltammetry in which the electric current is recorded as the electrode potential is varied with time cyclically between two potential limits, normally at a constant scan rate. Cyclic voltammetry is frequently used for the investigation of mechanisms of electrochemical/electrode reactions. The current-potential curve may be modelled to obtain reaction mechanisms and electrochemical parameters. Normally the initial potential is chosen where no electrode reaction occurs and the switching potential is greater (more positive for an oxidation or more negative for a reduction) than the peak potential of the analyte reaction. The initial potential is usually the negative or positive limit of the cycle but can have any value between the two limits, as can the initial scan direction. The limits of the potential are known as the switching potentials. The plot of current against potential is termed a cyclic voltammogram. Usually peak-shaped responses are obtained for scans in both directions. Comment - + Voltammetry in which the electric current is recorded as the electrode potential is varied with time cyclically between two potential limits, normally at a constant scan rate. Cyclic voltammetry is frequently used for the investigation of mechanisms of electrochemical/electrode reactions. The current-potential curve may be modelled to obtain reaction mechanisms and electrochemical parameters. Normally the initial potential is chosen where no electrode reaction occurs and the switching potential is greater (more positive for an oxidation or more negative for a reduction) than the peak potential of the analyte reaction. The initial potential is usually the negative or positive limit of the cycle but can have any value between the two limits, as can the initial scan direction. The limits of the potential are known as the switching potentials. The plot of current against potential is termed a cyclic voltammogram. Usually peak-shaped responses are obtained for scans in both directions. - Preflabel - CyclicVoltammetry + Wikipediareference + https://en.wikipedia.org/wiki/Cyclic_voltammetry - Elucidation - voltammetry in which the electric current is recorded as the electrode potential is varied with time cycli- cally between two potential limits, normally at a constant scan rate + Wikidatareference + https://www.wikidata.org/wiki/Q1147647 - Altlabel - CV + Dbpediareference + https://dbpedia.org/page/Cyclic_voltammetry Iupacreference https://doi.org/10.1515/pac-2018-0109 - Dbpediareference - https://dbpedia.org/page/Cyclic_voltammetry - - - Wikidatareference - https://www.wikidata.org/wiki/Q1147647 - - - Wikipediareference - https://en.wikipedia.org/wiki/Cyclic_voltammetry - - - Label - CyclicVoltammetry + Label + CyclicVoltammetry Formal description @@ -2856,33 +2668,17 @@ DCPolarography Annotations - - Comment - If the whole scan is performed on a single growing drop, the technique should be called single drop scan voltammetry. The term polarography in this context is discouraged. - - - Comment - This is the oldest variant of polarographic techniques, introduced by Jaroslav Heyrovský (1890 – 1967). - - - Comment - Usually the drop time is between 1 and 5 s and the pseudo-steady-state wave-shaped dependence on potential is called a polarogram. If the limiting current is controlled by dif- fusion, it is expressed by the Ilkovich equation. - - - Comment - linear scan voltammetry with slow scan rate in which a dropping mercury electrode is used as the working electrode - - - Comment - - Preflabel DCPolarography Elucidation - linear scan voltammetry with slow scan rate in which a dropping mercury electrode is used as the working electrode + Linear scan voltammetry with slow scan rate in which a dropping mercury electrode is used as the working electrode. If the whole scan is performed on a single growing drop, the technique should be called single drop scan voltammetry. The term polarography in this context is discouraged. This is the oldest variant of polarographic techniques, introduced by Jaroslav Heyrovský (1890 – 1967). Usually the drop time is between 1 and 5 s and the pseudo-steady-state wave-shaped dependence on potential is called a polarogram. If the limiting current is controlled by diffusion, it is expressed by the Ilkovich equation. + + + Comment + Linear scan voltammetry with slow scan rate in which a dropping mercury electrode is used as the working electrode. If the whole scan is performed on a single growing drop, the technique should be called single drop scan voltammetry. The term polarography in this context is discouraged. This is the oldest variant of polarographic techniques, introduced by Jaroslav Heyrovský (1890 – 1967). Usually the drop time is between 1 and 5 s and the pseudo-steady-state wave-shaped dependence on potential is called a polarogram. If the limiting current is controlled by diffusion, it is expressed by the Ilkovich equation. Iupacreference @@ -2919,21 +2715,17 @@ DataAcquisitionRate Annotations - - Comment - Quantify the raw data acquisition rate, if applicable. - - - Comment - - Preflabel DataAcquisitionRate Elucidation - Quantify the raw data acquisition rate, if applicable. + Quantifies the raw data acquisition rate, if applicable. + + + Comment + Quantifies the raw data acquisition rate, if applicable. Label @@ -2966,14 +2758,6 @@ DataAnalysis Annotations - - Comment - Data processing activities performed on the secondary data to determine the characterisation property (e.g. classification, quantification), which can be performed manually or exploiting a model. - - - Comment - - Preflabel DataAnalysis @@ -2982,6 +2766,10 @@ DataAnalysis Elucidation Data processing activities performed on the secondary data to determine the characterisation property (e.g. classification, quantification), which can be performed manually or exploiting a model. + + Comment + Data processing activities performed on the secondary data to determine the characterisation property (e.g. classification, quantification), which can be performed manually or exploiting a model. + Label DataAnalysis @@ -3013,10 +2801,6 @@ DataFiltering Annotations - - Comment - Data filtering is the process of examining a dataset to exclude, rearrange, or apportion data according to certain criteria. - Preflabel DataFiltering @@ -3025,6 +2809,10 @@ DataFiltering Elucidation Data filtering is the process of examining a dataset to exclude, rearrange, or apportion data according to certain criteria. + + Comment + Data filtering is the process of examining a dataset to exclude, rearrange, or apportion data according to certain criteria. + Label DataFiltering @@ -3057,11 +2845,11 @@ DataNormalisation Annotations - Comment - It involves the creation of shifted and/or scaled versions of the values to allow post-processing in a way that eliminates the effects of influences on subsequent properties extraction. + Preflabel + DataNormalisation - Comment + Elucidation Data normalization involves adjusting raw data to a notionally common scale. @@ -3070,15 +2858,11 @@ DataNormalisation Comment - - - - Preflabel - DataNormalisation + Data normalization involves adjusting raw data to a notionally common scale. - Elucidation - Data normalization involves adjusting raw data to a notionally common scale. + Comment + It involves the creation of shifted and/or scaled versions of the values to allow post-processing in a way that eliminates the effects of influences on subsequent properties extraction. Label @@ -3111,10 +2895,6 @@ DataPostProcessing Annotations - - Comment - Analysis, that allows one to calculate the final material property from the calibrated primary data. - Preflabel DataPostProcessing @@ -3123,6 +2903,10 @@ DataPostProcessing Elucidation Analysis, that allows one to calculate the final material property from the calibrated primary data. + + Comment + Analysis, that allows one to calculate the final material property from the calibrated primary data. + Label DataPostProcessing @@ -3154,10 +2938,6 @@ DataPreparation Annotations - - Comment - Data preparation is the process of manipulating (or pre-processing) data (which may come from disparate data sources) to improve their quality or reduce bias in subsequent analysis. - Preflabel DataPreparation @@ -3166,6 +2946,10 @@ DataPreparation Elucidation Data preparation is the process of manipulating (or pre-processing) data (which may come from disparate data sources) to improve their quality or reduce bias in subsequent analysis. + + Comment + Data preparation is the process of manipulating (or pre-processing) data (which may come from disparate data sources) to improve their quality or reduce bias in subsequent analysis. + Label DataPreparation @@ -3197,14 +2981,6 @@ DataProcessingThroughCalibration Annotations - - Comment - Describes how raw data are corrected and/or modified through calibrations. - - - Comment - - Preflabel DataProcessingThroughCalibration @@ -3213,6 +2989,10 @@ DataProcessingThroughCalibration Elucidation Describes how raw data are corrected and/or modified through calibrations. + + Comment + Describes how raw data are corrected and/or modified through calibrations. + Label DataProcessingThroughCalibration @@ -3244,14 +3024,6 @@ DataQuality Annotations - - Comment - Evaluation of quality indicators to determine how well suited a data set is to be used for the characterisation of a material. - - - Comment - - Preflabel DataQuality @@ -3260,6 +3032,10 @@ DataQuality Elucidation Evaluation of quality indicators to determine how well suited a data set is to be used for the characterisation of a material. + + Comment + Evaluation of quality indicators to determine how well suited a data set is to be used for the characterisation of a material. + Example Example evaluation of S/N ratio, or other quality indicators (limits of detection/quantification, statistical analysis of data, data robustness analysis) @@ -3295,14 +3071,6 @@ Detector Annotations - - Comment - Physical device (or the chain of devices) that is used to measure, quantify and store the signal after its interaction with the sample. - - - Comment - - Preflabel Detector @@ -3311,6 +3079,10 @@ Detector Elucidation Physical device (or the chain of devices) that is used to measure, quantify and store the signal after its interaction with the sample. + + Comment + Physical device (or the chain of devices) that is used to measure, quantify and store the signal after its interaction with the sample. + Example Back Scattered Electrons (BSE) and Secondary Electrons (SE) detectors for SEM @@ -3350,14 +3122,6 @@ DielectricAndImpedanceSpectroscopy Annotations - - Comment - Dielectric spectroscopy (DS) or impedance spectroscopy, also known as electrochemical impedance spectroscopy, is frequently used to study the response of a sample subjected to an applied electric field of fixed or changing frequency. DS describes the dielectric properties of a material as a function of frequency. In DS, the radio and microwave frequency regions of the electromagnetic spectrum have been successfully made to interact with materials, so as to study the behavior of molecules. The interaction of applied alternating electric fields with dipoles possessing reorientation mobility in materials is also dealt by DS. - - - Comment - - Preflabel DielectricAndImpedanceSpectroscopy @@ -3366,6 +3130,10 @@ DielectricAndImpedanceSpectroscopy Elucidation Dielectric spectroscopy (DS) or impedance spectroscopy, also known as electrochemical impedance spectroscopy, is frequently used to study the response of a sample subjected to an applied electric field of fixed or changing frequency. DS describes the dielectric properties of a material as a function of frequency. In DS, the radio and microwave frequency regions of the electromagnetic spectrum have been successfully made to interact with materials, so as to study the behavior of molecules. The interaction of applied alternating electric fields with dipoles possessing reorientation mobility in materials is also dealt by DS. + + Comment + Dielectric spectroscopy (DS) or impedance spectroscopy, also known as electrochemical impedance spectroscopy, is frequently used to study the response of a sample subjected to an applied electric field of fixed or changing frequency. DS describes the dielectric properties of a material as a function of frequency. In DS, the radio and microwave frequency regions of the electromagnetic spectrum have been successfully made to interact with materials, so as to study the behavior of molecules. The interaction of applied alternating electric fields with dipoles possessing reorientation mobility in materials is also dealt by DS. + Label DielectricAndImpedanceSpectroscopy @@ -3397,29 +3165,17 @@ Dielectrometry Annotations - - Comment - Dielectrometric titrations use dielectrometry for the end-point detection. - - - Comment - The method is used to monitor the purity of dielectrics, for example to detect small amounts of moisture. - - - Comment - electrochemical measurement principle based on the measurement of the dielectric constant of a sample resulting from the orientation of particles (molecules or ions) that have a dipole moment in an electric field - - - Comment - - Preflabel Dielectrometry Elucidation - electrochemical measurement principle based on the measurement of the dielectric constant of a sample resulting from the orientation of particles (molecules or ions) that have a dipole moment in an electric field + Electrochemical measurement principle based on the measurement of the dielectric constant of a sample resulting from the orientation of particles (molecules or ions) that have a dipole moment in an electric field. Dielectrometric titrations use dielectrometry for the end-point detection. The method is used to monitor the purity of dielectrics, for example to detect small amounts of moisture. + + + Comment + Electrochemical measurement principle based on the measurement of the dielectric constant of a sample resulting from the orientation of particles (molecules or ions) that have a dipole moment in an electric field. Dielectrometric titrations use dielectrometry for the end-point detection. The method is used to monitor the purity of dielectrics, for example to detect small amounts of moisture. Iupacreference @@ -3456,14 +3212,6 @@ DifferentialLinearPulseVoltammetry Annotations - - Comment - Differential Pulse Voltammetry in which small potential pulses are superimposed onto a linearly varying potential. - - - Comment - - Preflabel DifferentialLinearPulseVoltammetry @@ -3472,6 +3220,10 @@ DifferentialLinearPulseVoltammetry Elucidation Differential Pulse Voltammetry in which small potential pulses are superimposed onto a linearly varying potential. + + Comment + Differential Pulse Voltammetry in which small potential pulses are superimposed onto a linearly varying potential. + Label DifferentialLinearPulseVoltammetry @@ -3503,49 +3255,33 @@ DifferentialPulseVoltammetry Annotations - - Comment - Differential pulse polarography is differential pulse voltammetry in which a dropping mercury electrode is used as the working electrode. A pulse is applied before the mechani- cally enforced end of the drop and the current is sampled twice: just before the onset of the pulse and just before its end. The pulse width is usually 10 to 20 % of the drop life. The drop dislodgement is synchronized with current sampling, which is carried out as in DPV. - - - Comment - The ratio of faradaic current to charging current is enhanced and the negative influence of charging current is partially eliminated in the same way as in normal pulse voltammetry (NPV). Moreover, subtraction of the charging current sampled before the application of the pulse further decreases its negative influence. Due to the more enhanced signal (faradaic current) to noise (charging current) ratio, the limit of detection is lower than with NPV. - - - Comment - The sensitivity of DPV depends on the reversibility of the electrode reaction of the analyte. - - - Comment - voltammetry in which small potential pulses (constant height 10 to 100 mV, constant width 10 to 100 ms) are superimposed onto a linearly varying potential or onto a staircase potential ramp. The current is sampled just before the onset of the pulse (e.g. 10 to 20 ms) and for the same sampling time just before the end of the pulse. The difference between the two sampled currents is plotted versus the potential applied before the pulse. Thus, a differential pulse voltammogram is peak-shaped - - - Comment - - Preflabel DifferentialPulseVoltammetry + + Altlabel + DPV + Elucidation - voltammetry in which small potential pulses (constant height 10 to 100 mV, constant width 10 to 100 ms) are superimposed onto a linearly varying potential or onto a staircase potential ramp. The current is sampled just before the onset of the pulse (e.g. 10 to 20 ms) and for the same sampling time just before the end of the pulse. The difference between the two sampled currents is plotted versus the potential applied before the pulse. Thus, a differential pulse voltammogram is peak-shaped + Voltammetry in which small potential pulses (constant height 10 to 100 mV, constant width 10 to 100 ms) are superimposed onto a linearly varying potential or onto a staircase potential ramp. The current is sampled just before the onset of the pulse (e.g. 10 to 20 ms) and for the same sampling time just before the end of the pulse. The difference between the two sampled currents is plotted versus the potential applied before the pulse. Thus, a differential pulse voltammogram is peak-shaped. Differential pulse polarography is differential pulse voltammetry in which a dropping mercury electrode is used as the working electrode. A pulse is applied before the mechani- cally enforced end of the drop and the current is sampled twice: just before the onset of the pulse and just before its end. The pulse width is usually 10 to 20 % of the drop life. The drop dislodgement is synchronized with current sampling, which is carried out as in DPV. The ratio of faradaic current to charging current is enhanced and the negative influence of charging current is partially eliminated in the same way as in normal pulse voltammetry (NPV). Moreover, subtraction of the charging current sampled before the application of the pulse further decreases its negative influence. Due to the more enhanced signal (faradaic current) to noise (charging current) ratio, the limit of detection is lower than with NPV. The sensitivity of DPV depends on the reversibility of the electrode reaction of the analyte. - Altlabel - DPV + Comment + Voltammetry in which small potential pulses (constant height 10 to 100 mV, constant width 10 to 100 ms) are superimposed onto a linearly varying potential or onto a staircase potential ramp. The current is sampled just before the onset of the pulse (e.g. 10 to 20 ms) and for the same sampling time just before the end of the pulse. The difference between the two sampled currents is plotted versus the potential applied before the pulse. Thus, a differential pulse voltammogram is peak-shaped. Differential pulse polarography is differential pulse voltammetry in which a dropping mercury electrode is used as the working electrode. A pulse is applied before the mechani- cally enforced end of the drop and the current is sampled twice: just before the onset of the pulse and just before its end. The pulse width is usually 10 to 20 % of the drop life. The drop dislodgement is synchronized with current sampling, which is carried out as in DPV. The ratio of faradaic current to charging current is enhanced and the negative influence of charging current is partially eliminated in the same way as in normal pulse voltammetry (NPV). Moreover, subtraction of the charging current sampled before the application of the pulse further decreases its negative influence. Due to the more enhanced signal (faradaic current) to noise (charging current) ratio, the limit of detection is lower than with NPV. The sensitivity of DPV depends on the reversibility of the electrode reaction of the analyte. - Iupacreference - https://doi.org/10.1515/pac-2018-0109 + Wikipediareference + https://en.wikipedia.org/wiki/Differential_pulse_voltammetry Wikidatareference https://www.wikidata.org/wiki/Q5275361 - Wikipediareference - https://en.wikipedia.org/wiki/Differential_pulse_voltammetry + Iupacreference + https://doi.org/10.1515/pac-2018-0109 Label @@ -3578,14 +3314,14 @@ DifferentialRefractiveIndex Annotations - - Comment - - Preflabel DifferentialRefractiveIndex + + Comment + + Label DifferentialRefractiveIndex @@ -3617,25 +3353,21 @@ DifferentialScanningCalorimetry Annotations - - Comment - Differential scanning calorimetry (DSC) is a thermoanalytical technique in which the difference in the amount of heat required to increase the temperature of a sample and reference is measured as a function of temperature. Both the sample and reference are maintained at nearly the same temperature throughout the experiment. Generally, the temperature program for a DSC analysis is designed such that the sample holder temperature increases linearly as a function of time. The reference sample should have a well-defined heat capacity over the range of temperatures to be scanned. Additionally, the reference sample must be stable, of high purity, and must not experience much change across the temperature scan. Typically, reference standards have been metals such as indium, tin, bismuth, and lead, but other standards such as polyethylene and fatty acids have been proposed to study polymers and organic compounds, respectively. - - - Comment - - Preflabel DifferentialScanningCalorimetry + + Altlabel + DSC + Elucidation Differential scanning calorimetry (DSC) is a thermoanalytical technique in which the difference in the amount of heat required to increase the temperature of a sample and reference is measured as a function of temperature. Both the sample and reference are maintained at nearly the same temperature throughout the experiment. Generally, the temperature program for a DSC analysis is designed such that the sample holder temperature increases linearly as a function of time. The reference sample should have a well-defined heat capacity over the range of temperatures to be scanned. Additionally, the reference sample must be stable, of high purity, and must not experience much change across the temperature scan. Typically, reference standards have been metals such as indium, tin, bismuth, and lead, but other standards such as polyethylene and fatty acids have been proposed to study polymers and organic compounds, respectively. - Altlabel - DSC + Comment + Differential scanning calorimetry (DSC) is a thermoanalytical technique in which the difference in the amount of heat required to increase the temperature of a sample and reference is measured as a function of temperature. Both the sample and reference are maintained at nearly the same temperature throughout the experiment. Generally, the temperature program for a DSC analysis is designed such that the sample holder temperature increases linearly as a function of time. The reference sample should have a well-defined heat capacity over the range of temperatures to be scanned. Additionally, the reference sample must be stable, of high purity, and must not experience much change across the temperature scan. Typically, reference standards have been metals such as indium, tin, bismuth, and lead, but other standards such as polyethylene and fatty acids have been proposed to study polymers and organic compounds, respectively. Label @@ -3668,14 +3400,6 @@ DifferentialStaircasePulseVoltammetry Annotations - - Comment - Differential Pulse Voltammetry in which small potential pulses are superimposed onto a staircase potential ramp. - - - Comment - - Preflabel DifferentialStaircasePulseVoltammetry @@ -3684,6 +3408,10 @@ DifferentialStaircasePulseVoltammetry Elucidation Differential Pulse Voltammetry in which small potential pulses are superimposed onto a staircase potential ramp. + + Comment + Differential Pulse Voltammetry in which small potential pulses are superimposed onto a staircase potential ramp. + Label DifferentialStaircasePulseVoltammetry @@ -3715,25 +3443,21 @@ DifferentialThermalAnalysis Annotations - - Comment - Differential thermal analysis (DTA) is a thermoanalytic technique that is similar to differential scanning calorimetry. In DTA, the material under study and an inert reference are made to undergo identical thermal cycles, (i.e., same cooling or heating programme) while recording any temperature difference between sample and reference.[1] This differential temperature is then plotted against time, or against temperature (DTA curve, or thermogram). Changes in the sample, either exothermic or endothermic, can be detected relative to the inert reference. Thus, a DTA curve provides data on the transformations that have occurred, such as glass transitions, crystallization, melting and sublimation. The area under a DTA peak is the enthalpy change and is not affected by the heat capacity of the sample. - - - Comment - - Preflabel DifferentialThermalAnalysis + + Altlabel + DTA + Elucidation Differential thermal analysis (DTA) is a thermoanalytic technique that is similar to differential scanning calorimetry. In DTA, the material under study and an inert reference are made to undergo identical thermal cycles, (i.e., same cooling or heating programme) while recording any temperature difference between sample and reference.[1] This differential temperature is then plotted against time, or against temperature (DTA curve, or thermogram). Changes in the sample, either exothermic or endothermic, can be detected relative to the inert reference. Thus, a DTA curve provides data on the transformations that have occurred, such as glass transitions, crystallization, melting and sublimation. The area under a DTA peak is the enthalpy change and is not affected by the heat capacity of the sample. - Altlabel - DTA + Comment + Differential thermal analysis (DTA) is a thermoanalytic technique that is similar to differential scanning calorimetry. In DTA, the material under study and an inert reference are made to undergo identical thermal cycles, (i.e., same cooling or heating programme) while recording any temperature difference between sample and reference.[1] This differential temperature is then plotted against time, or against temperature (DTA curve, or thermogram). Changes in the sample, either exothermic or endothermic, can be detected relative to the inert reference. Thus, a DTA curve provides data on the transformations that have occurred, such as glass transitions, crystallization, melting and sublimation. The area under a DTA peak is the enthalpy change and is not affected by the heat capacity of the sample. Label @@ -3767,19 +3491,15 @@ Dilatometry Annotations - Comment - Dilatometry is a method for characterising the dimensional changes of materials with variation of temperature conditions. + Preflabel + Dilatometry - Comment - - - - Preflabel - Dilatometry + Elucidation + Dilatometry is a method for characterising the dimensional changes of materials with variation of temperature conditions. - Elucidation + Comment Dilatometry is a method for characterising the dimensional changes of materials with variation of temperature conditions. @@ -3813,6 +3533,14 @@ DirectCoulometryAtControlledCurrent Annotations + + Preflabel + DirectCoulometryAtControlledCurrent + + + Elucidation + coulometry at an imposed, constant current in the electrochemical cell + Comment Direct coulometry at controlled current is usually carried out in convective mass transfer mode. The end-point of the electrolysis, at which the current is stopped, must be determined either from the inflection point in the E–t curve or by using visual or objective end-point indi- cation, similar to volumetric methods. The total electric charge is calculated as the product of the constant current and time of electrolysis or can be measured directly using a coulometer. @@ -3829,14 +3557,6 @@ DirectCoulometryAtControlledCurrent Comment - - Preflabel - DirectCoulometryAtControlledCurrent - - - Elucidation - coulometry at an imposed, constant current in the electrochemical cell - Label DirectCoulometryAtControlledCurrent @@ -3868,6 +3588,14 @@ DirectCoulometryAtControlledPotential Annotations + + Preflabel + DirectCoulometryAtControlledPotential + + + Elucidation + coulometry at a preselected constant potential of the working electrode + Comment Direct coulometry at controlled potential is usually carried out in convective mass trans- fer mode using a large surface working electrode. Reference and auxiliary electrodes are placed in separate compartments. The total electric charge is obtained by integration of the I–t curve or can be measured directly using a coulometer. @@ -3884,14 +3612,6 @@ DirectCoulometryAtControlledPotential Comment - - Preflabel - DirectCoulometryAtControlledPotential - - - Elucidation - coulometry at a preselected constant potential of the working electrode - Iupacreference https://doi.org/10.1515/pac-2018-0109 @@ -3927,14 +3647,6 @@ DirectCurrentInternalResistance Annotations - - Comment - method of determining the internal resistance of an electrochemical cell by applying a low current followed by higher current within a short period, and then record the changes of battery voltage and current - - - Comment - - Preflabel DirectCurrentInternalResistance @@ -3943,6 +3655,14 @@ DirectCurrentInternalResistance Elucidation method of determining the internal resistance of an electrochemical cell by applying a low current followed by higher current within a short period, and then record the changes of battery voltage and current + + Comment + method of determining the internal resistance of an electrochemical cell by applying a low current followed by higher current within a short period, and then record the changes of battery voltage and current + + + Comment + + Label DirectCurrentInternalResistance @@ -3975,24 +3695,24 @@ DynamicLightScattering Annotations - Comment - Dynamic light scattering (DLS) is a technique in physics that can be used to determine the size distribution profile of small particles in suspension or polymers in solution. In the scope of DLS, temporal fluctuations are usually analyzed using the intensity or photon auto-correlation function (also known as photon correlation spectroscopy - PCS or quasi-elastic light scattering - QELS). + Preflabel + DynamicLightScattering - Comment - + Altlabel + DLS - Preflabel - DynamicLightScattering + Elucidation + Dynamic light scattering (DLS) is a technique in physics that can be used to determine the size distribution profile of small particles in suspension or polymers in solution. In the scope of DLS, temporal fluctuations are usually analyzed using the intensity or photon auto-correlation function (also known as photon correlation spectroscopy - PCS or quasi-elastic light scattering - QELS). - Elucidation + Comment Dynamic light scattering (DLS) is a technique in physics that can be used to determine the size distribution profile of small particles in suspension or polymers in solution. In the scope of DLS, temporal fluctuations are usually analyzed using the intensity or photon auto-correlation function (also known as photon correlation spectroscopy - PCS or quasi-elastic light scattering - QELS). - Altlabel - DLS + Comment + Label @@ -4025,14 +3745,6 @@ DynamicMechanicalAnalysis Annotations - - Comment - Dynamic mechanical analysis (abbreviated DMA) is a characterisation technique where a sinusoidal stress is applied and the strain in the material is measured, allowing one to determine the complex modulus. The temperature of the sample or the frequency of the stress are often varied, leading to variations in the complex modulus; this approach can be used to locate the glass transition temperature[1] of the material, as well as to identify transitions corresponding to other molecular motions. - - - Comment - - Preflabel DynamicMechanicalAnalysis @@ -4041,6 +3753,14 @@ DynamicMechanicalAnalysis Elucidation Dynamic mechanical analysis (abbreviated DMA) is a characterisation technique where a sinusoidal stress is applied and the strain in the material is measured, allowing one to determine the complex modulus. The temperature of the sample or the frequency of the stress are often varied, leading to variations in the complex modulus; this approach can be used to locate the glass transition temperature[1] of the material, as well as to identify transitions corresponding to other molecular motions. + + Comment + Dynamic mechanical analysis (abbreviated DMA) is a characterisation technique where a sinusoidal stress is applied and the strain in the material is measured, allowing one to determine the complex modulus. The temperature of the sample or the frequency of the stress are often varied, leading to variations in the complex modulus; this approach can be used to locate the glass transition temperature[1] of the material, as well as to identify transitions corresponding to other molecular motions. + + + Comment + + Label DynamicMechanicalAnalysis @@ -4073,24 +3793,24 @@ DynamicMechanicalSpectroscopy Annotations - Comment - Dynamic Mechanical Analysis (DMA) is a material characterization technique where a small deformation is applied to a sample in a cyclic manner. This allows measurement of the materials response to stress, temperature, frequency or time. The term is also used to refer to the analyzer that performs the test. + Preflabel + DynamicMechanicalSpectroscopy - Comment - + Altlabel + DMA - Preflabel - DynamicMechanicalSpectroscopy + Elucidation + Dynamic Mechanical Analysis (DMA) is a material characterization technique where a small deformation is applied to a sample in a cyclic manner. This allows measurement of the materials response to stress, temperature, frequency or time. The term is also used to refer to the analyzer that performs the test. - Elucidation + Comment Dynamic Mechanical Analysis (DMA) is a material characterization technique where a small deformation is applied to a sample in a cyclic manner. This allows measurement of the materials response to stress, temperature, frequency or time. The term is also used to refer to the analyzer that performs the test. - Altlabel - DMA + Comment + Label @@ -4123,6 +3843,18 @@ ElectrochemicalImpedanceSpectroscopy Annotations + + Preflabel + ElectrochemicalImpedanceSpectroscopy + + + Altlabel + EIS + + + Elucidation + electrochemical measurement method of the complex impedance of an electrochemical system as a function of the frequency of a small amplitude (normally 5 to 10 mV) sinusoidal voltage perturbation superimposed on a fixed value of applied potential or on the open circuit potential + Comment Impedimetric sensors are based on measurement of a concentration-dependent parameter taken from analysis of the respective electrochemical impedance spectra, or from the impedance magnitudes at a chosen fixed frequency. @@ -4140,25 +3872,13 @@ ElectrochemicalImpedanceSpectroscopy - Preflabel - ElectrochemicalImpedanceSpectroscopy - - - Elucidation - electrochemical measurement method of the complex impedance of an electrochemical system as a function of the frequency of a small amplitude (normally 5 to 10 mV) sinusoidal voltage perturbation superimposed on a fixed value of applied potential or on the open circuit potential - - - Altlabel - EIS + Wikidatareference + https://www.wikidata.org/wiki/Q3492904 Iupacreference https://doi.org/10.1515/pac-2018-0109 - - Wikidatareference - https://www.wikidata.org/wiki/Q3492904 - Label ElectrochemicalImpedanceSpectroscopy @@ -4190,6 +3910,14 @@ ElectrochemicalPiezoelectricMicrogravimetry Annotations + + Preflabel + ElectrochemicalPiezoelectricMicrogravimetry + + + Elucidation + Electrogravimetry using an electrochemical quartz crystal microbalance. + Comment Electrogravimetry using an electrochemical quartz crystal microbalance. @@ -4202,14 +3930,6 @@ ElectrochemicalPiezoelectricMicrogravimetry Comment - - Preflabel - ElectrochemicalPiezoelectricMicrogravimetry - - - Elucidation - Electrogravimetry using an electrochemical quartz crystal microbalance. - Iupacreference https://doi.org/10.1515/pac-2018-0109 @@ -4245,14 +3965,6 @@ ElectrochemicalTesting Annotations - - Comment - In electrochemical characterization, the measurement of potential, charge, or current is used to determine an analyte's concentration or to characterize an analyte's chemical reactivity - - - Comment - - Preflabel ElectrochemicalTesting @@ -4261,6 +3973,14 @@ ElectrochemicalTesting Elucidation In electrochemical characterization, the measurement of potential, charge, or current is used to determine an analyte's concentration or to characterize an analyte's chemical reactivity + + Comment + In electrochemical characterization, the measurement of potential, charge, or current is used to determine an analyte's concentration or to characterize an analyte's chemical reactivity + + + Comment + + Label ElectrochemicalTesting @@ -4293,20 +4013,24 @@ Electrogravimetry Annotations - Comment + Preflabel + Electrogravimetry + + + Elucidation method of electroanalytical chemistry used to separate by electrolyse ions of a substance and to derive the amount of this substance from the increase in mass of an electrode. Comment - + method of electroanalytical chemistry used to separate by electrolyse ions of a substance and to derive the amount of this substance from the increase in mass of an electrode. - Preflabel - Electrogravimetry + Comment + - Elucidation - method of electroanalytical chemistry used to separate by electrolyse ions of a substance and to derive the amount of this substance from the increase in mass of an electrode. + Wikipediareference + https://en.wikipedia.org/wiki/Electrogravimetry Wikidatareference @@ -4316,10 +4040,6 @@ Electrogravimetry Ievreference https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-04-14 - - Wikipediareference - https://en.wikipedia.org/wiki/Electrogravimetry - Label Electrogravimetry @@ -4352,24 +4072,24 @@ ElectronBackscatterDiffraction Annotations - Comment - Electron backscatter diffraction (EBSD) is a scanning electron microscopy (SEM) technique used to study the crystallographic structure of materials. EBSD is carried out in a scanning electron microscope equipped with an EBSD detector comprising at least a phosphorescent screen, a compact lens and a low-light camera. In this configuration, the SEM incident beam hits the tilted sample. As backscattered electrons leave the sample, they interact with the crystal's periodic atomic lattice planes and diffract according to Bragg's law at various scattering angles before reaching the phosphor screen forming Kikuchi patterns (EBSPs). EBSD spatial resolution depends on many factors, including the nature of the material under study and the sample preparation. Thus, EBSPs can be indexed to provide information about the material's grain structure, grain orientation, and phase at the micro-scale. EBSD is applied for impurities and defect studies, plastic deformation, and statistical analysis for average misorientation, grain size, and crystallographic texture. EBSD can also be combined with energy-dispersive X-ray spectroscopy (EDS), cathodoluminescence (CL), and wavelength-dispersive X-ray spectroscopy (WDS) for advanced phase identification and materials discovery. + Preflabel + ElectronBackscatterDiffraction - Comment - + Altlabel + EBSD - Preflabel - ElectronBackscatterDiffraction + Elucidation + Electron backscatter diffraction (EBSD) is a scanning electron microscopy (SEM) technique used to study the crystallographic structure of materials. EBSD is carried out in a scanning electron microscope equipped with an EBSD detector comprising at least a phosphorescent screen, a compact lens and a low-light camera. In this configuration, the SEM incident beam hits the tilted sample. As backscattered electrons leave the sample, they interact with the crystal's periodic atomic lattice planes and diffract according to Bragg's law at various scattering angles before reaching the phosphor screen forming Kikuchi patterns (EBSPs). EBSD spatial resolution depends on many factors, including the nature of the material under study and the sample preparation. Thus, EBSPs can be indexed to provide information about the material's grain structure, grain orientation, and phase at the micro-scale. EBSD is applied for impurities and defect studies, plastic deformation, and statistical analysis for average misorientation, grain size, and crystallographic texture. EBSD can also be combined with energy-dispersive X-ray spectroscopy (EDS), cathodoluminescence (CL), and wavelength-dispersive X-ray spectroscopy (WDS) for advanced phase identification and materials discovery. - Elucidation + Comment Electron backscatter diffraction (EBSD) is a scanning electron microscopy (SEM) technique used to study the crystallographic structure of materials. EBSD is carried out in a scanning electron microscope equipped with an EBSD detector comprising at least a phosphorescent screen, a compact lens and a low-light camera. In this configuration, the SEM incident beam hits the tilted sample. As backscattered electrons leave the sample, they interact with the crystal's periodic atomic lattice planes and diffract according to Bragg's law at various scattering angles before reaching the phosphor screen forming Kikuchi patterns (EBSPs). EBSD spatial resolution depends on many factors, including the nature of the material under study and the sample preparation. Thus, EBSPs can be indexed to provide information about the material's grain structure, grain orientation, and phase at the micro-scale. EBSD is applied for impurities and defect studies, plastic deformation, and statistical analysis for average misorientation, grain size, and crystallographic texture. EBSD can also be combined with energy-dispersive X-ray spectroscopy (EDS), cathodoluminescence (CL), and wavelength-dispersive X-ray spectroscopy (WDS) for advanced phase identification and materials discovery. - Altlabel - EBSD + Comment + Label @@ -4406,14 +4126,6 @@ ElectronProbeMicroanalysis Annotations - - Comment - Electron probe microanalysis (EPMA) is used for quantitative analysis of the elemental composition of solid specimens at a micrometer scale. The method uses bombardment of the specimen by keV electrons to excite characteristic X-rays from the sample, which are then detected by using wavelength-dispersive (WD) spectrometers. - - - Comment - - Preflabel ElectronProbeMicroanalysis @@ -4422,6 +4134,14 @@ ElectronProbeMicroanalysis Elucidation Electron probe microanalysis (EPMA) is used for quantitative analysis of the elemental composition of solid specimens at a micrometer scale. The method uses bombardment of the specimen by keV electrons to excite characteristic X-rays from the sample, which are then detected by using wavelength-dispersive (WD) spectrometers. + + Comment + Electron probe microanalysis (EPMA) is used for quantitative analysis of the elemental composition of solid specimens at a micrometer scale. The method uses bombardment of the specimen by keV electrons to excite characteristic X-rays from the sample, which are then detected by using wavelength-dispersive (WD) spectrometers. + + + Comment + + Label ElectronProbeMicroanalysis @@ -4453,14 +4173,6 @@ Ellipsometry Annotations - - Comment - Ellipsometry is an optical technique that uses polarised light to probe the dielectric
properties of a sample (optical system). The common application of ellipsometry is
the analysis of thin films. Through the analysis of the state of polarisation of the
light that is reflected from the sample, ellipsometry yields information on the layers that are thinner than the wavelength of the light itself, down to a single atomic
layer or less. Depending on what is already known about the sample, the technique
can probe a range of properties including layer thickness, morphology, and chemical composition. - - - Comment - - Preflabel Ellipsometry @@ -4469,6 +4181,14 @@ Ellipsometry Elucidation Ellipsometry is an optical technique that uses polarised light to probe the dielectric
properties of a sample (optical system). The common application of ellipsometry is
the analysis of thin films. Through the analysis of the state of polarisation of the
light that is reflected from the sample, ellipsometry yields information on the layers that are thinner than the wavelength of the light itself, down to a single atomic
layer or less. Depending on what is already known about the sample, the technique
can probe a range of properties including layer thickness, morphology, and chemical composition. + + Comment + Ellipsometry is an optical technique that uses polarised light to probe the dielectric
properties of a sample (optical system). The common application of ellipsometry is
the analysis of thin films. Through the analysis of the state of polarisation of the
light that is reflected from the sample, ellipsometry yields information on the layers that are thinner than the wavelength of the light itself, down to a single atomic
layer or less. Depending on what is already known about the sample, the technique
can probe a range of properties including layer thickness, morphology, and chemical composition. + + + Comment + + Label Ellipsometry @@ -4500,22 +4220,10 @@ EnergyDispersiveXraySpectroscopy Annotations - - Comment - An analytical technique used for the elemental analysis or chemical characterization of a sample. - - - Comment - - Preflabel EnergyDispersiveXraySpectroscopy - - Elucidation - An analytical technique used for the elemental analysis or chemical characterization of a sample. - Altlabel EDS @@ -4525,13 +4233,25 @@ EnergyDispersiveXraySpectroscopy EDX - Wikidatareference - https://www.wikidata.org/wiki/Q386334 + Elucidation + An analytical technique used for the elemental analysis or chemical characterization of a sample. + + + Comment + An analytical technique used for the elemental analysis or chemical characterization of a sample. + + + Comment + Wikipediareference https://en.wikipedia.org/wiki/Energy-dispersive_X-ray_spectroscopy + + Wikidatareference + https://www.wikidata.org/wiki/Q386334 + Label EnergyDispersiveXraySpectroscopy @@ -4563,14 +4283,6 @@ EnvironmentalScanningElectronMicroscopy Annotations - - Comment - The environmental scanning electron microscope (ESEM) is a scanning electron microscope (SEM) that allows for the option of collecting electron micrographs of specimens that are wet, uncoated, or both by allowing for a gaseous environment in the specimen chamber. - - - Comment - - Preflabel EnvironmentalScanningElectronMicroscopy @@ -4579,6 +4291,14 @@ EnvironmentalScanningElectronMicroscopy Elucidation The environmental scanning electron microscope (ESEM) is a scanning electron microscope (SEM) that allows for the option of collecting electron micrographs of specimens that are wet, uncoated, or both by allowing for a gaseous environment in the specimen chamber. + + Comment + The environmental scanning electron microscope (ESEM) is a scanning electron microscope (SEM) that allows for the option of collecting electron micrographs of specimens that are wet, uncoated, or both by allowing for a gaseous environment in the specimen chamber. + + + Comment + + Label EnvironmentalScanningElectronMicroscopy @@ -4610,14 +4330,6 @@ Exafs Annotations - - Comment - Extended X-ray absorption fine structure (EXAFS), along with X-ray absorption near edge structure (XANES), is a subset of X-ray absorption spectroscopy (XAS). Like other absorption spectroscopies, XAS techniques follow Beer's law. The X-ray absorption coefficient of a material as a function of energy is obtained by directing X-rays of a narrow energy range at a sample, while recording the incident and transmitted x-ray intensity, as the incident x-ray energy is incremented.
When the incident x-ray energy matches the binding energy of an electron of an atom within the sample, the number of x-rays absorbed by the sample increases dramatically, causing a drop in the transmitted x-ray intensity. This results in an absorption edge. Every element has a set of unique absorption edges corresponding to different binding energies of its electrons, giving XAS element selectivity. XAS spectra are most often collected at synchrotrons because of the high intensity of synchrotron X-ray sources allow the concentration of the absorbing element to reach as low as a few parts per million. Absorption would be undetectable if the source is too weak. Because X-rays are highly penetrating, XAS samples can be gases, solids or liquids. - - - Comment - - Preflabel Exafs @@ -4626,6 +4338,14 @@ Exafs Elucidation Extended X-ray absorption fine structure (EXAFS), along with X-ray absorption near edge structure (XANES), is a subset of X-ray absorption spectroscopy (XAS). Like other absorption spectroscopies, XAS techniques follow Beer's law. The X-ray absorption coefficient of a material as a function of energy is obtained by directing X-rays of a narrow energy range at a sample, while recording the incident and transmitted x-ray intensity, as the incident x-ray energy is incremented.
When the incident x-ray energy matches the binding energy of an electron of an atom within the sample, the number of x-rays absorbed by the sample increases dramatically, causing a drop in the transmitted x-ray intensity. This results in an absorption edge. Every element has a set of unique absorption edges corresponding to different binding energies of its electrons, giving XAS element selectivity. XAS spectra are most often collected at synchrotrons because of the high intensity of synchrotron X-ray sources allow the concentration of the absorbing element to reach as low as a few parts per million. Absorption would be undetectable if the source is too weak. Because X-rays are highly penetrating, XAS samples can be gases, solids or liquids. + + Comment + Extended X-ray absorption fine structure (EXAFS), along with X-ray absorption near edge structure (XANES), is a subset of X-ray absorption spectroscopy (XAS). Like other absorption spectroscopies, XAS techniques follow Beer's law. The X-ray absorption coefficient of a material as a function of energy is obtained by directing X-rays of a narrow energy range at a sample, while recording the incident and transmitted x-ray intensity, as the incident x-ray energy is incremented.
When the incident x-ray energy matches the binding energy of an electron of an atom within the sample, the number of x-rays absorbed by the sample increases dramatically, causing a drop in the transmitted x-ray intensity. This results in an absorption edge. Every element has a set of unique absorption edges corresponding to different binding energies of its electrons, giving XAS element selectivity. XAS spectra are most often collected at synchrotrons because of the high intensity of synchrotron X-ray sources allow the concentration of the absorbing element to reach as low as a few parts per million. Absorption would be undetectable if the source is too weak. Because X-rays are highly penetrating, XAS samples can be gases, solids or liquids. + + + Comment + + Label Exafs @@ -4657,14 +4377,6 @@ FatigueTesting Annotations - - Comment - Fatigue testing is a specialised form of mechanical testing that is performed by applying cyclic loading to a coupon or structure. These tests are used either to generate fatigue life and crack growth data, identify critical locations or demonstrate the safety of a structure that may be susceptible to fatigue. - - - Comment - - Preflabel FatigueTesting @@ -4673,6 +4385,14 @@ FatigueTesting Elucidation Fatigue testing is a specialised form of mechanical testing that is performed by applying cyclic loading to a coupon or structure. These tests are used either to generate fatigue life and crack growth data, identify critical locations or demonstrate the safety of a structure that may be susceptible to fatigue. + + Comment + Fatigue testing is a specialised form of mechanical testing that is performed by applying cyclic loading to a coupon or structure. These tests are used either to generate fatigue life and crack growth data, identify critical locations or demonstrate the safety of a structure that may be susceptible to fatigue. + + + Comment + + Label FatigueTesting @@ -4705,24 +4425,24 @@ FibDic Annotations - Comment - The FIB-DIC (Focused Ion Beam - Digital Image Correlation) ring-core technique is a powerful method for measuring residual stresses in materials. It is based on milling a ring-shaped sample, or core, from the material of interest using a focused ion beam (FIB). + Preflabel + FibDic - Comment - + Altlabel + FIBDICResidualStressAnalysis - Preflabel - FibDic + Elucidation + The FIB-DIC (Focused Ion Beam - Digital Image Correlation) ring-core technique is a powerful method for measuring residual stresses in materials. It is based on milling a ring-shaped sample, or core, from the material of interest using a focused ion beam (FIB). - Elucidation + Comment The FIB-DIC (Focused Ion Beam - Digital Image Correlation) ring-core technique is a powerful method for measuring residual stresses in materials. It is based on milling a ring-shaped sample, or core, from the material of interest using a focused ion beam (FIB). - Altlabel - FIBDICResidualStressAnalysis + Comment + Label @@ -4756,24 +4476,24 @@ FieldEmissionScanningElectronMicroscopy Annotations - Comment - Field emission scanning electron microscopy (FE-SEM) is an advanced technology used to capture the microstructure image of the materials. FE-SEM is typically performed in a high vacuum because gas molecules tend to disturb the electron beam and the emitted secondary and backscattered electrons used for imaging. + Preflabel + FieldEmissionScanningElectronMicroscopy - Comment - + Altlabel + FE-SEM - Preflabel - FieldEmissionScanningElectronMicroscopy + Elucidation + Field emission scanning electron microscopy (FE-SEM) is an advanced technology used to capture the microstructure image of the materials. FE-SEM is typically performed in a high vacuum because gas molecules tend to disturb the electron beam and the emitted secondary and backscattered electrons used for imaging. - Elucidation + Comment Field emission scanning electron microscopy (FE-SEM) is an advanced technology used to capture the microstructure image of the materials. FE-SEM is typically performed in a high vacuum because gas molecules tend to disturb the electron beam and the emitted secondary and backscattered electrons used for imaging. - Altlabel - FE-SEM + Comment + Label @@ -4806,34 +4526,34 @@ FourierTransformInfraredSpectroscopy Annotations - - Comment - A technique used to obtain an infrared spectrum of absorption or emission of a solid, liquid, or gas - - - Comment - - Preflabel FourierTransformInfraredSpectroscopy + + Altlabel + FTIR + Elucidation A technique used to obtain an infrared spectrum of absorption or emission of a solid, liquid, or gas - Altlabel - FTIR + Comment + A technique used to obtain an infrared spectrum of absorption or emission of a solid, liquid, or gas - Wikidatareference - https://www.wikidata.org/wiki/Q901559 + Comment + Wikipediareference https://en.wikipedia.org/wiki/Fourier-transform_infrared_spectroscopy + + Wikidatareference + https://www.wikidata.org/wiki/Q901559 + Label FourierTransformInfraredSpectroscopy @@ -4865,14 +4585,6 @@ Fractography Annotations - - Comment - Fractography is the study of fracture surfaces in order to determine the relation between the microstructure and the mechanism(s) of crack initiation and propagation and, eventually, the root cause of the fracture .Fractography qualitatively interprets the mechanisms of fracture that occur in a sample by microscopic examination of fracture surface morpholog. - - - Comment - - Preflabel Fractography @@ -4881,6 +4593,14 @@ Fractography Elucidation Fractography is the study of fracture surfaces in order to determine the relation between the microstructure and the mechanism(s) of crack initiation and propagation and, eventually, the root cause of the fracture .Fractography qualitatively interprets the mechanisms of fracture that occur in a sample by microscopic examination of fracture surface morpholog. + + Comment + Fractography is the study of fracture surfaces in order to determine the relation between the microstructure and the mechanism(s) of crack initiation and propagation and, eventually, the root cause of the fracture .Fractography qualitatively interprets the mechanisms of fracture that occur in a sample by microscopic examination of fracture surface morpholog. + + + Comment + + Label Fractography @@ -4912,14 +4632,6 @@ FreezingPointDepressionOsmometry Annotations - - Comment - The general principle of freezing point depression osmometry involves the relationship between the number of moles of dissolved solute in a solution and the change in freezing point. - - - Comment - - Preflabel FreezingPointDepressionOsmometry @@ -4928,6 +4640,14 @@ FreezingPointDepressionOsmometry Elucidation The general principle of freezing point depression osmometry involves the relationship between the number of moles of dissolved solute in a solution and the change in freezing point. + + Comment + The general principle of freezing point depression osmometry involves the relationship between the number of moles of dissolved solute in a solution and the change in freezing point. + + + Comment + + Label FreezingPointDepressionOsmometry @@ -4960,24 +4680,24 @@ GalvanostaticIntermittentTitrationTechnique Annotations - Comment - electrochemical method that applies current pulses to an electrochemical cell at rest and measures the voltage response + Preflabel + GalvanostaticIntermittentTitrationTechnique - Comment - + Altlabel + GITT - Preflabel - GalvanostaticIntermittentTitrationTechnique + Elucidation + electrochemical method that applies current pulses to an electrochemical cell at rest and measures the voltage response - Elucidation + Comment electrochemical method that applies current pulses to an electrochemical cell at rest and measures the voltage response - Altlabel - GITT + Comment + Wikidatareference @@ -5014,14 +4734,6 @@ GammaSpectrometry Annotations - - Comment - Gamma-ray spectroscopy is the qualitative study of the energy spectra of gamma-ray sources, such as in the nuclear industry, geochemical investigation, and astrophysics.[1] Gamma-ray spectrometry, on the other hand, is the method used to acquire a quantitative spectrum measurement.[2]

Most radioactive sources produce gamma rays, which are of various energies and intensities. When these emissions are detected and analyzed with a spectroscopy system, a gamma-ray energy spectrum can be produced.

A detailed analysis of this spectrum is typically used to determine the identity and quantity of gamma emitters present in a gamma source, and is a vital tool in radiometric assay. The gamma spectrum is characteristic of the gamma-emitting nuclides contained in the source, just like in an optical spectrometer, the optical spectrum is characteristic of the material contained in a sample. - - - Comment - - Preflabel GammaSpectrometry @@ -5030,6 +4742,14 @@ GammaSpectrometry Elucidation Gamma-ray spectroscopy is the qualitative study of the energy spectra of gamma-ray sources, such as in the nuclear industry, geochemical investigation, and astrophysics.[1] Gamma-ray spectrometry, on the other hand, is the method used to acquire a quantitative spectrum measurement.[2]

Most radioactive sources produce gamma rays, which are of various energies and intensities. When these emissions are detected and analyzed with a spectroscopy system, a gamma-ray energy spectrum can be produced.

A detailed analysis of this spectrum is typically used to determine the identity and quantity of gamma emitters present in a gamma source, and is a vital tool in radiometric assay. The gamma spectrum is characteristic of the gamma-emitting nuclides contained in the source, just like in an optical spectrometer, the optical spectrum is characteristic of the material contained in a sample. + + Comment + Gamma-ray spectroscopy is the qualitative study of the energy spectra of gamma-ray sources, such as in the nuclear industry, geochemical investigation, and astrophysics.[1] Gamma-ray spectrometry, on the other hand, is the method used to acquire a quantitative spectrum measurement.[2]

Most radioactive sources produce gamma rays, which are of various energies and intensities. When these emissions are detected and analyzed with a spectroscopy system, a gamma-ray energy spectrum can be produced.

A detailed analysis of this spectrum is typically used to determine the identity and quantity of gamma emitters present in a gamma source, and is a vital tool in radiometric assay. The gamma spectrum is characteristic of the gamma-emitting nuclides contained in the source, just like in an optical spectrometer, the optical spectrum is characteristic of the material contained in a sample. + + + Comment + + Label GammaSpectrometry @@ -5062,15 +4782,11 @@ GasAdsorptionPorosimetry Annotations - Comment - Gas Adsorption Porosimetry is a method used for analyzing the surface area and porosity of materials. In this method, a gas, typically nitrogen or argon, is adsorbed onto the surface of the material at various pressures and temperatures. - - - Comment - + Preflabel + GasAdsorptionPorosimetry - Preflabel + Altlabel GasAdsorptionPorosimetry @@ -5078,8 +4794,12 @@ GasAdsorptionPorosimetry Gas Adsorption Porosimetry is a method used for analyzing the surface area and porosity of materials. In this method, a gas, typically nitrogen or argon, is adsorbed onto the surface of the material at various pressures and temperatures. - Altlabel - GasAdsorptionPorosimetry + Comment + Gas Adsorption Porosimetry is a method used for analyzing the surface area and porosity of materials. In this method, a gas, typically nitrogen or argon, is adsorbed onto the surface of the material at various pressures and temperatures. + + + Comment + Label @@ -5113,28 +4833,28 @@ HPPC Annotations - Comment - electrochemical method that measures the voltage drop of a cell resulting from a square wave current load + Preflabel + HPPC - Comment - + Altlabel + HybridPulsePowerCharacterisation - Preflabel - HPPC + Altlabel + HybridPulsePowerCharacterization Elucidation electrochemical method that measures the voltage drop of a cell resulting from a square wave current load - Altlabel - HybridPulsePowerCharacterisation + Comment + electrochemical method that measures the voltage drop of a cell resulting from a square wave current load - Altlabel - HybridPulsePowerCharacterization + Comment + Label @@ -5167,14 +4887,6 @@ HardnessTesting Annotations - - Comment - A test to determine the resistance a material exhibits to permanent deformation by penetration of another harder material. - - - Comment - - Preflabel HardnessTesting @@ -5183,6 +4895,14 @@ HardnessTesting Elucidation A test to determine the resistance a material exhibits to permanent deformation by penetration of another harder material. + + Comment + A test to determine the resistance a material exhibits to permanent deformation by penetration of another harder material. + + + Comment + + Label HardnessTesting @@ -5214,14 +4934,14 @@ HardwareManufacturer Annotations - - Comment - - Preflabel HardwareManufacturer + + Comment + + Label HardwareManufacturer @@ -5253,14 +4973,14 @@ HardwareModel Annotations - - Comment - - Preflabel HardwareModel + + Comment + + Label HardwareModel @@ -5292,14 +5012,6 @@ Hazard Annotations - - Comment - Set of inherent properties of a substance, mixture of substances, or a process involving substances that, under production, usage, or disposal conditions, make it capable of causing adverse effects to organisms or the environment, depending on the degree of exposure; in other words, it is a source of danger. - - - Comment - - Preflabel Hazard @@ -5308,6 +5020,14 @@ Hazard Elucidation Set of inherent properties of a substance, mixture of substances, or a process involving substances that, under production, usage, or disposal conditions, make it capable of causing adverse effects to organisms or the environment, depending on the degree of exposure; in other words, it is a source of danger. + + Comment + Set of inherent properties of a substance, mixture of substances, or a process involving substances that, under production, usage, or disposal conditions, make it capable of causing adverse effects to organisms or the environment, depending on the degree of exposure; in other words, it is a source of danger. + + + Comment + + Label Hazard @@ -5339,14 +5059,6 @@ Holder Annotations - - Comment - An object which supports the specimen in the correct position for the characterisation process. - - - Comment - - Preflabel Holder @@ -5355,6 +5067,14 @@ Holder Elucidation An object which supports the specimen in the correct position for the characterisation process. + + Comment + An object which supports the specimen in the correct position for the characterisation process. + + + Comment + + Label Holder @@ -5386,6 +5106,14 @@ HydrodynamicVoltammetry Annotations + + Preflabel + HydrodynamicVoltammetry + + + Elucidation + voltammetry with forced flow of the solution towards the electrode surface + Comment A linear potential scan, at sufficiently slow scan rates so as to ensure a steady state response, is usually applied. @@ -5407,24 +5135,16 @@ HydrodynamicVoltammetry - Preflabel - HydrodynamicVoltammetry - - - Elucidation - voltammetry with forced flow of the solution towards the electrode surface - - - Iupacreference - https://doi.org/10.1515/pac-2018-0109 + Wikipediareference + https://en.wikipedia.org/wiki/Hydrodynamic_voltammetry Wikidatareference https://www.wikidata.org/wiki/Q17028237 - Wikipediareference - https://en.wikipedia.org/wiki/Hydrodynamic_voltammetry + Iupacreference + https://doi.org/10.1515/pac-2018-0109 Label @@ -5458,24 +5178,24 @@ ICI Annotations - Comment - electrochemical method that measures the voltage response of an electrochemical cell under galvanostatic conditions to short interruptions in the current + Preflabel + ICI - Comment - + Altlabel + IntermittentCurrentInterruptionMethod - Preflabel - ICI + Elucidation + electrochemical method that measures the voltage response of an electrochemical cell under galvanostatic conditions to short interruptions in the current - Elucidation + Comment electrochemical method that measures the voltage response of an electrochemical cell under galvanostatic conditions to short interruptions in the current - Altlabel - IntermittentCurrentInterruptionMethod + Comment + Label @@ -5508,14 +5228,6 @@ Impedimetry Annotations - - Comment - measurement principle in which the complex electric impedance of a system is measured, usually as a function of a small amplitude sinusoidal electrode potential - - - Comment - - Preflabel Impedimetry @@ -5524,6 +5236,14 @@ Impedimetry Elucidation measurement principle in which the complex electric impedance of a system is measured, usually as a function of a small amplitude sinusoidal electrode potential + + Comment + measurement principle in which the complex electric impedance of a system is measured, usually as a function of a small amplitude sinusoidal electrode potential + + + Comment + + Iupacreference https://doi.org/10.1515/pac-2018-0109 @@ -5559,6 +5279,14 @@ InteractionVolume Annotations + + Preflabel + InteractionVolume + + + Elucidation + The volume of material, and the surrounding environment, that interacts with the probe and generate a detectable (measurable) signal (information). + Comment In some cases, (like tribological characterisations) the “sample” can also be the “probe”. When analysing a system of samples that interact each other, finding a clear definition can become a complex problem. @@ -5579,14 +5307,6 @@ InteractionVolume Comment - - Preflabel - InteractionVolume - - - Elucidation - The volume of material, and the surrounding environment, that interacts with the probe and generate a detectable (measurable) signal (information). - Example In Scanning Electron Microscopy (SEM), the interaction volume is the volume of material that interacts directly with the incident electron beam, is usually much smaller than the entire specimen’s volume, and can be computed by using proper models. The interaction between the scanning probe and the sample generates a series of detectable signals (back scattered electrons, secondary electrons, x-rays, specimen current, etc.) which contain information on sample morphology, microstructure, composition, etc. @@ -5626,14 +5346,14 @@ IntermediateSample Annotations - - Comment - - Preflabel IntermediateSample + + Comment + + Label IntermediateSample @@ -5665,14 +5385,6 @@ IonChromatography Annotations - - Comment - Ion chromatography (or ion-exchange chromatography) is a form of chromatography that separates ions and ionizable polar molecules based on their affinity to the ion exchanger. - - - Comment - - Preflabel IonChromatography @@ -5681,6 +5393,14 @@ IonChromatography Elucidation Ion chromatography (or ion-exchange chromatography) is a form of chromatography that separates ions and ionizable polar molecules based on their affinity to the ion exchanger. + + Comment + Ion chromatography (or ion-exchange chromatography) is a form of chromatography that separates ions and ionizable polar molecules based on their affinity to the ion exchanger. + + + Comment + + Wikipediareference https://en.wikipedia.org/wiki/Ion_chromatography @@ -5717,24 +5437,24 @@ IonMobilitySpectrometry Annotations - Comment - Ion mobility spectrometry (IMS) It is a method of conducting analytical research that separates and identifies ionized molecules present in the gas phase based on the mobility of the molecules in a carrier buffer gas. Even though it is used extensively for military or security objectives, such as detecting drugs and explosives, the technology also has many applications in laboratory analysis, including studying small and big biomolecules. IMS instruments are extremely sensitive stand-alone devices, but are often coupled with mass spectrometry, gas chromatography or high-performance liquid chromatography in order to achieve a multi-dimensional separation. They come in various sizes, ranging from a few millimeters to several meters depending on the specific application, and are capable of operating under a broad range of conditions. IMS instruments such as microscale high-field asymmetric-waveform ion mobility spectrometry can be palm-portable for use in a range of applications including volatile organic compound (VOC) monitoring, biological sample analysis, medical diagnosis and food quality monitoring. + Preflabel + IonMobilitySpectrometry - Comment - + Altlabel + IMS - Preflabel - IonMobilitySpectrometry + Elucidation + Ion mobility spectrometry (IMS) It is a method of conducting analytical research that separates and identifies ionized molecules present in the gas phase based on the mobility of the molecules in a carrier buffer gas. Even though it is used extensively for military or security objectives, such as detecting drugs and explosives, the technology also has many applications in laboratory analysis, including studying small and big biomolecules. IMS instruments are extremely sensitive stand-alone devices, but are often coupled with mass spectrometry, gas chromatography or high-performance liquid chromatography in order to achieve a multi-dimensional separation. They come in various sizes, ranging from a few millimeters to several meters depending on the specific application, and are capable of operating under a broad range of conditions. IMS instruments such as microscale high-field asymmetric-waveform ion mobility spectrometry can be palm-portable for use in a range of applications including volatile organic compound (VOC) monitoring, biological sample analysis, medical diagnosis and food quality monitoring. - Elucidation + Comment Ion mobility spectrometry (IMS) It is a method of conducting analytical research that separates and identifies ionized molecules present in the gas phase based on the mobility of the molecules in a carrier buffer gas. Even though it is used extensively for military or security objectives, such as detecting drugs and explosives, the technology also has many applications in laboratory analysis, including studying small and big biomolecules. IMS instruments are extremely sensitive stand-alone devices, but are often coupled with mass spectrometry, gas chromatography or high-performance liquid chromatography in order to achieve a multi-dimensional separation. They come in various sizes, ranging from a few millimeters to several meters depending on the specific application, and are capable of operating under a broad range of conditions. IMS instruments such as microscale high-field asymmetric-waveform ion mobility spectrometry can be palm-portable for use in a range of applications including volatile organic compound (VOC) monitoring, biological sample analysis, medical diagnosis and food quality monitoring. - Altlabel - IMS + Comment + Label @@ -5768,24 +5488,24 @@ IsothermalMicrocalorimetry Annotations - Comment - Isothermal microcalorimetry (IMC) is a laboratory method for real-time monitoring and dynamic analysis of chemical, physical and biological processes. Over a period of hours or days, IMC determines the onset, rate, extent and energetics of such processes for specimens in small ampoules (e.g. 3–20 ml) at a constant set temperature (c. 15 °C–150 °C).

IMC accomplishes this dynamic analysis by measuring and recording vs. elapsed time the net rate of heat flow (μJ/s = μW) to or from the specimen ampoule, and the cumulative amount of heat (J) consumed or produced. + Preflabel + IsothermalMicrocalorimetry - Comment - + Altlabel + IMC - Preflabel - IsothermalMicrocalorimetry + Elucidation + Isothermal microcalorimetry (IMC) is a laboratory method for real-time monitoring and dynamic analysis of chemical, physical and biological processes. Over a period of hours or days, IMC determines the onset, rate, extent and energetics of such processes for specimens in small ampoules (e.g. 3–20 ml) at a constant set temperature (c. 15 °C–150 °C).

IMC accomplishes this dynamic analysis by measuring and recording vs. elapsed time the net rate of heat flow (μJ/s = μW) to or from the specimen ampoule, and the cumulative amount of heat (J) consumed or produced. - Elucidation + Comment Isothermal microcalorimetry (IMC) is a laboratory method for real-time monitoring and dynamic analysis of chemical, physical and biological processes. Over a period of hours or days, IMC determines the onset, rate, extent and energetics of such processes for specimens in small ampoules (e.g. 3–20 ml) at a constant set temperature (c. 15 °C–150 °C).

IMC accomplishes this dynamic analysis by measuring and recording vs. elapsed time the net rate of heat flow (μJ/s = μW) to or from the specimen ampoule, and the cumulative amount of heat (J) consumed or produced. - Altlabel - IMC + Comment + Label @@ -5818,10 +5538,6 @@ Laboratory Annotations - - Comment - The laboratory where the whole characterisation process or some of its stages take place. - Preflabel Laboratory @@ -5830,6 +5546,10 @@ Laboratory Elucidation The laboratory where the whole characterisation process or some of its stages take place. + + Comment + The laboratory where the whole characterisation process or some of its stages take place. + Label Laboratory @@ -5861,14 +5581,6 @@ LevelOfAutomation Annotations - - Comment - Describes the level of automation of the test. - - - Comment - - Preflabel LevelOfAutomation @@ -5877,6 +5589,14 @@ LevelOfAutomation Elucidation Describes the level of automation of the test. + + Comment + Describes the level of automation of the test. + + + Comment + + Label LevelOfAutomation @@ -5908,14 +5628,6 @@ LevelOfExpertise Annotations - - Comment - Describes the level of expertise required to carry out a process (the entire test or the data processing). - - - Comment - - Preflabel LevelOfExpertise @@ -5924,6 +5636,14 @@ LevelOfExpertise Elucidation Describes the level of expertise required to carry out a process (the entire test or the data processing). + + Comment + Describes the level of expertise required to carry out a process (the entire test or the data processing). + + + Comment + + Label LevelOfExpertise @@ -5955,14 +5675,6 @@ LightScattering Annotations - - Comment - Light scattering is the way light behaves when it interacts with a medium that contains particles or the boundary between different mediums where defects or structures are present. It is different than the effects of refraction, where light undergoes a change in index of refraction as it passes from one medium to another, or reflection, where light reflects back into the same medium, both of which are governed by Snell’s law. Light scattering can be caused by factors such as the nature, texture, or specific structures of a surface and the presence of gas, liquid, or solid particles through which light propagates, as well as the nature of the light itself, of its wavelengths and polarization states. It usually results in diffuse light and can also affect the dispersion of color. - - - Comment - - Preflabel LightScattering @@ -5971,6 +5683,14 @@ LightScattering Elucidation Light scattering is the way light behaves when it interacts with a medium that contains particles or the boundary between different mediums where defects or structures are present. It is different than the effects of refraction, where light undergoes a change in index of refraction as it passes from one medium to another, or reflection, where light reflects back into the same medium, both of which are governed by Snell’s law. Light scattering can be caused by factors such as the nature, texture, or specific structures of a surface and the presence of gas, liquid, or solid particles through which light propagates, as well as the nature of the light itself, of its wavelengths and polarization states. It usually results in diffuse light and can also affect the dispersion of color. + + Comment + Light scattering is the way light behaves when it interacts with a medium that contains particles or the boundary between different mediums where defects or structures are present. It is different than the effects of refraction, where light undergoes a change in index of refraction as it passes from one medium to another, or reflection, where light reflects back into the same medium, both of which are governed by Snell’s law. Light scattering can be caused by factors such as the nature, texture, or specific structures of a surface and the presence of gas, liquid, or solid particles through which light propagates, as well as the nature of the light itself, of its wavelengths and polarization states. It usually results in diffuse light and can also affect the dispersion of color. + + + Comment + + Label LightScattering @@ -6002,14 +5722,6 @@ LinearChronopotentiometry Annotations - - Comment - chronopotentiometry where the applied current is changed linearly - - - Comment - - Preflabel LinearChronopotentiometry @@ -6018,6 +5730,14 @@ LinearChronopotentiometry Elucidation chronopotentiometry where the applied current is changed linearly + + Comment + chronopotentiometry where the applied current is changed linearly + + + Comment + + Label LinearChronopotentiometry @@ -6050,56 +5770,56 @@ LinearScanVoltammetry Annotations - Comment - LSV corresponds to the first half cycle of cyclic voltammetry. + Preflabel + LinearScanVoltammetry - Comment - The peak current is expressed by the Randles-Ševčík equation. + Altlabel + LSV - Comment - The scan is usually started at a potential where no electrode reaction occurs. + Altlabel + LinearPolarization - Comment - Voltammetry in which the current is recorded as the electrode potential is varied linearly with time. + Altlabel + LinearSweepVoltammetry - Comment - + Elucidation + Voltammetry in which the current is recorded as the electrode potential is varied linearly with time. - Preflabel - LinearScanVoltammetry + Comment + LSV corresponds to the first half cycle of cyclic voltammetry. - Elucidation - Voltammetry in which the current is recorded as the electrode potential is varied linearly with time. + Comment + The peak current is expressed by the Randles-Ševčík equation. - Altlabel - LSV + Comment + The scan is usually started at a potential where no electrode reaction occurs. - Altlabel - LinearPolarization + Comment + Voltammetry in which the current is recorded as the electrode potential is varied linearly with time. - Altlabel - LinearSweepVoltammetry + Comment + - Iupacreference - https://doi.org/10.1515/pac-2018-0109 + Wikipediareference + https://en.wikipedia.org/wiki/Linear_sweep_voltammetry Wikidatareference https://www.wikidata.org/wiki/Q620700 - Wikipediareference - https://en.wikipedia.org/wiki/Linear_sweep_voltammetry + Iupacreference + https://doi.org/10.1515/pac-2018-0109 Label @@ -6132,14 +5852,6 @@ MassSpectrometry Annotations - - Comment - Mass spectrometry is a powerful analytical technique used to quantify known materials, to identify unknown compounds within a sample, and to elucidate the structure and chemical properties of different molecules. - - - Comment - - Preflabel MassSpectrometry @@ -6148,6 +5860,14 @@ MassSpectrometry Elucidation Mass spectrometry is a powerful analytical technique used to quantify known materials, to identify unknown compounds within a sample, and to elucidate the structure and chemical properties of different molecules. + + Comment + Mass spectrometry is a powerful analytical technique used to quantify known materials, to identify unknown compounds within a sample, and to elucidate the structure and chemical properties of different molecules. + + + Comment + + Label MassSpectrometry @@ -6179,14 +5899,6 @@ MeasurementDataPostProcessing Annotations - - Comment - Application of a post-processing model to signals through a software, in order to calculate the final characterisation property. - - - Comment - - Preflabel MeasurementDataPostProcessing @@ -6195,6 +5907,14 @@ MeasurementDataPostProcessing Elucidation Application of a post-processing model to signals through a software, in order to calculate the final characterisation property. + + Comment + Application of a post-processing model to signals through a software, in order to calculate the final characterisation property. + + + Comment + + Example Analysis of SEM (or optical) images to gain additional information (image filtering/integration/averaging, microstructural analysis, grain size evaluation, Digital Image Correlation procedures, etc.) @@ -6234,14 +5954,6 @@ MeasurementParameter Annotations - - Comment - Describes the main input parameters that are needed to acquire the signal - - - Comment - - Preflabel MeasurementParameter @@ -6250,6 +5962,14 @@ MeasurementParameter Elucidation Describes the main input parameters that are needed to acquire the signal + + Comment + Describes the main input parameters that are needed to acquire the signal + + + Comment + + Label MeasurementParameter @@ -6281,6 +6001,14 @@ MeasurementSystemAdjustment Annotations + + Preflabel + MeasurementSystemAdjustment + + + Elucidation + Activity which has the goal of adjusting/tuning a measing instrument, without performing a measurement on a reference sample (which is a calibration).
The output of this process can be a specific measurement parameter to be used in the characteriasation measurement process. + Comment Activity which has the goal of adjusting/tuning a measing instrument, without performing a measurement on a reference sample (which is a calibration).
The output of this process can be a specific measurement parameter to be used in the characteriasation measurement process. @@ -6294,21 +6022,13 @@ MeasurementSystemAdjustment - Preflabel - MeasurementSystemAdjustment - - - Elucidation - Activity which has the goal of adjusting/tuning a measing instrument, without performing a measurement on a reference sample (which is a calibration).
The output of this process can be a specific measurement parameter to be used in the characteriasation measurement process. + Definition + Set of operations carried out on a measuring system so that it provides prescribed indications corresponding to given values of a quantity being measured
NOTE 1 If there is any doubt that the context in which the term is being used is that of metrology, the long form
“adjustment of a measuring system” might be used.
NOTE 2 Types of adjustment of a measuring system include zero adjustment, offset adjustment, and span adjustment
(sometimes called “gain adjustment”).
NOTE 3 Adjustment of a measuring system should not be confused with calibration, which is sometimes a prerequisite
for adjustment.
NOTE 4 After an adjustment of a measuring system, the measuring system must usually be recalibrated.

-- International Vocabulary of Metrology(VIM) Vimterm Adjustment - - Definition - Set of operations carried out on a measuring system so that it provides prescribed indications corresponding to given values of a quantity being measured
NOTE 1 If there is any doubt that the context in which the term is being used is that of metrology, the long form
“adjustment of a measuring system” might be used.
NOTE 2 Types of adjustment of a measuring system include zero adjustment, offset adjustment, and span adjustment
(sometimes called “gain adjustment”).
NOTE 3 Adjustment of a measuring system should not be confused with calibration, which is sometimes a prerequisite
for adjustment.
NOTE 4 After an adjustment of a measuring system, the measuring system must usually be recalibrated.

-- International Vocabulary of Metrology(VIM) - Label MeasurementSystemAdjustment @@ -6340,14 +6060,6 @@ MeasurementTime Annotations - - Comment - The overall time needed to acquire the measurement data - - - Comment - - Preflabel MeasurementTime @@ -6356,6 +6068,14 @@ MeasurementTime Elucidation The overall time needed to acquire the measurement data + + Comment + The overall time needed to acquire the measurement data + + + Comment + + Label MeasurementTime @@ -6387,14 +6107,6 @@ MechanicalTesting Annotations - - Comment - Mechanical testing covers a wide range of tests, which can be divided broadly into two types:
1. those that aim to determine a material's mechanical properties, independent of geometry.
2. those that determine the response of a structure to a given action, e.g. testing of composite beams, aircraft structures to destruction, etc. - - - Comment - - Preflabel MechanicalTesting @@ -6403,6 +6115,14 @@ MechanicalTesting Elucidation Mechanical testing covers a wide range of tests, which can be divided broadly into two types:
1. those that aim to determine a material's mechanical properties, independent of geometry.
2. those that determine the response of a structure to a given action, e.g. testing of composite beams, aircraft structures to destruction, etc. + + Comment + Mechanical testing covers a wide range of tests, which can be divided broadly into two types:
1. those that aim to determine a material's mechanical properties, independent of geometry.
2. those that determine the response of a structure to a given action, e.g. testing of composite beams, aircraft structures to destruction, etc. + + + Comment + + Wikipediareference https://en.wikipedia.org/wiki/Mechanical_testing @@ -6438,14 +6158,6 @@ MembraneOsmometry Annotations - - Comment - In the membrane osmometry technique, a pure solvent and polymer solution are separated by a semipermeable membrane, due to the higher chemical potential of the solvent in the pure solvent than in polymer solution, the solvent starts moving towards the polymer solution. - - - Comment - - Preflabel MembraneOsmometry @@ -6454,6 +6166,14 @@ MembraneOsmometry Elucidation In the membrane osmometry technique, a pure solvent and polymer solution are separated by a semipermeable membrane, due to the higher chemical potential of the solvent in the pure solvent than in polymer solution, the solvent starts moving towards the polymer solution. + + Comment + In the membrane osmometry technique, a pure solvent and polymer solution are separated by a semipermeable membrane, due to the higher chemical potential of the solvent in the pure solvent than in polymer solution, the solvent starts moving towards the polymer solution. + + + Comment + + Label MembraneOsmometry @@ -6485,14 +6205,6 @@ MercuryPorosimetry Annotations - - Comment - a method used to measure the pore size distribution and total pore volume of solid materials by infiltrating mercury into the pores under controlled pressure conditions and analyzing the amount of mercury intrusion - - - Comment - - Preflabel MercuryPorosimetry @@ -6501,6 +6213,14 @@ MercuryPorosimetry Elucidation a method used to measure the pore size distribution and total pore volume of solid materials by infiltrating mercury into the pores under controlled pressure conditions and analyzing the amount of mercury intrusion + + Comment + a method used to measure the pore size distribution and total pore volume of solid materials by infiltrating mercury into the pores under controlled pressure conditions and analyzing the amount of mercury intrusion + + + Comment + + Label MercuryPorosimetry @@ -6532,14 +6252,6 @@ Microscopy Annotations - - Comment - Microscopy is a category of characterization techniques which probe and map the surface and sub-surface structure of a material. These techniques can use photons, electrons, ions or physical cantilever probes to gather data about a sample's structure on a range of length scales. - - - Comment - - Preflabel Microscopy @@ -6548,6 +6260,14 @@ Microscopy Elucidation Microscopy is a category of characterization techniques which probe and map the surface and sub-surface structure of a material. These techniques can use photons, electrons, ions or physical cantilever probes to gather data about a sample's structure on a range of length scales. + + Comment + Microscopy is a category of characterization techniques which probe and map the surface and sub-surface structure of a material. These techniques can use photons, electrons, ions or physical cantilever probes to gather data about a sample's structure on a range of length scales. + + + Comment + + Label Microscopy @@ -6579,14 +6299,6 @@ Nanoindentation Annotations - - Comment - Nanoindentation (known also as nanoindentation test) is a method for testing the hardness and related mechanical properties of materials, facilitated by high-precision instrumentation in the nanometer scale, as well as analytical and computational algorithms for result evaluation. - - - Comment - - Preflabel Nanoindentation @@ -6595,6 +6307,14 @@ Nanoindentation Elucidation Nanoindentation (known also as nanoindentation test) is a method for testing the hardness and related mechanical properties of materials, facilitated by high-precision instrumentation in the nanometer scale, as well as analytical and computational algorithms for result evaluation. + + Comment + Nanoindentation (known also as nanoindentation test) is a method for testing the hardness and related mechanical properties of materials, facilitated by high-precision instrumentation in the nanometer scale, as well as analytical and computational algorithms for result evaluation. + + + Comment + + Example By definition, when someone performs nanoindentation, it refers to either quasistatic or continuous stiffness measurement. However, in reality with a nanoindenter it is also possible to perform scratch testing, scanning probe microscopy, and apply non-contact surface energy mapping, which can also be called nanoindentation, because they are measurements conducted using an nanoindenter. @@ -6631,24 +6351,24 @@ NeutronSpinEchoSpectroscopy Annotations - Comment - Neutron spin echo spectroscopy is a high resolution inelastic neutron scattering method probing nanosecond dynamics. Neutron spin echo (NSE) spectroscopy uses the precession of neutron spins in a magnetic field to measure the energy transfer at the sample and decouples the energy resolution from beam characteristics like monochromatisation and collimation. + Preflabel + NeutronSpinEchoSpectroscopy - Comment - + Altlabel + NSE - Preflabel - NeutronSpinEchoSpectroscopy + Elucidation + Neutron spin echo spectroscopy is a high resolution inelastic neutron scattering method probing nanosecond dynamics. Neutron spin echo (NSE) spectroscopy uses the precession of neutron spins in a magnetic field to measure the energy transfer at the sample and decouples the energy resolution from beam characteristics like monochromatisation and collimation. - Elucidation + Comment Neutron spin echo spectroscopy is a high resolution inelastic neutron scattering method probing nanosecond dynamics. Neutron spin echo (NSE) spectroscopy uses the precession of neutron spins in a magnetic field to measure the energy transfer at the sample and decouples the energy resolution from beam characteristics like monochromatisation and collimation. - Altlabel - NSE + Comment + Label @@ -6681,14 +6401,6 @@ Nexafs Annotations - - Comment - Near edge X-ray absorption fine structure (NEXAFS), also known as X-ray absorption near edge structure (XANES), is a type of absorption spectroscopy that indicates the features in the X-ray absorption spectra (XAS) of condensed matter due to the photoabsorption cross section for electronic transitions from an atomic core level to final states in the energy region of 50–100 eV above the selected atomic core level ionization energy, where the wavelength of the photoelectron is larger than the interatomic distance between the absorbing atom and its first neighbour atoms. - - - Comment - - Preflabel Nexafs @@ -6697,6 +6409,14 @@ Nexafs Elucidation Near edge X-ray absorption fine structure (NEXAFS), also known as X-ray absorption near edge structure (XANES), is a type of absorption spectroscopy that indicates the features in the X-ray absorption spectra (XAS) of condensed matter due to the photoabsorption cross section for electronic transitions from an atomic core level to final states in the energy region of 50–100 eV above the selected atomic core level ionization energy, where the wavelength of the photoelectron is larger than the interatomic distance between the absorbing atom and its first neighbour atoms. + + Comment + Near edge X-ray absorption fine structure (NEXAFS), also known as X-ray absorption near edge structure (XANES), is a type of absorption spectroscopy that indicates the features in the X-ray absorption spectra (XAS) of condensed matter due to the photoabsorption cross section for electronic transitions from an atomic core level to final states in the energy region of 50–100 eV above the selected atomic core level ionization energy, where the wavelength of the photoelectron is larger than the interatomic distance between the absorbing atom and its first neighbour atoms. + + + Comment + + Label Nexafs @@ -6722,11 +6442,23 @@ NormalPulseVoltammetry - - + + + + + + + + + + + + + - + + @@ -6756,18 +6488,6 @@ NormalPulseVoltammetry - - - - - - - - - - - - @@ -6804,28 +6524,28 @@ NuclearMagneticResonance - - + + - - + + - - + + - - + + - - + + @@ -6859,24 +6579,24 @@ OpenCircuitHold - - + + - - + + - - + + - + - - + + @@ -6909,14 +6629,6 @@ Operator - - - - - - - - @@ -6925,6 +6637,14 @@ Operator + + + + + + + + @@ -6964,14 +6684,6 @@ OpticalMicroscopy - - - - - - - - @@ -6980,6 +6692,14 @@ OpticalMicroscopy + + + + + + + + @@ -7011,14 +6731,14 @@ OpticalTesting - - - - + + + + @@ -7050,14 +6770,6 @@ Osmometry - - - - - - - - @@ -7066,6 +6778,14 @@ Osmometry + + + + + + + + @@ -7097,14 +6817,6 @@ PhotoluminescenceMicroscopy - - - - - - - - @@ -7113,6 +6825,14 @@ PhotoluminescenceMicroscopy + + + + + + + + @@ -7144,14 +6864,6 @@ PhysicsOfInteraction - - - - - - - - @@ -7160,6 +6872,14 @@ PhysicsOfInteraction + + + + + + + + @@ -7199,14 +6919,14 @@ Porosimetry - - - - + + + + @@ -7239,11 +6959,11 @@ PostProcessingModel - - + + - + @@ -7252,15 +6972,15 @@ PostProcessingModel - + - - + + - - + + @@ -7293,6 +7013,18 @@ PotentiometricStrippingAnalysis + + + + + + + + + + + + @@ -7317,18 +7049,6 @@ PotentiometricStrippingAnalysis - - - - - - - - - - - - @@ -7360,6 +7080,14 @@ Potentiometry + + + + + + + + @@ -7377,21 +7105,13 @@ Potentiometry - - - - - - + + - - - - @@ -7427,14 +7147,6 @@ PreparedSample - - - - - - - - @@ -7443,6 +7155,14 @@ PreparedSample + + + + + + + + @@ -7474,14 +7194,6 @@ PrimaryData - - - - - - - - @@ -7490,6 +7202,14 @@ PrimaryData + + + + + + + + @@ -7533,14 +7253,6 @@ Probe - - - - - - - - @@ -7549,6 +7261,14 @@ Probe + + + + + + + + @@ -7600,14 +7320,6 @@ ProbeSampleInteraction - - - - - - - - @@ -7616,6 +7328,14 @@ ProbeSampleInteraction + + + + + + + + @@ -7655,14 +7375,6 @@ ProcessingReproducibility - - - - - - - - @@ -7671,6 +7383,14 @@ ProcessingReproducibility + + + + + + + + @@ -7702,14 +7422,6 @@ Profilometry - - - - - - - - @@ -7718,6 +7430,14 @@ Profilometry + + + + + + + + @@ -7750,24 +7470,24 @@ PseudoOpenCircuitVoltageMethod - - + + - - + + - - + + - + - - + + @@ -7800,14 +7520,6 @@ PulsedElectroacousticMethod - - - - - - - - @@ -7816,6 +7528,14 @@ PulsedElectroacousticMethod + + + + + + + + @@ -7851,14 +7571,6 @@ RamanSpectroscopy - - - - - - - - @@ -7867,6 +7579,14 @@ RamanSpectroscopy + + + + + + + + @@ -7898,10 +7618,6 @@ Rationale - - - - @@ -7910,6 +7626,10 @@ Rationale + + + + @@ -7942,32 +7662,32 @@ RawData - - + + - + - - + + - + - - + + - - + + - - + + @@ -8012,14 +7732,14 @@ RawSample - - - - + + + + @@ -8052,40 +7772,36 @@ ReferenceSample - - + + - - + + - - + + - - + + - - - - - - + + - - + + - - + + @@ -8095,6 +7811,10 @@ ReferenceSample + + + + @@ -8127,32 +7847,32 @@ Sample - - + + - - + + - - + + - - + + - - + + - - + + @@ -8185,14 +7905,6 @@ SampleInspection - - - - - - - - @@ -8201,6 +7913,14 @@ SampleInspection + + + + + + + + @@ -8236,14 +7956,14 @@ SampleInspectionInstrument - - - - + + + + @@ -8275,14 +7995,6 @@ SampleInspectionParameter - - - - - - - - @@ -8291,6 +8003,14 @@ SampleInspectionParameter + + + + + + + + @@ -8319,16 +8039,8 @@ SamplePreparation - - - - - - - - - - + + @@ -8338,6 +8050,14 @@ SamplePreparation + + + + + + + + @@ -8381,14 +8101,14 @@ SamplePreparationInstrument - - - - + + + + @@ -8420,14 +8140,6 @@ SamplePreparationParameter - - - - - - - - @@ -8436,6 +8148,14 @@ SamplePreparationParameter + + + + + + + + @@ -8468,28 +8188,28 @@ SampledDCPolarography - - + + - - + + - - + + - - + + - - + + - - + + @@ -8527,11 +8247,11 @@ SamplingProcess - - + + - + @@ -8540,15 +8260,15 @@ SamplingProcess - + - - + + - - + + @@ -8582,24 +8302,24 @@ ScanningAugerElectronMicroscopy - - + + - - + + - - + + - + - - + + @@ -8633,24 +8353,24 @@ ScanningElectronMicroscopy - - + + - - + + - - + + - + - - + + @@ -8684,24 +8404,24 @@ ScanningKelvinProbe - - + + - - + + - - + + - + - - + + @@ -8734,14 +8454,6 @@ ScanningProbeMicroscopy - - - - - - - - @@ -8750,6 +8462,14 @@ ScanningProbeMicroscopy + + + + + + + + @@ -8782,24 +8502,24 @@ ScanningTunnelingMicroscopy - - + + - - + + - - + + - + - - + + @@ -8832,14 +8552,14 @@ ScatteringAndDiffraction - - - - + + + + @@ -8872,24 +8592,24 @@ SecondaryData - - + + - - + + - - + + - + - - + + @@ -8931,24 +8651,24 @@ SecondaryIonMassSpectrometry - - + + - - + + - - + + - + - - + + @@ -8981,14 +8701,14 @@ ShearOrTorsionTesting - - - - + + + + @@ -9020,6 +8740,14 @@ Signal + + + + + + + + @@ -9040,14 +8768,6 @@ Signal - - - - - - - - @@ -9083,14 +8803,6 @@ Spectrometry - - - - - - - - @@ -9099,6 +8811,14 @@ Spectrometry + + + + + + + + @@ -9127,16 +8847,8 @@ Spectroscopy - - - - - - - - - - + + @@ -9146,6 +8858,14 @@ Spectroscopy + + + + + + + + @@ -9178,56 +8898,56 @@ SquareWaveVoltammetry - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + @@ -9260,14 +8980,6 @@ StepChronopotentiometry - - - - - - - - @@ -9276,6 +8988,14 @@ StepChronopotentiometry + + + + + + + + @@ -9307,6 +9027,14 @@ StrippingVoltammetry + + + + + + + + @@ -9336,21 +9064,13 @@ StrippingVoltammetry - - - - - - + + - - - - @@ -9382,14 +9102,14 @@ Synchrotron - - - - + + + + @@ -9422,24 +9142,24 @@ TensileTesting - - + + - - + + - - + + - + - - + + @@ -9473,24 +9193,24 @@ ThermochemicalTesting - - + + - - + + - - + + - + - - + + @@ -9524,24 +9244,24 @@ Thermogravimetry - - + + - - + + - - + + - + - - + + @@ -9574,34 +9294,34 @@ ThreePointBendingTesting - - - - - - - - + + + + - - + + - - + + + + + + @@ -9633,10 +9353,6 @@ Tomography - - - - @@ -9645,6 +9361,10 @@ Tomography + + + + @@ -9677,24 +9397,24 @@ TransmissionElectronMicroscopy - - + + - - + + - - + + - + - - + + @@ -9727,10 +9447,6 @@ UltrasonicTesting - - - - @@ -9739,6 +9455,10 @@ UltrasonicTesting + + + + @@ -9770,10 +9490,6 @@ UserCase - - - - @@ -9782,6 +9498,10 @@ UserCase + + + + @@ -9814,24 +9534,24 @@ VaporPressureDepressionOsmometry - - + + - - + + - - + + - + - - + + @@ -9865,24 +9585,24 @@ Viscometry - - + + - - + + - - + + - + - - + + @@ -9915,6 +9635,14 @@ Voltammetry + + + + + + + + @@ -9928,29 +9656,21 @@ Voltammetry - - + + - - + + - - - - - - - - @@ -9982,10 +9702,6 @@ VoltammetryAtARotatingDiskElectrode - - - - @@ -9994,6 +9710,10 @@ VoltammetryAtARotatingDiskElectrode + + + + @@ -10029,10 +9749,6 @@ WearTesting - - - - @@ -10041,6 +9757,10 @@ WearTesting + + + + @@ -10072,18 +9792,10 @@ XpsVariableKinetic - - - - - - - - @@ -10092,6 +9804,14 @@ XpsVariableKinetic + + + + + + + + @@ -10123,34 +9843,34 @@ XrayDiffraction - - - - - - - - + + + + - - + + - - + + + + + + @@ -10183,24 +9903,24 @@ XrayPowderDiffraction - - + + - - + + - - + + - + - - + + @@ -10237,14 +9957,14 @@ XrdGrazingIncidence - - - - + + + + @@ -10282,14 +10002,14 @@ hasAccessConditions - - - - + + + + @@ -10325,10 +10045,6 @@ hasBeginCharacterisationTask - - - - @@ -10337,6 +10053,10 @@ hasBeginCharacterisationTask + + + + @@ -10372,10 +10092,6 @@ hasCharacterisationComponent - - - - @@ -10384,6 +10100,10 @@ hasCharacterisationComponent + + + + @@ -10419,10 +10139,6 @@ hasCharacterisationEnvironment - - - - @@ -10431,6 +10147,10 @@ hasCharacterisationEnvironment + + + + @@ -10466,10 +10186,6 @@ hasCharacterisationEnvironmentProperty - - - - @@ -10478,6 +10194,10 @@ hasCharacterisationEnvironmentProperty + + + + @@ -10513,10 +10233,6 @@ hasCharacterisationInput - - - - @@ -10525,6 +10241,10 @@ hasCharacterisationInput + + + + @@ -10560,10 +10280,6 @@ hasCharacterisationMeasurementInstrument - - - - @@ -10572,6 +10288,10 @@ hasCharacterisationMeasurementInstrument + + + + @@ -10607,10 +10327,6 @@ hasCharacterisationOutput - - - - @@ -10619,6 +10335,10 @@ hasCharacterisationOutput + + + + @@ -10654,14 +10374,14 @@ hasCharacterisationProcedureValidation - - - - + + + + @@ -10697,10 +10417,6 @@ hasCharacterisationProperty - - - - @@ -10709,6 +10425,10 @@ hasCharacterisationProperty + + + + @@ -10744,10 +10464,6 @@ hasCharacterisationSoftware - - - - @@ -10756,6 +10472,10 @@ hasCharacterisationSoftware + + + + @@ -10791,10 +10511,6 @@ hasCharacterisationTask - - - - @@ -10803,6 +10519,10 @@ hasCharacterisationTask + + + + @@ -10838,14 +10558,14 @@ hasDataAcquisitionRate - - - - + + + + @@ -10881,14 +10601,14 @@ hasDataProcessingThroughCalibration - - - - + + + + @@ -10924,14 +10644,14 @@ hasDataQuality - - - - + + + + @@ -10967,14 +10687,14 @@ hasDataset - - - - + + + + @@ -11010,14 +10730,14 @@ hasDateOfCalibration - - - - + + + + @@ -11053,10 +10773,6 @@ hasEndCharacterisationTask - - - - @@ -11065,6 +10781,10 @@ hasEndCharacterisationTask + + + + @@ -11100,14 +10820,14 @@ hasHardwareSpecification - - - - + + + + @@ -11143,14 +10863,14 @@ hasHazard - - - - + + + + @@ -11186,14 +10906,14 @@ hasHolder - - - - + + + + @@ -11229,14 +10949,14 @@ hasInstrumentForCalibration - - - - + + + + @@ -11272,14 +10992,14 @@ hasInteractionVolume - - - - + + + + @@ -11315,14 +11035,14 @@ hasInteractionWithProbe - - - - + + + + @@ -11358,14 +11078,14 @@ hasInteractionWithSample - - - - + + + + @@ -11401,14 +11121,14 @@ hasLab - - - - + + + + @@ -11444,14 +11164,14 @@ hasLevelOfAutomation - - - - + + + + @@ -11487,10 +11207,6 @@ hasManufacturer - - - - @@ -11499,6 +11215,10 @@ hasManufacturer + + + + @@ -11534,14 +11254,14 @@ hasMeasurementDetector - - - - + + + + @@ -11577,14 +11297,14 @@ hasMeasurementParameter - - - - + + + + @@ -11620,14 +11340,14 @@ hasMeasurementProbe - - - - + + + + @@ -11663,14 +11383,14 @@ hasMeasurementSample - - - - + + + + @@ -11706,14 +11426,14 @@ hasMeasurementTime - - - - + + + + @@ -11749,10 +11469,6 @@ hasModel - - - - @@ -11761,6 +11477,10 @@ hasModel + + + + @@ -11796,14 +11516,14 @@ hasOperator - - - - + + + + @@ -11839,14 +11559,14 @@ hasPeerReviewedArticle - - - - + + + + @@ -11882,14 +11602,14 @@ hasPhysicsOfInteraction - - - - + + + + @@ -11925,14 +11645,14 @@ hasPostProcessingModel - - - - + + + + @@ -11968,14 +11688,14 @@ hasProcessingReproducibility - - - - + + + + @@ -12011,14 +11731,14 @@ hasReferenceSample - - - - + + + + @@ -12054,14 +11774,14 @@ hasSampleBeforeSamplePreparation - - - - + + + + @@ -12101,14 +11821,14 @@ hasSampleForInspection - - - - + + + + @@ -12144,14 +11864,14 @@ hasSampleInspectionInstrument - - - - + + + + @@ -12187,14 +11907,14 @@ hasSampleInspectionParameter - - - - + + + + @@ -12230,14 +11950,14 @@ hasSamplePreparationInstrument - - - - + + + + @@ -12273,14 +11993,14 @@ hasSamplePreparationParameter - - - - + + + + @@ -12316,14 +12036,14 @@ hasSampledSample - - - - + + + + @@ -12359,10 +12079,6 @@ hasUniqueID - - - - @@ -12371,6 +12087,10 @@ hasUniqueID + + + + @@ -12406,14 +12126,14 @@ requiresLevelOfExpertise - - - - + + + + @@ -12449,21 +12169,21 @@ userCaseHasCharacterisationProcedure - - - - + + + + - - + + diff --git a/chameo-inferred.owl b/chameo-inferred.owl index 04d1b1c..7a46a76 100644 --- a/chameo-inferred.owl +++ b/chameo-inferred.owl @@ -5,8 +5,8 @@ xmlns:owl="http://www.w3.org/2002/07/owl#" xml:base="https://w3id.org/emmo/domain/characterisation-methodology/chameo" xmlns="https://w3id.org/emmo/domain/characterisation-methodology/chameo#" - xmlns:emmo="https://w3id.org/emmo#" xmlns:swrl="http://www.w3.org/2003/11/swrl#" + xmlns:emmo="https://w3id.org/emmo#" xmlns:term="http://purl.org/dc/terms/" xmlns:core="http://www.w3.org/2004/02/skos/core#" xmlns:x_0.1="http://xmlns.com/foaf/0.1/" @@ -51,35 +51,45 @@ https://raw.githubusercontent.com/emmo-repo/domain-characterisation-methodology/main/images/chameo_logo_small.png - - - - - - hasSubCollection - hasSubCollection + + + + + + + A relation between two holistic wholes that properly overlap, sharing one of their holistic parts. + This relation is about two wholes that overlap, and whose intersection is an holistic part of both. + hasHolisticOverlap + hasHolisticOverlap + A relation between two holistic wholes that properly overlap, sharing one of their holistic parts. + A man and the process of building a house. +The man is a whole that possesses an holistic temporal part which is an interval of six monts and represents a working period in his lifetime. +The process of building a house is a whole that possesses an holistic spatial part which is a builder. +The working period of the man and the builder participating the building process are the same individual, belonging both to a man lifetime and to a building holistic views. +In this sense, the man and the building process overcrosses. and the overlapping individual is represented differently in both holistic views. + This relation is about two wholes that overlap, and whose intersection is an holistic part of both. - - - - - - A proper part relation with domain restricted to collections. - hasGatheredPart - hasGatheredPart - A proper part relation with domain restricted to collections. + + + + + + The relation between a holistic whole and its related entities, being them parts or other overlapping entities. + hasHolisticRelation + hasHolisticRelation + The relation between a holistic whole and its related entities, being them parts or other overlapping entities. - - - - + + + + - A proper part relation with range restricted to collections. - hasScatteredPart - hasScatteredPart - A proper part relation with range restricted to collections. + The relation between two entities that overlaps and neither of both is part of the other. + properOverlaps + properOverlaps + The relation between two entities that overlaps and neither of both is part of the other. @@ -93,257 +103,118 @@ Length hasUnit only LengthUnit - + - - - + + + - Relates a quantity to its numerical value through spatial direct parthood. - hasNumericalPart - hasNumericalPart - + Relates a quantity to its metrological reference through a semiotic process. + hasMetrologicalReference + In EMMO version 1.0.0-beta7, physical quantities used the hasMetrologicalReference object property to relate them to their units via physical dimensionality. This was simplified in 1.0.0-alpha3 in order to make reasoning faster. - - - - - - - The relation between a object whole and its spatial part of the same type. - hasPortion - hasPortion - The relation between a object whole and its spatial part of the same type. - A volume of 1 cc of milk within a 1 litre can be considered still milk as a whole. If you scale down to a cluster of molecules, than the milk cannot be considered a fluid no more (and then no more a milk). - +The restriction (e.g. for the physical quantity Length) - - - - - - - The purpose of this relation is to provide a parhood relation that does not go deep enough, in terms of decomposition, to break the holistic definition of the whole. + Length hasMetrologicalReference only (hasPhysicsDimension only LengthDimension) -On the contrary, the holistic parthood, is expected to go that deep. - The superproperty of the relations between a whole and its mereological parts that are still holistic wholes of the same type. - hasRedundantPart - hasRedundantPart - The superproperty of the relations between a whole and its mereological parts that are still holistic wholes of the same type. - A volume of water has redundand parts other volumes of water. All this volumes have holistic parts some water molecules. - The purpose of this relation is to provide a parhood relation that does not go deep enough, in terms of decomposition, to break the holistic definition of the whole. +was in 1.0.0-alpha3 changed to -On the contrary, the holistic parthood, is expected to go that deep. - + Length hasPhysicsDimension some LengthDimension - - - - - - The relation between a holistic whole and its related entities, being them parts or other overlapping entities. - hasHolisticRelation - hasHolisticRelation - The relation between a holistic whole and its related entities, being them parts or other overlapping entities. +Likewise were the universal restrictions on the corresponding unit changed to excistential. E.g. + + Metre hasPhysicsDimension only LengthDimension + +was changed to + + Metre hasPhysicsDimension some LengthDimension + +The label of this class was also changed from PhysicsDimension to PhysicalDimension. + hasMetrologicalReference - - - - - A proper part of a whole, whose parts always cover the full temporal extension of the whole within a spatial interval. - In EMMO FOL this is a defined property. In OWL temporal relations are primitive. - hasSpatialPart - hasSpatialPart - A proper part of a whole, whose parts always cover the full temporal extension of the whole within a spatial interval. - In EMMO FOL this is a defined property. In OWL temporal relations are primitive. + + + + + + A semiotic relation that connects a declared semiotic object to a conventional sign in a declaration process. + hasConvention + hasConvention + A semiotic relation that connects a declared semiotic object to a conventional sign in a declaration process. - - - - - - - The relation between an entity that overlaps another without being its part. - overcrosses - overcrosses - The relation between an entity that overlaps another without being its part. + + + + + + hasConstitutiveProcess + hasConstitutiveProcess - - - - - The relation between two entities that share at least one of their parts. - overlaps - overlaps - The relation between two entities that share at least one of their parts. + + + + + + hasHolisticNonTemporalPart + hasHolisticNonTemporalPart - - + + - isOvercrossedBy - isOvercrossedBy + Causality is the fundamental concept describing how entities affect each other, and occurs before time and space relations. +Embracing a strong reductionistic view, causality originates at quantum entities level. + Each pair of entities is either in isCauseOf or isNotCauseOf relation. The two are mutually exclusive. + The superclass of all causal EMMO relations. + causal + causal + Causality is the fundamental concept describing how entities affect each other, and occurs before time and space relations. +Embracing a strong reductionistic view, causality originates at quantum entities level. + The superclass of all causal EMMO relations. + Each pair of entities is either in isCauseOf or isNotCauseOf relation. The two are mutually exclusive. - - + + + + - isPartOf - isPartOf + The class for all relations used by the EMMO. + EMMORelation + EMMORelation + The class for all relations used by the EMMO. - - - - - A temporal part that is an item. - hasTemporalItemSlice - hasTemporalItemSlice - A temporal part that is an item. + + + + + + hasBehaviour + hasBehaviour - + - - A temporal part that capture the overall spatial extension of the causal object. - hasTemporalSlice - hasTemporalSlice - A temporal part that capture the overall spatial extension of the causal object. + + + + hasHolisticTemporalPart + hasHolisticTemporalPart - - - - - - hasConnectedPortion - hasConnectedPortion - - - - - - A proper part of the whole that is not Spatial or Temporal. - This relation identifies parts of a 4D object that do not fully cover the lifetime extent of the whole (spatial) nor the full spatial extent (temporal). - hasSpatialSection - hasSpatialPartialPart - hasSpatialSection - A proper part of the whole that is not Spatial or Temporal. - This relation identifies parts of a 4D object that do not fully cover the lifetime extent of the whole (spatial) nor the full spatial extent (temporal). - This relation is a filler, to categorise the parts of an entity that are not covered by the other parthood relations. -A proper part is then the disjoint union of: spatial part, temporal part and spatio temporal part relations. - - - - - - - - Relates a prefixed unit to its unit symbol part. - hasUnitSymbol - hasUnitSymbol - Relates a prefixed unit to its unit symbol part. - - - - - - - - Relates a prefixed unit to its non-prefixed part. - hasUnitNonPrefixPart - hasUnitNonPrefixPart - Relates a prefixed unit to its non-prefixed part. - For example the unit CentiNewtonMetre has prefix "Centi" and non-prefix part "NewtonMetre". - - - - - - - - - hasEndCharacterisationTask - hasEndCharacterizationTask - hasEndCharacterisationTask - - - - - - hasEndTask - hasEndTask - - - - - - hasBeginTask - hasBeginTask - - - - - - - - hasTask - hasTask - - - - - - - - - A relation between the whole and one of its tiles, where the tile is both spatially and temporally connected with the other tiles forming the tessellation. - hasJunctionTile - hasJunctionTile - A relation between the whole and one of its tiles, where the tile is both spatially and temporally connected with the other tiles forming the tessellation. - - - - - - - - - - A tile that is connected with other tiles with bi-directional causal relations that fall under hasNext (or its inverse) or hasContact. - This owl:ObjectProperty is, like its super property, a mere collector of direct parthoods that manifest a spatiotemporal meaningful shape. - hasSpatioTemporalTile - hasWellFormedTile - hasSpatioTemporalTile - A tile that is connected with other tiles with bi-directional causal relations that fall under hasNext (or its inverse) or hasContact. - This owl:ObjectProperty is, like its super property, a mere collector of direct parthoods that manifest a spatiotemporal meaningful shape. - - - - - - - - The relation between the whole and a proper part of the whole that scale down to the point which it lose the characteristics of the whole and become something else. - hasHolisticPart - hasHolisticPart - The relation between the whole and a proper part of the whole that scale down to the point which it lose the characteristics of the whole and become something else. - An holistic part of water fluid is a water molecule. - - - - - - - - - hasHolder - hasHolder + + + + + + hasMeasurementDetector + hasMeasurementDetector @@ -357,219 +228,199 @@ A proper part is then the disjoint union of: spatial part, temporal part and spa The relation between a process P and an object whole O that overcrosses it. The intersection between P and O is a participant of P. - - - - - - - A relation between two holistic wholes that properly overlap, sharing one of their holistic parts. - This relation is about two wholes that overlap, and whose intersection is an holistic part of both. - hasHolisticOverlap - hasHolisticOverlap - A relation between two holistic wholes that properly overlap, sharing one of their holistic parts. - A man and the process of building a house. -The man is a whole that possesses an holistic temporal part which is an interval of six monts and represents a working period in his lifetime. -The process of building a house is a whole that possesses an holistic spatial part which is a builder. -The working period of the man and the builder participating the building process are the same individual, belonging both to a man lifetime and to a building holistic views. -In this sense, the man and the building process overcrosses. and the overlapping individual is represented differently in both holistic views. - This relation is about two wholes that overlap, and whose intersection is an holistic part of both. + + + + + + The relation between the whole and a temporal tile that has only ingoing temporal connections. + hasEndTile + hasTemporalLast + hasEndTile + The relation between the whole and a temporal tile that has only ingoing temporal connections. - + - - - + + - The relation grouping all direct parthood relations used in the reductionistic perspective. - This relation is not antitransitive, to enable partitioning of a causal structure with more than one tiling scheme (e.g. time and space partitioning). - Direct parthood is the non transitive version of parthood enabling the establishment of hierarchy of granularities, starting with an entity and providing several tesselation levels according to specific criteria. -The criteria are implemented in specialised versions of the direct parthood relation (e.g., metrological direct part, XML format direct part). -The direct parts (tiles) and the tessellated entity (tessellation) are causally self connected (i.e., items), coherently with the concept behind the definition of the reductionistic perspective. - hasDirectPart - hasDirectPart - Direct parthood is the non transitive version of parthood enabling the establishment of hierarchy of granularities, starting with an entity and providing several tesselation levels according to specific criteria. -The criteria are implemented in specialised versions of the direct parthood relation (e.g., metrological direct part, XML format direct part). -The direct parts (tiles) and the tessellated entity (tessellation) are causally self connected (i.e., items), coherently with the concept behind the definition of the reductionistic perspective. - The relation grouping all direct parthood relations used in the reductionistic perspective. - This relation is not antitransitive, to enable partitioning of a causal structure with more than one tiling scheme (e.g. time and space partitioning). - This relation is a simple collector of all relations inverse functional direct parthoods that can be defined in specialised theories using reductionism. + A relation that establishes for the whole a univocal tessellation in temporal parts forming the tessellation. + hasTemporalTile + hasTemporalDirectPart + hasTemporalTile + A relation that establishes for the whole a univocal tessellation in temporal parts forming the tessellation. - + - - + + + - The relation between an entity and one of its parts, when both entities are distinct. - hasProperPart - hasProperPart - The relation between an entity and one of its parts, when both entities are distinct. + A temporal relation between two entities occurs when the two entities are in a one directional causality relation. The idea is that a temporal relation always implies a one-directional causality between two entities, leading to a asymmetric relation. +This means that the causing entity can be in direct and optionally indirect causality relation with the effect entity. On the contrary, the effect entity cannot be in any causal relation (direct or indirect) with the causing entity. + A time contact occurs when x isDirectCause y and not(y isCauseOf x). + Each pair of entities in direct causality relation is either in hasNext or hasTwoWayCauseWith relation. The two are mutually exclusive. + hasNext + isBefore + hasNext + A temporal relation between two entities occurs when the two entities are in a one directional causality relation. The idea is that a temporal relation always implies a one-directional causality between two entities, leading to a asymmetric relation. +This means that the causing entity can be in direct and optionally indirect causality relation with the effect entity. On the contrary, the effect entity cannot be in any causal relation (direct or indirect) with the causing entity. + A time contact occurs when x isDirectCause y and not(y isCauseOf x). + Each pair of entities in direct causality relation is either in hasNext or hasTwoWayCauseWith relation. The two are mutually exclusive. + This relation is asymmetric and irreflexive. - - + + + + - A relation that identify a proper item part of the whole, whose parts always cover the full spatial extension of the whole within a time interval. - A temporal part of an item cannot both cause and be caused by any other proper part of the item. - -A temporal part is not constraint to be causally self-connected, i.e. it can be either an item or a collection. We therefore introduce two subproperties in order to distinguish between both cases. - hasTemporalPart - hasTemporalPart - A relation that identify a proper item part of the whole, whose parts always cover the full spatial extension of the whole within a time interval. - A temporal part of an item cannot both cause and be caused by any other proper part of the item. - -A temporal part is not constraint to be causally self-connected, i.e. it can be either an item or a collection. We therefore introduce two subproperties in order to distinguish between both cases. - In EMMO FOL this is a defined property. In OWL temporal relations are primitive. + A causal relation between the causing and the effected entities occurring without intermediaries. + Direct causality is a concept that capture the idea of contact between two entities, given the fact that there are no causal intermediaries between them. It requires that at least a quantum of the causing entity is direct cause of a quantum of the caused entity. +It does not exclude the possibility of indirect causal routes between proper parts of the two entities. + Direct cause is irreflexive. + isDirectCauseOf + isDirectCauseOf + Direct causality is a concept that capture the idea of contact between two entities, given the fact that there are no causal intermediaries between them. It requires that at least a quantum of the causing entity is direct cause of a quantum of the caused entity. +It does not exclude the possibility of indirect causal routes between proper parts of the two entities. + A causal relation between the causing and the effected entities occurring without intermediaries. + Direct cause is irreflexive. + Direct cause provides the edges for the transitive restriction of the direct acyclic causal graph whose nodes are the quantum entities. - + - - - - A relation between the whole and one of its tiles, where the tile is only spatially connected with the other tiles forming the tessellation. - hasSpatialTile - hasSpatialDirectPart - hasSpatialTile - A relation between the whole and one of its tiles, where the tile is only spatially connected with the other tiles forming the tessellation. - - - - - + - All other mereology relations can be defined in FOL using hasPart as primitive. - The primitive relation that express the concept of an entity being part of another one. - hasPart - hasPart - The primitive relation that express the concept of an entity being part of another one. - All other mereology relations can be defined in FOL using hasPart as primitive. + isTemporallyBefore + isTemporallyBefore - - + + - - - + + - A causal relation between the y effected and the x causing entities with intermediaries, where x isCauseOf y and not(y isCauseOf x). - isPredecessorOf - isAntecedentOf - isPredecessorOf - A causal relation between the y effected and the x causing entities with intermediaries, where x isCauseOf y and not(y isCauseOf x). - - - - - - A relation that identify a proper part of the whole that extends itself in time along the overall lifetime of the whole, and whose parts never cover the full spatial extension of the 4D whole. - In EMMO FOL this is a defined property. In OWL spatial relations are primitive. - hasSpatialSlice - hasSpatialIntegralPart - hasSpatialSlice - A relation that identify a proper part of the whole that extends itself in time along the overall lifetime of the whole, and whose parts never cover the full spatial extension of the 4D whole. - In EMMO FOL this is a defined property. In OWL spatial relations are primitive. + A spatial contact between two entities occurs when the two entities are in an interaction relation whose causal structure is a representation of the fundamental interactions between elementary particles (Feynman diagrams). +It means that if two entities are in contact, then there is at least a couple of elementary particles, one part of the first and one part of the second, interacting according to one of the fundamental interactions through virtual particles. This kind of connection is space-like (i.e. interconnecting force carrier particle is offshelf). +Contacts between two entities exclude the possibility of other causal relations that are not included in a fundamental space-like interaction. + An interaction that is the sum of direct causality relations between two entities that are interpretable as fundamental physical interactions. + Spatial contact is symmetric and irreflexive. + contacts + hasSpatiialnteractionWith + contacts + A spatial contact between two entities occurs when the two entities are in an interaction relation whose causal structure is a representation of the fundamental interactions between elementary particles (Feynman diagrams). +It means that if two entities are in contact, then there is at least a couple of elementary particles, one part of the first and one part of the second, interacting according to one of the fundamental interactions through virtual particles. This kind of connection is space-like (i.e. interconnecting force carrier particle is offshelf). +Contacts between two entities exclude the possibility of other causal relations that are not included in a fundamental space-like interaction. + An interaction that is the sum of direct causality relations between two entities that are interpretable as fundamental physical interactions. + Spatial contact is symmetric and irreflexive. + The contact relation is not an ordering relation since is symmetric. - - - - + + + + - hasSampleInspectionParameter - hasSampleInspectionParameter + hasInteractionVolume + hasInteractionVolume - + + + + + + Participation is a parthood relation: you must be part of the process to contribute to it. A participant whose 4D extension is totally contained within the process. + +Participation is not under direct parthood since a process is not strictly related to reductionism, but it's a way to categorize temporal regions by the interpreters. + The relation between a process and an object participating to it, i.e. that is relevant to the process itself. + hasParticipant + hasParticipant + The relation between a process and an object participating to it, i.e. that is relevant to the process itself. + + + - The input of a process. - hasInput - hasInput - The input of a process. + The outcome of a process. + The partial overlapping is required since the creating process is distinct with the process in which the output is used or consumed. + hasOutput + hasOutput + The outcome of a process. + The partial overlapping is required since the creating process is distinct with the process in which the output is used or consumed. - - - - + + + + - hasMeasurementParameter - hasMeasurementParameter + hasSampleForInspection + hasSampleForInspection - - + - - - - - Relates a quantity to its metrological reference through a semiotic process. - hasMetrologicalReference - In EMMO version 1.0.0-beta7, physical quantities used the hasMetrologicalReference object property to relate them to their units via physical dimensionality. This was simplified in 1.0.0-alpha3 in order to make reasoning faster. - -The restriction (e.g. for the physical quantity Length) - - Length hasMetrologicalReference only (hasPhysicsDimension only LengthDimension) - -was in 1.0.0-alpha3 changed to - - Length hasPhysicsDimension some LengthDimension - -Likewise were the universal restrictions on the corresponding unit changed to excistential. E.g. - - Metre hasPhysicsDimension only LengthDimension - -was changed to - - Metre hasPhysicsDimension some LengthDimension + + + + The relation between an entity and one of its parts, when both entities are distinct. + hasProperPart + hasProperPart + The relation between an entity and one of its parts, when both entities are distinct. + -The label of this class was also changed from PhysicsDimension to PhysicalDimension. - hasMetrologicalReference + + + + + All other mereology relations can be defined in FOL using hasPart as primitive. + The primitive relation that express the concept of an entity being part of another one. + hasPart + hasPart + The primitive relation that express the concept of an entity being part of another one. + All other mereology relations can be defined in FOL using hasPart as primitive. - - - - - - A semiotic relation that connects a recognised semiotic object to an icon in a cognition process. - hasIcon - hasIcon - A semiotic relation that connects a recognised semiotic object to an icon in a cognition process. + + + + + + + The relation between an entity that overlaps another without being its part. + overcrosses + overcrosses + The relation between an entity that overlaps another without being its part. - - - - - - A relation that connects the semiotic object to the sign in a semiotic process. - hasSign - hasSign - A relation that connects the semiotic object to the sign in a semiotic process. + + + + + + hasSubObject + hasSubObject - + - - - - Relates a dataset to its datum. - hasDatum - hasDatum - Relates a dataset to its datum. + + + + hasConnectedPortion + hasConnectedPortion @@ -586,60 +437,6 @@ The label of this class was also changed from PhysicsDimension to PhysicalDimens A proper part relation with domain restricted to items. - - - - - - hasManufacturedOutput - hasManufacturedOutput - - - - - - - hasProductOutput - hasProductOutput - - - - - - A temporal part that is not a slice. - hasTemporalSection - hasTemporalSection - A temporal part that is not a slice. - - - - - - - - hasCollaborationWith - hasCollaborationWith - - - - - - - - - isSpatiallyRelatedWith - isSpatiallyRelatedWith - - - - - - - - hasSubItem - hasSubItem - - @@ -652,109 +449,24 @@ The label of this class was also changed from PhysicsDimension to PhysicalDimens A proper part relation with range restricted to items. - - - - - - hasMeasurementProbe - hasMeasurementProbe + + + + + Relates a resource to its identifier. + hasResourceIdentifier + hasResourceIdentifier + Relates a resource to its identifier. - - - - - - hasStage - hasStage - - - - - - - - hasHolisticTemporalPart - hasHolisticTemporalPart - - - - - - - - isTemporallyBefore - isTemporallyBefore - - - - - - - Each pair of causally connected entities is either in isDirectCauseOf or isIndirectCauseOf relation. The two are mutually exclusive. - The relation between an individuals x and y, that holds if and only if: -a) y having a part that is causing an effect on a part of x -b) y and x non-overlapping - We say that an entity causes another if there is a quantum part of the first that is in causal relation with a quantum parts of the second. -An entity cannot cause itself (causal loops are forbidden) or a part of itself. For this reasons causality between entities excludes reflexivity and prevents them to overlap. - isCauseOf - isCauseOf - We say that an entity causes another if there is a quantum part of the first that is in causal relation with a quantum parts of the second. -An entity cannot cause itself (causal loops are forbidden) or a part of itself. For this reasons causality between entities excludes reflexivity and prevents them to overlap. - The relation between an individuals x and y, that holds if and only if: -a) y having a part that is causing an effect on a part of x -b) y and x non-overlapping - :isCauseOf owl:propertyDisjointWith :overlaps - Each pair of causally connected entities is either in isDirectCauseOf or isIndirectCauseOf relation. The two are mutually exclusive. - It applies to both quantums and macro-entities (entities made of more than one quantum). It is admissible for two entities to be one the cause of the other, excepts when they are both quantums. - The OWL 2 DL version of the EMMO introduces this object property as primitive causal relation. It refers to the macro causality relation mC(x,y), defined in the EMMO FOL version. -While the EMMO FOL introduces the quantum causality relation C(x,y) as primitive, the OWL 2 DL version substantially simplifies the theory, neglecting these lower level relations that are well above DL expressivity. - - - - - - - - - The relation between two causally reachable entities through a path of contacts relations (i.e. representing physical interactions). - isConcomitantWith - alongsideOf - isConcomitantWith - The relation between two causally reachable entities through a path of contacts relations (i.e. representing physical interactions). - - - - - - - A causal relation between the effected and the causing entities with intermediaries. - An indirect cause is a relation between two entities that is mediated by a intermediate entity. In other words, there are no quantum parts of the causing entity that are direct cause of quantum parts of the caused entity. - isIndirectCauseOf - isIndirectCauseOf - An indirect cause is a relation between two entities that is mediated by a intermediate entity. In other words, there are no quantum parts of the causing entity that are direct cause of quantum parts of the caused entity. - A causal relation between the effected and the causing entities with intermediaries. - - - - - - - - - hasCharacterisationMeasurementInstrument - hasCharacterizationMeasurementInstrument - hasCharacterisationMeasurementInstrument - - - - - - - Relates an object to a quantity describing a quantifiable property of the object obtained via a well-defined procedure. - hasObjectiveProperty - hasObjectiveProperty + + + + + + + hasDataQuality + hasDataQuality @@ -768,710 +480,497 @@ While the EMMO FOL introduces the quantum causality relation C(x,y) as primitive A semiotic relation that connects a semiotic object to a property in a declaration process. - - - - - - The class for all relations used by the EMMO. - EMMORelation - EMMORelation - The class for all relations used by the EMMO. - - - - - - - - - hasSamplePreparationInstrument - hasSamplePreparationInstrument - - - - + + + + - The generic EMMO semiotical relation. - semiotical - semiotical - The generic EMMO semiotical relation. - - - - - - - - - A relation that establishes for the whole a univocal tessellation in temporal parts forming the tessellation. - hasTemporalTile - hasTemporalDirectPart - hasTemporalTile - A relation that establishes for the whole a univocal tessellation in temporal parts forming the tessellation. - - - - - - - - The relation between an object and one of its holistic part that contributes to the object under some spatial-based criteria. - hasConstituent - hasConstituent - The relation between an object and one of its holistic part that contributes to the object under some spatial-based criteria. + A semiotic relation connecting a declaring interpreter to the "declared" semiotic object in a declaration process. + hasDeclared + hasDeclared + A semiotic relation connecting a declaring interpreter to the "declared" semiotic object in a declaration process. - - - - - - hasHolisticNonTemporalPart - hasHolisticNonTemporalPart + + + + + + A relation that connects the interpreter to the semiotic object in a semiotic process. + hasReferent + hasSemioticObject + hasReferent + A relation that connects the interpreter to the semiotic object in a semiotic process. - - + + + + - Causality is the fundamental concept describing how entities affect each other, and occurs before time and space relations. -Embracing a strong reductionistic view, causality originates at quantum entities level. - Each pair of entities is either in isCauseOf or isNotCauseOf relation. The two are mutually exclusive. - The superclass of all causal EMMO relations. - causal - causal - Causality is the fundamental concept describing how entities affect each other, and occurs before time and space relations. -Embracing a strong reductionistic view, causality originates at quantum entities level. - The superclass of all causal EMMO relations. - Each pair of entities is either in isCauseOf or isNotCauseOf relation. The two are mutually exclusive. + hasFractionalCollection + hasFractionalCollection - - + + - - - hasScatteredPortion - hasScatteredPortion - - - - - - - hasMaximalCollection - hasMaximalCollection + hasSubCollection + hasSubCollection - + - - hasMaximalPart - hasMaximalPart + hasNonMaximalPart + hasNonMaximalPart - + - - - - + + - A temporal relation between two entities occurs when the two entities are in a one directional causality relation. The idea is that a temporal relation always implies a one-directional causality between two entities, leading to a asymmetric relation. -This means that the causing entity can be in direct and optionally indirect causality relation with the effect entity. On the contrary, the effect entity cannot be in any causal relation (direct or indirect) with the causing entity. - A time contact occurs when x isDirectCause y and not(y isCauseOf x). - Each pair of entities in direct causality relation is either in hasNext or hasTwoWayCauseWith relation. The two are mutually exclusive. - hasNext - isBefore - hasNext - A temporal relation between two entities occurs when the two entities are in a one directional causality relation. The idea is that a temporal relation always implies a one-directional causality between two entities, leading to a asymmetric relation. -This means that the causing entity can be in direct and optionally indirect causality relation with the effect entity. On the contrary, the effect entity cannot be in any causal relation (direct or indirect) with the causing entity. - A time contact occurs when x isDirectCause y and not(y isCauseOf x). - Each pair of entities in direct causality relation is either in hasNext or hasTwoWayCauseWith relation. The two are mutually exclusive. - This relation is asymmetric and irreflexive. - - - - - - - - - hasCharacterisationTask - hasCharacterizationTask - hasCharacterisationTask + A proper part relation with domain restricted to collections. + hasGatheredPart + hasGatheredPart + A proper part relation with domain restricted to collections. - - + + + + + - The outcome of a process. - The partial overlapping is required since the creating process is distinct with the process in which the output is used or consumed. - hasOutput - hasOutput - The outcome of a process. - The partial overlapping is required since the creating process is distinct with the process in which the output is used or consumed. + The relation between a process whole and a temporal part of the same type. + hasInterval + hasInterval + The relation between a process whole and a temporal part of the same type. - - - - The part is not connected with the rest item or members with hasNext (or its inverse) only or hasContact relations only. - hasHeterogeneousPart - hasHeterogeneousPart - The part is not connected with the rest item or members with hasNext (or its inverse) only or hasContact relations only. + + + + + + + The purpose of this relation is to provide a parhood relation that does not go deep enough, in terms of decomposition, to break the holistic definition of the whole. + +On the contrary, the holistic parthood, is expected to go that deep. + The superproperty of the relations between a whole and its mereological parts that are still holistic wholes of the same type. + hasRedundantPart + hasRedundantPart + The superproperty of the relations between a whole and its mereological parts that are still holistic wholes of the same type. + A volume of water has redundand parts other volumes of water. All this volumes have holistic parts some water molecules. + The purpose of this relation is to provide a parhood relation that does not go deep enough, in terms of decomposition, to break the holistic definition of the whole. + +On the contrary, the holistic parthood, is expected to go that deep. - + - The part is not connected with the rest item or members with hasNext relation (or its inverse). - hasNonTemporalPart - hasNonTemporalPart - The part is not connected with the rest item or members with hasNext relation (or its inverse). - - - - - - - - A semiotic relation connecting a declaring interpreter to the "declared" semiotic object in a declaration process. - hasDeclared - hasDeclared - A semiotic relation connecting a declaring interpreter to the "declared" semiotic object in a declaration process. - + A relation that identify a proper item part of the whole, whose parts always cover the full spatial extension of the whole within a time interval. + A temporal part of an item cannot both cause and be caused by any other proper part of the item. - - - - - - A relation that connects the interpreter to the semiotic object in a semiotic process. - hasReferent - hasSemioticObject - hasReferent - A relation that connects the interpreter to the semiotic object in a semiotic process. - +A temporal part is not constraint to be causally self-connected, i.e. it can be either an item or a collection. We therefore introduce two subproperties in order to distinguish between both cases. + hasTemporalPart + hasTemporalPart + A relation that identify a proper item part of the whole, whose parts always cover the full spatial extension of the whole within a time interval. + A temporal part of an item cannot both cause and be caused by any other proper part of the item. - - - - - Assigns a quantity to an object via a well-defined modelling procedure. - hasModelledProperty - hasModelledProperty - Assigns a quantity to an object via a well-defined modelling procedure. +A temporal part is not constraint to be causally self-connected, i.e. it can be either an item or a collection. We therefore introduce two subproperties in order to distinguish between both cases. + In EMMO FOL this is a defined property. In OWL temporal relations are primitive. - - - - - - - hasInteractionWithProbe - hasInteractionWithProbe + + + + + The relation between two entities that share at least one of their parts. + overlaps + overlaps + The relation between two entities that share at least one of their parts. - - - - - - Participation is a parthood relation: you must be part of the process to contribute to it. A participant whose 4D extension is totally contained within the process. - -Participation is not under direct parthood since a process is not strictly related to reductionism, but it's a way to categorize temporal regions by the interpreters. - The relation between a process and an object participating to it, i.e. that is relevant to the process itself. - hasParticipant - hasParticipant - The relation between a process and an object participating to it, i.e. that is relevant to the process itself. + + + + isPartOf + isPartOf - + - - + + - hasDataQuality - hasDataQuality + hasHardwareSpecification + hasHardwareSpecification - - - - - + + - The relation between a collection and one of its item members. - hasMember - hasMember - The relation between a collection and one of its item members. - - - - - - - Relates a resource to its identifier. - hasResourceIdentifier - hasResourceIdentifier - Relates a resource to its identifier. + A temporal part that is not a slice. + hasTemporalSection + hasTemporalSection + A temporal part that is not a slice. - - - - + + + + - hasPhysicsOfInteraction - hasPhysicsOfInteraction + hasBeginCharacterisationTask + hasBeginCharacterizationTask + hasBeginCharacterisationTask - - - - hasModel - hasModel + + + + hasBeginTask + hasBeginTask - - - - - + + - A spatial contact between two entities occurs when the two entities are in an interaction relation whose causal structure is a representation of the fundamental interactions between elementary particles (Feynman diagrams). -It means that if two entities are in contact, then there is at least a couple of elementary particles, one part of the first and one part of the second, interacting according to one of the fundamental interactions through virtual particles. This kind of connection is space-like (i.e. interconnecting force carrier particle is offshelf). -Contacts between two entities exclude the possibility of other causal relations that are not included in a fundamental space-like interaction. - An interaction that is the sum of direct causality relations between two entities that are interpretable as fundamental physical interactions. - Spatial contact is symmetric and irreflexive. - contacts - hasSpatiialnteractionWith - contacts - A spatial contact between two entities occurs when the two entities are in an interaction relation whose causal structure is a representation of the fundamental interactions between elementary particles (Feynman diagrams). -It means that if two entities are in contact, then there is at least a couple of elementary particles, one part of the first and one part of the second, interacting according to one of the fundamental interactions through virtual particles. This kind of connection is space-like (i.e. interconnecting force carrier particle is offshelf). -Contacts between two entities exclude the possibility of other causal relations that are not included in a fundamental space-like interaction. - An interaction that is the sum of direct causality relations between two entities that are interpretable as fundamental physical interactions. - Spatial contact is symmetric and irreflexive. - The contact relation is not an ordering relation since is symmetric. + A relation that identify a proper part of the whole that extends itself in time along the overall lifetime of the whole, and whose parts never cover the full spatial extension of the 4D whole. + In EMMO FOL this is a defined property. In OWL spatial relations are primitive. + hasSpatialSlice + hasSpatialIntegralPart + hasSpatialSlice + A relation that identify a proper part of the whole that extends itself in time along the overall lifetime of the whole, and whose parts never cover the full spatial extension of the 4D whole. + In EMMO FOL this is a defined property. In OWL spatial relations are primitive. - - - - + + + + - A causal relation between the causing and the effected entities occurring without intermediaries. - Direct causality is a concept that capture the idea of contact between two entities, given the fact that there are no causal intermediaries between them. It requires that at least a quantum of the causing entity is direct cause of a quantum of the caused entity. -It does not exclude the possibility of indirect causal routes between proper parts of the two entities. - Direct cause is irreflexive. - isDirectCauseOf - isDirectCauseOf - Direct causality is a concept that capture the idea of contact between two entities, given the fact that there are no causal intermediaries between them. It requires that at least a quantum of the causing entity is direct cause of a quantum of the caused entity. -It does not exclude the possibility of indirect causal routes between proper parts of the two entities. - A causal relation between the causing and the effected entities occurring without intermediaries. - Direct cause is irreflexive. - Direct cause provides the edges for the transitive restriction of the direct acyclic causal graph whose nodes are the quantum entities. + hasFractionalMember + hasFractionalMember - - - - - + + + + - - The inverse relation for hasProperPart. - isProperPartOf - isProperPartOf - The inverse relation for hasProperPart. + hasSubItem + hasSubItem - - - - - - hasHazard - hasHazard + + + + + A proper part of a whole, whose parts always cover the full temporal extension of the whole within a spatial interval. + In EMMO FOL this is a defined property. In OWL temporal relations are primitive. + hasSpatialPart + hasSpatialPart + A proper part of a whole, whose parts always cover the full temporal extension of the whole within a spatial interval. + In EMMO FOL this is a defined property. In OWL temporal relations are primitive. - - - - - - hasDataset - hasDataset + + + + The part is not connected with the rest item or members with hasNext relation (or its inverse). + hasNonTemporalPart + hasNonTemporalPart + The part is not connected with the rest item or members with hasNext relation (or its inverse). - - - - - - - hasCharacterisationProperty - hasCharacterizationProperty - hasCharacterisationProperty + + + + + + + + A tile that is connected with other tiles with bi-directional causal relations that fall under hasNext (or its inverse) or hasContact. + This owl:ObjectProperty is, like its super property, a mere collector of direct parthoods that manifest a spatiotemporal meaningful shape. + hasSpatioTemporalTile + hasWellFormedTile + hasSpatioTemporalTile + A tile that is connected with other tiles with bi-directional causal relations that fall under hasNext (or its inverse) or hasContact. + This owl:ObjectProperty is, like its super property, a mere collector of direct parthoods that manifest a spatiotemporal meaningful shape. - - - - - Assigns a quantity to an object via a well-defined measurement procedure. - hasMeasuredProperty - hasMeasuredProperty - Assigns a quantity to an object via a well-defined measurement procedure. + + + + + + + + The relation grouping all direct parthood relations used in the reductionistic perspective. + This relation is not antitransitive, to enable partitioning of a causal structure with more than one tiling scheme (e.g. time and space partitioning). + Direct parthood is the non transitive version of parthood enabling the establishment of hierarchy of granularities, starting with an entity and providing several tesselation levels according to specific criteria. +The criteria are implemented in specialised versions of the direct parthood relation (e.g., metrological direct part, XML format direct part). +The direct parts (tiles) and the tessellated entity (tessellation) are causally self connected (i.e., items), coherently with the concept behind the definition of the reductionistic perspective. + hasDirectPart + hasDirectPart + Direct parthood is the non transitive version of parthood enabling the establishment of hierarchy of granularities, starting with an entity and providing several tesselation levels according to specific criteria. +The criteria are implemented in specialised versions of the direct parthood relation (e.g., metrological direct part, XML format direct part). +The direct parts (tiles) and the tessellated entity (tessellation) are causally self connected (i.e., items), coherently with the concept behind the definition of the reductionistic perspective. + The relation grouping all direct parthood relations used in the reductionistic perspective. + This relation is not antitransitive, to enable partitioning of a causal structure with more than one tiling scheme (e.g. time and space partitioning). + This relation is a simple collector of all relations inverse functional direct parthoods that can be defined in specialised theories using reductionism. - - - - - hasCharacterisationOutput - hasCharacterizationOutput - hasCharacterisationOutput + + + + + + x isNotCauseOf y iff not(x isCauseOf y) + isNotCauseOf + isNotCauseOf + x isNotCauseOf y iff not(x isCauseOf y) - - - - - - hasBehaviour - hasBehaviour + + + + + Each pair of causally connected entities is either in isDirectCauseOf or isIndirectCauseOf relation. The two are mutually exclusive. + The relation between an individuals x and y, that holds if and only if: +a) y having a part that is causing an effect on a part of x +b) y and x non-overlapping + We say that an entity causes another if there is a quantum part of the first that is in causal relation with a quantum parts of the second. +An entity cannot cause itself (causal loops are forbidden) or a part of itself. For this reasons causality between entities excludes reflexivity and prevents them to overlap. + isCauseOf + isCauseOf + We say that an entity causes another if there is a quantum part of the first that is in causal relation with a quantum parts of the second. +An entity cannot cause itself (causal loops are forbidden) or a part of itself. For this reasons causality between entities excludes reflexivity and prevents them to overlap. + The relation between an individuals x and y, that holds if and only if: +a) y having a part that is causing an effect on a part of x +b) y and x non-overlapping + :isCauseOf owl:propertyDisjointWith :overlaps + Each pair of causally connected entities is either in isDirectCauseOf or isIndirectCauseOf relation. The two are mutually exclusive. + It applies to both quantums and macro-entities (entities made of more than one quantum). It is admissible for two entities to be one the cause of the other, excepts when they are both quantums. + The OWL 2 DL version of the EMMO introduces this object property as primitive causal relation. It refers to the macro causality relation mC(x,y), defined in the EMMO FOL version. +While the EMMO FOL introduces the quantum causality relation C(x,y) as primitive, the OWL 2 DL version substantially simplifies the theory, neglecting these lower level relations that are well above DL expressivity. - - - - + + - hasSampledSample - hasSampledSample + hasCharacterisationComponent + hasCharacterizationComponent + hasCharacterisationComponent - - - + + + + - The relation within a process and an agengt participant. - hasAgent - hasAgent - The relation within a process and an agengt participant. - - - - - - - - - hasCharacterisationProcedureValidation - hasCharacterisationProcedureValidation + hasComponent + hasComponent - - - - - - - hasCharacterisationEnvironmentProperty - hasCharacterizationEnvironmentProperty - hasCharacterisationEnvironmentProperty + + + + + + The relation between the whole and a proper part of the whole that scale down to the point which it lose the characteristics of the whole and become something else. + hasHolisticPart + hasHolisticPart + The relation between the whole and a proper part of the whole that scale down to the point which it lose the characteristics of the whole and become something else. + An holistic part of water fluid is a water molecule. - + - - + - Assigns a quantifiable uncertainty to an objective property through a well-defined procecure. - Since measurement uncertainty is a subclass of objective property, this relation can also describe the uncertainty of an measurement uncertainty. - hasMetrologicalUncertainty - hasMetrologicalUncertainty - Assigns a quantifiable uncertainty to an objective property through a well-defined procecure. - Since measurement uncertainty is a subclass of objective property, this relation can also describe the uncertainty of an measurement uncertainty. - - - - - - - - A semiotic relation connecting a decucing interpreter to the "deduced" semiotic object in a deduction process. - hasDeduced - hasDeduced - A semiotic relation connecting a decucing interpreter to the "deduced" semiotic object in a deduction process. - - - - - - - - A semiotic relation that connects a declared semiotic object to a conventional sign in a declaration process. - hasConvention - hasConvention - A semiotic relation that connects a declared semiotic object to a conventional sign in a declaration process. - - - - - - - - - hasPostProcessingModel - hasPostProcessingModel + Assigns a quantity to an object via a well-defined measurement procedure. + hasMeasuredProperty + hasMeasuredProperty + Assigns a quantity to an object via a well-defined measurement procedure. - - - - - hasServiceOutput - hasServiceOutput + + + + + Relates an object to a quantity describing a quantifiable property of the object obtained via a well-defined procedure. + hasObjectiveProperty + hasObjectiveProperty - - - + + + + - hasFractionalCollection - hasFractionalCollection + The relation between a collection and one of its item members. + hasMember + hasMember + The relation between a collection and one of its item members. - - + + + + + - hasNonMaximalPart - hasNonMaximalPart + The relation between two causally reachable entities through a path of contacts relations (i.e. representing physical interactions). + isConcomitantWith + alongsideOf + isConcomitantWith + The relation between two causally reachable entities through a path of contacts relations (i.e. representing physical interactions). - - - - - - - hasSampleForInspection - hasSampleForInspection + + + + + + + isSpatiallyRelatedWith + isSpatiallyRelatedWith - - - + + + - - x isNotCauseOf y iff not(x isCauseOf y) - isNotCauseOf - isNotCauseOf - x isNotCauseOf y iff not(x isCauseOf y) - - - - - - isPortionPartOf - isPortionPartOf - - - - - - - - - hasDataAcquisitionRate - hasDataAcquisitionRate - - - - - - The EMMO adheres to Atomistic General Extensional Mereology (AGEM). - The superclass of all mereological EMMO relations. - mereological - mereological - The superclass of all mereological EMMO relations. - The EMMO adheres to Atomistic General Extensional Mereology (AGEM). + A causal relation between the effected and the causing entities with intermediaries. + An indirect cause is a relation between two entities that is mediated by a intermediate entity. In other words, there are no quantum parts of the causing entity that are direct cause of quantum parts of the caused entity. + isIndirectCauseOf + isIndirectCauseOf + An indirect cause is a relation between two entities that is mediated by a intermediate entity. In other words, there are no quantum parts of the causing entity that are direct cause of quantum parts of the caused entity. + A causal relation between the effected and the causing entities with intermediaries. - - - - + + + - hasConstitutiveProcess - hasConstitutiveProcess + The relation between a process and the entity that represents how things have turned out. + hasOutcome + hasOutcome + The relation between a process and the entity that represents how things have turned out. - - - - + + + + - hasAccessConditions - hasAccessConditions - - - - - - - - A semiotic relation connecting a recognising interpreter to the "cognised" semiotic object in a cognition process. - hasCognised - hasCognised - A semiotic relation connecting a recognising interpreter to the "cognised" semiotic object in a cognition process. + hasHolder + hasHolder - - - - - A relation that connects a semiotic object to the interpretant in a semiotic process. - hasInterpretant - hasInterpretant - A relation that connects a semiotic object to the interpretant in a semiotic process. + + + + A proper part of the whole that is not Spatial or Temporal. + This relation identifies parts of a 4D object that do not fully cover the lifetime extent of the whole (spatial) nor the full spatial extent (temporal). + hasSpatialSection + hasSpatialPartialPart + hasSpatialSection + A proper part of the whole that is not Spatial or Temporal. + This relation identifies parts of a 4D object that do not fully cover the lifetime extent of the whole (spatial) nor the full spatial extent (temporal). + This relation is a filler, to categorise the parts of an entity that are not covered by the other parthood relations. +A proper part is then the disjoint union of: spatial part, temporal part and spatio temporal part relations. - + - - - The relation between the whole and a temporal tile that has only ingoing temporal connections. - hasEndTile - hasTemporalLast - hasEndTile - The relation between the whole and a temporal tile that has only ingoing temporal connections. - - - - - - - - hasOperator - hasOperator + + + + + The inverse relation for hasProperPart. + isProperPartOf + isProperPartOf + The inverse relation for hasProperPart. - - - - - - hasCharacteriser - hasCharacteriser + + + + + + The relation between an object and one of its holistic part that contributes to the object under some spatial-based criteria. + hasConstituent + hasConstituent + The relation between an object and one of its holistic part that contributes to the object under some spatial-based criteria. - - - - + + + + - A semiotic relation connecting a conventional sign to the interpreter (declarer) in a declaration process. - hasDeclarer - hasDeclarer - A semiotic relation connecting a conventional sign to the interpreter (declarer) in a declaration process. + A semiotic relation that connects a deduced semiotic object to an indexin a deduction process. + hasIndex + hasIndex + A semiotic relation that connects a deduced semiotic object to an indexin a deduction process. - - - - - - - hasReferenceSample - hasReferenceSample + + + + + + A relation that connects the semiotic object to the sign in a semiotic process. + hasSign + hasSign + A relation that connects the semiotic object to the sign in a semiotic process. - - + + + + - hasCharacterisationInput - hasCharacterizationInput - hasCharacterisationInput - - - - - - - - The relation between a process and one of its process parts. - hasSubProcess - hasSubProcess - The relation between a process and one of its process parts. - - - - - - - - hasFractionalMember - hasFractionalMember - - - - - - - Relates the result of a semiotic process to ont of its optained quantities. - hasQuantity - hasQuantity - Relates the result of a semiotic process to ont of its optained quantities. - - - - - - - - - - The relation between a process whole and a temporal part of the same type. - hasInterval - hasInterval - The relation between a process whole and a temporal part of the same type. + hasCharacterisationEnvironment + hasCharacterizationEnvironment + hasCharacterisationEnvironment - - - + + + + - The part is connected with the rest item or members with hasNext (or its inverse) and hasContact relations only. - hasJunctionPart - hasSpatioTemporalPart - hasJunctionPart - The part is connected with the rest item or members with hasNext (or its inverse) and hasContact relations only. + A proper part relation with range restricted to collections. + hasScatteredPart + hasScatteredPart + A proper part relation with range restricted to collections. - - - + + + - hasInteractionWithSample - hasInteractionWithSample + hasSampledSample + hasSampledSample @@ -1486,56 +985,17 @@ It does not exclude the possibility of indirect causal routes between proper par The relation between the whole and a temporal tile that has only outgoing temporal connections. - - - - - - - hasHardwareSpecification - hasHardwareSpecification - - - - - - - - - hasProcessingReproducibility - hasProcessingReproducibility - - - - - - - - A semiotic relation that connects a declared semiotic object to a description in a declaration process. - hasDescription - hasDescription - A semiotic relation that connects a declared semiotic object to a description in a declaration process. - - - - - - - - A semiotic relation that connects a deduced semiotic object to an indexin a deduction process. - hasIndex - hasIndex - A semiotic relation that connects a deduced semiotic object to an indexin a deduction process. - - - - + + - - - - notOverlaps - notOverlaps + + + + A relation between the whole and one of its tiles, where the tile is only spatially connected with the other tiles forming the tessellation. + hasSpatialTile + hasSpatialDirectPart + hasSpatialTile + A relation between the whole and one of its tiles, where the tile is only spatially connected with the other tiles forming the tessellation. @@ -1552,194 +1012,130 @@ It does not exclude the possibility of indirect causal routes between proper par Equality is here defined following a mereological approach. - - - - - - A semiotic relation connecting an icon to a interpreter (cogniser) in a cognision process. - hasCogniser - hasCogniser - A semiotic relation connecting an icon to a interpreter (cogniser) in a cognision process. + + + + + + + + + Relates a quantity to its numerical value through spatial direct parthood. + hasNumericalPart + hasNumericalPart - - - - + + + + The EMMO adheres to Atomistic General Extensional Mereology (AGEM). + The superclass of all mereological EMMO relations. + mereological + mereological + The superclass of all mereological EMMO relations. + The EMMO adheres to Atomistic General Extensional Mereology (AGEM). + + + + + - A relation connecting a sign to the interpreter in a semiotic process. - hasInterpreter - hasInterpreter - A relation connecting a sign to the interpreter in a semiotic process. + A relation that connects a semiotic object to the interpretant in a semiotic process. + hasInterpretant + hasInterpretant + A relation that connects a semiotic object to the interpretant in a semiotic process. - - - - - hasCharacterisationComponent - hasCharacterizationComponent - hasCharacterisationComponent + + + + + + Relates a dataset to its datum. + hasDatum + hasDatum + Relates a dataset to its datum. - - - - + + + + - hasComponent - hasComponent + hasStage + hasStage - - + + - + - hasInteractionVolume - hasInteractionVolume - - - - - - - The relation between a process and the entity that represents how things have turned out. - hasOutcome - hasOutcome - The relation between a process and the entity that represents how things have turned out. - - - - - - - - hasSubObject - hasSubObject - - - - - - - - Relates a quantity to its reference unit through spatial direct parthood. - hasReferencePart - hasReferencePart - Relates a quantity to its reference unit through spatial direct parthood. + hasInteractionWithSample + hasInteractionWithSample - + - - + + - hasCharacterisationEnvironment - hasCharacterizationEnvironment - hasCharacterisationEnvironment + hasMeasurementTime + hasMeasurementTime - - - - - - - hasInstrumentForCalibration - hasInstrumentForCalibration + + + + + + + + A causal relation between the y effected and the x causing entities with intermediaries, where x isCauseOf y and not(y isCauseOf x). + isPredecessorOf + isAntecedentOf + isPredecessorOf + A causal relation between the y effected and the x causing entities with intermediaries, where x isCauseOf y and not(y isCauseOf x). - - - - - - - hasSamplePreparationParameter - hasSamplePreparationParameter + + + + The generic EMMO semiotical relation. + semiotical + semiotical + The generic EMMO semiotical relation. - - - - - - hasLab - hasLab + + + + + A temporal part that is an item. + hasTemporalItemSlice + hasTemporalItemSlice + A temporal part that is an item. - - - + + - isGatheredPartOf - isGatheredPartOf + A temporal part that capture the overall spatial extension of the causal object. + hasTemporalSlice + hasTemporalSlice + A temporal part that capture the overall spatial extension of the causal object. - - - - + + + + - hasPeerReviewedArticle - hasPeerReviewedArticle - - - - - - - - - hasMeasurementSample - hasMeasurementSample - - - - - - - - A semiotic relation connecting an index sign to the interpreter (deducer) in a deduction process. - hasDeducer - hasDeducer - A semiotic relation connecting an index sign to the interpreter (deducer) in a deduction process. - - - - - - - - - hasBeginCharacterisationTask - hasBeginCharacterizationTask - hasBeginCharacterisationTask - - - - - - - - - hasMeasurementTime - hasMeasurementTime - - - - - - - - hasCharacterisationSoftware - hasCharacterizationSoftware - hasCharacterisationSoftware + hasDataAcquisitionRate + hasDataAcquisitionRate @@ -1754,52 +1150,79 @@ It does not exclude the possibility of indirect causal routes between proper par Used to correlate a user case to a characterisation procedure - - - - - - - hasLevelOfAutomation - hasLevelOfAutomation + + + + + + The relation between a process and one of its process parts. + hasSubProcess + hasSubProcess + The relation between a process and one of its process parts. - + - + + - hasMeasurementDetector - hasMeasurementDetector + hasReferenceSample + hasReferenceSample - - - - - - requiresLevelOfExpertise - requiresLevelOfExpertise + + + + + + + The relation between a object whole and its spatial part of the same type. + hasPortion + hasPortion + The relation between a object whole and its spatial part of the same type. + A volume of 1 cc of milk within a 1 litre can be considered still milk as a whole. If you scale down to a cluster of molecules, than the milk cannot be considered a fluid no more (and then no more a milk). - + + + + + The input of a process. + hasInput + hasInput + The input of a process. + + + - + - hasSampleInspectionInstrument - hasSampleInspectionInstrument + hasMeasurementProbe + hasMeasurementProbe - - - - - - The relation between two entities that overlaps and neither of both is part of the other. - properOverlaps - properOverlaps - The relation between two entities that overlaps and neither of both is part of the other. + + + + + + A semiotic relation connecting an index sign to the interpreter (deducer) in a deduction process. + hasDeducer + hasDeducer + A semiotic relation connecting an index sign to the interpreter (deducer) in a deduction process. + + + + + + + + A relation connecting a sign to the interpreter in a semiotic process. + hasInterpreter + hasInterpreter + A relation connecting a sign to the interpreter in a semiotic process. @@ -1812,25 +1235,41 @@ It does not exclude the possibility of indirect causal routes between proper par A temporal part that is a collection. - - - - - - - hasSampleBeforeSamplePreparation - hasSampleForPreparation - hasSampleBeforeSamplePreparation + + + + + + + hasScatteredPortion + hasScatteredPortion - + - - + - Relates a prefixed unit to its metric prefix part. - hasMetricPrefix - hasMetricPrefix + Relates the result of a semiotic process to ont of its optained quantities. + hasQuantity + hasQuantity + Relates the result of a semiotic process to ont of its optained quantities. + + + + + + + isGatheredPartOf + isGatheredPartOf + + + + + + + + hasVariable + hasVariable @@ -1843,4727 +1282,2588 @@ It does not exclude the possibility of indirect causal routes between proper par hasDataProcessingThroughCalibration - - - - - - hasCharacterised - hasCharacterised + + + + + + hasMaximalCollection + hasMaximalCollection - - - - - - hasStatus - hasStatus + + + + + hasMaximalPart + hasMaximalPart - - - - - - hasVariable - hasVariable + + + + + + + hasSamplePreparationInstrument + hasSamplePreparationInstrument - - - - - Assigns a quantity to an object by convention. - An object can be represented by a quantity for the fact that it has been recognized to belong to a specific class. + + + + + + A semiotic relation that connects a recognised semiotic object to an icon in a cognition process. + hasIcon + hasIcon + A semiotic relation that connects a recognised semiotic object to an icon in a cognition process. + -The quantity is selected without an observation aimed to measure its actual value, but by convention. - hasConventionalProperty - hasConventionalProperty - Assigns a quantity to an object by convention. - An Hydrogen atom has the quantity atomic number Z = 1 as its conventional property. + + + + + + + hasProcessingReproducibility + hasProcessingReproducibility - - - - Relates a SI dimensional unit to a dimension string. - hasDimensionString - hasDimensionString - Relates a SI dimensional unit to a dimension string. - - - - - - - - - The owl:dataProperty that provides a serialisation of an EMMO symbol data entity. - hasSymbolValue - hasSymbolValue - The owl:dataProperty that provides a serialisation of an EMMO symbol data entity. - - - - - - - - A string representing the Manufacturer of a CharacterisationHardware - hasManufacturer - hasManufacturer - A string representing the Manufacturer of a CharacterisationHardware - + + + + + + A semiotic relation connecting a decucing interpreter to the "deduced" semiotic object in a deduction process. + hasDeduced + hasDeduced + A semiotic relation connecting a decucing interpreter to the "deduced" semiotic object in a deduction process. + - - - - + + + + - A string representing the model of a CharacterisationHardware - hasModel - hasModel - A string representing the model of a CharacterisationHardware - + + hasCharacterisationProperty + hasCharacterizationProperty + hasCharacterisationProperty + - - - - - - The owl:dataProperty that provides a serialisation of an EMMO numerical data entity. - hasNumericalValue - hasNumericalValue - The owl:dataProperty that provides a serialisation of an EMMO numerical data entity. - + + + + isOvercrossedBy + isOvercrossedBy + - - - - - The owl:dataProperty that provides a serialisation of an EMMO data entity. - This is the superproperty of all data properties used to serialise a fundamental data type in the EMMO Data perspective. An entity can have only one data value expressing its serialisation (e.g. a Real entity cannot have two different real values). - hasDataValue - hasDataValue - The owl:dataProperty that provides a serialisation of an EMMO data entity. - This is the superproperty of all data properties used to serialise a fundamental data type in the EMMO Data perspective. An entity can have only one data value expressing its serialisation (e.g. a Real entity cannot have two different real values). - + + + + + hasCharacterisationInput + hasCharacterizationInput + hasCharacterisationInput + - - - - - hasURIValue - hasURIValue - + + + + + hasServiceOutput + hasServiceOutput + - - - - hasURNValue - hasURNValue - + + + + + hasProductOutput + hasProductOutput + - - - - - - - The owl:dataProperty that provides a serialisation of an EMMO string data entity. - hasStringValue - hasStringValue - The owl:dataProperty that provides a serialisation of an EMMO string data entity. - + + + + + + hasTask + hasTask + - - - - - - A string representing the UniqueID of a CharacterisationHardware - hasUniqueID - hasUniqueID - A string representing the UniqueID of a CharacterisationHardware - + + + + + + Assigns a quantifiable uncertainty to an objective property through a well-defined procecure. + Since measurement uncertainty is a subclass of objective property, this relation can also describe the uncertainty of an measurement uncertainty. + hasMetrologicalUncertainty + hasMetrologicalUncertainty + Assigns a quantifiable uncertainty to an objective property through a well-defined procecure. + Since measurement uncertainty is a subclass of objective property, this relation can also describe the uncertainty of an measurement uncertainty. + - - - - + + + + - hasDateOfCalibration - hasDateOfCalibration - - - - - - hasURLValue - hasURLValue - + hasMeasurementParameter + hasMeasurementParameter + - - - + + + + + Assigns a quantity to an object by convention. + An object can be represented by a quantity for the fact that it has been recognized to belong to a specific class. - - - +The quantity is selected without an observation aimed to measure its actual value, but by convention. + hasConventionalProperty + hasConventionalProperty + Assigns a quantity to an object by convention. + An Hydrogen atom has the quantity atomic number Z = 1 as its conventional property. + - + + + + + - - + notOverlaps + notOverlaps + - - - + + + + + The relation within a process and an agengt participant. + hasAgent + hasAgent + The relation within a process and an agengt participant. + - - - - + + + + + + + hasSampleInspectionParameter + hasSampleInspectionParameter + - - - - Corresponding item number in ISO 80 000. - ISO80000Reference - https://www.iso.org/obp/ui/#iso:std:iso:80000:-1:ed-1:v1:en - ISO80000Reference - Corresponding item number in ISO 80 000. - 3-1.1 (ISO80000 reference to length) - + + + + + + hasManufacturedOutput + hasManufacturedOutput + - + + + - - - URL to corresponding dpbedia entry. - dbpediaReference - https://wiki.dbpedia.org/ - dbpediaReference - URL to corresponding dpbedia entry. - + The part is connected with the rest item or members with hasNext (or its inverse) and hasContact relations only. + hasJunctionPart + hasSpatioTemporalPart + hasJunctionPart + The part is connected with the rest item or members with hasNext (or its inverse) and hasContact relations only. + - + + - - A conceptualisation is the preliminary step behind each theory, preceding each logical formalisation. The readers approaching an ontology entity should first read the conceptualisation annotation to clearly understand "what we are talking about" and the accompanying terminology, and then read the elucidation. - The conceptualisation annotation is a comment that helps the reader to understand how the world has been conceptualised by the ontology authors. - conceptualisation - conceptualisation - The conceptualisation annotation is a comment that helps the reader to understand how the world has been conceptualised by the ontology authors. - A conceptualisation is the preliminary step behind each theory, preceding each logical formalisation. The readers approaching an ontology entity should first read the conceptualisation annotation to clearly understand "what we are talking about" and the accompanying terminology, and then read the elucidation. - An elucidation can provide references to external knowledge sources (i.e. ISO, Goldbook, RoMM). - + The part is not connected with the rest item or members with hasNext (or its inverse) only or hasContact relations only. + hasHeterogeneousPart + hasHeterogeneousPart + The part is not connected with the rest item or members with hasNext (or its inverse) only or hasContact relations only. + - - - + + + + + + hasCharacterised + hasCharacterised + - - - + + + + + + + hasEndCharacterisationTask + hasEndCharacterizationTask + hasEndCharacterisationTask + - - - + + + + hasEndTask + hasEndTask + - + + + - + + hasOperator + hasOperator + - + + + + + Assigns a quantity to an object via a well-defined modelling procedure. + hasModelledProperty + hasModelledProperty + Assigns a quantity to an object via a well-defined modelling procedure. + + + + + + - + + hasPhysicsOfInteraction + hasPhysicsOfInteraction + - + + + + hasModel + hasModel + + + + + + - + + hasSampleBeforeSamplePreparation + hasSampleForPreparation + hasSampleBeforeSamplePreparation + - - - - URL for the entry in the International Electrotechnical Vocabulary (IEV). - IEVReference - https://www.electropedia.org/ - IEVReference - URL for the entry in the International Electrotechnical Vocabulary (IEV). - + + + + + + hasCollaborationWith + hasCollaborationWith + - - - - A comment can be addressed to facilitate interpretation, to suggest possible usage, to clarify the concepts behind each entity with respect to other ontological apporaches. - A text that add some information about the entity. - comment - comment - A text that add some information about the entity. - A comment can be addressed to facilitate interpretation, to suggest possible usage, to clarify the concepts behind each entity with respect to other ontological apporaches. - + + + + + + hasLab + hasLab + - + + + + + + + hasPostProcessingModel + hasPostProcessingModel + + + + - - - A link to a graphical representation aimed to facilitate understanding of the concept, or of an annotation. - figure - figure - A link to a graphical representation aimed to facilitate understanding of the concept, or of an annotation. - + isPortionPartOf + isPortionPartOf + - + + + + - - IRI to corresponding concept in the Ontology of units of Measure. - omReference - https://enterpriseintegrationlab.github.io/icity/OM/doc/index-en.html - https://github.com/HajoRijgersberg/OM - omReference - IRI to corresponding concept in the Ontology of units of Measure. - + Relates a prefixed unit to its unit symbol part. + hasUnitSymbol + hasUnitSymbol + Relates a prefixed unit to its unit symbol part. + - - - - metrologicalReference - metrologicalReference - + + + + + + hasDataset + hasDataset + - + + + + + + hasHazard + hasHazard + + + + + + - - - - The Unified Code for Units of Measure (UCUM) is a code system intended to include all units of measures being contemporarily used in international science, engineering, and business. The purpose is to facilitate unambiguous electronic communication of quantities together with their units. - Unified Code for Units of Measure (UCUM). - ucumCode - https://ucum.org/ - ucumCode - Unified Code for Units of Measure (UCUM). - The Unified Code for Units of Measure (UCUM) is a code system intended to include all units of measures being contemporarily used in international science, engineering, and business. The purpose is to facilitate unambiguous electronic communication of quantities together with their units. - + Relates a prefixed unit to its metric prefix part. + hasMetricPrefix + hasMetricPrefix + - - - - An elucidation should address the real world entities using the concepts introduced by the conceptualisation annotation. - Short enlightening explanation aimed to facilitate the user in drawing the connection (interpretation) between a OWL entity and the real world object(s) for which it stands. - elucidation - elucidation - Short enlightening explanation aimed to facilitate the user in drawing the connection (interpretation) between a OWL entity and the real world object(s) for which it stands. - An elucidation should address the real world entities using the concepts introduced by the conceptualisation annotation. - + + + + + + Relates a quantity to its reference unit through spatial direct parthood. + hasReferencePart + hasReferencePart + Relates a quantity to its reference unit through spatial direct parthood. + - - - - - URL to corresponding Wikipedia entry. - wikipediaReference - https://www.wikipedia.org/ - wikipediaReference - URL to corresponding Wikipedia entry. - - - - - - Definitions are usually taken from Wiktionary. - The etymology annotation explains the origin of a word and the historical development of its meaning. - etymology - etymology - The etymology annotation explains the origin of a word and the historical development of its meaning. - Definitions are usually taken from Wiktionary. - The etymology annotation is usually applied to rdfs:label entities, to better understand the connection between a label and the concept it concisely represents. - - - - - - ISO14040Reference - ISO14040Reference - - - + + + + - - - - - - ISO9000Reference - ISO9000Reference - - - - - - Axiom not included in the theory because of OWL 2 DL global restrictions for decidability. - OWLDLRestrictedAxiom - OWLDLRestrictedAxiom - Axiom not included in the theory because of OWL 2 DL global restrictions for decidability. - - - - - - Illustrative example of how the entity is used. - example - example - Illustrative example of how the entity is used. - - - - - - URL to corresponing entity in QUDT. - qudtReference - http://www.qudt.org/2.1/catalog/qudt-catalog.html - qudtReference - URL to corresponing entity in QUDT. - + + hasInstrumentForCalibration + hasInstrumentForCalibration + - + + + + - + + hasCharacterisationEnvironmentProperty + hasCharacterizationEnvironmentProperty + hasCharacterisationEnvironmentProperty + - + + + + - + + hasCharacterisationTask + hasCharacterizationTask + hasCharacterisationTask + - - - - - - The UN/CEFACT Recommendation 20 provides three character alphabetic and alphanumeric codes for representing units of measurement for length, area, volume/capacity, mass (weight), time, and other quantities used in international trade. The codes are intended for use in manual and/or automated systems for the exchange of information between participants in international trade. - uneceCommonCode - uneceCommonCode - The UN/CEFACT Recommendation 20 provides three character alphabetic and alphanumeric codes for representing units of measurement for length, area, volume/capacity, mass (weight), time, and other quantities used in international trade. The codes are intended for use in manual and/or automated systems for the exchange of information between participants in international trade. - + + + + + + requiresLevelOfExpertise + requiresLevelOfExpertise + - - - - - The term in the International vocabulary of metrology (VIM) (JCGM 200:2008) that corresponds to the annotated term in EMMO. - VIMTerm - https://www.bipm.org/documents/20126/2071204/JCGM_200_2012.pdf - VIMTerm - quantity value (term in VIM that corresponds to Quantity in EMMO) - The term in the International vocabulary of metrology (VIM) (JCGM 200:2008) that corresponds to the annotated term in EMMO. - + + + + + + hasCharacterisationSoftware + hasCharacterizationSoftware + hasCharacterisationSoftware + - - - + + + + + + hasSampleInspectionInstrument + hasSampleInspectionInstrument + - - - - A person or organisation acting as a contact point for enquiries about the ontology resource - The annotation should include an email address. - contact - contact - A person or organisation acting as a contact point for enquiries about the ontology resource - The annotation should include an email address. - + + + + + + A semiotic relation connecting a recognising interpreter to the "cognised" semiotic object in a cognition process. + hasCognised + hasCognised + A semiotic relation connecting a recognising interpreter to the "cognised" semiotic object in a cognition process. + - + + + + - - - DOI to corresponding concept in IUPAC - iupacReference - https://goldbook.iupac.org/ - iupacReference - - - - - + Relates a prefixed unit to its non-prefixed part. + hasUnitNonPrefixPart + hasUnitNonPrefixPart + Relates a prefixed unit to its non-prefixed part. + For example the unit CentiNewtonMetre has prefix "Centi" and non-prefix part "NewtonMetre". + - - - - A definition univocally determines a OWL entity using necessary and sufficient conditions referring to other OWL entities. - Precise and univocal description of an ontological entity in the framework of an axiomatic system. - definition - definition - Precise and univocal description of an ontological entity in the framework of an axiomatic system. - A definition univocally determines a OWL entity using necessary and sufficient conditions referring to other OWL entities. - + + + + + + hasStatus + hasStatus + - + + + + - - - - - - URL corresponding to entry in Wikidata. - wikidataReference - https://www.wikidata.org/ - wikidataReference - URL corresponding to entry in Wikidata. - + + hasMeasurementSample + hasMeasurementSample + - + + + + - + + hasInteractionWithProbe + hasInteractionWithProbe + - + + + + - + + hasPeerReviewedArticle + hasPeerReviewedArticle + - - - - + + + + + + + hasSamplePreparationParameter + hasSamplePreparationParameter + - - - + + + + + + A semiotic relation connecting a conventional sign to the interpreter (declarer) in a declaration process. + hasDeclarer + hasDeclarer + A semiotic relation connecting a conventional sign to the interpreter (declarer) in a declaration process. + - + + + + - + + hasAccessConditions + hasAccessConditions + - + + + + - + + hasCharacterisationMeasurementInstrument + hasCharacterizationMeasurementInstrument + hasCharacterisationMeasurementInstrument + - - - + + + + + + + A relation between the whole and one of its tiles, where the tile is both spatially and temporally connected with the other tiles forming the tessellation. + hasJunctionTile + hasJunctionTile + A relation between the whole and one of its tiles, where the tile is both spatially and temporally connected with the other tiles forming the tessellation. + - + + + + + + hasCharacteriser + hasCharacteriser + + + + + + + + A semiotic relation that connects a declared semiotic object to a description in a declaration process. + hasDescription + hasDescription + A semiotic relation that connects a declared semiotic object to a description in a declaration process. + + + + + + + + A semiotic relation connecting an icon to a interpreter (cogniser) in a cognision process. + hasCogniser + hasCogniser + A semiotic relation connecting an icon to a interpreter (cogniser) in a cognision process. + + + + - + + hasCharacterisationOutput + hasCharacterizationOutput + hasCharacterisationOutput + - + + + + - + + hasLevelOfAutomation + hasLevelOfAutomation + - + + + + - + + hasCharacterisationProcedureValidation + hasCharacterisationProcedureValidation + - + + + + Relates a SI dimensional unit to a dimension string. + hasDimensionString + hasDimensionString + Relates a SI dimensional unit to a dimension string. + + + + + + - + A string representing the model of a CharacterisationHardware + hasModel + hasModel + A string representing the model of a CharacterisationHardware + - - - - - - - 2 - - - - A collection is the concept that complements the item concept, being an entity that possesses at least one part non directly causally connected with the rest. -A collection can be partitioned in maximally connected items called members. The members are self-connected entities and there is no direct causality relation between them. -The combination of collection and item concepts is the EMMO mereocausality alternative to set theory. However, two items can be members only if they are non direct causally connected, giving some constraints to a collection definition. For example, two entities which are directly connected cannot be two distinct members, while their interiors (i.e. the entities obtained by removing the layer of parts that provides the causal contact between them) can be. - The class of not direct causally self-connected world entities. - Collection - Collection - A collection is the concept that complements the item concept, being an entity that possesses at least one part non directly causally connected with the rest. -A collection can be partitioned in maximally connected items called members. The members are self-connected entities and there is no direct causality relation between them. -The combination of collection and item concepts is the EMMO mereocausality alternative to set theory. However, two items can be members only if they are non direct causally connected, giving some constraints to a collection definition. For example, two entities which are directly connected cannot be two distinct members, while their interiors (i.e. the entities obtained by removing the layer of parts that provides the causal contact between them) can be. - The class of not direct causally self-connected world entities. - The collection of users of a particular software, the collection of atoms that have been part of that just dissociated molecule. - + + + + + + + The owl:dataProperty that provides a serialisation of an EMMO string data entity. + hasStringValue + hasStringValue + The owl:dataProperty that provides a serialisation of an EMMO string data entity. + - - - - imaginary part of the admittance - Susceptance - Susceptance - https://qudt.org/vocab/quantitykind/Susceptance - https://www.wikidata.org/wiki/Q509598 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-54 - 6-52.3 - imaginary part of the admittance - + + + + + The owl:dataProperty that provides a serialisation of an EMMO data entity. + This is the superproperty of all data properties used to serialise a fundamental data type in the EMMO Data perspective. An entity can have only one data value expressing its serialisation (e.g. a Real entity cannot have two different real values). + hasDataValue + hasDataValue + The owl:dataProperty that provides a serialisation of an EMMO data entity. + This is the superproperty of all data properties used to serialise a fundamental data type in the EMMO Data perspective. An entity can have only one data value expressing its serialisation (e.g. a Real entity cannot have two different real values). + - - - - - - - - - - - - - - Inverse of 'ElectricalResistance'. - Measure of the ease for electric current to pass through a material. - ElectricConductance - Conductance - ElectricConductance - http://qudt.org/vocab/quantitykind/Conductance - https://www.wikidata.org/wiki/Q309017 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-06 - 6-47 - Measure of the ease for electric current to pass through a material. - https://doi.org/10.1351/goldbook.E01925 - + + + + + + A string representing the Manufacturer of a CharacterisationHardware + hasManufacturer + hasManufacturer + A string representing the Manufacturer of a CharacterisationHardware + - - - - - - - - - - - - - - - - - - - - A continuum that has no fixed shape and yields easily to external pressure. - Fluid - Fluid - A continuum that has no fixed shape and yields easily to external pressure. - Gas, liquid, plasma, - + + + + + + + hasDateOfCalibration + hasDateOfCalibration + - - - - A continuum is made of a sufficient number of parts that it continues to exists as continuum individual even after the loss of one of them i.e. a continuum is a redundant. - A state that is a collection of sufficiently large number of other parts such that: -- it is the bearer of qualities that can exists only by the fact that it is a sum of parts -- the smallest partition dV of the state volume in which we are interested in, contains enough parts to be statistically consistent: n [#/m3] x dV [m3] >> 1 - ContinuumSubstance - ContinuumSubstance - A state that is a collection of sufficiently large number of other parts such that: -- it is the bearer of qualities that can exists only by the fact that it is a sum of parts -- the smallest partition dV of the state volume in which we are interested in, contains enough parts to be statistically consistent: n [#/m3] x dV [m3] >> 1 - A continuum is made of a sufficient number of parts that it continues to exists as continuum individual even after the loss of one of them i.e. a continuum is a redundant. - A continuum is not necessarily small (i.e. composed by the minimum amount of sates to fulfill the definition). - -A single continuum individual can be the whole fluid in a pipe. - A continuum is the bearer of properties that are generated by the interactions of parts such as viscosity and thermal or electrical conductivity. - - - - - - - - - - - - - - - Differential quotient of fluence Φ with respect to time. - ParticleFluenceRate - ParticleFluenceRate - https://qudt.org/vocab/quantitykind/ParticleFluenceRate - https://www.wikidata.org/wiki/Q98497410 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-16 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-04-19 - 10-44 - Differential quotient of fluence Φ with respect to time. - - - - - - - Derived quantities defined in the International System of Quantities (ISQ). - ISQDerivedQuantity - ISQDerivedQuantity - Derived quantities defined in the International System of Quantities (ISQ). - - - - - - Quantities categorised according to ISO 80000-10. - AtomicAndNuclearPhysicsQuantity - AtomicAndNuclearPhysicsQuantity - Quantities categorised according to ISO 80000-10. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - EMMO entities dimensionality is related to their mereocausal structures. From the no-dimensional quantum entity, we introduce time dimension with the elementary concept, and the spacetime with the causal system concept. -The EMMO conceptualisation does not allow the existence of space without a temporal dimension, the latter coming from a causal relation between entities. -For this reason, the EMMO entities that are not quantum or elementaries, may be considered to be always spatiotemporal. The EMMO poses no constraints to the number of spatial dimensions for a causal system (except being higher than one). - The EMMO conceptualises the world using the primitive concepts of causality and parthood. Parthood is about the composition of world entities starting from other more fundamental entities. Causality is about the interactions between world entities. -The quantum is the smallest indivisible part of any world entity. Quantum individuals are the fundamental causal constituents of the universe, since it is implied that causality originates from quantum-to-quantum interactions. Quantums are no-dimensional, and their aggregation makes spacetime emerge from their causal structure. Causality between macro entities (i.e. entities made of more than one quantum) is explained as the sum of the causality relations between their quantum constituents. -The fundamental distinction between world entities is direct causality self-connectedness: a world entity can be self-connected xor not self-connected depending on the causality network of its fundamental components. -Void regions do not exist in the EMMO, or in other words there is no spacetime without entities, since space and time are measured quantities following a causality relation between entities (spacetime emerges as relational property not as a self-standing entity). -Entities are not placed in space or time: space and time are always relative between entities and are measured. In other words, space and time relations originates from causality interactions. - The class of all the OWL individuals declared by EMMO as standing for world entities. - The disjoint union of the Item and Collection classes. - EMMO - EMMO - The EMMO conceptualises the world using the primitive concepts of causality and parthood. Parthood is about the composition of world entities starting from other more fundamental entities. Causality is about the interactions between world entities. -The quantum is the smallest indivisible part of any world entity. Quantum individuals are the fundamental causal constituents of the universe, since it is implied that causality originates from quantum-to-quantum interactions. Quantums are no-dimensional, and their aggregation makes spacetime emerge from their causal structure. Causality between macro entities (i.e. entities made of more than one quantum) is explained as the sum of the causality relations between their quantum constituents. -The fundamental distinction between world entities is direct causality self-connectedness: a world entity can be self-connected xor not self-connected depending on the causality network of its fundamental components. -Void regions do not exist in the EMMO, or in other words there is no spacetime without entities, since space and time are measured quantities following a causality relation between entities (spacetime emerges as relational property not as a self-standing entity). -Entities are not placed in space or time: space and time are always relative between entities and are measured. In other words, space and time relations originates from causality interactions. - The disjoint union of the Item and Collection classes. - The class of all the OWL individuals declared by EMMO as standing for world entities. - EMMO entities dimensionality is related to their mereocausal structures. From the no-dimensional quantum entity, we introduce time dimension with the elementary concept, and the spacetime with the causal system concept. -The EMMO conceptualisation does not allow the existence of space without a temporal dimension, the latter coming from a causal relation between entities. -For this reason, the EMMO entities that are not quantum or elementaries, may be considered to be always spatiotemporal. The EMMO poses no constraints to the number of spatial dimensions for a causal system (except being higher than one). - - - - - - A semantic object that is connected to a conventional sign by an interpreter (a declarer) according to a specific convention. - Declared - Declared - A semantic object that is connected to a conventional sign by an interpreter (a declarer) according to a specific convention. - - - - - - - Efficiency of an ideal heat engine operating according to the Carnot process. - MaximumEfficiency - CarnotEfficiency - MaximumEfficiency - https://www.wikidata.org/wiki/Q93949862 - 5-25.2 - Efficiency of an ideal heat engine operating according to the Carnot process. - - - - - - - - - - - - - - A quantity to which no physical dimension is assigned and with a corresponding unit of measurement in the SI of the unit one. - ISQDimensionlessQuantity - ISQDimensionlessQuantity - http://qudt.org/vocab/quantitykind/Dimensionless - A quantity to which no physical dimension is assigned and with a corresponding unit of measurement in the SI of the unit one. - https://en.wikipedia.org/wiki/Dimensionless_quantity - https://doi.org/10.1351/goldbook.D01742 - - - - - - Quantities categorised according to ISO 80000-5. - ThermodynamicalQuantity - ThermodynamicalQuantity - Quantities categorised according to ISO 80000-5. - - - - - - - GreenStrangeQuark - GreenStrangeQuark - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - A causal chain is an ordered causal sequence of entities that does not host any bifurcation within itself (a chain). A chain can only be partitioned in time. - The class of entities that possess a temporal structure but no spatial structure. - CausalPath - CausalChain - Elementary - CausalPath - A causal chain is an ordered causal sequence of entities that does not host any bifurcation within itself (a chain). A chain can only be partitioned in time. - The class of entities that possess a temporal structure but no spatial structure. - An electron with at least one causal interaction with another particle. - hasTemporalPart min 2 (Elementary or Quantum) - - - - - - - T0 L+1 M0 I0 Θ-1 N0 J0 - - - - - LengthPerTemperatureUnit - LengthPerTemperatureUnit - - - - - - Dimensional unit with its physical dimensionality described accortind to the International System of Units (SI). - In SI are the physical dimensions of the base quantities time (T), length (L), mass (M), electric current (I), thermodynamic temperature (Θ), amount of substance (N) and luminous intensity (J). - -In general the dimension of any quantity Q is written in the form of a dimensional product, - - dim Q = T^α L^β M^γ I^δ Θ^ε N^ζ J^η - -where the exponents α, β, γ, δ, ε, ζ and η, which are generally small integers, which can be positive, negative, or zero, are called the dimensional exponents. --- SI brouchure - -The SI dimensional units are equivalent to dimensional strings that uniquely defines their dimensionality by specifying the values of the coefficients α, β, γ, δ, ε, ζ and η. A dimensional string is a space-separated string of the physical dimension symbols followed by the value of the exponent (including it sign). They should always match the following regular expression: - -^T([+-][1-9]|0) L([+-][1-9]|0) M([+-][1-9]|0) I([+-][1-9]|0) Θ([+-][1-9]|0) N([+-][1-9]|0) J([+-][1-9]|0)$ - -Examples of correspondance between dimensional units and their dimensional units are: - -- AmountOfSubstanceUnit <=> "T0 L0 M0 I0 Θ0 N+1 J0" -- TimeUnit <=> "T+1 L0 M0 I0 Θ0 N0 J0" -- ElectricCurrentDensityUnit <=> "T0 L-2 M0 I+1 Θ0 N0 J0" - SIDimensionalUnit - SIDimensionalUnit - Dimensional unit with its physical dimensionality described accortind to the International System of Units (SI). - In SI are the physical dimensions of the base quantities time (T), length (L), mass (M), electric current (I), thermodynamic temperature (Θ), amount of substance (N) and luminous intensity (J). - -In general the dimension of any quantity Q is written in the form of a dimensional product, - - dim Q = T^α L^β M^γ I^δ Θ^ε N^ζ J^η - -where the exponents α, β, γ, δ, ε, ζ and η, which are generally small integers, which can be positive, negative, or zero, are called the dimensional exponents. --- SI brouchure - -The SI dimensional units are equivalent to dimensional strings that uniquely defines their dimensionality by specifying the values of the coefficients α, β, γ, δ, ε, ζ and η. A dimensional string is a space-separated string of the physical dimension symbols followed by the value of the exponent (including it sign). They should always match the following regular expression: - -^T([+-][1-9]|0) L([+-][1-9]|0) M([+-][1-9]|0) I([+-][1-9]|0) Θ([+-][1-9]|0) N([+-][1-9]|0) J([+-][1-9]|0)$ - -Examples of correspondance between dimensional units and their dimensional units are: - -- AmountOfSubstanceUnit <=> "T0 L0 M0 I0 Θ0 N+1 J0" -- TimeUnit <=> "T+1 L0 M0 I0 Θ0 N0 J0" -- ElectricCurrentDensityUnit <=> "T0 L-2 M0 I+1 Θ0 N0 J0" - - - - - - Nailing is joining by hammering or pressing nails (wire pins) as auxiliary parts into the solid material. Several parts are joined by pressing them together (from: DIN 8593 part 3/09.85). - Nailing - Nageln - Nailing - - - - - - A collective term for the processes in which, during joining, the parts to be joined and any auxiliary parts are essentially only elastically deformed and unintentional loosening is prevented by frictional connection. - Pressing - Anpressen - Pressing - - - - - - - Faction of electrical current carried by given ionic species. - IonTransportNumber - CurrentFraction - TransferrenceNumber - IonTransportNumber - https://qudt.org/vocab/quantitykind/IonTransportNumber - https://www.wikidata.org/wiki/Q331854 - 9-46 - Faction of electrical current carried by given ionic species. - https://doi.org/10.1351/goldbook.I03181 - https://doi.org/10.1351/goldbook.T06489 - - - - - - Quantities categorised according to ISO 80000-9. - PhysioChemicalQuantity - PhysioChemicalQuantity - Quantities categorised according to ISO 80000-9. - - - - - - Quantities defined as ratios `Q=A/B` having equal dimensions in numerator and denominator are dimensionless quantities but still have a physical dimension defined as dim(A)/dim(B). - -Johansson, Ingvar (2010). "Metrological thinking needs the notions of parametric quantities, units and dimensions". Metrologia. 47 (3): 219–230. doi:10.1088/0026-1394/47/3/012. ISSN 0026-1394. - The class of quantities that are the ratio of two quantities with the same physical dimensionality. - RatioQuantity - https://iopscience.iop.org/article/10.1088/0026-1394/47/3/012 - RatioQuantity - http://qudt.org/vocab/quantitykind/DimensionlessRatio - The class of quantities that are the ratio of two quantities with the same physical dimensionality. - refractive index, -volume fraction, -fine structure constant - - - - - - - - - 1 - - - - An Internationalized Resource Identifier (IRI) is a compact sequence of characters that identifies an abstract or physical resource. It is similar to URI, but greatly extends the allowed character set from ASCII to the Universal Character Set. - IRIs are commonly used as identifiers for ontological entities, although the extended unicode character set is rarely used. - IRI - IRI - An Internationalized Resource Identifier (IRI) is a compact sequence of characters that identifies an abstract or physical resource. It is similar to URI, but greatly extends the allowed character set from ASCII to the Universal Character Set. - https://en.wiktionary.org/wiki/Ῥόδος - IRIs are commonly used as identifiers for ontological entities, although the extended unicode character set is rarely used. - https://en.wikipedia.org/wiki/Internationalized_Resource_Identifier - - - - - - - - - - - - - - - - A formal computer-interpretable identifier of a system resource. - ResourceIdentifier - ResourceIdentifier - A formal computer-interpretable identifier of a system resource. - - - - - - Atomic quantum number related to the number n−1 of radial nodes of one-electron wave functions. - PrincipalQuantumNumber - PrincipalQuantumNumber - https://qudt.org/vocab/quantitykind/PrincipalQuantumNumber - https://www.wikidata.org/wiki/Q867448 - 10-13.2 - Atomic quantum number related to the number n−1 of radial nodes of one-electron wave functions. - - - - - - - Number describing a particular state of a quantum system. - QuantumNumber - QuantumNumber - https://qudt.org/vocab/quantitykind/QuantumNumber - https://www.wikidata.org/wiki/Q232431 - 10-13.1 - Number describing a particular state of a quantum system. - - - - - - Portion of material selected from a larger quantity of material. The term needs to be qualified, e.g., bulk sample, representative sample, primary sample, bulked sample, test sample, etc. The term 'sample' implies the existence of a sampling error, i.e., the results obtained on the portions taken are only estimates of the concentration of a constituent or the quantity of a property present in the parent material. If there is no or negligible sampling error, the portion removed is a test portion, aliquot, or specimen. - - Sample and Specime are often used interchangeably. However in some cases the term Specimen is used to specify a portion taken under conditions such that the sampling variability cannot be assessed (usually because the population is changing), and is assumed, for convenience, to be zero. - Sample - Specimen - Sample - Portion of material selected from a larger quantity of material. The term needs to be qualified, e.g., bulk sample, representative sample, primary sample, bulked sample, test sample, etc. The term 'sample' implies the existence of a sampling error, i.e., the results obtained on the portions taken are only estimates of the concentration of a constituent or the quantity of a property present in the parent material. If there is no or negligible sampling error, the portion removed is a test portion, aliquot, or specimen. - Sample and Specime are often used interchangeably. However in some cases the term Specimen is used to specify a portion taken under conditions such that the sampling variability cannot be assessed (usually because the population is changing), and is assumed, for convenience, to be zero. - - - - - - A continuant (here called object) is usually defined as a whole whose all possible temporal parts are always satisfying a specific criterion (wich is the classical definition of continuants). -However that's not possible in general, since we will finally end to temporal parts whose temporal extension is so small that the connectivity relations that define the object will no longer hold. That's the case when the temporal interval is lower than the interval that characterize the causality interactions between the object parts. -In other terms, if the time span of a temporal part is lower than the inverse of the frequency of interactions between the constituents, then the constituents in such temporal part are not connected. The object is no more an object, neither an item, but simply a collection of fundamental parts. -To overcome this issue, we can identify an minimum holistic temporal part (a lower time interval value), below which a specific definition for an object type does not hold anymore, that is called a fundamental. - A whole that is identified according to a criteria based on its spatial configuration that is satisfied throughout its time extension. - Object - Continuant - Endurant - Object - A whole that is identified according to a criteria based on its spatial configuration that is satisfied throughout its time extension. - - - - - - - BlueDownAntiQuark - BlueDownAntiQuark - - - - - - - - - - - - - - - - Extent of an object in space. - Volume - Volume - http://qudt.org/vocab/quantitykind/Volume - https://www.wikidata.org/wiki/Q39297 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=102-04-40 - https://dbpedia.org/page/Volume - 3-4 - - - - - - - A quantity whose magnitude is additive for subsystems. - Note that not all physical quantities can be categorised as being either intensive or extensive. For example the square root of the mass. - Extensive - Extensive - A quantity whose magnitude is additive for subsystems. - Mass -Volume -Entropy - - - - - - Quantities categorised according to ISO 80000-3. - SpaceAndTimeQuantity - SpaceAndTimeQuantity - Quantities categorised according to ISO 80000-3. - - - - - - A whole with spatial parts of its same type. - SpatiallyRedundant - SpatiallyRedundant - A whole with spatial parts of its same type. - - - - - - Ion mobility spectrometry (IMS) It is a method of conducting analytical research that separates and identifies ionized molecules present in the gas phase based on the mobility of the molecules in a carrier buffer gas. Even though it is used extensively for military or security objectives, such as detecting drugs and explosives, the technology also has many applications in laboratory analysis, including studying small and big biomolecules. IMS instruments are extremely sensitive stand-alone devices, but are often coupled with mass spectrometry, gas chromatography or high-performance liquid chromatography in order to achieve a multi-dimensional separation. They come in various sizes, ranging from a few millimeters to several meters depending on the specific application, and are capable of operating under a broad range of conditions. IMS instruments such as microscale high-field asymmetric-waveform ion mobility spectrometry can be palm-portable for use in a range of applications including volatile organic compound (VOC) monitoring, biological sample analysis, medical diagnosis and food quality monitoring. - - IonMobilitySpectrometry - IMS - IonMobilitySpectrometry - Ion mobility spectrometry (IMS) It is a method of conducting analytical research that separates and identifies ionized molecules present in the gas phase based on the mobility of the molecules in a carrier buffer gas. Even though it is used extensively for military or security objectives, such as detecting drugs and explosives, the technology also has many applications in laboratory analysis, including studying small and big biomolecules. IMS instruments are extremely sensitive stand-alone devices, but are often coupled with mass spectrometry, gas chromatography or high-performance liquid chromatography in order to achieve a multi-dimensional separation. They come in various sizes, ranging from a few millimeters to several meters depending on the specific application, and are capable of operating under a broad range of conditions. IMS instruments such as microscale high-field asymmetric-waveform ion mobility spectrometry can be palm-portable for use in a range of applications including volatile organic compound (VOC) monitoring, biological sample analysis, medical diagnosis and food quality monitoring. - - - - - - Spectroscopic techniques are numerous and varied, but all involve measuring the response of a material to different frequencies of electromagnetic radiation. Depending on the technique used, material characterization may be based on the absorption, emission, impedance, or reflection of incident energy by a sample. - - Spectrometry - Spectrometry - Spectroscopic techniques are numerous and varied, but all involve measuring the response of a material to different frequencies of electromagnetic radiation. Depending on the technique used, material characterization may be based on the absorption, emission, impedance, or reflection of incident energy by a sample. - - - - - - The creep test is a destructive materials testing method for determination of the long-term strength and heat resistance of a material. When running a creep test, the specimen is subjected to increased temperature conditions for an extended period of time and loaded with a constant tensile force or tensile stress. - - CreepTesting - CreepTesting - The creep test is a destructive materials testing method for determination of the long-term strength and heat resistance of a material. When running a creep test, the specimen is subjected to increased temperature conditions for an extended period of time and loaded with a constant tensile force or tensile stress. - - - - - - - - - - - - - - - - - - A composite particle is a bound state of elementary particles for which it is still possible to define its bosonic or fermionic behaviour. - CompositePhysicalParticle - CompositePhysicalParticle - A composite particle is a bound state of elementary particles for which it is still possible to define its bosonic or fermionic behaviour. - - - - - - - T-3 L+3 M+1 I-2 Θ0 N0 J0 - - - - - ElectricResistivityUnit - ElectricResistivityUnit - - - - - - Mechanical testing covers a wide range of tests, which can be divided broadly into two types: -1. those that aim to determine a material's mechanical properties, independent of geometry. -2. those that determine the response of a structure to a given action, e.g. testing of composite beams, aircraft structures to destruction, etc. - - MechanicalTesting - MechanicalTesting - Mechanical testing covers a wide range of tests, which can be divided broadly into two types: -1. those that aim to determine a material's mechanical properties, independent of geometry. -2. those that determine the response of a structure to a given action, e.g. testing of composite beams, aircraft structures to destruction, etc. - https://en.wikipedia.org/wiki/Mechanical_testing - - - - - - - T0 L+3 M0 I0 Θ0 N-1 J0 - - - - - VolumePerAmountUnit - VolumePerAmountUnit - - - - - - - - - - - - - - - - - - - - - - A matter entity exclude the presence of (real) fundamental bosons parts. However, it implies the presence of virtual bosons that are responsible of the interactions between the (real) fundamental fermions. - A physical object made of fermionic quantum parts. - The interpretation of the term "matter" is not univocal. Several concepts are labelled with this term, depending on the field of science. The concept mass is sometimes related to the term "matter", even if the former refers to a physical quantity (precisely defined by modern physics) while the latter is a type that qualifies a physical entity. -It is possible to identify more than one concept that can be reasonably labelled with the term "matter". For example, it is possible to label as matter only the entities that are made up of atoms. Or more generally, we can be more fine-grained and call "matter" the entities that are made up of protons, neutrons or electrons, so that we can call matter also a neutron radiation or a cathode ray. -A more fundamental approach, that we embrace for the EMMO, considers matter as entities that are made of fermions (i.e. quarks and leptons). This would exclude particles like the W and Z bosons that possess some mass, but are not fermions. -Antimatter is a subclass of matter. - Matter - PhysicalSubstance - Matter - The interpretation of the term "matter" is not univocal. Several concepts are labelled with this term, depending on the field of science. The concept mass is sometimes related to the term "matter", even if the former refers to a physical quantity (precisely defined by modern physics) while the latter is a type that qualifies a physical entity. -It is possible to identify more than one concept that can be reasonably labelled with the term "matter". For example, it is possible to label as matter only the entities that are made up of atoms. Or more generally, we can be more fine-grained and call "matter" the entities that are made up of protons, neutrons or electrons, so that we can call matter also a neutron radiation or a cathode ray. -A more fundamental approach, that we embrace for the EMMO, considers matter as entities that are made of fermions (i.e. quarks and leptons). This would exclude particles like the W and Z bosons that possess some mass, but are not fermions. -Antimatter is a subclass of matter. - A physical object made of fermionic quantum parts. - A matter entity exclude the presence of (real) fundamental bosons parts. However, it implies the presence of virtual bosons that are responsible of the interactions between the (real) fundamental fermions. - Matter includes ordinary- and anti-matter. It is possible to have entities that are made of particle and anti-particles (e.g. mesons made of a quark and an anti-quark pair) so that it is possible to have entities that are somewhat heterogeneous with regards to this distinction. - - - - - - - - - - - - - - - - - A CausalSystem whose quantum parts are all bonded to the rest of the system. - It is natural to define entities made or more than one smaller parts according to some unity criteria. One of the most general one applicable to causal systems is to ask that all the quantum parts of the system are bonded to the rest. -In other words, causal convexity excludes all quantums that leave the system (no more interacting), or that are not yet part of it (not yet interacting). -So, a photon leaving a body is not part of the body as convex system, while a photon the is carrier of electromagnetic interaction between two molecular parts of the body, is part of the convex body. - PhysicalObject - PhysicalObject - A CausalSystem whose quantum parts are all bonded to the rest of the system. - It is natural to define entities made or more than one smaller parts according to some unity criteria. One of the most general one applicable to causal systems is to ask that all the quantum parts of the system are bonded to the rest. -In other words, causal convexity excludes all quantums that leave the system (no more interacting), or that are not yet part of it (not yet interacting). -So, a photon leaving a body is not part of the body as convex system, while a photon the is carrier of electromagnetic interaction between two molecular parts of the body, is part of the convex body. - - - - - - - Internal energy per amount of substance. - MolarInternalEnergy - MolarInternalEnergy - https://www.wikidata.org/wiki/Q88523106 - 9-6.1 - Internal energy per amount of substance. - - - - - - - - - - - - - - Energy per amount of substance. - MolarEnergy - MolarEnergy - https://qudt.org/vocab/quantitykind/MolarEnergy - https://www.wikidata.org/wiki/Q69427512 - Energy per amount of substance. - - - - - - - - - - - - - - - The derivative of the electric charge of a system with respect to the length. - LinearDensityOfElectricCharge - LinearDensityOfElectricCharge - https://www.wikidata.org/wiki/Q77267838 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-09 - 6-5 - The derivative of the electric charge of a system with respect to the length. - - - - - - Quantities categorised according to ISO 80000-6. - ElectromagneticQuantity - ElectromagneticQuantity - Quantities categorised according to ISO 80000-6. - - - - - - The scanning electron microscope (SEM) uses a focused beam of high-energy electrons to generate a variety of signals at the surface of solid specimens. The signals that derive from electron-sample interactions reveal information about the sample including external morphology (texture), chemical composition, and crystalline structure and orientation of materials making up the sample. - - ScanningElectronMicroscopy - SEM - ScanningElectronMicroscopy - The scanning electron microscope (SEM) uses a focused beam of high-energy electrons to generate a variety of signals at the surface of solid specimens. The signals that derive from electron-sample interactions reveal information about the sample including external morphology (texture), chemical composition, and crystalline structure and orientation of materials making up the sample. - - - - - - Microscopy is a category of characterization techniques which probe and map the surface and sub-surface structure of a material. These techniques can use photons, electrons, ions or physical cantilever probes to gather data about a sample's structure on a range of length scales. - - Microscopy - Microscopy - Microscopy is a category of characterization techniques which probe and map the surface and sub-surface structure of a material. These techniques can use photons, electrons, ions or physical cantilever probes to gather data about a sample's structure on a range of length scales. - - - - - - - T+1 L0 M0 I0 Θ0 N0 J0 - - - - - TimeUnit - TimeUnit - - - - - - - The rest mass of a proton. - ProtonMass - ProtonMass - http://qudt.org/vocab/constant/ProtonMass - https://doi.org/10.1351/goldbook.P04914 - - - - - - For a given unit system, measured constants are physical constants that are not used to define the unit system. Hence, these constants have to be measured and will therefore be associated with an uncertainty. - MeasuredConstant - MeasuredConstant - For a given unit system, measured constants are physical constants that are not used to define the unit system. Hence, these constants have to be measured and will therefore be associated with an uncertainty. - - - - - - - - - - - - - - - - - - - - - - - - - - Property of a physical body that express its resistance to acceleration (a change in its state of motion) when a force is applied. - Mass - Mass - http://qudt.org/vocab/quantitykind/Mass - 4-1 - Property of a physical body that express its resistance to acceleration (a change in its state of motion) when a force is applied. - https://doi.org/10.1351/goldbook.M03709 - - - - - - - average distance that phonons travel between two successive interactions - MeanFreePathOfPhonons - MeanFreePathOfPhonons - https://qudt.org/vocab/quantitykind/PhononMeanFreePath - https://www.wikidata.org/wiki/Q105672255 - 12-15.1 - average distance that phonons travel between two successive interactions - - - - - - - The mean free path may thus be specified either for all interactions, i.e. total mean free path, or for particular types of interaction such as scattering, capture, or ionization. - in a given medium, average distance that particles of a specified type travel between successive interactions of a specified type. - MeanFreePath - MeanFreePath - https://qudt.org/vocab/quantitykind/MeanFreePath - https://www.wikidata.org/wiki/Q756307 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-06-37 - 9-38 - in a given medium, average distance that particles of a specified type travel between successive interactions of a specified type. - https://doi.org/10.1351/goldbook.M03778 - - - - - - Quantities categorised according to ISO 80000-12. - CondensedMatterPhysicsQuantity - CondensedMatterPhysicsQuantity - Quantities categorised according to ISO 80000-12. - - - - - - - BlueCharmQuark - BlueCharmQuark - - - - - - - - - - - - - - - - - - - - - - - CharmQuark - CharmQuark - https://en.wikipedia.org/wiki/Charm_quark - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - BlueQuark - BlueQuark - - - - - - - - - - - - - - - - - A standalone atom can be bonded with other atoms by intermolecular forces (i.e. dipole–dipole, London dispersion force, hydrogen bonding), since this bonds does not involve electron sharing. - An atom that does not share electrons with other atoms. - StandaloneAtom - StandaloneAtom - An atom that does not share electrons with other atoms. - - - - - - - - - - - - - - - - - - A standalone atom has direct part one 'nucleus' and one 'electron_cloud'. - -An O 'atom' within an O₂ 'molecule' is an 'e-bonded_atom'. - -In this material branch, H atom is a particular case, with respect to higher atomic number atoms, since as soon as it shares its electron it has no nucleus entangled electron cloud. - -We cannot say that H₂ molecule has direct part two H atoms, but has direct part two H nucleus. - An 'atom' is a 'nucleus' surrounded by an 'electron_cloud', i.e. a quantum system made of one or more bounded electrons. - Atom - ChemicalElement - Atom - A standalone atom has direct part one 'nucleus' and one 'electron_cloud'. - -An O 'atom' within an O₂ 'molecule' is an 'e-bonded_atom'. - -In this material branch, H atom is a particular case, with respect to higher atomic number atoms, since as soon as it shares its electron it has no nucleus entangled electron cloud. - -We cannot say that H₂ molecule has direct part two H atoms, but has direct part two H nucleus. - An 'atom' is a 'nucleus' surrounded by an 'electron_cloud', i.e. a quantum system made of one or more bounded electrons. - - - - - - - - + - - - - Plus - Plus - - - - - - ArithmeticOperator - ArithmeticOperator - - - - - - - A workflow whose tasks are tiles of a sequence. - SerialWorkflow - SerialWorkflow - A workflow whose tasks are tiles of a sequence. - - - - - - - - - - - - - - - - - - - - - - - A procedure that has at least two procedures (tasks) as proper parts. - Workflow - Workflow - A procedure that has at least two procedures (tasks) as proper parts. - - - - - - A tessellation of temporal slices. - Sequence - Sequence - A tessellation of temporal slices. - - - - - - - Dimensionless parameter to quantify fluid resistance. - DragCoefficient - DragFactor - DragCoefficient - https://qudt.org/vocab/quantitykind/DragCoefficient - https://www.wikidata.org/wiki/Q1778961 - 4-23.4 - Dimensionless parameter to quantify fluid resistance. - - - - - - Quantities categorised according to ISO 80000-4. - MechanicalQuantity - MechanicalQuantity - Quantities categorised according to ISO 80000-4. - - - - - - - - - - - - - - - - - - - - - - - - - - A 'Semiosis' that involves an 'Observer' that perceives another 'Physical' (the 'Object') through a specific perception mechanism and produces a 'Property' (the 'Sign') that stands for the result of that particular perception according to a well defined conventional procedure. - Determination - Characterisation - Determination - A 'Semiosis' that involves an 'Observer' that perceives another 'Physical' (the 'Object') through a specific perception mechanism and produces a 'Property' (the 'Sign') that stands for the result of that particular perception according to a well defined conventional procedure. - Assigning the word "red" as sign for an object provides an information to all other interpreters about the outcome of a specific observation procedure according to the determiner. - - - - - - Electronic device capable of processing data, typically in binary form, according to instructions given to it in a variable program. - ComputerSystem - Computer - ComputerSystem - Electronic device capable of processing data, typically in binary form, according to instructions given to it in a variable program. - https://en.wikipedia.org/wiki/Computer - - - - - - Analytical electron microscopy (AEM) refers to the collection of spectroscopic data in TEM or STEM, enabling qualitative or quantitative compositional analysis. - - AnalyticalElectronMicroscopy - AnalyticalElectronMicroscopy - Analytical electron microscopy (AEM) refers to the collection of spectroscopic data in TEM or STEM, enabling qualitative or quantitative compositional analysis. - - - - - - - Work function is the energy difference between an electron at rest at infinity and an electron at the Fermi level in the interior of a substance. - least energy required for the emission of a conduction electron. - WorkFunction - ElectronWorkFunction - WorkFunction - https://www.wikidata.org/wiki/Q783800 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-06-35 - 12-24.1 - least energy required for the emission of a conduction electron. - https://doi.org/10.1351/goldbook.E02015 - - - - - - - - - - - - - - - A property of objects which can be transferred to other objects or converted into different forms. - Energy is often defined as "ability of a system to perform work", but it might be misleading since is not necessarily available to do work. - Energy - Energy - http://qudt.org/vocab/quantitykind/Energy - 5-20-1 - A property of objects which can be transferred to other objects or converted into different forms. - https://doi.org/10.1351/goldbook.E02101 - - - - - - - - - - - - - - - - - - - - - - - DownAntiQuark - DownAntiQuark - - - - - - - - - - - - - - - - - - - - FirstGenerationFermion - FirstGenerationFermion - - - - - - - - - - - - - - - - - - - - - - DownAntiQuarkType - DownAntiQuarkType - - - - - - - T-2 L+2 M+1 I0 Θ0 N-1 J0 - - - - - EnergyPerAmountUnit - EnergyPerAmountUnit - - - - - - - E_0 = m_0 * c_0^2 - -where m_0 is the rest mass of that particle and c_0 is the speed of light in a vacuum. - Product of the rest mass and the square of the speed of light in vacuum. - RestEnergy - RestEnergy - https://www.wikidata.org/wiki/Q11663629 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-05 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-04-17 - 10-3 - Product of the rest mass and the square of the speed of light in vacuum. - E_0 = m_0 * c_0^2 - -where m_0 is the rest mass of that particle and c_0 is the speed of light in a vacuum. - https://en.wikipedia.org/wiki/Invariant_mass#Rest_energy - - - - - - Differential thermal analysis (DTA) is a thermoanalytic technique that is similar to differential scanning calorimetry. In DTA, the material under study and an inert reference are made to undergo identical thermal cycles, (i.e., same cooling or heating programme) while recording any temperature difference between sample and reference.[1] This differential temperature is then plotted against time, or against temperature (DTA curve, or thermogram). Changes in the sample, either exothermic or endothermic, can be detected relative to the inert reference. Thus, a DTA curve provides data on the transformations that have occurred, such as glass transitions, crystallization, melting and sublimation. The area under a DTA peak is the enthalpy change and is not affected by the heat capacity of the sample. - - DifferentialThermalAnalysis - DTA - DifferentialThermalAnalysis - Differential thermal analysis (DTA) is a thermoanalytic technique that is similar to differential scanning calorimetry. In DTA, the material under study and an inert reference are made to undergo identical thermal cycles, (i.e., same cooling or heating programme) while recording any temperature difference between sample and reference.[1] This differential temperature is then plotted against time, or against temperature (DTA curve, or thermogram). Changes in the sample, either exothermic or endothermic, can be detected relative to the inert reference. Thus, a DTA curve provides data on the transformations that have occurred, such as glass transitions, crystallization, melting and sublimation. The area under a DTA peak is the enthalpy change and is not affected by the heat capacity of the sample. - - - - - - Thermomechanical analysis (TMA) is a technique used in thermal analysis, a branch of materials science which studies the properties of materials as they change with temperature. - - ThermochemicalTesting - TMA - ThermochemicalTesting - Thermomechanical analysis (TMA) is a technique used in thermal analysis, a branch of materials science which studies the properties of materials as they change with temperature. - - - - - - - - - - - - - - GaugePressure - GaugePressure - https://www.wikidata.org/wiki/Q109594211 - 4-14.2 - - - - - - Archetype join attaches two workpiece with geometrically defined shape together, using supplementary workpiece made of amorphous material (e.g. powder). - ArchetypeJoin - ArchetypeJoin - Archetype join attaches two workpiece with geometrically defined shape together, using supplementary workpiece made of amorphous material (e.g. powder). - - - - - - A manufacturing involving the creation of long-term connection of several workpieces. - The permanent joining or other bringing together of two or more workpieces of a geometric shape or of similar workpieces with shapeless material. In each case, the cohesion is created locally and increased as a whole. - JoinManufacturing - DIN 8580:2020 - Fügen - JoinManufacturing - A manufacturing involving the creation of long-term connection of several workpieces. - - - - - - - - - - - - - - - One-sixth of the mean square distance between the point where a neutron enters a specified class and the point where it leaves this class. - DiffusionArea - DiffusionArea - https://qudt.org/vocab/quantitykind/DiffusionArea - https://www.wikidata.org/wiki/Q98966292 - 10-72.2 - One-sixth of the mean square distance between the point where a neutron enters a specified class and the point where it leaves this class. - - - - - - - - - - - - - - - - Quantity in condensed matter physics. - EnergyDensityOfStates - EnergyDensityOfStates - https://qudt.org/vocab/quantitykind/EnergyDensityOfStates - https://www.wikidata.org/wiki/Q105687031 - 12-16 - Quantity in condensed matter physics. - - - - - - - - - - - - - - - quotient of the number of vibrational modes in an infinitesimal interval of angular frequency, and the product of the width of that interval and volume - DensityOfVibrationalStates - DensityOfVibrationalStates - https://qudt.org/vocab/quantitykind/DensityOfStates - https://www.wikidata.org/wiki/Q105637294 - 12-12 - quotient of the number of vibrational modes in an infinitesimal interval of angular frequency, and the product of the width of that interval and volume - - - - - - - - - - - - - - Measured in cd/m². Not to confuse with Illuminance, which is measured in lux (cd sr/m²). - a photometric measure of the luminous intensity per unit area of light travelling in a given direction. - Luminance - Luminance - http://qudt.org/vocab/quantitykind/Luminance - https://doi.org/10.1351/goldbook.L03640 - - - - - - A 'Mathematical' that has no unknown value, i.e. all its 'Variable"-s parts refers to a 'Number' (for scalars that have a built-in datatype) or to another 'Numerical' (for complex numerical data structures that should rely on external implementations). - Numerical - Numerical - A 'Mathematical' that has no unknown value, i.e. all its 'Variable"-s parts refers to a 'Number' (for scalars that have a built-in datatype) or to another 'Numerical' (for complex numerical data structures that should rely on external implementations). - - - - - - - Probability that a neutron will not escape from the reactor during the slowing-down process or while it diffuses as a thermal neutron. - NonLeakageProbability - NonLeakageProbability - https://qudt.org/vocab/quantitykind/Non-LeakageProbability - https://www.wikidata.org/wiki/Q99415566 - 10-77 - Probability that a neutron will not escape from the reactor during the slowing-down process or while it diffuses as a thermal neutron. - - - - - - Probability is a dimensionless quantity that can attain values between 0 and 1; zero denotes the impossible event and 1 denotes a certain event. - The propability for a certain outcome, is the ratio between the number of events leading to the given outcome and the total number of events. - Probability - Probability - Probability is a dimensionless quantity that can attain values between 0 and 1; zero denotes the impossible event and 1 denotes a certain event. - https://doi.org/10.1351/goldbook.P04855 - - - - - - The class of individuals that stand for gravitons elementary particles. - While this particle is only supposed to exist, the EMMO approach to classical and quantum systems represents fields as made of particles. - -For this reason graviton is an useful concept to homogenize the approach between different fields. - Graviton - Graviton - The class of individuals that stand for gravitons elementary particles. - While this particle is only supposed to exist, the EMMO approach to classical and quantum systems represents fields as made of particles. - -For this reason graviton is an useful concept to homogenize the approach between different fields. - https://en.wikipedia.org/wiki/Graviton - - - - - - - - - - - - - - - - - - - - - - A boson that is a single elementary particle. - A particle with integer spin that follows Bose–Einstein statistics. - FundamentalBoson - FundamentalBoson - A particle with integer spin that follows Bose–Einstein statistics. - A boson that is a single elementary particle. - https://en.wikipedia.org/wiki/Boson#Elementary_bosons - - - - - - - Hypothetical pressure of gas if it alone occupied the volume of the mixture at the same temperature. - PartialPressure - PartialPressure - https://qudt.org/vocab/quantitykind/PartialPressure - https://www.wikidata.org/wiki/Q27165 - 9-19 - Hypothetical pressure of gas if it alone occupied the volume of the mixture at the same temperature. - https://doi.org/10.1351/goldbook.P04420 - - - - - - - - - - - - - - - The force applied perpendicular to the surface of an object per unit area over which that force is distributed. - Pressure - Pressure - http://qudt.org/vocab/quantitykind/Pressure - 4-14.1 - The force applied perpendicular to the surface of an object per unit area over which that force is distributed. - https://doi.org/10.1351/goldbook.P04819 - - - - - - Data normalization involves adjusting raw data to a notionally common scale. - It involves the creation of shifted and/or scaled versions of the values to allow post-processing in a way that eliminates the effects of influences on subsequent properties extraction. - - DataNormalisation - DataNormalisation - Data normalization involves adjusting raw data to a notionally common scale. - It involves the creation of shifted and/or scaled versions of the values to allow post-processing in a way that eliminates the effects of influences on subsequent properties extraction. - - - - - - Data preparation is the process of manipulating (or pre-processing) data (which may come from disparate data sources) to improve their quality or reduce bias in subsequent analysis. - DataPreparation - DataPreparation - Data preparation is the process of manipulating (or pre-processing) data (which may come from disparate data sources) to improve their quality or reduce bias in subsequent analysis. - - - - - - Removal of material by means of rigid or flexible discs or belts containing abrasives. - Grinding - Schleifen - Grinding - - - - - - UndefinedEdgeCutting - Spanen mit geometrisch unbestimmten Schneiden - UndefinedEdgeCutting - - - - - - A physics-based model based on a physics equation describing the behaviour of atoms. - AtomisticModel - AtomisticModel - A physics-based model based on a physics equation describing the behaviour of atoms. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - A solvable set of one Physics Equation and one or more Materials Relations. - MaterialsModel - https://op.europa.eu/en/publication-detail/-/publication/ec1455c3-d7ca-11e6-ad7c-01aa75ed71a1 - MaterialsModel - A solvable set of one Physics Equation and one or more Materials Relations. - - - - - - - Reciprocal of the decay constant λ. - MeanDurationOfLife - MeanLifeTime - MeanDurationOfLife - https://qudt.org/vocab/quantitykind/MeanLifetime - https://www.wikidata.org/wiki/Q1758559 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-13 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-04-47 - 10-25 - Reciprocal of the decay constant λ. - - - - - - Physical quantity for describing the temporal distance between events. - Duration - Duration - https://www.wikidata.org/wiki/Q2199864 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-01-13 - 3-9 - Physical quantity for describing the temporal distance between events. - - - - - - - - - - - - - - vector quantity giving the rate of change of angular velocity - AngularAcceleration - AngularAcceleration - https://qudt.org/vocab/quantitykind/AngularAcceleration - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-01-46 - https://dbpedia.org/page/Angular_acceleration - 3-13 - vector quantity giving the rate of change of angular velocity - https://en.wikipedia.org/wiki/Angular_acceleration - - - - - - A quantity whose magnitude is independent of the size of the system. - Note that not all physical quantities can be categorised as being either intensive or extensive. For example the square root of the mass. - Intensive - Intensive - A quantity whose magnitude is independent of the size of the system. - Temperature -Density -Pressure -ChemicalPotential - - - - - - - - - - - - - - The interest is on the 4D object as it extends in time (process) or as it persists in time (object): -- object (focus on spatial configuration) -- process (focus on temporal evolution) - -The concepts of endurant and perdurant implicitly rely on the concept of instantaneous 3D snapshot of the world object, that in the EMMO is not allowed since everything extends in 4D and there are no abstract objects. Moreover, time is a measured property in the EMMO and not an objective characteristic of an object, and cannot be used as temporal index to identify endurant position in time. - -For this reason an individual in the EMMO can always be classified both endurant and perdurant, due to its nature of 4D entity (e.g. an individual may belong both to the class of runners and the class of running process), and the distinction is purely semantic. In fact, the object/process distinction is simply a matter of convenience in a 4D approach since a temporal extension is always the case, and stationarity depends upon observer time scale. For this reason, the same individual (4D object) may play the role of a process or of an object class depending on the object to which it relates. - -Nevertheless, it is useful to introduce categorizations that characterize persistency through continuant and occurrent concepts, even if not ontologically but only cognitively defined. This is also due to the fact that our language distinguish between nouns and verbs to address things, forcing the separation between things that happens and things that persist. - -This perspective provides classes conceptually similar to the concepts of endurant and perdurant (a.k.a. continuant and occurrent). We claim that this distinction is motivated by our cognitive bias, and we do not commit to the fact that both these kinds of entity “do really exist”. For this reason, a whole instance can be both process and object, according to different cognitive approaches (see Wonderweb D17). - -The distinction between endurant and perdurant as usually introduced in literature (see BFO SPAN/SNAP approach) is then no more ontological, but can still be expressed through the introduction of ad hoc primitive definitions that follow the interpreter endurantist or perdurantist attitude. - The union of the object or process classes. - Persistence - Persistence - The union of the object or process classes. - - - - - - Forming of a solid body, whereby the plastic state is essentially brought about by shear stress. - ShearForming - Schubumformen - ShearForming - - - - - - - - - - - - - - - A whole possessing some proper parts of its same type. - Redundant - NonMaximal - Redundant - A whole possessing some proper parts of its same type. - An object A which is classified as water-fluid possesses a proper part B which is water itself if the lenght scale of the B is larger than the water intermolecular distance keeping it in the continuum range. In this sense, A is redundant. - -If A is a water-fluid so small that its every proper part is no more a continuum object (i.e. no more a fluid), then A is fundamental. - - - - - - - - - - - - - - - A whole that represent the overall lifetime of the world object that represents according to some holistic criteria. - Fundamental - Lifetime - Maximal - Fundamental - A whole that represent the overall lifetime of the world object that represents according to some holistic criteria. - A marathon is an example of class whose individuals are always maximal since the criteria satisfied by a marathon 4D entity poses some constraints on its temporal and spatial extent. - -On the contrary, the class for a generic running process does not necessarily impose maximality to its individuals. A running individual is maximal only when it extends in time for the minimum amount required to identify a running act, so every possible temporal part is always a non-running. - -Following the two examples, a marathon individual is a maximal that can be decomposed into running intervals. The marathon class is a subclass of running. - - - - - - - T+1 L-3 M0 I0 Θ0 N0 J0 - - - - - TimePerVolumeUnit - TimePerVolumeUnit - - - - - - - - - - - - - - - - - - - - - - A bosonic elementary particle that mediates interactions among elementary fermions, and thus acts as a force carrier. - All known gauge bosons have a spin of 1 and are hence also vector bosons. - GaugeBoson - GaugeBoson - A bosonic elementary particle that mediates interactions among elementary fermions, and thus acts as a force carrier. - All known gauge bosons have a spin of 1 and are hence also vector bosons. - Gauge bosons can carry any of the four fundamental interactions of nature. - https://en.wikipedia.org/wiki/Gauge_boson - - - - - - Probe is the physical tool (i.e., a disturbance, primary solicitation, or a gadget), controlled over time, that generates measurable fields that interact with the sample to acquire information on the specimen’s behaviour and properties. - - Probe - Probe - Probe is the physical tool (i.e., a disturbance, primary solicitation, or a gadget), controlled over time, that generates measurable fields that interact with the sample to acquire information on the specimen’s behaviour and properties. - In dynamic light scattering, temporal fluctuations of backscattered light due to Brownian motion and flow of nanoparticles are the probe, resolved as function of pathlength in the sample. From fluctuation analysis (intensity correlations) and the wavelength of light in the medium, the (distribution of) diffusion coefficient(s) can be measured during flow. The Stokes-Einstein relation yields the particle size characteristics. - In electron microscopy (SEM or TEM), the probe is a beam of electrons with known energy that is focused (and scanned) on the sample’s surface with a well-defined beam-size and scanning algorithm. - In mechanical testing, the probe is a the tip plus a force actuator, which is designed to apply a force over-time on a sample. Many variants can be defined depending on way the force is applied (tensile/compressive uniaxial tests, bending test, indentation test) and its variation with time (static tests, dynamic/cyclic tests, impact tests, etc…) - In spectroscopic methods, the probe is a beam of light with pre-defined energy (for example in the case of laser beam for Raman measurements) or pre-defined polarization (for example in the case of light beam for Spectroscopic Ellipsometry methods), that will be properly focused on the sample’s surface with a welldefined geometry (specific angle of incidence). - In x-ray diffraction, the probe is a beam of x-rays with known energy that is properly focused on the sample’s surface with a well-defined geometry - - - - - - Whatever hardware is used during the characterisation process. - CharacterisationHardware - CharacterisationHardware - Whatever hardware is used during the characterisation process. - - - - - - - The sample after a preparation process. - - PreparedSample - PreparedSample - The sample after a preparation process. - - - - - - Material, sufficiently homogeneous and stable with reference to one or more specified properties, which has been established to be fit for its intended use in measurement or in examination -NOTE 1 Reference materials can be certified reference materials or reference materials without a certified property -value. -NOTE 2 For a reference material to be used as a measurement standard for calibration purposes it needs to be a certified reference material. -NOTE 3 Reference materials can be used for measurement precision evaluation and quality control. -EXAMPLE Human serum without an assigned quantity value for the amount-of-substance concentration of the inherent cholesterol, used for quality control. -NOTE 4 Properties of reference materials can be quantities or nominal properties. -NOTE 5 A reference material is sometimes incorporated into a specially fabricated device. -EXAMPLE Spheres of uniform size mounted on a microscope slide. -NOTE 6 Some reference materials have assigned values in a unit outside the SI. Such materials include vaccines to -which International Units (IU) have been assigned by the World Health Organization. -NOTE 7 A given reference material can only be used for one purpose in a measurement, either calibration or quality -control, but not both. -NOTE 8 ISO/REMCO has an analogous definition but uses the term “measurement process” (ISO Guide 30, Reference -materials – Selected terms and definitions, definition 2.1.1) for both measurement and examination. - --- International Vocabulary of Metrology(VIM) - Material, sufficiently homogeneous and stable with respect to one or more specified properties, which has been established to be fit for its intended use in a measurement process”. - - ReferenceSample - Certified Reference Material - Reference material - ReferenceSpecimen - ReferenceSample - Material, sufficiently homogeneous and stable with reference to one or more specified properties, which has been established to be fit for its intended use in measurement or in examination -NOTE 1 Reference materials can be certified reference materials or reference materials without a certified property -value. -NOTE 2 For a reference material to be used as a measurement standard for calibration purposes it needs to be a certified reference material. -NOTE 3 Reference materials can be used for measurement precision evaluation and quality control. -EXAMPLE Human serum without an assigned quantity value for the amount-of-substance concentration of the inherent cholesterol, used for quality control. -NOTE 4 Properties of reference materials can be quantities or nominal properties. -NOTE 5 A reference material is sometimes incorporated into a specially fabricated device. -EXAMPLE Spheres of uniform size mounted on a microscope slide. -NOTE 6 Some reference materials have assigned values in a unit outside the SI. Such materials include vaccines to -which International Units (IU) have been assigned by the World Health Organization. -NOTE 7 A given reference material can only be used for one purpose in a measurement, either calibration or quality -control, but not both. -NOTE 8 ISO/REMCO has an analogous definition but uses the term “measurement process” (ISO Guide 30, Reference -materials – Selected terms and definitions, definition 2.1.1) for both measurement and examination. - --- International Vocabulary of Metrology(VIM) - Quality control sample used to determine accuracy and precision of method. [ISO 17858:2007] - Material, sufficiently homogeneous and stable with respect to one or more specified properties, which has been established to be fit for its intended use in a measurement process”. - Reference material - - - - - - - - - - - - - - - Magnitude of the magnetic moment of an electron in a state with orbital angular momentum quantum number l=1 due to its orbital motion. - BohrMagneton - BohrMagneton - https://www.wikidata.org/wiki/Q737120 - 10-9.2 - Magnitude of the magnetic moment of an electron in a state with orbital angular momentum quantum number l=1 due to its orbital motion. - - - - - - - MolarEnthalpy - MolarEnthalpy - Enthalpy per amount of substance. - https://www.wikidata.org/wiki/Q88769977 - 9-6.2 - - - - - - System program refers to operating systems and utility programs that manage computer resources at a low level enabling a computer to function. - SystemProgram - SystemProgram - System program refers to operating systems and utility programs that manage computer resources at a low level enabling a computer to function. - An operating system. A graphic driver. - - - - - - - - - - - - + + + - A program is a sequence of instructions understandable by a computer's central processing unit (CPU) that indicates which operations the computer should perform on a set of data. - A set of instructions that tell a computer what to do. - Program - Executable - Program - A set of instructions that tell a computer what to do. - A program is a sequence of instructions understandable by a computer's central processing unit (CPU) that indicates which operations the computer should perform on a set of data. - - - - - - - - - - - - - A whole is always defined using a criterion expressed through the classical transitive parthood relation. -This class is expected to host the definition of world objects as they appear in its wholeness, dependently on some of their parts and independently on the surroundings. - A whole is categorized as fundamental (or maximal) or redundant (non-maximal). - The superclass of entities which are defined by requiring the existence of some parts (at least one) of specifically given types, where the specified types are different with respect to the type of the whole. - Whole - Whole - The superclass of entities which are defined by requiring the existence of some parts (at least one) of specifically given types, where the specified types are different with respect to the type of the whole. - A whole is always defined using a criterion expressed through the classical transitive parthood relation. -This class is expected to host the definition of world objects as they appear in its wholeness, dependently on some of their parts and independently on the surroundings. - + hasURIValue + hasURIValue + - - - - - T0 L-1 M0 I+1 Θ0 N0 J0 - - - - - MagneticFieldStrengthUnit - MagneticFieldStrengthUnit - + + + + + + + The owl:dataProperty that provides a serialisation of an EMMO symbol data entity. + hasSymbolValue + hasSymbolValue + The owl:dataProperty that provides a serialisation of an EMMO symbol data entity. + - - - - - A neutrino belonging to the third generation of leptons. - TauNeutrino - TauNeutrino - A neutrino belonging to the third generation of leptons. - https://en.wikipedia.org/wiki/Tau_neutrino - + + + + + + The owl:dataProperty that provides a serialisation of an EMMO numerical data entity. + hasNumericalValue + hasNumericalValue + The owl:dataProperty that provides a serialisation of an EMMO numerical data entity. + - - - - - - - - - - - - - - - - - - ThirdGenerationFermion - ThirdGenerationFermion - + + + + hasURNValue + hasURNValue + - - - - - - - - - - - - - - - - - - - - - An elementary particle with spin 1/2 that interacts only via the weak interaction and gravity. - NeutrinoType - NeutrinoType - An elementary particle with spin 1/2 that interacts only via the weak interaction and gravity. - https://en.wikipedia.org/wiki/Neutrino - + + + + + + A string representing the UniqueID of a CharacterisationHardware + hasUniqueID + hasUniqueID + A string representing the UniqueID of a CharacterisationHardware + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - A causal object whose properties variation are encoded by an agent and that can be decoded by another agent according to a specific rule. - Variations in data are generated by an agent (not necessarily human) and are intended to be decoded by the same or another agent using the same encoding rules. -Data are always generated by an agent but not necessarily possess a semantic meaninig, either because it's lost or unknown or because simply they possess none (e.g. a random generation of symbols). -A data object may be used as the physical basis for a sign, under Semiotics perspective. - We call "decoding" the act of recognise the variation according to a particular rule and generate another equivalent schema (e.g. in the agent's cognitive apparatus, as another form of data). -We call "interpreting" the act of providing semantic meaning to data, which is covered by the semiotic perspective. - EncodedData - EncodedVariation - EncodedData - A causal object whose properties variation are encoded by an agent and that can be decoded by another agent according to a specific rule. - A Radio Morse Code transmission can be addressed by combination of perspectives. + + + + hasURLValue + hasURLValue + -Physicalistic: the electromagnetic pulses can be defined as individual A (of type Field) and the strip of paper coming out a printer receiver can be defined as individual B (of type Matter). -Data: both A and B are also DiscreteData class individuals. In particular they may belong to a MorseData class, subclass of DiscreteData. -Perceptual: B is an individual belonging to the graphical entities expressing symbols. In particular is a formula under the MorseLanguage class, made of a combination of . and - symbols. -Semiotics: A and B can be signs if they refers to something else (e.g. a report about a fact, names). - A signal through a cable. A sound wave. Words on a page. The pattern of excited states within a computer RAM. - We call "decoding" the act of recognise the variation according to a particular rule and generate another equivalent schema (e.g. in the agent's cognitive apparatus, as another form of data). -We call "interpreting" the act of providing semantic meaning to data, which is covered by the semiotic perspective. - https://no.wikipedia.org/wiki/Data - + + + - - - - - - - - - - - - A data is a causal object whose variations (non-uniformity) can be recognised and eventually interpreted. -A data can be of different physical types (e.g., matter, wave, atomic excited states). -How the variations are recognised and eventually decoded depends on the interpreting rules that characterise that type of data. -Variations are pure physical variations and do not necessarily possess semantic meaning. - A perspective in which entities are represented according to the variation of their properties. - Data - Luciano Floridi, "Information - A very Short Introduction", Oxford University Press., (2010) ISBN 978-0199551378 - Contrast - Dedomena - Pattern - Data - A perspective in which entities are represented according to the variation of their properties. - A data is a causal object whose variations (non-uniformity) can be recognised and eventually interpreted. -A data can be of different physical types (e.g., matter, wave, atomic excited states). -How the variations are recognised and eventually decoded depends on the interpreting rules that characterise that type of data. -Variations are pure physical variations and do not necessarily possess semantic meaning. - The covering axiom that defines the data class discriminates within all the possible causal objects between encoded or non encoded. - + + + - - - - - The exponential of the ratio of the chemical potential to R*T where R is the gas constant and T the thermodynamic temperature. - AbsoluteActivity - AbsoluteActivity - https://qudt.org/vocab/quantitykind/AbsoluteActivity - https://www.wikidata.org/wiki/Q56638155 - 9-18 - The exponential of the ratio of the chemical potential to R*T where R is the gas constant and T the thermodynamic temperature. - https://goldbook.iupac.org/terms/view/A00019 - + + + + An elucidation should address the real world entities using the concepts introduced by the conceptualisation annotation. + Short enlightening explanation aimed to facilitate the user in drawing the connection (interpretation) between a OWL entity and the real world object(s) for which it stands. + elucidation + elucidation + Short enlightening explanation aimed to facilitate the user in drawing the connection (interpretation) between a OWL entity and the real world object(s) for which it stands. + An elucidation should address the real world entities using the concepts introduced by the conceptualisation annotation. + - - - - A causal expansion is a fundamental causal system that is expressed as a complete bipartite directed graph K(m,n), when m<n. - CausalExpansion - CausalExpansion - A causal expansion is a fundamental causal system that is expressed as a complete bipartite directed graph K(m,n), when m<n. - + + + + - - - - - - - - - - - - - - - - - - - - A causal system that is the representation of a Feynman diagram, where quantum represents the real particles entering and exiting the system. - A fundamental physical process is made of one or more standard particles as input, and one or more standard particles as output, where each input is direct cause of each output. -Each fundamental physical phenomena refers to a Feynman diagram, hence is made at least of three standard model particles. -This requirement implies that a physical phenomena is either a decay, annihilation, interaction, collapse or creation phenomena (fundamental) or a composition of them (non-fundamental). - A fundamental system is expressed as a complete bipartite directed graph K(m,n) of quantums, m being the number of originating quantums, and n being the receiving quantums. - FundamentalInteraction - FundamentalInteraction - A fundamental physical process is made of one or more standard particles as input, and one or more standard particles as output, where each input is direct cause of each output. -Each fundamental physical phenomena refers to a Feynman diagram, hence is made at least of three standard model particles. -This requirement implies that a physical phenomena is either a decay, annihilation, interaction, collapse or creation phenomena (fundamental) or a composition of them (non-fundamental). - A causal system that is the representation of a Feynman diagram, where quantum represents the real particles entering and exiting the system. - A fundamental system is expressed as a complete bipartite directed graph K(m,n) of quantums, m being the number of originating quantums, and n being the receiving quantums. - + + + + - - - - Tomography is imaging by sections or sectioning that uses any kind of penetrating wave. The method is used in radiology, archaeology, biology, atmospheric science, geophysics, oceanography, plasma physics, materials science, cosmochemistry, astrophysics, quantum information, and other areas of science. The word tomography is derived from Ancient Greek τόμος tomos, "slice, section" and γράφω graphō, "to write" or, in this context as well, "to describe." A device used in tomography is called a tomograph, while the image produced is a tomogram. - Tomography - Tomography - Tomography is imaging by sections or sectioning that uses any kind of penetrating wave. The method is used in radiology, archaeology, biology, atmospheric science, geophysics, oceanography, plasma physics, materials science, cosmochemistry, astrophysics, quantum information, and other areas of science. The word tomography is derived from Ancient Greek τόμος tomos, "slice, section" and γράφω graphō, "to write" or, in this context as well, "to describe." A device used in tomography is called a tomograph, while the image produced is a tomogram. - + + + + A comment can be addressed to facilitate interpretation, to suggest possible usage, to clarify the concepts behind each entity with respect to other ontological apporaches. + A text that add some information about the entity. + comment + comment + A text that add some information about the entity. + A comment can be addressed to facilitate interpretation, to suggest possible usage, to clarify the concepts behind each entity with respect to other ontological apporaches. + - - - - The description of the overall characterisation method. It can be composed of different steps (e.g. sample preparation, calibration, measurement, post-processing). - - A characterisation method is not only related to the measurement process which can be one of its steps. - CharacterisationTechnique - Characterisation procedure - Characterisation technique - CharacterisationTechnique - The description of the overall characterisation method. It can be composed of different steps (e.g. sample preparation, calibration, measurement, post-processing). - A characterisation method is not only related to the measurement process which can be one of its steps. - + + + + Definitions are usually taken from Wiktionary. + The etymology annotation explains the origin of a word and the historical development of its meaning. + etymology + etymology + The etymology annotation explains the origin of a word and the historical development of its meaning. + Definitions are usually taken from Wiktionary. + The etymology annotation is usually applied to rdfs:label entities, to better understand the connection between a label and the concept it concisely represents. + - - - - + - Force resisting the motion when a body (such as a ball, tire, or wheel) rolls on a surface. - RollingResistance - RollingDrag - RollingFrictionForce - RollingResistance - https://www.wikidata.org/wiki/Q914921 - 4-9.5 - Force resisting the motion when a body (such as a ball, tire, or wheel) rolls on a surface. - + + Corresponding item number in ISO 80 000. + ISO80000Reference + https://www.iso.org/obp/ui/#iso:std:iso:80000:-1:ed-1:v1:en + ISO80000Reference + Corresponding item number in ISO 80 000. + 3-1.1 (ISO80000 reference to length) + - - - - - - - - - - - + - Any interaction that, when unopposed, will change the motion of an object - Force - Force - http://qudt.org/vocab/quantitykind/Force - 4-9.1 - Any interaction that, when unopposed, will change the motion of an object - https://doi.org/10.1351/goldbook.F02480 - + + URL corresponding to entry in Wikidata. + wikidataReference + https://www.wikidata.org/ + wikidataReference + URL corresponding to entry in Wikidata. + - - - - - Quotient of tangential and normal component of the force applied to a body which is rolling at constant speed over a surface. - RollingResistanceFactor - RollingResistanceFactor - https://www.wikidata.org/wiki/Q91738044 - 4-23.3 - Quotient of tangential and normal component of the force applied to a body which is rolling at constant speed over a surface. - + + + + Illustrative example of how the entity is used. + example + example + Illustrative example of how the entity is used. + - - - - Data that are non-quantitatively interpreted (e.g., qualitative data, types). - NonNumericalData - NonNumericalData - Data that are non-quantitatively interpreted (e.g., qualitative data, types). - + + + + A definition univocally determines a OWL entity using necessary and sufficient conditions referring to other OWL entities. + Precise and univocal description of an ontological entity in the framework of an axiomatic system. + definition + definition + Precise and univocal description of an ontological entity in the framework of an axiomatic system. + A definition univocally determines a OWL entity using necessary and sufficient conditions referring to other OWL entities. + - - + - "Quantity in a conventionally chosen subset of a given system of quantities, where no quantity in the subset can be expressed in terms of the other quantities within that subset" -ISO 80000-1 - BaseQuantity - BaseQuantity - "Quantity in a conventionally chosen subset of a given system of quantities, where no quantity in the subset can be expressed in terms of the other quantities within that subset" -ISO 80000-1 - base quantity - + + URL to corresponing entity in QUDT. + qudtReference + http://www.qudt.org/2.1/catalog/qudt-catalog.html + qudtReference + URL to corresponing entity in QUDT. + - - - - - - - - - - - - - - - - - - - + + + + metrologicalReference + metrologicalReference + + + + + + + + + + + + + + ISO14040Reference + ISO14040Reference + + + + + + IRI to corresponding concept in the Ontology of units of Measure. + omReference + https://enterpriseintegrationlab.github.io/icity/OM/doc/index-en.html + https://github.com/HajoRijgersberg/OM + omReference + IRI to corresponding concept in the Ontology of units of Measure. + + + + + + A conceptualisation is the preliminary step behind each theory, preceding each logical formalisation. The readers approaching an ontology entity should first read the conceptualisation annotation to clearly understand "what we are talking about" and the accompanying terminology, and then read the elucidation. + The conceptualisation annotation is a comment that helps the reader to understand how the world has been conceptualised by the ontology authors. + conceptualisation + conceptualisation + The conceptualisation annotation is a comment that helps the reader to understand how the world has been conceptualised by the ontology authors. + A conceptualisation is the preliminary step behind each theory, preceding each logical formalisation. The readers approaching an ontology entity should first read the conceptualisation annotation to clearly understand "what we are talking about" and the accompanying terminology, and then read the elucidation. + An elucidation can provide references to external knowledge sources (i.e. ISO, Goldbook, RoMM). + + + - A 'Mathematical' entity that is made of a 'Numeral' and a 'MeasurementUnit' defined by a physical law, connected to a physical entity through a model perspective. Measurement is done according to the same model. - In the same system of quantities, dim ρB = ML−3 is the quantity dimension of mass concentration of component B, and ML−3 is also the quantity dimension of mass density, ρ. -ISO 80000-1 - Measured or simulated 'physical propertiy'-s are always defined by a physical law, connected to a physical entity through a model perspective and measurement is done according to the same model. + + + + The UN/CEFACT Recommendation 20 provides three character alphabetic and alphanumeric codes for representing units of measurement for length, area, volume/capacity, mass (weight), time, and other quantities used in international trade. The codes are intended for use in manual and/or automated systems for the exchange of information between participants in international trade. + uneceCommonCode + uneceCommonCode + The UN/CEFACT Recommendation 20 provides three character alphabetic and alphanumeric codes for representing units of measurement for length, area, volume/capacity, mass (weight), time, and other quantities used in international trade. The codes are intended for use in manual and/or automated systems for the exchange of information between participants in international trade. + -Systems of units suggests that this is the correct approach, since except for the fundamental units (length, time, charge) every other unit is derived by mathematical relations between these fundamental units, implying a physical laws or definitions. - Measurement units of quantities of the same quantity dimension may be designated by the same name and symbol even when the quantities are not of the same kind. + + + -For example, joule per kelvin and J/K are respectively the name and symbol of both a measurement unit of heat capacity and a measurement unit of entropy, which are generally not considered to be quantities of the same kind. + + + -However, in some cases special measurement unit names are restricted to be used with quantities of specific kind only. + + + -For example, the measurement unit ‘second to the power minus one’ (1/s) is called hertz (Hz) when used for frequencies and becquerel (Bq) when used for activities of radionuclides. + + + -As another example, the joule (J) is used as a unit of energy, but never as a unit of moment of force, i.e. the newton metre (N · m). - — quantities of the same kind have the same quantity dimension, -— quantities of different quantity dimensions are always of different kinds, and -— quantities having the same quantity dimension are not necessarily of the same kind. -ISO 80000-1 - PhysicalQuantity - PhysicalQuantity - A 'Mathematical' entity that is made of a 'Numeral' and a 'MeasurementUnit' defined by a physical law, connected to a physical entity through a model perspective. Measurement is done according to the same model. - + + + + + URL to corresponding dpbedia entry. + dbpediaReference + https://wiki.dbpedia.org/ + dbpediaReference + URL to corresponding dpbedia entry. + - - - - Length of a rectifiable curve between two of its points. - PathLength - ArcLength - PathLength - https://www.wikidata.org/wiki/Q7144654 - https://dbpedia.org/page/Arc_length - 3-1.7 - Length of a rectifiable curve between two of its points. - https://en.wikipedia.org/wiki/Arc_length - + + + + Axiom not included in the theory because of OWL 2 DL global restrictions for decidability. + OWLDLRestrictedAxiom + OWLDLRestrictedAxiom + Axiom not included in the theory because of OWL 2 DL global restrictions for decidability. + - - - - - - - - - - - + + + + + + + + + + + + + + The Unified Code for Units of Measure (UCUM) is a code system intended to include all units of measures being contemporarily used in international science, engineering, and business. The purpose is to facilitate unambiguous electronic communication of quantities together with their units. + Unified Code for Units of Measure (UCUM). + ucumCode + https://ucum.org/ + ucumCode + Unified Code for Units of Measure (UCUM). + The Unified Code for Units of Measure (UCUM) is a code system intended to include all units of measures being contemporarily used in international science, engineering, and business. The purpose is to facilitate unambiguous electronic communication of quantities together with their units. + + + - Activity per unit volume of the sample. - ActivityDensity - ActivityConcentration - VolumetricActivity - VolumicActivity - ActivityDensity - https://qudt.org/vocab/quantitykind/ActivityConcentration - https://www.wikidata.org/wiki/Q423263 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-09 - 10-29 - Activity per unit volume of the sample. - + + URL for the entry in the International Electrotechnical Vocabulary (IEV). + IEVReference + https://www.electropedia.org/ + IEVReference + URL for the entry in the International Electrotechnical Vocabulary (IEV). + - - + - Isothermal microcalorimetry (IMC) is a laboratory method for real-time monitoring and dynamic analysis of chemical, physical and biological processes. Over a period of hours or days, IMC determines the onset, rate, extent and energetics of such processes for specimens in small ampoules (e.g. 3–20 ml) at a constant set temperature (c. 15 °C–150 °C). + -IMC accomplishes this dynamic analysis by measuring and recording vs. elapsed time the net rate of heat flow (μJ/s = μW) to or from the specimen ampoule, and the cumulative amount of heat (J) consumed or produced. - - IsothermalMicrocalorimetry - IMC - IsothermalMicrocalorimetry - Isothermal microcalorimetry (IMC) is a laboratory method for real-time monitoring and dynamic analysis of chemical, physical and biological processes. Over a period of hours or days, IMC determines the onset, rate, extent and energetics of such processes for specimens in small ampoules (e.g. 3–20 ml) at a constant set temperature (c. 15 °C–150 °C). + + + + + The term in the International vocabulary of metrology (VIM) (JCGM 200:2008) that corresponds to the annotated term in EMMO. + VIMTerm + https://www.bipm.org/documents/20126/2071204/JCGM_200_2012.pdf + VIMTerm + quantity value (term in VIM that corresponds to Quantity in EMMO) + The term in the International vocabulary of metrology (VIM) (JCGM 200:2008) that corresponds to the annotated term in EMMO. + -IMC accomplishes this dynamic analysis by measuring and recording vs. elapsed time the net rate of heat flow (μJ/s = μW) to or from the specimen ampoule, and the cumulative amount of heat (J) consumed or produced. - + + + - - - - - - - - - - - - - SecondAxialMomentOfArea - SecondAxialMomentOfArea - https://qudt.org/vocab/quantitykind/SecondAxialMomentOfArea - https://www.wikidata.org/wiki/Q91405496 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-29 - 4-21.1 - + + + - - - - - - - - - - - - - - - An elementary particle of half-integer spin (spin 1⁄2) that does not undergo strong interactions. - Lepton - Lepton - An elementary particle of half-integer spin (spin 1⁄2) that does not undergo strong interactions. - https://en.wikipedia.org/wiki/Lepton - + + + - - - - - - - - - - - - - - - FundamentalMatterParticle - FundamentalMatterParticle - + + + + + + + + + URL to corresponding Wikipedia entry. + wikipediaReference + https://www.wikipedia.org/ + wikipediaReference + URL to corresponding Wikipedia entry. + + + + + + + A link to a graphical representation aimed to facilitate understanding of the concept, or of an annotation. + figure + figure + A link to a graphical representation aimed to facilitate understanding of the concept, or of an annotation. + + + + + + + DOI to corresponding concept in IUPAC + iupacReference + https://goldbook.iupac.org/ + iupacReference + + + + + + A person or organisation acting as a contact point for enquiries about the ontology resource + The annotation should include an email address. + contact + contact + A person or organisation acting as a contact point for enquiries about the ontology resource + The annotation should include an email address. + - - - - - A instance of a material (e.g. nitrogen) can represent different states of matter. The fact that the individual also belongs to other classes (e.g. Gas) would reveal the actual form in which the material is found. - The class of individuals standing for an amount of ordinary matter substance (or mixture of substances) in different states of matter or phases. - Material - Material - The class of individuals standing for an amount of ordinary matter substance (or mixture of substances) in different states of matter or phases. - A instance of a material (e.g. nitrogen) can represent different states of matter. The fact that the individual also belongs to other classes (e.g. Gas) would reveal the actual form in which the material is found. - Material usually means some definite kind, quality, or quantity of matter, especially as intended for use. - + + + - - - - - Matter composed of only matter particles, excluding anti-matter particles. - OrdinaryMatter - OrdinaryMatter - Matter composed of only matter particles, excluding anti-matter particles. - + + + - - - - - - - - - - - - - - - - A composite physical object made of fermions (i.e. having mass and occupying space). - Substance - Substance - A composite physical object made of fermions (i.e. having mass and occupying space). - + + + - - - - Radius of the osculating circle of a planar curve at a particular point of the curve. - RadiusOfCurvature - RadiusOfCurvature - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-01-30 - https://dbpedia.org/page/Radius_of_curvature - 3-1.12 - Radius of the osculating circle of a planar curve at a particular point of the curve. - https://en.wikipedia.org/wiki/Radius_of_curvature - + + + - - - - Distance from the centre of a circle to the circumference. - Radius - Radius - https://qudt.org/vocab/quantitykind/Radius - https://www.wikidata.org/wiki/Q173817 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-01-25 - https://dbpedia.org/page/Radius - 3-1.6 - Distance from the centre of a circle to the circumference. - https://en.wikipedia.org/wiki/Radius - + + + - - - - - - - - - - - - - Number of ions per volume. - IonNumberDensity - IonDensity - IonNumberDensity - https://www.wikidata.org/wiki/Q98831218 - 10-62.2 - Number of ions per volume. - + + + + ISO9000Reference + ISO9000Reference + - - - - - Voltage between substances a and b caused by the thermoelectric effect. - ThermoelectricVoltage - ThermoelectricVoltage - https://www.wikidata.org/wiki/Q105761637 - 12-20 - Voltage between substances a and b caused by the thermoelectric effect. - + + + - - - - Correspond to the work needed per unit of charge to move a test charge between two points in a static electric field. - The difference in electric potential between two points. - Voltage - ElectricPotentialDifference - ElectricTension - Voltage - http://qudt.org/vocab/quantitykind/Voltage - 6-11.3 - The difference in electric potential between two points. - https://doi.org/10.1351/goldbook.V06635 - https://doi.org/10.1351/goldbook.A00424 - + + + - - - - - - - - - - - - - - - - A physical particle with half odd integer spin (1/2, 3/2, etc...) that follows Fermi-Dirac statistics. - Fermion - Fermion - A physical particle with half odd integer spin (1/2, 3/2, etc...) that follows Fermi-Dirac statistics. - https://en.wikipedia.org/wiki/Fermion - + + + - - - - - - - - - - - - - - - A physical particle with integer spin that follows Bose–Einstein statistics. - Boson - Boson - A physical particle with integer spin that follows Bose–Einstein statistics. - https://en.wikipedia.org/wiki/Boson - + + + + - - - - A process can be defined only according to an entity type. The minimum process is an entity made of two entities of the same type that are temporally related. - A whole that is identified according to a criteria based on its temporal evolution that is satisfied throughout its time extension. - Following the common definition of process, the reader may think that every whole should be a process, since every 4D object always has a time dimension. However, in the EMMO we restrict the meaning of the word process to items whose evolution in time have a particular meaning for the ontologist (i.e. every 4D object unfolds in time, but not every 4D time unfolding may be of interest for the ontologist and categorized as a process). + + + -For this reason, the definition of every specific process subclass requires the introduction of a primitive concept. - Process - Occurrent - Perdurant - Process - A whole that is identified according to a criteria based on its temporal evolution that is satisfied throughout its time extension. - A process can be defined only according to an entity type. The minimum process is an entity made of two entities of the same type that are temporally related. + + + + + + + + An analytical technique used for the elemental analysis or chemical characterization of a sample. + + EnergyDispersiveXraySpectroscopy + EDS + EDX + EnergyDispersiveXraySpectroscopy + https://www.wikidata.org/wiki/Q386334 + An analytical technique used for the elemental analysis or chemical characterization of a sample. + https://en.wikipedia.org/wiki/Energy-dispersive_X-ray_spectroscopy - - - - - - - - - - - - - Quotient of the activity A of a sample and the total area S of the surface of that sample. - SurfaceActivityDensity - SurfaceActivityDensity - https://qudt.org/vocab/quantitykind/SurfaceActivityDensity - https://www.wikidata.org/wiki/Q98103005 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-10 - 10-30 - Quotient of the activity A of a sample and the total area S of the surface of that sample. + + + + Spectroscopy is a category of characterization techniques which use a range of principles to reveal the chemical composition, composition variation, crystal structure and photoelectric properties of materials. + + Spectroscopy + Spectroscopy + Spectroscopy is a category of characterization techniques which use a range of principles to reveal the chemical composition, composition variation, crystal structure and photoelectric properties of materials. - - - - An holistic temporal part of a whole. - TemporalRole - HolisticTemporalPart - TemporalRole - An holistic temporal part of a whole. + + + + Defines the Candela base unit in the SI system. + The luminous efficacy of monochromatic radiation of frequency 540 × 10 12 Hz, K cd , is a technical constant that gives an exact numerical relationship between the purely physical characteristics of the radiant power stimulating the human eye (W) and its photobiological response defined by the luminous flux due to the spectral responsivity of a standard observer (lm) at a frequency of 540 × 10 12 hertz. + LuminousEfficacyOf540THzRadiation + LuminousEfficacyOf540THzRadiation + The luminous efficacy of monochromatic radiation of frequency 540 × 10 12 Hz, K cd , is a technical constant that gives an exact numerical relationship between the purely physical characteristics of the radiant power stimulating the human eye (W) and its photobiological response defined by the luminous flux due to the spectral responsivity of a standard observer (lm) at a frequency of 540 × 10 12 hertz. - - - - - - A guess is a theory, estimated and subjective, since its premises are subjective. - Guess - Guess - A guess is a theory, estimated and subjective, since its premises are subjective. + + + + Physical constant that by definition (after the latest revision of the SI system that was enforsed May 2019) has a known exact numerical value when expressed in SI units. + SIExactConstant + SIExactConstant + Physical constant that by definition (after the latest revision of the SI system that was enforsed May 2019) has a known exact numerical value when expressed in SI units. - - - - A coded conventional that cannot be univocally determined and depends on an agent (e.g. a human individual, a community) acting as black-box. - The word subjective applies to property intrisically subjective or non-well defined. In general, when an black-box-like procedure is used for the definition of the property. - -This happens due to e.g. the complexity of the object, the lack of a underlying model for the representation of the object, the non-well specified meaning of the property symbols. + + + + Joining process by softening the surfaces to be joined, either by heat or with a solvent (swelling welding, solvent welding), and pressing the softened surfaces together. + Welding + Schweißen + Welding + -A 'SubjectiveProperty' cannot be used to univocally compare 'Object'-s. + + + + A manufacturing involving the creation of long-term connection of several workpieces. + The permanent joining or other bringing together of two or more workpieces of a geometric shape or of similar workpieces with shapeless material. In each case, the cohesion is created locally and increased as a whole. + JoinManufacturing + DIN 8580:2020 + Fügen + JoinManufacturing + A manufacturing involving the creation of long-term connection of several workpieces. + -e.g. you cannot evaluate the beauty of a person on objective basis. - Subjective - Subjective - A coded conventional that cannot be univocally determined and depends on an agent (e.g. a human individual, a community) acting as black-box. - The beauty of that girl. -The style of your clothing. + + + + A computer language that is domain-independent and can be used for expressing data from any kind of discipline. + DataExchangeLanguage + DataExchangeLanguage + A computer language that is domain-independent and can be used for expressing data from any kind of discipline. + JSON, YAML, XML + https://en.wikipedia.org/wiki/Data_exchange#Data_exchange_languages - - - - A 'conventional' that stand for a 'physical'. - The 'theory' is e.g. a proposition, a book or a paper whose sub-symbols suggest in the mind of the interpreter an interpretant structure that can represent a 'physical'. + + + + A formal language used to communicate with a computer. + The categorisation of computer languages is based on -It is not an 'icon' (like a math equation), because it has no common resemblance or logical structure with the 'physical'. +Guide to the Software Engineering Body of Knowledge (SWEBOK(R)): Version 3.0, January 2014. Editors Pierre Bourque, Richard E. Fairley. Publisher: IEEE Computer Society PressWashingtonDCUnited States. ISBN:978-0-7695-5166-1. +https://www.computer.org/education/bodies-of-knowledge/software-engineering + ComputerLanguage + ComputerLanguage + A formal language used to communicate with a computer. + The categorisation of computer languages is based on -In Peirce semiotics: legisign-symbol-argument - Theory - Theory - A 'conventional' that stand for a 'physical'. +Guide to the Software Engineering Body of Knowledge (SWEBOK(R)): Version 3.0, January 2014. Editors Pierre Bourque, Richard E. Fairley. Publisher: IEEE Computer Society PressWashingtonDCUnited States. ISBN:978-0-7695-5166-1. +https://www.computer.org/education/bodies-of-knowledge/software-engineering + https://en.wikipedia.org/wiki/Computer_language - - - - Estimated - Estimated - The biography of a person that the author have not met. + + + + + For a particle, electric charge q divided by elementary charge e. + The charge number of a particle may be presented as a superscript to the symbol of that particle, e.g. H+, He++, Al3+, Cl−, S=, N3−. + The charge number of an electrically charged particle can be positive or negative. The charge number of an electrically neutral particle is zero. + ChargeNumber + IonizationNumber + ChargeNumber + https://qudt.org/vocab/quantitykind/ChargeNumber + https://www.wikidata.org/wiki/Q1800063 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-05-17 + https://dbpedia.org/page/Charge_number + 10-5.2 + For a particle, electric charge q divided by elementary charge e. + https://en.wikipedia.org/wiki/Charge_number + https://doi.org/10.1351/goldbook.C00993 - - - - - - - - - - - + + - Inverse of the reluctance. - Permeance - Permeance - https://qudt.org/vocab/quantitykind/Permeance - https://www.wikidata.org/wiki/Q77997985 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-29 - 6-40 - Inverse of the reluctance. + Quantities categorised according to ISO 80000-9. + PhysioChemicalQuantity + PhysioChemicalQuantity + Quantities categorised according to ISO 80000-9. - - - - - - - - - - - + + - Measure of the tendency of a substance to leave a phase. - Fugacity - Fugacity - https://qudt.org/vocab/quantitykind/Fugacity - https://www.wikidata.org/wiki/Q898412 - 9-20 - Measure of the tendency of a substance to leave a phase. - https://doi.org/10.1351/goldbook.F02543 + A pure number, typically the number of something. + According to the SI brochure counting does not automatically qualify a quantity as an amount of substance. + +This quantity is used only to describe the outcome of a counting process, without regard of the type of entities. + +There are also some quantities that cannot be described in terms of the seven base quantities of the SI, but have the nature of a count. Examples are a number of molecules, a number of cellular or biomolecular entities (for example copies of a particular nucleic acid sequence), or degeneracy in quantum mechanics. Counting quantities are also quantities with the associated unit one. + PureNumberQuantity + PureNumberQuantity + A pure number, typically the number of something. + 1, +i, +π, +the number of protons in the nucleus of an atom - - - - - - + + - - + + T-2 L+2 M0 I0 Θ-1 N0 J0 - + + - Entropy per amount of substance. - MolarEntropy - MolarEntropy - https://qudt.org/vocab/quantitykind/MolarEntropy - https://www.wikidata.org/wiki/Q68972876 - 9-8 - Entropy per amount of substance. + EntropyPerMassUnit + EntropyPerMassUnit - - - + + - Radius of a sphere such that the relativistic electron energy is distributed uniformly. - ElectronRadius - ElectronRadius - https://www.wikidata.org/wiki/Q2152581 - 10-19.2 - Radius of a sphere such that the relativistic electron energy is distributed uniformly. - + Dimensional unit with its physical dimensionality described accortind to the International System of Units (SI). + In SI are the physical dimensions of the base quantities time (T), length (L), mass (M), electric current (I), thermodynamic temperature (Θ), amount of substance (N) and luminous intensity (J). - - - - parameter characterizing the response to a step input of a first‑order, linear time‑invariant system - TimeConstant - TimeConstant - https://www.wikidata.org/wiki/Q1335249 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-05-26 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=351-45-32 - 3-15 - parameter characterizing the response to a step input of a first‑order, linear time‑invariant system - +In general the dimension of any quantity Q is written in the form of a dimensional product, - - - - - Force opposing the motion of a body sliding on a surface. - KineticFrictionForce - DynamicFrictionForce - KineticFrictionForce - https://www.wikidata.org/wiki/Q91005629 - 4-9.4 - Force opposing the motion of a body sliding on a surface. - + dim Q = T^α L^β M^γ I^δ Θ^ε N^ζ J^η + +where the exponents α, β, γ, δ, ε, ζ and η, which are generally small integers, which can be positive, negative, or zero, are called the dimensional exponents. +-- SI brouchure + +The SI dimensional units are equivalent to dimensional strings that uniquely defines their dimensionality by specifying the values of the coefficients α, β, γ, δ, ε, ζ and η. A dimensional string is a space-separated string of the physical dimension symbols followed by the value of the exponent (including it sign). They should always match the following regular expression: + +^T([+-][1-9]|0) L([+-][1-9]|0) M([+-][1-9]|0) I([+-][1-9]|0) Θ([+-][1-9]|0) N([+-][1-9]|0) J([+-][1-9]|0)$ + +Examples of correspondance between dimensional units and their dimensional units are: + +- AmountOfSubstanceUnit <=> "T0 L0 M0 I0 Θ0 N+1 J0" +- TimeUnit <=> "T+1 L0 M0 I0 Θ0 N0 J0" +- ElectricCurrentDensityUnit <=> "T0 L-2 M0 I+1 Θ0 N0 J0" + SIDimensionalUnit + SIDimensionalUnit + Dimensional unit with its physical dimensionality described accortind to the International System of Units (SI). + In SI are the physical dimensions of the base quantities time (T), length (L), mass (M), electric current (I), thermodynamic temperature (Θ), amount of substance (N) and luminous intensity (J). - - - - A building or group of buildings where goods are manufactured or assembled. - Factory - IndustrialPlant - Factory - A building or group of buildings where goods are manufactured or assembled. - +In general the dimension of any quantity Q is written in the form of a dimensional product, - - - - - MicrocanonicalPartitionFunction - MicrocanonicalPartitionFunction - https://qudt.org/vocab/quantitykind/MicroCanonicalPartitionFunction - https://www.wikidata.org/wiki/Q96106546 - 9-35.1 - + dim Q = T^α L^β M^γ I^δ Θ^ε N^ζ J^η - - - - - The class of individuals that stand for electrons elementary particles belonging to the first generation of leptons. - Electron - Electron - The class of individuals that stand for electrons elementary particles belonging to the first generation of leptons. - https://en.wikipedia.org/wiki/Electron - +where the exponents α, β, γ, δ, ε, ζ and η, which are generally small integers, which can be positive, negative, or zero, are called the dimensional exponents. +-- SI brouchure - - - - - - - - - - - - - - - - - - - - ElectronType - ElectronType - +The SI dimensional units are equivalent to dimensional strings that uniquely defines their dimensionality by specifying the values of the coefficients α, β, γ, δ, ε, ζ and η. A dimensional string is a space-separated string of the physical dimension symbols followed by the value of the exponent (including it sign). They should always match the following regular expression: - - - - - Mass of a constituent divided by the volume of the mixture. - MassConcentration - MassConcentration - http://qudt.org/vocab/quantitykind/MassConcentration - https://doi.org/10.1351/goldbook.M03713 +^T([+-][1-9]|0) L([+-][1-9]|0) M([+-][1-9]|0) I([+-][1-9]|0) Θ([+-][1-9]|0) N([+-][1-9]|0) J([+-][1-9]|0)$ + +Examples of correspondance between dimensional units and their dimensional units are: + +- AmountOfSubstanceUnit <=> "T0 L0 M0 I0 Θ0 N+1 J0" +- TimeUnit <=> "T+1 L0 M0 I0 Θ0 N0 J0" +- ElectricCurrentDensityUnit <=> "T0 L-2 M0 I+1 Θ0 N0 J0" - + - - - - - - - - - - - - + - Quantity representing the spatial distribution of mass in a continuous material. - Density - MassConcentration - MassDensity - Density - http://qudt.org/vocab/quantitykind/Density - Mass per volume. - 4-2 - 9-10 - https://doi.org/10.1351/goldbook.D01590 + ReciprocalVolume + ReciprocalVolume - - + + + - the abundance of a constituent divided by the total volume of a mixture. - Concentration - Concentration - https://qudt.org/vocab/quantitykind/Concentration - https://www.wikidata.org/wiki/Q3686031 - https://dbpedia.org/page/Concentration - the abundance of a constituent divided by the total volume of a mixture. - https://en.wikipedia.org/wiki/Concentration - https://goldbook.iupac.org/terms/view/C01222 + Derived quantities defined in the International System of Quantities (ISQ). + ISQDerivedQuantity + ISQDerivedQuantity + Derived quantities defined in the International System of Quantities (ISQ). - - + + + - - T+1 L+1 M-1 I0 Θ0 N0 J0 + + - - - - LengthTimePerMassUnit - LengthTimePerMassUnit - - - - - - GluonType7 - GluonType7 - - - - + + + + + + + + + + + - + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + - - The class of individuals that stand for gluons elementary particles. - Gluon - Gluon - The class of individuals that stand for gluons elementary particles. - https://en.wikipedia.org/wiki/Gluon + + EMMO entities dimensionality is related to their mereocausal structures. From the no-dimensional quantum entity, we introduce time dimension with the elementary concept, and the spacetime with the causal system concept. +The EMMO conceptualisation does not allow the existence of space without a temporal dimension, the latter coming from a causal relation between entities. +For this reason, the EMMO entities that are not quantum or elementaries, may be considered to be always spatiotemporal. The EMMO poses no constraints to the number of spatial dimensions for a causal system (except being higher than one). + The EMMO conceptualises the world using the primitive concepts of causality and parthood. Parthood is about the composition of world entities starting from other more fundamental entities. Causality is about the interactions between world entities. +The quantum is the smallest indivisible part of any world entity. Quantum individuals are the fundamental causal constituents of the universe, since it is implied that causality originates from quantum-to-quantum interactions. Quantums are no-dimensional, and their aggregation makes spacetime emerge from their causal structure. Causality between macro entities (i.e. entities made of more than one quantum) is explained as the sum of the causality relations between their quantum constituents. +The fundamental distinction between world entities is direct causality self-connectedness: a world entity can be self-connected xor not self-connected depending on the causality network of its fundamental components. +Void regions do not exist in the EMMO, or in other words there is no spacetime without entities, since space and time are measured quantities following a causality relation between entities (spacetime emerges as relational property not as a self-standing entity). +Entities are not placed in space or time: space and time are always relative between entities and are measured. In other words, space and time relations originates from causality interactions. + The class of all the OWL individuals declared by EMMO as standing for world entities. + The disjoint union of the Item and Collection classes. + EMMO + EMMO + The EMMO conceptualises the world using the primitive concepts of causality and parthood. Parthood is about the composition of world entities starting from other more fundamental entities. Causality is about the interactions between world entities. +The quantum is the smallest indivisible part of any world entity. Quantum individuals are the fundamental causal constituents of the universe, since it is implied that causality originates from quantum-to-quantum interactions. Quantums are no-dimensional, and their aggregation makes spacetime emerge from their causal structure. Causality between macro entities (i.e. entities made of more than one quantum) is explained as the sum of the causality relations between their quantum constituents. +The fundamental distinction between world entities is direct causality self-connectedness: a world entity can be self-connected xor not self-connected depending on the causality network of its fundamental components. +Void regions do not exist in the EMMO, or in other words there is no spacetime without entities, since space and time are measured quantities following a causality relation between entities (spacetime emerges as relational property not as a self-standing entity). +Entities are not placed in space or time: space and time are always relative between entities and are measured. In other words, space and time relations originates from causality interactions. + The disjoint union of the Item and Collection classes. + The class of all the OWL individuals declared by EMMO as standing for world entities. + EMMO entities dimensionality is related to their mereocausal structures. From the no-dimensional quantum entity, we introduce time dimension with the elementary concept, and the spacetime with the causal system concept. +The EMMO conceptualisation does not allow the existence of space without a temporal dimension, the latter coming from a causal relation between entities. +For this reason, the EMMO entities that are not quantum or elementaries, may be considered to be always spatiotemporal. The EMMO poses no constraints to the number of spatial dimensions for a causal system (except being higher than one). - - - - An aerosol composed of fine solid particles in air or another gas. - SolidAerosol - SolidAerosol - An aerosol composed of fine solid particles in air or another gas. + + + + A semantic object that is connected to a conventional sign by an interpreter (a declarer) according to a specific convention. + Declared + Declared + A semantic object that is connected to a conventional sign by an interpreter (a declarer) according to a specific convention. + + + + + + + + + + + + + + + Quotient of Peltier heat power developed at a junction, and the electric current flowing from substance a to substance b. + PeltierCoefficient + PeltierCoefficient + https://qudt.org/vocab/quantitykind/PeltierCoefficient + https://www.wikidata.org/wiki/Q105801003 + 12-22 + Quotient of Peltier heat power developed at a junction, and the electric current flowing from substance a to substance b. - - - - - A colloid composed of fine solid particles or liquid droplets in air or another gas. - Aerosol - Aerosol - A colloid composed of fine solid particles or liquid droplets in air or another gas. + + + + Quantities categorised according to ISO 80000-12. + CondensedMatterPhysicsQuantity + CondensedMatterPhysicsQuantity + Quantities categorised according to ISO 80000-12. - + - - - - - - - - - - - - - - - - - - A material in which distributed particles of one phase are dispersed in a different continuous phase. - Dispersion - Dispersion - A material in which distributed particles of one phase are dispersed in a different continuous phase. + + The laboratory where the whole characterisation process or some of its stages take place. + Laboratory + Laboratory + The laboratory where the whole characterisation process or some of its stages take place. - - - - - - - - - - - - - - - - - - - - - + + + - - + + + + A whole is always defined using a criterion expressed through the classical transitive parthood relation. +This class is expected to host the definition of world objects as they appear in its wholeness, dependently on some of their parts and independently on the surroundings. + A whole is categorized as fundamental (or maximal) or redundant (non-maximal). + The superclass of entities which are defined by requiring the existence of some parts (at least one) of specifically given types, where the specified types are different with respect to the type of the whole. + Whole + Whole + The superclass of entities which are defined by requiring the existence of some parts (at least one) of specifically given types, where the specified types are different with respect to the type of the whole. + A whole is always defined using a criterion expressed through the classical transitive parthood relation. +This class is expected to host the definition of world objects as they appear in its wholeness, dependently on some of their parts and independently on the surroundings. + + + + + + + - - + + - - Process of experimentally obtaining one or more values that can reasonably be attributed to a quantity together with any other available relevant information -NOTE 1 The quantity mentioned in the definition is an individual quantity. -NOTE 2 The relevant information mentioned in the definition may be about the values obtained by the measurement, -such that some may be more representative of the measurand than others. -NOTE 3 Measurement is sometimes considered to apply to nominal properties, but not in this Vocabulary, where the -process of obtaining values of nominal properties is called “examination”. -NOTE 4 Measurement requires both experimental comparison of quantities or experimental counting of entities at -some step of the process and the use of models and calculations that are based on conceptual considerations. -NOTE 5 The conditions of reasonable attribution mentioned in the definition take into account a description of the -quantity commensurate with the intended use of a measurement result, a measurement procedure, and a calibrated -measuring system operating according to the specified measurement procedure, including the measurement -conditions. Moreover, a maximum permissible error and/or a target uncertainty may be specified, and the -measurement procedure and the measuring system should then be chosen in order not to exceed these measuring -system specifications. + + At a point on the surface separating two media with different thermodynamic temperatures, magnitude of the density of heat flow rate φ divided by the absolute value of temperature difference ΔT. + CoefficientOfHeatTransfer + ThermalTransmittance + CoefficientOfHeatTransfer + https://qudt.org/vocab/quantitykind/CoefficientOfHeatTransfer + https://www.wikidata.org/wiki/Q634340 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-39 + 5-10.1 + At a point on the surface separating two media with different thermodynamic temperatures, magnitude of the density of heat flow rate φ divided by the absolute value of temperature difference ΔT. + --- International Vocabulary of Metrology(VIM) - The measurement process associates raw data to the sample through a probe and a detector. - - CharacterisationMeasurementProcess - CharacterisationMeasurementProcess - Process of experimentally obtaining one or more values that can reasonably be attributed to a quantity together with any other available relevant information -NOTE 1 The quantity mentioned in the definition is an individual quantity. -NOTE 2 The relevant information mentioned in the definition may be about the values obtained by the measurement, -such that some may be more representative of the measurand than others. -NOTE 3 Measurement is sometimes considered to apply to nominal properties, but not in this Vocabulary, where the -process of obtaining values of nominal properties is called “examination”. -NOTE 4 Measurement requires both experimental comparison of quantities or experimental counting of entities at -some step of the process and the use of models and calculations that are based on conceptual considerations. -NOTE 5 The conditions of reasonable attribution mentioned in the definition take into account a description of the -quantity commensurate with the intended use of a measurement result, a measurement procedure, and a calibrated -measuring system operating according to the specified measurement procedure, including the measurement -conditions. Moreover, a maximum permissible error and/or a target uncertainty may be specified, and the -measurement procedure and the measuring system should then be chosen in order not to exceed these measuring -system specifications. + + + + Quantities categorised according to ISO 80000-5. + ThermodynamicalQuantity + ThermodynamicalQuantity + Quantities categorised according to ISO 80000-5. + --- International Vocabulary of Metrology(VIM) - The measurement process associates raw data to the sample through a probe and a detector. - Measurement + + + + + Maximum kinetic energy of the emitted beta particle produced in the nuclear disintegration process. + MaximumBetaParticleEnergy + MaximumBetaParticleEnergy + https://qudt.org/vocab/quantitykind/MaximumBeta-ParticleEnergy + https://www.wikidata.org/wiki/Q98148038 + 10-33 + Maximum kinetic energy of the emitted beta particle produced in the nuclear disintegration process. - - - - - - - - - - - - - - - + + + + + - - + + - - A measurement always implies a causal interaction between the object and the observer. - A measurement is the process of experimentally obtaining one or more measurement results that can reasonably be attributed to a quantity. - An 'observation' that results in a quantitative comparison of a 'property' of an 'object' with a standard reference based on a well defined mesurement procedure. - Measurement - Measurement - An 'observation' that results in a quantitative comparison of a 'property' of an 'object' with a standard reference based on a well defined mesurement procedure. - measurement + + A property of objects which can be transferred to other objects or converted into different forms. + Energy is often defined as "ability of a system to perform work", but it might be misleading since is not necessarily available to do work. + Energy + Energy + http://qudt.org/vocab/quantitykind/Energy + 5-20-1 + A property of objects which can be transferred to other objects or converted into different forms. + https://doi.org/10.1351/goldbook.E02101 - - - - Characterisation procedure may refer to the full characterisation process or just a part of the full process. - The process of performing characterisation by following some existing formalised operative rules. - - CharacterisationProcedure - CharacterisationProcedure - The process of performing characterisation by following some existing formalised operative rules. - Sample preparation -Sample inspection -Calibration -Microscopy -Viscometry -Data sampling - Characterisation procedure may refer to the full characterisation process or just a part of the full process. + + + + Quantities categorised according to ISO 80000-10. + AtomicAndNuclearPhysicsQuantity + AtomicAndNuclearPhysicsQuantity + Quantities categorised according to ISO 80000-10. + + + + + + + Vector k in the expression ω t−k⋅r+ϑ0 of the phase of a sinusoidal wave. + WaveVector + WaveVector + https://www.wikidata.org/wiki/Q657009 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-10-09 + 3-21 + Vector k in the expression ω t−k⋅r+ϑ0 of the phase of a sinusoidal wave. + https://en.wikipedia.org/wiki/Wave_vector + + + + + + Quantities categorised according to ISO 80000-3. + SpaceAndTimeQuantity + SpaceAndTimeQuantity + Quantities categorised according to ISO 80000-3. + + + + + + + + + + + + + + The inverse of length. + ReciprocalLength + InverseLength + ReciprocalLength + http://qudt.org/vocab/quantitykind/InverseLength + The inverse of length. + https://en.wikipedia.org/wiki/Reciprocal_length - + - + - + - Parameter in the expression for the thermionic emission current density J for a metal in terms of the thermodynamic temperature T and work function. - RichardsonConstant - RichardsonConstant - https://qudt.org/vocab/quantitykind/RichardsonConstant - https://www.wikidata.org/wiki/Q105883079 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-06-30 - 12-26 - Parameter in the expression for the thermionic emission current density J for a metal in terms of the thermodynamic temperature T and work function. + Change of pressure per change of temperature at constant volume. + PressureCoefficient + PressureCoefficient + https://qudt.org/vocab/quantitykind/PressureCoefficient + https://www.wikidata.org/wiki/Q74762732 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-29 + 5-4 + Change of pressure per change of temperature at constant volume. - + + + + + constituent of the interaction energy between the spins of adjacent electrons in matter arising from the overlap of electron state functions + ExchangeIntegral + ExchangeIntegral + https://qudt.org/vocab/quantitykind/ExchangeIntegral + https://www.wikidata.org/wiki/Q10882959 + 12-34 + constituent of the interaction energy between the spins of adjacent electrons in matter arising from the overlap of electron state functions + + + - - - T-1 L0 M-1 I0 Θ0 N0 J0 - + + + + + + - + + + Semiotics + Semiotics + + + + + + The class of causal objects that stand for world objects according to a specific representational perspective. + This class is the practical implementation of the EMMO pluralistic approach for which the only objective categorization is provided by the Universe individual and all the Quantum individuals. +Between these two extremes, there are several subjective ways to categorize real world objects, each one provide under a 'Perspective' subclass. + Perspective + Perspective + The class of causal objects that stand for world objects according to a specific representational perspective. + This class is the practical implementation of the EMMO pluralistic approach for which the only objective categorization is provided by the Universe individual and all the Quantum individuals. +Between these two extremes, there are several subjective ways to categorize real world objects, each one provide under a 'Perspective' subclass. + + + + - PerTimeMassUnit - PerTimeMassUnit + Product of force and displacement. + Work + Work + http://qudt.org/vocab/quantitykind/Work + Product of force and displacement. + 4-28.4 + https://doi.org/10.1351/goldbook.W06684 - - - + + + + All or part of the programs, procedures, rules, and associated documentation of an information processing system. + Software is usually used as a generic term for programs. However, in its broadest sense it can refer to all information (i.e., both programs and data) in electronic form and can provide a distinction from hardware, which refers to computers or other electronic systems on which software can exist and be use. +Here we explicitly include in the definition also all the data (e.g. source code, script files) that takes part to the building of the executable, are necessary to the execution of a program or that document it for the users. + Software + Software + All or part of the programs, procedures, rules, and associated documentation of an information processing system. + Software is usually used as a generic term for programs. However, in its broadest sense it can refer to all information (i.e., both programs and data) in electronic form and can provide a distinction from hardware, which refers to computers or other electronic systems on which software can exist and be use. +Here we explicitly include in the definition also all the data (e.g. source code, script files) that takes part to the building of the executable, are necessary to the execution of a program or that document it for the users. + + + + - The DBpedia and UIPAC Gold Book definitions (http://dbpedia.org/page/Vacuum_permeability, https://doi.org/10.1351/goldbook.P04504) are outdated since May 20, 2019. It is now a measured constant. - The value of magnetic permeability in a classical vacuum. - VacuumMagneticPermeability - PermeabilityOfVacuum - VacuumMagneticPermeability - http://qudt.org/vocab/constant/ElectromagneticPermeabilityOfVacuum - 6-26.1 + Atomic quantum number related to the z component lz, jz or sz, of the orbital, total, or spin angular momentum. + MagneticQuantumNumber + MagneticQuantumNumber + https://qudt.org/vocab/quantitykind/MagneticQuantumNumber + https://www.wikidata.org/wiki/Q2009727 + 10-13.4 + Atomic quantum number related to the z component lz, jz or sz, of the orbital, total, or spin angular momentum. - - - - - - - - - - - - + + + - Measure for how the magnetization of material is affected by the application of an external magnetic field . - Permeability - ElectromagneticPermeability - Permeability - http://qudt.org/vocab/quantitykind/ElectromagneticPermeability - 6-26.2 - https://doi.org/10.1351/goldbook.P04503 + Number describing a particular state of a quantum system. + QuantumNumber + QuantumNumber + https://qudt.org/vocab/quantitykind/QuantumNumber + https://www.wikidata.org/wiki/Q232431 + 10-13.1 + Number describing a particular state of a quantum system. - - - - A physics based simulation with multiple physics based models. - MultiSimulation - MultiSimulation - A physics based simulation with multiple physics based models. + + + + + + + + + + + + + CompositeBoson + CompositeBoson + Examples of composite particles with integer spin: +spin 0: H1 and He4 in ground state, pion +spin 1: H1 and He4 in first excited state, meson +spin 2: O15 in ground state. - - - - A simulation that relies on physics based models, according to the Review of Materials Modelling and CWA 17284:2018. - CEN Workshop Agreement – CWA 17284 “Materials modelling – terminology, classification and metadata” - PhysicsBasedSimulation - PhysicsBasedSimulation - A simulation that relies on physics based models, according to the Review of Materials Modelling and CWA 17284:2018. + + + + + + + + + + + + + + + + A composite particle is a bound state of elementary particles for which it is still possible to define its bosonic or fermionic behaviour. + CompositePhysicalParticle + CompositePhysicalParticle + A composite particle is a bound state of elementary particles for which it is still possible to define its bosonic or fermionic behaviour. - - - - A function solution of a physics equation that provides a methods for the prediction of some quantitiative properties of an object. - This must be a mathematical function v(t), x(t). -A dataset as solution is a conventional sign. - PhysicsEquationSolution - PhysicsEquationSolution - A function solution of a physics equation that provides a methods for the prediction of some quantitiative properties of an object. - A parabolic function is a prediction of the trajectory of a falling object in a gravitational field. While it has predictive capabilities it lacks of an analogical character, since it does not show the law behind that trajectory. + + + + + + + + + + + + + + + A physical particle with integer spin that follows Bose–Einstein statistics. + Boson + Boson + A physical particle with integer spin that follows Bose–Einstein statistics. + https://en.wikipedia.org/wiki/Boson - - - - The class of general mathematical symbolic objects respecting mathematical syntactic rules. - A mathematical object in this branch is not representing a concept but an actual graphical object built using mathematcal symbols arranged in some way, according to math conventions. - Mathematical - Mathematical - The class of general mathematical symbolic objects respecting mathematical syntactic rules. + + + + + + + + + + + + + + A causal object that is direct part of a tessellation. + Tile + Tile + A causal object that is direct part of a tessellation. - + - - - Thickness of the attenuating layer that reduces the quantity of interest of a unidirectional beam of infinitesimal width to half of its initial value. - HalfValueThickness - HalfValueThickness - https://qudt.org/vocab/quantitykind/Half-ValueThickness - https://www.wikidata.org/wiki/Q127526 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-04-34 - 10-53 - Thickness of the attenuating layer that reduces the quantity of interest of a unidirectional beam of infinitesimal width to half of its initial value. - - - - + - Shortest distance between two surfaces limiting a layer, when this distance can be considered to be constant over a region of a finite size. - Thickness - Thickness - https://www.wikidata.org/wiki/Q3589038 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-01-24 - 3-1.4 - Shortest distance between two surfaces limiting a layer, when this distance can be considered to be constant over a region of a finite size. + Proportionality constant between the particle current density J and the gradient of the particle number density n. + DiffusionCoefficientForParticleNumberDensity + DiffusionCoefficientForParticleNumberDensity + https://www.wikidata.org/wiki/Q98875545 + 10-64 + Proportionality constant between the particle current density J and the gradient of the particle number density n. - - - - + + + + + + + + + + + - The abstract notion of angle. - AngularMeasure - AngularMeasure - https://qudt.org/vocab/quantitykind/Angle - https://www.wikidata.org/wiki/Q1357788 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=102-04-14 - 3-5 - The abstract notion of angle. - https://doi.org/10.1351/goldbook.A00346 + Proportionality constant in some physical laws. + DiffusionCoefficient + DiffusionCoefficient + Proportionality constant in some physical laws. - - + + + + + + + + + + + - Ratio of circular arc length to radius. - Angle - PlaneAngle - Angle - http://qudt.org/vocab/quantitykind/PlaneAngle - Ratio of circular arc length to radius. - 3-5 - https://doi.org/10.1351/goldbook.A00346 - - - - - - The environmental scanning electron microscope (ESEM) is a scanning electron microscope (SEM) that allows for the option of collecting electron micrographs of specimens that are wet, uncoated, or both by allowing for a gaseous environment in the specimen chamber. - - EnvironmentalScanningElectronMicroscopy - EnvironmentalScanningElectronMicroscopy - The environmental scanning electron microscope (ESEM) is a scanning electron microscope (SEM) that allows for the option of collecting electron micrographs of specimens that are wet, uncoated, or both by allowing for a gaseous environment in the specimen chamber. + at a given point on a two-dimensional domain of quasi-infinitesimal area dA, scalar quantity equal to the mass dm within the domain divided by the area dA, thus ρA = dm/dA. + SurfaceMassDensity + AreicMass + SurfaceDensity + SurfaceMassDensity + https://www.wikidata.org/wiki/Q1907514 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-10 + 4-5 + at a given point on a two-dimensional domain of quasi-infinitesimal area dA, scalar quantity equal to the mass dm within the domain divided by the area dA, thus ρA = dm/dA. + https://doi.org/10.1351/goldbook.S06167 - - - + + - Energy of the electron in a hydrogen atom in its ground state - HartreeEnergy - HartreeEnergy - https://qudt.org/vocab/unit/E_h.html - https://www.wikidata.org/wiki/Q476572 - https://dbpedia.org/page/Hartree - 10-8 - Energy of the electron in a hydrogen atom in its ground state - https://en.wikipedia.org/wiki/Hartree - https://doi.org/10.1351/goldbook.H02748 - - - - - - A system of independent elements that are assembled together to perform a function. - Assembled - Assembled - A system of independent elements that are assembled together to perform a function. - - - - - - A system which is mainly characterised by the spatial configuration of its elements. - HolisticArrangement - HolisticArrangement - A system which is mainly characterised by the spatial configuration of its elements. + Quantities categorised according to ISO 80000-4. + MechanicalQuantity + MechanicalQuantity + Quantities categorised according to ISO 80000-4. - - - - Coulometry used to measure the amount of substance is a primary reference measurement procedure [VIM 2.8] not requiring calibration with a standard for a quantity of the same kind (i.e. amount of substance). - The coulometric experiment can be carried out at controlled (constant) potential (see direct coulometry at controlled potential) or controlled (constant) current (see direct coulometry at controlled current). - electrochemical measurement principle in which the electric charge required to carry out a known electrochemical reaction is measured. By Faraday’s laws of electrolysis, the amount of substance is proportional to the charge - - Coulometry - Coulometry - https://www.wikidata.org/wiki/Q1136979 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-04-13 - electrochemical measurement principle in which the electric charge required to carry out a known electrochemical reaction is measured. By Faraday’s laws of electrolysis, the amount of substance is proportional to the charge - https://en.wikipedia.org/wiki/Coulometry - https://doi.org/10.1515/pac-2018-0109 + + + + + + + + + + + + + + + A CausalSystem whose quantum parts are all bonded to the rest of the system. + It is natural to define entities made or more than one smaller parts according to some unity criteria. One of the most general one applicable to causal systems is to ask that all the quantum parts of the system are bonded to the rest. +In other words, causal convexity excludes all quantums that leave the system (no more interacting), or that are not yet part of it (not yet interacting). +So, a photon leaving a body is not part of the body as convex system, while a photon the is carrier of electromagnetic interaction between two molecular parts of the body, is part of the convex body. + PhysicalObject + PhysicalObject + A CausalSystem whose quantum parts are all bonded to the rest of the system. + It is natural to define entities made or more than one smaller parts according to some unity criteria. One of the most general one applicable to causal systems is to ask that all the quantum parts of the system are bonded to the rest. +In other words, causal convexity excludes all quantums that leave the system (no more interacting), or that are not yet part of it (not yet interacting). +So, a photon leaving a body is not part of the body as convex system, while a photon the is carrier of electromagnetic interaction between two molecular parts of the body, is part of the convex body. - - - - In electrochemical characterization, the measurement of potential, charge, or current is used to determine an analyte's concentration or to characterize an analyte's chemical reactivity - - ElectrochemicalTesting - http://dx.doi.org/10.1016/B978-0-323-46140-5.00002-9 - ElectrochemicalTesting - In electrochemical characterization, the measurement of potential, charge, or current is used to determine an analyte's concentration or to characterize an analyte's chemical reactivity + + + + + + + + + + + + + + + PhysicallyInteractingConvex + PhysicallyInteractingConvex - + - T-2 L+4 M0 I0 Θ0 N0 J0 + T-1 L0 M0 I0 Θ0 N0 J0 - MassStoppingPowerUnit - MassStoppingPowerUnit + FrequencyUnit + FrequencyUnit - - - - MetallicPowderSintering - MetallicPowderSintering + + + + + + + + + + + + + + A procedure that is an hoilistic part of a workflow. + A task is a generic part of a workflow, without taking care of the task granularities. +It means that you can declare that e.g. tightening a bolt is a task of building an airplane, without caring of the coarser tasks to which this tightening belongs. + Task + Job + Task + A procedure that is an hoilistic part of a workflow. + A task is a generic part of a workflow, without taking care of the task granularities. +It means that you can declare that e.g. tightening a bolt is a task of building an airplane, without caring of the coarser tasks to which this tightening belongs. - - - - Sintering is the process of forming a solid mass of material through heat and pressure without melting to the point of liquefaction. This process involves the atoms in materials diffusing across the particle boundaries and fusing together into one piece. - Sintering occurs naturally in mineral deposits, and is used as a manufacturing process for materials including ceramics, metals and plastics. -Because the sintering temperature doesn’t reach the materials’ melting point, it is often used for materials with high melting points, such as molybdenum and tungsten. - Sintering - ISO 3252:2019 Powder metallurgy -sintering: thermal treatment of a powder or compact, at a temperature below the melting point of the main constituent, for the purpose of increasing its strength by the metallurgical bonding of its particles - ISO/ASTM TR 52906:2022 Additive manufacturing -sintering: process of heating a powder metal compact to increase density and/or improve mechanical properties via solid state diffusion - https://www.twi-global.com/technical-knowledge/faqs/what-is-sintering - Sintern - Sintering - Sintering is the process of forming a solid mass of material through heat and pressure without melting to the point of liquefaction. This process involves the atoms in materials diffusing across the particle boundaries and fusing together into one piece. - Sintering occurs naturally in mineral deposits, and is used as a manufacturing process for materials including ceramics, metals and plastics. -Because the sintering temperature doesn’t reach the materials’ melting point, it is often used for materials with high melting points, such as molybdenum and tungsten. + + + + A procedure can be considered as an intentional process with a plan. + The process in which an agent works with some entities according to some existing formalised operative rules. + The set of established forms or methods of an organized body for accomplishing a certain task or tasks (Wiktionary). + Procedure + Elaboration + Work + Procedure + The set of established forms or methods of an organized body for accomplishing a certain task or tasks (Wiktionary). + The process in which an agent works with some entities according to some existing formalised operative rules. + The process in which a control unit of a CPU (the agent) orchestrates some cached binary data according to a list of instructions (e.g. a program). +The process in which a librarian order books alphabetically on a shelf. +The execution of an algorithm. + A procedure can be considered as an intentional process with a plan. - - - - - T0 L+1 M0 I0 Θ0 N0 J0 - - - + + - LengthUnit - LengthUnit - - - - - - - TauAntiNeutrino - TauAntiNeutrino + Average power over a period. + ActivePower + ActivePower + https://qudt.org/vocab/quantitykind/ActivePower + https://www.wikidata.org/wiki/Q20820042 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-11-42 + 6-56 + Average power over a period. - - + + + + + + - - - 1 + + + + Rate of transfer of energy per unit time. + Power + Power + http://qudt.org/vocab/quantitykind/Power + 4-27 + 6-45 + Rate of transfer of energy per unit time. + https://doi.org/10.1351/goldbook.P04792 + + + + + + + - - - 1 + + - - A measurement unit that is made of a metric prefix and a unit symbol. - PrefixedUnit - PrefixedUnit - A measurement unit that is made of a metric prefix and a unit symbol. + + inverse of the mass density ρ, thus v = 1/ρ. + SpecificVolume + MassicVolume + SpecificVolume + https://qudt.org/vocab/quantitykind/SpecificVolume + https://www.wikidata.org/wiki/Q683556 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-09 + 4-3 + inverse of the mass density ρ, thus v = 1/ρ. + https://doi.org/10.1351/goldbook.S05807 - - - - - - - - - - - + + + - + - - + + + + + + + - - A symbol that stands for a single unit. - UnitSymbol - UnitSymbol - A symbol that stands for a single unit. - Some examples are "Pa", "m" and "J". - - - - - - FromWorkPIecetoWorkPiece - FromWorkPIecetoWorkPiece - - - - - - A manufacturing in which it is formed a solid body with its shape from shapeless original material parts, whose cohesion is created during the process. - WorkpieceForming - ArchetypeForming - PrimitiveForming - WorkpieceForming - - - - - - - - - - - - - - - - - - - - - - - - - A symbol that stands for a concept in the language of the meterological domain of ISO 80000. - MetrologicalSymbol - MetrologicalSymbol - A symbol that stands for a concept in the language of the meterological domain of ISO 80000. + + CharmAntiQuark + CharmAntiQuark - + - - + + + + + + + + - - - A measurement unit symbol that do not have a metric prefix as a direct spatial part. - NonPrefixedUnit - NonPrefixedUnit - A measurement unit symbol that do not have a metric prefix as a direct spatial part. + + + SecondGenerationFermion + SecondGenerationFermion - - - - - T-1 L0 M0 I0 Θ+2 N0 J0 - - - + + + + + + + + + + + + + + + + + + + + UpAntiQuarkType + UpAntiQuarkType + + + + + - SquareTemperaturePerTimeUnit - SquareTemperaturePerTimeUnit + The rest mass of an electron. + ElectronMass + ElectronMass + http://qudt.org/vocab/constant/ElectronMass + https://doi.org/10.1351/goldbook.E02008 - - + + + + For a given unit system, measured constants are physical constants that are not used to define the unit system. Hence, these constants have to be measured and will therefore be associated with an uncertainty. + MeasuredConstant + MeasuredConstant + For a given unit system, measured constants are physical constants that are not used to define the unit system. Hence, these constants have to be measured and will therefore be associated with an uncertainty. + + + + + + - + + + + + + + + + + + - Energy per unit change in amount of substance. - ChemicalPotential - ChemicalPotential - http://qudt.org/vocab/quantitykind/ChemicalPotential - 9-17 - https://doi.org/10.1351/goldbook.C01032 + Property of a physical body that express its resistance to acceleration (a change in its state of motion) when a force is applied. + Mass + Mass + http://qudt.org/vocab/quantitykind/Mass + 4-1 + Property of a physical body that express its resistance to acceleration (a change in its state of motion) when a force is applied. + https://doi.org/10.1351/goldbook.M03709 - + - + - + - Mechanical property of linear elastic solid materials. - ModulusOfElasticity - YoungsModulus - ModulusOfElasticity - https://www.wikidata.org/wiki/Q2091584 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-67 - 4-19.1 - Mechanical property of linear elastic solid materials. - https://doi.org/10.1351/goldbook.M03966 + At a given point within a domain of quasi-infinitesimal volume V, vector quantity equal to the magnetic area moment m of the substance contained within the domain divided by the volume V. + Magnetization + Magnetization + https://qudt.org/vocab/quantitykind/Magnetization + https://www.wikidata.org/wiki/Q856711 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-52 + 6-24 + At a given point within a domain of quasi-infinitesimal volume V, vector quantity equal to the magnetic area moment m of the substance contained within the domain divided by the volume V. - - - - - An application aimed to functionally reproduce an object. - SimulationApplication - SimulationApplication - An application aimed to functionally reproduce an object. - An application that predicts the pressure drop of a fluid in a pipe segment is aimed to functionally reproduce the outcome of a measurement of pressure before and after the segment. + + + + Quantities categorised according to ISO 80000-6. + ElectromagneticQuantity + ElectromagneticQuantity + Quantities categorised according to ISO 80000-6. - - - - A program aimed to provide a specific high level function to the user, usually hiding lower level procedures. - ApplicationProgram - App - Application - ApplicationProgram - A program aimed to provide a specific high level function to the user, usually hiding lower level procedures. - Word processors, graphic image processing programs, database management systems, numerical simulation software and games. + + + + CausallHairedSystem + CausallHairedSystem - - - - An icon that focusing WHAT the object does. - An icon that imitates one representative character of the object. It share external similarities with the object, but not necessarily the same internal logical structure. - This subclass of icon inspired by Peirceian category (c) the metaphor, which represents the representative character of a sign by representing a parallelism in something else. - FunctionalIcon - FunctionalIcon - An icon that imitates one representative character of the object. It share external similarities with the object, but not necessarily the same internal logical structure. - A data based model is only a functional icon, since it provide the same relations between the properties of the object (e.g., it can predict some properties as function of others) but is not considering the internal mechanisms (i.e., it can ignore the physics). - A guinea pig. - An icon that focusing WHAT the object does. + + + + + T+3 L-2 M-1 I+1 Θ0 N0 J0 + + + + + ElectricCurrentPerUnitEnergyUnit + ElectricCurrentPerUnitEnergyUnit - - - + + - In an infinite medium, the ratio of the mean number of neutrons produced by fission due to neutrons of all energies to the mean number of neutrons produced by fissions due to thermal neutrons only. - FastFissionFactor - FastFissionFactor - https://qudt.org/vocab/quantitykind/FastFissionFactor - https://www.wikidata.org/wiki/Q99197493 - 10-75 - In an infinite medium, the ratio of the mean number of neutrons produced by fission due to neutrons of all energies to the mean number of neutrons produced by fissions due to thermal neutrons only. + Characteristic quantum number s of a particle, related to its spin. + SpinQuantumNumber + SpinQuantumNumber + https://qudt.org/vocab/quantitykind/SpinQuantumNumber + https://www.wikidata.org/wiki/Q3879445 + 10-13.5 + Characteristic quantum number s of a particle, related to its spin. - - - - - Direct output of the equipment with the manufacturer’s software including automatic pre-processing that is not modified by the user once the acquisition method is defined and the equipment calibrated. - In some cases, raw data can be considered to have already some level of data processing, e.g., in electron microscopy a “raw image” that is formed on the screen is already result from multiple processing after the signal is acquired by the detector. - - RawData - RawData - Direct output of the equipment with the manufacturer’s software including automatic pre-processing that is not modified by the user once the acquisition method is defined and the equipment calibrated. - The raw data is a set of (unprocessed) data that is given directly as output from the detector, usually expressed as a function of time or position, or photon energy. - In mechanical testing, examples of raw data are raw-force, raw-displacement, coordinates as function of time. - In spectroscopic testing, the raw data are light intensity, or refractive index, or optical absorption as a function of the energy (or wavelength) of the incident light beam. - In some cases, raw data can be considered to have already some level of data processing, e.g., in electron microscopy a “raw image” that is formed on the screen is already result from multiple processing after the signal is acquired by the detector. + + + + + T0 L-1 M0 I0 Θ-1 N0 J0 + + + + + PerLengthTemperatureUnit + PerLengthTemperatureUnit - - - + + + + + + + + + + - - + + + 1 + + + + + + + + + + + - A measurement result generally contains “relevant information” about the set of measured quantity properties, such that some may be more representative of the measured quantity than others. This may be expressed in the form of a probability density function (pdf). - Result of a measurement. - -A set of quantites being attributed to a measurand (measured quantitative property) together with any other available relevant information, like measurement uncertainty. + A quantifiable property of a phenomenon, body, or substance. + VIM defines a quantity as a "property of a phenomenon, body, or substance, where the property has a magnitude that can be expressed as a number and a reference". --- VIM - MeasurementResult - MeasurementResult - Result of a measurement. +A quantity in EMMO is a property and therefore only addresses the first part of the VIM definition (that is a property of a phenomenon, body, or substance). The second part (that it can be expressed as a number and a reference) is syntactic and addressed by emmo:QuantityValue. + Quantity + Measurand + Quantity + https://qudt.org/schema/qudt/Quantity + A quantifiable property of a phenomenon, body, or substance. + length +Rockwell C hardness +electric resistance + measurand + quantity + VIM defines a quantity as a "property of a phenomenon, body, or substance, where the property has a magnitude that can be expressed as a number and a reference". -A set of quantites being attributed to a measurand (measured quantitative property) together with any other available relevant information, like measurement uncertainty. +A quantity in EMMO is a property and therefore only addresses the first part of the VIM definition (that is a property of a phenomenon, body, or substance). The second part (that it can be expressed as a number and a reference) is syntactic and addressed by emmo:QuantityValue. + --- VIM - measurement result - A measurement result generally contains “relevant information” about the set of measured quantity properties, such that some may be more representative of the measured quantity than others. This may be expressed in the form of a probability density function (pdf). - A measurement result has the measured quantity, measurement uncertainty and other relevant attributes as holistic parts. + + + + + + + + + + + + + A reference can be a measurement unit, a measurement procedure, a reference material, or a combination of such (VIM3 1.1 NOTE 2). + A symbolic is recognized as reference unit also if it is not part of a quantity (e.g. as in the sentence "the Bq is the reference unit of Becquerel"). +For this reason we can't declare the axiom: +MetrologicalReference SubClassOf: inverse(hasMetrologicalReference) some Quantity +because there exist reference units without being part of a quantity. +This is peculiar to EMMO, where quantities as syntatic entities (explicit quantities) are distinct with quantities as semantic entities (properties). + MetrologicalReference + MetrologicalReference + A reference can be a measurement unit, a measurement procedure, a reference material, or a combination of such (VIM3 1.1 NOTE 2). + A symbolic is recognized as reference unit also if it is not part of a quantity (e.g. as in the sentence "the Bq is the reference unit of Becquerel"). +For this reason we can't declare the axiom: +MetrologicalReference SubClassOf: inverse(hasMetrologicalReference) some Quantity +because there exist reference units without being part of a quantity. +This is peculiar to EMMO, where quantities as syntatic entities (explicit quantities) are distinct with quantities as semantic entities (properties). - - - - Represents every type of data that is produced during a characterisation process - CharacterisationData - CharacterisationData - Represents every type of data that is produced during a characterisation process + + + + + Mean duration required for the decay of one half of the atoms or nuclei. + HalfLife + HalfLife + https://qudt.org/vocab/quantitykind/Half-Life + https://www.wikidata.org/wiki/Q98118544 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-12 + 10-31 + Mean duration required for the decay of one half of the atoms or nuclei. - - - - - - - - - - - - - - A set of units that correspond to the base quantities in a system of units. - BaseUnit - BaseUnit - A set of units that correspond to the base quantities in a system of units. - base unit + + + + Physical quantity for describing the temporal distance between events. + Duration + Duration + https://www.wikidata.org/wiki/Q2199864 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-01-13 + 3-9 + Physical quantity for describing the temporal distance between events. - - + + + - Given an electric current in a thin conducting loop and the linked flux caused by that electric current in another loop, the mutual inductance of the two loops is the linked flux divided by the electric current. - MutualInductance - MutualInductance - https://www.wikidata.org/wiki/Q78101401 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-36 - 6-41.2 - Given an electric current in a thin conducting loop and the linked flux caused by that electric current in another loop, the mutual inductance of the two loops is the linked flux divided by the electric current. - https://doi.org/10.1351/goldbook.M04076 + Quantity characterizing the deviation of a solvent from ideal behavior. + OsmoticCoefficientOfSolvent + OsmoticFactorOfSolvent + OsmoticCoefficientOfSolvent + https://qudt.org/vocab/quantitykind/OsmoticCoefficient + https://www.wikidata.org/wiki/Q5776102 + 9-27.2 + Quantity characterizing the deviation of a solvent from ideal behavior. + https://doi.org/10.1351/goldbook.O04342 - + - - - + + - A property of an electrical conductor by which a change in current through it induces an electromotive force in both the conductor itself and in any nearby conductors by mutual inductance. - ElectricInductance - Inductance - ElectricInductance - http://qudt.org/vocab/quantitykind/Inductance - https://www.wikidata.org/wiki/Q177897 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-19 - 6-41.1 - A property of an electrical conductor by which a change in current through it induces an electromotive force in both the conductor itself and in any nearby conductors by mutual inductance. - https://doi.org/10.1351/goldbook.M04076 + A quantity to which no physical dimension is assigned and with a corresponding unit of measurement in the SI of the unit one. + ISQDimensionlessQuantity + ISQDimensionlessQuantity + http://qudt.org/vocab/quantitykind/Dimensionless + A quantity to which no physical dimension is assigned and with a corresponding unit of measurement in the SI of the unit one. + https://en.wikipedia.org/wiki/Dimensionless_quantity + https://doi.org/10.1351/goldbook.D01742 - - - - - - - - - - - - - Vector quantity obtained at a given point by adding the electric polarization P to the product of the electric field strength E and the electric constant ε0. - ElectricFluxDensity - ElectricDisplacement - ElectricFluxDensity - https://qudt.org/vocab/quantitykind/ElectricDisplacementField - https://www.wikidata.org/wiki/Q371907 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-40 - 6-12 - Vector quantity obtained at a given point by adding the electric polarization P to the product of the electric field strength E and the electric constant ε0. + + + + Data that are decoded retaining its continuous variations characteristic. + The fact that there may be a finite granularity in the variations of the material basis (e.g. the smallest peak in a vynil that can be recognized by the piezo-electric transducer) does not prevent a data to be analog. It means only that the focus on such data encoding is on a scale that makes such variations negligible, making them practically a continuum. + AnalogData + AnalogData + Data that are decoded retaining its continuous variations characteristic. + A vynil contain continuous information about the recorded sound. + The fact that there may be a finite granularity in the variations of the material basis (e.g. the smallest peak in a vynil that can be recognized by the piezo-electric transducer) does not prevent a data to be analog. It means only that the focus on such data encoding is on a scale that makes such variations negligible, making them practically a continuum. - + - - - - + + + + - - - - - - - - - - A characterisation procedure that has at least two characterisation tasks as proper parts. - - CharacterisationWorkflow - CharacterisationWorkflow - A characterisation procedure that has at least two characterisation tasks as proper parts. - - - - - - - + + + + - - - - - - - - - - - - - - - CharacterisationTask - CharacterisationTask - - - - - - T-2 L-1 M+1 I0 Θ-1 N0 J0 - + + + + + + - - - PressurePerTemperatureUnit - PressurePerTemperatureUnit - - - - - - A meson with spin zero and even parity. - ScalarMeson - ScalarMeson - A meson with spin zero and even parity. - https://en.wikipedia.org/wiki/Scalar_meson - - - - - - - - + + - - - + + + A causal object whose properties variation are encoded by an agent and that can be decoded by another agent according to a specific rule. + Variations in data are generated by an agent (not necessarily human) and are intended to be decoded by the same or another agent using the same encoding rules. +Data are always generated by an agent but not necessarily possess a semantic meaninig, either because it's lost or unknown or because simply they possess none (e.g. a random generation of symbols). +A data object may be used as the physical basis for a sign, under Semiotics perspective. + We call "decoding" the act of recognise the variation according to a particular rule and generate another equivalent schema (e.g. in the agent's cognitive apparatus, as another form of data). +We call "interpreting" the act of providing semantic meaning to data, which is covered by the semiotic perspective. + EncodedData + EncodedVariation + EncodedData + A causal object whose properties variation are encoded by an agent and that can be decoded by another agent according to a specific rule. + A Radio Morse Code transmission can be addressed by combination of perspectives. + +Physicalistic: the electromagnetic pulses can be defined as individual A (of type Field) and the strip of paper coming out a printer receiver can be defined as individual B (of type Matter). +Data: both A and B are also DiscreteData class individuals. In particular they may belong to a MorseData class, subclass of DiscreteData. +Perceptual: B is an individual belonging to the graphical entities expressing symbols. In particular is a formula under the MorseLanguage class, made of a combination of . and - symbols. +Semiotics: A and B can be signs if they refers to something else (e.g. a report about a fact, names). + A signal through a cable. A sound wave. Words on a page. The pattern of excited states within a computer RAM. + We call "decoding" the act of recognise the variation according to a particular rule and generate another equivalent schema (e.g. in the agent's cognitive apparatus, as another form of data). +We call "interpreting" the act of providing semantic meaning to data, which is covered by the semiotic perspective. + https://no.wikipedia.org/wiki/Data + + + + + + A real bond between atoms is always something hybrid between covalent, metallic and ionic. + +In general, metallic and ionic bonds have atoms sharing electrons. + An bonded atom that shares at least one electron to the atom-based entity of which is part of. + The bond types that are covered by this definition are the strong electonic bonds: covalent, metallic and ionic. + This class can be used to represent molecules as simplified quantum systems, in which outer molecule shared electrons are un-entangled with the inner shells of the atoms composing the molecule. + BondedAtom + BondedAtom + An bonded atom that shares at least one electron to the atom-based entity of which is part of. + + + + - - + + - - Hadronic subatomic particles composed of an equal number of quarks and antiquarks bound together by strong interactions. - Most mesons are composed of one quark and one antiquark. - Meson - Meson - Hadronic subatomic particles composed of an equal number of quarks and antiquarks bound together by strong interactions. - Most mesons are composed of one quark and one antiquark. - https://en.wikipedia.org/wiki/Meson - + + + + + + + + A standalone atom has direct part one 'nucleus' and one 'electron_cloud'. - - - - - Maximum kinetic energy of the emitted beta particle produced in the nuclear disintegration process. - MaximumBetaParticleEnergy - MaximumBetaParticleEnergy - https://qudt.org/vocab/quantitykind/MaximumBeta-ParticleEnergy - https://www.wikidata.org/wiki/Q98148038 - 10-33 - Maximum kinetic energy of the emitted beta particle produced in the nuclear disintegration process. - +An O 'atom' within an O₂ 'molecule' is an 'e-bonded_atom'. + +In this material branch, H atom is a particular case, with respect to higher atomic number atoms, since as soon as it shares its electron it has no nucleus entangled electron cloud. + +We cannot say that H₂ molecule has direct part two H atoms, but has direct part two H nucleus. + An 'atom' is a 'nucleus' surrounded by an 'electron_cloud', i.e. a quantum system made of one or more bounded electrons. + Atom + ChemicalElement + Atom + A standalone atom has direct part one 'nucleus' and one 'electron_cloud'. - - - - Java - Java +An O 'atom' within an O₂ 'molecule' is an 'e-bonded_atom'. + +In this material branch, H atom is a particular case, with respect to higher atomic number atoms, since as soon as it shares its electron it has no nucleus entangled electron cloud. + +We cannot say that H₂ molecule has direct part two H atoms, but has direct part two H nucleus. + An 'atom' is a 'nucleus' surrounded by an 'electron_cloud', i.e. a quantum system made of one or more bounded electrons. - - - - CompiledLanguage - CompiledLanguage + + + + Whatever hardware is used during the characterisation process. + CharacterisationHardware + CharacterisationHardware + Whatever hardware is used during the characterisation process. - - - - - Square root of the migration area, M^2. - MigrationLength - MigrationLength - https://qudt.org/vocab/quantitykind/MigrationLength - https://www.wikidata.org/wiki/Q98998318 - 10-73.3 - Square root of the migration area, M^2. + + + + + BlueCharmAntiQuark + BlueCharmAntiQuark - - - + + - - + - Extend of a spatial dimension. - Length is a non-negative additive quantity attributed to a one-dimensional object in space. - Length - Length - http://qudt.org/vocab/quantitykind/Length - 3-1.1 - Extend of a spatial dimension. - https://doi.org/10.1351/goldbook.L03498 - - - - - - - T-3 L+1 M0 I0 Θ0 N0 J0 - - - - - LengthPerCubeTimeUnit - LengthPerCubeTimeUnit + In geometrical optics, vergence describes the curvature of optical wavefronts. + Vergence + Vergence + http://qudt.org/vocab/quantitykind/Curvature - - - - - - - - - - - - - - A direct part that is obtained by partitioning a whole hybridly in spatial, temporal and spatiotemporal parts. - JunctionTile - JunctionTile - A direct part that is obtained by partitioning a whole hybridly in spatial, temporal and spatiotemporal parts. + + + + A continuant (here called object) is usually defined as a whole whose all possible temporal parts are always satisfying a specific criterion (wich is the classical definition of continuants). +However that's not possible in general, since we will finally end to temporal parts whose temporal extension is so small that the connectivity relations that define the object will no longer hold. That's the case when the temporal interval is lower than the interval that characterize the causality interactions between the object parts. +In other terms, if the time span of a temporal part is lower than the inverse of the frequency of interactions between the constituents, then the constituents in such temporal part are not connected. The object is no more an object, neither an item, but simply a collection of fundamental parts. +To overcome this issue, we can identify an minimum holistic temporal part (a lower time interval value), below which a specific definition for an object type does not hold anymore, that is called a fundamental. + A whole that is identified according to a criteria based on its spatial configuration that is satisfied throughout its time extension. + Object + Continuant + Endurant + Object + A whole that is identified according to a criteria based on its spatial configuration that is satisfied throughout its time extension. - - - - Unit for quantities of dimension one that are the fraction of two amount of substance. - AmountFractionUnit - AmountFractionUnit - Unit for quantities of dimension one that are the fraction of two amount of substance. - Unit for amount fraction. + + + + + A constitutive process is a process that is holistically relevant for the definition of the whole. + A process which is an holistic spatial part of an object. + ConstitutiveProcess + ConstitutiveProcess + A process which is an holistic spatial part of an object. + Blood circulation in a human body. + A constitutive process is a process that is holistically relevant for the definition of the whole. - - - - Quantities that are ratios of quantities of the same kind (for example length ratios and amount fractions) have the option of being expressed with units (m/m, mol/mol to aid the understanding of the quantity being expressed and also allow the use of SI prefixes, if this -is desirable (μm/m, nmol/mol). --- SI Brochure - Unit for fractions of quantities of the same kind, to aid the understanding of the quantity being expressed. - FractionUnit - RatioUnit - FractionUnit - Unit for fractions of quantities of the same kind, to aid the understanding of the quantity being expressed. + + + + Characterisation procedure may refer to the full characterisation process or just a part of the full process. + The process of performing characterisation by following some existing formalised operative rules. + CharacterisationProcedure + CharacterisationProcedure + The process of performing characterisation by following some existing formalised operative rules. + Sample preparation +Sample inspection +Calibration +Microscopy +Viscometry +Data sampling + Characterisation procedure may refer to the full characterisation process or just a part of the full process. - - - - - - - - - - + + + + + - - - - - - + + - - An entity that is categorized according to its relation with a whole through a parthood relation and that contributes to it according to an holistic criterion, where the type of the whole is not the type of the part. - In this class the concept of role and part are superimposed (the term part is also used to define the role played by an actor). -Here entities are categorized according to their relation with the whole, i.e. how they contribute to make a specific whole, and not what they are as separate entities. -This class is expected to host the definition of world objects as they appear in its relation with the surrounding whole (being a part implies being surrounded by something bigger to which it contributes). - Role - HolisticPart - Part - Role - An entity that is categorized according to its relation with a whole through a parthood relation and that contributes to it according to an holistic criterion, where the type of the whole is not the type of the part. - In this class the concept of role and part are superimposed (the term part is also used to define the role played by an actor). -Here entities are categorized according to their relation with the whole, i.e. how they contribute to make a specific whole, and not what they are as separate entities. -This class is expected to host the definition of world objects as they appear in its relation with the surrounding whole (being a part implies being surrounded by something bigger to which it contributes). - - - - - + - For particle X, mass of that particle at rest in an inertial frame. - RestMass - InvariantMass - ProperMass - RestMass - https://qudt.org/vocab/quantitykind/RestMass - https://www.wikidata.org/wiki/Q96941619 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-03 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-04-16 - https://dbpedia.org/page/Mass_in_special_relativity - 10-2 - For particle X, mass of that particle at rest in an inertial frame. - https://en.wikipedia.org/wiki/Invariant_mass - - - - - - A language object that follows syntactic rules of a programming language. - A programming language object can also be a fragment (e.g. a C function) not suitable for exectution. - ProgrammingLanguage - Code - SoftwareCode - ProgrammingLanguage - A language object that follows syntactic rules of a programming language. - A programming language object can also be a fragment (e.g. a C function) not suitable for exectution. - Entities are not necessarily digital data, but can be code fragments printed on paper. - - - - - - A computer language by which a human can specify an executable problem solution to a computer. - ConstructionLanguage - ConstructionLanguage - A computer language by which a human can specify an executable problem solution to a computer. - https://en.wikipedia.org/wiki/Software_construction#Construction_languages + SecondPolarMomentOfArea + SecondPolarMomentOfArea + https://qudt.org/vocab/quantitykind/SecondPolarMomentOfArea + https://www.wikidata.org/wiki/Q1049636 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-30 + 4-21.2 - - + + + + + - - + + + + SecondAxialMomentOfArea + SecondAxialMomentOfArea + https://qudt.org/vocab/quantitykind/SecondAxialMomentOfArea + https://www.wikidata.org/wiki/Q91405496 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-29 + 4-21.1 + + + + + + + + + + + + + + - - + + - - + + + + + + - - Sample preparation processes (e.g., machining, polishing, cutting to size, etc.) before actual observation and measurement. - - SamplePreparation - SamplePreparation - Sample preparation processes (e.g., machining, polishing, cutting to size, etc.) before actual observation and measurement. + + The entity (or agent, or observer, or cognitive entity) who connects 'Sign', 'Interpretant' and 'Object'. + The interpreter is not the ontologist, being the ontologist acting outside the ontology at the meta-ontology level. + +On the contrary, the interpreter is an agent recognized by the ontologist. The semiotic branch of the EMMO is the tool used by the ontologist to represent an interpreter's semiotic activity. + Interpreter + Interpreter + The entity (or agent, or observer, or cognitive entity) who connects 'Sign', 'Interpretant' and 'Object'. + For example, the ontologist may be interest in cataloguing in the EMMO how the same object (e.g. a cat) is addressed using different signs (e.g. cat, gatto, chat) by different interpreters (e.g. english, italian or french people). + +The same applies for the results of measurements: the ontologist may be interest to represent in the EMMO how different measurement processes (i.e. semiosis) lead to different quantitative results (i.e. signs) according to different measurement devices (i.e. interpreters). - - - - An object which supports the specimen in the correct position for the characterisation process. - - Holder - Holder - An object which supports the specimen in the correct position for the characterisation process. + + + + The corresponding Celsius temperature is denoted td and is also called dew point. + Thermodynamic temperature at which vapour in air reaches saturation. + DewPointTemperature + DewPointTemperature + https://www.wikidata.org/wiki/Q178828 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-67 + 5-36 + Thermodynamic temperature at which vapour in air reaches saturation. + https://doi.org/10.1351/goldbook.D01652 @@ -6588,6 +3888,111 @@ This class is expected to host the definition of world objects as they appear in https://doi.org/10.1351/goldbook.T06321 + + + + Physical constant used to define a unit system. Hence, when expressed in that unit system they have an exact value with no associated uncertainty. + ExactConstant + ExactConstant + Physical constant used to define a unit system. Hence, when expressed in that unit system they have an exact value with no associated uncertainty. + + + + + + + + + + + + + + + + + Physical constants are categorised into "exact" and measured constants. + +With "exact" constants, we refer to physical constants that have an exact numerical value after the revision of the SI system that was enforsed May 2019. + PhysicalConstant + PhysicalConstant + Physical constants are categorised into "exact" and measured constants. + +With "exact" constants, we refer to physical constants that have an exact numerical value after the revision of the SI system that was enforsed May 2019. + https://en.wikipedia.org/wiki/List_of_physical_constants + + + + + + + In an infinite medium, the probability that a neutron slowing down will traverse all or some specified portion of the range of resonance energies without being absorbed. + ResonanceEscapeProbability + ResonanceEscapeProbability + https://qudt.org/vocab/quantitykind/ResonanceEscapeProbability + https://www.wikidata.org/wiki/Q4108072 + 10-68 + In an infinite medium, the probability that a neutron slowing down will traverse all or some specified portion of the range of resonance energies without being absorbed. + + + + + + Probability is a dimensionless quantity that can attain values between 0 and 1; zero denotes the impossible event and 1 denotes a certain event. + The propability for a certain outcome, is the ratio between the number of events leading to the given outcome and the total number of events. + Probability + Probability + Probability is a dimensionless quantity that can attain values between 0 and 1; zero denotes the impossible event and 1 denotes a certain event. + https://doi.org/10.1351/goldbook.P04855 + + + + + + An holistic system of people that has its own functions with responsibilities, authorities and relationships to achieve its objectives. + Organisation + ISO 55000:2014 +organization: person or group of people that has its own functions with responsibilities, authorities and relationships to achieve its objectives + Organisation + An holistic system of people that has its own functions with responsibilities, authorities and relationships to achieve its objectives. + + + + + + + + + + + + + + + + A flow of electric charge. + ElectricCurrent + ElectricCurrent + http://qudt.org/vocab/quantitykind/ElectricCurrent + 6-1 + A flow of electric charge. + https://doi.org/10.1351/goldbook.E01927 + + + + + + + A quantity whose magnitude is additive for subsystems. + Note that not all physical quantities can be categorised as being either intensive or extensive. For example the square root of the mass. + Extensive + Extensive + A quantity whose magnitude is additive for subsystems. + Mass +Volume +Entropy + + @@ -6635,354 +4040,440 @@ This class is expected to host the definition of world objects as they appear in https://en.wikipedia.org/wiki/International_System_of_Quantities - - - - - - - - - - - A causal object that is tessellated in direct parts. - A tessellation (or tiling) is the covering of a surface, often a plane, using one or more geometric shapes, called tiles, with no overlaps and no gaps. - Tessellation - Tiling - Tessellation - A tessellation (or tiling) is the covering of a surface, often a plane, using one or more geometric shapes, called tiles, with no overlaps and no gaps. - A causal object that is tessellated in direct parts. + + + + + + + + + + + + + + + + + + + + + TopQuark + TopQuark + https://en.wikipedia.org/wiki/Top_quark - - + + + + + + + + + + + + + + + + + + ThirdGenerationFermion + ThirdGenerationFermion + + + + + + + + + + + + + + + + + + + + + + UpQuarkType + UpQuarkType + + + + + - - - - - - + + - - A causal object that is direct part of a tessellation. - Tile - Tile - A causal object that is direct part of a tessellation. - + + An equation with variables can always be represented as: - - - - - T-2 L-1 M+1 I0 Θ0 N0 J0 - - - - - PressureUnit - PressureUnit +f(v0, v1, ..., vn) = g(v0, v1, ..., vn) + +where f is the left hand and g the right hand side expressions and v0, v1, ..., vn are the variables. + The class of 'mathematical'-s that stand for a statement of equality between two mathematical expressions. + Equation + Equation + The class of 'mathematical'-s that stand for a statement of equality between two mathematical expressions. + 2+3 = 5 +x^2 +3x = 5x +dv/dt = a +sin(x) = y - - - - - Equivalent to the Boltzmann constant, but expressed in units of energy per temperature increment per mole (rather than energy per temperature increment per particle). - MolarGasConstant - MolarGasConstant - http://qudt.org/vocab/constant/MolarGasConstant - 9-37.1 - Equivalent to the Boltzmann constant, but expressed in units of energy per temperature increment per mole (rather than energy per temperature increment per particle). - https://doi.org/10.1351/goldbook.G02579 + + + + A mathematical string that express a relation between the elements in one set X to elements in another set Y. + The set X is called domain and the set Y range or codomain. + MathematicalFormula + MathematicalFormula + A mathematical string that express a relation between the elements in one set X to elements in another set Y. - - - - Physical constant that by definition (after the latest revision of the SI system that was enforsed May 2019) has a known exact numerical value when expressed in SI units. - SIExactConstant - SIExactConstant - Physical constant that by definition (after the latest revision of the SI system that was enforsed May 2019) has a known exact numerical value when expressed in SI units. + + + + + + + + + + + + + + + + + + + + + + + + + + + A causal system provides the most general concept of system, being a union of causal structures interacting together. In its most simple form, a causal system is an interlacement of causal paths (the most simple structure type). + A non-path causal structure + CausalSystem + CausalSystem + A causal system provides the most general concept of system, being a union of causal structures interacting together. In its most simple form, a causal system is an interlacement of causal paths (the most simple structure type). + A non-path causal structure + A electron binded by a nucleus. - + + - + - SpecificGasConstant - SpecificGasConstant - https://www.wikidata.org/wiki/Q94372268 - 5-26 + At a point fixed in a medium with a temperature field, scalar quantity λ characterizing the ability of the medium to transmit heat through a surface element containing that point: φ = −λ grad T, where φ is the density of heat flow rate and T is thermodynamic temperature. + In an anisotropic medium, thermal conductivity is a tensor quantity. + ThermalConductivity + ThermalConductivity + https://qudt.org/vocab/quantitykind/ThermalConductivity + https://www.wikidata.org/wiki/Q487005 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-38 + https://dbpedia.org/page/Thermal_conductivity + 5-9 + At a point fixed in a medium with a temperature field, scalar quantity λ characterizing the ability of the medium to transmit heat through a surface element containing that point: φ = −λ grad T, where φ is the density of heat flow rate and T is thermodynamic temperature. - - - - - T-2 L+2 M+1 I0 Θ0 N0 J0 - - - + + - EnergyUnit - EnergyUnit - - - - - - A direct part that is obtained by partitioning a whole purely in spatial parts. - SpatialTile - SpatialTile - A direct part that is obtained by partitioning a whole purely in spatial parts. + A quantity whose magnitude is independent of the size of the system. + Note that not all physical quantities can be categorised as being either intensive or extensive. For example the square root of the mass. + Intensive + Intensive + A quantity whose magnitude is independent of the size of the system. + Temperature +Density +Pressure +ChemicalPotential - - - - - + + - - + + + + + + - In nuclear physics, product of the number density of atoms of a given type and the cross section. - VolumicCrossSection - MacroscopicCrossSection - VolumicCrossSection - https://qudt.org/vocab/quantitykind/MacroscopicCrossSection - https://www.wikidata.org/wiki/Q98280520 - 10-42.1 - In nuclear physics, product of the number density of atoms of a given type and the cross section. - https://doi.org/10.1351/goldbook.M03674 + Number of direct parts of a Reductionistic. + Using direct parthood EMMO creates a well-defined broadcasting between granularity levels. This also make it possible to count the direct parts of each granularity level. + NumberOfElements + NumberOfElements + Number of direct parts of a Reductionistic. - - - - - T-2 L+2 M+1 I0 Θ-1 N-1 J0 - - - + + + - EntropyPerAmountUnit - EntropyPerAmountUnit + Dimensionless scalar value which describes the ratio of the force of friction between two bodies and the force pressing them together; depends on the materials used, ranges from near zero to greater than one. + CoefficientOfFriction + FrictionCoefficient + FrictionFactor + CoefficientOfFriction + https://www.wikidata.org/wiki/Q1932524 + Dimensionless scalar value which describes the ratio of the force of friction between two bodies and the force pressing them together; depends on the materials used, ranges from near zero to greater than one. + https://doi.org/10.1351/goldbook.F02530 - - - - - The DBpedia definition (http://dbpedia.org/page/Elementary_charge) is outdated as May 20, 2019. It is now an exact quantity. - The magnitude of the electric charge carried by a single electron. It defines the base unit Ampere in the SI system. - ElementaryCharge - ElementaryCharge - http://qudt.org/vocab/quantitykind/ElementaryCharge - 10-5.1 - The magnitude of the electric charge carried by a single electron. It defines the base unit Ampere in the SI system. - https://doi.org/10.1351/goldbook.E02032 + + + + + A process which is an holistic spatial part of a process. + In the EMMO the relation of participation to a process falls under mereotopology. + +Since topological connection means causality, then the only way for a real world object to participate to a process is to be a part of it. + SubProcess + SubProcess + A process which is an holistic spatial part of a process. + Breathing is a subprocess of living for a human being. + In the EMMO the relation of participation to a process falls under mereotopology. + +Since topological connection means causality, then the only way for a real world object to participate to a process is to be a part of it. - - - - - - - - - - - - - - The physical property of matter that causes it to experience a force when placed in an electromagnetic field. - ElectricCharge - Charge - ElectricCharge - http://qudt.org/vocab/quantitykind/ElectricCharge - https://www.wikidata.org/wiki/Q1111 - 6-2 - The physical property of matter that causes it to experience a force when placed in an electromagnetic field. - https://doi.org/10.1351/goldbook.E01923 + + + + A process can be defined only according to an entity type. The minimum process is an entity made of two entities of the same type that are temporally related. + A whole that is identified according to a criteria based on its temporal evolution that is satisfied throughout its time extension. + Following the common definition of process, the reader may think that every whole should be a process, since every 4D object always has a time dimension. However, in the EMMO we restrict the meaning of the word process to items whose evolution in time have a particular meaning for the ontologist (i.e. every 4D object unfolds in time, but not every 4D time unfolding may be of interest for the ontologist and categorized as a process). + +For this reason, the definition of every specific process subclass requires the introduction of a primitive concept. + Process + Occurrent + Perdurant + Process + A whole that is identified according to a criteria based on its temporal evolution that is satisfied throughout its time extension. + A process can be defined only according to an entity type. The minimum process is an entity made of two entities of the same type that are temporally related. - - - - CSharp - C# - CSharp + + + + An holistic spatial part of a whole. + NonTemporalRole + HolisticSpatialPart + NonTemporalRole + An holistic spatial part of a whole. - - - - - T0 L-3 M0 I0 Θ0 N0 J0 - - - - - PerVolumeUnit - PerVolumeUnit + + + + In electrochemical characterization, the measurement of potential, charge, or current is used to determine an analyte's concentration or to characterize an analyte's chemical reactivity + + ElectrochemicalTesting + http://dx.doi.org/10.1016/B978-0-323-46140-5.00002-9 + ElectrochemicalTesting + In electrochemical characterization, the measurement of potential, charge, or current is used to determine an analyte's concentration or to characterize an analyte's chemical reactivity - - - - Draw forming by drawing a workpiece through a tool opening that is narrowed in the drawing direction. - DrawForming - DrawForming + + + + + ChargeDistribution + ChargeDistribution - - + + - - + - Scalar measure of the rotational inertia with respect to a fixed axis of rotation. - MomentOfIntertia - MomentOfIntertia - https://qudt.org/vocab/quantitykind/MomentOfInertia - https://www.wikidata.org/wiki/Q165618 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-21 - 4-7 - Scalar measure of the rotational inertia with respect to a fixed axis of rotation. - https://doi.org/10.1351/goldbook.M04006 + Measure of probability that a specific process will take place in a collision of two particles. + AtomicPhysicsCrossSection + AtomicPhysicsCrossSection + https://qudt.org/vocab/quantitykind/Cross-Section.html + https://www.wikidata.org/wiki/Q17128025 + 10-38.1 + Measure of probability that a specific process will take place in a collision of two particles. - - - - Gibbs energy per unit mass. - SpecificGibbsEnergy - SpecificGibbsEnergy - https://qudt.org/vocab/quantitykind/SpecificGibbsEnergy - https://www.wikidata.org/wiki/Q76360636 - 5-21.5 - Gibbs energy per unit mass. + + + + + + + + + + + + + + + + + + + + + StrangeAntiQuark + StrangeAntiQuark - + - + - - + - Energy per unit mass - SpecificEnergy - SpecificEnergy - https://qudt.org/vocab/quantitykind/SpecificEnergy - https://www.wikidata.org/wiki/Q3023293 - https://dbpedia.org/page/Specific_energy - 5-21.1 - Energy per unit mass - https://en.wikipedia.org/wiki/Specific_energy - - - - - - - - A continuum characterized by structural rigidity and resistance to changes of shape or volume, that retains its shape and density when not confined. - Solid - Solid - A continuum characterized by structural rigidity and resistance to changes of shape or volume, that retains its shape and density when not confined. + Differential quotient of the cross section for a process and the energy of the scattered particle. + EnergyDistributionOfCrossSection + EnergyDistributionOfCrossSection + https://qudt.org/vocab/quantitykind/SpectralCrossSection + https://www.wikidata.org/wiki/Q98267245 + 10-40 + Differential quotient of the cross section for a process and the energy of the scattered particle. - + - - + + - - - The subject of condensed matter physics that deals with the macroscopic and microscopic physical properties of matter, especially the solid and liquid phases which arise from electromagnetic forces between atoms. More generally, the subject deals with "condensed" phases of matter: systems of many constituents with strong interactions between them. - CondensedMatter - CondensedMatter - The subject of condensed matter physics that deals with the macroscopic and microscopic physical properties of matter, especially the solid and liquid phases which arise from electromagnetic forces between atoms. More generally, the subject deals with "condensed" phases of matter: systems of many constituents with strong interactions between them. + + + A data is a causal object whose variations (non-uniformity) can be recognised and eventually interpreted. +A data can be of different physical types (e.g., matter, wave, atomic excited states). +How the variations are recognised and eventually decoded depends on the interpreting rules that characterise that type of data. +Variations are pure physical variations and do not necessarily possess semantic meaning. + A perspective in which entities are represented according to the variation of their properties. + Data + Luciano Floridi, "Information - A very Short Introduction", Oxford University Press., (2010) ISBN 978-0199551378 + Contrast + Dedomena + Pattern + Data + A perspective in which entities are represented according to the variation of their properties. + A data is a causal object whose variations (non-uniformity) can be recognised and eventually interpreted. +A data can be of different physical types (e.g., matter, wave, atomic excited states). +How the variations are recognised and eventually decoded depends on the interpreting rules that characterise that type of data. +Variations are pure physical variations and do not necessarily possess semantic meaning. + The covering axiom that defines the data class discriminates within all the possible causal objects between encoded or non encoded. - - - - - - - - - - - - - - - - - - - - - - - - - A superclass made as the disjoint union of all the form under which matter can exist. - In physics, a state of matter is one of the distinct forms in which matter can exist. Four states of matter are observable in everyday life: solid, liquid, gas, and plasma. - StateOfMatter - StateOfMatter - A superclass made as the disjoint union of all the form under which matter can exist. - In physics, a state of matter is one of the distinct forms in which matter can exist. Four states of matter are observable in everyday life: solid, liquid, gas, and plasma. - https://en.wikipedia.org/wiki/State_of_matter + + + + A manufacturing in which an adherent layer of amorphous material is applied to a workpiece. + CoatingManufacturing + DIN 8580:2020 + Beschichten + CoatingManufacturing + A manufacturing in which an adherent layer of amorphous material is applied to a workpiece. - - + + - VaporDeposition - VaporDeposition + MergingManufacturing + AddingManufacturing + MergingManufacturing - - - - FormingFromGas - FormingFromGas + + + + + + + + + + + + + In nuclear physics, incident radiant energy per cross-sectional area. + EnergyFluence + EnergyFluence + https://qudt.org/vocab/quantitykind/EnergyFluence + https://www.wikidata.org/wiki/Q98538612 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-17 + 10-46 + In nuclear physics, incident radiant energy per cross-sectional area. + + + + + + + + + + + + + + + + Electric current divided by the cross-sectional area it is passing through. + ElectricCurrentDensity + AreicElectricCurrent + CurrentDensity + ElectricCurrentDensity + http://qudt.org/vocab/quantitykind/ElectricCurrentDensity + https://www.wikidata.org/wiki/Q234072 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-11 + 6-8 + https://en.wikipedia.org/wiki/Current_density + https://doi.org/10.1351/goldbook.E01928 @@ -6996,190 +4487,254 @@ This class is expected to host the definition of world objects as they appear in Dynamic Mechanical Analysis (DMA) is a material characterization technique where a small deformation is applied to a sample in a cyclic manner. This allows measurement of the materials response to stress, temperature, frequency or time. The term is also used to refer to the analyzer that performs the test. - - - - Spectroscopy is a category of characterization techniques which use a range of principles to reveal the chemical composition, composition variation, crystal structure and photoelectric properties of materials. - - Spectroscopy - Spectroscopy - Spectroscopy is a category of characterization techniques which use a range of principles to reveal the chemical composition, composition variation, crystal structure and photoelectric properties of materials. + + + + CeramicSintering + CeramicSintering - - - - If the whole scan is performed on a single growing drop, the technique should be called single drop scan voltammetry. The term polarography in this context is discouraged. - This is the oldest variant of polarographic techniques, introduced by Jaroslav Heyrovský (1890 – 1967). - Usually the drop time is between 1 and 5 s and the pseudo-steady-state wave-shaped dependence on potential is called a polarogram. If the limiting current is controlled by dif- fusion, it is expressed by the Ilkovich equation. - linear scan voltammetry with slow scan rate in which a dropping mercury electrode is used as the working electrode - - DCPolarography - DCPolarography - linear scan voltammetry with slow scan rate in which a dropping mercury electrode is used as the working electrode - https://doi.org/10.1515/pac-2018-0109 + + + + Sintering is the process of forming a solid mass of material through heat and pressure without melting to the point of liquefaction. This process involves the atoms in materials diffusing across the particle boundaries and fusing together into one piece. + Sintering occurs naturally in mineral deposits, and is used as a manufacturing process for materials including ceramics, metals and plastics. +Because the sintering temperature doesn’t reach the materials’ melting point, it is often used for materials with high melting points, such as molybdenum and tungsten. + Sintering + ISO 3252:2019 Powder metallurgy +sintering: thermal treatment of a powder or compact, at a temperature below the melting point of the main constituent, for the purpose of increasing its strength by the metallurgical bonding of its particles + ISO/ASTM TR 52906:2022 Additive manufacturing +sintering: process of heating a powder metal compact to increase density and/or improve mechanical properties via solid state diffusion + https://www.twi-global.com/technical-knowledge/faqs/what-is-sintering + Sintern + Sintering + Sintering is the process of forming a solid mass of material through heat and pressure without melting to the point of liquefaction. This process involves the atoms in materials diffusing across the particle boundaries and fusing together into one piece. + Sintering occurs naturally in mineral deposits, and is used as a manufacturing process for materials including ceramics, metals and plastics. +Because the sintering temperature doesn’t reach the materials’ melting point, it is often used for materials with high melting points, such as molybdenum and tungsten. - - + + - The current vs. potential (I-E) curve is called a voltammogram. - Voltammetry is an analytical technique based on the measure of the current flowing through an electrode dipped in a solution containing electro-active compounds, while a potential scanning is imposed upon it. + Set of inherent properties of a substance, mixture of substances, or a process involving substances that, under production, usage, or disposal conditions, make it capable of causing adverse effects to organisms or the environment, depending on the degree of exposure; in other words, it is a source of danger. - Voltammetry - Voltammetry - https://www.wikidata.org/wiki/Q904093 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-04-11 - Voltammetry is an analytical technique based on the measure of the current flowing through an electrode dipped in a solution containing electro-active compounds, while a potential scanning is imposed upon it. - https://en.wikipedia.org/wiki/Voltammetry - https://doi.org/10.1515/pac-2018-0109 - - - - - - Screwing (screwing on, screwing in, screwing tight) is joining by pressing on by means of a self-locking thread (from: DIN 8593 Part 3/09.85). - Screwing - Schrauben - Screwing + Hazard + Hazard + Set of inherent properties of a substance, mixture of substances, or a process involving substances that, under production, usage, or disposal conditions, make it capable of causing adverse effects to organisms or the environment, depending on the degree of exposure; in other words, it is a source of danger. - - - - - - - - + + - - + + + + + + + + A coded that makes use of an atomic symbol with respect to the code used to refer to the interaction. + A property is atomic in the sense that is aimed to deliver one and one only aspect of the object according to one code, such as the color with one sign (e.g., black) or a quantitiative property (e.g., 1.4 kg). + Property + Property + A coded that makes use of an atomic symbol with respect to the code used to refer to the interaction. + Hardness is a subclass of properties. +Vickers hardness is a subclass of hardness that involves the procedures and instruments defined by the standard hardness test. + The name "red" which is atomic in the code made of the list of colors. + A property is atomic in the sense that is aimed to deliver one and one only aspect of the object according to one code, such as the color with one sign (e.g., black) or a quantitiative property (e.g., 1.4 kg). + + + + + + + The frequency standard in the SI system in which the photon absorption by transitions between the two hyperfine ground states of caesium-133 atoms are used to control the output frequency. + +It defines the base unit second in the SI system. + HyperfineTransitionFrequencyOfCs + HyperfineTransitionFrequencyOfCs + The frequency standard in the SI system in which the photon absorption by transitions between the two hyperfine ground states of caesium-133 atoms are used to control the output frequency. + +It defines the base unit second in the SI system. + + + + + + + - - + + - - Cognition - IconSemiosis - Cognition + + Number of periods per time interval. + Frequency + Frequency + http://qudt.org/vocab/quantitykind/Frequency + https://www.wikidata.org/wiki/Q11652 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-06-02 + 3-15.1 + Number of periods per time interval. + https://doi.org/10.1351/goldbook.FT07383 - - - - chronopotentiometry where the applied current is changed linearly - - LinearChronopotentiometry - LinearChronopotentiometry - chronopotentiometry where the applied current is changed linearly + + + + + A process which is an holistic temporal part of an object. + Behaviour + Behaviour + A process which is an holistic temporal part of an object. + Accelerating is a behaviour of a car. - - - - The change in applied current is usually a step, but cyclic current reversals or linearly increasing currents are also used. - potentiometry in which the potential is measured with time following a change in applied current - - Chronopotentiometry - Chronopotentiometry - potentiometry in which the potential is measured with time following a change in applied current - https://doi.org/10.1515/pac-2018-0109 + + + + A process occurring by natural (non-intentional) laws. + NaturalProcess + NonIntentionalProcess + NaturalProcess + A process occurring by natural (non-intentional) laws. - - - - A colloid in which small particles (1 nm to 100 nm) are suspended in a continuum phase. - Sol - Sol - A colloid in which small particles (1 nm to 100 nm) are suspended in a continuum phase. + + + + + Quotient of the number of internal conversion electrons and the number of gamma quanta emitted by the radioactive atom in a given transition, where a conversion electron represents an orbital electron emitted through the radioactive decay. + InternalConversionFactor + InternalConversionCoefficient + InternalConversionFactor + https://qudt.org/vocab/quantitykind/InternalConversionFactor + https://www.wikidata.org/wiki/Q6047819 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-02-57 + 10-35 + Quotient of the number of internal conversion electrons and the number of gamma quanta emitted by the radioactive atom in a given transition, where a conversion electron represents an orbital electron emitted through the radioactive decay. - - - + + + + Quantities defined as ratios `Q=A/B` having equal dimensions in numerator and denominator are dimensionless quantities but still have a physical dimension defined as dim(A)/dim(B). + +Johansson, Ingvar (2010). "Metrological thinking needs the notions of parametric quantities, units and dimensions". Metrologia. 47 (3): 219–230. doi:10.1088/0026-1394/47/3/012. ISSN 0026-1394. + The class of quantities that are the ratio of two quantities with the same physical dimensionality. + RatioQuantity + https://iopscience.iop.org/article/10.1088/0026-1394/47/3/012 + RatioQuantity + http://qudt.org/vocab/quantitykind/DimensionlessRatio + The class of quantities that are the ratio of two quantities with the same physical dimensionality. + refractive index, +volume fraction, +fine structure constant + + + + + + + + + + + + + + ReciprocalDuration + InverseDuration + InverseTime + ReciprocalTime + ReciprocalDuration + https://qudt.org/vocab/quantitykind/InverseTime + https://www.wikidata.org/wiki/Q98690850 + + + + + + + + + + + + + - A mixture in which one substance of microscopically dispersed insoluble or soluble particles (from 1 nm to 1 μm) is suspended throughout another substance and that does not settle, or would take a very long time to settle appreciably. - Colloids are characterized by the occurring of the Tyndall effect on light. - Colloid - Colloid - A mixture in which one substance of microscopically dispersed insoluble or soluble particles (from 1 nm to 1 μm) is suspended throughout another substance and that does not settle, or would take a very long time to settle appreciably. - Colloids are characterized by the occurring of the Tyndall effect on light. + CompositeFermion + CompositeFermion + Examples of composite particles with half-integer spin: +spin 1/2: He3 in ground state, proton, neutron +spin 3/2: He5 in ground state, Delta baryons (excitations of the proton and neutron) - - - - A causal multipath system is a system made of causal paths that are not interacting between each others, or possibly merge and fork. - A physically unbounded system is a combination of decays and/or annihilations, without any space-like interaction between elementary particles. - PhysicallyNonInteracting - PhysicallyNonInteracting - A causal multipath system is a system made of causal paths that are not interacting between each others, or possibly merge and fork. - A physically unbounded system is a combination of decays and/or annihilations, without any space-like interaction between elementary particles. + + + + + A coarse dispersion of solid in a gas continuum phase. + GasSolidSuspension + GasSolidSuspension + A coarse dispersion of solid in a gas continuum phase. + Dust, sand storm. - - - - - - - - - - - - - - - - - - - - - - - - - - - A causal system provides the most general concept of system, being a union of causal structures interacting together. In its most simple form, a causal system is an interlacement of causal paths (the most simple structure type). - A non-path causal structure - CausalSystem - CausalSystem - A causal system provides the most general concept of system, being a union of causal structures interacting together. In its most simple form, a causal system is an interlacement of causal paths (the most simple structure type). - A non-path causal structure - A electron binded by a nucleus. + + + + + + + + + + + + + GasMixture + GasMixture - - + + + - + - + - + - + - + - - + + + + + + + + + + + + @@ -7192,533 +4747,652 @@ This class is expected to host the definition of world objects as they appear in - - GreenAntiQuark - GreenAntiQuark + + An heterogeneous mixture that contains coarsly dispersed particles (no Tyndall effect), that generally tend to separate in time to the dispersion medium phase. + Suspensions show no significant effect on light. + Suspension + Suspension + An heterogeneous mixture that contains coarsly dispersed particles (no Tyndall effect), that generally tend to separate in time to the dispersion medium phase. - - - - Analysis of the sample in order to determine information that are relevant for the characterisation method. - - SampleInspection - SampleInspection - Analysis of the sample in order to determine information that are relevant for the characterisation method. - In the Nanoindentation method the Scanning Electron Microscope to determine the indentation area. + + + + + T-3 L+1 M+1 I0 Θ-1 N0 J0 + + + + + ThermalConductivityUnit + ThermalConductivityUnit - - - - A meson with total spin 1 and odd parit. - VectorMeson - VectorMeson - A meson with total spin 1 and odd parit. - https://en.wikipedia.org/wiki/Vector_meson + + + + + IsentropicCompressibility + IsentropicCompressibility + https://qudt.org/vocab/quantitykind/IsentropicCompressibility + https://www.wikidata.org/wiki/Q2990695 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-32 + 5-5.2 - - - - ThermomechanicalTreatment - ThermomechanicalTreatment + + + + + + + + + + + + + Measure of the relative volume change of a fluid or solid as a response to a pressure change. + Compressibility + Compressibility + https://qudt.org/vocab/quantitykind/Compressibility + https://www.wikidata.org/wiki/Q8067817 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-70 + 4-20 + Measure of the relative volume change of a fluid or solid as a response to a pressure change. - - - - - Has shaped bodies as input and output. - The processing of a material aimed to transform its structure by means of any type of treatment, without involving relevant synthesis phenomena. - esce workpiece - MaterialTreatment - DIN 8580:2020 - Stoffeigenschaft ändern - WorkPieceTreatment - MaterialTreatment - The processing of a material aimed to transform its structure by means of any type of treatment, without involving relevant synthesis phenomena. - Has shaped bodies as input and output. - Manufacturing by changing the properties of the material of which a workpiece is made, which is done, among other things, by changes in the submicroscopic or atomic range, e.g. by diffusion of atoms, generation and movement of dislocations in the atomic lattice or chemical reactions, and where unavoidable changes in shape are not part of the essence of these processes. + + + + + + + + + + + + + + + + + + + 1 + + + + A real number. + Real + Real + A real number. + + + + + + + A number individual provides the link between the ontology and the actual data, through the data property hasNumericalValue. + A number is actually a string (e.g. 1.4, 1e-8) of numerical digits and other symbols. However, in order not to increase complexity of the taxonomy and relations, here we take a number as an "atomic" object, without decomposit it in digits (i.e. we do not include digits in the EMMO as alphabet for numbers). + A numerical data value. + In math usually number and numeral are distinct concepts, the numeral being the symbol or a composition of symbols (e.g. 3.14, 010010, three) and the number is the idea behind it. +More than one numeral stands for the same number. +In the EMMO abstract entities do not exists, and numbers are simply defined by other numerals, so that a number is the class of all the numerals that are equivalent (e.g. 3 and 0011 are numerals that stands for the same number). +Or alternatively, an integer numeral may also stands for a set of a specific cardinality (e.g. 3 stands for a set of three apples). Rational and real numbers are simply a syntactic arrangment of integers (digits, in decimal system). +The fact that you can't give a name to a number without using a numeral or, in case of positive integers, without referring to a real world objects set with specific cardinality, suggests that the abstract concept of number is not a concept that can be practically used. +For these reasons, the EMMO will consider numerals and numbers as the same concept. + Number + Numeral + Number + A numerical data value. + + + + + + A variable is a symbolic object that stands for any other mathematical object, such as number, a vector, a matrix, a function, the argument of a function, a set, an element of a set. + Variable + Variable + A variable is a symbolic object that stands for any other mathematical object, such as number, a vector, a matrix, a function, the argument of a function, a set, an element of a set. + x +k + + + + + + + + + + + + + + + + Inverse of 'ElectricalResistance'. + Measure of the ease for electric current to pass through a material. + ElectricConductance + Conductance + ElectricConductance + http://qudt.org/vocab/quantitykind/Conductance + https://www.wikidata.org/wiki/Q309017 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-06 + 6-47 + Measure of the ease for electric current to pass through a material. + https://doi.org/10.1351/goldbook.E01925 - - + + + + + T+1 L+1 M0 I0 Θ+1 N0 J0 + + + - For a substance in a mixture, the absolute activity of the pure substance at the same temperature but at standard pressure. - StandardAbsoluteActivity - StandardAbsoluteActivityInAMixture - StandardAbsoluteActivity - https://qudt.org/vocab/quantitykind/StandardAbsoluteActivity - https://www.wikidata.org/wiki/Q89406159 - 9-23 - For a substance in a mixture, the absolute activity of the pure substance at the same temperature but at standard pressure. + LengthTimeTemperatureUnit + LengthTimeTemperatureUnit - - + + - - + + + + + + + - ThermodynamicCriticalMagneticFluxDensity - ThermodynamicCriticalMagneticFluxDensity - https://qudt.org/vocab/quantitykind/ThermodynamicCriticalMagneticFluxDensity - https://www.wikidata.org/wiki/Q106103200 - 12-36.1 + Fundamental translation vectors for the reciprocal lattice. + FundamentalReciprocalLatticeVector + FundamentalReciprocalLatticeVector + https://qudt.org/vocab/quantitykind/FundamentalReciprocalLatticeVector + https://www.wikidata.org/wiki/Q105475399 + 12-2.2 + Fundamental translation vectors for the reciprocal lattice. - + + - - + - Often denoted B. - Strength of the magnetic field. - MagneticFluxDensity - MagneticInduction - MagneticFluxDensity - http://qudt.org/vocab/quantitykind/MagneticFluxDensity - https://www.wikidata.org/wiki/Q30204 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-19 - 6-21 - Strength of the magnetic field. - https://doi.org/10.1351/goldbook.M03686 + Number of slowed-down particles per time and volume. + SlowingDownDensity + SlowingDownDensity + https://qudt.org/vocab/quantitykind/Slowing-DownDensity + https://www.wikidata.org/wiki/Q98915830 + 10-67 + Number of slowed-down particles per time and volume. - - - + + + - For type II superconductors, the threshold magnetic flux density for disappearance of bulk superconductivity. - UpperCriticalMagneticFluxDensity - UpperCriticalMagneticFluxDensity - https://qudt.org/vocab/quantitykind/UpperCriticalMagneticFluxDensity - https://www.wikidata.org/wiki/Q106127634 - 12-36.3 - For type II superconductors, the threshold magnetic flux density for disappearance of bulk superconductivity. + Decrease in magnitude of any kind of flux through a medium. + Attenuation + Extinction + Attenuation + 3-26.1 + Decrease in magnitude of any kind of flux through a medium. + https://en.wikipedia.org/wiki/Attenuation + https://doi.org/10.1351/goldbook.A00515 - - - - - For type II superconductors, the threshold magnetic flux density for magnetic flux entering the superconductor. - LowerCriticalMagneticFluxDensity - LowerCriticalMagneticFluxDensity - https://qudt.org/vocab/quantitykind/LowerCriticalMagneticFluxDensity - https://www.wikidata.org/wiki/Q106127355 - 12-36.2 - For type II superconductors, the threshold magnetic flux density for magnetic flux entering the superconductor. + + + + Confocal microscopy, most frequently confocal laser scanning microscopy (CLSM) or laser scanning confocal microscopy (LSCM), is an optical imaging technique for increasing optical resolution and contrast of a micrograph by means of using a spatial pinhole to block out-of-focus light in image formation. + ConfocalMicroscopy + ConfocalMicroscopy + Confocal microscopy, most frequently confocal laser scanning microscopy (CLSM) or laser scanning confocal microscopy (LSCM), is an optical imaging technique for increasing optical resolution and contrast of a micrograph by means of using a spatial pinhole to block out-of-focus light in image formation. - - - - Class that includes the application of scientific knowledge, tools and techniques in order to transform a precursor object (ex. conversion of material) following a practic purpose. - Conversion of materials and assembly of components for the manufacture of products - Technology is the application of knowledge for achieving practical goals in a reproducible way. - Technology refers to methods, systems, and devices which are the result of scientific knowledge being used for practical purposes. - application of scientific knowledge, tools, techniques, crafts or systems in order to solve a problem or to achieve an objective which can result in a product or process - application of scientific knowledge, tools, techniques, crafts, systems or methods of organization in order to solve a problem or achieve an objective - TechnologyProcess - ProductionEngineeringProcess - TechnologyProcess - Class that includes the application of scientific knowledge, tools and techniques in order to transform a precursor object (ex. conversion of material) following a practic purpose. + + + + Microscopy is a category of characterization techniques which probe and map the surface and sub-surface structure of a material. These techniques can use photons, electrons, ions or physical cantilever probes to gather data about a sample's structure on a range of length scales. + + Microscopy + Microscopy + Microscopy is a category of characterization techniques which probe and map the surface and sub-surface structure of a material. These techniques can use photons, electrons, ions or physical cantilever probes to gather data about a sample's structure on a range of length scales. - - - - A matter object throughout which all physical properties of a material are essentially uniform. - In the physical sciences, a phase is a region of space (a thermodynamic system), throughout which all physical properties of a material are essentially uniform. Examples of physical properties include density, index of refraction, magnetization and chemical composition. A simple description is that a phase is a region of material that is chemically uniform, physically distinct, and (often) mechanically separable. In a system consisting of ice and water in a glass jar, the ice cubes are one phase, the water is a second phase, and the humid air is a third phase over the ice and water. The glass of the jar is another separate phase. + + + + + + + + + + + Plus + Plus + -The term phase is sometimes used as a synonym for state of matter, but there can be several immiscible phases of the same state of matter. Also, the term phase is sometimes used to refer to a set of equilibrium states demarcated in terms of state variables such as pressure and temperature by a phase boundary on a phase diagram. Because phase boundaries relate to changes in the organization of matter, such as a change from liquid to solid or a more subtle change from one crystal structure to another, this latter usage is similar to the use of "phase" as a synonym for state of matter. However, the state of matter and phase diagram usages are not commensurate with the formal definition given above and the intended meaning must be determined in part from the context in which the term is used. - PhaseOfMatter - Phase - PhaseOfMatter - A matter object throughout which all physical properties of a material are essentially uniform. - In the physical sciences, a phase is a region of space (a thermodynamic system), throughout which all physical properties of a material are essentially uniform. Examples of physical properties include density, index of refraction, magnetization and chemical composition. A simple description is that a phase is a region of material that is chemically uniform, physically distinct, and (often) mechanically separable. In a system consisting of ice and water in a glass jar, the ice cubes are one phase, the water is a second phase, and the humid air is a third phase over the ice and water. The glass of the jar is another separate phase. + + + + ArithmeticOperator + ArithmeticOperator + -The term phase is sometimes used as a synonym for state of matter, but there can be several immiscible phases of the same state of matter. Also, the term phase is sometimes used to refer to a set of equilibrium states demarcated in terms of state variables such as pressure and temperature by a phase boundary on a phase diagram. Because phase boundaries relate to changes in the organization of matter, such as a change from liquid to solid or a more subtle change from one crystal structure to another, this latter usage is similar to the use of "phase" as a synonym for state of matter. However, the state of matter and phase diagram usages are not commensurate with the formal definition given above and the intended meaning must be determined in part from the context in which the term is used. + + + + + + + + + + + + A perspective characterized by the belief that some mereological parts of a whole (holistic parts) are intimately interconnected and explicable only by reference to the whole and vice versa. + An holistic perspective considers each part of the whole as equally important, without the need to position the parts within a hierarchy (in time or space). The interest is on the whole object and on its parts (how they contribute to the whole, i.e. their roles), without going further into specifying the spatial hierarchy or the temporal position of each part. + +This class allows the picking of parts without necessarily going trough a rigid hierarchy of spatial compositions (e.g. body -> organ -> cell -> molecule) or temporal composition. This is inline with the transitive nature of parthood, as it is usually defined in literature. + +The holistic perspective is not excluding the reductionistic perspective, on the contrary it can be considered its complement. + The union of classes whole and part. + Holistic + Wholistic + Holistic + An holistic perspective considers each part of the whole as equally important, without the need to position the parts within a hierarchy (in time or space). The interest is on the whole object and on its parts (how they contribute to the whole, i.e. their roles), without going further into specifying the spatial hierarchy or the temporal position of each part. + +This class allows the picking of parts without necessarily going trough a rigid hierarchy of spatial compositions (e.g. body -> organ -> cell -> molecule) or temporal composition. This is inline with the transitive nature of parthood, as it is usually defined in literature. + +The holistic perspective is not excluding the reductionistic perspective, on the contrary it can be considered its complement. + The union of classes whole and part. + A perspective characterized by the belief that some mereological parts of a whole (holistic parts) are intimately interconnected and explicable only by reference to the whole and vice versa. + A molecule of a body can have role in the body evolution, without caring if its part of a specific organ and without specifying the time interval in which this role occurred. + A product is a role that can be fulfilled by many objects, but always requires a process to which the product participates and from which it is generated. - - + + + + + T0 L+2 M0 I0 Θ0 N0 J0 + + + + + AreaUnit + AreaUnit + + + + + + Physical device (or the chain of devices) that is used to measure, quantify and store the signal after its interaction with the sample. + Detector + Detector + Physical device (or the chain of devices) that is used to measure, quantify and store the signal after its interaction with the sample. + Back Scattered Electrons (BSE) and Secondary Electrons (SE) detectors for SEM + Displacement and force sensors for mechanical testing + + + + - A manufacturing process in which the shape of a workpiece is changed by breaking the material cohesion at the processing point and thus the material cohesion is reduced overall. - SeparateManufacturing - DIN 8580:2020 - CuttingManufacturing - Trennen - SeparateManufacturing - A manufacturing process in which the shape of a workpiece is changed by breaking the material cohesion at the processing point and thus the material cohesion is reduced overall. + FiberReinforcePlasticManufacturing + FiberReinforcePlasticManufacturing + + + + + + FormingFromLiquid + FormingFromLiquid + + + + + + + A soft, solid or solid-like colloid consisting of two or more components, one of which is a liquid, present in substantial quantity. + Gel + Gel + A soft, solid or solid-like colloid consisting of two or more components, one of which is a liquid, present in substantial quantity. + + + + + + + A mixture in which one substance of microscopically dispersed insoluble or soluble particles (from 1 nm to 1 μm) is suspended throughout another substance and that does not settle, or would take a very long time to settle appreciably. + Colloids are characterized by the occurring of the Tyndall effect on light. + Colloid + Colloid + A mixture in which one substance of microscopically dispersed insoluble or soluble particles (from 1 nm to 1 μm) is suspended throughout another substance and that does not settle, or would take a very long time to settle appreciably. + Colloids are characterized by the occurring of the Tyndall effect on light. - - - - A manufacturing with an output that is an object with a specific function, shape, or intended use, not simply a material. - WorkpieceManufacturing - DIN 8580:2020 - ISO 15531-1:2004 -discrete manufacturing: production of discrete items. - ISO 8887-1:2017 -manufacturing: production of components - DiscreteManufacturing - Werkstücke - WorkpieceManufacturing - A manufacturing with an output that is an object with a specific function, shape, or intended use, not simply a material. + + + + + + + + + + + + + SolidMixture + SolidMixture - - + + + + Magnetic flux the integration area of which is such that magnetic field lines cross it in the same orientation more than once. + LinkedFlux + LinkedFlux + https://qudt.org/vocab/quantitykind/MagneticFlux + https://www.wikidata.org/wiki/Q4374882 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-77 + 6-22.2 + Magnetic flux the integration area of which is such that magnetic field lines cross it in the same orientation more than once. + + + + + + + - - + + - - A mixture in which more than one phases of matter cohexists. - Phase heterogenous mixture may share the same state of matter. - -For example, immiscibile liquid phases (e.g. oil and water) constitute a mixture whose phases are clearly separated but share the same state of matter. - PhaseHeterogeneousMixture - PhaseHeterogeneousMixture - A mixture in which more than one phases of matter cohexists. - Phase heterogenous mixture may share the same state of matter. - -For example, immiscibile liquid phases (e.g. oil and water) constitute a mixture whose phases are clearly separated but share the same state of matter. + + Measure of magnetism, taking account of the strength and the extent of a magnetic field. + MagneticFlux + MagneticFlux + http://qudt.org/vocab/quantitykind/MagneticFlux + https://www.wikidata.org/wiki/Q177831 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-21 + https://dbpedia.org/page/Magnetic_flux + 6-22.1 + Measure of magnetism, taking account of the strength and the extent of a magnetic field. + https://en.wikipedia.org/wiki/Magnetic_flux + https://doi.org/10.1351/goldbook.M03684 - + + - - + - quotient of number of acceptor levels and volume. - AcceptorDensity - AcceptorDensity - https://qudt.org/vocab/quantitykind/AcceptorDensity - https://www.wikidata.org/wiki/Q105979968 - 12-29.5 - quotient of number of acceptor levels and volume. + For charged particles of a given type and energy E0 the differential quotient of E with respect to x, where E is the mean energy lost by the charged particles in traversing a distance x in the given material. + TotalLinearStoppingPower + LinearStoppingPower + TotalLinearStoppingPower + https://qudt.org/vocab/quantitykind/TotalLinearStoppingPower + https://www.wikidata.org/wiki/Q908474 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-27 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-12-49 + 10-54 + For charged particles of a given type and energy E0 the differential quotient of E with respect to x, where E is the mean energy lost by the charged particles in traversing a distance x in the given material. + https://doi.org/10.1351/goldbook.S06035 - - - - - Atomic number (proton number) plus neutron number equals mass number. - Number of neutrons in an atomic nucleus. - NeutronNumber - NeutronNumber - https://www.wikidata.org/wiki/Q970319 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-05-34 - 10-1.2 - Number of neutrons in an atomic nucleus. - Atomic number (proton number) plus neutron number equals mass number. - https://en.wikipedia.org/wiki/Neutron_number - https://doi.org/10.1351/goldbook.N04119 + + + + + + + + + + + + + + + + + + + + + BottomAntiQuark + BottomAntiQuark - - - - A pure number, typically the number of something. - According to the SI brochure counting does not automatically qualify a quantity as an amount of substance. + + + + + + + + + + + + A process occurring with the active participation of an agent that drives the process according to a specific objective (intention). + IntentionalProcess + Project + IntentionalProcess + A process occurring with the active participation of an agent that drives the process according to a specific objective (intention). + -This quantity is used only to describe the outcome of a counting process, without regard of the type of entities. + + + + + + + + + + + + + + + + + + + + A world entity is direct causally self-connected if any two parts that make up the whole are direct causally connected to each other. In the EMMO, topological connectivity is based on causality. +All physical objects, i.e. entities whose behaviour is explained by physics laws, are represented only by items. In other words, a physical object part is embedded in a direct causal graph that provides always a path between two of its parts. +Members of a collection lack such direct causality connection, i.e. they do not constitute a physical object. -There are also some quantities that cannot be described in terms of the seven base quantities of the SI, but have the nature of a count. Examples are a number of molecules, a number of cellular or biomolecular entities (for example copies of a particular nucleic acid sequence), or degeneracy in quantum mechanics. Counting quantities are also quantities with the associated unit one. - PureNumberQuantity - PureNumberQuantity - A pure number, typically the number of something. - 1, -i, -π, -the number of protons in the nucleus of an atom +Following graph theory concepts, the quantums of an item are all connected together within a network of causal relations, forming a connected causal graph. A collection is then a set of disconnected graphs. + The class of individuals standing for direct causally self-connected world entities. + The disjoint union of Elementary, Quantum and CausalSystem classes. + Item + Item + A world entity is direct causally self-connected if any two parts that make up the whole are direct causally connected to each other. In the EMMO, topological connectivity is based on causality. +All physical objects, i.e. entities whose behaviour is explained by physics laws, are represented only by items. In other words, a physical object part is embedded in a direct causal graph that provides always a path between two of its parts. +Members of a collection lack such direct causality connection, i.e. they do not constitute a physical object. + +Following graph theory concepts, the quantums of an item are all connected together within a network of causal relations, forming a connected causal graph. A collection is then a set of disconnected graphs. + The disjoint union of Elementary, Quantum and CausalSystem classes. + The class of individuals standing for direct causally self-connected world entities. - - - - - - - - - - - - - GasMixture - GasMixture + + + + + Ratio of specific heat capacity at constant pressure cp to specific heat capacity at constant volume cV, thus γ = cp/cV. + RatioOfSpecificHeatCapacities + RatioOfSpecificHeatCapacities + https://qudt.org/vocab/quantitykind/HeatCapacityRatio + https://www.wikidata.org/wiki/Q503869 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-51 + 5-17.1 + Ratio of specific heat capacity at constant pressure cp to specific heat capacity at constant volume cV, thus γ = cp/cV. - - - - - - A path is a string of characters used to uniquely identify a location in a directory structure according to a particular convention. - Path - Path - A path is a string of characters used to uniquely identify a location in a directory structure according to a particular convention. - /etc/fstab (UNIX-like path) -C:\\Users\\John\\Desktop (DOS-like path) + + + + + + + + + + + + + + Measure for how the magnetization of material is affected by the application of an external magnetic field . + Permeability + ElectromagneticPermeability + Permeability + http://qudt.org/vocab/quantitykind/ElectromagneticPermeability + 6-26.2 + https://doi.org/10.1351/goldbook.P04503 - + - T-3 L+1 M+1 I0 Θ-1 N0 J0 + T-1 L-2 M+1 I0 Θ0 N0 J0 - ThermalConductivityUnit - ThermalConductivityUnit - - - - - - Impedimetric sensors are based on measurement of a concentration-dependent parameter taken from analysis of the respective electrochemical impedance spectra, or from the impedance magnitudes at a chosen fixed frequency. - The sinusoidal current response lags behind the sinusoidal voltage perturbation by a phase angle φ. Resistances (e.g. to charge transfer) give a response in phase with the voltage perturbation; capacitances (e.g. double layer) give a response 90° out of phase; combinations of resistances and capacitances give phase angles between 0 and 90°. Plots of the out of phase vs. the in phase component of the impedance for all the frequencies tested are called complex plane (or Nyquist) plots. Plots of the phase angle and the magnitude of the impedance vs. the logarithm of perturbation frequency are called Bode diagrams. Complex plane plots are the more commonly used for electrochemical sensors. - electrochemical measurement method of the complex impedance of an electrochemical system as a function of the frequency of a small amplitude (normally 5 to 10 mV) sinusoidal voltage perturbation superimposed on a fixed value of applied potential or on the open circuit potential - - ElectrochemicalImpedanceSpectroscopy - EIS - ElectrochemicalImpedanceSpectroscopy - https://www.wikidata.org/wiki/Q3492904 - electrochemical measurement method of the complex impedance of an electrochemical system as a function of the frequency of a small amplitude (normally 5 to 10 mV) sinusoidal voltage perturbation superimposed on a fixed value of applied potential or on the open circuit potential - https://doi.org/10.1515/pac-2018-0109 + MassFluxUnit + MassFluxUnit - - - - measurement principle in which the complex electric impedance of a system is measured, usually as a function of a small amplitude sinusoidal electrode potential - - Impedimetry - Impedimetry - measurement principle in which the complex electric impedance of a system is measured, usually as a function of a small amplitude sinusoidal electrode potential - https://doi.org/10.1515/pac-2018-0109 + + + + A grammar for annotating a document in a way that is syntactically distinguishable from the text. + MarkupLanguage + MarkupLanguage + A grammar for annotating a document in a way that is syntactically distinguishable from the text. + HTML + https://en.wikipedia.org/wiki/Markup_language - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + - - - - - - + + - - A conventional referring to an object according to a specific code that reflects the results of a specific interaction mechanism and is shared between other interpreters. -A coded is always a partial representation of an object since it reflects the object capability to be part of a specific determination. -A coded is a sort of name or label that we put upon objects that interact with an determiner in the same specific way. - -For example, "hot" objects are objects that interact with an observer through a perception mechanism aimed to perceive an heat source. The code is made of terms such as "hot", "warm", "cold", that commonly refer to the perception of heat. - A conventional that stands for an object according to a code of interpretation to which the interpreter refers. - Let's define the class Colour as the subclass of the coded signs that involve photon emission and electromagnetic radiation sensible observers. -An individual C of this class Colour can be defined be declaring the process individual (e.g. daylight illumination) and the observer (e.g. my eyes) -Stating that an entity E hasCoded C, we mean that it can be observed by such setup of process + observer (i.e. observed by my eyes under daylight). -This definition can be specialised for human eye perception, so that the observer can be a generic human, or to camera perception so that the observer can be a device. -This can be used in material characterization, to define exactly the type of measurement done, including the instrument type. - Coded - Coded - A conventional that stands for an object according to a code of interpretation to which the interpreter refers. - A biography that makes use of a code that is provided by the meaning of the element of the language used by the author. - The name "red" that stands for the color of an object. + + Vector potential of the magnetic flux density. + MagneticVectorPotential + MagneticVectorPotential + https://qudt.org/vocab/quantitykind/MagneticVectorPotential + https://www.wikidata.org/wiki/Q2299100 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-23 + 6-32 + Vector potential of the magnetic flux density. - - - - - - - - - - + + + + + - - - - - - + + - - A 'Sign' that stands for an 'Object' through convention, norm or habit, without any resemblance to it. - In Peirce semiotics this kind of sign category is called symbol. However, since symbol is also used in formal languages, the name is changed in conventional. - Conventional - Conventional - A 'Sign' that stands for an 'Object' through convention, norm or habit, without any resemblance to it. + + One-sixth of the mean square distance between the point where a neutron enters a specified class and the point where it leaves this class. + DiffusionArea + DiffusionArea + https://qudt.org/vocab/quantitykind/DiffusionArea + https://www.wikidata.org/wiki/Q98966292 + 10-72.2 + One-sixth of the mean square distance between the point where a neutron enters a specified class and the point where it leaves this class. - - + + - Describes the main input parameters that are needed to acquire the signal + The current vs. potential (I-E) curve is called a voltammogram. + Voltammetry is an analytical technique based on the measure of the current flowing through an electrode dipped in a solution containing electro-active compounds, while a potential scanning is imposed upon it. - MeasurementParameter - MeasurementParameter - Describes the main input parameters that are needed to acquire the signal - - - - - - A variable whose value is assumed to be known independently from the equation, but whose value is not explicitated in the equation. - Parameter - Parameter - Viscosity in the Navier-Stokes equation + Voltammetry + Voltammetry + https://www.wikidata.org/wiki/Q904093 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-04-11 + Voltammetry is an analytical technique based on the measure of the current flowing through an electrode dipped in a solution containing electro-active compounds, while a potential scanning is imposed upon it. + https://en.wikipedia.org/wiki/Voltammetry + https://doi.org/10.1515/pac-2018-0109 - - - - - - + + - - + + T-1 L-4 M+1 I0 Θ0 N0 J0 - + + - One-dimensional subspace of space-time, which is locally orthogonal to space. - The indefinite continued progress of existence and events that occur in apparently irreversible succession from the past through the present to the future. - Time can be seen as the duration of an event or, more operationally, as "what clocks read". - Time - Time - http://qudt.org/vocab/quantitykind/Time - One-dimensional subspace of space-time, which is locally orthogonal to space. - 3-7 - The indefinite continued progress of existence and events that occur in apparently irreversible succession from the past through the present to the future. - https://doi.org/10.1351/goldbook.T06375 - - - - - - Spacing - Spacing - - - - - - Subclasses of 'Symbol' are alphabets, in formal languages terminology. A 'Symbol' is atomic for that alphabet, i.e. it has no parts that are symbols for the same alphabet. -e.g. a math symbol is not made of other math symbols -A Symbol may be a String in another language. -e.g. "Bq" is the symbol for Becquerel units when dealing with metrology, or a string of "B" and "q" symbols when dealing with characters. - The class of individuals that stand for an elementary mark of a specific symbolic code (alphabet). - Symbol - AlphabeticEntity - Symbol - The class of individuals that stand for an elementary mark of a specific symbolic code (alphabet). - The class of letter "A" is the symbol as idea and the letter A that you see on the screen is the mark that can be represented by an individual belonging to "A". - Subclasses of 'Symbol' are alphabets, in formal languages terminology. A 'Symbol' is atomic for that alphabet, i.e. it has no parts that are symbols for the same alphabet. -e.g. a math symbol is not made of other math symbols -A Symbol may be a String in another language. -e.g. "Bq" is the symbol for Becquerel units when dealing with metrology, or a string of "B" and "q" symbols when dealing with characters. - Symbols of a formal language need not be symbols of anything. For instance there are logical constants which do not refer to any idea, but rather serve as a form of punctuation in the language (e.g. parentheses). - -Symbols of a formal language must be capable of being specified without any reference to any interpretation of them. -(Wikipedia) - The class is the idea of the symbol, while the individual of that class stands for a specific mark (or token) of that idea. - - - - - - The term "Uniform Resource Locator" (URL) refers to the subset of URIs that, in addition to identifying a resource, provide a means of locating the resource by describing its primary access mechanism (e.g., its network "location"). - URL - URL - The term "Uniform Resource Locator" (URL) refers to the subset of URIs that, in addition to identifying a resource, provide a means of locating the resource by describing its primary access mechanism (e.g., its network "location"). - - - - - - A Uniform Resource Identifier (URI) is a compact sequence of characters that identifies an abstract or physical resource. - URI = scheme ":" ["//" authority] path ["?" query] ["#" fragment] - URI - URI - https://en.wikipedia.org/wiki/File:URI_syntax_diagram.svg - A Uniform Resource Identifier (URI) is a compact sequence of characters that identifies an abstract or physical resource. - URI = scheme ":" ["//" authority] path ["?" query] ["#" fragment] + MassPerQuarticLengthTimeUnit + MassPerQuarticLengthTimeUnit - - - - Differential scanning calorimetry (DSC) is a thermoanalytical technique in which the difference in the amount of heat required to increase the temperature of a sample and reference is measured as a function of temperature. Both the sample and reference are maintained at nearly the same temperature throughout the experiment. Generally, the temperature program for a DSC analysis is designed such that the sample holder temperature increases linearly as a function of time. The reference sample should have a well-defined heat capacity over the range of temperatures to be scanned. Additionally, the reference sample must be stable, of high purity, and must not experience much change across the temperature scan. Typically, reference standards have been metals such as indium, tin, bismuth, and lead, but other standards such as polyethylene and fatty acids have been proposed to study polymers and organic compounds, respectively. - - DifferentialScanningCalorimetry - DSC - DifferentialScanningCalorimetry - Differential scanning calorimetry (DSC) is a thermoanalytical technique in which the difference in the amount of heat required to increase the temperature of a sample and reference is measured as a function of temperature. Both the sample and reference are maintained at nearly the same temperature throughout the experiment. Generally, the temperature program for a DSC analysis is designed such that the sample holder temperature increases linearly as a function of time. The reference sample should have a well-defined heat capacity over the range of temperatures to be scanned. Additionally, the reference sample must be stable, of high purity, and must not experience much change across the temperature scan. Typically, reference standards have been metals such as indium, tin, bismuth, and lead, but other standards such as polyethylene and fatty acids have been proposed to study polymers and organic compounds, respectively. + + + + + T+4 L-2 M-1 I+2 Θ0 N0 J0 + + + + + CapacitanceUnit + CapacitanceUnit - + + - Forming of a solid body, whereby the plastic state is essentially brought about by a combined tensile and compressive stress. - TensileForming - Zugdruckumformen - TensileForming + Extrusion + Extrusion @@ -7736,953 +5410,1376 @@ Symbols of a formal language must be capable of being specified without any refe The mass of the raw part is equal to the mass of the finished part. - - - - Property of a solute in a solution. - StandardAbsoluteActivity - StandardAbsoluteActivityInASolution - StandardAbsoluteActivity - https://www.wikidata.org/wiki/Q89485936 - 9-26 - Property of a solute in a solution. + + + + FormingFromPlastic + FormingFromPlastic - - - - A computational application that uses an empiric equation to predict the behaviour of a system without relying on the knowledge of the actual physical phenomena occurring in the object. - EmpiricalSimulationSoftware - EmpiricalSimulationSoftware - A computational application that uses an empiric equation to predict the behaviour of a system without relying on the knowledge of the actual physical phenomena occurring in the object. + + + + + + + + + + + Process representing the interaction between the Probe and the Sample (with a certain Interaction Volume) which generates a Signal + + ProbeSampleInteraction + ProbeSampleInteraction + Process representing the interaction between the Probe and the Sample (with a certain Interaction Volume) which generates a Signal - - + + + + In some cases, (like tribological characterisations) the “sample” can also be the “probe”. When analysing a system of samples that interact each other, finding a clear definition can become a complex problem. + The volume of material, and the surrounding environment, that interacts with the probe and generate a detectable (measurable) signal (information). + + InteractionVolume + InteractionVolume + The volume of material, and the surrounding environment, that interacts with the probe and generate a detectable (measurable) signal (information). + In Scanning Electron Microscopy (SEM), the interaction volume is the volume of material that interacts directly with the incident electron beam, is usually much smaller than the entire specimen’s volume, and can be computed by using proper models. The interaction between the scanning probe and the sample generates a series of detectable signals (back scattered electrons, secondary electrons, x-rays, specimen current, etc.) which contain information on sample morphology, microstructure, composition, etc. + In x-ray diffraction, the interaction volume is the volume of material that interacts directly with the x-ray beam and is usually smaller than the volume of the entire specimen. Depending on sample’s structure and microstructure, the interaction between the sample and the x-ray incident beam generates a secondary (reflected) beam that is measured by a detector and contains information on certain sample’s properties (e.g., crystallographic structure, phase composition, grain size, residual stress, …). + In some cases, (like tribological characterisations) the “sample” can also be the “probe”. When analysing a system of samples that interact each other, finding a clear definition can become a complex problem. + It is important to note that, in some cases, the volume of interaction could be different from the volume of detectable signal emission. Example: in Scanning Electron Microscopy (SEM), the volume of interaction between the electron probe and the material is different from the volumes that generate the captured signal. + + + + + + + Quotient of the traversed circular path length of a point in space during a rotation and its distance from the axis or centre of rotation. + RotationalDisplacement + AngularDisplacement + RotationalDisplacement + https://www.wikidata.org/wiki/Q3305038 + 3-6 + Quotient of the traversed circular path length of a point in space during a rotation and its distance from the axis or centre of rotation. + https://en.wikipedia.org/wiki/Angular_displacement + + + - Dimensionless quantity in electromagnetism. - QualityFactor - QualityFactor - https://qudt.org/vocab/quantitykind/QualityFactor - https://www.wikidata.org/wiki/Q79467569 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=151-15-45 - 6-53 - Dimensionless quantity in electromagnetism. + Ratio of circular arc length to radius. + Angle + PlaneAngle + Angle + http://qudt.org/vocab/quantitykind/PlaneAngle + Ratio of circular arc length to radius. + 3-5 + https://doi.org/10.1351/goldbook.A00346 - - + + + + + + + + + + + + + Measure of voltage induced by change of temperature. + SeebeckCoefficient + SeebeckCoefficient + https://qudt.org/vocab/quantitykind/SeebeckCoefficient + https://www.wikidata.org/wiki/Q1091448 + 12-21 + Measure of voltage induced by change of temperature. + + + + + + + + + + + + + + + Charge number is a quantity of dimension one defined in ChargeNumber. + For all types of ions in a solution, half the sum of the products of their molality b_i and the square of their charge number z_i. + IonicStrength + IonicStrength + https://qudt.org/vocab/quantitykind/IonicStrength + https://www.wikidata.org/wiki/Q898396 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-01-24 + 9-42 + For all types of ions in a solution, half the sum of the products of their molality b_i and the square of their charge number z_i. + https://doi.org/10.1351/goldbook.I03180 + + + + + + + + + + + + + + + + Since the nucleus account for nearly all of the total mass of atoms (with the electrons and nuclear binding energy making minor contributions), the atomic mass measured in Da has nearly the same value as the mass number. + The atomic mass is often expressed as an average of the commonly found isotopes. + The mass of an atom in the ground state. + AtomicMass + AtomicMass + The mass of an atom in the ground state. + 10-4.1 + https://en.wikipedia.org/wiki/Atomic_mass + https://doi.org/10.1351/goldbook.A00496 + + + + + - The class of individuals that stand for photons elementary particles. - Photon - Photon - The class of individuals that stand for photons elementary particles. - https://en.wikipedia.org/wiki/Photon + RedDownAntiQuark + RedDownAntiQuark + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + RedAntiQuark + RedAntiQuark + + + + + + + + + + + + + + + + + + + + + + + DownAntiQuark + DownAntiQuark - - + + + - ISO80000Categorised - ISO80000Categorised + In nuclear physics, energy imparted per mass. + SpecificEnergyImparted + SpecificEnergyImparted + https://qudt.org/vocab/quantitykind/SpecificEnergyImparted + https://www.wikidata.org/wiki/Q99566195 + 10-81.2 + In nuclear physics, energy imparted per mass. - + + - + - + - inverse of the mass density ρ, thus v = 1/ρ. - SpecificVolume - MassicVolume - SpecificVolume - https://qudt.org/vocab/quantitykind/SpecificVolume - https://www.wikidata.org/wiki/Q683556 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-09 - 4-3 - inverse of the mass density ρ, thus v = 1/ρ. - https://doi.org/10.1351/goldbook.S05807 + Energy per unit mass + SpecificEnergy + SpecificEnergy + https://qudt.org/vocab/quantitykind/SpecificEnergy + https://www.wikidata.org/wiki/Q3023293 + https://dbpedia.org/page/Specific_energy + 5-21.1 + Energy per unit mass + https://en.wikipedia.org/wiki/Specific_energy - - - + + + - In an infinite homogenous medium, one-sixth of the mean square of the distance between the neutron source and the point where a neutron reaches a given energy. - SlowingDownArea - SlowingDownArea - https://qudt.org/vocab/quantitykind/Slowing-DownArea - https://www.wikidata.org/wiki/Q98950918 - 10-72.1 - In an infinite homogenous medium, one-sixth of the mean square of the distance between the neutron source and the point where a neutron reaches a given energy. + Quotient of mechanical output and input power. + MechanicalEfficiency + MechanicalEfficiency + https://www.wikidata.org/wiki/Q2628085 + 4-29 + Quotient of mechanical output and input power. - - - - - - - - - - - - - - Extent of a surface. - Area - Area - http://qudt.org/vocab/quantitykind/Area - 3-3 - https://doi.org/10.1351/goldbook.A00429 + + + + + + + + + + + + + + + A charged vector boson that mediate the weak interaction. + WBoson + ChargedWeakBoson + IntermediateVectorBoson + WBoson + A charged vector boson that mediate the weak interaction. + https://en.wikipedia.org/wiki/W_and_Z_bosons - - - - Foaming - Foaming + + + + + + + + + + + + + + + WeakBoson + WeakBoson - - + + - FormingFromLiquid - FormingFromLiquid + A WorkPiece is physical artifact, that has a proper shape and occupyes a proper volume intended for subsequent transformation. It is a condensed state, so it is a compact body that is processed or has to be processed. + A solid is defined as a portion of matter that is in a condensed state characterised by resistance to deformation and volume changes. + In manufacturing, a workpiece is a single, delimited part of largely solid material that is processed in some form (e.g. stone ). + In physics, a rigid body (also known as a rigid object[2]) is a solid body in which deformation is zero or so small it can be neglected. The distance between any two given points on a rigid body remains constant in time regardless of external forces or moments exerted on it. A rigid body is usually considered as a continuous distribution of mass. + It has a shape, so we conclude that it is solid + Object that is processed with a machine + Seems to have to be processed through mechanical deformation. So it takes part of a manufacturing process. It is a Manufactured Product and it can be a Commercial Product + The raw material or partially finished piece that is shaped by performing various operations. + They are not powders or threads + a physical artifact, real or virtual, intended for subsequent transformation within some manufacturing operation + fili e polveri non sono compresi + it seems to be an intermediate product, that has to reach the final shape. + it seems to be solid, so it has a proper shape + powder is not workpiece because it has the shape of the recipient containing them + WorkPiece + Werkstück + WorkPiece + A WorkPiece is physical artifact, that has a proper shape and occupyes a proper volume intended for subsequent transformation. It is a condensed state, so it is a compact body that is processed or has to be processed. - - + + + + Diffusion coefficient through the pore space of a porous media. + EffectiveDiffusionCoefficient + EffectiveDiffusionCoefficient + https://www.wikidata.org/wiki/Q258852 + Diffusion coefficient through the pore space of a porous media. + + + + + + + A programming language entity expressing a formal detailed plan of what a software is intended to do. + A source code is the companion of an application, being it the entity used to generate the application list of CPU executable instructions. + SourceCode + SourceCode + A programming language entity expressing a formal detailed plan of what a software is intended to do. + A source code is the companion of an application, being it the entity used to generate the application list of CPU executable instructions. + Source code (also referred to as source or code) is the version of software as it is originally written (i.e., typed into a computer) by a human in plain text (i.e., human readable alphanumeric characters). + + + + - Describes the level of automation of the test. + Extended X-ray absorption fine structure (EXAFS), along with X-ray absorption near edge structure (XANES), is a subset of X-ray absorption spectroscopy (XAS). Like other absorption spectroscopies, XAS techniques follow Beer's law. The X-ray absorption coefficient of a material as a function of energy is obtained by directing X-rays of a narrow energy range at a sample, while recording the incident and transmitted x-ray intensity, as the incident x-ray energy is incremented. +When the incident x-ray energy matches the binding energy of an electron of an atom within the sample, the number of x-rays absorbed by the sample increases dramatically, causing a drop in the transmitted x-ray intensity. This results in an absorption edge. Every element has a set of unique absorption edges corresponding to different binding energies of its electrons, giving XAS element selectivity. XAS spectra are most often collected at synchrotrons because of the high intensity of synchrotron X-ray sources allow the concentration of the absorbing element to reach as low as a few parts per million. Absorption would be undetectable if the source is too weak. Because X-rays are highly penetrating, XAS samples can be gases, solids or liquids. - LevelOfAutomation - LevelOfAutomation - Describes the level of automation of the test. + Exafs + Exafs + Extended X-ray absorption fine structure (EXAFS), along with X-ray absorption near edge structure (XANES), is a subset of X-ray absorption spectroscopy (XAS). Like other absorption spectroscopies, XAS techniques follow Beer's law. The X-ray absorption coefficient of a material as a function of energy is obtained by directing X-rays of a narrow energy range at a sample, while recording the incident and transmitted x-ray intensity, as the incident x-ray energy is incremented. +When the incident x-ray energy matches the binding energy of an electron of an atom within the sample, the number of x-rays absorbed by the sample increases dramatically, causing a drop in the transmitted x-ray intensity. This results in an absorption edge. Every element has a set of unique absorption edges corresponding to different binding energies of its electrons, giving XAS element selectivity. XAS spectra are most often collected at synchrotrons because of the high intensity of synchrotron X-ray sources allow the concentration of the absorbing element to reach as low as a few parts per million. Absorption would be undetectable if the source is too weak. Because X-rays are highly penetrating, XAS samples can be gases, solids or liquids. - - - - "Property of a phenomenon, body, or substance, where the property has no magnitude." - -"A nominal property has a value, which can be expressed in words, by alphanumerical codes, or by other means." + + + + + T0 L-1 M0 I0 Θ0 N0 J0 + + + + + ReciprocalLengthUnit + ReciprocalLengthUnit + -International vocabulary of metrology (VIM) - An 'ObjectiveProperty' that cannot be quantified. - NominalProperty - NominalProperty - An 'ObjectiveProperty' that cannot be quantified. - CFC is a 'sign' that stands for the fact that the morphology of atoms composing the microstructure of an entity is predominantly Cubic Face Centered + + + + chronopotentiometry where the applied current is changed linearly + + LinearChronopotentiometry + LinearChronopotentiometry + chronopotentiometry where the applied current is changed linearly + -A color is a nominal property. + + + + The FIB-DIC (Focused Ion Beam - Digital Image Correlation) ring-core technique is a powerful method for measuring residual stresses in materials. It is based on milling a ring-shaped sample, or core, from the material of interest using a focused ion beam (FIB). + + FibDic + FIBDICResidualStressAnalysis + FibDic + The FIB-DIC (Focused Ion Beam - Digital Image Correlation) ring-core technique is a powerful method for measuring residual stresses in materials. It is based on milling a ring-shaped sample, or core, from the material of interest using a focused ion beam (FIB). + -Sex of a human being. - nominal property + + + + Mechanical testing covers a wide range of tests, which can be divided broadly into two types: +1. those that aim to determine a material's mechanical properties, independent of geometry. +2. those that determine the response of a structure to a given action, e.g. testing of composite beams, aircraft structures to destruction, etc. + + MechanicalTesting + MechanicalTesting + Mechanical testing covers a wide range of tests, which can be divided broadly into two types: +1. those that aim to determine a material's mechanical properties, independent of geometry. +2. those that determine the response of a structure to a given action, e.g. testing of composite beams, aircraft structures to destruction, etc. + https://en.wikipedia.org/wiki/Mechanical_testing - - - - - - - - - - - + + + - At a given point within a domain of quasi-infinitesimal volume V, vector quantity equal to the magnetic area moment m of the substance contained within the domain divided by the volume V. - Magnetization - Magnetization - https://qudt.org/vocab/quantitykind/Magnetization - https://www.wikidata.org/wiki/Q856711 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-52 - 6-24 - At a given point within a domain of quasi-infinitesimal volume V, vector quantity equal to the magnetic area moment m of the substance contained within the domain divided by the volume V. + Factor taking into account health effects in the determination of the dose equivalent. + QualityFactor + QualityFactor + https://qudt.org/vocab/quantitykind/DoseEquivalentQualityFactor + https://www.wikidata.org/wiki/Q2122099 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-14-03 + 10-82 + Factor taking into account health effects in the determination of the dose equivalent. - + - T-1 L0 M0 I0 Θ0 N0 J0 + T0 L+1 M+1 I0 Θ0 N0 J0 - FrequencyUnit - FrequencyUnit + LengthMassUnit + LengthMassUnit - - - + + - Expectation value of the energy imparted. - MeanEnergyImparted - MeanEnergyImparted - https://qudt.org/vocab/quantitykind/MeanEnergyImparted - https://www.wikidata.org/wiki/Q99526969 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-12-44 - 10-80.2 - Expectation value of the energy imparted. + Voltage phasor multiplied by complex conjugate of the current phasor. + ComplexPower + ComplexApparentPower + ComplexPower + https://qudt.org/vocab/quantitykind/ComplexPower + https://www.wikidata.org/wiki/Q65239736 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-11-39 + 6-59 + Voltage phasor multiplied by complex conjugate of the current phasor. - - - - - T-1 L-4 M+1 I0 Θ0 N0 J0 - - - + + + + - MassPerQuarticLengthTimeUnit - MassPerQuarticLengthTimeUnit + Ratio of the partial pressure p of water vapour in moist air to its partial pressure psat at saturation, at the same temperature φ = p/psat. + The relative humidity is often expressed in per cent. + RelativeHumidity + RelativeHumidity + https://qudt.org/vocab/quantitykind/RelativeHumidity + https://www.wikidata.org/wiki/Q2499617 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-65 + 5-33 + Ratio of the partial pressure p of water vapour in moist air to its partial pressure psat at saturation, at the same temperature φ = p/psat. + https://en.wikipedia.org/wiki/Humidity#Relative_humidity - - - + + + - In condensed matter physics, the square root of the product of diffusion coefficient and lifetime. - DiffusionLength - DiffusionLength - https://qudt.org/vocab/quantitykind/SolidStateDiffusionLength - https://www.wikidata.org/wiki/Q106097176 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=521-02-60 - 12-33 - In condensed matter physics, the square root of the product of diffusion coefficient and lifetime. + For normal cases, the relative humidity may be assumed to be equal to relative mass concentration of vapour. + ratio of the mass concentration of water vapour v to its mass concentration at saturation vsat, at the same temperature, thus ψ = v/vsat. + RelativeMassConcentrationOfWaterVapour + RelativeMassConcentrationOfWaterVapour + https://qudt.org/vocab/quantitykind/RelativeMassConcentrationOfVapour + https://www.wikidata.org/wiki/Q76379357 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-66 + ratio of the mass concentration of water vapour v to its mass concentration at saturation vsat, at the same temperature, thus ψ = v/vsat. - - - - Parameter used for the sample inspection process - - SampleInspectionParameter - SampleInspectionParameter - Parameter used for the sample inspection process + + + + Removal of material by means of rigid or flexible discs or belts containing abrasives. + Grinding + Schleifen + Grinding - - + + + + + Dissociation may occur stepwise. + ratio of the number of dissociation events to the maximum number of theoretically possible dissociation events. + DegreeOfDissociation + DissociationFraction + DegreeOfDissociation + https://qudt.org/vocab/quantitykind/DegreeOfDissociation + https://www.wikidata.org/wiki/Q907334 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-01-09 + 9-43 + ratio of the number of dissociation events to the maximum number of theoretically possible dissociation events. + https://doi.org/10.1351/goldbook.D01566 + + + + + + An elementary bosonic particle with zero spin produced by the quantum excitation of the Higgs field. + HiggsBoson + HiggsBoson + An elementary bosonic particle with zero spin produced by the quantum excitation of the Higgs field. + https://en.wikipedia.org/wiki/Higgs_boson + + + + + + + + + + + + + + + + + + + + + + A boson that is a single elementary particle. + A particle with integer spin that follows Bose–Einstein statistics. + FundamentalBoson + FundamentalBoson + A particle with integer spin that follows Bose–Einstein statistics. + A boson that is a single elementary particle. + https://en.wikipedia.org/wiki/Boson#Elementary_bosons + + + + - + - Measure of probability that a specific process will take place in a collision of two particles. - AtomicPhysicsCrossSection - AtomicPhysicsCrossSection - https://qudt.org/vocab/quantitykind/Cross-Section.html - https://www.wikidata.org/wiki/Q17128025 - 10-38.1 - Measure of probability that a specific process will take place in a collision of two particles. + ratio of the number of dissociated molecules of a specified type to the total number of dissolved molecules of this type. + DissociationConstant + DissociationConstant + https://www.wikidata.org/wiki/Q898254 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-01-10 + ratio of the number of dissociated molecules of a specified type to the total number of dissolved molecules of this type. - - - + + + - Measure of the change of amplitude and phase angle of a plane wave propagating in a given direction. - PropagationCoefficient - PropagationCoefficient - https://qudt.org/vocab/quantitykind/PropagationCoefficient.html - https://www.wikidata.org/wiki/Q1434913 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-10-18 - 3-26.3 - Measure of the change of amplitude and phase angle of a plane wave propagating in a given direction. + The physical dimension can change based on the stoichiometric numbers of the substances involved. + for solutions, product for all substances B of concentration c_B of substance B in power of its stoichiometric number v_B: K_p = \sum_B{c_B^{v_B}}. + EquilibriumConstant + EquilibriumConstantConcentrationBasis + EquilibriumConstant + https://qudt.org/vocab/quantitykind/EquilibriumConstant + https://www.wikidata.org/wiki/Q857809 + for solutions, product for all substances B of concentration c_B of substance B in power of its stoichiometric number v_B: K_p = \sum_B{c_B^{v_B}}. + https://en.wikipedia.org/wiki/Equilibrium_constant + https://doi.org/10.1351/goldbook.E02177 - - - - - - - - - - + + + - The inverse of length. - ReciprocalLength - InverseLength - ReciprocalLength - http://qudt.org/vocab/quantitykind/InverseLength - The inverse of length. - https://en.wikipedia.org/wiki/Reciprocal_length + Scalar quantity or tensor quantity equal to the absolute permeability divided by the magnetic constant. + RelativePermeability + RelativePermeability + https://qudt.org/vocab/quantitykind/ElectromagneticPermeabilityRatio + https://www.wikidata.org/wiki/Q77785645 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-12-29 + 6-27 + Scalar quantity or tensor quantity equal to the absolute permeability divided by the magnetic constant. + https://doi.org/10.1351/goldbook.R05272 - - - - In chemistry and thermodynamics, calorimetry (from Latin calor 'heat', and Greek μέτρον (metron) 'measure') is the science or act of measuring changes in state variables of a body for the purpose of deriving the heat transfer associated with changes of its state due, for example, to chemical reactions, physical changes, or phase transitions under specified constraints. Calorimetry is performed with a calorimeter. - Calorimetry - Calorimetry - In chemistry and thermodynamics, calorimetry (from Latin calor 'heat', and Greek μέτρον (metron) 'measure') is the science or act of measuring changes in state variables of a body for the purpose of deriving the heat transfer associated with changes of its state due, for example, to chemical reactions, physical changes, or phase transitions under specified constraints. Calorimetry is performed with a calorimeter. + + + + + T-2 L0 M0 I0 Θ+1 N0 J0 + + + + + TemperaturePerSquareTimeUnit + TemperaturePerSquareTimeUnit - - - - + + + + - + - - The velocity depends on the choice of the reference frame. Proper transformation between frames must be used: Galilean for non-relativistic description, Lorentzian for relativistic description. + Extend of a spatial dimension. + Length is a non-negative additive quantity attributed to a one-dimensional object in space. + Length + Length + http://qudt.org/vocab/quantitykind/Length + 3-1.1 + Extend of a spatial dimension. + https://doi.org/10.1351/goldbook.L03498 + --- IEC, note 2 - The velocity is related to a point described by its position vector. The point may localize a particle, or be attached to any other object such as a body or a wave. + + + + A physical made of more than one symbol sequentially arranged. + A string is made of concatenated symbols whose arrangement is one-dimensional. Each symbol can have only one previous and one next neighborhood (bidirectional list). + String + String + A physical made of more than one symbol sequentially arranged. + The word "cat" considered as a collection of 'symbol'-s respecting the rules of english language. --- IEC, note 1 - Vector quantity giving the rate of change of a position vector. +In this example the 'symbolic' entity "cat" is not related to the real cat, but it is only a word (like it would be to an italian person that ignores the meaning of this english word). --- ISO 80000-3 - Velocity - Velocity - http://qudt.org/vocab/quantitykind/Velocity - https://www.wikidata.org/wiki/Q11465 - Vector quantity giving the rate of change of a position vector. +If an 'interpreter' skilled in english language is involved in a 'semiotic' process with this word, that "cat" became also a 'sign' i.e. it became for the 'interpreter' a representation for a real cat. + A string is made of concatenated symbols whose arrangement is one-dimensional. Each symbol can have only one previous and one next neighborhood (bidirectional list). + A string is not requested to respect any syntactic rule: it's simply directly made of symbols. + --- ISO 80000-3 - 3-8.1 - 3‑10.1 + + + + A whole with spatial parts of its same type. + SpatiallyRedundant + SpatiallyRedundant + A whole with spatial parts of its same type. - - - + + + + + + + + + + + + + A whole possessing some proper parts of its same type. + Redundant + NonMaximal + Redundant + A whole possessing some proper parts of its same type. + An object A which is classified as water-fluid possesses a proper part B which is water itself if the lenght scale of the B is larger than the water intermolecular distance keeping it in the continuum range. In this sense, A is redundant. + +If A is a water-fluid so small that its every proper part is no more a continuum object (i.e. no more a fluid), then A is fundamental. + + + + + + + StaticFrictionForce + StaticFriction + StaticFrictionForce + https://qudt.org/vocab/quantitykind/StaticFriction + https://www.wikidata.org/wiki/Q90862568 + 4-9.3 + + + + + + + - - + + - - 1-dimensional array who's spatial direct parts are numbers. - Vector - 1DArray - LinearArray - Vector - 1-dimensional array who's spatial direct parts are numbers. + + Any interaction that, when unopposed, will change the motion of an object + Force + Force + http://qudt.org/vocab/quantitykind/Force + 4-9.1 + Any interaction that, when unopposed, will change the motion of an object + https://doi.org/10.1351/goldbook.F02480 - + + - + - Length per unit time. - -Speed in the absolute value of the velocity. - Speed - Speed - http://qudt.org/vocab/quantitykind/Speed - 3-8.2 - https://doi.org/10.1351/goldbook.S05852 - - - - - - A manufacturing in which the product is a solid body with a well defined geometrical shape made from shapeless original material parts, whose cohesion is created during the process. - ArchetypeManufacturing - DIN 8580:2020 - PrimitiveForming - Urformen - ArchetypeManufacturing - A manufacturing in which the product is a solid body with a well defined geometrical shape made from shapeless original material parts, whose cohesion is created during the process. + Time derivative of exposure. + ExposureRate + ExposureRate + https://qudt.org/vocab/quantitykind/ExposureRate + https://www.wikidata.org/wiki/Q99720212 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-42 + 10-89 + Time derivative of exposure. - - - + + + - Resonance in a nuclear reaction, determined by the kinetic energy of an incident particle in the reference frame of the target particle. - ResonanceEnergy - ResonanceEnergy - https://qudt.org/vocab/quantitykind/ResonanceEnergy - https://www.wikidata.org/wiki/Q98165187 - 10-37.2 - Resonance in a nuclear reaction, determined by the kinetic energy of an incident particle in the reference frame of the target particle. + Dimensionless parameter to quantify fluid resistance. + DragCoefficient + DragFactor + DragCoefficient + https://qudt.org/vocab/quantitykind/DragCoefficient + https://www.wikidata.org/wiki/Q1778961 + 4-23.4 + Dimensionless parameter to quantify fluid resistance. - - - - - T0 L-2 M0 I+1 Θ0 N0 J0 - - - - - ElectricCurrentDensityUnit - ElectricCurrentDensityUnit + + + + + GreenDownQuark + GreenDownQuark - - - - A network of objects that implements a production process through a series of interconnected elements. - ProductionSystem - ProductionSystem - A network of objects that implements a production process through a series of interconnected elements. + + + + + + + + + + + + + + + + + + + + + DownQuark + DownQuark + https://en.wikipedia.org/wiki/Down_quark - - - - A system whose is mainly characterised by the way in which elements are interconnected. - Network - Network - A system whose is mainly characterised by the way in which elements are interconnected. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + GreenQuark + GreenQuark - - + + - Data filtering is the process of examining a dataset to exclude, rearrange, or apportion data according to certain criteria. - DataFiltering - DataFiltering - Data filtering is the process of examining a dataset to exclude, rearrange, or apportion data according to certain criteria. + Electrogravimetry using an electrochemical quartz crystal microbalance. + The change of mass is, for rigid deposits, linearly proportional to the change of the reso- nance frequency of the quartz crystal, according to the Sauerbrey equation. For non- rigid deposits, corrections must be made. + + ElectrochemicalPiezoelectricMicrogravimetry + ElectrochemicalPiezoelectricMicrogravimetry + Electrogravimetry using an electrochemical quartz crystal microbalance. + https://doi.org/10.1515/pac-2018-0109 - - - - - Differential quotient of q with respect to l, where q is the average total charge of all positive ions produced by an ionizing charged particle over a path l, divided by the elementary charge. - LinearIonization - LinearIonization - https://qudt.org/vocab/quantitykind/LinearIonization - https://www.wikidata.org/wiki/Q98690755 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-03-115 - 10-58 - Differential quotient of q with respect to l, where q is the average total charge of all positive ions produced by an ionizing charged particle over a path l, divided by the elementary charge. + + + + method of electroanalytical chemistry used to separate by electrolyse ions of a substance and to derive the amount of this substance from the increase in mass of an electrode. + + Electrogravimetry + Electrogravimetry + https://www.wikidata.org/wiki/Q902953 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-04-14 + method of electroanalytical chemistry used to separate by electrolyse ions of a substance and to derive the amount of this substance from the increase in mass of an electrode. + https://en.wikipedia.org/wiki/Electrogravimetry - - - - "The unit one is the neutral element of any system of units – necessary and present automatically." - --- SI Brochure - Represents the number 1, used as an explicit unit to say something has no units. - UnitOne - Unitless - UnitOne - http://qudt.org/vocab/unit/UNITLESS - Represents the number 1, used as an explicit unit to say something has no units. - "The unit one is the neutral element of any system of units – necessary and present automatically." - --- SI Brochure - Refractive index or volume fraction. - Typically used for ratios of two units whos dimensions cancels out. + + + + Analysis of the sample in order to determine information that are relevant for the characterisation method. + + SampleInspection + SampleInspection + Analysis of the sample in order to determine information that are relevant for the characterisation method. + In the Nanoindentation method the Scanning Electron Microscope to determine the indentation area. - - - - The subclass of measurement units with no physical dimension. - DimensionlessUnit - DimensionlessUnit - http://qudt.org/vocab/unit/UNITLESS - The subclass of measurement units with no physical dimension. - Refractive index -Plane angle -Number of apples + + + + Portion of material selected from a larger quantity of material. The term needs to be qualified, e.g., bulk sample, representative sample, primary sample, bulked sample, test sample, etc. The term 'sample' implies the existence of a sampling error, i.e., the results obtained on the portions taken are only estimates of the concentration of a constituent or the quantity of a property present in the parent material. If there is no or negligible sampling error, the portion removed is a test portion, aliquot, or specimen. + + Sample and Specime are often used interchangeably. However in some cases the term Specimen is used to specify a portion taken under conditions such that the sampling variability cannot be assessed (usually because the population is changing), and is assumed, for convenience, to be zero. + Sample + Specimen + Sample + Portion of material selected from a larger quantity of material. The term needs to be qualified, e.g., bulk sample, representative sample, primary sample, bulked sample, test sample, etc. The term 'sample' implies the existence of a sampling error, i.e., the results obtained on the portions taken are only estimates of the concentration of a constituent or the quantity of a property present in the parent material. If there is no or negligible sampling error, the portion removed is a test portion, aliquot, or specimen. + Sample and Specime are often used interchangeably. However in some cases the term Specimen is used to specify a portion taken under conditions such that the sampling variability cannot be assessed (usually because the population is changing), and is assumed, for convenience, to be zero. - + + - + - Electric charge per volume. - ElectricChargeDensity - VolumeElectricCharge - ElectricChargeDensity - https://qudt.org/vocab/quantitykind/ElectricChargeDensity - https://www.wikidata.org/wiki/Q69425629 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-07 - 6-3 - Electric charge per volume. - https://doi.org/10.1351/goldbook.C00988 + Measure for how the polarization of a material is affected by the application of an external electric field. + Permittivity + Permittivity + http://qudt.org/vocab/quantitykind/Permittivity + 6-14.1 + 6-14.2 + https://doi.org/10.1351/goldbook.P04507 - - + + + + + + - - T+3 L-3 M-1 I+2 Θ0 N0 J0 + + - - - - ElectricConductivityUnit - ElectricConductivityUnit - - - - - - DC polarography with current sampling at the end of each drop life mechanically enforced by a knocker at a preset drop time value. The current sampling and mechanical drop dislodge are synchronized. - In this way, the ratio of faradaic current to double layer charging current is enhanced and the negative influence of charging current is partially eliminated. Due to the improved signal (faradaic current) to noise (charging current) ratio, the limit of detection is lowered. - - SampledDCPolarography - TASTPolarography - SampledDCPolarography - DC polarography with current sampling at the end of each drop life mechanically enforced by a knocker at a preset drop time value. The current sampling and mechanical drop dislodge are synchronized. - https://doi.org/10.1515/pac-2018-0109 - - - - - - From Powder, from liquid, from gas - da una forma non propria ad una forma propria - FromNotProperShapeToWorkPiece - FromNotProperShapeToWorkPiece - From Powder, from liquid, from gas - Powder: -particles that are usually less than 1 mm in size + + + Differential quotient of the absorbed dose with respect to time. + AbsorbedDoseRate + AbsorbedDoseRate + https://qudt.org/vocab/quantitykind/AbsorbedDoseRate + https://www.wikidata.org/wiki/Q69428958 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-12-07 + 10-84 + Differential quotient of the absorbed dose with respect to time. - - - - A physics-based model based on a physics equation describing the behaviour of electrons. - ElectronicModel - ElectronicModel - A physics-based model based on a physics equation describing the behaviour of electrons. - Density functional theory. -Hartree-Fock. + + + + + + + + + + + + The subject of condensed matter physics that deals with the macroscopic and microscopic physical properties of matter, especially the solid and liquid phases which arise from electromagnetic forces between atoms. More generally, the subject deals with "condensed" phases of matter: systems of many constituents with strong interactions between them. + CondensedMatter + CondensedMatter + The subject of condensed matter physics that deals with the macroscopic and microscopic physical properties of matter, especially the solid and liquid phases which arise from electromagnetic forces between atoms. More generally, the subject deals with "condensed" phases of matter: systems of many constituents with strong interactions between them. - - - - A test to determine the resistance a material exhibits to permanent deformation by penetration of another harder material. - - HardnessTesting - HardnessTesting - A test to determine the resistance a material exhibits to permanent deformation by penetration of another harder material. + + + + + The DBpedia and UIPAC Gold Book definitions (http://dbpedia.org/page/Vacuum_permeability, https://doi.org/10.1351/goldbook.P04504) are outdated since May 20, 2019. It is now a measured constant. + The value of magnetic permeability in a classical vacuum. + VacuumMagneticPermeability + PermeabilityOfVacuum + VacuumMagneticPermeability + http://qudt.org/vocab/constant/ElectromagneticPermeabilityOfVacuum + 6-26.1 - - - - - Quotient of the product of the electric charge of a particle and the magnitude of the magnetic flux density of the magnetic field, and the particle mass. - CyclotronAngularFrequency - CyclotronAngularFrequency - https://qudt.org/vocab/quantitykind/CyclotronAngularFrequency - https://www.wikidata.org/wiki/Q97708211 - 10-16 - Quotient of the product of the electric charge of a particle and the magnitude of the magnetic flux density of the magnetic field, and the particle mass. + + + + ParallelWorkflow + ParallelWorkflow - - - - Rate of change of the phase angle. - AngularFrequency - AngularFrequency - https://qudt.org/vocab/quantitykind/AngularFrequency - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-07-03 - https://dbpedia.org/page/Angular_frequency - 3-18 - Rate of change of the phase angle. - https://en.wikipedia.org/wiki/Angular_frequency - https://doi.org/10.1351/goldbook.A00352 + + + + + + + + + + + + + + + + + + + + + A procedure that has at least two procedures (tasks) as proper parts. + Workflow + Workflow + A procedure that has at least two procedures (tasks) as proper parts. - - - + + + + + + + + + + + + + + + + + + - RedUpQuark - RedUpQuark + AntiElectronType + AntiElectronType - - - - - T0 L0 M0 I0 Θ0 N+1 J0 - - - - - AmountUnit - AmountUnit + + + + + + + + + + + + + + + AntiLepton + AntiLepton - - + + + + + - - T-3 L+2 M+1 I0 Θ0 N0 J0 + + - - + - PowerUnit - PowerUnit + Even though torque has the same physical dimension as energy, it is not of the same kind and can not be measured with energy units like joule or electron volt. + The effectiveness of a force to produce rotation about an axis, measured by the product of the force and the perpendicular distance from the line of action of the force to the axis. + Torque + Torque + http://qudt.org/vocab/quantitykind/Torque + 4-12.2 + The effectiveness of a force to produce rotation about an axis, measured by the product of the force and the perpendicular distance from the line of action of the force to the axis. + https://doi.org/10.1351/goldbook.T06400 - - - - Data processing activities performed on the secondary data to determine the characterisation property (e.g. classification, quantification), which can be performed manually or exploiting a model. - - DataAnalysis - DataAnalysis - Data processing activities performed on the secondary data to determine the characterisation property (e.g. classification, quantification), which can be performed manually or exploiting a model. + + + + (according to DIN 8200) Shot peening to generate residual compressive stresses in layers of the blasting material close to the surface in order to improve certain component properties, e.g. fatigue strength, corrosion resistance, wear resistance (from: DIN 8200:1982) + Peening + ShotPeening + Verfestigungsstrahlen + Peening + (according to DIN 8200) Shot peening to generate residual compressive stresses in layers of the blasting material close to the surface in order to improve certain component properties, e.g. fatigue strength, corrosion resistance, wear resistance (from: DIN 8200:1982) - - - - - - - - - - - 3-dimensional array who's spatial direct parts are matrices. - Array3D - 3DArray - Array3D - 3-dimensional array who's spatial direct parts are matrices. + + + + HardeningByForming + Verfestigen durch Umformen + HardeningByForming - - - - Array subclasses with a specific shape can be constructed with cardinality restrictions. - -See Shape4x3Matrix as an example. - Arrays are ordered mathematical objects who's elementary spatial parts are numbers. Their dimensionality is constructed with spatial direct parthood, where 1-dimensional arrays have spatial direct parts Number and n-dimensional array have spatial direct parts (n-1)-dimensional arrays. - Arrays are ordered objects, since they are a subclasses of Arrangement. - Array - Array - Arrays are ordered mathematical objects who's elementary spatial parts are numbers. Their dimensionality is constructed with spatial direct parthood, where 1-dimensional arrays have spatial direct parts Number and n-dimensional array have spatial direct parts (n-1)-dimensional arrays. - A Vector is a 1-dimensional Array with Number as spatial direct parts, -a Matrix is a 2-dimensional Array with Vector as spatial direct parts, -an Array3D is a 3-dimensional Array with Matrix as spatial direct parts, -and so forth... + + + + + + + + + + + + + + + + + + + + + UpQuark + UpQuark + https://en.wikipedia.org/wiki/Up_quark - + - - - + + + + + + + + - - + + + FirstGenerationFermion + FirstGenerationFermion + + + + - - + + T-2 L+1 M0 I0 Θ0 N0 J0 - - - A tessellation in which all tiles are connected through spatiotemporal relations hasNext or contacts. - SpatioTemporalTessellation - WellFormedTessellation - SpatioTemporalTessellation - A tessellation in which all tiles are connected through spatiotemporal relations hasNext or contacts. + + + + AccelerationUnit + AccelerationUnit - - - - FormingJoin - FormingJoin + + + + + + + + + + + + + + ArithmeticExpression + ArithmeticExpression + 2+2 - - - - - Differential quotient of N with respect to time, where N is the number of particles being emitted from an infinitesimally small volume element in the time interval of duration dt, and dt. - ParticleEmissionRate - ParticleEmissionRate - https://www.wikidata.org/wiki/Q98153151 - 10-36 - Differential quotient of N with respect to time, where N is the number of particles being emitted from an infinitesimally small volume element in the time interval of duration dt, and dt. + + + + An expression that has parts only integer constants, variables, and the algebraic operations (addition, subtraction, multiplication, division and exponentiation by an exponent that is a rational number) + AlgebricExpression + AlgebricExpression + 2x+3 - + + - - - - - ReciprocalDuration - InverseDuration - InverseTime - ReciprocalTime - ReciprocalDuration - https://qudt.org/vocab/quantitykind/InverseTime - https://www.wikidata.org/wiki/Q98690850 - - - - - - - - - - - - + - - A 'Sign' that stands for an 'Object' due to causal continguity. - Index - Signal - Index - A 'Sign' that stands for an 'Object' due to causal continguity. - Smoke stands for a combustion process (a fire). -My facial expression stands for my emotional status. + + Measure of how resistant to compressibility a substance is. + ModulusOfCompression + BulkModulus + ModulusOfCompression + https://qudt.org/vocab/quantitykind/BulkModulus + https://www.wikidata.org/wiki/Q900371 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-69 + 4-19.3 + Measure of how resistant to compressibility a substance is. - + - - - - - - - - - - - - - - - - + + T0 L+2 M0 I0 Θ0 N-1 J0 - - - Semiotic subclasse are defined using Peirce's semiotic theory. - -"Namely, a sign is something, A, which brings something, B, its interpretant sign determined or created by it, into the same sort of correspondence with something, C, its object, as that in which itself stands to C." (Peirce 1902, NEM 4, 20–21). + + + + AreaPerAmountUnit + AreaPerAmountUnit + -The triadic elements: -- 'sign': the sign A (e.g. a name) -- 'interpretant': the sign B as the effects of the sign A on the interpreter (e.g. the mental concept of what a name means) -- 'object': the object C (e.g. the entity to which the sign A and B refer to) + + + + The class of individuals that stand for photons elementary particles. + Photon + Photon + The class of individuals that stand for photons elementary particles. + https://en.wikipedia.org/wiki/Photon + -This class includes also the 'interpeter' i.e. the entity that connects the 'sign' to the 'object' - The class of individuals that stands for semiotic objects, i.e. objects that take part on a semiotic process. - SemioticEntity - SemioticEntity - The class of individuals that stands for semiotic objects, i.e. objects that take part on a semiotic process. + + + + + Service + IntangibleProduct + Service + https://www.iso.org/obp/ui/#iso:std:iso:9000:ed-4:v1:en:term:3.7.7 - + - - + + - - - Semiotics - Semiotics + + + The overall lifetime of an holistic that has been the output of an intentional process. + This concepts encompass the overall lifetime of a product. +Is temporaly fundamental, meaning that it can have other products as holistic spatial parts, but its holistic temporal parts are not products. In other words, the individual must encompass the whole lifetime from creation to disposal. +A product can be a tangible object (e.g. a manufactured object), a process (e.g. service). It can be the outcome of a natural or an artificially driven process. +It must have and initial stage of its life that is also an outcome of a intentional process. + Product + Output + Product + https://www.iso.org/obp/ui/#iso:std:iso:9000:ed-3:v1:en:term:3.4.2 + https://www.iso.org/obp/ui/#iso:std:iso:14040:ed-2:v1:en:term:3.9 + The overall lifetime of an holistic that has been the output of an intentional process. + This concepts encompass the overall lifetime of a product. +Is temporaly fundamental, meaning that it can have other products as holistic spatial parts, but its holistic temporal parts are not products. In other words, the individual must encompass the whole lifetime from creation to disposal. +A product can be a tangible object (e.g. a manufactured object), a process (e.g. service). It can be the outcome of a natural or an artificially driven process. +It must have and initial stage of its life that is also an outcome of a intentional process. - - - - A measuring instrument that can be used alone is a measuring system. - Device used for making measurements, alone or in conjunction with one or more supplementary devices. - --- VIM - MeasuringInstrument - MeasuringInstrument - Device used for making measurements, alone or in conjunction with one or more supplementary devices. + + + + + Measure of a conical geometric figure, called solid angle, formed by all rays, originating from a common point, called the vertex of the solid angle, and passing through the points of a closed, non-self-intersecting curve in space considered as the border of a surface. + SolidAngularMeasure + SolidAngle + SolidAngularMeasure + https://qudt.org/vocab/quantitykind/SolidAngle + https://www.wikidata.org/wiki/Q208476 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=102-04-46 + https://dbpedia.org/page/Solid_angle + 3-8 + Measure of a conical geometric figure, called solid angle, formed by all rays, originating from a common point, called the vertex of the solid angle, and passing through the points of a closed, non-self-intersecting curve in space considered as the border of a surface. + https://en.wikipedia.org/wiki/Solid_angle + --- VIM - measuring instrument + + + + A well-formed formula in computer science may be or not be interpreted by a computer. For example pseudo-code is only intended for human consumption. + A well-formed formula that follows the syntactic rules of computer science. + ComputerScience + ComputerScience + A well-formed formula that follows the syntactic rules of computer science. + A well-formed formula in computer science may be or not be interpreted by a computer. For example pseudo-code is only intended for human consumption. - - - - An observer that makes use of a measurement tool and provides a quantitative property. - Measurer - Measurer - An observer that makes use of a measurement tool and provides a quantitative property. + + + + A well-formed finite combination of mathematical symbols according to some specific rules. + Expression + Expression + A well-formed finite combination of mathematical symbols according to some specific rules. - - + + + + + + + + + + + - - - - - - + + - - An interpreter who establish the connection between an icon an an object recognizing their resemblance (e.g. logical, pictorial) - Cogniser - Cogniser - An interpreter who establish the connection between an icon an an object recognizing their resemblance (e.g. logical, pictorial) - The scientist that connects an equation to a physical phenomenon. - - - - - - A language object respecting the syntactic rules of C++. - CPlusPlus - C++ - CPlusPlus - A language object respecting the syntactic rules of C++. + + MathematicalConstruct + MathematicalConstruct - + - + - The ratio of the binding energy of a nucleus to the atomic mass number. - BindingFraction - BindingFraction - https://qudt.org/vocab/quantitykind/BindingFraction - https://www.wikidata.org/wiki/Q98058362 - 10-23.2 - The ratio of the binding energy of a nucleus to the atomic mass number. - - - - - - Unit for quantities of dimension one that are the fraction of two lengths. - LengthFractionUnit - LengthFractionUnit - Unit for quantities of dimension one that are the fraction of two lengths. - Unit for plane angle. + Sum of the slowing-down area from fission energy to thermal energy and the diffusion area for thermal neutrons. + MigrationArea + MigrationArea + https://qudt.org/vocab/quantitykind/MigrationArea + https://www.wikidata.org/wiki/Q98966325 + 10-72.3 + Sum of the slowing-down area from fission energy to thermal energy and the diffusion area for thermal neutrons. - - + + + + + + + + + + + + - Distance, where one point is located on an axis or within a closed non self-intersecting curve or surface. - RadialDistance - RadialDistance - https://qudt.org/vocab/quantitykind/RadialDistance - https://www.wikidata.org/wiki/Q1578234 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-01-26 - 3-1.9 - Distance, where one point is located on an axis or within a closed non self-intersecting curve or surface. + Extent of a surface. + Area + Area + http://qudt.org/vocab/quantitykind/Area + 3-3 + https://doi.org/10.1351/goldbook.A00429 - - + + + + + - - - - - - + + - - A coded that makes use of an atomic symbol with respect to the code used to refer to the interaction. - A property is atomic in the sense that is aimed to deliver one and one only aspect of the object according to one code, such as the color with one sign (e.g., black) or a quantitiative property (e.g., 1.4 kg). - Property - Property - A coded that makes use of an atomic symbol with respect to the code used to refer to the interaction. - Hardness is a subclass of properties. -Vickers hardness is a subclass of hardness that involves the procedures and instruments defined by the standard hardness test. - The name "red" which is atomic in the code made of the list of colors. - A property is atomic in the sense that is aimed to deliver one and one only aspect of the object according to one code, such as the color with one sign (e.g., black) or a quantitiative property (e.g., 1.4 kg). + + Number of particles per time and area crossing a surface. + ParticleCurrentDensity + ParticleCurrentDensity + https://qudt.org/vocab/quantitykind/ParticleCurrent + https://www.wikidata.org/wiki/Q2400689 + 10-48 + Number of particles per time and area crossing a surface. - - - - - RedDownAntiQuark - RedDownAntiQuark + + + + + T+1 L-3 M0 I0 Θ0 N0 J0 + + + + + TimePerVolumeUnit + TimePerVolumeUnit - + + + + An icon that focus on WHERE/WHEN the object is, in the sense of spatial or temporal shape. + An icon that mimics the spatial or temporal shape of the object. + The subclass of icon inspired by Peirceian category a) the image, which depends on a simple quality (e.g. picture). + ResemblanceIcon + ResemblanceIcon + An icon that mimics the spatial or temporal shape of the object. + A geographical map that imitates the shape of the landscape and its properties at a specific historical time. + An icon that focus on WHERE/WHEN the object is, in the sense of spatial or temporal shape. + + + - - + + + - + @@ -8690,263 +6787,338 @@ Vickers hardness is a subclass of hardness that involves the procedures and inst - + - - An interpreter who establish the connection between an conventional sign and an object according to a specific convention. - Declarer - Declarer - An interpreter who establish the connection between an conventional sign and an object according to a specific convention. - A scientist that assigns a quantity to a physical objects without actually measuring it but taking it for granted due to its previous experience (e.g. considering an electron charge as 1.6027663e-19 C, assigning a molecular mass to a gas only by the fact of a name on the bottle). - Someone who assigns a name to an object. + + A sign that stands for an object by resembling or imitating it, in shape, function or by sharing a similar logical structure. + If object and sign belongs to the same class, then the sign is fuctional, diagrammatic and resemblance. +For example, when a Boeing 747 is used as a sign for another Boeing 747. + In Peirce semiotics three subtypes of icon are possible: +(a) the image, which depends on a simple quality (e.g. picture) +(b) the diagram, whose internal relations, mainly dyadic or so taken, represent by analogy the relations in something (e.g. math formula, geometric flowchart) +(c) the metaphor, which represents the representative character of a sign by representing a parallelism in something else +[Wikipedia] + Icon + Model + Simulacrum + Icon + A sign that stands for an object by resembling or imitating it, in shape, function or by sharing a similar logical structure. + A picture that reproduces the aspect of a person. + An equation that reproduces the logical connection of the properties of a physical entity. - - - - - - - - - - - - + + + + + An object which is an holistic temporal part of another object. + Here we consider a temporal interval that is lower than the characteristic time of the physical process that provides the causality connection between the object parts. + SubObject + SubObject + An object which is an holistic temporal part of another object. + If an inhabited house is considered as an house that is occupied by some people in its majority of time, then an interval of inhabited house in which occasionally nobody is in there is no more an inhabited house, but an unhinabited house, since this temporal part does not satisfy the criteria of the whole. + + + + + + + Critical thermodynamic temperature of a superconductor. + SuperconductionTransitionTemperature + SuperconductionTransitionTemperature + https://qudt.org/vocab/quantitykind/SuperconductionTransitionTemperature + https://www.wikidata.org/wiki/Q106103037 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=815-10-09 + 12-35.3 + Critical thermodynamic temperature of a superconductor. + + + + + + Temperature below which quantum effects dominate. + CriticalTemperature + CriticalTemperature + https://www.wikidata.org/wiki/Q1450516 + Temperature below which quantum effects dominate. + + + + + + + Product of damping coefficient and period duration. + LogarithmicDecrement + LogarithmicDecrement + https://www.wikidata.org/wiki/Q1399446 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-05-25 + 3-25 + Product of damping coefficient and period duration. + + + + - + - - - + + + + - + + + + + + + + + + + + - - + + + + + A solvable set of one Physics Equation and one or more Materials Relations. + MaterialsModel + https://op.europa.eu/en/publication-detail/-/publication/ec1455c3-d7ca-11e6-ad7c-01aa75ed71a1 + MaterialsModel + A solvable set of one Physics Equation and one or more Materials Relations. + + + + + + + + + - - The entity (or agent, or observer, or cognitive entity) who connects 'Sign', 'Interpretant' and 'Object'. - The interpreter is not the ontologist, being the ontologist acting outside the ontology at the meta-ontology level. + + A mathematical entity based on a fundamental physics theory which defines the relations between physics quantities of an entity. + CEN Workshop Agreement – CWA 17284 “Materials modelling – terminology, classification and metadata” + PhysicsBasedModel + PhysicsBasedModel + A mathematical entity based on a fundamental physics theory which defines the relations between physics quantities of an entity. + -On the contrary, the interpreter is an agent recognized by the ontologist. The semiotic branch of the EMMO is the tool used by the ontologist to represent an interpreter's semiotic activity. - Interpreter - Interpreter - The entity (or agent, or observer, or cognitive entity) who connects 'Sign', 'Interpretant' and 'Object'. - For example, the ontologist may be interest in cataloguing in the EMMO how the same object (e.g. a cat) is addressed using different signs (e.g. cat, gatto, chat) by different interpreters (e.g. english, italian or french people). + + + + + Arctan of the loss factor + LossAngle + LossAngle + https://www.qudt.org/vocab/quantitykind/LossAngle + https://www.wikidata.org/wiki/Q20820438 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-49 + 6-55 + Arctan of the loss factor + + + + + + Rest mass of a nuclide X in the ground state. + NuclidicMass + NuclidicMass + https://www.wikidata.org/wiki/Q97010809 + 10-4.2 + Rest mass of a nuclide X in the ground state. + https://doi.org/10.1351/goldbook.N04258 + + + + + + + For particle X, mass of that particle at rest in an inertial frame. + RestMass + InvariantMass + ProperMass + RestMass + https://qudt.org/vocab/quantitykind/RestMass + https://www.wikidata.org/wiki/Q96941619 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-03 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-04-16 + https://dbpedia.org/page/Mass_in_special_relativity + 10-2 + For particle X, mass of that particle at rest in an inertial frame. + https://en.wikipedia.org/wiki/Invariant_mass + + + + + + Differential scanning calorimetry (DSC) is a thermoanalytical technique in which the difference in the amount of heat required to increase the temperature of a sample and reference is measured as a function of temperature. Both the sample and reference are maintained at nearly the same temperature throughout the experiment. Generally, the temperature program for a DSC analysis is designed such that the sample holder temperature increases linearly as a function of time. The reference sample should have a well-defined heat capacity over the range of temperatures to be scanned. Additionally, the reference sample must be stable, of high purity, and must not experience much change across the temperature scan. Typically, reference standards have been metals such as indium, tin, bismuth, and lead, but other standards such as polyethylene and fatty acids have been proposed to study polymers and organic compounds, respectively. + DifferentialScanningCalorimetry + DSC + DifferentialScanningCalorimetry + Differential scanning calorimetry (DSC) is a thermoanalytical technique in which the difference in the amount of heat required to increase the temperature of a sample and reference is measured as a function of temperature. Both the sample and reference are maintained at nearly the same temperature throughout the experiment. Generally, the temperature program for a DSC analysis is designed such that the sample holder temperature increases linearly as a function of time. The reference sample should have a well-defined heat capacity over the range of temperatures to be scanned. Additionally, the reference sample must be stable, of high purity, and must not experience much change across the temperature scan. Typically, reference standards have been metals such as indium, tin, bismuth, and lead, but other standards such as polyethylene and fatty acids have been proposed to study polymers and organic compounds, respectively. + -The same applies for the results of measurements: the ontologist may be interest to represent in the EMMO how different measurement processes (i.e. semiosis) lead to different quantitative results (i.e. signs) according to different measurement devices (i.e. interpreters). + + + + Thermomechanical analysis (TMA) is a technique used in thermal analysis, a branch of materials science which studies the properties of materials as they change with temperature. + + ThermochemicalTesting + TMA + ThermochemicalTesting + Thermomechanical analysis (TMA) is a technique used in thermal analysis, a branch of materials science which studies the properties of materials as they change with temperature. - + - + - + - Coercive field strength in a substance when either the magnetic flux density or the magnetic polarization and magnetization is brought from its value at magnetic saturation to zero by monotonic reduction of the applied magnetic field strength. - Coercivity - Coercivity - https://qudt.org/vocab/quantitykind/Coercivity - https://www.wikidata.org/wiki/Q432635 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-12-69 - 6-31 - Coercive field strength in a substance when either the magnetic flux density or the magnetic polarization and magnetization is brought from its value at magnetic saturation to zero by monotonic reduction of the applied magnetic field strength. - - - - - - - A type of sol in the form of one solid dispersed in another continuous solid. - SolidSol - SolidSol - A type of sol in the form of one solid dispersed in another continuous solid. - - - - - - - - - - - - - - - SolidMixture - SolidMixture - - - - - - A Miixture is a material made up of two or more different substances which are physically (not chemically) combined. - Mixture - Mixture - A Miixture is a material made up of two or more different substances which are physically (not chemically) combined. + quotient of the number of vibrational modes in an infinitesimal interval of angular frequency, and the product of the width of that interval and volume + DensityOfVibrationalStates + DensityOfVibrationalStates + https://qudt.org/vocab/quantitykind/DensityOfStates + https://www.wikidata.org/wiki/Q105637294 + 12-12 + quotient of the number of vibrational modes in an infinitesimal interval of angular frequency, and the product of the width of that interval and volume - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - A particle with half odd integer spin (1/2, 3/2, etc...) that follows Fermi-Dirac statistics. - FundamentalFermion - FundamentalFermion - A particle with half odd integer spin (1/2, 3/2, etc...) that follows Fermi-Dirac statistics. - https://en.wikipedia.org/wiki/Fermion + + + + measurement principle in which the complex electric impedance of a system is measured, usually as a function of a small amplitude sinusoidal electrode potential + + Impedimetry + Impedimetry + measurement principle in which the complex electric impedance of a system is measured, usually as a function of a small amplitude sinusoidal electrode potential + https://doi.org/10.1515/pac-2018-0109 - - - - A semiotic object that is recognised by an interpreter (a cogniser) when establishing a connection between the object and an icon. - Cognised - Cognised - A semiotic object that is recognised by an interpreter (a cogniser) when establishing a connection between the object and an icon. - A physical phenomenon that is connected to an equation by a scientist. + + + + + + + + + + + + + Differential quotient of N with respect to a, where N is the number of particles incident on a sphere of cross-sectional area a. + ParticleFluence + ParticleFluence + https://qudt.org/vocab/quantitykind/ParticleFluence + https://www.wikidata.org/wiki/Q82965908 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-15 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-04-18 + 10-43 + Differential quotient of N with respect to a, where N is the number of particles incident on a sphere of cross-sectional area a. - + - - - - - - - - - - - - - - - - + + T+2 L0 M-1 I+1 Θ0 N0 J0 - - - A sign that stands for an object by resembling or imitating it, in shape, function or by sharing a similar logical structure. - If object and sign belongs to the same class, then the sign is fuctional, diagrammatic and resemblance. -For example, when a Boeing 747 is used as a sign for another Boeing 747. - In Peirce semiotics three subtypes of icon are possible: -(a) the image, which depends on a simple quality (e.g. picture) -(b) the diagram, whose internal relations, mainly dyadic or so taken, represent by analogy the relations in something (e.g. math formula, geometric flowchart) -(c) the metaphor, which represents the representative character of a sign by representing a parallelism in something else -[Wikipedia] - Icon - Model - Simulacrum - Icon - A sign that stands for an object by resembling or imitating it, in shape, function or by sharing a similar logical structure. - A picture that reproduces the aspect of a person. - An equation that reproduces the logical connection of the properties of a physical entity. + + + + ElectricMobilityUnit + ElectricMobilityUnit - - - - An uncharged vector boson that mediate the weak interaction. - Z bosons are their own antiparticles. - ZBoson - NeutralWeakBoson - ZBoson - An uncharged vector boson that mediate the weak interaction. - Z bosons are their own antiparticles. - https://en.wikipedia.org/wiki/W_and_Z_bosons + + + + + + ActivityFactor + ActivityFactor + https://www.wikidata.org/wiki/Q89335167 + 9-22 - - - - - - - - - - - - - - - WeakBoson - WeakBoson + + + + + ActivityCoefficient + ActivityCoefficient + https://qudt.org/vocab/quantitykind/ActivityCoefficient + https://www.wikidata.org/wiki/Q745224 + 9-25 + https://doi.org/10.1351/goldbook.A00116 - - - - BlowMolding - BlowMolding + + + + Most instruments show plots of the current at the end of the forward-going pulse and of the backward-going pulse vs. the potential, as well as their difference. This can give valuable information on the kinetics of the electrode reaction and the electrode process. + The current is sampled just before the end of the forward- going pulse and of the backward-going pulse and the difference of the two sampled currents is plotted versus the applied potential of the potential or staircase ramp. The square-wave voltammogram is peak-shaped + The sensitivity of SWV depends on the reversibility of the electrode reaction of the analyte. + voltammetry in which a square-wave potential waveform is superimposed on an underlying linearly varying potential ramp or staircase ramp + + SquareWaveVoltammetry + OSWV + OsteryoungSquareWaveVoltammetry + SWV + SquareWaveVoltammetry + https://www.wikidata.org/wiki/Q4016323 + voltammetry in which a square-wave potential waveform is superimposed on an underlying linearly varying potential ramp or staircase ramp + https://en.wikipedia.org/wiki/Squarewave_voltammetry + https://doi.org/10.1515/pac-2018-0109 - - - - FormingFromPlastic - FormingFromPlastic + + + + Any constitutionally or isotopically distinct atom, molecule, ion, ion pair, radical, radical ion, complex, conformer etc., identifiable as a separately distinguishable entity that can undergo a chemical reaction. + Molecular entity is used as a general term for singular entities, irrespective of their nature, while chemical species stands for sets or ensembles of molecular entities. +Note that the name of a compound may refer to the respective molecular entity or to the chemical species, + https://goldbook.iupac.org/terms/view/M03986 + MolecularEntity + ChemicalEntity + MolecularEntity + Any constitutionally or isotopically distinct atom, molecule, ion, ion pair, radical, radical ion, complex, conformer etc., identifiable as a separately distinguishable entity that can undergo a chemical reaction. + Hydrogen molecule is an adequate definition of a certain molecular entity for some purposes, whereas for others it is necessary to distinguish the electronic state and/or vibrational state and/or nuclear spin, etc. of the hydrogen molecule. + Methane, may mean a single molecule of CH4 (molecular entity) or a molar amount, specified or not (chemical species), participating in a reaction. The degree of precision necessary to describe a molecular entity depends on the context. + Molecular entity is used as a general term for singular entities, irrespective of their nature, while chemical species stands for sets or ensembles of molecular entities. +Note that the name of a compound may refer to the respective molecular entity or to the chemical species, + This concept is strictly related to chemistry. For this reason an atom can be considered the smallest entity that can be considered "molecular", including nucleus when they are seen as ions (e.g. H⁺, He⁺⁺). - - - - GluonType6 - GluonType6 + + + + + + + + + + + + + ParticulateMatter + ParticulateMatter @@ -8962,86 +7134,167 @@ For example, when a Boeing 747 is used as a sign for another Boeing 747.Proportionality constant between the particle current density J and the gradient of the particle fluence rate. - - - - "Ordinal quantities, such as Rockwell C hardness, are usually not considered to be part of a system of quantities because they are related to other quantities through empirical relations only." -International vocabulary of metrology (VIM) - "Quantity, defined by a conventional measurement procedure, for which a total ordering relation can be established, according to magnitude, with other quantities of the same kind, but for which no algebraic operations among those quantities exist" -International vocabulary of metrology (VIM) - OrdinalQuantity - OrdinalQuantity - "Quantity, defined by a conventional measurement procedure, for which a total ordering relation can be established, according to magnitude, with other quantities of the same kind, but for which no algebraic operations among those quantities exist" -International vocabulary of metrology (VIM) - Hardness -Resilience - ordinal quantity + + + + + + + + + + + + + Quotient of average drift speed imparted to a charged particle in a medium by an electric field, and the electric field strength. + Mobility + Mobility + https://qudt.org/vocab/quantitykind/Mobility + https://www.wikidata.org/wiki/Q900648 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-06-36 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-02-77 + 10-61 + Quotient of average drift speed imparted to a charged particle in a medium by an electric field, and the electric field strength. + https://doi.org/10.1351/goldbook.M03955 - - - - - - - - - - + + + + For measurements using ion-selective electrodes, the measurement is made under equi- librium conditions what means that the macroscopic electric current is zero and the con- centrations of all species are uniform throughout the solution. The indicator electrode is in direct contact with the analyte solution, whereas the reference electrode is usually separated from the analyte solution by a salt bridge. The potential difference between the indicator and reference electrodes is normally directly proportional to the logarithm of the activity (concentration) of the analyte in the solution (Nernst equation). See also ion selec- tive electrode. + Method of electroanalytical chemistry based on measurement of an electrode potential. + Potentiometric methods are used to measure the electrochemical potentials of a metallic structure in a given environment. + + Potentiometry + Potentiometry + https://www.wikidata.org/wiki/Q900632 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-04-12 + Potentiometric methods are used to measure the electrochemical potentials of a metallic structure in a given environment. + https://doi.org/10.1515/pac-2018-0109 + + + + + + A manufacturing with an output that is an object with a specific function, shape, or intended use, not simply a material. + WorkpieceManufacturing + DIN 8580:2020 + ISO 15531-1:2004 +discrete manufacturing: production of discrete items. + ISO 8887-1:2017 +manufacturing: production of components + DiscreteManufacturing + Werkstücke + WorkpieceManufacturing + A manufacturing with an output that is an object with a specific function, shape, or intended use, not simply a material. + + + + + + - - - 1 + + - - - - - - - - - - - - - A quantifiable property of a phenomenon, body, or substance. - VIM defines a quantity as a "property of a phenomenon, body, or substance, where the property has a magnitude that can be expressed as a number and a reference". + + For the dissociation of a salt AmBn → mA + nB, the solubility product is KSP = am(A) ⋅ an(B), where a is ionic activity and m and n are the stoichiometric numbers. + product of the ion activities of the ions resulting from the dissociation of a solute in a saturated solution, raised to powers equal to their stoichiometric numbers. + SolubilityProduct + SolubilityProductConstant + SolubilityProduct + https://www.wikidata.org/wiki/Q11229788 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-01-23 + product of the ion activities of the ions resulting from the dissociation of a solute in a saturated solution, raised to powers equal to their stoichiometric numbers. + https://doi.org/10.1351/goldbook.S05742 + -A quantity in EMMO is a property and therefore only addresses the first part of the VIM definition (that is a property of a phenomenon, body, or substance). The second part (that it can be expressed as a number and a reference) is syntactic and addressed by emmo:QuantityValue. - Quantity - Measurand - Quantity - https://qudt.org/schema/qudt/Quantity - A quantifiable property of a phenomenon, body, or substance. - length -Rockwell C hardness -electric resistance - measurand - quantity - VIM defines a quantity as a "property of a phenomenon, body, or substance, where the property has a magnitude that can be expressed as a number and a reference". + + + + Length of a rectifiable curve between two of its points. + PathLength + ArcLength + PathLength + https://www.wikidata.org/wiki/Q7144654 + https://dbpedia.org/page/Arc_length + 3-1.7 + Length of a rectifiable curve between two of its points. + https://en.wikipedia.org/wiki/Arc_length + -A quantity in EMMO is a property and therefore only addresses the first part of the VIM definition (that is a property of a phenomenon, body, or substance). The second part (that it can be expressed as a number and a reference) is syntactic and addressed by emmo:QuantityValue. + + + + + T0 L+3 M0 I0 Θ0 N0 J0 + + + + + VolumeUnit + VolumeUnit - - - - A logarithmic unit is a unit that can be used to express a quantity (physical or mathematical) on a logarithmic scale, that is, as being proportional to the value of a logarithm function applied to the ratio of the quantity and a reference quantity of the same type. - Note that logarithmic units like decibel or neper are not univocally defines, since their definition depends on whether they are used to measure a "power" or a "root-power" quantity. + + + + + + + + + + + + + Ratio of shear stress to the shear strain. + ModulusOfRigidity + ShearModulus + ModulusOfRigidity + https://qudt.org/vocab/quantitykind/ShearModulus + https://www.wikidata.org/wiki/Q461466 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-68 + 4-19.2 + Ratio of shear stress to the shear strain. + https://doi.org/10.1351/goldbook.S05635 + -It is advisory to create a uniquely defined subclass these units for concrete usage. - LogarithmicUnit - LogarithmicUnit - http://qudt.org/schema/qudt/LogarithmicUnit - A logarithmic unit is a unit that can be used to express a quantity (physical or mathematical) on a logarithmic scale, that is, as being proportional to the value of a logarithm function applied to the ratio of the quantity and a reference quantity of the same type. - Decibel - Note that logarithmic units like decibel or neper are not univocally defines, since their definition depends on whether they are used to measure a "power" or a "root-power" quantity. + + + + Near edge X-ray absorption fine structure (NEXAFS), also known as X-ray absorption near edge structure (XANES), is a type of absorption spectroscopy that indicates the features in the X-ray absorption spectra (XAS) of condensed matter due to the photoabsorption cross section for electronic transitions from an atomic core level to final states in the energy region of 50–100 eV above the selected atomic core level ionization energy, where the wavelength of the photoelectron is larger than the interatomic distance between the absorbing atom and its first neighbour atoms. + + Nexafs + Nexafs + Near edge X-ray absorption fine structure (NEXAFS), also known as X-ray absorption near edge structure (XANES), is a type of absorption spectroscopy that indicates the features in the X-ray absorption spectra (XAS) of condensed matter due to the photoabsorption cross section for electronic transitions from an atomic core level to final states in the energy region of 50–100 eV above the selected atomic core level ionization energy, where the wavelength of the photoelectron is larger than the interatomic distance between the absorbing atom and its first neighbour atoms. + + + + + + + Sum of the maximum beta-particle kinetic energy and the recoil energy of the atom produced in a reference frame in which the emitting nucleus is at rest before its disintegration. + BetaDisintegrationEnergy + BetaDisintegrationEnergy + https://www.wikidata.org/wiki/Q98148340 + 10-34 + Sum of the maximum beta-particle kinetic energy and the recoil energy of the atom produced in a reference frame in which the emitting nucleus is at rest before its disintegration. + -It is advisory to create a uniquely defined subclass these units for concrete usage. - https://en.wikipedia.org/wiki/Logarithmic_scale#Logarithmic_units + + + + An uncharged vector boson that mediate the weak interaction. + Z bosons are their own antiparticles. + ZBoson + NeutralWeakBoson + ZBoson + An uncharged vector boson that mediate the weak interaction. + Z bosons are their own antiparticles. + https://en.wikipedia.org/wiki/W_and_Z_bosons @@ -9070,834 +7323,1173 @@ It is advisory to create a uniquely defined subclass these units for concrete us https://doi.org/10.1351/goldbook.H02753 - - - - - + + + + + + + + + + + + + A mathematical model can be defined as a description of a system using mathematical concepts and language to facilitate proper explanation of a system or to study the effects of different components and to make predictions on patterns of behaviour. + +Abramowitz and Stegun, 1968 + An analogical icon expressed in mathematical language. + MathematicalModel + MathematicalModel + An analogical icon expressed in mathematical language. + + + + + + A variable whose value is assumed to be known independently from the equation, but whose value is not explicitated in the equation. + Parameter + Parameter + Viscosity in the Navier-Stokes equation + + + + + + A variable standing for a numerical defined mathematical object like e.g. a number, a vector of numbers, a matrix of numbers. + NumericalVariable + NumericalVariable + A variable standing for a numerical defined mathematical object like e.g. a number, a vector of numbers, a matrix of numbers. + + + + - - + + + + + + + + A formal computer-interpretable identifier of a system resource. + ResourceIdentifier + ResourceIdentifier + A formal computer-interpretable identifier of a system resource. + + + + + + + The class of individuals that stand for tau elementary particles belonging to the third generation of leptons. + Tau + Tau + The class of individuals that stand for tau elementary particles belonging to the third generation of leptons. + https://en.wikipedia.org/wiki/Tau_(particle) + + + + + + Application of a post-processing model to signals through a software, in order to calculate the final characterisation property. + + MeasurementDataPostProcessing + MeasurementDataPostProcessing + Application of a post-processing model to signals through a software, in order to calculate the final characterisation property. + Analysis of SEM (or optical) images to gain additional information (image filtering/integration/averaging, microstructural analysis, grain size evaluation, Digital Image Correlation procedures, etc.) + In nanoindentation testing, this is the Oliver-Pharr method, which allows calculating the elastic modulus and hardness of the sample by using the load and depth measured signals. + + + + + + Evaluation of quality indicators to determine how well suited a data set is to be used for the characterisation of a material. + DataQuality + DataQuality + Evaluation of quality indicators to determine how well suited a data set is to be used for the characterisation of a material. + Example evaluation of S/N ratio, or other quality indicators (limits of detection/quantification, statistical analysis of data, data robustness analysis) + + + + + + Data that are non-quantitatively interpreted (e.g., qualitative data, types). + NonNumericalData + NonNumericalData + Data that are non-quantitatively interpreted (e.g., qualitative data, types). + + + + + + Nailing is joining by hammering or pressing nails (wire pins) as auxiliary parts into the solid material. Several parts are joined by pressing them together (from: DIN 8593 part 3/09.85). + Nailing + Nageln + Nailing + + + + + + A collective term for the processes in which, during joining, the parts to be joined and any auxiliary parts are essentially only elastically deformed and unintentional loosening is prevented by frictional connection. + Pressing + Anpressen + Pressing + + + + - Ratio of shear stress to the shear strain. - ModulusOfRigidity - ShearModulus - ModulusOfRigidity - https://qudt.org/vocab/quantitykind/ShearModulus - https://www.wikidata.org/wiki/Q461466 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-68 - 4-19.2 - Ratio of shear stress to the shear strain. - https://doi.org/10.1351/goldbook.S05635 + Length in a given direction regarded as horizontal. + The terms breadth and width are often used by convention, as distinguished from length and from height or thickness. + Width + Breadth + Width + https://qudt.org/vocab/quantitykind/Width + https://www.wikidata.org/wiki/Q35059 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-01-20 + 3-1.2 + Length in a given direction regarded as horizontal. - - + + + + - - T-2 L0 M0 I0 Θ0 N0 J0 + + + + + Subatomic particle which contains an odd number of valence quarks, at least 3. + Baryon + Baryon + Subatomic particle which contains an odd number of valence quarks, at least 3. + https://en.wikipedia.org/wiki/Baryon + + + + + + + + + + - - - AngularFrequencyUnit - AngularFrequencyUnit + + + Particles composed of two or more quarks. + Hadron + Hadron + Particles composed of two or more quarks. + https://en.wikipedia.org/wiki/Hadron - + - + - - + + + + + + Scalar measure of the rotational inertia with respect to a fixed axis of rotation. + MomentOfIntertia + MomentOfIntertia + https://qudt.org/vocab/quantitykind/MomentOfInertia + https://www.wikidata.org/wiki/Q165618 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-21 + 4-7 + Scalar measure of the rotational inertia with respect to a fixed axis of rotation. + https://doi.org/10.1351/goldbook.M04006 + + + + + + + RedUpAntiQuark + RedUpAntiQuark + + + + + + + + + + + + + + + + + + + + + + + UpAntiQuark + UpAntiQuark + + + + + + + + + + + + + + + + + + + + - - Conductivity per molar concentration of electrolyte. - MolarConductivity - MolarConductivity - https://qudt.org/vocab/quantitykind/MolarConductivity - https://www.wikidata.org/wiki/Q1943278 - 9-45 - Conductivity per molar concentration of electrolyte. - https://doi.org/10.1351/goldbook.M03976 + + An interpreter who establish the connection between an conventional sign and an object according to a specific convention. + Declarer + Declarer + An interpreter who establish the connection between an conventional sign and an object according to a specific convention. + A scientist that assigns a quantity to a physical objects without actually measuring it but taking it for granted due to its previous experience (e.g. considering an electron charge as 1.6027663e-19 C, assigning a molecular mass to a gas only by the fact of a name on the bottle). + Someone who assigns a name to an object. - - - - Encoded data made of more than one datum. - DataSet - DataSet - Encoded data made of more than one datum. + + + + Post-processing of the output of the calibration in order to get the actual calibration data to be used as input for the measurement. + CalibrationDataPostProcessing + CalibrationDataPostProcessing + Post-processing of the output of the calibration in order to get the actual calibration data to be used as input for the measurement. - - - - A self-consistent encoded data entity. - Datum - Datum - A self-consistent encoded data entity. - A character, a bit, a song in a CD. + + + + Analysis, that allows one to calculate the final material property from the calibrated primary data. + DataPostProcessing + DataPostProcessing + Analysis, that allows one to calculate the final material property from the calibrated primary data. - + + + + Unit for quantities of dimension one that are the fraction of two speeds. + SpeedFractionUnit + SpeedFractionUnit + Unit for quantities of dimension one that are the fraction of two speeds. + Unit for refractive index. + + + + + + Quantities that are ratios of quantities of the same kind (for example length ratios and amount fractions) have the option of being expressed with units (m/m, mol/mol to aid the understanding of the quantity being expressed and also allow the use of SI prefixes, if this +is desirable (μm/m, nmol/mol). +-- SI Brochure + Unit for fractions of quantities of the same kind, to aid the understanding of the quantity being expressed. + FractionUnit + RatioUnit + FractionUnit + Unit for fractions of quantities of the same kind, to aid the understanding of the quantity being expressed. + + + + + + An icon that focus on HOW the object works. + An icon that represents the internal logical structure of the object. + AnalogicalIcon + AnalogicalIcon + An icon that represents the internal logical structure of the object. + A physics equation is replicating the mechanisms internal to the object. + Electrical diagram is diagrammatic and resemblance + MODA and CHADA are diagrammatic representation of a simulation or a characterisation workflow. + An icon that focus on HOW the object works. + The subclass of icon inspired by Peirceian category (b) the diagram, whose internal relations, mainly dyadic or so taken, represent by analogy (with the same logic) the relations in something (e.g. math formula, geometric flowchart). + + + - - - - - - + + + T+2 L0 M+1 I0 Θ0 N0 J0 + - - - The overall lifetime of an holistic that has been the output of an intentional process. - This concepts encompass the overall lifetime of a product. -Is temporaly fundamental, meaning that it can have other products as holistic spatial parts, but its holistic temporal parts are not products. In other words, the individual must encompass the whole lifetime from creation to disposal. -A product can be a tangible object (e.g. a manufactured object), a process (e.g. service). It can be the outcome of a natural or an artificially driven process. -It must have and initial stage of its life that is also an outcome of a intentional process. - Product - Output - Product - https://www.iso.org/obp/ui/#iso:std:iso:9000:ed-3:v1:en:term:3.4.2 - https://www.iso.org/obp/ui/#iso:std:iso:14040:ed-2:v1:en:term:3.9 - The overall lifetime of an holistic that has been the output of an intentional process. - This concepts encompass the overall lifetime of a product. -Is temporaly fundamental, meaning that it can have other products as holistic spatial parts, but its holistic temporal parts are not products. In other words, the individual must encompass the whole lifetime from creation to disposal. -A product can be a tangible object (e.g. a manufactured object), a process (e.g. service). It can be the outcome of a natural or an artificially driven process. -It must have and initial stage of its life that is also an outcome of a intentional process. + + + MassSquareTimeUnit + MassSquareTimeUnit - - - - The class of individuals that satisfy a whole defining criteria (i.e. belongs to a subclass of whole) and have no temporal parts that satisfy that same criteria (no parts that are of the same type of the whole). - TemporallyFundamental - TemporallyFundamental - The class of individuals that satisfy a whole defining criteria (i.e. belongs to a subclass of whole) and have no temporal parts that satisfy that same criteria (no parts that are of the same type of the whole). + + + + + + A continuum characterized by structural rigidity and resistance to changes of shape or volume, that retains its shape and density when not confined. + Solid + Solid + A continuum characterized by structural rigidity and resistance to changes of shape or volume, that retains its shape and density when not confined. - - - - - AntiMuon - AntiMuon - + + + + A continuum is made of a sufficient number of parts that it continues to exists as continuum individual even after the loss of one of them i.e. a continuum is a redundant. + A state that is a collection of sufficiently large number of other parts such that: +- it is the bearer of qualities that can exists only by the fact that it is a sum of parts +- the smallest partition dV of the state volume in which we are interested in, contains enough parts to be statistically consistent: n [#/m3] x dV [m3] >> 1 + ContinuumSubstance + ContinuumSubstance + A state that is a collection of sufficiently large number of other parts such that: +- it is the bearer of qualities that can exists only by the fact that it is a sum of parts +- the smallest partition dV of the state volume in which we are interested in, contains enough parts to be statistically consistent: n [#/m3] x dV [m3] >> 1 + A continuum is made of a sufficient number of parts that it continues to exists as continuum individual even after the loss of one of them i.e. a continuum is a redundant. + A continuum is not necessarily small (i.e. composed by the minimum amount of sates to fulfill the definition). - - - - A command must be interpretable by the computer system. - An instruction to a computer system to perform a given task. - Command - Command - From a bash shell would e.g. `ls` be a command. Another example of a shell command would be `/path/to/executable arg1 arg2`. - A command must be interpretable by the computer system. - Commands are typically performed from a shell or a shell script, but not limited to them. +A single continuum individual can be the whole fluid in a pipe. + A continuum is the bearer of properties that are generated by the interactions of parts such as viscosity and thermal or electrical conductivity. - - - - - - - - - - - - - - - - - - - - - - Deals with entities that have a defined shape. - The process of transforming precursor objects (e.g. raw materials) into a product by the use of manual labor, machinery or chemical/biological processes. - Manufacturing - DIN 8580:2020 - ISO 15531-1:2004 -manufacturing: function or act of converting or transforming material from raw material or semi-finished state to a state of further completion - ISO 18435-1:2009 -manufacturing process: set of processes in manufacturing involving a flow and/or transformation of material, information, energy, control, or any other element in a manufacturing area - Manufacturing - The process of transforming precursor objects (e.g. raw materials) into a product by the use of manual labor, machinery or chemical/biological processes. - Deals with entities that have a defined shape. - https://de.wikipedia.org/wiki/Fertigungsverfahren + + + + + + + + + + + + + + + + + + + + + + + + + A superclass made as the disjoint union of all the form under which matter can exist. + In physics, a state of matter is one of the distinct forms in which matter can exist. Four states of matter are observable in everyday life: solid, liquid, gas, and plasma. + StateOfMatter + StateOfMatter + A superclass made as the disjoint union of all the form under which matter can exist. + In physics, a state of matter is one of the distinct forms in which matter can exist. Four states of matter are observable in everyday life: solid, liquid, gas, and plasma. + https://en.wikipedia.org/wiki/State_of_matter - - - - - An object that has been designed and manufactured for a particular purpose. - ManufacturedProduct - Artifact - Engineered - TangibleProduct - ManufacturedProduct - An object that has been designed and manufactured for a particular purpose. - Car, tire, composite material. + + + + + Work function is the energy difference between an electron at rest at infinity and an electron at the Fermi level in the interior of a substance. + least energy required for the emission of a conduction electron. + WorkFunction + ElectronWorkFunction + WorkFunction + https://www.wikidata.org/wiki/Q783800 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-06-35 + 12-24.1 + least energy required for the emission of a conduction electron. + https://doi.org/10.1351/goldbook.E02015 - - - - A WorkPiece is physical artifact, that has a proper shape and occupyes a proper volume intended for subsequent transformation. It is a condensed state, so it is a compact body that is processed or has to be processed. - A solid is defined as a portion of matter that is in a condensed state characterised by resistance to deformation and volume changes. - In manufacturing, a workpiece is a single, delimited part of largely solid material that is processed in some form (e.g. stone ). - In physics, a rigid body (also known as a rigid object[2]) is a solid body in which deformation is zero or so small it can be neglected. The distance between any two given points on a rigid body remains constant in time regardless of external forces or moments exerted on it. A rigid body is usually considered as a continuous distribution of mass. - It has a shape, so we conclude that it is solid - Object that is processed with a machine - Seems to have to be processed through mechanical deformation. So it takes part of a manufacturing process. It is a Manufactured Product and it can be a Commercial Product - The raw material or partially finished piece that is shaped by performing various operations. - They are not powders or threads - a physical artifact, real or virtual, intended for subsequent transformation within some manufacturing operation - fili e polveri non sono compresi - it seems to be an intermediate product, that has to reach the final shape. - it seems to be solid, so it has a proper shape - powder is not workpiece because it has the shape of the recipient containing them - WorkPiece - Werkstück - WorkPiece - A WorkPiece is physical artifact, that has a proper shape and occupyes a proper volume intended for subsequent transformation. It is a condensed state, so it is a compact body that is processed or has to be processed. + + + + + GreenTopAntiQuark + GreenTopAntiQuark - - - - - - - - - - - - - A material that is obtained through a manufacturing process. - ManufacturedMaterial - EngineeredMaterial - ProcessedMaterial - ManufacturedMaterial - A material that is obtained through a manufacturing process. + + + + + + + + + + + + + + + + + + + + + TopAntiQuark + TopAntiQuark - - - - - An initial step of a workflow. - There may be more than one begin task, if they run in parallel. - BeginStep - BeginStep - An initial step of a workflow. - There may be more than one begin task, if they run in parallel. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + GreenAntiQuark + GreenAntiQuark - + + + + Inverse of the time constant of an exponentially varying quantity. + DampingCoefficient + DampingCoefficient + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-05-24 + 3-24 + Inverse of the time constant of an exponentially varying quantity. + + + - - - + + + - - - - A step is part of a specific granularity level for the workflow description, as composition of tasks. - A task that is a well formed tile of a workflow, according to a reductionistic description. - Step - Step - A task that is a well formed tile of a workflow, according to a reductionistic description. - A step is part of a specific granularity level for the workflow description, as composition of tasks. + + + Here is assumed that the concept of 'object' is always relative to a 'semiotic' process. An 'object' does not exists per se, but it's always part of an interpretation. + +The EMMO relies on strong reductionism, i.e. everything real is a formless collection of elementary particles: we give a meaning to real world entities only by giving them boundaries and defining them using 'sign'-s. + +In this way the 'sign'-ed entity becomes an 'object', and the 'object' is the basic entity needed in order to apply a logical formalism to the real world entities (i.e. we can speak of it through its sign, and use logics on it through its sign). + The object, in Peirce semiotics, as participant to a semiotic process. + SemioticObject + Object + SemioticObject + The object, in Peirce semiotics, as participant to a semiotic process. - - - - - - BeginTile - BeginTile + + + + Property of a solute in a solution. + StandardAbsoluteActivity + StandardAbsoluteActivityInASolution + StandardAbsoluteActivity + https://www.wikidata.org/wiki/Q89485936 + 9-26 + Property of a solute in a solution. - - + + + - Real part of the impedance. - ResistanceToAlternativeCurrent - ResistanceToAlternativeCurrent - https://www.wikidata.org/wiki/Q1048490 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-45 - 6-51.2 - Real part of the impedance. + The exponential of the ratio of the chemical potential to R*T where R is the gas constant and T the thermodynamic temperature. + AbsoluteActivity + AbsoluteActivity + https://qudt.org/vocab/quantitykind/AbsoluteActivity + https://www.wikidata.org/wiki/Q56638155 + 9-18 + The exponential of the ratio of the chemical potential to R*T where R is the gas constant and T the thermodynamic temperature. + https://goldbook.iupac.org/terms/view/A00019 + + + + + + SizeDefinedMaterial + SizeDefinedMaterial + + + + + + + A instance of a material (e.g. nitrogen) can represent different states of matter. The fact that the individual also belongs to other classes (e.g. Gas) would reveal the actual form in which the material is found. + The class of individuals standing for an amount of ordinary matter substance (or mixture of substances) in different states of matter or phases. + Material + Material + The class of individuals standing for an amount of ordinary matter substance (or mixture of substances) in different states of matter or phases. + A instance of a material (e.g. nitrogen) can represent different states of matter. The fact that the individual also belongs to other classes (e.g. Gas) would reveal the actual form in which the material is found. + Material usually means some definite kind, quality, or quantity of matter, especially as intended for use. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + "Real scalar quantity, defined and adopted by convention, with which any other quantity of the same kind can be compared to express the ratio of the second quantity to the first one as a number" +ISO 80000-1 + A metrological reference for a physical quantity. + MeasurementUnit + MeasurementUnit + A metrological reference for a physical quantity. + kg +m/s +km + measurement unit (VIM3 1.9) + "Real scalar quantity, defined and adopted by convention, with which any other quantity of the same kind can be compared to express the ratio of the second quantity to the first one as a number" +ISO 80000-1 + "Unit symbols are mathematical entities and not abbreviations." + +"Symbols for units are treated as mathematical entities. In expressing the value of a quantity as the product of a numerical value and a unit, both the numerical value and the unit may be treated by the ordinary rules of algebra." + +https://www.bipm.org/utils/common/pdf/si-brochure/SI-Brochure-9-EN.pdf + Measurement units and procedure units are disjoint. + Quantitative value are expressed as a multiple of the 'MeasurementUnit'. - - - - - - - - - - - - - Inverse of 'ElectricalConductance'. - Measure of the difficulty to pass an electric current through a material. - ElectricResistance - Resistance - ElectricResistance - http://qudt.org/vocab/quantitykind/Resistance - https://www.wikidata.org/wiki/Q25358 - 6-46 - Measure of the difficulty to pass an electric current through a material. - https://doi.org/10.1351/goldbook.E01936 + + + + + RedStrangeAntiQuark + RedStrangeAntiQuark - - - - - - - - - - - - A perspective characterized by the belief that some mereological parts of a whole (holistic parts) are intimately interconnected and explicable only by reference to the whole and vice versa. - An holistic perspective considers each part of the whole as equally important, without the need to position the parts within a hierarchy (in time or space). The interest is on the whole object and on its parts (how they contribute to the whole, i.e. their roles), without going further into specifying the spatial hierarchy or the temporal position of each part. + + + + + + A guess is a theory, estimated and subjective, since its premises are subjective. + Guess + Guess + A guess is a theory, estimated and subjective, since its premises are subjective. + -This class allows the picking of parts without necessarily going trough a rigid hierarchy of spatial compositions (e.g. body -> organ -> cell -> molecule) or temporal composition. This is inline with the transitive nature of parthood, as it is usually defined in literature. + + + + A coded conventional that cannot be univocally determined and depends on an agent (e.g. a human individual, a community) acting as black-box. + The word subjective applies to property intrisically subjective or non-well defined. In general, when an black-box-like procedure is used for the definition of the property. -The holistic perspective is not excluding the reductionistic perspective, on the contrary it can be considered its complement. - The union of classes whole and part. - Holistic - Wholistic - Holistic - An holistic perspective considers each part of the whole as equally important, without the need to position the parts within a hierarchy (in time or space). The interest is on the whole object and on its parts (how they contribute to the whole, i.e. their roles), without going further into specifying the spatial hierarchy or the temporal position of each part. +This happens due to e.g. the complexity of the object, the lack of a underlying model for the representation of the object, the non-well specified meaning of the property symbols. -This class allows the picking of parts without necessarily going trough a rigid hierarchy of spatial compositions (e.g. body -> organ -> cell -> molecule) or temporal composition. This is inline with the transitive nature of parthood, as it is usually defined in literature. +A 'SubjectiveProperty' cannot be used to univocally compare 'Object'-s. -The holistic perspective is not excluding the reductionistic perspective, on the contrary it can be considered its complement. - The union of classes whole and part. - A perspective characterized by the belief that some mereological parts of a whole (holistic parts) are intimately interconnected and explicable only by reference to the whole and vice versa. - A molecule of a body can have role in the body evolution, without caring if its part of a specific organ and without specifying the time interval in which this role occurred. - A product is a role that can be fulfilled by many objects, but always requires a process to which the product participates and from which it is generated. +e.g. you cannot evaluate the beauty of a person on objective basis. + Subjective + Subjective + A coded conventional that cannot be univocally determined and depends on an agent (e.g. a human individual, a community) acting as black-box. + The beauty of that girl. +The style of your clothing. - - - - process of joining materials to make parts from 3D model data, usually layer upon layer, as opposed to subtractive manufacturing (3.1.29) and formative manufacturing methodologies, - AdditiveManufacturing - GenerativeManufacturing - AdditiveManufacturing - process of joining materials to make parts from 3D model data, usually layer upon layer, as opposed to subtractive manufacturing (3.1.29) and formative manufacturing methodologies, + + + + A 'conventional' that stand for a 'physical'. + The 'theory' is e.g. a proposition, a book or a paper whose sub-symbols suggest in the mind of the interpreter an interpretant structure that can represent a 'physical'. + +It is not an 'icon' (like a math equation), because it has no common resemblance or logical structure with the 'physical'. + +In Peirce semiotics: legisign-symbol-argument + Theory + Theory + A 'conventional' that stand for a 'physical'. - - - - Strengthening by rolling is the strengthening of component surfaces by mechanically generating compressive stresses in the component surface and consolidating the material. - HardeningByRolling - VerfestigendurchWalzen - HardeningByRolling - Strengthening by rolling is the strengthening of component surfaces by mechanically generating compressive stresses in the component surface and consolidating the material. + + + + Estimated + Estimated + The biography of a person that the author have not met. - - - - HardeningByForming - Verfestigen durch Umformen - HardeningByForming + + + + + CharacterisationHardwareSpecification + CharacterisationHardwareSpecification - - - - + + + + - - + + - - SurfaceTension - 4-26 - SurfaceTension - https://qudt.org/vocab/quantitykind/SurfaceTension - https://www.wikidata.org/wiki/Q170749 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-42 - https://doi.org/10.1351/goldbook.S06192 - - - - - - - T-3 L0 M+1 I0 Θ0 N0 J0 - - - - - PowerDensityUnit - PowerDensityUnit + + A system is conceived as an aggregate of things that 'work' (or interact) together. While a system extends in time through distinct temporal parts (like every other 4D object), this elucdation focuses on a timescale in which the obejct shows a persistence in time. + An object that is made of a set of sub objects working together as parts of a mechanism or an interconnecting network (natural or artificial); a complex whole. + HolisticSystem + HolisticSystem + An object that is made of a set of sub objects working together as parts of a mechanism or an interconnecting network (natural or artificial); a complex whole. - - + + + + - - - - - - + + - - A strict fundamental object overcrossing a manufacturing process, the intersection being the agent that participates and drives the manufacturing process. - Manufacturer - Manufacturer - A strict fundamental object overcrossing a manufacturing process, the intersection being the agent that participates and drives the manufacturing process. - - - - - - - - - - - - - - - The class of individuals that satisfy a whole defining criteria (i.e. belongs to a subclass of whole) and have no proper parts that satisfy that same criteria (no parts that are of the same type of the whole). - StrictFundamental - StrictFundamental - The class of individuals that satisfy a whole defining criteria (i.e. belongs to a subclass of whole) and have no proper parts that satisfy that same criteria (no parts that are of the same type of the whole). - - - - - - - - - + + - - Physical quantity of dimension energy × time. - Action - Action - https://qudt.org/vocab/quantitykind/Action - https://www.wikidata.org/wiki/Q846785 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-51 - 4-32 - Physical quantity of dimension energy × time. - - - - - - The general principle of freezing point depression osmometry involves the relationship between the number of moles of dissolved solute in a solution and the change in freezing point. - - FreezingPointDepressionOsmometry - FreezingPointDepressionOsmometry - The general principle of freezing point depression osmometry involves the relationship between the number of moles of dissolved solute in a solution and the change in freezing point. - - - - - Osmometry is an advanced analytical method for determining the osmotic concentration of solutions. The osmotic – or solute – concentration of a colloidal system is expressed in osmoles (Osm) per unit of volume (Osm/L) or weight (Osm/kg). - - Osmometry - Osmometry - Osmometry is an advanced analytical method for determining the osmotic concentration of solutions. The osmotic – or solute – concentration of a colloidal system is expressed in osmoles (Osm) per unit of volume (Osm/L) or weight (Osm/kg). + Device used for making measurements, alone or in conjunction with one or more supplementary +devices +NOTE 1 A measuring instrument that can be used alone for making measurements is a measuring system. +NOTE 2 A measuring instrument is either an indicating measuring instrument or a material measure. + The instrument used for characterising a material, which usually has a probe and a detector as parts. + CharacterisationMeasurementInstrument + CharacterisationMeasurementInstrument + Device used for making measurements, alone or in conjunction with one or more supplementary +devices +NOTE 1 A measuring instrument that can be used alone for making measurements is a measuring system. +NOTE 2 A measuring instrument is either an indicating measuring instrument or a material measure. + The instrument used for characterising a material, which usually has a probe and a detector as parts. + In nanoindentation is the nanoindenter + Measuring instrument - - - - - CharacterisationEnvironmentProperty - CharacterisationEnvironmentProperty + + + + Unit for quantities of dimension one that are the fraction of two pressures. + PressureFractionUnit + PressureFractionUnit + Unit for quantities of dimension one that are the fraction of two pressures. - - + + - A language entity used in the metrology discipline. - Metrology is the science of measurement and its application and includes all theoretical and practical aspects of measurement, whatever the measurement uncertainty and field of application (VIM3 2.2) - Metrological - Metrological - A language entity used in the metrology discipline. - Metrology is the science of measurement and its application and includes all theoretical and practical aspects of measurement, whatever the measurement uncertainty and field of application (VIM3 2.2) + "Quantity, in a system of quantities, defined in terms of the base quantities of that system". + DerivedQuantity + DerivedQuantity + "Quantity, in a system of quantities, defined in terms of the base quantities of that system". + derived quantity - - - - - - - - - - - - Structural - Structural + + + + Quantities declared under the ISO 80000. + InternationalSystemOfQuantity + https://www.iso.org/obp/ui/#iso:std:iso:80000:-1:ed-1:v1:en:sec:3.1 + InternationalSystemOfQuantity + Quantities declared under the ISO 80000. + https://en.wikipedia.org/wiki/International_System_of_Quantities - - - - - Gas is a compressible fluid, a state of matter that has no fixed shape and no fixed volume. - Gas - Gas - Gas is a compressible fluid, a state of matter that has no fixed shape and no fixed volume. + + + + FiberboardManufacturing + FiberboardManufacturing - - - - - - - - - - - - - The derivative of the electric charge of a system with respect to the electric potential. - Capacitance - ElectricCapacitance - Capacitance - http://qudt.org/vocab/quantitykind/Capacitance - 6-13 - The derivative of the electric charge of a system with respect to the electric potential. - https://doi.org/10.1351/goldbook.C00791 + + + + FormingFromChip + FormingFromChip - - - - - + + - - + + T-1 L-3 M0 I0 Θ0 N+1 J0 - + + - The total luminous flux incident on a surface, per unit area. - Illuminance - Illuminance - http://qudt.org/vocab/quantitykind/Illuminance - The total luminous flux incident on a surface, per unit area. - https://doi.org/10.1351/goldbook.I02941 + AmountPerVolumeTimeUnit + AmountPerVolumeTimeUnit - - - - An icon that focus on HOW the object works. - An icon that represents the internal logical structure of the object. - AnalogicalIcon - AnalogicalIcon - An icon that represents the internal logical structure of the object. - A physics equation is replicating the mechanisms internal to the object. - Electrical diagram is diagrammatic and resemblance - MODA and CHADA are diagrammatic representation of a simulation or a characterisation workflow. - An icon that focus on HOW the object works. - The subclass of icon inspired by Peirceian category (b) the diagram, whose internal relations, mainly dyadic or so taken, represent by analogy (with the same logic) the relations in something (e.g. math formula, geometric flowchart). + + + + + Voltage between substances a and b caused by the thermoelectric effect. + ThermoelectricVoltage + ThermoelectricVoltage + https://www.wikidata.org/wiki/Q105761637 + 12-20 + Voltage between substances a and b caused by the thermoelectric effect. - - - - A construction language used to make queries in databases and information systems. - QueryLanguage - QueryLanguage - A construction language used to make queries in databases and information systems. - SQL, SPARQL - https://en.wikipedia.org/wiki/Query_language + + + + Correspond to the work needed per unit of charge to move a test charge between two points in a static electric field. + The difference in electric potential between two points. + Voltage + ElectricPotentialDifference + ElectricTension + Voltage + http://qudt.org/vocab/quantitykind/Voltage + 6-11.3 + The difference in electric potential between two points. + https://doi.org/10.1351/goldbook.V06635 + https://doi.org/10.1351/goldbook.A00424 - - - - - - - - - - - - - - - - - - - + + - CharmAntiQuark - CharmAntiQuark + The class of individuals that stand for gravitons elementary particles. + While this particle is only supposed to exist, the EMMO approach to classical and quantum systems represents fields as made of particles. + +For this reason graviton is an useful concept to homogenize the approach between different fields. + Graviton + Graviton + The class of individuals that stand for gravitons elementary particles. + While this particle is only supposed to exist, the EMMO approach to classical and quantum systems represents fields as made of particles. + +For this reason graviton is an useful concept to homogenize the approach between different fields. + https://en.wikipedia.org/wiki/Graviton - - - - Observed - Observed - The biography of a person met by the author. + + + + A measuring instrument that can be used alone is a measuring system. + Device used for making measurements, alone or in conjunction with one or more supplementary devices. + +-- VIM + MeasuringInstrument + MeasuringInstrument + Device used for making measurements, alone or in conjunction with one or more supplementary devices. + +-- VIM + measuring instrument - - - - - Sum of the slowing-down area from fission energy to thermal energy and the diffusion area for thermal neutrons. - MigrationArea - MigrationArea - https://qudt.org/vocab/quantitykind/MigrationArea - https://www.wikidata.org/wiki/Q98966325 - 10-72.3 - Sum of the slowing-down area from fission energy to thermal energy and the diffusion area for thermal neutrons. + + + + An observer that makes use of a measurement tool and provides a quantitative property. + Measurer + Measurer + An observer that makes use of a measurement tool and provides a quantitative property. + + + + + + + T+3 L-2 M-1 I+2 Θ0 N0 J0 + + + + + ElectricConductanceUnit + ElectricConductanceUnit + + + + + + Mass spectrometry is a powerful analytical technique used to quantify known materials, to identify unknown compounds within a sample, and to elucidate the structure and chemical properties of different molecules. + + MassSpectrometry + MassSpectrometry + Mass spectrometry is a powerful analytical technique used to quantify known materials, to identify unknown compounds within a sample, and to elucidate the structure and chemical properties of different molecules. + + + + + + Spectroscopic techniques are numerous and varied, but all involve measuring the response of a material to different frequencies of electromagnetic radiation. Depending on the technique used, material characterization may be based on the absorption, emission, impedance, or reflection of incident energy by a sample. + + Spectrometry + Spectrometry + Spectroscopic techniques are numerous and varied, but all involve measuring the response of a material to different frequencies of electromagnetic radiation. Depending on the technique used, material characterization may be based on the absorption, emission, impedance, or reflection of incident energy by a sample. - + - T0 L0 M+1 I0 Θ0 N0 J0 + T-2 L+3 M0 I0 Θ0 N0 J0 - MassUnit - MassUnit + VolumePerSquareTimeUnit + VolumePerSquareTimeUnit - - - - a method for analyzing the crystal structure of powdered materials by measuring the diffraction patterns produced when X-rays interact with randomly oriented crystallites within the sample - - XrayPowderDiffraction - XRPD - XrayPowderDiffraction - a method for analyzing the crystal structure of powdered materials by measuring the diffraction patterns produced when X-rays interact with randomly oriented crystallites within the sample - https://en.wikipedia.org/wiki/Powder_diffraction + + + + + + + + + + + + In the usual geometrical three-dimensional space, position vectors are quantities of the dimension length. + +-- IEC + Position vectors are so-called bounded vectors, i.e. their magnitude and direction depend on the particular coordinate system used. + +-- ISO 80000-3 + Vector r characterizing a point P in a point space with a given origin point O. + PositionVector + Position + PositionVector + http://qudt.org/vocab/quantitykind/PositionVector + Vector r characterizing a point P in a point space with a given origin point O. - - - - a technique used to analyze the atomic and molecular structure of crystalline materials by observing the diffraction patterns produced when X-rays interact with the regular array of atoms in the crystal lattice - - XrayDiffraction - XRD - XrayDiffraction - https://www.wikidata.org/wiki/Q12101244 - a technique used to analyze the atomic and molecular structure of crystalline materials by observing the diffraction patterns produced when X-rays interact with the regular array of atoms in the crystal lattice - https://en.wikipedia.org/wiki/X-ray_crystallography + + + + + + + + + + + 1-dimensional array who's spatial direct parts are numbers. + Vector + 1DArray + LinearArray + Vector + 1-dimensional array who's spatial direct parts are numbers. - - + + + + TransferMolding + TransferMolding + + + + + - For a two-terminal element or a two-terminal circuit under periodic conditions, quantity equal to the square root of the difference of the squares of the apparent power S and the active power P. - NonActivePower - NonActivePower - https://qudt.org/vocab/quantitykind/NonActivePower - https://www.wikidata.org/wiki/Q79813060 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-11-43 - 6-61 - For a two-terminal element or a two-terminal circuit under periodic conditions, quantity equal to the square root of the difference of the squares of the apparent power S and the active power P. + The rest mass of a proton. + ProtonMass + ProtonMass + http://qudt.org/vocab/constant/ProtonMass + https://doi.org/10.1351/goldbook.P04914 - - + - + - + - Rate of transfer of energy per unit time. - Power - Power - http://qudt.org/vocab/quantitykind/Power - 4-27 - 6-45 - Rate of transfer of energy per unit time. - https://doi.org/10.1351/goldbook.P04792 + JouleThomsonCoefficient + JouleThomsonCoefficient + https://www.wikidata.org/wiki/Q93946998 + 5-24 - - - - HandlingDevice - HandlingDevice + + + + + + + + + + + + + One-dimensional subspace of space-time, which is locally orthogonal to space. + The indefinite continued progress of existence and events that occur in apparently irreversible succession from the past through the present to the future. + Time can be seen as the duration of an event or, more operationally, as "what clocks read". + Time + Time + http://qudt.org/vocab/quantitykind/Time + One-dimensional subspace of space-time, which is locally orthogonal to space. + 3-7 + The indefinite continued progress of existence and events that occur in apparently irreversible succession from the past through the present to the future. + https://doi.org/10.1351/goldbook.T06375 - - - - An object which is instrumental for reaching a particular purpose through its characteristic functioning process, with particular reference to mechanical or electronic equipment. - Device - Equipment - Machine - Device - An object which is instrumental for reaching a particular purpose through its characteristic functioning process, with particular reference to mechanical or electronic equipment. + + + + + T-2 L+2 M+1 I-1 Θ0 N0 J0 + + + + + MagneticFluxUnit + MagneticFluxUnit - + - - - - + + + + - + + + + + + + + + + A characterisation procedure that has at least two characterisation tasks as proper parts. + CharacterisationWorkflow + CharacterisationWorkflow + A characterisation procedure that has at least two characterisation tasks as proper parts. + + + + + + + + + + + + + + + + + + + + + + + + + + CharacterisationTask + CharacterisationTask + + + + + + + + + + - Either a proton or a neutron. - Nucleon - Nucleon - Either a proton or a neutron. - https://en.wikipedia.org/wiki/Nucleon + The small, dense region at the centre of an atom consisting of protons and neutrons. + Nucleus + Nucleus + The small, dense region at the centre of an atom consisting of protons and neutrons. + + + + + + + Unit for dimensionless quantities that have the nature of count. + CountingUnit + CountingUnit + http://qudt.org/vocab/unit/NUM + 1 + Unit for dimensionless quantities that have the nature of count. + Unit of atomic number +Unit of number of cellular +Unit of degeneracy in quantum mechanics + + + + + + The subclass of measurement units with no physical dimension. + DimensionlessUnit + DimensionlessUnit + http://qudt.org/vocab/unit/UNITLESS + The subclass of measurement units with no physical dimension. + Refractive index +Plane angle +Number of apples - - - - - - - - - - - Subatomic particle which contains an odd number of valence quarks, at least 3. - Baryon - Baryon - Subatomic particle which contains an odd number of valence quarks, at least 3. - https://en.wikipedia.org/wiki/Baryon + + + + Quantum number of an atom describing the inclination of the nuclear spin with respect to a quantization axis given by the magnetic field produced by the orbital electrons. + HyperfineStructureQuantumNumber + HyperfineStructureQuantumNumber + https://qudt.org/vocab/quantitykind/HyperfineStructureQuantumNumber + https://www.wikidata.org/wiki/Q97577449 + 10-13.8 + Quantum number of an atom describing the inclination of the nuclear spin with respect to a quantization axis given by the magnetic field produced by the orbital electrons. - - - - - - - - - - - - - - + + + + + - - + + - - A computation that provides a data output following the elaboration of some input data, using a data processing application. - DataProcessing - DataProcessing - A computation that provides a data output following the elaboration of some input data, using a data processing application. - - - - - - A law that provides a connection between a property of the object and other properties, capturing a fundamental physical phenomena. - PhysicalLaw - PhysicalLaw - A law that provides a connection between a property of the object and other properties, capturing a fundamental physical phenomena. + + Difference between the mass of an atom, and the product of its mass number and the unified mass constant. + MassExcess + MassExcess + https://qudt.org/vocab/quantitykind/MassExcess + https://www.wikidata.org/wiki/Q1571163 + 10-21.1 + Difference between the mass of an atom, and the product of its mass number and the unified mass constant. + https://doi.org/10.1351/goldbook.M03719 - - - - A scientific theory that focuses on a specific phenomena, for which a single statement (not necessariliy in mathematical form) can be expressed. - NaturalLaw - NaturalLaw - A scientific theory that focuses on a specific phenomena, for which a single statement (not necessariliy in mathematical form) can be expressed. + + + + + Force opposing the motion of a body sliding on a surface. + KineticFrictionForce + DynamicFrictionForce + KineticFrictionForce + https://www.wikidata.org/wiki/Q91005629 + 4-9.4 + Force opposing the motion of a body sliding on a surface. - + - + - + - Coefficient in the law of recombination, - RecombinationCoefficient - RecombinationCoefficient - https://qudt.org/vocab/quantitykind/RecombinationCoefficient - https://www.wikidata.org/wiki/Q98842099 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-06-47 - 10-63 - Coefficient in the law of recombination, + The relation between electric field strength and current density in an isotropic conductor. + HallCoefficient + HallCoefficient + https://qudt.org/vocab/quantitykind/HallCoefficient + https://www.wikidata.org/wiki/Q997439 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=521-09-02 + 12-19 + The relation between electric field strength and current density in an isotropic conductor. - + @@ -9905,322 +8497,341 @@ The holistic perspective is not excluding the reductionistic perspective, on the - + - Scalar line integral of the magnetic field strength along a closed path. - MagnetomotiveForce - MagnetomotiveForce - https://qudt.org/vocab/quantitykind/MagnetomotiveForce - https://www.wikidata.org/wiki/Q1266982 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-60 - 6-37.3 - Scalar line integral of the magnetic field strength along a closed path. + Inverse of the reluctance. + Permeance + Permeance + https://qudt.org/vocab/quantitykind/Permeance + https://www.wikidata.org/wiki/Q77997985 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-29 + 6-40 + Inverse of the reluctance. - - - - - A type of sol in the form of one solid dispersed in liquid. - LiquidSol - LiquidSol - A type of sol in the form of one solid dispersed in liquid. + + + + + T-1 L+1 M+1 I0 Θ0 N0 J0 + + + + + MomentumUnit + MomentumUnit - - - - - - A liquid is a nearly incompressible fluid that conforms to the shape of its container but retains a (nearly) constant volume independent of pressure. - Liquid - Liquid - A liquid is a nearly incompressible fluid that conforms to the shape of its container but retains a (nearly) constant volume independent of pressure. + + + + + + + + + + + + + In nuclear physics, time derivative of the energy fluence. + EnergyFluenceRate + EnergyFluenceRate + https://qudt.org/vocab/quantitykind/EnergyFluenceRate + https://www.wikidata.org/wiki/Q98538655 + 10-47 + In nuclear physics, time derivative of the energy fluence. - - - - PhysicalyUnbonded - PhysicalyUnbonded + + + + Transmission electron microscopy (TEM) is a microscopy technique in which a beam of electrons is transmitted through a specimen to form an image. The specimen is most often an ultrathin section less than 100 nm thick or a suspension on a grid. An image is formed from the interaction of the electrons with the sample as the beam is transmitted through the specimen. The image is then magnified and focused onto an imaging device, such as a fluorescent screen, a layer of photographic film, or a sensor such as a scintillator attached to a charge-coupled device. + + TransmissionElectronMicroscopy + TEM + TransmissionElectronMicroscopy + Transmission electron microscopy (TEM) is a microscopy technique in which a beam of electrons is transmitted through a specimen to form an image. The specimen is most often an ultrathin section less than 100 nm thick or a suspension on a grid. An image is formed from the interaction of the electrons with the sample as the beam is transmitted through the specimen. The image is then magnified and focused onto an imaging device, such as a fluorescent screen, a layer of photographic film, or a sensor such as a scintillator attached to a charge-coupled device. - - - - - - - - - - - - - - - PhysicallyInteractingConvex - PhysicallyInteractingConvex + + + + A subclass of measurement unit focusing on the physical dimensionality that is carried by the unit. + The current version of EMMO does not provide explicit classes for physical dimensions. Rather it embraces the fact that the physical dimensionality of a physical quantity is carried by its measurement unit. + +The role of dimensional unit and its subclasses is to express the physical dimensionality that is carried by the unit. + +Since the dimensionality of a physical quantity can be written as the product of powers of the physical dimensions of the base quantities in the selected system of quantities, the physical dimensionality of a measurement unit is uniquely determined by the exponents. For a dimensional unit, at least one of these exponents must be non-zero (making it disjoint from dimensionless units). + DimensionalUnit + DimensionalUnit + A subclass of measurement unit focusing on the physical dimensionality that is carried by the unit. + The current version of EMMO does not provide explicit classes for physical dimensions. Rather it embraces the fact that the physical dimensionality of a physical quantity is carried by its measurement unit. + +The role of dimensional unit and its subclasses is to express the physical dimensionality that is carried by the unit. + +Since the dimensionality of a physical quantity can be written as the product of powers of the physical dimensions of the base quantities in the selected system of quantities, the physical dimensionality of a measurement unit is uniquely determined by the exponents. For a dimensional unit, at least one of these exponents must be non-zero (making it disjoint from dimensionless units). - - - - Mass spectrometry is a powerful analytical technique used to quantify known materials, to identify unknown compounds within a sample, and to elucidate the structure and chemical properties of different molecules. - - MassSpectrometry - MassSpectrometry - Mass spectrometry is a powerful analytical technique used to quantify known materials, to identify unknown compounds within a sample, and to elucidate the structure and chemical properties of different molecules. + + + + + Scalar or tensor quantity the product of which by the magnetic constant μ0 and by the magnetic field strength H is equal to the magnetic polarization J. + MagneticSusceptibility + MagneticSusceptibility + https://qudt.org/vocab/unit/SUSCEPTIBILITY_MAG.html + https://www.wikidata.org/wiki/Q691463 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-12-37 + 6-28 + Scalar or tensor quantity the product of which by the magnetic constant μ0 and by the magnetic field strength H is equal to the magnetic polarization J. - + + + + + + + + + + + - - T+1 L0 M-1 I0 Θ0 N0 J0 + + - - - - MechanicalMobilityUnit - MechanicalMobilityUnit - - - - - - A coded that is not atomic with respect to a code of description. - A description is a collection of properties that depicts an object. It is not atomic since it is made of several properties collected together. - Description - Description - A coded that is not atomic with respect to a code of description. - A biography. - A sentence about some object, depticting its properties. - A description is a collection of properties that depicts an object. It is not atomic since it is made of several properties collected together. + + + A tessellation in which all tiles are connected through spatiotemporal relations hasNext or contacts. + SpatioTemporalTessellation + WellFormedTessellation + SpatioTemporalTessellation + A tessellation in which all tiles are connected through spatiotemporal relations hasNext or contacts. - + - - - T-1 L0 M0 I0 Θ0 N+1 J0 - + + + + + + + - - - CatalyticActivityUnit - CatalyticActivityUnit + + + + + + + + + + + + + https://w3id.org/emmo#EMMO_22c91e99_61f8_4433_8853_432d44a2a46a + SpatioTemporalTile + WellFormedTile + SpatioTemporalTile - - - - An holistic system of people that has its own functions with responsibilities, authorities and relationships to achieve its objectives. - Organisation - ISO 55000:2014 -organization: person or group of people that has its own functions with responsibilities, authorities and relationships to achieve its objectives - Organisation - An holistic system of people that has its own functions with responsibilities, authorities and relationships to achieve its objectives. + + + + + Hypothetical pressure of gas if it alone occupied the volume of the mixture at the same temperature. + PartialPressure + PartialPressure + https://qudt.org/vocab/quantitykind/PartialPressure + https://www.wikidata.org/wiki/Q27165 + 9-19 + Hypothetical pressure of gas if it alone occupied the volume of the mixture at the same temperature. + https://doi.org/10.1351/goldbook.P04420 - + + + - - - - - - - - - - - - - - - - - - A world entity is direct causally self-connected if any two parts that make up the whole are direct causally connected to each other. In the EMMO, topological connectivity is based on causality. -All physical objects, i.e. entities whose behaviour is explained by physics laws, are represented only by items. In other words, a physical object part is embedded in a direct causal graph that provides always a path between two of its parts. -Members of a collection lack such direct causality connection, i.e. they do not constitute a physical object. - -Following graph theory concepts, the quantums of an item are all connected together within a network of causal relations, forming a connected causal graph. A collection is then a set of disconnected graphs. - The class of individuals standing for direct causally self-connected world entities. - The disjoint union of Elementary, Quantum and CausalSystem classes. - Item - Item - A world entity is direct causally self-connected if any two parts that make up the whole are direct causally connected to each other. In the EMMO, topological connectivity is based on causality. -All physical objects, i.e. entities whose behaviour is explained by physics laws, are represented only by items. In other words, a physical object part is embedded in a direct causal graph that provides always a path between two of its parts. -Members of a collection lack such direct causality connection, i.e. they do not constitute a physical object. - -Following graph theory concepts, the quantums of an item are all connected together within a network of causal relations, forming a connected causal graph. A collection is then a set of disconnected graphs. - The disjoint union of Elementary, Quantum and CausalSystem classes. - The class of individuals standing for direct causally self-connected world entities. + + + + + + + + + The force applied perpendicular to the surface of an object per unit area over which that force is distributed. + Pressure + Pressure + http://qudt.org/vocab/quantitykind/Pressure + 4-14.1 + The force applied perpendicular to the surface of an object per unit area over which that force is distributed. + https://doi.org/10.1351/goldbook.P04819 - - + + + The pulsed electroacoustic (PEA) method is an established method for space charge measurements in polymeric dielectrics. - CriticalAndSupercriticalChromatography - CriticalAndSupercriticalChromatography + PulsedElectroacousticMethod + PulsedElectroacousticMethod + The pulsed electroacoustic (PEA) method is an established method for space charge measurements in polymeric dielectrics. + https://doi.org/10.1007/s10832-023-00332-y - - - - In chemical analysis, chromatography is a laboratory technique for the separation of a mixture into its components. - - Chromatography - Chromatography - In chemical analysis, chromatography is a laboratory technique for the separation of a mixture into its components. - https://en.wikipedia.org/wiki/Chromatography + + + + Heat treatment process that generally produces martensite in the matrix. + Hardening + Hardening + Heat treatment process that generally produces martensite in the matrix. - - - - - Smallest energy difference between the lowest level of conduction band and the highest level of valence band at zero thermodynamic temperature. - GapEnergy - BandgapEnergy - GapEnergy - https://www.wikidata.org/wiki/Q103982939 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-06-16 - 12-27.2 - Smallest energy difference between the lowest level of conduction band and the highest level of valence band at zero thermodynamic temperature. - https://doi.org/10.1351/goldbook.B00593 + + + + The description of the overall characterisation method. It can be composed of different steps (e.g. sample preparation, calibration, measurement, post-processing). + A characterisation method is not only related to the measurement process which can be one of its steps. + CharacterisationTechnique + Characterisation procedure + Characterisation technique + CharacterisationTechnique + The description of the overall characterisation method. It can be composed of different steps (e.g. sample preparation, calibration, measurement, post-processing). + A characterisation method is not only related to the measurement process which can be one of its steps. - - - - LeftHandedParticle - LeftHandedParticle + + + + A declaration that provides a sign for an object that is independent from any assignment rule. + Naming + Naming + A declaration that provides a sign for an object that is independent from any assignment rule. + A unique id attached to an entity. - + + + + + + + + + + - - T-1 L-2 M+1 I0 Θ0 N0 J0 + + - - - - MassFluxUnit - MassFluxUnit + + + + + + + + + + + + + + + Declaration + ConventionalSemiosis + Declaration + + + + + + An agent that is driven by the intention to reach a defined objective in driving a process. + Intentionality is not limited to human agents, but in general to all agents that have the capacity to decide to act in driving a process according to a motivation. + IntentionalAgent + IntentionalAgent + An agent that is driven by the intention to reach a defined objective in driving a process. + Intentionality is not limited to human agents, but in general to all agents that have the capacity to decide to act in driving a process according to a motivation. - + + + + A participant that is the driver of the process. + An agent is not necessarily human. +An agent plays an active role within the process. +An agent is a participant of a process that would not occur without it. + Agent + Agent + A participant that is the driver of the process. + A catalyst. A bus driver. A substance that is initiating a reaction that would not occur without its presence. + An agent is not necessarily human. +An agent plays an active role within the process. +An agent is a participant of a process that would not occur without it. + + + - historically for the analysis of metal ions, mercury ions were added to the test solution to form a mercury amalgam when reduced. Alternatively, an HMDE or MFE was used and the oxidizing agent added after amalgam formation. However, the toxicity of mercury and its compounds have all but precluded the present-day use of mercury - the accumulation is similar to that used in stripping voltammetry - the stripping potentiogram shows staircase curves of potential as a function of time. Frequently, the first derivative is displayed (dE/dt=f(t)), as this produces peak-shaped signals. The time between transitions (peaks) is proportional to the concentration of analyte in the test solution - the time between changes in potential in step 2 is related to the concentration of analyte in the solution - two-step electrochemical measurement in which 1) material is accumulated at an electrode and 2) the material is removed by chemical reaction or electrochemically at constant current with measurement of electrode potential + LSV corresponds to the first half cycle of cyclic voltammetry. + The peak current is expressed by the Randles-Ševčík equation. + The scan is usually started at a potential where no electrode reaction occurs. + Voltammetry in which the current is recorded as the electrode potential is varied linearly with time. - PotentiometricStrippingAnalysis - PSA - PotentiometricStrippingAnalysis - two-step electrochemical measurement in which 1) material is accumulated at an electrode and 2) the material is removed by chemical reaction or electrochemically at constant current with measurement of electrode potential + LinearScanVoltammetry + LSV + LinearPolarization + LinearSweepVoltammetry + LinearScanVoltammetry + https://www.wikidata.org/wiki/Q620700 + Voltammetry in which the current is recorded as the electrode potential is varied linearly with time. + https://en.wikipedia.org/wiki/Linear_sweep_voltammetry + https://doi.org/10.1515/pac-2018-0109 - + - + - + - In nuclear physics, time derivative of the energy fluence. - EnergyFluenceRate - EnergyFluenceRate - https://qudt.org/vocab/quantitykind/EnergyFluenceRate - https://www.wikidata.org/wiki/Q98538655 - 10-47 - In nuclear physics, time derivative of the energy fluence. - - - - - - - Radius of the circular movement of an electrically charged particle in a magnetic field. - Gyroradius - LarmorRadius - Gyroradius - https://www.wikidata.org/wiki/Q1194458 - 10-17 - Radius of the circular movement of an electrically charged particle in a magnetic field. - - - - - - - T0 L0 M0 I0 Θ0 N0 J+1 - - - - - LuminousIntensityUnit - LuminousIntensityUnit - - - - - - - A process which is an holistic temporal part of a process. - Stage - Stage - A process which is an holistic temporal part of a process. - Moving a leg is a stage of the process of running. - - - - - - - Positron - Positron + Difference between equilibrium and initial amount of a substance, divided by its stoichiometric number. + ExtentOfReaction + ExtentOfReaction + https://qudt.org/vocab/quantitykind/ExtentOfReaction + https://www.wikidata.org/wiki/Q899046 + 9-31 + Difference between equilibrium and initial amount of a substance, divided by its stoichiometric number. + https://doi.org/10.1351/goldbook.E02283 - - - - - - - - - - - - - - - - - - - - AntiElectronType - AntiElectronType + + + + High level description of the user case. It can include the properties of the material, the conditions of the environment and possibly mentioning which are the industrial sectors of reference. + UserCase + UserCase + High level description of the user case. It can include the properties of the material, the conditions of the environment and possibly mentioning which are the industrial sectors of reference. - + @@ -10228,509 +8839,401 @@ Following graph theory concepts, the quantums of an item are all connected toget - + - Quotient of the activity A of a sample and the mass m of that sample. - SpecificActivity - MassicActivity - SpecificActivity - https://qudt.org/vocab/quantitykind/SpecificActivity - https://www.wikidata.org/wiki/Q2823748 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-08 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-04-43 - 10-28 - Quotient of the activity A of a sample and the mass m of that sample. - https://doi.org/10.1351/goldbook.S05790 + For ionizing uncharged particles of a given type and energy, the differential quotient of Rtr with respect to l. Where Rtr is the mean energy that is transferred to kinetic energy of charged particles by interactions of the uncharged particles of incident radiant energy R in traversing a distance l in the material of density rho, divided by rho and R + MassEnergyTransferCoefficient + MassEnergyTransferCoefficient + https://qudt.org/vocab/quantitykind/MassEnergyTransferCoefficient + https://www.wikidata.org/wiki/Q99714619 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-04-32 + 10-87 + For ionizing uncharged particles of a given type and energy, the differential quotient of Rtr with respect to l. Where Rtr is the mean energy that is transferred to kinetic energy of charged particles by interactions of the uncharged particles of incident radiant energy R in traversing a distance l in the material of density rho, divided by rho and R - - - - - fraction of nearest-neighbour atom pairs in an Ising ferromagnet having magnetic moments in one direction, minus the fraction having magnetic moments in the opposite direction - ShortRangeOrderParameter - ShortRangeOrderParameter - https://qudt.org/vocab/quantitykind/Short-RangeOrderParameter - https://www.wikidata.org/wiki/Q105495979 - 12-5.1 - fraction of nearest-neighbour atom pairs in an Ising ferromagnet having magnetic moments in one direction, minus the fraction having magnetic moments in the opposite direction + + + + The class of individuals that satisfy a whole defining criteria (i.e. belongs to a subclass of whole) and have no temporal parts that satisfy that same criteria (no parts that are of the same type of the whole). + TemporallyFundamental + TemporallyFundamental + The class of individuals that satisfy a whole defining criteria (i.e. belongs to a subclass of whole) and have no temporal parts that satisfy that same criteria (no parts that are of the same type of the whole). - - - - A discrete schema may be based on a continuum material basis that is filtered according to its variations. For example, a continuous voltage based signal can be considered 1 or 0 according to some threshold. -Discrete does not mean tha the material basis is discrete, but that the data are encoded according to such step-based rules. - Data whose variations are decoded according to a discrete schema. - DiscreteData - DiscreteData - Data whose variations are decoded according to a discrete schema. - A text is a collection of discrete symbols. A compact disc is designed to host discrete states in the form of pits and lands. - A discrete schema may be based on a continuum material basis that is filtered according to its variations. For example, a continuous voltage based signal can be considered 1 or 0 according to some threshold. -Discrete does not mean tha the material basis is discrete, but that the data are encoded according to such step-based rules. + + + + A building or group of buildings where goods are manufactured or assembled. + Factory + IndustrialPlant + Factory + A building or group of buildings where goods are manufactured or assembled. - - - - Polynomial - Polynomial - 2 * x^2 + x + 3 + + + + ElectricCurrentAssistedSintering + ElectricCurrentAssistedSintering - - - - An expression that has parts only integer constants, variables, and the algebraic operations (addition, subtraction, multiplication, division and exponentiation by an exponent that is a rational number) - AlgebricExpression - AlgebricExpression - 2x+3 + + + + machining with a circular cutting movement in which the axis of rotation of the tool and the axis of the internal surface to be produced are identical and the feed movement is in the direction of this axis. The axis of rotation of the cutting movement maintains its position relative to the workpiece independently of the feed movement (axis of rotation workpiece-bound). + Drilling + Bohren + Drilling + + + + + + A simulation in which more than one model are solved together with a coupled method. + TightlyCoupledModelsSimulation + TightlyCoupledModelsSimulation + A simulation in which more than one model are solved together with a coupled method. + Solving within the same linear system the discretised form of the pressure and momentum equation for a fluid, using the ideal gas law as material relation for connecting pressure to density. + + + + + + + + + + + + + + + + + + + + + + + + + + A baryon containing one or more strange quarks, but no charm, bottom, or top quark. + This form of matter may exist in a stable form within the core of some neutron stars. + Hyperon + Hyperon + A baryon containing one or more strange quarks, but no charm, bottom, or top quark. + This form of matter may exist in a stable form within the core of some neutron stars. + https://en.wikipedia.org/wiki/Hyperon - - - + + + - The quantum of action. It defines the kg base unit in the SI system. - PlanckConstant - PlanckConstant - http://qudt.org/vocab/constant/PlanckConstant - The quantum of action. It defines the kg base unit in the SI system. - https://doi.org/10.1351/goldbook.P04685 + in the free electron model, the Fermi energy divided by the Boltzmann constant + FermiTemperature + FermiTemperature + https://qudt.org/vocab/quantitykind/FermiTemperature + https://www.wikidata.org/wiki/Q105942324 + 12-28 + in the free electron model, the Fermi energy divided by the Boltzmann constant - + - + - + - Measure of the extent and direction an object rotates about a reference point. - AngularMomentum - AngularMomentum - http://qudt.org/vocab/quantitykind/AngularMomentum - 4-11 - https://doi.org/10.1351/goldbook.A00353 - - - - - - A estimator that uses its predefined knowledge to declare a property of an object. - Assigner - Assigner - A estimator that uses its predefined knowledge to declare a property of an object. - I estimate the molecular mass of the gas in my bottle as 1.00784 u because it is tagged as H. + Surface density of electric charge multiplied by velocity + LinearElectricCurrentDensity + LinearElectricCurrentDensity + https://qudt.org/vocab/quantitykind/LinearElectricCurrentDensity + https://www.wikidata.org/wiki/Q2356741 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-12 + 6-9 + Surface density of electric charge multiplied by velocity - - - - A characteriser that declares a property for an object without actually interact with it with the specific interaction required by the property definition (i.e. infer a property from other properties). - Estimator - Estimator - A characteriser that declares a property for an object without actually interact with it with the specific interaction required by the property definition (i.e. infer a property from other properties). + + + + An holistic temporal part of a whole. + TemporalRole + HolisticTemporalPart + TemporalRole + An holistic temporal part of a whole. - - - - Describes the level of expertise required to carry out a process (the entire test or the data processing). - - LevelOfExpertise - LevelOfExpertise - Describes the level of expertise required to carry out a process (the entire test or the data processing). + + + + + Chosen value of amount concentration, usually equal to 1 mol dm−3. + StandardAmountConcentration + StandardConcentration + StandardMolarConcentration + StandardAmountConcentration + https://www.wikidata.org/wiki/Q88871689 + Chosen value of amount concentration, usually equal to 1 mol dm−3. + 9-12.2 + https://doi.org/10.1351/goldbook.S05909 - - - + + + - + - For ionizing uncharged particles of a given type and energy, the differential quotient of Rtr with respect to l. Where Rtr is the mean energy that is transferred to kinetic energy of charged particles by interactions of the uncharged particles of incident radiant energy R in traversing a distance l in the material of density rho, divided by rho and R - MassEnergyTransferCoefficient - MassEnergyTransferCoefficient - https://qudt.org/vocab/quantitykind/MassEnergyTransferCoefficient - https://www.wikidata.org/wiki/Q99714619 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-04-32 - 10-87 - For ionizing uncharged particles of a given type and energy, the differential quotient of Rtr with respect to l. Where Rtr is the mean energy that is transferred to kinetic energy of charged particles by interactions of the uncharged particles of incident radiant energy R in traversing a distance l in the material of density rho, divided by rho and R - - - - - - - Inverse of the radius of curvature. - Curvature - Curvature - https://qudt.org/vocab/quantitykind/CurvatureFromRadius - https://www.wikidata.org/wiki/Q214881 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-01-31 - https://dbpedia.org/page/Curvature - 3-2 - Inverse of the radius of curvature. + The amount of a constituent divided by the volume of the mixture. + AmountConcentration + Concentration + MolarConcentration + Molarity + AmountConcentration + http://qudt.org/vocab/quantitykind/AmountOfSubstanceConcentrationOfB + https://doi.org/10.1351/goldbook.A00295 - - + + - Describes how raw data are corrected and/or modified through calibrations. + Osmometry is an advanced analytical method for determining the osmotic concentration of solutions. The osmotic – or solute – concentration of a colloidal system is expressed in osmoles (Osm) per unit of volume (Osm/L) or weight (Osm/kg). - DataProcessingThroughCalibration - DataProcessingThroughCalibration - Describes how raw data are corrected and/or modified through calibrations. + Osmometry + Osmometry + Osmometry is an advanced analytical method for determining the osmotic concentration of solutions. The osmotic – or solute – concentration of a colloidal system is expressed in osmoles (Osm) per unit of volume (Osm/L) or weight (Osm/kg). - - - + + + - GrandCanonicalPartionFunction - GrandPartionFunction - GrandCanonicalPartionFunction - https://qudt.org/vocab/quantitykind/GrandCanonicalPartitionFunction - https://www.wikidata.org/wiki/Q96176022 - 9-35.3 - - - - - - InterferenceFitting - InterferenceFitting - - - - - - - - - - - - - - - A 'Sign' can have temporal-direct-parts which are 'Sign' themselves. - -A 'Sign' usually havs 'sign' spatial direct parts only up to a certain elementary semiotic level, in which the part is only a 'Physical' and no more a 'Sign' (i.e. it stands for nothing). This elementary semiotic level is peculiar to each particular system of signs (e.g. text, painting). - -Just like an 'Elementary' in the 'Physical' branch, each 'Sign' branch should have an a-tomistic mereological part. - According to Peirce, 'Sign' includes three subcategories: -- symbols: that stand for an object through convention -- indeces: that stand for an object due to causal continguity -- icons: that stand for an object due to similitudes e.g. in shape or composition - An 'Physical' that is used as sign ("semeion" in greek) that stands for another 'Physical' through an semiotic process. - Sign - Sign - An 'Physical' that is used as sign ("semeion" in greek) that stands for another 'Physical' through an semiotic process. - A novel is made of chapters, paragraphs, sentences, words and characters (in a direct parthood mereological hierarchy). - -Each of them are 'sign'-s. - -A character can be the a-tomistic 'sign' for the class of texts. - -The horizontal segment in the character "A" is direct part of "A" but it is not a 'sign' itself. - -For plain text we can propose the ASCII symbols, for math the fundamental math symbols. + Quantity wd = 1 − wH2O, where wH2O is mass fraction of water. + MassFractionOfDryMatter + MassFractionOfDryMatter + https://qudt.org/vocab/quantitykind/MassFractionOfDryMatter + https://www.wikidata.org/wiki/Q76379189 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-64 + 5-32 + Quantity wd = 1 − wH2O, where wH2O is mass fraction of water. - - - - A peak-shaped adsorptive stripping voltammogram is obtained. Peak current depends on time of accumulation, mass transport of analyte (stirring), scan rate and mode (linear or pulse), and analyte concentration in solution. AdSV is usually employed for analysis of organic compounds or metal complexes with organic ligands. Stripping is done by means of an anodic or a cathodic voltammetric scan (linear or pulse), during which the adsorbed compound is oxidized or reduced. - Stripping voltammetry involving pre-concentration by adsorption of the analyte (in contrast to electro-chemical accumulation). - AdsorptiveStrippingVoltammetry - AdSV - AdsorptiveStrippingVoltammetry - Stripping voltammetry involving pre-concentration by adsorption of the analyte (in contrast to electro-chemical accumulation). - https://doi.org/10.1515/pac-2018-0109 + + + + + Mass of a constituent divided by the total mass of all constituents in the mixture. + MassFraction + MassFraction + http://qudt.org/vocab/quantitykind/MassFraction + 9-11 + https://doi.org/10.1351/goldbook.M03722 - - + + - Anodic stripping voltammetry (ASV) was historically used to measure concentrations of metal ions in solution using cathodic accumulation with mercury to form an amalgam. Due to the toxicity of mercury and its compounds, inductively coupled plasma optical emission spectrometry and inductively coupled plasma mass spectrometry have frequently replaced ASV at mercury electrodes in the laboratory, often sacrificing the probing of speciation and lability in complex matrices. Mercury has now been replaced by non-toxic bismuth or anti- mony as films on a solid electrode support (such as glassy carbon) with equally good sensi- tivity and detection limits. - Because the accumulation (pre-concentration) step can be prolonged, increasing the amount of material at the electrode, stripping voltammetry is able to measure very small concentrations of analyte. - Often the product of the electrochemical stripping is identical to the analyte before the accumulation. - Stripping voltammetry is a calibrated method to establish the relation between amount accumulated in a given time and the concentration of the analyte in solution. - Types of stripping voltammetry refer to the kind of accumulation (e.g. adsorptive stripping voltammetry) or the polarity of the stripping electrochemistry (anodic, cathodic stripping voltammetry). - two-step electrochemical measurement in which 1) material is accumulated at an electrode and 2) the amount of an accumulated species is measured by voltammetry. The measured electric current in step 2 is related to the concentration of analyte in the solution by calibration. + Dynamic mechanical analysis (abbreviated DMA) is a characterisation technique where a sinusoidal stress is applied and the strain in the material is measured, allowing one to determine the complex modulus. The temperature of the sample or the frequency of the stress are often varied, leading to variations in the complex modulus; this approach can be used to locate the glass transition temperature[1] of the material, as well as to identify transitions corresponding to other molecular motions. - StrippingVoltammetry - StrippingVoltammetry - two-step electrochemical measurement in which 1) material is accumulated at an electrode and 2) the amount of an accumulated species is measured by voltammetry. The measured electric current in step 2 is related to the concentration of analyte in the solution by calibration. - https://en.wikipedia.org/wiki/Electrochemical_stripping_analysis - https://doi.org/10.1515/pac-2018-0109 + DynamicMechanicalAnalysis + DynamicMechanicalAnalysis + Dynamic mechanical analysis (abbreviated DMA) is a characterisation technique where a sinusoidal stress is applied and the strain in the material is measured, allowing one to determine the complex modulus. The temperature of the sample or the frequency of the stress are often varied, leading to variations in the complex modulus; this approach can be used to locate the glass transition temperature[1] of the material, as well as to identify transitions corresponding to other molecular motions. - - - - RightHandedParticle - RightHandedParticle + + + + Method of joining metallic materials with the aid of a molten filler metal (solder), optionally with the use of flow agents + Soldering + Löten + Soldering - - - - - - - - - - - - - - Any physical or virtual component of limited availability within a computer system. - SystemResource - Resource - SystemResource - Any physical or virtual component of limited availability within a computer system. + + + + + The DBpedia definition (http://dbpedia.org/page/Elementary_charge) is outdated as May 20, 2019. It is now an exact quantity. + The magnitude of the electric charge carried by a single electron. It defines the base unit Ampere in the SI system. + ElementaryCharge + ElementaryCharge + http://qudt.org/vocab/quantitykind/ElementaryCharge + 10-5.1 + The magnitude of the electric charge carried by a single electron. It defines the base unit Ampere in the SI system. + https://doi.org/10.1351/goldbook.E02032 - + + + - - + - ThermalDiffusivity - ThermalDiffusionCoefficient - ThermalDiffusivity - https://qudt.org/vocab/quantitykind/ThermalDiffusivity - https://www.wikidata.org/wiki/Q3381809 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-53 - 5-14 + The physical property of matter that causes it to experience a force when placed in an electromagnetic field. + ElectricCharge + Charge + ElectricCharge + http://qudt.org/vocab/quantitykind/ElectricCharge + https://www.wikidata.org/wiki/Q1111 + 6-2 + The physical property of matter that causes it to experience a force when placed in an electromagnetic field. + https://doi.org/10.1351/goldbook.E01923 - + - T+2 L0 M+1 I0 Θ0 N0 J0 + T0 L+2 M+1 I0 Θ0 N0 J0 - MassSquareTimeUnit - MassSquareTimeUnit - - - - - - - - - - - - - - - ParticulateMatter - ParticulateMatter + MassAreaUnit + MassAreaUnit - - - - - - - - - - - - + + - A characterisation of an object with an actual interaction. - Observation - Observation - A characterisation of an object with an actual interaction. - - - - - - A procedure can be considered as an intentional process with a plan. - The process in which an agent works with some entities according to some existing formalised operative rules. - The set of established forms or methods of an organized body for accomplishing a certain task or tasks (Wiktionary). - Procedure - Elaboration - Work - Procedure - The set of established forms or methods of an organized body for accomplishing a certain task or tasks (Wiktionary). - The process in which an agent works with some entities according to some existing formalised operative rules. - The process in which a control unit of a CPU (the agent) orchestrates some cached binary data according to a list of instructions (e.g. a program). -The process in which a librarian order books alphabetically on a shelf. -The execution of an algorithm. - A procedure can be considered as an intentional process with a plan. + A language object is a discrete data entity respecting a specific language syntactic rules (a well-formed formula). + Language + Language + A language object is a discrete data entity respecting a specific language syntactic rules (a well-formed formula). - - - - - T+3 L0 M-1 I0 Θ+1 N0 J0 - - - + + + - PerThermalTransmittanceUnit - PerThermalTransmittanceUnit + Mean total rectified path length travelled by a particle in the course of slowing down to rest in a given material averaged over a group of particles having the same initial energy. + MeanLinearRange + MeanLinearRange + https://qudt.org/vocab/quantitykind/MeanLinearRange + https://www.wikidata.org/wiki/Q98681589 + 10-56 + Mean total rectified path length travelled by a particle in the course of slowing down to rest in a given material averaged over a group of particles having the same initial energy. + https://doi.org/10.1351/goldbook.M03782 - - - - - Sum of the kinetic energy of the α-particle produced in the disintegration process and the recoil energy of the product atom in a reference frame in which the emitting nucleus is at rest before its disintegration. - AlphaDisintegrationEnergy - AlphaDisintegrationEnergy - http://qudt.org/vocab/quantitykind/AlphaDisintegrationEnergy - https://www.wikidata.org/wiki/Q98146025 - 10-32 - Sum of the kinetic energy of the α-particle produced in the disintegration process and the recoil energy of the product atom in a reference frame in which the emitting nucleus is at rest before its disintegration. + + + + A quantity that is the result of a well-defined measurement procedure. + The specification of a measurand requires knowledge of the kind of quantity, description of the state of the phenomenon, body, or substance carrying the quantity, including any relevant component, and the chemical entities involved. + +-- VIM + MeasuredProperty + MeasuredProperty + A quantity that is the result of a well-defined measurement procedure. - - - - A molecule composed of only one element type. - Homonuclear - ElementalMolecule - Homonuclear - A molecule composed of only one element type. - Hydrogen molecule (H₂). + + + + + The class of individuals that stand for electrons elementary particles belonging to the first generation of leptons. + Electron + Electron + The class of individuals that stand for electrons elementary particles belonging to the first generation of leptons. + https://en.wikipedia.org/wiki/Electron - - - - - - - - - - - - - - + + - + - - - - - - - - An atom_based state defined by an exact number of e-bonded atomic species and an electron cloud made of the shared electrons. - An entity is called essential if removing one direct part will lead to a change in entity class. -An entity is called redundand if removing one direct part will not lead to a change in entity class. - Molecule - ChemicalSubstance - Molecule - An atom_based state defined by an exact number of e-bonded atomic species and an electron cloud made of the shared electrons. - H₂0, C₆H₁₂O₆, CH₄ - An entity is called essential if removing one direct part will lead to a change in entity class. -An entity is called redundand if removing one direct part will not lead to a change in entity class. - This definition states that this object is a non-periodic set of atoms or a set with a finite periodicity. -Removing an atom from the state will result in another type of atom_based state. -e.g. you cannot remove H from H₂0 without changing the molecule type (essential). However, you can remove a C from a nanotube (redundant). C60 fullerene is a molecule, since it has a finite periodicity and is made of a well defined number of atoms (essential). A C nanotube is not a molecule, since it has an infinite periodicity (redundant). - - - - - - - A foam of trapped gas in a solid. - SolidFoam - SolidFoam - A foam of trapped gas in a solid. - Aerogel - - - - - - A colloid formed by trapping pockets of gas in a liquid or solid. - Foam - Foam - A colloid formed by trapping pockets of gas in a liquid or solid. - - - - - - - - - - - - - Characterisation can either be made in air (ambient conditions, without specific controls on environmental parameters), or at different temperatures, different pressures (or in vacuum), or using different types of working gases (inert or reactive with respect to sample), different levels of humidity, etc. - Medium of the characterisation experiment defined by the set of environmental conditions that are controlled and measured over time during the experiment. - CharacterisationEnvironment - CharacterisationEnvironment - Medium of the characterisation experiment defined by the set of environmental conditions that are controlled and measured over time during the experiment. - Characterisation can either be made in air (ambient conditions, without specific controls on environmental parameters), or at different temperatures, different pressures (or in vacuum), or using different types of working gases (inert or reactive with respect to sample), different levels of humidity, etc. + + + + + + + + + + + + + ElectronType + ElectronType - - - - - - - - - - - - - The relation between electric field strength and current density in an isotropic conductor. - HallCoefficient - HallCoefficient - https://qudt.org/vocab/quantitykind/HallCoefficient - https://www.wikidata.org/wiki/Q997439 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=521-09-02 - 12-19 - The relation between electric field strength and current density in an isotropic conductor. + + + + Material, sufficiently homogeneous and stable with reference to one or more specified properties, which has been established to be fit for its intended use in measurement or in examination +NOTE 1 Reference materials can be certified reference materials or reference materials without a certified property +value. +NOTE 2 For a reference material to be used as a measurement standard for calibration purposes it needs to be a certified reference material. +NOTE 3 Reference materials can be used for measurement precision evaluation and quality control. +EXAMPLE Human serum without an assigned quantity value for the amount-of-substance concentration of the inherent cholesterol, used for quality control. +NOTE 4 Properties of reference materials can be quantities or nominal properties. +NOTE 5 A reference material is sometimes incorporated into a specially fabricated device. +EXAMPLE Spheres of uniform size mounted on a microscope slide. +NOTE 6 Some reference materials have assigned values in a unit outside the SI. Such materials include vaccines to +which International Units (IU) have been assigned by the World Health Organization. +NOTE 7 A given reference material can only be used for one purpose in a measurement, either calibration or quality +control, but not both. +NOTE 8 ISO/REMCO has an analogous definition but uses the term “measurement process” (ISO Guide 30, Reference +materials – Selected terms and definitions, definition 2.1.1) for both measurement and examination. + +-- International Vocabulary of Metrology(VIM) + Material, sufficiently homogeneous and stable with respect to one or more specified properties, which has been established to be fit for its intended use in a measurement process”. + + ReferenceSample + Certified Reference Material + Reference material + ReferenceSpecimen + ReferenceSample + Material, sufficiently homogeneous and stable with reference to one or more specified properties, which has been established to be fit for its intended use in measurement or in examination +NOTE 1 Reference materials can be certified reference materials or reference materials without a certified property +value. +NOTE 2 For a reference material to be used as a measurement standard for calibration purposes it needs to be a certified reference material. +NOTE 3 Reference materials can be used for measurement precision evaluation and quality control. +EXAMPLE Human serum without an assigned quantity value for the amount-of-substance concentration of the inherent cholesterol, used for quality control. +NOTE 4 Properties of reference materials can be quantities or nominal properties. +NOTE 5 A reference material is sometimes incorporated into a specially fabricated device. +EXAMPLE Spheres of uniform size mounted on a microscope slide. +NOTE 6 Some reference materials have assigned values in a unit outside the SI. Such materials include vaccines to +which International Units (IU) have been assigned by the World Health Organization. +NOTE 7 A given reference material can only be used for one purpose in a measurement, either calibration or quality +control, but not both. +NOTE 8 ISO/REMCO has an analogous definition but uses the term “measurement process” (ISO Guide 30, Reference +materials – Selected terms and definitions, definition 2.1.1) for both measurement and examination. + +-- International Vocabulary of Metrology(VIM) + Quality control sample used to determine accuracy and precision of method. [ISO 17858:2007] + Material, sufficiently homogeneous and stable with respect to one or more specified properties, which has been established to be fit for its intended use in a measurement process”. + Reference material @@ -10759,303 +9262,377 @@ e.g. you cannot remove H from H₂0 without changing the molecule type (essentia 2-dimensional array who's spatial direct parts are vectors. - - - - - - - - - - - - - - A procedure that is an hoilistic part of a workflow. - A task is a generic part of a workflow, without taking care of the task granularities. -It means that you can declare that e.g. tightening a bolt is a task of building an airplane, without caring of the coarser tasks to which this tightening belongs. - Task - Job - Task - A procedure that is an hoilistic part of a workflow. - A task is a generic part of a workflow, without taking care of the task granularities. -It means that you can declare that e.g. tightening a bolt is a task of building an airplane, without caring of the coarser tasks to which this tightening belongs. - - - - - - Normally a standard solution is a solution of the ion at a molality of 1 mol/kg (exactly). Standardized conditions are normally 1013,25 hPa and 25 °C. - The correction factor is called activity coefficient and it is determined experimentally. See ActivityCoefficient - ratio of the product of ion molality b and a correction factor γ to the molality b° of the same ion in a standard solution under standardized conditions: a = bγ / b°. - IonActivity - IonActivity - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-01-20 - ratio of the product of ion molality b and a correction factor γ to the molality b° of the same ion in a standard solution under standardized conditions: a = bγ / b°. + + + + Mechanical separation of workpieces without the formation of shapeless material, i.e. also without chips (chipless). + Cutting + Schneiden + Cutting - - - - - ActivityOfSolute - RelativeActivityOfSolute - ActivityOfSolute - https://www.wikidata.org/wiki/Q89408862 - 9-24 + + + + A manufacturing process in which the shape of a workpiece is changed by breaking the material cohesion at the processing point and thus the material cohesion is reduced overall. + SeparateManufacturing + DIN 8580:2020 + CuttingManufacturing + Trennen + SeparateManufacturing + A manufacturing process in which the shape of a workpiece is changed by breaking the material cohesion at the processing point and thus the material cohesion is reduced overall. - - - + + + - RedTopAntiQuark - RedTopAntiQuark + The class of individuals that stand for muon elementary particles belonging to the second generation of leptons. + Muon + Muon + The class of individuals that stand for muon elementary particles belonging to the second generation of leptons. + https://en.wikipedia.org/wiki/Muon - - - - - - - - - - - - - - - - - - - - - - ClassicallyDefinedMaterial - ClassicallyDefinedMaterial + + + + Auger electron spectroscopy (AES or simply Auger) is a surface analysis technique that uses an electron beam to excite electrons on atoms in the particle. Atoms that are excited by the electron beam can emit “Auger” electrons. AES measures the kinetic energies of the emitted electrons. The energy of the emitted electrons is characteristic of elements present at the surface and near the surface of a sample. + + ScanningAugerElectronMicroscopy + AES + ScanningAugerElectronMicroscopy + Auger electron spectroscopy (AES or simply Auger) is a surface analysis technique that uses an electron beam to excite electrons on atoms in the particle. Atoms that are excited by the electron beam can emit “Auger” electrons. AES measures the kinetic energies of the emitted electrons. The energy of the emitted electrons is characteristic of elements present at the surface and near the surface of a sample. - + + - - + - Reciprocal of the thermal resistance. - ThermalConductance - ThermalConductance - https://qudt.org/vocab/quantitykind/ThermalConductance - https://www.wikidata.org/wiki/Q17176562 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-46 - 5-13 - Reciprocal of the thermal resistance. - https://doi.org/10.1351/goldbook.T06298 + Scalar line integral of the magnetic field strength along a closed path. + MagnetomotiveForce + MagnetomotiveForce + https://qudt.org/vocab/quantitykind/MagnetomotiveForce + https://www.wikidata.org/wiki/Q1266982 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-60 + 6-37.3 + Scalar line integral of the magnetic field strength along a closed path. + + + + + + + + + + + + + + + + + The class of entities that have no spatial structure. + The concept is based on the common usage of the word "particle", that is used to identify both a specific state of an elementary particle (a quantum) and both the chain of quantums that expresses the evolution of the particle in time. + The union of Elementary and Quantum classes. + CausalParticle + CausalParticle + The concept is based on the common usage of the word "particle", that is used to identify both a specific state of an elementary particle (a quantum) and both the chain of quantums that expresses the evolution of the particle in time. + The union of Elementary and Quantum classes. + The class of entities that have no spatial structure. + + + + + + + A type of sol in the form of one solid dispersed in liquid. + LiquidSol + LiquidSol + A type of sol in the form of one solid dispersed in liquid. + + + + + + A colloid in which small particles (1 nm to 100 nm) are suspended in a continuum phase. + Sol + Sol + A colloid in which small particles (1 nm to 100 nm) are suspended in a continuum phase. + + + + + + + + A liquid is a nearly incompressible fluid that conforms to the shape of its container but retains a (nearly) constant volume independent of pressure. + Liquid + Liquid + A liquid is a nearly incompressible fluid that conforms to the shape of its container but retains a (nearly) constant volume independent of pressure. - - - - - - - - - - - + + + - Strength of a magnetic field. Commonly denoted H. - MagneticFieldStrength - MagnetizingFieldStrength - MagneticFieldStrength - http://qudt.org/vocab/quantitykind/MagneticFieldStrength - https://www.wikidata.org/wiki/Q28123 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-56 - 6-25 - https://doi.org/10.1351/goldbook.M03683 + Inverse of the radius of curvature. + Curvature + Curvature + https://qudt.org/vocab/quantitykind/CurvatureFromRadius + https://www.wikidata.org/wiki/Q214881 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-01-31 + https://dbpedia.org/page/Curvature + 3-2 + Inverse of the radius of curvature. - - - - - - - - - - - - - Mass per length. - LinearMassDensity - LinearDensity - LineicMass - LinearMassDensity - https://qudt.org/vocab/quantitykind/LinearDensity - https://www.wikidata.org/wiki/Q56298294 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-11 - 4-6 - Mass per length. + + + + Ion chromatography (or ion-exchange chromatography) is a form of chromatography that separates ions and ionizable polar molecules based on their affinity to the ion exchanger. + + IonChromatography + IonChromatography + Ion chromatography (or ion-exchange chromatography) is a form of chromatography that separates ions and ionizable polar molecules based on their affinity to the ion exchanger. + https://en.wikipedia.org/wiki/Ion_chromatography - - - - In non-relativistic physics, the centre of mass doesn’t depend on the chosen reference frame. - The unique point where the weighted relative position of the distributed mass of an Item sums to zero. Equivalently, it is the point where if a force is applied to the Item, causes the Item to move in direction of force without rotation. - CentreOfMass - CentreOfMass - The unique point where the weighted relative position of the distributed mass of an Item sums to zero. Equivalently, it is the point where if a force is applied to the Item, causes the Item to move in direction of force without rotation. - https://en.wikipedia.org/wiki/Center_of_mass + + + + In chemical analysis, chromatography is a laboratory technique for the separation of a mixture into its components. + Chromatography + Chromatography + In chemical analysis, chromatography is a laboratory technique for the separation of a mixture into its components. + https://en.wikipedia.org/wiki/Chromatography - - - - + + + + + + + + + + + - - + + + + + + - - In the usual geometrical three-dimensional space, position vectors are quantities of the dimension length. + + A symbol that stands for a concept in the language of the meterological domain of ISO 80000. + MetrologicalSymbol + MetrologicalSymbol + A symbol that stands for a concept in the language of the meterological domain of ISO 80000. + --- IEC - Position vectors are so-called bounded vectors, i.e. their magnitude and direction depend on the particular coordinate system used. + + + + A language entity used in the metrology discipline. + Metrology is the science of measurement and its application and includes all theoretical and practical aspects of measurement, whatever the measurement uncertainty and field of application (VIM3 2.2) + Metrological + Metrological + A language entity used in the metrology discipline. + Metrology is the science of measurement and its application and includes all theoretical and practical aspects of measurement, whatever the measurement uncertainty and field of application (VIM3 2.2) + --- ISO 80000-3 - Vector r characterizing a point P in a point space with a given origin point O. - PositionVector - Position - PositionVector - http://qudt.org/vocab/quantitykind/PositionVector - Vector r characterizing a point P in a point space with a given origin point O. + + + + Subclasses of 'Symbol' are alphabets, in formal languages terminology. A 'Symbol' is atomic for that alphabet, i.e. it has no parts that are symbols for the same alphabet. +e.g. a math symbol is not made of other math symbols +A Symbol may be a String in another language. +e.g. "Bq" is the symbol for Becquerel units when dealing with metrology, or a string of "B" and "q" symbols when dealing with characters. + The class of individuals that stand for an elementary mark of a specific symbolic code (alphabet). + Symbol + AlphabeticEntity + Symbol + The class of individuals that stand for an elementary mark of a specific symbolic code (alphabet). + The class of letter "A" is the symbol as idea and the letter A that you see on the screen is the mark that can be represented by an individual belonging to "A". + Subclasses of 'Symbol' are alphabets, in formal languages terminology. A 'Symbol' is atomic for that alphabet, i.e. it has no parts that are symbols for the same alphabet. +e.g. a math symbol is not made of other math symbols +A Symbol may be a String in another language. +e.g. "Bq" is the symbol for Becquerel units when dealing with metrology, or a string of "B" and "q" symbols when dealing with characters. + Symbols of a formal language need not be symbols of anything. For instance there are logical constants which do not refer to any idea, but rather serve as a form of punctuation in the language (e.g. parentheses). + +Symbols of a formal language must be capable of being specified without any reference to any interpretation of them. +(Wikipedia) + The class is the idea of the symbol, while the individual of that class stands for a specific mark (or token) of that idea. - - - - electrochemical method that measures the voltage response of an electrochemical cell under galvanostatic conditions to short interruptions in the current - - ICI - IntermittentCurrentInterruptionMethod - ICI - electrochemical method that measures the voltage response of an electrochemical cell under galvanostatic conditions to short interruptions in the current + + + + Distance is the norm of Displacement. + Shortest path length between two points in a metric space. + Distance + Distance + https://qudt.org/vocab/quantitykind/Distance + https://www.wikidata.org/wiki/Q126017 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=102-03-24 + https://dbpedia.org/page/Distance + 3-1.8 + Shortest path length between two points in a metric space. + https://en.wikipedia.org/wiki/Distance - - - - Transmission electron microscopy (TEM) is a microscopy technique in which a beam of electrons is transmitted through a specimen to form an image. The specimen is most often an ultrathin section less than 100 nm thick or a suspension on a grid. An image is formed from the interaction of the electrons with the sample as the beam is transmitted through the specimen. The image is then magnified and focused onto an imaging device, such as a fluorescent screen, a layer of photographic film, or a sensor such as a scintillator attached to a charge-coupled device. - - TransmissionElectronMicroscopy - TEM - TransmissionElectronMicroscopy - Transmission electron microscopy (TEM) is a microscopy technique in which a beam of electrons is transmitted through a specimen to form an image. The specimen is most often an ultrathin section less than 100 nm thick or a suspension on a grid. An image is formed from the interaction of the electrons with the sample as the beam is transmitted through the specimen. The image is then magnified and focused onto an imaging device, such as a fluorescent screen, a layer of photographic film, or a sensor such as a scintillator attached to a charge-coupled device. + + + + + Quotient of the mass of water vapour in moist gas by the total gas volume. + The mass concentration of water at saturation is denoted vsat. + MassConcentrationOfWaterVapour + MassConcentrationOfWaterVapour + https://qudt.org/vocab/quantitykind/MassConcentrationOfWaterVapour + https://www.wikidata.org/wiki/Q76378808 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-60 + Quotient of the mass of water vapour in moist gas by the total gas volume. - - - + + + - constituent of the interaction energy between the spins of adjacent electrons in matter arising from the overlap of electron state functions - ExchangeIntegral - ExchangeIntegral - https://qudt.org/vocab/quantitykind/ExchangeIntegral - https://www.wikidata.org/wiki/Q10882959 - 12-34 - constituent of the interaction energy between the spins of adjacent electrons in matter arising from the overlap of electron state functions + Mass of a constituent divided by the volume of the mixture. + MassConcentration + MassConcentration + http://qudt.org/vocab/quantitykind/MassConcentration + https://doi.org/10.1351/goldbook.M03713 - - - - No loss or adds of parts by the components, nor merging. In assemblying parts are losing some of theirs movement degrees of freedom. - The act of connecting together the parts of something - Assemblying - Assemblying - The act of connecting together the parts of something - No loss or adds of parts by the components, nor merging. In assemblying parts are losing some of theirs movement degrees of freedom. + + + + + + + + + + + + Either a proton or a neutron. + Nucleon + Nucleon + Either a proton or a neutron. + https://en.wikipedia.org/wiki/Nucleon - - - - Application of additive manufacturing intended for reducing the time needed for producing prototypes. - RapidPrototyping - RapidPrototyping - Application of additive manufacturing intended for reducing the time needed for producing prototypes. + + + + A scientific theory that focuses on a specific phenomena, for which a single statement (not necessariliy in mathematical form) can be expressed. + NaturalLaw + NaturalLaw + A scientific theory that focuses on a specific phenomena, for which a single statement (not necessariliy in mathematical form) can be expressed. - + + + + + + A scientific theory is a description, objective and observed, produced with scientific methodology. + ScientificTheory + ScientificTheory + A scientific theory is a description, objective and observed, produced with scientific methodology. + + + + - - + - Scalar quantity equal to the line integral of the magnetic field strength H along a specified path linking two points a and b. - MagneticTension - MagneticTension - https://qudt.org/vocab/quantitykind/MagneticTension - https://www.wikidata.org/wiki/Q77993836 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-57 - 6-37.2 - Scalar quantity equal to the line integral of the magnetic field strength H along a specified path linking two points a and b. + vector quantity giving the rate of change of angular velocity + AngularAcceleration + AngularAcceleration + https://qudt.org/vocab/quantitykind/AngularAcceleration + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-01-46 + https://dbpedia.org/page/Angular_acceleration + 3-13 + vector quantity giving the rate of change of angular velocity + https://en.wikipedia.org/wiki/Angular_acceleration - + - T-3 L0 M+1 I0 Θ-4 N0 J0 + T-2 L+2 M0 I0 Θ0 N0 J0 - MassPerCubicTimeQuarticTemperatureUnit - MassPerCubicTimeQuarticTemperatureUnit + AbsorbedDoseUnit + AbsorbedDoseUnit - - - - Data that occurs naturally without an encoding agent producing it. - This is a really broad class that gathers all physical phenomena in which a variation occurs naturally. - NonEncodedData - EnvironmentalData - NonEncodedData - Data that occurs naturally without an encoding agent producing it. - A cloud in the sky. The radiative spectrum of a star. - This is a really broad class that gathers all physical phenomena in which a variation occurs naturally. + + + + + T-1 L+1 M0 I0 Θ+1 N0 J0 + + + + + TemperatureLengthPerTimeUnit + TemperatureLengthPerTimeUnit - + - - - - A hypothesis is a theory, estimated and objective, since its estimated premises are objective. - Hypothesis - Hypothesis - A hypothesis is a theory, estimated and objective, since its estimated premises are objective. + + + + + + + + + A measurement result generally contains “relevant information” about the set of measured quantity properties, such that some may be more representative of the measured quantity than others. This may be expressed in the form of a probability density function (pdf). + Result of a measurement. + +A set of quantites being attributed to a measurand (measured quantitative property) together with any other available relevant information, like measurement uncertainty. + +-- VIM + MeasurementResult + MeasurementResult + Result of a measurement. + +A set of quantites being attributed to a measurand (measured quantitative property) together with any other available relevant information, like measurement uncertainty. + +-- VIM + measurement result + A measurement result generally contains “relevant information” about the set of measured quantity properties, such that some may be more representative of the measured quantity than others. This may be expressed in the form of a probability density function (pdf). + A measurement result has the measured quantity, measurement uncertainty and other relevant attributes as holistic parts. @@ -11070,557 +9647,560 @@ This class refers to what is commonly known as physical property, i.e. a measura A coded conventional that is determined by each interpeter following a well defined determination procedure through a specific perception channel. - - - + + + + + + + 2 + + + + A collection is the concept that complements the item concept, being an entity that possesses at least one part non directly causally connected with the rest. +A collection can be partitioned in maximally connected items called members. The members are self-connected entities and there is no direct causality relation between them. +The combination of collection and item concepts is the EMMO mereocausality alternative to set theory. However, two items can be members only if they are non direct causally connected, giving some constraints to a collection definition. For example, two entities which are directly connected cannot be two distinct members, while their interiors (i.e. the entities obtained by removing the layer of parts that provides the causal contact between them) can be. + The class of not direct causally self-connected world entities. + Collection + Collection + A collection is the concept that complements the item concept, being an entity that possesses at least one part non directly causally connected with the rest. +A collection can be partitioned in maximally connected items called members. The members are self-connected entities and there is no direct causality relation between them. +The combination of collection and item concepts is the EMMO mereocausality alternative to set theory. However, two items can be members only if they are non direct causally connected, giving some constraints to a collection definition. For example, two entities which are directly connected cannot be two distinct members, while their interiors (i.e. the entities obtained by removing the layer of parts that provides the causal contact between them) can be. + The class of not direct causally self-connected world entities. + The collection of users of a particular software, the collection of atoms that have been part of that just dissociated molecule. + + + + + + + + + + + + + - Vector whose scalar products with all fundamental lattice vectors are integral multiples of 2pi. - AngularReciprocalLatticeVector - AngularReciprocalLatticeVector - https://qudt.org/vocab/quantitykind/AngularReciprocalLatticeVector - https://www.wikidata.org/wiki/Q105475278 - 12-2.1 - Vector whose scalar products with all fundamental lattice vectors are integral multiples of 2pi. + Reciprocal of the thermal resistance. + ThermalConductance + ThermalConductance + https://qudt.org/vocab/quantitykind/ThermalConductance + https://www.wikidata.org/wiki/Q17176562 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-46 + 5-13 + Reciprocal of the thermal resistance. + https://doi.org/10.1351/goldbook.T06298 - + + + + CeramicMaterial + CeramicMaterial + + + - T-1 L+2 M-1 I0 Θ+1 N0 J0 + T0 L0 M0 I+1 Θ0 N0 J0 - TemperatureAreaPerMassTimeUnit - TemperatureAreaPerMassTimeUnit + ElectricCurrentUnit + ElectricCurrentUnit - - + + + - Vector quantity equal to the product of the magnetization M and the magnetic constant μ0. - MagneticPolarisation - MagneticPolarisation - https://qudt.org/vocab/quantitykind/MagneticPolarization - https://www.wikidata.org/wiki/Q856711 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-54 - 6-29 - Vector quantity equal to the product of the magnetization M and the magnetic constant μ0. + StoichiometricNumberOfSubstance + StoichiometricNumberOfSubstance + https://qudt.org/vocab/quantitykind/StoichiometricNumber + https://www.wikidata.org/wiki/Q95443720 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-01-22 + 9-29 + https://doi.org/10.1351/goldbook.S06025 - - - - - - - - - - - - - - - - - - - - - - An 'interpreter' that perceives another 'entity' (the 'object') through a specific perception mechanism and produces a 'property' (the 'sign') that stands for the result of that particular perception. - Determiner - Determiner - An 'interpreter' that perceives another 'entity' (the 'object') through a specific perception mechanism and produces a 'property' (the 'sign') that stands for the result of that particular perception. + + + + A command language designed to be run by a command-line interpreter, like a Unix shell. + ShellScript + ShellScript + A command language designed to be run by a command-line interpreter, like a Unix shell. + https://en.wikipedia.org/wiki/Shell_script + + + + + + An interpreted computer language for job control in computing. + CommandLanguage + CommandLanguage + An interpreted computer language for job control in computing. + Unix shell. +Batch programming languages. + https://en.wikipedia.org/wiki/Command_language + + + + + + Quotient of the magnetic dipole moment of an atom, and the product of the nuclear spin quantum number and the nuclear magneton. + GFactorOfNucleusOrNuclearParticle + NuclearGFactor + GFactorOfNucleusOrNuclearParticle + https://qudt.org/vocab/quantitykind/GFactorOfNucleus + https://www.wikidata.org/wiki/Q97591250 + 10-14.2 + Quotient of the magnetic dipole moment of an atom, and the product of the nuclear spin quantum number and the nuclear magneton. + + + + + + + Relation between observed magnetic moment of a particle and the related unit of magnetic moment. + GFactor + GFactor + https://www.wikidata.org/wiki/Q1951266 + Relation between observed magnetic moment of a particle and the related unit of magnetic moment. - - - - - Mass of a constituent divided by the total mass of all constituents in the mixture. - MassFraction - MassFraction - http://qudt.org/vocab/quantitykind/MassFraction - 9-11 - https://doi.org/10.1351/goldbook.M03722 + + + + GravitySintering + ISO 3252:2019 Powder metallurgy +loose-powder sintering, gravity sintering: sintering of uncompacted powder + Loose-powderSintering + PressurelessSintering + GravitySintering - - + + - + - - + + + + + + + - Disjointness comes from the fact that standard model elementary particles are entities that possess objectively distinct and singular characters. - The union of all classes categorising elementary particles according to the Standard Model. - StandardModelParticle - ElementaryParticle - StandardModelParticle - The union of all classes categorising elementary particles according to the Standard Model. - Disjointness comes from the fact that standard model elementary particles are entities that possess objectively distinct and singular characters. - Graviton is included, even if it is an hypothetical particle, to enable causality for gravitational interactions. - This class represents only real particles that are the input and output of a Feynman diagram, and hence respect the E²-p²c²=m²c⁴ energy-momentum equality (on the mass shell). -In the EMMO the virtual particles (off the mass shell), the internal propagators of the interaction within a Feynman diagram, are not represented as mereological entities but as object relations (binary predicates). - - - - - - Fabrication of objects through the deposition of a material using a print head, nozzle or another printer technology. - This term is often used in a non-technical context synonymously with additive manufacturing and, in these cases, typically associated with machines used for non-industrial purposes including personal use. - fabrication of objects through the deposition of a material using a print head, nozzle or another printer technology -Note 1 to entry: This term is often used in a non-technical context synonymously with additive manufacturing (3.1.2) and, in these cases, typically associated with machines used for non-industrial purposes including personal use. - 3DPrinting - 3DPrinting - Fabrication of objects through the deposition of a material using a print head, nozzle or another printer technology. - This term is often used in a non-technical context synonymously with additive manufacturing and, in these cases, typically associated with machines used for non-industrial purposes including personal use. - - - - - - - T-6 L+4 M+2 I-2 Θ-2 N0 J0 - - - - - SquareElectricPotentialPerSquareTemperatureUnit - SquareElectricPotentialPerSquareTemperatureUnit + A bosonic elementary particle that mediates interactions among elementary fermions, and thus acts as a force carrier. + All known gauge bosons have a spin of 1 and are hence also vector bosons. + GaugeBoson + GaugeBoson + A bosonic elementary particle that mediates interactions among elementary fermions, and thus acts as a force carrier. + All known gauge bosons have a spin of 1 and are hence also vector bosons. + Gauge bosons can carry any of the four fundamental interactions of nature. + https://en.wikipedia.org/wiki/Gauge_boson - + + - + - - - - - Fundamental translation vector for the crystal lattice. - FundamentalLatticeVector - FundamentalLatticeVector - https://qudt.org/vocab/quantitykind/FundamentalLatticeVector - https://www.wikidata.org/wiki/Q105451063 - 12-1.2 - Fundamental translation vector for the crystal lattice. - - - - - - - T-2 L+2 M0 I0 Θ0 N0 J0 - - - - - AbsorbedDoseUnit - AbsorbedDoseUnit - - - - - - - - - - - - - - - - + - - Device used for making measurements, alone or in conjunction with one or more supplementary -devices -NOTE 1 A measuring instrument that can be used alone for making measurements is a measuring system. -NOTE 2 A measuring instrument is either an indicating measuring instrument or a material measure. - The instrument used for characterising a material, which usually has a probe and a detector as parts. - - CharacterisationMeasurementInstrument - CharacterisationMeasurementInstrument - Device used for making measurements, alone or in conjunction with one or more supplementary -devices -NOTE 1 A measuring instrument that can be used alone for making measurements is a measuring system. -NOTE 2 A measuring instrument is either an indicating measuring instrument or a material measure. - The instrument used for characterising a material, which usually has a probe and a detector as parts. - In nanoindentation is the nanoindenter - Measuring instrument - - - - - - The mass that it seems to have when responding to forces, or the mass that it seems to have when interacting with other identical particles in a thermal distribution. - EffectiveMass - EffectiveMass - https://qudt.org/vocab/quantitykind/EffectiveMass - https://www.wikidata.org/wiki/Q1064434 - 12-30 - The mass that it seems to have when responding to forces, or the mass that it seems to have when interacting with other identical particles in a thermal distribution. - - - - - - A standalone atom that has no net charge. - NeutralAtom - NeutralAtom - A standalone atom that has no net charge. - - - - - - - A quantity that is obtained from a well-defined procedure. - Subclasses of 'ObjectiveProperty' classify objects according to the type semiosis that is used to connect the property to the object (e.g. by measurement, by convention, by modelling). - The word objective does not mean that each observation will provide the same results. It means that the observation followed a well defined procedure. - -This class refers to what is commonly known as physical property, i.e. a measurable property of physical system, whether is quantifiable or not. - ObjectiveProperty - PhysicalProperty - QuantitativeProperty - ObjectiveProperty - A quantity that is obtained from a well-defined procedure. - The word objective does not mean that each observation will provide the same results. It means that the observation followed a well defined procedure. - -This class refers to what is commonly known as physical property, i.e. a measurable property of physical system, whether is quantifiable or not. - - - - - - A tile that has next and is next of other tiles within the same tessellation. - ThroughTile - ThroughTile - A tile that has next and is next of other tiles within the same tessellation. + An electric dipole, vector quantity of magnitude equal to the product of the positive charge and the distance between the charges and directed from the negative charge to the positive charge. + ElectricDipoleMoment + ElectricDipoleMoment + http://qudt.org/vocab/quantitykind/ElectricDipoleMoment + https://www.wikidata.org/wiki/Q735135 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-35 + 6-6 + An electric dipole, vector quantity of magnitude equal to the product of the positive charge and the distance between the charges and directed from the negative charge to the positive charge. + https://doi.org/10.1351/goldbook.E01929 - - - - - - - - - - + - - - + + + + + - - - - https://w3id.org/emmo#EMMO_22c91e99_61f8_4433_8853_432d44a2a46a - SpatioTemporalTile - WellFormedTile - SpatioTemporalTile - - - - - - - + + + - - + + - - Ratio of magnetic dipole moment to total angular momentum. - GyromagneticRatio - GyromagneticCoefficient - MagnetogyricRatio - GyromagneticRatio - https://qudt.org/vocab/quantitykind/GyromagneticRatio - https://www.wikidata.org/wiki/Q634552 - 10-12.1 - Ratio of magnetic dipole moment to total angular momentum. - https://doi.org/10.1351/goldbook.M03693 + + Hadronic subatomic particles composed of an equal number of quarks and antiquarks bound together by strong interactions. + Most mesons are composed of one quark and one antiquark. + Meson + Meson + Hadronic subatomic particles composed of an equal number of quarks and antiquarks bound together by strong interactions. + Most mesons are composed of one quark and one antiquark. + https://en.wikipedia.org/wiki/Meson - - - - Machining with a circular cutting movement, usually associated with a multi-toothed tool, and with a feed movement perpendicular or oblique to the axis of rotation of the tool, to produce any workpiece surface. - Milling - Fräsen - Milling + + + + Matter composed of both matter and antimatter fundamental particles. + HybridMatter + HybridMatter + Matter composed of both matter and antimatter fundamental particles. - - - - Measurement of energy in a thermodynamic system. - Enthalpy - Enthalpy - http://qudt.org/vocab/quantitykind/Enthalpy - 5.20-3 - https://doi.org/10.1351/goldbook.E02141 + + + + Hydrodynamic voltammetry using a a rotating disc electrode, where the limiting current is described by the Levich equation + VoltammetryAtARotatingDiskElectrode + VoltammetryAtARotatingDiskElectrode + Hydrodynamic voltammetry using a a rotating disc electrode, where the limiting current is described by the Levich equation + https://doi.org/10.1515/pac-2018-0109 - - - - Time derivative of the dose equivalent. - DoseEquivalentRate - DoseEquivalentRate - https://www.wikidata.org/wiki/Q99604810 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-14-02 - 10-83.2 - Time derivative of the dose equivalent. + + + + A linear potential scan, at sufficiently slow scan rates so as to ensure a steady state response, is usually applied. + Mass transport of a redox species enhanced by convection in this way results in a greater electric current. Convective mass transfer occurs up to the diffusion-limiting layer, within which the mass transfer is controlled by diffusion. Electroactive substance depletion outside the diffusion layer is annulled by convective mass transfer, which results in steady- state sigmoidal wave-shaped current-potential curves. + The forced flow can be accomplished by movement either of the solution (solution stirring, or channel flow), or of the electrode (electrode rotation or vibration). + voltammetry with forced flow of the solution towards the electrode surface + + HydrodynamicVoltammetry + HydrodynamicVoltammetry + https://www.wikidata.org/wiki/Q17028237 + voltammetry with forced flow of the solution towards the electrode surface + https://en.wikipedia.org/wiki/Hydrodynamic_voltammetry + https://doi.org/10.1515/pac-2018-0109 - - - - - + + + + + + + + + + + + + + + + + + + + A continuum that has no fixed shape and yields easily to external pressure. + Fluid + Fluid + A continuum that has no fixed shape and yields easily to external pressure. + Gas, liquid, plasma, + + + + - - + + - - - Differential quotient of the absorbed dose with respect to time. - AbsorbedDoseRate - AbsorbedDoseRate - https://qudt.org/vocab/quantitykind/AbsorbedDoseRate - https://www.wikidata.org/wiki/Q69428958 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-12-07 - 10-84 - Differential quotient of the absorbed dose with respect to time. - - - - - - Discrete data that are decoded as a sequence of 1/0, or true/false, or on/off. - DigitalData - BinaryData - DigitalData - Discrete data that are decoded as a sequence of 1/0, or true/false, or on/off. + + Minus + Minus - - - - - + + + + + + + + + + - - + + - - translation vector that maps the crystal lattice on itself - LatticeVector - LatticeVector - https://qudt.org/vocab/quantitykind/LatticeVector - https://www.wikidata.org/wiki/Q105435234 - 12-1.1 - translation vector that maps the crystal lattice on itself - - - - - - vector quantity between any two points in space - Displacement - Displacement - https://qudt.org/vocab/quantitykind/Displacement - https://www.wikidata.org/wiki/Q190291 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-01-29 - https://dbpedia.org/page/Displacement_(geometry) - 3-1.11 - vector quantity between any two points in space - https://en.wikipedia.org/wiki/Displacement_(geometry) - - - - - - - - + + - - Quotient of dynamic viscosity and mass density of a fluid. - KinematicViscosity - KinematicViscosity - https://qudt.org/vocab/quantitykind/KinematicViscosity - https://www.wikidata.org/wiki/Q15106259 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-35 - 4-25 - Quotient of dynamic viscosity and mass density of a fluid. - https://doi.org/10.1351/goldbook.K03395 + + A 'Semiosis' that involves an 'Observer' that perceives another 'Physical' (the 'Object') through a specific perception mechanism and produces a 'Property' (the 'Sign') that stands for the result of that particular perception according to a well defined conventional procedure. + Determination + Characterisation + Determination + A 'Semiosis' that involves an 'Observer' that perceives another 'Physical' (the 'Object') through a specific perception mechanism and produces a 'Property' (the 'Sign') that stands for the result of that particular perception according to a well defined conventional procedure. + Assigning the word "red" as sign for an object provides an information to all other interpreters about the outcome of a specific observation procedure according to the determiner. - + - - + + - - - A discrete data whose elements can be decoded as tokens from one or more alphabets, without necessarily respecting syntactic rules. - A symbolic entity is not necessarily graphical (e.g. it doesn't necessarily have the physical shape of a letter), but its elements can be decoded and put in relation with an alphabet. -In other words, a sequence of bit "1000010" in a RAM (a non-graphical entity) is a valid symbol since it can be decoded through ASCII rules as the letter "B". The same holds for an entity standing for the sound of a voice saying: "Hello", since it can be decomposed in discrete parts, each of them being associated to a letter of an alphabet. - Symbolic - Symbolic - A discrete data whose elements can be decoded as tokens from one or more alphabets, without necessarily respecting syntactic rules. - fe780 -emmo -!5*a -cat -for(i=0;i<N;++i) - A symbolic entity is not necessarily graphical (e.g. it doesn't necessarily have the physical shape of a letter), but its elements can be decoded and put in relation with an alphabet. -In other words, a sequence of bit "1000010" in a RAM (a non-graphical entity) is a valid symbol since it can be decoded through ASCII rules as the letter "B". The same holds for an entity standing for the sound of a voice saying: "Hello", since it can be decomposed in discrete parts, each of them being associated to a letter of an alphabet. - A symbolic object possesses a reductionistic oriented structure. -For example, text is made of words, spaces and punctuations. Words are made of characters (i.e. atomic symbols). + + + Structural + Structural + + + + + + + + + + + + + + + A whole that represent the overall lifetime of the world object that represents according to some holistic criteria. + Fundamental + Lifetime + Maximal + Fundamental + A whole that represent the overall lifetime of the world object that represents according to some holistic criteria. + A marathon is an example of class whose individuals are always maximal since the criteria satisfied by a marathon 4D entity poses some constraints on its temporal and spatial extent. + +On the contrary, the class for a generic running process does not necessarily impose maximality to its individuals. A running individual is maximal only when it extends in time for the minimum amount required to identify a running act, so every possible temporal part is always a non-running. + +Following the two examples, a marathon individual is a maximal that can be decomposed into running intervals. The marathon class is a subclass of running. + + + + + + A meson with spin two. + TensorMeson + TensorMeson + A meson with spin two. + + + + + + ISO80000Categorised + ISO80000Categorised + + + + + + + AntiTau + AntiTau - - + + + + Unit for quantities of dimension one that are the fraction of two masses. + MassFractionUnit + MassFractionUnit + Unit for quantities of dimension one that are the fraction of two masses. + Unit for mass fraction. + + + + - - SamplePreparationInstrument - SamplePreparationInstrument + Atom Probe Tomography (APT or 3D Atom Probe) is the only material analysis technique offering extensive capabilities for both 3D imaging and chemical composition measurements at the atomic scale (around 0.1-0.3nm resolution in depth and 0.3-0.5nm laterally). Since its early developments, Atom Probe Tomography has contributed to major advances in materials science. The sample is prepared in the form of a very sharp tip. The cooled tip is biased at high DC voltage (3-15 kV). The very small radius of the tip and the High Voltage induce a very high electrostatic field (tens V/nm) at the tip surface, just below the point of atom evaporation. Under laser or HV pulsing, one or more atoms are evaporated from the surface, by field effect (near 100% ionization), and projected onto a Position Sensitive Detector (PSD) with a very high detection efficiency. Ion efficiencies are as high as 80%, the highest analytical efficiency of any 3D microscopy. + AtomProbeTomography + 3D Atom Probe + APT + AtomProbeTomography + Atom Probe Tomography (APT or 3D Atom Probe) is the only material analysis technique offering extensive capabilities for both 3D imaging and chemical composition measurements at the atomic scale (around 0.1-0.3nm resolution in depth and 0.3-0.5nm laterally). Since its early developments, Atom Probe Tomography has contributed to major advances in materials science. The sample is prepared in the form of a very sharp tip. The cooled tip is biased at high DC voltage (3-15 kV). The very small radius of the tip and the High Voltage induce a very high electrostatic field (tens V/nm) at the tip surface, just below the point of atom evaporation. Under laser or HV pulsing, one or more atoms are evaporated from the surface, by field effect (near 100% ionization), and projected onto a Position Sensitive Detector (PSD) with a very high detection efficiency. Ion efficiencies are as high as 80%, the highest analytical efficiency of any 3D microscopy. - - - - A whole with temporal parts of its same type. - TemporallyRedundant - TemporallyRedundant - A whole with temporal parts of its same type. + + + + Tomography is imaging by sections or sectioning that uses any kind of penetrating wave. The method is used in radiology, archaeology, biology, atmospheric science, geophysics, oceanography, plasma physics, materials science, cosmochemistry, astrophysics, quantum information, and other areas of science. The word tomography is derived from Ancient Greek τόμος tomos, "slice, section" and γράφω graphō, "to write" or, in this context as well, "to describe." A device used in tomography is called a tomograph, while the image produced is a tomogram. + Tomography + Tomography + Tomography is imaging by sections or sectioning that uses any kind of penetrating wave. The method is used in radiology, archaeology, biology, atmospheric science, geophysics, oceanography, plasma physics, materials science, cosmochemistry, astrophysics, quantum information, and other areas of science. The word tomography is derived from Ancient Greek τόμος tomos, "slice, section" and γράφω graphō, "to write" or, in this context as well, "to describe." A device used in tomography is called a tomograph, while the image produced is a tomogram. - + - T+4 L-4 M-2 I0 Θ0 N0 J0 + T-2 L+2 M+1 I-2 Θ0 N0 J0 - ReciprocalSquareEnergyUnit - ReciprocalSquareEnergyUnit + InductanceUnit + InductanceUnit - - - + + + - Natural logarithm of the quotient of a reference energy and the kinetic energy of a neutron. - Lethargy - Lethargy - https://qudt.org/vocab/quantitykind/Lethargy - https://www.wikidata.org/wiki/Q25508781 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-07-01 - 10-69 - Natural logarithm of the quotient of a reference energy and the kinetic energy of a neutron. + Ratio of the mass of water vapour to the mass of dry air in a given volume of air. + The mixing ratio at saturation is denoted xsat. + MixingRatio + MassRatioOfWaterVapourToDryGas + MixingRatio + https://www.wikidata.org/wiki/Q76378940 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-62 + 5-30 + Ratio of the mass of water vapour to the mass of dry air in a given volume of air. - - - - GluonType2 - GluonType2 + + + + + T+3 L0 M-1 I+2 Θ0 N-1 J0 + + + + + AmountConductivityUnit + AmountConductivityUnit - - - - A material is a crystal if it has essentially a sharp diffraction pattern. - -A solid is a crystal if it has essentially a sharp diffraction pattern. The word essentially means that most of the intensity of the diffraction is concentrated in relatively sharp Bragg peaks, besides the always present diffuse scattering. In all cases, the positions of the diffraction peaks can be expressed by - + + + + + + + + + + + + GaugePressure + GaugePressure + https://www.wikidata.org/wiki/Q109594211 + 4-14.2 + -H=∑ni=1hia∗i (n≥3) - Crystal - Crystal - A material is a crystal if it has essentially a sharp diffraction pattern. + + + + A standalone atom that has no net charge. + NeutralAtom + NeutralAtom + A standalone atom that has no net charge. + -A solid is a crystal if it has essentially a sharp diffraction pattern. The word essentially means that most of the intensity of the diffraction is concentrated in relatively sharp Bragg peaks, besides the always present diffuse scattering. In all cases, the positions of the diffraction peaks can be expressed by + + + + + Distance in a superconductor over which the effect of a perturbation is appreciable at zero thermodynamic temperature + CoherenceLength + CoherenceLength + https://www.wikidata.org/wiki/Q1778793 + 12-38.2 + Distance in a superconductor over which the effect of a perturbation is appreciable at zero thermodynamic temperature + + + + + Time derivative of the dose equivalent. + DoseEquivalentRate + DoseEquivalentRate + https://www.wikidata.org/wiki/Q99604810 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-14-02 + 10-83.2 + Time derivative of the dose equivalent. + -H=∑ni=1hia∗i (n≥3) + + + + + + + + + + + + + Mass per amount of substance. + MolarMass + MolarMass + https://qudt.org/vocab/quantitykind/MolarMass + https://www.wikidata.org/wiki/Q145623 + 9-4 + Mass per amount of substance. - - - - - - - - - + - + - + - + - Declaration - ConventionalSemiosis - Declaration + Deduction + IndexSemiosis + Deduction @@ -11654,38 +10234,27 @@ the cat perceived by my mind -> interpretant "Cat!" -> sign, the produced sign - - - + + - + - + - + - + - + - - - - - - - - - - - - + + @@ -11698,263 +10267,350 @@ the cat perceived by my mind -> interpretant - - An heterogeneous mixture that contains coarsly dispersed particles (no Tyndall effect), that generally tend to separate in time to the dispersion medium phase. - Suspensions show no significant effect on light. - Suspension - Suspension - An heterogeneous mixture that contains coarsly dispersed particles (no Tyndall effect), that generally tend to separate in time to the dispersion medium phase. + + BlueQuark + BlueQuark + + + + + + + + + + + + + + + + + A causal structure expresses itself in time and space thanks to the underlying causality relations between its constituent quantum entities. It must at least provide two temporal parts. +The unity criterion beyond the definition of a causal structure (the most general concept of structure) is the existence of an undirected causal path between each of its parts. + A self-connected composition of more than one quantum entities. + The most fundamental unity criterion for the definition of an structure is that: +- is made of at least two quantums (a structure is not a simple entity) +- all quantum parts form a causally connected graph + The union of CausalPath and CausalSystem classes. + CausalStructure + CausalObject + CausalStructure + The most fundamental unity criterion for the definition of an structure is that: +- is made of at least two quantums (a structure is not a simple entity) +- all quantum parts form a causally connected graph + The union of CausalPath and CausalSystem classes. + A self-connected composition of more than one quantum entities. + A causal structure expresses itself in time and space thanks to the underlying causality relations between its constituent quantum entities. It must at least provide two temporal parts. +The unity criterion beyond the definition of a causal structure (the most general concept of structure) is the existence of an undirected causal path between each of its parts. - - - - - - - - - - - - - - + + - ParticleConcentration - ParticleConcentration - https://www.wikidata.org/wiki/Q39078574 - 9-9.1 + Width of the forbidden energy band in a superconductor. + SuperconductorEnergyGap + SuperconductorEnergyGap + https://qudt.org/vocab/quantitykind/SuperconductorEnergyGap + https://www.wikidata.org/wiki/Q106127898 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=815-10-28 + 12-37 + Width of the forbidden energy band in a superconductor. - - - - - - - - - - - + + + - Number of molecules of a substance in a mixture per volume. - MolecularConcentration - MolecularConcentration - https://qudt.org/vocab/quantitykind/MolecularConcentration - https://www.wikidata.org/wiki/Q88865973 - 9-9.2 - Number of molecules of a substance in a mixture per volume. + Smallest energy difference between the lowest level of conduction band and the highest level of valence band at zero thermodynamic temperature. + GapEnergy + BandgapEnergy + GapEnergy + https://www.wikidata.org/wiki/Q103982939 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-06-16 + 12-27.2 + Smallest energy difference between the lowest level of conduction band and the highest level of valence band at zero thermodynamic temperature. + https://doi.org/10.1351/goldbook.B00593 - - + + + + Forming of a solid body, whereby the plastic state is essentially brought about by uniaxial or multiaxial compressive stress. + lasciano tensioni residue di compressione + CompressiveForming + Druckumformen + CompressiveForming + + + + + + The class of general mathematical symbolic objects respecting mathematical syntactic rules. + A mathematical object in this branch is not representing a concept but an actual graphical object built using mathematcal symbols arranged in some way, according to math conventions. + Mathematical + Mathematical + The class of general mathematical symbolic objects respecting mathematical syntactic rules. + + + + + - Count per volume. - VolumetricNumberDensity - VolumetricNumberDensity - Count per volume. + The charge of an electron. + The negative of ElementaryCharge. + ElectronCharge + ElectronCharge + The charge of an electron. + https://doi.org/10.1351/goldbook.E01982 - + + + + Impedimetric sensors are based on measurement of a concentration-dependent parameter taken from analysis of the respective electrochemical impedance spectra, or from the impedance magnitudes at a chosen fixed frequency. + The sinusoidal current response lags behind the sinusoidal voltage perturbation by a phase angle φ. Resistances (e.g. to charge transfer) give a response in phase with the voltage perturbation; capacitances (e.g. double layer) give a response 90° out of phase; combinations of resistances and capacitances give phase angles between 0 and 90°. Plots of the out of phase vs. the in phase component of the impedance for all the frequencies tested are called complex plane (or Nyquist) plots. Plots of the phase angle and the magnitude of the impedance vs. the logarithm of perturbation frequency are called Bode diagrams. Complex plane plots are the more commonly used for electrochemical sensors. + electrochemical measurement method of the complex impedance of an electrochemical system as a function of the frequency of a small amplitude (normally 5 to 10 mV) sinusoidal voltage perturbation superimposed on a fixed value of applied potential or on the open circuit potential + + ElectrochemicalImpedanceSpectroscopy + EIS + ElectrochemicalImpedanceSpectroscopy + https://www.wikidata.org/wiki/Q3492904 + electrochemical measurement method of the complex impedance of an electrochemical system as a function of the frequency of a small amplitude (normally 5 to 10 mV) sinusoidal voltage perturbation superimposed on a fixed value of applied potential or on the open circuit potential + https://doi.org/10.1515/pac-2018-0109 + + + - + - + - Mean number of particles per volume. - ParticleNumberDensity - ParticleNumberDensity - https://qudt.org/vocab/quantitykind/ParticleNumberDensity - https://www.wikidata.org/wiki/Q98601569 - 10-62.1 - Mean number of particles per volume. - https://doi.org/10.1351/goldbook.N04262 + Often denoted B. + Strength of the magnetic field. + MagneticFluxDensity + MagneticInduction + MagneticFluxDensity + http://qudt.org/vocab/quantitykind/MagneticFluxDensity + https://www.wikidata.org/wiki/Q30204 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-19 + 6-21 + Strength of the magnetic field. + https://doi.org/10.1351/goldbook.M03686 - - - - - + + - - + + - - - RelativePressureCoefficient - RelativePressureCoefficient - https://qudt.org/vocab/quantitykind/RelativePressureCoefficient - https://www.wikidata.org/wiki/Q74761852 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-30 - 5-3.3 + + + + + + + + + + + + + + Sample preparation processes (e.g., machining, polishing, cutting to size, etc.) before actual observation and measurement. + + SamplePreparation + SamplePreparation + Sample preparation processes (e.g., machining, polishing, cutting to size, etc.) before actual observation and measurement. - + + + + An object which supports the specimen in the correct position for the characterisation process. + + Holder + Holder + An object which supports the specimen in the correct position for the characterisation process. + + + + - + - Change of pressure per change of temperature at constant volume. - PressureCoefficient - PressureCoefficient - https://qudt.org/vocab/quantitykind/PressureCoefficient - https://www.wikidata.org/wiki/Q74762732 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-29 - 5-4 - Change of pressure per change of temperature at constant volume. - - - - - - Any constitutionally or isotopically distinct atom, molecule, ion, ion pair, radical, radical ion, complex, conformer etc., identifiable as a separately distinguishable entity that can undergo a chemical reaction. - Molecular entity is used as a general term for singular entities, irrespective of their nature, while chemical species stands for sets or ensembles of molecular entities. -Note that the name of a compound may refer to the respective molecular entity or to the chemical species, - https://goldbook.iupac.org/terms/view/M03986 - MolecularEntity - ChemicalEntity - MolecularEntity - Any constitutionally or isotopically distinct atom, molecule, ion, ion pair, radical, radical ion, complex, conformer etc., identifiable as a separately distinguishable entity that can undergo a chemical reaction. - Hydrogen molecule is an adequate definition of a certain molecular entity for some purposes, whereas for others it is necessary to distinguish the electronic state and/or vibrational state and/or nuclear spin, etc. of the hydrogen molecule. - Methane, may mean a single molecule of CH4 (molecular entity) or a molar amount, specified or not (chemical species), participating in a reaction. The degree of precision necessary to describe a molecular entity depends on the context. - Molecular entity is used as a general term for singular entities, irrespective of their nature, while chemical species stands for sets or ensembles of molecular entities. -Note that the name of a compound may refer to the respective molecular entity or to the chemical species, - This concept is strictly related to chemistry. For this reason an atom can be considered the smallest entity that can be considered "molecular", including nucleus when they are seen as ions (e.g. H⁺, He⁺⁺). - - - - - - - BlueStrangeQuark - BlueStrangeQuark - - - - - - ThermochemicalTreatment - ThermochemicalTreatment + Heat capacity divided by mass. + SpecificHeatCapacity + SpecificHeatCapacity + https://qudt.org/vocab/quantitykind/SpecificHeatCapacity + https://www.wikidata.org/wiki/Q487756 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-48 + https://dbpedia.org/page/Specific_heat_capacity + 5-16.1 + Heat capacity divided by mass. + https://en.wikipedia.org/wiki/Specific_heat_capacity + https://doi.org/10.1351/goldbook.S05800 - - - - Heat to a temperature appropriate for the particular material, maintain at that temperature and then cool at an appropriate rate to reduce hardness, improve machinability or achieve desired properties. - HeatTreatment - wärmebehandeln - HeatTreatment - Heat to a temperature appropriate for the particular material, maintain at that temperature and then cool at an appropriate rate to reduce hardness, improve machinability or achieve desired properties. + + + + + T+1 L0 M0 I+1 Θ0 N0 J0 + + + + + ElectricChargeUnit + ElectricChargeUnit - - + + - Mechanical separation of workpieces without the formation of shapeless material, i.e. also without chips (chipless). - Cutting - Schneiden - Cutting + A system whose is mainly characterised by the way in which elements are interconnected. + Network + Network + A system whose is mainly characterised by the way in which elements are interconnected. - - + + - Voltage between the two terminals of a voltage source when there is no electric current through the source. - SourceVoltage - SourceTension - SourceVoltage - https://qudt.org/vocab/quantitykind/SourceVoltage - https://www.wikidata.org/wiki/Q185329 - 6-36 - Voltage between the two terminals of a voltage source when there is no electric current through the source. + StandardAbsoluteActivityOfSolvent + StandardAbsoluteActivityOfSolvent + https://www.wikidata.org/wiki/Q89556185 + 9-27.3 - - - - Deals with entities that have a undefined shape. Undefined means that the actual shape of the entity that is produced is not relevant for the definition of the process. -In fact, everything has a shape, but in process engineering this is not relevant. - -e.g. the fact that steel comes in sheets is not relevant for the definition of steel material generated in a steel-making process. - ProcessEngineeringProcess - ProcessEngineeringProcess - Deals with entities that have a undefined shape. Undefined means that the actual shape of the entity that is produced is not relevant for the definition of the process. -In fact, everything has a shape, but in process engineering this is not relevant. - -e.g. the fact that steel comes in sheets is not relevant for the definition of steel material generated in a steel-making process. - https://de.wikipedia.org/wiki/Verfahrenstechnik + + + + + T-1 L0 M0 I0 Θ0 N+1 J0 + + + + + CatalyticActivityUnit + CatalyticActivityUnit - - - - - A soft, solid or solid-like colloid consisting of two or more components, one of which is a liquid, present in substantial quantity. - Gel - Gel - A soft, solid or solid-like colloid consisting of two or more components, one of which is a liquid, present in substantial quantity. + + + + PolymericMaterial + PolymericMaterial - - - - Gathering - Gathering + + + + + + + + + + + + + + + + + + + + + + ClassicallyDefinedMaterial + ClassicallyDefinedMaterial - - + + + - - + + - - A well formed tessellation with at least a junction tile. - MixedTiling - MixedTiling - A well formed tessellation with at least a junction tile. + + Characterisation can either be made in air (ambient conditions, without specific controls on environmental parameters), or at different temperatures, different pressures (or in vacuum), or using different types of working gases (inert or reactive with respect to sample), different levels of humidity, etc. + Medium of the characterisation experiment defined by the set of environmental conditions that are controlled and measured over time during the experiment. + CharacterisationEnvironment + CharacterisationEnvironment + Medium of the characterisation experiment defined by the set of environmental conditions that are controlled and measured over time during the experiment. + Characterisation can either be made in air (ambient conditions, without specific controls on environmental parameters), or at different temperatures, different pressures (or in vacuum), or using different types of working gases (inert or reactive with respect to sample), different levels of humidity, etc. - - - - - GreenDownQuark - GreenDownQuark + + + + + + The abstract notion of angle. + AngularMeasure + AngularMeasure + https://qudt.org/vocab/quantitykind/Angle + https://www.wikidata.org/wiki/Q1357788 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=102-04-14 + 3-5 + The abstract notion of angle. + https://doi.org/10.1351/goldbook.A00346 - - - + + + + + + + + + + + + + Absolute value of the magnetic moment of a nucleus. + NuclearMagneton + NuclearMagneton + https://www.wikidata.org/wiki/Q1166093 + 10-9.3 + Absolute value of the magnetic moment of a nucleus. + https://doi.org/10.1351/goldbook.N04236 + + + + - + - + - + @@ -11962,1048 +10618,906 @@ e.g. the fact that steel comes in sheets is not relevant for the definition of s - - DownQuark - DownQuark - https://en.wikipedia.org/wiki/Down_quark - - - - - + - - - - - - - - - - - - - - - - - - - - - - + + - GreenQuark - GreenQuark - - - - - - - angular wavenumber of electrons in states on the Fermi sphere - FermiAnglularWaveNumber - FermiAnglularRepetency - FermiAnglularWaveNumber - https://qudt.org/vocab/quantitykind/FermiAngularWavenumber - https://www.wikidata.org/wiki/Q105554303 - 12-9.2 - angular wavenumber of electrons in states on the Fermi sphere - - - - - - - Magnitude of the wave vector. - AngularWavenumber - AngularRepetency - AngularWavenumber - https://qudt.org/vocab/quantitykind/AngularWavenumber - https://www.wikidata.org/wiki/Q30338487 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-10-12 - 3-22 - Magnitude of the wave vector. + AntiQuark + AntiQuark - - - - A group of machineries used to process a group of similar parts. - Is not simply a collection of machineries, since the connection between them is due to the parallel flow of processed parts that comes from a unique source and ends into a common repository. - MachineCell - MachineCell - A group of machineries used to process a group of similar parts. + + + + + + + + + + + + + + + FundamentalAntiMatterParticle + FundamentalAntiMatterParticle - - + + - A system arranged to setup a specific manufacturing process. - ManufacturingSystem - ManufacturingSystem - A system arranged to setup a specific manufacturing process. + GrowingCrystal + GrowingCrystal - - - + + - Distance a magnetic field penetrates the plane surface of a semi-finite superconductor. - LondonPenetrationDepth - LondonPenetrationDepth - https://qudt.org/vocab/quantitykind/LondonPenetrationDepth - https://www.wikidata.org/wiki/Q3277853 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=815-10-33 - 12-38.1 - Distance a magnetic field penetrates the plane surface of a semi-finite superconductor. + Heat is energy in transfer to or from a thermodynamic system, by mechanisms other than thermodynamic work or transfer of matter. + Heat + AmountOfHeat + Heat + http://qudt.org/vocab/quantitykind/Heat + 5-6.1 + https://doi.org/10.1351/goldbook.H02752 - - - - - + + - - + + + + + + + + - - Partial differential quotient of the cross section of a process with respect to the solid angle around a given direction and the energy of a particle scattered in that direction. - DirectionAndEnergyDistributionOfCrossSection - DirectionAndEnergyDistributionOfCrossSection - https://qudt.org/vocab/quantitykind/SpectralAngularCrossSection - https://www.wikidata.org/wiki/Q98269571 - 10-41 - Partial differential quotient of the cross section of a process with respect to the solid angle around a given direction and the energy of a particle scattered in that direction. - - - - - - - An object which is an holistic spatial part of a object. - Constituent - ObjectPart - Constituent - An object which is an holistic spatial part of a object. - A tire is a constituent of a car. - - - - - - + - + + + An atom_based state defined by an exact number of e-bonded atomic species and an electron cloud made of the shared electrons. + An entity is called essential if removing one direct part will lead to a change in entity class. +An entity is called redundand if removing one direct part will not lead to a change in entity class. + Molecule + ChemicalSubstance + Molecule + An atom_based state defined by an exact number of e-bonded atomic species and an electron cloud made of the shared electrons. + H₂0, C₆H₁₂O₆, CH₄ + An entity is called essential if removing one direct part will lead to a change in entity class. +An entity is called redundand if removing one direct part will not lead to a change in entity class. + This definition states that this object is a non-periodic set of atoms or a set with a finite periodicity. +Removing an atom from the state will result in another type of atom_based state. +e.g. you cannot remove H from H₂0 without changing the molecule type (essential). However, you can remove a C from a nanotube (redundant). C60 fullerene is a molecule, since it has a finite periodicity and is made of a well defined number of atoms (essential). A C nanotube is not a molecule, since it has an infinite periodicity (redundant). + + + + - + - + - - "Real scalar quantity, defined and adopted by convention, with which any other quantity of the same kind can be compared to express the ratio of the second quantity to the first one as a number" -ISO 80000-1 - A metrological reference for a physical quantity. - MeasurementUnit - MeasurementUnit - A metrological reference for a physical quantity. - kg -m/s -km - measurement unit (VIM3 1.9) - "Real scalar quantity, defined and adopted by convention, with which any other quantity of the same kind can be compared to express the ratio of the second quantity to the first one as a number" -ISO 80000-1 - "Unit symbols are mathematical entities and not abbreviations." - -"Symbols for units are treated as mathematical entities. In expressing the value of a quantity as the product of a numerical value and a unit, both the numerical value and the unit may be treated by the ordinary rules of algebra." + + Disjointness comes from the fact that standard model elementary particles are entities that possess objectively distinct and singular characters. + The union of all classes categorising elementary particles according to the Standard Model. + StandardModelParticle + ElementaryParticle + StandardModelParticle + The union of all classes categorising elementary particles according to the Standard Model. + Disjointness comes from the fact that standard model elementary particles are entities that possess objectively distinct and singular characters. + Graviton is included, even if it is an hypothetical particle, to enable causality for gravitational interactions. + This class represents only real particles that are the input and output of a Feynman diagram, and hence respect the E²-p²c²=m²c⁴ energy-momentum equality (on the mass shell). +In the EMMO the virtual particles (off the mass shell), the internal propagators of the interaction within a Feynman diagram, are not represented as mereological entities but as object relations (binary predicates). + -https://www.bipm.org/utils/common/pdf/si-brochure/SI-Brochure-9-EN.pdf - Measurement units and procedure units are disjoint. - Quantitative value are expressed as a multiple of the 'MeasurementUnit'. + + + + + A quantum is the EMMO mereological atomistic and causal reductionistic entity. To avoid confusion with the concept of atom coming from physics and to underline the causal reductionistic approach, we will use the expression quantum mereology, instead of atomistic mereology. + A quantum is the most fundamental item (both mereologically and causally) and is considered causally self-connected by definition. +The quantum concept recalls the fact that there is lower epistemological limit to our knowledge of the universe, related to the uncertainity principle. +Space and time emerge following the network of causal connections between quantum objects. So quantum objects are adimensional objects, that precede space and time dimensions: they are simple beings (in greek οντα). +Using physics concepts, we can think the quantum as an elementary particle (e.g. an electron) in a specific state between two causal interactions. + The class of entities without proper parts. + The class of the mereological and causal fundamental entities. + Quantum + Quantum + A quantum is the most fundamental item (both mereologically and causally) and is considered causally self-connected by definition. +The quantum concept recalls the fact that there is lower epistemological limit to our knowledge of the universe, related to the uncertainity principle. +Space and time emerge following the network of causal connections between quantum objects. So quantum objects are adimensional objects, that precede space and time dimensions: they are simple beings (in greek οντα). +Using physics concepts, we can think the quantum as an elementary particle (e.g. an electron) in a specific state between two causal interactions. + The class of entities without proper parts. + The class of the mereological and causal fundamental entities. + From a physics perspective a quantum can be related to smallest identifiable entities, according to the limits imposed by the uncertainty principle in space and time measurements. +However, the quantum mereotopology approach is not restricted only to physics. For example, in a manpower management ontology, a quantum can stand for an hour (time) of a worker (space) activity. + A quantum is the EMMO mereological atomistic and causal reductionistic entity. To avoid confusion with the concept of atom coming from physics and to underline the causal reductionistic approach, we will use the expression quantum mereology, instead of atomistic mereology. - - + + + + + + + + + + + - The corresponding Celsius temperature is denoted td and is also called dew point. - Thermodynamic temperature at which vapour in air reaches saturation. - DewPointTemperature - DewPointTemperature - https://www.wikidata.org/wiki/Q178828 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-67 - 5-36 - Thermodynamic temperature at which vapour in air reaches saturation. - https://doi.org/10.1351/goldbook.D01652 + Absolute value of the electric charge of ions produced in dry air by X- or gamma radiation per mass of air. + Exposure + Exposure + https://qudt.org/vocab/quantitykind/Exposure + https://www.wikidata.org/wiki/Q336938 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-32 + 10-88 + Absolute value of the electric charge of ions produced in dry air by X- or gamma radiation per mass of air. - - - - The laboratory where the whole characterisation process or some of its stages take place. - Laboratory - Laboratory - The laboratory where the whole characterisation process or some of its stages take place. + + + + + T-1 L0 M+1 I-1 Θ0 N0 J0 + + + + + MassPerElectricChargeUnit + MassPerElectricChargeUnit - - + + - Process for joining two (base) materials by means of an adhesive polymer material - Gluing - Kleben - Gluing + Process consisting of two steps: - first, the steel is heated in a quenching treatment to a temperature above Ac3 and then rapidly cooled in a liquid to produce a process-specific grain structure; - subsequently, the steel is heated to a specific temperature during tempering to set the desired property and cooled in air. + Tempering + QuenchingAndTempering + Vergüten + Tempering + Process consisting of two steps: - first, the steel is heated in a quenching treatment to a temperature above Ac3 and then rapidly cooled in a liquid to produce a process-specific grain structure; - subsequently, the steel is heated to a specific temperature during tempering to set the desired property and cooled in air. - - - - - Ratio of transverse strain to axial strain. - PoissonNumber - PoissonsRatio - PoissonNumber - https://www.wikidata.org/wiki/Q190453 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-61 - 4-18 - Ratio of transverse strain to axial strain. + + + + Heat to a temperature appropriate for the particular material, maintain at that temperature and then cool at an appropriate rate to reduce hardness, improve machinability or achieve desired properties. + HeatTreatment + wärmebehandeln + HeatTreatment + Heat to a temperature appropriate for the particular material, maintain at that temperature and then cool at an appropriate rate to reduce hardness, improve machinability or achieve desired properties. - - - - CeramicMaterial - CeramicMaterial + + + + + + + + + + + + + The derivative of the electric charge of a system with respect to the electric potential. + Capacitance + ElectricCapacitance + Capacitance + http://qudt.org/vocab/quantitykind/Capacitance + 6-13 + The derivative of the electric charge of a system with respect to the electric potential. + https://doi.org/10.1351/goldbook.C00791 - - - - maximal distance of two points of an object, in a given direction or along a straight line passing through the centre. - The diameter of a circle or a sphere is twice its radius. - Diameter - Diameter - https://qudt.org/vocab/quantitykind/Diameter - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-01-27 - https://dbpedia.org/page/Diameter - 3-1.5 - maximal distance of two points of an object, in a given direction or along a straight line passing through the centre. - https://en.wikipedia.org/wiki/Diameter + + + + + + + + + + + + + + A set of units that correspond to the base quantities in a system of units. + BaseUnit + BaseUnit + A set of units that correspond to the base quantities in a system of units. + base unit - + - - - - - + + + + - - - Here is assumed that the concept of 'object' is always relative to a 'semiotic' process. An 'object' does not exists per se, but it's always part of an interpretation. - -The EMMO relies on strong reductionism, i.e. everything real is a formless collection of elementary particles: we give a meaning to real world entities only by giving them boundaries and defining them using 'sign'-s. - -In this way the 'sign'-ed entity becomes an 'object', and the 'object' is the basic entity needed in order to apply a logical formalism to the real world entities (i.e. we can speak of it through its sign, and use logics on it through its sign). - The object, in Peirce semiotics, as participant to a semiotic process. - SemioticObject - Object - SemioticObject - The object, in Peirce semiotics, as participant to a semiotic process. + + + + + + + + + + + + + + + A symbol that stands for a single unit. + UnitSymbol + UnitSymbol + A symbol that stands for a single unit. + Some examples are "Pa", "m" and "J". - - - + + - GreenCharmQuark - GreenCharmQuark + WNegativeBoson + WNegativeBoson - - - + + + + + + + + + + + + - Quotient of the mass of water in a three-dimensional domain, irrespective of the form of aggregation, by the volume of the domain. - The mass concentration of water at saturation is denoted wsat. - MassConcentrationOfWater - MassConcentrationOfWater - https://qudt.org/vocab/quantitykind/MassConcentrationOfWater - https://www.wikidata.org/wiki/Q76378758 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-59 - 5-27 - Quotient of the mass of water in a three-dimensional domain, irrespective of the form of aggregation, by the volume of the domain. + Energy required to move a unit charge through an electric field from a reference point. + The electric potential is not unique, since any constant scalar +field quantity can be added to it without changing its gradient. + ElectricPotential + ElectroStaticPotential + ElectricPotential + http://qudt.org/vocab/quantitykind/ElectricPotential + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-25 + https://dbpedia.org/page/Electric_potential + 6-11.1 + Energy required to move a unit charge through an electric field from a reference point. + https://en.wikipedia.org/wiki/Electric_potential + https://doi.org/10.1351/goldbook.E01935 - - - - - Mass density ρ of a substance divided by the mass density ρ0 of a reference substance, under conditions that should be specified for both substances. - RelativeMassDensity - RelativeDensity - RelativeMassDensity - https://www.wikidata.org/wiki/Q11027905 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-08 - 4-4 - Mass density ρ of a substance divided by the mass density ρ0 of a reference substance, under conditions that should be specified for both substances. - https://doi.org/10.1351/goldbook.R05262 + + + + + + + + + + + + + + + An elementary particle of half-integer spin (spin 1⁄2) that does not undergo strong interactions. + Lepton + Lepton + An elementary particle of half-integer spin (spin 1⁄2) that does not undergo strong interactions. + https://en.wikipedia.org/wiki/Lepton - - - - - - - - - - - - - - ArithmeticExpression - ArithmeticExpression - 2+2 + + + + Proportionality constant between the magnetic dipole moment and the angular momentum of the electron. + GyromagneticRatioOfTheElectron + GyromagneticCoefficientOfTheElectron + MagnetogyricRatioOfTheElectron + GyromagneticRatioOfTheElectron + https://www.wikidata.org/wiki/Q97543076 + 10-12.2 + Proportionality constant between the magnetic dipole moment and the angular momentum of the electron. - + + - + + + + + + + + - Vector quantity in a quantum system composed of the vectorial sum of angular momentum L and spin s. - TotalAngularMomentum - TotalAngularMomentum - https://qudt.org/vocab/quantitykind/TotalAngularMomentum - https://www.wikidata.org/wiki/Q97496506 - 10-11 - Vector quantity in a quantum system composed of the vectorial sum of angular momentum L and spin s. + Ratio of magnetic dipole moment to total angular momentum. + GyromagneticRatio + GyromagneticCoefficient + MagnetogyricRatio + GyromagneticRatio + https://qudt.org/vocab/quantitykind/GyromagneticRatio + https://www.wikidata.org/wiki/Q634552 + 10-12.1 + Ratio of magnetic dipole moment to total angular momentum. + https://doi.org/10.1351/goldbook.M03693 - - + + - Differential Pulse Voltammetry in which small potential pulses are superimposed onto a staircase potential ramp. - - DifferentialStaircasePulseVoltammetry - DifferentialStaircasePulseVoltammetry - Differential Pulse Voltammetry in which small potential pulses are superimposed onto a staircase potential ramp. + Data processing activities performed on the secondary data to determine the characterisation property (e.g. classification, quantification), which can be performed manually or exploiting a model. + DataAnalysis + DataAnalysis + Data processing activities performed on the secondary data to determine the characterisation property (e.g. classification, quantification), which can be performed manually or exploiting a model. - - - - - + + - - + + - - In computing, a computer file is a resource for recording data on a computer storage device, primarily identified by its file path. - File - File - In computing, a computer file is a resource for recording data on a computer storage device, primarily identified by its file path. + + + + + + + + + + + + + + A computation that provides a data output following the elaboration of some input data, using a data processing application. + DataProcessing + DataProcessing + A computation that provides a data output following the elaboration of some input data, using a data processing application. - - - - - Mean duration required for the decay of one half of the atoms or nuclei. - HalfLife - HalfLife - https://qudt.org/vocab/quantitykind/Half-Life - https://www.wikidata.org/wiki/Q98118544 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-12 - 10-31 - Mean duration required for the decay of one half of the atoms or nuclei. + + + + Widening is tensile forming to increase the circumference of a hollow body. A distinction is made between: Widening, bulging. + Widening + Weiten + Widening - - - - - - - - - - - - - CompositeFermion - CompositeFermion - Examples of composite particles with half-integer spin: -spin 1/2: He3 in ground state, proton, neutron -spin 3/2: He5 in ground state, Delta baryons (excitations of the proton and neutron) + + + + Forming of a solid body, whereby the plastic state is essentially brought about by a combined tensile and compressive stress. + TensileForming + Zugdruckumformen + TensileForming - + - T0 L-2 M0 I+1 Θ-2 N0 J0 + T-2 L-1 M+1 I0 Θ0 N0 J0 - RichardsonConstantUnit - RichardsonConstantUnit + PressureUnit + PressureUnit - - - - - Vector k in the expression ω t−k⋅r+ϑ0 of the phase of a sinusoidal wave. - WaveVector - WaveVector - https://www.wikidata.org/wiki/Q657009 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-10-09 - 3-21 - Vector k in the expression ω t−k⋅r+ϑ0 of the phase of a sinusoidal wave. - https://en.wikipedia.org/wiki/Wave_vector + + + + A molecule composed of only one element type. + Homonuclear + ElementalMolecule + Homonuclear + A molecule composed of only one element type. + Hydrogen molecule (H₂). - - - - - Angular measure between the positive real axis and the radius of the polar representation of the complex number in the complex plane. - PhaseAngle - PhaseAngle - https://www.wikidata.org/wiki/Q415829 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-07-04 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=141-01-01 - 3-7 - Angular measure between the positive real axis and the radius of the polar representation of the complex number in the complex plane. + + + + An product that is ready for commercialisation. + CommercialProduct + Product + CommercialProduct + An product that is ready for commercialisation. - - - - KineticFrictionFactor - DynamicFrictionFactor - KineticFrictionFactor - https://www.wikidata.org/wiki/Q73695445 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-32 - 4-23.2 + + + + A meson with total spin 1 and even parit. + PseudovectorMeson + PseudovectorMeson + A meson with total spin 1 and even parit. + https://en.wikipedia.org/wiki/Pseudovector_meson - + + - - Dimensionless scalar value which describes the ratio of the force of friction between two bodies and the force pressing them together; depends on the materials used, ranges from near zero to greater than one. - CoefficientOfFriction - FrictionCoefficient - FrictionFactor - CoefficientOfFriction - https://www.wikidata.org/wiki/Q1932524 - Dimensionless scalar value which describes the ratio of the force of friction between two bodies and the force pressing them together; depends on the materials used, ranges from near zero to greater than one. - https://doi.org/10.1351/goldbook.F02530 - - - - - - TransportationDevice - TransportationDevice + Quotient of mass excess and the unified atomic mass constant. + RelativeMassExcess + RelativeMassExcess + https://qudt.org/vocab/quantitykind/RelativeMassExcess + https://www.wikidata.org/wiki/Q98038610 + 10-22.1 + Quotient of mass excess and the unified atomic mass constant. - + - + - - + - A flow of electric charge. - ElectricCurrent - ElectricCurrent - http://qudt.org/vocab/quantitykind/ElectricCurrent - 6-1 - A flow of electric charge. - https://doi.org/10.1351/goldbook.E01927 - - - - - - The radiant energy emitted, reflected, transmitted or received, per unit time. - RadiantFlux - RadiantFlux - http://qudt.org/vocab/quantitykind/RadiantFlux - https://doi.org/10.1351/goldbook.R05046 - - - - - - - T0 L0 M0 I0 Θ+2 N0 J0 - - - - - SquareTemperatureUnit - SquareTemperatureUnit + Product of mass and velocity. + Momentum + Momentum + http://qudt.org/vocab/quantitykind/Momentum + 4-8 + https://doi.org/10.1351/goldbook.M04007 - - - + + - - - - + + - - Measure for how the polarization of a material is affected by the application of an external electric field. - Permittivity - Permittivity - http://qudt.org/vocab/quantitykind/Permittivity - 6-14.1 - 6-14.2 - https://doi.org/10.1351/goldbook.P04507 + + A symbolic entity made of other symbolic entities according to a specific spatial configuration. + This class collects individuals that represents arrangements of strings, or other symbolic compositions, without any particular predifined arrangement schema. + SymbolicConstruct + SymbolicConstruct + A symbolic entity made of other symbolic entities according to a specific spatial configuration. + This class collects individuals that represents arrangements of strings, or other symbolic compositions, without any particular predifined arrangement schema. - + + + + A molecule composed of more than one element type. + Heteronuclear + Heteronuclear + A molecule composed of more than one element type. + Nitric oxide (NO) or carbon dioxide (CO₂). + + + + + - - + + - The measure of the resistance of a fluid to flow when an external force is applied. - DynamicViscosity - Viscosity - DynamicViscosity - https://qudt.org/vocab/quantitykind/DynamicViscosity - https://www.wikidata.org/wiki/Q15152757 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-34 - 4-24 - The measure of the resistance of a fluid to flow when an external force is applied. - https://doi.org/10.1351/goldbook.D01877 - - - - - - - T0 L+3 M0 I0 Θ-1 N0 J0 - - - - - VolumePerTemperatureUnit - VolumePerTemperatureUnit + Energy imparted to matter by ionizing radiation in a suitable small element of volume divided by the mass of that element of volume. + AbsorbedDose + AbsorbedDose + http://qudt.org/vocab/quantitykind/AbsorbedDose + Energy imparted to matter by ionizing radiation in a suitable small element of volume divided by the mass of that element of volume. + 10-81.1 + https://doi.org/10.1351/goldbook.A00031 - + + - - + - An objective comparative measure of hot or cold. - -Temperature is a relative quantity that can be used to express temperature differences. Unlike ThermodynamicTemperature, it cannot express absolute temperatures. - CelsiusTemperature - CelsiusTemperature - http://qudt.org/vocab/quantitykind/CelciusTemperature - 5-2 - An objective comparative measure of hot or cold. + Decays per unit time. + Radioactivity + RadioactiveActivity + Radioactivity + http://qudt.org/vocab/quantitykind/SpecificActivity + Decays per unit time. + https://doi.org/10.1351/goldbook.A00114 + -Temperature is a relative quantity that can be used to express temperature differences. Unlike ThermodynamicTemperature, it cannot express absolute temperatures. - https://doi.org/10.1351/goldbook.T06261 + + + + A characterisation experiment is the process by which a material's structure and properties are probed and measured. It is a fundamental process in the field of materials science, without which no scientific understanding of engineering materials could be ascertained. + A characterisation experiment is the process by which a material's structure and properties are probed and measured. It is a fundamental process in the field of materials science, without which no scientific understanding of engineering materials could be ascertained. + CharacterisationExperiment + CharacterisationExperiment + A characterisation experiment is the process by which a material's structure and properties are probed and measured. It is a fundamental process in the field of materials science, without which no scientific understanding of engineering materials could be ascertained. - - + + + + + - - T0 L0 M0 I0 Θ-1 N0 J0 + + - - - - PerTemperatureUnit - PerTemperatureUnit + + + An experiment is a process that is intended to replicate a physical phenomenon in a controlled environment. + Experiment + Experiment + An experiment is a process that is intended to replicate a physical phenomenon in a controlled environment. - - + + + - - T-2 L+2 M+1 I-1 Θ0 N0 J0 + + + + + + - - - - MagneticFluxUnit - MagneticFluxUnit - - - - - - - RedDownQuark - RedDownQuark - - - - - - Data that are expressed through quantum mechanical principles, and that can have several values ​​/ be in several states in the same place at the same time (quantum superposition), each of them with a certain probability. - QuantumData - QuantumData - Data that are expressed through quantum mechanical principles, and that can have several values ​​/ be in several states in the same place at the same time (quantum superposition), each of them with a certain probability. + + + A constituent of a system. + Component + Component + A constituent of a system. - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - + - - - - - - - - - - - - - - - - - - - - - - + + - - RedAntiQuark - RedAntiQuark + + A causal chain is an ordered causal sequence of entities that does not host any bifurcation within itself (a chain). A chain can only be partitioned in time. + The class of entities that possess a temporal structure but no spatial structure. + CausalPath + CausalChain + Elementary + CausalPath + A causal chain is an ordered causal sequence of entities that does not host any bifurcation within itself (a chain). A chain can only be partitioned in time. + The class of entities that possess a temporal structure but no spatial structure. + An electron with at least one causal interaction with another particle. + hasTemporalPart min 2 (Elementary or Quantum) - - - - - - - + + + + An artificial computer language used to express information or knowledge, often for use in computer system design. + ModellingLanguage + ModellingLanguage + An artificial computer language used to express information or knowledge, often for use in computer system design. + Architecture description language – used as a language (or a conceptual model) to describe and represent system architectures. + Hardware description language – used to model integrated circuits. + +Architecture description language – used as a language (or a conceptual model) to describe and represent system architectures. + +Algebraic Modeling Language which is a high-level programming languages for describing and solving high complexity problems like large-scale optimisation. + https://en.wikipedia.org/wiki/Modeling_language + + + + + + A semantic object that is connected to an index sign by an interpreter (a deducer) by causal cogiguity. + Deduced + Deduced + A semantic object that is connected to an index sign by an interpreter (a deducer) by causal cogiguity. + + + + + + + - - - - - - - + - - - - - TopAntiQuark - TopAntiQuark + + + + + + A 'Sign' that stands for an 'Object' due to causal continguity. + Index + Signal + Index + A 'Sign' that stands for an 'Object' due to causal continguity. + Smoke stands for a combustion process (a fire). +My facial expression stands for my emotional status. + + + + + + + + Force resisting the motion when a body (such as a ball, tire, or wheel) rolls on a surface. + RollingResistance + RollingDrag + RollingFrictionForce + RollingResistance + https://www.wikidata.org/wiki/Q914921 + 4-9.5 + Force resisting the motion when a body (such as a ball, tire, or wheel) rolls on a surface. + + + + + + + Quotient of tangential and normal component of the force applied to a body which is rolling at constant speed over a surface. + RollingResistanceFactor + RollingResistanceFactor + https://www.wikidata.org/wiki/Q91738044 + 4-23.3 + Quotient of tangential and normal component of the force applied to a body which is rolling at constant speed over a surface. - - - - - Quotient of Larmor angular frequency and 2π. - LarmonFrequency - LarmonFrequency - 10-15.2 - Quotient of Larmor angular frequency and 2π. + + + + A scripting language developed specifically for an application, so that it's usage and interpretation is limited in this context. + ApplicationSpecificScript + ApplicationSpecificScript + A scripting language developed specifically for an application, so that it's usage and interpretation is limited in this context. + Scripting file for the execution of modelling software such as LAMMPS, OpenFOAM, or for general purpose platforms such as MATLAB or Mathematica. - + + + + A programming language that is executed through runtime interpretation. + ScriptingLanguage + ScriptingLanguage + A programming language that is executed through runtime interpretation. + + + - + - + - Number of periods per time interval. - Frequency - Frequency - http://qudt.org/vocab/quantitykind/Frequency - https://www.wikidata.org/wiki/Q11652 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-06-02 - 3-15.1 - Number of periods per time interval. - https://doi.org/10.1351/goldbook.FT07383 + Conductivity per molar concentration of electrolyte. + MolarConductivity + MolarConductivity + https://qudt.org/vocab/quantitykind/MolarConductivity + https://www.wikidata.org/wiki/Q1943278 + 9-45 + Conductivity per molar concentration of electrolyte. + https://doi.org/10.1351/goldbook.M03976 - - - - A measurement unit for a derived quantity. --- VIM - Derived units are defined as products of powers of the base units corresponding to the relations defining the derived quantities in terms of the base quantities. - DerivedUnit - DerivedUnit - Derived units are defined as products of powers of the base units corresponding to the relations defining the derived quantities in terms of the base quantities. - derived unit - A measurement unit for a derived quantity. --- VIM + + + + Count per volume. + VolumetricNumberDensity + VolumetricNumberDensity + Count per volume. - + - - - - - - + + + T+2 L-2 M-1 I0 Θ0 N0 J0 + - - - - - - - - - - - - - - MathematicalSymbol - MathematicalSymbol + + + PerEnergyUnit + PerEnergyUnit - + - - + - Surface density of electric charge multiplied by velocity - LinearElectricCurrentDensity - LinearElectricCurrentDensity - https://qudt.org/vocab/quantitykind/LinearElectricCurrentDensity - https://www.wikidata.org/wiki/Q2356741 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-12 - 6-9 - Surface density of electric charge multiplied by velocity - + Length per unit time. - - - - Cutting workpieces between two cutting edges that move past each other (see Figure 1 [see figure in the standard]). - ShearCutting - Scherschneiden - ShearCutting +Speed in the absolute value of the velocity. + Speed + Speed + http://qudt.org/vocab/quantitykind/Speed + 3-8.2 + https://doi.org/10.1351/goldbook.S05852 - - + + - A CausalSystem whose quantum parts are all bonded to the rest of the system. - It is natural to define entities made or more than one smaller parts according to some unity criteria. One of the most general one applicable to causal systems is to ask that all the quantum parts of the system are bonded to the rest. -In other words, causal convexity excludes all quantums that leave the system (no more interacting), or that are not yet part of it (not yet interacting). -So, a photon leaving a body is not part of the body as convex system, while a photon the is carrier of electromagnetic interaction between two molecular parts of the body, is part of the convex body. - CausalConvexSystem - CausalConvexSystem - It is natural to define entities made or more than one smaller parts according to some unity criteria. One of the most general one applicable to causal systems is to ask that all the quantum parts of the system are bonded to the rest. -In other words, causal convexity excludes all quantums that leave the system (no more interacting), or that are not yet part of it (not yet interacting). -So, a photon leaving a body is not part of the body as convex system, while a photon the is carrier of electromagnetic interaction between two molecular parts of the body, is part of the convex body. - A CausalSystem whose quantum parts are all bonded to the rest of the system. - - - - - - - Mean total rectified path length travelled by a particle in the course of slowing down to rest in a given material averaged over a group of particles having the same initial energy. - MeanLinearRange - MeanLinearRange - https://qudt.org/vocab/quantitykind/MeanLinearRange - https://www.wikidata.org/wiki/Q98681589 - 10-56 - Mean total rectified path length travelled by a particle in the course of slowing down to rest in a given material averaged over a group of particles having the same initial energy. - https://doi.org/10.1351/goldbook.M03782 - - - - - - - Measure of a conical geometric figure, called solid angle, formed by all rays, originating from a common point, called the vertex of the solid angle, and passing through the points of a closed, non-self-intersecting curve in space considered as the border of a surface. - SolidAngularMeasure - SolidAngle - SolidAngularMeasure - https://qudt.org/vocab/quantitykind/SolidAngle - https://www.wikidata.org/wiki/Q208476 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=102-04-46 - https://dbpedia.org/page/Solid_angle - 3-8 - Measure of a conical geometric figure, called solid angle, formed by all rays, originating from a common point, called the vertex of the solid angle, and passing through the points of a closed, non-self-intersecting curve in space considered as the border of a surface. - https://en.wikipedia.org/wiki/Solid_angle - - - - - - - The charge of an electron. - The negative of ElementaryCharge. - ElectronCharge - ElectronCharge - The charge of an electron. - https://doi.org/10.1351/goldbook.E01982 - - - - - - - Average number of fission neutrons, both prompt and delayed, emitted per fission event. - NeutronYieldPerFission - NeutronYieldPerFission - https://qudt.org/vocab/quantitykind/NeutronYieldPerFission - https://www.wikidata.org/wiki/Q99157909 - 10-74.1 - Average number of fission neutrons, both prompt and delayed, emitted per fission event. - - - - - - - - = - - - - The equals symbol. - Equals - Equals - The equals symbol. - - - - - - - - HardwareManufacturer - HardwareManufacturer - - - - - - - CharacterisationHardwareSpecification - CharacterisationHardwareSpecification + RightHandedParticle + RightHandedParticle - - - - - HardwareModel - HardwareModel + + + + + + A path is a string of characters used to uniquely identify a location in a directory structure according to a particular convention. + Path + Path + A path is a string of characters used to uniquely identify a location in a directory structure according to a particular convention. + /etc/fstab (UNIX-like path) +C:\\Users\\John\\Desktop (DOS-like path) - - - - The interpreter's internal representation of the object in a semiosis process. - Interpretant - Interpretant - The interpreter's internal representation of the object in a semiosis process. + + + + A set of reasons or a logical basis for a decision or belief + Rationale + Rationale + A set of reasons or a logical basis for a decision or belief - + - T+1 L-3 M0 I+1 Θ0 N0 J0 + T0 L-2 M0 I+1 Θ-2 N0 J0 - ElectricChargeDensityUnit - ElectricChargeDensityUnit + RichardsonConstantUnit + RichardsonConstantUnit - + - Act of extracting a portion (amount) of material from a larger quantity of material. This operation results in obtaining a sample representative of the batch with respect to the property or properties being investigated. - The term can be used to cover either a unit of supply or a portion for analysis. The portion taken may consist of one or more sub-samples and the batch may be the population from which the sample is taken. - - SamplingProcess - SamplingProcess - Act of extracting a portion (amount) of material from a larger quantity of material. This operation results in obtaining a sample representative of the batch with respect to the property or properties being investigated. - The term can be used to cover either a unit of supply or a portion for analysis. The portion taken may consist of one or more sub-samples and the batch may be the population from which the sample is taken. - - - - - - - - - - - - - - - Differential quotient of the cross section for a process and the energy of the scattered particle. - EnergyDistributionOfCrossSection - EnergyDistributionOfCrossSection - https://qudt.org/vocab/quantitykind/SpectralCrossSection - https://www.wikidata.org/wiki/Q98267245 - 10-40 - Differential quotient of the cross section for a process and the energy of the scattered particle. - - - - - - - - - - - - - - - - - A causal structure expresses itself in time and space thanks to the underlying causality relations between its constituent quantum entities. It must at least provide two temporal parts. -The unity criterion beyond the definition of a causal structure (the most general concept of structure) is the existence of an undirected causal path between each of its parts. - A self-connected composition of more than one quantum entities. - The most fundamental unity criterion for the definition of an structure is that: -- is made of at least two quantums (a structure is not a simple entity) -- all quantum parts form a causally connected graph - The union of CausalPath and CausalSystem classes. - CausalStructure - CausalObject - CausalStructure - The most fundamental unity criterion for the definition of an structure is that: -- is made of at least two quantums (a structure is not a simple entity) -- all quantum parts form a causally connected graph - The union of CausalPath and CausalSystem classes. - A self-connected composition of more than one quantum entities. - A causal structure expresses itself in time and space thanks to the underlying causality relations between its constituent quantum entities. It must at least provide two temporal parts. -The unity criterion beyond the definition of a causal structure (the most general concept of structure) is the existence of an undirected causal path between each of its parts. + A characterisation protocol is defined whenever it is desirable to standardize a laboratory method to ensure successful replication of results by others in the same laboratory or by other laboratories. + CharacterisationProtocol + CharacterisationProtocol + A characterisation protocol is defined whenever it is desirable to standardize a laboratory method to ensure successful replication of results by others in the same laboratory or by other laboratories. - - - - - Arctan of the loss factor - LossAngle - LossAngle - https://www.qudt.org/vocab/quantitykind/LossAngle - https://www.wikidata.org/wiki/Q20820438 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-49 - 6-55 - Arctan of the loss factor + + + + The creep test is a destructive materials testing method for determination of the long-term strength and heat resistance of a material. When running a creep test, the specimen is subjected to increased temperature conditions for an extended period of time and loaded with a constant tensile force or tensile stress. + CreepTesting + CreepTesting + The creep test is a destructive materials testing method for determination of the long-term strength and heat resistance of a material. When running a creep test, the specimen is subjected to increased temperature conditions for an extended period of time and loaded with a constant tensile force or tensile stress. - - - - - Partition function of a molecule. - MolecularPartitionFunction - MolecularPartitionFunction - https://www.wikidata.org/wiki/Q96192064 - 9-35.4 - Partition function of a molecule. + + + + + Has shaped bodies as input and output. + The processing of a material aimed to transform its structure by means of any type of treatment, without involving relevant synthesis phenomena. + esce workpiece + MaterialTreatment + DIN 8580:2020 + Stoffeigenschaft ändern + WorkPieceTreatment + MaterialTreatment + The processing of a material aimed to transform its structure by means of any type of treatment, without involving relevant synthesis phenomena. + Has shaped bodies as input and output. + Manufacturing by changing the properties of the material of which a workpiece is made, which is done, among other things, by changes in the submicroscopic or atomic range, e.g. by diffusion of atoms, generation and movement of dislocations in the atomic lattice or chemical reactions, and where unavoidable changes in shape are not part of the essence of these processes. @@ -13019,476 +11533,384 @@ The unity criterion beyond the definition of a causal structure (the most genera A material process requires the output to be classified as an individual of a material subclass. - - - - A standalone atom with an unbalanced number of electrons with respect to its atomic number. - The ion_atom is the basic part of a pure ionic bonded compound i.e. without eclectron sharing, - IonAtom - IonAtom - A standalone atom with an unbalanced number of electrons with respect to its atomic number. - - - - - - - + + - - + + - - The name “thermal resistance” and the symbol R are used in building technology to designate thermal insulance. - Thermodynamic temperature difference divided by heat flow rate. - ThermalResistance - ThermalResistance - https://qudt.org/vocab/quantitykind/ThermalResistance - https://www.wikidata.org/wiki/Q899628 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-45 - 5-12 - Thermodynamic temperature difference divided by heat flow rate. - - - - - - The dependent variable for which an equation has been written. - Unknown - Unknown - The dependent variable for which an equation has been written. - Velocity, for the Navier-Stokes equation. - - - - - - A variable standing for a numerical defined mathematical object like e.g. a number, a vector of numbers, a matrix of numbers. - NumericalVariable - NumericalVariable - A variable standing for a numerical defined mathematical object like e.g. a number, a vector of numbers, a matrix of numbers. - - - - + - - T-2 L+3 M+1 I-1 Θ+1 N0 J0 + + - - - - NewtonSquareMetrePerAmpereUnit - NewtonSquareMetrePerAmpereUnit - - - - - - A single phase mixture. - PhaseHomogeneousMixture - PhaseHomogeneousMixture - A single phase mixture. - - - - + + - - T-1 L-2 M0 I0 Θ0 N0 J0 + + - - - - PerAreaTimeUnit - PerAreaTimeUnit + + + Deals with entities that have a defined shape. + The process of transforming precursor objects (e.g. raw materials) into a product by the use of manual labor, machinery or chemical/biological processes. + Manufacturing + DIN 8580:2020 + ISO 15531-1:2004 +manufacturing: function or act of converting or transforming material from raw material or semi-finished state to a state of further completion + ISO 18435-1:2009 +manufacturing process: set of processes in manufacturing involving a flow and/or transformation of material, information, energy, control, or any other element in a manufacturing area + Manufacturing + The process of transforming precursor objects (e.g. raw materials) into a product by the use of manual labor, machinery or chemical/biological processes. + Deals with entities that have a defined shape. + https://de.wikipedia.org/wiki/Fertigungsverfahren - - - + + - Resistance quantum. - The von Klitzing constant is defined as Planck constant divided by the square of the elementary charge. - VonKlitzingConstant - VonKlitzingConstant - http://qudt.org/vocab/constant/VonKlitzingConstant - The von Klitzing constant is defined as Planck constant divided by the square of the elementary charge. + In non-relativistic physics, the centre of mass doesn’t depend on the chosen reference frame. + The unique point where the weighted relative position of the distributed mass of an Item sums to zero. Equivalently, it is the point where if a force is applied to the Item, causes the Item to move in direction of force without rotation. + CentreOfMass + CentreOfMass + The unique point where the weighted relative position of the distributed mass of an Item sums to zero. Equivalently, it is the point where if a force is applied to the Item, causes the Item to move in direction of force without rotation. + https://en.wikipedia.org/wiki/Center_of_mass - - + + + - ModulusOfImpedance - ModulusOfImpedance - https://qudt.org/vocab/quantitykind/ModulusOfImpedance - https://www.wikidata.org/wiki/Q25457909 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-44 - 6-51.4 + Fraction of atoms in an Ising ferromagnet having magnetic moments in one direction, minus the fraction having magnetic moments in the opposite direction. + LongRangeOrderParameter + LongRangeOrderParameter + https://qudt.org/vocab/quantitykind/Long-RangeOrderParameter + https://www.wikidata.org/wiki/Q105496124 + 12-5.2 + Fraction of atoms in an Ising ferromagnet having magnetic moments in one direction, minus the fraction having magnetic moments in the opposite direction. - - + + - A technique used to measure the specific surface area of porous materials by analyzing the adsorption of gas molecules onto the material's surface - BrunauerEmmettTellerMethod - BET - BrunauerEmmettTellerMethod - https://www.wikidata.org/wiki/Q795838 - A technique used to measure the specific surface area of porous materials by analyzing the adsorption of gas molecules onto the material's surface - https://en.wikipedia.org/wiki/BET_theory + Act of extracting a portion (amount) of material from a larger quantity of material. This operation results in obtaining a sample representative of the batch with respect to the property or properties being investigated. + The term can be used to cover either a unit of supply or a portion for analysis. The portion taken may consist of one or more sub-samples and the batch may be the population from which the sample is taken. + + SamplingProcess + SamplingProcess + Act of extracting a portion (amount) of material from a larger quantity of material. This operation results in obtaining a sample representative of the batch with respect to the property or properties being investigated. + The term can be used to cover either a unit of supply or a portion for analysis. The portion taken may consist of one or more sub-samples and the batch may be the population from which the sample is taken. - - - - Gas Adsorption Porosimetry is a method used for analyzing the surface area and porosity of materials. In this method, a gas, typically nitrogen or argon, is adsorbed onto the surface of the material at various pressures and temperatures. - - GasAdsorptionPorosimetry - GasAdsorptionPorosimetry - GasAdsorptionPorosimetry - Gas Adsorption Porosimetry is a method used for analyzing the surface area and porosity of materials. In this method, a gas, typically nitrogen or argon, is adsorbed onto the surface of the material at various pressures and temperatures. + + + + Forming of a solid body, whereby the plastic state is essentially brought about by shear stress. + ShearForming + Schubumformen + ShearForming - + - + - Electric field strength multiplied by magnetic field strength. - PoyntingVector - PoyntingVector - https://qudt.org/vocab/quantitykind/PoyntingVector - https://www.wikidata.org/wiki/Q504186 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-66 - 6-34 - Electric field strength multiplied by magnetic field strength. - - - - - - - CharacterisationComponent - CharacterisationComponent - - - - - - - - - - - - - - - - - - - - - - - AntiNeutrinoType - AntiNeutrinoType + Scalar quantity equal to the line integral of the magnetic field strength H along a specified path linking two points a and b. + MagneticTension + MagneticTension + https://qudt.org/vocab/quantitykind/MagneticTension + https://www.wikidata.org/wiki/Q77993836 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-57 + 6-37.2 + Scalar quantity equal to the line integral of the magnetic field strength H along a specified path linking two points a and b. - - - - heat treatment consisting of heating and soaking at a suitable temperature, followed by cooling under conditions such that, after return to ambient temperature, the metal will be in a structural state closer to that of equilibrium - Annealing - Annealing - heat treatment consisting of heating and soaking at a suitable temperature, followed by cooling under conditions such that, after return to ambient temperature, the metal will be in a structural state closer to that of equilibrium + + + + Unit for quantities of dimension one that are the fraction of two volumes. + VolumeFractionUnit + VolumeFractionUnit + Unit for quantities of dimension one that are the fraction of two volumes. + Unit for volume fraction. - - - + + + - GreenBottomAntiQuark - GreenBottomAntiQuark + GreenBottomQuark + GreenBottomQuark - - - - - - - - - - - - - - - - - - - - - BottomAntiQuark - BottomAntiQuark + + + + + Under sinusoidal conditions, phase difference between the voltage applied to a linear two-terminal element or two-terminal circuit and the electric current in the element or circuit. + PhaseDifference + DisplacementAngle + PhaseDifference + https://www.wikidata.org/wiki/Q97222919 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-11-48 + 6-48 + Under sinusoidal conditions, phase difference between the voltage applied to a linear two-terminal element or two-terminal circuit and the electric current in the element or circuit. - - - - ElectricCurrentAssistedSintering - ElectricCurrentAssistedSintering - + + + + A causal object which is tessellated with only spatial direct parts. + The definition of an arrangement implies that its spatial direct parts are not gained or lost during its temporal extension (they exist from the left to the right side of the time interval), so that the cardinality of spatial direct parts in an arrangement is constant. +This does not mean that there cannot be a change in the internal structure of the arrangement direct parts. It means only that this change must not affect the existence of the direct part itself. + The use of spatial direct parthood in state definition means that an arrangement cannot overlap in space another arrangement that is direct part of the same whole. + Arrangement + MereologicalState + Arrangement + A causal object which is tessellated with only spatial direct parts. + e.g. the existent in my glass is declared at t = t_start as made of two direct parts: the ice and the water. It will continue to exists as state as long as the ice is completely melt at t = t_end. The new state will be completely made of water. Between t_start and t_end there is an exchange of molecules between the ice and the water, but this does not affect the existence of the two states. - - - - - Relative change of length with respect the original length. - RelativeLinearStrain - RelativeLinearStrain - https://qudt.org/vocab/quantitykind/LinearStrain - https://www.wikidata.org/wiki/Q1990546 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-58 - 4-17.2 - Relative change of length with respect the original length. - https://doi.org/10.1351/goldbook.L03560 +If we partition the existent in my glass as ice surrounded by several molecules (we do not use the object water as direct part) then the appearance of a molecule coming from the ice will cause a state to end and another state to begin. - - - - The class of individuals that satisfy a whole defining criteria (i.e. belongs to a subclass of whole) and have no spatial parts that satisfy that same criteria (no parts that are of the same type of the whole). - SpatiallyFundamental - SpatiallyFundamental - The class of individuals that satisfy a whole defining criteria (i.e. belongs to a subclass of whole) and have no spatial parts that satisfy that same criteria (no parts that are of the same type of the whole). + + + + + + + + + + A well formed tessellation with tiles that all spatial. + SpatialTiling + SpatialTiling + A well formed tessellation with tiles that all spatial. - - + + + + + + - - T0 L0 M0 I0 Θ0 N-1 J0 + + - - - - PerAmountUnit - PerAmountUnit + + + Scalar potential of an irrotational magnetic field strength. + ScalarMagneticPotential + ScalarMagneticPotential + https://www.wikidata.org/wiki/Q17162107 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-58 + 6-37.1 + Scalar potential of an irrotational magnetic field strength. - - - - - - - - - - - - - A mathematical model can be defined as a description of a system using mathematical concepts and language to facilitate proper explanation of a system or to study the effects of different components and to make predictions on patterns of behaviour. + + + + + E_0 = m_0 * c_0^2 + +where m_0 is the rest mass of that particle and c_0 is the speed of light in a vacuum. + Product of the rest mass and the square of the speed of light in vacuum. + RestEnergy + RestEnergy + https://www.wikidata.org/wiki/Q11663629 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-05 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-04-17 + 10-3 + Product of the rest mass and the square of the speed of light in vacuum. + E_0 = m_0 * c_0^2 -Abramowitz and Stegun, 1968 - An analogical icon expressed in mathematical language. - MathematicalModel - MathematicalModel - An analogical icon expressed in mathematical language. +where m_0 is the rest mass of that particle and c_0 is the speed of light in a vacuum. + https://en.wikipedia.org/wiki/Invariant_mass#Rest_energy - - - - The term "Uniform Resource Name" (URN) has been used historically to refer to both URIs under the "urn" scheme [RFC2141], which are required to remain globally unique and persistent even when the resource ceases to exist or becomes unavailable, and to any other URI with the properties of a name. - URN - URN - The term "Uniform Resource Name" (URN) has been used historically to refer to both URIs under the "urn" scheme [RFC2141], which are required to remain globally unique and persistent even when the resource ceases to exist or becomes unavailable, and to any other URI with the properties of a name. - + + + + A material is a crystal if it has essentially a sharp diffraction pattern. - - - - - An object which is an holistic temporal part of a process. - Status - State - Status - An object which is an holistic temporal part of a process. - A semi-naked man is a status in the process of a man's dressing. - +A solid is a crystal if it has essentially a sharp diffraction pattern. The word essentially means that most of the intensity of the diffraction is concentrated in relatively sharp Bragg peaks, besides the always present diffuse scattering. In all cases, the positions of the diffraction peaks can be expressed by - - - - - RedBottomQuark - RedBottomQuark + +H=∑ni=1hia∗i (n≥3) + Crystal + Crystal + A material is a crystal if it has essentially a sharp diffraction pattern. + +A solid is a crystal if it has essentially a sharp diffraction pattern. The word essentially means that most of the intensity of the diffraction is concentrated in relatively sharp Bragg peaks, besides the always present diffuse scattering. In all cases, the positions of the diffraction peaks can be expressed by + + +H=∑ni=1hia∗i (n≥3) - - + + + - + - - - - - - - - - - - - - - - - - - - - - - + + - RedQuark - RedQuark + A chausal chain whose quantum parts are of the same standard model fundamental type. + An elementary particle is a causal chain of quantum entities of the same type. For example, an elementary electron is a sequence of fundamental electrons only. + ElementaryParticle + SingleParticleChain + ElementaryParticle + An elementary particle is a causal chain of quantum entities of the same type. For example, an elementary electron is a sequence of fundamental electrons only. + A chausal chain whose quantum parts are of the same standard model fundamental type. - - - + + - + - - - - - - - + + - - BottomQuark - BottomQuark - https://en.wikipedia.org/wiki/Bottom_quark + + A well defined physical entity, elementary or composite, usually treated as a singular unit, that is found at scales spanning from the elementary particles to molecules, as fundamental constituents of larger scale substances (as the etymology of "particle" suggests). + The scope of the physical particle definition goes from the elementary particles to molecules, as fundamental constituents of substances. + The union of hadron and lepton, or fermion and bosons. + PhysicalParticle + Particle + PhysicalParticle + The union of hadron and lepton, or fermion and bosons. + A well defined physical entity, elementary or composite, usually treated as a singular unit, that is found at scales spanning from the elementary particles to molecules, as fundamental constituents of larger scale substances (as the etymology of "particle" suggests). + The scope of the physical particle definition goes from the elementary particles to molecules, as fundamental constituents of substances. - - - - Minimum length of a straight line segment between a point and a reference line or reference surface. - Height - Height - https://qudt.org/vocab/quantitykind/Height - https://www.wikidata.org/wiki/Q208826 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-01-21 - https://dbpedia.org/page/Height - 3-1.3 - Minimum length of a straight line segment between a point and a reference line or reference surface. - https://en.wikipedia.org/wiki/Height + + + + The general principle of freezing point depression osmometry involves the relationship between the number of moles of dissolved solute in a solution and the change in freezing point. + + FreezingPointDepressionOsmometry + FreezingPointDepressionOsmometry + The general principle of freezing point depression osmometry involves the relationship between the number of moles of dissolved solute in a solution and the change in freezing point. - + - T0 L0 M+1 I0 Θ0 N-1 J0 + T0 L-2 M0 I+1 Θ0 N0 J0 - - MassPerAmountUnit - MassPerAmountUnit + + ElectricCurrentDensityUnit + ElectricCurrentDensityUnit - - - - - - - - - - - - - Negative quotient of Helmholtz energy and temperature. - MassieuFunction - MassieuFunction - https://qudt.org/vocab/quantitykind/MassieuFunction - https://www.wikidata.org/wiki/Q3077625 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-26 - 5-22 - Negative quotient of Helmholtz energy and temperature. + + + + InterferenceFitting + InterferenceFitting - - - - - + + + + In general, for a given set of information, it is understood that the measurement uncertainty is associated with a stated quantity value. A modification of this value results in a modification of the associated uncertainty. + Metrological uncertainty in EMMO is a slight generalisation of the VIM term 'measurement uncertainty', which is defined as "a non-negative parameter characterising the dispersion of the quantity being measured". + Metrological uncertainty includes components arising from systematic effects, such as components associated with corrections and the assigned quantity values of measurement standards, as well as the definitional uncertainty. Sometimes estimated systematic effects are not corrected for but, instead, associated measurement uncertainty components are incorporated. + The uncertainty of a quantity obtained through a well-defined procedure, characterising of the dispersion of the quantity. + MetrologicalUncertainty + A metrological uncertainty can be assigned to any objective property via the 'hasMetrologicalUncertainty' relation. + MetrologicalUncertainty + The uncertainty of a quantity obtained through a well-defined procedure, characterising of the dispersion of the quantity. + - Standard deviation +- Half-width of an interval with a stated coverage probability + Metrological uncertainty in EMMO is a slight generalisation of the VIM term 'measurement uncertainty', which is defined as "a non-negative parameter characterising the dispersion of the quantity being measured". + + + + + + + A quantity that is obtained from a well-defined procedure. + Subclasses of 'ObjectiveProperty' classify objects according to the type semiosis that is used to connect the property to the object (e.g. by measurement, by convention, by modelling). + The word objective does not mean that each observation will provide the same results. It means that the observation followed a well defined procedure. + +This class refers to what is commonly known as physical property, i.e. a measurable property of physical system, whether is quantifiable or not. + ObjectiveProperty + PhysicalProperty + QuantitativeProperty + ObjectiveProperty + A quantity that is obtained from a well-defined procedure. + The word objective does not mean that each observation will provide the same results. It means that the observation followed a well defined procedure. + +This class refers to what is commonly known as physical property, i.e. a measurable property of physical system, whether is quantifiable or not. + + + + + + The superclass for all physical quantities classes that are categorized according to a standard (e.g. ISQ). + StandardizedPhysicalQuantity + StandardizedPhysicalQuantity + The superclass for all physical quantities classes that are categorized according to a standard (e.g. ISQ). + + + + - - + + + + + + - - Quantity equal to the volume dV of substance crossing a given surface during a time interval with infinitesimal duration dt, divided by this duration, thus qV = dV / dt- - VolumeFlowRate - VolumetricFlowRate - VolumeFlowRate - https://qudt.org/vocab/quantitykind/VolumeFlowRate - https://www.wikidata.org/wiki/Q1134348 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-72 - 4-31 - Quantity equal to the volume dV of substance crossing a given surface during a time interval with infinitesimal duration dt, divided by this duration, thus qV = dV / dt- - https://en.wikipedia.org/wiki/Volumetric_flow_rate + + A direct part that is obtained by partitioning a whole hybridly in spatial, temporal and spatiotemporal parts. + JunctionTile + JunctionTile + A direct part that is obtained by partitioning a whole hybridly in spatial, temporal and spatiotemporal parts. - - - + + - + - + - + @@ -13497,414 +11919,391 @@ Abramowitz and Stegun, 1968 - UpQuark - UpQuark - https://en.wikipedia.org/wiki/Up_quark + DownAntiQuarkType + DownAntiQuarkType - + + + + Class that includes the application of scientific knowledge, tools and techniques in order to transform a precursor object (ex. conversion of material) following a practic purpose. + Conversion of materials and assembly of components for the manufacture of products + Technology is the application of knowledge for achieving practical goals in a reproducible way. + Technology refers to methods, systems, and devices which are the result of scientific knowledge being used for practical purposes. + application of scientific knowledge, tools, techniques, crafts or systems in order to solve a problem or to achieve an objective which can result in a product or process + application of scientific knowledge, tools, techniques, crafts, systems or methods of organization in order to solve a problem or achieve an objective + TechnologyProcess + ProductionEngineeringProcess + TechnologyProcess + Class that includes the application of scientific knowledge, tools and techniques in order to transform a precursor object (ex. conversion of material) following a practic purpose. + + + - T0 L-3 M0 I0 Θ0 N+1 J0 + T-1 L+2 M+1 I0 Θ0 N-1 J0 - - AmountConcentrationUnit - AmountConcentrationUnit - - - - - - A semantic object that is connected to an index sign by an interpreter (a deducer) by causal cogiguity. - Deduced - Deduced - A semantic object that is connected to an index sign by an interpreter (a deducer) by causal cogiguity. - - - - - - Reciprocal of the wavelength. - Wavenumber - Repetency - Wavenumber - https://qudt.org/vocab/quantitykind/Wavenumber - https://www.wikidata.org/wiki/Q192510 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-10-11 - https://dbpedia.org/page/Wavenumber - 3-20 - Reciprocal of the wavelength. - https://en.wikipedia.org/wiki/Wavenumber - https://doi.org/10.1351/goldbook.W06664 + EnergyTimePerAmountUnit + EnergyTimePerAmountUnit - + - Optical microscopy is a technique used to closely view a sample through the magnification of a lens with visible light + Electron probe microanalysis (EPMA) is used for quantitative analysis of the elemental composition of solid specimens at a micrometer scale. The method uses bombardment of the specimen by keV electrons to excite characteristic X-rays from the sample, which are then detected by using wavelength-dispersive (WD) spectrometers. - OpticalMicroscopy - OpticalMicroscopy - Optical microscopy is a technique used to closely view a sample through the magnification of a lens with visible light - - - - - - - - - 1 - - - - - - - 1 - - - - A quantity value is not necessarily a property, since it is possible to write "10 kg", without assigning this quantity to a specific object. - A symbolic that has parts a numerical object and a reference expressing the value of a quantity (expressed as the product of the numerical and the unit). - Following the International Vocabulary of Metrology (VIM), EMMO distinguishes between a quantity (a property) and the quantity value (a numerical and a reference). - -So, for the EMMO the symbol "kg" is not a physical quantity but simply a 'Symbolic' object categorized as a 'MeasurementUnit'. - -While the string "1 kg" is a 'QuantityValue'. - QuantityValue - QuantityValue - A symbolic that has parts a numerical object and a reference expressing the value of a quantity (expressed as the product of the numerical and the unit). - 6.8 m -0.9 km -8 K -6 MeV -43.5 HRC(150 kg) - quantity value - A quantity value is not necessarily a property, since it is possible to write "10 kg", without assigning this quantity to a specific object. - - - - - - - - - - - - - - - - SecondPolarMomentOfArea - SecondPolarMomentOfArea - https://qudt.org/vocab/quantitykind/SecondPolarMomentOfArea - https://www.wikidata.org/wiki/Q1049636 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-30 - 4-21.2 - - - - - - - time constant for scattering, trapping or annihilation of charge carriers, phonons or other quasiparticles - RelaxationTime - RelaxationTime - https://www.wikidata.org/wiki/Q106041085 - 12-32.1 - time constant for scattering, trapping or annihilation of charge carriers, phonons or other quasiparticles - - - - - - - NumberOfTurnsInAWinding - NumberOfTurnsInAWinding - https://www.wikidata.org/wiki/Q77995997 - 6-38 - - - - - - - IsothermalCompressibility - IsothermalCompressibility - https://qudt.org/vocab/quantitykind/IsothermalCompressibility - https://www.wikidata.org/wiki/Q2990696 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-31 - 5-5.1 - - - - - - - - - - - - - - - Measure of the relative volume change of a fluid or solid as a response to a pressure change. - Compressibility - Compressibility - https://qudt.org/vocab/quantitykind/Compressibility - https://www.wikidata.org/wiki/Q8067817 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-70 - 4-20 - Measure of the relative volume change of a fluid or solid as a response to a pressure change. - - - - - - - - - - - - - - - The amount of a constituent divided by the volume of the mixture. - AmountConcentration - Concentration - MolarConcentration - Molarity - AmountConcentration - http://qudt.org/vocab/quantitykind/AmountOfSubstanceConcentrationOfB - https://doi.org/10.1351/goldbook.A00295 + ElectronProbeMicroanalysis + ElectronProbeMicroanalysis + Electron probe microanalysis (EPMA) is used for quantitative analysis of the elemental composition of solid specimens at a micrometer scale. The method uses bombardment of the specimen by keV electrons to excite characteristic X-rays from the sample, which are then detected by using wavelength-dispersive (WD) spectrometers. - - + + - TransferMolding - TransferMolding + An object that enables or facilitate an agent in the execution of a process that modifies the surrounding environment. + Tool + Tool + An object that enables or facilitate an agent in the execution of a process that modifies the surrounding environment. - - - - Painting - Painting + + + + Procedure to validate the characterisation data. + CharacterisationDataValidation + CharacterisationDataValidation + Procedure to validate the characterisation data. - - - - A manufacturing in which an adherent layer of amorphous material is applied to a workpiece. - CoatingManufacturing - DIN 8580:2020 - Beschichten - CoatingManufacturing - A manufacturing in which an adherent layer of amorphous material is applied to a workpiece. + + + + A material that takes active part in a chemical reaction. + ReactiveMaterial + ReactiveMaterial + A material that takes active part in a chemical reaction. - - - - - Rotation - Rotation - https://www.wikidata.org/wiki/Q76435127 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=102-05-22 - 3-16 + + + + ChemicallyDefinedMaterial + ChemicallyDefinedMaterial - - + + + + + + BeginTile + BeginTile + + + + - + - Perceived power of light. - LuminousFlux - LuminousFlux - http://qudt.org/vocab/quantitykind/LuminousFlux - 7-13 - Perceived power of light. - https://doi.org/10.1351/goldbook.L03646 + Describes elements' or compounds' readiness to form bonds. + AffinityOfAChemicalReaction + ChemicalAffinity + AffinityOfAChemicalReaction + https://qudt.org/vocab/quantitykind/ChemicalAffinity + https://www.wikidata.org/wiki/Q382783 + 9-30 + Describes elements' or compounds' readiness to form bonds. + https://doi.org/10.1351/goldbook.A00178 - - - - - - - 1 - - - - - - - 2 - - + + + + FormingJoin + FormingJoin + + + + + + + + + + + + + + + + + + + + + + A matter entity exclude the presence of (real) fundamental bosons parts. However, it implies the presence of virtual bosons that are responsible of the interactions between the (real) fundamental fermions. + A physical object made of fermionic quantum parts. + The interpretation of the term "matter" is not univocal. Several concepts are labelled with this term, depending on the field of science. The concept mass is sometimes related to the term "matter", even if the former refers to a physical quantity (precisely defined by modern physics) while the latter is a type that qualifies a physical entity. +It is possible to identify more than one concept that can be reasonably labelled with the term "matter". For example, it is possible to label as matter only the entities that are made up of atoms. Or more generally, we can be more fine-grained and call "matter" the entities that are made up of protons, neutrons or electrons, so that we can call matter also a neutron radiation or a cathode ray. +A more fundamental approach, that we embrace for the EMMO, considers matter as entities that are made of fermions (i.e. quarks and leptons). This would exclude particles like the W and Z bosons that possess some mass, but are not fermions. +Antimatter is a subclass of matter. + Matter + PhysicalSubstance + Matter + The interpretation of the term "matter" is not univocal. Several concepts are labelled with this term, depending on the field of science. The concept mass is sometimes related to the term "matter", even if the former refers to a physical quantity (precisely defined by modern physics) while the latter is a type that qualifies a physical entity. +It is possible to identify more than one concept that can be reasonably labelled with the term "matter". For example, it is possible to label as matter only the entities that are made up of atoms. Or more generally, we can be more fine-grained and call "matter" the entities that are made up of protons, neutrons or electrons, so that we can call matter also a neutron radiation or a cathode ray. +A more fundamental approach, that we embrace for the EMMO, considers matter as entities that are made of fermions (i.e. quarks and leptons). This would exclude particles like the W and Z bosons that possess some mass, but are not fermions. +Antimatter is a subclass of matter. + A physical object made of fermionic quantum parts. + A matter entity exclude the presence of (real) fundamental bosons parts. However, it implies the presence of virtual bosons that are responsible of the interactions between the (real) fundamental fermions. + Matter includes ordinary- and anti-matter. It is possible to have entities that are made of particle and anti-particles (e.g. mesons made of a quark and an anti-quark pair) so that it is possible to have entities that are somewhat heterogeneous with regards to this distinction. + + + + + + A direct part that is obtained by partitioning a whole purely in spatial parts. + SpatialTile + SpatialTile + A direct part that is obtained by partitioning a whole purely in spatial parts. + + + + + + + An object which is an holistic temporal part of a process. + Status + State + Status + An object which is an holistic temporal part of a process. + A semi-naked man is a status in the process of a man's dressing. + + + + + + + An object which is an holistic spatial part of a object. + Constituent + ObjectPart + Constituent + An object which is an holistic spatial part of a object. + A tire is a constituent of a car. + + + + + + Differential thermal analysis (DTA) is a thermoanalytic technique that is similar to differential scanning calorimetry. In DTA, the material under study and an inert reference are made to undergo identical thermal cycles, (i.e., same cooling or heating programme) while recording any temperature difference between sample and reference.[1] This differential temperature is then plotted against time, or against temperature (DTA curve, or thermogram). Changes in the sample, either exothermic or endothermic, can be detected relative to the inert reference. Thus, a DTA curve provides data on the transformations that have occurred, such as glass transitions, crystallization, melting and sublimation. The area under a DTA peak is the enthalpy change and is not affected by the heat capacity of the sample. + DifferentialThermalAnalysis + DTA + DifferentialThermalAnalysis + Differential thermal analysis (DTA) is a thermoanalytic technique that is similar to differential scanning calorimetry. In DTA, the material under study and an inert reference are made to undergo identical thermal cycles, (i.e., same cooling or heating programme) while recording any temperature difference between sample and reference.[1] This differential temperature is then plotted against time, or against temperature (DTA curve, or thermogram). Changes in the sample, either exothermic or endothermic, can be detected relative to the inert reference. Thus, a DTA curve provides data on the transformations that have occurred, such as glass transitions, crystallization, melting and sublimation. The area under a DTA peak is the enthalpy change and is not affected by the heat capacity of the sample. + + + + - An uncharged subatomic particle found in the atomic nucleus. - Neutron - Neutron - An uncharged subatomic particle found in the atomic nucleus. - https://en.wikipedia.org/wiki/Neutron + PhysicalyUnbonded + PhysicalyUnbonded - - - - A quantity obtained from a well-defined modelling procedure. - ModelledProperty - ModelledProperty - A quantity obtained from a well-defined modelling procedure. + + + + TransportationDevice + TransportationDevice - - - - Inverse of the magnetic flux quantum. - The DBpedia definition (http://dbpedia.org/page/Magnetic_flux_quantum) is outdated as May 20, 2019. It is now an exact quantity. - JosephsonConstant - JosephsonConstant - http://qudt.org/vocab/constant/JosephsonConstant - Inverse of the magnetic flux quantum. + + + + An object which is instrumental for reaching a particular purpose through its characteristic functioning process, with particular reference to mechanical or electronic equipment. + Device + Equipment + Machine + Device + An object which is instrumental for reaching a particular purpose through its characteristic functioning process, with particular reference to mechanical or electronic equipment. - - - - - - - - - - - - - Product of the number density na of the atoms and the cross section σ_tot for a given type of atoms - VolumicTotalCrossSection - MacroscopicTotalCrossSection - VolumicTotalCrossSection - https://qudt.org/vocab/quantitykind/MacroscopicTotalCrossSection - https://www.wikidata.org/wiki/Q98280548 - 10-42.2 - Product of the number density na of the atoms and the cross section σ_tot for a given type of atoms + + + + + BlueStrangeAntiQuark + BlueStrangeAntiQuark - - - - - T+4 L-1 M-1 I+2 Θ0 N0 J0 - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + BlueAntiQuark + BlueAntiQuark + + + + - CapacitancePerLengthUnit - CapacitancePerLengthUnit + Inverse of the impendance. + Admittance + ComplexAdmittance + Admittance + https://qudt.org/vocab/quantitykind/Admittance + https://www.wikidata.org/wiki/Q214518 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-51 + https://dbpedia.org/page/Admittance + 6-52.1 + Inverse of the impendance. - - - - - A estimation of a property using a functional icon. - Simulation - Modelling - Simulation - A estimation of a property using a functional icon. - I calculate the electrical conductivity of an Ar-He plasma with the Chapman-Enskog method and use the value as property for it. + + + + + In nuclear physics, fraction of interacting particles per distance traversed in a given material. + LinearAttenuationCoefficient + LinearAttenuationCoefficient + https://www.wikidata.org/wiki/Q98583077 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-04-31 + 10-49 + In nuclear physics, fraction of interacting particles per distance traversed in a given material. - - - - - + + - - + + + + + + - - Arithmetic average of (electric field strength multiplied by electric flux density) and (magnetic field strength multiplied by magnetic flux density) - ElectromagneticEnergyDensity - VolumicElectromagneticEnergy - ElectromagneticEnergyDensity - https://qudt.org/vocab/quantitykind/ElectromagneticEnergyDensity - https://www.wikidata.org/wiki/Q77989624 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-65 - 6-33 - Arithmetic average of (electric field strength multiplied by electric flux density) and (magnetic field strength multiplied by magnetic flux density) - - - - - - Heat capacity at constant pressure. - IsobaricHeatCapacity - HeatCapacityAtConstantPressure - IsobaricHeatCapacity - https://www.wikidata.org/wiki/Q112187490 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-49 - 5-16.2 - Heat capacity at constant pressure. + + Any physical or virtual component of limited availability within a computer system. + SystemResource + Resource + SystemResource + Any physical or virtual component of limited availability within a computer system. - - - - - + + + + + + + + + + + - - + + + + + + - - Ngative quotient of Gibbs energy and temperature. - PlanckFunction - PlanckFunction - https://qudt.org/vocab/quantitykind/PlanckFunction - https://www.wikidata.org/wiki/Q76364998 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-25 - 5-23 - Ngative quotient of Gibbs energy and temperature. + + Semiotic subclasse are defined using Peirce's semiotic theory. + +"Namely, a sign is something, A, which brings something, B, its interpretant sign determined or created by it, into the same sort of correspondence with something, C, its object, as that in which itself stands to C." (Peirce 1902, NEM 4, 20–21). + +The triadic elements: +- 'sign': the sign A (e.g. a name) +- 'interpretant': the sign B as the effects of the sign A on the interpreter (e.g. the mental concept of what a name means) +- 'object': the object C (e.g. the entity to which the sign A and B refer to) + +This class includes also the 'interpeter' i.e. the entity that connects the 'sign' to the 'object' + The class of individuals that stands for semiotic objects, i.e. objects that take part on a semiotic process. + SemioticEntity + SemioticEntity + The class of individuals that stands for semiotic objects, i.e. objects that take part on a semiotic process. - - - - Product of force and displacement. - Work - Work - http://qudt.org/vocab/quantitykind/Work - Product of force and displacement. - 4-28.4 - https://doi.org/10.1351/goldbook.W06684 + + + + Forming of vessel parts from a flat mould into a three-dimensional shape by means of a press and tools, whereby material is neither removed nor added + DeepDrawing + Tiefziehen + DeepDrawing - + + + + + + + + + + + + + + + + + + + + + + + + + @@ -13913,108 +12312,135 @@ While the string "1 kg" is a 'QuantityValue'. - + - A conventional that provides no possibility to infer the characteristics of the object to which it refers. - Uncoded - Uncoded - A conventional that provides no possibility to infer the characteristics of the object to which it refers. - A random generated id for a product. - + A conventional referring to an object according to a specific code that reflects the results of a specific interaction mechanism and is shared between other interpreters. +A coded is always a partial representation of an object since it reflects the object capability to be part of a specific determination. +A coded is a sort of name or label that we put upon objects that interact with an determiner in the same specific way. - - - - Confocal microscopy, most frequently confocal laser scanning microscopy (CLSM) or laser scanning confocal microscopy (LSCM), is an optical imaging technique for increasing optical resolution and contrast of a micrograph by means of using a spatial pinhole to block out-of-focus light in image formation. - - ConfocalMicroscopy - ConfocalMicroscopy - Confocal microscopy, most frequently confocal laser scanning microscopy (CLSM) or laser scanning confocal microscopy (LSCM), is an optical imaging technique for increasing optical resolution and contrast of a micrograph by means of using a spatial pinhole to block out-of-focus light in image formation. +For example, "hot" objects are objects that interact with an observer through a perception mechanism aimed to perceive an heat source. The code is made of terms such as "hot", "warm", "cold", that commonly refer to the perception of heat. + A conventional that stands for an object according to a code of interpretation to which the interpreter refers. + Let's define the class Colour as the subclass of the coded signs that involve photon emission and electromagnetic radiation sensible observers. +An individual C of this class Colour can be defined be declaring the process individual (e.g. daylight illumination) and the observer (e.g. my eyes) +Stating that an entity E hasCoded C, we mean that it can be observed by such setup of process + observer (i.e. observed by my eyes under daylight). +This definition can be specialised for human eye perception, so that the observer can be a generic human, or to camera perception so that the observer can be a device. +This can be used in material characterization, to define exactly the type of measurement done, including the instrument type. + Coded + Coded + A conventional that stands for an object according to a code of interpretation to which the interpreter refers. + A biography that makes use of a code that is provided by the meaning of the element of the language used by the author. + The name "red" that stands for the color of an object. - - - - + + + + + + + + + + - - + + + + + + - - A process occurring with the active participation of an agent that drives the process according to a specific objective (intention). - IntentionalProcess - Project - IntentionalProcess - A process occurring with the active participation of an agent that drives the process according to a specific objective (intention). + + A 'Sign' that stands for an 'Object' through convention, norm or habit, without any resemblance to it. + In Peirce semiotics this kind of sign category is called symbol. However, since symbol is also used in formal languages, the name is changed in conventional. + Conventional + Conventional + A 'Sign' that stands for an 'Object' through convention, norm or habit, without any resemblance to it. - - - - A technique used to obtain an infrared spectrum of absorption or emission of a solid, liquid, or gas - - FourierTransformInfraredSpectroscopy - FTIR - FourierTransformInfraredSpectroscopy - https://www.wikidata.org/wiki/Q901559 - A technique used to obtain an infrared spectrum of absorption or emission of a solid, liquid, or gas - https://en.wikipedia.org/wiki/Fourier-transform_infrared_spectroscopy + + + + + T0 L-3 M0 I0 Θ0 N0 J0 + + + + + PerVolumeUnit + PerVolumeUnit + + + + + + Forming of a solid body, whereby the plastic state is essentially brought about by a bending stress. + FlexuralForming + Biegeumformen + FlexuralForming - - - - A variable is a symbolic object that stands for any other mathematical object, such as number, a vector, a matrix, a function, the argument of a function, a set, an element of a set. - Variable - Variable - A variable is a symbolic object that stands for any other mathematical object, such as number, a vector, a matrix, a function, the argument of a function, a set, an element of a set. - x -k + + + + A semiotic object that is recognised by an interpreter (a cogniser) when establishing a connection between the object and an icon. + Cognised + Cognised + A semiotic object that is recognised by an interpreter (a cogniser) when establishing a connection between the object and an icon. + A physical phenomenon that is connected to an equation by a scientist. - - - - - T+3 L-1 M-1 I0 Θ0 N0 J+1 - - - - - LuminousEfficacyUnit - LuminousEfficacyUnit + + + + A meson with total spin 1 and odd parit. + VectorMeson + VectorMeson + A meson with total spin 1 and odd parit. + https://en.wikipedia.org/wiki/Vector_meson - - - - - For a particle, electric charge q divided by elementary charge e. - The charge number of a particle may be presented as a superscript to the symbol of that particle, e.g. H+, He++, Al3+, Cl−, S=, N3−. - The charge number of an electrically charged particle can be positive or negative. The charge number of an electrically neutral particle is zero. - ChargeNumber - IonizationNumber - ChargeNumber - https://qudt.org/vocab/quantitykind/ChargeNumber - https://www.wikidata.org/wiki/Q1800063 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-05-17 - https://dbpedia.org/page/Charge_number - 10-5.2 - For a particle, electric charge q divided by elementary charge e. - https://en.wikipedia.org/wiki/Charge_number - https://doi.org/10.1351/goldbook.C00993 + + + + PlasticModeling + PlasticModeling - + + Fatigue testing is a specialised form of mechanical testing that is performed by applying cyclic loading to a coupon or structure. These tests are used either to generate fatigue life and crack growth data, identify critical locations or demonstrate the safety of a structure that may be susceptible to fatigue. - ShearOrTorsionTesting - ShearOrTorsionTesting + FatigueTesting + FatigueTesting + Fatigue testing is a specialised form of mechanical testing that is performed by applying cyclic loading to a coupon or structure. These tests are used either to generate fatigue life and crack growth data, identify critical locations or demonstrate the safety of a structure that may be susceptible to fatigue. + + + + + + + + + + + + + + + Coefficient in the law of recombination, + RecombinationCoefficient + RecombinationCoefficient + https://qudt.org/vocab/quantitykind/RecombinationCoefficient + https://www.wikidata.org/wiki/Q98842099 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-06-47 + 10-63 + Coefficient in the law of recombination, @@ -14038,1290 +12464,1445 @@ k Number of electrons in conduction band per volume. - - - - - Quotient of the total number of fission or fission-dependent neutrons produced in the duration of a time interval and the total number of neutrons lost by absorption and leakage in that duration. - MultiplicationFactor - MultiplicationFactor - https://qudt.org/vocab/quantitykind/MultiplicationFactor - https://www.wikidata.org/wiki/Q99440471 - 10-78.1 - Quotient of the total number of fission or fission-dependent neutrons produced in the duration of a time interval and the total number of neutrons lost by absorption and leakage in that duration. + + + + "Ordinal quantities, such as Rockwell C hardness, are usually not considered to be part of a system of quantities because they are related to other quantities through empirical relations only." +International vocabulary of metrology (VIM) + "Quantity, defined by a conventional measurement procedure, for which a total ordering relation can be established, according to magnitude, with other quantities of the same kind, but for which no algebraic operations among those quantities exist" +International vocabulary of metrology (VIM) + OrdinalQuantity + OrdinalQuantity + "Quantity, defined by a conventional measurement procedure, for which a total ordering relation can be established, according to magnitude, with other quantities of the same kind, but for which no algebraic operations among those quantities exist" +International vocabulary of metrology (VIM) + Hardness +Resilience + ordinal quantity - - + + - LiquidPhaseSintering - ISO 3252:2019 Powder metallurgy -liquid-phase sintering: sintering of a powder or compact containing at least two constituents, under conditions such that a liquid phase is formed - LiquidPhaseSintering + Molds + Molds - - - + + + + - - + + - - Process representing the interaction between the Probe and the Sample (with a certain Interaction Volume) which generates a Signal - - ProbeSampleInteraction - ProbeSampleInteraction - Process representing the interaction between the Probe and the Sample (with a certain Interaction Volume) which generates a Signal + + A fundamental physical constant characterizing the strength of the electromagnetic interaction between elementary charged particles. + FineStructureConstant + FineStructureConstant + http://qudt.org/vocab/constant/FineStructureConstant + https://doi.org/10.1351/goldbook.F02389 - - - - Application of a post-processing model to signals through a software, in order to calculate the final characterisation property. - - MeasurementDataPostProcessing - MeasurementDataPostProcessing - Application of a post-processing model to signals through a software, in order to calculate the final characterisation property. - Analysis of SEM (or optical) images to gain additional information (image filtering/integration/averaging, microstructural analysis, grain size evaluation, Digital Image Correlation procedures, etc.) - In nanoindentation testing, this is the Oliver-Pharr method, which allows calculating the elastic modulus and hardness of the sample by using the load and depth measured signals. + + + + + + + + + + + + + Increase in the rate of reaction of a specified chemical reaction that an enzyme produces in a specific assay system. + CatalyticActivity + CatalyticActivity + http://qudt.org/vocab/quantitykind/CatalyticActivity + Increase in the rate of reaction of a specified chemical reaction that an enzyme produces in a specific assay system. + https://doi.org/10.1351/goldbook.C00881 - + + + + + + + + + + + + + translation vector that maps the crystal lattice on itself + LatticeVector + LatticeVector + https://qudt.org/vocab/quantitykind/LatticeVector + https://www.wikidata.org/wiki/Q105435234 + 12-1.1 + translation vector that maps the crystal lattice on itself + + + + + + vector quantity between any two points in space + Displacement + Displacement + https://qudt.org/vocab/quantitykind/Displacement + https://www.wikidata.org/wiki/Q190291 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-01-29 + https://dbpedia.org/page/Displacement_(geometry) + 3-1.11 + vector quantity between any two points in space + https://en.wikipedia.org/wiki/Displacement_(geometry) + + + + + + Inverse of the magnetic flux quantum. + The DBpedia definition (http://dbpedia.org/page/Magnetic_flux_quantum) is outdated as May 20, 2019. It is now an exact quantity. + JosephsonConstant + JosephsonConstant + http://qudt.org/vocab/constant/JosephsonConstant + Inverse of the magnetic flux quantum. + + + - Evaluation of quality indicators to determine how well suited a data set is to be used for the characterisation of a material. - - DataQuality - DataQuality - Evaluation of quality indicators to determine how well suited a data set is to be used for the characterisation of a material. - Example evaluation of S/N ratio, or other quality indicators (limits of detection/quantification, statistical analysis of data, data robustness analysis) + Person + Person - - - - + + - Amount of heat through a surface during a time interval divided by the duration of this interval. - HeatFlowRate - HeatFlowRate - https://qudt.org/vocab/quantitykind/HeatFlowRate - https://www.wikidata.org/wiki/Q12160631 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-36 - 5-7 - Amount of heat through a surface during a time interval divided by the duration of this interval. + A 'Mathematical' that has no unknown value, i.e. all its 'Variable"-s parts refers to a 'Number' (for scalars that have a built-in datatype) or to another 'Numerical' (for complex numerical data structures that should rely on external implementations). + Numerical + Numerical + A 'Mathematical' that has no unknown value, i.e. all its 'Variable"-s parts refers to a 'Number' (for scalars that have a built-in datatype) or to another 'Numerical' (for complex numerical data structures that should rely on external implementations). + + + + + + CSharp + C# + CSharp - - - + + + + CompiledLanguage + CompiledLanguage + + + + + + + + + + + + - At a fixed point in a medium, the direction of propagation of heat is opposite to the temperature gradient. At a point on the surface separating two media with different temperatures, the direction of propagation of heat is normal to the surface, from higher to lower temperatures. - Vector quantity with magnitude equal to the heat flow rate dΦ through a surface element divided by the area dA of the element, and direction eφ in the direction of propagation of heat. - DensityOfHeatFlowRate - AreicHeatFlowRate - DensityOfHeatFlowRate - https://www.wikidata.org/wiki/Q1478382 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-37 - 5-8 - Vector quantity with magnitude equal to the heat flow rate dΦ through a surface element divided by the area dA of the element, and direction eφ in the direction of propagation of heat. - https://doi.org/10.1351/goldbook.H02755 + The total luminous flux incident on a surface, per unit area. + Illuminance + Illuminance + http://qudt.org/vocab/quantitykind/Illuminance + The total luminous flux incident on a surface, per unit area. + https://doi.org/10.1351/goldbook.I02941 - - + + + + AmorphousMaterial + NonCrystallineMaterial + AmorphousMaterial + + + + - Continuous or stepwise pressure forming with one or more rotating tools (rollers), without or with additional tools, e.g. plugs or mandrels, rods, guide tools - Rolling - Walzen - Rolling + PhotochemicalProcesses + PhotochemicalProcesses - - - - Relative change of length per change of temperature. - LinearExpansionCoefficient - LinearExpansionCoefficient - https://qudt.org/vocab/quantitykind/LinearExpansionCoefficient - https://www.wikidata.org/wiki/Q74760821 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-27 - 5-3.1 - Relative change of length per change of temperature. + + + + Data that are expressed through quantum mechanical principles, and that can have several values ​​/ be in several states in the same place at the same time (quantum superposition), each of them with a certain probability. + QuantumData + QuantumData + Data that are expressed through quantum mechanical principles, and that can have several values ​​/ be in several states in the same place at the same time (quantum superposition), each of them with a certain probability. - + + + + + A coarse dispersion of gas in a liquid continuum phase. + LiquidGasSuspension + LiquidGasSuspension + A coarse dispersion of gas in a liquid continuum phase. + Sparkling water + + + + + - - + - Material property which describes how the size of an object changes with a change in temperature. - CoefficientOfThermalExpansion - ThermalExpansionCoefficient - CoefficientOfThermalExpansion - https://www.wikidata.org/wiki/Q45760 - Material property which describes how the size of an object changes with a change in temperature. + Measure for the energy lost by charged particles per traversed distance, including only interactions up to a given energy. + LinearEnergyTransfer + LinearEnergyTransfer + https://qudt.org/vocab/quantitykind/LinearEnergyTransfer + https://www.wikidata.org/wiki/Q1699996 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-30 + 10-85 + Measure for the energy lost by charged particles per traversed distance, including only interactions up to a given energy. + https://doi.org/10.1351/goldbook.L03550 - - - - A software application to process characterisation data - - CharacterisationSoftware - CharacterisationSoftware - A software application to process characterisation data - In Nanoindentation post-processing the software used to apply the Oliver-Pharr to calculate the characterisation properties (i.e. elastic modulus, hardness) from load and depth data. + + + + FromWorkPIecetoWorkPiece + FromWorkPIecetoWorkPiece - - - - Fatigue testing is a specialised form of mechanical testing that is performed by applying cyclic loading to a coupon or structure. These tests are used either to generate fatigue life and crack growth data, identify critical locations or demonstrate the safety of a structure that may be susceptible to fatigue. - - FatigueTesting - FatigueTesting - Fatigue testing is a specialised form of mechanical testing that is performed by applying cyclic loading to a coupon or structure. These tests are used either to generate fatigue life and crack growth data, identify critical locations or demonstrate the safety of a structure that may be susceptible to fatigue. + + + + + T0 L+6 M0 I0 Θ0 N0 J0 + + + + + SexticLengthUnit + SexticLengthUnit - - - - A computer language that is domain-independent and can be used for expressing data from any kind of discipline. - DataExchangeLanguage - DataExchangeLanguage - A computer language that is domain-independent and can be used for expressing data from any kind of discipline. - JSON, YAML, XML - https://en.wikipedia.org/wiki/Data_exchange#Data_exchange_languages + + + + DataProcessingApplication + DataProcessingApplication - - + + - A formal language used to communicate with a computer. - The categorisation of computer languages is based on - -Guide to the Software Engineering Body of Knowledge (SWEBOK(R)): Version 3.0, January 2014. Editors Pierre Bourque, Richard E. Fairley. Publisher: IEEE Computer Society PressWashingtonDCUnited States. ISBN:978-0-7695-5166-1. -https://www.computer.org/education/bodies-of-knowledge/software-engineering - ComputerLanguage - ComputerLanguage - A formal language used to communicate with a computer. - The categorisation of computer languages is based on + A program aimed to provide a specific high level function to the user, usually hiding lower level procedures. + ApplicationProgram + App + Application + ApplicationProgram + A program aimed to provide a specific high level function to the user, usually hiding lower level procedures. + Word processors, graphic image processing programs, database management systems, numerical simulation software and games. + -Guide to the Software Engineering Body of Knowledge (SWEBOK(R)): Version 3.0, January 2014. Editors Pierre Bourque, Richard E. Fairley. Publisher: IEEE Computer Society PressWashingtonDCUnited States. ISBN:978-0-7695-5166-1. -https://www.computer.org/education/bodies-of-knowledge/software-engineering - https://en.wikipedia.org/wiki/Computer_language + + + + TransientLiquidPhaseSintering + TransientLiquidPhaseSintering - - - - - ScatteringAndDiffraction - ScatteringAndDiffraction + + + + A single phase mixture. + PhaseHomogeneousMixture + PhaseHomogeneousMixture + A single phase mixture. - - - - electrochemical method that applies current pulses to an electrochemical cell at rest and measures the voltage response - - GalvanostaticIntermittentTitrationTechnique - GITT - GalvanostaticIntermittentTitrationTechnique - https://www.wikidata.org/wiki/Q120906986 - electrochemical method that applies current pulses to an electrochemical cell at rest and measures the voltage response + + + + A Miixture is a material made up of two or more different substances which are physically (not chemically) combined. + Mixture + Mixture + A Miixture is a material made up of two or more different substances which are physically (not chemically) combined. - - - - The class of causal objects that stand for world objects according to a specific representational perspective. - This class is the practical implementation of the EMMO pluralistic approach for which the only objective categorization is provided by the Universe individual and all the Quantum individuals. -Between these two extremes, there are several subjective ways to categorize real world objects, each one provide under a 'Perspective' subclass. - Perspective - Perspective - The class of causal objects that stand for world objects according to a specific representational perspective. - This class is the practical implementation of the EMMO pluralistic approach for which the only objective categorization is provided by the Universe individual and all the Quantum individuals. -Between these two extremes, there are several subjective ways to categorize real world objects, each one provide under a 'Perspective' subclass. + + + + + + + + + + A workflow whose steps (iterative steps) are the repetition of the same workflow type. + IterativeWorkflow + IterativeWorkflow + A workflow whose steps (iterative steps) are the repetition of the same workflow type. - - - - - - - - - - - - - - - AntiLepton - AntiLepton + + + + + A workflow whose tasks are tiles of a sequence. + SerialWorkflow + SerialWorkflow + A workflow whose tasks are tiles of a sequence. - - - - GluonType4 - GluonType4 + + + + KineticFrictionFactor + DynamicFrictionFactor + KineticFrictionFactor + https://www.wikidata.org/wiki/Q73695445 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-32 + 4-23.2 - - + + + + Ratio of void volume and total volume of a porous material. + Porosity + Porosity + https://www.wikidata.org/wiki/Q622669 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=801-31-32 + Ratio of void volume and total volume of a porous material. + https://doi.org/10.1351/goldbook.P04762 + + + + + - Mathematical model used to process data. - The PostProcessingModel use is mainly intended to get secondary data from primary data. + Electron backscatter diffraction (EBSD) is a scanning electron microscopy (SEM) technique used to study the crystallographic structure of materials. EBSD is carried out in a scanning electron microscope equipped with an EBSD detector comprising at least a phosphorescent screen, a compact lens and a low-light camera. In this configuration, the SEM incident beam hits the tilted sample. As backscattered electrons leave the sample, they interact with the crystal's periodic atomic lattice planes and diffract according to Bragg's law at various scattering angles before reaching the phosphor screen forming Kikuchi patterns (EBSPs). EBSD spatial resolution depends on many factors, including the nature of the material under study and the sample preparation. Thus, EBSPs can be indexed to provide information about the material's grain structure, grain orientation, and phase at the micro-scale. EBSD is applied for impurities and defect studies, plastic deformation, and statistical analysis for average misorientation, grain size, and crystallographic texture. EBSD can also be combined with energy-dispersive X-ray spectroscopy (EDS), cathodoluminescence (CL), and wavelength-dispersive X-ray spectroscopy (WDS) for advanced phase identification and materials discovery. - PostProcessingModel - PostProcessingModel - Mathematical model used to process data. - The PostProcessingModel use is mainly intended to get secondary data from primary data. + ElectronBackscatterDiffraction + EBSD + ElectronBackscatterDiffraction + Electron backscatter diffraction (EBSD) is a scanning electron microscopy (SEM) technique used to study the crystallographic structure of materials. EBSD is carried out in a scanning electron microscope equipped with an EBSD detector comprising at least a phosphorescent screen, a compact lens and a low-light camera. In this configuration, the SEM incident beam hits the tilted sample. As backscattered electrons leave the sample, they interact with the crystal's periodic atomic lattice planes and diffract according to Bragg's law at various scattering angles before reaching the phosphor screen forming Kikuchi patterns (EBSPs). EBSD spatial resolution depends on many factors, including the nature of the material under study and the sample preparation. Thus, EBSPs can be indexed to provide information about the material's grain structure, grain orientation, and phase at the micro-scale. EBSD is applied for impurities and defect studies, plastic deformation, and statistical analysis for average misorientation, grain size, and crystallographic texture. EBSD can also be combined with energy-dispersive X-ray spectroscopy (EDS), cathodoluminescence (CL), and wavelength-dispersive X-ray spectroscopy (WDS) for advanced phase identification and materials discovery. - - - - - A number individual provides the link between the ontology and the actual data, through the data property hasNumericalValue. - A number is actually a string (e.g. 1.4, 1e-8) of numerical digits and other symbols. However, in order not to increase complexity of the taxonomy and relations, here we take a number as an "atomic" object, without decomposit it in digits (i.e. we do not include digits in the EMMO as alphabet for numbers). - A numerical data value. - In math usually number and numeral are distinct concepts, the numeral being the symbol or a composition of symbols (e.g. 3.14, 010010, three) and the number is the idea behind it. -More than one numeral stands for the same number. -In the EMMO abstract entities do not exists, and numbers are simply defined by other numerals, so that a number is the class of all the numerals that are equivalent (e.g. 3 and 0011 are numerals that stands for the same number). -Or alternatively, an integer numeral may also stands for a set of a specific cardinality (e.g. 3 stands for a set of three apples). Rational and real numbers are simply a syntactic arrangment of integers (digits, in decimal system). -The fact that you can't give a name to a number without using a numeral or, in case of positive integers, without referring to a real world objects set with specific cardinality, suggests that the abstract concept of number is not a concept that can be practically used. -For these reasons, the EMMO will consider numerals and numbers as the same concept. - Number - Numeral - Number - A numerical data value. + + + + The scanning electron microscope (SEM) uses a focused beam of high-energy electrons to generate a variety of signals at the surface of solid specimens. The signals that derive from electron-sample interactions reveal information about the sample including external morphology (texture), chemical composition, and crystalline structure and orientation of materials making up the sample. + + ScanningElectronMicroscopy + SEM + ScanningElectronMicroscopy + The scanning electron microscope (SEM) uses a focused beam of high-energy electrons to generate a variety of signals at the surface of solid specimens. The signals that derive from electron-sample interactions reveal information about the sample including external morphology (texture), chemical composition, and crystalline structure and orientation of materials making up the sample. - - + + - method of electroanalytical chemistry used to separate by electrolyse ions of a substance and to derive the amount of this substance from the increase in mass of an electrode. - Electrogravimetry - Electrogravimetry - https://www.wikidata.org/wiki/Q902953 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-04-14 - method of electroanalytical chemistry used to separate by electrolyse ions of a substance and to derive the amount of this substance from the increase in mass of an electrode. - https://en.wikipedia.org/wiki/Electrogravimetry + ScatteringAndDiffraction + ScatteringAndDiffraction - - - - - - - - - - - - - - - - A chausal chain whose quantum parts are of the same standard model fundamental type. - An elementary particle is a causal chain of quantum entities of the same type. For example, an elementary electron is a sequence of fundamental electrons only. - ElementaryParticle - SingleParticleChain - ElementaryParticle - An elementary particle is a causal chain of quantum entities of the same type. For example, an elementary electron is a sequence of fundamental electrons only. - A chausal chain whose quantum parts are of the same standard model fundamental type. + + + + + + + + + + + + + Inverse of 'ElectricalConductance'. + Measure of the difficulty to pass an electric current through a material. + ElectricResistance + Resistance + ElectricResistance + http://qudt.org/vocab/quantitykind/Resistance + https://www.wikidata.org/wiki/Q25358 + 6-46 + Measure of the difficulty to pass an electric current through a material. + https://doi.org/10.1351/goldbook.E01936 - - - - - - - - - - - - - - - A well defined physical entity, elementary or composite, usually treated as a singular unit, that is found at scales spanning from the elementary particles to molecules, as fundamental constituents of larger scale substances (as the etymology of "particle" suggests). - The scope of the physical particle definition goes from the elementary particles to molecules, as fundamental constituents of substances. - The union of hadron and lepton, or fermion and bosons. - PhysicalParticle - Particle - PhysicalParticle - The union of hadron and lepton, or fermion and bosons. - A well defined physical entity, elementary or composite, usually treated as a singular unit, that is found at scales spanning from the elementary particles to molecules, as fundamental constituents of larger scale substances (as the etymology of "particle" suggests). - The scope of the physical particle definition goes from the elementary particles to molecules, as fundamental constituents of substances. + + + + A discrete schema may be based on a continuum material basis that is filtered according to its variations. For example, a continuous voltage based signal can be considered 1 or 0 according to some threshold. +Discrete does not mean tha the material basis is discrete, but that the data are encoded according to such step-based rules. + Data whose variations are decoded according to a discrete schema. + DiscreteData + DiscreteData + Data whose variations are decoded according to a discrete schema. + A text is a collection of discrete symbols. A compact disc is designed to host discrete states in the form of pits and lands. + A discrete schema may be based on a continuum material basis that is filtered according to its variations. For example, a continuous voltage based signal can be considered 1 or 0 according to some threshold. +Discrete does not mean tha the material basis is discrete, but that the data are encoded according to such step-based rules. - - - - Unit for quantities of dimension one that are the fraction of two masses. - MassFractionUnit - MassFractionUnit - Unit for quantities of dimension one that are the fraction of two masses. - Unit for mass fraction. + + + + + T0 L-1 M0 I0 Θ+1 N0 J0 + + + + + TemperaturePerLengthUnit + TemperaturePerLengthUnit - - + + + - The number of waves per unit length along the direction of propagation. - Wavenumber - Wavenumber - http://qudt.org/vocab/quantitykind/Wavenumber - 3-18 - https://doi.org/10.1351/goldbook.W06664 + The amount of a constituent divided by the total amount of all constituents in a mixture. + AmountFraction + MoleFraction + AmountFraction + http://qudt.org/vocab/quantitykind/MoleFraction + The amount of a constituent divided by the total amount of all constituents in a mixture. + https://doi.org/10.1351/goldbook.A00296 - - - + - + + + Faction of electrical current carried by given ionic species. + IonTransportNumber + CurrentFraction + TransferrenceNumber + IonTransportNumber + https://qudt.org/vocab/quantitykind/IonTransportNumber + https://www.wikidata.org/wiki/Q331854 + 9-46 + Faction of electrical current carried by given ionic species. + https://doi.org/10.1351/goldbook.I03181 + https://doi.org/10.1351/goldbook.T06489 + + + + - - + + / - - Mass per amount of substance. - MolarMass - MolarMass - https://qudt.org/vocab/quantitykind/MolarMass - https://www.wikidata.org/wiki/Q145623 - 9-4 - Mass per amount of substance. + + Division + Division - - + + - Person - Person - - - - - - The superclass for all physical quantities classes that are categorized according to some domain of interests (e.g. metallurgy, chemistry), property (intensive/extensive) or application. - CategorizedPhysicalQuantity - https://physics.nist.gov/cuu/Constants - CategorizedPhysicalQuantity - The superclass for all physical quantities classes that are categorized according to some domain of interests (e.g. metallurgy, chemistry), property (intensive/extensive) or application. + In the membrane osmometry technique, a pure solvent and polymer solution are separated by a semipermeable membrane, due to the higher chemical potential of the solvent in the pure solvent than in polymer solution, the solvent starts moving towards the polymer solution. + + MembraneOsmometry + MembraneOsmometry + In the membrane osmometry technique, a pure solvent and polymer solution are separated by a semipermeable membrane, due to the higher chemical potential of the solvent in the pure solvent than in polymer solution, the solvent starts moving towards the polymer solution. - - + + + + + + + - - T0 L+4 M0 I0 Θ0 N0 J0 + + - - + - QuarticLengthUnit - QuarticLengthUnit + "In the name “amount of substance”, the word “substance” will typically be replaced by words to specify the substance concerned in any particular application, for example “amount of hydrogen chloride, HCl”, or “amount of benzene, C6H6 ”. It is important to give a precise definition of the entity involved (as emphasized in the definition of the mole); this should preferably be done by specifying the molecular chemical formula of the material involved. Although the word “amount” has a more general dictionary definition, the abbreviation of the full name “amount of substance” to “amount” may be used for brevity." + +-- SI Brochure + The number of elementary entities present. + AmountOfSubstance + AmountOfSubstance + http://qudt.org/vocab/quantitykind/AmountOfSubstance + 9-2 + The number of elementary entities present. + https://doi.org/10.1351/goldbook.A00297 - - + + + - The imaginary part of the impedance. - The opposition of a circuit element to a change in current or voltage, due to that element's inductance or capacitance. - ElectricReactance - Reactance - ElectricReactance - http://qudt.org/vocab/quantitykind/Reactance - https://www.wikidata.org/wiki/Q193972 - 6-51.3 - The imaginary part of the impedance. - https://en.wikipedia.org/wiki/Electrical_reactance - https://doi.org/10.1351/goldbook.R05162 + Atomic number (proton number) plus neutron number equals mass number. + Number of neutrons in an atomic nucleus. + NeutronNumber + NeutronNumber + https://www.wikidata.org/wiki/Q970319 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-05-34 + 10-1.2 + Number of neutrons in an atomic nucleus. + Atomic number (proton number) plus neutron number equals mass number. + https://en.wikipedia.org/wiki/Neutron_number + https://doi.org/10.1351/goldbook.N04119 - - - - - Mass of the contained water vapour per volume. - AbsoluteHumidity - MassConcentrationOfWaterVapour - AbsoluteHumidity - https://qudt.org/vocab/quantitykind/AbsoluteHumidity - https://qudt.org/vocab/quantitykind/MassConcentrationOfWaterVapour - https://www.wikidata.org/wiki/Q76378808 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-60 - 5-28 - Mass of the contained water vapour per volume. + + + + Chronopotentiometry where the change in applied current undergoes a cyclic current reversal. + CyclicChronopotentiometry + CyclicChronopotentiometry + Chronopotentiometry where the change in applied current undergoes a cyclic current reversal. + chronopotentiometry where the change in applied current undergoes a cyclic current reversal - - - - - The DBpedia definition (http://dbpedia.org/page/Vacuum_permittivity) is outdated since May 20, 2019. It is now a measured constant. - The value of the absolute dielectric permittivity of classical vacuum. - VacuumElectricPermittivity - PermittivityOfVacuum - VacuumElectricPermittivity - http://qudt.org/vocab/constant/PermittivityOfVacuum - 6-14.1 - https://doi.org/10.1351/goldbook.P04508 + + + + Potentiometry in which the potential is measured with time following a change in applied current. The change in applied current is usually a step, but cyclic current reversals or linearly increasing currents are also used. + Chronopotentiometry + Chronopotentiometry + Potentiometry in which the potential is measured with time following a change in applied current. The change in applied current is usually a step, but cyclic current reversals or linearly increasing currents are also used. + https://doi.org/10.1515/pac-2018-0109 - - - - - - - - - - - - - - - - A boolean number. - Boolean - Boolean - A boolean number. + + + + Observed + Observed + The biography of a person met by the author. - - - - A declaration that provides a sign for an object that is independent from any assignment rule. - Naming - Naming - A declaration that provides a sign for an object that is independent from any assignment rule. - A unique id attached to an entity. + + + + An icon that focusing WHAT the object does. + An icon that imitates one representative character of the object. It share external similarities with the object, but not necessarily the same internal logical structure. + This subclass of icon inspired by Peirceian category (c) the metaphor, which represents the representative character of a sign by representing a parallelism in something else. + FunctionalIcon + FunctionalIcon + An icon that imitates one representative character of the object. It share external similarities with the object, but not necessarily the same internal logical structure. + A data based model is only a functional icon, since it provide the same relations between the properties of the object (e.g., it can predict some properties as function of others) but is not considering the internal mechanisms (i.e., it can ignore the physics). + A guinea pig. + An icon that focusing WHAT the object does. - - + + - - - - - - + + + + + + + + - - Set of physics principles (and associated governing equations) that describes the interaction between the sample and the probe. - - PhysicsOfInteraction - PhysicsOfInteraction - Set of physics principles (and associated governing equations) that describes the interaction between the sample and the probe. - In x-ray diffraction, this is represented by the set of physics equations that describe the relation between the incident x-ray beam and the diffracted beam (the most simple form for this being the Bragg’s law). + + An interpreter who establish the connection between an icon an an object recognizing their resemblance (e.g. logical, pictorial) + Cogniser + Cogniser + An interpreter who establish the connection between an icon an an object recognizing their resemblance (e.g. logical, pictorial) + The scientist that connects an equation to a physical phenomenon. - - - - - Average distance that electrons travel between two successive interactions. - MeanFreePathOfElectrons - MeanFreePathOfElectrons - https://qudt.org/vocab/quantitykind/ElectronMeanFreePath - https://www.wikidata.org/wiki/Q105672307 - 12-15.2 - Average distance that electrons travel between two successive interactions. + + + + + + + + + + + + + + + + + + + + + AntiNeutrinoType + AntiNeutrinoType - - - + + + + + T-2 L+2 M+1 I0 Θ-1 N-1 J0 + + + - Quotient of relative mass excess and the nucleon number. - PackingFraction - PackingFraction - https://qudt.org/vocab/quantitykind/PackingFraction - https://www.wikidata.org/wiki/Q98058276 - 10-23.1 - Quotient of relative mass excess and the nucleon number. + EntropyPerAmountUnit + EntropyPerAmountUnit - - + + + + + + + + + + - Vector quantity equal to the time derivative of the electric flux density. - DisplacementCurrentDensity - DisplacementCurrentDensity - https://qudt.org/vocab/quantitykind/DisplacementCurrentDensity - https://www.wikidata.org/wiki/Q77614612 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-42 - 6-18 - Vector quantity equal to the time derivative of the electric flux density. + Energy per amount of substance. + MolarEnergy + MolarEnergy + https://qudt.org/vocab/quantitykind/MolarEnergy + https://www.wikidata.org/wiki/Q69427512 + Energy per amount of substance. - - - - + + + - - - - + + - - Electric current divided by the cross-sectional area it is passing through. - ElectricCurrentDensity - AreicElectricCurrent - CurrentDensity - ElectricCurrentDensity - http://qudt.org/vocab/quantitykind/ElectricCurrentDensity - https://www.wikidata.org/wiki/Q234072 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-11 - 6-8 - https://en.wikipedia.org/wiki/Current_density - https://doi.org/10.1351/goldbook.E01928 + + A causal object that is tessellated in direct parts. + A tessellation (or tiling) is the covering of a surface, often a plane, using one or more geometric shapes, called tiles, with no overlaps and no gaps. + Tessellation + Tiling + Tessellation + A tessellation (or tiling) is the covering of a surface, often a plane, using one or more geometric shapes, called tiles, with no overlaps and no gaps. + A causal object that is tessellated in direct parts. - - - - "Quantity, in a system of quantities, defined in terms of the base quantities of that system". - DerivedQuantity - DerivedQuantity - "Quantity, in a system of quantities, defined in terms of the base quantities of that system". - derived quantity + + + + + + + + + + + + A class devoted to categorize causal objects by specifying their granularity levels. + A granularity level is specified by a tiling decomposition of the whole y. A tiling is identified as a set of items {x1, x2, ... xn} called tiles that: + - are proper parts of y + - covers the entire whole (y = x1 +x2 + ... + xn) + - do not overlap + - are part of one, and one only, whole (inverse functional) + Reductionistic + Reductionistic + A class devoted to categorize causal objects by specifying their granularity levels. + A granularity level is specified by a tiling decomposition of the whole y. A tiling is identified as a set of items {x1, x2, ... xn} called tiles that: + - are proper parts of y + - covers the entire whole (y = x1 +x2 + ... + xn) + - do not overlap + - are part of one, and one only, whole (inverse functional) + Direct parthood is the antitransitive parthood relation used to build the class hierarchy (and the granularity hierarchy) for this perspective. - - + + + - Quantities declared under the ISO 80000. - InternationalSystemOfQuantity - https://www.iso.org/obp/ui/#iso:std:iso:80000:-1:ed-1:v1:en:sec:3.1 - InternationalSystemOfQuantity - Quantities declared under the ISO 80000. - https://en.wikipedia.org/wiki/International_System_of_Quantities + Duration required for the neutron fluence rate in a reactor to change by the factor e when the fluence rate is rising or falling exponentially. + ReactorTimeConstant + ReactorTimeConstant + https://qudt.org/vocab/quantitykind/ReactorTimeConstant + https://www.wikidata.org/wiki/Q99518950 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-07-04 + 10-79 + Duration required for the neutron fluence rate in a reactor to change by the factor e when the fluence rate is rising or falling exponentially. - - - - - ElectronAntiNeutrino - ElectronAntiNeutrino + + + + A chain of linked physics based model simulations, where equations are solved sequentially. + LinkedModelsSimulation + LinkedModelsSimulation + A chain of linked physics based model simulations, where equations are solved sequentially. - - - - Light scattering is the way light behaves when it interacts with a medium that contains particles or the boundary between different mediums where defects or structures are present. It is different than the effects of refraction, where light undergoes a change in index of refraction as it passes from one medium to another, or reflection, where light reflects back into the same medium, both of which are governed by Snell’s law. Light scattering can be caused by factors such as the nature, texture, or specific structures of a surface and the presence of gas, liquid, or solid particles through which light propagates, as well as the nature of the light itself, of its wavelengths and polarization states. It usually results in diffuse light and can also affect the dispersion of color. - - LightScattering - LightScattering - Light scattering is the way light behaves when it interacts with a medium that contains particles or the boundary between different mediums where defects or structures are present. It is different than the effects of refraction, where light undergoes a change in index of refraction as it passes from one medium to another, or reflection, where light reflects back into the same medium, both of which are governed by Snell’s law. Light scattering can be caused by factors such as the nature, texture, or specific structures of a surface and the presence of gas, liquid, or solid particles through which light propagates, as well as the nature of the light itself, of its wavelengths and polarization states. It usually results in diffuse light and can also affect the dispersion of color. + + + + A physics based simulation with multiple physics based models. + MultiSimulation + MultiSimulation + A physics based simulation with multiple physics based models. - - + + + + + + + + + + + + The human operator who takes care of the whole characterisation method or sub-processes/stages. - OpticalTesting - OpticalTesting + Operator + Operator + The human operator who takes care of the whole characterisation method or sub-processes/stages. - - - - - - - - - - - - A system is conceived as an aggregate of things that 'work' (or interact) together. While a system extends in time through distinct temporal parts (like every other 4D object), this elucdation focuses on a timescale in which the obejct shows a persistence in time. - An object that is made of a set of sub objects working together as parts of a mechanism or an interconnecting network (natural or artificial); a complex whole. - HolisticSystem - HolisticSystem - An object that is made of a set of sub objects working together as parts of a mechanism or an interconnecting network (natural or artificial); a complex whole. + + + + An aerosol composed of liquid droplets in air or another gas. + LiquidAerosol + LiquidAerosol + An aerosol composed of liquid droplets in air or another gas. - - - - A physical made of more than one symbol sequentially arranged. - A string is made of concatenated symbols whose arrangement is one-dimensional. Each symbol can have only one previous and one next neighborhood (bidirectional list). - String - String - A physical made of more than one symbol sequentially arranged. - The word "cat" considered as a collection of 'symbol'-s respecting the rules of english language. - -In this example the 'symbolic' entity "cat" is not related to the real cat, but it is only a word (like it would be to an italian person that ignores the meaning of this english word). + + + + + A colloid composed of fine solid particles or liquid droplets in air or another gas. + Aerosol + Aerosol + A colloid composed of fine solid particles or liquid droplets in air or another gas. + -If an 'interpreter' skilled in english language is involved in a 'semiotic' process with this word, that "cat" became also a 'sign' i.e. it became for the 'interpreter' a representation for a real cat. - A string is made of concatenated symbols whose arrangement is one-dimensional. Each symbol can have only one previous and one next neighborhood (bidirectional list). - A string is not requested to respect any syntactic rule: it's simply directly made of symbols. + + + + A reference unit provided by a measurement procedure. + Procedure units and measurement units are disjoint. + ProcedureUnit + MeasurementProcedure + ProcedureUnit + A reference unit provided by a measurement procedure. + Rockwell C hardness of a given sample (150 kg load): 43.5HRC(150 kg) + Procedure units and measurement units are disjoint. - - - + + + + + + - - + + - - A symbolic entity made of other symbolic entities according to a specific spatial configuration. - This class collects individuals that represents arrangements of strings, or other symbolic compositions, without any particular predifined arrangement schema. - SymbolicConstruct - SymbolicConstruct - A symbolic entity made of other symbolic entities according to a specific spatial configuration. - This class collects individuals that represents arrangements of strings, or other symbolic compositions, without any particular predifined arrangement schema. - + + + The velocity depends on the choice of the reference frame. Proper transformation between frames must be used: Galilean for non-relativistic description, Lorentzian for relativistic description. - - - - - DifferentialRefractiveIndex - DifferentialRefractiveIndex - +-- IEC, note 2 + The velocity is related to a point described by its position vector. The point may localize a particle, or be attached to any other object such as a body or a wave. - - - - - - - - - - - - - - - - - - - 1 - - - - A real number. - Real - Real - A real number. +-- IEC, note 1 + Vector quantity giving the rate of change of a position vector. + +-- ISO 80000-3 + Velocity + Velocity + http://qudt.org/vocab/quantitykind/Velocity + https://www.wikidata.org/wiki/Q11465 + Vector quantity giving the rate of change of a position vector. + +-- ISO 80000-3 + 3-8.1 + 3‑10.1 - - - - Riveting - Riveting + + + + A procedure that deals with quantitative symbols (i.e. symbols associated with a quantitative oriented language). + Computation + Computation + A procedure that deals with quantitative symbols (i.e. symbols associated with a quantitative oriented language). + A matematician that calculates 2+2. +A computation machine that calculate the average value of a dataset. - + + + + The interpreter's internal representation of the object in a semiosis process. + Interpretant + Interpretant + The interpreter's internal representation of the object in a semiosis process. + + + - - + - Number of slowed-down particles per time and volume. - SlowingDownDensity - SlowingDownDensity - https://qudt.org/vocab/quantitykind/Slowing-DownDensity - https://www.wikidata.org/wiki/Q98915830 - 10-67 - Number of slowed-down particles per time and volume. - - - - - - - AntiTau - AntiTau + Measured in cd/m². Not to confuse with Illuminance, which is measured in lux (cd sr/m²). + a photometric measure of the luminous intensity per unit area of light travelling in a given direction. + Luminance + Luminance + http://qudt.org/vocab/quantitykind/Luminance + https://doi.org/10.1351/goldbook.L03640 - - - - - A workflow that is the concurrent evolution of two or more tasks, not communicacting between themselves. - PureParallelWorkflow - EmbarassinglyParallelWorkflow - PureParallelWorkflow - A workflow that is the concurrent evolution of two or more tasks, not communicacting between themselves. + + + + + T-3 L0 M+1 I0 Θ0 N0 J0 + + + + + PowerDensityUnit + PowerDensityUnit - - - - A causal object which is tessellated with only spatial direct parts. - The definition of an arrangement implies that its spatial direct parts are not gained or lost during its temporal extension (they exist from the left to the right side of the time interval), so that the cardinality of spatial direct parts in an arrangement is constant. -This does not mean that there cannot be a change in the internal structure of the arrangement direct parts. It means only that this change must not affect the existence of the direct part itself. - The use of spatial direct parthood in state definition means that an arrangement cannot overlap in space another arrangement that is direct part of the same whole. - Arrangement - MereologicalState - Arrangement - A causal object which is tessellated with only spatial direct parts. - e.g. the existent in my glass is declared at t = t_start as made of two direct parts: the ice and the water. It will continue to exists as state as long as the ice is completely melt at t = t_end. The new state will be completely made of water. Between t_start and t_end there is an exchange of molecules between the ice and the water, but this does not affect the existence of the two states. - -If we partition the existent in my glass as ice surrounded by several molecules (we do not use the object water as direct part) then the appearance of a molecule coming from the ice will cause a state to end and another state to begin. + + + + A CausalSystem that includes quantum parts that are not bonded with the rest. + PhysicalPhenomena + PhysicalPhenomena + A CausalSystem that includes quantum parts that are not bonded with the rest. - - - - ParallelWorkflow - ParallelWorkflow + + + + + + + + + + + + + + + A causally bonded system is a system in which there are at least thwo causal paths that are interacting. + PhysicallyInteracting + PhysicallyInteracting + A causally bonded system is a system in which there are at least thwo causal paths that are interacting. - - - - Stripping voltammetry in which material accumulated at the working electrode is electrochemically reduced in the stripping step. A peak-shaped cathodic stripping voltammogram is obtained. Peak current depends on time of accumulation, mass transport of analyte (stirring), scan rate and mode (linear or pulse), and analyte concentration in solution. - CathodicStrippingVoltammetry - CSV - CathodicStrippingVoltammetry - https://www.wikidata.org/wiki/Q4016325 - Stripping voltammetry in which material accumulated at the working electrode is electrochemically reduced in the stripping step. A peak-shaped cathodic stripping voltammogram is obtained. Peak current depends on time of accumulation, mass transport of analyte (stirring), scan rate and mode (linear or pulse), and analyte concentration in solution. - https://doi.org/10.1515/pac-2018-0109 + + + + A relation which makes a non-equal comparison between two numbers or other mathematical expressions. + Inequality + Inequality + A relation which makes a non-equal comparison between two numbers or other mathematical expressions. + f(x) > 0 - - - - A procedure that deals with quantitative symbols (i.e. symbols associated with a quantitative oriented language). - Computation - Computation - A procedure that deals with quantitative symbols (i.e. symbols associated with a quantitative oriented language). - A matematician that calculates 2+2. -A computation machine that calculate the average value of a dataset. + + + + + Kinetic energy released per mass. + Kerma + Kerma + https://qudt.org/vocab/quantitykind/Kerma + https://www.wikidata.org/wiki/Q1739288 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-36 + 10-86.1 + Kinetic energy released per mass. - - - - StaticFrictionCoefficient - CoefficientOfStaticFriction - StaticFrictionFactor - StaticFrictionCoefficient - https://www.wikidata.org/wiki/Q73695673 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-33 - 4-23.1 + + + + + + + + + + + + + A gaseous solution made of more than one component type. + GasSolution + GasMixture + GasSolution + A gaseous solution made of more than one component type. - - + + + - Matter composed of both matter and antimatter fundamental particles. - HybridMatter - HybridMatter - Matter composed of both matter and antimatter fundamental particles. + A solution is a homogeneous mixture composed of two or more substances. + Solutions are characterized by the occurrence of Rayleigh scattering on light, + Solution + Solution + A solution is a homogeneous mixture composed of two or more substances. - - - - - - - - - - - + + + - In condensed matter physics, position vector of an atom or ion in equilibrium. - EquilibriumPositionVector - EquilibriumPositionVector - https://qudt.org/vocab/quantitykind/EquilibriumPositionVectorOfIon - https://www.wikidata.org/wiki/Q105533477 - 12-7.2 - In condensed matter physics, position vector of an atom or ion in equilibrium. + Reciprocal of the decay constant λ. + MeanDurationOfLife + MeanLifeTime + MeanDurationOfLife + https://qudt.org/vocab/quantitykind/MeanLifetime + https://www.wikidata.org/wiki/Q1758559 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-13 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-04-47 + 10-25 + Reciprocal of the decay constant λ. - - - - A material_relation can e.g. return a predefined number, return a database query, be an equation that depends on other physics_quantities. - An 'equation' that stands for a physical assumption specific to a material, and provides an expression for a 'physics_quantity' (the dependent variable) as function of other variables, physics_quantity or data (independent variables). - MaterialRelation - MaterialRelation - An 'equation' that stands for a physical assumption specific to a material, and provides an expression for a 'physics_quantity' (the dependent variable) as function of other variables, physics_quantity or data (independent variables). - The Lennard-Jones potential. -A force field. -An Hamiltonian. + + + + A characteriser that declares a property for an object without actually interact with it with the specific interaction required by the property definition (i.e. infer a property from other properties). + Estimator + Estimator + A characteriser that declares a property for an object without actually interact with it with the specific interaction required by the property definition (i.e. infer a property from other properties). - - - - Tensile testing, also known as tension testing, is a test in which a sample is subjected to a controlled tension until failure. Properties that are directly measured via a tensile test are ultimate tensile strength, breaking strength, maximum elongation and reduction in area. From these measurements the following properties can also be determined: Young's modulus, Poisson's ratio, yield strength, and strain-hardening characteristics. Uniaxial tensile testing is the most commonly used for obtaining the mechanical characteristics of isotropic materials. Some materials use biaxial tensile testing. The main difference between these testing machines being how load is applied on the materials. - - TensileTesting - TensionTest - TensileTesting - Tensile testing, also known as tension testing, is a test in which a sample is subjected to a controlled tension until failure. Properties that are directly measured via a tensile test are ultimate tensile strength, breaking strength, maximum elongation and reduction in area. From these measurements the following properties can also be determined: Young's modulus, Poisson's ratio, yield strength, and strain-hardening characteristics. Uniaxial tensile testing is the most commonly used for obtaining the mechanical characteristics of isotropic materials. Some materials use biaxial tensile testing. The main difference between these testing machines being how load is applied on the materials. + + + + + + + + + + + + + + + + + + + + + + An 'interpreter' that perceives another 'entity' (the 'object') through a specific perception mechanism and produces a 'property' (the 'sign') that stands for the result of that particular perception. + Determiner + Determiner + An 'interpreter' that perceives another 'entity' (the 'object') through a specific perception mechanism and produces a 'property' (the 'sign') that stands for the result of that particular perception. - + - T0 L+2 M0 I+1 Θ0 N0 J0 + T+3 L-3 M-1 I+2 Θ0 N0 J0 - MagneticDipoleMomentUnit - MagneticDipoleMomentUnit + ElectricConductivityUnit + ElectricConductivityUnit - - - - - - - - - - - + + + - Measure of magnetism, taking account of the strength and the extent of a magnetic field. - MagneticFlux - MagneticFlux - http://qudt.org/vocab/quantitykind/MagneticFlux - https://www.wikidata.org/wiki/Q177831 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-21 - https://dbpedia.org/page/Magnetic_flux - 6-22.1 - Measure of magnetism, taking account of the strength and the extent of a magnetic field. - https://en.wikipedia.org/wiki/Magnetic_flux - https://doi.org/10.1351/goldbook.M03684 + Quotient of the initial kinetic energy Ek of an ionizing charged particle and the total ionization Ni produced by that particle. + AverageEnergyLossPerElementaryChargeProduced + AverageEnergyLossPerElementaryChargeProduced + https://qudt.org/vocab/quantitykind/AverageEnergyLossPerElementaryChargeProduced + https://www.wikidata.org/wiki/Q98793042 + 10-60 + Quotient of the initial kinetic energy Ek of an ionizing charged particle and the total ionization Ni produced by that particle. - - - - - - - - - - - - - - - A charged vector boson that mediate the weak interaction. - WBoson - ChargedWeakBoson - IntermediateVectorBoson - WBoson - A charged vector boson that mediate the weak interaction. - https://en.wikipedia.org/wiki/W_and_Z_bosons + + + + + + + + + + + + A program is a sequence of instructions understandable by a computer's central processing unit (CPU) that indicates which operations the computer should perform on a set of data. + A set of instructions that tell a computer what to do. + Program + Executable + Program + A set of instructions that tell a computer what to do. + A program is a sequence of instructions understandable by a computer's central processing unit (CPU) that indicates which operations the computer should perform on a set of data. - + + + + Factor by which the phase velocity of light is reduced in a medium. + RefractiveIndex + RefractiveIndex + http://qudt.org/vocab/quantitykind/RefractiveIndex + https://doi.org/10.1351/goldbook.R05240 + + + + - + - + - A vector quantity equal to the product of the current, the loop area, and the unit vector normal to the loop plane, the direction of which corresponds to the loop orientation - MagneticMoment - MagneticAreaMoment - MagneticMoment - https://qudt.org/vocab/quantitykind/MagneticMoment - https://www.wikidata.org/wiki/Q242657 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-49 - 6-23 - A vector quantity equal to the product of the current, the loop area, and the unit vector normal to the loop plane, the direction of which corresponds to the loop orientation - https://doi.org/10.1351/goldbook.M03688 - - - - - - - - - - - - - - - - - - - - SecondGenerationFermion - SecondGenerationFermion + Entropy per amount of substance. + MolarEntropy + MolarEntropy + https://qudt.org/vocab/quantitykind/MolarEntropy + https://www.wikidata.org/wiki/Q68972876 + 9-8 + Entropy per amount of substance. - + - T-2 L+2 M+1 I-2 Θ0 N0 J0 + T-3 L+1 M+1 I0 Θ0 N0 J0 - InductanceUnit - InductanceUnit - - - - - - Electrogravimetry using an electrochemical quartz crystal microbalance. - The change of mass is, for rigid deposits, linearly proportional to the change of the reso- nance frequency of the quartz crystal, according to the Sauerbrey equation. For non- rigid deposits, corrections must be made. - - ElectrochemicalPiezoelectricMicrogravimetry - ElectrochemicalPiezoelectricMicrogravimetry - Electrogravimetry using an electrochemical quartz crystal microbalance. - https://doi.org/10.1515/pac-2018-0109 + MassLengthPerCubicTimeUnit + MassLengthPerCubicTimeUnit - - - - A direct part that is obtained by partitioning a whole purely in temporal parts. - TemporalTile - TemporalTile - A direct part that is obtained by partitioning a whole purely in temporal parts. + + + + + The mean free path may thus be specified either for all interactions, i.e. total mean free path, or for particular types of interaction such as scattering, capture, or ionization. + in a given medium, average distance that particles of a specified type travel between successive interactions of a specified type. + MeanFreePath + MeanFreePath + https://qudt.org/vocab/quantitykind/MeanFreePath + https://www.wikidata.org/wiki/Q756307 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-06-37 + 9-38 + in a given medium, average distance that particles of a specified type travel between successive interactions of a specified type. + https://doi.org/10.1351/goldbook.M03778 - - - - Photoluminescence spectroscopy is a widely used technique for characterisation of the optical and electronic properties of semiconductors and molecules. - - PhotoluminescenceMicroscopy - PhotoluminescenceMicroscopy - Photoluminescence spectroscopy is a widely used technique for characterisation of the optical and electronic properties of semiconductors and molecules. + + + + + T-1 L+2 M0 I0 Θ0 N0 J0 + + + + + AreicSpeedUnit + AreicSpeedUnit - - - - Casting - Casting + + + + + T-1 L-3 M0 I0 Θ0 N0 J0 + + + + + FrequencyPerVolumeUnit + FrequencyPerVolumeUnit - - - - Procedure to validate the characterisation data. - CharacterisationDataValidation - CharacterisationDataValidation - Procedure to validate the characterisation data. + + + + Encoded data made of more than one datum. + DataSet + DataSet + Encoded data made of more than one datum. - - - - CeramicSintering - CeramicSintering + + + + A self-consistent encoded data entity. + Datum + Datum + A self-consistent encoded data entity. + A character, a bit, a song in a CD. - + - - + - + - Measure of a material's ability to conduct an electric current. + Mechanical property of linear elastic solid materials. + ModulusOfElasticity + YoungsModulus + ModulusOfElasticity + https://www.wikidata.org/wiki/Q2091584 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-67 + 4-19.1 + Mechanical property of linear elastic solid materials. + https://doi.org/10.1351/goldbook.M03966 + -Conductivity is equeal to the resiprocal of resistivity. - ElectricConductivity - Conductivity - ElectricConductivity - http://qudt.org/vocab/quantitykind/ElectricConductivity - https://www.wikidata.org/wiki/Q4593291 - 6-43 - https://doi.org/10.1351/goldbook.C01245 + + + + A function solution of a physics equation that provides a methods for the prediction of some quantitiative properties of an object. + This must be a mathematical function v(t), x(t). +A dataset as solution is a conventional sign. + PhysicsEquationSolution + PhysicsEquationSolution + A function solution of a physics equation that provides a methods for the prediction of some quantitiative properties of an object. + A parabolic function is a prediction of the trajectory of a falling object in a gravitational field. While it has predictive capabilities it lacks of an analogical character, since it does not show the law behind that trajectory. - - - + + + + + A process which is an holistic temporal part of a process. + Stage + Stage + A process which is an holistic temporal part of a process. + Moving a leg is a stage of the process of running. + + + + + + Stripping voltammetry in which material accumulated at the working electrode is electrochemically oxi- dized in the stripping step. A peak-shaped anodic stripping voltammogram is obtained. Peak current depends on time of accumulation, mass transport of analyte (stirring), scan rate and mode (linear or pulse), and analyte concentration in solution. A solid electrode, carbon paste or composite electrode, bismuth film electrode, mercury film electrode, or static mercury drop electrode may be used. + AnodicStrippingVoltammetry + AnodicStrippingVoltammetry + https://www.wikidata.org/wiki/Q939328 + Stripping voltammetry in which material accumulated at the working electrode is electrochemically oxi- dized in the stripping step. A peak-shaped anodic stripping voltammogram is obtained. Peak current depends on time of accumulation, mass transport of analyte (stirring), scan rate and mode (linear or pulse), and analyte concentration in solution. A solid electrode, carbon paste or composite electrode, bismuth film electrode, mercury film electrode, or static mercury drop electrode may be used. + https://doi.org/10.1515/pac-2018-0109 + + + + + + Anodic stripping voltammetry (ASV) was historically used to measure concentrations of metal ions in solution using cathodic accumulation with mercury to form an amalgam. Due to the toxicity of mercury and its compounds, inductively coupled plasma optical emission spectrometry and inductively coupled plasma mass spectrometry have frequently replaced ASV at mercury electrodes in the laboratory, often sacrificing the probing of speciation and lability in complex matrices. Mercury has now been replaced by non-toxic bismuth or anti- mony as films on a solid electrode support (such as glassy carbon) with equally good sensi- tivity and detection limits. + Because the accumulation (pre-concentration) step can be prolonged, increasing the amount of material at the electrode, stripping voltammetry is able to measure very small concentrations of analyte. + Often the product of the electrochemical stripping is identical to the analyte before the accumulation. + Stripping voltammetry is a calibrated method to establish the relation between amount accumulated in a given time and the concentration of the analyte in solution. + Types of stripping voltammetry refer to the kind of accumulation (e.g. adsorptive stripping voltammetry) or the polarity of the stripping electrochemistry (anodic, cathodic stripping voltammetry). + two-step electrochemical measurement in which 1) material is accumulated at an electrode and 2) the amount of an accumulated species is measured by voltammetry. The measured electric current in step 2 is related to the concentration of analyte in the solution by calibration. + + StrippingVoltammetry + StrippingVoltammetry + two-step electrochemical measurement in which 1) material is accumulated at an electrode and 2) the amount of an accumulated species is measured by voltammetry. The measured electric current in step 2 is related to the concentration of analyte in the solution by calibration. + https://en.wikipedia.org/wiki/Electrochemical_stripping_analysis + https://doi.org/10.1515/pac-2018-0109 + + + + + - ActivityCoefficient - ActivityCoefficient - https://qudt.org/vocab/quantitykind/ActivityCoefficient - https://www.wikidata.org/wiki/Q745224 - 9-25 - https://doi.org/10.1351/goldbook.A00116 + Average number of fission neutrons, both prompt and delayed, emitted per fission event. + NeutronYieldPerFission + NeutronYieldPerFission + https://qudt.org/vocab/quantitykind/NeutronYieldPerFission + https://www.wikidata.org/wiki/Q99157909 + 10-74.1 + Average number of fission neutrons, both prompt and delayed, emitted per fission event. - - - - - - - - - - - - - CompositeBoson - CompositeBoson - Examples of composite particles with integer spin: -spin 0: H1 and He4 in ground state, pion -spin 1: H1 and He4 in first excited state, meson -spin 2: O15 in ground state. + + + + WPositiveBoson + WPositiveBoson - - - - - - - - - - - - Particles composed of two or more quarks. - Hadron - Hadron - Particles composed of two or more quarks. - https://en.wikipedia.org/wiki/Hadron + + + + + Partition function of a molecule. + MolecularPartitionFunction + MolecularPartitionFunction + https://www.wikidata.org/wiki/Q96192064 + 9-35.4 + Partition function of a molecule. - - - - + + - - + + - - ratio of the number of dissociated molecules of a specified type to the total number of dissolved molecules of this type. - DissociationConstant - DissociationConstant - https://www.wikidata.org/wiki/Q898254 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-01-10 - ratio of the number of dissociated molecules of a specified type to the total number of dissolved molecules of this type. + + + + + + + + + + + + + + Cognition + IconSemiosis + Cognition - - - - - The physical dimension can change based on the stoichiometric numbers of the substances involved. - for solutions, product for all substances B of concentration c_B of substance B in power of its stoichiometric number v_B: K_p = \sum_B{c_B^{v_B}}. - EquilibriumConstant - EquilibriumConstantConcentrationBasis - EquilibriumConstant - https://qudt.org/vocab/quantitykind/EquilibriumConstant - https://www.wikidata.org/wiki/Q857809 - for solutions, product for all substances B of concentration c_B of substance B in power of its stoichiometric number v_B: K_p = \sum_B{c_B^{v_B}}. - https://en.wikipedia.org/wiki/Equilibrium_constant - https://doi.org/10.1351/goldbook.E02177 + + + + + BlueUpQuark + BlueUpQuark - - - + + + - A solution is a homogeneous mixture composed of two or more substances. - Solutions are characterized by the occurrence of Rayleigh scattering on light, - Solution - Solution - A solution is a homogeneous mixture composed of two or more substances. + A coarse dispersion of liquid in a gas continuum phase. + GasLiquidSuspension + GasLiquidSuspension + A coarse dispersion of liquid in a gas continuum phase. + Rain, spray. - - + + - Product of damping coefficient and period duration. - LogarithmicDecrement - LogarithmicDecrement - https://www.wikidata.org/wiki/Q1399446 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-05-25 - 3-25 - Product of damping coefficient and period duration. + GrandCanonicalPartionFunction + GrandPartionFunction + GrandCanonicalPartionFunction + https://qudt.org/vocab/quantitykind/GrandCanonicalPartitionFunction + https://www.wikidata.org/wiki/Q96176022 + 9-35.3 - - - - Thermal ablation is the separation of material particles in solid, liquid or gaseous state by heat processes as well as the removal of these material particles by mechanical or electromagnetic forces (from: DIN - ThermalCutting - Thermisches Abtragen - ThermalCutting - Thermal ablation is the separation of material particles in solid, liquid or gaseous state by heat processes as well as the removal of these material particles by mechanical or electromagnetic forces (from: DIN + + + + + + + + + + + + + A property of an electrical conductor by which a change in current through it induces an electromotive force in both the conductor itself and in any nearby conductors by mutual inductance. + ElectricInductance + Inductance + ElectricInductance + http://qudt.org/vocab/quantitykind/Inductance + https://www.wikidata.org/wiki/Q177897 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-19 + 6-41.1 + A property of an electrical conductor by which a change in current through it induces an electromotive force in both the conductor itself and in any nearby conductors by mutual inductance. + https://doi.org/10.1351/goldbook.M04076 - + - T+4 L-2 M-1 I+1 Θ0 N0 J0 + T-3 L+2 M+1 I0 Θ0 N0 J0 - - JosephsonConstantUnit - JosephsonConstantUnit - - - - - - A chain of linked physics based model simulations, where equations are solved sequentially. - LinkedModelsSimulation - LinkedModelsSimulation - A chain of linked physics based model simulations, where equations are solved sequentially. - - - - - - Set of inherent properties of a substance, mixture of substances, or a process involving substances that, under production, usage, or disposal conditions, make it capable of causing adverse effects to organisms or the environment, depending on the degree of exposure; in other words, it is a source of danger. - - Hazard - Hazard - Set of inherent properties of a substance, mixture of substances, or a process involving substances that, under production, usage, or disposal conditions, make it capable of causing adverse effects to organisms or the environment, depending on the degree of exposure; in other words, it is a source of danger. + + PowerUnit + PowerUnit - - - - Data that are expressed through classical physics mechanisms, having one value and one state, and being in the same place at the same time. - ClassicalData - ClassicalData - Data that are expressed through classical physics mechanisms, having one value and one state, and being in the same place at the same time. + + + + + + + + + + + + + + + + + + + + + + An entity that is categorized according to its relation with a whole through a parthood relation and that contributes to it according to an holistic criterion, where the type of the whole is not the type of the part. + In this class the concept of role and part are superimposed (the term part is also used to define the role played by an actor). +Here entities are categorized according to their relation with the whole, i.e. how they contribute to make a specific whole, and not what they are as separate entities. +This class is expected to host the definition of world objects as they appear in its relation with the surrounding whole (being a part implies being surrounded by something bigger to which it contributes). + Role + HolisticPart + Part + Role + An entity that is categorized according to its relation with a whole through a parthood relation and that contributes to it according to an holistic criterion, where the type of the whole is not the type of the part. + In this class the concept of role and part are superimposed (the term part is also used to define the role played by an actor). +Here entities are categorized according to their relation with the whole, i.e. how they contribute to make a specific whole, and not what they are as separate entities. +This class is expected to host the definition of world objects as they appear in its relation with the surrounding whole (being a part implies being surrounded by something bigger to which it contributes). - - - + - + + - + + + + - Energy required to move a unit charge through an electric field from a reference point. - The electric potential is not unique, since any constant scalar -field quantity can be added to it without changing its gradient. - ElectricPotential - ElectroStaticPotential - ElectricPotential - http://qudt.org/vocab/quantitykind/ElectricPotential - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-25 - https://dbpedia.org/page/Electric_potential - 6-11.1 - Energy required to move a unit charge through an electric field from a reference point. - https://en.wikipedia.org/wiki/Electric_potential - https://doi.org/10.1351/goldbook.E01935 + ParticleConcentration + ParticleConcentration + https://www.wikidata.org/wiki/Q39078574 + 9-9.1 - - + + - Imaginary part of the complex power. - ReactivePower - ReactivePower - https://qudt.org/vocab/quantitykind/ReactivePower - https://www.wikidata.org/wiki/Q2144613 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-11-44 - 6-60 - Imaginary part of the complex power. + the abundance of a constituent divided by the total volume of a mixture. + Concentration + Concentration + https://qudt.org/vocab/quantitykind/Concentration + https://www.wikidata.org/wiki/Q3686031 + https://dbpedia.org/page/Concentration + the abundance of a constituent divided by the total volume of a mixture. + https://en.wikipedia.org/wiki/Concentration + https://goldbook.iupac.org/terms/view/C01222 - - + + + + + + - - T-3 L+2 M+1 I-1 Θ-1 N0 J0 + + - - + - ElectricPotentialPerTemperatureUnit - ElectricPotentialPerTemperatureUnit + Number of molecules of a substance in a mixture per volume. + MolecularConcentration + MolecularConcentration + https://qudt.org/vocab/quantitykind/MolecularConcentration + https://www.wikidata.org/wiki/Q88865973 + 9-9.2 + Number of molecules of a substance in a mixture per volume. - - - - A language object is a discrete data entity respecting a specific language syntactic rules (a well-formed formula). - Language - Language - A language object is a discrete data entity respecting a specific language syntactic rules (a well-formed formula). + + + + + + + + + + + + + Mean number of particles per volume. + ParticleNumberDensity + ParticleNumberDensity + https://qudt.org/vocab/quantitykind/ParticleNumberDensity + https://www.wikidata.org/wiki/Q98601569 + 10-62.1 + Mean number of particles per volume. + https://doi.org/10.1351/goldbook.N04262 - + @@ -15329,1472 +13910,2062 @@ field quantity can be added to it without changing its gradient. - + - Time derivative of exposure. - ExposureRate - ExposureRate - https://qudt.org/vocab/quantitykind/ExposureRate - https://www.wikidata.org/wiki/Q99720212 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-42 - 10-89 - Time derivative of exposure. + Differential quotient of the cross section for scattering a particle in a given direction and the solid angle around that direction. + DirectionDistributionOfCrossSection + DirectionDistributionOfCrossSection + https://qudt.org/vocab/quantitykind/AngularCrossSection + https://www.wikidata.org/wiki/Q98266630 + 10-39 + Differential quotient of the cross section for scattering a particle in a given direction and the solid angle around that direction. - - - - WNegativeBoson - WNegativeBoson + + + + a method used to measure the pore size distribution and total pore volume of solid materials by infiltrating mercury into the pores under controlled pressure conditions and analyzing the amount of mercury intrusion + + MercuryPorosimetry + MercuryPorosimetry + a method used to measure the pore size distribution and total pore volume of solid materials by infiltrating mercury into the pores under controlled pressure conditions and analyzing the amount of mercury intrusion - - - - - BlueTopAntiQuark - BlueTopAntiQuark + + + + + Porosimetry + Porosimetry - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - BlueAntiQuark - BlueAntiQuark + + + + From Powder, from liquid, from gas + da una forma non propria ad una forma propria + FromNotProperShapeToWorkPiece + FromNotProperShapeToWorkPiece + From Powder, from liquid, from gas + Powder: +particles that are usually less than 1 mm in size - - - - GluonType5 - GluonType5 + + + + + T-1 L-1 M+1 I0 Θ0 N0 J0 + + + + + MassPerLengthTimeUnit + MassPerLengthTimeUnit - - + + - - + + Δ - - 'Existent' is the EMMO class to be used for representing real world physical objects under a reductionistic perspective (i.e. objects come from the composition of sub-part objects, both in time and space). - -'Existent' class collects all individuals that stand for physical objects that can be structured in well defined temporal sub-parts called states, through the temporal direct parthood relation. - -This class provides a first granularity hierarchy in time, and a way to axiomatize tessellation principles for a specific whole with a non-transitivity relation (direct parthood) that helps to retain the granularity levels. - -e.g. a car, a supersaturated gas with nucleating nanoparticles, an atom that becomes ionized and then recombines with an electron. - A 'Physical' which is a tessellation of 'State' temporal direct parts. - An 'Existent' individual stands for a real world object for which the ontologist wants to provide univocal tessellation in time. - -By definition, the tiles are represented by 'State'-s individual. - -Tiles are related to the 'Existent' through temporal direct parthood, enforcing non-transitivity and inverse-functionality. - Being hasTemporalDirectPart a proper parthood relation, there cannot be 'Existent' made of a single 'State'. - -Moreover, due to inverse functionality, a 'State' can be part of only one 'Existent', preventing overlapping between 'Existent'-s. - Existent - true - Existent - A 'Physical' which is a tessellation of 'State' temporal direct parts. + + Laplacian + Laplacian - - - - A reference unit provided by a reference material. -International vocabulary of metrology (VIM) - StandardUnit - ReferenceMaterial - StandardUnit - A reference unit provided by a reference material. -International vocabulary of metrology (VIM) - Arbitrary amount-of-substance concentration of lutropin in a given sample of plasma (WHO international standard 80/552): 5.0 International Unit/l + + + + DifferentialOperator + DifferentialOperator - - - - - - - - - - - - - A reference can be a measurement unit, a measurement procedure, a reference material, or a combination of such (VIM3 1.1 NOTE 2). - A symbolic is recognized as reference unit also if it is not part of a quantity (e.g. as in the sentence "the Bq is the reference unit of Becquerel"). -For this reason we can't declare the axiom: -MetrologicalReference SubClassOf: inverse(hasMetrologicalReference) some Quantity -because there exist reference units without being part of a quantity. -This is peculiar to EMMO, where quantities as syntatic entities (explicit quantities) are distinct with quantities as semantic entities (properties). - MetrologicalReference - MetrologicalReference - A reference can be a measurement unit, a measurement procedure, a reference material, or a combination of such (VIM3 1.1 NOTE 2). - A symbolic is recognized as reference unit also if it is not part of a quantity (e.g. as in the sentence "the Bq is the reference unit of Becquerel"). -For this reason we can't declare the axiom: -MetrologicalReference SubClassOf: inverse(hasMetrologicalReference) some Quantity -because there exist reference units without being part of a quantity. -This is peculiar to EMMO, where quantities as syntatic entities (explicit quantities) are distinct with quantities as semantic entities (properties). + + + + + + + + + + A well formed tessellation with at least a junction tile. + MixedTiling + MixedTiling + A well formed tessellation with at least a junction tile. - - + + - PhotochemicalProcesses - PhotochemicalProcesses + ThermochemicalTreatment + ThermochemicalTreatment - - - - - Quotient of radiation amplitude scattered by the atom and radiation amplitude scattered by a single electron. - AtomicScatteringFactor - AtomicScatteringFactor - https://qudt.org/vocab/quantitykind/AtomScatteringFactor - https://www.wikidata.org/wiki/Q837866 - 12-5.3 - Quotient of radiation amplitude scattered by the atom and radiation amplitude scattered by a single electron. - https://en.wikipedia.org/wiki/Atomic_form_factor + + + + GluonType2 + GluonType2 - - - + + - - - - - - + + T0 L0 M-1 I+1 Θ0 N0 J0 - - - A constituent of a system. - Component - Component - A constituent of a system. + + + + ElectricCurrentPerMassUnit + ElectricCurrentPerMassUnit - - - + + + + + The integral over a time interval of the instantaneous power. + ActiveEnergy + ActiveEnergy + https://qudt.org/vocab/quantitykind/ActiveEnergy + https://www.wikidata.org/wiki/Q79813678 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-11-57 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=601-01-19 + 6-62 + The integral over a time interval of the instantaneous power. + + + + - The characterisation property is the investigate property or behaviour of a sample. It is derived from the secondary data, usually after classification or quantification (manually or by a model). + electrochemical method where traces of solid particles are abrasively transferred onto the surface of an electrode, followed by an electrochemical dissolution (anodic or cathodic dissolution) that is recorded as a current–voltage curve - CharacterisationProperty - CharacterisationProperty - The characterisation property is the investigate property or behaviour of a sample. It is derived from the secondary data, usually after classification or quantification (manually or by a model). + AbrasiveStrippingVoltammetry + AbrasiveStrippingVoltammetry + electrochemical method where traces of solid particles are abrasively transferred onto the surface of an electrode, followed by an electrochemical dissolution (anodic or cathodic dissolution) that is recorded as a current–voltage curve - - - + + - Cut-off angular frequency in the Debye model of the vibrational spectrum of a solid. - DebyeAngularFrequency - DebyeAngularFrequency - https://qudt.org/vocab/quantitykind/DebyeAngularFrequency - https://www.wikidata.org/wiki/Q105580986 - 12-10 - Cut-off angular frequency in the Debye model of the vibrational spectrum of a solid. + For a two-terminal element or a two-terminal circuit under periodic conditions, quantity equal to the square root of the difference of the squares of the apparent power S and the active power P. + NonActivePower + NonActivePower + https://qudt.org/vocab/quantitykind/NonActivePower + https://www.wikidata.org/wiki/Q79813060 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-11-43 + 6-61 + For a two-terminal element or a two-terminal circuit under periodic conditions, quantity equal to the square root of the difference of the squares of the apparent power S and the active power P. - - - - A real bond between atoms is always something hybrid between covalent, metallic and ionic. + + + + + T-3 L+2 M+1 I-1 Θ0 N0 J0 + + + + + ElectricPotentialUnit + ElectricPotentialUnit + -In general, metallic and ionic bonds have atoms sharing electrons. - An bonded atom that shares at least one electron to the atom-based entity of which is part of. - The bond types that are covered by this definition are the strong electonic bonds: covalent, metallic and ionic. - This class can be used to represent molecules as simplified quantum systems, in which outer molecule shared electrons are un-entangled with the inner shells of the atoms composing the molecule. - BondedAtom - BondedAtom - An bonded atom that shares at least one electron to the atom-based entity of which is part of. + + + + + An 'equation' that stands for a 'physical_law' by mathematically defining the relations between physics_quantities. + PhysicsEquation + PhysicsEquation + An 'equation' that stands for a 'physical_law' by mathematically defining the relations between physics_quantities. + The Newton's equation of motion. +The Schrödinger equation. +The Navier-Stokes equation. - - - - - In condensed matter physics, quotient of momentum and the reduced Planck constant. - AngularWaveNumber - AngularRepetency - AngularWaveNumber - https://qudt.org/vocab/quantitykind/AngularWavenumber - https://www.wikidata.org/wiki/Q105542089 - 12-9.1 - In condensed matter physics, quotient of momentum and the reduced Planck constant. + + + + A reference unit provided by a reference material. +International vocabulary of metrology (VIM) + StandardUnit + ReferenceMaterial + StandardUnit + A reference unit provided by a reference material. +International vocabulary of metrology (VIM) + Arbitrary amount-of-substance concentration of lutropin in a given sample of plasma (WHO international standard 80/552): 5.0 International Unit/l - - + + - XrdGrazingIncidence - XrdGrazingIncidence - - - - - - Irradiate - Irradiate + CharacterisationComponent + CharacterisationComponent - - - - Forming of a solid body, whereby the plastic state is essentially brought about by uniaxial or multiaxial compressive stress. - lasciano tensioni residue di compressione - CompressiveForming - Druckumformen - CompressiveForming + + + + + T0 L0 M0 I0 Θ+1 N0 J0 + + + + + TemperatureUnit + TemperatureUnit - - + + + - - + + - - A well formed tessellation with tiles that are all temporal. - TemporalTiling - TemporalTiling - A well formed tessellation with tiles that are all temporal. - - - - - - + + - - 1 + + + + + + + + + + + + + - Operation performed on a measuring instrument or a measuring system that, under specified conditions -1. establishes a relation between the values with measurement uncertainties provided by measurement standards and corresponding indications with associated measurement uncertainties and -2. uses this information to establish a relation for obtaining a measurement result from an indication -NOTE 1 The objective of calibration is to provide traceability of measurement results obtained when using a calibrated measuring instrument or measuring system. -NOTE 2 The outcome of a calibration may be expressed by a statement, calibration function, calibration diagram, calibration curve, or calibration table. In some cases, it may consist of an additive or multiplicative correction of the indication with associated measurement uncertainty. -NOTE 3 Calibration should not be confused with adjustment of a measuring system, often mistakenly called “selfcalibration”, nor with verification of calibration. Calibration is sometimes a prerequisite for verification, which provides confirmation that specified requirements (often maximum permissible errors) are met. Calibration is sometimes also a prerequisite for adjustment, which is the set of operations carried out on a measuring system such that the system provides prescribed indications corresponding to given values of quantities being measured, typically obtained from -measurement standards. -NOTE 4 Sometimes the first step alone of the operation mentioned in the definition is intended as being calibration, as it was in previous editions of this Vocabulary. The second step is in fact required to establish instrumental uncertainty -for the measurement results obtained when using the calibrated measuring system. The two steps together aim to demonstrate the metrological traceability of measurement results obtained by a calibrated measuring system. In the -past the second step was usually considered to occur after the calibration. -NOTE 5 A comparison between two measurement standards may be viewed as a calibration if the comparison is used to check and, if necessary, correct the value and measurement uncertainty attributed to one of the measurement -standards. + Process of experimentally obtaining one or more values that can reasonably be attributed to a quantity together with any other available relevant information +NOTE 1 The quantity mentioned in the definition is an individual quantity. +NOTE 2 The relevant information mentioned in the definition may be about the values obtained by the measurement, +such that some may be more representative of the measurand than others. +NOTE 3 Measurement is sometimes considered to apply to nominal properties, but not in this Vocabulary, where the +process of obtaining values of nominal properties is called “examination”. +NOTE 4 Measurement requires both experimental comparison of quantities or experimental counting of entities at +some step of the process and the use of models and calculations that are based on conceptual considerations. +NOTE 5 The conditions of reasonable attribution mentioned in the definition take into account a description of the +quantity commensurate with the intended use of a measurement result, a measurement procedure, and a calibrated +measuring system operating according to the specified measurement procedure, including the measurement +conditions. Moreover, a maximum permissible error and/or a target uncertainty may be specified, and the +measurement procedure and the measuring system should then be chosen in order not to exceed these measuring +system specifications. -- International Vocabulary of Metrology(VIM) - Sequence of operations/actions that are needed to convert the initial signal (as produced by the detector) into a meaningful and useable raw data. - Usually the calibration process involve a reference sample (with pre-defined, specific, and stable physical characteristics and known properties), in order to extract calibration data. In this way, the accuracy of the measurement tool and its components (for example the probe) will be evaluated and confirmed. - CalibrationProcess - CalibrationProcess - Operation performed on a measuring instrument or a measuring system that, under specified conditions -1. establishes a relation between the values with measurement uncertainties provided by measurement standards and corresponding indications with associated measurement uncertainties and -2. uses this information to establish a relation for obtaining a measurement result from an indication -NOTE 1 The objective of calibration is to provide traceability of measurement results obtained when using a calibrated measuring instrument or measuring system. -NOTE 2 The outcome of a calibration may be expressed by a statement, calibration function, calibration diagram, calibration curve, or calibration table. In some cases, it may consist of an additive or multiplicative correction of the indication with associated measurement uncertainty. -NOTE 3 Calibration should not be confused with adjustment of a measuring system, often mistakenly called “selfcalibration”, nor with verification of calibration. Calibration is sometimes a prerequisite for verification, which provides confirmation that specified requirements (often maximum permissible errors) are met. Calibration is sometimes also a prerequisite for adjustment, which is the set of operations carried out on a measuring system such that the system provides prescribed indications corresponding to given values of quantities being measured, typically obtained from -measurement standards. -NOTE 4 Sometimes the first step alone of the operation mentioned in the definition is intended as being calibration, as it was in previous editions of this Vocabulary. The second step is in fact required to establish instrumental uncertainty -for the measurement results obtained when using the calibrated measuring system. The two steps together aim to demonstrate the metrological traceability of measurement results obtained by a calibrated measuring system. In the -past the second step was usually considered to occur after the calibration. -NOTE 5 A comparison between two measurement standards may be viewed as a calibration if the comparison is used to check and, if necessary, correct the value and measurement uncertainty attributed to one of the measurement -standards. + The measurement process associates raw data to the sample through a probe and a detector. + CharacterisationMeasurementProcess + CharacterisationMeasurementProcess + Process of experimentally obtaining one or more values that can reasonably be attributed to a quantity together with any other available relevant information +NOTE 1 The quantity mentioned in the definition is an individual quantity. +NOTE 2 The relevant information mentioned in the definition may be about the values obtained by the measurement, +such that some may be more representative of the measurand than others. +NOTE 3 Measurement is sometimes considered to apply to nominal properties, but not in this Vocabulary, where the +process of obtaining values of nominal properties is called “examination”. +NOTE 4 Measurement requires both experimental comparison of quantities or experimental counting of entities at +some step of the process and the use of models and calculations that are based on conceptual considerations. +NOTE 5 The conditions of reasonable attribution mentioned in the definition take into account a description of the +quantity commensurate with the intended use of a measurement result, a measurement procedure, and a calibrated +measuring system operating according to the specified measurement procedure, including the measurement +conditions. Moreover, a maximum permissible error and/or a target uncertainty may be specified, and the +measurement procedure and the measuring system should then be chosen in order not to exceed these measuring +system specifications. -- International Vocabulary of Metrology(VIM) - Sequence of operations/actions that are needed to convert the initial signal (as produced by the detector) into a meaningful and useable raw data. - In nanoindentation, the electrical signal coming from capacitive displacement gauge is converted into a real raw-displacement signal after using a proper calibration function (as obtained by the equipment manufacturer). Then, additional calibration procedures are applied to define the point of initial contact and to correct for instrument compliance, thermal drift, and indenter area function to obtain the real useable displacement data. - Usually the calibration process involve a reference sample (with pre-defined, specific, and stable physical characteristics and known properties), in order to extract calibration data. In this way, the accuracy of the measurement tool and its components (for example the probe) will be evaluated and confirmed. + The measurement process associates raw data to the sample through a probe and a detector. + Measurement - + + + + The overall time needed to acquire the measurement data + + MeasurementTime + MeasurementTime + The overall time needed to acquire the measurement data + + + + + + + T+1 L+2 M0 I0 Θ+1 N0 J0 + + + + + AreaTimeTemperatureUnit + AreaTimeTemperatureUnit + + + + + + + T-3 L+1 M0 I0 Θ0 N0 J0 + + + + + LengthPerCubeTimeUnit + LengthPerCubeTimeUnit + + + + + + + + + + + + + + + + quotient of Thomson heat power developed, and the electric current and temperature difference + ThomsonCoefficient + ThomsonCoefficient + https://qudt.org/vocab/quantitykind/ThomsonCoefficient + https://www.wikidata.org/wiki/Q105801233 + 12-23 + quotient of Thomson heat power developed, and the electric current and temperature difference + + + - + - Discrete quantity; number of entities of a given kind in a system. - NumberOfEntities - NumberOfEntities - https://www.wikidata.org/wiki/Q614112 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=112-01-09 - 9-1 - Discrete quantity; number of entities of a given kind in a system. - https://doi.org/10.1351/goldbook.N04266 + ElectrolyticConductivity + ElectrolyticConductivity + https://qudt.org/vocab/quantitykind/ElectrolyticConductivity + https://www.wikidata.org/wiki/Q907564 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-01-03 + 9-44 + + + + + + + + + + + + + + + + Measure of a material's ability to conduct an electric current. + +Conductivity is equeal to the resiprocal of resistivity. + ElectricConductivity + Conductivity + ElectricConductivity + http://qudt.org/vocab/quantitykind/ElectricConductivity + https://www.wikidata.org/wiki/Q4593291 + 6-43 + https://doi.org/10.1351/goldbook.C01245 + + + + + + + The DBpedia definition (http://dbpedia.org/page/Vacuum_permittivity) is outdated since May 20, 2019. It is now a measured constant. + The value of the absolute dielectric permittivity of classical vacuum. + VacuumElectricPermittivity + PermittivityOfVacuum + VacuumElectricPermittivity + http://qudt.org/vocab/constant/PermittivityOfVacuum + 6-14.1 + https://doi.org/10.1351/goldbook.P04508 - - + + + - Width of the forbidden energy band in a superconductor. - SuperconductorEnergyGap - SuperconductorEnergyGap - https://qudt.org/vocab/quantitykind/SuperconductorEnergyGap - https://www.wikidata.org/wiki/Q106127898 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=815-10-28 - 12-37 - Width of the forbidden energy band in a superconductor. + Change of phase angle with the length along the path travelled by a plane wave. + The imaginary part of the propagation coefficient. + PhaseCoefficient + PhaseChangeCoefficient + PhaseCoefficient + https://qudt.org/vocab/quantitykind/PhaseCoefficient + https://www.wikidata.org/wiki/Q32745742 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-10-20 + 3-26.2 + Change of phase angle with the length along the path travelled by a plane wave. + The imaginary part of the propagation coefficient. + https://en.wikipedia.org/wiki/Propagation_constant#Phase_constant - - + + + + + + + + - + - - - - - - - + + - - UpAntiQuarkType - UpAntiQuarkType + + A 'Mathematical' entity that is made of a 'Numeral' and a 'MeasurementUnit' defined by a physical law, connected to a physical entity through a model perspective. Measurement is done according to the same model. + In the same system of quantities, dim ρB = ML−3 is the quantity dimension of mass concentration of component B, and ML−3 is also the quantity dimension of mass density, ρ. +ISO 80000-1 + Measured or simulated 'physical propertiy'-s are always defined by a physical law, connected to a physical entity through a model perspective and measurement is done according to the same model. + +Systems of units suggests that this is the correct approach, since except for the fundamental units (length, time, charge) every other unit is derived by mathematical relations between these fundamental units, implying a physical laws or definitions. + Measurement units of quantities of the same quantity dimension may be designated by the same name and symbol even when the quantities are not of the same kind. + +For example, joule per kelvin and J/K are respectively the name and symbol of both a measurement unit of heat capacity and a measurement unit of entropy, which are generally not considered to be quantities of the same kind. + +However, in some cases special measurement unit names are restricted to be used with quantities of specific kind only. + +For example, the measurement unit ‘second to the power minus one’ (1/s) is called hertz (Hz) when used for frequencies and becquerel (Bq) when used for activities of radionuclides. + +As another example, the joule (J) is used as a unit of energy, but never as a unit of moment of force, i.e. the newton metre (N · m). + — quantities of the same kind have the same quantity dimension, +— quantities of different quantity dimensions are always of different kinds, and +— quantities having the same quantity dimension are not necessarily of the same kind. +ISO 80000-1 + PhysicalQuantity + PhysicalQuantity + A 'Mathematical' entity that is made of a 'Numeral' and a 'MeasurementUnit' defined by a physical law, connected to a physical entity through a model perspective. Measurement is done according to the same model. - - - - A real vector with 3 elements. - Shape3Vector - Shape3Vector - A real vector with 3 elements. - The quantity value of physical quantities if real space is a Shape3Vector. + + + + + + + + + + + + The interest is on the 4D object as it extends in time (process) or as it persists in time (object): +- object (focus on spatial configuration) +- process (focus on temporal evolution) + +The concepts of endurant and perdurant implicitly rely on the concept of instantaneous 3D snapshot of the world object, that in the EMMO is not allowed since everything extends in 4D and there are no abstract objects. Moreover, time is a measured property in the EMMO and not an objective characteristic of an object, and cannot be used as temporal index to identify endurant position in time. + +For this reason an individual in the EMMO can always be classified both endurant and perdurant, due to its nature of 4D entity (e.g. an individual may belong both to the class of runners and the class of running process), and the distinction is purely semantic. In fact, the object/process distinction is simply a matter of convenience in a 4D approach since a temporal extension is always the case, and stationarity depends upon observer time scale. For this reason, the same individual (4D object) may play the role of a process or of an object class depending on the object to which it relates. + +Nevertheless, it is useful to introduce categorizations that characterize persistency through continuant and occurrent concepts, even if not ontologically but only cognitively defined. This is also due to the fact that our language distinguish between nouns and verbs to address things, forcing the separation between things that happens and things that persist. + +This perspective provides classes conceptually similar to the concepts of endurant and perdurant (a.k.a. continuant and occurrent). We claim that this distinction is motivated by our cognitive bias, and we do not commit to the fact that both these kinds of entity “do really exist”. For this reason, a whole instance can be both process and object, according to different cognitive approaches (see Wonderweb D17). + +The distinction between endurant and perdurant as usually introduced in literature (see BFO SPAN/SNAP approach) is then no more ontological, but can still be expressed through the introduction of ad hoc primitive definitions that follow the interpreter endurantist or perdurantist attitude. + The union of the object or process classes. + Persistence + Persistence + The union of the object or process classes. - + - - + - Differential quotient of N with respect to a, where N is the number of particles incident on a sphere of cross-sectional area a. - ParticleFluence - ParticleFluence - https://qudt.org/vocab/quantitykind/ParticleFluence - https://www.wikidata.org/wiki/Q82965908 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-15 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-04-18 - 10-43 - Differential quotient of N with respect to a, where N is the number of particles incident on a sphere of cross-sectional area a. - - - - - - Chronocoulometry provides the same information that is provided by chronoamperometry, since it is based on the integration of the I-t curve. Nevertheless, chronocoulometry offers important experimental advantages, such as (i) the measured signal usually increases with time and hence the later parts of the transient can be detected more accurately, (ii) a better signal-to-noise ratio can be achieved, and (iii) other contributions to overall charge passed as a function of time can be discriminated from those due to the diffusion of electroactive substances. - direct coulometry at controlled potential in which the electric charge passed after the application of a potential step perturbation is measured as a function of time (Q-t curve) - - Chronocoulometry - Chronocoulometry - direct coulometry at controlled potential in which the electric charge passed after the application of a potential step perturbation is measured as a function of time (Q-t curve) - https://doi.org/10.1515/pac-2018-0109 - - - - - - Calibration data are used to provide correction of measured data or perform uncertainty calculations. They are generally the result of a measuerement on a reference specimen. - CalibrationData - CalibrationData - Calibration data are used to provide correction of measured data or perform uncertainty calculations. They are generally the result of a measuerement on a reference specimen. + Perceived power of light. + LuminousFlux + LuminousFlux + http://qudt.org/vocab/quantitykind/LuminousFlux + 7-13 + Perceived power of light. + https://doi.org/10.1351/goldbook.L03646 - + + - - + - Measure of how resistant to compressibility a substance is. - ModulusOfCompression - BulkModulus - ModulusOfCompression - https://qudt.org/vocab/quantitykind/BulkModulus - https://www.wikidata.org/wiki/Q900371 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-69 - 4-19.3 - Measure of how resistant to compressibility a substance is. + A dose quantity used in the International Commission on Radiological Protection (ICRP) system of radiological protection. + DoseEquivalent + DoseEquivalent + http://qudt.org/vocab/quantitykind/DoseEquivalent + 10-83.1 + A dose quantity used in the International Commission on Radiological Protection (ICRP) system of radiological protection. + https://doi.org/10.1351/goldbook.E02101 - - - + + - Number of donor levels per volume. - DonorDensity - DonorDensity - https://qudt.org/vocab/quantitykind/DonorDensity - https://www.wikidata.org/wiki/Q105979886 - 12-29.4 - Number of donor levels per volume. + Physical constant in Newton's law of gravitation and in Einstein's general theory of relativity. + NewtonianConstantOfGravity + NewtonianConstantOfGravity + http://qudt.org/vocab/constant/NewtonianConstantOfGravitation + https://doi.org/10.1351/goldbook.G02695 - - - - - - - - - - - - ReciprocalVolume - ReciprocalVolume + + + + A causal expansion is a fundamental causal system that is expressed as a complete bipartite directed graph K(m,n), when m<n. + CausalExpansion + CausalExpansion + A causal expansion is a fundamental causal system that is expressed as a complete bipartite directed graph K(m,n), when m<n. - - - - Heat capacity at constant volume. - IsochoricHeatCapacity - HeatCapacityAtConstantVolume - IsochoricHeatCapacity - https://www.wikidata.org/wiki/Q112187521 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-50 - 5-16.3 - Heat capacity at constant volume. + + + + + + + + + + + + + + + + + + + + A causal system that is the representation of a Feynman diagram, where quantum represents the real particles entering and exiting the system. + A fundamental physical process is made of one or more standard particles as input, and one or more standard particles as output, where each input is direct cause of each output. +Each fundamental physical phenomena refers to a Feynman diagram, hence is made at least of three standard model particles. +This requirement implies that a physical phenomena is either a decay, annihilation, interaction, collapse or creation phenomena (fundamental) or a composition of them (non-fundamental). + A fundamental system is expressed as a complete bipartite directed graph K(m,n) of quantums, m being the number of originating quantums, and n being the receiving quantums. + FundamentalInteraction + FundamentalInteraction + A fundamental physical process is made of one or more standard particles as input, and one or more standard particles as output, where each input is direct cause of each output. +Each fundamental physical phenomena refers to a Feynman diagram, hence is made at least of three standard model particles. +This requirement implies that a physical phenomena is either a decay, annihilation, interaction, collapse or creation phenomena (fundamental) or a composition of them (non-fundamental). + A causal system that is the representation of a Feynman diagram, where quantum represents the real particles entering and exiting the system. + A fundamental system is expressed as a complete bipartite directed graph K(m,n) of quantums, m being the number of originating quantums, and n being the receiving quantums. + + + + + + Quantifies the raw data acquisition rate, if applicable. + DataAcquisitionRate + DataAcquisitionRate + Quantifies the raw data acquisition rate, if applicable. - + - T0 L+6 M0 I0 Θ0 N0 J0 + T-1 L+3 M0 I0 Θ0 N0 J0 - SexticLengthUnit - SexticLengthUnit + VolumePerTimeUnit + VolumePerTimeUnit - + + + + + + + + + + + + Energy per unit change in amount of substance. + ChemicalPotential + ChemicalPotential + http://qudt.org/vocab/quantitykind/ChemicalPotential + 9-17 + https://doi.org/10.1351/goldbook.C01032 + + + - T0 L0 M+1 I0 Θ0 N+1 J0 + T-2 L+2 M+1 I0 Θ0 N0 J0 - - MassAmountOfSubstanceUnit - MassAmountOfSubstanceUnit + + EnergyUnit + EnergyUnit - - - - Scalar quantity equal to the flux of the displacement current density JD through a given directed surface S. - DisplacementCurrent - DisplacementCurrent - https://qudt.org/vocab/quantitykind/DisplacementCurrent - https://www.wikidata.org/wiki/Q853178 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-43 - 6-19.1 - Scalar quantity equal to the flux of the displacement current density JD through a given directed surface S. + + + + + BlueDownAntiQuark + BlueDownAntiQuark - - + + + + + A foam of trapped gas in a liquid. + LiquidFoam + LiquidFoam + A foam of trapped gas in a liquid. + + + + + + A colloid formed by trapping pockets of gas in a liquid or solid. + Foam + Foam + A colloid formed by trapping pockets of gas in a liquid or solid. + + + + - + - + - Vector potential of the magnetic flux density. - MagneticVectorPotential - MagneticVectorPotential - https://qudt.org/vocab/quantitykind/MagneticVectorPotential - https://www.wikidata.org/wiki/Q2299100 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-23 - 6-32 - Vector potential of the magnetic flux density. + Vector characterising a dislocation in a crystal lattice. + BurgersVector + BurgersVector + https://qudt.org/vocab/quantitykind/BurgersVector + https://www.wikidata.org/wiki/Q623093 + 12-6 + Vector characterising a dislocation in a crystal lattice. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - The class of individuals that stand for quarks elementary particles. - Quark - Quark - The class of individuals that stand for quarks elementary particles. - https://en.wikipedia.org/wiki/Quark + + + + + + + + + + + + + A 'Sign' can have temporal-direct-parts which are 'Sign' themselves. + +A 'Sign' usually havs 'sign' spatial direct parts only up to a certain elementary semiotic level, in which the part is only a 'Physical' and no more a 'Sign' (i.e. it stands for nothing). This elementary semiotic level is peculiar to each particular system of signs (e.g. text, painting). + +Just like an 'Elementary' in the 'Physical' branch, each 'Sign' branch should have an a-tomistic mereological part. + According to Peirce, 'Sign' includes three subcategories: +- symbols: that stand for an object through convention +- indeces: that stand for an object due to causal continguity +- icons: that stand for an object due to similitudes e.g. in shape or composition + An 'Physical' that is used as sign ("semeion" in greek) that stands for another 'Physical' through an semiotic process. + Sign + Sign + An 'Physical' that is used as sign ("semeion" in greek) that stands for another 'Physical' through an semiotic process. + A novel is made of chapters, paragraphs, sentences, words and characters (in a direct parthood mereological hierarchy). + +Each of them are 'sign'-s. + +A character can be the a-tomistic 'sign' for the class of texts. + +The horizontal segment in the character "A" is direct part of "A" but it is not a 'sign' itself. + +For plain text we can propose the ASCII symbols, for math the fundamental math symbols. - - - - - Difference between energy of an electron at rest at infinity and a certain energy level which is the energy of an electron in the interior of a substance. - IonizationEnergy - IonizationEnergy - https://qudt.org/vocab/quantitykind/IonizationEnergy - https://www.wikidata.org/wiki/Q483769 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-06-39 - 12-24.2 - Difference between energy of an electron at rest at infinity and a certain energy level which is the energy of an electron in the interior of a substance. - https://doi.org/10.1351/goldbook.I03199 + + + + + A solid solution made of two or more component substances. + SolidSolution + SolidSolution + A solid solution made of two or more component substances. - + - T-1 L0 M-1 I0 Θ0 N+1 J0 + T+2 L0 M0 I0 Θ0 N0 J0 - AmountPerMassTimeUnit - AmountPerMassTimeUnit + SquareTimeUnit + SquareTimeUnit - + + + + Enthalpy per unit mass. + SpecificEnthalpy + SpecificEnthalpy + https://qudt.org/vocab/quantitykind/SpecificEnthalpy + https://www.wikidata.org/wiki/Q21572993 + 5-21.3 + Enthalpy per unit mass. + https://en.wikipedia.org/wiki/Enthalpy#Specific_enthalpy + + + - T+2 L0 M0 I0 Θ0 N0 J0 + T+3 L-2 M-1 I0 Θ0 N0 J+1 + + LuminousEfficacyUnit + LuminousEfficacyUnit + + + + + - SquareTimeUnit - SquareTimeUnit + Angular frequency divided by angular wavenumber. + PhaseSpeedOfElectromagneticWaves + PhaseSpeedOfElectromagneticWaves + https://qudt.org/vocab/quantitykind/ElectromagneticWavePhaseSpeed + https://www.wikidata.org/wiki/Q77990619 + 6-35.1 + Angular frequency divided by angular wavenumber. - - - - Physical constant used to define a unit system. Hence, when expressed in that unit system they have an exact value with no associated uncertainty. - ExactConstant - ExactConstant - Physical constant used to define a unit system. Hence, when expressed in that unit system they have an exact value with no associated uncertainty. + + + + A liquid solution in which the solvent is water. + AqueousSolution + AqueousSolution + A liquid solution in which the solvent is water. - - + + + + + A liquid solution made of two or more component substances. + LiquidSolution + LiquidSolution + A liquid solution made of two or more component substances. + + + + - Sum of electric current density and displacement current density. - TotalCurrentDensity - TotalCurrentDensity - https://qudt.org/vocab/quantitykind/TotalCurrentDensity - https://www.wikidata.org/wiki/Q77680811 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-44 - 6-20 - Sum of electric current density and displacement current density. + maximal distance of two points of an object, in a given direction or along a straight line passing through the centre. + The diameter of a circle or a sphere is twice its radius. + Diameter + Diameter + https://qudt.org/vocab/quantitykind/Diameter + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-01-27 + https://dbpedia.org/page/Diameter + 3-1.5 + maximal distance of two points of an object, in a given direction or along a straight line passing through the centre. + https://en.wikipedia.org/wiki/Diameter - - + + + + + - - T-1 L+2 M0 I0 Θ0 N0 J0 + + - - + - AreicSpeedUnit - AreicSpeedUnit + Mathematical description in crystallography. + StructureFactor + StructureFactor + https://qudt.org/vocab/quantitykind/StructureFactor + https://www.wikidata.org/wiki/Q900684 + 12-5.4 + Mathematical description in crystallography. - - - - Broadcast - Broadcast + + + + A matter object throughout which all physical properties of a material are essentially uniform. + In the physical sciences, a phase is a region of space (a thermodynamic system), throughout which all physical properties of a material are essentially uniform. Examples of physical properties include density, index of refraction, magnetization and chemical composition. A simple description is that a phase is a region of material that is chemically uniform, physically distinct, and (often) mechanically separable. In a system consisting of ice and water in a glass jar, the ice cubes are one phase, the water is a second phase, and the humid air is a third phase over the ice and water. The glass of the jar is another separate phase. + +The term phase is sometimes used as a synonym for state of matter, but there can be several immiscible phases of the same state of matter. Also, the term phase is sometimes used to refer to a set of equilibrium states demarcated in terms of state variables such as pressure and temperature by a phase boundary on a phase diagram. Because phase boundaries relate to changes in the organization of matter, such as a change from liquid to solid or a more subtle change from one crystal structure to another, this latter usage is similar to the use of "phase" as a synonym for state of matter. However, the state of matter and phase diagram usages are not commensurate with the formal definition given above and the intended meaning must be determined in part from the context in which the term is used. + PhaseOfMatter + Phase + PhaseOfMatter + A matter object throughout which all physical properties of a material are essentially uniform. + In the physical sciences, a phase is a region of space (a thermodynamic system), throughout which all physical properties of a material are essentially uniform. Examples of physical properties include density, index of refraction, magnetization and chemical composition. A simple description is that a phase is a region of material that is chemically uniform, physically distinct, and (often) mechanically separable. In a system consisting of ice and water in a glass jar, the ice cubes are one phase, the water is a second phase, and the humid air is a third phase over the ice and water. The glass of the jar is another separate phase. + +The term phase is sometimes used as a synonym for state of matter, but there can be several immiscible phases of the same state of matter. Also, the term phase is sometimes used to refer to a set of equilibrium states demarcated in terms of state variables such as pressure and temperature by a phase boundary on a phase diagram. Because phase boundaries relate to changes in the organization of matter, such as a change from liquid to solid or a more subtle change from one crystal structure to another, this latter usage is similar to the use of "phase" as a synonym for state of matter. However, the state of matter and phase diagram usages are not commensurate with the formal definition given above and the intended meaning must be determined in part from the context in which the term is used. - - - - - T-1 L0 M+1 I-1 Θ0 N0 J0 - - - - - MassPerElectricChargeUnit - MassPerElectricChargeUnit + + + + + + + + + + + + + + + + A physical particle with half odd integer spin (1/2, 3/2, etc...) that follows Fermi-Dirac statistics. + Fermion + Fermion + A physical particle with half odd integer spin (1/2, 3/2, etc...) that follows Fermi-Dirac statistics. + https://en.wikipedia.org/wiki/Fermion - - - + + - Number of holes in valence band per volume. - HoleDensity - HoleDensity - https://qudt.org/vocab/quantitykind/HoleDensity - https://www.wikidata.org/wiki/Q105971101 - 12-29.2 - Number of holes in valence band per volume. + Quotient of the magnetic dipole moment of an atom, and the product of the total angular momentum quantum number and the Bohr magneton. + LandeFactor + GFactorOfAtom + LandeFactor + https://qudt.org/vocab/quantitykind/LandeGFactor + https://www.wikidata.org/wiki/Q1191684 + 10-14.1 + Quotient of the magnetic dipole moment of an atom, and the product of the total angular momentum quantum number and the Bohr magneton. - - - - action to disassemble a product or a component by removing all or some of its constituent parts with the intent to salvage - Dismantling - Demontage - Dismantling - action to disassemble a product or a component by removing all or some of its constituent parts with the intent to salvage + + + + + Displacement of one surface with respect to another divided by the distance between them. + ShearStrain + ShearStrain + https://qudt.org/vocab/quantitykind/ShearStrain + https://www.wikidata.org/wiki/Q7561704 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-59 + 4-17.3 + Displacement of one surface with respect to another divided by the distance between them. + https://doi.org/10.1351/goldbook.S05637 - - - + + - Under sinusoidal conditions, phase difference between the voltage applied to a linear two-terminal element or two-terminal circuit and the electric current in the element or circuit. - PhaseDifference - DisplacementAngle - PhaseDifference - https://www.wikidata.org/wiki/Q97222919 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-11-48 - 6-48 - Under sinusoidal conditions, phase difference between the voltage applied to a linear two-terminal element or two-terminal circuit and the electric current in the element or circuit. + Minimum length of a straight line segment between a point and a reference line or reference surface. + Height + Height + https://qudt.org/vocab/quantitykind/Height + https://www.wikidata.org/wiki/Q208826 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-01-21 + https://dbpedia.org/page/Height + 3-1.3 + Minimum length of a straight line segment between a point and a reference line or reference surface. + https://en.wikipedia.org/wiki/Height - - - + + + - MuonAntiNeutrino - MuonAntiNeutrino - - - - - - - T-2 L0 M+1 I0 Θ0 N0 J0 - - - - - ForcePerLengthUnit - ForcePerLengthUnit + RedTopQuark + RedTopQuark - - - - - + + + + + + - + + + + + + + + + + + + + + + + + + + + + + - - - - - - A computer language used to describe simulations. - SimulationLanguage - SimulationLanguage - A computer language used to describe simulations. - https://en.wikipedia.org/wiki/Simulation_language + + + + + RedQuark + RedQuark - - - - An artificial computer language used to express information or knowledge, often for use in computer system design. - ModellingLanguage - ModellingLanguage - An artificial computer language used to express information or knowledge, often for use in computer system design. - Architecture description language – used as a language (or a conceptual model) to describe and represent system architectures. - Hardware description language – used to model integrated circuits. - -Architecture description language – used as a language (or a conceptual model) to describe and represent system architectures. + + + + + Mass of the contained water vapour per volume. + AbsoluteHumidity + MassConcentrationOfWaterVapour + AbsoluteHumidity + https://qudt.org/vocab/quantitykind/AbsoluteHumidity + https://qudt.org/vocab/quantitykind/MassConcentrationOfWaterVapour + https://www.wikidata.org/wiki/Q76378808 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-60 + 5-28 + Mass of the contained water vapour per volume. + -Algebraic Modeling Language which is a high-level programming languages for describing and solving high complexity problems like large-scale optimisation. - https://en.wikipedia.org/wiki/Modeling_language + + + + System program refers to operating systems and utility programs that manage computer resources at a low level enabling a computer to function. + SystemProgram + SystemProgram + System program refers to operating systems and utility programs that manage computer resources at a low level enabling a computer to function. + An operating system. A graphic driver. - - - - - HelmholtzEnergy - HelmholtzFreeEnergy - HelmholtzEnergy - https://www.wikidata.org/wiki/Q865821 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-24 - 5-20.4 - https://doi.org/10.1351/goldbook.H02772 + + + + A supply chain is a system of organizations, people, activities, information, and resources involved in supplying a product or service to a consumer. + SupplyChain + SupplyChain + A supply chain is a system of organizations, people, activities, information, and resources involved in supplying a product or service to a consumer. - + + - + - In geometrical optics, vergence describes the curvature of optical wavefronts. - Vergence - Vergence - http://qudt.org/vocab/quantitykind/Curvature + Quotient of thermal conductivity, and the product of electric conductivity and thermodynamic temperature. + LorenzCoefficient + LorenzNumber + LorenzCoefficient + https://qudt.org/vocab/quantitykind/LorenzCoefficient + https://www.wikidata.org/wiki/Q105728754 + 12-18 + Quotient of thermal conductivity, and the product of electric conductivity and thermodynamic temperature. - + + + + + Direct output of the equipment with the manufacturer’s software including automatic pre-processing that is not modified by the user once the acquisition method is defined and the equipment calibrated. + In some cases, raw data can be considered to have already some level of data processing, e.g., in electron microscopy a “raw image” that is formed on the screen is already result from multiple processing after the signal is acquired by the detector. + + RawData + RawData + Direct output of the equipment with the manufacturer’s software including automatic pre-processing that is not modified by the user once the acquisition method is defined and the equipment calibrated. + The raw data is a set of (unprocessed) data that is given directly as output from the detector, usually expressed as a function of time or position, or photon energy. + In mechanical testing, examples of raw data are raw-force, raw-displacement, coordinates as function of time. + In spectroscopic testing, the raw data are light intensity, or refractive index, or optical absorption as a function of the energy (or wavelength) of the incident light beam. + In some cases, raw data can be considered to have already some level of data processing, e.g., in electron microscopy a “raw image” that is formed on the screen is already result from multiple processing after the signal is acquired by the detector. + + + + + + An interpreter who assigns a name to an object without any motivations related to the object characters. + Namer + Namer + An interpreter who assigns a name to an object without any motivations related to the object characters. + + + + + + GluonType7 + GluonType7 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + The class of individuals that stand for gluons elementary particles. + Gluon + Gluon + The class of individuals that stand for gluons elementary particles. + https://en.wikipedia.org/wiki/Gluon + + + + + + + T-1 L+3 M0 I-1 Θ0 N0 J0 + + + + + ReciprocalElectricChargeDensityUnit + ReciprocalElectricChargeDensityUnit + + + - + - + - Scalar potential of an irrotational magnetic field strength. - ScalarMagneticPotential - ScalarMagneticPotential - https://www.wikidata.org/wiki/Q17162107 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-58 - 6-37.1 - Scalar potential of an irrotational magnetic field strength. + SectionModulus + SectionModulus + https://qudt.org/vocab/quantitykind/SectionModulus + https://www.wikidata.org/wiki/Q1930808 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-31 + 4-22 - - - - A physics-based model based on a physics equation describing the behaviour of continuum volume. - ContinuumModel - ContinuumModel - A physics-based model based on a physics equation describing the behaviour of continuum volume. + + + + + + + + + + + + A measurement unit symbol that do not have a metric prefix as a direct spatial part. + NonPrefixedUnit + NonPrefixedUnit + A measurement unit symbol that do not have a metric prefix as a direct spatial part. - - + + + - For a sinusoidal wave at a given point, velocity in the direction of propagation of the wavefront corresponding to a specified phase. - PhaseVelocity - PhaseSpeed - PhaseVelocity - https://www.wikidata.org/wiki/Q13824 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-10-13 - https://dbpedia.org/page/Phase_velocity - 3-23.1 - For a sinusoidal wave at a given point, velocity in the direction of propagation of the wavefront corresponding to a specified phase. - https://en.wikipedia.org/wiki/Phase_velocity - - - - - - - A process which is an holistic temporal part of an object. - Behaviour - Behaviour - A process which is an holistic temporal part of an object. - Accelerating is a behaviour of a car. - - - - - - a process in which the electric current is kept constant at 0 (i.e., open-circuit conditions) - - OpenCircuitHold - OCVHold - OpenCircuitHold - a process in which the electric current is kept constant at 0 (i.e., open-circuit conditions) - - - - - - For measurements using ion-selective electrodes, the measurement is made under equi- librium conditions what means that the macroscopic electric current is zero and the con- centrations of all species are uniform throughout the solution. The indicator electrode is in direct contact with the analyte solution, whereas the reference electrode is usually separated from the analyte solution by a salt bridge. The potential difference between the indicator and reference electrodes is normally directly proportional to the logarithm of the activity (concentration) of the analyte in the solution (Nernst equation). See also ion selec- tive electrode. - Method of electroanalytical chemistry based on measurement of an electrode potential. - Potentiometric methods are used to measure the electrochemical potentials of a metallic structure in a given environment. - - Potentiometry - Potentiometry - https://www.wikidata.org/wiki/Q900632 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-04-12 - Potentiometric methods are used to measure the electrochemical potentials of a metallic structure in a given environment. - https://doi.org/10.1515/pac-2018-0109 + Vector quantity in a quantum system composed of the vectorial sum of angular momentum L and spin s. + TotalAngularMomentum + TotalAngularMomentum + https://qudt.org/vocab/quantitykind/TotalAngularMomentum + https://www.wikidata.org/wiki/Q97496506 + 10-11 + Vector quantity in a quantum system composed of the vectorial sum of angular momentum L and spin s. - - - - Dielectrometric titrations use dielectrometry for the end-point detection. - The method is used to monitor the purity of dielectrics, for example to detect small amounts of moisture. - electrochemical measurement principle based on the measurement of the dielectric constant of a sample resulting from the orientation of particles (molecules or ions) that have a dipole moment in an electric field - - Dielectrometry - Dielectrometry - electrochemical measurement principle based on the measurement of the dielectric constant of a sample resulting from the orientation of particles (molecules or ions) that have a dipole moment in an electric field - https://doi.org/10.1515/pac-2018-0109 + + + + + + + + + + + + + Measure of the extent and direction an object rotates about a reference point. + AngularMomentum + AngularMomentum + http://qudt.org/vocab/quantitykind/AngularMomentum + 4-11 + https://doi.org/10.1351/goldbook.A00353 - - - - A construction language designed to transform some input text in a certain formal language into a modified output text that meets some specific goal. - TransformationLanguage - TransformationLanguage - A construction language designed to transform some input text in a certain formal language into a modified output text that meets some specific goal. - https://en.wikipedia.org/wiki/Transformation_language - Tritium, XSLT, XQuery, STX, FXT, XDuce, CDuce, HaXml, XMLambda, FleXML + + + + + Reciprocal of the wavelength. + Wavenumber + Repetency + Wavenumber + https://qudt.org/vocab/quantitykind/Wavenumber + https://www.wikidata.org/wiki/Q192510 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-10-11 + https://dbpedia.org/page/Wavenumber + 3-20 + Reciprocal of the wavelength. + https://en.wikipedia.org/wiki/Wavenumber + https://doi.org/10.1351/goldbook.W06664 - - - - - A workflow whose output ca be used as input for another workflow of the same type, iteratively, within the framework of a larger workflow. - IterativeStep - IterativeStep - A workflow whose output ca be used as input for another workflow of the same type, iteratively, within the framework of a larger workflow. - Jacobi method numerical step, involving the multiplication between a matrix A and a vector x, whose result is used to update the vector x. + + + + StandardEquilibriumConstant + ThermodynamicEquilibriumConstant + StandardEquilibriumConstant + https://www.wikidata.org/wiki/Q95993378 + 9-32 + https://doi.org/10.1351/goldbook.S05915 - - - - chronopotentiometry where the applied current is changed in steps - - StepChronopotentiometry - StepChronopotentiometry - chronopotentiometry where the applied current is changed in steps + + + + + + + + + + + + + A material that is obtained through a manufacturing process. + ManufacturedMaterial + EngineeredMaterial + ProcessedMaterial + ManufacturedMaterial + A material that is obtained through a manufacturing process. - - - - A 'process' that is recognized by physical sciences and is categorized accordingly. - While every 'process' in the EMMO involves physical objects, this class is devoted to represent real world objects that express a phenomenon relevant for the ontologist - PhysicalPhenomenon - PhysicalPhenomenon - A 'process' that is recognized by physical sciences and is categorized accordingly. + + + + + Probability that a neutron will not escape from the reactor during the slowing-down process or while it diffuses as a thermal neutron. + NonLeakageProbability + NonLeakageProbability + https://qudt.org/vocab/quantitykind/Non-LeakageProbability + https://www.wikidata.org/wiki/Q99415566 + 10-77 + Probability that a neutron will not escape from the reactor during the slowing-down process or while it diffuses as a thermal neutron. - - - - AlgebricOperator - AlgebricOperator + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + The class of individuals that stand for quarks elementary particles. + Quark + Quark + The class of individuals that stand for quarks elementary particles. + https://en.wikipedia.org/wiki/Quark - - - - A mapping that acts on elements of one space and produces elements of another space. - MathematicalOperator - MathematicalOperator - A mapping that acts on elements of one space and produces elements of another space. - The algebraic operator '+' that acts on two real numbers and produces one real number. - The differential operator that acts on a C1 real function and produces another real function. + + + + No loss or adds of parts by the components, nor merging. In assemblying parts are losing some of theirs movement degrees of freedom. + The act of connecting together the parts of something + Assemblying + Assemblying + The act of connecting together the parts of something + No loss or adds of parts by the components, nor merging. In assemblying parts are losing some of theirs movement degrees of freedom. - - - + + + - Quotient of mass excess and the unified atomic mass constant. - RelativeMassExcess - RelativeMassExcess - https://qudt.org/vocab/quantitykind/RelativeMassExcess - https://www.wikidata.org/wiki/Q98038610 - 10-22.1 - Quotient of mass excess and the unified atomic mass constant. + StandardChemicalPotential + StandardChemicalPotential + https://qudt.org/vocab/quantitykind/StandardChemicalPotential + https://www.wikidata.org/wiki/Q89333468 + 9-21 + https://doi.org/10.1351/goldbook.S05908 - - + + - + - + + + + + + + + + + + + + + + + + + + + + + + + + + + + - A causally bonded system is a system in which there are at least thwo causal paths that are interacting. - PhysicallyInteracting - PhysicallyInteracting - A causally bonded system is a system in which there are at least thwo causal paths that are interacting. + A particle with half odd integer spin (1/2, 3/2, etc...) that follows Fermi-Dirac statistics. + FundamentalFermion + FundamentalFermion + A particle with half odd integer spin (1/2, 3/2, etc...) that follows Fermi-Dirac statistics. + https://en.wikipedia.org/wiki/Fermion + + + + + + historically for the analysis of metal ions, mercury ions were added to the test solution to form a mercury amalgam when reduced. Alternatively, an HMDE or MFE was used and the oxidizing agent added after amalgam formation. However, the toxicity of mercury and its compounds have all but precluded the present-day use of mercury + the accumulation is similar to that used in stripping voltammetry + the stripping potentiogram shows staircase curves of potential as a function of time. Frequently, the first derivative is displayed (dE/dt=f(t)), as this produces peak-shaped signals. The time between transitions (peaks) is proportional to the concentration of analyte in the test solution + the time between changes in potential in step 2 is related to the concentration of analyte in the solution + two-step electrochemical measurement in which 1) material is accumulated at an electrode and 2) the material is removed by chemical reaction or electrochemically at constant current with measurement of electrode potential + + PotentiometricStrippingAnalysis + PSA + PotentiometricStrippingAnalysis + two-step electrochemical measurement in which 1) material is accumulated at an electrode and 2) the material is removed by chemical reaction or electrochemically at constant current with measurement of electrode potential + + + + + + ProductionEngineering + ProductionEngineering + + + + + + Deals with entities that have a undefined shape. Undefined means that the actual shape of the entity that is produced is not relevant for the definition of the process. +In fact, everything has a shape, but in process engineering this is not relevant. + +e.g. the fact that steel comes in sheets is not relevant for the definition of steel material generated in a steel-making process. + ProcessEngineeringProcess + ProcessEngineeringProcess + Deals with entities that have a undefined shape. Undefined means that the actual shape of the entity that is produced is not relevant for the definition of the process. +In fact, everything has a shape, but in process engineering this is not relevant. + +e.g. the fact that steel comes in sheets is not relevant for the definition of steel material generated in a steel-making process. + https://de.wikipedia.org/wiki/Verfahrenstechnik - - - - Cyclic voltammetry is frequently used for the investigation of mechanisms of electrochemi- cal/electrode reactions. The current-potential curve may be modelled to obtain reaction mechanisms and electrochemical parameters. - Normally the initial potential is chosen where no electrode reaction occurs and the switch- ing potential is greater (more positive for an oxidation or more negative for a reduction) than the peak potential of the analyte reaction. - The initial potential is usually the negative or positive limit of the cycle but can have any value between the two limits, as can the initial scan direction. The limits of the potential are known as the switching potentials. - The plot of current against potential is termed a cyclic voltammogram. Usually peak-shaped responses are obtained for scans in both directions. - voltammetry in which the electric current is recorded as the electrode potential is varied with time cycli- cally between two potential limits, normally at a constant scan rate - - CyclicVoltammetry - CV - CyclicVoltammetry - https://www.wikidata.org/wiki/Q1147647 - https://dbpedia.org/page/Cyclic_voltammetry - voltammetry in which the electric current is recorded as the electrode potential is varied with time cycli- cally between two potential limits, normally at a constant scan rate - https://en.wikipedia.org/wiki/Cyclic_voltammetry - https://doi.org/10.1515/pac-2018-0109 + + + + The superclass for all physical quantities classes that are categorized according to some domain of interests (e.g. metallurgy, chemistry), property (intensive/extensive) or application. + CategorizedPhysicalQuantity + https://physics.nist.gov/cuu/Constants + CategorizedPhysicalQuantity + The superclass for all physical quantities classes that are categorized according to some domain of interests (e.g. metallurgy, chemistry), property (intensive/extensive) or application. - - + + + + + + + + + + + + - Neutron spin echo spectroscopy is a high resolution inelastic neutron scattering method probing nanosecond dynamics. Neutron spin echo (NSE) spectroscopy uses the precession of neutron spins in a magnetic field to measure the energy transfer at the sample and decouples the energy resolution from beam characteristics like monochromatisation and collimation. - - NeutronSpinEchoSpectroscopy - NSE - NeutronSpinEchoSpectroscopy - Neutron spin echo spectroscopy is a high resolution inelastic neutron scattering method probing nanosecond dynamics. Neutron spin echo (NSE) spectroscopy uses the precession of neutron spins in a magnetic field to measure the energy transfer at the sample and decouples the energy resolution from beam characteristics like monochromatisation and collimation. + Used to break-down a CharacterisationMeasurementProcess into his specific tasks. + CharacterisationMeasurementTask + CharacterisationMeasurementTask + Used to break-down a CharacterisationMeasurementProcess into his specific tasks. - + - T+2 L0 M-1 I+1 Θ+1 N0 J0 + T-1 L+3 M0 I0 Θ0 N-1 J0 - TemperaturePerMagneticFluxDensityUnit - TemperaturePerMagneticFluxDensityUnit + VolumePerAmountTimeUnit + VolumePerAmountTimeUnit - + + + + Continuous or stepwise pressure forming with one or more rotating tools (rollers), without or with additional tools, e.g. plugs or mandrels, rods, guide tools + Rolling + Walzen + Rolling + + + + + + Riveting + Riveting + + + + + + imaginary part of the admittance + Susceptance + Susceptance + https://qudt.org/vocab/quantitykind/Susceptance + https://www.wikidata.org/wiki/Q509598 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-54 + 6-52.3 + imaginary part of the admittance + + + + + + + Retarding force on a body moving in a fluid. + DragForce + DragForce + https://www.wikidata.org/wiki/Q206621 + 4-9.6 + Retarding force on a body moving in a fluid. + + + - T-2 L0 M0 I0 Θ+1 N0 J0 + T-4 L0 M+1 I0 Θ0 N0 J0 - - TemperaturePerSquareTimeUnit - TemperaturePerSquareTimeUnit + + MassPerQuarticTimeUnit + MassPerQuarticTimeUnit - - - - - A coarse dispersion of liquid in a solid continuum phase. - SolidLiquidSuspension - SolidLiquidSuspension - A coarse dispersion of liquid in a solid continuum phase. + + + + + + + + + + + + + + Extent of an object in space. + Volume + Volume + http://qudt.org/vocab/quantitykind/Volume + https://www.wikidata.org/wiki/Q39297 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=102-04-40 + https://dbpedia.org/page/Volume + 3-4 - - - - - - + + + + A estimation of a property by a criteria based on the pre-existing knowledge of the estimator. + Assignment + Assignment + A estimation of a property by a criteria based on the pre-existing knowledge of the estimator. + The Argon gas in my bottle has ionisation energy of 15.7596 eV. This is not measured but assigned to this material by previous knowledge. + + + + + + + - - + - - - - - FundamentalAntiMatterParticle - FundamentalAntiMatterParticle + + + + + + A determination of an object without any actual interaction. + Estimation + Estimation + A determination of an object without any actual interaction. + + + + + + A standalone atom with an unbalanced number of electrons with respect to its atomic number. + The ion_atom is the basic part of a pure ionic bonded compound i.e. without eclectron sharing, + IonAtom + IonAtom + A standalone atom with an unbalanced number of electrons with respect to its atomic number. + + + + + + Isothermal microcalorimetry (IMC) is a laboratory method for real-time monitoring and dynamic analysis of chemical, physical and biological processes. Over a period of hours or days, IMC determines the onset, rate, extent and energetics of such processes for specimens in small ampoules (e.g. 3–20 ml) at a constant set temperature (c. 15 °C–150 °C). + +IMC accomplishes this dynamic analysis by measuring and recording vs. elapsed time the net rate of heat flow (μJ/s = μW) to or from the specimen ampoule, and the cumulative amount of heat (J) consumed or produced. + + IsothermalMicrocalorimetry + IMC + IsothermalMicrocalorimetry + Isothermal microcalorimetry (IMC) is a laboratory method for real-time monitoring and dynamic analysis of chemical, physical and biological processes. Over a period of hours or days, IMC determines the onset, rate, extent and energetics of such processes for specimens in small ampoules (e.g. 3–20 ml) at a constant set temperature (c. 15 °C–150 °C). + +IMC accomplishes this dynamic analysis by measuring and recording vs. elapsed time the net rate of heat flow (μJ/s = μW) to or from the specimen ampoule, and the cumulative amount of heat (J) consumed or produced. + + + + + + The term "Uniform Resource Name" (URN) has been used historically to refer to both URIs under the "urn" scheme [RFC2141], which are required to remain globally unique and persistent even when the resource ceases to exist or becomes unavailable, and to any other URI with the properties of a name. + URN + URN + The term "Uniform Resource Name" (URN) has been used historically to refer to both URIs under the "urn" scheme [RFC2141], which are required to remain globally unique and persistent even when the resource ceases to exist or becomes unavailable, and to any other URI with the properties of a name. + + + + + + A Uniform Resource Identifier (URI) is a compact sequence of characters that identifies an abstract or physical resource. + URI = scheme ":" ["//" authority] path ["?" query] ["#" fragment] + URI + URI + https://en.wikipedia.org/wiki/File:URI_syntax_diagram.svg + A Uniform Resource Identifier (URI) is a compact sequence of characters that identifies an abstract or physical resource. + URI = scheme ":" ["//" authority] path ["?" query] ["#" fragment] + + + + + + X-ray photoelectron spectroscopy (XPS), also known as ESCA (electron spectroscopy for chemical analysis) is a surface analysis technique which provides both elemental and chemical state information virtually without restriction on the type of material which can be analysed. It is a relatively simple technique where the sample is illuminated with X-rays which have enough energy to eject an electron from the atom. These ejected electrons are known as photoelectrons. The kinetic energy of these emitted electrons is characteristic of the element from which the photoelectron originated. The position and intensity of the peaks in an energy spectrum provide the desired chemical state and quantitative information. The surface sensitivity of XPS is determined by the distance that that photoelectron can travel through the material without losing any kinteic energy. These elastiaclly scattered photoelectrons contribute to the photoelectron peak, whilst photoelectrons that have been inelastically scattered, losing some kinetic energy before leaving the material, will contribute to the spectral background. + XpsVariableKinetic + Electron spectroscopy for chemical analysis (ESCA) + X-ray photoelectron spectroscopy (XPS) + XpsVariableKinetic + X-ray photoelectron spectroscopy (XPS), also known as ESCA (electron spectroscopy for chemical analysis) is a surface analysis technique which provides both elemental and chemical state information virtually without restriction on the type of material which can be analysed. It is a relatively simple technique where the sample is illuminated with X-rays which have enough energy to eject an electron from the atom. These ejected electrons are known as photoelectrons. The kinetic energy of these emitted electrons is characteristic of the element from which the photoelectron originated. The position and intensity of the peaks in an energy spectrum provide the desired chemical state and quantitative information. The surface sensitivity of XPS is determined by the distance that that photoelectron can travel through the material without losing any kinteic energy. These elastiaclly scattered photoelectrons contribute to the photoelectron peak, whilst photoelectrons that have been inelastically scattered, losing some kinetic energy before leaving the material, will contribute to the spectral background. + + + + + + + + + + + + + A set of one or more 'CharacterisationInstruments' and often other devices, including any sample holder, reagent and supply, assembled and adapted to give information used to generate 'MeasuredQuantityProperty' within specified intervals for quantities of specified kinds. + Set of one or more measuring instruments and often other components, assembled and +adapted to give information used to generate measured values within specified intervals for +quantities of specified kinds +NOTE 1 The components mentioned in the definition may be devices, reagents, and supplies. +NOTE 2 A measuring system is sometimes referred to as “measuring equipment” or “device”, for example in ISO 10012, +Measurement management systems – Requirements for measurement processes and measuring equipment and ISO +17025, General requirements for the competence of testing and calibration laboratories. +NOTE 3 Although the terms “measuring system” and “measurement system” are frequently used synonymously, the +latter is instead sometimes used to refer to a measuring system plus all other entities involved in a measurement, +including the object under measurement and the person(s) performing the measurement. +NOTE 4 A measuring system can be used as a measurement standard. + CharacterisationSystem + CharacterisationSystem + Set of one or more measuring instruments and often other components, assembled and +adapted to give information used to generate measured values within specified intervals for +quantities of specified kinds +NOTE 1 The components mentioned in the definition may be devices, reagents, and supplies. +NOTE 2 A measuring system is sometimes referred to as “measuring equipment” or “device”, for example in ISO 10012, +Measurement management systems – Requirements for measurement processes and measuring equipment and ISO +17025, General requirements for the competence of testing and calibration laboratories. +NOTE 3 Although the terms “measuring system” and “measurement system” are frequently used synonymously, the +latter is instead sometimes used to refer to a measuring system plus all other entities involved in a measurement, +including the object under measurement and the person(s) performing the measurement. +NOTE 4 A measuring system can be used as a measurement standard. + A set of one or more 'CharacterisationInstruments' and often other devices, including any sample holder, reagent and supply, assembled and adapted to give information used to generate 'MeasuredQuantityProperty' within specified intervals for quantities of specified kinds. + Measuring system - - + + + - - T0 L-2 M0 I0 Θ0 N0 J+1 + + - - - - LuminanceUnit - LuminanceUnit + + + A set of one or more 'MeasuringInstruments' and often other devices, including any reagent and supply, assembled and adapted to give information used to generate 'MeasuredQuantityProperty' within specified intervals for quantities of specified kinds. + +-- VIM + MeasuringSystem + MeasuringSystem + A set of one or more 'MeasuringInstruments' and often other devices, including any reagent and supply, assembled and adapted to give information used to generate 'MeasuredQuantityProperty' within specified intervals for quantities of specified kinds. + +-- VIM + measuring system - - - - A participant that is the driver of the process. - An agent is not necessarily human. -An agent plays an active role within the process. -An agent is a participant of a process that would not occur without it. - Agent - Agent - A participant that is the driver of the process. - A catalyst. A bus driver. A substance that is initiating a reaction that would not occur without its presence. - An agent is not necessarily human. -An agent plays an active role within the process. -An agent is a participant of a process that would not occur without it. + + + + + + + + + + + + + + + A variable that stand for a well known numerical constant (a known number). + KnownConstant + KnownConstant + A variable that stand for a well known numerical constant (a known number). + π refers to the constant number ~3.14 - - - - At about 25 °C aqueous solutions with: -pH < 7 are acidic; -pH = 7 are neutral; -pH > 7 are alkaline. -At temperatures far from 25 °C the pH of a neutral solution differs significantly from 7. - Number quantifying the acidic or the alkaline character of a solution, equal to the negative of the decimal logarithm of ion activity aH+ of the hydrogen cation H+ -pH = −10 log(a_H+). - Written as pH - PH - PH - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-01-21 - For more details, see ISO 80000-9:2009, Annex C - Number quantifying the acidic or the alkaline character of a solution, equal to the negative of the decimal logarithm of ion activity aH+ of the hydrogen cation H+ -pH = −10 log(a_H+). - https://doi.org/10.1351/goldbook.P04524 + + + + A variable that stand for a numerical constant, even if it is unknown. + Constant + Constant + A variable that stand for a numerical constant, even if it is unknown. - - + + + + + + - - T-2 L+1 M+1 I0 Θ0 N0 J0 + + - - + - ForceUnit - ForceUnit + Quotient of the linear attenuation coefficient µ and the number density, n, of atoms in the substance. + AtomicAttenuationCoefficient + AtomicAttenuationCoefficient + https://www.wikidata.org/wiki/Q98592911 + 10-52 + Quotient of the linear attenuation coefficient µ and the number density, n, of atoms in the substance. - - + + + + + + + + + + + + + 1 + + - Data resulting from the application of post-processing or model generation to other data. - - SecondaryData - Elaborated data - SecondaryData - Data resulting from the application of post-processing or model generation to other data. - Deconvoluted curves - Intensity maps - + Operation performed on a measuring instrument or a measuring system that, under specified conditions +1. establishes a relation between the values with measurement uncertainties provided by measurement standards and corresponding indications with associated measurement uncertainties and +2. uses this information to establish a relation for obtaining a measurement result from an indication +NOTE 1 The objective of calibration is to provide traceability of measurement results obtained when using a calibrated measuring instrument or measuring system. +NOTE 2 The outcome of a calibration may be expressed by a statement, calibration function, calibration diagram, calibration curve, or calibration table. In some cases, it may consist of an additive or multiplicative correction of the indication with associated measurement uncertainty. +NOTE 3 Calibration should not be confused with adjustment of a measuring system, often mistakenly called “selfcalibration”, nor with verification of calibration. Calibration is sometimes a prerequisite for verification, which provides confirmation that specified requirements (often maximum permissible errors) are met. Calibration is sometimes also a prerequisite for adjustment, which is the set of operations carried out on a measuring system such that the system provides prescribed indications corresponding to given values of quantities being measured, typically obtained from +measurement standards. +NOTE 4 Sometimes the first step alone of the operation mentioned in the definition is intended as being calibration, as it was in previous editions of this Vocabulary. The second step is in fact required to establish instrumental uncertainty +for the measurement results obtained when using the calibrated measuring system. The two steps together aim to demonstrate the metrological traceability of measurement results obtained by a calibrated measuring system. In the +past the second step was usually considered to occur after the calibration. +NOTE 5 A comparison between two measurement standards may be viewed as a calibration if the comparison is used to check and, if necessary, correct the value and measurement uncertainty attributed to one of the measurement +standards. - - - - - A neutrino belonging to the first generation of leptons. - ElectronNeutrino - ElectronNeutrino - A neutrino belonging to the first generation of leptons. - https://en.wikipedia.org/wiki/Electron_neutrino +-- International Vocabulary of Metrology(VIM) + Sequence of operations/actions that are needed to convert the initial signal (as produced by the detector) into a meaningful and useable raw data. + Usually the calibration process involve a reference sample (with pre-defined, specific, and stable physical characteristics and known properties), in order to extract calibration data. In this way, the accuracy of the measurement tool and its components (for example the probe) will be evaluated and confirmed. + CalibrationProcess + CalibrationProcess + Operation performed on a measuring instrument or a measuring system that, under specified conditions +1. establishes a relation between the values with measurement uncertainties provided by measurement standards and corresponding indications with associated measurement uncertainties and +2. uses this information to establish a relation for obtaining a measurement result from an indication +NOTE 1 The objective of calibration is to provide traceability of measurement results obtained when using a calibrated measuring instrument or measuring system. +NOTE 2 The outcome of a calibration may be expressed by a statement, calibration function, calibration diagram, calibration curve, or calibration table. In some cases, it may consist of an additive or multiplicative correction of the indication with associated measurement uncertainty. +NOTE 3 Calibration should not be confused with adjustment of a measuring system, often mistakenly called “selfcalibration”, nor with verification of calibration. Calibration is sometimes a prerequisite for verification, which provides confirmation that specified requirements (often maximum permissible errors) are met. Calibration is sometimes also a prerequisite for adjustment, which is the set of operations carried out on a measuring system such that the system provides prescribed indications corresponding to given values of quantities being measured, typically obtained from +measurement standards. +NOTE 4 Sometimes the first step alone of the operation mentioned in the definition is intended as being calibration, as it was in previous editions of this Vocabulary. The second step is in fact required to establish instrumental uncertainty +for the measurement results obtained when using the calibrated measuring system. The two steps together aim to demonstrate the metrological traceability of measurement results obtained by a calibrated measuring system. In the +past the second step was usually considered to occur after the calibration. +NOTE 5 A comparison between two measurement standards may be viewed as a calibration if the comparison is used to check and, if necessary, correct the value and measurement uncertainty attributed to one of the measurement +standards. + +-- International Vocabulary of Metrology(VIM) + Sequence of operations/actions that are needed to convert the initial signal (as produced by the detector) into a meaningful and useable raw data. + In nanoindentation, the electrical signal coming from capacitive displacement gauge is converted into a real raw-displacement signal after using a proper calibration function (as obtained by the equipment manufacturer). Then, additional calibration procedures are applied to define the point of initial contact and to correct for instrument compliance, thermal drift, and indenter area function to obtain the real useable displacement data. + Usually the calibration process involve a reference sample (with pre-defined, specific, and stable physical characteristics and known properties), in order to extract calibration data. In this way, the accuracy of the measurement tool and its components (for example the probe) will be evaluated and confirmed. - - - - - A liquid solution made of two or more component substances. - LiquidSolution - LiquidSolution - A liquid solution made of two or more component substances. + + + + Neutron spin echo spectroscopy is a high resolution inelastic neutron scattering method probing nanosecond dynamics. Neutron spin echo (NSE) spectroscopy uses the precession of neutron spins in a magnetic field to measure the energy transfer at the sample and decouples the energy resolution from beam characteristics like monochromatisation and collimation. + + NeutronSpinEchoSpectroscopy + NSE + NeutronSpinEchoSpectroscopy + Neutron spin echo spectroscopy is a high resolution inelastic neutron scattering method probing nanosecond dynamics. Neutron spin echo (NSE) spectroscopy uses the precession of neutron spins in a magnetic field to measure the energy transfer at the sample and decouples the energy resolution from beam characteristics like monochromatisation and collimation. - - - - Parameter for diffusion and fluid flow in porous media. - Tortuosity - Tortuosity - https://www.wikidata.org/wiki/Q2301683 - Parameter for diffusion and fluid flow in porous media. + + + + The term "Uniform Resource Locator" (URL) refers to the subset of URIs that, in addition to identifying a resource, provide a means of locating the resource by describing its primary access mechanism (e.g., its network "location"). + URL + URL + The term "Uniform Resource Locator" (URL) refers to the subset of URIs that, in addition to identifying a resource, provide a means of locating the resource by describing its primary access mechanism (e.g., its network "location"). - - - - - T-3 L-1 M+1 I0 Θ0 N0 J0 - - - - - PressurePerTimeUnit - PressurePerTimeUnit + + + + A CausalSystem whose quantum parts are all bonded to the rest of the system. + It is natural to define entities made or more than one smaller parts according to some unity criteria. One of the most general one applicable to causal systems is to ask that all the quantum parts of the system are bonded to the rest. +In other words, causal convexity excludes all quantums that leave the system (no more interacting), or that are not yet part of it (not yet interacting). +So, a photon leaving a body is not part of the body as convex system, while a photon the is carrier of electromagnetic interaction between two molecular parts of the body, is part of the convex body. + CausalConvexSystem + CausalConvexSystem + It is natural to define entities made or more than one smaller parts according to some unity criteria. One of the most general one applicable to causal systems is to ask that all the quantum parts of the system are bonded to the rest. +In other words, causal convexity excludes all quantums that leave the system (no more interacting), or that are not yet part of it (not yet interacting). +So, a photon leaving a body is not part of the body as convex system, while a photon the is carrier of electromagnetic interaction between two molecular parts of the body, is part of the convex body. + A CausalSystem whose quantum parts are all bonded to the rest of the system. - - - - - Measure of the tendency of a solution to take in pure solvent by osmosis. - OsmoticPressure - OsmoticPressure - https://qudt.org/vocab/quantitykind/OsmoticPressure - https://www.wikidata.org/wiki/Q193135 - 9-28 - Measure of the tendency of a solution to take in pure solvent by osmosis. - https://doi.org/10.1351/goldbook.O04344 + + + + + + + + + + + + + + + A standalone atom can be bonded with other atoms by intermolecular forces (i.e. dipole–dipole, London dispersion force, hydrogen bonding), since this bonds does not involve electron sharing. + An atom that does not share electrons with other atoms. + StandaloneAtom + StandaloneAtom + An atom that does not share electrons with other atoms. - - - - - - - - - - - + + - The human operator who takes care of the whole characterisation method or sub-processes/stages. + DC polarography with current sampling at the end of each drop life mechanically enforced by a knocker at a preset drop time value. The current sampling and mechanical drop dislodge are synchronized. + In this way, the ratio of faradaic current to double layer charging current is enhanced and the negative influence of charging current is partially eliminated. Due to the improved signal (faradaic current) to noise (charging current) ratio, the limit of detection is lowered. - Operator - Operator - The human operator who takes care of the whole characterisation method or sub-processes/stages. + SampledDCPolarography + TASTPolarography + SampledDCPolarography + DC polarography with current sampling at the end of each drop life mechanically enforced by a knocker at a preset drop time value. The current sampling and mechanical drop dislodge are synchronized. + https://doi.org/10.1515/pac-2018-0109 - - - - An agent that is driven by the intention to reach a defined objective in driving a process. - Intentionality is not limited to human agents, but in general to all agents that have the capacity to decide to act in driving a process according to a motivation. - IntentionalAgent - IntentionalAgent - An agent that is driven by the intention to reach a defined objective in driving a process. - Intentionality is not limited to human agents, but in general to all agents that have the capacity to decide to act in driving a process according to a motivation. + + + + Linear scan voltammetry with slow scan rate in which a dropping mercury electrode is used as the working electrode. If the whole scan is performed on a single growing drop, the technique should be called single drop scan voltammetry. The term polarography in this context is discouraged. This is the oldest variant of polarographic techniques, introduced by Jaroslav Heyrovský (1890 – 1967). Usually the drop time is between 1 and 5 s and the pseudo-steady-state wave-shaped dependence on potential is called a polarogram. If the limiting current is controlled by diffusion, it is expressed by the Ilkovich equation. + DCPolarography + DCPolarography + Linear scan voltammetry with slow scan rate in which a dropping mercury electrode is used as the working electrode. If the whole scan is performed on a single growing drop, the technique should be called single drop scan voltammetry. The term polarography in this context is discouraged. This is the oldest variant of polarographic techniques, introduced by Jaroslav Heyrovský (1890 – 1967). Usually the drop time is between 1 and 5 s and the pseudo-steady-state wave-shaped dependence on potential is called a polarogram. If the limiting current is controlled by diffusion, it is expressed by the Ilkovich equation. + https://doi.org/10.1515/pac-2018-0109 - - - - - - - - - - - + + + - SpecificEntropy - SpecificEntropy - https://qudt.org/vocab/quantitykind/SpecificEntropy - https://www.wikidata.org/wiki/Q69423705 - 5-19 + Written as pOH + number quantifying the acidic or the alkaline character of a solution, equal to the negative of the decimal logarithm of ion activity aOH- of the hydroxide anion OH- +pH = −10 log(a_OH-) + POH + POH + number quantifying the acidic or the alkaline character of a solution, equal to the negative of the decimal logarithm of ion activity aOH- of the hydroxide anion OH- +pH = −10 log(a_OH-) - - - - - - - - - - - - + + - Energy imparted to matter by ionizing radiation in a suitable small element of volume divided by the mass of that element of volume. - AbsorbedDose - AbsorbedDose - http://qudt.org/vocab/quantitykind/AbsorbedDose - Energy imparted to matter by ionizing radiation in a suitable small element of volume divided by the mass of that element of volume. - 10-81.1 - https://doi.org/10.1351/goldbook.A00031 + Normally a standard solution is a solution of the ion at a molality of 1 mol/kg (exactly). Standardized conditions are normally 1013,25 hPa and 25 °C. + The correction factor is called activity coefficient and it is determined experimentally. See ActivityCoefficient + ratio of the product of ion molality b and a correction factor γ to the molality b° of the same ion in a standard solution under standardized conditions: a = bγ / b°. + IonActivity + IonActivity + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-01-20 + ratio of the product of ion molality b and a correction factor γ to the molality b° of the same ion in a standard solution under standardized conditions: a = bγ / b°. - - - + + - In nuclear physics, energy imparted per mass. - SpecificEnergyImparted - SpecificEnergyImparted - https://qudt.org/vocab/quantitykind/SpecificEnergyImparted - https://www.wikidata.org/wiki/Q99566195 - 10-81.2 - In nuclear physics, energy imparted per mass. + At about 25 °C aqueous solutions with: +pH < 7 are acidic; +pH = 7 are neutral; +pH > 7 are alkaline. +At temperatures far from 25 °C the pH of a neutral solution differs significantly from 7. + Number quantifying the acidic or the alkaline character of a solution, equal to the negative of the decimal logarithm of ion activity aH+ of the hydrogen cation H+ +pH = −10 log(a_H+). + Written as pH + PH + PH + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-01-21 + For more details, see ISO 80000-9:2009, Annex C + Number quantifying the acidic or the alkaline character of a solution, equal to the negative of the decimal logarithm of ion activity aH+ of the hydrogen cation H+ +pH = −10 log(a_H+). + https://doi.org/10.1351/goldbook.P04524 - - - - - T-3 L+2 M0 I0 Θ0 N0 J0 - - - - - AbsorbedDoseRateUnit - AbsorbedDoseRateUnit + + + + + BlueTopQuark + BlueTopQuark - + + + + Numeral + Numeral + + + - T-1 L0 M0 I0 Θ+1 N0 J0 + T+2 L+2 M-1 I+2 Θ0 N0 J0 - TemperaturePerTimeUnit - TemperaturePerTimeUnit - - - - - - PlasticSintering - PlasticSintering - - - - - - The derivative of the electric charge of a system with respect to the area. - SurfaceDensityOfElectricCharge - AreicElectricCharge - SurfaceChargeDensity - SurfaceDensityOfElectricCharge - https://www.wikidata.org/wiki/Q12799324 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-08 - 6-4 - The derivative of the electric charge of a system with respect to the area. - https://doi.org/10.1351/goldbook.S06159 - - - - - - - An object which is an holistic spatial part of a process. - Participant - Participant - An object which is an holistic spatial part of a process. - A student during an examination. + EnergyPerSquareMagneticFluxDensityUnit + EnergyPerSquareMagneticFluxDensityUnit - + + - - + - quotient of the amount of substance nB of solute B by the mass m of the solvent: bB = nB / m. - Molality - AmountPerMass - Molality - https://www.wikidata.org/wiki/Q172623 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-01-19 - 9-15 - quotient of the amount of substance nB of solute B by the mass m of the solvent: bB = nB / m. - https://doi.org/10.1351/goldbook.M03970 + Quotient of the linear attenuation coefficient µ and the mass density ρ of the medium. + MassAttenuationCoefficient + MassAttenuationCoefficient + https://qudt.org/vocab/quantitykind/MassAttenuationCoefficient + https://www.wikidata.org/wiki/Q98591983 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-04-27 + 10-50 + Quotient of the linear attenuation coefficient µ and the mass density ρ of the medium. - - - - - A functional icon that imitates the behaviour of the object through mathematical evaluations of some mathematical construct. - The equation that describes the velocity of a uniform accelerated body v = v0 + a*t is a functional icon. In general every analitical solution of a mathematical model can be considered an icon. A functional icon expresses its similarity with the object when is part of a process the makes it imitate the behavior of the object. In the case of v = v0 + a*t, plotting the velocity over time or listing their values at certain instants is when the icon expresses it functionality. - PhysicsMathematicalComputation - PhysicsMathematicalComputation - A functional icon that imitates the behaviour of the object through mathematical evaluations of some mathematical construct. - The equation that describes the velocity of a uniform accelerated body v = v0 + a*t is a functional icon. In general every analitical solution of a mathematical model can be considered an icon. A functional icon expresses its similarity with the object when is part of a process the makes it imitate the behavior of the object. In the case of v = v0 + a*t, plotting the velocity over time or listing their values at certain instants is when the icon expresses it functionality. + + + + + An object that has been designed and manufactured for a particular purpose. + ManufacturedProduct + Artifact + Engineered + TangibleProduct + ManufacturedProduct + An object that has been designed and manufactured for a particular purpose. + Car, tire, composite material. + + + + + + + Position vector of a particle. + ParticlePositionVector + ParticlePositionVector + https://qudt.org/vocab/quantitykind/ParticlePositionVector + https://www.wikidata.org/wiki/Q105533324 + 12-7.1 + Position vector of a particle. - - - - - The class of individuals that stand for tau elementary particles belonging to the third generation of leptons. - Tau - Tau - The class of individuals that stand for tau elementary particles belonging to the third generation of leptons. - https://en.wikipedia.org/wiki/Tau_(particle) + + + + Scanning Tunneling Microscopy, or STM, is an imaging technique used to obtain ultra-high resolution images at the atomic scale, without using light or electron beams. + + ScanningTunnelingMicroscopy + STM + ScanningTunnelingMicroscopy + Scanning Tunneling Microscopy, or STM, is an imaging technique used to obtain ultra-high resolution images at the atomic scale, without using light or electron beams. - + - T-1 L+1 M0 I0 Θ+1 N0 J0 + T0 L0 M0 I0 Θ0 N0 J+1 - TemperatureLengthPerTimeUnit - TemperatureLengthPerTimeUnit + LuminousIntensityUnit + LuminousIntensityUnit - - - - Manufacturing by separating particles of material from a solid body by non-mechanical means. Ablation refers both to the removal of layers of material and to the separation of workpiece parts. The production process of ablation is considered in its stationary instantaneous state, independently of the application of auxiliary processes necessary to initiate the process. Ablation is divided into three subgroups according to the order point of view (OGP) "process in the effective zone on the surface of the workpiece": - thermal ablation; - chemical ablation; - electrochemical ablation. - Ablation - Abtragen - Ablation + + + + + T0 L+4 M0 I0 Θ0 N0 J0 + + + + + QuarticLengthUnit + QuarticLengthUnit - - - + + - Critical thermodynamic temperature of a superconductor. - SuperconductionTransitionTemperature - SuperconductionTransitionTemperature - https://qudt.org/vocab/quantitykind/SuperconductionTransitionTemperature - https://www.wikidata.org/wiki/Q106103037 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=815-10-09 - 12-35.3 - Critical thermodynamic temperature of a superconductor. + The energy possessed by a body by virtue of its position or orientation in a potential field. + PotentialEnergy + PotentialEnergy + http://qudt.org/vocab/quantitykind/PotentialEnergy + 4-28.1 + The energy possessed by a body by virtue of its position or orientation in a potential field. + https://doi.org/10.1351/goldbook.P04778 - - - - Temperature below which quantum effects dominate. - CriticalTemperature - CriticalTemperature - https://www.wikidata.org/wiki/Q1450516 - Temperature below which quantum effects dominate. + + + + LiquidPhaseSintering + ISO 3252:2019 Powder metallurgy +liquid-phase sintering: sintering of a powder or compact containing at least two constituents, under conditions such that a liquid phase is formed + LiquidPhaseSintering - - - - A well-formed formula in computer science may be or not be interpreted by a computer. For example pseudo-code is only intended for human consumption. - A well-formed formula that follows the syntactic rules of computer science. - ComputerScience - ComputerScience - A well-formed formula that follows the syntactic rules of computer science. - A well-formed formula in computer science may be or not be interpreted by a computer. For example pseudo-code is only intended for human consumption. + + + + Screwing (screwing on, screwing in, screwing tight) is joining by pressing on by means of a self-locking thread (from: DIN 8593 Part 3/09.85). + Screwing + Schrauben + Screwing + + + + + + + A functional icon that imitates the behaviour of the object through mathematical evaluations of some mathematical construct. + The equation that describes the velocity of a uniform accelerated body v = v0 + a*t is a functional icon. In general every analitical solution of a mathematical model can be considered an icon. A functional icon expresses its similarity with the object when is part of a process the makes it imitate the behavior of the object. In the case of v = v0 + a*t, plotting the velocity over time or listing their values at certain instants is when the icon expresses it functionality. + PhysicsMathematicalComputation + PhysicsMathematicalComputation + A functional icon that imitates the behaviour of the object through mathematical evaluations of some mathematical construct. + The equation that describes the velocity of a uniform accelerated body v = v0 + a*t is a functional icon. In general every analitical solution of a mathematical model can be considered an icon. A functional icon expresses its similarity with the object when is part of a process the makes it imitate the behavior of the object. In the case of v = v0 + a*t, plotting the velocity over time or listing their values at certain instants is when the icon expresses it functionality. + + + + + + The imaginary part of the impedance. + The opposition of a circuit element to a change in current or voltage, due to that element's inductance or capacitance. + ElectricReactance + Reactance + ElectricReactance + http://qudt.org/vocab/quantitykind/Reactance + https://www.wikidata.org/wiki/Q193972 + 6-51.3 + The imaginary part of the impedance. + https://en.wikipedia.org/wiki/Electrical_reactance + https://doi.org/10.1351/goldbook.R05162 @@ -16810,519 +15981,497 @@ pH = −10 log(a_H+). ReciprocalMassUnit - - - - - - - - - - - - - - A determination of an object without any actual interaction. - Estimation - Estimation - A determination of an object without any actual interaction. - - - - - - - T-1 L-1 M0 I0 Θ0 N0 J0 - - - + + + - PerLengthTimeUnit - PerLengthTimeUnit + distance between successive lattice planes + LatticePlaneSpacing + LatticePlaneSpacing + https://qudt.org/vocab/quantitykind/LatticePlaneSpacing + https://www.wikidata.org/wiki/Q105488046 + 12-3 + distance between successive lattice planes - + - In an infinite medium, the quotient of the number of thermal neutrons absorbed in a fissionable nuclide or in a nuclear fuel, as specified, and the total number of thermal neutrons absorbed. - ThermalUtilizationFactor - ThermalUtilizationFactor - https://qudt.org/vocab/quantitykind/ThermalUtilizationFactor - https://www.wikidata.org/wiki/Q99197650 - 10-76 - In an infinite medium, the quotient of the number of thermal neutrons absorbed in a fissionable nuclide or in a nuclear fuel, as specified, and the total number of thermal neutrons absorbed. + Quotient of the total mean charge of all positive ions produced by an ionizing charged particle along its entire path and along the paths of any secondary charged particles, and the elementary charge. + TotalIonization + TotalIonization + https://qudt.org/vocab/quantitykind/TotalIonization + https://www.wikidata.org/wiki/Q98690787 + 10-59 + Quotient of the total mean charge of all positive ions produced by an ionizing charged particle along its entire path and along the paths of any secondary charged particles, and the elementary charge. - - - + + + - in a metal, highest occupied energy level at zero thermodynamic temperature, where energy level means the energy of an electron in the interior of a substance - FermiEnergy - FermiEnergy - https://qudt.org/vocab/quantitykind/FermiEnergy - https://www.wikidata.org/wiki/Q431335 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-06-18 - 12-27.1 - in a metal, highest occupied energy level at zero thermodynamic temperature, where energy level means the energy of an electron in the interior of a substance - https://doi.org/10.1351/goldbook.F02340 - - - - - - Heat treatment process that generally produces martensite in the matrix. - Hardening - Hardening - Heat treatment process that generally produces martensite in the matrix. + CanonicalPartitionFunction + CanonicalPartitionFunction + https://qudt.org/vocab/quantitykind/CanonicalPartitionFunction + https://www.wikidata.org/wiki/Q96142389 + 9-35.2 - - - + + + - Angular frequency divided by angular wavenumber. - PhaseSpeedOfElectromagneticWaves - PhaseSpeedOfElectromagneticWaves - https://qudt.org/vocab/quantitykind/ElectromagneticWavePhaseSpeed - https://www.wikidata.org/wiki/Q77990619 - 6-35.1 - Angular frequency divided by angular wavenumber. - - - - - - Unit for quantities of dimension one that are the fraction of two speeds. - SpeedFractionUnit - SpeedFractionUnit - Unit for quantities of dimension one that are the fraction of two speeds. - Unit for refractive index. + Sum of energies deposited by ionizing radiation in a given volume. + EnergyImparted + EnergyImparted + https://qudt.org/vocab/quantitykind/EnergyImparted + https://www.wikidata.org/wiki/Q99526944 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-34 + 10-80.1 + Sum of energies deposited by ionizing radiation in a given volume. - - - - - For a solvent in a solution, quotient of the absolute activity and that of the pure substance at the same temperature and pressure. - ActivityOfSolvent - ActivityOfSolvent - https://www.wikidata.org/wiki/Q89486193 - 9-27.1 - For a solvent in a solution, quotient of the absolute activity and that of the pure substance at the same temperature and pressure. + + + + A direct part that is obtained by partitioning a whole purely in temporal parts. + TemporalTile + TemporalTile + A direct part that is obtained by partitioning a whole purely in temporal parts. - - - - Differential Pulse Voltammetry in which small potential pulses are superimposed onto a linearly varying potential. - - DifferentialLinearPulseVoltammetry - DifferentialLinearPulseVoltammetry - Differential Pulse Voltammetry in which small potential pulses are superimposed onto a linearly varying potential. + + + + + average distance that phonons travel between two successive interactions + MeanFreePathOfPhonons + MeanFreePathOfPhonons + https://qudt.org/vocab/quantitykind/PhononMeanFreePath + https://www.wikidata.org/wiki/Q105672255 + 12-15.1 + average distance that phonons travel between two successive interactions - - + + - Differential pulse polarography is differential pulse voltammetry in which a dropping mercury electrode is used as the working electrode. A pulse is applied before the mechani- cally enforced end of the drop and the current is sampled twice: just before the onset of the pulse and just before its end. The pulse width is usually 10 to 20 % of the drop life. The drop dislodgement is synchronized with current sampling, which is carried out as in DPV. - The ratio of faradaic current to charging current is enhanced and the negative influence of charging current is partially eliminated in the same way as in normal pulse voltammetry (NPV). Moreover, subtraction of the charging current sampled before the application of the pulse further decreases its negative influence. Due to the more enhanced signal (faradaic current) to noise (charging current) ratio, the limit of detection is lower than with NPV. - The sensitivity of DPV depends on the reversibility of the electrode reaction of the analyte. - voltammetry in which small potential pulses (constant height 10 to 100 mV, constant width 10 to 100 ms) are superimposed onto a linearly varying potential or onto a staircase potential ramp. The current is sampled just before the onset of the pulse (e.g. 10 to 20 ms) and for the same sampling time just before the end of the pulse. The difference between the two sampled currents is plotted versus the potential applied before the pulse. Thus, a differential pulse voltammogram is peak-shaped - DifferentialPulseVoltammetry - DPV - DifferentialPulseVoltammetry - https://www.wikidata.org/wiki/Q5275361 - voltammetry in which small potential pulses (constant height 10 to 100 mV, constant width 10 to 100 ms) are superimposed onto a linearly varying potential or onto a staircase potential ramp. The current is sampled just before the onset of the pulse (e.g. 10 to 20 ms) and for the same sampling time just before the end of the pulse. The difference between the two sampled currents is plotted versus the potential applied before the pulse. Thus, a differential pulse voltammogram is peak-shaped - https://en.wikipedia.org/wiki/Differential_pulse_voltammetry - https://doi.org/10.1515/pac-2018-0109 + ShearOrTorsionTesting + ShearOrTorsionTesting - - - - A mathematical string that express a relation between the elements in one set X to elements in another set Y. - The set X is called domain and the set Y range or codomain. - MathematicalFormula - MathematicalFormula - A mathematical string that express a relation between the elements in one set X to elements in another set Y. + + + + + BlueBottomQuark + BlueBottomQuark - - - - - - - - - - - - - - - - - - - MathematicalConstruct - MathematicalConstruct + + + + + + + + + + + + + + + + + + + + + BottomQuark + BottomQuark + https://en.wikipedia.org/wiki/Bottom_quark - - - + + - Forming of a solid body, whereby the plastic state is essentially brought about by a bending stress - Bending - Bending + Cutting workpieces between two cutting edges that move past each other (see Figure 1 [see figure in the standard]). + ShearCutting + Scherschneiden + ShearCutting - - - - Forming of a solid body, whereby the plastic state is essentially brought about by a bending stress. - FlexuralForming - Biegeumformen - FlexuralForming + + + + A software application to process characterisation data + CharacterisationSoftware + CharacterisationSoftware + A software application to process characterisation data + In Nanoindentation post-processing the software used to apply the Oliver-Pharr to calculate the characterisation properties (i.e. elastic modulus, hardness) from load and depth data. Describes why the characterization procedure was chosen and deemed to be the most useful for the sample. - CharacterisationProcedureValidation CharacterisationProcedureValidation Describes why the characterization procedure was chosen and deemed to be the most useful for the sample. - - - - - Factor by which the intensity of a diffraction line is reduced because of the lattice vibrations. - DebyeWallerFactor - DebyeWallerFactor - https://qudt.org/vocab/quantitykind/Debye-WallerFactor - https://www.wikidata.org/wiki/Q902587 - 12-8 - Factor by which the intensity of a diffraction line is reduced because of the lattice vibrations. - - - - - - A well-formed finite combination of mathematical symbols according to some specific rules. - Expression - Expression - A well-formed finite combination of mathematical symbols according to some specific rules. - - - - - - - For normal cases, the relative humidity may be assumed to be equal to relative mass concentration of vapour. - ratio of the mass concentration of water vapour v to its mass concentration at saturation vsat, at the same temperature, thus ψ = v/vsat. - RelativeMassConcentrationOfWaterVapour - RelativeMassConcentrationOfWaterVapour - https://qudt.org/vocab/quantitykind/RelativeMassConcentrationOfVapour - https://www.wikidata.org/wiki/Q76379357 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-66 - ratio of the mass concentration of water vapour v to its mass concentration at saturation vsat, at the same temperature, thus ψ = v/vsat. - + + + + "Property of a phenomenon, body, or substance, where the property has no magnitude." - - - - InspectionDevice - InspectionDevice - +"A nominal property has a value, which can be expressed in words, by alphanumerical codes, or by other means." - - - - - T0 L0 M-2 I0 Θ0 N0 J0 - - - - - InverseSquareMassUnit - InverseSquareMassUnit - +International vocabulary of metrology (VIM) + An 'ObjectiveProperty' that cannot be quantified. + NominalProperty + NominalProperty + An 'ObjectiveProperty' that cannot be quantified. + CFC is a 'sign' that stands for the fact that the morphology of atoms composing the microstructure of an entity is predominantly Cubic Face Centered - - - - - Position vector of a particle. - ParticlePositionVector - ParticlePositionVector - https://qudt.org/vocab/quantitykind/ParticlePositionVector - https://www.wikidata.org/wiki/Q105533324 - 12-7.1 - Position vector of a particle. - +A color is a nominal property. - - - - Length in a given direction regarded as horizontal. - The terms breadth and width are often used by convention, as distinguished from length and from height or thickness. - Width - Breadth - Width - https://qudt.org/vocab/quantitykind/Width - https://www.wikidata.org/wiki/Q35059 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-01-20 - 3-1.2 - Length in a given direction regarded as horizontal. +Sex of a human being. + nominal property - - + + - MergingManufacturing - AddingManufacturing - MergingManufacturing - - - - - - - DebyeTemperature - DebyeTemperature - https://qudt.org/vocab/quantitykind/DebyeTemperature - https://www.wikidata.org/wiki/Q3517821 - 12-11 - - - - - - Suggestion of Rickard Armiento - CrystallineMaterial - CrystallineMaterial + UndefinedEdgeCutting + Spanen mit geometrisch unbestimmten Schneiden + UndefinedEdgeCutting - - - - In general, for a given set of information, it is understood that the measurement uncertainty is associated with a stated quantity value. A modification of this value results in a modification of the associated uncertainty. - Metrological uncertainty in EMMO is a slight generalisation of the VIM term 'measurement uncertainty', which is defined as "a non-negative parameter characterising the dispersion of the quantity being measured". - Metrological uncertainty includes components arising from systematic effects, such as components associated with corrections and the assigned quantity values of measurement standards, as well as the definitional uncertainty. Sometimes estimated systematic effects are not corrected for but, instead, associated measurement uncertainty components are incorporated. - The uncertainty of a quantity obtained through a well-defined procedure, characterising of the dispersion of the quantity. - MetrologicalUncertainty - A metrological uncertainty can be assigned to any objective property via the 'hasMetrologicalUncertainty' relation. - MetrologicalUncertainty - The uncertainty of a quantity obtained through a well-defined procedure, characterising of the dispersion of the quantity. - - Standard deviation -- Half-width of an interval with a stated coverage probability - Metrological uncertainty in EMMO is a slight generalisation of the VIM term 'measurement uncertainty', which is defined as "a non-negative parameter characterising the dispersion of the quantity being measured". + + + + Array subclasses with a specific shape can be constructed with cardinality restrictions. + +See Shape4x3Matrix as an example. + Arrays are ordered mathematical objects who's elementary spatial parts are numbers. Their dimensionality is constructed with spatial direct parthood, where 1-dimensional arrays have spatial direct parts Number and n-dimensional array have spatial direct parts (n-1)-dimensional arrays. + Arrays are ordered objects, since they are a subclasses of Arrangement. + Array + Array + Arrays are ordered mathematical objects who's elementary spatial parts are numbers. Their dimensionality is constructed with spatial direct parthood, where 1-dimensional arrays have spatial direct parts Number and n-dimensional array have spatial direct parts (n-1)-dimensional arrays. + A Vector is a 1-dimensional Array with Number as spatial direct parts, +a Matrix is a 2-dimensional Array with Vector as spatial direct parts, +an Array3D is a 3-dimensional Array with Matrix as spatial direct parts, +and so forth... - - + + + + + + + + + + - Cut-off angular wavenumber in the Debye model of the vibrational spectrum of a solid. - DebyeAngularWaveNumber - DebyeAngluarRepetency - DebyeAngularWaveNumber - https://qudt.org/vocab/quantitykind/DebyeAngularWavenumber - https://www.wikidata.org/wiki/Q105554370 - 12-9.3 - Cut-off angular wavenumber in the Debye model of the vibrational spectrum of a solid. + Quotient of dynamic viscosity and mass density of a fluid. + KinematicViscosity + KinematicViscosity + https://qudt.org/vocab/quantitykind/KinematicViscosity + https://www.wikidata.org/wiki/Q15106259 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-35 + 4-25 + Quotient of dynamic viscosity and mass density of a fluid. + https://doi.org/10.1351/goldbook.K03395 - - + + + + + + + + + + + - The energy possessed by a body by virtue of its position or orientation in a potential field. - PotentialEnergy - PotentialEnergy - http://qudt.org/vocab/quantitykind/PotentialEnergy - 4-28.1 - The energy possessed by a body by virtue of its position or orientation in a potential field. - https://doi.org/10.1351/goldbook.P04778 + Product of the mean linear range R and the mass density ρ of the material. + MeanMassRange + MeanMassRange + https://qudt.org/vocab/quantitykind/MeanMassRange + https://www.wikidata.org/wiki/Q98681670 + 10-57 + Product of the mean linear range R and the mass density ρ of the material. + https://doi.org/10.1351/goldbook.M03783 - - - - - ElectrolyticConductivity - ElectrolyticConductivity - https://qudt.org/vocab/quantitykind/ElectrolyticConductivity - https://www.wikidata.org/wiki/Q907564 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-01-03 - 9-44 + + + + Probe is the physical tool (i.e., a disturbance, primary solicitation, or a gadget), controlled over time, that generates measurable fields that interact with the sample to acquire information on the specimen’s behaviour and properties. + + Probe + Probe + Probe is the physical tool (i.e., a disturbance, primary solicitation, or a gadget), controlled over time, that generates measurable fields that interact with the sample to acquire information on the specimen’s behaviour and properties. + In dynamic light scattering, temporal fluctuations of backscattered light due to Brownian motion and flow of nanoparticles are the probe, resolved as function of pathlength in the sample. From fluctuation analysis (intensity correlations) and the wavelength of light in the medium, the (distribution of) diffusion coefficient(s) can be measured during flow. The Stokes-Einstein relation yields the particle size characteristics. + In electron microscopy (SEM or TEM), the probe is a beam of electrons with known energy that is focused (and scanned) on the sample’s surface with a well-defined beam-size and scanning algorithm. + In mechanical testing, the probe is a the tip plus a force actuator, which is designed to apply a force over-time on a sample. Many variants can be defined depending on way the force is applied (tensile/compressive uniaxial tests, bending test, indentation test) and its variation with time (static tests, dynamic/cyclic tests, impact tests, etc…) + In spectroscopic methods, the probe is a beam of light with pre-defined energy (for example in the case of laser beam for Raman measurements) or pre-defined polarization (for example in the case of light beam for Spectroscopic Ellipsometry methods), that will be properly focused on the sample’s surface with a welldefined geometry (specific angle of incidence). + In x-ray diffraction, the probe is a beam of x-rays with known energy that is properly focused on the sample’s surface with a well-defined geometry - - - - + + + + + + + + + + + - Quotient of the thermal diffusion ratio and the product of the local amount-of-substance fractions. - ThermalDiffusionFactor - ThermalDiffusionFactor - https://qudt.org/vocab/quantitykind/ThermalDiffusionFactor - https://www.wikidata.org/wiki/Q96249629 - 9-40.2 - Quotient of the thermal diffusion ratio and the product of the local amount-of-substance fractions. + Mass per length. + LinearMassDensity + LinearDensity + LineicMass + LinearMassDensity + https://qudt.org/vocab/quantitykind/LinearDensity + https://www.wikidata.org/wiki/Q56298294 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-11 + 4-6 + Mass per length. - - - + + - ThermalDiffusionRatio - ThermalDiffusionRatio - https://qudt.org/vocab/quantitykind/ThermalDiffusionRatio - https://www.wikidata.org/wiki/Q96249433 - 9-40.1 + Imaginary part of the complex power. + ReactivePower + ReactivePower + https://qudt.org/vocab/quantitykind/ReactivePower + https://www.wikidata.org/wiki/Q2144613 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-11-44 + 6-60 + Imaginary part of the complex power. - - + + - In some cases, (like tribological characterisations) the “sample” can also be the “probe”. When analysing a system of samples that interact each other, finding a clear definition can become a complex problem. - The volume of material, and the surrounding environment, that interacts with the probe and generate a detectable (measurable) signal (information). + The environmental scanning electron microscope (ESEM) is a scanning electron microscope (SEM) that allows for the option of collecting electron micrographs of specimens that are wet, uncoated, or both by allowing for a gaseous environment in the specimen chamber. - InteractionVolume - InteractionVolume - The volume of material, and the surrounding environment, that interacts with the probe and generate a detectable (measurable) signal (information). - In Scanning Electron Microscopy (SEM), the interaction volume is the volume of material that interacts directly with the incident electron beam, is usually much smaller than the entire specimen’s volume, and can be computed by using proper models. The interaction between the scanning probe and the sample generates a series of detectable signals (back scattered electrons, secondary electrons, x-rays, specimen current, etc.) which contain information on sample morphology, microstructure, composition, etc. - In x-ray diffraction, the interaction volume is the volume of material that interacts directly with the x-ray beam and is usually smaller than the volume of the entire specimen. Depending on sample’s structure and microstructure, the interaction between the sample and the x-ray incident beam generates a secondary (reflected) beam that is measured by a detector and contains information on certain sample’s properties (e.g., crystallographic structure, phase composition, grain size, residual stress, …). - In some cases, (like tribological characterisations) the “sample” can also be the “probe”. When analysing a system of samples that interact each other, finding a clear definition can become a complex problem. - It is important to note that, in some cases, the volume of interaction could be different from the volume of detectable signal emission. Example: in Scanning Electron Microscopy (SEM), the volume of interaction between the electron probe and the material is different from the volumes that generate the captured signal. + EnvironmentalScanningElectronMicroscopy + EnvironmentalScanningElectronMicroscopy + The environmental scanning electron microscope (ESEM) is a scanning electron microscope (SEM) that allows for the option of collecting electron micrographs of specimens that are wet, uncoated, or both by allowing for a gaseous environment in the specimen chamber. - + + + + A chain of linked physics based model simulations solved iteratively, where equations are segregated. + IterativeCoupledModelsSimulation + IterativeCoupledModelsSimulation + A chain of linked physics based model simulations solved iteratively, where equations are segregated. + + + + + + + + + + + + + + + + An interpreter who establish the connection between an index sign and an object according to a causal contiguity. + Deducer + Deducer + An interpreter who establish the connection between an index sign and an object according to a causal contiguity. + Someone who deduces an emotional status of a persona according to facial expression. + Someone who deduces the occurring of a physical phenomenon through other phenomena. + + + + - - Vector quantity expressing the internal angular momentum of a particle or a particle system. - Spin - Spin - https://qudt.org/vocab/quantitykind/Spin - https://www.wikidata.org/wiki/Q133673 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-05-09 - 10-10 - Vector quantity expressing the internal angular momentum of a particle or a particle system. + Resonance in a nuclear reaction, determined by the kinetic energy of an incident particle in the reference frame of the target particle. + ResonanceEnergy + ResonanceEnergy + https://qudt.org/vocab/quantitykind/ResonanceEnergy + https://www.wikidata.org/wiki/Q98165187 + 10-37.2 + Resonance in a nuclear reaction, determined by the kinetic energy of an incident particle in the reference frame of the target particle. - - + + + + + + + + + + + - ElectricCurrentPhasor - ElectricCurrentPhasor - https://qudt.org/vocab/quantitykind/ElectricCurrentPhasor - https://www.wikidata.org/wiki/Q78514596 - 6-49 + Quotient of the mean rate of production of particles in a volume, and that volume. + ParticleSourceDensity + ParticleSourceDensity + https://qudt.org/vocab/quantitykind/ParticleSourceDensity + https://www.wikidata.org/wiki/Q98915762 + 10-66 + Quotient of the mean rate of production of particles in a volume, and that volume. - - - + + + - Fraction of atoms in an Ising ferromagnet having magnetic moments in one direction, minus the fraction having magnetic moments in the opposite direction. - LongRangeOrderParameter - LongRangeOrderParameter - https://qudt.org/vocab/quantitykind/Long-RangeOrderParameter - https://www.wikidata.org/wiki/Q105496124 - 12-5.2 - Fraction of atoms in an Ising ferromagnet having magnetic moments in one direction, minus the fraction having magnetic moments in the opposite direction. + At a fixed point in a medium, the direction of propagation of heat is opposite to the temperature gradient. At a point on the surface separating two media with different temperatures, the direction of propagation of heat is normal to the surface, from higher to lower temperatures. + Vector quantity with magnitude equal to the heat flow rate dΦ through a surface element divided by the area dA of the element, and direction eφ in the direction of propagation of heat. + DensityOfHeatFlowRate + AreicHeatFlowRate + DensityOfHeatFlowRate + https://www.wikidata.org/wiki/Q1478382 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-37 + 5-8 + Vector quantity with magnitude equal to the heat flow rate dΦ through a surface element divided by the area dA of the element, and direction eφ in the direction of propagation of heat. + https://doi.org/10.1351/goldbook.H02755 - - + + + + - - - - - - + + - - An interpreter who establish the connection between an index sign and an object according to a causal contiguity. - Deducer - Deducer - An interpreter who establish the connection between an index sign and an object according to a causal contiguity. - Someone who deduces an emotional status of a persona according to facial expression. - Someone who deduces the occurring of a physical phenomenon through other phenomena. + + Power transferred per unit area. + Intensity + Intensity + Power transferred per unit area. + https://en.wikipedia.org/wiki/Intensity_(physics) - + - T-2 L+2 M+1 I0 Θ-1 N0 J0 + T+4 L-4 M-2 I0 Θ0 N0 J0 - - EntropyUnit - EntropyUnit + + ReciprocalSquareEnergyUnit + ReciprocalSquareEnergyUnit - - + + - Physical constant in Newton's law of gravitation and in Einstein's general theory of relativity. - NewtonianConstantOfGravity - NewtonianConstantOfGravity - http://qudt.org/vocab/constant/NewtonianConstantOfGravitation - https://doi.org/10.1351/goldbook.G02695 + Change of the relative positions of parts of a body, excluding a displacement of the body as a whole. + Strain + Strain + http://qudt.org/vocab/quantitykind/Strain + 4-17.1 + Change of the relative positions of parts of a body, excluding a displacement of the body as a whole. - - - - - T-1 L-3 M0 I0 Θ0 N0 J0 - - - + + + - FrequencyPerVolumeUnit - FrequencyPerVolumeUnit + In nuclear physics, quotient of the reduced Planck constant and the mean duration of life of an unstable particle or an excited state. + LevelWidth + LevelWidth + https://qudt.org/vocab/quantitykind/LevelWidth + https://www.wikidata.org/wiki/Q98082340 + 10-26 + In nuclear physics, quotient of the reduced Planck constant and the mean duration of life of an unstable particle or an excited state. + https://doi.org/10.1351/goldbook.L03507 - - + + + + + Quotient of relative mass excess and the nucleon number. + PackingFraction + PackingFraction + https://qudt.org/vocab/quantitykind/PackingFraction + https://www.wikidata.org/wiki/Q98058276 + 10-23.1 + Quotient of relative mass excess and the nucleon number. + + + + + + + RedBottomQuark + RedBottomQuark + + + + + + A Material occurring in nature, without the need of human intervention. + NaturalMaterial + NaturalMaterial + A Material occurring in nature, without the need of human intervention. + + + + + + + + - - T0 L+3 M0 I0 Θ0 N0 J0 + + - - - - VolumeUnit - VolumeUnit + + + Logarithmic measure of the number of available states of a system. + May also be referred to as a measure of order of a system. + Entropy + Entropy + http://qudt.org/vocab/quantitykind/Entropy + 5-18 + https://doi.org/10.1351/goldbook.E02149 - - + + - + - + - + @@ -17330,197 +16479,184 @@ pH = −10 log(a_H+). - - UpQuarkType - UpQuarkType - - - - - - - for metals, the resistivity extrapolated to zero thermodynamic temperature - ResidualResistivity - ResidualResistivity - https://qudt.org/vocab/quantitykind/ResidualResistivity - https://www.wikidata.org/wiki/Q25098876 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=815-13-61 - 12-17 - for metals, the resistivity extrapolated to zero thermodynamic temperature + + A material in which distributed particles of one phase are dispersed in a different continuous phase. + Dispersion + Dispersion + A material in which distributed particles of one phase are dispersed in a different continuous phase. - - - - - - + + - - + + - - Electric field strength divided by the current density. - ElectricResistivity - Resistivity - ElectricResistivity - http://qudt.org/vocab/quantitykind/Resistivity - https://www.wikidata.org/wiki/Q108193 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-12-04 - 6-44 - https://doi.org/10.1351/goldbook.R05316 + + A mixture in which more than one phases of matter cohexists. + Phase heterogenous mixture may share the same state of matter. + +For example, immiscibile liquid phases (e.g. oil and water) constitute a mixture whose phases are clearly separated but share the same state of matter. + PhaseHeterogeneousMixture + PhaseHeterogeneousMixture + A mixture in which more than one phases of matter cohexists. + Phase heterogenous mixture may share the same state of matter. + +For example, immiscibile liquid phases (e.g. oil and water) constitute a mixture whose phases are clearly separated but share the same state of matter. - - - - Smoke is a solid aerosol made of particles emitted when a material undergoes combustion or pyrolysis. - Smoke - Smoke - Smoke is a solid aerosol made of particles emitted when a material undergoes combustion or pyrolysis. + + + + Direct coulometry at controlled potential in which the electric charge passed after the application of a potential step perturbation is measured as a function of time (Q-t curve). Chronocoulometry provides the same information that is provided by chronoamperometry, since it is based on the integration of the I-t curve. Nevertheless, chronocoulometry offers important experimental advantages, such as (i) the measured signal usually increases with time and hence the later parts of the transient can be detected more accurately, (ii) a better signal-to-noise ratio can be achieved, and (iii) other contributions to overall charge passed as a function of time can be discriminated from those due to the diffusion of electroactive substances. + Chronocoulometry + Chronocoulometry + Direct coulometry at controlled potential in which the electric charge passed after the application of a potential step perturbation is measured as a function of time (Q-t curve). Chronocoulometry provides the same information that is provided by chronoamperometry, since it is based on the integration of the I-t curve. Nevertheless, chronocoulometry offers important experimental advantages, such as (i) the measured signal usually increases with time and hence the later parts of the transient can be detected more accurately, (ii) a better signal-to-noise ratio can be achieved, and (iii) other contributions to overall charge passed as a function of time can be discriminated from those due to the diffusion of electroactive substances. + https://doi.org/10.1515/pac-2018-0109 - - - - Data that can be decoded under a quantitative schema and also associated with a graphical number symbols. - NumericalData - NumericalData - Data that can be decoded under a quantitative schema and also associated with a graphical number symbols. + + + + Electrochemical measurement principle in which the electric charge required to carry out a known electrochemical reaction is measured. By Faraday’s laws of electrolysis, the amount of substance is proportional to the charge. Coulometry used to measure the amount of substance is a primary reference measurement procedure [VIM 2.8] not requiring calibration with a standard for a quantity of the same kind (i.e. amount of substance). The coulometric experiment can be carried out at controlled (constant) potential (see direct coulometry at controlled potential) or controlled (constant) current (see direct coulometry at controlled current). + Coulometry + Coulometry + https://www.wikidata.org/wiki/Q1136979 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-04-13 + Electrochemical measurement principle in which the electric charge required to carry out a known electrochemical reaction is measured. By Faraday’s laws of electrolysis, the amount of substance is proportional to the charge. Coulometry used to measure the amount of substance is a primary reference measurement procedure [VIM 2.8] not requiring calibration with a standard for a quantity of the same kind (i.e. amount of substance). The coulometric experiment can be carried out at controlled (constant) potential (see direct coulometry at controlled potential) or controlled (constant) current (see direct coulometry at controlled current). + https://en.wikipedia.org/wiki/Coulometry + https://doi.org/10.1515/pac-2018-0109 - - - - Widening is tensile forming to increase the circumference of a hollow body. A distinction is made between: Widening, bulging. - Widening - Weiten - Widening + + + + + T+1 L0 M0 I0 Θ0 N0 J0 + + + + + TimeUnit + TimeUnit - - - - Shot peening is shot peening for shaping or straightening workpieces by introducing residual compressive stresses (from: DIN 8200/10.82). - FormingBlasting - Umformstrahlen - FormingBlasting + + + + A test to determine the resistance a material exhibits to permanent deformation by penetration of another harder material. + + HardnessTesting + HardnessTesting + A test to determine the resistance a material exhibits to permanent deformation by penetration of another harder material. - - - - - GreenUpAntiQuark - GreenUpAntiQuark + + + + + One minus the square of the coupling factor + LeakageFactor + LeakageFactor + https://www.wikidata.org/wiki/Q78102042 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-42 + 6-42.2 + One minus the square of the coupling factor - - - - - - - - - - - - - - - - - - - - - UpAntiQuark - UpAntiQuark + + + + Vector quantity equal to the product of the magnetization M and the magnetic constant μ0. + MagneticPolarisation + MagneticPolarisation + https://qudt.org/vocab/quantitykind/MagneticPolarization + https://www.wikidata.org/wiki/Q856711 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-54 + 6-29 + Vector quantity equal to the product of the magnetization M and the magnetic constant μ0. - - - - - - - - - - - - - - - - - - - - - StrangeQuark - StrangeQuark - https://en.wikipedia.org/wiki/Strange_quark + + + + Amperometry can be distinguished from voltammetry by the parameter being controlled (electrode potential E) and the parameter being measured (electrode current I which is usually a function of time – see chronoamperometry). In a non-stirred solution, a diffusion-limited current is usually measured, which is propor-tional to the concentration of an electroactive analyte. The current is usually faradaic and the applied potential is usually constant. The integral of current with time is the electric charge, which may be related to the amount of substance reacted by Faraday’s laws of electrolysis. + The amperometric method provides the ability to distinguish selectively between a number of electroactive species in solution by judicious selection of the applied potential and/or choice of electrode material. + Amperometry + Amperometry + The amperometric method provides the ability to distinguish selectively between a number of electroactive species in solution by judicious selection of the applied potential and/or choice of electrode material. + https://doi.org/10.1515/pac-2018-0109 - - - - - - - - - - - - - - - - - - - - DownQuarkType - DownQuarkType + + + + A wear test measures the changes in conditions caused by friction, and the result is obtained from deformation, scratches, and indentations on the interacting surfaces. Wear is defined as the progressive removal of the material from a solid surface and manifested by a change in the geometry of the surface. + WearTesting + WearTesting + A wear test measures the changes in conditions caused by friction, and the result is obtained from deformation, scratches, and indentations on the interacting surfaces. Wear is defined as the progressive removal of the material from a solid surface and manifested by a change in the geometry of the surface. - - - + + + + + + + + + + - CanonicalPartitionFunction - CanonicalPartitionFunction - https://qudt.org/vocab/quantitykind/CanonicalPartitionFunction - https://www.wikidata.org/wiki/Q96142389 - 9-35.2 + A vector quantity equal to the product of the current, the loop area, and the unit vector normal to the loop plane, the direction of which corresponds to the loop orientation + MagneticMoment + MagneticAreaMoment + MagneticMoment + https://qudt.org/vocab/quantitykind/MagneticMoment + https://www.wikidata.org/wiki/Q242657 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-49 + 6-23 + A vector quantity equal to the product of the current, the loop area, and the unit vector normal to the loop plane, the direction of which corresponds to the loop orientation + https://doi.org/10.1351/goldbook.M03688 - - - - - The Rydberg constant represents the limiting value of the highest wavenumber (the inverse wavelength) of any photon that can be emitted from the hydrogen atom, or, alternatively, the wavenumber of the lowest-energy photon capable of ionizing the hydrogen atom from its ground state. - RybergConstant - RybergConstant - http://qudt.org/vocab/constant/RydbergConstant - https://doi.org/10.1351/goldbook.R05430 + + + + Secondary-ion mass spectrometry (SIMS) is a technique used to analyze the composition of solid surfaces and thin films by sputtering the surface of the specimen with a focused primary ion beam and collecting and analyzing ejected secondary ions. + + SecondaryIonMassSpectrometry + SIMS + SecondaryIonMassSpectrometry + Secondary-ion mass spectrometry (SIMS) is a technique used to analyze the composition of solid surfaces and thin films by sputtering the surface of the specimen with a focused primary ion beam and collecting and analyzing ejected secondary ions. - - + + - Complex representation of an oscillating voltage. - VoltagePhasor - VoltagePhasor - https://qudt.org/vocab/quantitykind/VoltagePhasor - https://www.wikidata.org/wiki/Q78514605 - 6-50 - Complex representation of an oscillating voltage. + Rate of change of the phase angle. + AngularFrequency + AngularFrequency + https://qudt.org/vocab/quantitykind/AngularFrequency + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-07-03 + https://dbpedia.org/page/Angular_frequency + 3-18 + Rate of change of the phase angle. + https://en.wikipedia.org/wiki/Angular_frequency + https://doi.org/10.1351/goldbook.A00352 + + + + + + + An application aimed to functionally reproduce an object. + SimulationApplication + SimulationApplication + An application aimed to functionally reproduce an object. + An application that predicts the pressure drop of a fluid in a pipe segment is aimed to functionally reproduce the outcome of a measurement of pressure before and after the segment. @@ -17537,344 +16673,451 @@ pH = −10 log(a_H+). Ratio of the mass of water to the mass of dry matter in a given volume of matter. - - + + + + + T+2 L+1 M-2 I0 Θ0 N+1 J0 + + + - Atomic quantum number related to the z component lz, jz or sz, of the orbital, total, or spin angular momentum. - MagneticQuantumNumber - MagneticQuantumNumber - https://qudt.org/vocab/quantitykind/MagneticQuantumNumber - https://www.wikidata.org/wiki/Q2009727 - 10-13.4 - Atomic quantum number related to the z component lz, jz or sz, of the orbital, total, or spin angular momentum. + AmountPerMassPressureUnit + AmountPerMassPressureUnit - - - - - - - - - - - - - - - - - - - - - StrangeAntiQuark - StrangeAntiQuark + + + + + + + + + + + + + Volume per amount of substance. + MolarVolume + MolarVolume + https://qudt.org/vocab/quantitykind/MolarVolume + https://www.wikidata.org/wiki/Q487112 + 9-5 + Volume per amount of substance. + + + + + + + The quantum of action. It defines the kg base unit in the SI system. + PlanckConstant + PlanckConstant + http://qudt.org/vocab/constant/PlanckConstant + The quantum of action. It defines the kg base unit in the SI system. + https://doi.org/10.1351/goldbook.P04685 - - - - - SampleInspectionInstrument - SampleInspectionInstrument + + + + + T0 L+2 M0 I+1 Θ0 N0 J0 + + + + + MagneticDipoleMomentUnit + MagneticDipoleMomentUnit - - - - Direct coulometry at controlled potential is usually carried out in convective mass trans- fer mode using a large surface working electrode. Reference and auxiliary electrodes are placed in separate compartments. The total electric charge is obtained by integration of the I–t curve or can be measured directly using a coulometer. - In principle, the end point at which I = 0, i.e. when the concentration of species under study becomes zero, can be reached only at infinite time. However, in practice, the electrolysis is stopped when the current has decayed to a few percent of the initial value and the charge passed at infinite time is calculated from a plot of charge Q(t) against time t. For a simple system under diffusion control Qt= Q∞[1 − exp(−DAt/Vδ)], where Q∞ = limt→∞Q(t) is the total charge passed at infinite time, D is the diffusion coefficient of the electroactive species, A the electrode area, δ the diffusion layer thickness, and V the volume of the solution. - coulometry at a preselected constant potential of the working electrode - - DirectCoulometryAtControlledPotential - DirectCoulometryAtControlledPotential - coulometry at a preselected constant potential of the working electrode - https://doi.org/10.1515/pac-2018-0109 + + + + + T+2 L0 M-1 I+1 Θ+1 N0 J0 + + + + + TemperaturePerMagneticFluxDensityUnit + TemperaturePerMagneticFluxDensityUnit - - - - Amperometry can be distinguished from voltammetry by the parameter being controlled (electrode potential E) and the parameter being measured (electrode current I which is usually a function of time – see chronoamperometry). - In a non-stirred solution, a diffusion-limited current is usually measured, which is propor-tional to the concentration of an electroactive analyte. - The amperometric method provides the ability to distinguish selectively between a number of electroactive species in solution by judicious selection of the applied potential and/or choice of electrode material. - The current is usually faradaic and the applied potential is usually constant. - The integral of current with time is the electric charge, which may be related to the amount of substance reacted by Faraday’s laws of electrolysis. - - Amperometry - Amperometry - The amperometric method provides the ability to distinguish selectively between a number of electroactive species in solution by judicious selection of the applied potential and/or choice of electrode material. - https://doi.org/10.1515/pac-2018-0109 + + + + + number of nucleons in an atomic nucleus + NucleonNumber + MassNumber + NucleonNumber + https://qudt.org/vocab/quantitykind/NucleonNumber + https://www.wikidata.org/wiki/Q101395 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-05-32 + https://dbpedia.org/page/Mass_number + 10-1.3 + number of nucleons in an atomic nucleus + https://en.wikipedia.org/wiki/Mass_number + https://doi.org/10.1351/goldbook.M03726 - - + - + - + - For an atom or nucleus, this energy is quantized and can be written as: + The DBpedia definition (http://dbpedia.org/page/Avogadro_constant) is outdated as May 20, 2019. It is now an exact quantity. + The number of constituent particles, usually atoms or molecules, that are contained in the amount of substance given by one mole. - W = g μ M B +It defines the base unit mole in the SI system. + AvogadroConstant + AvogadroConstant + http://qudt.org/vocab/constant/AvogadroConstant + The number of constituent particles, usually atoms or molecules, that are contained in the amount of substance given by one mole. -where g is the appropriate g factor, μ is mostly the Bohr magneton or nuclear magneton, M is magnetic quantum number, and B is magnitude of the magnetic flux density. +It defines the base unit mole in the SI system. + https://doi.org/10.1351/goldbook.A00543 + --- ISO 80000 - Vector quantity μ causing a change to its energy ΔW in an external magnetic field of field flux density B: + + + + + T0 L-1 M0 I+1 Θ0 N0 J0 + + + + + MagneticFieldStrengthUnit + MagneticFieldStrengthUnit + - ΔW = −μ · B - MagneticDipoleMoment - MagneticDipoleMoment - http://qudt.org/vocab/quantitykind/MagneticDipoleMoment - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-55 - 10-9.1 - 6-30 - Vector quantity μ causing a change to its energy ΔW in an external magnetic field of field flux density B: + + + + LaserCutting + LaserCutting + - ΔW = −μ · B - http://goldbook.iupac.org/terms/view/M03688 + + + + Thermal ablation is the separation of material particles in solid, liquid or gaseous state by heat processes as well as the removal of these material particles by mechanical or electromagnetic forces (from: DIN + ThermalCutting + Thermisches Abtragen + ThermalCutting + Thermal ablation is the separation of material particles in solid, liquid or gaseous state by heat processes as well as the removal of these material particles by mechanical or electromagnetic forces (from: DIN - + - T+2 L0 M-1 I0 Θ0 N0 J0 + T-2 L+4 M0 I0 Θ0 N0 J0 - SquareTimePerMassUnit - SquareTimePerMassUnit + MassStoppingPowerUnit + MassStoppingPowerUnit - - - - - Quotient of the total mean charge of all positive ions produced by an ionizing charged particle along its entire path and along the paths of any secondary charged particles, and the elementary charge. - TotalIonization - TotalIonization - https://qudt.org/vocab/quantitykind/TotalIonization - https://www.wikidata.org/wiki/Q98690787 - 10-59 - Quotient of the total mean charge of all positive ions produced by an ionizing charged particle along its entire path and along the paths of any secondary charged particles, and the elementary charge. + + + + + A generic step in a workflow, that is not the begin or the end. + InternalStep + InternalStep + A generic step in a workflow, that is not the begin or the end. - - - - - Service - IntangibleProduct - Service - https://www.iso.org/obp/ui/#iso:std:iso:9000:ed-4:v1:en:term:3.7.7 + + + + + + + + + + + + + + A step is part of a specific granularity level for the workflow description, as composition of tasks. + A task that is a well formed tile of a workflow, according to a reductionistic description. + Step + Step + A task that is a well formed tile of a workflow, according to a reductionistic description. + A step is part of a specific granularity level for the workflow description, as composition of tasks. - - - - A subclass of measurement unit focusing on the physical dimensionality that is carried by the unit. - The current version of EMMO does not provide explicit classes for physical dimensions. Rather it embraces the fact that the physical dimensionality of a physical quantity is carried by its measurement unit. - -The role of dimensional unit and its subclasses is to express the physical dimensionality that is carried by the unit. - -Since the dimensionality of a physical quantity can be written as the product of powers of the physical dimensions of the base quantities in the selected system of quantities, the physical dimensionality of a measurement unit is uniquely determined by the exponents. For a dimensional unit, at least one of these exponents must be non-zero (making it disjoint from dimensionless units). - DimensionalUnit - DimensionalUnit - A subclass of measurement unit focusing on the physical dimensionality that is carried by the unit. - The current version of EMMO does not provide explicit classes for physical dimensions. Rather it embraces the fact that the physical dimensionality of a physical quantity is carried by its measurement unit. + + + + A tile that has next and is next of other tiles within the same tessellation. + ThroughTile + ThroughTile + A tile that has next and is next of other tiles within the same tessellation. + -The role of dimensional unit and its subclasses is to express the physical dimensionality that is carried by the unit. + + + + process of joining materials to make parts from 3D model data, usually layer upon layer, as opposed to subtractive manufacturing (3.1.29) and formative manufacturing methodologies, + AdditiveManufacturing + GenerativeManufacturing + AdditiveManufacturing + process of joining materials to make parts from 3D model data, usually layer upon layer, as opposed to subtractive manufacturing (3.1.29) and formative manufacturing methodologies, + -Since the dimensionality of a physical quantity can be written as the product of powers of the physical dimensions of the base quantities in the selected system of quantities, the physical dimensionality of a measurement unit is uniquely determined by the exponents. For a dimensional unit, at least one of these exponents must be non-zero (making it disjoint from dimensionless units). + + + + + In an infinite homogenous medium, one-sixth of the mean square of the distance between the neutron source and the point where a neutron reaches a given energy. + SlowingDownArea + SlowingDownArea + https://qudt.org/vocab/quantitykind/Slowing-DownArea + https://www.wikidata.org/wiki/Q98950918 + 10-72.1 + In an infinite homogenous medium, one-sixth of the mean square of the distance between the neutron source and the point where a neutron reaches a given energy. - - - + + + + + + + + + + + - Angle between the scattered ray and the lattice plane. - BraggAngle - BraggAngle - https://qudt.org/vocab/quantitykind/BraggAngle - https://www.wikidata.org/wiki/Q105488118 - 12-4 - Angle between the scattered ray and the lattice plane. + Measure of the tendency of a substance to leave a phase. + Fugacity + Fugacity + https://qudt.org/vocab/quantitykind/Fugacity + https://www.wikidata.org/wiki/Q898412 + 9-20 + Measure of the tendency of a substance to leave a phase. + https://doi.org/10.1351/goldbook.F02543 + + + + + + "Quantity in a conventionally chosen subset of a given system of quantities, where no quantity in the subset can be expressed in terms of the other quantities within that subset" +ISO 80000-1 + BaseQuantity + BaseQuantity + "Quantity in a conventionally chosen subset of a given system of quantities, where no quantity in the subset can be expressed in terms of the other quantities within that subset" +ISO 80000-1 + base quantity - + + + + A physics-based model based on a physics equation describing the behaviour of continuum volume. + ContinuumModel + ContinuumModel + A physics-based model based on a physics equation describing the behaviour of continuum volume. + + + - T-1 L+3 M0 I-1 Θ0 N0 J0 + T-2 L+3 M+1 I0 Θ0 N0 J0 - ReciprocalElectricChargeDensityUnit - ReciprocalElectricChargeDensityUnit + ForceAreaUnit + ForceAreaUnit - - - - - - - - - + + - An equation with variables can always be represented as: + A standalone simulation, where a single physics equation is solved. + StandaloneModelSimulation + StandaloneModelSimulation + A standalone simulation, where a single physics equation is solved. + -f(v0, v1, ..., vn) = g(v0, v1, ..., vn) + + + + A simulation that relies on physics based models, according to the Review of Materials Modelling and CWA 17284:2018. + CEN Workshop Agreement – CWA 17284 “Materials modelling – terminology, classification and metadata” + PhysicsBasedSimulation + PhysicsBasedSimulation + A simulation that relies on physics based models, according to the Review of Materials Modelling and CWA 17284:2018. + -where f is the left hand and g the right hand side expressions and v0, v1, ..., vn are the variables. - The class of 'mathematical'-s that stand for a statement of equality between two mathematical expressions. - Equation - Equation - The class of 'mathematical'-s that stand for a statement of equality between two mathematical expressions. - 2+3 = 5 -x^2 +3x = 5x -dv/dt = a -sin(x) = y + + + + Calibration data are used to provide correction of measured data or perform uncertainty calculations. They are generally the result of a measuerement on a reference specimen. + CalibrationData + CalibrationData + Calibration data are used to provide correction of measured data or perform uncertainty calculations. They are generally the result of a measuerement on a reference specimen. - - - - - Unit for dimensionless quantities that have the nature of count. - CountingUnit - CountingUnit - http://qudt.org/vocab/unit/NUM - 1 - Unit for dimensionless quantities that have the nature of count. - Unit of atomic number -Unit of number of cellular -Unit of degeneracy in quantum mechanics + + + + Represents every type of data that is produced during a characterisation process + CharacterisationData + CharacterisationData + Represents every type of data that is produced during a characterisation process - + - - - T-3 L0 M+1 I0 Θ-1 N0 J0 - + + + + + + - - - ThermalTransmittanceUnit - ThermalTransmittanceUnit - - - - - - - ChargeDistribution - ChargeDistribution + + + Coupled + Coupled - - + + + - - + - A measure of the wavelength-weighted power emitted by a light source in a particular direction per unit solid angle. It is based on the luminosity function, which is a standardized model of the sensitivity of the human eye. - LuminousIntensity - LuminousIntensity - http://qudt.org/vocab/quantitykind/LuminousIntensity - 7-14 - A measure of the wavelength-weighted power emitted by a light source in a particular direction per unit solid angle. It is based on the luminosity function, which is a standardized model of the sensitivity of the human eye. + Quotient of the activity A of a sample and the mass m of that sample. + SpecificActivity + MassicActivity + SpecificActivity + https://qudt.org/vocab/quantitykind/SpecificActivity + https://www.wikidata.org/wiki/Q2823748 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-08 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-04-43 + 10-28 + Quotient of the activity A of a sample and the mass m of that sample. + https://doi.org/10.1351/goldbook.S05790 - - - - Nanomaterials are Materials possessing, at minimum, one external dimension measuring 1-100nm - NanoMaterial - NanoMaterial - Nanomaterials are Materials possessing, at minimum, one external dimension measuring 1-100nm + + + + + Dimensionless quantity in electromagnetism. + QualityFactor + QualityFactor + https://qudt.org/vocab/quantitykind/QualityFactor + https://www.wikidata.org/wiki/Q79467569 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=151-15-45 + 6-53 + Dimensionless quantity in electromagnetism. - - - - SizeDefinedMaterial - SizeDefinedMaterial + + + + Describes how raw data are corrected and/or modified through calibrations. + DataProcessingThroughCalibration + DataProcessingThroughCalibration + Describes how raw data are corrected and/or modified through calibrations. - - - - - GreenTopAntiQuark - GreenTopAntiQuark + + + + Folding + Folding - - - - - - A scientific theory is a description, objective and observed, produced with scientific methodology. - ScientificTheory - ScientificTheory - A scientific theory is a description, objective and observed, produced with scientific methodology. + + + + ThermalSprayingForming + ThermalSprayingForming - - - - - For an ideal gas, isentropic exponent is equal to ratio of the specific heat capacities. - IsentropicExponent - IsentropicExponent - https://qudt.org/vocab/quantitykind/IsentropicExponent - https://www.wikidata.org/wiki/Q75775739 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-52 - 5-17.2 + + + + FormingFromPowder + FormingFromPowder - - - - Process of cutting a workpiece into smaller parts that are either doughter parts, samples (e.g. for testing) or scrap. - Cutting with circular or straight cutting motion, using a multi-toothed tool of small cutting width, the cutting motion being performed by the tool - Sawing - Sägen - Sawing - Process of cutting a workpiece into smaller parts that are either doughter parts, samples (e.g. for testing) or scrap. + + + + + + + + + + + + + + + + + + + + + An elementary particle with spin 1/2 that interacts only via the weak interaction and gravity. + NeutrinoType + NeutrinoType + An elementary particle with spin 1/2 that interacts only via the weak interaction and gravity. + https://en.wikipedia.org/wiki/Neutrino - - - - A manufacturing in which material is removed from the workpiece in the form of chips. - Machining - RemovingChipsFromWorkpiece - Machining - A manufacturing in which material is removed from the workpiece in the form of chips. + + + + LeftHandedParticle + LeftHandedParticle - + + + + + The ratio of the binding energy of a nucleus to the atomic mass number. + BindingFraction + BindingFraction + https://qudt.org/vocab/quantitykind/BindingFraction + https://www.wikidata.org/wiki/Q98058362 + 10-23.2 + The ratio of the binding energy of a nucleus to the atomic mass number. + + + @@ -17886,127 +17129,237 @@ Unit of degeneracy in quantum mechanics - Charge number is a quantity of dimension one defined in ChargeNumber. - For all types of ions in a solution, half the sum of the products of their molality b_i and the square of their charge number z_i. - IonicStrength - IonicStrength - https://qudt.org/vocab/quantitykind/IonicStrength - https://www.wikidata.org/wiki/Q898396 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-01-24 - 9-42 - For all types of ions in a solution, half the sum of the products of their molality b_i and the square of their charge number z_i. - https://doi.org/10.1351/goldbook.I03180 + quotient of the amount of substance nB of solute B by the mass m of the solvent: bB = nB / m. + Molality + AmountPerMass + Molality + https://www.wikidata.org/wiki/Q172623 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-01-19 + 9-15 + quotient of the amount of substance nB of solute B by the mass m of the solvent: bB = nB / m. + https://doi.org/10.1351/goldbook.M03970 - - - - - - - - - - - + + + + Describes the level of automation of the test. + + LevelOfAutomation + LevelOfAutomation + Describes the level of automation of the test. + + + + + + A command must be interpretable by the computer system. + An instruction to a computer system to perform a given task. + Command + Command + From a bash shell would e.g. `ls` be a command. Another example of a shell command would be `/path/to/executable arg1 arg2`. + A command must be interpretable by the computer system. + Commands are typically performed from a shell or a shell script, but not limited to them. + + + + + + Radius of the osculating circle of a planar curve at a particular point of the curve. + RadiusOfCurvature + RadiusOfCurvature + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-01-30 + https://dbpedia.org/page/Radius_of_curvature + 3-1.12 + Radius of the osculating circle of a planar curve at a particular point of the curve. + https://en.wikipedia.org/wiki/Radius_of_curvature + + + + + + Distance from the centre of a circle to the circumference. + Radius + Radius + https://qudt.org/vocab/quantitykind/Radius + https://www.wikidata.org/wiki/Q173817 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-01-25 + https://dbpedia.org/page/Radius + 3-1.6 + Distance from the centre of a circle to the circumference. + https://en.wikipedia.org/wiki/Radius + + + + + + + SamplePreparationInstrument + SamplePreparationInstrument + + + + + + Free forming is pressure forming with tools that do not or only partially contain the shape of the workpiece and move against each other. + Non la metterei + Printing forms with tools that do not or only partially contain the shape of the workpiece and move against each other. The workpiece shape is created by free or fixed relative movement between the tool and the workpiece (kinematic shape generation). + FreeForming + FreeForming + + + + - An icon that not only resembles the object, but also can express some of the object's functions. - Replica - Replica - An icon that not only resembles the object, but also can express some of the object's functions. - A small scale replica of a plane tested in a wind gallery shares the same functionality in terms of aerodynamic behaviour of the bigger one. - Pinocchio is a functional icon of a boy since it imitates the external behaviour without having the internal biological structure of a human being (it is made of magic wood...). + A 'process' that is recognized by physical sciences and is categorized accordingly. + While every 'process' in the EMMO involves physical objects, this class is devoted to represent real world objects that express a phenomenon relevant for the ontologist + PhysicalPhenomenon + PhysicalPhenomenon + A 'process' that is recognized by physical sciences and is categorized accordingly. - - - - An icon that focus on WHERE/WHEN the object is, in the sense of spatial or temporal shape. - An icon that mimics the spatial or temporal shape of the object. - The subclass of icon inspired by Peirceian category a) the image, which depends on a simple quality (e.g. picture). - ResemblanceIcon - ResemblanceIcon - An icon that mimics the spatial or temporal shape of the object. - A geographical map that imitates the shape of the landscape and its properties at a specific historical time. - An icon that focus on WHERE/WHEN the object is, in the sense of spatial or temporal shape. + + + + + A foam of trapped gas in a solid. + SolidFoam + SolidFoam + A foam of trapped gas in a solid. + Aerogel - - - + + + + + + + + + + + + + + + + + + + 1 + + - In nuclear physics, the multiplication factor for an infinite medium. - InfiniteMultiplicationFactor - InfiniteMultiplicationFactor - https://qudt.org/vocab/quantitykind/InfiniteMultiplicationFactor - https://www.wikidata.org/wiki/Q99440487 - 10-78.2 - In nuclear physics, the multiplication factor for an infinite medium. + An integer number. + Integer + Integer + An integer number. - - - - - + + + - - + + + + + + - Scalar quantity equal to the flux of the electric flux density D through a given directed surface S. - ElectricFlux - ElectricFlux - https://qudt.org/vocab/quantitykind/ElectricFlux - https://www.wikidata.org/wiki/Q501267 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-41 - 6-17 - Scalar quantity equal to the flux of the electric flux density D through a given directed surface S. + Number of protons in an atomic nucleus. + AtomicNumber + AtomicNumber + http://qudt.org/vocab/quantitykind/AtomicNumber + Number of protons in an atomic nucleus. + 10-1.1 + https://doi.org/10.1351/goldbook.A00499 - - - + + + + Voltammetry in which small potential pulses (constant height 10 to 100 mV, constant width 10 to 100 ms) are superimposed onto a linearly varying potential or onto a staircase potential ramp. The current is sampled just before the onset of the pulse (e.g. 10 to 20 ms) and for the same sampling time just before the end of the pulse. The difference between the two sampled currents is plotted versus the potential applied before the pulse. Thus, a differential pulse voltammogram is peak-shaped. Differential pulse polarography is differential pulse voltammetry in which a dropping mercury electrode is used as the working electrode. A pulse is applied before the mechani- cally enforced end of the drop and the current is sampled twice: just before the onset of the pulse and just before its end. The pulse width is usually 10 to 20 % of the drop life. The drop dislodgement is synchronized with current sampling, which is carried out as in DPV. The ratio of faradaic current to charging current is enhanced and the negative influence of charging current is partially eliminated in the same way as in normal pulse voltammetry (NPV). Moreover, subtraction of the charging current sampled before the application of the pulse further decreases its negative influence. Due to the more enhanced signal (faradaic current) to noise (charging current) ratio, the limit of detection is lower than with NPV. The sensitivity of DPV depends on the reversibility of the electrode reaction of the analyte. + DifferentialPulseVoltammetry + DPV + DifferentialPulseVoltammetry + https://www.wikidata.org/wiki/Q5275361 + Voltammetry in which small potential pulses (constant height 10 to 100 mV, constant width 10 to 100 ms) are superimposed onto a linearly varying potential or onto a staircase potential ramp. The current is sampled just before the onset of the pulse (e.g. 10 to 20 ms) and for the same sampling time just before the end of the pulse. The difference between the two sampled currents is plotted versus the potential applied before the pulse. Thus, a differential pulse voltammogram is peak-shaped. Differential pulse polarography is differential pulse voltammetry in which a dropping mercury electrode is used as the working electrode. A pulse is applied before the mechani- cally enforced end of the drop and the current is sampled twice: just before the onset of the pulse and just before its end. The pulse width is usually 10 to 20 % of the drop life. The drop dislodgement is synchronized with current sampling, which is carried out as in DPV. The ratio of faradaic current to charging current is enhanced and the negative influence of charging current is partially eliminated in the same way as in normal pulse voltammetry (NPV). Moreover, subtraction of the charging current sampled before the application of the pulse further decreases its negative influence. Due to the more enhanced signal (faradaic current) to noise (charging current) ratio, the limit of detection is lower than with NPV. The sensitivity of DPV depends on the reversibility of the electrode reaction of the analyte. + https://en.wikipedia.org/wiki/Differential_pulse_voltammetry + https://doi.org/10.1515/pac-2018-0109 + + + + + - Gibbs energy per amount of substance. - MolarGibbsEnergy - MolarGibbsEnergy - https://www.wikidata.org/wiki/Q88863324 - 9-6.4 - Gibbs energy per amount of substance. + Permittivity divided by electric constant. + RelativePermittivity + RelativePermittivity + https://qudt.org/vocab/unit/PERMITTIVITY_REL + https://www.wikidata.org/wiki/Q4027242 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-12-13 + 6-15 + Permittivity divided by electric constant. + + + + + + + Square root of the product of electron and hole density in a semiconductor. + IntrinsicCarrierDensity + IntrinsicCarrierDensity + https://qudt.org/vocab/quantitykind/IntinsicCarrierDensity + https://www.wikidata.org/wiki/Q1303188 + 12-29.3 + Square root of the product of electron and hole density in a semiconductor. - + - - + + T-4 L+3 M+1 I-2 Θ0 N0 J0 - - + + + InversePermittivityUnit + InversePermittivityUnit + + + + - - + + T0 L0 M+1 I0 Θ0 N-1 J0 - - + + + + MassPerAmountUnit + MassPerAmountUnit + + + + - - - 1 + + T-2 L+1 M+1 I-1 Θ0 N0 J0 - - - An integer number. - Integer - Integer - An integer number. + + + + MagneticPotentialUnit + MagneticPotentialUnit - + @@ -18014,783 +17367,873 @@ Unit of degeneracy in quantum mechanics - + - Disintegrations per unit time dN/dt for an atomic nucleus divided by the number of nuclei N existing at the same time t. - DecayConstant - DisintegrationConstant - DecayConstant - https://qudt.org/vocab/quantitykind/DecayConstant - https://www.wikidata.org/wiki/Q11477200 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-11 - 10-24 - Disintegrations per unit time dN/dt for an atomic nucleus divided by the number of nuclei N existing at the same time t. - https://doi.org/10.1351/goldbook.D01538 + Activity per unit volume of the sample. + ActivityDensity + ActivityConcentration + VolumetricActivity + VolumicActivity + ActivityDensity + https://qudt.org/vocab/quantitykind/ActivityConcentration + https://www.wikidata.org/wiki/Q423263 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-09 + 10-29 + Activity per unit volume of the sample. - - - - - - - - - - - Minus - Minus + + + + Coefficient of heat transfer when heat exchange takes place between a body at thermodynamic temperature Ts and its surroundings that are at a reference temperature Tr. + SurfaceCoefficientOfHeatTransfer + SurfaceCoefficientOfHeatTransfer + https://qudt.org/vocab/quantitykind/SurfaceCoefficientOfHeatTransfer + https://www.wikidata.org/wiki/Q74770365 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-40 + 5-10.2 + Coefficient of heat transfer when heat exchange takes place between a body at thermodynamic temperature Ts and its surroundings that are at a reference temperature Tr. - + + + + SandMolds + SandMolds + + + + + + Type of scratching behaviour where the scratching force and the (displacement) deflection of the scratching tip are constant over the scratching distance during the test. + Planing + Hobeln + Planing + + + + + + Flanging + Flanging + + + + + + Magnetizing + Magnetizing + + + - T+1 L0 M-1 I+1 Θ0 N0 J0 + T-2 L+3 M-1 I0 Θ0 N0 J0 - - ElectricChargePerMassUnit - ElectricChargePerMassUnit + + NewtonianConstantOfGravityUnit + NewtonianConstantOfGravityUnit - - - - - A generic step in a workflow, that is not the begin or the end. - InternalStep - InternalStep - A generic step in a workflow, that is not the begin or the end. + + + + + + + + + + + + + + + FundamentalMatterParticle + FundamentalMatterParticle - + - T-1 L-3 M0 I0 Θ0 N+1 J0 + T0 L0 M-1 I0 Θ0 N+1 J0 - AmountPerVolumeTimeUnit - AmountPerVolumeTimeUnit - - - - - - - Time constant for recombination or trapping of minority charge carriers in semiconductors - CarrierLifetime - CarrierLifetime - https://qudt.org/vocab/quantitykind/CarrierLifetime - https://www.wikidata.org/wiki/Q5046374 - 12-32.2 - Time constant for recombination or trapping of minority charge carriers in semiconductors - - - - - - HotDipGalvanizing - Hot-dipGalvanizing - HotDipGalvanizing + AmountPerMassUnit + AmountPerMassUnit - - - - - + + - - + + + 1 - - Number of particles per time and area crossing a surface. - ParticleCurrentDensity - ParticleCurrentDensity - https://qudt.org/vocab/quantitykind/ParticleCurrent - https://www.wikidata.org/wiki/Q2400689 - 10-48 - Number of particles per time and area crossing a surface. - - - - - - - - - + + + 2 - - Vector field quantity E which exerts on any charged particle at rest a force F equal to the product of E and the electric charge Q of the particle. - ElectricFieldStrength - ElectricFieldStrength - https://qudt.org/vocab/quantitykind/ElectricFieldStrength - https://www.wikidata.org/wiki/Q20989 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-18 - 6-10 - Vector field quantity E which exerts on any charged particle at rest a force F equal to the product of E and the electric charge Q of the particle. + + An uncharged subatomic particle found in the atomic nucleus. + Neutron + Neutron + An uncharged subatomic particle found in the atomic nucleus. + https://en.wikipedia.org/wiki/Neutron - - - + + + - StatisticalWeightOfSubsystem - StatisticalWeightOfSubsystem - https://www.wikidata.org/wiki/Q96207431 - 9-36.1 + DebyeTemperature + DebyeTemperature + https://qudt.org/vocab/quantitykind/DebyeTemperature + https://www.wikidata.org/wiki/Q3517821 + 12-11 + + + + + + Draw forming by drawing a workpiece through a tool opening that is narrowed in the drawing direction. + DrawForming + DrawForming - - + + + - MetallicMaterial - MetallicMaterial + Matter composed of only matter particles, excluding anti-matter particles. + OrdinaryMatter + OrdinaryMatter + Matter composed of only matter particles, excluding anti-matter particles. - - - - A CausalSystem that includes quantum parts that are not bonded with the rest. - PhysicalPhenomena - PhysicalPhenomena - A CausalSystem that includes quantum parts that are not bonded with the rest. + + + + + + + + + + + + + + + + + + + + Antimatter is matter that is composed only of the antiparticles of those that constitute ordinary matter. + This branch is not expanded due to the limited use of such entities. + AntiMatter + AntiMatter + Antimatter is matter that is composed only of the antiparticles of those that constitute ordinary matter. + This branch is not expanded due to the limited use of such entities. - - + + + - Quantities categorised according to ISO 80000-7. - LightAndRadiationQuantity - LightAndRadiationQuantity - Quantities categorised according to ISO 80000-7. - - - - - - - - - - - - - - - - - - - - - - - TopQuark - TopQuark - https://en.wikipedia.org/wiki/Top_quark + Rotation + Rotation + https://www.wikidata.org/wiki/Q76435127 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=102-05-22 + 3-16 - - + + - Most instruments show plots of the current at the end of the forward-going pulse and of the backward-going pulse vs. the potential, as well as their difference. This can give valuable information on the kinetics of the electrode reaction and the electrode process. - The current is sampled just before the end of the forward- going pulse and of the backward-going pulse and the difference of the two sampled currents is plotted versus the applied potential of the potential or staircase ramp. The square-wave voltammogram is peak-shaped - The sensitivity of SWV depends on the reversibility of the electrode reaction of the analyte. - voltammetry in which a square-wave potential waveform is superimposed on an underlying linearly varying potential ramp or staircase ramp + electrochemical method that measures the voltage response of an electrochemical cell under galvanostatic conditions to short interruptions in the current - SquareWaveVoltammetry - OSWV - OsteryoungSquareWaveVoltammetry - SWV - SquareWaveVoltammetry - https://www.wikidata.org/wiki/Q4016323 - voltammetry in which a square-wave potential waveform is superimposed on an underlying linearly varying potential ramp or staircase ramp - https://en.wikipedia.org/wiki/Squarewave_voltammetry - https://doi.org/10.1515/pac-2018-0109 + ICI + IntermittentCurrentInterruptionMethod + ICI + electrochemical method that measures the voltage response of an electrochemical cell under galvanostatic conditions to short interruptions in the current - - - - - T-2 L+3 M+1 I-1 Θ0 N0 J0 - - - - - MagneticDipoleMomentUnit - MagneticDipoleMomentUnit + + + + Heat capacity at constant pressure. + IsobaricHeatCapacity + HeatCapacityAtConstantPressure + IsobaricHeatCapacity + https://www.wikidata.org/wiki/Q112187490 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-49 + 5-16.2 + Heat capacity at constant pressure. - - - - - T-4 L+2 M+1 I-1 Θ0 N0 J0 - - - + + + + - ElectricPotentialPerTimeUnit - ElectricPotentialPerTimeUnit + Amount of heat through a surface during a time interval divided by the duration of this interval. + HeatFlowRate + HeatFlowRate + https://qudt.org/vocab/quantitykind/HeatFlowRate + https://www.wikidata.org/wiki/Q12160631 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-36 + 5-7 + Amount of heat through a surface during a time interval divided by the duration of this interval. - + - + - Kinetic energy released per mass. - Kerma - Kerma - https://qudt.org/vocab/quantitykind/Kerma - https://www.wikidata.org/wiki/Q1739288 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-36 - 10-86.1 - Kinetic energy released per mass. + Thickness of the attenuating layer that reduces the quantity of interest of a unidirectional beam of infinitesimal width to half of its initial value. + HalfValueThickness + HalfValueThickness + https://qudt.org/vocab/quantitykind/Half-ValueThickness + https://www.wikidata.org/wiki/Q127526 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-04-34 + 10-53 + Thickness of the attenuating layer that reduces the quantity of interest of a unidirectional beam of infinitesimal width to half of its initial value. - - - - - + + + + Shortest distance between two surfaces limiting a layer, when this distance can be considered to be constant over a region of a finite size. + Thickness + Thickness + https://www.wikidata.org/wiki/Q3589038 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-01-24 + 3-1.4 + Shortest distance between two surfaces limiting a layer, when this distance can be considered to be constant over a region of a finite size. + + + + - - + + + 1 - - SectionModulus - SectionModulus - https://qudt.org/vocab/quantitykind/SectionModulus - https://www.wikidata.org/wiki/Q1930808 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-31 - 4-22 + + + + + 1 + + + + A quantity value is not necessarily a property, since it is possible to write "10 kg", without assigning this quantity to a specific object. + A symbolic that has parts a numerical object and a reference expressing the value of a quantity (expressed as the product of the numerical and the unit). + Following the International Vocabulary of Metrology (VIM), EMMO distinguishes between a quantity (a property) and the quantity value (a numerical and a reference). + +So, for the EMMO the symbol "kg" is not a physical quantity but simply a 'Symbolic' object categorized as a 'MeasurementUnit'. + +While the string "1 kg" is a 'QuantityValue'. + QuantityValue + QuantityValue + A symbolic that has parts a numerical object and a reference expressing the value of a quantity (expressed as the product of the numerical and the unit). + 6.8 m +0.9 km +8 K +6 MeV +43.5 HRC(150 kg) + quantity value + A quantity value is not necessarily a property, since it is possible to write "10 kg", without assigning this quantity to a specific object. - - - - - A quantum is the EMMO mereological atomistic and causal reductionistic entity. To avoid confusion with the concept of atom coming from physics and to underline the causal reductionistic approach, we will use the expression quantum mereology, instead of atomistic mereology. - A quantum is the most fundamental item (both mereologically and causally) and is considered causally self-connected by definition. -The quantum concept recalls the fact that there is lower epistemological limit to our knowledge of the universe, related to the uncertainity principle. -Space and time emerge following the network of causal connections between quantum objects. So quantum objects are adimensional objects, that precede space and time dimensions: they are simple beings (in greek οντα). -Using physics concepts, we can think the quantum as an elementary particle (e.g. an electron) in a specific state between two causal interactions. - The class of entities without proper parts. - The class of the mereological and causal fundamental entities. - Quantum - Quantum - A quantum is the most fundamental item (both mereologically and causally) and is considered causally self-connected by definition. -The quantum concept recalls the fact that there is lower epistemological limit to our knowledge of the universe, related to the uncertainity principle. -Space and time emerge following the network of causal connections between quantum objects. So quantum objects are adimensional objects, that precede space and time dimensions: they are simple beings (in greek οντα). -Using physics concepts, we can think the quantum as an elementary particle (e.g. an electron) in a specific state between two causal interactions. - The class of entities without proper parts. - The class of the mereological and causal fundamental entities. - From a physics perspective a quantum can be related to smallest identifiable entities, according to the limits imposed by the uncertainty principle in space and time measurements. -However, the quantum mereotopology approach is not restricted only to physics. For example, in a manpower management ontology, a quantum can stand for an hour (time) of a worker (space) activity. - A quantum is the EMMO mereological atomistic and causal reductionistic entity. To avoid confusion with the concept of atom coming from physics and to underline the causal reductionistic approach, we will use the expression quantum mereology, instead of atomistic mereology. + + + + + Vector quantity expressing the internal angular momentum of a particle or a particle system. + Spin + Spin + https://qudt.org/vocab/quantitykind/Spin + https://www.wikidata.org/wiki/Q133673 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-05-09 + 10-10 + Vector quantity expressing the internal angular momentum of a particle or a particle system. - + + + + The sample after having been subjected to a characterization process + CharacterisedSample + CharacterisedSample + The sample after having been subjected to a characterization process + + + + + + Distance, where one point is located on an axis or within a closed non self-intersecting curve or surface. + RadialDistance + RadialDistance + https://qudt.org/vocab/quantitykind/RadialDistance + https://www.wikidata.org/wiki/Q1578234 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-01-26 + 3-1.9 + Distance, where one point is located on an axis or within a closed non self-intersecting curve or surface. + + + - T-3 L-2 M+2 I0 Θ0 N0 J0 + T-2 L+4 M+1 I0 Θ0 N0 J0 - SquarePressureTimeUnit - SquarePressureTimeUnit + EnergyAreaUnit + EnergyAreaUnit - - - - - - - - - - - - - Quotient of Peltier heat power developed at a junction, and the electric current flowing from substance a to substance b. - PeltierCoefficient - PeltierCoefficient - https://qudt.org/vocab/quantitykind/PeltierCoefficient - https://www.wikidata.org/wiki/Q105801003 - 12-22 - Quotient of Peltier heat power developed at a junction, and the electric current flowing from substance a to substance b. + + + + action to disassemble a product or a component by removing all or some of its constituent parts with the intent to salvage + Dismantling + Demontage + Dismantling + action to disassemble a product or a component by removing all or some of its constituent parts with the intent to salvage - - + + - Folding - Folding + Archetype join attaches two workpiece with geometrically defined shape together, using supplementary workpiece made of amorphous material (e.g. powder). + ArchetypeJoin + ArchetypeJoin + Archetype join attaches two workpiece with geometrically defined shape together, using supplementary workpiece made of amorphous material (e.g. powder). - - - - - Duration required for the neutron fluence rate in a reactor to change by the factor e when the fluence rate is rising or falling exponentially. - ReactorTimeConstant - ReactorTimeConstant - https://qudt.org/vocab/quantitykind/ReactorTimeConstant - https://www.wikidata.org/wiki/Q99518950 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-07-04 - 10-79 - Duration required for the neutron fluence rate in a reactor to change by the factor e when the fluence rate is rising or falling exponentially. + + + + + A estimation of a property using a functional icon. + Simulation + Modelling + Simulation + A estimation of a property using a functional icon. + I calculate the electrical conductivity of an Ar-He plasma with the Chapman-Enskog method and use the value as property for it. - - - - - A quantity whos value that cannot be univocally determined and depends on an agent (e.g. a human individual, a community). - SubjectiveProperty - SubjectiveProperty - A quantity whos value that cannot be univocally determined and depends on an agent (e.g. a human individual, a community). - The measure of beauty on a scale from 1 to 10. + + + + Strengthening by rolling is the strengthening of component surfaces by mechanically generating compressive stresses in the component surface and consolidating the material. + HardeningByRolling + VerfestigendurchWalzen + HardeningByRolling + Strengthening by rolling is the strengthening of component surfaces by mechanically generating compressive stresses in the component surface and consolidating the material. - - + + - - - - - - - - Mathematical description in crystallography. - StructureFactor - StructureFactor - https://qudt.org/vocab/quantitykind/StructureFactor - https://www.wikidata.org/wiki/Q900684 - 12-5.4 - Mathematical description in crystallography. + For type II superconductors, the threshold magnetic flux density for disappearance of bulk superconductivity. + UpperCriticalMagneticFluxDensity + UpperCriticalMagneticFluxDensity + https://qudt.org/vocab/quantitykind/UpperCriticalMagneticFluxDensity + https://www.wikidata.org/wiki/Q106127634 + 12-36.3 + For type II superconductors, the threshold magnetic flux density for disappearance of bulk superconductivity. - - - - - A physical constant relating energy at the individual particle level with temperature. It is the gas constant R divided by the Avogadro constant. + + + + DieCasting + DieCasting + -It defines the Kelvin unit in the SI system. - The DBpedia definition (http://dbpedia.org/page/Boltzmann_constant) is outdated as May 20, 2019. It is now an exact quantity. - BoltzmannConstant - BoltzmannConstant - http://qudt.org/vocab/constant/BoltzmannConstant - A physical constant relating energy at the individual particle level with temperature. It is the gas constant R divided by the Avogadro constant. + + + + Casting + Casting + -It defines the Kelvin unit in the SI system. - https://doi.org/10.1351/goldbook.B00695 + + + + The derivative of the electric charge of a system with respect to the area. + SurfaceDensityOfElectricCharge + AreicElectricCharge + SurfaceChargeDensity + SurfaceDensityOfElectricCharge + https://www.wikidata.org/wiki/Q12799324 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-08 + 6-4 + The derivative of the electric charge of a system with respect to the area. + https://doi.org/10.1351/goldbook.S06159 - - + + - + - Logarithmic measure of the number of available states of a system. - May also be referred to as a measure of order of a system. - Entropy - Entropy - http://qudt.org/vocab/quantitykind/Entropy - 5-18 - https://doi.org/10.1351/goldbook.E02149 - - - - - - Normal pulse polarography is NPV in which a dropping mercury electrode is used as the working electrode. A pulse is applied just before the mechanically enforced end of the drop. The pulse width is usually 10 to 20 % of the drop time. The drop dislodgment is synchro- nized with current sampling, which is carried out just before the end of the pulse, as in NPV. - Sigmoidal wave-shaped voltammograms are obtained. - The current is sampled at the end of the pulse and then plotted versus the potential of the pulse. - The current is sampled just before the end of the pulse, when the charging current is greatly diminished. In this way, the ratio of faradaic current to charging current is enhanced and the negative influence of charging current is partially eliminated. Due to the improved signal (faradaic current) to noise (charging current) ratio, the limit of detec- tion is lowered. - The sensitivity of NPV is not affected by the reversibility of the electrode reaction of the analyte. - voltammetry in which potential pulses of amplitude increasing by a constant increment and with a pulse width of 2 to 200 ms are superimposed on a constant initial potential - - NormalPulseVoltammetry - NPV - NormalPulseVoltammetry - voltammetry in which potential pulses of amplitude increasing by a constant increment and with a pulse width of 2 to 200 ms are superimposed on a constant initial potential - https://doi.org/10.1515/pac-2018-0109 - - - - - - An object that enables or facilitate an agent in the execution of a process that modifies the surrounding environment. - Tool - Tool - An object that enables or facilitate an agent in the execution of a process that modifies the surrounding environment. + Vector quantity obtained at a given point by adding the electric polarization P to the product of the electric field strength E and the electric constant ε0. + ElectricFluxDensity + ElectricDisplacement + ElectricFluxDensity + https://qudt.org/vocab/quantitykind/ElectricDisplacementField + https://www.wikidata.org/wiki/Q371907 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-40 + 6-12 + Vector quantity obtained at a given point by adding the electric polarization P to the product of the electric field strength E and the electric constant ε0. - - - - + + - - + + T0 L+2 M-1 I0 Θ0 N0 J0 - - - A mathematical entity based on a fundamental physics theory which defines the relations between physics quantities of an entity. - CEN Workshop Agreement – CWA 17284 “Materials modelling – terminology, classification and metadata” - PhysicsBasedModel - PhysicsBasedModel - A mathematical entity based on a fundamental physics theory which defines the relations between physics quantities of an entity. + + + + AreaPerMassUnit + AreaPerMassUnit + + + + + + + Inverse of the quality factor. + LossFactor + LossFactor + https://qudt.org/vocab/quantitykind/LossFactor + https://www.wikidata.org/wiki/Q79468728 + 6-54 + Inverse of the quality factor. - - - - - + + - - + + T-1 L+2 M-1 I0 Θ+1 N0 J0 - + + - Power transferred per unit area. - Intensity - Intensity - Power transferred per unit area. - https://en.wikipedia.org/wiki/Intensity_(physics) + TemperatureAreaPerMassTimeUnit + TemperatureAreaPerMassTimeUnit - - - - - distance between successive lattice planes - LatticePlaneSpacing - LatticePlaneSpacing - https://qudt.org/vocab/quantitykind/LatticePlaneSpacing - https://www.wikidata.org/wiki/Q105488046 - 12-3 - distance between successive lattice planes + + + + A law that provides a connection between a property of the object and other properties, capturing a fundamental physical phenomena. + PhysicalLaw + PhysicalLaw + A law that provides a connection between a property of the object and other properties, capturing a fundamental physical phenomena. - - - - Distance is the norm of Displacement. - Shortest path length between two points in a metric space. - Distance - Distance - https://qudt.org/vocab/quantitykind/Distance - https://www.wikidata.org/wiki/Q126017 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=102-03-24 - https://dbpedia.org/page/Distance - 3-1.8 - Shortest path length between two points in a metric space. - https://en.wikipedia.org/wiki/Distance + + + + + T0 L-2 M+1 I0 Θ0 N0 J0 + + + + + AreaDensityUnit + AreaDensityUnit - - + + + + + T0 L-2 M0 I0 Θ0 N0 J0 + + + - Internal energy per unit mass. - SpecificInternalEnergy - SpecificInternalEnergy - https://qudt.org/vocab/quantitykind/SpecificInternalEnergy - https://www.wikidata.org/wiki/Q76357367 - 5-21.2 - Internal energy per unit mass. - - - - - - ContinuousCasting - ContinuousCasting + PerAreaUnit + PerAreaUnit - + - T+1 L+1 M0 I+1 Θ0 N0 J0 + T-1 L-3 M+1 I0 Θ0 N0 J0 - - ElectricDipoleMomentUnit - ElectricDipoleMomentUnit + + MassPerVolumeTimeUnit + MassPerVolumeTimeUnit - - - - A reference unit provided by a measurement procedure. - Procedure units and measurement units are disjoint. - ProcedureUnit - MeasurementProcedure - ProcedureUnit - A reference unit provided by a measurement procedure. - Rockwell C hardness of a given sample (150 kg load): 43.5HRC(150 kg) - Procedure units and measurement units are disjoint. + + + + GluonType3 + GluonType3 - - + + + + + A neutrino belonging to the first generation of leptons. + ElectronNeutrino + ElectronNeutrino + A neutrino belonging to the first generation of leptons. + https://en.wikipedia.org/wiki/Electron_neutrino + + + + - High level description of the user case. It can include the properties of the material, the conditions of the environment and possibly mentioning which are the industrial sectors of reference. - UserCase - UserCase - High level description of the user case. It can include the properties of the material, the conditions of the environment and possibly mentioning which are the industrial sectors of reference. + a technique used to measure the voltage of a cell under a low applied current as an estimate for the open-circuit voltage + + PseudoOpenCircuitVoltageMethod + PseudoOCV + PseudoOpenCircuitVoltageMethod + a technique used to measure the voltage of a cell under a low applied current as an estimate for the open-circuit voltage - + + - + + + + + + + - Quotient of change of volume and original volume. - RelativeVolumeStrain - BulkStrain - VolumeStrain - RelativeVolumeStrain - https://qudt.org/vocab/quantitykind/VolumeStrain - https://www.wikidata.org/wiki/Q73432507 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-60 - 4-17.4 - Quotient of change of volume and original volume. - https://doi.org/10.1351/goldbook.V06648 - - - - - - A command language designed to be run by a command-line interpreter, like a Unix shell. - ShellScript - ShellScript - A command language designed to be run by a command-line interpreter, like a Unix shell. - https://en.wikipedia.org/wiki/Shell_script + SurfaceTension + 4-26 + SurfaceTension + https://qudt.org/vocab/quantitykind/SurfaceTension + https://www.wikidata.org/wiki/Q170749 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-42 + https://doi.org/10.1351/goldbook.S06192 - - - - An interpreted computer language for job control in computing. - CommandLanguage - CommandLanguage - An interpreted computer language for job control in computing. - Unix shell. -Batch programming languages. - https://en.wikipedia.org/wiki/Command_language + + + + Tensile testing, also known as tension testing, is a test in which a sample is subjected to a controlled tension until failure. Properties that are directly measured via a tensile test are ultimate tensile strength, breaking strength, maximum elongation and reduction in area. From these measurements the following properties can also be determined: Young's modulus, Poisson's ratio, yield strength, and strain-hardening characteristics. Uniaxial tensile testing is the most commonly used for obtaining the mechanical characteristics of isotropic materials. Some materials use biaxial tensile testing. The main difference between these testing machines being how load is applied on the materials. + + TensileTesting + TensionTest + TensileTesting + Tensile testing, also known as tension testing, is a test in which a sample is subjected to a controlled tension until failure. Properties that are directly measured via a tensile test are ultimate tensile strength, breaking strength, maximum elongation and reduction in area. From these measurements the following properties can also be determined: Young's modulus, Poisson's ratio, yield strength, and strain-hardening characteristics. Uniaxial tensile testing is the most commonly used for obtaining the mechanical characteristics of isotropic materials. Some materials use biaxial tensile testing. The main difference between these testing machines being how load is applied on the materials. - - - - FiberReinforcePlasticManufacturing - FiberReinforcePlasticManufacturing + + + + + GreenCharmQuark + GreenCharmQuark - - - - - - - - - - - - - A gaseous solution made of more than one component type. - GasSolution - GasMixture - GasSolution - A gaseous solution made of more than one component type. + + + + + + + + + + + + + + + + + + + + + CharmQuark + CharmQuark + https://en.wikipedia.org/wiki/Charm_quark - + - + - + - Absolute value of the electric charge of ions produced in dry air by X- or gamma radiation per mass of air. - Exposure - Exposure - https://qudt.org/vocab/quantitykind/Exposure - https://www.wikidata.org/wiki/Q336938 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-32 - 10-88 - Absolute value of the electric charge of ions produced in dry air by X- or gamma radiation per mass of air. + Electric charge per volume. + ElectricChargeDensity + VolumeElectricCharge + ElectricChargeDensity + https://qudt.org/vocab/quantitykind/ElectricChargeDensity + https://www.wikidata.org/wiki/Q69425629 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-07 + 6-3 + Electric charge per volume. + https://doi.org/10.1351/goldbook.C00988 - - - - - - - - - - - - - - - The class of entities that have no spatial structure. - The concept is based on the common usage of the word "particle", that is used to identify both a specific state of an elementary particle (a quantum) and both the chain of quantums that expresses the evolution of the particle in time. - The union of Elementary and Quantum classes. - CausalParticle - CausalParticle - The concept is based on the common usage of the word "particle", that is used to identify both a specific state of an elementary particle (a quantum) and both the chain of quantums that expresses the evolution of the particle in time. - The union of Elementary and Quantum classes. - The class of entities that have no spatial structure. + + + + + T-1 L-2 M0 I0 Θ0 N0 J0 + + + + + PerAreaTimeUnit + PerAreaTimeUnit - - + + + + + T0 L-3 M+1 I0 Θ0 N0 J0 + + + + + DensityUnit + DensityUnit + + + + + + A causal multipath system is a system made of causal paths that are not interacting between each others, or possibly merge and fork. + A physically unbounded system is a combination of decays and/or annihilations, without any space-like interaction between elementary particles. + PhysicallyNonInteracting + PhysicallyNonInteracting + A causal multipath system is a system made of causal paths that are not interacting between each others, or possibly merge and fork. + A physically unbounded system is a combination of decays and/or annihilations, without any space-like interaction between elementary particles. + + + + + + + Gibbs energy per amount of substance. + MolarGibbsEnergy + MolarGibbsEnergy + https://www.wikidata.org/wiki/Q88863324 + 9-6.4 + Gibbs energy per amount of substance. + + + + + + + Critical thermodynamic temperature of an antiferromagnet. + NeelTemperature + NeelTemperature + https://www.wikidata.org/wiki/Q830311 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-12-52 + 12-35.2 + Critical thermodynamic temperature of an antiferromagnet. + + + + - Scanning Tunneling Microscopy, or STM, is an imaging technique used to obtain ultra-high resolution images at the atomic scale, without using light or electron beams. - - ScanningTunnelingMicroscopy - STM - ScanningTunnelingMicroscopy - Scanning Tunneling Microscopy, or STM, is an imaging technique used to obtain ultra-high resolution images at the atomic scale, without using light or electron beams. + Compression tests characterize material and product strength and stiffness under applied crushing loads. These tests are typically conducted by applying compressive pressure to a test specimen using platens or specialized fixtures with a testing machine that produces compressive loads. + CompressionTesting + CompressionTesting + Compression tests characterize material and product strength and stiffness under applied crushing loads. These tests are typically conducted by applying compressive pressure to a test specimen using platens or specialized fixtures with a testing machine that produces compressive loads. - - + + + + + In condensed matter physics, the square root of the product of diffusion coefficient and lifetime. + DiffusionLength + DiffusionLength + https://qudt.org/vocab/quantitykind/SolidStateDiffusionLength + https://www.wikidata.org/wiki/Q106097176 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=521-02-60 + 12-33 + In condensed matter physics, the square root of the product of diffusion coefficient and lifetime. + + + + - The resulting alternating current is plotted versus imposed DC potential. The obtained AC voltammogram is peak-shaped. - voltammetry in which a sinusoidal alternating potential of small amplitude (10 to 50 mV) of constant frequency (10 Hz to 100 kHz) is superimposed on a slowly and linearly varying potential ramp + Description of performed statistical analysis to check for data reproducibility (e.g. easily reproducible for everyone, reproducible for a domain expert, reproducible only for Data processing Expert) - ACVoltammetry - ACV - ACVoltammetry - https://www.wikidata.org/wiki/Q120895154 - voltammetry in which a sinusoidal alternating potential of small amplitude (10 to 50 mV) of constant frequency (10 Hz to 100 kHz) is superimposed on a slowly and linearly varying potential ramp - https://doi.org/10.1515/pac-2018-0109 + ProcessingReproducibility + ProcessingReproducibility + Description of performed statistical analysis to check for data reproducibility (e.g. easily reproducible for everyone, reproducible for a domain expert, reproducible only for Data processing Expert) - - - + + + + Manufacturing by separating particles of material from a solid body by non-mechanical means. Ablation refers both to the removal of layers of material and to the separation of workpiece parts. The production process of ablation is considered in its stationary instantaneous state, independently of the application of auxiliary processes necessary to initiate the process. Ablation is divided into three subgroups according to the order point of view (OGP) "process in the effective zone on the surface of the workpiece": - thermal ablation; - chemical ablation; - electrochemical ablation. + Ablation + Abtragen + Ablation + + + + + + A language object that follows syntactic rules of a programming language. + A programming language object can also be a fragment (e.g. a C function) not suitable for exectution. + ProgrammingLanguage + Code + SoftwareCode + ProgrammingLanguage + A language object that follows syntactic rules of a programming language. + A programming language object can also be a fragment (e.g. a C function) not suitable for exectution. + Entities are not necessarily digital data, but can be code fragments printed on paper. + + + + + + A computer language by which a human can specify an executable problem solution to a computer. + ConstructionLanguage + ConstructionLanguage + A computer language by which a human can specify an executable problem solution to a computer. + https://en.wikipedia.org/wiki/Software_construction#Construction_languages + + + + - - - - - - + + T+1 L+1 M0 I+1 Θ0 N0 J0 - - - Used to break-down a CalibrationProcess into his specific tasks. - CalibrationTask - CalibrationTask - Used to break-down a CalibrationProcess into his specific tasks. + + + + LengthTimeCurrentUnit + LengthTimeCurrentUnit - - - - Punctuation - Punctuation + + + + A causal collapse is a fundamental interaction that is expressed as a complete bipartite directed graph K(m,n), when m>n. + CausalCollapse + CausalCollapse + A causal collapse is a fundamental interaction that is expressed as a complete bipartite directed graph K(m,n), when m>n. - - - - An holistic spatial part of a whole. - NonTemporalRole - HolisticSpatialPart - NonTemporalRole - An holistic spatial part of a whole. + + + + + GreenCharmAntiQuark + GreenCharmAntiQuark - - - + + + - Distance in a superconductor over which the effect of a perturbation is appreciable at zero thermodynamic temperature - CoherenceLength - CoherenceLength - https://www.wikidata.org/wiki/Q1778793 - 12-38.2 - Distance in a superconductor over which the effect of a perturbation is appreciable at zero thermodynamic temperature + Quotient of the product of the electric charge of a particle and the magnitude of the magnetic flux density of the magnetic field, and the particle mass. + CyclotronAngularFrequency + CyclotronAngularFrequency + https://qudt.org/vocab/quantitykind/CyclotronAngularFrequency + https://www.wikidata.org/wiki/Q97708211 + 10-16 + Quotient of the product of the electric charge of a particle and the magnitude of the magnetic flux density of the magnetic field, and the particle mass. + + + + + + Complex representation of an oscillating voltage. + VoltagePhasor + VoltagePhasor + https://qudt.org/vocab/quantitykind/VoltagePhasor + https://www.wikidata.org/wiki/Q78514605 + 6-50 + Complex representation of an oscillating voltage. - - - - A characterisation protocol is defined whenever it is desirable to standardize a laboratory method to ensure successful replication of results by others in the same laboratory or by other laboratories. - - CharacterisationProtocol - CharacterisationProtocol - A characterisation protocol is defined whenever it is desirable to standardize a laboratory method to ensure successful replication of results by others in the same laboratory or by other laboratories. + + + + For a substance in a mixture, the absolute activity of the pure substance at the same temperature but at standard pressure. + StandardAbsoluteActivity + StandardAbsoluteActivityInAMixture + StandardAbsoluteActivity + https://qudt.org/vocab/quantitykind/StandardAbsoluteActivity + https://www.wikidata.org/wiki/Q89406159 + 9-23 + For a substance in a mixture, the absolute activity of the pure substance at the same temperature but at standard pressure. - - - - - + + - - + + - - - quotient of Thomson heat power developed, and the electric current and temperature difference - ThomsonCoefficient - ThomsonCoefficient - https://qudt.org/vocab/quantitykind/ThomsonCoefficient - https://www.wikidata.org/wiki/Q105801233 - 12-23 - quotient of Thomson heat power developed, and the electric current and temperature difference + + A well formed tessellation with tiles that are all temporal. + TemporalTiling + TemporalTiling + A well formed tessellation with tiles that are all temporal. - + @@ -18798,1391 +18241,1415 @@ Batch programming languages. - + - JouleThomsonCoefficient - JouleThomsonCoefficient - https://www.wikidata.org/wiki/Q93946998 - 5-24 + Negative quotient of Helmholtz energy and temperature. + MassieuFunction + MassieuFunction + https://qudt.org/vocab/quantitykind/MassieuFunction + https://www.wikidata.org/wiki/Q3077625 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-26 + 5-22 + Negative quotient of Helmholtz energy and temperature. - - - - - T+2 L-5 M-1 I0 Θ0 N0 J0 - - - - - EnergyDensityOfStatesUnit - EnergyDensityOfStatesUnit - + + + + Gamma-ray spectroscopy is the qualitative study of the energy spectra of gamma-ray sources, such as in the nuclear industry, geochemical investigation, and astrophysics.[1] Gamma-ray spectrometry, on the other hand, is the method used to acquire a quantitative spectrum measurement.[2] - - - - Change of the relative positions of parts of a body, excluding a displacement of the body as a whole. - Strain - Strain - http://qudt.org/vocab/quantitykind/Strain - 4-17.1 - Change of the relative positions of parts of a body, excluding a displacement of the body as a whole. +Most radioactive sources produce gamma rays, which are of various energies and intensities. When these emissions are detected and analyzed with a spectroscopy system, a gamma-ray energy spectrum can be produced. + +A detailed analysis of this spectrum is typically used to determine the identity and quantity of gamma emitters present in a gamma source, and is a vital tool in radiometric assay. The gamma spectrum is characteristic of the gamma-emitting nuclides contained in the source, just like in an optical spectrometer, the optical spectrum is characteristic of the material contained in a sample. + + GammaSpectrometry + GammaSpectrometry + Gamma-ray spectroscopy is the qualitative study of the energy spectra of gamma-ray sources, such as in the nuclear industry, geochemical investigation, and astrophysics.[1] Gamma-ray spectrometry, on the other hand, is the method used to acquire a quantitative spectrum measurement.[2] + +Most radioactive sources produce gamma rays, which are of various energies and intensities. When these emissions are detected and analyzed with a spectroscopy system, a gamma-ray energy spectrum can be produced. + +A detailed analysis of this spectrum is typically used to determine the identity and quantity of gamma emitters present in a gamma source, and is a vital tool in radiometric assay. The gamma spectrum is characteristic of the gamma-emitting nuclides contained in the source, just like in an optical spectrometer, the optical spectrum is characteristic of the material contained in a sample. - - - - - A coarse dispersion of solids in a liquid continuum phase. - LiquidSolidSuspension - LiquidSolidSuspension - A coarse dispersion of solids in a liquid continuum phase. - Mud + + + + + + ∇ + + + + Gradient + Gradient - - - - - GreenCharmAntiQuark - GreenCharmAntiQuark + + + + + An object which is an holistic spatial part of a process. + Participant + Participant + An object which is an holistic spatial part of a process. + A student during an examination. - + - + - + - Time derivative of kerma. - KermaRate - KermaRate - https://qudt.org/vocab/quantitykind/KermaRate - https://www.wikidata.org/wiki/Q99713105 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-12-28 - 10-86.2 - Time derivative of kerma. + Parameter in the expression for the thermionic emission current density J for a metal in terms of the thermodynamic temperature T and work function. + RichardsonConstant + RichardsonConstant + https://qudt.org/vocab/quantitykind/RichardsonConstant + https://www.wikidata.org/wiki/Q105883079 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-06-30 + 12-26 + Parameter in the expression for the thermionic emission current density J for a metal in terms of the thermodynamic temperature T and work function. - + + + + Data that can be decoded under a quantitative schema and also associated with a graphical number symbols. + NumericalData + NumericalData + Data that can be decoded under a quantitative schema and also associated with a graphical number symbols. + + + + + + + BlueBottomAntiQuark + BlueBottomAntiQuark + + + - T0 L-1 M+1 I0 Θ0 N0 J0 + T-3 L+3 M+1 I-1 Θ0 N0 J0 - - MassPerLengthUnit - MassPerLengthUnit - - - - - - - Conventional radius of sphere in which the nuclear matter is included, - NuclearRadius - NuclearRadius - https://qudt.org/vocab/quantitykind/NuclearRadius - https://www.wikidata.org/wiki/Q3535676 - 10-19.1 - Conventional radius of sphere in which the nuclear matter is included, + + ElectricFluxUnit + ElectricFluxUnit - - - - Quantify the raw data acquisition rate, if applicable. - - DataAcquisitionRate - DataAcquisitionRate - Quantify the raw data acquisition rate, if applicable. + + + + A function defined using functional notation. + A mathematical relation that relates each element in the domain (X) to exactly one element in the range (Y). + MathematicalFunction + FunctionDefinition + MathematicalFunction + A function defined using functional notation. + y = f(x) - - - - Force of gravity acting on a body. - Weight - Weight - http://qudt.org/vocab/quantitykind/Weight - 4-9.2 - https://doi.org/10.1351/goldbook.W06668 - + + + + An equation that define a new variable in terms of other mathematical entities. + DefiningEquation + DefiningEquation + An equation that define a new variable in terms of other mathematical entities. + The definition of velocity as v = dx/dt. - - - - - Quotient of the initial kinetic energy Ek of an ionizing charged particle and the total ionization Ni produced by that particle. - AverageEnergyLossPerElementaryChargeProduced - AverageEnergyLossPerElementaryChargeProduced - https://qudt.org/vocab/quantitykind/AverageEnergyLossPerElementaryChargeProduced - https://www.wikidata.org/wiki/Q98793042 - 10-60 - Quotient of the initial kinetic energy Ek of an ionizing charged particle and the total ionization Ni produced by that particle. - +The definition of density as mass/volume. - - - - All or part of the programs, procedures, rules, and associated documentation of an information processing system. - Software is usually used as a generic term for programs. However, in its broadest sense it can refer to all information (i.e., both programs and data) in electronic form and can provide a distinction from hardware, which refers to computers or other electronic systems on which software can exist and be use. -Here we explicitly include in the definition also all the data (e.g. source code, script files) that takes part to the building of the executable, are necessary to the execution of a program or that document it for the users. - Software - Software - All or part of the programs, procedures, rules, and associated documentation of an information processing system. - Software is usually used as a generic term for programs. However, in its broadest sense it can refer to all information (i.e., both programs and data) in electronic form and can provide a distinction from hardware, which refers to computers or other electronic systems on which software can exist and be use. -Here we explicitly include in the definition also all the data (e.g. source code, script files) that takes part to the building of the executable, are necessary to the execution of a program or that document it for the users. +y = f(x) - - - - - T-1 L+2 M0 I0 Θ0 N-1 J0 - - - + + + - DiffusivityUnit - DiffusivityUnit + Average number of fission neutrons, both prompt and delayed, emitted per neutron absorbed in a fissionable nuclide or in a nuclear fuel, as specified. + NeutronYieldPerAbsorption + NeutronYieldPerAbsorption + https://qudt.org/vocab/quantitykind/NeutronYieldPerAbsorption + https://www.wikidata.org/wiki/Q99159075 + 10-74.2 + Average number of fission neutrons, both prompt and delayed, emitted per neutron absorbed in a fissionable nuclide or in a nuclear fuel, as specified. - - - - PowderCoating - PowderCoating + + + + + RedUpQuark + RedUpQuark - - + + + + + - - + + - - A well formed tessellation with tiles that all spatial. - SpatialTiling - SpatialTiling - A well formed tessellation with tiles that all spatial. - - - - - - DataProcessingApplication - DataProcessingApplication + + Magnitude of the magnetic moment of an electron in a state with orbital angular momentum quantum number l=1 due to its orbital motion. + BohrMagneton + BohrMagneton + https://www.wikidata.org/wiki/Q737120 + 10-9.2 + Magnitude of the magnetic moment of an electron in a state with orbital angular momentum quantum number l=1 due to its orbital motion. - - - + + + + + - - - - - - + + - Number of protons in an atomic nucleus. - AtomicNumber - AtomicNumber - http://qudt.org/vocab/quantitykind/AtomicNumber - Number of protons in an atomic nucleus. - 10-1.1 - https://doi.org/10.1351/goldbook.A00499 - - - - - - - GreenBottomQuark - GreenBottomQuark - - - - - - - Volume of a constituent of a mixture divided by the sum of volumes of all constituents prior to mixing. - VolumeFraction - VolumeFraction - http://qudt.org/vocab/quantitykind/VolumeFraction - 9-14 - Volume of a constituent of a mixture divided by the sum of volumes of all constituents prior to mixing. - https://doi.org/10.1351/goldbook.V06643 + The derivative of the electric charge of a system with respect to the length. + LinearDensityOfElectricCharge + LinearDensityOfElectricCharge + https://www.wikidata.org/wiki/Q77267838 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-09 + 6-5 + The derivative of the electric charge of a system with respect to the length. - - - - A suspension of liquid droplets dispersed in a gas through an atomization process. - Spray - Spray - A suspension of liquid droplets dispersed in a gas through an atomization process. + + + + + + + + + + + + A discrete data whose elements can be decoded as tokens from one or more alphabets, without necessarily respecting syntactic rules. + A symbolic entity is not necessarily graphical (e.g. it doesn't necessarily have the physical shape of a letter), but its elements can be decoded and put in relation with an alphabet. +In other words, a sequence of bit "1000010" in a RAM (a non-graphical entity) is a valid symbol since it can be decoded through ASCII rules as the letter "B". The same holds for an entity standing for the sound of a voice saying: "Hello", since it can be decomposed in discrete parts, each of them being associated to a letter of an alphabet. + Symbolic + Symbolic + A discrete data whose elements can be decoded as tokens from one or more alphabets, without necessarily respecting syntactic rules. + fe780 +emmo +!5*a +cat +for(i=0;i<N;++i) + A symbolic entity is not necessarily graphical (e.g. it doesn't necessarily have the physical shape of a letter), but its elements can be decoded and put in relation with an alphabet. +In other words, a sequence of bit "1000010" in a RAM (a non-graphical entity) is a valid symbol since it can be decoded through ASCII rules as the letter "B". The same holds for an entity standing for the sound of a voice saying: "Hello", since it can be decomposed in discrete parts, each of them being associated to a letter of an alphabet. + A symbolic object possesses a reductionistic oriented structure. +For example, text is made of words, spaces and punctuations. Words are made of characters (i.e. atomic symbols). - - - - - A coarse dispersion of liquid in a gas continuum phase. - GasLiquidSuspension - GasLiquidSuspension - A coarse dispersion of liquid in a gas continuum phase. - Rain, spray. + + + + + T+4 L-3 M-1 I+2 Θ0 N0 J0 + + + + + PermittivityUnit + PermittivityUnit - - + + - Critical thermodynamic temperature of an antiferromagnet. - NeelTemperature - NeelTemperature - https://www.wikidata.org/wiki/Q830311 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-12-52 - 12-35.2 - Critical thermodynamic temperature of an antiferromagnet. + for metals, the resistivity extrapolated to zero thermodynamic temperature + ResidualResistivity + ResidualResistivity + https://qudt.org/vocab/quantitykind/ResidualResistivity + https://www.wikidata.org/wiki/Q25098876 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=815-13-61 + 12-17 + for metals, the resistivity extrapolated to zero thermodynamic temperature - - + + + + + + + - - T+1 L-1 M0 I+1 Θ0 N0 J0 + + - - + - ElectricChargePerLengthUnit - ElectricChargePerLengthUnit + Electric field strength divided by the current density. + ElectricResistivity + Resistivity + ElectricResistivity + http://qudt.org/vocab/quantitykind/Resistivity + https://www.wikidata.org/wiki/Q108193 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-12-04 + 6-44 + https://doi.org/10.1351/goldbook.R05316 - - - - - A process which is an holistic spatial part of a process. - In the EMMO the relation of participation to a process falls under mereotopology. + + + + A mapping that acts on elements of one space and produces elements of another space. + MathematicalOperator + MathematicalOperator + A mapping that acts on elements of one space and produces elements of another space. + The algebraic operator '+' that acts on two real numbers and produces one real number. + The differential operator that acts on a C1 real function and produces another real function. + -Since topological connection means causality, then the only way for a real world object to participate to a process is to be a part of it. - SubProcess - SubProcess - A process which is an holistic spatial part of a process. - Breathing is a subprocess of living for a human being. - In the EMMO the relation of participation to a process falls under mereotopology. + + + + + + + + + + + + + + + + + + + + + + + MathematicalSymbol + MathematicalSymbol + -Since topological connection means causality, then the only way for a real world object to participate to a process is to be a part of it. + + + + + + + + + + + + + An icon that not only resembles the object, but also can express some of the object's functions. + Replica + Replica + An icon that not only resembles the object, but also can express some of the object's functions. + A small scale replica of a plane tested in a wind gallery shares the same functionality in terms of aerodynamic behaviour of the bigger one. + Pinocchio is a functional icon of a boy since it imitates the external behaviour without having the internal biological structure of a human being (it is made of magic wood...). - - - - ArithmeticEquation - ArithmeticEquation - 1 + 1 = 2 + + + + Direct coulometry at controlled potential is usually carried out in convective mass trans- fer mode using a large surface working electrode. Reference and auxiliary electrodes are placed in separate compartments. The total electric charge is obtained by integration of the I–t curve or can be measured directly using a coulometer. + In principle, the end point at which I = 0, i.e. when the concentration of species under study becomes zero, can be reached only at infinite time. However, in practice, the electrolysis is stopped when the current has decayed to a few percent of the initial value and the charge passed at infinite time is calculated from a plot of charge Q(t) against time t. For a simple system under diffusion control Qt= Q∞[1 − exp(−DAt/Vδ)], where Q∞ = limt→∞Q(t) is the total charge passed at infinite time, D is the diffusion coefficient of the electroactive species, A the electrode area, δ the diffusion layer thickness, and V the volume of the solution. + coulometry at a preselected constant potential of the working electrode + + DirectCoulometryAtControlledPotential + DirectCoulometryAtControlledPotential + coulometry at a preselected constant potential of the working electrode + https://doi.org/10.1515/pac-2018-0109 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - AntiQuark - AntiQuark + + + + + In condensed matter physics, quotient of momentum and the reduced Planck constant. + AngularWaveNumber + AngularRepetency + AngularWaveNumber + https://qudt.org/vocab/quantitykind/AngularWavenumber + https://www.wikidata.org/wiki/Q105542089 + 12-9.1 + In condensed matter physics, quotient of momentum and the reduced Planck constant. - - + + - Average power over a period. - ActivePower - ActivePower - https://qudt.org/vocab/quantitykind/ActivePower - https://www.wikidata.org/wiki/Q20820042 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-11-42 - 6-56 - Average power over a period. + The number of waves per unit length along the direction of propagation. + Wavenumber + Wavenumber + http://qudt.org/vocab/quantitykind/Wavenumber + 3-18 + https://doi.org/10.1351/goldbook.W06664 - - - - Atom Probe Tomography (APT or 3D Atom Probe) is the only material analysis technique offering extensive capabilities for both 3D imaging and chemical composition measurements at the atomic scale (around 0.1-0.3nm resolution in depth and 0.3-0.5nm laterally). Since its early developments, Atom Probe Tomography has contributed to major advances in materials science. The sample is prepared in the form of a very sharp tip. The cooled tip is biased at high DC voltage (3-15 kV). The very small radius of the tip and the High Voltage induce a very high electrostatic field (tens V/nm) at the tip surface, just below the point of atom evaporation. Under laser or HV pulsing, one or more atoms are evaporated from the surface, by field effect (near 100% ionization), and projected onto a Position Sensitive Detector (PSD) with a very high detection efficiency. Ion efficiencies are as high as 80%, the highest analytical efficiency of any 3D microscopy. - AtomProbeTomography - 3D Atom Probe - APT - AtomProbeTomography - Atom Probe Tomography (APT or 3D Atom Probe) is the only material analysis technique offering extensive capabilities for both 3D imaging and chemical composition measurements at the atomic scale (around 0.1-0.3nm resolution in depth and 0.3-0.5nm laterally). Since its early developments, Atom Probe Tomography has contributed to major advances in materials science. The sample is prepared in the form of a very sharp tip. The cooled tip is biased at high DC voltage (3-15 kV). The very small radius of the tip and the High Voltage induce a very high electrostatic field (tens V/nm) at the tip surface, just below the point of atom evaporation. Under laser or HV pulsing, one or more atoms are evaporated from the surface, by field effect (near 100% ionization), and projected onto a Position Sensitive Detector (PSD) with a very high detection efficiency. Ion efficiencies are as high as 80%, the highest analytical efficiency of any 3D microscopy. + + + + + Degenerency + Multiplicity + Degenerency + https://www.wikidata.org/wiki/Q902301 + 9-36.2 + https://doi.org/10.1351/goldbook.D01556 - - - - - A constitutive process is a process that is holistically relevant for the definition of the whole. - A process which is an holistic spatial part of an object. - ConstitutiveProcess - ConstitutiveProcess - A process which is an holistic spatial part of an object. - Blood circulation in a human body. - A constitutive process is a process that is holistically relevant for the definition of the whole. + + + + Process of cutting a workpiece into smaller parts that are either doughter parts, samples (e.g. for testing) or scrap. + Cutting with circular or straight cutting motion, using a multi-toothed tool of small cutting width, the cutting motion being performed by the tool + Sawing + Sägen + Sawing + Process of cutting a workpiece into smaller parts that are either doughter parts, samples (e.g. for testing) or scrap. - - - - StandardEquilibriumConstant - ThermodynamicEquilibriumConstant - StandardEquilibriumConstant - https://www.wikidata.org/wiki/Q95993378 - 9-32 - https://doi.org/10.1351/goldbook.S05915 + + + + A manufacturing in which material is removed from the workpiece in the form of chips. + Machining + RemovingChipsFromWorkpiece + Machining + A manufacturing in which material is removed from the workpiece in the form of chips. - - - - - T-6 L-2 M+2 I0 Θ0 N0 J0 - - - + + - SquarePressurePerSquareTimeUnit - SquarePressurePerSquareTimeUnit + Sum of electric current density and displacement current density. + TotalCurrentDensity + TotalCurrentDensity + https://qudt.org/vocab/quantitykind/TotalCurrentDensity + https://www.wikidata.org/wiki/Q77680811 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-44 + 6-20 + Sum of electric current density and displacement current density. - - - + + - A coarse dispersion of solid in a gas continuum phase. - GasSolidSuspension - GasSolidSuspension - A coarse dispersion of solid in a gas continuum phase. - Dust, sand storm. - - - - - - - Quantity characterizing the deviation of a solvent from ideal behavior. - OsmoticCoefficientOfSolvent - OsmoticFactorOfSolvent - OsmoticCoefficientOfSolvent - https://qudt.org/vocab/quantitykind/OsmoticCoefficient - https://www.wikidata.org/wiki/Q5776102 - 9-27.2 - Quantity characterizing the deviation of a solvent from ideal behavior. - https://doi.org/10.1351/goldbook.O04342 + A meson with spin zero and even parity. + ScalarMeson + ScalarMeson + A meson with spin zero and even parity. + https://en.wikipedia.org/wiki/Scalar_meson - - + + + + + + - - T0 L0 M-1 I+1 Θ0 N0 J0 + + - - + + + + + + + + + + + - ElectricCurrentPerMassUnit - ElectricCurrentPerMassUnit + Quantity representing the spatial distribution of mass in a continuous material. + Density + MassConcentration + MassDensity + Density + http://qudt.org/vocab/quantitykind/Density + Mass per volume. + 4-2 + 9-10 + https://doi.org/10.1351/goldbook.D01590 + + + + + + A physics-based model based on a physics equation describing the behaviour of mesoscopic entities, i.e. a set of bounded atoms like a molecule, bead or nanoparticle. + MesoscopicModel + MesoscopicModel + A physics-based model based on a physics equation describing the behaviour of mesoscopic entities, i.e. a set of bounded atoms like a molecule, bead or nanoparticle. + + + + + + A language used to describe what a computer system should do. + SpecificationLanguage + SpecificationLanguage + A language used to describe what a computer system should do. + ACSL, VDM, LOTUS, MML, ... + https://en.wikipedia.org/wiki/Specification_language - - - - A linear potential scan, at sufficiently slow scan rates so as to ensure a steady state response, is usually applied. - Mass transport of a redox species enhanced by convection in this way results in a greater electric current. Convective mass transfer occurs up to the diffusion-limiting layer, within which the mass transfer is controlled by diffusion. Electroactive substance depletion outside the diffusion layer is annulled by convective mass transfer, which results in steady- state sigmoidal wave-shaped current-potential curves. - The forced flow can be accomplished by movement either of the solution (solution stirring, or channel flow), or of the electrode (electrode rotation or vibration). - voltammetry with forced flow of the solution towards the electrode surface - - HydrodynamicVoltammetry - HydrodynamicVoltammetry - https://www.wikidata.org/wiki/Q17028237 - voltammetry with forced flow of the solution towards the electrode surface - https://en.wikipedia.org/wiki/Hydrodynamic_voltammetry - https://doi.org/10.1515/pac-2018-0109 + + + + Speed with which the envelope of a wave propagates in space. + GroupVelocity + GroupSpeed + GroupVelocity + https://www.wikidata.org/wiki/Q217361 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-10-15 + https://dbpedia.org/page/Group_velocity + 3-23.2 + Speed with which the envelope of a wave propagates in space. + https://en.wikipedia.org/wiki/Group_velocity - + - T+2 L+1 M-1 I0 Θ0 N0 J0 + T-1 L0 M-1 I0 Θ0 N+1 J0 - PerPressureUnit - PerPressureUnit - - - - - - - - Dimensionless multiplicative unit prefix. - MetricPrefix - https://en.wikipedia.org/wiki/Metric_prefix - MetricPrefix - Dimensionless multiplicative unit prefix. - - - - - - A variable that stand for a numerical constant, even if it is unknown. - Constant - Constant - A variable that stand for a numerical constant, even if it is unknown. - - - - - - Specific heat capacity at saturated vaport pressure. - SpecificHeatCapacityAtSaturatedVaporPressure - SpecificHeatCapacityAtSaturatedVaporPressure - https://qudt.org/vocab/quantitykind/SpecificHeatCapacityAtSaturation - https://www.wikidata.org/wiki/Q75775005 - 5-16.4 - Specific heat capacity at saturated vaport pressure. + AmountPerMassTimeUnit + AmountPerMassTimeUnit - + - + - - + - Heat capacity divided by mass. - SpecificHeatCapacity - SpecificHeatCapacity - https://qudt.org/vocab/quantitykind/SpecificHeatCapacity - https://www.wikidata.org/wiki/Q487756 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-48 - https://dbpedia.org/page/Specific_heat_capacity - 5-16.1 - Heat capacity divided by mass. - https://en.wikipedia.org/wiki/Specific_heat_capacity - https://doi.org/10.1351/goldbook.S05800 + Derivative of velocity with respect to time. + Acceleration + Acceleration + http://qudt.org/vocab/quantitykind/Acceleration + 3-9.1 + https://doi.org/10.1351/goldbook.A00051 - - + + - + - Product of mass and velocity. - Momentum - Momentum - http://qudt.org/vocab/quantitykind/Momentum - 4-8 - https://doi.org/10.1351/goldbook.M04007 + Vector field quantity E which exerts on any charged particle at rest a force F equal to the product of E and the electric charge Q of the particle. + ElectricFieldStrength + ElectricFieldStrength + https://qudt.org/vocab/quantitykind/ElectricFieldStrength + https://www.wikidata.org/wiki/Q20989 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-18 + 6-10 + Vector field quantity E which exerts on any charged particle at rest a force F equal to the product of E and the electric charge Q of the particle. - + + + + + ThermalDiffusionRatio + ThermalDiffusionRatio + https://qudt.org/vocab/quantitykind/ThermalDiffusionRatio + https://www.wikidata.org/wiki/Q96249433 + 9-40.1 + + + - T-1 L0 M0 I0 Θ-1 N0 J0 + T-1 L+2 M0 I0 Θ0 N0 J0 - PerTemperatureTimeUnit - PerTemperatureTimeUnit - - - - - - Describes what is needed to repeat the experiment - AccessConditions - AccessConditions - Describes what is needed to repeat the experiment - In case of national or international facilities such as synchrotrons describe the programme that enabled you to access these. Was the access to your characterisation tool an inhouse routine or required a 3rd party service? Was the access to your sample preparation an inhouse routine or required a 3rd party service? + AreaPerTimeUnit + AreaPerTimeUnit - - - + + - Frequency by which the nucleus angular momentum vector precesses about the axis of an external magnetic field. - NuclearPrecessionAngularFrequency - NuclearPrecessionAngularFrequency - https://www.wikidata.org/wiki/Q97641779 - 10-15.3 - Frequency by which the nucleus angular momentum vector precesses about the axis of an external magnetic field. - - - - - - A quantum annihilation is a fundamental causal system that is expressed as a complete bipartite directed graph K(m,1). - QuantumAnnihilation - QuantumAnnihilation - A quantum annihilation is a fundamental causal system that is expressed as a complete bipartite directed graph K(m,1). + Voltage between the two terminals of a voltage source when there is no electric current through the source. + SourceVoltage + SourceTension + SourceVoltage + https://qudt.org/vocab/quantitykind/SourceVoltage + https://www.wikidata.org/wiki/Q185329 + 6-36 + Voltage between the two terminals of a voltage source when there is no electric current through the source. - - - - A causal collapse is a fundamental interaction that is expressed as a complete bipartite directed graph K(m,n), when m>n. - CausalCollapse - CausalCollapse - A causal collapse is a fundamental interaction that is expressed as a complete bipartite directed graph K(m,n), when m>n. + + + + Electronic device capable of processing data, typically in binary form, according to instructions given to it in a variable program. + ComputerSystem + Computer + ComputerSystem + Electronic device capable of processing data, typically in binary form, according to instructions given to it in a variable program. + https://en.wikipedia.org/wiki/Computer - - - - chronopotentiometry where the change in applied current undergoes a cyclic current reversal - - CyclicChronopotentiometry - CyclicChronopotentiometry - chronopotentiometry where the change in applied current undergoes a cyclic current reversal + + + + + Free forming is pressure forming with tools that do not or only partially contain the shape of the workpiece and move against each other (from: DIN 8583 Part 3/05.70). + Moulding + Gesenkformen + Moulding - - + + + + + + - - T+2 L-2 M-1 I+2 Θ0 N0 J0 + + - - + - MagneticReluctanceUnit - MagneticReluctanceUnit + Physical quantity of dimension energy × time. + Action + Action + https://qudt.org/vocab/quantitykind/Action + https://www.wikidata.org/wiki/Q846785 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-51 + 4-32 + Physical quantity of dimension energy × time. - - + + - SparkPlasmaSintering - SparkPlasmaSintering + GravityCasting + GravityCasting + + + + + + A system which is mainly characterised by the spatial configuration of its elements. + HolisticArrangement + HolisticArrangement + A system which is mainly characterised by the spatial configuration of its elements. + + + + + + Shot peening is shot peening for shaping or straightening workpieces by introducing residual compressive stresses (from: DIN 8200/10.82). + FormingBlasting + Umformstrahlen + FormingBlasting - + - T+4 L0 M-1 I+2 Θ0 N0 J0 + T-2 L+3 M+1 I0 Θ0 N-1 J0 - SquareCurrentQuarticTimePerMassUnit - SquareCurrentQuarticTimePerMassUnit + EnergyLengthPerAmountUnit + EnergyLengthPerAmountUnit - - - - - T-2 L+1 M+1 I-1 Θ0 N0 J0 - - - + + - MagneticPotentialUnit - MagneticPotentialUnit + Atomic quantum number related to the orbital angular momentum l of a one-electron state. + OrbitalAngularMomentumQuantumNumber + OrbitalAngularMomentumQuantumNumber + https://qudt.org/vocab/quantitykind/OrbitalAngularMomentumQuantumNumber + https://www.wikidata.org/wiki/Q1916324 + 10-13.3 + Atomic quantum number related to the orbital angular momentum l of a one-electron state. - - + + + + A computational application that uses existing data to predict the behaviour of a system without providing a identifiable analogy with the original object. + DataBasedSimulationSoftware + DataBasedSimulationSoftware + A computational application that uses existing data to predict the behaviour of a system without providing a identifiable analogy with the original object. + + + + + + A construction language used to write configuration files. + ConfigurationLanguage + ConfigurationLanguage + A construction language used to write configuration files. + .ini files + Files in the standard .config directory on Unix systems. + https://en.wikipedia.org/wiki/Configuration_file#Configuration_languages + + + + + + + + - - T+3 L-2 M-1 I+2 Θ0 N0 J0 + + - - - - ElectricConductanceUnit - ElectricConductanceUnit + + + An objective comparative measure of hot or cold. + +Temperature is a relative quantity that can be used to express temperature differences. Unlike ThermodynamicTemperature, it cannot express absolute temperatures. + CelsiusTemperature + CelsiusTemperature + http://qudt.org/vocab/quantitykind/CelciusTemperature + 5-2 + An objective comparative measure of hot or cold. + +Temperature is a relative quantity that can be used to express temperature differences. Unlike ThermodynamicTemperature, it cannot express absolute temperatures. + https://doi.org/10.1351/goldbook.T06261 - - + + + - Sum of all cross sections corresponding to the various reactions or processes between an incident particle of specified type and energy and a target entity. - TotalCrossSection - TotalCrossSection - https://qudt.org/vocab/quantitykind/TotalCrossSection - https://www.wikidata.org/wiki/Q98206553 - 10-38.2 - Sum of all cross sections corresponding to the various reactions or processes between an incident particle of specified type and energy and a target entity. + Ratio of transverse strain to axial strain. + PoissonNumber + PoissonsRatio + PoissonNumber + https://www.wikidata.org/wiki/Q190453 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-61 + 4-18 + Ratio of transverse strain to axial strain. - - - - Nuclear magnetic resonance spectroscopy, most commonly known as NMR spectroscopy or magnetic resonance spectroscopy (MRS), is a spectroscopic technique to observe local magnetic fields around atomic nuclei. This spectroscopy is based on the measurement of absorption of electromagnetic radiations in the radio frequency region from roughly 4 to 900 MHz. Absorption of radio waves in the presence of magnetic field is accompanied by a special type of nuclear transition, and for this reason, such type of spectroscopy is known as Nuclear Magnetic Resonance Spectroscopy. The sample is placed in a magnetic field and the NMR signal is produced by excitation of the nuclei sample with radio waves into nuclear magnetic resonance, which is detected with sensitive radio receivers. The intramolecular magnetic field around an atom in a molecule changes the resonance frequency, thus giving access to details of the electronic structure of a molecule and its individual functional groups. As the fields are unique or highly characteristic to individual compounds, in modern organic chemistry practice, NMR spectroscopy is the definitive method to identify monomolecular organic compounds. - - NuclearMagneticResonance - Magnetic resonance spectroscopy (MRS) - NMR - NuclearMagneticResonance - Nuclear magnetic resonance spectroscopy, most commonly known as NMR spectroscopy or magnetic resonance spectroscopy (MRS), is a spectroscopic technique to observe local magnetic fields around atomic nuclei. This spectroscopy is based on the measurement of absorption of electromagnetic radiations in the radio frequency region from roughly 4 to 900 MHz. Absorption of radio waves in the presence of magnetic field is accompanied by a special type of nuclear transition, and for this reason, such type of spectroscopy is known as Nuclear Magnetic Resonance Spectroscopy. The sample is placed in a magnetic field and the NMR signal is produced by excitation of the nuclei sample with radio waves into nuclear magnetic resonance, which is detected with sensitive radio receivers. The intramolecular magnetic field around an atom in a molecule changes the resonance frequency, thus giving access to details of the electronic structure of a molecule and its individual functional groups. As the fields are unique or highly characteristic to individual compounds, in modern organic chemistry practice, NMR spectroscopy is the definitive method to identify monomolecular organic compounds. + + + + Presses + Presses - + - LSV corresponds to the first half cycle of cyclic voltammetry. - The peak current is expressed by the Randles-Ševčík equation. - The scan is usually started at a potential where no electrode reaction occurs. - Voltammetry in which the current is recorded as the electrode potential is varied linearly with time. + The resulting alternating current is plotted versus imposed DC potential. The obtained AC voltammogram is peak-shaped. + voltammetry in which a sinusoidal alternating potential of small amplitude (10 to 50 mV) of constant frequency (10 Hz to 100 kHz) is superimposed on a slowly and linearly varying potential ramp - LinearScanVoltammetry - LSV - LinearPolarization - LinearSweepVoltammetry - LinearScanVoltammetry - https://www.wikidata.org/wiki/Q620700 - Voltammetry in which the current is recorded as the electrode potential is varied linearly with time. - https://en.wikipedia.org/wiki/Linear_sweep_voltammetry + ACVoltammetry + ACV + ACVoltammetry + https://www.wikidata.org/wiki/Q120895154 + voltammetry in which a sinusoidal alternating potential of small amplitude (10 to 50 mV) of constant frequency (10 Hz to 100 kHz) is superimposed on a slowly and linearly varying potential ramp https://doi.org/10.1515/pac-2018-0109 - - - - - T-2 L+1 M0 I0 Θ0 N0 J0 - - - - - AccelerationUnit - AccelerationUnit + + + + + The characterisation property is the investigate property or behaviour of a sample. It is derived from the secondary data, usually after classification or quantification (manually or by a model). + CharacterisationProperty + CharacterisationProperty + The characterisation property is the investigate property or behaviour of a sample. It is derived from the secondary data, usually after classification or quantification (manually or by a model). - - - - The pulsed electroacoustic (PEA) method is an established method for space charge measurements in polymeric dielectrics. - - PulsedElectroacousticMethod - PulsedElectroacousticMethod - The pulsed electroacoustic (PEA) method is an established method for space charge measurements in polymeric dielectrics. - https://doi.org/10.1007/s10832-023-00332-y + + + + + + Dimensionless multiplicative unit prefix. + MetricPrefix + https://en.wikipedia.org/wiki/Metric_prefix + MetricPrefix + Dimensionless multiplicative unit prefix. - - + + - Quotient of the number of internal conversion electrons and the number of gamma quanta emitted by the radioactive atom in a given transition, where a conversion electron represents an orbital electron emitted through the radioactive decay. - InternalConversionFactor - InternalConversionCoefficient - InternalConversionFactor - https://qudt.org/vocab/quantitykind/InternalConversionFactor - https://www.wikidata.org/wiki/Q6047819 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-02-57 - 10-35 - Quotient of the number of internal conversion electrons and the number of gamma quanta emitted by the radioactive atom in a given transition, where a conversion electron represents an orbital electron emitted through the radioactive decay. + Under periodic conditions, ratio of the absolute value of the active power P to the apparent power S. + PowerFactor + PowerFactor + https://qudt.org/vocab/quantitykind/PowerFactor + https://www.wikidata.org/wiki/Q750454 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-11-46 + 6-58 + Under periodic conditions, ratio of the absolute value of the active power P to the apparent power S. - - - - Type of scratching behaviour where the scratching force and the (displacement) deflection of the scratching tip are constant over the scratching distance during the test. - Planing - Hobeln - Planing + + + + + Square root of the migration area, M^2. + MigrationLength + MigrationLength + https://qudt.org/vocab/quantitykind/MigrationLength + https://www.wikidata.org/wiki/Q98998318 + 10-73.3 + Square root of the migration area, M^2. - - - + + + - GreenStrangeAntiQuark - GreenStrangeAntiQuark + A neutrino belonging to the third generation of leptons. + TauNeutrino + TauNeutrino + A neutrino belonging to the third generation of leptons. + https://en.wikipedia.org/wiki/Tau_neutrino - - - - A Material occurring in nature, without the need of human intervention. - NaturalMaterial - NaturalMaterial - A Material occurring in nature, without the need of human intervention. + + + + Method of mechanical testing that provides values for the modulus of elasticity in bending, flexural stress, flexural strain, and the flexural stress–strain response of a material sample + + ThreePointBendingTesting + ThreePointFlexuralTest + ThreePointBendingTesting + https://www.wikidata.org/wiki/Q2300905 + Method of mechanical testing that provides values for the modulus of elasticity in bending, flexural stress, flexural strain, and the flexural stress–strain response of a material sample + https://en.wikipedia.org/wiki/Three-point_flexural_test - - - - - T+1 L+2 M0 I+1 Θ0 N0 J0 - - - + + + - ElectricChargeAreaUnit - ElectricChargeAreaUnit + Resistance quantum. + The von Klitzing constant is defined as Planck constant divided by the square of the elementary charge. + VonKlitzingConstant + VonKlitzingConstant + http://qudt.org/vocab/constant/VonKlitzingConstant + The von Klitzing constant is defined as Planck constant divided by the square of the elementary charge. - - - - - BlueUpAntiQuark - BlueUpAntiQuark + + + + Gas Adsorption Porosimetry is a method used for analyzing the surface area and porosity of materials. In this method, a gas, typically nitrogen or argon, is adsorbed onto the surface of the material at various pressures and temperatures. + + GasAdsorptionPorosimetry + GasAdsorptionPorosimetry + GasAdsorptionPorosimetry + Gas Adsorption Porosimetry is a method used for analyzing the surface area and porosity of materials. In this method, a gas, typically nitrogen or argon, is adsorbed onto the surface of the material at various pressures and temperatures. - - + + + - + - - + + + + + + + - - Physical constants are categorised into "exact" and measured constants. - -With "exact" constants, we refer to physical constants that have an exact numerical value after the revision of the SI system that was enforsed May 2019. - PhysicalConstant - PhysicalConstant - Physical constants are categorised into "exact" and measured constants. + + StrangeQuark + StrangeQuark + https://en.wikipedia.org/wiki/Strange_quark + -With "exact" constants, we refer to physical constants that have an exact numerical value after the revision of the SI system that was enforsed May 2019. - https://en.wikipedia.org/wiki/List_of_physical_constants + + + + BlowMolding + BlowMolding - - - - - GreenDownAntiQuark - GreenDownAntiQuark + + + + For a sinusoidal wave at a given point, velocity in the direction of propagation of the wavefront corresponding to a specified phase. + PhaseVelocity + PhaseSpeed + PhaseVelocity + https://www.wikidata.org/wiki/Q13824 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-10-13 + https://dbpedia.org/page/Phase_velocity + 3-23.1 + For a sinusoidal wave at a given point, velocity in the direction of propagation of the wavefront corresponding to a specified phase. + https://en.wikipedia.org/wiki/Phase_velocity - - - - IsothermalConversion - IsothermalConversion + + + + Unit for quantities of dimension one that are the fraction of two areas. + AreaFractionUnit + AreaFractionUnit + Unit for quantities of dimension one that are the fraction of two areas. + Unit for solid angle. - - + + - Description of performed statistical analysis to check for data reproducibility (e.g. easily reproducible for everyone, reproducible for a domain expert, reproducible only for Data processing Expert) - - ProcessingReproducibility - ProcessingReproducibility - Description of performed statistical analysis to check for data reproducibility (e.g. easily reproducible for everyone, reproducible for a domain expert, reproducible only for Data processing Expert) + Electrochemical measurement principle based on the measurement of the dielectric constant of a sample resulting from the orientation of particles (molecules or ions) that have a dipole moment in an electric field. Dielectrometric titrations use dielectrometry for the end-point detection. The method is used to monitor the purity of dielectrics, for example to detect small amounts of moisture. + Dielectrometry + Dielectrometry + Electrochemical measurement principle based on the measurement of the dielectric constant of a sample resulting from the orientation of particles (molecules or ions) that have a dipole moment in an electric field. Dielectrometric titrations use dielectrometry for the end-point detection. The method is used to monitor the purity of dielectrics, for example to detect small amounts of moisture. + https://doi.org/10.1515/pac-2018-0109 - - - - - T+2 L+2 M0 I0 Θ0 N0 J0 - - - + + + + HandlingDevice + HandlingDevice + + + + + - AreaSquareTimeUnit - AreaSquareTimeUnit + Natural logarithm of the quotient of a reference energy and the kinetic energy of a neutron. + Lethargy + Lethargy + https://qudt.org/vocab/quantitykind/Lethargy + https://www.wikidata.org/wiki/Q25508781 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-07-01 + 10-69 + Natural logarithm of the quotient of a reference energy and the kinetic energy of a neutron. - - - + + + + + + + + + + + + + + + + + + - RedBottomAntiQuark - RedBottomAntiQuark + DownQuarkType + DownQuarkType - + - T-2 L+1 M+1 I-2 Θ0 N0 J0 + T+1 L-1 M0 I+1 Θ0 N0 J0 - - PermeabilityUnit - PermeabilityUnit - - - - - - A meson with total spin 1 and even parit. - PseudovectorMeson - PseudovectorMeson - A meson with total spin 1 and even parit. - https://en.wikipedia.org/wiki/Pseudovector_meson - - - - - - Unit for quantities of dimension one that are the fraction of two pressures. - PressureFractionUnit - PressureFractionUnit - Unit for quantities of dimension one that are the fraction of two pressures. - - - - - - - - - - - - - - Magnetic tension divided by magnetic flux. - MagneticReluctance - Reluctance - MagneticReluctance - https://qudt.org/vocab/quantitykind/Reluctance - https://www.wikidata.org/wiki/Q863390 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-28 - 6-39 - Magnetic tension divided by magnetic flux. - - - - - - A physics-based model based on a physics equation describing the behaviour of mesoscopic entities, i.e. a set of bounded atoms like a molecule, bead or nanoparticle. - MesoscopicModel - MesoscopicModel - A physics-based model based on a physics equation describing the behaviour of mesoscopic entities, i.e. a set of bounded atoms like a molecule, bead or nanoparticle. + ElectricChargePerLengthUnit + ElectricChargePerLengthUnit - - - + + + - Ratio of the mass of water vapour to the mass of dry air in a given volume of air. - The mixing ratio at saturation is denoted xsat. - MixingRatio - MassRatioOfWaterVapourToDryGas - MixingRatio - https://www.wikidata.org/wiki/Q76378940 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-62 - 5-30 - Ratio of the mass of water vapour to the mass of dry air in a given volume of air. - - - - - - A peak-shaped anodic stripping voltammogram is obtained. Peak current depends on time of accumulation, mass transport of analyte (stirring), scan rate and mode (linear or pulse), and analyte concentration in solution. - A solid electrode, carbon paste or composite electrode, bismuth film electrode, mercury film electrode, or static mercury drop electrode may be used. - Stripping voltammetry in which material accumulated at the working electrode is electrochemically oxi- dized in the stripping step. - - AnodicStrippingVoltammetry - AnodicStrippingVoltammetry - https://www.wikidata.org/wiki/Q939328 - Stripping voltammetry in which material accumulated at the working electrode is electrochemically oxi- dized in the stripping step. - https://doi.org/10.1515/pac-2018-0109 + Vector whose scalar products with all fundamental lattice vectors are integral multiples of 2pi. + AngularReciprocalLatticeVector + AngularReciprocalLatticeVector + https://qudt.org/vocab/quantitykind/AngularReciprocalLatticeVector + https://www.wikidata.org/wiki/Q105475278 + 12-2.1 + Vector whose scalar products with all fundamental lattice vectors are integral multiples of 2pi. - - - + + + - LatentHeat - LatentHeat - https://www.wikidata.org/wiki/Q207721 - 5-6.2 + The speed of light in vacuum. Defines the base unit metre in the SI system. + SpeedOfLightInVacuum + SpeedOfLightInVacuum + http://qudt.org/vocab/constant/SpeedOfLight_Vacuum + 6-35.2 + The speed of light in vacuum. Defines the base unit metre in the SI system. + https://doi.org/10.1351/goldbook.S05854 - - + + - Heat is energy in transfer to or from a thermodynamic system, by mechanisms other than thermodynamic work or transfer of matter. - Heat - AmountOfHeat - Heat - http://qudt.org/vocab/quantitykind/Heat - 5-6.1 - https://doi.org/10.1351/goldbook.H02752 + Ratio of area on a sphere to its radius squared. + SolidAngle + SolidAngle + http://qudt.org/vocab/quantitykind/SolidAngle + 3-6 + Ratio of area on a sphere to its radius squared. + https://doi.org/10.1351/goldbook.S05732 - - - + + - + - Increase in the rate of reaction of a specified chemical reaction that an enzyme produces in a specific assay system. - CatalyticActivity - CatalyticActivity - http://qudt.org/vocab/quantitykind/CatalyticActivity - Increase in the rate of reaction of a specified chemical reaction that an enzyme produces in a specific assay system. - https://doi.org/10.1351/goldbook.C00881 + The measure of the resistance of a fluid to flow when an external force is applied. + DynamicViscosity + Viscosity + DynamicViscosity + https://qudt.org/vocab/quantitykind/DynamicViscosity + https://www.wikidata.org/wiki/Q15152757 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-34 + 4-24 + The measure of the resistance of a fluid to flow when an external force is applied. + https://doi.org/10.1351/goldbook.D01877 - - - - A quantity that is the result of a well-defined measurement procedure. - The specification of a measurand requires knowledge of the kind of quantity, description of the state of the phenomenon, body, or substance carrying the quantity, including any relevant component, and the chemical entities involved. - --- VIM - MeasuredProperty - MeasuredProperty - A quantity that is the result of a well-defined measurement procedure. + + + + + Average value of the increment of the lethargy per collision. + AverageLogarithmicEnergyDecrement + AverageLogarithmicEnergyDecrement + https://qudt.org/vocab/quantitykind/AverageLogarithmicEnergyDecrement.html + https://www.wikidata.org/wiki/Q1940739 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-07-02 + 10-70 + Average value of the increment of the lethargy per collision. - - - - - T-1 L+2 M+1 I0 Θ0 N-1 J0 - - - + + + - EnergyTimePerAmountUnit - EnergyTimePerAmountUnit + angular wavenumber of electrons in states on the Fermi sphere + FermiAnglularWaveNumber + FermiAnglularRepetency + FermiAnglularWaveNumber + https://qudt.org/vocab/quantitykind/FermiAngularWavenumber + https://www.wikidata.org/wiki/Q105554303 + 12-9.2 + angular wavenumber of electrons in states on the Fermi sphere - - + + + - Length of the repetition interval of a wave. - Wavelength - Wavelength - https://qudt.org/vocab/quantitykind/Wavelength - https://www.wikidata.org/wiki/Q41364 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-10-10 - https://dbpedia.org/page/Wavelength - 3-19 - Length of the repetition interval of a wave. - https://en.wikipedia.org/wiki/Wavelength - https://doi.org/10.1351/goldbook.W06659 + Magnitude of the wave vector. + AngularWavenumber + AngularRepetency + AngularWavenumber + https://qudt.org/vocab/quantitykind/AngularWavenumber + https://www.wikidata.org/wiki/Q30338487 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-10-12 + 3-22 + Magnitude of the wave vector. - - + + + + - - + + - - A set of one or more 'MeasuringInstruments' and often other devices, including any reagent and supply, assembled and adapted to give information used to generate 'MeasuredQuantityProperty' within specified intervals for quantities of specified kinds. - --- VIM - MeasuringSystem - MeasuringSystem - A set of one or more 'MeasuringInstruments' and often other devices, including any reagent and supply, assembled and adapted to give information used to generate 'MeasuredQuantityProperty' within specified intervals for quantities of specified kinds. - --- VIM - measuring system - - - - - Inverse of the time constant of an exponentially varying quantity. - DampingCoefficient - DampingCoefficient - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-05-24 - 3-24 - Inverse of the time constant of an exponentially varying quantity. - - - - - - - A fluid in which a gas is ionized to a level where its electrical conductivity allows long-range electric and magnetic fields to dominate its behaviour. - Plasma - Plasma - A fluid in which a gas is ionized to a level where its electrical conductivity allows long-range electric and magnetic fields to dominate its behaviour. + Electric field strength multiplied by magnetic field strength. + PoyntingVector + PoyntingVector + https://qudt.org/vocab/quantitykind/PoyntingVector + https://www.wikidata.org/wiki/Q504186 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-66 + 6-34 + Electric field strength multiplied by magnetic field strength. - - + + - Quotient of the magnetic dipole moment of an atom, and the product of the total angular momentum quantum number and the Bohr magneton. - LandeFactor - GFactorOfAtom - LandeFactor - https://qudt.org/vocab/quantitykind/LandeGFactor - https://www.wikidata.org/wiki/Q1191684 - 10-14.1 - Quotient of the magnetic dipole moment of an atom, and the product of the total angular momentum quantum number and the Bohr magneton. + Real part of the impedance. + ResistanceToAlternativeCurrent + ResistanceToAlternativeCurrent + https://www.wikidata.org/wiki/Q1048490 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-45 + 6-51.2 + Real part of the impedance. - - - + + + - Relation between observed magnetic moment of a particle and the related unit of magnetic moment. - GFactor - GFactor - https://www.wikidata.org/wiki/Q1951266 - Relation between observed magnetic moment of a particle and the related unit of magnetic moment. + Quantity characterizing the variation with thermodynamic temperature T of the volume V of a body, under given conditions. + alpha_V = (1/V) * (dV/dT) + CubicExpansionCoefficient + CubicExpansionCoefficient + https://qudt.org/vocab/quantitykind/CubicExpansionCoefficient + https://www.wikidata.org/wiki/Q74761076 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-28 + 5-3.2 + Quantity characterizing the variation with thermodynamic temperature T of the volume V of a body, under given conditions. - - - + + - + - z component of the diagonalized tensor of nuclear quadrupole moment, in the quantum state with the nuclear spin in the field direction (z). - NuclearQuadrupoleMoment - NuclearQuadrupoleMoment - https://qudt.org/vocab/quantitykind/NuclearQuadrupoleMoment - https://www.wikidata.org/wiki/Q97921226 - 10-18 - z component of the diagonalized tensor of nuclear quadrupole moment, in the quantum state with the nuclear spin in the field direction (z). - - - - - - - T-1 L+1 M+1 I0 Θ0 N0 J0 - - - - - MomentumUnit - MomentumUnit + Material property which describes how the size of an object changes with a change in temperature. + CoefficientOfThermalExpansion + ThermalExpansionCoefficient + CoefficientOfThermalExpansion + https://www.wikidata.org/wiki/Q45760 + Material property which describes how the size of an object changes with a change in temperature. - - - - - T0 L-1 M0 I0 Θ-1 N0 J0 - - - + + - PerLengthTemperatureUnit - PerLengthTemperatureUnit + Relative change of length per change of temperature. + LinearExpansionCoefficient + LinearExpansionCoefficient + https://qudt.org/vocab/quantitykind/LinearExpansionCoefficient + https://www.wikidata.org/wiki/Q74760821 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-27 + 5-3.1 + Relative change of length per change of temperature. - - - - A device that is designed to participate to a manufacturing process. - ManufacturingDevice - ManufacturingDevice - A device that is designed to participate to a manufacturing process. + + + + + Mass density ρ of a substance divided by the mass density ρ0 of a reference substance, under conditions that should be specified for both substances. + RelativeMassDensity + RelativeDensity + RelativeMassDensity + https://www.wikidata.org/wiki/Q11027905 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-08 + 4-4 + Mass density ρ of a substance divided by the mass density ρ0 of a reference substance, under conditions that should be specified for both substances. + https://doi.org/10.1351/goldbook.R05262 - - - - - Deals with undefined shapes both input and output. - The creation of a material entity starting from fundamental substances, involving chemical phenomena (e.g. reaction, bonding). - MaterialSynthesis - MaterialSynthesis - The creation of a material entity starting from fundamental substances, involving chemical phenomena (e.g. reaction, bonding). - Deals with undefined shapes both input and output. + + + + Titration in which the electric conductivity of a solution is measured as a function of the amount of titrant added. The equivalence-point is obtained as the intersection of linear parts of the conductance G, versus titrant volume V, curve. The method can be used for deeply coloured or turbid solutions. Acid-base and precipitation reactions are most frequently used. The method is based on replacing an ionic species of the analyte with another species, cor- responding to the titrant or the product with significantly different conductance. + ConductometricTitration + ConductometricTitration + https://www.wikidata.org/wiki/Q11778221 + Titration in which the electric conductivity of a solution is measured as a function of the amount of titrant added. The equivalence-point is obtained as the intersection of linear parts of the conductance G, versus titrant volume V, curve. The method can be used for deeply coloured or turbid solutions. Acid-base and precipitation reactions are most frequently used. The method is based on replacing an ionic species of the analyte with another species, cor- responding to the titrant or the product with significantly different conductance. + https://doi.org/10.1515/pac-2018-0109 - - - - ProductionEngineering - ProductionEngineering + + + + Measurement principle in which the electric conductivity of a solution is measured. The conductivity of a solution depends on the concentration and nature of ions present. + Conductometry + Conductometry + https://www.wikidata.org/wiki/Q901180 + Measurement principle in which the electric conductivity of a solution is measured. The conductivity of a solution depends on the concentration and nature of ions present. + Monitoring of the purity of deionized water. + https://en.wikipedia.org/wiki/Conductometry + https://doi.org/10.1515/pac-2018-0109 - - - - - T0 L+2 M-1 I0 Θ0 N0 J0 - - - - - AreaPerMassUnit - AreaPerMassUnit + + + + Dielectric spectroscopy (DS) or impedance spectroscopy, also known as electrochemical impedance spectroscopy, is frequently used to study the response of a sample subjected to an applied electric field of fixed or changing frequency. DS describes the dielectric properties of a material as a function of frequency. In DS, the radio and microwave frequency regions of the electromagnetic spectrum have been successfully made to interact with materials, so as to study the behavior of molecules. The interaction of applied alternating electric fields with dipoles possessing reorientation mobility in materials is also dealt by DS. + DielectricAndImpedanceSpectroscopy + DielectricAndImpedanceSpectroscopy + Dielectric spectroscopy (DS) or impedance spectroscopy, also known as electrochemical impedance spectroscopy, is frequently used to study the response of a sample subjected to an applied electric field of fixed or changing frequency. DS describes the dielectric properties of a material as a function of frequency. In DS, the radio and microwave frequency regions of the electromagnetic spectrum have been successfully made to interact with materials, so as to study the behavior of molecules. The interaction of applied alternating electric fields with dipoles possessing reorientation mobility in materials is also dealt by DS. - - - - Flanging - Flanging + + + + + CouplingFactor + InductiveCouplingFactor + CouplingFactor + https://www.wikidata.org/wiki/Q78101715 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-41 + 6-42.1 - - - - - - - - - - - + + + - Product of the mean linear range R and the mass density ρ of the material. - MeanMassRange - MeanMassRange - https://qudt.org/vocab/quantitykind/MeanMassRange - https://www.wikidata.org/wiki/Q98681670 - 10-57 - Product of the mean linear range R and the mass density ρ of the material. - https://doi.org/10.1351/goldbook.M03783 + Angular measure between the positive real axis and the radius of the polar representation of the complex number in the complex plane. + PhaseAngle + PhaseAngle + https://www.wikidata.org/wiki/Q415829 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-07-04 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=141-01-01 + 3-7 + Angular measure between the positive real axis and the radius of the polar representation of the complex number in the complex plane. - - - - Voltage phasor multiplied by complex conjugate of the current phasor. - ComplexPower - ComplexApparentPower - ComplexPower - https://qudt.org/vocab/quantitykind/ComplexPower - https://www.wikidata.org/wiki/Q65239736 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-11-39 - 6-59 - Voltage phasor multiplied by complex conjugate of the current phasor. + + + + Ion mobility spectrometry (IMS) It is a method of conducting analytical research that separates and identifies ionized molecules present in the gas phase based on the mobility of the molecules in a carrier buffer gas. Even though it is used extensively for military or security objectives, such as detecting drugs and explosives, the technology also has many applications in laboratory analysis, including studying small and big biomolecules. IMS instruments are extremely sensitive stand-alone devices, but are often coupled with mass spectrometry, gas chromatography or high-performance liquid chromatography in order to achieve a multi-dimensional separation. They come in various sizes, ranging from a few millimeters to several meters depending on the specific application, and are capable of operating under a broad range of conditions. IMS instruments such as microscale high-field asymmetric-waveform ion mobility spectrometry can be palm-portable for use in a range of applications including volatile organic compound (VOC) monitoring, biological sample analysis, medical diagnosis and food quality monitoring. + + IonMobilitySpectrometry + IMS + IonMobilitySpectrometry + Ion mobility spectrometry (IMS) It is a method of conducting analytical research that separates and identifies ionized molecules present in the gas phase based on the mobility of the molecules in a carrier buffer gas. Even though it is used extensively for military or security objectives, such as detecting drugs and explosives, the technology also has many applications in laboratory analysis, including studying small and big biomolecules. IMS instruments are extremely sensitive stand-alone devices, but are often coupled with mass spectrometry, gas chromatography or high-performance liquid chromatography in order to achieve a multi-dimensional separation. They come in various sizes, ranging from a few millimeters to several meters depending on the specific application, and are capable of operating under a broad range of conditions. IMS instruments such as microscale high-field asymmetric-waveform ion mobility spectrometry can be palm-portable for use in a range of applications including volatile organic compound (VOC) monitoring, biological sample analysis, medical diagnosis and food quality monitoring. - - - - - - - - - - A workflow whose steps (iterative steps) are the repetition of the same workflow type. - IterativeWorkflow - IterativeWorkflow - A workflow whose steps (iterative steps) are the repetition of the same workflow type. + + + + + A unit symbol that stands for a derived unit. + Special units are semiotic shortcuts to more complex composed symbolic objects. + SpecialUnit + SpecialUnit + A unit symbol that stands for a derived unit. + Pa stands for N/m2 +J stands for N m - - - - Helmholtz energy per unit mass. - SpecificHelmholtzEnergy - SpecificHelmholtzEnergy - https://qudt.org/vocab/quantitykind/SpecificHelmholtzEnergy - https://www.wikidata.org/wiki/Q76359554 - 5-21.4 - Helmholtz energy per unit mass. + + + + A measurement unit for a derived quantity. +-- VIM + Derived units are defined as products of powers of the base units corresponding to the relations defining the derived quantities in terms of the base quantities. + DerivedUnit + DerivedUnit + Derived units are defined as products of powers of the base units corresponding to the relations defining the derived quantities in terms of the base quantities. + derived unit + A measurement unit for a derived quantity. +-- VIM - + - T0 L0 M0 I+1 Θ0 N0 J0 + T-3 L+1 M+1 I-1 Θ0 N0 J0 - ElectricCurrentUnit - ElectricCurrentUnit + ElectricFieldStrengthUnit + ElectricFieldStrengthUnit - - + - - - - - - - - + - Quotient of the total linear stopping power S and the mass density ρ of the material. - TotalMassStoppingPower - MassStoppingPower - TotalMassStoppingPower - https://qudt.org/vocab/quantitykind/TotalMassStoppingPower - https://www.wikidata.org/wiki/Q98642795 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-12-52 - 10-55 - Quotient of the total linear stopping power S and the mass density ρ of the material. + Differential quotient of N with respect to time, where N is the number of particles being emitted from an infinitesimally small volume element in the time interval of duration dt, and dt. + ParticleEmissionRate + ParticleEmissionRate + https://www.wikidata.org/wiki/Q98153151 + 10-36 + Differential quotient of N with respect to time, where N is the number of particles being emitted from an infinitesimally small volume element in the time interval of duration dt, and dt. - - - + + - Proportionality constant between the particle current density J and the gradient of the particle number density n. - DiffusionCoefficientForParticleNumberDensity - DiffusionCoefficientForParticleNumberDensity - https://www.wikidata.org/wiki/Q98875545 - 10-64 - Proportionality constant between the particle current density J and the gradient of the particle number density n. + StaticFrictionCoefficient + CoefficientOfStaticFriction + StaticFrictionFactor + StaticFrictionCoefficient + https://www.wikidata.org/wiki/Q73695673 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-33 + 4-23.1 - + + + + + + + + + + + + + + A conventional that provides no possibility to infer the characteristics of the object to which it refers. + Uncoded + Uncoded + A conventional that provides no possibility to infer the characteristics of the object to which it refers. + A random generated id for a product. + + + + - + - - Proportionality constant in some physical laws. - DiffusionCoefficient - DiffusionCoefficient - Proportionality constant in some physical laws. + Partial differential quotient of the cross section of a process with respect to the solid angle around a given direction and the energy of a particle scattered in that direction. + DirectionAndEnergyDistributionOfCrossSection + DirectionAndEnergyDistributionOfCrossSection + https://qudt.org/vocab/quantitykind/SpectralAngularCrossSection + https://www.wikidata.org/wiki/Q98269571 + 10-41 + Partial differential quotient of the cross section of a process with respect to the solid angle around a given direction and the energy of a particle scattered in that direction. - + - T+3 L0 M-1 I+2 Θ0 N-1 J0 + T-1 L+2 M0 I0 Θ0 N-1 J0 - AmountConductivityUnit - AmountConductivityUnit + DiffusivityUnit + DiffusivityUnit - - - - - BlueBottomAntiQuark - BlueBottomAntiQuark + + + + + T0 L-1 M+1 I0 Θ0 N0 J0 + + + + + MassPerLengthUnit + MassPerLengthUnit - - - - A scripting language developed specifically for an application, so that it's usage and interpretation is limited in this context. - ApplicationSpecificScript - ApplicationSpecificScript - A scripting language developed specifically for an application, so that it's usage and interpretation is limited in this context. - Scripting file for the execution of modelling software such as LAMMPS, OpenFOAM, or for general purpose platforms such as MATLAB or Mathematica. + + + + + T-1 L+4 M0 I0 Θ0 N0 J0 + + + + + QuarticLengthPerTimeUnit + QuarticLengthPerTimeUnit - - - - A programming language that is executed through runtime interpretation. - ScriptingLanguage - ScriptingLanguage - A programming language that is executed through runtime interpretation. + + + + + RedCharmAntiQuark + RedCharmAntiQuark - - - - Sum of electric current and displacement current - TotalCurrent - TotalCurrent - https://qudt.org/vocab/quantitykind/TotalCurrent - https://www.wikidata.org/wiki/Q77679732 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-45 - 6-19.2 - Sum of electric current and displacement current + + + + + + EndTile + EndTile @@ -20200,3623 +19667,3913 @@ With "exact" constants, we refer to physical constants that have an exact numeri https://doi.org/10.1351/goldbook.G02629 - - - - - - EndTile - EndTile + + + + + A coarse dispersion of solid in a solid continuum phase. + SolidSolidSuspension + SolidSolidSuspension + A coarse dispersion of solid in a solid continuum phase. + Granite, sand, dried concrete. - - + + - Analysis, that allows one to calculate the final material property from the calibrated primary data. - DataPostProcessing - DataPostProcessing - Analysis, that allows one to calculate the final material property from the calibrated primary data. + Scanning Kelvin probe (SKP) and scanning Kelvin probe force microscopy (SKPFM) are probe techniques which permit mapping of topography and Volta potential distribution on electrode surfaces. It measures the surface electrical potential of a sample without requiring an actual physical contact. + + ScanningKelvinProbe + SKB + ScanningKelvinProbe + Scanning Kelvin probe (SKP) and scanning Kelvin probe force microscopy (SKPFM) are probe techniques which permit mapping of topography and Volta potential distribution on electrode surfaces. It measures the surface electrical potential of a sample without requiring an actual physical contact. - + + + + Machining with a circular cutting movement, usually associated with a multi-toothed tool, and with a feed movement perpendicular or oblique to the axis of rotation of the tool, to produce any workpiece surface. + Milling + Fräsen + Milling + + + + + + + ActivityOfSolute + RelativeActivityOfSolute + ActivityOfSolute + https://www.wikidata.org/wiki/Q89408862 + 9-24 + + + - T0 L-1 M0 I0 Θ0 N0 J0 + T0 L0 M0 I+1 Θ-1 N0 J0 - - ReciprocalLengthUnit - ReciprocalLengthUnit - - - - - - Scalar quantity or tensor quantity equal to the absolute permeability divided by the magnetic constant. - RelativePermeability - RelativePermeability - https://qudt.org/vocab/quantitykind/ElectromagneticPermeabilityRatio - https://www.wikidata.org/wiki/Q77785645 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-12-29 - 6-27 - Scalar quantity or tensor quantity equal to the absolute permeability divided by the magnetic constant. - https://doi.org/10.1351/goldbook.R05272 + ElectricCurrentPerTemperatureUnit + ElectricCurrentPerTemperatureUnit - - - - Method of joining metallic materials with the aid of a molten filler metal (solder), optionally with the use of flow agents - Soldering - Löten - Soldering + + + + The analytical composition of a saturated solution, expressed in terms of the proportion of a designated solute in a designated solvent, is the solubility of that solute. + The solubility may be expressed as a concentration, molality, mole fraction, mole ratio, etc. + Solubility + Solubility + https://www.wikidata.org/wiki/Q170731 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-01-15 + The analytical composition of a saturated solution, expressed in terms of the proportion of a designated solute in a designated solvent, is the solubility of that solute. + https://doi.org/10.1351/goldbook.S05740 - - + + + + + + + + + + + + + + + + + + + + + - Assigned - Assigned + A measurement always implies a causal interaction between the object and the observer. + A measurement is the process of experimentally obtaining one or more measurement results that can reasonably be attributed to a quantity. + An 'observation' that results in a quantitative comparison of a 'property' of an 'object' with a standard reference based on a well defined mesurement procedure. + Measurement + Measurement + An 'observation' that results in a quantitative comparison of a 'property' of an 'object' with a standard reference based on a well defined mesurement procedure. + measurement - - - - hardening of a workpiece caused by the precipitation of one or more compounds from a supersaturated solid solution - PrecipitationHardening - PrecipitationHardening - hardening of a workpiece caused by the precipitation of one or more compounds from a supersaturated solid solution + + + + Nanomaterials are Materials possessing, at minimum, one external dimension measuring 1-100nm + NanoMaterial + NanoMaterial + Nanomaterials are Materials possessing, at minimum, one external dimension measuring 1-100nm - - + + + + + - - + + - - The small, dense region at the centre of an atom consisting of protons and neutrons. - Nucleus - Nucleus - The small, dense region at the centre of an atom consisting of protons and neutrons. + + Mass increment per time. + MassChangeRate + MassChangeRate + https://www.wikidata.org/wiki/Q92020547 + 4-30.3 + Mass increment per time. + + + + + + + Difference between energy of an electron at rest at infinity and a certain energy level which is the energy of an electron in the interior of a substance. + IonizationEnergy + IonizationEnergy + https://qudt.org/vocab/quantitykind/IonizationEnergy + https://www.wikidata.org/wiki/Q483769 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-06-39 + 12-24.2 + Difference between energy of an electron at rest at infinity and a certain energy level which is the energy of an electron in the interior of a substance. + https://doi.org/10.1351/goldbook.I03199 - - - - Treatment carried out after hardening or case hardening consisting of cooling to a temperature below room temperature to complete the transformation of austenite to martensite - DeepFreezing - Cryogenic treatment, Deep-freeze - Tieftemperaturbehandeln - DeepFreezing - Treatment carried out after hardening or case hardening consisting of cooling to a temperature below room temperature to complete the transformation of austenite to martensite + + + + Scalar quantity equal to the flux of the displacement current density JD through a given directed surface S. + DisplacementCurrent + DisplacementCurrent + https://qudt.org/vocab/quantitykind/DisplacementCurrent + https://www.wikidata.org/wiki/Q853178 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-43 + 6-19.1 + Scalar quantity equal to the flux of the displacement current density JD through a given directed surface S. - - - - - - + + - - + + T0 L-2 M0 I+1 Θ-1 N0 J0 - + + - Absolute value of the magnetic moment of a nucleus. - NuclearMagneton - NuclearMagneton - https://www.wikidata.org/wiki/Q1166093 - 10-9.3 - Absolute value of the magnetic moment of a nucleus. - https://doi.org/10.1351/goldbook.N04236 + ElectricCurrentDensityPerTemperatureUnit + ElectricCurrentDensityPerTemperatureUnit - - - - Field emission scanning electron microscopy (FE-SEM) is an advanced technology used to capture the microstructure image of the materials. FE-SEM is typically performed in a high vacuum because gas molecules tend to disturb the electron beam and the emitted secondary and backscattered electrons used for imaging. - - FieldEmissionScanningElectronMicroscopy - FE-SEM - FieldEmissionScanningElectronMicroscopy - Field emission scanning electron microscopy (FE-SEM) is an advanced technology used to capture the microstructure image of the materials. FE-SEM is typically performed in a high vacuum because gas molecules tend to disturb the electron beam and the emitted secondary and backscattered electrons used for imaging. + + + + A network of objects that implements a production process through a series of interconnected elements. + ProductionSystem + ProductionSystem + A network of objects that implements a production process through a series of interconnected elements. - - - - TransientLiquidPhaseSintering - TransientLiquidPhaseSintering + + + + + A type of sol in the form of one solid dispersed in another continuous solid. + SolidSol + SolidSol + A type of sol in the form of one solid dispersed in another continuous solid. - + - T-1 L+4 M0 I0 Θ0 N0 J0 + T0 L-2 M0 I0 Θ0 N+1 J0 - QuarticLengthPerTimeUnit - QuarticLengthPerTimeUnit + AmountPerAreaUnit + AmountPerAreaUnit - - - + + + + + T0 L+1 M0 I0 Θ0 N0 J0 + + + - Decrease in magnitude of any kind of flux through a medium. - Attenuation - Extinction - Attenuation - 3-26.1 - Decrease in magnitude of any kind of flux through a medium. - https://en.wikipedia.org/wiki/Attenuation - https://doi.org/10.1351/goldbook.A00515 + LengthUnit + LengthUnit - - + + + - Inverse of the impendance. - Admittance - ComplexAdmittance - Admittance - https://qudt.org/vocab/quantitykind/Admittance - https://www.wikidata.org/wiki/Q214518 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-51 - https://dbpedia.org/page/Admittance - 6-52.1 - Inverse of the impendance. + In nuclear physics, the multiplication factor for an infinite medium. + InfiniteMultiplicationFactor + InfiniteMultiplicationFactor + https://qudt.org/vocab/quantitykind/InfiniteMultiplicationFactor + https://www.wikidata.org/wiki/Q99440487 + 10-78.2 + In nuclear physics, the multiplication factor for an infinite medium. - - - - - + + + + A system of independent elements that are assembled together to perform a function. + Assembled + Assembled + A system of independent elements that are assembled together to perform a function. + + + + - - + + T-2 L0 M+2 I0 Θ0 N0 J0 - - - The 'semiosis' process of interpreting a 'physical' and provide a complec sign, 'theory' that stands for it and explain it to another interpreter. - Theorisation - Theorization - Theorisation - The 'semiosis' process of interpreting a 'physical' and provide a complec sign, 'theory' that stands for it and explain it to another interpreter. + + + + SquareMassPerSquareTimeUnit + SquareMassPerSquareTimeUnit - + + + + The energy of an object due to its motion. + KineticEnergy + KineticEnergy + http://qudt.org/vocab/quantitykind/KineticEnergy + 4-28.2 + The energy of an object due to its motion. + https://doi.org/10.1351/goldbook.K03402 + + + - T0 L-2 M0 I+1 Θ-1 N0 J0 + T-1 L+1 M0 I0 Θ0 N0 J0 + + SpeedUnit + SpeedUnit + + + + + + A quantum annihilation is a fundamental causal system that is expressed as a complete bipartite directed graph K(m,1). + QuantumAnnihilation + QuantumAnnihilation + A quantum annihilation is a fundamental causal system that is expressed as a complete bipartite directed graph K(m,1). + + + + + - ElectricCurrentDensityPerTemperatureUnit - ElectricCurrentDensityPerTemperatureUnit + Helmholtz energy per amount of substance. + MolarHelmholtzEnergy + MolarHelmholtzEnergy + https://www.wikidata.org/wiki/Q88862986 + 9-6.3 + Helmholtz energy per amount of substance. - + + + + + IntermediateSample + IntermediateSample + + + - T0 L+1 M0 I0 Θ0 N-1 J0 + T-3 L+3 M+1 I-2 Θ0 N0 J0 - LengthPerAmountUnit - LengthPerAmountUnit + ElectricResistivityUnit + ElectricResistivityUnit + + + + + + + In condensed matter physics, position vector of an atom or ion relative to its equilibrium position. + DisplacementVector + DisplacementVector + https://qudt.org/vocab/quantitykind/DisplacementVectorOfIon + https://www.wikidata.org/wiki/Q105533558 + 12-7.3 + In condensed matter physics, position vector of an atom or ion relative to its equilibrium position. + + + + + + + Efficiency of an ideal heat engine operating according to the Carnot process. + MaximumEfficiency + CarnotEfficiency + MaximumEfficiency + https://www.wikidata.org/wiki/Q93949862 + 5-25.2 + Efficiency of an ideal heat engine operating according to the Carnot process. + + + + + + Nanoindentation (known also as nanoindentation test) is a method for testing the hardness and related mechanical properties of materials, facilitated by high-precision instrumentation in the nanometer scale, as well as analytical and computational algorithms for result evaluation. + + Nanoindentation + Nanoindentation + Nanoindentation (known also as nanoindentation test) is a method for testing the hardness and related mechanical properties of materials, facilitated by high-precision instrumentation in the nanometer scale, as well as analytical and computational algorithms for result evaluation. + By definition, when someone performs nanoindentation, it refers to either quasistatic or continuous stiffness measurement. However, in reality with a nanoindenter it is also possible to perform scratch testing, scanning probe microscopy, and apply non-contact surface energy mapping, which can also be called nanoindentation, because they are measurements conducted using an nanoindenter. - + - T+1 L-2 M0 I0 Θ0 N0 J+1 + T-3 L-1 M+1 I0 Θ+1 N0 J0 - IlluminanceTimeUnit - IlluminanceTimeUnit - - - - - - - BlueStrangeAntiQuark - BlueStrangeAntiQuark - - - - - - - Sum of the product of the proton number and the hydrogen atomic mass, and the neutron rest mass, minus the rest mass of the atom. - MassDefect - MassDefect - https://qudt.org/vocab/quantitykind/MassDefect - https://www.wikidata.org/wiki/Q26897126 - 10-21.2 - Sum of the product of the proton number and the hydrogen atomic mass, and the neutron rest mass, minus the rest mass of the atom. + TemperaturePressurePerTimeUnit + TemperaturePressurePerTimeUnit - - - - - The final step of a workflow. - There may be more than one end task, if they run in parallel leading to more than one output. - EndStep - EndStep - The final step of a workflow. - There may be more than one end task, if they run in parallel leading to more than one output. + + + + Dynamic light scattering (DLS) is a technique in physics that can be used to determine the size distribution profile of small particles in suspension or polymers in solution. In the scope of DLS, temporal fluctuations are usually analyzed using the intensity or photon auto-correlation function (also known as photon correlation spectroscopy - PCS or quasi-elastic light scattering - QELS). + + DynamicLightScattering + DLS + DynamicLightScattering + Dynamic light scattering (DLS) is a technique in physics that can be used to determine the size distribution profile of small particles in suspension or polymers in solution. In the scope of DLS, temporal fluctuations are usually analyzed using the intensity or photon auto-correlation function (also known as photon correlation spectroscopy - PCS or quasi-elastic light scattering - QELS). - - - - A supply chain is a system of organizations, people, activities, information, and resources involved in supplying a product or service to a consumer. - SupplyChain - SupplyChain - A supply chain is a system of organizations, people, activities, information, and resources involved in supplying a product or service to a consumer. + + + + + OpticalTesting + OpticalTesting - - - - CausallHairedSystem - CausallHairedSystem + + + + A quantity obtained from a well-defined modelling procedure. + ModelledProperty + ModelledProperty + A quantity obtained from a well-defined modelling procedure. - + - T+1 L-2 M0 I+1 Θ0 N0 J0 + T-3 L0 M+1 I0 Θ-1 N0 J0 - ElectricDisplacementFieldUnit - ElectricDisplacementFieldUnit + ThermalTransmittanceUnit + ThermalTransmittanceUnit - - - - - Square root of the slowing down area. - SlowingDownLength - SlowingDownLength - https://qudt.org/vocab/quantitykind/Slowing-DownLength - https://www.wikidata.org/wiki/Q98996963 - 10-73.1 - Square root of the slowing down area. + + + + A manufacturing in which it is formed a solid body with its shape from shapeless original material parts, whose cohesion is created during the process. + WorkpieceForming + ArchetypeForming + PrimitiveForming + WorkpieceForming - - + + + - + - Even though torque has the same physical dimension as energy, it is not of the same kind and can not be measured with energy units like joule or electron volt. - The effectiveness of a force to produce rotation about an axis, measured by the product of the force and the perpendicular distance from the line of action of the force to the axis. - Torque - Torque - http://qudt.org/vocab/quantitykind/Torque - 4-12.2 - The effectiveness of a force to produce rotation about an axis, measured by the product of the force and the perpendicular distance from the line of action of the force to the axis. - https://doi.org/10.1351/goldbook.T06400 + A measure of the wavelength-weighted power emitted by a light source in a particular direction per unit solid angle. It is based on the luminosity function, which is a standardized model of the sensitivity of the human eye. + LuminousIntensity + LuminousIntensity + http://qudt.org/vocab/quantitykind/LuminousIntensity + 7-14 + A measure of the wavelength-weighted power emitted by a light source in a particular direction per unit solid angle. It is based on the luminosity function, which is a standardized model of the sensitivity of the human eye. - - - - - T+1 L+2 M0 I0 Θ+1 N0 J0 - - - - - AreaTimeTemperatureUnit - AreaTimeTemperatureUnit + + + + Quantities categorised according to ISO 80000-7. + LightAndRadiationQuantity + LightAndRadiationQuantity + Quantities categorised according to ISO 80000-7. - - + + - + - Decays per unit time. - Radioactivity - RadioactiveActivity - Radioactivity - http://qudt.org/vocab/quantitykind/SpecificActivity - Decays per unit time. - https://doi.org/10.1351/goldbook.A00114 - - - - - - - number of nucleons in an atomic nucleus - NucleonNumber - MassNumber - NucleonNumber - https://qudt.org/vocab/quantitykind/NucleonNumber - https://www.wikidata.org/wiki/Q101395 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-05-32 - https://dbpedia.org/page/Mass_number - 10-1.3 - number of nucleons in an atomic nucleus - https://en.wikipedia.org/wiki/Mass_number - https://doi.org/10.1351/goldbook.M03726 + Quotient of the total linear stopping power S and the mass density ρ of the material. + TotalMassStoppingPower + MassStoppingPower + TotalMassStoppingPower + https://qudt.org/vocab/quantitykind/TotalMassStoppingPower + https://www.wikidata.org/wiki/Q98642795 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-12-52 + 10-55 + Quotient of the total linear stopping power S and the mass density ρ of the material. - - - - - T-3 L+4 M+1 I0 Θ0 N0 J0 - - - - - PowerAreaUnit - PowerAreaUnit + + + + Thermogravimetric analysis or thermal gravimetric analysis (TGA) is a method of thermal analysis in which the mass of a sample is measured over time as the temperature changes. This measurement provides information about physical phenomena, such as phase transitions, absorption, adsorption and desorption; as well as chemical phenomena including chemisorptions, thermal decomposition, and solid-gas reactions (e.g., oxidation or reduction). + + Thermogravimetry + TGA + Thermogravimetry + Thermogravimetric analysis or thermal gravimetric analysis (TGA) is a method of thermal analysis in which the mass of a sample is measured over time as the temperature changes. This measurement provides information about physical phenomena, such as phase transitions, absorption, adsorption and desorption; as well as chemical phenomena including chemisorptions, thermal decomposition, and solid-gas reactions (e.g., oxidation or reduction). - - + + - ReactionSintering - ISO 3252:2019 Powder metallurgy -reaction sintering: process wherein at least two constituents of a powder mixture react during sintering - ReactionSintering + Filling + Filling - - - - Raman spectroscopy (/ˈrɑːmən/) (named after physicist C. V. Raman) is a spectroscopic technique typically used to determine vibrational modes of molecules, although rotational and other low-frequency modes of systems may also be observed. Raman spectroscopy is commonly used in chemistry to provide a structural fingerprint by which molecules can be identified. + + + + ArithmeticEquation + ArithmeticEquation + 1 + 1 = 2 + -Raman spectroscopy relies upon inelastic scattering of photons, known as Raman scattering. A source of monochromatic light, usually from a laser in the visible, near infrared, or near ultraviolet range is used, although X-rays can also be used. The laser light interacts with molecular vibrations, phonons or other excitations in the system, resulting in the energy of the laser photons being shifted up or down. The shift in energy gives information about the vibrational modes in the system. Infrared spectroscopy typically yields similar yet complementary information. + + + + + Angle between the scattered ray and the lattice plane. + BraggAngle + BraggAngle + https://qudt.org/vocab/quantitykind/BraggAngle + https://www.wikidata.org/wiki/Q105488118 + 12-4 + Angle between the scattered ray and the lattice plane. + -Typically, a sample is illuminated with a laser beam. Electromagnetic radiation from the illuminated spot is collected with a lens and sent through a monochromator. Elastic scattered radiation at the wavelength corresponding to the laser line (Rayleigh scattering) is filtered out by either a notch filter, edge pass filter, or a band pass filter, while the rest of the collected light is dispersed onto a detector. + + + + electrochemical method that measures the voltage drop of a cell resulting from a square wave current load - RamanSpectroscopy - RamanSpectroscopy - Raman spectroscopy (/ˈrɑːmən/) (named after physicist C. V. Raman) is a spectroscopic technique typically used to determine vibrational modes of molecules, although rotational and other low-frequency modes of systems may also be observed. Raman spectroscopy is commonly used in chemistry to provide a structural fingerprint by which molecules can be identified. + HPPC + HybridPulsePowerCharacterisation + HybridPulsePowerCharacterization + HPPC + electrochemical method that measures the voltage drop of a cell resulting from a square wave current load + + + + + + A property that is associated to an object by convention, or assumption. + A quantitative property attributed by agreement to a quantity for a given purpose. + ConventionalProperty + ConventionalProperty + A quantitative property attributed by agreement to a quantity for a given purpose. + The thermal conductivity of a copper sample in my laboratory can be assumed to be the conductivity that appears in the vendor specification. This value has been obtained by measurement of a sample which is not the one I have in my laboratory. This conductivity value is then a conventional quantitiative property assigned to my sample through a semiotic process in which no actual measurement is done by my laboratory. -Raman spectroscopy relies upon inelastic scattering of photons, known as Raman scattering. A source of monochromatic light, usually from a laser in the visible, near infrared, or near ultraviolet range is used, although X-rays can also be used. The laser light interacts with molecular vibrations, phonons or other excitations in the system, resulting in the energy of the laser photons being shifted up or down. The shift in energy gives information about the vibrational modes in the system. Infrared spectroscopy typically yields similar yet complementary information. +If I don't believe the vendor, then I can measure the actual thermal conductivity. I then perform a measurement process that semiotically assign another value for the conductivity, which is a measured property, since is part of a measurement process. -Typically, a sample is illuminated with a laser beam. Electromagnetic radiation from the illuminated spot is collected with a lens and sent through a monochromator. Elastic scattered radiation at the wavelength corresponding to the laser line (Rayleigh scattering) is filtered out by either a notch filter, edge pass filter, or a band pass filter, while the rest of the collected light is dispersed onto a detector. +Then I have two different physical quantities that are properties thanks to two different semiotic processes. - - + + + + duration of one cycle of a periodic event + PeriodDuration + Period + PeriodDuration + https://qudt.org/vocab/quantitykind/Period + https://www.wikidata.org/wiki/Q2642727 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-06-01 + 3-14 + duration of one cycle of a periodic event + https://doi.org/10.1351/goldbook.P04493 + + + + + - - + + - A fundamental physical constant characterizing the strength of the electromagnetic interaction between elementary charged particles. - FineStructureConstant - FineStructureConstant - http://qudt.org/vocab/constant/FineStructureConstant - https://doi.org/10.1351/goldbook.F02389 + In condensed matter physics, position vector of an atom or ion in equilibrium. + EquilibriumPositionVector + EquilibriumPositionVector + https://qudt.org/vocab/quantitykind/EquilibriumPositionVectorOfIon + https://www.wikidata.org/wiki/Q105533477 + 12-7.2 + In condensed matter physics, position vector of an atom or ion in equilibrium. - - - - - Extrusion - Extrusion + + + + + + + + + + + + + + + + A composite physical object made of fermions (i.e. having mass and occupying space). + Substance + Substance + A composite physical object made of fermions (i.e. having mass and occupying space). - + + + + The class of physical objects possessing a structure that is larger than a single composite particle, for which its bosonic or fermionic nature is undetermined. + CompositePhysicalObject + CompositePhysicalObject + The class of physical objects possessing a structure that is larger than a single composite particle, for which its bosonic or fermionic nature is undetermined. + + + + + + Describes the main input parameters that are needed to acquire the signal + + MeasurementParameter + MeasurementParameter + Describes the main input parameters that are needed to acquire the signal + + + - T-2 L+3 M-1 I0 Θ0 N0 J0 + T0 L0 M+1 I0 Θ0 N0 J0 - - NewtonianConstantOfGravityUnit - NewtonianConstantOfGravityUnit - - - - - - Average value of the increment of the lethargy per collision. - AverageLogarithmicEnergyDecrement - AverageLogarithmicEnergyDecrement - https://qudt.org/vocab/quantitykind/AverageLogarithmicEnergyDecrement.html - https://www.wikidata.org/wiki/Q1940739 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-07-02 - 10-70 - Average value of the increment of the lethargy per collision. - - - - - - Alpha spectrometry (also known as alpha(-particle) spectroscopy) is the quantitative study of the energy of alpha particles emitted by a radioactive nuclide that is an alpha emitter. As emitted alpha particles are mono-energetic (i.e. not emitted with a spectrum of energies, such as beta decay) with energies often distinct to the decay they can be used to identify which radionuclide they originated from. - AlphaSpectrometry - AlphaSpectrometry - Alpha spectrometry (also known as alpha(-particle) spectroscopy) is the quantitative study of the energy of alpha particles emitted by a radioactive nuclide that is an alpha emitter. As emitted alpha particles are mono-energetic (i.e. not emitted with a spectrum of energies, such as beta decay) with energies often distinct to the decay they can be used to identify which radionuclide they originated from. + MassUnit + MassUnit - - - - - The rest mass of an electron. - ElectronMass - ElectronMass - http://qudt.org/vocab/constant/ElectronMass - https://doi.org/10.1351/goldbook.E02008 + + + + CompositeMaterial + CompositeMaterial - - - - - - - - - - - - - - Number of direct parts of a Reductionistic. - Using direct parthood EMMO creates a well-defined broadcasting between granularity levels. This also make it possible to count the direct parts of each granularity level. - NumberOfElements - NumberOfElements - Number of direct parts of a Reductionistic. + + + + Differential Pulse Voltammetry in which small potential pulses are superimposed onto a staircase potential ramp. + DifferentialStaircasePulseVoltammetry + DifferentialStaircasePulseVoltammetry + Differential Pulse Voltammetry in which small potential pulses are superimposed onto a staircase potential ramp. - - - + + + - Energy to be added to or removed from a system under constant temperature and pressure to undergo a complete phase transition. - LatentHeatOfPhaseTransition - LatentHeatOfPhaseTransition - https://www.wikidata.org/wiki/Q106553458 - 9-16 - Energy to be added to or removed from a system under constant temperature and pressure to undergo a complete phase transition. - - - - - - In the membrane osmometry technique, a pure solvent and polymer solution are separated by a semipermeable membrane, due to the higher chemical potential of the solvent in the pure solvent than in polymer solution, the solvent starts moving towards the polymer solution. - - MembraneOsmometry - MembraneOsmometry - In the membrane osmometry technique, a pure solvent and polymer solution are separated by a semipermeable membrane, due to the higher chemical potential of the solvent in the pure solvent than in polymer solution, the solvent starts moving towards the polymer solution. + For type II superconductors, the threshold magnetic flux density for magnetic flux entering the superconductor. + LowerCriticalMagneticFluxDensity + LowerCriticalMagneticFluxDensity + https://qudt.org/vocab/quantitykind/LowerCriticalMagneticFluxDensity + https://www.wikidata.org/wiki/Q106127355 + 12-36.2 + For type II superconductors, the threshold magnetic flux density for magnetic flux entering the superconductor. - - + + - Characteristic quantum number s of a particle, related to its spin. - SpinQuantumNumber - SpinQuantumNumber - https://qudt.org/vocab/quantitykind/SpinQuantumNumber - https://www.wikidata.org/wiki/Q3879445 - 10-13.5 - Characteristic quantum number s of a particle, related to its spin. + Sum of all cross sections corresponding to the various reactions or processes between an incident particle of specified type and energy and a target entity. + TotalCrossSection + TotalCrossSection + https://qudt.org/vocab/quantitykind/TotalCrossSection + https://www.wikidata.org/wiki/Q98206553 + 10-38.2 + Sum of all cross sections corresponding to the various reactions or processes between an incident particle of specified type and energy and a target entity. - - - - - T+2 L-2 M-1 I0 Θ0 N0 J0 - - - + + + - PerEnergyUnit - PerEnergyUnit + Expectation value of the energy imparted. + MeanEnergyImparted + MeanEnergyImparted + https://qudt.org/vocab/quantitykind/MeanEnergyImparted + https://www.wikidata.org/wiki/Q99526969 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-12-44 + 10-80.2 + Expectation value of the energy imparted. - - + + + + + + - - T-4 L0 M+1 I0 Θ0 N0 J0 + + - - + - MassPerQuarticTimeUnit - MassPerQuarticTimeUnit + At a point in a fluid, the product of mass density and velocity. + MassFlow + MassFlow + https://www.wikidata.org/wiki/Q3265048 + 4-30.1 + At a point in a fluid, the product of mass density and velocity. - - + + + - - T-1 L0 M+1 I0 Θ0 N0 J0 + + + + + + - - + - MassPerTimeUnit - MassPerTimeUnit + Number of nucleons in an atomic nucleus. + MassNumber + AtomicMassNumber + NucleonNumber + MassNumber + http://qudt.org/vocab/quantitykind/MassNumber + Number of nucleons in an atomic nucleus. - - + + + + + SerialStep + SerialStep + + + + - + - + - Measure of voltage induced by change of temperature. - SeebeckCoefficient - SeebeckCoefficient - https://qudt.org/vocab/quantitykind/SeebeckCoefficient - https://www.wikidata.org/wiki/Q1091448 - 12-21 - Measure of voltage induced by change of temperature. - - - - - - Joining process by softening the surfaces to be joined, either by heat or with a solvent (swelling welding, solvent welding), and pressing the softened surfaces together. - Welding - Schweißen - Welding - - - - - - CompositeMaterial - CompositeMaterial + 1/12 of the mass of an atom of the nuclide 12C in the ground state at rest. + UnifiedAtomicMassConstant + UnifiedAtomicMassConstant + https://www.wikidata.org/wiki/Q4817337 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-05-23 + 10-4.3 + 1/12 of the mass of an atom of the nuclide 12C in the ground state at rest. + https://doi.org/10.1351/goldbook.A00497 - - - - - T-1 L-1 M+1 I0 Θ0 N0 J0 - - - + + - MassPerLengthTimeUnit - MassPerLengthTimeUnit + Vector quantity equal to the time derivative of the electric flux density. + DisplacementCurrentDensity + DisplacementCurrentDensity + https://qudt.org/vocab/quantitykind/DisplacementCurrentDensity + https://www.wikidata.org/wiki/Q77614612 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-42 + 6-18 + Vector quantity equal to the time derivative of the electric flux density. - - - - A suspension of fine particles in the atmosphere. - Dust - Dust - A suspension of fine particles in the atmosphere. + + + + Quantum number related to the total angular momentum, J, of a nucleus in any specified state, normally called nuclear spin. + NuclearSpinQuantumNumber + NuclearSpinQuantumNumber + https://qudt.org/vocab/quantitykind/NuclearSpinQuantumNumber + https://www.wikidata.org/wiki/Q97577403 + 10-13.7 + Quantum number related to the total angular momentum, J, of a nucleus in any specified state, normally called nuclear spin. - - - - SystemUnit - SystemUnit + + + + Discrete data that are decoded as a sequence of 1/0, or true/false, or on/off. + DigitalData + BinaryData + DigitalData + Discrete data that are decoded as a sequence of 1/0, or true/false, or on/off. - - - - Electron probe microanalysis (EPMA) is used for quantitative analysis of the elemental composition of solid specimens at a micrometer scale. The method uses bombardment of the specimen by keV electrons to excite characteristic X-rays from the sample, which are then detected by using wavelength-dispersive (WD) spectrometers. - - ElectronProbeMicroanalysis - ElectronProbeMicroanalysis - Electron probe microanalysis (EPMA) is used for quantitative analysis of the elemental composition of solid specimens at a micrometer scale. The method uses bombardment of the specimen by keV electrons to excite characteristic X-rays from the sample, which are then detected by using wavelength-dispersive (WD) spectrometers. + + + + A tessellation of temporal slices. + Sequence + Sequence + A tessellation of temporal slices. - - - - Post-processing of the output of the calibration in order to get the actual calibration data to be used as input for the measurement. - CalibrationDataPostProcessing - CalibrationDataPostProcessing - Post-processing of the output of the calibration in order to get the actual calibration data to be used as input for the measurement. + + + + Data that are expressed through classical physics mechanisms, having one value and one state, and being in the same place at the same time. + ClassicalData + ClassicalData + Data that are expressed through classical physics mechanisms, having one value and one state, and being in the same place at the same time. - - - - - T-2 L+3 M+1 I0 Θ0 N-1 J0 - - - + + + - EnergyLengthPerAmountUnit - EnergyLengthPerAmountUnit + In an infinite medium, the ratio of the mean number of neutrons produced by fission due to neutrons of all energies to the mean number of neutrons produced by fissions due to thermal neutrons only. + FastFissionFactor + FastFissionFactor + https://qudt.org/vocab/quantitykind/FastFissionFactor + https://www.wikidata.org/wiki/Q99197493 + 10-75 + In an infinite medium, the ratio of the mean number of neutrons produced by fission due to neutrons of all energies to the mean number of neutrons produced by fissions due to thermal neutrons only. - - - - - - - - - - - - Axial vector quantity describing the rotation around an axis, with magnitude ω=|dφ/dt|, where dφ is the plane angle change during the infinitesimal time interval with duration dt, and with direction along the axis for which the rotation is clockwise. - AngularVelocity - AngularVelocity - https://qudt.org/vocab/quantitykind/AngularVelocity - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-01-41 - https://dbpedia.org/page/Angular_velocity - 3-12 - Axial vector quantity describing the rotation around an axis, with magnitude ω=|dφ/dt|, where dφ is the plane angle change during the infinitesimal time interval with duration dt, and with direction along the axis for which the rotation is clockwise. - https://en.wikipedia.org/wiki/Angular_velocity + + + + + Positron + Positron - - - + + - ThermodynamicEfficiency - ThermalEfficiency - ThermodynamicEfficiency - https://qudt.org/vocab/quantitykind/ThermalEfficiency - https://www.wikidata.org/wiki/Q1452104 - 5-25.1 + For a closed path, scalar quantity equal to the electric current through any surface bounded by the path. + CurrentLinkage + CurrentLinkage + https://qudt.org/vocab/quantitykind/CurrentLinkage + https://www.wikidata.org/wiki/Q77995703 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-46 + 6-37.4 + For a closed path, scalar quantity equal to the electric current through any surface bounded by the path. - - + + - If the potential step is from a potential at which no current flows (i.e., at which the oxidation or reduction of the electrochemically active species does not take place) to one at which the current is limited by diffusion (see diffusion-limited current), the current obeys the Cottrell equation. - amperometry in which the current is measured as a function of time after a change in the applied potential + Data resulting from the application of post-processing or model generation to other data. - Chronoamperometry - AmperiometricDetection - AmperometricCurrentTimeCurve - Chronoamperometry - amperometry in which the current is measured as a function of time after a change in the applied potential - https://doi.org/10.1515/pac-2018-0109 + SecondaryData + Elaborated data + SecondaryData + Data resulting from the application of post-processing or model generation to other data. + Deconvoluted curves + Intensity maps - - + + + + Atomic force microscopy (AFM) is an influential surface analysis technique used for micro/nanostructured coatings. This flexible technique can be used to obtain high-resolution nanoscale images and study local sites in air (conventional AFM) or liquid (electrochemical AFM) surroundings. + AtomicForceMicroscopy + AtomicForceMicroscopy + Atomic force microscopy (AFM) is an influential surface analysis technique used for micro/nanostructured coatings. This flexible technique can be used to obtain high-resolution nanoscale images and study local sites in air (conventional AFM) or liquid (electrochemical AFM) surroundings. + + + + + - Coefficient of heat transfer when heat exchange takes place between a body at thermodynamic temperature Ts and its surroundings that are at a reference temperature Tr. - SurfaceCoefficientOfHeatTransfer - SurfaceCoefficientOfHeatTransfer - https://qudt.org/vocab/quantitykind/SurfaceCoefficientOfHeatTransfer - https://www.wikidata.org/wiki/Q74770365 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-40 - 5-10.2 - Coefficient of heat transfer when heat exchange takes place between a body at thermodynamic temperature Ts and its surroundings that are at a reference temperature Tr. + RelativeMassFractionOfVapour + RelativeMassFractionOfVapour + 5-35 + + + + + + + T-4 L+2 M+1 I-1 Θ0 N0 J0 + + + + + ElectricPotentialPerTimeUnit + ElectricPotentialPerTimeUnit - + + - - + - At a point on the surface separating two media with different thermodynamic temperatures, magnitude of the density of heat flow rate φ divided by the absolute value of temperature difference ΔT. - CoefficientOfHeatTransfer - ThermalTransmittance - CoefficientOfHeatTransfer - https://qudt.org/vocab/quantitykind/CoefficientOfHeatTransfer - https://www.wikidata.org/wiki/Q634340 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-39 - 5-10.1 - At a point on the surface separating two media with different thermodynamic temperatures, magnitude of the density of heat flow rate φ divided by the absolute value of temperature difference ΔT. + Quotient of the activity A of a sample and the total area S of the surface of that sample. + SurfaceActivityDensity + SurfaceActivityDensity + https://qudt.org/vocab/quantitykind/SurfaceActivityDensity + https://www.wikidata.org/wiki/Q98103005 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-10 + 10-30 + Quotient of the activity A of a sample and the total area S of the surface of that sample. - + - - - - + + + + - - - A class devoted to categorize causal objects by specifying their granularity levels. - A granularity level is specified by a tiling decomposition of the whole y. A tiling is identified as a set of items {x1, x2, ... xn} called tiles that: - - are proper parts of y - - covers the entire whole (y = x1 +x2 + ... + xn) - - do not overlap - - are part of one, and one only, whole (inverse functional) - Reductionistic - Reductionistic - A class devoted to categorize causal objects by specifying their granularity levels. - A granularity level is specified by a tiling decomposition of the whole y. A tiling is identified as a set of items {x1, x2, ... xn} called tiles that: - - are proper parts of y - - covers the entire whole (y = x1 +x2 + ... + xn) - - do not overlap - - are part of one, and one only, whole (inverse functional) - Direct parthood is the antitransitive parthood relation used to build the class hierarchy (and the granularity hierarchy) for this perspective. + + + + The class of individuals that satisfy a whole defining criteria (i.e. belongs to a subclass of whole) and have no proper parts that satisfy that same criteria (no parts that are of the same type of the whole). + StrictFundamental + StrictFundamental + The class of individuals that satisfy a whole defining criteria (i.e. belongs to a subclass of whole) and have no proper parts that satisfy that same criteria (no parts that are of the same type of the whole). - - - - FiberboardManufacturing - FiberboardManufacturing + + + + The class of individuals that satisfy a whole defining criteria (i.e. belongs to a subclass of whole) and have no spatial parts that satisfy that same criteria (no parts that are of the same type of the whole). + SpatiallyFundamental + SpatiallyFundamental + The class of individuals that satisfy a whole defining criteria (i.e. belongs to a subclass of whole) and have no spatial parts that satisfy that same criteria (no parts that are of the same type of the whole). - + + + + Real part of the admittance. + ConductanceForAlternatingCurrent + ConductanceForAlternatingCurrent + https://www.wikidata.org/wiki/Q79464628 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-53 + 6-52.2 + Real part of the admittance. + + + + + + Unit for quantities of dimension one that are the fraction of two amount of substance. + AmountFractionUnit + AmountFractionUnit + Unit for quantities of dimension one that are the fraction of two amount of substance. + Unit for amount fraction. + + + + + + + Relative change of length with respect the original length. + RelativeLinearStrain + RelativeLinearStrain + https://qudt.org/vocab/quantitykind/LinearStrain + https://www.wikidata.org/wiki/Q1990546 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-58 + 4-17.2 + Relative change of length with respect the original length. + https://doi.org/10.1351/goldbook.L03560 + + + - FormingFromChip - FormingFromChip + FormingFromIonised + FormingFromIonised - - - - Ruby - Ruby + + + + + Time constant for recombination or trapping of minority charge carriers in semiconductors + CarrierLifetime + CarrierLifetime + https://qudt.org/vocab/quantitykind/CarrierLifetime + https://www.wikidata.org/wiki/Q5046374 + 12-32.2 + Time constant for recombination or trapping of minority charge carriers in semiconductors - - - - - T-1 L+2 M0 I0 Θ0 N0 J0 - - - + + - AreaPerTimeUnit - AreaPerTimeUnit + parameter characterizing the response to a step input of a first‑order, linear time‑invariant system + TimeConstant + TimeConstant + https://www.wikidata.org/wiki/Q1335249 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-05-26 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=351-45-32 + 3-15 + parameter characterizing the response to a step input of a first‑order, linear time‑invariant system - - - - a method used to measure the pore size distribution and total pore volume of solid materials by infiltrating mercury into the pores under controlled pressure conditions and analyzing the amount of mercury intrusion - - MercuryPorosimetry - MercuryPorosimetry - a method used to measure the pore size distribution and total pore volume of solid materials by infiltrating mercury into the pores under controlled pressure conditions and analyzing the amount of mercury intrusion + + + + + + + + + + + + + + Quantity in condensed matter physics. + EnergyDensityOfStates + EnergyDensityOfStates + https://qudt.org/vocab/quantitykind/EnergyDensityOfStates + https://www.wikidata.org/wiki/Q105687031 + 12-16 + Quantity in condensed matter physics. - - + + - - Porosimetry - Porosimetry + Titration in which the titrant is generated electrochemically, either by constant current or at constant potential. The titrant reacts stoichiometrically with the analyte, the amount of which is calculated using Faraday’s laws of electrolysis from the electric charge required to reach the end-point. Coulometric titrations are usually carried out in convective mass transfer mode using a large surface working electrode. The reference and auxiliary electrodes are located in sepa- rate compartments. A basic requirement is a 100 % current efficiency of titrant generation at the working electrode. End-point detection can be accomplished with potentiometry, amperometry, biamperometry, bipotentiometry, photometry, or by using a visual indicator. The main advantages are that titration is possible with less stable titrants, the standardi- zation of titrant is not necessary, the volume of the test solution is not changed, and the method is easily automated. + CoulometricTitration + CoulometricTitration + Titration in which the titrant is generated electrochemically, either by constant current or at constant potential. The titrant reacts stoichiometrically with the analyte, the amount of which is calculated using Faraday’s laws of electrolysis from the electric charge required to reach the end-point. Coulometric titrations are usually carried out in convective mass transfer mode using a large surface working electrode. The reference and auxiliary electrodes are located in sepa- rate compartments. A basic requirement is a 100 % current efficiency of titrant generation at the working electrode. End-point detection can be accomplished with potentiometry, amperometry, biamperometry, bipotentiometry, photometry, or by using a visual indicator. The main advantages are that titration is possible with less stable titrants, the standardi- zation of titrant is not necessary, the volume of the test solution is not changed, and the method is easily automated. - - - - - A solid solution made of two or more component substances. - SolidSolution - SolidSolution - A solid solution made of two or more component substances. + + + + Length of the repetition interval of a wave. + Wavelength + Wavelength + https://qudt.org/vocab/quantitykind/Wavelength + https://www.wikidata.org/wiki/Q41364 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-10-10 + https://dbpedia.org/page/Wavelength + 3-19 + Length of the repetition interval of a wave. + https://en.wikipedia.org/wiki/Wavelength + https://doi.org/10.1351/goldbook.W06659 - - + + - Quantity of dimension 1 equal to u/(1 + u), where u is mass ratio of water to dry matter. - MassFractionOfWater - MassFractionOfWater - https://qudt.org/vocab/quantitykind/MassFractionOfWater - https://www.wikidata.org/wiki/Q76379025 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-63 - 5-31 - Quantity of dimension 1 equal to u/(1 + u), where u is mass ratio of water to dry matter. + Quotient of the mass of water in a three-dimensional domain, irrespective of the form of aggregation, by the volume of the domain. + The mass concentration of water at saturation is denoted wsat. + MassConcentrationOfWater + MassConcentrationOfWater + https://qudt.org/vocab/quantitykind/MassConcentrationOfWater + https://www.wikidata.org/wiki/Q76378758 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-59 + 5-27 + Quotient of the mass of water in a three-dimensional domain, irrespective of the form of aggregation, by the volume of the domain. - - - - - T-3 L0 M+1 I-1 Θ0 N0 J0 - - - - - ElectricPotentialPerAreaUnit - ElectricPotentialPerAreaUnit + + + + + GreenUpQuark + GreenUpQuark + + + + + + Scanning probe microscopy (SPM) is a branch of microscopy that forms images of surfaces using a physical probe that scans the specimen. + + ScanningProbeMicroscopy + ScanningProbeMicroscopy + Scanning probe microscopy (SPM) is a branch of microscopy that forms images of surfaces using a physical probe that scans the specimen. - + - T0 L+2 M0 I0 Θ0 N-1 J0 + T-3 L+2 M+1 I-1 Θ-1 N0 J0 - AreaPerAmountUnit - AreaPerAmountUnit + ElectricPotentialPerTemperatureUnit + ElectricPotentialPerTemperatureUnit - - - - - - - - - - - - + + - Used to break-down a CharacterisationMeasurementProcess into his specific tasks. - CharacterisationMeasurementTask - CharacterisationMeasurementTask - Used to break-down a CharacterisationMeasurementProcess into his specific tasks. + XrdGrazingIncidence + XrdGrazingIncidence - - - - FormingFromIonised - FormingFromIonised + + + + Smoke is a solid aerosol made of particles emitted when a material undergoes combustion or pyrolysis. + Smoke + Smoke + Smoke is a solid aerosol made of particles emitted when a material undergoes combustion or pyrolysis. - - - - Thermogravimetric analysis or thermal gravimetric analysis (TGA) is a method of thermal analysis in which the mass of a sample is measured over time as the temperature changes. This measurement provides information about physical phenomena, such as phase transitions, absorption, adsorption and desorption; as well as chemical phenomena including chemisorptions, thermal decomposition, and solid-gas reactions (e.g., oxidation or reduction). - - Thermogravimetry - TGA - Thermogravimetry - Thermogravimetric analysis or thermal gravimetric analysis (TGA) is a method of thermal analysis in which the mass of a sample is measured over time as the temperature changes. This measurement provides information about physical phenomena, such as phase transitions, absorption, adsorption and desorption; as well as chemical phenomena including chemisorptions, thermal decomposition, and solid-gas reactions (e.g., oxidation or reduction). + + + + An aerosol composed of fine solid particles in air or another gas. + SolidAerosol + SolidAerosol + An aerosol composed of fine solid particles in air or another gas. - - - - - A coarse dispersion of liquid in a liquid continuum phase. - LiquidLiquidSuspension - LiquidLiquidSuspension - A coarse dispersion of liquid in a liquid continuum phase. + + + + + An initial step of a workflow. + There may be more than one begin task, if they run in parallel. + BeginStep + BeginStep + An initial step of a workflow. + There may be more than one begin task, if they run in parallel. - - - - - T-2 L-2 M+1 I0 Θ0 N0 J0 - - - - - MassPerSquareLengthSquareTimeUnit - MassPerSquareLengthSquareTimeUnit + + + + + Gas is a compressible fluid, a state of matter that has no fixed shape and no fixed volume. + Gas + Gas + Gas is a compressible fluid, a state of matter that has no fixed shape and no fixed volume. - - - - - - - - - - - + + + - Mass per unit area. - AreaDensity - AreaDensity - http://qudt.org/vocab/quantitykind/SurfaceDensity - https://doi.org/10.1351/goldbook.S06167 + Measure of the change of amplitude and phase angle of a plane wave propagating in a given direction. + PropagationCoefficient + PropagationCoefficient + https://qudt.org/vocab/quantitykind/PropagationCoefficient.html + https://www.wikidata.org/wiki/Q1434913 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-10-18 + 3-26.3 + Measure of the change of amplitude and phase angle of a plane wave propagating in a given direction. - - + + - The FIB-DIC (Focused Ion Beam - Digital Image Correlation) ring-core technique is a powerful method for measuring residual stresses in materials. It is based on milling a ring-shaped sample, or core, from the material of interest using a focused ion beam (FIB). + Parameter used for the sample inspection process - FibDic - FIBDICResidualStressAnalysis - FibDic - The FIB-DIC (Focused Ion Beam - Digital Image Correlation) ring-core technique is a powerful method for measuring residual stresses in materials. It is based on milling a ring-shaped sample, or core, from the material of interest using a focused ion beam (FIB). + SampleInspectionParameter + SampleInspectionParameter + Parameter used for the sample inspection process - - - - - - - - - - + + + - The DBpedia definition (http://dbpedia.org/page/Avogadro_constant) is outdated as May 20, 2019. It is now an exact quantity. - The number of constituent particles, usually atoms or molecules, that are contained in the amount of substance given by one mole. - -It defines the base unit mole in the SI system. - AvogadroConstant - AvogadroConstant - http://qudt.org/vocab/constant/AvogadroConstant - The number of constituent particles, usually atoms or molecules, that are contained in the amount of substance given by one mole. - -It defines the base unit mole in the SI system. - https://doi.org/10.1351/goldbook.A00543 + time constant for scattering, trapping or annihilation of charge carriers, phonons or other quasiparticles + RelaxationTime + RelaxationTime + https://www.wikidata.org/wiki/Q106041085 + 12-32.1 + time constant for scattering, trapping or annihilation of charge carriers, phonons or other quasiparticles - - - - Activity which has the goal of adjusting/tuning a measing instrument, without performing a measurement on a reference sample (which is a calibration). -The output of this process can be a specific measurement parameter to be used in the characteriasation measurement process. - Set of operations carried out on a measuring system so that it provides prescribed indications corresponding to given values of a quantity being measured -NOTE 1 If there is any doubt that the context in which the term is being used is that of metrology, the long form -“adjustment of a measuring system” might be used. -NOTE 2 Types of adjustment of a measuring system include zero adjustment, offset adjustment, and span adjustment -(sometimes called “gain adjustment”). -NOTE 3 Adjustment of a measuring system should not be confused with calibration, which is sometimes a prerequisite -for adjustment. -NOTE 4 After an adjustment of a measuring system, the measuring system must usually be recalibrated. - --- International Vocabulary of Metrology(VIM) - - MeasurementSystemAdjustment - MeasurementSystemAdjustment - Set of operations carried out on a measuring system so that it provides prescribed indications corresponding to given values of a quantity being measured -NOTE 1 If there is any doubt that the context in which the term is being used is that of metrology, the long form -“adjustment of a measuring system” might be used. -NOTE 2 Types of adjustment of a measuring system include zero adjustment, offset adjustment, and span adjustment -(sometimes called “gain adjustment”). -NOTE 3 Adjustment of a measuring system should not be confused with calibration, which is sometimes a prerequisite -for adjustment. -NOTE 4 After an adjustment of a measuring system, the measuring system must usually be recalibrated. + + + + GluonType8 + GluonType8 + --- International Vocabulary of Metrology(VIM) - Activity which has the goal of adjusting/tuning a measing instrument, without performing a measurement on a reference sample (which is a calibration). -The output of this process can be a specific measurement parameter to be used in the characteriasation measurement process. - Adjustment + + + + HotDipGalvanizing + Hot-dipGalvanizing + HotDipGalvanizing - - - - + + + - Ratio of the partial pressure p of water vapour in moist air to its partial pressure psat at saturation, at the same temperature φ = p/psat. - The relative humidity is often expressed in per cent. - RelativeHumidity - RelativeHumidity - https://qudt.org/vocab/quantitykind/RelativeHumidity - https://www.wikidata.org/wiki/Q2499617 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-65 - 5-33 - Ratio of the partial pressure p of water vapour in moist air to its partial pressure psat at saturation, at the same temperature φ = p/psat. - https://en.wikipedia.org/wiki/Humidity#Relative_humidity + Conventional radius of sphere in which the nuclear matter is included, + NuclearRadius + NuclearRadius + https://qudt.org/vocab/quantitykind/NuclearRadius + https://www.wikidata.org/wiki/Q3535676 + 10-19.1 + Conventional radius of sphere in which the nuclear matter is included, - + - - T-2 L+4 M+1 I0 Θ0 N0 J0 + + - - - EnergyAreaUnit - EnergyAreaUnit - - - - - - A standalone simulation, where a single physics equation is solved. - StandaloneModelSimulation - StandaloneModelSimulation - A standalone simulation, where a single physics equation is solved. + + + + + + + + + A boolean number. + Boolean + Boolean + A boolean number. - - - - A liquid aerosol composed of water droplets in air or another gas. - Vapor - Vapor - A liquid aerosol composed of water droplets in air or another gas. + + + + Voltammetry in which the electric current is recorded as the electrode potential is varied with time cyclically between two potential limits, normally at a constant scan rate. Cyclic voltammetry is frequently used for the investigation of mechanisms of electrochemical/electrode reactions. The current-potential curve may be modelled to obtain reaction mechanisms and electrochemical parameters. Normally the initial potential is chosen where no electrode reaction occurs and the switching potential is greater (more positive for an oxidation or more negative for a reduction) than the peak potential of the analyte reaction. The initial potential is usually the negative or positive limit of the cycle but can have any value between the two limits, as can the initial scan direction. The limits of the potential are known as the switching potentials. The plot of current against potential is termed a cyclic voltammogram. Usually peak-shaped responses are obtained for scans in both directions. + CyclicVoltammetry + CV + CyclicVoltammetry + https://www.wikidata.org/wiki/Q1147647 + https://dbpedia.org/page/Cyclic_voltammetry + Voltammetry in which the electric current is recorded as the electrode potential is varied with time cyclically between two potential limits, normally at a constant scan rate. Cyclic voltammetry is frequently used for the investigation of mechanisms of electrochemical/electrode reactions. The current-potential curve may be modelled to obtain reaction mechanisms and electrochemical parameters. Normally the initial potential is chosen where no electrode reaction occurs and the switching potential is greater (more positive for an oxidation or more negative for a reduction) than the peak potential of the analyte reaction. The initial potential is usually the negative or positive limit of the cycle but can have any value between the two limits, as can the initial scan direction. The limits of the potential are known as the switching potentials. The plot of current against potential is termed a cyclic voltammogram. Usually peak-shaped responses are obtained for scans in both directions. + https://en.wikipedia.org/wiki/Cyclic_voltammetry + https://doi.org/10.1515/pac-2018-0109 - - - - An aerosol composed of liquid droplets in air or another gas. - LiquidAerosol - LiquidAerosol - An aerosol composed of liquid droplets in air or another gas. + + + + DefinedEdgeCutting + Machining in which a tool is used whose number of cutting edges, geometry of the cutting wedges and position of the cutting edges in relation to the workpiece are determined + Spanen mit geometrisch bestimmten Schneiden + DefinedEdgeCutting - - - - A quantum decay is a fundamental causal system that is expressed as a complete bipartite directed graph K(1,n). - QuantumDecay - QuantumDecay - A quantum decay is a fundamental causal system that is expressed as a complete bipartite directed graph K(1,n). + + + + A estimator that uses its predefined knowledge to declare a property of an object. + Assigner + Assigner + A estimator that uses its predefined knowledge to declare a property of an object. + I estimate the molecular mass of the gas in my bottle as 1.00784 u because it is tagged as H. - - + + + + + + - - T0 L-2 M0 I0 Θ0 N0 J0 + + - - + - PerAreaUnit - PerAreaUnit + Scalar quantity equal to the flux of the electric flux density D through a given directed surface S. + ElectricFlux + ElectricFlux + https://qudt.org/vocab/quantitykind/ElectricFlux + https://www.wikidata.org/wiki/Q501267 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-41 + 6-17 + Scalar quantity equal to the flux of the electric flux density D through a given directed surface S. - - - + + + - The frequency standard in the SI system in which the photon absorption by transitions between the two hyperfine ground states of caesium-133 atoms are used to control the output frequency. + Distance a magnetic field penetrates the plane surface of a semi-finite superconductor. + LondonPenetrationDepth + LondonPenetrationDepth + https://qudt.org/vocab/quantitykind/LondonPenetrationDepth + https://www.wikidata.org/wiki/Q3277853 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=815-10-33 + 12-38.1 + Distance a magnetic field penetrates the plane surface of a semi-finite superconductor. + -It defines the base unit second in the SI system. - HyperfineTransitionFrequencyOfCs - HyperfineTransitionFrequencyOfCs - The frequency standard in the SI system in which the photon absorption by transitions between the two hyperfine ground states of caesium-133 atoms are used to control the output frequency. + + + + + In a nuclear reaction, sum of the kinetic energies and photon energies of the reaction products minus the sum of the kinetic and photon energies of the reactants. + ReactionEnergy + ReactionEnergy + https://qudt.org/vocab/quantitykind/ReactionEnergy + https://www.wikidata.org/wiki/Q98164745 + 10-37.1 + In a nuclear reaction, sum of the kinetic energies and photon energies of the reaction products minus the sum of the kinetic and photon energies of the reactants. + -It defines the base unit second in the SI system. + + + + Alpha spectrometry (also known as alpha(-particle) spectroscopy) is the quantitative study of the energy of alpha particles emitted by a radioactive nuclide that is an alpha emitter. As emitted alpha particles are mono-energetic (i.e. not emitted with a spectrum of energies, such as beta decay) with energies often distinct to the decay they can be used to identify which radionuclide they originated from. + AlphaSpectrometry + AlphaSpectrometry + Alpha spectrometry (also known as alpha(-particle) spectroscopy) is the quantitative study of the energy of alpha particles emitted by a radioactive nuclide that is an alpha emitter. As emitted alpha particles are mono-energetic (i.e. not emitted with a spectrum of energies, such as beta decay) with energies often distinct to the decay they can be used to identify which radionuclide they originated from. - - - - - An 'equation' that stands for a 'physical_law' by mathematically defining the relations between physics_quantities. - PhysicsEquation - PhysicsEquation - An 'equation' that stands for a 'physical_law' by mathematically defining the relations between physics_quantities. - The Newton's equation of motion. -The Schrödinger equation. -The Navier-Stokes equation. + + + + A state quantity equal to the difference between the total energy of a system and the sum of the macroscopic kinetic and potential energies of the system. + InternalEnergy + ThermodynamicEnergy + InternalEnergy + http://qudt.org/vocab/quantitykind/InternalEnergy + 5.20-2 + A state quantity equal to the difference between the total energy of a system and the sum of the macroscopic kinetic and potential energies of the system. + https://doi.org/10.1351/goldbook.I03103 - - - - Direct coulometry at controlled current is usually carried out in convective mass transfer mode. The end-point of the electrolysis, at which the current is stopped, must be determined either from the inflection point in the E–t curve or by using visual or objective end-point indi- cation, similar to volumetric methods. The total electric charge is calculated as the product of the constant current and time of electrolysis or can be measured directly using a coulometer. - The advantage of this method is that the electric charge consumed during the electrode reaction is directly proportional to the electrolysis time. Care must be taken to avoid the potential region where another electrode reaction may occur. - coulometry at an imposed, constant current in the electrochemical cell - - DirectCoulometryAtControlledCurrent - DirectCoulometryAtControlledCurrent - coulometry at an imposed, constant current in the electrochemical cell + + + + + + + + + + + + + Magnetic tension divided by magnetic flux. + MagneticReluctance + Reluctance + MagneticReluctance + https://qudt.org/vocab/quantitykind/Reluctance + https://www.wikidata.org/wiki/Q863390 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-28 + 6-39 + Magnetic tension divided by magnetic flux. - - - - - ElementaryFermion - ElementaryFermion + + + + + A coarse dispersion of liquid in a solid continuum phase. + SolidLiquidSuspension + SolidLiquidSuspension + A coarse dispersion of liquid in a solid continuum phase. - - - + + + - Quotient of mechanical output and input power. - MechanicalEfficiency - MechanicalEfficiency - https://www.wikidata.org/wiki/Q2628085 - 4-29 - Quotient of mechanical output and input power. + Energy to be added to or removed from a system under constant temperature and pressure to undergo a complete phase transition. + LatentHeatOfPhaseTransition + LatentHeatOfPhaseTransition + https://www.wikidata.org/wiki/Q106553458 + 9-16 + Energy to be added to or removed from a system under constant temperature and pressure to undergo a complete phase transition. - - + + + - Diffusion coefficient through the pore space of a porous media. - EffectiveDiffusionCoefficient - EffectiveDiffusionCoefficient - https://www.wikidata.org/wiki/Q258852 - Diffusion coefficient through the pore space of a porous media. + LatentHeat + LatentHeat + https://www.wikidata.org/wiki/Q207721 + 5-6.2 - - - - A language used to describe what a computer system should do. - SpecificationLanguage - SpecificationLanguage - A language used to describe what a computer system should do. - ACSL, VDM, LOTUS, MML, ... - https://en.wikipedia.org/wiki/Specification_language + + + + electrochemical method that applies current pulses to an electrochemical cell at rest and measures the voltage response + + GalvanostaticIntermittentTitrationTechnique + GITT + GalvanostaticIntermittentTitrationTechnique + https://www.wikidata.org/wiki/Q120906986 + electrochemical method that applies current pulses to an electrochemical cell at rest and measures the voltage response + + + + + + + + + + + + + + + Ngative quotient of Gibbs energy and temperature. + PlanckFunction + PlanckFunction + https://qudt.org/vocab/quantitykind/PlanckFunction + https://www.wikidata.org/wiki/Q76364998 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-25 + 5-23 + Ngative quotient of Gibbs energy and temperature. - - - + + - - Δ + + T+1 L0 M-1 I+1 Θ0 N0 J0 - - - Laplacian - Laplacian + + + + ElectricChargePerMassUnit + ElectricChargePerMassUnit - - - - DifferentialOperator - DifferentialOperator + + + + Determined + Determined - - - + + + + chronopotentiometry where the applied current is changed in steps + + StepChronopotentiometry + StepChronopotentiometry + chronopotentiometry where the applied current is changed in steps + + + + + - Square root of the product of electron and hole density in a semiconductor. - IntrinsicCarrierDensity - IntrinsicCarrierDensity - https://qudt.org/vocab/quantitykind/IntinsicCarrierDensity - https://www.wikidata.org/wiki/Q1303188 - 12-29.3 - Square root of the product of electron and hole density in a semiconductor. + Radius of the electron orbital in the hydrogen atom in its ground state in the Bohr model of the atom. + BohrRadius + BohrRadius + https://qudt.org/vocab/constant/BohrRadius + https://www.wikidata.org/wiki/Q652571 + 10-6 + Radius of the electron orbital in the hydrogen atom in its ground state in the Bohr model of the atom. + https://doi.org/10.1351/goldbook.B00693 - - - - - A programming language entity expressing a formal detailed plan of what a software is intended to do. - A source code is the companion of an application, being it the entity used to generate the application list of CPU executable instructions. - SourceCode - SourceCode - A programming language entity expressing a formal detailed plan of what a software is intended to do. - A source code is the companion of an application, being it the entity used to generate the application list of CPU executable instructions. - Source code (also referred to as source or code) is the version of software as it is originally written (i.e., typed into a computer) by a human in plain text (i.e., human readable alphanumeric characters). + + + + Force of gravity acting on a body. + Weight + Weight + http://qudt.org/vocab/quantitykind/Weight + 4-9.2 + https://doi.org/10.1351/goldbook.W06668 - - - - - - * - - - - Multiplication - Multiplication + + + + Ellipsometry is an optical technique that uses polarised light to probe the dielectric +properties of a sample (optical system). The common application of ellipsometry is +the analysis of thin films. Through the analysis of the state of polarisation of the +light that is reflected from the sample, ellipsometry yields information on the layers that are thinner than the wavelength of the light itself, down to a single atomic +layer or less. Depending on what is already known about the sample, the technique +can probe a range of properties including layer thickness, morphology, and chemical composition. + + Ellipsometry + Ellipsometry + Ellipsometry is an optical technique that uses polarised light to probe the dielectric +properties of a sample (optical system). The common application of ellipsometry is +the analysis of thin films. Through the analysis of the state of polarisation of the +light that is reflected from the sample, ellipsometry yields information on the layers that are thinner than the wavelength of the light itself, down to a single atomic +layer or less. Depending on what is already known about the sample, the technique +can probe a range of properties including layer thickness, morphology, and chemical composition. - - - - Quantum number related to the total angular momentum, J, of a nucleus in any specified state, normally called nuclear spin. - NuclearSpinQuantumNumber - NuclearSpinQuantumNumber - https://qudt.org/vocab/quantitykind/NuclearSpinQuantumNumber - https://www.wikidata.org/wiki/Q97577403 - 10-13.7 - Quantum number related to the total angular momentum, J, of a nucleus in any specified state, normally called nuclear spin. + + + + + T-2 L+2 M+1 I0 Θ-1 N0 J0 + + + + + EntropyUnit + EntropyUnit - - - - A meson with spin two. - TensorMeson - TensorMeson - A meson with spin two. + + + + + RedDownQuark + RedDownQuark - - - - For a closed path, scalar quantity equal to the electric current through any surface bounded by the path. - CurrentLinkage - CurrentLinkage - https://qudt.org/vocab/quantitykind/CurrentLinkage - https://www.wikidata.org/wiki/Q77995703 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-46 - 6-37.4 - For a closed path, scalar quantity equal to the electric current through any surface bounded by the path. + + + + + RedTopAntiQuark + RedTopAntiQuark - - - - A characteriser that declares a property for an object through the specific interaction required by the property definition. - Observer - Observer - A characteriser that declares a property for an object through the specific interaction required by the property definition. + + + + Data normalization involves adjusting raw data to a notionally common scale. + It involves the creation of shifted and/or scaled versions of the values to allow post-processing in a way that eliminates the effects of influences on subsequent properties extraction. + DataNormalisation + DataNormalisation + Data normalization involves adjusting raw data to a notionally common scale. + It involves the creation of shifted and/or scaled versions of the values to allow post-processing in a way that eliminates the effects of influences on subsequent properties extraction. - - - - - in the free electron model, the Fermi energy divided by the Boltzmann constant - FermiTemperature - FermiTemperature - https://qudt.org/vocab/quantitykind/FermiTemperature - https://www.wikidata.org/wiki/Q105942324 - 12-28 - in the free electron model, the Fermi energy divided by the Boltzmann constant + + + + Data preparation is the process of manipulating (or pre-processing) data (which may come from disparate data sources) to improve their quality or reduce bias in subsequent analysis. + DataPreparation + DataPreparation + Data preparation is the process of manipulating (or pre-processing) data (which may come from disparate data sources) to improve their quality or reduce bias in subsequent analysis. - - - + + + + + T-2 L0 M+1 I-1 Θ0 N0 J0 + + + - Electric polarization divided by electric constant and electric field strength. - ElectricSusceptibility - ElectricSusceptibility - https://qudt.org/vocab/quantitykind/ElectricSusceptibility - https://www.wikidata.org/wiki/Q598305 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-12-19 - 6-16 - Electric polarization divided by electric constant and electric field strength. - https://en.wikipedia.org/wiki/Electric_susceptibility + MagneticFluxDensityUnit + MagneticFluxDensityUnit - + - T-3 L+2 M+1 I-1 Θ0 N0 J0 + T+1 L+1 M0 I+1 Θ0 N0 J0 - - ElectricPotentialUnit - ElectricPotentialUnit + + ElectricDipoleMomentUnit + ElectricDipoleMomentUnit - - - - Free forming is pressure forming with tools that do not or only partially contain the shape of the workpiece and move against each other. - Non la metterei - Printing forms with tools that do not or only partially contain the shape of the workpiece and move against each other. The workpiece shape is created by free or fixed relative movement between the tool and the workpiece (kinematic shape generation). - FreeForming - FreeForming + + + + + + + + + + + + + + A computer language used to describe simulations. + SimulationLanguage + SimulationLanguage + A computer language used to describe simulations. + https://en.wikipedia.org/wiki/Simulation_language + + + + + + A language object respecting the syntactic rules of C++. + CPlusPlus + C++ + CPlusPlus + A language object respecting the syntactic rules of C++. - - - - The superclass for all physical quantities classes that are categorized according to a standard (e.g. ISQ). - StandardizedPhysicalQuantity - StandardizedPhysicalQuantity - The superclass for all physical quantities classes that are categorized according to a standard (e.g. ISQ). + + + + The radiant energy emitted, reflected, transmitted or received, per unit time. + RadiantFlux + RadiantFlux + http://qudt.org/vocab/quantitykind/RadiantFlux + https://doi.org/10.1351/goldbook.R05046 - - - - A characterisation experiment is the process by which a material's structure and properties are probed and measured. It is a fundamental process in the field of materials science, without which no scientific understanding of engineering materials could be ascertained. - A characterisation experiment is the process by which a material's structure and properties are probed and measured. It is a fundamental process in the field of materials science, without which no scientific understanding of engineering materials could be ascertained. - CharacterisationExperiment - CharacterisationExperiment - A characterisation experiment is the process by which a material's structure and properties are probed and measured. It is a fundamental process in the field of materials science, without which no scientific understanding of engineering materials could be ascertained. + + + + Given an electric current in a thin conducting loop and the linked flux caused by that electric current in another loop, the mutual inductance of the two loops is the linked flux divided by the electric current. + MutualInductance + MutualInductance + https://www.wikidata.org/wiki/Q78101401 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-36 + 6-41.2 + Given an electric current in a thin conducting loop and the linked flux caused by that electric current in another loop, the mutual inductance of the two loops is the linked flux divided by the electric current. + https://doi.org/10.1351/goldbook.M04076 - - - - + + + + + - - + + - - An experiment is a process that is intended to replicate a physical phenomenon in a controlled environment. - Experiment - Experiment - An experiment is a process that is intended to replicate a physical phenomenon in a controlled environment. - - - - - - - T-3 L-1 M+1 I0 Θ+1 N0 J0 - - - + - TemperaturePressurePerTimeUnit - TemperaturePressurePerTimeUnit + RelativePressureCoefficient + RelativePressureCoefficient + https://qudt.org/vocab/quantitykind/RelativePressureCoefficient + https://www.wikidata.org/wiki/Q74761852 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-30 + 5-3.3 - - - - A manufacturing process in which metallic material is anodically dissolved under the influence of an electric current and an electrolyte solution. The current flow can be caused either by connection to an external current source or due to local element formation on the workpiece (etching). - SparkErosion - elektrochemisches Abtragen - SparkErosion + + + + + BlueCharmQuark + BlueCharmQuark - - - - - Mean energy, excluding rest energy, of the particles that are emitted, transferred, or received. - RadiantEnergy - RadiantEnergy - https://www.wikidata.org/wiki/Q1259526 - 10-45 - Mean energy, excluding rest energy, of the particles that are emitted, transferred, or received. + + + + + A coarse dispersion of liquid in a liquid continuum phase. + LiquidLiquidSuspension + LiquidLiquidSuspension + A coarse dispersion of liquid in a liquid continuum phase. - + - T0 L-1 M0 I0 Θ+1 N0 J0 + T0 L-2 M0 I0 Θ0 N0 J+1 - TemperaturePerLengthUnit - TemperaturePerLengthUnit + LuminanceUnit + LuminanceUnit - + - T-6 L+4 M+2 I-2 Θ0 N0 J0 + T+1 L0 M0 I0 Θ+1 N0 J0 - LorenzNumberUnit - LorenzNumberUnit + TemperatureTimeUnit + TemperatureTimeUnit - - - - - BlueBottomQuark - BlueBottomQuark + + + + A characteriser that declares a property for an object through the specific interaction required by the property definition. + Observer + Observer + A characteriser that declares a property for an object through the specific interaction required by the property definition. - - + + + + + Quotient of the Planck constant and the product of the mass of the particle and the speed of light in vacuum. + ComptonWavelength + ComptonWavelength + https://qudt.org/vocab/constant/ComptonWavelength + https://www.wikidata.org/wiki/Q1145377 + 10-20 + Quotient of the Planck constant and the product of the mass of the particle and the speed of light in vacuum. + https://en.wikipedia.org/wiki/Compton_wavelength + + + + + + + + - - T+2 L-1 M-1 I+1 Θ0 N0 J0 + + - - + - MagneticReluctivityUnit - MagneticReluctivityUnit + quotient of number of acceptor levels and volume. + AcceptorDensity + AcceptorDensity + https://qudt.org/vocab/quantitykind/AcceptorDensity + https://www.wikidata.org/wiki/Q105979968 + 12-29.5 + quotient of number of acceptor levels and volume. - - - + + - - + + + 1 - - A set of one or more 'CharacterisationInstruments' and often other devices, including any sample holder, reagent and supply, assembled and adapted to give information used to generate 'MeasuredQuantityProperty' within specified intervals for quantities of specified kinds. - Set of one or more measuring instruments and often other components, assembled and -adapted to give information used to generate measured values within specified intervals for -quantities of specified kinds -NOTE 1 The components mentioned in the definition may be devices, reagents, and supplies. -NOTE 2 A measuring system is sometimes referred to as “measuring equipment” or “device”, for example in ISO 10012, -Measurement management systems – Requirements for measurement processes and measuring equipment and ISO -17025, General requirements for the competence of testing and calibration laboratories. -NOTE 3 Although the terms “measuring system” and “measurement system” are frequently used synonymously, the -latter is instead sometimes used to refer to a measuring system plus all other entities involved in a measurement, -including the object under measurement and the person(s) performing the measurement. -NOTE 4 A measuring system can be used as a measurement standard. - - CharacterisationSystem - CharacterisationSystem - Set of one or more measuring instruments and often other components, assembled and -adapted to give information used to generate measured values within specified intervals for -quantities of specified kinds -NOTE 1 The components mentioned in the definition may be devices, reagents, and supplies. -NOTE 2 A measuring system is sometimes referred to as “measuring equipment” or “device”, for example in ISO 10012, -Measurement management systems – Requirements for measurement processes and measuring equipment and ISO -17025, General requirements for the competence of testing and calibration laboratories. -NOTE 3 Although the terms “measuring system” and “measurement system” are frequently used synonymously, the -latter is instead sometimes used to refer to a measuring system plus all other entities involved in a measurement, -including the object under measurement and the person(s) performing the measurement. -NOTE 4 A measuring system can be used as a measurement standard. - A set of one or more 'CharacterisationInstruments' and often other devices, including any sample holder, reagent and supply, assembled and adapted to give information used to generate 'MeasuredQuantityProperty' within specified intervals for quantities of specified kinds. - Measuring system + + + + + 1 + + + + A measurement unit that is made of a metric prefix and a unit symbol. + PrefixedUnit + PrefixedUnit + A measurement unit that is made of a metric prefix and a unit symbol. - - + + + + PlasticSintering + PlasticSintering + + + + + - Enthalpy per unit mass. - SpecificEnthalpy - SpecificEnthalpy - https://qudt.org/vocab/quantitykind/SpecificEnthalpy - https://www.wikidata.org/wiki/Q21572993 - 5-21.3 - Enthalpy per unit mass. - https://en.wikipedia.org/wiki/Enthalpy#Specific_enthalpy + Number dN of spontaneous nuclear transitions or nuclear disintegrations for a radionuclide of amount N produced during a short time interval dt, divided by this time interval. + Activity + Activity + https://qudt.org/vocab/quantitykind/Activity + https://www.wikidata.org/wiki/Q317949 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-05 + 10-27 + Number dN of spontaneous nuclear transitions or nuclear disintegrations for a radionuclide of amount N produced during a short time interval dt, divided by this time interval. + https://goldbook.iupac.org/terms/view/A00114 - + - T-2 L+2 M0 I0 Θ-1 N0 J0 + T+1 L+1 M-1 I0 Θ0 N0 J0 - EntropyPerMassUnit - EntropyPerMassUnit + LengthTimePerMassUnit + LengthTimePerMassUnit - - - - The equivalence-point is obtained as the intersection of linear parts of the conductance G, versus titrant volume V, curve (see - The method can be used for deeply coloured or turbid solutions. Acid-base and precipita- tion reactions are most frequently used. - The method is based on replacing an ionic species of the analyte with another species, cor- responding to the titrant or the product with significantly different conductance. - titration in which the electric conductivity of a solution is measured as a function of the amount of titrant added - - ConductometricTitration - ConductometricTitration - https://www.wikidata.org/wiki/Q11778221 - titration in which the electric conductivity of a solution is measured as a function of the amount of titrant added - https://doi.org/10.1515/pac-2018-0109 + + + + + Quotient of change of volume and original volume. + RelativeVolumeStrain + BulkStrain + VolumeStrain + RelativeVolumeStrain + https://qudt.org/vocab/quantitykind/VolumeStrain + https://www.wikidata.org/wiki/Q73432507 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-60 + 4-17.4 + Quotient of change of volume and original volume. + https://doi.org/10.1351/goldbook.V06648 - - - - The conductivity of a solution depends on the concentration and nature of ions present. - measurement principle in which the electric conductivity of a solution is measured - - Conductometry - Conductometry - https://www.wikidata.org/wiki/Q901180 - measurement principle in which the electric conductivity of a solution is measured - Monitoring of the purity of deionized water. - https://en.wikipedia.org/wiki/Conductometry - https://doi.org/10.1515/pac-2018-0109 + + + + Atomic quantum number related to the number n−1 of radial nodes of one-electron wave functions. + PrincipalQuantumNumber + PrincipalQuantumNumber + https://qudt.org/vocab/quantitykind/PrincipalQuantumNumber + https://www.wikidata.org/wiki/Q867448 + 10-13.2 + Atomic quantum number related to the number n−1 of radial nodes of one-electron wave functions. - - + + - In an infinite medium, the probability that a neutron slowing down will traverse all or some specified portion of the range of resonance energies without being absorbed. - ResonanceEscapeProbability - ResonanceEscapeProbability - https://qudt.org/vocab/quantitykind/ResonanceEscapeProbability - https://www.wikidata.org/wiki/Q4108072 - 10-68 - In an infinite medium, the probability that a neutron slowing down will traverse all or some specified portion of the range of resonance energies without being absorbed. + Frequency by which the nucleus angular momentum vector precesses about the axis of an external magnetic field. + NuclearPrecessionAngularFrequency + NuclearPrecessionAngularFrequency + https://www.wikidata.org/wiki/Q97641779 + 10-15.3 + Frequency by which the nucleus angular momentum vector precesses about the axis of an external magnetic field. - + - T-3 L+2 M+1 I0 Θ-1 N0 J0 + T0 L+3 M-1 I0 Θ0 N0 J0 - ThermalConductanceUnit - ThermalConductanceUnit - - - - - - - An object which is an holistic temporal part of another object. - Here we consider a temporal interval that is lower than the characteristic time of the physical process that provides the causality connection between the object parts. - SubObject - SubObject - An object which is an holistic temporal part of another object. - If an inhabited house is considered as an house that is occupied by some people in its majority of time, then an interval of inhabited house in which occasionally nobody is in there is no more an inhabited house, but an unhinabited house, since this temporal part does not satisfy the criteria of the whole. + VolumePerMassUnit + VolumePerMassUnit - - - - - - - - - - - - - Vector characterising a dislocation in a crystal lattice. - BurgersVector - BurgersVector - https://qudt.org/vocab/quantitykind/BurgersVector - https://www.wikidata.org/wiki/Q623093 - 12-6 - Vector characterising a dislocation in a crystal lattice. + + + + + Forming of a solid body, whereby the plastic state is essentially brought about by a bending stress + Bending + Bending - - - - machining with a circular cutting movement in which the axis of rotation of the tool and the axis of the internal surface to be produced are identical and the feed movement is in the direction of this axis. The axis of rotation of the cutting movement maintains its position relative to the workpiece independently of the feed movement (axis of rotation workpiece-bound). - Drilling - Bohren - Drilling + + + + A peak-shaped adsorptive stripping voltammogram is obtained. Peak current depends on time of accumulation, mass transport of analyte (stirring), scan rate and mode (linear or pulse), and analyte concentration in solution. AdSV is usually employed for analysis of organic compounds or metal complexes with organic ligands. Stripping is done by means of an anodic or a cathodic voltammetric scan (linear or pulse), during which the adsorbed compound is oxidized or reduced. + Stripping voltammetry involving pre-concentration by adsorption of the analyte (in contrast to electro-chemical accumulation). + AdsorptiveStrippingVoltammetry + AdSV + AdsorptiveStrippingVoltammetry + Stripping voltammetry involving pre-concentration by adsorption of the analyte (in contrast to electro-chemical accumulation). + https://doi.org/10.1515/pac-2018-0109 - - - - - BlueTopQuark - BlueTopQuark + + + + + Critical thermodynamic temperature of a ferromagnet. + CurieTemperature + CurieTemperature + https://qudt.org/vocab/quantitykind/CurieTemperature + https://www.wikidata.org/wiki/Q191073 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-12-51 + 12-35.1 + Critical thermodynamic temperature of a ferromagnet. - - - - LaserCutting - LaserCutting + + + + + + + + + + + + Set of physics principles (and associated governing equations) that describes the interaction between the sample and the probe. + + PhysicsOfInteraction + PhysicsOfInteraction + Set of physics principles (and associated governing equations) that describes the interaction between the sample and the probe. + In x-ray diffraction, this is represented by the set of physics equations that describe the relation between the incident x-ray beam and the diffracted beam (the most simple form for this being the Bragg’s law). - + - T0 L+5 M0 I0 Θ0 N0 J0 + T-2 L-2 M+1 I0 Θ0 N0 J0 - - SectionAreaIntegralUnit - SectionAreaIntegralUnit - - - - - Ratio of void volume and total volume of a porous material. - Porosity - Porosity - https://www.wikidata.org/wiki/Q622669 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=801-31-32 - Ratio of void volume and total volume of a porous material. - https://doi.org/10.1351/goldbook.P04762 - - - - - - ConcreteOrPlasterPouring - ConcreteOrPlasterPouring - - - - - - FormingFromPulp - FormingFromPulp + MassPerSquareLengthSquareTimeUnit + MassPerSquareLengthSquareTimeUnit - - - + + - Number dN of spontaneous nuclear transitions or nuclear disintegrations for a radionuclide of amount N produced during a short time interval dt, divided by this time interval. - Activity - Activity - https://qudt.org/vocab/quantitykind/Activity - https://www.wikidata.org/wiki/Q317949 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-05 - 10-27 - Number dN of spontaneous nuclear transitions or nuclear disintegrations for a radionuclide of amount N produced during a short time interval dt, divided by this time interval. - https://goldbook.iupac.org/terms/view/A00114 - - - - - - A function defined using functional notation. - A mathematical relation that relates each element in the domain (X) to exactly one element in the range (Y). - MathematicalFunction - FunctionDefinition - MathematicalFunction - A function defined using functional notation. - y = f(x) + Cut-off angular wavenumber in the Debye model of the vibrational spectrum of a solid. + DebyeAngularWaveNumber + DebyeAngluarRepetency + DebyeAngularWaveNumber + https://qudt.org/vocab/quantitykind/DebyeAngularWavenumber + https://www.wikidata.org/wiki/Q105554370 + 12-9.3 + Cut-off angular wavenumber in the Debye model of the vibrational spectrum of a solid. - - - - An equation that define a new variable in terms of other mathematical entities. - DefiningEquation - DefiningEquation - An equation that define a new variable in terms of other mathematical entities. - The definition of velocity as v = dx/dt. + + + + Gibbs energy per unit mass. + SpecificGibbsEnergy + SpecificGibbsEnergy + https://qudt.org/vocab/quantitykind/SpecificGibbsEnergy + https://www.wikidata.org/wiki/Q76360636 + 5-21.5 + Gibbs energy per unit mass. + -The definition of density as mass/volume. + + + + + A coarse dispersion of solids in a liquid continuum phase. + LiquidSolidSuspension + LiquidSolidSuspension + A coarse dispersion of solids in a liquid continuum phase. + Mud + -y = f(x) + + + + + + + + + + + + + + A strict fundamental object overcrossing a manufacturing process, the intersection being the agent that participates and drives the manufacturing process. + Manufacturer + Manufacturer + A strict fundamental object overcrossing a manufacturing process, the intersection being the agent that participates and drives the manufacturing process. - + - T0 L+2 M0 I0 Θ0 N0 J0 + T0 L+1 M0 I0 Θ0 N-1 J0 - - AreaUnit - AreaUnit - - - - - - GrowingCrystal - GrowingCrystal - - - - - StandardAbsoluteActivityOfSolvent - StandardAbsoluteActivityOfSolvent - https://www.wikidata.org/wiki/Q89556185 - 9-27.3 + LengthPerAmountUnit + LengthPerAmountUnit - + + - - + - Reciprocal of the coefficient of heat transfer. - ThermalInsulance - CoefficientOfThermalInsulance - ThermalInsulance - https://qudt.org/vocab/quantitykind/ThermalInsulance - https://www.wikidata.org/wiki/Q2596212 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-41 - 5-11 - Reciprocal of the coefficient of heat transfer. + Disintegrations per unit time dN/dt for an atomic nucleus divided by the number of nuclei N existing at the same time t. + DecayConstant + DisintegrationConstant + DecayConstant + https://qudt.org/vocab/quantitykind/DecayConstant + https://www.wikidata.org/wiki/Q11477200 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-11 + 10-24 + Disintegrations per unit time dN/dt for an atomic nucleus divided by the number of nuclei N existing at the same time t. + https://doi.org/10.1351/goldbook.D01538 - - - + + + - The speed of light in vacuum. Defines the base unit metre in the SI system. - SpeedOfLightInVacuum - SpeedOfLightInVacuum - http://qudt.org/vocab/constant/SpeedOfLight_Vacuum - 6-35.2 - The speed of light in vacuum. Defines the base unit metre in the SI system. - https://doi.org/10.1351/goldbook.S05854 + NumberOfTurnsInAWinding + NumberOfTurnsInAWinding + https://www.wikidata.org/wiki/Q77995997 + 6-38 - - - - - BlueDownQuark - BlueDownQuark + + + + Normal pulse polarography is NPV in which a dropping mercury electrode is used as the working electrode. A pulse is applied just before the mechanically enforced end of the drop. The pulse width is usually 10 to 20 % of the drop time. The drop dislodgment is synchro- nized with current sampling, which is carried out just before the end of the pulse, as in NPV. + Sigmoidal wave-shaped voltammograms are obtained. + The current is sampled at the end of the pulse and then plotted versus the potential of the pulse. + The current is sampled just before the end of the pulse, when the charging current is greatly diminished. In this way, the ratio of faradaic current to charging current is enhanced and the negative influence of charging current is partially eliminated. Due to the improved signal (faradaic current) to noise (charging current) ratio, the limit of detec- tion is lowered. + The sensitivity of NPV is not affected by the reversibility of the electrode reaction of the analyte. + voltammetry in which potential pulses of amplitude increasing by a constant increment and with a pulse width of 2 to 200 ms are superimposed on a constant initial potential + + NormalPulseVoltammetry + NPV + NormalPulseVoltammetry + voltammetry in which potential pulses of amplitude increasing by a constant increment and with a pulse width of 2 to 200 ms are superimposed on a constant initial potential + https://doi.org/10.1515/pac-2018-0109 - - + + + + + - - + + - - An 'equation' that has parts two 'polynomial'-s - AlgebricEquation - AlgebricEquation - 2 * a - b = c - - - - - - Vector quantity from the origin of a coordinate system to a point in space. - PositionVector - PositionVector - https://www.wikidata.org/wiki/Q192388 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=102-03-15 - https://dbpedia.org/page/Position_(geometry) - 3-1.10 - Vector quantity from the origin of a coordinate system to a point in space. - https://en.wikipedia.org/wiki/Position_(geometry) - - - - - - - CouplingFactor - InductiveCouplingFactor - CouplingFactor - https://www.wikidata.org/wiki/Q78101715 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-41 - 6-42.1 - - - - - - Extended X-ray absorption fine structure (EXAFS), along with X-ray absorption near edge structure (XANES), is a subset of X-ray absorption spectroscopy (XAS). Like other absorption spectroscopies, XAS techniques follow Beer's law. The X-ray absorption coefficient of a material as a function of energy is obtained by directing X-rays of a narrow energy range at a sample, while recording the incident and transmitted x-ray intensity, as the incident x-ray energy is incremented. -When the incident x-ray energy matches the binding energy of an electron of an atom within the sample, the number of x-rays absorbed by the sample increases dramatically, causing a drop in the transmitted x-ray intensity. This results in an absorption edge. Every element has a set of unique absorption edges corresponding to different binding energies of its electrons, giving XAS element selectivity. XAS spectra are most often collected at synchrotrons because of the high intensity of synchrotron X-ray sources allow the concentration of the absorbing element to reach as low as a few parts per million. Absorption would be undetectable if the source is too weak. Because X-rays are highly penetrating, XAS samples can be gases, solids or liquids. - - Exafs - Exafs - Extended X-ray absorption fine structure (EXAFS), along with X-ray absorption near edge structure (XANES), is a subset of X-ray absorption spectroscopy (XAS). Like other absorption spectroscopies, XAS techniques follow Beer's law. The X-ray absorption coefficient of a material as a function of energy is obtained by directing X-rays of a narrow energy range at a sample, while recording the incident and transmitted x-ray intensity, as the incident x-ray energy is incremented. -When the incident x-ray energy matches the binding energy of an electron of an atom within the sample, the number of x-rays absorbed by the sample increases dramatically, causing a drop in the transmitted x-ray intensity. This results in an absorption edge. Every element has a set of unique absorption edges corresponding to different binding energies of its electrons, giving XAS element selectivity. XAS spectra are most often collected at synchrotrons because of the high intensity of synchrotron X-ray sources allow the concentration of the absorbing element to reach as low as a few parts per million. Absorption would be undetectable if the source is too weak. Because X-rays are highly penetrating, XAS samples can be gases, solids or liquids. - - - - - - MultiParticlePath - MultiParticlePath - - - - - - - A neutrino belonging to the second generation of leptons. - MuonNeutrino - MuonNeutrino - A neutrino belonging to the second generation of leptons. - https://en.wikipedia.org/wiki/Muon_neutrino - - - - - - Ratio of specific heat capacity at constant pressure cp to specific heat capacity at constant volume cV, thus γ = cp/cV. - RatioOfSpecificHeatCapacities - RatioOfSpecificHeatCapacities - https://qudt.org/vocab/quantitykind/HeatCapacityRatio - https://www.wikidata.org/wiki/Q503869 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-51 - 5-17.1 - Ratio of specific heat capacity at constant pressure cp to specific heat capacity at constant volume cV, thus γ = cp/cV. - - - - - - - Free forming is pressure forming with tools that do not or only partially contain the shape of the workpiece and move against each other (from: DIN 8583 Part 3/05.70). - Moulding - Gesenkformen - Moulding - + For an atom or nucleus, this energy is quantized and can be written as: - - - - A tessellation in wich a tile has next two or more non spatially connected tiles. - Fork - Fork - A tessellation in wich a tile has next two or more non spatially connected tiles. - + W = g μ M B - - - - The energy of an object due to its motion. - KineticEnergy - KineticEnergy - http://qudt.org/vocab/quantitykind/KineticEnergy - 4-28.2 - The energy of an object due to its motion. - https://doi.org/10.1351/goldbook.K03402 - +where g is the appropriate g factor, μ is mostly the Bohr magneton or nuclear magneton, M is magnetic quantum number, and B is magnitude of the magnetic flux density. - - - - Scanning probe microscopy (SPM) is a branch of microscopy that forms images of surfaces using a physical probe that scans the specimen. - - ScanningProbeMicroscopy - ScanningProbeMicroscopy - Scanning probe microscopy (SPM) is a branch of microscopy that forms images of surfaces using a physical probe that scans the specimen. - +-- ISO 80000 + Vector quantity μ causing a change to its energy ΔW in an external magnetic field of field flux density B: - - - - Forming of vessel parts from a flat mould into a three-dimensional shape by means of a press and tools, whereby material is neither removed nor added - DeepDrawing - Tiefziehen - DeepDrawing + ΔW = −μ · B + MagneticDipoleMoment + MagneticDipoleMoment + http://qudt.org/vocab/quantitykind/MagneticDipoleMoment + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-55 + 10-9.1 + 6-30 + Vector quantity μ causing a change to its energy ΔW in an external magnetic field of field flux density B: + + ΔW = −μ · B + http://goldbook.iupac.org/terms/view/M03688 - - - - - - - + + - - + + T-2 L-1 M+1 I0 Θ-1 N0 J0 - + + - At a point fixed in a medium with a temperature field, scalar quantity λ characterizing the ability of the medium to transmit heat through a surface element containing that point: φ = −λ grad T, where φ is the density of heat flow rate and T is thermodynamic temperature. - In an anisotropic medium, thermal conductivity is a tensor quantity. - ThermalConductivity - ThermalConductivity - https://qudt.org/vocab/quantitykind/ThermalConductivity - https://www.wikidata.org/wiki/Q487005 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-38 - https://dbpedia.org/page/Thermal_conductivity - 5-9 - At a point fixed in a medium with a temperature field, scalar quantity λ characterizing the ability of the medium to transmit heat through a surface element containing that point: φ = −λ grad T, where φ is the density of heat flow rate and T is thermodynamic temperature. + PressurePerTemperatureUnit + PressurePerTemperatureUnit - - - - - energy difference between an electron at rest at infinity and an electron at the lowest level of the conduction band in an insulator or semiconductor - ElectronAffinity - ElectronAffinity - https://qudt.org/vocab/quantitykind/ElectronAffinity - https://www.wikidata.org/wiki/Q105846486 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-06-22 - 12-25 - energy difference between an electron at rest at infinity and an electron at the lowest level of the conduction band in an insulator or semiconductor + + + + + BlueStrangeQuark + BlueStrangeQuark - - + + - - RawSample - RawSample + Amperometry in which the current is measured as a function of time after a change in the applied potential. If the potential step is from a potential at which no current flows (i.e., at which the oxidation or reduction of the electrochemically active species does not take place) to one at which the current is limited by diffusion (see diffusion-limited current), the current obeys the Cottrell equation. + Chronoamperometry + AmperiometricDetection + AmperometricCurrentTimeCurve + Chronoamperometry + Amperometry in which the current is measured as a function of time after a change in the applied potential. If the potential step is from a potential at which no current flows (i.e., at which the oxidation or reduction of the electrochemically active species does not take place) to one at which the current is limited by diffusion (see diffusion-limited current), the current obeys the Cottrell equation. + https://doi.org/10.1515/pac-2018-0109 - - - + + + + + T0 L+2 M0 I0 Θ+1 N0 J0 + + + - Quotient of the Planck constant and the product of the mass of the particle and the speed of light in vacuum. - ComptonWavelength - ComptonWavelength - https://qudt.org/vocab/constant/ComptonWavelength - https://www.wikidata.org/wiki/Q1145377 - 10-20 - Quotient of the Planck constant and the product of the mass of the particle and the speed of light in vacuum. - https://en.wikipedia.org/wiki/Compton_wavelength + AreaTemperatureUnit + AreaTemperatureUnit - - - - - A foam of trapped gas in a liquid. - LiquidFoam - LiquidFoam - A foam of trapped gas in a liquid. + + + + PowderCoating + PowderCoating - + + + + + The Rydberg constant represents the limiting value of the highest wavenumber (the inverse wavelength) of any photon that can be emitted from the hydrogen atom, or, alternatively, the wavenumber of the lowest-energy photon capable of ionizing the hydrogen atom from its ground state. + RybergConstant + RybergConstant + http://qudt.org/vocab/constant/RydbergConstant + https://doi.org/10.1351/goldbook.R05430 + + + - + - + - A dose quantity used in the International Commission on Radiological Protection (ICRP) system of radiological protection. - DoseEquivalent - DoseEquivalent - http://qudt.org/vocab/quantitykind/DoseEquivalent - 10-83.1 - A dose quantity used in the International Commission on Radiological Protection (ICRP) system of radiological protection. - https://doi.org/10.1351/goldbook.E02101 + Differential quotient of fluence Φ with respect to time. + ParticleFluenceRate + ParticleFluenceRate + https://qudt.org/vocab/quantitykind/ParticleFluenceRate + https://www.wikidata.org/wiki/Q98497410 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-16 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-04-19 + 10-44 + Differential quotient of fluence Φ with respect to time. - + - T-3 L+2 M+1 I-2 Θ0 N0 J0 + T+1 L0 M0 I+1 Θ-1 N0 J0 - ElectricResistanceUnit - ElectricResistanceUnit + ElectricChargePerTemperatureUnit + ElectricChargePerTemperatureUnit - - - - - - - - - - - - - - - - - - - - - - - - A baryon containing one or more strange quarks, but no charm, bottom, or top quark. - This form of matter may exist in a stable form within the core of some neutron stars. - Hyperon - Hyperon - A baryon containing one or more strange quarks, but no charm, bottom, or top quark. - This form of matter may exist in a stable form within the core of some neutron stars. - https://en.wikipedia.org/wiki/Hyperon - + + + + "The unit one is the neutral element of any system of units – necessary and present automatically." - - - - An product that is ready for commercialisation. - CommercialProduct - Product - CommercialProduct - An product that is ready for commercialisation. +-- SI Brochure + Represents the number 1, used as an explicit unit to say something has no units. + UnitOne + Unitless + UnitOne + http://qudt.org/vocab/unit/UNITLESS + Represents the number 1, used as an explicit unit to say something has no units. + "The unit one is the neutral element of any system of units – necessary and present automatically." + +-- SI Brochure + Refractive index or volume fraction. + Typically used for ratios of two units whos dimensions cancels out. - + - T0 L0 M-1 I0 Θ0 N+1 J0 + T0 L0 M0 I0 Θ-1 N0 J0 - AmountPerMassUnit - AmountPerMassUnit - - - - - - A computer language that expresses the presentation of structured documents. - StyleSheetLanguage - StyleSheetLanguage - A computer language that expresses the presentation of structured documents. - CSS - https://en.wikipedia.org/wiki/Style_sheet_language - - - - - - Method of mechanical testing that provides values for the modulus of elasticity in bending, flexural stress, flexural strain, and the flexural stress–strain response of a material sample - - ThreePointBendingTesting - ThreePointFlexuralTest - ThreePointBendingTesting - https://www.wikidata.org/wiki/Q2300905 - Method of mechanical testing that provides values for the modulus of elasticity in bending, flexural stress, flexural strain, and the flexural stress–strain response of a material sample - https://en.wikipedia.org/wiki/Three-point_flexural_test + PerTemperatureUnit + PerTemperatureUnit - - - - electrochemical method that measures the voltage drop of a cell resulting from a square wave current load - - HPPC - HybridPulsePowerCharacterisation - HybridPulsePowerCharacterization - HPPC - electrochemical method that measures the voltage drop of a cell resulting from a square wave current load + + + + + Energy of the electron in a hydrogen atom in its ground state + HartreeEnergy + HartreeEnergy + https://qudt.org/vocab/unit/E_h.html + https://www.wikidata.org/wiki/Q476572 + https://dbpedia.org/page/Hartree + 10-8 + Energy of the electron in a hydrogen atom in its ground state + https://en.wikipedia.org/wiki/Hartree + https://doi.org/10.1351/goldbook.H02748 - - + + - - + + + 1 + + An Internationalized Resource Identifier (IRI) is a compact sequence of characters that identifies an abstract or physical resource. It is similar to URI, but greatly extends the allowed character set from ASCII to the Universal Character Set. + IRIs are commonly used as identifiers for ontological entities, although the extended unicode character set is rarely used. + IRI + IRI + An Internationalized Resource Identifier (IRI) is a compact sequence of characters that identifies an abstract or physical resource. It is similar to URI, but greatly extends the allowed character set from ASCII to the Universal Character Set. + https://en.wiktionary.org/wiki/Ῥόδος + IRIs are commonly used as identifiers for ontological entities, although the extended unicode character set is rarely used. + https://en.wikipedia.org/wiki/Internationalized_Resource_Identifier + + + + + + + - - + + + + Product of the number density na of the atoms and the cross section σ_tot for a given type of atoms + VolumicTotalCrossSection + MacroscopicTotalCrossSection + VolumicTotalCrossSection + https://qudt.org/vocab/quantitykind/MacroscopicTotalCrossSection + https://www.wikidata.org/wiki/Q98280548 + 10-42.2 + Product of the number density na of the atoms and the cross section σ_tot for a given type of atoms + + + + + + + - - + + - - Deduction - IndexSemiosis - Deduction + + Time derivative of kerma. + KermaRate + KermaRate + https://qudt.org/vocab/quantitykind/KermaRate + https://www.wikidata.org/wiki/Q99713105 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-12-28 + 10-86.2 + Time derivative of kerma. - - - - - Quantity wd = 1 − wH2O, where wH2O is mass fraction of water. - MassFractionOfDryMatter - MassFractionOfDryMatter - https://qudt.org/vocab/quantitykind/MassFractionOfDryMatter - https://www.wikidata.org/wiki/Q76379189 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-64 - 5-32 - Quantity wd = 1 − wH2O, where wH2O is mass fraction of water. + + + + A suspension of liquid droplets dispersed in a gas through an atomization process. + Spray + Spray + A suspension of liquid droplets dispersed in a gas through an atomization process. - + + + + Electroplating + Electroplating + + + - T+1 L0 M0 I0 Θ+1 N0 J0 + T0 L0 M0 I0 Θ0 N+1 J0 - TemperatureTimeUnit - TemperatureTimeUnit + AmountUnit + AmountUnit - - + + + - Real part of the admittance. - ConductanceForAlternatingCurrent - ConductanceForAlternatingCurrent - https://www.wikidata.org/wiki/Q79464628 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-53 - 6-52.2 - Real part of the admittance. + in a metal, highest occupied energy level at zero thermodynamic temperature, where energy level means the energy of an electron in the interior of a substance + FermiEnergy + FermiEnergy + https://qudt.org/vocab/quantitykind/FermiEnergy + https://www.wikidata.org/wiki/Q431335 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-06-18 + 12-27.1 + in a metal, highest occupied energy level at zero thermodynamic temperature, where energy level means the energy of an electron in the interior of a substance + https://doi.org/10.1351/goldbook.F02340 - - + + + + + Sum of the kinetic energy of the α-particle produced in the disintegration process and the recoil energy of the product atom in a reference frame in which the emitting nucleus is at rest before its disintegration. + AlphaDisintegrationEnergy + AlphaDisintegrationEnergy + http://qudt.org/vocab/quantitykind/AlphaDisintegrationEnergy + https://www.wikidata.org/wiki/Q98146025 + 10-32 + Sum of the kinetic energy of the α-particle produced in the disintegration process and the recoil energy of the product atom in a reference frame in which the emitting nucleus is at rest before its disintegration. + + + + + + + HelmholtzEnergy + HelmholtzFreeEnergy + HelmholtzEnergy + https://www.wikidata.org/wiki/Q865821 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-24 + 5-20.4 + https://doi.org/10.1351/goldbook.H02772 + + + + + + A quantum decay is a fundamental causal system that is expressed as a complete bipartite directed graph K(1,n). + QuantumDecay + QuantumDecay + A quantum decay is a fundamental causal system that is expressed as a complete bipartite directed graph K(1,n). + + + + - Dilatometry is a method for characterising the dimensional changes of materials with variation of temperature conditions. + Field emission scanning electron microscopy (FE-SEM) is an advanced technology used to capture the microstructure image of the materials. FE-SEM is typically performed in a high vacuum because gas molecules tend to disturb the electron beam and the emitted secondary and backscattered electrons used for imaging. - Dilatometry - https://www.lboro.ac.uk/research/lmcc/facilities/dilatometry/#:~:text=Dilatometry%20is%20a%20method%20for,to%20mimic%20an%20industrial%20process. - Dilatometry - Dilatometry is a method for characterising the dimensional changes of materials with variation of temperature conditions. + FieldEmissionScanningElectronMicroscopy + FE-SEM + FieldEmissionScanningElectronMicroscopy + Field emission scanning electron microscopy (FE-SEM) is an advanced technology used to capture the microstructure image of the materials. FE-SEM is typically performed in a high vacuum because gas molecules tend to disturb the electron beam and the emitted secondary and backscattered electrons used for imaging. - - - - DefinedEdgeCutting - Machining in which a tool is used whose number of cutting edges, geometry of the cutting wedges and position of the cutting edges in relation to the workpiece are determined - Spanen mit geometrisch bestimmten Schneiden - DefinedEdgeCutting + + + + + A workflow whose output ca be used as input for another workflow of the same type, iteratively, within the framework of a larger workflow. + IterativeStep + IterativeStep + A workflow whose output ca be used as input for another workflow of the same type, iteratively, within the framework of a larger workflow. + Jacobi method numerical step, involving the multiplication between a matrix A and a vector x, whose result is used to update the vector x. - - - + + - Quotient of the traversed circular path length of a point in space during a rotation and its distance from the axis or centre of rotation. - RotationalDisplacement - AngularDisplacement - RotationalDisplacement - https://www.wikidata.org/wiki/Q3305038 - 3-6 - Quotient of the traversed circular path length of a point in space during a rotation and its distance from the axis or centre of rotation. - https://en.wikipedia.org/wiki/Angular_displacement + Helmholtz energy per unit mass. + SpecificHelmholtzEnergy + SpecificHelmholtzEnergy + https://qudt.org/vocab/quantitykind/SpecificHelmholtzEnergy + https://www.wikidata.org/wiki/Q76359554 + 5-21.4 + Helmholtz energy per unit mass. - - + + - DrawForms - DrawForms + hardening of a workpiece caused by the precipitation of one or more compounds from a supersaturated solid solution + PrecipitationHardening + PrecipitationHardening + hardening of a workpiece caused by the precipitation of one or more compounds from a supersaturated solid solution - - - - ChemicallyDefinedMaterial - ChemicallyDefinedMaterial + + + + Unit for quantities of dimension one that are the fraction of two lengths. + LengthFractionUnit + LengthFractionUnit + Unit for quantities of dimension one that are the fraction of two lengths. + Unit for plane angle. + + + + + + + + + + + + + + + ThermalDiffusivity + ThermalDiffusionCoefficient + ThermalDiffusivity + https://qudt.org/vocab/quantitykind/ThermalDiffusivity + https://www.wikidata.org/wiki/Q3381809 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-53 + 5-14 + + + + + + + + + + + + + + + + A characterisation of an object with an actual interaction. + Observation + Observation + A characterisation of an object with an actual interaction. - + - T0 L+2 M0 I0 Θ-1 N0 J0 + T-2 L0 M+1 I0 Θ0 N0 J0 - AreaPerTemperatureUnit - AreaPerTemperatureUnit - - - - - - - The class of individuals that stand for muon elementary particles belonging to the second generation of leptons. - Muon - Muon - The class of individuals that stand for muon elementary particles belonging to the second generation of leptons. - https://en.wikipedia.org/wiki/Muon - - - - - - - RedCharmAntiQuark - RedCharmAntiQuark + ForcePerLengthUnit + ForcePerLengthUnit - - - - - A coarse dispersion of gas in a liquid continuum phase. - LiquidGasSuspension - LiquidGasSuspension - A coarse dispersion of gas in a liquid continuum phase. - Sparkling water + + + + Stripping voltammetry in which material accumulated at the working electrode is electrochemically reduced in the stripping step. A peak-shaped cathodic stripping voltammogram is obtained. Peak current depends on time of accumulation, mass transport of analyte (stirring), scan rate and mode (linear or pulse), and analyte concentration in solution. + CathodicStrippingVoltammetry + CSV + CathodicStrippingVoltammetry + https://www.wikidata.org/wiki/Q4016325 + Stripping voltammetry in which material accumulated at the working electrode is electrochemically reduced in the stripping step. A peak-shaped cathodic stripping voltammogram is obtained. Peak current depends on time of accumulation, mass transport of analyte (stirring), scan rate and mode (linear or pulse), and analyte concentration in solution. + https://doi.org/10.1515/pac-2018-0109 - + - Dynamic light scattering (DLS) is a technique in physics that can be used to determine the size distribution profile of small particles in suspension or polymers in solution. In the scope of DLS, temporal fluctuations are usually analyzed using the intensity or photon auto-correlation function (also known as photon correlation spectroscopy - PCS or quasi-elastic light scattering - QELS). + Light scattering is the way light behaves when it interacts with a medium that contains particles or the boundary between different mediums where defects or structures are present. It is different than the effects of refraction, where light undergoes a change in index of refraction as it passes from one medium to another, or reflection, where light reflects back into the same medium, both of which are governed by Snell’s law. Light scattering can be caused by factors such as the nature, texture, or specific structures of a surface and the presence of gas, liquid, or solid particles through which light propagates, as well as the nature of the light itself, of its wavelengths and polarization states. It usually results in diffuse light and can also affect the dispersion of color. - DynamicLightScattering - DLS - DynamicLightScattering - Dynamic light scattering (DLS) is a technique in physics that can be used to determine the size distribution profile of small particles in suspension or polymers in solution. In the scope of DLS, temporal fluctuations are usually analyzed using the intensity or photon auto-correlation function (also known as photon correlation spectroscopy - PCS or quasi-elastic light scattering - QELS). + LightScattering + LightScattering + Light scattering is the way light behaves when it interacts with a medium that contains particles or the boundary between different mediums where defects or structures are present. It is different than the effects of refraction, where light undergoes a change in index of refraction as it passes from one medium to another, or reflection, where light reflects back into the same medium, both of which are governed by Snell’s law. Light scattering can be caused by factors such as the nature, texture, or specific structures of a surface and the presence of gas, liquid, or solid particles through which light propagates, as well as the nature of the light itself, of its wavelengths and polarization states. It usually results in diffuse light and can also affect the dispersion of color. - - - - PlasticModeling - PlasticModeling + + + + Data that occurs naturally without an encoding agent producing it. + This is a really broad class that gathers all physical phenomena in which a variation occurs naturally. + NonEncodedData + EnvironmentalData + NonEncodedData + Data that occurs naturally without an encoding agent producing it. + A cloud in the sky. The radiative spectrum of a star. + This is a really broad class that gathers all physical phenomena in which a variation occurs naturally. - - - - - T-1 L+3 M0 I0 Θ0 N0 J0 - - - - - VolumePerTimeUnit - VolumePerTimeUnit + + + + + BlueTopAntiQuark + BlueTopAntiQuark - - - - A state quantity equal to the difference between the total energy of a system and the sum of the macroscopic kinetic and potential energies of the system. - InternalEnergy - ThermodynamicEnergy - InternalEnergy - http://qudt.org/vocab/quantitykind/InternalEnergy - 5.20-2 - A state quantity equal to the difference between the total energy of a system and the sum of the macroscopic kinetic and potential energies of the system. - https://doi.org/10.1351/goldbook.I03103 + + + + + GreenDownAntiQuark + GreenDownAntiQuark - - - - Ion chromatography (or ion-exchange chromatography) is a form of chromatography that separates ions and ionizable polar molecules based on their affinity to the ion exchanger. - - IonChromatography - IonChromatography - Ion chromatography (or ion-exchange chromatography) is a form of chromatography that separates ions and ionizable polar molecules based on their affinity to the ion exchanger. - https://en.wikipedia.org/wiki/Ion_chromatography + + + + + BlueDownQuark + BlueDownQuark - + + - + - + - Fundamental translation vectors for the reciprocal lattice. - FundamentalReciprocalLatticeVector - FundamentalReciprocalLatticeVector - https://qudt.org/vocab/quantitykind/FundamentalReciprocalLatticeVector - https://www.wikidata.org/wiki/Q105475399 - 12-2.2 - Fundamental translation vectors for the reciprocal lattice. + Coercive field strength in a substance when either the magnetic flux density or the magnetic polarization and magnetization is brought from its value at magnetic saturation to zero by monotonic reduction of the applied magnetic field strength. + Coercivity + Coercivity + https://qudt.org/vocab/quantitykind/Coercivity + https://www.wikidata.org/wiki/Q432635 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-12-69 + 6-31 + Coercive field strength in a substance when either the magnetic flux density or the magnetic polarization and magnetization is brought from its value at magnetic saturation to zero by monotonic reduction of the applied magnetic field strength. - - - - a technique used to measure the voltage of a cell under a low applied current as an estimate for the open-circuit voltage - - PseudoOpenCircuitVoltageMethod - PseudoOCV - PseudoOpenCircuitVoltageMethod - a technique used to measure the voltage of a cell under a low applied current as an estimate for the open-circuit voltage + + + + + Factor by which the intensity of a diffraction line is reduced because of the lattice vibrations. + DebyeWallerFactor + DebyeWallerFactor + https://qudt.org/vocab/quantitykind/Debye-WallerFactor + https://www.wikidata.org/wiki/Q902587 + 12-8 + Factor by which the intensity of a diffraction line is reduced because of the lattice vibrations. - - - - The class of physical objects possessing a structure that is larger than a single composite particle, for which its bosonic or fermionic nature is undetermined. - CompositePhysicalObject - CompositePhysicalObject - The class of physical objects possessing a structure that is larger than a single composite particle, for which its bosonic or fermionic nature is undetermined. + + + + A group of machineries used to process a group of similar parts. + Is not simply a collection of machineries, since the connection between them is due to the parallel flow of processed parts that comes from a unique source and ends into a common repository. + MachineCell + MachineCell + A group of machineries used to process a group of similar parts. + + + + + + A system arranged to setup a specific manufacturing process. + ManufacturingSystem + ManufacturingSystem + A system arranged to setup a specific manufacturing process. + + + + + + + TauAntiNeutrino + TauAntiNeutrino + + + + + + + Internal energy per amount of substance. + MolarInternalEnergy + MolarInternalEnergy + https://www.wikidata.org/wiki/Q88523106 + 9-6.1 + Internal energy per amount of substance. + + + + + + + Deals with undefined shapes both input and output. + The creation of a material entity starting from fundamental substances, involving chemical phenomena (e.g. reaction, bonding). + MaterialSynthesis + MaterialSynthesis + The creation of a material entity starting from fundamental substances, involving chemical phenomena (e.g. reaction, bonding). + Deals with undefined shapes both input and output. + + + + + + + Quotient of mass defect and the unified atomic mass constant. + RelativeMassDefect + RelativeMassDefect + https://qudt.org/vocab/quantitykind/RelativeMassDefect + https://www.wikidata.org/wiki/Q98038718 + 10-22.2 + Quotient of mass defect and the unified atomic mass constant. + + + + + + Suggestion of Rickard Armiento + CrystallineMaterial + CrystallineMaterial + + + + + + Measurement of energy in a thermodynamic system. + Enthalpy + Enthalpy + http://qudt.org/vocab/quantitykind/Enthalpy + 5.20-3 + https://doi.org/10.1351/goldbook.E02141 - - - - An elementary bosonic particle with zero spin produced by the quantum excitation of the Higgs field. - HiggsBoson - HiggsBoson - An elementary bosonic particle with zero spin produced by the quantum excitation of the Higgs field. - https://en.wikipedia.org/wiki/Higgs_boson + + + + + T-2 L+2 M+1 I0 Θ0 N-1 J0 + + + + + EnergyPerAmountUnit + EnergyPerAmountUnit - + - T+3 L-2 M-1 I+1 Θ0 N0 J0 + T0 L-3 M0 I0 Θ0 N+1 J0 - ElectricCurrentPerUnitEnergyUnit - ElectricCurrentPerUnitEnergyUnit + AmountConcentrationUnit + AmountConcentrationUnit - - - - A meson with spin zero and odd parity. - PseudoscalarMeson - PseudoscalarMeson - A meson with spin zero and odd parity. - https://en.wikipedia.org/wiki/Pseudoscalar_meson + + + + DrawForms + DrawForms - - - - - - - - - - - - - Quotient of thermal conductivity, and the product of electric conductivity and thermodynamic temperature. - LorenzCoefficient - LorenzNumber - LorenzCoefficient - https://qudt.org/vocab/quantitykind/LorenzCoefficient - https://www.wikidata.org/wiki/Q105728754 - 12-18 - Quotient of thermal conductivity, and the product of electric conductivity and thermodynamic temperature. + + + + A computational application that uses a physical model to predict the behaviour of a system, providing a identifiable analogy with the original object. + PhysicalBasedSimulationSoftware + PhysicalBasedSimulationSoftware + A computational application that uses a physical model to predict the behaviour of a system, providing a identifiable analogy with the original object. - - - - - RedStrangeQuark - RedStrangeQuark + + + + A coded that is not atomic with respect to a code of description. + A description is a collection of properties that depicts an object. It is not atomic since it is made of several properties collected together. + Description + Description + A coded that is not atomic with respect to a code of description. + A biography. + A sentence about some object, depticting its properties. + A description is a collection of properties that depicts an object. It is not atomic since it is made of several properties collected together. - - + + - Physical device (or the chain of devices) that is used to measure, quantify and store the signal after its interaction with the sample. + Mathematical model used to process data. + The PostProcessingModel use is mainly intended to get secondary data from primary data. - Detector - Detector - Physical device (or the chain of devices) that is used to measure, quantify and store the signal after its interaction with the sample. - Back Scattered Electrons (BSE) and Secondary Electrons (SE) detectors for SEM - Displacement and force sensors for mechanical testing + PostProcessingModel + PostProcessingModel + Mathematical model used to process data. + The PostProcessingModel use is mainly intended to get secondary data from primary data. - - - - - - - - - - - - - - Number of nucleons in an atomic nucleus. - MassNumber - AtomicMassNumber - NucleonNumber - MassNumber - http://qudt.org/vocab/quantitykind/MassNumber - Number of nucleons in an atomic nucleus. + + + + method of determining the internal resistance of an electrochemical cell by applying a low current followed by higher current within a short period, and then record the changes of battery voltage and current + + DirectCurrentInternalResistance + DirectCurrentInternalResistance + method of determining the internal resistance of an electrochemical cell by applying a low current followed by higher current within a short period, and then record the changes of battery voltage and current - - - + + + + + T-6 L-2 M+2 I0 Θ0 N0 J0 + + + - Change of phase angle with the length along the path travelled by a plane wave. - The imaginary part of the propagation coefficient. - PhaseCoefficient - PhaseChangeCoefficient - PhaseCoefficient - https://qudt.org/vocab/quantitykind/PhaseCoefficient - https://www.wikidata.org/wiki/Q32745742 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-10-20 - 3-26.2 - Change of phase angle with the length along the path travelled by a plane wave. - The imaginary part of the propagation coefficient. - https://en.wikipedia.org/wiki/Propagation_constant#Phase_constant + SquarePressurePerSquareTimeUnit + SquarePressurePerSquareTimeUnit - - - - - Chosen value of amount concentration, usually equal to 1 mol dm−3. - StandardAmountConcentration - StandardConcentration - StandardMolarConcentration - StandardAmountConcentration - https://www.wikidata.org/wiki/Q88871689 - Chosen value of amount concentration, usually equal to 1 mol dm−3. - 9-12.2 - https://doi.org/10.1351/goldbook.S05909 + + + + MaterialRelationComputation + MaterialRelationComputation - - - - - IsentropicCompressibility - IsentropicCompressibility - https://qudt.org/vocab/quantitykind/IsentropicCompressibility - https://www.wikidata.org/wiki/Q2990695 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-32 - 5-5.2 + + + + GluonType4 + GluonType4 - - - - - Dissociation may occur stepwise. - ratio of the number of dissociation events to the maximum number of theoretically possible dissociation events. - DegreeOfDissociation - DissociationFraction - DegreeOfDissociation - https://qudt.org/vocab/quantitykind/DegreeOfDissociation - https://www.wikidata.org/wiki/Q907334 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-01-09 - 9-43 - ratio of the number of dissociation events to the maximum number of theoretically possible dissociation events. - https://doi.org/10.1351/goldbook.D01566 + + + + Profilometry is a technique used to extract topographical data from a surface. This can be a single point, a line scan or even a full three dimensional scan. The purpose of profilometry is to get surface morphology, step heights and surface roughness. + + Profilometry + Profilometry + Profilometry is a technique used to extract topographical data from a surface. This can be a single point, a line scan or even a full three dimensional scan. The purpose of profilometry is to get surface morphology, step heights and surface roughness. - - - - - Written as pOH - number quantifying the acidic or the alkaline character of a solution, equal to the negative of the decimal logarithm of ion activity aOH- of the hydroxide anion OH- -pH = −10 log(a_OH-) - POH - POH - number quantifying the acidic or the alkaline character of a solution, equal to the negative of the decimal logarithm of ion activity aOH- of the hydroxide anion OH- -pH = −10 log(a_OH-) + + + + + A neutrino belonging to the second generation of leptons. + MuonNeutrino + MuonNeutrino + A neutrino belonging to the second generation of leptons. + https://en.wikipedia.org/wiki/Muon_neutrino - - - - - RedTopQuark - RedTopQuark + + + + a method for analyzing the crystal structure of powdered materials by measuring the diffraction patterns produced when X-rays interact with randomly oriented crystallites within the sample + + XrayPowderDiffraction + XRPD + XrayPowderDiffraction + a method for analyzing the crystal structure of powdered materials by measuring the diffraction patterns produced when X-rays interact with randomly oriented crystallites within the sample + https://en.wikipedia.org/wiki/Powder_diffraction - - + + - Compression tests characterize material and product strength and stiffness under applied crushing loads. These tests are typically conducted by applying compressive pressure to a test specimen using platens or specialized fixtures with a testing machine that produces compressive loads. + a technique used to analyze the atomic and molecular structure of crystalline materials by observing the diffraction patterns produced when X-rays interact with the regular array of atoms in the crystal lattice - CompressionTesting - CompressionTesting - Compression tests characterize material and product strength and stiffness under applied crushing loads. These tests are typically conducted by applying compressive pressure to a test specimen using platens or specialized fixtures with a testing machine that produces compressive loads. + XrayDiffraction + XRD + XrayDiffraction + https://www.wikidata.org/wiki/Q12101244 + a technique used to analyze the atomic and molecular structure of crystalline materials by observing the diffraction patterns produced when X-rays interact with the regular array of atoms in the crystal lattice + https://en.wikipedia.org/wiki/X-ray_crystallography - - - - - T+1 L0 M0 I+1 Θ0 N-1 J0 - - - - - ElectricChargePerAmountUnit - ElectricChargePerAmountUnit + + + + Differential Pulse Voltammetry in which small potential pulses are superimposed onto a linearly varying potential. + DifferentialLinearPulseVoltammetry + DifferentialLinearPulseVoltammetry + Differential Pulse Voltammetry in which small potential pulses are superimposed onto a linearly varying potential. - - - - - T-2 L+3 M0 I0 Θ0 N0 J0 - - - + + + + - VolumePerSquareTimeUnit - VolumePerSquareTimeUnit + Quotient of the thermal diffusion ratio and the product of the local amount-of-substance fractions. + ThermalDiffusionFactor + ThermalDiffusionFactor + https://qudt.org/vocab/quantitykind/ThermalDiffusionFactor + https://www.wikidata.org/wiki/Q96249629 + 9-40.2 + Quotient of the thermal diffusion ratio and the product of the local amount-of-substance fractions. - + - T0 L-2 M+1 I0 Θ+1 N0 J0 + T0 L0 M+1 I0 Θ+1 N0 J0 - TemperatureMassPerAreaUnit - TemperatureMassPerAreaUnit + MassTemperatureUnit + MassTemperatureUnit - - - - Data that are decoded retaining its continuous variations characteristic. - The fact that there may be a finite granularity in the variations of the material basis (e.g. the smallest peak in a vynil that can be recognized by the piezo-electric transducer) does not prevent a data to be analog. It means only that the focus on such data encoding is on a scale that makes such variations negligible, making them practically a continuum. - AnalogData - AnalogData - Data that are decoded retaining its continuous variations characteristic. - A vynil contain continuous information about the recorded sound. - The fact that there may be a finite granularity in the variations of the material basis (e.g. the smallest peak in a vynil that can be recognized by the piezo-electric transducer) does not prevent a data to be analog. It means only that the focus on such data encoding is on a scale that makes such variations negligible, making them practically a continuum. + + + + A manufacturing process in which interchangeable parts are added to a product in a sequential manner to create an end product. + Is not collection, since the connection between the elements of an assembly line occurs through the flow of objects that are processed. + AssemblyLine + AssemblyLine + A manufacturing process in which interchangeable parts are added to a product in a sequential manner to create an end product. - + - + - + - Quotient of the linear attenuation coefficient µ and the mass density ρ of the medium. - MassAttenuationCoefficient - MassAttenuationCoefficient - https://qudt.org/vocab/quantitykind/MassAttenuationCoefficient - https://www.wikidata.org/wiki/Q98591983 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-04-27 - 10-50 - Quotient of the linear attenuation coefficient µ and the mass density ρ of the medium. - - - - - - - Sum of energies deposited by ionizing radiation in a given volume. - EnergyImparted - EnergyImparted - https://qudt.org/vocab/quantitykind/EnergyImparted - https://www.wikidata.org/wiki/Q99526944 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-34 - 10-80.1 - Sum of energies deposited by ionizing radiation in a given volume. + Strength of a magnetic field. Commonly denoted H. + MagneticFieldStrength + MagnetizingFieldStrength + MagneticFieldStrength + http://qudt.org/vocab/quantitykind/MagneticFieldStrength + https://www.wikidata.org/wiki/Q28123 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-56 + 6-25 + https://doi.org/10.1351/goldbook.M03683 - - + + + + + + + + + + - Speed with which the envelope of a wave propagates in space. - GroupVelocity - GroupSpeed - GroupVelocity - https://www.wikidata.org/wiki/Q217361 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-10-15 - https://dbpedia.org/page/Group_velocity - 3-23.2 - Speed with which the envelope of a wave propagates in space. - https://en.wikipedia.org/wiki/Group_velocity + Fundamental translation vector for the crystal lattice. + FundamentalLatticeVector + FundamentalLatticeVector + https://qudt.org/vocab/quantitykind/FundamentalLatticeVector + https://www.wikidata.org/wiki/Q105451063 + 12-1.2 + Fundamental translation vector for the crystal lattice. - - - - Quantum number of an atom describing the inclination of the nuclear spin with respect to a quantization axis given by the magnetic field produced by the orbital electrons. - HyperfineStructureQuantumNumber - HyperfineStructureQuantumNumber - https://qudt.org/vocab/quantitykind/HyperfineStructureQuantumNumber - https://www.wikidata.org/wiki/Q97577449 - 10-13.8 - Quantum number of an atom describing the inclination of the nuclear spin with respect to a quantization axis given by the magnetic field produced by the orbital electrons. + + + + The dependent variable for which an equation has been written. + Unknown + Unknown + The dependent variable for which an equation has been written. + Velocity, for the Navier-Stokes equation. - - - - A process occurring by natural (non-intentional) laws. - NaturalProcess - NonIntentionalProcess - NaturalProcess - A process occurring by natural (non-intentional) laws. + + + + + GreenBottomAntiQuark + GreenBottomAntiQuark - - - + + - StandardChemicalPotential - StandardChemicalPotential - https://qudt.org/vocab/quantitykind/StandardChemicalPotential - https://www.wikidata.org/wiki/Q89333468 - 9-21 - https://doi.org/10.1351/goldbook.S05908 + ModulusOfImpedance + ModulusOfImpedance + https://qudt.org/vocab/quantitykind/ModulusOfImpedance + https://www.wikidata.org/wiki/Q25457909 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-44 + 6-51.4 - - - - JavaScript - JavaScript + + + + Application of additive manufacturing intended for reducing the time needed for producing prototypes. + RapidPrototyping + RapidPrototyping + Application of additive manufacturing intended for reducing the time needed for producing prototypes. - - - - A wear test measures the changes in conditions caused by friction, and the result is obtained from deformation, scratches, and indentations on the interacting surfaces. Wear is defined as the progressive removal of the material from a solid surface and manifested by a change in the geometry of the surface. - WearTesting - WearTesting - A wear test measures the changes in conditions caused by friction, and the result is obtained from deformation, scratches, and indentations on the interacting surfaces. Wear is defined as the progressive removal of the material from a solid surface and manifested by a change in the geometry of the surface. + + + + LowPressureCasting + LowPressureCasting - - - - - T0 L0 M0 I0 Θ+1 N0 J0 - - - + + + - TemperatureUnit - TemperatureUnit + Measure of the tendency of a solution to take in pure solvent by osmosis. + OsmoticPressure + OsmoticPressure + https://qudt.org/vocab/quantitykind/OsmoticPressure + https://www.wikidata.org/wiki/Q193135 + 9-28 + Measure of the tendency of a solution to take in pure solvent by osmosis. + https://doi.org/10.1351/goldbook.O04344 - - + + + - At a given point within a domain of quasi-infinitesimal volume V, vector quantity equal to the electric dipole moment p of the substance contained within the domain divided by the volume V. - ElectricPolarization - ElectricPolarization - https://qudt.org/vocab/quantitykind/ElectricPolarization - https://www.wikidata.org/wiki/Q1050425 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-37 - 6-7 - At a given point within a domain of quasi-infinitesimal volume V, vector quantity equal to the electric dipole moment p of the substance contained within the domain divided by the volume V. + Number of donor levels per volume. + DonorDensity + DonorDensity + https://qudt.org/vocab/quantitykind/DonorDensity + https://www.wikidata.org/wiki/Q105979886 + 12-29.4 + Number of donor levels per volume. + + + + + + + A coarse dispersion of gas in a solid continuum phase. + SolidGasSuspension + SolidGasSuspension + A coarse dispersion of gas in a solid continuum phase. - + - T+1 L+1 M0 I0 Θ+1 N0 J0 + T-3 L+2 M+1 I-2 Θ0 N0 J0 - LengthTimeTemperatureUnit - LengthTimeTemperatureUnit - - - - - - Quantities categorised according to ISO 80000-8. - AcousticQuantity - AcousticQuantity - Quantities categorised according to ISO 80000-8. + ElectricResistanceUnit + ElectricResistanceUnit - + + - - + - Mass increment per time. - MassChangeRate - MassChangeRate - https://www.wikidata.org/wiki/Q92020547 - 4-30.3 - Mass increment per time. + Number of ions per volume. + IonNumberDensity + IonDensity + IonNumberDensity + https://www.wikidata.org/wiki/Q98831218 + 10-62.2 + Number of ions per volume. - - + + + - Quotient of the magnetic dipole moment of an atom, and the product of the nuclear spin quantum number and the nuclear magneton. - GFactorOfNucleusOrNuclearParticle - NuclearGFactor - GFactorOfNucleusOrNuclearParticle - https://qudt.org/vocab/quantitykind/GFactorOfNucleus - https://www.wikidata.org/wiki/Q97591250 - 10-14.2 - Quotient of the magnetic dipole moment of an atom, and the product of the nuclear spin quantum number and the nuclear magneton. + Differential quotient of q with respect to l, where q is the average total charge of all positive ions produced by an ionizing charged particle over a path l, divided by the elementary charge. + LinearIonization + LinearIonization + https://qudt.org/vocab/quantitykind/LinearIonization + https://www.wikidata.org/wiki/Q98690755 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-03-115 + 10-58 + Differential quotient of q with respect to l, where q is the average total charge of all positive ions produced by an ionizing charged particle over a path l, divided by the elementary charge. - - - - Auger electron spectroscopy (AES or simply Auger) is a surface analysis technique that uses an electron beam to excite electrons on atoms in the particle. Atoms that are excited by the electron beam can emit “Auger” electrons. AES measures the kinetic energies of the emitted electrons. The energy of the emitted electrons is characteristic of elements present at the surface and near the surface of a sample. - - ScanningAugerElectronMicroscopy - AES - ScanningAugerElectronMicroscopy - Auger electron spectroscopy (AES or simply Auger) is a surface analysis technique that uses an electron beam to excite electrons on atoms in the particle. Atoms that are excited by the electron beam can emit “Auger” electrons. AES measures the kinetic energies of the emitted electrons. The energy of the emitted electrons is characteristic of elements present at the surface and near the surface of a sample. + + + + Magnitude of the angular velocity ω divided by the angle 2π, thus n = |ω|/2π. + RotationalFrequency + RotationalFrequency + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-01-42 + 3-17.2 + Magnitude of the angular velocity ω divided by the angle 2π, thus n = |ω|/2π. - - + + + + + T+1 L-2 M0 I0 Θ0 N0 J+1 + + + + + IlluminanceTimeUnit + IlluminanceTimeUnit + + + + + + FormingFromPulp + FormingFromPulp + + + + + - + - For the dissociation of a salt AmBn → mA + nB, the solubility product is KSP = am(A) ⋅ an(B), where a is ionic activity and m and n are the stoichiometric numbers. - product of the ion activities of the ions resulting from the dissociation of a solute in a saturated solution, raised to powers equal to their stoichiometric numbers. - SolubilityProduct - SolubilityProductConstant - SolubilityProduct - https://www.wikidata.org/wiki/Q11229788 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-01-23 - product of the ion activities of the ions resulting from the dissociation of a solute in a saturated solution, raised to powers equal to their stoichiometric numbers. - https://doi.org/10.1351/goldbook.S05742 - - - - - - MaterialRelationComputation - MaterialRelationComputation + The name “thermal resistance” and the symbol R are used in building technology to designate thermal insulance. + Thermodynamic temperature difference divided by heat flow rate. + ThermalResistance + ThermalResistance + https://qudt.org/vocab/quantitykind/ThermalResistance + https://www.wikidata.org/wiki/Q899628 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-45 + 5-12 + Thermodynamic temperature difference divided by heat flow rate. - - - - An interpreter who assigns a name to an object without any motivations related to the object characters. - Namer - Namer - An interpreter who assigns a name to an object without any motivations related to the object characters. + + + + + DifferentialRefractiveIndex + DifferentialRefractiveIndex - - + + + - - T0 L-2 M0 I0 Θ0 N+1 J0 + + = - - - - AmountPerAreaUnit - AmountPerAreaUnit + + + The equals symbol. + Equals + Equals + The equals symbol. - + - Near edge X-ray absorption fine structure (NEXAFS), also known as X-ray absorption near edge structure (XANES), is a type of absorption spectroscopy that indicates the features in the X-ray absorption spectra (XAS) of condensed matter due to the photoabsorption cross section for electronic transitions from an atomic core level to final states in the energy region of 50–100 eV above the selected atomic core level ionization energy, where the wavelength of the photoelectron is larger than the interatomic distance between the absorbing atom and its first neighbour atoms. + Nuclear magnetic resonance spectroscopy, most commonly known as NMR spectroscopy or magnetic resonance spectroscopy (MRS), is a spectroscopic technique to observe local magnetic fields around atomic nuclei. This spectroscopy is based on the measurement of absorption of electromagnetic radiations in the radio frequency region from roughly 4 to 900 MHz. Absorption of radio waves in the presence of magnetic field is accompanied by a special type of nuclear transition, and for this reason, such type of spectroscopy is known as Nuclear Magnetic Resonance Spectroscopy. The sample is placed in a magnetic field and the NMR signal is produced by excitation of the nuclei sample with radio waves into nuclear magnetic resonance, which is detected with sensitive radio receivers. The intramolecular magnetic field around an atom in a molecule changes the resonance frequency, thus giving access to details of the electronic structure of a molecule and its individual functional groups. As the fields are unique or highly characteristic to individual compounds, in modern organic chemistry practice, NMR spectroscopy is the definitive method to identify monomolecular organic compounds. - Nexafs - Nexafs - Near edge X-ray absorption fine structure (NEXAFS), also known as X-ray absorption near edge structure (XANES), is a type of absorption spectroscopy that indicates the features in the X-ray absorption spectra (XAS) of condensed matter due to the photoabsorption cross section for electronic transitions from an atomic core level to final states in the energy region of 50–100 eV above the selected atomic core level ionization energy, where the wavelength of the photoelectron is larger than the interatomic distance between the absorbing atom and its first neighbour atoms. + NuclearMagneticResonance + Magnetic resonance spectroscopy (MRS) + NMR + NuclearMagneticResonance + Nuclear magnetic resonance spectroscopy, most commonly known as NMR spectroscopy or magnetic resonance spectroscopy (MRS), is a spectroscopic technique to observe local magnetic fields around atomic nuclei. This spectroscopy is based on the measurement of absorption of electromagnetic radiations in the radio frequency region from roughly 4 to 900 MHz. Absorption of radio waves in the presence of magnetic field is accompanied by a special type of nuclear transition, and for this reason, such type of spectroscopy is known as Nuclear Magnetic Resonance Spectroscopy. The sample is placed in a magnetic field and the NMR signal is produced by excitation of the nuclei sample with radio waves into nuclear magnetic resonance, which is detected with sensitive radio receivers. The intramolecular magnetic field around an atom in a molecule changes the resonance frequency, thus giving access to details of the electronic structure of a molecule and its individual functional groups. As the fields are unique or highly characteristic to individual compounds, in modern organic chemistry practice, NMR spectroscopy is the definitive method to identify monomolecular organic compounds. - - - - - RedStrangeAntiQuark - RedStrangeAntiQuark + + + + + A fluid in which a gas is ionized to a level where its electrical conductivity allows long-range electric and magnetic fields to dominate its behaviour. + Plasma + Plasma + A fluid in which a gas is ionized to a level where its electrical conductivity allows long-range electric and magnetic fields to dominate its behaviour. - + + + + Galvanizing + Galvanizing + + + - T-4 L+3 M+1 I-2 Θ0 N0 J0 + T0 L0 M0 I0 Θ+2 N0 J0 - InversePermittivityUnit - InversePermittivityUnit - - - - - - - BlueUpQuark - BlueUpQuark - - - - - - Parameter used for the sample preparation process - - SamplePreparationParameter - SamplePreparationParameter - Parameter used for the sample preparation process - - - - - - A relation which makes a non-equal comparison between two numbers or other mathematical expressions. - Inequality - Inequality - A relation which makes a non-equal comparison between two numbers or other mathematical expressions. - f(x) > 0 - - - - - - GluonType3 - GluonType3 - - - - - - - GreenUpQuark - GreenUpQuark - - - - - - - - - + SquareTemperatureUnit + SquareTemperatureUnit + + + + - - + + T+3 L-2 M-1 I0 Θ+1 N0 J0 - + + - "In the name “amount of substance”, the word “substance” will typically be replaced by words to specify the substance concerned in any particular application, for example “amount of hydrogen chloride, HCl”, or “amount of benzene, C6H6 ”. It is important to give a precise definition of the entity involved (as emphasized in the definition of the mole); this should preferably be done by specifying the molecular chemical formula of the material involved. Although the word “amount” has a more general dictionary definition, the abbreviation of the full name “amount of substance” to “amount” may be used for brevity." - --- SI Brochure - The number of elementary entities present. - AmountOfSubstance - AmountOfSubstance - http://qudt.org/vocab/quantitykind/AmountOfSubstance - 9-2 - The number of elementary entities present. - https://doi.org/10.1351/goldbook.A00297 + ThermalResistanceUnit + ThermalResistanceUnit - - - + + - - - - - - + + T+2 L-5 M-1 I0 Θ0 N0 J0 - + + - Since the nucleus account for nearly all of the total mass of atoms (with the electrons and nuclear binding energy making minor contributions), the atomic mass measured in Da has nearly the same value as the mass number. - The atomic mass is often expressed as an average of the commonly found isotopes. - The mass of an atom in the ground state. - AtomicMass - AtomicMass - The mass of an atom in the ground state. - 10-4.1 - https://en.wikipedia.org/wiki/Atomic_mass - https://doi.org/10.1351/goldbook.A00496 + EnergyDensityOfStatesUnit + EnergyDensityOfStatesUnit - - - - - + + + + Process for removing unwanted residual or waste material from a given product or material + Cleaning + Cleaning + + + + - - + + - - For charged particles of a given type and energy E0 the differential quotient of E with respect to x, where E is the mean energy lost by the charged particles in traversing a distance x in the given material. - TotalLinearStoppingPower - LinearStoppingPower - TotalLinearStoppingPower - https://qudt.org/vocab/quantitykind/TotalLinearStoppingPower - https://www.wikidata.org/wiki/Q908474 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-27 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-12-49 - 10-54 - For charged particles of a given type and energy E0 the differential quotient of E with respect to x, where E is the mean energy lost by the charged particles in traversing a distance x in the given material. - https://doi.org/10.1351/goldbook.S06035 - + + 'Existent' is the EMMO class to be used for representing real world physical objects under a reductionistic perspective (i.e. objects come from the composition of sub-part objects, both in time and space). - - - - A set of reasons or a logical basis for a decision or belief - Rationale - Rationale - A set of reasons or a logical basis for a decision or belief +'Existent' class collects all individuals that stand for physical objects that can be structured in well defined temporal sub-parts called states, through the temporal direct parthood relation. + +This class provides a first granularity hierarchy in time, and a way to axiomatize tessellation principles for a specific whole with a non-transitivity relation (direct parthood) that helps to retain the granularity levels. + +e.g. a car, a supersaturated gas with nucleating nanoparticles, an atom that becomes ionized and then recombines with an electron. + A 'Physical' which is a tessellation of 'State' temporal direct parts. + An 'Existent' individual stands for a real world object for which the ontologist wants to provide univocal tessellation in time. + +By definition, the tiles are represented by 'State'-s individual. + +Tiles are related to the 'Existent' through temporal direct parthood, enforcing non-transitivity and inverse-functionality. + Being hasTemporalDirectPart a proper parthood relation, there cannot be 'Existent' made of a single 'State'. + +Moreover, due to inverse functionality, a 'State' can be part of only one 'Existent', preventing overlapping between 'Existent'-s. + Existent + true + Existent + A 'Physical' which is a tessellation of 'State' temporal direct parts. - - - + + + - Average number of fission neutrons, both prompt and delayed, emitted per neutron absorbed in a fissionable nuclide or in a nuclear fuel, as specified. - NeutronYieldPerAbsorption - NeutronYieldPerAbsorption - https://qudt.org/vocab/quantitykind/NeutronYieldPerAbsorption - https://www.wikidata.org/wiki/Q99159075 - 10-74.2 - Average number of fission neutrons, both prompt and delayed, emitted per neutron absorbed in a fissionable nuclide or in a nuclear fuel, as specified. + IsothermalCompressibility + IsothermalCompressibility + https://qudt.org/vocab/quantitykind/IsothermalCompressibility + https://www.wikidata.org/wiki/Q2990696 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-31 + 5-5.1 - - - - A causal interaction is a fundamental causal system that is expressed as a complete bupartite directed graph K(m,n), when m=n. - CausalInteraction - CausalInteraction - A causal interaction is a fundamental causal system that is expressed as a complete bupartite directed graph K(m,n), when m=n. + + + + Vector quantity from the origin of a coordinate system to a point in space. + PositionVector + PositionVector + https://www.wikidata.org/wiki/Q192388 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=102-03-15 + https://dbpedia.org/page/Position_(geometry) + 3-1.10 + Vector quantity from the origin of a coordinate system to a point in space. + https://en.wikipedia.org/wiki/Position_(geometry) - - - - The sample after having been subjected to a characterization process - - CharacterisedSample - CharacterisedSample - The sample after having been subjected to a characterization process + + + + + A physical constant relating energy at the individual particle level with temperature. It is the gas constant R divided by the Avogadro constant. + +It defines the Kelvin unit in the SI system. + The DBpedia definition (http://dbpedia.org/page/Boltzmann_constant) is outdated as May 20, 2019. It is now an exact quantity. + BoltzmannConstant + BoltzmannConstant + http://qudt.org/vocab/constant/BoltzmannConstant + A physical constant relating energy at the individual particle level with temperature. It is the gas constant R divided by the Avogadro constant. + +It defines the Kelvin unit in the SI system. + https://doi.org/10.1351/goldbook.B00695 - - + + - PorcelainOrCeramicCasting - PorcelainOrCeramicCasting + FlameCutting + FlameCutting - - - - - Quantity characterizing the variation with thermodynamic temperature T of the volume V of a body, under given conditions. - alpha_V = (1/V) * (dV/dT) - CubicExpansionCoefficient - CubicExpansionCoefficient - https://qudt.org/vocab/quantitykind/CubicExpansionCoefficient - https://www.wikidata.org/wiki/Q74761076 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-28 - 5-3.2 - Quantity characterizing the variation with thermodynamic temperature T of the volume V of a body, under given conditions. + + + + + GreenUpAntiQuark + GreenUpAntiQuark - - + - - - + + + In an infinite medium, the quotient of the number of thermal neutrons absorbed in a fissionable nuclide or in a nuclear fuel, as specified, and the total number of thermal neutrons absorbed. + ThermalUtilizationFactor + ThermalUtilizationFactor + https://qudt.org/vocab/quantitykind/ThermalUtilizationFactor + https://www.wikidata.org/wiki/Q99197650 + 10-76 + In an infinite medium, the quotient of the number of thermal neutrons absorbed in a fissionable nuclide or in a nuclear fuel, as specified, and the total number of thermal neutrons absorbed. + + + + - - + + T+7 L-3 M-2 I+3 Θ0 N0 J0 - + + - Quotient of the mean rate of production of particles in a volume, and that volume. - ParticleSourceDensity - ParticleSourceDensity - https://qudt.org/vocab/quantitykind/ParticleSourceDensity - https://www.wikidata.org/wiki/Q98915762 - 10-66 - Quotient of the mean rate of production of particles in a volume, and that volume. + CubicElectricChargeLengthPerSquareEnergyUnit + CubicElectricChargeLengthPerSquareEnergyUnit - - - - LowPressureCasting - LowPressureCasting + + + + Ruby + Ruby + + + + + + + T-2 L+1 M+1 I-2 Θ0 N0 J0 + + + + + PermeabilityUnit + PermeabilityUnit - - - - DieCasting - DieCasting + + + + + Discrete quantity; number of entities of a given kind in a system. + NumberOfEntities + NumberOfEntities + https://www.wikidata.org/wiki/Q614112 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=112-01-09 + 9-1 + Discrete quantity; number of entities of a given kind in a system. + https://doi.org/10.1351/goldbook.N04266 - - - - A computational application that uses existing data to predict the behaviour of a system without providing a identifiable analogy with the original object. - DataBasedSimulationSoftware - DataBasedSimulationSoftware - A computational application that uses existing data to predict the behaviour of a system without providing a identifiable analogy with the original object. + + + + + Cut-off angular frequency in the Debye model of the vibrational spectrum of a solid. + DebyeAngularFrequency + DebyeAngularFrequency + https://qudt.org/vocab/quantitykind/DebyeAngularFrequency + https://www.wikidata.org/wiki/Q105580986 + 12-10 + Cut-off angular frequency in the Debye model of the vibrational spectrum of a solid. - + - T-3 L+1 M+1 I0 Θ0 N0 J0 + T0 L-2 M+1 I0 Θ+1 N0 J0 - MassLengthPerCubicTimeUnit - MassLengthPerCubicTimeUnit + TemperatureMassPerAreaUnit + TemperatureMassPerAreaUnit - + + + + Data resulting of a pre-processing of raw data, applying corrections to normalize/harmonize, in order to prepare them for the post-processing. + + PrimaryData + PrimaryData + Data resulting of a pre-processing of raw data, applying corrections to normalize/harmonize, in order to prepare them for the post-processing. + Baseline subtraction + Noise reduction + X and Y axes correction + + + + + + + Radius of the circular movement of an electrically charged particle in a magnetic field. + Gyroradius + LarmorRadius + Gyroradius + https://www.wikidata.org/wiki/Q1194458 + 10-17 + Radius of the circular movement of an electrically charged particle in a magnetic field. + + + - T+2 L0 M-1 I+1 Θ0 N0 J0 + T-6 L+4 M+2 I-2 Θ0 N0 J0 - ElectricMobilityUnit - ElectricMobilityUnit + LorenzNumberUnit + LorenzNumberUnit - - + + + + + CriticalAndSupercriticalChromatography + CriticalAndSupercriticalChromatography + + + + + - Measure of the opposition that a circuit presents to a current when a voltage is applied. - ElectricImpedance - Impedance - ElectricImpedance - http://qudt.org/vocab/quantitykind/Impedance - https://www.wikidata.org/wiki/Q179043 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-43 - 6-51.1 - https://en.wikipedia.org/wiki/Electrical_impedance + fraction of nearest-neighbour atom pairs in an Ising ferromagnet having magnetic moments in one direction, minus the fraction having magnetic moments in the opposite direction + ShortRangeOrderParameter + ShortRangeOrderParameter + https://qudt.org/vocab/quantitykind/Short-RangeOrderParameter + https://www.wikidata.org/wiki/Q105495979 + 12-5.1 + fraction of nearest-neighbour atom pairs in an Ising ferromagnet having magnetic moments in one direction, minus the fraction having magnetic moments in the opposite direction - - - - - - - - - - - - Coupled - Coupled + + + + ThermomechanicalTreatment + ThermomechanicalTreatment - - - - - - + + + + Direct coulometry at controlled current is usually carried out in convective mass transfer mode. The end-point of the electrolysis, at which the current is stopped, must be determined either from the inflection point in the E–t curve or by using visual or objective end-point indi- cation, similar to volumetric methods. The total electric charge is calculated as the product of the constant current and time of electrolysis or can be measured directly using a coulometer. + The advantage of this method is that the electric charge consumed during the electrode reaction is directly proportional to the electrolysis time. Care must be taken to avoid the potential region where another electrode reaction may occur. + coulometry at an imposed, constant current in the electrochemical cell + + DirectCoulometryAtControlledCurrent + DirectCoulometryAtControlledCurrent + coulometry at an imposed, constant current in the electrochemical cell + + + + - - + + T-1 L0 M+1 I0 Θ0 N0 J0 - + + - 1/12 of the mass of an atom of the nuclide 12C in the ground state at rest. - UnifiedAtomicMassConstant - UnifiedAtomicMassConstant - https://www.wikidata.org/wiki/Q4817337 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-05-23 - 10-4.3 - 1/12 of the mass of an atom of the nuclide 12C in the ground state at rest. - https://doi.org/10.1351/goldbook.A00497 + MassPerTimeUnit + MassPerTimeUnit - - - + + - ElementaryBoson - ElementaryBoson + GluonType5 + GluonType5 - + - - + - Difference between the mass of an atom, and the product of its mass number and the unified mass constant. - MassExcess - MassExcess - https://qudt.org/vocab/quantitykind/MassExcess - https://www.wikidata.org/wiki/Q1571163 - 10-21.1 - Difference between the mass of an atom, and the product of its mass number and the unified mass constant. - https://doi.org/10.1351/goldbook.M03719 + Axial vector quantity describing the rotation around an axis, with magnitude ω=|dφ/dt|, where dφ is the plane angle change during the infinitesimal time interval with duration dt, and with direction along the axis for which the rotation is clockwise. + AngularVelocity + AngularVelocity + https://qudt.org/vocab/quantitykind/AngularVelocity + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-01-41 + https://dbpedia.org/page/Angular_velocity + 3-12 + Axial vector quantity describing the rotation around an axis, with magnitude ω=|dφ/dt|, where dφ is the plane angle change during the infinitesimal time interval with duration dt, and with direction along the axis for which the rotation is clockwise. + https://en.wikipedia.org/wiki/Angular_velocity - - + + + + + T+2 L+2 M0 I0 Θ0 N0 J0 + + + - RMS value voltage multiplied by rms value of electric current. - ApparentPower - ApparentPower - https://qudt.org/vocab/quantitykind/ApparentPower - https://www.wikidata.org/wiki/Q1930258 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-11-41 - 6-57 - RMS value voltage multiplied by rms value of electric current. - - - - - - Dielectric spectroscopy (DS) or impedance spectroscopy, also known as electrochemical impedance spectroscopy, is frequently used to study the response of a sample subjected to an applied electric field of fixed or changing frequency. DS describes the dielectric properties of a material as a function of frequency. In DS, the radio and microwave frequency regions of the electromagnetic spectrum have been successfully made to interact with materials, so as to study the behavior of molecules. The interaction of applied alternating electric fields with dipoles possessing reorientation mobility in materials is also dealt by DS. - - DielectricAndImpedanceSpectroscopy - DielectricAndImpedanceSpectroscopy - Dielectric spectroscopy (DS) or impedance spectroscopy, also known as electrochemical impedance spectroscopy, is frequently used to study the response of a sample subjected to an applied electric field of fixed or changing frequency. DS describes the dielectric properties of a material as a function of frequency. In DS, the radio and microwave frequency regions of the electromagnetic spectrum have been successfully made to interact with materials, so as to study the behavior of molecules. The interaction of applied alternating electric fields with dipoles possessing reorientation mobility in materials is also dealt by DS. - - - - - - A property that is associated to an object by convention, or assumption. - A quantitative property attributed by agreement to a quantity for a given purpose. - ConventionalProperty - ConventionalProperty - A quantitative property attributed by agreement to a quantity for a given purpose. - The thermal conductivity of a copper sample in my laboratory can be assumed to be the conductivity that appears in the vendor specification. This value has been obtained by measurement of a sample which is not the one I have in my laboratory. This conductivity value is then a conventional quantitiative property assigned to my sample through a semiotic process in which no actual measurement is done by my laboratory. - -If I don't believe the vendor, then I can measure the actual thermal conductivity. I then perform a measurement process that semiotically assign another value for the conductivity, which is a measured property, since is part of a measurement process. - -Then I have two different physical quantities that are properties thanks to two different semiotic processes. - - - - - - According to UPAC Compendium of Chemical Terminology, a “signal” is “A representation of a quantity within an analytical instrument” (https://goldbook.iupac.org/terms/view/S05661 ). - Result (effect) of the interaction between the sample and the probe, which usually is a measurable and quantifiable quantity. - Signal is usually emitted from a characteristic “emission” volume, which can be different from the sample/probe “interaction” volume and can be usually quantified using proper physics equations and/or modelling of the interaction mechanisms. - - Signal - Signal - According to UPAC Compendium of Chemical Terminology, a “signal” is “A representation of a quantity within an analytical instrument” (https://goldbook.iupac.org/terms/view/S05661 ). - Result (effect) of the interaction between the sample and the probe, which usually is a measurable and quantifiable quantity. - Signal is usually emitted from a characteristic “emission” volume, which can be different from the sample/probe “interaction” volume and can be usually quantified using proper physics equations and/or modelling of the interaction mechanisms. - - - - - - GluonType8 - GluonType8 + AreaSquareTimeUnit + AreaSquareTimeUnit - - - - Filling - Filling + + + + Parameter for diffusion and fluid flow in porous media. + Tortuosity + Tortuosity + https://www.wikidata.org/wiki/Q2301683 + Parameter for diffusion and fluid flow in porous media. - - + + + + + Radius of a sphere such that the relativistic electron energy is distributed uniformly. + ElectronRadius + ElectronRadius + https://www.wikidata.org/wiki/Q2152581 + 10-19.2 + Radius of a sphere such that the relativistic electron energy is distributed uniformly. + + + + + + + - - - 1 + + + + In nuclear physics, product of the number density of atoms of a given type and the cross section. + VolumicCrossSection + MacroscopicCrossSection + VolumicCrossSection + https://qudt.org/vocab/quantitykind/MacroscopicCrossSection + https://www.wikidata.org/wiki/Q98280520 + 10-42.1 + In nuclear physics, product of the number density of atoms of a given type and the cross section. + https://doi.org/10.1351/goldbook.M03674 + + + + + + + - - - 2 + + - - A positive charged subatomic particle found in the atomic nucleus. - Proton - Proton - A positive charged subatomic particle found in the atomic nucleus. - https://en.wikipedia.org/wiki/Proton + + Reciprocal of the coefficient of heat transfer. + ThermalInsulance + CoefficientOfThermalInsulance + ThermalInsulance + https://qudt.org/vocab/quantitykind/ThermalInsulance + https://www.wikidata.org/wiki/Q2596212 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-41 + 5-11 + Reciprocal of the coefficient of heat transfer. - - - - FunctionallyDefinedMaterial - FunctionallyDefinedMaterial + + + + + T0 L+2 M0 I0 Θ-1 N0 J0 + + + + + AreaPerTemperatureUnit + AreaPerTemperatureUnit - - - + + + - Quotient of electron and hole mobility. - MobilityRatio - MobilityRatio - https://qudt.org/vocab/quantitykind/MobilityRatio - https://www.wikidata.org/wiki/Q106010255 - 12-31 - Quotient of electron and hole mobility. + Equivalent to the Boltzmann constant, but expressed in units of energy per temperature increment per mole (rather than energy per temperature increment per particle). + MolarGasConstant + MolarGasConstant + http://qudt.org/vocab/constant/MolarGasConstant + 9-37.1 + Equivalent to the Boltzmann constant, but expressed in units of energy per temperature increment per mole (rather than energy per temperature increment per particle). + https://doi.org/10.1351/goldbook.G02579 - - + + + + + + + + + + + + + SpecificGasConstant + SpecificGasConstant + https://www.wikidata.org/wiki/Q94372268 + 5-26 + + + + - electrochemical method where traces of solid particles are abrasively transferred onto the surface of an electrode, followed by an electrochemical dissolution (anodic or cathodic dissolution) that is recorded as a current–voltage curve + Vapor pressure osmometry measures vapor pressure indirectly by measuring the change in temperature of a polymer solution on dilution by solvent vapor and is generally useful for polymers with Mn below 10,000–40,000 g/mol. When molecular weight is more than that limit, the quantity being measured becomes very small to detect. - AbrasiveStrippingVoltammetry - AbrasiveStrippingVoltammetry - electrochemical method where traces of solid particles are abrasively transferred onto the surface of an electrode, followed by an electrochemical dissolution (anodic or cathodic dissolution) that is recorded as a current–voltage curve + VaporPressureDepressionOsmometry + VPO + VaporPressureDepressionOsmometry + Vapor pressure osmometry measures vapor pressure indirectly by measuring the change in temperature of a polymer solution on dilution by solvent vapor and is generally useful for polymers with Mn below 10,000–40,000 g/mol. When molecular weight is more than that limit, the quantity being measured becomes very small to detect. - - - - Process for removing unwanted residual or waste material from a given product or material - Cleaning - Cleaning + + + + + T-1 L-2 M0 I0 Θ0 N+1 J0 + + + + + AmountPerAreaTimeUnit + AmountPerAreaTimeUnit - - - - A manufacturing process in which interchangeable parts are added to a product in a sequential manner to create an end product. - Is not collection, since the connection between the elements of an assembly line occurs through the flow of objects that are processed. - AssemblyLine - AssemblyLine - A manufacturing process in which interchangeable parts are added to a product in a sequential manner to create an end product. + + + + Charge number that an atom within a molecule would have if all the ligands were removed along with the electron pairs that were shared. + OxidationNumber + OxidationState + OxidationNumber + https://www.wikidata.org/wiki/Q484152 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-01-25 + https://dbpedia.org/page/Oxidation_state + Charge number that an atom within a molecule would have if all the ligands were removed along with the electron pairs that were shared. + https://en.wikipedia.org/wiki/Oxidation_state + https://doi.org/10.1351/goldbook.O04363 - - + + + - - + + - - Force per unit oriented surface area . - Measure of the internal forces that neighboring particles of a continuous material exert on each other. - Stress - Stress - http://qudt.org/vocab/quantitykind/Stress - 4-15 + + In computing, a computer file is a resource for recording data on a computer storage device, primarily identified by its file path. + File + File + In computing, a computer file is a resource for recording data on a computer storage device, primarily identified by its file path. - - - - UTF8 - UTF8 + + + + + T-4 L+2 M0 I0 Θ0 N0 J0 + + + + + AreaPerQuarticTimeUnit + AreaPerQuarticTimeUnit - - - - A grammar for annotating a document in a way that is syntactically distinguishable from the text. - MarkupLanguage - MarkupLanguage - A grammar for annotating a document in a way that is syntactically distinguishable from the text. - HTML - https://en.wikipedia.org/wiki/Markup_language + + + + + T+4 L-2 M-1 I+1 Θ0 N0 J0 + + + + + JosephsonConstantUnit + JosephsonConstantUnit - - + + - Ratio of area on a sphere to its radius squared. - SolidAngle - SolidAngle - http://qudt.org/vocab/quantitykind/SolidAngle - 3-6 - Ratio of area on a sphere to its radius squared. - https://doi.org/10.1351/goldbook.S05732 + Heat capacity at constant volume. + IsochoricHeatCapacity + HeatCapacityAtConstantVolume + IsochoricHeatCapacity + https://www.wikidata.org/wiki/Q112187521 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-50 + 5-16.3 + Heat capacity at constant volume. - - - - Molds - Molds + + + + + GreenTopQuark + GreenTopQuark - + + + + Python + Python + + + - T+3 L-2 M-1 I0 Θ0 N0 J+1 + T+1 L-2 M0 I+1 Θ0 N0 J0 - - LuminousEfficacyUnit - LuminousEfficacyUnit + + ElectricDisplacementFieldUnit + ElectricDisplacementFieldUnit - + + + + + + + + + + + + + z component of the diagonalized tensor of nuclear quadrupole moment, in the quantum state with the nuclear spin in the field direction (z). + NuclearQuadrupoleMoment + NuclearQuadrupoleMoment + https://qudt.org/vocab/quantitykind/NuclearQuadrupoleMoment + https://www.wikidata.org/wiki/Q97921226 + 10-18 + z component of the diagonalized tensor of nuclear quadrupole moment, in the quantum state with the nuclear spin in the field direction (z). + + + - An analytical technique used for the elemental analysis or chemical characterization of a sample. + A technique used to obtain an infrared spectrum of absorption or emission of a solid, liquid, or gas - EnergyDispersiveXraySpectroscopy - EDS - EDX - EnergyDispersiveXraySpectroscopy - https://www.wikidata.org/wiki/Q386334 - An analytical technique used for the elemental analysis or chemical characterization of a sample. - https://en.wikipedia.org/wiki/Energy-dispersive_X-ray_spectroscopy + FourierTransformInfraredSpectroscopy + FTIR + FourierTransformInfraredSpectroscopy + https://www.wikidata.org/wiki/Q901559 + A technique used to obtain an infrared spectrum of absorption or emission of a solid, liquid, or gas + https://en.wikipedia.org/wiki/Fourier-transform_infrared_spectroscopy - + + + + + T0 L0 M0 I0 Θ0 N-1 J0 + + + + + PerAmountUnit + PerAmountUnit + + + + - Factor by which the phase velocity of light is reduced in a medium. - RefractiveIndex - RefractiveIndex - http://qudt.org/vocab/quantitykind/RefractiveIndex - https://doi.org/10.1351/goldbook.R05240 + Volume of a constituent of a mixture divided by the sum of volumes of all constituents prior to mixing. + VolumeFraction + VolumeFraction + http://qudt.org/vocab/quantitykind/VolumeFraction + 9-14 + Volume of a constituent of a mixture divided by the sum of volumes of all constituents prior to mixing. + https://doi.org/10.1351/goldbook.V06643 - - + + - Profilometry is a technique used to extract topographical data from a surface. This can be a single point, a line scan or even a full three dimensional scan. The purpose of profilometry is to get surface morphology, step heights and surface roughness. + Optical microscopy is a technique used to closely view a sample through the magnification of a lens with visible light - Profilometry - Profilometry - Profilometry is a technique used to extract topographical data from a surface. This can be a single point, a line scan or even a full three dimensional scan. The purpose of profilometry is to get surface morphology, step heights and surface roughness. + OpticalMicroscopy + OpticalMicroscopy + Optical microscopy is a technique used to closely view a sample through the magnification of a lens with visible light - - - - - ResourceIdentifier - ResourceIdentifier + + + + + T0 L-3 M0 I0 Θ0 N-1 J0 + + + + + ReciprocalAmountPerVolumeUnit + ReciprocalAmountPerVolumeUnit - - - + - - - - - - - + - Volume per amount of substance. - MolarVolume - MolarVolume - https://qudt.org/vocab/quantitykind/MolarVolume - https://www.wikidata.org/wiki/Q487112 - 9-5 - Volume per amount of substance. + MicrocanonicalPartitionFunction + MicrocanonicalPartitionFunction + https://qudt.org/vocab/quantitykind/MicroCanonicalPartitionFunction + https://www.wikidata.org/wiki/Q96106546 + 9-35.1 - - - - A law that provides a connection between a material property and other properties of the object. - MaterialLaw - MaterialLaw - A law that provides a connection between a material property and other properties of the object. + + + + A liquid aerosol composed of water droplets in air or another gas. + Vapor + Vapor + A liquid aerosol composed of water droplets in air or another gas. - - + + - In condensed matter physics, position vector of an atom or ion relative to its equilibrium position. - DisplacementVector - DisplacementVector - https://qudt.org/vocab/quantitykind/DisplacementVectorOfIon - https://www.wikidata.org/wiki/Q105533558 - 12-7.3 - In condensed matter physics, position vector of an atom or ion relative to its equilibrium position. + Number of holes in valence band per volume. + HoleDensity + HoleDensity + https://qudt.org/vocab/quantitykind/HoleDensity + https://www.wikidata.org/wiki/Q105971101 + 12-29.2 + Number of holes in valence band per volume. - + + + + + The final step of a workflow. + There may be more than one end task, if they run in parallel leading to more than one output. + EndStep + EndStep + The final step of a workflow. + There may be more than one end task, if they run in parallel leading to more than one output. + + + + + + Fabrication of objects through the deposition of a material using a print head, nozzle or another printer technology. + This term is often used in a non-technical context synonymously with additive manufacturing and, in these cases, typically associated with machines used for non-industrial purposes including personal use. + fabrication of objects through the deposition of a material using a print head, nozzle or another printer technology +Note 1 to entry: This term is often used in a non-technical context synonymously with additive manufacturing (3.1.2) and, in these cases, typically associated with machines used for non-industrial purposes including personal use. + 3DPrinting + 3DPrinting + Fabrication of objects through the deposition of a material using a print head, nozzle or another printer technology. + This term is often used in a non-technical context synonymously with additive manufacturing and, in these cases, typically associated with machines used for non-industrial purposes including personal use. + + + - T+3 L-3 M-1 I+2 Θ0 N-1 J0 + T+4 L0 M-1 I+2 Θ0 N0 J0 - ElectricConductivityPerAmountUnit - ElectricConductivityPerAmountUnit + SquareCurrentQuarticTimePerMassUnit + SquareCurrentQuarticTimePerMassUnit - - + + + + + T+2 L-2 M-1 I+2 Θ0 N0 J0 + + + - The analytical composition of a saturated solution, expressed in terms of the proportion of a designated solute in a designated solvent, is the solubility of that solute. - The solubility may be expressed as a concentration, molality, mole fraction, mole ratio, etc. - Solubility - Solubility - https://www.wikidata.org/wiki/Q170731 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-01-15 - The analytical composition of a saturated solution, expressed in terms of the proportion of a designated solute in a designated solvent, is the solubility of that solute. - https://doi.org/10.1351/goldbook.S05740 + MagneticReluctanceUnit + MagneticReluctanceUnit + + + + + + ElectroSinterForging + ElectroSinterForging + + + + + + + CharacterisationEnvironmentProperty + CharacterisationEnvironmentProperty + + + + + + Data filtering is the process of examining a dataset to exclude, rearrange, or apportion data according to certain criteria. + DataFiltering + DataFiltering + Data filtering is the process of examining a dataset to exclude, rearrange, or apportion data according to certain criteria. - + - T-2 L0 M+1 I-1 Θ0 N0 J0 + T+3 L-1 M-1 I0 Θ0 N0 J+1 - - MagneticFluxDensityUnit - MagneticFluxDensityUnit - - - - - - ElectrolyticDeposition - ElectrolyticDeposition - - - - - - - SerialStep - SerialStep - - - - - - - - - - - - - - - Quotient of average drift speed imparted to a charged particle in a medium by an electric field, and the electric field strength. - Mobility - Mobility - https://qudt.org/vocab/quantitykind/Mobility - https://www.wikidata.org/wiki/Q900648 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-06-36 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-02-77 - 10-61 - Quotient of average drift speed imparted to a charged particle in a medium by an electric field, and the electric field strength. - https://doi.org/10.1351/goldbook.M03955 - - - - - - - ThermodynamicGrueneisenParameter - ThermodynamicGrueneisenParameter - https://www.wikidata.org/wiki/Q105658620 - 12-13 + + LuminousEfficacyUnit + LuminousEfficacyUnit @@ -23830,689 +23587,747 @@ Then I have two different physical quantities that are properties thanks to two Viscometry or viscosity method was one of the first methods used for determining the MW of polymers. In this method, the viscosity of polymer solution is measured, and the simplest method used is capillary viscometry by using the Ubbelohde U-tube viscometer. In this method, both the flow time of the polymer solution (t) and the flow time of the pure solvent (t0) are recorded. The ratio of the polymer solution flow time (t) to the flow time of pure solvent (t0) is equal to the ratio of their viscosities (η/η0) only if they have the same densities. - - - - - Sum of the maximum beta-particle kinetic energy and the recoil energy of the atom produced in a reference frame in which the emitting nucleus is at rest before its disintegration. - BetaDisintegrationEnergy - BetaDisintegrationEnergy - https://www.wikidata.org/wiki/Q98148340 - 10-34 - Sum of the maximum beta-particle kinetic energy and the recoil energy of the atom produced in a reference frame in which the emitting nucleus is at rest before its disintegration. + + + + Parameter used for the sample preparation process + + SamplePreparationParameter + SamplePreparationParameter + Parameter used for the sample preparation process - - - - - InjectionMolding - InjectionMolding + + + + AlgebricOperator + AlgebricOperator - - - - - In nuclear physics, fraction of interacting particles per distance traversed in a given material. - LinearAttenuationCoefficient - LinearAttenuationCoefficient - https://www.wikidata.org/wiki/Q98583077 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-04-31 - 10-49 - In nuclear physics, fraction of interacting particles per distance traversed in a given material. + + + + A real vector with 3 elements. + Shape3Vector + Shape3Vector + A real vector with 3 elements. + The quantity value of physical quantities if real space is a Shape3Vector. - - + + - Gamma-ray spectroscopy is the qualitative study of the energy spectra of gamma-ray sources, such as in the nuclear industry, geochemical investigation, and astrophysics.[1] Gamma-ray spectrometry, on the other hand, is the method used to acquire a quantitative spectrum measurement.[2] - -Most radioactive sources produce gamma rays, which are of various energies and intensities. When these emissions are detected and analyzed with a spectroscopy system, a gamma-ray energy spectrum can be produced. - -A detailed analysis of this spectrum is typically used to determine the identity and quantity of gamma emitters present in a gamma source, and is a vital tool in radiometric assay. The gamma spectrum is characteristic of the gamma-emitting nuclides contained in the source, just like in an optical spectrometer, the optical spectrum is characteristic of the material contained in a sample. - GammaSpectrometry - GammaSpectrometry - Gamma-ray spectroscopy is the qualitative study of the energy spectra of gamma-ray sources, such as in the nuclear industry, geochemical investigation, and astrophysics.[1] Gamma-ray spectrometry, on the other hand, is the method used to acquire a quantitative spectrum measurement.[2] - -Most radioactive sources produce gamma rays, which are of various energies and intensities. When these emissions are detected and analyzed with a spectroscopy system, a gamma-ray energy spectrum can be produced. - -A detailed analysis of this spectrum is typically used to determine the identity and quantity of gamma emitters present in a gamma source, and is a vital tool in radiometric assay. The gamma spectrum is characteristic of the gamma-emitting nuclides contained in the source, just like in an optical spectrometer, the optical spectrum is characteristic of the material contained in a sample. + Synchrotron + Synchrotron - - - - Numeral - Numeral + + + + + T-3 L+2 M0 I0 Θ0 N0 J0 + + + + + AbsorbedDoseRateUnit + AbsorbedDoseRateUnit - - - - Galvanizing - Galvanizing + + + + Broadcast + Broadcast - - - - - RedUpAntiQuark - RedUpAntiQuark + + + + Describes the level of expertise required to carry out a process (the entire test or the data processing). + + LevelOfExpertise + LevelOfExpertise + Describes the level of expertise required to carry out a process (the entire test or the data processing). - - - + + - Scalar or tensor quantity the product of which by the magnetic constant μ0 and by the magnetic field strength H is equal to the magnetic polarization J. - MagneticSusceptibility - MagneticSusceptibility - https://qudt.org/vocab/unit/SUSCEPTIBILITY_MAG.html - https://www.wikidata.org/wiki/Q691463 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-12-37 - 6-28 - Scalar or tensor quantity the product of which by the magnetic constant μ0 and by the magnetic field strength H is equal to the magnetic polarization J. + Specific heat capacity at saturated vaport pressure. + SpecificHeatCapacityAtSaturatedVaporPressure + SpecificHeatCapacityAtSaturatedVaporPressure + https://qudt.org/vocab/quantitykind/SpecificHeatCapacityAtSaturation + https://www.wikidata.org/wiki/Q75775005 + 5-16.4 + Specific heat capacity at saturated vaport pressure. - - - - - - + + - - + + T-3 L-3 M+1 I0 Θ0 N0 J0 - + + - Derivative of velocity with respect to time. - Acceleration - Acceleration - http://qudt.org/vocab/quantitykind/Acceleration - 3-9.1 - https://doi.org/10.1351/goldbook.A00051 + PowerPerAreaVolumeUnit + PowerPerAreaVolumeUnit - - + + - - / + + + 1 - - Division - Division - - - - - - - Displacement of one surface with respect to another divided by the distance between them. - ShearStrain - ShearStrain - https://qudt.org/vocab/quantitykind/ShearStrain - https://www.wikidata.org/wiki/Q7561704 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-59 - 4-17.3 - Displacement of one surface with respect to another divided by the distance between them. - https://doi.org/10.1351/goldbook.S05637 - - - - + - - T0 L+2 M0 I0 Θ+1 N0 J0 + + + 2 - - - - AreaTemperatureUnit - AreaTemperatureUnit + + + A positive charged subatomic particle found in the atomic nucleus. + Proton + Proton + A positive charged subatomic particle found in the atomic nucleus. + https://en.wikipedia.org/wiki/Proton - - - - Magnitude of the angular velocity ω divided by the angle 2π, thus n = |ω|/2π. - RotationalFrequency - RotationalFrequency - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-01-42 - 3-17.2 - Magnitude of the angular velocity ω divided by the angle 2π, thus n = |ω|/2π. + + + + A physics-based model based on a physics equation describing the behaviour of atoms. + AtomisticModel + AtomisticModel + A physics-based model based on a physics equation describing the behaviour of atoms. - + - - + - Differential quotient of the cross section for scattering a particle in a given direction and the solid angle around that direction. - DirectionDistributionOfCrossSection - DirectionDistributionOfCrossSection - https://qudt.org/vocab/quantitykind/AngularCrossSection - https://www.wikidata.org/wiki/Q98266630 - 10-39 - Differential quotient of the cross section for scattering a particle in a given direction and the solid angle around that direction. + Force per unit oriented surface area . + Measure of the internal forces that neighboring particles of a continuous material exert on each other. + Stress + Stress + http://qudt.org/vocab/quantitykind/Stress + 4-15 - - - - Unit for quantities of dimension one that are the fraction of two areas. - AreaFractionUnit - AreaFractionUnit - Unit for quantities of dimension one that are the fraction of two areas. - Unit for solid angle. + + + + Quantities categorised according to ISO 80000-8. + AcousticQuantity + AcousticQuantity + Quantities categorised according to ISO 80000-8. - - - - - + + + + InspectionDevice + InspectionDevice + + + + + + Calendering + Calendering + + + + - - + + * - - In nuclear physics, incident radiant energy per cross-sectional area. - EnergyFluence - EnergyFluence - https://qudt.org/vocab/quantitykind/EnergyFluence - https://www.wikidata.org/wiki/Q98538612 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-17 - 10-46 - In nuclear physics, incident radiant energy per cross-sectional area. + + Multiplication + Multiplication - + - T-3 L-3 M+1 I0 Θ0 N0 J0 + T+1 L-3 M0 I+1 Θ0 N0 J0 - PowerPerAreaVolumeUnit - PowerPerAreaVolumeUnit + ElectricChargeDensityUnit + ElectricChargeDensityUnit - - - - - T+2 L+2 M-1 I+2 Θ0 N0 J0 - - - - - EnergyPerSquareMagneticFluxDensityUnit - EnergyPerSquareMagneticFluxDensityUnit + + + + + RedCharmQuark + RedCharmQuark - - - - - T+4 L-3 M-1 I+2 Θ0 N0 J0 - - - - - PermittivityUnit - PermittivityUnit + + + + A manufacturing process in which metallic material is anodically dissolved under the influence of an electric current and an electrolyte solution. The current flow can be caused either by connection to an external current source or due to local element formation on the workpiece (etching). + SparkErosion + elektrochemisches Abtragen + SparkErosion - - - - - T-1 L+3 M0 I0 Θ0 N-1 J0 - - - - - VolumePerAmountTimeUnit - VolumePerAmountTimeUnit + + + + ChipboardManufacturing + ChipboardManufacturing - - - - - Radius of the electron orbital in the hydrogen atom in its ground state in the Bohr model of the atom. - BohrRadius - BohrRadius - https://qudt.org/vocab/constant/BohrRadius - https://www.wikidata.org/wiki/Q652571 - 10-6 - Radius of the electron orbital in the hydrogen atom in its ground state in the Bohr model of the atom. - https://doi.org/10.1351/goldbook.B00693 + + + + Dilatometry is a method for characterising the dimensional changes of materials with variation of temperature conditions. + Dilatometry + https://www.lboro.ac.uk/research/lmcc/facilities/dilatometry/#:~:text=Dilatometry%20is%20a%20method%20for,to%20mimic%20an%20industrial%20process. + Dilatometry + Dilatometry is a method for characterising the dimensional changes of materials with variation of temperature conditions. - - - + + + + + ElectronAntiNeutrino + ElectronAntiNeutrino + + + + + + Photoluminescence spectroscopy is a widely used technique for characterisation of the optical and electronic properties of semiconductors and molecules. + + PhotoluminescenceMicroscopy + PhotoluminescenceMicroscopy + Photoluminescence spectroscopy is a widely used technique for characterisation of the optical and electronic properties of semiconductors and molecules. + + + + - StaticFrictionForce - StaticFriction - StaticFrictionForce - https://qudt.org/vocab/quantitykind/StaticFriction - https://www.wikidata.org/wiki/Q90862568 - 4-9.3 + Sum of electric current and displacement current + TotalCurrent + TotalCurrent + https://qudt.org/vocab/quantitykind/TotalCurrent + https://www.wikidata.org/wiki/Q77679732 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-45 + 6-19.2 + Sum of electric current and displacement current - - - - - T-1 L+1 M0 I0 Θ0 N0 J0 - - - - - SpeedUnit - SpeedUnit + + + + + AntiMuon + AntiMuon - + + + + + RedStrangeQuark + RedStrangeQuark + + + - + - + - Measure for the energy lost by charged particles per traversed distance, including only interactions up to a given energy. - LinearEnergyTransfer - LinearEnergyTransfer - https://qudt.org/vocab/quantitykind/LinearEnergyTransfer - https://www.wikidata.org/wiki/Q1699996 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-30 - 10-85 - Measure for the energy lost by charged particles per traversed distance, including only interactions up to a given energy. - https://doi.org/10.1351/goldbook.L03550 - - - - - - ChipboardManufacturing - ChipboardManufacturing + SpecificEntropy + SpecificEntropy + https://qudt.org/vocab/quantitykind/SpecificEntropy + https://www.wikidata.org/wiki/Q69423705 + 5-19 - - + + + - Proportionality constant between the magnetic dipole moment and the angular momentum of the electron. - GyromagneticRatioOfTheElectron - GyromagneticCoefficientOfTheElectron - MagnetogyricRatioOfTheElectron - GyromagneticRatioOfTheElectron - https://www.wikidata.org/wiki/Q97543076 - 10-12.2 - Proportionality constant between the magnetic dipole moment and the angular momentum of the electron. + StatisticalWeightOfSubsystem + StatisticalWeightOfSubsystem + https://www.wikidata.org/wiki/Q96207431 + 9-36.1 - + - T-3 L+1 M+1 I-1 Θ0 N0 J0 + T-3 L0 M+1 I0 Θ-4 N0 J0 - ElectricFieldStrengthUnit - ElectricFieldStrengthUnit + MassPerCubicTimeQuarticTemperatureUnit + MassPerCubicTimeQuarticTemperatureUnit - - - - - T0 L-3 M0 I+1 Θ0 N-1 J0 - - - - - ElectricCurrentPerAmountVolumeUnit - ElectricCurrentPerAmountVolumeUnit + + + + Fractography is the study of fracture surfaces in order to determine the relation between the microstructure and the mechanism(s) of crack initiation and propagation and, eventually, the root cause of the fracture .Fractography qualitatively interprets the mechanisms of fracture that occur in a sample by microscopic examination of fracture surface morpholog. + + Fractography + Fractography + Fractography is the study of fracture surfaces in order to determine the relation between the microstructure and the mechanism(s) of crack initiation and propagation and, eventually, the root cause of the fracture .Fractography qualitatively interprets the mechanisms of fracture that occur in a sample by microscopic examination of fracture surface morpholog. - - - - - Angular frequency of the electron angular momentum vector precession about the axis of an external magnetic field. - LarmonAngularFrequency - LarmonAngularFrequency - 10-15.1 - Angular frequency of the electron angular momentum vector precession about the axis of an external magnetic field. + + + + Raman spectroscopy (/ˈrɑːmən/) (named after physicist C. V. Raman) is a spectroscopic technique typically used to determine vibrational modes of molecules, although rotational and other low-frequency modes of systems may also be observed. Raman spectroscopy is commonly used in chemistry to provide a structural fingerprint by which molecules can be identified. + +Raman spectroscopy relies upon inelastic scattering of photons, known as Raman scattering. A source of monochromatic light, usually from a laser in the visible, near infrared, or near ultraviolet range is used, although X-rays can also be used. The laser light interacts with molecular vibrations, phonons or other excitations in the system, resulting in the energy of the laser photons being shifted up or down. The shift in energy gives information about the vibrational modes in the system. Infrared spectroscopy typically yields similar yet complementary information. + +Typically, a sample is illuminated with a laser beam. Electromagnetic radiation from the illuminated spot is collected with a lens and sent through a monochromator. Elastic scattered radiation at the wavelength corresponding to the laser line (Rayleigh scattering) is filtered out by either a notch filter, edge pass filter, or a band pass filter, while the rest of the collected light is dispersed onto a detector. + + RamanSpectroscopy + RamanSpectroscopy + Raman spectroscopy (/ˈrɑːmən/) (named after physicist C. V. Raman) is a spectroscopic technique typically used to determine vibrational modes of molecules, although rotational and other low-frequency modes of systems may also be observed. Raman spectroscopy is commonly used in chemistry to provide a structural fingerprint by which molecules can be identified. + +Raman spectroscopy relies upon inelastic scattering of photons, known as Raman scattering. A source of monochromatic light, usually from a laser in the visible, near infrared, or near ultraviolet range is used, although X-rays can also be used. The laser light interacts with molecular vibrations, phonons or other excitations in the system, resulting in the energy of the laser photons being shifted up or down. The shift in energy gives information about the vibrational modes in the system. Infrared spectroscopy typically yields similar yet complementary information. + +Typically, a sample is illuminated with a laser beam. Electromagnetic radiation from the illuminated spot is collected with a lens and sent through a monochromator. Elastic scattered radiation at the wavelength corresponding to the laser line (Rayleigh scattering) is filtered out by either a notch filter, edge pass filter, or a band pass filter, while the rest of the collected light is dispersed onto a detector. - - - - - T+4 L-2 M-1 I+2 Θ0 N0 J0 - - - - - CapacitanceUnit - CapacitanceUnit + + + + + The sample after a preparation process. + + PreparedSample + PreparedSample + The sample after a preparation process. - + + + + + RawSample + RawSample + + + + + + Letter + Letter + + + + + + A logarithmic unit is a unit that can be used to express a quantity (physical or mathematical) on a logarithmic scale, that is, as being proportional to the value of a logarithm function applied to the ratio of the quantity and a reference quantity of the same type. + Note that logarithmic units like decibel or neper are not univocally defines, since their definition depends on whether they are used to measure a "power" or a "root-power" quantity. + +It is advisory to create a uniquely defined subclass these units for concrete usage. + LogarithmicUnit + LogarithmicUnit + http://qudt.org/schema/qudt/LogarithmicUnit + A logarithmic unit is a unit that can be used to express a quantity (physical or mathematical) on a logarithmic scale, that is, as being proportional to the value of a logarithm function applied to the ratio of the quantity and a reference quantity of the same type. + Decibel + Note that logarithmic units like decibel or neper are not univocally defines, since their definition depends on whether they are used to measure a "power" or a "root-power" quantity. + +It is advisory to create a uniquely defined subclass these units for concrete usage. + https://en.wikipedia.org/wiki/Logarithmic_scale#Logarithmic_units + + + - T-1 L+2 M+1 I0 Θ0 N0 J0 + T-3 L+2 M+1 I0 Θ-1 N0 J0 - - AngularMomentumUnit - AngularMomentumUnit - - - - - - StoichiometricNumberOfSubstance - StoichiometricNumberOfSubstance - https://qudt.org/vocab/quantitykind/StoichiometricNumber - https://www.wikidata.org/wiki/Q95443720 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-01-22 - 9-29 - https://doi.org/10.1351/goldbook.S06025 + ThermalConductanceUnit + ThermalConductanceUnit - - - - A estimation of a property by a criteria based on the pre-existing knowledge of the estimator. - Assignment - Assignment - A estimation of a property by a criteria based on the pre-existing knowledge of the estimator. - The Argon gas in my bottle has ionisation energy of 15.7596 eV. This is not measured but assigned to this material by previous knowledge. + + + + + Sum of the product of the proton number and the hydrogen atomic mass, and the neutron rest mass, minus the rest mass of the atom. + MassDefect + MassDefect + https://qudt.org/vocab/quantitykind/MassDefect + https://www.wikidata.org/wiki/Q26897126 + 10-21.2 + Sum of the product of the proton number and the hydrogen atomic mass, and the neutron rest mass, minus the rest mass of the atom. - - - - ElectroSinterForging - ElectroSinterForging + + + + + ThermodynamicEfficiency + ThermalEfficiency + ThermodynamicEfficiency + https://qudt.org/vocab/quantitykind/ThermalEfficiency + https://www.wikidata.org/wiki/Q1452104 + 5-25.1 - - - - - + + + + - - + + + + The 'semiosis' process of interpreting a 'physical' and provide a complec sign, 'theory' that stands for it and explain it to another interpreter. + Theorisation + Theorization + Theorisation + The 'semiosis' process of interpreting a 'physical' and provide a complec sign, 'theory' that stands for it and explain it to another interpreter. + + + + + - An electric dipole, vector quantity of magnitude equal to the product of the positive charge and the distance between the charges and directed from the negative charge to the positive charge. - ElectricDipoleMoment - ElectricDipoleMoment - http://qudt.org/vocab/quantitykind/ElectricDipoleMoment - https://www.wikidata.org/wiki/Q735135 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-35 - 6-6 - An electric dipole, vector quantity of magnitude equal to the product of the positive charge and the distance between the charges and directed from the negative charge to the positive charge. - https://doi.org/10.1351/goldbook.E01929 + energy difference between an electron at rest at infinity and an electron at the lowest level of the conduction band in an insulator or semiconductor + ElectronAffinity + ElectronAffinity + https://qudt.org/vocab/quantitykind/ElectronAffinity + https://www.wikidata.org/wiki/Q105846486 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-06-22 + 12-25 + energy difference between an electron at rest at infinity and an electron at the lowest level of the conduction band in an insulator or semiconductor - - + + + - Quantum number in an atom describing the magnitude of total angular momentum J. - TotalAngularMomentumQuantumNumber - TotalAngularMomentumQuantumNumber - https://qudt.org/vocab/quantitykind/TotalAngularMomentumQuantumNumber - https://www.wikidata.org/wiki/Q1141095 - 10-13.6 - Quantum number in an atom describing the magnitude of total angular momentum J. + Quotient of Larmor angular frequency and 2π. + LarmonFrequency + LarmonFrequency + 10-15.2 + Quotient of Larmor angular frequency and 2π. - - + + + + Treatment carried out after hardening or case hardening consisting of cooling to a temperature below room temperature to complete the transformation of austenite to martensite + DeepFreezing + Cryogenic treatment, Deep-freeze + Tieftemperaturbehandeln + DeepFreezing + Treatment carried out after hardening or case hardening consisting of cooling to a temperature below room temperature to complete the transformation of austenite to martensite + + + + - The overall time needed to acquire the measurement data - - MeasurementTime - MeasurementTime - The overall time needed to acquire the measurement data + A technique used to measure the specific surface area of porous materials by analyzing the adsorption of gas molecules onto the material's surface + BrunauerEmmettTellerMethod + BET + BrunauerEmmettTellerMethod + https://www.wikidata.org/wiki/Q795838 + A technique used to measure the specific surface area of porous materials by analyzing the adsorption of gas molecules onto the material's surface + https://en.wikipedia.org/wiki/BET_theory - - - - - Inverse of the quality factor. - LossFactor - LossFactor - https://qudt.org/vocab/quantitykind/LossFactor - https://www.wikidata.org/wiki/Q79468728 - 6-54 - Inverse of the quality factor. + + + + A physics-based model based on a physics equation describing the behaviour of electrons. + ElectronicModel + ElectronicModel + A physics-based model based on a physics equation describing the behaviour of electrons. + Density functional theory. +Hartree-Fock. - - - - - - ∇ - - - - Gradient - Gradient + + + + + MolarEnthalpy + MolarEnthalpy + Enthalpy per amount of substance. + https://www.wikidata.org/wiki/Q88769977 + 9-6.2 - - - - A construction language used to write configuration files. - ConfigurationLanguage - ConfigurationLanguage - A construction language used to write configuration files. - .ini files - Files in the standard .config directory on Unix systems. - https://en.wikipedia.org/wiki/Configuration_file#Configuration_languages + + + + Punctuation + Punctuation - + - T0 L-3 M0 I0 Θ0 N-1 J0 + T0 L0 M0 I0 Θ+1 N+1 J0 - ReciprocalAmountPerVolumeUnit - ReciprocalAmountPerVolumeUnit + AmountTemperatureUnit + AmountTemperatureUnit - + - T+3 L-2 M-1 I0 Θ+1 N0 J0 + T0 L+1 M0 I0 Θ-1 N0 J0 - ThermalResistanceUnit - ThermalResistanceUnit + LengthPerTemperatureUnit + LengthPerTemperatureUnit - - - - Data resulting of a pre-processing of raw data, applying corrections to normalize/harmonize, in order to prepare them for the post-processing. - - PrimaryData - PrimaryData - Data resulting of a pre-processing of raw data, applying corrections to normalize/harmonize, in order to prepare them for the post-processing. - Baseline subtraction - Noise reduction - X and Y axes correction + + + + + GreenStrangeQuark + GreenStrangeQuark - - - - - - - - - - + + + - Describes elements' or compounds' readiness to form bonds. - AffinityOfAChemicalReaction - ChemicalAffinity - AffinityOfAChemicalReaction - https://qudt.org/vocab/quantitykind/ChemicalAffinity - https://www.wikidata.org/wiki/Q382783 - 9-30 - Describes elements' or compounds' readiness to form bonds. - https://doi.org/10.1351/goldbook.A00178 + Quotient of radiation amplitude scattered by the atom and radiation amplitude scattered by a single electron. + AtomicScatteringFactor + AtomicScatteringFactor + https://qudt.org/vocab/quantitykind/AtomScatteringFactor + https://www.wikidata.org/wiki/Q837866 + 12-5.3 + Quotient of radiation amplitude scattered by the atom and radiation amplitude scattered by a single electron. + https://en.wikipedia.org/wiki/Atomic_form_factor - - - - A tessellation in wich a tile is next for two or more non spatially connected tiles. - Join - Join - A tessellation in wich a tile is next for two or more non spatially connected tiles. + + + + Irradiate + Irradiate - - - - - T0 L-2 M+1 I0 Θ0 N0 J0 - - - - - AreaDensityUnit - AreaDensityUnit + + + + SparkPlasmaSintering + SparkPlasmaSintering - + + + + + BlueUpAntiQuark + BlueUpAntiQuark + + + + + + heat treatment consisting of heating and soaking at a suitable temperature, followed by cooling under conditions such that, after return to ambient temperature, the metal will be in a structural state closer to that of equilibrium + Annealing + Annealing + heat treatment consisting of heating and soaking at a suitable temperature, followed by cooling under conditions such that, after return to ambient temperature, the metal will be in a structural state closer to that of equilibrium + + + + + + + An emulsion is a mixture of two or more liquids that are normally immiscible (a liquid-liquid heterogeneous mixture). + Emulsion + Emulsion + An emulsion is a mixture of two or more liquids that are normally immiscible (a liquid-liquid heterogeneous mixture). + Mayonnaise, milk. + + + + + + + Electric polarization divided by electric constant and electric field strength. + ElectricSusceptibility + ElectricSusceptibility + https://qudt.org/vocab/quantitykind/ElectricSusceptibility + https://www.wikidata.org/wiki/Q598305 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-12-19 + 6-16 + Electric polarization divided by electric constant and electric field strength. + https://en.wikipedia.org/wiki/Electric_susceptibility + + + - T+1 L+2 M0 I0 Θ0 N0 J0 + T+2 L+1 M-1 I0 Θ+1 N0 J0 - AreaTimeUnit - AreaTimeUnit + TemperaturePerPressureUnit + TemperaturePerPressureUnit + + + + + + + + A hypothesis is a theory, estimated and objective, since its estimated premises are objective. + Hypothesis + Hypothesis + A hypothesis is a theory, estimated and objective, since its estimated premises are objective. + + + + + + A suspension of fine particles in the atmosphere. + Dust + Dust + A suspension of fine particles in the atmosphere. + + + + + + + ElementaryBoson + ElementaryBoson + + + + + + A computational application that uses an empiric equation to predict the behaviour of a system without relying on the knowledge of the actual physical phenomena occurring in the object. + EmpiricalSimulationSoftware + EmpiricalSimulationSoftware + A computational application that uses an empiric equation to predict the behaviour of a system without relying on the knowledge of the actual physical phenomena occurring in the object. + + + + + + A estimator that uses modelling to declare a property of an object (i.e. infer a property from other properties). + Modeller + Modeller + A estimator that uses modelling to declare a property of an object (i.e. infer a property from other properties). + + + + + + ReactionSintering + ISO 3252:2019 Powder metallurgy +reaction sintering: process wherein at least two constituents of a powder mixture react during sintering + ReactionSintering - - - - - T-4 L+2 M0 I0 Θ0 N0 J0 - - - - - AreaPerQuarticTimeUnit - AreaPerQuarticTimeUnit + + + + A manufacturing in which the product is a solid body with a well defined geometrical shape made from shapeless original material parts, whose cohesion is created during the process. + ArchetypeManufacturing + DIN 8580:2020 + PrimitiveForming + Urformen + ArchetypeManufacturing + A manufacturing in which the product is a solid body with a well defined geometrical shape made from shapeless original material parts, whose cohesion is created during the process. - - - - Ellipsometry is an optical technique that uses polarised light to probe the dielectric -properties of a sample (optical system). The common application of ellipsometry is -the analysis of thin films. Through the analysis of the state of polarisation of the -light that is reflected from the sample, ellipsometry yields information on the layers that are thinner than the wavelength of the light itself, down to a single atomic -layer or less. Depending on what is already known about the sample, the technique -can probe a range of properties including layer thickness, morphology, and chemical composition. - - Ellipsometry - Ellipsometry - Ellipsometry is an optical technique that uses polarised light to probe the dielectric -properties of a sample (optical system). The common application of ellipsometry is -the analysis of thin films. Through the analysis of the state of polarisation of the -light that is reflected from the sample, ellipsometry yields information on the layers that are thinner than the wavelength of the light itself, down to a single atomic -layer or less. Depending on what is already known about the sample, the technique -can probe a range of properties including layer thickness, morphology, and chemical composition. + + + + MicrowaveSintering + MicrowaveSintering - - - - - RelativeMassFractionOfVapour - RelativeMassFractionOfVapour - 5-35 + + + + + GreenStrangeAntiQuark + GreenStrangeAntiQuark - - - - - Retarding force on a body moving in a fluid. - DragForce - DragForce - https://www.wikidata.org/wiki/Q206621 - 4-9.6 - Retarding force on a body moving in a fluid. + + + + a process in which the electric current is kept constant at 0 (i.e., open-circuit conditions) + + OpenCircuitHold + OCVHold + OpenCircuitHold + a process in which the electric current is kept constant at 0 (i.e., open-circuit conditions) - + - T-3 L+3 M+1 I-1 Θ0 N0 J0 + T-3 L+4 M+1 I0 Θ0 N0 J0 - - ElectricFluxUnit - ElectricFluxUnit + + PowerAreaUnit + PowerAreaUnit @@ -24527,232 +24342,126 @@ can probe a range of properties including layer thickness, morphology, and chemi Describes the effect that changing the volume of a crystal lattice has on its vibrational properties, and, as a consequence, the effect that changing temperature has on the size or dynamics of the lattice. - - - - Calendering - Calendering - - - - - - AmorphousMaterial - NonCrystallineMaterial - AmorphousMaterial - - - - - - Cementing - Cementing - - - + - T+1 L+1 M0 I+1 Θ0 N0 J0 + T+10 L-2 M-3 I+4 Θ0 N0 J0 - LengthTimeCurrentUnit - LengthTimeCurrentUnit - - - - - - A molecule composed of more than one element type. - Heteronuclear - Heteronuclear - A molecule composed of more than one element type. - Nitric oxide (NO) or carbon dioxide (CO₂). - - - - - - Rest mass of a nuclide X in the ground state. - NuclidicMass - NuclidicMass - https://www.wikidata.org/wiki/Q97010809 - 10-4.2 - Rest mass of a nuclide X in the ground state. - https://doi.org/10.1351/goldbook.N04258 + QuarticElectricDipoleMomentPerCubicEnergyUnit + QuarticElectricDipoleMomentPerCubicEnergyUnit - + - T-1 L-2 M0 I0 Θ0 N+1 J0 + T+4 L-1 M-1 I+2 Θ0 N0 J0 - AmountPerAreaTimeUnit - AmountPerAreaTimeUnit - - - - - - Exponent - Exponent - - - - - - - The integral over a time interval of the instantaneous power. - ActiveEnergy - ActiveEnergy - https://qudt.org/vocab/quantitykind/ActiveEnergy - https://www.wikidata.org/wiki/Q79813678 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-11-57 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=601-01-19 - 6-62 - The integral over a time interval of the instantaneous power. - - - - - - - In a nuclear reaction, sum of the kinetic energies and photon energies of the reaction products minus the sum of the kinetic and photon energies of the reactants. - ReactionEnergy - ReactionEnergy - https://qudt.org/vocab/quantitykind/ReactionEnergy - https://www.wikidata.org/wiki/Q98164745 - 10-37.1 - In a nuclear reaction, sum of the kinetic energies and photon energies of the reaction products minus the sum of the kinetic and photon energies of the reactants. - - - - - - - - - - - - - - - at a given point on a two-dimensional domain of quasi-infinitesimal area dA, scalar quantity equal to the mass dm within the domain divided by the area dA, thus ρA = dm/dA. - SurfaceMassDensity - AreicMass - SurfaceDensity - SurfaceMassDensity - https://www.wikidata.org/wiki/Q1907514 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-10 - 4-5 - at a given point on a two-dimensional domain of quasi-infinitesimal area dA, scalar quantity equal to the mass dm within the domain divided by the area dA, thus ρA = dm/dA. - https://doi.org/10.1351/goldbook.S06167 + CapacitancePerLengthUnit + CapacitancePerLengthUnit - - - - A chain of linked physics based model simulations solved iteratively, where equations are segregated. - IterativeCoupledModelsSimulation - IterativeCoupledModelsSimulation - A chain of linked physics based model simulations solved iteratively, where equations are segregated. + + + + + MuonAntiNeutrino + MuonAntiNeutrino - + + - - + - At a point in a fluid, the product of mass density and velocity. - MassFlow - MassFlow - https://www.wikidata.org/wiki/Q3265048 - 4-30.1 - At a point in a fluid, the product of mass density and velocity. - - - - - - - - - - - - - - - - - A variable that stand for a well known numerical constant (a known number). - KnownConstant - KnownConstant - A variable that stand for a well known numerical constant (a known number). - π refers to the constant number ~3.14 + Quotient of linear attenuation coefficient µ and the amount c of the medium. + MolarAttenuationCoefficient + MolarAttenuationCoefficient + https://www.wikidata.org/wiki/Q98592828 + 10-51 + Quotient of linear attenuation coefficient µ and the amount c of the medium. - - - + + + + + T-1 L0 M-1 I0 Θ0 N0 J0 + + + - One minus the square of the coupling factor - LeakageFactor - LeakageFactor - https://www.wikidata.org/wiki/Q78102042 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-42 - 6-42.2 - One minus the square of the coupling factor + PerTimeMassUnit + PerTimeMassUnit - - - - Ultrasonic testing (UT) is a family of non-destructive testing techniques based on the propagation of ultrasonic waves in the object or material tested. In most common UT applications, very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz, and occasionally up to 50 MHz, are transmitted into materials to detect internal flaws or to characterize materials. A common example is ultrasonic thickness measurement, which tests the thickness of the test object, for example, to monitor pipework corrosion. Ultrasonic testing is often performed on steel and other metals and alloys, though it can also be used on concrete, wood and composites, albeit with less resolution. It is used in many industries including steel and aluminium construction, metallurgy, manufacturing, aerospace, automotive and other transportation sectors. - UltrasonicTesting - UltrasonicTesting - Ultrasonic testing (UT) is a family of non-destructive testing techniques based on the propagation of ultrasonic waves in the object or material tested. In most common UT applications, very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz, and occasionally up to 50 MHz, are transmitted into materials to detect internal flaws or to characterize materials. A common example is ultrasonic thickness measurement, which tests the thickness of the test object, for example, to monitor pipework corrosion. Ultrasonic testing is often performed on steel and other metals and alloys, though it can also be used on concrete, wood and composites, albeit with less resolution. It is used in many industries including steel and aluminium construction, metallurgy, manufacturing, aerospace, automotive and other transportation sectors. + + + + Polynomial + Polynomial + 2 * x^2 + x + 3 - + - T+2 L+1 M-2 I0 Θ0 N+1 J0 + T-1 L+2 M+1 I0 Θ0 N0 J0 - - AmountPerMassPressureUnit - AmountPerMassPressureUnit + + AngularMomentumUnit + AngularMomentumUnit - - + + - Critical thermodynamic temperature of a ferromagnet. - CurieTemperature - CurieTemperature - https://qudt.org/vocab/quantitykind/CurieTemperature - https://www.wikidata.org/wiki/Q191073 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-12-51 - 12-35.1 - Critical thermodynamic temperature of a ferromagnet. + ThermodynamicGrueneisenParameter + ThermodynamicGrueneisenParameter + https://www.wikidata.org/wiki/Q105658620 + 12-13 + + + + + + A meson with spin zero and odd parity. + PseudoscalarMeson + PseudoscalarMeson + A meson with spin zero and odd parity. + https://en.wikipedia.org/wiki/Pseudoscalar_meson + + + + + + FormingFromGas + FormingFromGas + + + + + + Spacing + Spacing @@ -24762,45 +24471,130 @@ can probe a range of properties including layer thickness, morphology, and chemi GluonType1 - - - - Defines the Candela base unit in the SI system. - The luminous efficacy of monochromatic radiation of frequency 540 × 10 12 Hz, K cd , is a technical constant that gives an exact numerical relationship between the purely physical characteristics of the radiant power stimulating the human eye (W) and its photobiological response defined by the luminous flux due to the spectral responsivity of a standard observer (lm) at a frequency of 540 × 10 12 hertz. - LuminousEfficacyOf540THzRadiation - LuminousEfficacyOf540THzRadiation - The luminous efficacy of monochromatic radiation of frequency 540 × 10 12 Hz, K cd , is a technical constant that gives an exact numerical relationship between the purely physical characteristics of the radiant power stimulating the human eye (W) and its photobiological response defined by the luminous flux due to the spectral responsivity of a standard observer (lm) at a frequency of 540 × 10 12 hertz. + + + + In chemistry and thermodynamics, calorimetry (from Latin calor 'heat', and Greek μέτρον (metron) 'measure') is the science or act of measuring changes in state variables of a body for the purpose of deriving the heat transfer associated with changes of its state due, for example, to chemical reactions, physical changes, or phase transitions under specified constraints. Calorimetry is performed with a calorimeter. + Calorimetry + Calorimetry + In chemistry and thermodynamics, calorimetry (from Latin calor 'heat', and Greek μέτρον (metron) 'measure') is the science or act of measuring changes in state variables of a body for the purpose of deriving the heat transfer associated with changes of its state due, for example, to chemical reactions, physical changes, or phase transitions under specified constraints. Calorimetry is performed with a calorimeter. - - - - DippingForms - DippingForms + + + + A whole with temporal parts of its same type. + TemporallyRedundant + TemporallyRedundant + A whole with temporal parts of its same type. - - - - Secondary-ion mass spectrometry (SIMS) is a technique used to analyze the composition of solid surfaces and thin films by sputtering the surface of the specimen with a focused primary ion beam and collecting and analyzing ejected secondary ions. - - SecondaryIonMassSpectrometry - SIMS - SecondaryIonMassSpectrometry - Secondary-ion mass spectrometry (SIMS) is a technique used to analyze the composition of solid surfaces and thin films by sputtering the surface of the specimen with a focused primary ion beam and collecting and analyzing ejected secondary ions. + + + + + T+3 L-3 M-1 I+2 Θ0 N-1 J0 + + + + + ElectricConductivityPerAmountUnit + ElectricConductivityPerAmountUnit - + - T+2 L-3 M-1 I0 Θ0 N+1 J0 + T+1 L+2 M0 I+1 Θ0 N0 J0 - AmountSquareTimePerMassVolumeUnit - AmountSquareTimePerMassVolumeUnit + ElectricChargeAreaUnit + ElectricChargeAreaUnit + + + + + + + ElementaryFermion + ElementaryFermion + + + + + + A causal interaction is a fundamental causal system that is expressed as a complete bupartite directed graph K(m,n), when m=n. + CausalInteraction + CausalInteraction + A causal interaction is a fundamental causal system that is expressed as a complete bupartite directed graph K(m,n), when m=n. + + + + + + + Square root of the slowing down area. + SlowingDownLength + SlowingDownLength + https://qudt.org/vocab/quantitykind/Slowing-DownLength + https://www.wikidata.org/wiki/Q98996963 + 10-73.1 + Square root of the slowing down area. + + + + + + + + + + + + + + + Mass per unit area. + AreaDensity + AreaDensity + http://qudt.org/vocab/quantitykind/SurfaceDensity + https://doi.org/10.1351/goldbook.S06167 + + + + + + At a given point within a domain of quasi-infinitesimal volume V, vector quantity equal to the electric dipole moment p of the substance contained within the domain divided by the volume V. + ElectricPolarization + ElectricPolarization + https://qudt.org/vocab/quantitykind/ElectricPolarization + https://www.wikidata.org/wiki/Q1050425 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-37 + 6-7 + At a given point within a domain of quasi-infinitesimal volume V, vector quantity equal to the electric dipole moment p of the substance contained within the domain divided by the volume V. + + + + + + MultiParticlePath + MultiParticlePath + + + + + + + Quotient of the total number of fission or fission-dependent neutrons produced in the duration of a time interval and the total number of neutrons lost by absorption and leakage in that duration. + MultiplicationFactor + MultiplicationFactor + https://qudt.org/vocab/quantitykind/MultiplicationFactor + https://www.wikidata.org/wiki/Q99440471 + 10-78.1 + Quotient of the total number of fission or fission-dependent neutrons produced in the duration of a time interval and the total number of neutrons lost by absorption and leakage in that duration. @@ -24814,157 +24608,134 @@ can probe a range of properties including layer thickness, morphology, and chemi 6-52.4 - - - - - - - - - - - - - - - - - - - - Antimatter is matter that is composed only of the antiparticles of those that constitute ordinary matter. - This branch is not expanded due to the limited use of such entities. - AntiMatter - AntiMatter - Antimatter is matter that is composed only of the antiparticles of those that constitute ordinary matter. - This branch is not expanded due to the limited use of such entities. + + + + + ResourceIdentifier + ResourceIdentifier + + + + + + A material_relation can e.g. return a predefined number, return a database query, be an equation that depends on other physics_quantities. + An 'equation' that stands for a physical assumption specific to a material, and provides an expression for a 'physics_quantity' (the dependent variable) as function of other variables, physics_quantity or data (independent variables). + MaterialRelation + MaterialRelation + An 'equation' that stands for a physical assumption specific to a material, and provides an expression for a 'physics_quantity' (the dependent variable) as function of other variables, physics_quantity or data (independent variables). + The Lennard-Jones potential. +A force field. +An Hamiltonian. - - - + + + + A tessellation in wich a tile has next two or more non spatially connected tiles. + Fork + Fork + A tessellation in wich a tile has next two or more non spatially connected tiles. + + + + + + Measure of the opposition that a circuit presents to a current when a voltage is applied. + ElectricImpedance + Impedance + ElectricImpedance + http://qudt.org/vocab/quantitykind/Impedance + https://www.wikidata.org/wiki/Q179043 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-43 + 6-51.1 + https://en.wikipedia.org/wiki/Electrical_impedance + + + + + - RedCharmQuark - RedCharmQuark + RedBottomAntiQuark + RedBottomAntiQuark - + - T0 L0 M+1 I0 Θ+1 N0 J0 + T0 L+5 M0 I0 Θ0 N0 J0 - - MassTemperatureUnit - MassTemperatureUnit + + SectionAreaIntegralUnit + SectionAreaIntegralUnit - - - - + + + - ActivityFactor - ActivityFactor - https://www.wikidata.org/wiki/Q89335167 - 9-22 + The mass that it seems to have when responding to forces, or the mass that it seems to have when interacting with other identical particles in a thermal distribution. + EffectiveMass + EffectiveMass + https://qudt.org/vocab/quantitykind/EffectiveMass + https://www.wikidata.org/wiki/Q1064434 + 12-30 + The mass that it seems to have when responding to forces, or the mass that it seems to have when interacting with other identical particles in a thermal distribution. - - - - A computational application that uses a physical model to predict the behaviour of a system, providing a identifiable analogy with the original object. - PhysicalBasedSimulationSoftware - PhysicalBasedSimulationSoftware - A computational application that uses a physical model to predict the behaviour of a system, providing a identifiable analogy with the original object. + + + + RMS value voltage multiplied by rms value of electric current. + ApparentPower + ApparentPower + https://qudt.org/vocab/quantitykind/ApparentPower + https://www.wikidata.org/wiki/Q1930258 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-11-41 + 6-57 + RMS value voltage multiplied by rms value of electric current. - - - - - - - - - - - + + + - Difference between equilibrium and initial amount of a substance, divided by its stoichiometric number. - ExtentOfReaction - ExtentOfReaction - https://qudt.org/vocab/quantitykind/ExtentOfReaction - https://www.wikidata.org/wiki/Q899046 - 9-31 - Difference between equilibrium and initial amount of a substance, divided by its stoichiometric number. - https://doi.org/10.1351/goldbook.E02283 + Average distance that electrons travel between two successive interactions. + MeanFreePathOfElectrons + MeanFreePathOfElectrons + https://qudt.org/vocab/quantitykind/ElectronMeanFreePath + https://www.wikidata.org/wiki/Q105672307 + 12-15.2 + Average distance that electrons travel between two successive interactions. - + - T-2 L+3 M+1 I0 Θ0 N0 J0 + T+2 L0 M-1 I0 Θ0 N0 J0 - ForceAreaUnit - ForceAreaUnit - - - - - - A simulation in which more than one model are solved together with a coupled method. - TightlyCoupledModelsSimulation - TightlyCoupledModelsSimulation - A simulation in which more than one model are solved together with a coupled method. - Solving within the same linear system the discretised form of the pressure and momentum equation for a fluid, using the ideal gas law as material relation for connecting pressure to density. - - - - - - - IntermediateSample - IntermediateSample - - - - - - GravitySintering - ISO 3252:2019 Powder metallurgy -loose-powder sintering, gravity sintering: sintering of uncompacted powder - Loose-powderSintering - PressurelessSintering - GravitySintering - - - - - - Python - Python + SquareTimePerMassUnit + SquareTimePerMassUnit - - - + + + + + T-1 L0 M0 I0 Θ-1 N0 J0 + + + - Quotient of the mass of water vapour in moist gas by the total gas volume. - The mass concentration of water at saturation is denoted vsat. - MassConcentrationOfWaterVapour - MassConcentrationOfWaterVapour - https://qudt.org/vocab/quantitykind/MassConcentrationOfWaterVapour - https://www.wikidata.org/wiki/Q76378808 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-60 - Quotient of the mass of water vapour in moist gas by the total gas volume. + PerTemperatureTimeUnit + PerTemperatureTimeUnit @@ -24974,840 +24745,1013 @@ loose-powder sintering, gravity sintering: sintering of uncompacted powderFORTRAN - - - - - BlueCharmAntiQuark - BlueCharmAntiQuark + + + + IsothermalConversion + IsothermalConversion - + - T-1 L-3 M+1 I0 Θ0 N0 J0 + T-2 L0 M0 I0 Θ0 N0 J0 - MassPerVolumeTimeUnit - MassPerVolumeTimeUnit + AngularFrequencyUnit + AngularFrequencyUnit - - - + + + + + T-3 L-1 M+1 I0 Θ0 N0 J0 + + + - Helmholtz energy per amount of substance. - MolarHelmholtzEnergy - MolarHelmholtzEnergy - https://www.wikidata.org/wiki/Q88862986 - 9-6.3 - Helmholtz energy per amount of substance. + PressurePerTimeUnit + PressurePerTimeUnit + + + + + + According to UPAC Compendium of Chemical Terminology, a “signal” is “A representation of a quantity within an analytical instrument” (https://goldbook.iupac.org/terms/view/S05661 ). + Result (effect) of the interaction between the sample and the probe, which usually is a measurable and quantifiable quantity. + Signal is usually emitted from a characteristic “emission” volume, which can be different from the sample/probe “interaction” volume and can be usually quantified using proper physics equations and/or modelling of the interaction mechanisms. + + Signal + Signal + According to UPAC Compendium of Chemical Terminology, a “signal” is “A representation of a quantity within an analytical instrument” (https://goldbook.iupac.org/terms/view/S05661 ). + Result (effect) of the interaction between the sample and the probe, which usually is a measurable and quantifiable quantity. + Signal is usually emitted from a characteristic “emission” volume, which can be different from the sample/probe “interaction” volume and can be usually quantified using proper physics equations and/or modelling of the interaction mechanisms. + + + + + + MetallicMaterial + MetallicMaterial + + + + + + Ultrasonic testing (UT) is a family of non-destructive testing techniques based on the propagation of ultrasonic waves in the object or material tested. In most common UT applications, very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz, and occasionally up to 50 MHz, are transmitted into materials to detect internal flaws or to characterize materials. A common example is ultrasonic thickness measurement, which tests the thickness of the test object, for example, to monitor pipework corrosion. Ultrasonic testing is often performed on steel and other metals and alloys, though it can also be used on concrete, wood and composites, albeit with less resolution. It is used in many industries including steel and aluminium construction, metallurgy, manufacturing, aerospace, automotive and other transportation sectors. + UltrasonicTesting + UltrasonicTesting + Ultrasonic testing (UT) is a family of non-destructive testing techniques based on the propagation of ultrasonic waves in the object or material tested. In most common UT applications, very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz, and occasionally up to 50 MHz, are transmitted into materials to detect internal flaws or to characterize materials. A common example is ultrasonic thickness measurement, which tests the thickness of the test object, for example, to monitor pipework corrosion. Ultrasonic testing is often performed on steel and other metals and alloys, though it can also be used on concrete, wood and composites, albeit with less resolution. It is used in many industries including steel and aluminium construction, metallurgy, manufacturing, aerospace, automotive and other transportation sectors. + + + + + + + For an ideal gas, isentropic exponent is equal to ratio of the specific heat capacities. + IsentropicExponent + IsentropicExponent + https://qudt.org/vocab/quantitykind/IsentropicExponent + https://www.wikidata.org/wiki/Q75775739 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-52 + 5-17.2 - - + + - method of determining the internal resistance of an electrochemical cell by applying a low current followed by higher current within a short period, and then record the changes of battery voltage and current + Activity which has the goal of adjusting/tuning a measing instrument, without performing a measurement on a reference sample (which is a calibration). +The output of this process can be a specific measurement parameter to be used in the characteriasation measurement process. + Set of operations carried out on a measuring system so that it provides prescribed indications corresponding to given values of a quantity being measured +NOTE 1 If there is any doubt that the context in which the term is being used is that of metrology, the long form +“adjustment of a measuring system” might be used. +NOTE 2 Types of adjustment of a measuring system include zero adjustment, offset adjustment, and span adjustment +(sometimes called “gain adjustment”). +NOTE 3 Adjustment of a measuring system should not be confused with calibration, which is sometimes a prerequisite +for adjustment. +NOTE 4 After an adjustment of a measuring system, the measuring system must usually be recalibrated. + +-- International Vocabulary of Metrology(VIM) - DirectCurrentInternalResistance - DirectCurrentInternalResistance - method of determining the internal resistance of an electrochemical cell by applying a low current followed by higher current within a short period, and then record the changes of battery voltage and current - + MeasurementSystemAdjustment + MeasurementSystemAdjustment + Set of operations carried out on a measuring system so that it provides prescribed indications corresponding to given values of a quantity being measured +NOTE 1 If there is any doubt that the context in which the term is being used is that of metrology, the long form +“adjustment of a measuring system” might be used. +NOTE 2 Types of adjustment of a measuring system include zero adjustment, offset adjustment, and span adjustment +(sometimes called “gain adjustment”). +NOTE 3 Adjustment of a measuring system should not be confused with calibration, which is sometimes a prerequisite +for adjustment. +NOTE 4 After an adjustment of a measuring system, the measuring system must usually be recalibrated. - - - - Atomic force microscopy (AFM) is an influential surface analysis technique used for micro/nanostructured coatings. This flexible technique can be used to obtain high-resolution nanoscale images and study local sites in air (conventional AFM) or liquid (electrochemical AFM) surroundings. - AtomicForceMicroscopy - AtomicForceMicroscopy - Atomic force microscopy (AFM) is an influential surface analysis technique used for micro/nanostructured coatings. This flexible technique can be used to obtain high-resolution nanoscale images and study local sites in air (conventional AFM) or liquid (electrochemical AFM) surroundings. +-- International Vocabulary of Metrology(VIM) + Activity which has the goal of adjusting/tuning a measing instrument, without performing a measurement on a reference sample (which is a calibration). +The output of this process can be a specific measurement parameter to be used in the characteriasation measurement process. + Adjustment - - + + - Electroplating - Electroplating + ContinuousCasting + ContinuousCasting - - - - Magnetic flux the integration area of which is such that magnetic field lines cross it in the same orientation more than once. - LinkedFlux - LinkedFlux - https://qudt.org/vocab/quantitykind/MagneticFlux - https://www.wikidata.org/wiki/Q4374882 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-77 - 6-22.2 - Magnetic flux the integration area of which is such that magnetic field lines cross it in the same orientation more than once. + + + + A tessellation in wich a tile is next for two or more non spatially connected tiles. + Join + Join + A tessellation in wich a tile is next for two or more non spatially connected tiles. - - - - (according to DIN 8200) Shot peening to generate residual compressive stresses in layers of the blasting material close to the surface in order to improve certain component properties, e.g. fatigue strength, corrosion resistance, wear resistance (from: DIN 8200:1982) - Peening - ShotPeening - Verfestigungsstrahlen - Peening - (according to DIN 8200) Shot peening to generate residual compressive stresses in layers of the blasting material close to the surface in order to improve certain component properties, e.g. fatigue strength, corrosion resistance, wear resistance (from: DIN 8200:1982) + + + + A computer language that expresses the presentation of structured documents. + StyleSheetLanguage + StyleSheetLanguage + A computer language that expresses the presentation of structured documents. + CSS + https://en.wikipedia.org/wiki/Style_sheet_language - - + + - Coulometric titrations are usually carried out in convective mass transfer mode using a large surface working electrode. The reference and auxiliary electrodes are located in sepa- rate compartments. A basic requirement is a 100 % current efficiency of titrant generation at the working electrode. End-point detection can be accomplished with potentiometry, amperometry, biamperometry, bipotentiometry, photometry, or by using a visual indicator. - The main advantages are that titration is possible with less stable titrants, the standardi- zation of titrant is not necessary, the volume of the test solution is not changed, and the method is easily automated. - titration in which the titrant is generated electrochemically, either by constant current or at constant potential. The titrant reacts stoichiometrically with the analyte, the amount of which is calculated using Faraday’s laws of electrolysis from the electric charge required to reach the end-point - - CoulometricTitration - CoulometricTitration - titration in which the titrant is generated electrochemically, either by constant current or at constant potential. The titrant reacts stoichiometrically with the analyte, the amount of which is calculated using Faraday’s laws of electrolysis from the electric charge required to reach the end-point + Describes what is needed to repeat the experiment + AccessConditions + AccessConditions + Describes what is needed to repeat the experiment + In case of national or international facilities such as synchrotrons describe the programme that enabled you to access these. Was the access to your characterisation tool an inhouse routine or required a 3rd party service? Was the access to your sample preparation an inhouse routine or required a 3rd party service? - - - - - In nuclear physics, quotient of the reduced Planck constant and the mean duration of life of an unstable particle or an excited state. - LevelWidth - LevelWidth - https://qudt.org/vocab/quantitykind/LevelWidth - https://www.wikidata.org/wiki/Q98082340 - 10-26 - In nuclear physics, quotient of the reduced Planck constant and the mean duration of life of an unstable particle or an excited state. - https://doi.org/10.1351/goldbook.L03507 + + + + SystemUnit + SystemUnit - + - T0 L+3 M-1 I0 Θ0 N0 J0 + T+2 L-3 M-1 I0 Θ0 N+1 J0 - VolumePerMassUnit - VolumePerMassUnit + AmountSquareTimePerMassVolumeUnit + AmountSquareTimePerMassVolumeUnit - + + + + PlasmaCutting + PlasmaCutting + + + - + - + - Quotient of linear attenuation coefficient µ and the amount c of the medium. - MolarAttenuationCoefficient - MolarAttenuationCoefficient - https://www.wikidata.org/wiki/Q98592828 - 10-51 - Quotient of linear attenuation coefficient µ and the amount c of the medium. - - - - - - - T+7 L-3 M-2 I+3 Θ0 N0 J0 - - - - - CubicElectricChargeLengthPerSquareEnergyUnit - CubicElectricChargeLengthPerSquareEnergyUnit - - - - - - - An emulsion is a mixture of two or more liquids that are normally immiscible (a liquid-liquid heterogeneous mixture). - Emulsion - Emulsion - An emulsion is a mixture of two or more liquids that are normally immiscible (a liquid-liquid heterogeneous mixture). - Mayonnaise, milk. - - - - - - DropForging - DropForging + Arithmetic average of (electric field strength multiplied by electric flux density) and (magnetic field strength multiplied by magnetic flux density) + ElectromagneticEnergyDensity + VolumicElectromagneticEnergy + ElectromagneticEnergyDensity + https://qudt.org/vocab/quantitykind/ElectromagneticEnergyDensity + https://www.wikidata.org/wiki/Q77989624 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-65 + 6-33 + Arithmetic average of (electric field strength multiplied by electric flux density) and (magnetic field strength multiplied by magnetic flux density) - - - - - T0 L-3 M+1 I0 Θ0 N0 J0 - - - + + + - DensityUnit - DensityUnit + Mean energy, excluding rest energy, of the particles that are emitted, transferred, or received. + RadiantEnergy + RadiantEnergy + https://www.wikidata.org/wiki/Q1259526 + 10-45 + Mean energy, excluding rest energy, of the particles that are emitted, transferred, or received. - - - - Scanning Kelvin probe (SKP) and scanning Kelvin probe force microscopy (SKPFM) are probe techniques which permit mapping of topography and Volta potential distribution on electrode surfaces. It measures the surface electrical potential of a sample without requiring an actual physical contact. - - ScanningKelvinProbe - SKB - ScanningKelvinProbe - Scanning Kelvin probe (SKP) and scanning Kelvin probe force microscopy (SKPFM) are probe techniques which permit mapping of topography and Volta potential distribution on electrode surfaces. It measures the surface electrical potential of a sample without requiring an actual physical contact. + + + + C + C - - + + - Quotient of mass defect and the unified atomic mass constant. - RelativeMassDefect - RelativeMassDefect - https://qudt.org/vocab/quantitykind/RelativeMassDefect - https://www.wikidata.org/wiki/Q98038718 - 10-22.2 - Quotient of mass defect and the unified atomic mass constant. - - - - - - HardeningByForging - HardeningByForging - - - - - - Nanoindentation (known also as nanoindentation test) is a method for testing the hardness and related mechanical properties of materials, facilitated by high-precision instrumentation in the nanometer scale, as well as analytical and computational algorithms for result evaluation. - - Nanoindentation - Nanoindentation - Nanoindentation (known also as nanoindentation test) is a method for testing the hardness and related mechanical properties of materials, facilitated by high-precision instrumentation in the nanometer scale, as well as analytical and computational algorithms for result evaluation. - By definition, when someone performs nanoindentation, it refers to either quasistatic or continuous stiffness measurement. However, in reality with a nanoindenter it is also possible to perform scratch testing, scanning probe microscopy, and apply non-contact surface energy mapping, which can also be called nanoindentation, because they are measurements conducted using an nanoindenter. + For a solvent in a solution, quotient of the absolute activity and that of the pure substance at the same temperature and pressure. + ActivityOfSolvent + ActivityOfSolvent + https://www.wikidata.org/wiki/Q89486193 + 9-27.1 + For a solvent in a solution, quotient of the absolute activity and that of the pure substance at the same temperature and pressure. - + - T0 L0 M0 I+1 Θ-1 N0 J0 + T+2 L+1 M-1 I0 Θ0 N0 J0 - ElectricCurrentPerTemperatureUnit - ElectricCurrentPerTemperatureUnit + PerPressureUnit + PerPressureUnit - - - - A estimator that uses modelling to declare a property of an object (i.e. infer a property from other properties). - Modeller - Modeller - A estimator that uses modelling to declare a property of an object (i.e. infer a property from other properties). + + + + + T+2 L-1 M-1 I+1 Θ0 N0 J0 + + + + + MagneticReluctivityUnit + MagneticReluctivityUnit - - - - Determined - Determined + + + + VaporDeposition + VaporDeposition - - + + - Charge number that an atom within a molecule would have if all the ligands were removed along with the electron pairs that were shared. - OxidationNumber - OxidationState - OxidationNumber - https://www.wikidata.org/wiki/Q484152 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-01-25 - https://dbpedia.org/page/Oxidation_state - Charge number that an atom within a molecule would have if all the ligands were removed along with the electron pairs that were shared. - https://en.wikipedia.org/wiki/Oxidation_state - https://doi.org/10.1351/goldbook.O04363 + Quantum number in an atom describing the magnitude of total angular momentum J. + TotalAngularMomentumQuantumNumber + TotalAngularMomentumQuantumNumber + https://qudt.org/vocab/quantitykind/TotalAngularMomentumQuantumNumber + https://www.wikidata.org/wiki/Q1141095 + 10-13.6 + Quantum number in an atom describing the magnitude of total angular momentum J. - + - T+2 L-2 M-1 I+1 Θ0 N0 J0 + T-2 L+1 M+1 I0 Θ0 N0 J0 - ElectricCurrentPerEnergyUnit - ElectricCurrentPerEnergyUnit + ForceUnit + ForceUnit - + + + + Exponent + Exponent + + + - T0 L+1 M0 I0 Θ+1 N0 J0 + T+1 L0 M0 I+1 Θ0 N-1 J0 - LengthTemperatureUnit - LengthTemperatureUnit + ElectricChargePerAmountUnit + ElectricChargePerAmountUnit - + + + + MesoscopicSubstance + MesoscopicSubstance + + + + + + Gathering + Gathering + + + + + + + Quotient of electron and hole mobility. + MobilityRatio + MobilityRatio + https://qudt.org/vocab/quantitykind/MobilityRatio + https://www.wikidata.org/wiki/Q106010255 + 12-31 + Quotient of electron and hole mobility. + + + - T+1 L0 M0 I+1 Θ0 N0 J0 + T+3 L-1 M-1 I0 Θ+1 N0 J0 - ElectricChargeUnit - ElectricChargeUnit + ThermalResistivityUnit + ThermalResistivityUnit - - - - - Degenerency - Multiplicity - Degenerency - https://www.wikidata.org/wiki/Q902301 - 9-36.2 - https://doi.org/10.1351/goldbook.D01556 + + + + A construction language designed to transform some input text in a certain formal language into a modified output text that meets some specific goal. + TransformationLanguage + TransformationLanguage + A construction language designed to transform some input text in a certain formal language into a modified output text that meets some specific goal. + https://en.wikipedia.org/wiki/Transformation_language + Tritium, XSLT, XQuery, STX, FXT, XDuce, CDuce, HaXml, XMLambda, FleXML - - - - A liquid solution in which the solvent is water. - AqueousSolution - AqueousSolution - A liquid solution in which the solvent is water. + + + + + A workflow that is the concurrent evolution of two or more tasks, not communicacting between themselves. + PureParallelWorkflow + EmbarassinglyParallelWorkflow + PureParallelWorkflow + A workflow that is the concurrent evolution of two or more tasks, not communicacting between themselves. - - - - - A coarse dispersion of solid in a solid continuum phase. - SolidSolidSuspension - SolidSolidSuspension - A coarse dispersion of solid in a solid continuum phase. - Granite, sand, dried concrete. + + + + Analytical electron microscopy (AEM) refers to the collection of spectroscopic data in TEM or STEM, enabling qualitative or quantitative compositional analysis. + AnalyticalElectronMicroscopy + AnalyticalElectronMicroscopy + Analytical electron microscopy (AEM) refers to the collection of spectroscopic data in TEM or STEM, enabling qualitative or quantitative compositional analysis. - + - T0 L+1 M+1 I0 Θ0 N0 J0 + T0 L0 M-2 I0 Θ0 N0 J0 - - LengthMassUnit - LengthMassUnit - - - - - Unit for quantities of dimension one that are the fraction of two volumes. - VolumeFractionUnit - VolumeFractionUnit - Unit for quantities of dimension one that are the fraction of two volumes. - Unit for volume fraction. + InverseSquareMassUnit + InverseSquareMassUnit - + - T+1 L-1 M0 I0 Θ0 N0 J0 + T+2 L-2 M-1 I+1 Θ0 N0 J0 - TimePerLengthUnit - TimePerLengthUnit + ElectricCurrentPerEnergyUnit + ElectricCurrentPerEnergyUnit - + - T+2 L+1 M-1 I0 Θ+1 N0 J0 + T-2 L-2 M0 I0 Θ0 N0 J0 - TemperaturePerPressureUnit - TemperaturePerPressureUnit - - - - - - MicrowaveSintering - MicrowaveSintering + FrequencyPerAreaTimeUnit + FrequencyPerAreaTimeUnit - - - - PolymericMaterial - PolymericMaterial + + + + + + + + + + + + + Quantity equal to the volume dV of substance crossing a given surface during a time interval with infinitesimal duration dt, divided by this duration, thus qV = dV / dt- + VolumeFlowRate + VolumetricFlowRate + VolumeFlowRate + https://qudt.org/vocab/quantitykind/VolumeFlowRate + https://www.wikidata.org/wiki/Q1134348 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-72 + 4-31 + Quantity equal to the volume dV of substance crossing a given surface during a time interval with infinitesimal duration dt, divided by this duration, thus qV = dV / dt- + https://en.wikipedia.org/wiki/Volumetric_flow_rate - - - - - A coarse dispersion of gas in a solid continuum phase. - SolidGasSuspension - SolidGasSuspension - A coarse dispersion of gas in a solid continuum phase. + + + + + + + ThermodynamicCriticalMagneticFluxDensity + ThermodynamicCriticalMagneticFluxDensity + https://qudt.org/vocab/quantitykind/ThermodynamicCriticalMagneticFluxDensity + https://www.wikidata.org/wiki/Q106103200 + 12-36.1 - - - + + + + + T0 L+3 M0 I0 Θ-1 N0 J0 + + + - Under periodic conditions, ratio of the absolute value of the active power P to the apparent power S. - PowerFactor - PowerFactor - https://qudt.org/vocab/quantitykind/PowerFactor - https://www.wikidata.org/wiki/Q750454 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-11-46 - 6-58 - Under periodic conditions, ratio of the absolute value of the active power P to the apparent power S. + VolumePerTemperatureUnit + VolumePerTemperatureUnit - - - - Magnetizing - Magnetizing + + + + + Angular frequency of the electron angular momentum vector precession about the axis of an external magnetic field. + LarmonAngularFrequency + LarmonAngularFrequency + 10-15.1 + Angular frequency of the electron angular momentum vector precession about the axis of an external magnetic field. - - + + + + + T-6 L+4 M+2 I-2 Θ-2 N0 J0 + + + - duration of one cycle of a periodic event - PeriodDuration - Period - PeriodDuration - https://qudt.org/vocab/quantitykind/Period - https://www.wikidata.org/wiki/Q2642727 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-06-01 - 3-14 - duration of one cycle of a periodic event - https://doi.org/10.1351/goldbook.P04493 + SquareElectricPotentialPerSquareTemperatureUnit + SquareElectricPotentialPerSquareTemperatureUnit - - - - X-ray photoelectron spectroscopy (XPS), also known as ESCA (electron spectroscopy for chemical analysis) is a surface analysis technique which provides both elemental and chemical state information virtually without restriction on the type of material which can be analysed. It is a relatively simple technique where the sample is illuminated with X-rays which have enough energy to eject an electron from the atom. These ejected electrons are known as photoelectrons. The kinetic energy of these emitted electrons is characteristic of the element from which the photoelectron originated. The position and intensity of the peaks in an energy spectrum provide the desired chemical state and quantitative information. The surface sensitivity of XPS is determined by the distance that that photoelectron can travel through the material without losing any kinteic energy. These elastiaclly scattered photoelectrons contribute to the photoelectron peak, whilst photoelectrons that have been inelastically scattered, losing some kinetic energy before leaving the material, will contribute to the spectral background. - XpsVariableKinetic - Electron spectroscopy for chemical analysis (ESCA) - X-ray photoelectron spectroscopy (XPS) - XpsVariableKinetic - X-ray photoelectron spectroscopy (XPS), also known as ESCA (electron spectroscopy for chemical analysis) is a surface analysis technique which provides both elemental and chemical state information virtually without restriction on the type of material which can be analysed. It is a relatively simple technique where the sample is illuminated with X-rays which have enough energy to eject an electron from the atom. These ejected electrons are known as photoelectrons. The kinetic energy of these emitted electrons is characteristic of the element from which the photoelectron originated. The position and intensity of the peaks in an energy spectrum provide the desired chemical state and quantitative information. The surface sensitivity of XPS is determined by the distance that that photoelectron can travel through the material without losing any kinteic energy. These elastiaclly scattered photoelectrons contribute to the photoelectron peak, whilst photoelectrons that have been inelastically scattered, losing some kinetic energy before leaving the material, will contribute to the spectral background. + + + + A device that is designed to participate to a manufacturing process. + ManufacturingDevice + ManufacturingDevice + A device that is designed to participate to a manufacturing process. - - - - - A unit symbol that stands for a derived unit. - Special units are semiotic shortcuts to more complex composed symbolic objects. - SpecialUnit - SpecialUnit - A unit symbol that stands for a derived unit. - Pa stands for N/m2 -J stands for N m + + + + Painting + Painting - - + + - Synchrotron - Synchrotron + HardwareModel + HardwareModel - - - - CentrifugalCasting - CentrifugalCasting + + + + + + + + + + + + + + Used to break-down a CalibrationProcess into his specific tasks. + CalibrationTask + CalibrationTask + Used to break-down a CalibrationProcess into his specific tasks. - + - T-2 L-2 M0 I0 Θ0 N0 J0 + T-3 L-2 M+2 I0 Θ0 N0 J0 - FrequencyPerAreaTimeUnit - FrequencyPerAreaTimeUnit - - - - - - Presses - Presses + SquarePressureTimeUnit + SquarePressureTimeUnit - - - - FormingFromPowder - FormingFromPowder + + + + + + HardwareManufacturer + HardwareManufacturer - - - - - + + + - - + + + + 3-dimensional array who's spatial direct parts are matrices. + Array3D + 3DArray + Array3D + 3-dimensional array who's spatial direct parts are matrices. + + + + - Quotient of the linear attenuation coefficient µ and the number density, n, of atoms in the substance. - AtomicAttenuationCoefficient - AtomicAttenuationCoefficient - https://www.wikidata.org/wiki/Q98592911 - 10-52 - Quotient of the linear attenuation coefficient µ and the number density, n, of atoms in the substance. + ElectricCurrentPhasor + ElectricCurrentPhasor + https://qudt.org/vocab/quantitykind/ElectricCurrentPhasor + https://www.wikidata.org/wiki/Q78514596 + 6-49 - - - + + + + + T+1 L+2 M0 I0 Θ0 N0 J0 + + + - Permittivity divided by electric constant. - RelativePermittivity - RelativePermittivity - https://qudt.org/vocab/unit/PERMITTIVITY_REL - https://www.wikidata.org/wiki/Q4027242 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-12-13 - 6-15 - Permittivity divided by electric constant. + AreaTimeUnit + AreaTimeUnit - - - + + + + + T0 L+3 M0 I0 Θ0 N-1 J0 + + + - Factor taking into account health effects in the determination of the dose equivalent. - QualityFactor - QualityFactor - https://qudt.org/vocab/quantitykind/DoseEquivalentQualityFactor - https://www.wikidata.org/wiki/Q2122099 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-14-03 - 10-82 - Factor taking into account health effects in the determination of the dose equivalent. + VolumePerAmountUnit + VolumePerAmountUnit - - - - PermanentLiquidPhaseSintering - PermanentLiquidPhaseSintering + + + + + T0 L0 M+1 I0 Θ0 N+1 J0 + + + + + MassAmountOfSubstanceUnit + MassAmountOfSubstanceUnit - - - - - Electron backscatter diffraction (EBSD) is a scanning electron microscopy (SEM) technique used to study the crystallographic structure of materials. EBSD is carried out in a scanning electron microscope equipped with an EBSD detector comprising at least a phosphorescent screen, a compact lens and a low-light camera. In this configuration, the SEM incident beam hits the tilted sample. As backscattered electrons leave the sample, they interact with the crystal's periodic atomic lattice planes and diffract according to Bragg's law at various scattering angles before reaching the phosphor screen forming Kikuchi patterns (EBSPs). EBSD spatial resolution depends on many factors, including the nature of the material under study and the sample preparation. Thus, EBSPs can be indexed to provide information about the material's grain structure, grain orientation, and phase at the micro-scale. EBSD is applied for impurities and defect studies, plastic deformation, and statistical analysis for average misorientation, grain size, and crystallographic texture. EBSD can also be combined with energy-dispersive X-ray spectroscopy (EDS), cathodoluminescence (CL), and wavelength-dispersive X-ray spectroscopy (WDS) for advanced phase identification and materials discovery. - - ElectronBackscatterDiffraction - EBSD - ElectronBackscatterDiffraction - Electron backscatter diffraction (EBSD) is a scanning electron microscopy (SEM) technique used to study the crystallographic structure of materials. EBSD is carried out in a scanning electron microscope equipped with an EBSD detector comprising at least a phosphorescent screen, a compact lens and a low-light camera. In this configuration, the SEM incident beam hits the tilted sample. As backscattered electrons leave the sample, they interact with the crystal's periodic atomic lattice planes and diffract according to Bragg's law at various scattering angles before reaching the phosphor screen forming Kikuchi patterns (EBSPs). EBSD spatial resolution depends on many factors, including the nature of the material under study and the sample preparation. Thus, EBSPs can be indexed to provide information about the material's grain structure, grain orientation, and phase at the micro-scale. EBSD is applied for impurities and defect studies, plastic deformation, and statistical analysis for average misorientation, grain size, and crystallographic texture. EBSD can also be combined with energy-dispersive X-ray spectroscopy (EDS), cathodoluminescence (CL), and wavelength-dispersive X-ray spectroscopy (WDS) for advanced phase identification and materials discovery. + + + + JavaScript + JavaScript + + + + + + + Quantity of dimension 1 equal to u/(1 + u), where u is mass ratio of water to dry matter. + MassFractionOfWater + MassFractionOfWater + https://qudt.org/vocab/quantitykind/MassFractionOfWater + https://www.wikidata.org/wiki/Q76379025 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-63 + 5-31 + Quantity of dimension 1 equal to u/(1 + u), where u is mass ratio of water to dry matter. - + - T0 L+2 M+1 I0 Θ0 N0 J0 + T+3 L0 M-1 I0 Θ+1 N0 J0 - MassAreaUnit - MassAreaUnit + PerThermalTransmittanceUnit + PerThermalTransmittanceUnit - - - + + + + + T-1 L-1 M0 I0 Θ0 N0 J0 + + + - The amount of a constituent divided by the total amount of all constituents in a mixture. - AmountFraction - MoleFraction - AmountFraction - http://qudt.org/vocab/quantitykind/MoleFraction - The amount of a constituent divided by the total amount of all constituents in a mixture. - https://doi.org/10.1351/goldbook.A00296 + PerLengthTimeUnit + PerLengthTimeUnit - - - - Fractography is the study of fracture surfaces in order to determine the relation between the microstructure and the mechanism(s) of crack initiation and propagation and, eventually, the root cause of the fracture .Fractography qualitatively interprets the mechanisms of fracture that occur in a sample by microscopic examination of fracture surface morpholog. - - Fractography - Fractography - Fractography is the study of fracture surfaces in order to determine the relation between the microstructure and the mechanism(s) of crack initiation and propagation and, eventually, the root cause of the fracture .Fractography qualitatively interprets the mechanisms of fracture that occur in a sample by microscopic examination of fracture surface morpholog. + + + + PorcelainOrCeramicCasting + PorcelainOrCeramicCasting - - - - ThermalSprayingForming - ThermalSprayingForming + + + + Internal energy per unit mass. + SpecificInternalEnergy + SpecificInternalEnergy + https://qudt.org/vocab/quantitykind/SpecificInternalEnergy + https://www.wikidata.org/wiki/Q76357367 + 5-21.2 + Internal energy per unit mass. - - - - MesoscopicSubstance - MesoscopicSubstance + + + + Process for joining two (base) materials by means of an adhesive polymer material + Gluing + Kleben + Gluing - - - - A material that takes active part in a chemical reaction. - ReactiveMaterial - ReactiveMaterial - A material that takes active part in a chemical reaction. + + + + + A quantity whos value that cannot be univocally determined and depends on an agent (e.g. a human individual, a community). + SubjectiveProperty + SubjectiveProperty + A quantity whos value that cannot be univocally determined and depends on an agent (e.g. a human individual, a community). + The measure of beauty on a scale from 1 to 10. - - - - Dynamic mechanical analysis (abbreviated DMA) is a characterisation technique where a sinusoidal stress is applied and the strain in the material is measured, allowing one to determine the complex modulus. The temperature of the sample or the frequency of the stress are often varied, leading to variations in the complex modulus; this approach can be used to locate the glass transition temperature[1] of the material, as well as to identify transitions corresponding to other molecular motions. - - DynamicMechanicalAnalysis - DynamicMechanicalAnalysis - Dynamic mechanical analysis (abbreviated DMA) is a characterisation technique where a sinusoidal stress is applied and the strain in the material is measured, allowing one to determine the complex modulus. The temperature of the sample or the frequency of the stress are often varied, leading to variations in the complex modulus; this approach can be used to locate the glass transition temperature[1] of the material, as well as to identify transitions corresponding to other molecular motions. + + + + A construction language used to make queries in databases and information systems. + QueryLanguage + QueryLanguage + A construction language used to make queries in databases and information systems. + SQL, SPARQL + https://en.wikipedia.org/wiki/Query_language - - + + - GravityCasting - GravityCasting + HardeningByDrawing + HardeningByDrawing - - + + - PlasmaCutting - PlasmaCutting + DropForging + DropForging - - - - FlameCutting - FlameCutting + + + + + T-1 L0 M0 I0 Θ+2 N0 J0 + + + + + SquareTemperaturePerTimeUnit + SquareTemperaturePerTimeUnit - + - T+1 L0 M0 I+1 Θ-1 N0 J0 + T0 L-3 M0 I+1 Θ0 N-1 J0 - ElectricChargePerTemperatureUnit - ElectricChargePerTemperatureUnit + ElectricCurrentPerAmountVolumeUnit + ElectricCurrentPerAmountVolumeUnit - - + + + + + T-1 L0 M0 I0 Θ+1 N0 J0 + + + - Atomic quantum number related to the orbital angular momentum l of a one-electron state. - OrbitalAngularMomentumQuantumNumber - OrbitalAngularMomentumQuantumNumber - https://qudt.org/vocab/quantitykind/OrbitalAngularMomentumQuantumNumber - https://www.wikidata.org/wiki/Q1916324 - 10-13.3 - Atomic quantum number related to the orbital angular momentum l of a one-electron state. + TemperaturePerTimeUnit + TemperaturePerTimeUnit - + + + + FunctionallyDefinedMaterial + FunctionallyDefinedMaterial + + + - T0 L0 M0 I0 Θ+1 N+1 J0 + T-3 L0 M+1 I-1 Θ0 N0 J0 - AmountTemperatureUnit - AmountTemperatureUnit + ElectricPotentialPerAreaUnit + ElectricPotentialPerAreaUnit - - + + + + + + + + + + An 'equation' that has parts two 'polynomial'-s + AlgebricEquation + AlgebricEquation + 2 * a - b = c + + + + - SandMolds - SandMolds + Cementing + Cementing + + + + + + PermanentLiquidPhaseSintering + PermanentLiquidPhaseSintering + + + + + + MetallicPowderSintering + MetallicPowderSintering + + + + + + A law that provides a connection between a material property and other properties of the object. + MaterialLaw + MaterialLaw + A law that provides a connection between a material property and other properties of the object. + + + + + + ConcreteOrPlasterPouring + ConcreteOrPlasterPouring + + + + + + HardeningByForging + HardeningByForging + + + + + + GluonType6 + GluonType6 + + + + + + + SampleInspectionInstrument + SampleInspectionInstrument - + - T+10 L-2 M-3 I+4 Θ0 N0 J0 + T-2 L+3 M+1 I-1 Θ0 N0 J0 - QuarticElectricDipoleMomentPerCubicEnergyUnit - QuarticElectricDipoleMomentPerCubicEnergyUnit + MagneticDipoleMomentUnit + MagneticDipoleMomentUnit - + + + + UTF8 + UTF8 + + + + + + Assigned + Assigned + + + - T+3 L-1 M-1 I0 Θ+1 N0 J0 + T+1 L-1 M0 I0 Θ0 N0 J0 - ThermalResistivityUnit - ThermalResistivityUnit + TimePerLengthUnit + TimePerLengthUnit - - - - WPositiveBoson - WPositiveBoson + + + + PaperManufacturing + PaperManufacturing - - - - - GreenTopQuark - GreenTopQuark + + + + DippingForms + DippingForms - - + + + - HardeningByDrawing - HardeningByDrawing + InjectionMolding + InjectionMolding - - - - C - C + + + + ElectrolyticDeposition + ElectrolyticDeposition - - - - Hydrodynamic voltammetry using a a rotating disc electrode, where the limiting current is described by the Levich equation - VoltammetryAtARotatingDiskElectrode - VoltammetryAtARotatingDiskElectrode - Hydrodynamic voltammetry using a a rotating disc electrode, where the limiting current is described by the Levich equation - https://doi.org/10.1515/pac-2018-0109 + + + + Foaming + Foaming - - - - Process consisting of two steps: - first, the steel is heated in a quenching treatment to a temperature above Ac3 and then rapidly cooled in a liquid to produce a process-specific grain structure; - subsequently, the steel is heated to a specific temperature during tempering to set the desired property and cooled in air. - Tempering - QuenchingAndTempering - Vergüten - Tempering - Process consisting of two steps: - first, the steel is heated in a quenching treatment to a temperature above Ac3 and then rapidly cooled in a liquid to produce a process-specific grain structure; - subsequently, the steel is heated to a specific temperature during tempering to set the desired property and cooled in air. + + + + + T0 L+1 M0 I0 Θ+1 N0 J0 + + + + + LengthTemperatureUnit + LengthTemperatureUnit - - - - Vapor pressure osmometry measures vapor pressure indirectly by measuring the change in temperature of a polymer solution on dilution by solvent vapor and is generally useful for polymers with Mn below 10,000–40,000 g/mol. When molecular weight is more than that limit, the quantity being measured becomes very small to detect. - - VaporPressureDepressionOsmometry - VPO - VaporPressureDepressionOsmometry - Vapor pressure osmometry measures vapor pressure indirectly by measuring the change in temperature of a polymer solution on dilution by solvent vapor and is generally useful for polymers with Mn below 10,000–40,000 g/mol. When molecular weight is more than that limit, the quantity being measured becomes very small to detect. + + + + + T+1 L0 M-1 I0 Θ0 N0 J0 + + + + + MechanicalMobilityUnit + MechanicalMobilityUnit - - + + - PaperManufacturing - PaperManufacturing + CentrifugalCasting + CentrifugalCasting - + - T-2 L0 M+2 I0 Θ0 N0 J0 + T-2 L+3 M+1 I-1 Θ+1 N0 J0 - - SquareMassPerSquareTimeUnit - SquareMassPerSquareTimeUnit + + NewtonSquareMetrePerAmpereUnit + NewtonSquareMetrePerAmpereUnit - - - - Letter - Letter + + + + Java + Java + + + + The universe is considered as a causally self-connected object, encompassing all other objects. For this reason is unique. + universe + universe + The universe is considered as a causally self-connected object, encompassing all other objects. For this reason is unique. + + + + + + + @@ -25835,20 +25779,6 @@ J stands for N m Daniele Toti - - - - The universe is considered as a causally self-connected object, encompassing all other objects. For this reason is unique. - universe - universe - The universe is considered as a causally self-connected object, encompassing all other objects. For this reason is unique. - - - - - - - @@ -25865,14 +25795,14 @@ J stands for N m Indicate a resource that might provide additional information about the subject resource. - - + + - 1 + 2 @@ -25880,7 +25810,7 @@ J stands for N m - 1 + 1 @@ -25896,7 +25826,7 @@ J stands for N m - 1 + 3 @@ -25912,19 +25842,19 @@ J stands for N m - 1 + 4 - 3 + 1 - 1 + 1 - 2 + 1 @@ -25932,72 +25862,27 @@ J stands for N m - 4 + 1 - - - - Free forming is pressure forming with tools that do not or only partially contain the shape of the workpiece and move against each other (from: DIN 8583 Part 3/05.70). - DIN 65099-3:1989-11 - - - - - - Product - From Latin productum ‘something produced’, derived from Latin producere, from pro- ‘forward’ + ducere ‘to lead’. - - - - - - Process consisting of two steps: - first, the steel is heated in a quenching treatment to a temperature above Ac3 and then rapidly cooled in a liquid to produce a process-specific grain structure; - subsequently, the steel is heated to a specific temperature during tempering to set the desired property and cooled in air. - DIN EN 10210-3:2020-11 - - - - - - Model - From Latin modus (“measure”). - - - - - - Assemblying - From Old French asembler, based on Latin ad- ‘to’ + simul ‘together’. - - - + - - - - - - - - - - - + - + @@ -26005,8 +25890,24 @@ J stands for N m + Enforcing exclusivity between overlapping and causality. + + + + + + + + + + + + + + + @@ -26045,62 +25946,44 @@ J stands for N m - + - Procedure - From Latin pro-cedere (“to go forward, to proceed”). + FundamentalBoson + 1940s: named after S.N. Bose. - - - Artifact - From Latin arte ‘by or using art’ + factum ‘something made’. + + + A program is a sequence of instructions understandable by a computer's central processing unit (CPU) that indicates which operations the computer should perform on a set of data. + http://www.linfo.org/program.html - - - Machining in which a tool is used whose number of cutting edges, geometry of the cutting wedges and position of the cutting edges in relation to the workpiece are determined - DIN 8589-0:2003-09 + + + CausalSystem + From Latin causa (“reason, sake, cause”), and Ancient Greek σύστημα (sústēma, “musical scale; organized body; whole made of several parts or members”), from σῠν- (sun-, prefix meaning ‘with, together’) + ἵστημι (hístēmi, “to stand”). - - - - - - - - - - - - - + + + + Boson + 1940s: named after S.N. Bose. + - + - - - - - - - - - - - - + @@ -26114,66 +25997,8 @@ J stands for N m - Implementation of equality based on mereology. - - - - PhysicalObject - From Latin physica "study of nature" (and Ancient Greek φυσικός, “natural”), and Medieval Latin obiectum (“object”, literally “thrown against”). - - - - - - ISO 3252:2019 Powder metallurgy -loose-powder sintering, gravity sintering: sintering of uncompacted powder - https://www.iso.org/obp/ui/#iso:std:iso:3252:ed-5:v1:en:term:3.3.33 - - - - - - A program is a sequence of instructions understandable by a computer's central processing unit (CPU) that indicates which operations the computer should perform on a set of data. - http://www.linfo.org/program.html - - - - - - Axiom not included in the theory because of OWL 2 DL global restrictions for decidability. - https://www.w3.org/TR/2012/REC-owl2-syntax-20121211/#Global_Restrictions_on_Axioms_in_OWL_2_DL - - - - - - Cutting with circular or straight cutting motion, using a multi-toothed tool of small cutting width, the cutting motion being performed by the tool - DIN 8589-6:2003-09 - - - - - - Whole - From Middle English hole (“healthy, unhurt, whole”). - - - - - - The subject of condensed matter physics that deals with the macroscopic and microscopic physical properties of matter, especially the solid and liquid phases which arise from electromagnetic forces between atoms. More generally, the subject deals with "condensed" phases of matter: systems of many constituents with strong interactions between them. - https://en.wikipedia.org/wiki/Condensed_matter_physics - - - - - - Item - From Latin item, "likewise, just so, moreover". - - @@ -26182,391 +26007,328 @@ loose-powder sintering, gravity sintering: sintering of uncompacted powder - - - Differential Pulse Voltammetry in which small potential pulses are superimposed onto a linearly varying potential. - J. M. Pingarrón et al., Terminology of electrochemical methods of analysis (IUPAC Recommendations 2019), Pure and Applied Chemistry, 4, 92, 2020, 641-694. https://doi.org/10.1515/pac-2018-0109 + + + Estimation + From Latin aestimatus (“to value, rate, esteem”). - - - The EMMO conceptualises the world using the primitive concepts of causality and parthood. Parthood is about the composition of world entities starting from other more fundamental entities. Causality is about the interactions between world entities. -The quantum is the smallest indivisible part of any world entity. Quantum individuals are the fundamental causal constituents of the universe, since it is implied that causality originates from quantum-to-quantum interactions. Quantums are no-dimensional, and their aggregation makes spacetime emerge from their causal structure. Causality between macro entities (i.e. entities made of more than one quantum) is explained as the sum of the causality relations between their quantum constituents. -The fundamental distinction between world entities is direct causality self-connectedness: a world entity can be self-connected xor not self-connected depending on the causality network of its fundamental components. -Void regions do not exist in the EMMO, or in other words there is no spacetime without entities, since space and time are measured quantities following a causality relation between entities (spacetime emerges as relational property not as a self-standing entity). -Entities are not placed in space or time: space and time are always relative between entities and are measured. In other words, space and time relations originates from causality interactions. - While EMMO mereocausality conceptualisation can be used on any possibile domain, so that a quantum can be a Lego brick or an furniture component, it can be better understood when a quantum is elucidated as the smallest measured time interval of existence of an elementary particle (e.g. quark, photon). + + + Machining with a circular cutting movement, usually associated with a multi-toothed tool, and with a feed movement perpendicular or oblique to the axis of rotation of the tool, to produce any workpiece surface. + DIN 8589-3:2003-09 - + - Process for joining two (base) materials by means of an adhesive polymer material - DIN EN 62047-1:2016-12 + In Peirce semiotics three subtypes of icon are possible: +(a) the image, which depends on a simple quality (e.g. picture) +(b) the diagram, whose internal relations, mainly dyadic or so taken, represent by analogy the relations in something (e.g. math formula, geometric flowchart) +(c) the metaphor, which represents the representative character of a sign by representing a parallelism in something else +[Wikipedia] + https://en.wikipedia.org/wiki/Semiotic_theory_of_Charles_Sanders_Peirce#II._Icon,_index,_symbol - + - CausalPath - From Ancient Greek πάτος (pátos, “path”). + Manufacturing + From Latin manu factum ("made by hand"). - - - Heat treatment process that generally produces martensite in the matrix. - ISO/TR 10809-1:2009, 0000_19 + + + In manufacturing, a workpiece is a single, delimited part of largely solid material that is processed in some form (e.g. stone ). + https://de.wikipedia.org/wiki/Werkst%C3%BCck - + - Equipment - From French équipement, from équiper ‘equip’. - - - - - - CausalParticle + Particle From Latin particula (“small part, particle”), diminutive of pars (“part, piece”). - - - (according to DIN 8200) Shot peening to generate residual compressive stresses in layers of the blasting material close to the surface in order to improve certain component properties, e.g. fatigue strength, corrosion resistance, wear resistance (from: DIN 8200:1982) - DIN 65099-7:1989-11 - - - - + - application of scientific knowledge, tools, techniques, crafts, systems or methods of organization in order to solve a problem or achieve an objective - EN 16603-11:2019-11 - - - - - - ElementaryParticle - From Latin elementārius (“elementary”), from elementum (“one of the four elements of antiquity; fundamentals”). + Method of joining metallic materials with the aid of a molten filler metal (solder), optionally with the use of flow agents + DIN 55405:2014-12 - + - ManufacturedProduct - From Latin manufacture: "made by hand". - - - - - - Software is usually used as a generic term for programs. However, in its broadest sense it can refer to all information (i.e., both programs and data) in electronic form and can provide a distinction from hardware, which refers to computers or other electronic systems on which software can exist and be use. -Here we explicitly include in the definition also all the data (e.g. source code, script files) that takes part to the building of the executable, are necessary to the execution of a program or that document it for the users. - http://www.linfo.org/program.html + Role + From French rôle, from obsolete French roule ‘roll’, referring originally to the roll of paper on which the actor's part was written. - + - Observation - From Latin observare (“to watch, note, mark, heed, guard, keep, pay attention to, regard, comply with, etc.”), from ob (“before”) + servare (“to keep”), - - - - - - Forming of a solid body, whereby the plastic state is essentially brought about by a bending stress - DIN 8586:2003-09 + Property + From Latin proprietas (“a peculiarity, one's peculiar nature or quality, right or fact of possession, property”), from proprius (“special, particular, one's own”). - - - - chronopotentiometry where the applied current is changed in steps - J. M. Pingarrón et al., Terminology of electrochemical methods of analysis (IUPAC Recommendations 2019), Pure and Applied Chemistry, 4, 92, 2020, 641-694. https://doi.org/10.1515/pac-2018-0109. - + + + + + + + + + + + + + + + + + + + + + + + + + Enforcing parthood reflexivity. + - - - chronopotentiometry where the applied current is changed linearly - J. M. Pingarrón et al., Terminology of electrochemical methods of analysis (IUPAC Recommendations 2019), Pure and Applied Chemistry, 4, 92, 2020, 641-694. https://doi.org/10.1515/pac-2018-0109. + + + AnalogicalIcon + From Ancient Greek ἀναλογία (analogía), from ἀνά (aná) + λόγος (lógos, “speech, reckoning”). - - - Forming of a solid body, whereby the plastic state is essentially brought about by a combined tensile and compressive stress. - DIN 8584-1:2003-09 + + + + + + + + + + + + + All EMMO individuals are part of the most comprehensive entity which is the universe. - + - Quantum - From Latin quantum (plural quanta) "as much as, so much as". - - - - - - Heat to a temperature appropriate for the particular material, maintain at that temperature and then cool at an appropriate rate to reduce hardness, improve machinability or achieve desired properties. - DIN EN ISO 15156-3:2015-12 + CausalParticle + From Latin particula (“small part, particle”), diminutive of pars (“part, piece”). - + - Computation - From Latin con- +‎ putō (“I reckon”). + ResemblanceIcon + From Old French sambler, sembler, from Late Latin similāre, present active infinitive of similō, from Latin similis, from Proto-Italic *semalis, from Proto-Indo-European *sem- (“together, one”). - - - Strengthening by rolling is the strengthening of component surfaces by mechanically generating compressive stresses in the component surface and consolidating the material. - DIN 65099-7:1989-11 + + + EMMO + EMMO is the acronym of Elementary Multiperspective Material Ontology. - - - Role - From French rôle, from obsolete French roule ‘roll’, referring originally to the roll of paper on which the actor's part was written. + + + A variable is a symbolic object that stands for any other mathematical object, such as number, a vector, a matrix, a function, the argument of a function, a set, an element of a set. + https://en.wikipedia.org/wiki/Variable_(mathematics) - + - CausalStructure - From Latin causa (“reason, sake, cause”), and from Latin struere (“arrange, assemble, build”). + IntentionalProcess + From Latin intentionem, derived from intendere ("stretching out") - - - Language - From Latin lingua (“tongue, speech, language”), from Old Latin dingua (“tongue”). + + + Process for joining two (base) materials by means of an adhesive polymer material + DIN EN 62047-1:2016-12 - + - Lifetime - From Middle English liftime, equivalent to life +‎ time. + Model + From Latin modus (“measure”). - - - - - - - - - Every entity is made of quantum parts. This axiomatisation is the expression of the radical reductionistic approach of the EMMO. + + + ISO 18435-1:2009 +manufacturing process: set of processes in manufacturing involving a flow and/or transformation of material, information, energy, control, or any other element in a manufacturing area + https://www.iso.org/obp/ui/#iso:std:iso:18435:-1:ed-1:v1:en:term:3.16 - - - electrochemical method where traces of solid particles are abrasively transferred onto the surface of an electrode, followed by an electrochemical dissolution (anodic or cathodic dissolution) that is recorded as a current–voltage curve - Scholz F, Nitschke L, Henrion G (1989) Naturwiss 76:71; + + + fabrication of objects through the deposition of a material using a print head, nozzle or another printer technology +Note 1 to entry: This term is often used in a non-technical context synonymously with additive manufacturing (3.1.2) and, in these cases, typically associated with machines used for non-industrial purposes including personal use. + ISO/ASTM 52900:2021(en), 3.3.1 - - - Part - From Latin partire, partiri ‘divide, share’. + + + ISO/ASTM TR 52906:2022 Additive manufacturing +sintering: process of heating a powder metal compact to increase density and/or improve mechanical properties via solid state diffusion + https://www.iso.org/obp/ui/#iso:std:iso-astm:tr:52906:ed-1:v1:en:term:3.9 - - - Tool - Old English tōl, from a Germanic base meaning ‘prepare’. + + + Cutting with circular or straight cutting motion, using a multi-toothed tool of small cutting width, the cutting motion being performed by the tool + DIN 8589-6:2003-09 - - - A collective term for the processes in which, during joining, the parts to be joined and any auxiliary parts are essentially only elastically deformed and unintentional loosening is prevented by frictional connection. - DIN 8593-3:2003-09 + + + Elementary + From Latin elementārius (“elementary”), from elementum (“one of the four elements of antiquity; fundamentals”). - - - The permanent joining or other bringing together of two or more workpieces of a geometric shape or of similar workpieces with shapeless material. In each case, the cohesion is created locally and increased as a whole. - DIN 8593-0:2003-09 + + + CausalStructure + From Latin causa (“reason, sake, cause”), and from Latin struere (“arrange, assemble, build”). - - - - - - - - - - - - - - - - - - - - - - - - - - Ensure that the hasNext relation expresses a strictly one-way causality arrow between two entities. - - - - - Object that is processed with a machine - DIN EN ISO 5349-2:2015-12 + + + chronopotentiometry where the change in applied current undergoes a cyclic current reversal + J. M. Pingarrón et al., Terminology of electrochemical methods of analysis (IUPAC Recommendations 2019), Pure and Applied Chemistry, 4, 92, 2020, 641-694. https://doi.org/10.1515/pac-2018-0109. - + - Collection - From Latin collectio, from colligere ‘gather together’. + FunctionalIcon + From Latin functiō (“performance, execution”), from functus, perfect participle of fungor (“to perform, execute, discharge”). - - - A supply chain is a system of organizations, people, activities, information, and resources involved in supplying a product or service to a consumer. - https://en.wikipedia.org/wiki/Supply_chain + + + CausalChain + From Old French chaine, chaene (“chain”), from Latin catēna (“chain”). - - - Source code (also referred to as source or code) is the version of software as it is originally written (i.e., typed into a computer) by a human in plain text (i.e., human readable alphanumeric characters). - http://www.linfo.org/source_code.html + + + Manufacturing by separating particles of material from a solid body by non-mechanical means. Ablation refers both to the removal of layers of material and to the separation of workpiece parts. The production process of ablation is considered in its stationary instantaneous state, independently of the application of auxiliary processes necessary to initiate the process. Ablation is divided into three subgroups according to the order point of view (OGP) "process in the effective zone on the surface of the workpiece": - thermal ablation; - chemical ablation; - electrochemical ablation. + DIN 8590 Berichtigung 1:2004-02 - + - A Uniform Resource Identifier (URI) is a compact sequence of characters that identifies an abstract or physical resource. + The term "Uniform Resource Locator" (URL) refers to the subset of URIs that, in addition to identifying a resource, provide a means of locating the resource by describing its primary access mechanism (e.g., its network "location"). https://www.ietf.org/rfc/rfc3986.txt - - - - - - - - - - - - - - - - - - - - - - - - - Enforcing the fact that an entity cannot cause itself. - - - - - - mereological - Coined by Stanisław Leśniewski in 1927, from Ancient Greek μέρος (méros, “part”) +‎ -logy (“study, discussion, science”). -https://en.wiktionary.org/wiki/mereology - - - + - + + + + + + + + + + + + - + + - - + + + Transitivity for proper parthood. - - - Wholistic - From the word 'holistic' with the 'w-' prefix, due to the affinity with the existing word 'whole', that share the same meaning of 'holos'. + + + method of electroanalytical chemistry used to separate by electrolyse ions of a substance and to derive the amount of this substance from the increase in mass of an electrode. + International Electrotechnical Commission (IEC), IEC 60050 - International Electrotechnical Vocabulary, retrieved from: https://www.electropedia.org - - - application of scientific knowledge, tools, techniques, crafts or systems in order to solve a problem or to achieve an objective which can result in a product or process - ISO 14034:2016-11 + + + A Uniform Resource Identifier (URI) is a compact sequence of characters that identifies an abstract or physical resource. + https://www.ietf.org/rfc/rfc3986.txt - - - ISO/ASTM TR 52906:2022 Additive manufacturing -sintering: process of heating a powder metal compact to increase density and/or improve mechanical properties via solid state diffusion - https://www.iso.org/obp/ui/#iso:std:iso-astm:tr:52906:ed-1:v1:en:term:3.9 + + + Conversion of materials and assembly of components for the manufacture of products + DIN EN 14943:2006-03 - - - The disjoint union of the Item and Collection classes. - The union implies that world entities can only be items or collections (standing for a collection of causally disconnected items). -Disjointness means that a collection cannot be an item and viceversa, representing the fact that a world entity cannot be causally self-connected and non-self connected at the same time. + + + A supply chain is a system of organizations, people, activities, information, and resources involved in supplying a product or service to a consumer. + https://en.wikipedia.org/wiki/Supply_chain - + - The term "Uniform Resource Locator" (URL) refers to the subset of URIs that, in addition to identifying a resource, provide a means of locating the resource by describing its primary access mechanism (e.g., its network "location"). - https://www.ietf.org/rfc/rfc3986.txt + A material is a crystal if it has essentially a sharp diffraction pattern. + +A solid is a crystal if it has essentially a sharp diffraction pattern. The word essentially means that most of the intensity of the diffraction is concentrated in relatively sharp Bragg peaks, besides the always present diffuse scattering. In all cases, the positions of the diffraction peaks can be expressed by + + +H=∑ni=1hia∗i (n≥3) + https://dictionary.iucr.org/Crystal @@ -26577,250 +26339,237 @@ Disjointness means that a collection cannot be an item and viceversa, representi - - - We call "decoding" the act of recognise the variation according to a particular rule and generate another equivalent schema (e.g. in the agent's cognitive apparatus, as another form of data). -We call "interpreting" the act of providing semantic meaning to data, which is covered by the semiotic perspective. - The electronical state of the RAM of my laptop is decoded by it as ASCII characters and printed on the screen. - - - - - - Engineered - From Latin ingenium "innate qualities, ability; inborn character," in Late Latin "a war engine, battering ram"; literally "that which is inborn," from in- ("in") + gignere ("give birth, beget"). + + + Forming of a solid body, whereby the plastic state is essentially brought about by a combined tensile and compressive stress. + DIN 8584-1:2003-09 - - - Forming of vessel parts from a flat mould into a three-dimensional shape by means of a press and tools, whereby material is neither removed nor added - DIN EN 13831:2007-12 + + + ISO 3252:2019 Powder metallurgy +reaction sintering: process wherein at least two constituents of a powder mixture react during sintering + https://www.iso.org/obp/ui/#iso:std:iso:3252:ed-5:v1:en:term:3.3.55 - - - machining with a circular cutting movement in which the axis of rotation of the tool and the axis of the internal surface to be produced are identical and the feed movement is in the direction of this axis. The axis of rotation of the cutting movement maintains its position relative to the workpiece independently of the feed movement (axis of rotation workpiece-bound). - DIN 8589-2:2003-09 + + + PhysicalObject + From Latin physica "study of nature" (and Ancient Greek φυσικός, “natural”), and Medieval Latin obiectum (“object”, literally “thrown against”). - - - Perspective - From medieval Latin perspectiva ‘(science of) optics’, from perspect- ‘looked at closely’, from the verb perspicere, from per- ‘through’ + specere ‘to look’. + + + Software is usually used as a generic term for programs. However, in its broadest sense it can refer to all information (i.e., both programs and data) in electronic form and can provide a distinction from hardware, which refers to computers or other electronic systems on which software can exist and be use. +Here we explicitly include in the definition also all the data (e.g. source code, script files) that takes part to the building of the executable, are necessary to the execution of a program or that document it for the users. + http://www.linfo.org/program.html - - - Estimation - From Latin aestimatus (“to value, rate, esteem”). + + + Thermal ablation is the separation of material particles in solid, liquid or gaseous state by heat processes as well as the removal of these material particles by mechanical or electromagnetic forces (from: DIN + DIN 65099-4:1989-11 - - - - - - - 2 - - - Every collection has at least two item members, since a collection of one item is a self-connected entity (and then an item). + + + A collective term for the processes in which, during joining, the parts to be joined and any auxiliary parts are essentially only elastically deformed and unintentional loosening is prevented by frictional connection. + DIN 8593-3:2003-09 - - - Elementary - From Latin elementārius (“elementary”), from elementum (“one of the four elements of antiquity; fundamentals”). + + + Software + From soft +‎ -ware, by contrast with hardware (“the computer itself”). Coined by Paul Niquette in 1953. - - - Shot peening is shot peening for shaping or straightening workpieces by introducing residual compressive stresses (from: DIN 8200/10.82). - DIN 65099-3:1989-11 + + + Cogniser + From Latin cognitio (“knowledge, perception, a judicial examination, trial”), from cognitus, past participle of cognoscere (“to know”), from co- (“together”) + *gnoscere, older form of noscere (“to know” - + - A measurement is the process of experimentally obtaining one or more measurement results that can reasonably be attributed to a quantity. - https://www.iso.org/standard/45324.html + Technology refers to methods, systems, and devices which are the result of scientific knowledge being used for practical purposes. + https://www.collinsdictionary.com/it/dizionario/inglese/technology - - - Process for removing unwanted residual or waste material from a given product or material - ISO 13574:2015-02 + + + ElementaryParticle + From Latin elementārius (“elementary”), from elementum (“one of the four elements of antiquity; fundamentals”). - + - Index - From Latin index (“a discoverer, informer, spy; of things, an indicator, the forefinger, a title, superscription”), from indicō (“point out, show”). + mereological + Coined by Stanisław Leśniewski in 1927, from Ancient Greek μέρος (méros, “part”) +‎ -logy (“study, discussion, science”). +https://en.wiktionary.org/wiki/mereology - - - - - - - - - - - - - All EMMO individuals are part of the most comprehensive entity which is the universe. + + + the stripping potentiogram shows staircase curves of potential as a function of time. Frequently, the first derivative is displayed (dE/dt=f(t)), as this produces peak-shaped signals. The time between transitions (peaks) is proportional to the concentration of analyte in the test solution + J. M. Pingarrón et al., Terminology of electrochemical methods of analysis (IUPAC Recommendations 2019), Pure and Applied Chemistry, 4, 92, 2020, 641-694. https://doi.org/10.1515/pac-2018-0109 - - - CausalSystem - From Latin causa (“reason, sake, cause”), and Ancient Greek σύστημα (sústēma, “musical scale; organized body; whole made of several parts or members”), from σῠν- (sun-, prefix meaning ‘with, together’) + ἵστημι (hístēmi, “to stand”). + + + electrochemical method where traces of solid particles are abrasively transferred onto the surface of an electrode, followed by an electrochemical dissolution (anodic or cathodic dissolution) that is recorded as a current–voltage curve + Scholz F, Nitschke L, Henrion G (1989) Naturwiss 76:71; - - - Existent - ex-sistere (latin): to stay (to persist through time) outside others of the same type (to be distinct from the rest). + + + hardening of a workpiece caused by the precipitation of one or more compounds from a supersaturated solid solution + ISO 4885:2018-02 - - - Software - From soft +‎ -ware, by contrast with hardware (“the computer itself”). Coined by Paul Niquette in 1953. + + + :isCauseOf owl:propertyDisjointWith :overlaps + Due to the transitivity characteristic of :overlaps subclasses, that makes it a composite property. - - - ElementaryParticle - From Latin elementārius (“elementary”), from elementum (“one of the four elements of antiquity; fundamentals”). + + + Wholistic + From the word 'holistic' with the 'w-' prefix, due to the affinity with the existing word 'whole', that share the same meaning of 'holos'. - + - historically for the analysis of metal ions, mercury ions were added to the test solution to form a mercury amalgam when reduced. Alternatively, an HMDE or MFE was used and the oxidizing agent added after amalgam formation. However, the toxicity of mercury and its compounds have all but precluded the present-day use of mercury - J. M. Pingarrón et al., Terminology of electrochemical methods of analysis (IUPAC Recommendations 2019), Pure and Applied Chemistry, 4, 92, 2020, 641-694. https://doi.org/10.1515/pac-2018-0109 + A measurement is the process of experimentally obtaining one or more measurement results that can reasonably be attributed to a quantity. + https://www.iso.org/standard/45324.html - + - Conversion of materials and assembly of components for the manufacture of products - DIN EN 14943:2006-03 + The raw material or partially finished piece that is shaped by performing various operations. + https://en.wiktionary.org/wiki/workpiece - - - ISO 8887-1:2017 -manufacturing: production of components - https://www.iso.org/obp/ui/#iso:std:iso:8887:-1:ed-1:v1:en:term:3.1.5 + + + Procedure + From Latin pro-cedere (“to go forward, to proceed”). - + - Treatment carried out after hardening or case hardening consisting of cooling to a temperature below room temperature to complete the transformation of austenite to martensite - DIN EN ISO 4885:2018-07 + heat treatment consisting of heating and soaking at a suitable temperature, followed by cooling under conditions such that, after return to ambient temperature, the metal will be in a structural state closer to that of equilibrium + EN 10028-1:2017-07 - - - A material is a crystal if it has essentially a sharp diffraction pattern. - -A solid is a crystal if it has essentially a sharp diffraction pattern. The word essentially means that most of the intensity of the diffraction is concentrated in relatively sharp Bragg peaks, besides the always present diffuse scattering. In all cases, the positions of the diffraction peaks can be expressed by - - -H=∑ni=1hia∗i (n≥3) - https://dictionary.iucr.org/Crystal + + + Forming of a solid body, whereby the plastic state is essentially brought about by a bending stress + DIN 8586:2003-09 - - - method of electroanalytical chemistry used to separate by electrolyse ions of a substance and to derive the amount of this substance from the increase in mass of an electrode. - International Electrotechnical Commission (IEC), IEC 60050 - International Electrotechnical Vocabulary, retrieved from: https://www.electropedia.org + + + Artifact + From Latin arte ‘by or using art’ + factum ‘something made’. + + + + + + + + + + + + + + + + + + + + + + + + + Enforcing the fact that an entity cannot cause itself. + + - + - process of joining materials to make parts from 3D model data, usually layer upon layer, as opposed to subtractive manufacturing (3.1.29) and formative manufacturing methodologies, - ISO 23704-1:2022(en), 3.1.2 - - - - - - measurand - VIM defines measurand as a quantity intended to be measured. This is redundant in EMMO and correspond to Quantity. + We call "decoding" the act of recognise the variation according to a particular rule and generate another equivalent schema (e.g. in the agent's cognitive apparatus, as another form of data). +We call "interpreting" the act of providing semantic meaning to data, which is covered by the semiotic perspective. + The electronical state of the RAM of my laptop is decoded by it as ASCII characters and printed on the screen. - - - FundamentalBoson - 1940s: named after S.N. Bose. + + + CEN Workshop Agreement – CWA 17284 “Materials modelling – terminology, classification and metadata” + https://emmc.info/wp-content/uploads/2018/05/CWA_17284.pdf - - - Data - From Latin data, nominative plural of datum (“that is given”), neuter past participle of dō (“I give”). + + + Manufacturing by changing the properties of the material of which a workpiece is made, which is done, among other things, by changes in the submicroscopic or atomic range, e.g. by diffusion of atoms, generation and movement of dislocations in the atomic lattice or chemical reactions, and where unavoidable changes in shape are not part of the essence of these processes. + DIN 8580:2022-12 - - the accumulation is similar to that used in stripping voltammetry + + two-step electrochemical measurement in which 1) material is accumulated at an electrode and 2) the material is removed by chemical reaction or electrochemically at constant current with measurement of electrode potential J. M. Pingarrón et al., Terminology of electrochemical methods of analysis (IUPAC Recommendations 2019), Pure and Applied Chemistry, 4, 92, 2020, 641-694. https://doi.org/10.1515/pac-2018-0109 - - - ISO 3252:2019 Powder metallurgy -reaction sintering: process wherein at least two constituents of a powder mixture react during sintering - https://www.iso.org/obp/ui/#iso:std:iso:3252:ed-5:v1:en:term:3.3.55 + + + Treatment carried out after hardening or case hardening consisting of cooling to a temperature below room temperature to complete the transformation of austenite to martensite + DIN EN ISO 4885:2018-07 - - - Manufacturing by separating particles of material from a solid body by non-mechanical means. Ablation refers both to the removal of layers of material and to the separation of workpiece parts. The production process of ablation is considered in its stationary instantaneous state, independently of the application of auxiliary processes necessary to initiate the process. Ablation is divided into three subgroups according to the order point of view (OGP) "process in the effective zone on the surface of the workpiece": - thermal ablation; - chemical ablation; - electrochemical ablation. - DIN 8590 Berichtigung 1:2004-02 + + + A tessellation (or tiling) is the covering of a surface, often a plane, using one or more geometric shapes, called tiles, with no overlaps and no gaps. + https://en.wikipedia.org/wiki/Tessellation - + - ResemblanceIcon - From Old French sambler, sembler, from Late Latin similāre, present active infinitive of similō, from Latin similis, from Proto-Italic *semalis, from Proto-Indo-European *sem- (“together, one”). - - - - - - the time between changes in potential in step 2 is related to the concentration of analyte in the solution - J. M. Pingarrón et al., Terminology of electrochemical methods of analysis (IUPAC Recommendations 2019), Pure and Applied Chemistry, 4, 92, 2020, 641-694. https://doi.org/10.1515/pac-2018-0109 + ManufacturedProduct + From Latin manufacture: "made by hand". @@ -26828,87 +26577,70 @@ reaction sintering: process wherein at least two constituents of a powder mixtur - + - - - - - - - - - - - - + - - - + + + - Transitivity for proper parthood. + Ensure that the hasNext relation expresses a strictly one-way causality arrow between two entities. - + - Icon - From Ancient Greek εἰκών (eikṓn, “likeness, image, portrait”). + Existent + ex-sistere (latin): to stay (to persist through time) outside others of the same type (to be distinct from the rest). - + - A manufacturing process in which metallic material is anodically dissolved under the influence of an electric current and an electrolyte solution. The current flow can be caused either by connection to an external current source or due to local element formation on the workpiece (etching). - DIN 8590 Berichtigung 1:2004-02 - - - - - - Property - From Latin proprietas (“a peculiarity, one's peculiar nature or quality, right or fact of possession, property”), from proprius (“special, particular, one's own”). + Widening is tensile forming to increase the circumference of a hollow body. A distinction is made between: Widening, bulging. + DIN 8585-3:2003-09 - + - Free forming is pressure forming with tools that do not or only partially contain the shape of the workpiece and move against each other. - DIN 65099-3:1989-11 + A manufacturing process in which metallic material is anodically dissolved under the influence of an electric current and an electrolyte solution. The current flow can be caused either by connection to an external current source or due to local element formation on the workpiece (etching). + DIN 8590 Berichtigung 1:2004-02 - - - action to disassemble a product or a component by removing all or some of its constituent parts with the intent to salvage - DIN EN 9110:2018-08 + + + Product + From Latin productum ‘something produced’, derived from Latin producere, from pro- ‘forward’ + ducere ‘to lead’. - - - hardening of a workpiece caused by the precipitation of one or more compounds from a supersaturated solid solution - ISO 4885:2018-02 + + + ISO 8887-1:2017 +manufacturing: production of components + https://www.iso.org/obp/ui/#iso:std:iso:8887:-1:ed-1:v1:en:term:3.1.5 - - - Cogniser - From Latin cognitio (“knowledge, perception, a judicial examination, trial”), from cognitus, past participle of cognoscere (“to know”), from co- (“together”) + *gnoscere, older form of noscere (“to know” + + + The set of established forms or methods of an organized body for accomplishing a certain task or tasks (Wiktionary). + https://en.wiktionary.org/wiki/procedure @@ -26950,151 +26682,113 @@ reaction sintering: process wherein at least two constituents of a powder mixtur Transitivity for parthood. - - - - Forming of a solid body, whereby the plastic state is essentially brought about by a bending stress. - DIN 8586:2003-09 - - - - - - Method of joining metallic materials with the aid of a molten filler metal (solder), optionally with the use of flow agents - DIN 55405:2014-12 - - - - - - Joining process by softening the surfaces to be joined, either by heat or with a solvent (swelling welding, solvent welding), and pressing the softened surfaces together. - DIN EN 13956:2013-03 - - - - - - :isCauseOf owl:propertyDisjointWith :overlaps - Due to the transitivity characteristic of :overlaps subclasses, that makes it a composite property. - - - - - - Metrology is the science of measurement and its application and includes all theoretical and practical aspects of measurement, whatever the measurement uncertainty and field of application (VIM3 2.2) - https://www.bipm.org/documents/20126/2071204/JCGM_200_2012.pdf - - - - In Peirce semiotics three subtypes of icon are possible: -(a) the image, which depends on a simple quality (e.g. picture) -(b) the diagram, whose internal relations, mainly dyadic or so taken, represent by analogy the relations in something (e.g. math formula, geometric flowchart) -(c) the metaphor, which represents the representative character of a sign by representing a parallelism in something else -[Wikipedia] - https://en.wikipedia.org/wiki/Semiotic_theory_of_Charles_Sanders_Peirce#II._Icon,_index,_symbol - - - - - - The set of established forms or methods of an organized body for accomplishing a certain task or tasks (Wiktionary). - https://en.wiktionary.org/wiki/procedure - - - - - - All or part of the programs, procedures, rules, and associated documentation of an information processing system. - https://www.iso.org/obp/ui/fr/#iso:std:iso-iec:2382:-1:ed-3:en - - - - - - isCauseOf - From Latin causa (“reason, sake, cause”). - - - - - - Cutting workpieces between two cutting edges that move past each other (see Figure 1 [see figure in the standard]). - DIN 8588:2013-08 - - - - - Particle - From Latin particula (“small part, particle”), diminutive of pars (“part, piece”). + Simulacrum + From Latin simulacrum ("likeness, semblance") - - - IntentionalProcess - From Latin intentionem, derived from intendere ("stretching out") - - - - - - - - - - - - - - - - + + + In the physical sciences, a phase is a region of space (a thermodynamic system), throughout which all physical properties of a material are essentially uniform. Examples of physical properties include density, index of refraction, magnetization and chemical composition. A simple description is that a phase is a region of material that is chemically uniform, physically distinct, and (often) mechanically separable. In a system consisting of ice and water in a glass jar, the ice cubes are one phase, the water is a second phase, and the humid air is a third phase over the ice and water. The glass of the jar is another separate phase. + +The term phase is sometimes used as a synonym for state of matter, but there can be several immiscible phases of the same state of matter. Also, the term phase is sometimes used to refer to a set of equilibrium states demarcated in terms of state variables such as pressure and temperature by a phase boundary on a phase diagram. Because phase boundaries relate to changes in the organization of matter, such as a change from liquid to solid or a more subtle change from one crystal structure to another, this latter usage is similar to the use of "phase" as a synonym for state of matter. However, the state of matter and phase diagram usages are not commensurate with the formal definition given above and the intended meaning must be determined in part from the context in which the term is used. + https://en.wikipedia.org/wiki/Phase_(matter) + - - - Type of scratching behaviour where the scratching force and the (displacement) deflection of the scratching tip are constant over the scratching distance during the test. - DIN EN ISO 472/A1:2019-03 + + + Whole + From Middle English hole (“healthy, unhurt, whole”). - - - Technology refers to methods, systems, and devices which are the result of scientific knowledge being used for practical purposes. - https://www.collinsdictionary.com/it/dizionario/inglese/technology + + + Language + From Latin lingua (“tongue, speech, language”), from Old Latin dingua (“tongue”). - - - CEN Workshop Agreement – CWA 17284 “Materials modelling – terminology, classification and metadata” - https://emmc.info/wp-content/uploads/2018/05/CWA_17284.pdf + + + Matter + From Latin materia (“matter, stuff, material”), from mater (“mother”). + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - chronopotentiometry where the change in applied current undergoes a cyclic current reversal - J. M. Pingarrón et al., Terminology of electrochemical methods of analysis (IUPAC Recommendations 2019), Pure and Applied Chemistry, 4, 92, 2020, 641-694. https://doi.org/10.1515/pac-2018-0109. + + + + + + + + + Every entity is made of quantum parts. This axiomatisation is the expression of the radical reductionistic approach of the EMMO. - - - Manufacturing - From Latin manu factum ("made by hand"). + + + Process for removing unwanted residual or waste material from a given product or material + ISO 13574:2015-02 - + - two-step electrochemical measurement in which 1) material is accumulated at an electrode and 2) the material is removed by chemical reaction or electrochemically at constant current with measurement of electrode potential + Differential Pulse Voltammetry in which small potential pulses are superimposed onto a linearly varying potential. J. M. Pingarrón et al., Terminology of electrochemical methods of analysis (IUPAC Recommendations 2019), Pure and Applied Chemistry, 4, 92, 2020, 641-694. https://doi.org/10.1515/pac-2018-0109 + + + + (according to DIN 8200) Shot peening to generate residual compressive stresses in layers of the blasting material close to the surface in order to improve certain component properties, e.g. fatigue strength, corrosion resistance, wear resistance (from: DIN 8200:1982) + DIN 65099-7:1989-11 + + @@ -27123,197 +26817,288 @@ reaction sintering: process wherein at least two constituents of a powder mixtur - - - In the physical sciences, a phase is a region of space (a thermodynamic system), throughout which all physical properties of a material are essentially uniform. Examples of physical properties include density, index of refraction, magnetization and chemical composition. A simple description is that a phase is a region of material that is chemically uniform, physically distinct, and (often) mechanically separable. In a system consisting of ice and water in a glass jar, the ice cubes are one phase, the water is a second phase, and the humid air is a third phase over the ice and water. The glass of the jar is another separate phase. + + + Free forming is pressure forming with tools that do not or only partially contain the shape of the workpiece and move against each other. + DIN 65099-3:1989-11 + -The term phase is sometimes used as a synonym for state of matter, but there can be several immiscible phases of the same state of matter. Also, the term phase is sometimes used to refer to a set of equilibrium states demarcated in terms of state variables such as pressure and temperature by a phase boundary on a phase diagram. Because phase boundaries relate to changes in the organization of matter, such as a change from liquid to solid or a more subtle change from one crystal structure to another, this latter usage is similar to the use of "phase" as a synonym for state of matter. However, the state of matter and phase diagram usages are not commensurate with the formal definition given above and the intended meaning must be determined in part from the context in which the term is used. - https://en.wikipedia.org/wiki/Phase_(matter) + + + + Quantum + From Latin quantum (plural quanta) "as much as, so much as". - - - Machine - From Latin māchina (“a machine, engine, contrivance, device, stratagem, trick”), from Doric Greek μᾱχᾰνᾱ́ (mākhanā́), cognate with Attic Greek μηχᾰνή (mēkhanḗ, “a machine, engine, contrivance, device”), from which comes mechanical. + + + Observation + From Latin observare (“to watch, note, mark, heed, guard, keep, pay attention to, regard, comply with, etc.”), from ob (“before”) + servare (“to keep”), - + + + measurand + VIM defines measurand as a quantity intended to be measured. This is redundant in EMMO and correspond to Quantity. + + + + - Widening is tensile forming to increase the circumference of a hollow body. A distinction is made between: Widening, bulging. - DIN 8585-3:2003-09 + Shot peening is shot peening for shaping or straightening workpieces by introducing residual compressive stresses (from: DIN 8200/10.82). + DIN 65099-3:1989-11 - + - Holistic - Holism (from Greek ὅλος holos "all, whole, entire"). + Icon + From Ancient Greek εἰκών (eikṓn, “likeness, image, portrait”). + + + + + + Machining in which a tool is used whose number of cutting edges, geometry of the cutting wedges and position of the cutting edges in relation to the workpiece are determined + DIN 8589-0:2003-09 + + + + + + the time between changes in potential in step 2 is related to the concentration of analyte in the solution + J. M. Pingarrón et al., Terminology of electrochemical methods of analysis (IUPAC Recommendations 2019), Pure and Applied Chemistry, 4, 92, 2020, 641-694. https://doi.org/10.1515/pac-2018-0109 + + + + + + + + + + 2 + + + Every collection has at least two item members, since a collection of one item is a self-connected entity (and then an item). - - + + - + + - + + + + + + + + + + + + - - + - - + + - Enforcing parthood reflexivity. + Implementation of equality based on mereology. - + - ISO 15531-1:2004 -discrete manufacturing: production of discrete items. - https://www.iso.org/obp/ui/#iso:std:iso:15531:-1:ed-1:v1:en:term:3.6.9 + ISO 3252:2019 Powder metallurgy +liquid-phase sintering: sintering of a powder or compact containing at least two constituents, under conditions such that a liquid phase is formed + https://www.iso.org/obp/ui/#iso:std:iso:3252:ed-5:v1:en:term:3.3.32 + + + + + + Device + From Old French "deviser", meaning: arrange, plan, contrive. Literally "dispose in portions," from Vulgar Latin "divisare", frequentative of Latin dividere, meaning "to divide". + + + + + + chronopotentiometry where the applied current is changed in steps + J. M. Pingarrón et al., Terminology of electrochemical methods of analysis (IUPAC Recommendations 2019), Pure and Applied Chemistry, 4, 92, 2020, 641-694. https://doi.org/10.1515/pac-2018-0109. + + + + + + Part + From Latin partire, partiri ‘divide, share’. + + + + + + ElementaryParticle + From Latin elementārius (“elementary”), from elementum (“one of the four elements of antiquity; fundamentals”). + + + + + + Machine + From Latin māchina (“a machine, engine, contrivance, device, stratagem, trick”), from Doric Greek μᾱχᾰνᾱ́ (mākhanā́), cognate with Attic Greek μηχᾰνή (mēkhanḗ, “a machine, engine, contrivance, device”), from which comes mechanical. + + + + + + ISO 3252:2019 Powder metallurgy +sintering: thermal treatment of a powder or compact, at a temperature below the melting point of the main constituent, for the purpose of increasing its strength by the metallurgical bonding of its particles + https://www.iso.org/obp/ui/#iso:std:iso:3252:ed-5:v1:en:term:3.3.60 + + + + + + Differential Pulse Voltammetry in which small potential pulses are superimposed onto a staircase potential ramp. + J. M. Pingarrón et al., Terminology of electrochemical methods of analysis (IUPAC Recommendations 2019), Pure and Applied Chemistry, 4, 92, 2020, 641-694. https://doi.org/10.1515/pac-2018-0109 - - - Dedomena - From Greek, nominative plural form of δεδομένο (dedoméno) (data, information) + + + a physical artifact, real or virtual, intended for subsequent transformation within some manufacturing operation + ISO 23952:2020(en), 3.4.143 - + - Removal of material by means of rigid or flexible discs or belts containing abrasives. - DIN EN 12258-1:2012-08 + Continuous or stepwise pressure forming with one or more rotating tools (rollers), without or with additional tools, e.g. plugs or mandrels, rods, guide tools + DIN 8583-2:2003-09 - - - CausalObject - From Latin causa (“reason, sake, cause”), and Medieval Latin obiectum (“object”, literally “thrown against”). + + + Strengthening by rolling is the strengthening of component surfaces by mechanically generating compressive stresses in the component surface and consolidating the material. + DIN 65099-7:1989-11 - - - A path is a string of characters used to uniquely identify a location in a directory structure according to a particular convention. - https://en.wikipedia.org/wiki/Path_(computing)#Universal_Naming_Convention + + + Verfestigen durch Umformen + DIN 8580:2022-12 - - - ISO 15531-1:2004 -manufacturing: function or act of converting or transforming material from raw material or semi-finished state to a state of further completion - https://www.iso.org/obp/ui/#iso:std:iso:15531:-1:ed-1:v1:en:term:3.6.22 + + + application of scientific knowledge, tools, techniques, crafts, systems or methods of organization in order to solve a problem or achieve an objective + EN 16603-11:2019-11 - - - - - - - - - - - - - - - - - - - - - - - - - - Enforcing exclusivity between overlapping and causality. - - - - - A variable is a symbolic object that stands for any other mathematical object, such as number, a vector, a matrix, a function, the argument of a function, a set, an element of a set. - https://en.wikipedia.org/wiki/Variable_(mathematics) + + + Index + From Latin index (“a discoverer, informer, spy; of things, an indicator, the forefinger, a title, superscription”), from indicō (“point out, show”). - - - Forming of a solid body, whereby the plastic state is essentially brought about by uniaxial or multiaxial compressive stress. - DIN 8583-1:2003-09 + + + Engineered + From Latin ingenium "innate qualities, ability; inborn character," in Late Latin "a war engine, battering ram"; literally "that which is inborn," from in- ("in") + gignere ("give birth, beget"). - - - Symbolic - From Ancient Greek σύμβολον (súmbolon, “a sign by which one infers something; a mark, token, badge, ticket, tally, check, a signal, watchword, outward sign”), from συμβάλλω (sumbállō, “I throw together, dash together, compare, correspond, tally, come to a conclusion”), from σύν (sún, “with, together”) + βάλλω (bállō, “I throw, put”). + + + Equipment + From French équipement, from équiper ‘equip’. - - - Thermal ablation is the separation of material particles in solid, liquid or gaseous state by heat processes as well as the removal of these material particles by mechanical or electromagnetic forces (from: DIN - DIN 65099-4:1989-11 + + + The subject of condensed matter physics that deals with the macroscopic and microscopic physical properties of matter, especially the solid and liquid phases which arise from electromagnetic forces between atoms. More generally, the subject deals with "condensed" phases of matter: systems of many constituents with strong interactions between them. + https://en.wikipedia.org/wiki/Condensed_matter_physics + + + + + + + + + + + + + + - - - ISO 3252:2019 Powder metallurgy -sintering: thermal treatment of a powder or compact, at a temperature below the melting point of the main constituent, for the purpose of increasing its strength by the metallurgical bonding of its particles - https://www.iso.org/obp/ui/#iso:std:iso:3252:ed-5:v1:en:term:3.3.60 + + + Metrology is the science of measurement and its application and includes all theoretical and practical aspects of measurement, whatever the measurement uncertainty and field of application (VIM3 2.2) + https://www.bipm.org/documents/20126/2071204/JCGM_200_2012.pdf - - - a physical artifact, real or virtual, intended for subsequent transformation within some manufacturing operation - ISO 23952:2020(en), 3.4.143 + + + Axiom not included in the theory because of OWL 2 DL global restrictions for decidability. + https://www.w3.org/TR/2012/REC-owl2-syntax-20121211/#Global_Restrictions_on_Axioms_in_OWL_2_DL - ISO 18435-1:2009 -manufacturing process: set of processes in manufacturing involving a flow and/or transformation of material, information, energy, control, or any other element in a manufacturing area - https://www.iso.org/obp/ui/#iso:std:iso:18435:-1:ed-1:v1:en:term:3.16 + ISO 15531-1:2004 +manufacturing: function or act of converting or transforming material from raw material or semi-finished state to a state of further completion + https://www.iso.org/obp/ui/#iso:std:iso:15531:-1:ed-1:v1:en:term:3.6.22 - - - FunctionalIcon - From Latin functiō (“performance, execution”), from functus, perfect participle of fungor (“to perform, execute, discharge”). + + + Mechanical separation of workpieces without the formation of shapeless material, i.e. also without chips (chipless). + DIN 8588:2013-08 - + + + Lifetime + From Middle English liftime, equivalent to life +‎ time. + + + + - Continuous or stepwise pressure forming with one or more rotating tools (rollers), without or with additional tools, e.g. plugs or mandrels, rods, guide tools - DIN 8583-2:2003-09 + Joining process by softening the surfaces to be joined, either by heat or with a solvent (swelling welding, solvent welding), and pressing the softened surfaces together. + DIN EN 13956:2013-03 @@ -27324,102 +27109,126 @@ manufacturing process: set of processes in manufacturing involving a flow and/or - - - ISO 3252:2019 Powder metallurgy -liquid-phase sintering: sintering of a powder or compact containing at least two constituents, under conditions such that a liquid phase is formed - https://www.iso.org/obp/ui/#iso:std:iso:3252:ed-5:v1:en:term:3.3.32 + + + Free forming is pressure forming with tools that do not or only partially contain the shape of the workpiece and move against each other (from: DIN 8583 Part 3/05.70). + DIN 65099-3:1989-11 - + + + The term "Uniform Resource Name" (URN) has been used historically to refer to both URIs under the "urn" scheme [RFC2141], which are required to remain globally unique and persistent even when the resource ceases to exist or becomes unavailable, and to any other URI with the properties of a name. + https://www.ietf.org/rfc/rfc3986.txt + + + + - Device - From Old French "deviser", meaning: arrange, plan, contrive. Literally "dispose in portions," from Vulgar Latin "divisare", frequentative of Latin dividere, meaning "to divide". + CausalPath + From Ancient Greek πάτος (pátos, “path”). - + - Variable - Fom Latin variabilis ("changeable"). + Symbolic + From Ancient Greek σύμβολον (súmbolon, “a sign by which one infers something; a mark, token, badge, ticket, tally, check, a signal, watchword, outward sign”), from συμβάλλω (sumbállō, “I throw together, dash together, compare, correspond, tally, come to a conclusion”), from σύν (sún, “with, together”) + βάλλω (bállō, “I throw, put”). - + + + CausalObject + From Latin causa (“reason, sake, cause”), and Medieval Latin obiectum (“object”, literally “thrown against”). + + + + - the stripping potentiogram shows staircase curves of potential as a function of time. Frequently, the first derivative is displayed (dE/dt=f(t)), as this produces peak-shaped signals. The time between transitions (peaks) is proportional to the concentration of analyte in the test solution - J. M. Pingarrón et al., Terminology of electrochemical methods of analysis (IUPAC Recommendations 2019), Pure and Applied Chemistry, 4, 92, 2020, 641-694. https://doi.org/10.1515/pac-2018-0109 + Forming of a solid body, whereby the plastic state is essentially brought about by shear stress. + DIN 8587:2003-09 - + - Matter - From Latin materia (“matter, stuff, material”), from mater (“mother”). + Holistic + Holism (from Greek ὅλος holos "all, whole, entire"). - - - The term "Uniform Resource Name" (URN) has been used historically to refer to both URIs under the "urn" scheme [RFC2141], which are required to remain globally unique and persistent even when the resource ceases to exist or becomes unavailable, and to any other URI with the properties of a name. - https://www.ietf.org/rfc/rfc3986.txt + + + Heat to a temperature appropriate for the particular material, maintain at that temperature and then cool at an appropriate rate to reduce hardness, improve machinability or achieve desired properties. + DIN EN ISO 15156-3:2015-12 - - - heat treatment consisting of heating and soaking at a suitable temperature, followed by cooling under conditions such that, after return to ambient temperature, the metal will be in a structural state closer to that of equilibrium - EN 10028-1:2017-07 + + + Item + From Latin item, "likewise, just so, moreover". - + - In manufacturing, a workpiece is a single, delimited part of largely solid material that is processed in some form (e.g. stone ). - https://de.wikipedia.org/wiki/Werkst%C3%BCck + Forming of a solid body, whereby the plastic state is essentially brought about by uniaxial or multiaxial compressive stress. + DIN 8583-1:2003-09 - - - Differential Pulse Voltammetry in which small potential pulses are superimposed onto a staircase potential ramp. - J. M. Pingarrón et al., Terminology of electrochemical methods of analysis (IUPAC Recommendations 2019), Pure and Applied Chemistry, 4, 92, 2020, 641-694. https://doi.org/10.1515/pac-2018-0109 + + + CEN Workshop Agreement – CWA 17284 “Materials modelling – terminology, classification and metadata” + https://emmc.info/wp-content/uploads/2018/05/CWA_17284.pdf - - - Boson - 1940s: named after S.N. Bose. + + + action to disassemble a product or a component by removing all or some of its constituent parts with the intent to salvage + DIN EN 9110:2018-08 - - - Verfestigen durch Umformen - DIN 8580:2022-12 + + + Object that is processed with a machine + DIN EN ISO 5349-2:2015-12 - + - Mechanical separation of workpieces without the formation of shapeless material, i.e. also without chips (chipless). - DIN 8588:2013-08 + Draw forming by drawing a workpiece through a tool opening that is narrowed in the drawing direction. + DIN 8584-2:2003-09 - - - Crystal - From Ancient Greek κρύσταλλος (krústallos, “clear ice”), from κρύος (krúos, “frost”). + + + A path is a string of characters used to uniquely identify a location in a directory structure according to a particular convention. + https://en.wikipedia.org/wiki/Path_(computing)#Universal_Naming_Convention - + - Machining with a circular cutting movement, usually associated with a multi-toothed tool, and with a feed movement perpendicular or oblique to the axis of rotation of the tool, to produce any workpiece surface. - DIN 8589-3:2003-09 + Type of scratching behaviour where the scratching force and the (displacement) deflection of the scratching tip are constant over the scratching distance during the test. + DIN EN ISO 472/A1:2019-03 + + + + + + The EMMO conceptualises the world using the primitive concepts of causality and parthood. Parthood is about the composition of world entities starting from other more fundamental entities. Causality is about the interactions between world entities. +The quantum is the smallest indivisible part of any world entity. Quantum individuals are the fundamental causal constituents of the universe, since it is implied that causality originates from quantum-to-quantum interactions. Quantums are no-dimensional, and their aggregation makes spacetime emerge from their causal structure. Causality between macro entities (i.e. entities made of more than one quantum) is explained as the sum of the causality relations between their quantum constituents. +The fundamental distinction between world entities is direct causality self-connectedness: a world entity can be self-connected xor not self-connected depending on the causality network of its fundamental components. +Void regions do not exist in the EMMO, or in other words there is no spacetime without entities, since space and time are measured quantities following a causality relation between entities (spacetime emerges as relational property not as a self-standing entity). +Entities are not placed in space or time: space and time are always relative between entities and are measured. In other words, space and time relations originates from causality interactions. + While EMMO mereocausality conceptualisation can be used on any possibile domain, so that a quantum can be a Lego brick or an furniture component, it can be better understood when a quantum is elucidated as the smallest measured time interval of existence of an elementary particle (e.g. quark, photon). @@ -27430,18 +27239,31 @@ liquid-phase sintering: sintering of a powder or compact containing at least two - + + + process of joining materials to make parts from 3D model data, usually layer upon layer, as opposed to subtractive manufacturing (3.1.29) and formative manufacturing methodologies, + ISO 23704-1:2022(en), 3.1.2 + + + + - fabrication of objects through the deposition of a material using a print head, nozzle or another printer technology -Note 1 to entry: This term is often used in a non-technical context synonymously with additive manufacturing (3.1.2) and, in these cases, typically associated with machines used for non-industrial purposes including personal use. - ISO/ASTM 52900:2021(en), 3.3.1 + historically for the analysis of metal ions, mercury ions were added to the test solution to form a mercury amalgam when reduced. Alternatively, an HMDE or MFE was used and the oxidizing agent added after amalgam formation. However, the toxicity of mercury and its compounds have all but precluded the present-day use of mercury + J. M. Pingarrón et al., Terminology of electrochemical methods of analysis (IUPAC Recommendations 2019), Pure and Applied Chemistry, 4, 92, 2020, 641-694. https://doi.org/10.1515/pac-2018-0109 - - - Manufacturing by changing the properties of the material of which a workpiece is made, which is done, among other things, by changes in the submicroscopic or atomic range, e.g. by diffusion of atoms, generation and movement of dislocations in the atomic lattice or chemical reactions, and where unavoidable changes in shape are not part of the essence of these processes. - DIN 8580:2022-12 + + + Collection + From Latin collectio, from colligere ‘gather together’. + + + + + + Data + From Latin data, nominative plural of datum (“that is given”), neuter past participle of dō (“I give”). @@ -27473,53 +27295,102 @@ Note 1 to entry: This term is often used in a non-technical context synonymously - - - ISO 55000:2014 -organization: person or group of people that has its own functions with responsibilities, authorities and relationships to achieve its objectives - https://www.iso.org/obp/ui/#iso:std:iso:55000:ed-1:v2:en:term:3.1.13 + + + Cutting workpieces between two cutting edges that move past each other (see Figure 1 [see figure in the standard]). + DIN 8588:2013-08 - - - CEN Workshop Agreement – CWA 17284 “Materials modelling – terminology, classification and metadata” - https://emmc.info/wp-content/uploads/2018/05/CWA_17284.pdf + + + Screwing (screwing on, screwing in, screwing tight) is joining by pressing on by means of a self-locking thread (from: DIN 8593 Part 3/09.85). + DIN 65099-5:1989-11 - + - AnalogicalIcon - From Ancient Greek ἀναλογία (analogía), from ἀνά (aná) + λόγος (lógos, “speech, reckoning”). + isCauseOf + From Latin causa (“reason, sake, cause”). - - - Simulacrum - From Latin simulacrum ("likeness, semblance") + + + the accumulation is similar to that used in stripping voltammetry + J. M. Pingarrón et al., Terminology of electrochemical methods of analysis (IUPAC Recommendations 2019), Pure and Applied Chemistry, 4, 92, 2020, 641-694. https://doi.org/10.1515/pac-2018-0109 - + + + Assemblying + From Old French asembler, based on Latin ad- ‘to’ + simul ‘together’. + + + + + + isPredecessorOf + From Latin prae ("beforehand") and decedere ("depart"). + + + + - The raw material or partially finished piece that is shaped by performing various operations. - https://en.wiktionary.org/wiki/workpiece + application of scientific knowledge, tools, techniques, crafts or systems in order to solve a problem or to achieve an objective which can result in a product or process + ISO 14034:2016-11 - - - A tessellation (or tiling) is the covering of a surface, often a plane, using one or more geometric shapes, called tiles, with no overlaps and no gaps. - https://en.wikipedia.org/wiki/Tessellation + + + Fundamental + From Latin fundamentum (“foundation”), from fundō (“to lay the foundation (of something), to found”), from fundus (“bottom”). + + + + + + Process consisting of two steps: - first, the steel is heated in a quenching treatment to a temperature above Ac3 and then rapidly cooled in a liquid to produce a process-specific grain structure; - subsequently, the steel is heated to a specific temperature during tempering to set the desired property and cooled in air. + DIN EN 10210-3:2020-11 + + + + + + Computation + From Latin con- +‎ putō (“I reckon”). + + The disjoint union of the Item and Collection classes. + The union implies that world entities can only be items or collections (standing for a collection of causally disconnected items). +Disjointness means that a collection cannot be an item and viceversa, representing the fact that a world entity cannot be causally self-connected and non-self connected at the same time. + + + + + + Forming of a solid body, whereby the plastic state is essentially brought about by a bending stress. + DIN 8586:2003-09 + + + + + + Forming of vessel parts from a flat mould into a three-dimensional shape by means of a press and tools, whereby material is neither removed nor added + DIN EN 13831:2007-12 + + + + - EMMO - EMMO is the acronym of Elementary Multiperspective Material Ontology. + Tool + Old English tōl, from a Germanic base meaning ‘prepare’. @@ -27530,24 +27401,25 @@ organization: person or group of people that has its own functions with responsi - - - Screwing (screwing on, screwing in, screwing tight) is joining by pressing on by means of a self-locking thread (from: DIN 8593 Part 3/09.85). - DIN 65099-5:1989-11 + + + Crystal + From Ancient Greek κρύσταλλος (krústallos, “clear ice”), from κρύος (krúos, “frost”). - - - Draw forming by drawing a workpiece through a tool opening that is narrowed in the drawing direction. - DIN 8584-2:2003-09 + + + ISO 3252:2019 Powder metallurgy +loose-powder sintering, gravity sintering: sintering of uncompacted powder + https://www.iso.org/obp/ui/#iso:std:iso:3252:ed-5:v1:en:term:3.3.33 - - - isPredecessorOf - From Latin prae ("beforehand") and decedere ("depart"). + + + machining with a circular cutting movement in which the axis of rotation of the tool and the axis of the internal surface to be produced are identical and the feed movement is in the direction of this axis. The axis of rotation of the cutting movement maintains its position relative to the workpiece independently of the feed movement (axis of rotation workpiece-bound). + DIN 8589-2:2003-09 @@ -27558,24 +27430,82 @@ organization: person or group of people that has its own functions with responsi - - - Fundamental - From Latin fundamentum (“foundation”), from fundō (“to lay the foundation (of something), to found”), from fundus (“bottom”). + + + Heat treatment process that generally produces martensite in the matrix. + ISO/TR 10809-1:2009, 0000_19 - + + + ISO 15531-1:2004 +discrete manufacturing: production of discrete items. + https://www.iso.org/obp/ui/#iso:std:iso:15531:-1:ed-1:v1:en:term:3.6.9 + + + + - Forming of a solid body, whereby the plastic state is essentially brought about by shear stress. - DIN 8587:2003-09 + Removal of material by means of rigid or flexible discs or belts containing abrasives. + DIN EN 12258-1:2012-08 - + + + chronopotentiometry where the applied current is changed linearly + J. M. Pingarrón et al., Terminology of electrochemical methods of analysis (IUPAC Recommendations 2019), Pure and Applied Chemistry, 4, 92, 2020, 641-694. https://doi.org/10.1515/pac-2018-0109. + + + + + + Source code (also referred to as source or code) is the version of software as it is originally written (i.e., typed into a computer) by a human in plain text (i.e., human readable alphanumeric characters). + http://www.linfo.org/source_code.html + + + + + + The permanent joining or other bringing together of two or more workpieces of a geometric shape or of similar workpieces with shapeless material. In each case, the cohesion is created locally and increased as a whole. + DIN 8593-0:2003-09 + + + + + + Variable + Fom Latin variabilis ("changeable"). + + + + - CausalChain - From Old French chaine, chaene (“chain”), from Latin catēna (“chain”). + Dedomena + From Greek, nominative plural form of δεδομένο (dedoméno) (data, information) + + + + + + ISO 55000:2014 +organization: person or group of people that has its own functions with responsibilities, authorities and relationships to achieve its objectives + https://www.iso.org/obp/ui/#iso:std:iso:55000:ed-1:v2:en:term:3.1.13 + + + + + + Perspective + From medieval Latin perspectiva ‘(science of) optics’, from perspect- ‘looked at closely’, from the verb perspicere, from per- ‘through’ + specere ‘to look’. + + + + + + All or part of the programs, procedures, rules, and associated documentation of an information processing system. + https://www.iso.org/obp/ui/fr/#iso:std:iso-iec:2382:-1:ed-3:en diff --git a/chameo-inferred.ttl b/chameo-inferred.ttl index 23b46ca..a7fd95f 100644 --- a/chameo-inferred.ttl +++ b/chameo-inferred.ttl @@ -649,7 +649,7 @@ ns1:EMMO_17e27c22_37e1_468c_9dd7_95e137f73e7f rdf:type owl:ObjectProperty ; ns1:EMMO_2337e25c_3c60_43fc_a8f9_b11a3f974291 rdf:type owl:ObjectProperty ; rdfs:subPropertyOf ns1:EMMO_ec2472ae_cf4a_46a5_8555_1556f5a6c3c5 ; rdfs:comment "The generic EMMO semiotical relation."@en ; - rdfs:isDefinedBy ; + rdfs:isDefinedBy ; rdfs:label "semiotical"@en ; skos:prefLabel "semiotical"@en ; ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "The generic EMMO semiotical relation."@en . @@ -1051,7 +1051,7 @@ ns1:EMMO_60577dea_9019_4537_ac41_80b0fb563d41 rdf:type owl:ObjectProperty ; rdfs:domain ns1:EMMO_6f5af708_f825_4feb_a0d1_a8d813d3022b ; rdfs:range ns1:EMMO_b21a56ed_f969_4612_a6ec_cb7766f7f31d ; rdfs:comment "A relation that connects the semiotic object to the sign in a semiotic process."@en ; - rdfs:isDefinedBy ; + rdfs:isDefinedBy ; rdfs:label "hasSign"@en ; skos:prefLabel "hasSign"@en ; ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "A relation that connects the semiotic object to the sign in a semiotic process."@en . @@ -1896,7 +1896,7 @@ ns1:EMMO_eb3518bf_f799_4f9e_8c3e_ce59af11453b rdf:type owl:ObjectProperty ; rdfs:domain ns1:EMMO_c9805ac9_a943_4be4_ac4b_6da64ba36c73 ; rdfs:range ns1:EMMO_35d2e130_6e01_41ed_94f7_00b333d46cf9 ; rdfs:comment "A semiotic relation that connects a declared semiotic object to a conventional sign in a declaration process."@en ; - rdfs:isDefinedBy ; + rdfs:isDefinedBy ; rdfs:label "hasConvention"@en ; skos:prefLabel "hasConvention"@en ; ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "A semiotic relation that connects a declared semiotic object to a conventional sign in a declaration process."@en . @@ -3288,7 +3288,7 @@ ns1:EMMO_057e7d57_aff0_49de_911a_8861d85cef40 rdf:type owl:Class ; rdfs:comment "A discrete data whose elements can be decoded as tokens from one or more alphabets, without necessarily respecting syntactic rules."@en , """A symbolic entity is not necessarily graphical (e.g. it doesn't necessarily have the physical shape of a letter), but its elements can be decoded and put in relation with an alphabet. In other words, a sequence of bit \"1000010\" in a RAM (a non-graphical entity) is a valid symbol since it can be decoded through ASCII rules as the letter \"B\". The same holds for an entity standing for the sound of a voice saying: \"Hello\", since it can be decomposed in discrete parts, each of them being associated to a letter of an alphabet."""@en ; - rdfs:isDefinedBy ; + rdfs:isDefinedBy ; rdfs:label "Symbolic"@en ; skos:prefLabel "Symbolic"@en ; ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "A discrete data whose elements can be decoded as tokens from one or more alphabets, without necessarily respecting syntactic rules."@en ; @@ -3405,7 +3405,7 @@ ns1:EMMO_06658d8d_dcde_4fc9_aae1_17f71c0bcdec rdf:type owl:Class ; owl:someValuesFrom ns1:EMMO_21f56795_ee72_4858_b571_11cfaa59c1a8 ] ; rdfs:comment "1-dimensional array who's spatial direct parts are numbers."@en ; - rdfs:isDefinedBy ; + rdfs:isDefinedBy ; rdfs:label "Vector"@en ; skos:altLabel "1DArray"@en , "LinearArray" ; @@ -5702,7 +5702,7 @@ ns1:EMMO_21205421_5783_4d3e_81e5_10c5d894a88a rdf:type owl:Class ; rdfs:comment "Any constitutionally or isotopically distinct atom, molecule, ion, ion pair, radical, radical ion, complex, conformer etc., identifiable as a separately distinguishable entity that can undergo a chemical reaction."@en , """Molecular entity is used as a general term for singular entities, irrespective of their nature, while chemical species stands for sets or ensembles of molecular entities. Note that the name of a compound may refer to the respective molecular entity or to the chemical species,"""@en ; - rdfs:isDefinedBy , + rdfs:isDefinedBy , "https://goldbook.iupac.org/terms/view/M03986"@en ; rdfs:label "MolecularEntity"@en ; skos:altLabel "ChemicalEntity"@en ; @@ -5841,7 +5841,7 @@ In the EMMO abstract entities do not exists, and numbers are simply defined by o Or alternatively, an integer numeral may also stands for a set of a specific cardinality (e.g. 3 stands for a set of three apples). Rational and real numbers are simply a syntactic arrangment of integers (digits, in decimal system). The fact that you can't give a name to a number without using a numeral or, in case of positive integers, without referring to a real world objects set with specific cardinality, suggests that the abstract concept of number is not a concept that can be practically used. For these reasons, the EMMO will consider numerals and numbers as the same concept."""@en ; - rdfs:isDefinedBy ; + rdfs:isDefinedBy ; rdfs:label "Number"@en ; skos:altLabel "Numeral"@en ; skos:prefLabel "Number"@en ; @@ -6394,7 +6394,7 @@ ns1:EMMO_28fbea28_2204_4613_87ff_6d877b855fcd rdf:type owl:Class ; See Shape4x3Matrix as an example."""@en , "Arrays are ordered mathematical objects who's elementary spatial parts are numbers. Their dimensionality is constructed with spatial direct parthood, where 1-dimensional arrays have spatial direct parts Number and n-dimensional array have spatial direct parts (n-1)-dimensional arrays."@en , "Arrays are ordered objects, since they are a subclasses of Arrangement."@en ; - rdfs:isDefinedBy ; + rdfs:isDefinedBy ; rdfs:label "Array"@en ; skos:prefLabel "Array"@en ; ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "Arrays are ordered mathematical objects who's elementary spatial parts are numbers. Their dimensionality is constructed with spatial direct parthood, where 1-dimensional arrays have spatial direct parts Number and n-dimensional array have spatial direct parts (n-1)-dimensional arrays."@en ; @@ -7654,7 +7654,7 @@ ns1:EMMO_38b579de_4331_40e0_803d_09efa298e726 rdf:type owl:Class ; """It is natural to define entities made or more than one smaller parts according to some unity criteria. One of the most general one applicable to causal systems is to ask that all the quantum parts of the system are bonded to the rest. In other words, causal convexity excludes all quantums that leave the system (no more interacting), or that are not yet part of it (not yet interacting). So, a photon leaving a body is not part of the body as convex system, while a photon the is carrier of electromagnetic interaction between two molecular parts of the body, is part of the convex body."""@en ; - rdfs:isDefinedBy ; + rdfs:isDefinedBy ; rdfs:label "PhysicalObject"@en ; skos:prefLabel "PhysicalObject"@en ; ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "A CausalSystem whose quantum parts are all bonded to the rest of the system."@en ; @@ -8587,7 +8587,7 @@ ns1:EMMO_4207e895_8b83_4318_996a_72cfb32acd94 rdf:type owl:Class ; ns1:EMMO_bc37743c_37c4_4ec7_9d58_d1aae5567352 ; rdfs:comment "A instance of a material (e.g. nitrogen) can represent different states of matter. The fact that the individual also belongs to other classes (e.g. Gas) would reveal the actual form in which the material is found."@en , "The class of individuals standing for an amount of ordinary matter substance (or mixture of substances) in different states of matter or phases."@en ; - rdfs:isDefinedBy ; + rdfs:isDefinedBy ; rdfs:label "Material"@en ; skos:prefLabel "Material"@en ; ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "The class of individuals standing for an amount of ordinary matter substance (or mixture of substances) in different states of matter or phases."@en ; @@ -8779,7 +8779,7 @@ ns1:EMMO_43e9a05d_98af_41b4_92f6_00f79a09bfce rdf:type owl:Class ; """Following the common definition of process, the reader may think that every whole should be a process, since every 4D object always has a time dimension. However, in the EMMO we restrict the meaning of the word process to items whose evolution in time have a particular meaning for the ontologist (i.e. every 4D object unfolds in time, but not every 4D time unfolding may be of interest for the ontologist and categorized as a process). For this reason, the definition of every specific process subclass requires the introduction of a primitive concept."""@en ; - rdfs:isDefinedBy ; + rdfs:isDefinedBy ; rdfs:label "Process"@en ; skos:altLabel "Occurrent"@en , "Perdurant"@en ; @@ -9069,7 +9069,7 @@ ns1:EMMO_472a0ca2_58bf_4618_b561_6fe68bd9fd49 rdf:type owl:Class ; rdfs:comment "A procedure can be considered as an intentional process with a plan."@en , "The process in which an agent works with some entities according to some existing formalised operative rules."@en , "The set of established forms or methods of an organized body for accomplishing a certain task or tasks (Wiktionary)."@en ; - rdfs:isDefinedBy ; + rdfs:isDefinedBy ; rdfs:label "Procedure"@en ; skos:altLabel "Elaboration"@en , "Work"@en ; @@ -9320,7 +9320,7 @@ ns1:EMMO_49267eba_5548_4163_8f36_518d65b583f9 rdf:type owl:Class ; rdfs:comment "The class of causal objects that stand for world objects according to a specific representational perspective."@en , """This class is the practical implementation of the EMMO pluralistic approach for which the only objective categorization is provided by the Universe individual and all the Quantum individuals. Between these two extremes, there are several subjective ways to categorize real world objects, each one provide under a 'Perspective' subclass."""@en ; - rdfs:isDefinedBy ; + rdfs:isDefinedBy ; rdfs:label "Perspective"@en ; skos:prefLabel "Perspective"@en ; ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "The class of causal objects that stand for world objects according to a specific representational perspective."@en ; @@ -9400,7 +9400,7 @@ ns1:EMMO_498aad49_f8d4_40a4_a9eb_efd563a0115f rdf:type owl:Class ; ns1:EMMO_4a1c73f1_b6f5_4d10_a3a6_5de90bac7cd0 rdf:type owl:Class ; rdfs:subClassOf ns1:EMMO_1b52ee70_121e_4d8d_8419_3f97cd0bd89c ; rdfs:comment "A characteriser that declares a property for an object without actually interact with it with the specific interaction required by the property definition (i.e. infer a property from other properties)."@en ; - rdfs:isDefinedBy ; + rdfs:isDefinedBy ; rdfs:label "Estimator"@en ; skos:prefLabel "Estimator"@en ; ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "A characteriser that declares a property for an object without actually interact with it with the specific interaction required by the property definition (i.e. infer a property from other properties)."@en . @@ -9590,7 +9590,7 @@ ns1:EMMO_4cdec724_8ed2_4e8e_b145_260a828bb1ed rdf:type owl:Class ; ns1:EMMO_4ce76d7f_03f8_45b6_9003_90052a79bfaa rdf:type owl:Class ; rdfs:subClassOf ns1:EMMO_54ee6b5e_5261_44a8_86eb_5717e7fdb9d0 ; rdfs:comment "A 'Mathematical' that has no unknown value, i.e. all its 'Variable\"-s parts refers to a 'Number' (for scalars that have a built-in datatype) or to another 'Numerical' (for complex numerical data structures that should rely on external implementations)."@en ; - rdfs:isDefinedBy ; + rdfs:isDefinedBy ; rdfs:label "Numerical"@en ; skos:prefLabel "Numerical"@en ; ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "A 'Mathematical' that has no unknown value, i.e. all its 'Variable\"-s parts refers to a 'Number' (for scalars that have a built-in datatype) or to another 'Numerical' (for complex numerical data structures that should rely on external implementations)."@en . @@ -10690,7 +10690,7 @@ Following the two examples, a marathon individual is a maximal that can be decom ns1:EMMO_57d977ab_0036_4779_b59a_e47620afdb9c rdf:type owl:Class ; rdfs:subClassOf ns1:EMMO_38b579de_4331_40e0_803d_09efa298e726 ; rdfs:comment "The class of physical objects possessing a structure that is larger than a single composite particle, for which its bosonic or fermionic nature is undetermined." ; - rdfs:isDefinedBy ; + rdfs:isDefinedBy ; rdfs:label "CompositePhysicalObject"@en ; skos:prefLabel "CompositePhysicalObject"@en ; ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "The class of physical objects possessing a structure that is larger than a single composite particle, for which its bosonic or fermionic nature is undetermined." . @@ -10992,7 +10992,7 @@ ns1:EMMO_5b2222df_4da6_442f_8244_96e9e45887d1 rdf:type owl:Class ; It is possible to identify more than one concept that can be reasonably labelled with the term \"matter\". For example, it is possible to label as matter only the entities that are made up of atoms. Or more generally, we can be more fine-grained and call \"matter\" the entities that are made up of protons, neutrons or electrons, so that we can call matter also a neutron radiation or a cathode ray. A more fundamental approach, that we embrace for the EMMO, considers matter as entities that are made of fermions (i.e. quarks and leptons). This would exclude particles like the W and Z bosons that possess some mass, but are not fermions. Antimatter is a subclass of matter."""@en ; - rdfs:isDefinedBy ; + rdfs:isDefinedBy ; rdfs:label "Matter"@en ; skos:altLabel "PhysicalSubstance"@en ; skos:prefLabel "Matter"@en ; @@ -12386,7 +12386,7 @@ ns1:EMMO_6e9cb807_fc68_4bcf_b3ba_5fccc887c644 rdf:type owl:Class ; rdfs:subClassOf ns1:EMMO_5b2222df_4da6_442f_8244_96e9e45887d1 ; owl:disjointWith ns1:EMMO_f13672a3_59cc_40ed_8def_65009a8f74e6 ; rdfs:comment "Matter composed of only matter particles, excluding anti-matter particles."@en ; - rdfs:isDefinedBy ; + rdfs:isDefinedBy ; rdfs:label "OrdinaryMatter"@en ; skos:prefLabel "OrdinaryMatter"@en ; ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "Matter composed of only matter particles, excluding anti-matter particles."@en . @@ -14528,7 +14528,7 @@ ns1:EMMO_89a0c87c_0804_4013_937a_6fe234d9499c rdf:type owl:Class ; ] ; rdfs:comment "A symbolic entity made of other symbolic entities according to a specific spatial configuration."@en , "This class collects individuals that represents arrangements of strings, or other symbolic compositions, without any particular predifined arrangement schema."@en ; - rdfs:isDefinedBy ; + rdfs:isDefinedBy ; rdfs:label "SymbolicConstruct"@en ; skos:prefLabel "SymbolicConstruct"@en ; ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "A symbolic entity made of other symbolic entities according to a specific spatial configuration."@en ; @@ -14633,7 +14633,7 @@ ns1:EMMO_8b1367d6_0133_4b56_acc1_fa8b058169e3 rdf:type owl:Class ; ns1:EMMO_29108c7c_9087_4992_ab1c_02561665df21 ) ; rdfs:comment "A composite particle is a bound state of elementary particles for which it is still possible to define its bosonic or fermionic behaviour."@en ; - rdfs:isDefinedBy ; + rdfs:isDefinedBy ; rdfs:label "CompositePhysicalParticle"@en ; skos:prefLabel "CompositePhysicalParticle"@en ; ns1:EMMO_31252f35_c767_4b97_a877_1235076c3e13 "A composite particle is a bound state of elementary particles for which it is still possible to define its bosonic or fermionic behaviour."@en . @@ -16096,7 +16096,7 @@ ns1:EMMO_9bc6da11_528a_44e8_bd9e_c4154eae7e55 rdf:type owl:Class ; ns1:EMMO_9be5fcc4_0d8b_481d_b984_6338d4b55588 rdf:type owl:Class ; rdfs:subClassOf ns1:EMMO_ea67caa5_2609_4e91_98ae_81103f2d5c25 ; rdfs:comment "An observer that makes use of a measurement tool and provides a quantitative property."@en ; - rdfs:isDefinedBy ; + rdfs:isDefinedBy ; rdfs:label "Measurer"@en ; skos:prefLabel "Measurer"@en ; ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "An observer that makes use of a measurement tool and provides a quantitative property."@en . @@ -18283,7 +18283,7 @@ ns1:EMMO_bafc17b5_9be4_4823_8bbe_ab4e90b6738c rdf:type owl:Class ; owl:someValuesFrom ns1:EMMO_c130614a_2985_476d_a7ed_8a137847703c ] ; rdfs:comment "A process occurring with the active participation of an agent that drives the process according to a specific objective (intention)."@en ; - rdfs:isDefinedBy ; + rdfs:isDefinedBy ; rdfs:label "IntentionalProcess"@en ; skos:altLabel "Project"@en ; skos:prefLabel "IntentionalProcess"@en ; @@ -18357,7 +18357,7 @@ ns1:EMMO_bc37743c_37c4_4ec7_9d58_d1aae5567352 rdf:type owl:Class ; ns1:EMMO_8b0923ab_b500_477b_9ce9_8b3a3e4dc4f2 ) ; rdfs:comment "A composite physical object made of fermions (i.e. having mass and occupying space)." ; - rdfs:isDefinedBy ; + rdfs:isDefinedBy ; rdfs:label "Substance"@en ; skos:prefLabel "Substance"@en ; ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "A composite physical object made of fermions (i.e. having mass and occupying space)." . @@ -18515,7 +18515,7 @@ ns1:EMMO_be8592a7_68d1_4a06_ad23_82f2b56ef926 rdf:type owl:Class ; rdfs:comment """A discrete schema may be based on a continuum material basis that is filtered according to its variations. For example, a continuous voltage based signal can be considered 1 or 0 according to some threshold. Discrete does not mean tha the material basis is discrete, but that the data are encoded according to such step-based rules."""@en , "Data whose variations are decoded according to a discrete schema."@en ; - rdfs:isDefinedBy ; + rdfs:isDefinedBy ; rdfs:label "DiscreteData"@en ; skos:prefLabel "DiscreteData"@en ; ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "Data whose variations are decoded according to a discrete schema."@en ; @@ -19014,7 +19014,7 @@ The unity criterion beyond the definition of a causal structure (the most genera - is made of at least two quantums (a structure is not a simple entity) - all quantum parts form a causally connected graph"""@en , "The union of CausalPath and CausalSystem classes."@en ; - rdfs:isDefinedBy ; + rdfs:isDefinedBy ; rdfs:label "CausalStructure"@en ; skos:altLabel "CausalObject"@en ; skos:prefLabel "CausalStructure"@en ; @@ -20489,7 +20489,7 @@ Then I have two different physical quantities that are properties thanks to two ns1:EMMO_d8d2144e_5c8d_455d_a643_5caf4d8d9df8 rdf:type owl:Class ; rdfs:subClassOf ns1:EMMO_057e7d57_aff0_49de_911a_8861d85cef40 ; rdfs:comment "A language object is a discrete data entity respecting a specific language syntactic rules (a well-formed formula)."@en ; - rdfs:isDefinedBy ; + rdfs:isDefinedBy ; rdfs:label "Language"@en ; skos:prefLabel "Language"@en ; ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "A language object is a discrete data entity respecting a specific language syntactic rules (a well-formed formula)."@en . @@ -21977,7 +21977,7 @@ ns1:EMMO_ea47add2_8e93_4659_a5f0_e6879032dee0 rdf:type owl:Class ; ns1:EMMO_ea67caa5_2609_4e91_98ae_81103f2d5c25 rdf:type owl:Class ; rdfs:subClassOf ns1:EMMO_1b52ee70_121e_4d8d_8419_3f97cd0bd89c ; rdfs:comment "A characteriser that declares a property for an object through the specific interaction required by the property definition."@en ; - rdfs:isDefinedBy ; + rdfs:isDefinedBy ; rdfs:label "Observer"@en ; skos:prefLabel "Observer"@en ; ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "A characteriser that declares a property for an object through the specific interaction required by the property definition."@en . @@ -22101,7 +22101,7 @@ In this material branch, H atom is a particular case, with respect to higher ato We cannot say that H₂ molecule has direct part two H atoms, but has direct part two H nucleus."""@en , "An 'atom' is a 'nucleus' surrounded by an 'electron_cloud', i.e. a quantum system made of one or more bounded electrons."@en ; - rdfs:isDefinedBy ; + rdfs:isDefinedBy ; rdfs:label "Atom"@en ; skos:altLabel "ChemicalElement"@en ; skos:prefLabel "Atom"@en ; @@ -23173,7 +23173,7 @@ ns1:EMMO_f8bd64d5_5d3e_4ad4_a46e_c30714fecb7f rdf:type owl:Class ; owl:onDataRange xsd:integer ] ; rdfs:comment "An integer number."@en ; - rdfs:isDefinedBy ; + rdfs:isDefinedBy ; rdfs:label "Integer"@en ; skos:prefLabel "Integer"@en ; ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "An integer number."@en . @@ -23944,12 +23944,8 @@ ns1:emmo_fd2aa864_eef7_4c3d_8243_9ea832d9df3e rdf:type owl:Class ; ### https://w3id.org/emmo/domain/characterisation-methodology/chameo#Amperometry :Amperometry rdf:type owl:Class ; rdfs:subClassOf :ElectrochemicalTesting ; - rdfs:comment "Amperometry can be distinguished from voltammetry by the parameter being controlled (electrode potential E) and the parameter being measured (electrode current I which is usually a function of time – see chronoamperometry)."@en , - "In a non-stirred solution, a diffusion-limited current is usually measured, which is propor-tional to the concentration of an electroactive analyte."@en , - "The amperometric method provides the ability to distinguish selectively between a number of electroactive species in solution by judicious selection of the applied potential and/or choice of electrode material."@en , - "The current is usually faradaic and the applied potential is usually constant."@en , - "The integral of current with time is the electric charge, which may be related to the amount of substance reacted by Faraday’s laws of electrolysis."@en , - "" ; + rdfs:comment "Amperometry can be distinguished from voltammetry by the parameter being controlled (electrode potential E) and the parameter being measured (electrode current I which is usually a function of time – see chronoamperometry). In a non-stirred solution, a diffusion-limited current is usually measured, which is propor-tional to the concentration of an electroactive analyte. The current is usually faradaic and the applied potential is usually constant. The integral of current with time is the electric charge, which may be related to the amount of substance reacted by Faraday’s laws of electrolysis."@en , + "The amperometric method provides the ability to distinguish selectively between a number of electroactive species in solution by judicious selection of the applied potential and/or choice of electrode material."@en ; rdfs:isDefinedBy : ; rdfs:label "Amperometry"@en ; skos:prefLabel "Amperometry"@en ; @@ -23960,8 +23956,7 @@ ns1:emmo_fd2aa864_eef7_4c3d_8243_9ea832d9df3e rdf:type owl:Class ; ### https://w3id.org/emmo/domain/characterisation-methodology/chameo#AnalyticalElectronMicroscopy :AnalyticalElectronMicroscopy rdf:type owl:Class ; rdfs:subClassOf :Microscopy ; - rdfs:comment "Analytical electron microscopy (AEM) refers to the collection of spectroscopic data in TEM or STEM, enabling qualitative or quantitative compositional analysis."@en , - "" ; + rdfs:comment "Analytical electron microscopy (AEM) refers to the collection of spectroscopic data in TEM or STEM, enabling qualitative or quantitative compositional analysis."@en ; rdfs:isDefinedBy : ; rdfs:label "AnalyticalElectronMicroscopy"@en ; skos:prefLabel "AnalyticalElectronMicroscopy"@en ; @@ -23971,15 +23966,12 @@ ns1:emmo_fd2aa864_eef7_4c3d_8243_9ea832d9df3e rdf:type owl:Class ; ### https://w3id.org/emmo/domain/characterisation-methodology/chameo#AnodicStrippingVoltammetry :AnodicStrippingVoltammetry rdf:type owl:Class ; rdfs:subClassOf :StrippingVoltammetry ; - rdfs:comment "A peak-shaped anodic stripping voltammogram is obtained. Peak current depends on time of accumulation, mass transport of analyte (stirring), scan rate and mode (linear or pulse), and analyte concentration in solution."@en , - "A solid electrode, carbon paste or composite electrode, bismuth film electrode, mercury film electrode, or static mercury drop electrode may be used."@en , - "Stripping voltammetry in which material accumulated at the working electrode is electrochemically oxi- dized in the stripping step."@en , - "" ; + rdfs:comment "Stripping voltammetry in which material accumulated at the working electrode is electrochemically oxi- dized in the stripping step. A peak-shaped anodic stripping voltammogram is obtained. Peak current depends on time of accumulation, mass transport of analyte (stirring), scan rate and mode (linear or pulse), and analyte concentration in solution. A solid electrode, carbon paste or composite electrode, bismuth film electrode, mercury film electrode, or static mercury drop electrode may be used."@en ; rdfs:isDefinedBy : ; rdfs:label "AnodicStrippingVoltammetry"@en ; skos:prefLabel "AnodicStrippingVoltammetry"@en ; ns1:EMMO_26bf1bef_d192_4da6_b0eb_d2209698fb54 "https://www.wikidata.org/wiki/Q939328" ; - ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "Stripping voltammetry in which material accumulated at the working electrode is electrochemically oxi- dized in the stripping step."@en ; + ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "Stripping voltammetry in which material accumulated at the working electrode is electrochemically oxi- dized in the stripping step. A peak-shaped anodic stripping voltammogram is obtained. Peak current depends on time of accumulation, mass transport of analyte (stirring), scan rate and mode (linear or pulse), and analyte concentration in solution. A solid electrode, carbon paste or composite electrode, bismuth film electrode, mercury film electrode, or static mercury drop electrode may be used."@en ; ns1:EMMO_fe015383_afb3_44a6_ae86_043628697aa2 "https://doi.org/10.1515/pac-2018-0109"@en . @@ -24247,8 +24239,7 @@ standards. devices NOTE 1 A measuring instrument that can be used alone for making measurements is a measuring system. NOTE 2 A measuring instrument is either an indicating measuring instrument or a material measure."""@en , - "The instrument used for characterising a material, which usually has a probe and a detector as parts."@en , - "" ; + "The instrument used for characterising a material, which usually has a probe and a detector as parts."@en ; rdfs:isDefinedBy : ; rdfs:label "CharacterisationMeasurementInstrument" ; skos:prefLabel "CharacterisationMeasurementInstrument" ; @@ -24301,8 +24292,7 @@ measurement procedure and the measuring system should then be chosen in order no system specifications. -- International Vocabulary of Metrology(VIM)"""@en , - "The measurement process associates raw data to the sample through a probe and a detector."@en , - "" ; + "The measurement process associates raw data to the sample through a probe and a detector."@en ; rdfs:isDefinedBy : ; rdfs:label "CharacterisationMeasurementProcess"@en ; skos:prefLabel "CharacterisationMeasurementProcess"@en ; @@ -24334,8 +24324,7 @@ system specifications. ] ; owl:someValuesFrom :CharacterisationMeasurementProcess ] ; - rdfs:comment "Used to break-down a CharacterisationMeasurementProcess into his specific tasks."@en , - "" ; + rdfs:comment "Used to break-down a CharacterisationMeasurementProcess into his specific tasks."@en ; rdfs:isDefinedBy : ; rdfs:label "CharacterisationMeasurementTask"@en ; skos:prefLabel "CharacterisationMeasurementTask"@en ; @@ -24346,8 +24335,7 @@ system specifications. :CharacterisationProcedure rdf:type owl:Class ; rdfs:subClassOf ns1:EMMO_472a0ca2_58bf_4618_b561_6fe68bd9fd49 ; rdfs:comment "Characterisation procedure may refer to the full characterisation process or just a part of the full process."@en , - "The process of performing characterisation by following some existing formalised operative rules."@en , - "" ; + "The process of performing characterisation by following some existing formalised operative rules."@en ; rdfs:isDefinedBy : ; rdfs:label "CharacterisationProcedure"@en ; skos:prefLabel "CharacterisationProcedure"@en ; @@ -24364,8 +24352,7 @@ Data sampling"""@en ; ### https://w3id.org/emmo/domain/characterisation-methodology/chameo#CharacterisationProcedureValidation :CharacterisationProcedureValidation rdf:type owl:Class ; rdfs:subClassOf ns1:EMMO_909415d1_7c43_4d5e_bbeb_7e1910159f66 ; - rdfs:comment "Describes why the characterization procedure was chosen and deemed to be the most useful for the sample."@en , - "" ; + rdfs:comment "Describes why the characterization procedure was chosen and deemed to be the most useful for the sample."@en ; rdfs:isDefinedBy : ; rdfs:label "CharacterisationProcedureValidation"@en ; skos:prefLabel "CharacterisationProcedureValidation"@en ; @@ -24376,8 +24363,7 @@ Data sampling"""@en ; :CharacterisationProperty rdf:type owl:Class ; rdfs:subClassOf ns1:EMMO_873b0ab3_88e6_4054_b901_5531e01f14a4 , :SecondaryData ; - rdfs:comment "The characterisation property is the investigate property or behaviour of a sample. It is derived from the secondary data, usually after classification or quantification (manually or by a model)."@en , - "" ; + rdfs:comment "The characterisation property is the investigate property or behaviour of a sample. It is derived from the secondary data, usually after classification or quantification (manually or by a model)."@en ; rdfs:isDefinedBy : ; rdfs:label "CharacterisationProperty"@en ; skos:prefLabel "CharacterisationProperty"@en ; @@ -24387,8 +24373,7 @@ Data sampling"""@en ; ### https://w3id.org/emmo/domain/characterisation-methodology/chameo#CharacterisationProtocol :CharacterisationProtocol rdf:type owl:Class ; rdfs:subClassOf :CharacterisationProcedure ; - rdfs:comment "A characterisation protocol is defined whenever it is desirable to standardize a laboratory method to ensure successful replication of results by others in the same laboratory or by other laboratories."@en , - "" ; + rdfs:comment "A characterisation protocol is defined whenever it is desirable to standardize a laboratory method to ensure successful replication of results by others in the same laboratory or by other laboratories."@en ; rdfs:isDefinedBy : ; rdfs:label "CharacterisationProtocol"@en ; skos:prefLabel "CharacterisationProtocol"@en ; @@ -24398,8 +24383,7 @@ Data sampling"""@en ; ### https://w3id.org/emmo/domain/characterisation-methodology/chameo#CharacterisationSoftware :CharacterisationSoftware rdf:type owl:Class ; rdfs:subClassOf ns1:EMMO_3b031fa9_8623_4ea5_8b57_bcafb70c5c8b ; - rdfs:comment "A software application to process characterisation data"@en , - "" ; + rdfs:comment "A software application to process characterisation data"@en ; rdfs:isDefinedBy : ; rdfs:label "CharacterisationSoftware" ; skos:prefLabel "CharacterisationSoftware" ; @@ -24426,8 +24410,7 @@ Measurement management systems – Requirements for measurement processes and me NOTE 3 Although the terms “measuring system” and “measurement system” are frequently used synonymously, the latter is instead sometimes used to refer to a measuring system plus all other entities involved in a measurement, including the object under measurement and the person(s) performing the measurement. -NOTE 4 A measuring system can be used as a measurement standard."""@en , - "" ; +NOTE 4 A measuring system can be used as a measurement standard."""@en ; rdfs:isDefinedBy : ; rdfs:label "CharacterisationSystem"@en ; skos:prefLabel "CharacterisationSystem"@en ; @@ -24470,7 +24453,6 @@ NOTE 4 A measuring system can be used as a measurement standard."""@en ; :CharacterisationTechnique rdf:type owl:Class ; rdfs:subClassOf ns1:EMMO_c7013b53_3071_410b_a5e4_a8d266dcdfb5 ; rdfs:comment "The description of the overall characterisation method. It can be composed of different steps (e.g. sample preparation, calibration, measurement, post-processing)."@en , - "" , "A characterisation method is not only related to the measurement process which can be one of its steps." ; rdfs:isDefinedBy : ; rdfs:label "CharacterisationTechnique"@en ; @@ -24494,8 +24476,7 @@ NOTE 4 A measuring system can be used as a measurement standard."""@en ; owl:onProperty ns1:EMMO_70da982d_1810_4b01_9630_a28e216ecd9a ; owl:someValuesFrom :CharacterisationTask ] ; - rdfs:comment "A characterisation procedure that has at least two characterisation tasks as proper parts."@en , - "" ; + rdfs:comment "A characterisation procedure that has at least two characterisation tasks as proper parts."@en ; rdfs:isDefinedBy : ; rdfs:label "CharacterisationWorkflow"@en ; skos:prefLabel "CharacterisationWorkflow"@en ; @@ -24505,8 +24486,7 @@ NOTE 4 A measuring system can be used as a measurement standard."""@en ; ### https://w3id.org/emmo/domain/characterisation-methodology/chameo#CharacterisedSample :CharacterisedSample rdf:type owl:Class ; rdfs:subClassOf :Sample ; - rdfs:comment "The sample after having been subjected to a characterization process"@en , - "" ; + rdfs:comment "The sample after having been subjected to a characterization process"@en ; rdfs:isDefinedBy : ; rdfs:label "CharacterisedSample" ; skos:prefLabel "CharacterisedSample" ; @@ -24525,8 +24505,7 @@ NOTE 4 A measuring system can be used as a measurement standard."""@en ; ### https://w3id.org/emmo/domain/characterisation-methodology/chameo#Chromatography :Chromatography rdf:type owl:Class ; rdfs:subClassOf :CharacterisationTechnique ; - rdfs:comment "In chemical analysis, chromatography is a laboratory technique for the separation of a mixture into its components."@en , - "" ; + rdfs:comment "In chemical analysis, chromatography is a laboratory technique for the separation of a mixture into its components."@en ; rdfs:isDefinedBy : ; rdfs:label "Chromatography"@en ; skos:prefLabel "Chromatography"@en ; @@ -24537,49 +24516,42 @@ NOTE 4 A measuring system can be used as a measurement standard."""@en ; ### https://w3id.org/emmo/domain/characterisation-methodology/chameo#Chronoamperometry :Chronoamperometry rdf:type owl:Class ; rdfs:subClassOf :Amperometry ; - rdfs:comment "If the potential step is from a potential at which no current flows (i.e., at which the oxidation or reduction of the electrochemically active species does not take place) to one at which the current is limited by diffusion (see diffusion-limited current), the current obeys the Cottrell equation."@en , - "amperometry in which the current is measured as a function of time after a change in the applied potential"@en , - "" ; + rdfs:comment "Amperometry in which the current is measured as a function of time after a change in the applied potential. If the potential step is from a potential at which no current flows (i.e., at which the oxidation or reduction of the electrochemically active species does not take place) to one at which the current is limited by diffusion (see diffusion-limited current), the current obeys the Cottrell equation."@en ; rdfs:isDefinedBy : ; rdfs:label "Chronoamperometry"@en ; skos:altLabel "AmperiometricDetection"@en , "AmperometricCurrentTimeCurve"@en ; skos:prefLabel "Chronoamperometry"@en ; - ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "amperometry in which the current is measured as a function of time after a change in the applied potential"@en ; + ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "Amperometry in which the current is measured as a function of time after a change in the applied potential. If the potential step is from a potential at which no current flows (i.e., at which the oxidation or reduction of the electrochemically active species does not take place) to one at which the current is limited by diffusion (see diffusion-limited current), the current obeys the Cottrell equation."@en ; ns1:EMMO_fe015383_afb3_44a6_ae86_043628697aa2 "https://doi.org/10.1515/pac-2018-0109"@en . ### https://w3id.org/emmo/domain/characterisation-methodology/chameo#Chronocoulometry :Chronocoulometry rdf:type owl:Class ; rdfs:subClassOf :Coulometry ; - rdfs:comment "Chronocoulometry provides the same information that is provided by chronoamperometry, since it is based on the integration of the I-t curve. Nevertheless, chronocoulometry offers important experimental advantages, such as (i) the measured signal usually increases with time and hence the later parts of the transient can be detected more accurately, (ii) a better signal-to-noise ratio can be achieved, and (iii) other contributions to overall charge passed as a function of time can be discriminated from those due to the diffusion of electroactive substances."@en , - "direct coulometry at controlled potential in which the electric charge passed after the application of a potential step perturbation is measured as a function of time (Q-t curve)"@en , - "" ; + rdfs:comment "Direct coulometry at controlled potential in which the electric charge passed after the application of a potential step perturbation is measured as a function of time (Q-t curve). Chronocoulometry provides the same information that is provided by chronoamperometry, since it is based on the integration of the I-t curve. Nevertheless, chronocoulometry offers important experimental advantages, such as (i) the measured signal usually increases with time and hence the later parts of the transient can be detected more accurately, (ii) a better signal-to-noise ratio can be achieved, and (iii) other contributions to overall charge passed as a function of time can be discriminated from those due to the diffusion of electroactive substances."@en ; rdfs:isDefinedBy : ; rdfs:label "Chronocoulometry"@en ; skos:prefLabel "Chronocoulometry"@en ; - ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "direct coulometry at controlled potential in which the electric charge passed after the application of a potential step perturbation is measured as a function of time (Q-t curve)"@en ; + ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "Direct coulometry at controlled potential in which the electric charge passed after the application of a potential step perturbation is measured as a function of time (Q-t curve). Chronocoulometry provides the same information that is provided by chronoamperometry, since it is based on the integration of the I-t curve. Nevertheless, chronocoulometry offers important experimental advantages, such as (i) the measured signal usually increases with time and hence the later parts of the transient can be detected more accurately, (ii) a better signal-to-noise ratio can be achieved, and (iii) other contributions to overall charge passed as a function of time can be discriminated from those due to the diffusion of electroactive substances."@en ; ns1:EMMO_fe015383_afb3_44a6_ae86_043628697aa2 "https://doi.org/10.1515/pac-2018-0109"@en . ### https://w3id.org/emmo/domain/characterisation-methodology/chameo#Chronopotentiometry :Chronopotentiometry rdf:type owl:Class ; rdfs:subClassOf :Potentiometry ; - rdfs:comment "The change in applied current is usually a step, but cyclic current reversals or linearly increasing currents are also used."@en , - "potentiometry in which the potential is measured with time following a change in applied current"@en , - "" ; + rdfs:comment "Potentiometry in which the potential is measured with time following a change in applied current. The change in applied current is usually a step, but cyclic current reversals or linearly increasing currents are also used."@en ; rdfs:isDefinedBy : ; rdfs:label "Chronopotentiometry"@en ; skos:prefLabel "Chronopotentiometry"@en ; - ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "potentiometry in which the potential is measured with time following a change in applied current"@en ; + ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "Potentiometry in which the potential is measured with time following a change in applied current. The change in applied current is usually a step, but cyclic current reversals or linearly increasing currents are also used."@en ; ns1:EMMO_fe015383_afb3_44a6_ae86_043628697aa2 "https://doi.org/10.1515/pac-2018-0109"@en . ### https://w3id.org/emmo/domain/characterisation-methodology/chameo#CompressionTesting :CompressionTesting rdf:type owl:Class ; rdfs:subClassOf :MechanicalTesting ; - rdfs:comment "Compression tests characterize material and product strength and stiffness under applied crushing loads. These tests are typically conducted by applying compressive pressure to a test specimen using platens or specialized fixtures with a testing machine that produces compressive loads."@en , - "" ; + rdfs:comment "Compression tests characterize material and product strength and stiffness under applied crushing loads. These tests are typically conducted by applying compressive pressure to a test specimen using platens or specialized fixtures with a testing machine that produces compressive loads."@en ; rdfs:isDefinedBy : ; rdfs:label "CompressionTesting"@en ; skos:prefLabel "CompressionTesting"@en ; @@ -24589,30 +24561,24 @@ NOTE 4 A measuring system can be used as a measurement standard."""@en ; ### https://w3id.org/emmo/domain/characterisation-methodology/chameo#ConductometricTitration :ConductometricTitration rdf:type owl:Class ; rdfs:subClassOf :Conductometry ; - rdfs:comment "The equivalence-point is obtained as the intersection of linear parts of the conductance G, versus titrant volume V, curve (see"@en , - "The method can be used for deeply coloured or turbid solutions. Acid-base and precipita- tion reactions are most frequently used."@en , - "The method is based on replacing an ionic species of the analyte with another species, cor- responding to the titrant or the product with significantly different conductance."@en , - "titration in which the electric conductivity of a solution is measured as a function of the amount of titrant added"@en , - "" ; + rdfs:comment "Titration in which the electric conductivity of a solution is measured as a function of the amount of titrant added. The equivalence-point is obtained as the intersection of linear parts of the conductance G, versus titrant volume V, curve. The method can be used for deeply coloured or turbid solutions. Acid-base and precipitation reactions are most frequently used. The method is based on replacing an ionic species of the analyte with another species, cor- responding to the titrant or the product with significantly different conductance."@en ; rdfs:isDefinedBy : ; rdfs:label "ConductometricTitration"@en ; skos:prefLabel "ConductometricTitration"@en ; ns1:EMMO_26bf1bef_d192_4da6_b0eb_d2209698fb54 "https://www.wikidata.org/wiki/Q11778221" ; - ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "titration in which the electric conductivity of a solution is measured as a function of the amount of titrant added"@en ; + ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "Titration in which the electric conductivity of a solution is measured as a function of the amount of titrant added. The equivalence-point is obtained as the intersection of linear parts of the conductance G, versus titrant volume V, curve. The method can be used for deeply coloured or turbid solutions. Acid-base and precipitation reactions are most frequently used. The method is based on replacing an ionic species of the analyte with another species, cor- responding to the titrant or the product with significantly different conductance."@en ; ns1:EMMO_fe015383_afb3_44a6_ae86_043628697aa2 "https://doi.org/10.1515/pac-2018-0109"@en . ### https://w3id.org/emmo/domain/characterisation-methodology/chameo#Conductometry :Conductometry rdf:type owl:Class ; rdfs:subClassOf :ElectrochemicalTesting ; - rdfs:comment "The conductivity of a solution depends on the concentration and nature of ions present."@en , - "measurement principle in which the electric conductivity of a solution is measured"@en , - "" ; + rdfs:comment "Measurement principle in which the electric conductivity of a solution is measured. The conductivity of a solution depends on the concentration and nature of ions present."@en ; rdfs:isDefinedBy : ; rdfs:label "Conductometry"@en ; skos:prefLabel "Conductometry"@en ; ns1:EMMO_26bf1bef_d192_4da6_b0eb_d2209698fb54 "https://www.wikidata.org/wiki/Q901180" ; - ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "measurement principle in which the electric conductivity of a solution is measured"@en ; + ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "Measurement principle in which the electric conductivity of a solution is measured. The conductivity of a solution depends on the concentration and nature of ions present."@en ; ns1:EMMO_b432d2d5_25f4_4165_99c5_5935a7763c1a "Monitoring of the purity of deionized water."@en ; ns1:EMMO_c84c6752_6d64_48cc_9500_e54a3c34898d "https://en.wikipedia.org/wiki/Conductometry"@en ; ns1:EMMO_fe015383_afb3_44a6_ae86_043628697aa2 "https://doi.org/10.1515/pac-2018-0109"@en . @@ -24621,8 +24587,7 @@ NOTE 4 A measuring system can be used as a measurement standard."""@en ; ### https://w3id.org/emmo/domain/characterisation-methodology/chameo#ConfocalMicroscopy :ConfocalMicroscopy rdf:type owl:Class ; rdfs:subClassOf :Microscopy ; - rdfs:comment "Confocal microscopy, most frequently confocal laser scanning microscopy (CLSM) or laser scanning confocal microscopy (LSCM), is an optical imaging technique for increasing optical resolution and contrast of a micrograph by means of using a spatial pinhole to block out-of-focus light in image formation."@en , - "" ; + rdfs:comment "Confocal microscopy, most frequently confocal laser scanning microscopy (CLSM) or laser scanning confocal microscopy (LSCM), is an optical imaging technique for increasing optical resolution and contrast of a micrograph by means of using a spatial pinhole to block out-of-focus light in image formation."@en ; rdfs:isDefinedBy : ; rdfs:label "ConfocalMicroscopy"@en ; skos:prefLabel "ConfocalMicroscopy"@en ; @@ -24632,29 +24597,23 @@ NOTE 4 A measuring system can be used as a measurement standard."""@en ; ### https://w3id.org/emmo/domain/characterisation-methodology/chameo#CoulometricTitration :CoulometricTitration rdf:type owl:Class ; rdfs:subClassOf :Coulometry ; - rdfs:comment "Coulometric titrations are usually carried out in convective mass transfer mode using a large surface working electrode. The reference and auxiliary electrodes are located in sepa- rate compartments. A basic requirement is a 100 % current efficiency of titrant generation at the working electrode. End-point detection can be accomplished with potentiometry, amperometry, biamperometry, bipotentiometry, photometry, or by using a visual indicator."@en , - "The main advantages are that titration is possible with less stable titrants, the standardi- zation of titrant is not necessary, the volume of the test solution is not changed, and the method is easily automated."@en , - "titration in which the titrant is generated electrochemically, either by constant current or at constant potential. The titrant reacts stoichiometrically with the analyte, the amount of which is calculated using Faraday’s laws of electrolysis from the electric charge required to reach the end-point"@en , - "" ; + rdfs:comment "Titration in which the titrant is generated electrochemically, either by constant current or at constant potential. The titrant reacts stoichiometrically with the analyte, the amount of which is calculated using Faraday’s laws of electrolysis from the electric charge required to reach the end-point. Coulometric titrations are usually carried out in convective mass transfer mode using a large surface working electrode. The reference and auxiliary electrodes are located in sepa- rate compartments. A basic requirement is a 100 % current efficiency of titrant generation at the working electrode. End-point detection can be accomplished with potentiometry, amperometry, biamperometry, bipotentiometry, photometry, or by using a visual indicator. The main advantages are that titration is possible with less stable titrants, the standardi- zation of titrant is not necessary, the volume of the test solution is not changed, and the method is easily automated."@en ; rdfs:isDefinedBy : ; rdfs:label "CoulometricTitration"@en ; skos:prefLabel "CoulometricTitration"@en ; - ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "titration in which the titrant is generated electrochemically, either by constant current or at constant potential. The titrant reacts stoichiometrically with the analyte, the amount of which is calculated using Faraday’s laws of electrolysis from the electric charge required to reach the end-point"@en . + ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "Titration in which the titrant is generated electrochemically, either by constant current or at constant potential. The titrant reacts stoichiometrically with the analyte, the amount of which is calculated using Faraday’s laws of electrolysis from the electric charge required to reach the end-point. Coulometric titrations are usually carried out in convective mass transfer mode using a large surface working electrode. The reference and auxiliary electrodes are located in sepa- rate compartments. A basic requirement is a 100 % current efficiency of titrant generation at the working electrode. End-point detection can be accomplished with potentiometry, amperometry, biamperometry, bipotentiometry, photometry, or by using a visual indicator. The main advantages are that titration is possible with less stable titrants, the standardi- zation of titrant is not necessary, the volume of the test solution is not changed, and the method is easily automated."@en . ### https://w3id.org/emmo/domain/characterisation-methodology/chameo#Coulometry :Coulometry rdf:type owl:Class ; rdfs:subClassOf :ElectrochemicalTesting ; - rdfs:comment "Coulometry used to measure the amount of substance is a primary reference measurement procedure [VIM 2.8] not requiring calibration with a standard for a quantity of the same kind (i.e. amount of substance)."@en , - "The coulometric experiment can be carried out at controlled (constant) potential (see direct coulometry at controlled potential) or controlled (constant) current (see direct coulometry at controlled current)."@en , - "electrochemical measurement principle in which the electric charge required to carry out a known electrochemical reaction is measured. By Faraday’s laws of electrolysis, the amount of substance is proportional to the charge"@en , - "" ; + rdfs:comment "Electrochemical measurement principle in which the electric charge required to carry out a known electrochemical reaction is measured. By Faraday’s laws of electrolysis, the amount of substance is proportional to the charge. Coulometry used to measure the amount of substance is a primary reference measurement procedure [VIM 2.8] not requiring calibration with a standard for a quantity of the same kind (i.e. amount of substance). The coulometric experiment can be carried out at controlled (constant) potential (see direct coulometry at controlled potential) or controlled (constant) current (see direct coulometry at controlled current)."@en ; rdfs:isDefinedBy : ; rdfs:label "Coulometry"@en ; skos:prefLabel "Coulometry"@en ; ns1:EMMO_26bf1bef_d192_4da6_b0eb_d2209698fb54 "https://www.wikidata.org/wiki/Q1136979" ; ns1:EMMO_50c298c2_55a2_4068_b3ac_4e948c33181f "https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-04-13" ; - ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "electrochemical measurement principle in which the electric charge required to carry out a known electrochemical reaction is measured. By Faraday’s laws of electrolysis, the amount of substance is proportional to the charge"@en ; + ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "Electrochemical measurement principle in which the electric charge required to carry out a known electrochemical reaction is measured. By Faraday’s laws of electrolysis, the amount of substance is proportional to the charge. Coulometry used to measure the amount of substance is a primary reference measurement procedure [VIM 2.8] not requiring calibration with a standard for a quantity of the same kind (i.e. amount of substance). The coulometric experiment can be carried out at controlled (constant) potential (see direct coulometry at controlled potential) or controlled (constant) current (see direct coulometry at controlled current)."@en ; ns1:EMMO_c84c6752_6d64_48cc_9500_e54a3c34898d "https://en.wikipedia.org/wiki/Coulometry"@en ; ns1:EMMO_fe015383_afb3_44a6_ae86_043628697aa2 "https://doi.org/10.1515/pac-2018-0109"@en . @@ -24662,8 +24621,7 @@ NOTE 4 A measuring system can be used as a measurement standard."""@en ; ### https://w3id.org/emmo/domain/characterisation-methodology/chameo#CreepTesting :CreepTesting rdf:type owl:Class ; rdfs:subClassOf :MechanicalTesting ; - rdfs:comment "The creep test is a destructive materials testing method for determination of the long-term strength and heat resistance of a material. When running a creep test, the specimen is subjected to increased temperature conditions for an extended period of time and loaded with a constant tensile force or tensile stress."@en , - "" ; + rdfs:comment "The creep test is a destructive materials testing method for determination of the long-term strength and heat resistance of a material. When running a creep test, the specimen is subjected to increased temperature conditions for an extended period of time and loaded with a constant tensile force or tensile stress."@en ; rdfs:isDefinedBy : ; rdfs:label "CreepTesting"@en ; skos:prefLabel "CreepTesting"@en ; @@ -24682,12 +24640,12 @@ NOTE 4 A measuring system can be used as a measurement standard."""@en ; ### https://w3id.org/emmo/domain/characterisation-methodology/chameo#CyclicChronopotentiometry :CyclicChronopotentiometry rdf:type owl:Class ; rdfs:subClassOf :Chronopotentiometry ; - rdfs:comment "chronopotentiometry where the change in applied current undergoes a cyclic current reversal"@en , - "" ; + rdfs:comment "Chronopotentiometry where the change in applied current undergoes a cyclic current reversal."@en ; rdfs:isDefinedBy : ; rdfs:label "CyclicChronopotentiometry"@en ; skos:prefLabel "CyclicChronopotentiometry"@en ; - ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "chronopotentiometry where the change in applied current undergoes a cyclic current reversal"@en . + ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "Chronopotentiometry where the change in applied current undergoes a cyclic current reversal."@en , + "chronopotentiometry where the change in applied current undergoes a cyclic current reversal"@en . [ rdf:type owl:Axiom ; owl:annotatedSource :CyclicChronopotentiometry ; @@ -24700,19 +24658,14 @@ NOTE 4 A measuring system can be used as a measurement standard."""@en ; ### https://w3id.org/emmo/domain/characterisation-methodology/chameo#CyclicVoltammetry :CyclicVoltammetry rdf:type owl:Class ; rdfs:subClassOf :Voltammetry ; - rdfs:comment "Cyclic voltammetry is frequently used for the investigation of mechanisms of electrochemi- cal/electrode reactions. The current-potential curve may be modelled to obtain reaction mechanisms and electrochemical parameters."@en , - "Normally the initial potential is chosen where no electrode reaction occurs and the switch- ing potential is greater (more positive for an oxidation or more negative for a reduction) than the peak potential of the analyte reaction."@en , - "The initial potential is usually the negative or positive limit of the cycle but can have any value between the two limits, as can the initial scan direction. The limits of the potential are known as the switching potentials."@en , - "The plot of current against potential is termed a cyclic voltammogram. Usually peak-shaped responses are obtained for scans in both directions."@en , - "voltammetry in which the electric current is recorded as the electrode potential is varied with time cycli- cally between two potential limits, normally at a constant scan rate"@en , - "" ; + rdfs:comment "Voltammetry in which the electric current is recorded as the electrode potential is varied with time cyclically between two potential limits, normally at a constant scan rate. Cyclic voltammetry is frequently used for the investigation of mechanisms of electrochemical/electrode reactions. The current-potential curve may be modelled to obtain reaction mechanisms and electrochemical parameters. Normally the initial potential is chosen where no electrode reaction occurs and the switching potential is greater (more positive for an oxidation or more negative for a reduction) than the peak potential of the analyte reaction. The initial potential is usually the negative or positive limit of the cycle but can have any value between the two limits, as can the initial scan direction. The limits of the potential are known as the switching potentials. The plot of current against potential is termed a cyclic voltammogram. Usually peak-shaped responses are obtained for scans in both directions."@en ; rdfs:isDefinedBy : ; rdfs:label "CyclicVoltammetry"@en ; skos:altLabel "CV"@en ; skos:prefLabel "CyclicVoltammetry"@en ; ns1:EMMO_26bf1bef_d192_4da6_b0eb_d2209698fb54 "https://www.wikidata.org/wiki/Q1147647" ; ns1:EMMO_6dd685dd_1895_46e4_b227_be9f7d643c25 "https://dbpedia.org/page/Cyclic_voltammetry"^^xsd:anyURI ; - ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "voltammetry in which the electric current is recorded as the electrode potential is varied with time cycli- cally between two potential limits, normally at a constant scan rate"@en ; + ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "Voltammetry in which the electric current is recorded as the electrode potential is varied with time cyclically between two potential limits, normally at a constant scan rate. Cyclic voltammetry is frequently used for the investigation of mechanisms of electrochemical/electrode reactions. The current-potential curve may be modelled to obtain reaction mechanisms and electrochemical parameters. Normally the initial potential is chosen where no electrode reaction occurs and the switching potential is greater (more positive for an oxidation or more negative for a reduction) than the peak potential of the analyte reaction. The initial potential is usually the negative or positive limit of the cycle but can have any value between the two limits, as can the initial scan direction. The limits of the potential are known as the switching potentials. The plot of current against potential is termed a cyclic voltammogram. Usually peak-shaped responses are obtained for scans in both directions."@en ; ns1:EMMO_c84c6752_6d64_48cc_9500_e54a3c34898d "https://en.wikipedia.org/wiki/Cyclic_voltammetry"^^xsd:anyURI ; ns1:EMMO_fe015383_afb3_44a6_ae86_043628697aa2 "https://doi.org/10.1515/pac-2018-0109"@en . @@ -24720,34 +24673,28 @@ NOTE 4 A measuring system can be used as a measurement standard."""@en ; ### https://w3id.org/emmo/domain/characterisation-methodology/chameo#DCPolarography :DCPolarography rdf:type owl:Class ; rdfs:subClassOf :Voltammetry ; - rdfs:comment "If the whole scan is performed on a single growing drop, the technique should be called single drop scan voltammetry. The term polarography in this context is discouraged."@en , - "This is the oldest variant of polarographic techniques, introduced by Jaroslav Heyrovský (1890 – 1967)."@en , - "Usually the drop time is between 1 and 5 s and the pseudo-steady-state wave-shaped dependence on potential is called a polarogram. If the limiting current is controlled by dif- fusion, it is expressed by the Ilkovich equation."@en , - "linear scan voltammetry with slow scan rate in which a dropping mercury electrode is used as the working electrode"@en , - "" ; + rdfs:comment "Linear scan voltammetry with slow scan rate in which a dropping mercury electrode is used as the working electrode. If the whole scan is performed on a single growing drop, the technique should be called single drop scan voltammetry. The term polarography in this context is discouraged. This is the oldest variant of polarographic techniques, introduced by Jaroslav Heyrovský (1890 – 1967). Usually the drop time is between 1 and 5 s and the pseudo-steady-state wave-shaped dependence on potential is called a polarogram. If the limiting current is controlled by diffusion, it is expressed by the Ilkovich equation."@en ; rdfs:isDefinedBy : ; rdfs:label "DCPolarography"@en ; skos:prefLabel "DCPolarography"@en ; - ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "linear scan voltammetry with slow scan rate in which a dropping mercury electrode is used as the working electrode"@en ; + ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "Linear scan voltammetry with slow scan rate in which a dropping mercury electrode is used as the working electrode. If the whole scan is performed on a single growing drop, the technique should be called single drop scan voltammetry. The term polarography in this context is discouraged. This is the oldest variant of polarographic techniques, introduced by Jaroslav Heyrovský (1890 – 1967). Usually the drop time is between 1 and 5 s and the pseudo-steady-state wave-shaped dependence on potential is called a polarogram. If the limiting current is controlled by diffusion, it is expressed by the Ilkovich equation."@en ; ns1:EMMO_fe015383_afb3_44a6_ae86_043628697aa2 "https://doi.org/10.1515/pac-2018-0109"@en . ### https://w3id.org/emmo/domain/characterisation-methodology/chameo#DataAcquisitionRate :DataAcquisitionRate rdf:type owl:Class ; rdfs:subClassOf ns1:EMMO_b7bcff25_ffc3_474e_9ab5_01b1664bd4ba ; - rdfs:comment "Quantify the raw data acquisition rate, if applicable."@en , - "" ; + rdfs:comment "Quantifies the raw data acquisition rate, if applicable."@en ; rdfs:isDefinedBy : ; rdfs:label "DataAcquisitionRate"@en ; skos:prefLabel "DataAcquisitionRate"@en ; - ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "Quantify the raw data acquisition rate, if applicable."@en . + ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "Quantifies the raw data acquisition rate, if applicable."@en . ### https://w3id.org/emmo/domain/characterisation-methodology/chameo#DataAnalysis :DataAnalysis rdf:type owl:Class ; rdfs:subClassOf ns1:EMMO_1c7f2dfe_0db4_4bf6_a0f6_853054a34ead ; - rdfs:comment "Data processing activities performed on the secondary data to determine the characterisation property (e.g. classification, quantification), which can be performed manually or exploiting a model."@en , - "" ; + rdfs:comment "Data processing activities performed on the secondary data to determine the characterisation property (e.g. classification, quantification), which can be performed manually or exploiting a model."@en ; rdfs:isDefinedBy : ; rdfs:label "DataAnalysis"@en ; skos:prefLabel "DataAnalysis"@en ; @@ -24768,8 +24715,7 @@ NOTE 4 A measuring system can be used as a measurement standard."""@en ; :DataNormalisation rdf:type owl:Class ; rdfs:subClassOf :DataPreparation ; rdfs:comment "Data normalization involves adjusting raw data to a notionally common scale."@en , - "It involves the creation of shifted and/or scaled versions of the values to allow post-processing in a way that eliminates the effects of influences on subsequent properties extraction."@en , - "" ; + "It involves the creation of shifted and/or scaled versions of the values to allow post-processing in a way that eliminates the effects of influences on subsequent properties extraction."@en ; rdfs:isDefinedBy : ; rdfs:label "DataNormalisation"@en ; skos:prefLabel "DataNormalisation"@en ; @@ -24780,28 +24726,27 @@ NOTE 4 A measuring system can be used as a measurement standard."""@en ; ### https://w3id.org/emmo/domain/characterisation-methodology/chameo#DataPostProcessing :DataPostProcessing rdf:type owl:Class ; rdfs:subClassOf ns1:EMMO_1c7f2dfe_0db4_4bf6_a0f6_853054a34ead ; - rdfs:comment "Analysis, that allows one to calculate the final material property from the calibrated primary data." ; + rdfs:comment "Analysis, that allows one to calculate the final material property from the calibrated primary data."@en ; rdfs:isDefinedBy : ; rdfs:label "DataPostProcessing"@en ; skos:prefLabel "DataPostProcessing"@en ; - ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "Analysis, that allows one to calculate the final material property from the calibrated primary data." . + ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "Analysis, that allows one to calculate the final material property from the calibrated primary data."@en . ### https://w3id.org/emmo/domain/characterisation-methodology/chameo#DataPreparation :DataPreparation rdf:type owl:Class ; rdfs:subClassOf ns1:EMMO_1c7f2dfe_0db4_4bf6_a0f6_853054a34ead ; - rdfs:comment "Data preparation is the process of manipulating (or pre-processing) data (which may come from disparate data sources) to improve their quality or reduce bias in subsequent analysis." ; + rdfs:comment "Data preparation is the process of manipulating (or pre-processing) data (which may come from disparate data sources) to improve their quality or reduce bias in subsequent analysis."@en ; rdfs:isDefinedBy : ; rdfs:label "DataPreparation"@en ; skos:prefLabel "DataPreparation"@en ; - ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "Data preparation is the process of manipulating (or pre-processing) data (which may come from disparate data sources) to improve their quality or reduce bias in subsequent analysis." . + ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "Data preparation is the process of manipulating (or pre-processing) data (which may come from disparate data sources) to improve their quality or reduce bias in subsequent analysis."@en . ### https://w3id.org/emmo/domain/characterisation-methodology/chameo#DataProcessingThroughCalibration :DataProcessingThroughCalibration rdf:type owl:Class ; rdfs:subClassOf owl:Thing ; - rdfs:comment "Describes how raw data are corrected and/or modified through calibrations."@en , - "" ; + rdfs:comment "Describes how raw data are corrected and/or modified through calibrations."@en ; rdfs:isDefinedBy : ; rdfs:label "DataProcessingThroughCalibration"@en ; skos:prefLabel "DataProcessingThroughCalibration"@en ; @@ -24811,8 +24756,7 @@ NOTE 4 A measuring system can be used as a measurement standard."""@en ; ### https://w3id.org/emmo/domain/characterisation-methodology/chameo#DataQuality :DataQuality rdf:type owl:Class ; rdfs:subClassOf owl:Thing ; - rdfs:comment "Evaluation of quality indicators to determine how well suited a data set is to be used for the characterisation of a material."@en , - "" ; + rdfs:comment "Evaluation of quality indicators to determine how well suited a data set is to be used for the characterisation of a material."@en ; rdfs:isDefinedBy : ; rdfs:label "DataQuality"@en ; skos:prefLabel "DataQuality"@en ; @@ -24823,8 +24767,7 @@ NOTE 4 A measuring system can be used as a measurement standard."""@en ; ### https://w3id.org/emmo/domain/characterisation-methodology/chameo#Detector :Detector rdf:type owl:Class ; rdfs:subClassOf :CharacterisationHardware ; - rdfs:comment "Physical device (or the chain of devices) that is used to measure, quantify and store the signal after its interaction with the sample."@en , - "" ; + rdfs:comment "Physical device (or the chain of devices) that is used to measure, quantify and store the signal after its interaction with the sample."@en ; rdfs:isDefinedBy : ; rdfs:label "Detector"@en ; skos:prefLabel "Detector"@en ; @@ -24836,8 +24779,7 @@ NOTE 4 A measuring system can be used as a measurement standard."""@en ; ### https://w3id.org/emmo/domain/characterisation-methodology/chameo#DielectricAndImpedanceSpectroscopy :DielectricAndImpedanceSpectroscopy rdf:type owl:Class ; rdfs:subClassOf :Spectroscopy ; - rdfs:comment "Dielectric spectroscopy (DS) or impedance spectroscopy, also known as electrochemical impedance spectroscopy, is frequently used to study the response of a sample subjected to an applied electric field of fixed or changing frequency. DS describes the dielectric properties of a material as a function of frequency. In DS, the radio and microwave frequency regions of the electromagnetic spectrum have been successfully made to interact with materials, so as to study the behavior of molecules. The interaction of applied alternating electric fields with dipoles possessing reorientation mobility in materials is also dealt by DS."@en , - "" ; + rdfs:comment "Dielectric spectroscopy (DS) or impedance spectroscopy, also known as electrochemical impedance spectroscopy, is frequently used to study the response of a sample subjected to an applied electric field of fixed or changing frequency. DS describes the dielectric properties of a material as a function of frequency. In DS, the radio and microwave frequency regions of the electromagnetic spectrum have been successfully made to interact with materials, so as to study the behavior of molecules. The interaction of applied alternating electric fields with dipoles possessing reorientation mobility in materials is also dealt by DS."@en ; rdfs:isDefinedBy : ; rdfs:label "DielectricAndImpedanceSpectroscopy"@en ; skos:prefLabel "DielectricAndImpedanceSpectroscopy"@en ; @@ -24847,22 +24789,18 @@ NOTE 4 A measuring system can be used as a measurement standard."""@en ; ### https://w3id.org/emmo/domain/characterisation-methodology/chameo#Dielectrometry :Dielectrometry rdf:type owl:Class ; rdfs:subClassOf :ElectrochemicalTesting ; - rdfs:comment "Dielectrometric titrations use dielectrometry for the end-point detection."@en , - "The method is used to monitor the purity of dielectrics, for example to detect small amounts of moisture."@en , - "electrochemical measurement principle based on the measurement of the dielectric constant of a sample resulting from the orientation of particles (molecules or ions) that have a dipole moment in an electric field"@en , - "" ; + rdfs:comment "Electrochemical measurement principle based on the measurement of the dielectric constant of a sample resulting from the orientation of particles (molecules or ions) that have a dipole moment in an electric field. Dielectrometric titrations use dielectrometry for the end-point detection. The method is used to monitor the purity of dielectrics, for example to detect small amounts of moisture."@en ; rdfs:isDefinedBy : ; rdfs:label "Dielectrometry"@en ; skos:prefLabel "Dielectrometry"@en ; - ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "electrochemical measurement principle based on the measurement of the dielectric constant of a sample resulting from the orientation of particles (molecules or ions) that have a dipole moment in an electric field"@en ; + ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "Electrochemical measurement principle based on the measurement of the dielectric constant of a sample resulting from the orientation of particles (molecules or ions) that have a dipole moment in an electric field. Dielectrometric titrations use dielectrometry for the end-point detection. The method is used to monitor the purity of dielectrics, for example to detect small amounts of moisture."@en ; ns1:EMMO_fe015383_afb3_44a6_ae86_043628697aa2 "https://doi.org/10.1515/pac-2018-0109"@en . ### https://w3id.org/emmo/domain/characterisation-methodology/chameo#DifferentialLinearPulseVoltammetry :DifferentialLinearPulseVoltammetry rdf:type owl:Class ; rdfs:subClassOf :DifferentialPulseVoltammetry ; - rdfs:comment "Differential Pulse Voltammetry in which small potential pulses are superimposed onto a linearly varying potential."@en , - "" ; + rdfs:comment "Differential Pulse Voltammetry in which small potential pulses are superimposed onto a linearly varying potential."@en ; rdfs:isDefinedBy : ; rdfs:label "DifferentialLinearPulseVoltammetry"@en ; skos:prefLabel "DifferentialLinearPulseVoltammetry"@en ; @@ -24879,17 +24817,13 @@ NOTE 4 A measuring system can be used as a measurement standard."""@en ; ### https://w3id.org/emmo/domain/characterisation-methodology/chameo#DifferentialPulseVoltammetry :DifferentialPulseVoltammetry rdf:type owl:Class ; rdfs:subClassOf :Voltammetry ; - rdfs:comment "Differential pulse polarography is differential pulse voltammetry in which a dropping mercury electrode is used as the working electrode. A pulse is applied before the mechani- cally enforced end of the drop and the current is sampled twice: just before the onset of the pulse and just before its end. The pulse width is usually 10 to 20 % of the drop life. The drop dislodgement is synchronized with current sampling, which is carried out as in DPV."@en , - "The ratio of faradaic current to charging current is enhanced and the negative influence of charging current is partially eliminated in the same way as in normal pulse voltammetry (NPV). Moreover, subtraction of the charging current sampled before the application of the pulse further decreases its negative influence. Due to the more enhanced signal (faradaic current) to noise (charging current) ratio, the limit of detection is lower than with NPV."@en , - "The sensitivity of DPV depends on the reversibility of the electrode reaction of the analyte."@en , - "voltammetry in which small potential pulses (constant height 10 to 100 mV, constant width 10 to 100 ms) are superimposed onto a linearly varying potential or onto a staircase potential ramp. The current is sampled just before the onset of the pulse (e.g. 10 to 20 ms) and for the same sampling time just before the end of the pulse. The difference between the two sampled currents is plotted versus the potential applied before the pulse. Thus, a differential pulse voltammogram is peak-shaped"@en , - "" ; + rdfs:comment "Voltammetry in which small potential pulses (constant height 10 to 100 mV, constant width 10 to 100 ms) are superimposed onto a linearly varying potential or onto a staircase potential ramp. The current is sampled just before the onset of the pulse (e.g. 10 to 20 ms) and for the same sampling time just before the end of the pulse. The difference between the two sampled currents is plotted versus the potential applied before the pulse. Thus, a differential pulse voltammogram is peak-shaped. Differential pulse polarography is differential pulse voltammetry in which a dropping mercury electrode is used as the working electrode. A pulse is applied before the mechani- cally enforced end of the drop and the current is sampled twice: just before the onset of the pulse and just before its end. The pulse width is usually 10 to 20 % of the drop life. The drop dislodgement is synchronized with current sampling, which is carried out as in DPV. The ratio of faradaic current to charging current is enhanced and the negative influence of charging current is partially eliminated in the same way as in normal pulse voltammetry (NPV). Moreover, subtraction of the charging current sampled before the application of the pulse further decreases its negative influence. Due to the more enhanced signal (faradaic current) to noise (charging current) ratio, the limit of detection is lower than with NPV. The sensitivity of DPV depends on the reversibility of the electrode reaction of the analyte."@en ; rdfs:isDefinedBy : ; rdfs:label "DifferentialPulseVoltammetry"@en ; skos:altLabel "DPV"@en ; skos:prefLabel "DifferentialPulseVoltammetry"@en ; ns1:EMMO_26bf1bef_d192_4da6_b0eb_d2209698fb54 "https://www.wikidata.org/wiki/Q5275361" ; - ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "voltammetry in which small potential pulses (constant height 10 to 100 mV, constant width 10 to 100 ms) are superimposed onto a linearly varying potential or onto a staircase potential ramp. The current is sampled just before the onset of the pulse (e.g. 10 to 20 ms) and for the same sampling time just before the end of the pulse. The difference between the two sampled currents is plotted versus the potential applied before the pulse. Thus, a differential pulse voltammogram is peak-shaped"@en ; + ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "Voltammetry in which small potential pulses (constant height 10 to 100 mV, constant width 10 to 100 ms) are superimposed onto a linearly varying potential or onto a staircase potential ramp. The current is sampled just before the onset of the pulse (e.g. 10 to 20 ms) and for the same sampling time just before the end of the pulse. The difference between the two sampled currents is plotted versus the potential applied before the pulse. Thus, a differential pulse voltammogram is peak-shaped. Differential pulse polarography is differential pulse voltammetry in which a dropping mercury electrode is used as the working electrode. A pulse is applied before the mechani- cally enforced end of the drop and the current is sampled twice: just before the onset of the pulse and just before its end. The pulse width is usually 10 to 20 % of the drop life. The drop dislodgement is synchronized with current sampling, which is carried out as in DPV. The ratio of faradaic current to charging current is enhanced and the negative influence of charging current is partially eliminated in the same way as in normal pulse voltammetry (NPV). Moreover, subtraction of the charging current sampled before the application of the pulse further decreases its negative influence. Due to the more enhanced signal (faradaic current) to noise (charging current) ratio, the limit of detection is lower than with NPV. The sensitivity of DPV depends on the reversibility of the electrode reaction of the analyte."@en ; ns1:EMMO_c84c6752_6d64_48cc_9500_e54a3c34898d "https://en.wikipedia.org/wiki/Differential_pulse_voltammetry"@en ; ns1:EMMO_fe015383_afb3_44a6_ae86_043628697aa2 "https://doi.org/10.1515/pac-2018-0109"@en . @@ -24906,8 +24840,7 @@ NOTE 4 A measuring system can be used as a measurement standard."""@en ; ### https://w3id.org/emmo/domain/characterisation-methodology/chameo#DifferentialScanningCalorimetry :DifferentialScanningCalorimetry rdf:type owl:Class ; rdfs:subClassOf :ThermochemicalTesting ; - rdfs:comment "Differential scanning calorimetry (DSC) is a thermoanalytical technique in which the difference in the amount of heat required to increase the temperature of a sample and reference is measured as a function of temperature. Both the sample and reference are maintained at nearly the same temperature throughout the experiment. Generally, the temperature program for a DSC analysis is designed such that the sample holder temperature increases linearly as a function of time. The reference sample should have a well-defined heat capacity over the range of temperatures to be scanned. Additionally, the reference sample must be stable, of high purity, and must not experience much change across the temperature scan. Typically, reference standards have been metals such as indium, tin, bismuth, and lead, but other standards such as polyethylene and fatty acids have been proposed to study polymers and organic compounds, respectively."@en , - "" ; + rdfs:comment "Differential scanning calorimetry (DSC) is a thermoanalytical technique in which the difference in the amount of heat required to increase the temperature of a sample and reference is measured as a function of temperature. Both the sample and reference are maintained at nearly the same temperature throughout the experiment. Generally, the temperature program for a DSC analysis is designed such that the sample holder temperature increases linearly as a function of time. The reference sample should have a well-defined heat capacity over the range of temperatures to be scanned. Additionally, the reference sample must be stable, of high purity, and must not experience much change across the temperature scan. Typically, reference standards have been metals such as indium, tin, bismuth, and lead, but other standards such as polyethylene and fatty acids have been proposed to study polymers and organic compounds, respectively."@en ; rdfs:isDefinedBy : ; rdfs:label "DifferentialScanningCalorimetry"@en ; skos:altLabel "DSC" ; @@ -24918,8 +24851,7 @@ NOTE 4 A measuring system can be used as a measurement standard."""@en ; ### https://w3id.org/emmo/domain/characterisation-methodology/chameo#DifferentialStaircasePulseVoltammetry :DifferentialStaircasePulseVoltammetry rdf:type owl:Class ; rdfs:subClassOf :DifferentialPulseVoltammetry ; - rdfs:comment "Differential Pulse Voltammetry in which small potential pulses are superimposed onto a staircase potential ramp."@en , - "" ; + rdfs:comment "Differential Pulse Voltammetry in which small potential pulses are superimposed onto a staircase potential ramp."@en ; rdfs:isDefinedBy : ; rdfs:label "DifferentialStaircasePulseVoltammetry"@en ; skos:prefLabel "DifferentialStaircasePulseVoltammetry"@en ; @@ -24936,8 +24868,7 @@ NOTE 4 A measuring system can be used as a measurement standard."""@en ; ### https://w3id.org/emmo/domain/characterisation-methodology/chameo#DifferentialThermalAnalysis :DifferentialThermalAnalysis rdf:type owl:Class ; rdfs:subClassOf :ThermochemicalTesting ; - rdfs:comment "Differential thermal analysis (DTA) is a thermoanalytic technique that is similar to differential scanning calorimetry. In DTA, the material under study and an inert reference are made to undergo identical thermal cycles, (i.e., same cooling or heating programme) while recording any temperature difference between sample and reference.[1] This differential temperature is then plotted against time, or against temperature (DTA curve, or thermogram). Changes in the sample, either exothermic or endothermic, can be detected relative to the inert reference. Thus, a DTA curve provides data on the transformations that have occurred, such as glass transitions, crystallization, melting and sublimation. The area under a DTA peak is the enthalpy change and is not affected by the heat capacity of the sample."@en , - "" ; + rdfs:comment "Differential thermal analysis (DTA) is a thermoanalytic technique that is similar to differential scanning calorimetry. In DTA, the material under study and an inert reference are made to undergo identical thermal cycles, (i.e., same cooling or heating programme) while recording any temperature difference between sample and reference.[1] This differential temperature is then plotted against time, or against temperature (DTA curve, or thermogram). Changes in the sample, either exothermic or endothermic, can be detected relative to the inert reference. Thus, a DTA curve provides data on the transformations that have occurred, such as glass transitions, crystallization, melting and sublimation. The area under a DTA peak is the enthalpy change and is not affected by the heat capacity of the sample."@en ; rdfs:isDefinedBy : ; rdfs:label "DifferentialThermalAnalysis"@en ; skos:altLabel "DTA" ; @@ -24948,8 +24879,7 @@ NOTE 4 A measuring system can be used as a measurement standard."""@en ; ### https://w3id.org/emmo/domain/characterisation-methodology/chameo#Dilatometry :Dilatometry rdf:type owl:Class ; rdfs:subClassOf :CharacterisationTechnique ; - rdfs:comment "Dilatometry is a method for characterising the dimensional changes of materials with variation of temperature conditions."@en , - "" ; + rdfs:comment "Dilatometry is a method for characterising the dimensional changes of materials with variation of temperature conditions."@en ; rdfs:isDefinedBy : ; rdfs:label "Dilatometry"@en ; rdfs:seeAlso "https://www.lboro.ac.uk/research/lmcc/facilities/dilatometry/#:~:text=Dilatometry%20is%20a%20method%20for,to%20mimic%20an%20industrial%20process." ; @@ -26677,19 +26607,19 @@ ns1:EMMO_08cb807c_e626_447b_863f_e2835540e918 rdf:type owl:NamedIndividual , ns1:EMMO_31252f35_c767_4b97_a877_1235076c3e13 "The universe is considered as a causally self-connected object, encompassing all other objects. For this reason is unique."@en . -[ owl:minQualifiedCardinality "1"^^xsd:nonNegativeInteger +[ owl:qualifiedCardinality "4"^^xsd:nonNegativeInteger ] . [ owl:qualifiedCardinality "1"^^xsd:nonNegativeInteger ] . -[ owl:minQualifiedCardinality "1"^^xsd:nonNegativeInteger +[ owl:qualifiedCardinality "3"^^xsd:nonNegativeInteger ] . [ owl:qualifiedCardinality "1"^^xsd:nonNegativeInteger ] . -[ owl:minQualifiedCardinality "2"^^xsd:nonNegativeInteger +[ owl:qualifiedCardinality "1"^^xsd:nonNegativeInteger ] . [ owl:qualifiedCardinality "1"^^xsd:nonNegativeInteger @@ -26704,7 +26634,7 @@ ns1:EMMO_08cb807c_e626_447b_863f_e2835540e918 rdf:type owl:NamedIndividual , [ owl:qualifiedCardinality "1"^^xsd:nonNegativeInteger ] . -[ owl:qualifiedCardinality "1"^^xsd:nonNegativeInteger +[ owl:minQualifiedCardinality "2"^^xsd:nonNegativeInteger ] . [ owl:qualifiedCardinality "1"^^xsd:nonNegativeInteger @@ -26716,13 +26646,13 @@ ns1:EMMO_08cb807c_e626_447b_863f_e2835540e918 rdf:type owl:NamedIndividual , [ owl:qualifiedCardinality "1"^^xsd:nonNegativeInteger ] . -[ owl:qualifiedCardinality "1"^^xsd:nonNegativeInteger +[ owl:minQualifiedCardinality "1"^^xsd:nonNegativeInteger ] . -[ owl:qualifiedCardinality "4"^^xsd:nonNegativeInteger +[ owl:minQualifiedCardinality "1"^^xsd:nonNegativeInteger ] . -[ owl:qualifiedCardinality "3"^^xsd:nonNegativeInteger +[ owl:qualifiedCardinality "1"^^xsd:nonNegativeInteger ] . ################################################################# diff --git a/chameo.html b/chameo.html index c41f9bc..9b9af1d 100644 --- a/chameo.html +++ b/chameo.html @@ -49,37 +49,37 @@

ACVoltammetryAnnotations

- - + + - + + + + + - + - - + + - - + + - - + + - - - - @@ -102,14 +102,6 @@

AbrasiveStrippingVoltammetryAnnotations

- - - - - - - - @@ -118,6 +110,14 @@

AbrasiveStrippingVoltammetryElucidation

+ + + + + + + + @@ -140,10 +140,6 @@

AccessConditionsAnnotations

- - - - @@ -152,6 +148,10 @@

AccessConditionsElucidation

+ + + + @@ -178,25 +178,25 @@

AdsorptiveStrippingVoltammetryAnnotations

- - - - - - - - + + + + - - + + + + + + @@ -224,10 +224,6 @@

AlphaSpectrometryAnnotations

- - - - @@ -236,6 +232,10 @@

AlphaSpectrometryElucidation

+ + + + @@ -259,35 +259,19 @@

AmperometryAnnotations

- - - - - - + + - + - + - - - - - - - - - - - - @@ -316,14 +300,6 @@

AnalyticalElectronMicroscopyAnnotations

- - - - - - - - @@ -332,6 +308,10 @@

AnalyticalElectronMicroscopyElucidation

+ + + + @@ -354,38 +334,26 @@

AnodicStrippingVoltammetryAnnotations

- - - - - - - - - - - - - - - - - + - - + + + + + + @@ -408,18 +376,10 @@

AtomProbeTomographyAnnotations

- - - - - - - - @@ -428,6 +388,14 @@

AtomProbeTomographyAltlabel

+ + + + + + + + @@ -450,10 +418,6 @@

AtomicForceMicroscopy

- - - - @@ -462,6 +426,10 @@

AtomicForceMicroscopyElucidation

+ + + + @@ -484,30 +452,30 @@

BrunauerEmmettTellerMethodAnnotations

- - - - - - - - - - + + + + + + + + + + @@ -530,10 +498,6 @@

CalibrationDataAnnotations

- - - - @@ -542,6 +506,10 @@

CalibrationDataElucidation

+ + + + @@ -564,10 +532,6 @@

CalibrationDataPostProcessingAnnotations

- - - - @@ -576,6 +540,10 @@

CalibrationDataPostProcessingElucidation

+ + + + @@ -598,6 +566,14 @@

CalibrationProcessAnnotations

+ + + + + + + + @@ -615,21 +591,13 @@

CalibrationProcessUsually the calibration process involve a reference sample (with pre-defined, specific, and stable physical characteristics and known properties), in order to extract calibration data. In this way, the accuracy of the measurement tool and its components (for example the probe) will be evaluated and confirmed.

- - - - - - + + - - - - @@ -660,10 +628,6 @@

CalibrationTaskAnnotations

- - - - @@ -672,6 +636,10 @@

CalibrationTaskElucidation

+ + + + @@ -698,10 +666,6 @@

CalorimetryAnnotations

- - - - @@ -710,6 +674,10 @@

CalorimetryElucidation

+ + + + @@ -732,30 +700,30 @@

CathodicStrippingVoltammetryAnnotations

- - - - - - - - - - + + + + + + + + + + @@ -778,14 +746,14 @@

CharacterisationComponentAnnotations

- - - - + + + + @@ -808,10 +776,6 @@

CharacterisationData

- - - - @@ -820,6 +784,10 @@

CharacterisationDataElucidation

+ + + + @@ -842,10 +810,6 @@

CharacterisationDataValidationAnnotations

- - - - @@ -854,6 +818,10 @@

CharacterisationDataValidationElucidation

+ + + + @@ -877,23 +845,23 @@

CharacterisationEnvironmentAnnotations

- - + + - - + + - + - - + + - + @@ -926,14 +894,14 @@

CharacterisationEnvironmentPropertyAnnotations

- - - - + + + + @@ -957,19 +925,19 @@

CharacterisationExperimentAnnotations

- - + + - + - - + + - + @@ -994,10 +962,6 @@

CharacterisationHardwareAnnotations

- - - - @@ -1006,6 +970,10 @@

CharacterisationHardwareElucidation

+ + + + @@ -1028,14 +996,14 @@

CharacterisationHardwareSpecificationAnnotations

- - - - + + + + @@ -1059,24 +1027,24 @@

CharacterisationMeasurementInstrumentAnnotations

- - + + - + - + - - + + - - + + @@ -1086,10 +1054,6 @@

CharacterisationMeasurementInstrumentExample

- - - - @@ -1129,33 +1093,29 @@

CharacterisationMeasurementProcessAnnotations

- - + + - + - + - - + + - - + + - - - - @@ -1202,14 +1162,6 @@

CharacterisationMeasurementTaskAnnotations

- - - - - - - - @@ -1218,6 +1170,10 @@

CharacterisationMeasurementTaskElucidation

+ + + + @@ -1245,27 +1201,23 @@

CharacterisationProcedureAnnotations

- - - - - - + + - + - + - - + + - + @@ -1294,14 +1246,6 @@

CharacterisationProcedureValidationAnnotations

- - - - - - - - @@ -1310,6 +1254,10 @@

CharacterisationProcedureValidationElucidation

+ + + + @@ -1332,14 +1280,6 @@

CharacterisationPropertyAnnotations

- - - - - - - - @@ -1348,6 +1288,10 @@

CharacterisationPropertyElucidation

+ + + + @@ -1374,14 +1318,6 @@

CharacterisationProtocolAnnotations

- - - - - - - - @@ -1390,6 +1326,10 @@

CharacterisationProtocolElucidation

+ + + + @@ -1412,14 +1352,6 @@

CharacterisationSoftwareAnnotations

- - - - - - - - @@ -1428,6 +1360,10 @@

CharacterisationSoftwareElucidation

+ + + + @@ -1455,33 +1391,29 @@

CharacterisationSystemAnnotations

- - + + - - + + - + - - + + - - + + - - - - @@ -1512,14 +1444,14 @@

CharacterisationTask

- - - - + + + + @@ -1555,36 +1487,32 @@

CharacterisationTechniqueAnnotations

- - + + - - + + - - + + - - + + - - + + - + - - - - - - + + @@ -1609,23 +1537,19 @@

CharacterisationWorkflowAnnotations

- + + + + + - + - - - - - - - - - + @@ -1658,14 +1582,6 @@

CharacterisedSampleAnnotations

- - - - - - - - @@ -1674,6 +1590,10 @@

CharacterisedSampleElucidation

+ + + + @@ -1696,14 +1616,14 @@

ChargeDistributionAnnotations

- - - - + + + + @@ -1726,14 +1646,6 @@

ChromatographyAnnotations

- - - - - - - - @@ -1742,6 +1654,10 @@

ChromatographyElucidation

+ + + + @@ -1768,26 +1684,10 @@

ChronoamperometryAnnotations

- - - - - - - - - - - - - - - - @@ -1796,6 +1696,14 @@

ChronoamperometryAltlabel

+ + + + + + + + @@ -1822,25 +1730,17 @@

ChronocoulometryAnnotations

- - - - - - - - - - - - - + + + + + @@ -1868,25 +1768,17 @@

ChronopotentiometryAnnotations

- - - - - - - - - - - - - + + + + + @@ -1914,14 +1806,6 @@

CompressionTestingAnnotations

- - - - - - - - @@ -1930,6 +1814,10 @@

CompressionTestingElucidation

+ + + + @@ -1952,42 +1840,26 @@

ConductometricTitration

- - - - - - - - - - - - - - - - - - - - - + - - + + + + + + @@ -2011,24 +1883,24 @@

ConductometryAnnotations

- - + + - - + + - + - - + + - - + + @@ -2038,14 +1910,6 @@

ConductometryIupacreference

- - - - - - - - @@ -2068,14 +1932,6 @@

ConfocalMicroscopyAnnotations

- - - - - - - - @@ -2084,6 +1940,10 @@

ConfocalMicroscopyElucidation

+ + + + @@ -2106,29 +1966,17 @@

CoulometricTitration

- - - - - - - - - - - - - - - - - + + + + + @@ -2153,45 +2001,33 @@

CoulometryAnnotations

- - - - - - + + - - + + - + - - + + - - + + - - - - - - - - @@ -2214,14 +2050,6 @@

CreepTestingAnnotations

- - - - - - - - @@ -2230,6 +2058,10 @@

CreepTestingElucidation

+ + + + @@ -2252,14 +2084,14 @@

CriticalAndSupercriticalChromatographyAnnotations

- - - - + + + + @@ -2282,22 +2114,22 @@

CyclicChronopotentiometryAnnotations

- - - - - - - - + + + + + + + + @@ -2321,60 +2153,40 @@

CyclicVoltammetryAnnotations

- - - - - - - - - - + + - - + + - - + + - + - - + + - - + + - - + + - - - - - - - - - - - - - - + + @@ -2394,33 +2206,17 @@

DCPolarographyAnnotations

- - - - - - - - - - - - - - - - - - - - - + + + + + @@ -2448,21 +2244,17 @@

DataAcquisitionRateAnnotations

- - - - - - - - - + + + + + @@ -2486,14 +2278,6 @@

DataAnalysisAnnotations

- - - - - - - - @@ -2502,6 +2286,10 @@

DataAnalysisElucidation

+ + + + @@ -2524,10 +2312,6 @@

DataFilteringAnnotations

- - - - @@ -2536,6 +2320,10 @@

DataFilteringElucidation

+ + + + @@ -2559,11 +2347,11 @@

DataNormalisationAnnotations

- - + + - + @@ -2572,15 +2360,11 @@

DataNormalisationComment -

- - - - + - - + + @@ -2604,10 +2388,6 @@

DataPostProcessingAnnotations

- - - - @@ -2616,6 +2396,10 @@

DataPostProcessingElucidation

+ + + + @@ -2638,10 +2422,6 @@

DataPreparationAnnotations

- - - - @@ -2650,6 +2430,10 @@

DataPreparationElucidation

+ + + + @@ -2672,14 +2456,6 @@

DataProcessingThroughCalibrationAnnotations

- - - - - - - - @@ -2688,6 +2464,10 @@

DataProcessingThroughCalibrationElucidation

+ + + + @@ -2710,14 +2490,6 @@

DataQualityAnnotations

- - - - - - - - @@ -2726,6 +2498,10 @@

DataQualityElucidation

+ + + + @@ -2752,14 +2528,6 @@

Detector

- - - - - - - - @@ -2768,6 +2536,10 @@

Detector

+ + + + @@ -2798,14 +2570,6 @@

DielectricAndImpedanceSpectroscopyAnnotations

- - - - - - - - @@ -2814,6 +2578,10 @@

DielectricAndImpedanceSpectroscopyElucidation

+ + + + @@ -2836,29 +2604,17 @@

DielectrometryAnnotations

- - - - - - - - - - - - - - - - - + + + + + @@ -2886,14 +2642,6 @@

DifferentialLinearPulseVoltammetryAnnotations

- - - - - - - - @@ -2902,6 +2650,10 @@

DifferentialLinearPulseVoltammetryElucidation

+ + + + @@ -2924,49 +2676,33 @@

DifferentialPulseVoltammetryAnnotations

- - - - - - - - - - - - - - - - - - - - + + + + - + - - + + - - + + - - + + @@ -2990,14 +2726,14 @@

DifferentialRefractiveIndexAnnotations

- - - - + + + + @@ -3020,25 +2756,21 @@

DifferentialScanningCalorimetryAnnotations

- - - - - - - - + + + + - - + + @@ -3062,14 +2794,6 @@

DifferentialStaircasePulseVoltammetryAnnotations

- - - - - - - - @@ -3078,6 +2802,10 @@

DifferentialStaircasePulseVoltammetryElucidation

+ + + + @@ -3100,25 +2828,21 @@

DifferentialThermalAnalysisAnnotations

- - - - - - - - + + + + - - + + @@ -3143,19 +2867,15 @@

DilatometryAnnotations

- - + + - - - - - - + + - + @@ -3180,6 +2900,14 @@

DirectCoulometryAtControlledCurrentAnnotations

+ + + + + + + + @@ -3196,14 +2924,6 @@

DirectCoulometryAtControlledCurrentComment

- - - - - - - - @@ -3226,6 +2946,14 @@

DirectCoulometryAtControlledPotentialAnnotations

+ + + + + + + + @@ -3242,14 +2970,6 @@

DirectCoulometryAtControlledPotentialComment

- - - - - - - - @@ -3276,14 +2996,6 @@

DirectCurrentInternalResistanceAnnotations

- - - - - - - - @@ -3292,6 +3004,14 @@

DirectCurrentInternalResistanceElucidation

+ + + + + + + + @@ -3315,24 +3035,24 @@

DynamicLightScatteringAnnotations

- - + + - - + + - - + + - + - - + + @@ -3356,14 +3076,6 @@

DynamicMechanicalAnalysisAnnotations

- - - - - - - - @@ -3372,6 +3084,14 @@

DynamicMechanicalAnalysisElucidation

+ + + + + + + + @@ -3395,24 +3115,24 @@

DynamicMechanicalSpectroscopyAnnotations

- - + + - - + + - - + + - + - - + + @@ -3436,6 +3156,18 @@

ElectrochemicalImpedanceSpectroscopyAnnotations

+ + + + + + + + + + + + @@ -3453,25 +3185,13 @@

ElectrochemicalImpedanceSpectroscopy

- - - - - - - - - - + + - - - - @@ -3494,6 +3214,14 @@

ElectrochemicalPiezoelectricMicrogravimetryAnnotations

+ + + + + + + + @@ -3506,14 +3234,6 @@

ElectrochemicalPiezoelectricMicrogravimetryComment

- - - - - - - - @@ -3540,14 +3260,6 @@

ElectrochemicalTesting

- - - - - - - - @@ -3556,6 +3268,14 @@

ElectrochemicalTestingElucidation

+ + + + + + + + @@ -3579,20 +3299,24 @@

ElectrogravimetryAnnotations

- + + + + + - + - - + + - - + + @@ -3602,10 +3326,6 @@

ElectrogravimetryIevreference

- - - - @@ -3629,24 +3349,24 @@

ElectronBackscatterDiffractionAnnotations

- - + + - - + + - - + + - + - - + + @@ -3674,14 +3394,6 @@

ElectronProbeMicroanalysisAnnotations

- - - - - - - - @@ -3690,6 +3402,14 @@

ElectronProbeMicroanalysisElucidation

+ + + + + + + + @@ -3712,14 +3432,6 @@

EllipsometryAnnotations

- - - - - - - - @@ -3728,6 +3440,14 @@

EllipsometryElucidation

+ + + + + + + + @@ -3750,22 +3470,10 @@

EnergyDispersiveXraySpectroscopyAnnotations

- - - - - - - - - - - - @@ -3775,13 +3483,25 @@

EnergyDispersiveXraySpectroscopyEDX

- - + + + + + + + + + + + + + + @@ -3804,14 +3524,6 @@

EnvironmentalScanningElectronMicroscopyAnnotations

- - - - - - - - @@ -3820,6 +3532,14 @@

EnvironmentalScanningElectronMicroscopyElucidation

+ + + + + + + + @@ -3842,14 +3562,6 @@

Exafs

- - - - - - - - @@ -3858,6 +3570,14 @@

Exafs

+ + + + + + + + @@ -3880,14 +3600,6 @@

FatigueTestingAnnotations

- - - - - - - - @@ -3896,6 +3608,14 @@

FatigueTestingElucidation

+ + + + + + + + @@ -3919,24 +3639,24 @@

FibDicAnnotations

- - + + - - + + - - + + - + - - + + @@ -3961,24 +3681,24 @@

FieldEmissionScanningElectronMicroscopyAnnotations

- - + + - - + + - - + + - + - - + + @@ -4002,34 +3722,34 @@

FourierTransformInfraredSpectroscopyAnnotations

- - - - - - - - + + + + - - + + - - + + + + + + @@ -4052,14 +3772,6 @@

FractographyAnnotations

- - - - - - - - @@ -4068,6 +3780,14 @@

FractographyElucidation

+ + + + + + + + @@ -4090,14 +3810,6 @@

FreezingPointDepressionOsmometryAnnotations

- - - - - - - - @@ -4106,6 +3818,14 @@

FreezingPointDepressionOsmometryElucidation

+ + + + + + + + @@ -4129,24 +3849,24 @@

GalvanostaticIntermittentTitrationTechniqueAnnotations

- - + + - - + + - - + + - + - - + + @@ -4174,14 +3894,6 @@

GammaSpectrometryAnnotations

- - - - - - - - @@ -4190,6 +3902,14 @@

GammaSpectrometryElucidation

+ + + + + + + + @@ -4213,15 +3933,11 @@

GasAdsorptionPorosimetryAnnotations

- - - - - - + + - + @@ -4229,8 +3945,12 @@

GasAdsorptionPorosimetryGas Adsorption Porosimetry is a method used for analyzing the surface area and porosity of materials. In this method, a gas, typically nitrogen or argon, is adsorbed onto the surface of the material at various pressures and temperatures.

- - + + + + + + @@ -4255,28 +3975,28 @@

HPPCAnnotations

- - + + - - + + - - + + - - + + - - + + @@ -4300,14 +4020,6 @@

HardnessTestingAnnotations

- - - - - - - - @@ -4316,6 +4028,14 @@

HardnessTestingElucidation

+ + + + + + + + @@ -4339,14 +4059,14 @@

HardwareManufacturer

- - - - + + + + @@ -4370,14 +4090,14 @@

HardwareModelAnnotations

- - - - + + + + @@ -4400,14 +4120,6 @@

Hazard

- - - - - - - - @@ -4416,6 +4128,14 @@

HazardElucidation

+ + + + + + + + @@ -4438,14 +4158,6 @@

Holder

- - - - - - - - @@ -4454,6 +4166,14 @@

HolderElucidation

+ + + + + + + + @@ -4476,6 +4196,14 @@

HydrodynamicVoltammetry

+ + + + + + + + @@ -4497,24 +4225,16 @@

HydrodynamicVoltammetry

- - - - - - - - - - + + - - + + @@ -4539,24 +4259,24 @@

ICI

Annotations - - + + - - + + - - + + - + - - + + @@ -4580,14 +4300,6 @@

ImpedimetryAnnotations

- - - - - - - - @@ -4596,6 +4308,14 @@

ImpedimetryElucidation

+ + + + + + + + @@ -4622,6 +4342,14 @@

InteractionVolumeAnnotations

+ + + + + + + + @@ -4642,14 +4370,6 @@

InteractionVolumeComment

- - - - - - - - @@ -4680,14 +4400,14 @@

IntermediateSampleAnnotations

- - - - + + + + @@ -4710,14 +4430,6 @@

IonChromatographyAnnotations

- - - - - - - - @@ -4726,6 +4438,14 @@

IonChromatographyElucidation

+ + + + + + + + @@ -4753,24 +4473,24 @@

IonMobilitySpectrometryAnnotations

- - + + - - + + - - + + - + - - + + @@ -4795,24 +4515,24 @@

IsothermalMicrocalorimetryAnnotations

- - + + - - + + - - + + - + - - + + @@ -4836,10 +4556,6 @@

LaboratoryAnnotations

- - - - @@ -4848,6 +4564,10 @@

LaboratoryElucidation

+ + + + @@ -4870,14 +4590,6 @@

LevelOfAutomationAnnotations

- - - - - - - - @@ -4886,6 +4598,14 @@

LevelOfAutomationElucidation

+ + + + + + + + @@ -4908,14 +4628,6 @@

LevelOfExpertiseAnnotations

- - - - - - - - @@ -4924,6 +4636,14 @@

LevelOfExpertiseElucidation

+ + + + + + + + @@ -4946,14 +4666,6 @@

LightScatteringAnnotations

- - - - - - - - @@ -4962,6 +4674,14 @@

LightScatteringElucidation

+ + + + + + + + @@ -4984,14 +4704,6 @@

LinearChronopotentiometryAnnotations

- - - - - - - - @@ -5000,6 +4712,14 @@

LinearChronopotentiometryElucidation

+ + + + + + + + @@ -5023,56 +4743,56 @@

LinearScanVoltammetryAnnotations

- - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + @@ -5096,14 +4816,6 @@

MassSpectrometryAnnotations

- - - - - - - - @@ -5112,6 +4824,14 @@

MassSpectrometryElucidation

+ + + + + + + + @@ -5134,14 +4854,6 @@

MeasurementDataPostProcessingAnnotations

- - - - - - - - @@ -5150,6 +4862,14 @@

MeasurementDataPostProcessingElucidation

+ + + + + + + + @@ -5180,14 +4900,6 @@

MeasurementParameter

- - - - - - - - @@ -5196,6 +4908,14 @@

MeasurementParameterElucidation

+ + + + + + + + @@ -5218,6 +4938,14 @@

MeasurementSystemAdjustmentAnnotations

+ + + + + + + + @@ -5231,21 +4959,13 @@

MeasurementSystemAdjustment

- - - - - - + + - - - - @@ -5268,14 +4988,6 @@

MeasurementTimeAnnotations

- - - - - - - - @@ -5284,6 +4996,14 @@

MeasurementTimeElucidation

+ + + + + + + + @@ -5306,14 +5026,6 @@

MechanicalTestingAnnotations

- - - - - - - - @@ -5322,6 +5034,14 @@

MechanicalTestingElucidation

+ + + + + + + + @@ -5348,14 +5068,6 @@

MembraneOsmometryAnnotations

- - - - - - - - @@ -5364,6 +5076,14 @@

MembraneOsmometryElucidation

+ + + + + + + + @@ -5386,14 +5106,6 @@

MercuryPorosimetryAnnotations

- - - - - - - - @@ -5402,6 +5114,14 @@

MercuryPorosimetryElucidation

+ + + + + + + + @@ -5424,14 +5144,6 @@

MicroscopyAnnotations

- - - - - - - - @@ -5440,6 +5152,14 @@

MicroscopyElucidation

+ + + + + + + + @@ -5462,14 +5182,6 @@

NanoindentationAnnotations

- - - - - - - - @@ -5478,6 +5190,14 @@

NanoindentationElucidation

+ + + + + + + + @@ -5505,24 +5225,24 @@

NeutronSpinEchoSpectroscopyAnnotations

- - + + - - + + - - + + - + - - + + @@ -5546,14 +5266,6 @@

Nexafs

- - - - - - - - @@ -5562,6 +5274,14 @@

NexafsElucidation

+ + + + + + + + @@ -5578,11 +5298,23 @@

NexafsNormalPulseVoltammetry

Irihttps://w3id.org/emmo/domain/characterisation-methodology/chameo#NormalPulseVoltammetryIrihttps://w3id.org/emmo/domain/characterisation-methodology/chameo#NormalPulseVoltammetry
Annotations
PreflabelNormalPulseVoltammetry
AltlabelNPV
AnnotationsElucidationvoltammetry in which potential pulses of amplitude increasing by a constant increment and with a pulse width of 2 to 200 ms are superimposed on a constant initial potential
CommentComment
PreflabelNormalPulseVoltammetry
Elucidationvoltammetry in which potential pulses of amplitude increasing by a constant increment and with a pulse width of 2 to 200 ms are superimposed on a constant initial potential
AltlabelNPV
Iupacreference https://doi.org/10.1515/pac-2018-0109Annotations
CommentNuclear magnetic resonance spectroscopy, most commonly known as NMR spectroscopy or magnetic resonance spectroscopy (MRS), is a spectroscopic technique to observe local magnetic fields around atomic nuclei. This spectroscopy is based on the measurement of absorption of electromagnetic radiations in the radio frequency region from roughly 4 to 900 MHz. Absorption of radio waves in the presence of magnetic field is accompanied by a special type of nuclear transition, and for this reason, such type of spectroscopy is known as Nuclear Magnetic Resonance Spectroscopy. The sample is placed in a magnetic field and the NMR signal is produced by excitation of the nuclei sample with radio waves into nuclear magnetic resonance, which is detected with sensitive radio receivers. The intramolecular magnetic field around an atom in a molecule changes the resonance frequency, thus giving access to details of the electronic structure of a molecule and its individual functional groups. As the fields are unique or highly characteristic to individual compounds, in modern organic chemistry practice, NMR spectroscopy is the definitive method to identify monomolecular organic compounds.PreflabelNuclearMagneticResonance
CommentAltlabelMagnetic resonance spectroscopy (MRS)
PreflabelNuclearMagneticResonanceAltlabelNMR
Elucidation Nuclear magnetic resonance spectroscopy, most commonly known as NMR spectroscopy or magnetic resonance spectroscopy (MRS), is a spectroscopic technique to observe local magnetic fields around atomic nuclei. This spectroscopy is based on the measurement of absorption of electromagnetic radiations in the radio frequency region from roughly 4 to 900 MHz. Absorption of radio waves in the presence of magnetic field is accompanied by a special type of nuclear transition, and for this reason, such type of spectroscopy is known as Nuclear Magnetic Resonance Spectroscopy. The sample is placed in a magnetic field and the NMR signal is produced by excitation of the nuclei sample with radio waves into nuclear magnetic resonance, which is detected with sensitive radio receivers. The intramolecular magnetic field around an atom in a molecule changes the resonance frequency, thus giving access to details of the electronic structure of a molecule and its individual functional groups. As the fields are unique or highly characteristic to individual compounds, in modern organic chemistry practice, NMR spectroscopy is the definitive method to identify monomolecular organic compounds.
AltlabelMagnetic resonance spectroscopy (MRS)CommentNuclear magnetic resonance spectroscopy, most commonly known as NMR spectroscopy or magnetic resonance spectroscopy (MRS), is a spectroscopic technique to observe local magnetic fields around atomic nuclei. This spectroscopy is based on the measurement of absorption of electromagnetic radiations in the radio frequency region from roughly 4 to 900 MHz. Absorption of radio waves in the presence of magnetic field is accompanied by a special type of nuclear transition, and for this reason, such type of spectroscopy is known as Nuclear Magnetic Resonance Spectroscopy. The sample is placed in a magnetic field and the NMR signal is produced by excitation of the nuclei sample with radio waves into nuclear magnetic resonance, which is detected with sensitive radio receivers. The intramolecular magnetic field around an atom in a molecule changes the resonance frequency, thus giving access to details of the electronic structure of a molecule and its individual functional groups. As the fields are unique or highly characteristic to individual compounds, in modern organic chemistry practice, NMR spectroscopy is the definitive method to identify monomolecular organic compounds.
AltlabelNMRComment
LabelAnnotations
Commenta process in which the electric current is kept constant at 0 (i.e., open-circuit conditions)PreflabelOpenCircuitHold
CommentAltlabelOCVHold
PreflabelOpenCircuitHoldElucidationa process in which the electric current is kept constant at 0 (i.e., open-circuit conditions)
ElucidationComment a process in which the electric current is kept constant at 0 (i.e., open-circuit conditions)
AltlabelOCVHoldComment
Label
Annotations
CommentThe human operator who takes care of the whole characterisation method or sub-processes/stages.
Comment
Preflabel OperatorElucidation The human operator who takes care of the whole characterisation method or sub-processes/stages.
CommentThe human operator who takes care of the whole characterisation method or sub-processes/stages.
Comment
Label Operator
Annotations
CommentOptical microscopy is a technique used to closely view a sample through the magnification of a lens with visible light
Comment
Preflabel OpticalMicroscopyElucidation Optical microscopy is a technique used to closely view a sample through the magnification of a lens with visible light
CommentOptical microscopy is a technique used to closely view a sample through the magnification of a lens with visible light
Comment
Label OpticalMicroscopy
Annotations
Comment
Preflabel OpticalTesting
Comment
Label OpticalTesting
Annotations
CommentOsmometry is an advanced analytical method for determining the osmotic concentration of solutions. The osmotic – or solute – concentration of a colloidal system is expressed in osmoles (Osm) per unit of volume (Osm/L) or weight (Osm/kg).
Comment
Preflabel OsmometryElucidation Osmometry is an advanced analytical method for determining the osmotic concentration of solutions. The osmotic – or solute – concentration of a colloidal system is expressed in osmoles (Osm) per unit of volume (Osm/L) or weight (Osm/kg).
CommentOsmometry is an advanced analytical method for determining the osmotic concentration of solutions. The osmotic – or solute – concentration of a colloidal system is expressed in osmoles (Osm) per unit of volume (Osm/L) or weight (Osm/kg).
Comment
Label Osmometry
Annotations
CommentPhotoluminescence spectroscopy is a widely used technique for characterisation of the optical and electronic properties of semiconductors and molecules.
Comment
Preflabel PhotoluminescenceMicroscopyElucidation Photoluminescence spectroscopy is a widely used technique for characterisation of the optical and electronic properties of semiconductors and molecules.
CommentPhotoluminescence spectroscopy is a widely used technique for characterisation of the optical and electronic properties of semiconductors and molecules.
Comment
Label PhotoluminescenceMicroscopy
Annotations
CommentSet of physics principles (and associated governing equations) that describes the interaction between the sample and the probe.
Comment
Preflabel PhysicsOfInteractionElucidation Set of physics principles (and associated governing equations) that describes the interaction between the sample and the probe.
CommentSet of physics principles (and associated governing equations) that describes the interaction between the sample and the probe.
Comment
Example In x-ray diffraction, this is represented by the set of physics equations that describe the relation between the incident x-ray beam and the diffracted beam (the most simple form for this being the Bragg’s law).
Annotations
Comment
Preflabel Porosimetry
Comment
Label PorosimetryAnnotations
CommentThe PostProcessingModel use is mainly intended to get secondary data from primary data.PreflabelPostProcessingModel
CommentElucidation Mathematical model used to process data.
CommentMathematical model used to process data.
PreflabelPostProcessingModelCommentThe PostProcessingModel use is mainly intended to get secondary data from primary data.
ElucidationMathematical model used to process data.Comment
Label
Annotations
PreflabelPotentiometricStrippingAnalysis
AltlabelPSA
Elucidationtwo-step electrochemical measurement in which 1) material is accumulated at an electrode and 2) the material is removed by chemical reaction or electrochemically at constant current with measurement of electrode potential
Comment historically for the analysis of metal ions, mercury ions were added to the test solution to form a mercury amalgam when reduced. Alternatively, an HMDE or MFE was used and the oxidizing agent added after amalgam formation. However, the toxicity of mercury and its compounds have all but precluded the present-day use of mercuryComment
PreflabelPotentiometricStrippingAnalysis
Elucidationtwo-step electrochemical measurement in which 1) material is accumulated at an electrode and 2) the material is removed by chemical reaction or electrochemically at constant current with measurement of electrode potential
AltlabelPSA
Label PotentiometricStrippingAnalysis
Annotations
PreflabelPotentiometry
ElucidationPotentiometric methods are used to measure the electrochemical potentials of a metallic structure in a given environment.
Comment For measurements using ion-selective electrodes, the measurement is made under equi- librium conditions what means that the macroscopic electric current is zero and the con- centrations of all species are uniform throughout the solution. The indicator electrode is in direct contact with the analyte solution, whereas the reference electrode is usually separated from the analyte solution by a salt bridge. The potential difference between the indicator and reference electrodes is normally directly proportional to the logarithm of the activity (concentration) of the analyte in the solution (Nernst equation). See also ion selec- tive electrode.
PreflabelPotentiometry
ElucidationPotentiometric methods are used to measure the electrochemical potentials of a metallic structure in a given environment.Wikidatareferencehttps://www.wikidata.org/wiki/Q900632
Iupacreference https://doi.org/10.1515/pac-2018-0109
Wikidatareferencehttps://www.wikidata.org/wiki/Q900632
Ievreference https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-04-12
Annotations
CommentThe sample after a preparation process.
Comment
Preflabel PreparedSampleElucidation The sample after a preparation process.
CommentThe sample after a preparation process.
Comment
Label PreparedSample
Annotations
CommentData resulting of a pre-processing of raw data, applying corrections to normalize/harmonize, in order to prepare them for the post-processing.
Comment
Preflabel PrimaryDataElucidation Data resulting of a pre-processing of raw data, applying corrections to normalize/harmonize, in order to prepare them for the post-processing.
CommentData resulting of a pre-processing of raw data, applying corrections to normalize/harmonize, in order to prepare them for the post-processing.
Comment
Example Baseline subtraction
Annotations
CommentProbe is the physical tool (i.e., a disturbance, primary solicitation, or a gadget), controlled over time, that generates measurable fields that interact with the sample to acquire information on the specimen’s behaviour and properties.
Comment
Preflabel ProbeElucidation Probe is the physical tool (i.e., a disturbance, primary solicitation, or a gadget), controlled over time, that generates measurable fields that interact with the sample to acquire information on the specimen’s behaviour and properties.
CommentProbe is the physical tool (i.e., a disturbance, primary solicitation, or a gadget), controlled over time, that generates measurable fields that interact with the sample to acquire information on the specimen’s behaviour and properties.
Comment
Example In dynamic light scattering, temporal fluctuations of backscattered light due to Brownian motion and flow of nanoparticles are the probe, resolved as function of pathlength in the sample. From fluctuation analysis (intensity correlations) and the wavelength of light in the medium, the (distribution of) diffusion coefficient(s) can be measured during flow. The Stokes-Einstein relation yields the particle size characteristics.
Annotations
CommentProcess representing the interaction between the Probe and the Sample (with a certain Interaction Volume) which generates a Signal
Comment
Preflabel ProbeSampleInteractionElucidation Process representing the interaction between the Probe and the Sample (with a certain Interaction Volume) which generates a Signal
CommentProcess representing the interaction between the Probe and the Sample (with a certain Interaction Volume) which generates a Signal
Comment
Label ProbeSampleInteraction
Annotations
CommentDescription of performed statistical analysis to check for data reproducibility (e.g. easily reproducible for everyone, reproducible for a domain expert, reproducible only for Data processing Expert)
Comment
Preflabel ProcessingReproducibilityElucidation Description of performed statistical analysis to check for data reproducibility (e.g. easily reproducible for everyone, reproducible for a domain expert, reproducible only for Data processing Expert)
CommentDescription of performed statistical analysis to check for data reproducibility (e.g. easily reproducible for everyone, reproducible for a domain expert, reproducible only for Data processing Expert)
Comment
Label ProcessingReproducibility
Annotations
CommentProfilometry is a technique used to extract topographical data from a surface. This can be a single point, a line scan or even a full three dimensional scan. The purpose of profilometry is to get surface morphology, step heights and surface roughness.
Comment
Preflabel ProfilometryElucidation Profilometry is a technique used to extract topographical data from a surface. This can be a single point, a line scan or even a full three dimensional scan. The purpose of profilometry is to get surface morphology, step heights and surface roughness.
CommentProfilometry is a technique used to extract topographical data from a surface. This can be a single point, a line scan or even a full three dimensional scan. The purpose of profilometry is to get surface morphology, step heights and surface roughness.
Comment
Label ProfilometryAnnotations
Commenta technique used to measure the voltage of a cell under a low applied current as an estimate for the open-circuit voltagePreflabelPseudoOpenCircuitVoltageMethod
CommentAltlabelPseudoOCV
PreflabelPseudoOpenCircuitVoltageMethodElucidationa technique used to measure the voltage of a cell under a low applied current as an estimate for the open-circuit voltage
ElucidationComment a technique used to measure the voltage of a cell under a low applied current as an estimate for the open-circuit voltage
AltlabelPseudoOCVComment
Label
Annotations
CommentThe pulsed electroacoustic (PEA) method is an established method for space charge measurements in polymeric dielectrics.
Comment
Preflabel PulsedElectroacousticMethodElucidation The pulsed electroacoustic (PEA) method is an established method for space charge measurements in polymeric dielectrics.
CommentThe pulsed electroacoustic (PEA) method is an established method for space charge measurements in polymeric dielectrics.
Comment
Iupacreference https://doi.org/10.1007/s10832-023-00332-y
Annotations
CommentRaman spectroscopy (/ˈrɑːmən/) (named after physicist C. V. Raman) is a spectroscopic technique typically used to determine vibrational modes of molecules, although rotational and other low-frequency modes of systems may also be observed. Raman spectroscopy is commonly used in chemistry to provide a structural fingerprint by which molecules can be identified.

Raman spectroscopy relies upon inelastic scattering of photons, known as Raman scattering. A source of monochromatic light, usually from a laser in the visible, near infrared, or near ultraviolet range is used, although X-rays can also be used. The laser light interacts with molecular vibrations, phonons or other excitations in the system, resulting in the energy of the laser photons being shifted up or down. The shift in energy gives information about the vibrational modes in the system. Infrared spectroscopy typically yields similar yet complementary information.

Typically, a sample is illuminated with a laser beam. Electromagnetic radiation from the illuminated spot is collected with a lens and sent through a monochromator. Elastic scattered radiation at the wavelength corresponding to the laser line (Rayleigh scattering) is filtered out by either a notch filter, edge pass filter, or a band pass filter, while the rest of the collected light is dispersed onto a detector.
Comment
Preflabel RamanSpectroscopyElucidation Raman spectroscopy (/ˈrɑːmən/) (named after physicist C. V. Raman) is a spectroscopic technique typically used to determine vibrational modes of molecules, although rotational and other low-frequency modes of systems may also be observed. Raman spectroscopy is commonly used in chemistry to provide a structural fingerprint by which molecules can be identified.

Raman spectroscopy relies upon inelastic scattering of photons, known as Raman scattering. A source of monochromatic light, usually from a laser in the visible, near infrared, or near ultraviolet range is used, although X-rays can also be used. The laser light interacts with molecular vibrations, phonons or other excitations in the system, resulting in the energy of the laser photons being shifted up or down. The shift in energy gives information about the vibrational modes in the system. Infrared spectroscopy typically yields similar yet complementary information.

Typically, a sample is illuminated with a laser beam. Electromagnetic radiation from the illuminated spot is collected with a lens and sent through a monochromator. Elastic scattered radiation at the wavelength corresponding to the laser line (Rayleigh scattering) is filtered out by either a notch filter, edge pass filter, or a band pass filter, while the rest of the collected light is dispersed onto a detector.
CommentRaman spectroscopy (/ˈrɑːmən/) (named after physicist C. V. Raman) is a spectroscopic technique typically used to determine vibrational modes of molecules, although rotational and other low-frequency modes of systems may also be observed. Raman spectroscopy is commonly used in chemistry to provide a structural fingerprint by which molecules can be identified.

Raman spectroscopy relies upon inelastic scattering of photons, known as Raman scattering. A source of monochromatic light, usually from a laser in the visible, near infrared, or near ultraviolet range is used, although X-rays can also be used. The laser light interacts with molecular vibrations, phonons or other excitations in the system, resulting in the energy of the laser photons being shifted up or down. The shift in energy gives information about the vibrational modes in the system. Infrared spectroscopy typically yields similar yet complementary information.

Typically, a sample is illuminated with a laser beam. Electromagnetic radiation from the illuminated spot is collected with a lens and sent through a monochromator. Elastic scattered radiation at the wavelength corresponding to the laser line (Rayleigh scattering) is filtered out by either a notch filter, edge pass filter, or a band pass filter, while the rest of the collected light is dispersed onto a detector.
Comment
Label RamanSpectroscopy
Annotations
CommentA set of reasons or a logical basis for a decision or belief
Preflabel RationaleElucidation A set of reasons or a logical basis for a decision or belief
CommentA set of reasons or a logical basis for a decision or belief
Label RationaleAnnotations
CommentIn some cases, raw data can be considered to have already some level of data processing, e.g., in electron microscopy a “raw image” that is formed on the screen is already result from multiple processing after the signal is acquired by the detector.PreflabelRawData
CommentElucidation Direct output of the equipment with the manufacturer’s software including automatic pre-processing that is not modified by the user once the acquisition method is defined and the equipment calibrated.
CommentIn some cases, raw data can be considered to have already some level of data processing, e.g., in electron microscopy a “raw image” that is formed on the screen is already result from multiple processing after the signal is acquired by the detector.ElucidationThe raw data is a set of (unprocessed) data that is given directly as output from the detector, usually expressed as a function of time or position, or photon energy.
CommentIn some cases, raw data can be considered to have already some level of data processing, e.g., in electron microscopy a “raw image” that is formed on the screen is already result from multiple processing after the signal is acquired by the detector.
PreflabelRawDataCommentDirect output of the equipment with the manufacturer’s software including automatic pre-processing that is not modified by the user once the acquisition method is defined and the equipment calibrated.
ElucidationDirect output of the equipment with the manufacturer’s software including automatic pre-processing that is not modified by the user once the acquisition method is defined and the equipment calibrated.CommentIn some cases, raw data can be considered to have already some level of data processing, e.g., in electron microscopy a “raw image” that is formed on the screen is already result from multiple processing after the signal is acquired by the detector.
ElucidationThe raw data is a set of (unprocessed) data that is given directly as output from the detector, usually expressed as a function of time or position, or photon energy.Comment
Example
Annotations
Comment
Preflabel RawSample
Comment
Label RawSampleAnnotations
CommentMaterial, sufficiently homogeneous and stable with reference to one or more specified properties, which has been established to be fit for its intended use in measurement or in examination
NOTE 1 Reference materials can be certified reference materials or reference materials without a certified property
value.
NOTE 2 For a reference material to be used as a measurement standard for calibration purposes it needs to be a certified reference material.
NOTE 3 Reference materials can be used for measurement precision evaluation and quality control.
EXAMPLE Human serum without an assigned quantity value for the amount-of-substance concentration of the inherent cholesterol, used for quality control.
NOTE 4 Properties of reference materials can be quantities or nominal properties.
NOTE 5 A reference material is sometimes incorporated into a specially fabricated device.
EXAMPLE Spheres of uniform size mounted on a microscope slide.
NOTE 6 Some reference materials have assigned values in a unit outside the SI. Such materials include vaccines to
which International Units (IU) have been assigned by the World Health Organization.
NOTE 7 A given reference material can only be used for one purpose in a measurement, either calibration or quality
control, but not both.
NOTE 8 ISO/REMCO has an analogous definition but uses the term “measurement process” (ISO Guide 30, Reference
materials – Selected terms and definitions, definition 2.1.1) for both measurement and examination.

-- International Vocabulary of Metrology(VIM)		PreflabelReferenceSample
CommentMaterial, sufficiently homogeneous and stable with respect to one or more specified properties, which has been established to be fit for its intended use in a measurement process”.AltlabelCertified Reference Material
CommentAltlabelReference material
PreflabelReferenceSampleAltlabelReferenceSpecimen
Elucidation Material, sufficiently homogeneous and stable with respect to one or more specified properties, which has been established to be fit for its intended use in a measurement process”.
VimtermReference material
AltlabelCertified Reference MaterialCommentMaterial, sufficiently homogeneous and stable with reference to one or more specified properties, which has been established to be fit for its intended use in measurement or in examination
NOTE 1 Reference materials can be certified reference materials or reference materials without a certified property
value.
NOTE 2 For a reference material to be used as a measurement standard for calibration purposes it needs to be a certified reference material.
NOTE 3 Reference materials can be used for measurement precision evaluation and quality control.
EXAMPLE Human serum without an assigned quantity value for the amount-of-substance concentration of the inherent cholesterol, used for quality control.
NOTE 4 Properties of reference materials can be quantities or nominal properties.
NOTE 5 A reference material is sometimes incorporated into a specially fabricated device.
EXAMPLE Spheres of uniform size mounted on a microscope slide.
NOTE 6 Some reference materials have assigned values in a unit outside the SI. Such materials include vaccines to
which International Units (IU) have been assigned by the World Health Organization.
NOTE 7 A given reference material can only be used for one purpose in a measurement, either calibration or quality
control, but not both.
NOTE 8 ISO/REMCO has an analogous definition but uses the term “measurement process” (ISO Guide 30, Reference
materials – Selected terms and definitions, definition 2.1.1) for both measurement and examination.

-- International Vocabulary of Metrology(VIM)
AltlabelReference materialCommentMaterial, sufficiently homogeneous and stable with respect to one or more specified properties, which has been established to be fit for its intended use in a measurement process”.
AltlabelReferenceSpecimenComment
DefinitionDefinition Quality control sample used to determine accuracy and precision of method. [ISO 17858:2007]
VimtermReference material
Label ReferenceSampleAnnotations
CommentSample and Specime are often used interchangeably. However in some cases the term Specimen is used to specify a portion taken under conditions such that the sampling variability cannot be assessed (usually because the population is changing), and is assumed, for convenience, to be zero.PreflabelSample
CommentPortion of material selected from a larger quantity of material. The term needs to be qualified, e.g., bulk sample, representative sample, primary sample, bulked sample, test sample, etc. The term 'sample' implies the existence of a sampling error, i.e., the results obtained on the portions taken are only estimates of the concentration of a constituent or the quantity of a property present in the parent material. If there is no or negligible sampling error, the portion removed is a test portion, aliquot, or specimen.AltlabelSpecimen
CommentElucidationPortion of material selected from a larger quantity of material. The term needs to be qualified, e.g., bulk sample, representative sample, primary sample, bulked sample, test sample, etc. The term 'sample' implies the existence of a sampling error, i.e., the results obtained on the portions taken are only estimates of the concentration of a constituent or the quantity of a property present in the parent material. If there is no or negligible sampling error, the portion removed is a test portion, aliquot, or specimen.
Comment Sample and Specime are often used interchangeably. However in some cases the term Specimen is used to specify a portion taken under conditions such that the sampling variability cannot be assessed (usually because the population is changing), and is assumed, for convenience, to be zero.
PreflabelSampleCommentPortion of material selected from a larger quantity of material. The term needs to be qualified, e.g., bulk sample, representative sample, primary sample, bulked sample, test sample, etc. The term 'sample' implies the existence of a sampling error, i.e., the results obtained on the portions taken are only estimates of the concentration of a constituent or the quantity of a property present in the parent material. If there is no or negligible sampling error, the portion removed is a test portion, aliquot, or specimen.
ElucidationPortion of material selected from a larger quantity of material. The term needs to be qualified, e.g., bulk sample, representative sample, primary sample, bulked sample, test sample, etc. The term 'sample' implies the existence of a sampling error, i.e., the results obtained on the portions taken are only estimates of the concentration of a constituent or the quantity of a property present in the parent material. If there is no or negligible sampling error, the portion removed is a test portion, aliquot, or specimen.Comment
AltlabelSpecimenCommentSample and Specime are often used interchangeably. However in some cases the term Specimen is used to specify a portion taken under conditions such that the sampling variability cannot be assessed (usually because the population is changing), and is assumed, for convenience, to be zero.
Label
Annotations
CommentAnalysis of the sample in order to determine information that are relevant for the characterisation method.
Comment
Preflabel SampleInspectionElucidation Analysis of the sample in order to determine information that are relevant for the characterisation method.
CommentAnalysis of the sample in order to determine information that are relevant for the characterisation method.
Comment
Example In the Nanoindentation method the Scanning Electron Microscope to determine the indentation area.
Annotations
Comment
Preflabel SampleInspectionInstrument
Comment
Label SampleInspectionInstrument
Annotations
CommentParameter used for the sample inspection process
Comment
Preflabel SampleInspectionParameterElucidation Parameter used for the sample inspection process
CommentParameter used for the sample inspection process
Comment
Label SampleInspectionParameterIri https://w3id.org/emmo/domain/characterisation-methodology/chameo#SamplePreparation
Annotations
CommentSample preparation processes (e.g., machining, polishing, cutting to size, etc.) before actual observation and measurement.
Comment
Annotations
PreflabelElucidation Sample preparation processes (e.g., machining, polishing, cutting to size, etc.) before actual observation and measurement.
CommentSample preparation processes (e.g., machining, polishing, cutting to size, etc.) before actual observation and measurement.
Comment
Label SamplePreparation
Annotations
Comment
Preflabel SamplePreparationInstrument
Comment
Label SamplePreparationInstrument
Annotations
CommentParameter used for the sample preparation process
Comment
Preflabel SamplePreparationParameterElucidation Parameter used for the sample preparation process
CommentParameter used for the sample preparation process
Comment
Label SamplePreparationParameterAnnotations
CommentDC polarography with current sampling at the end of each drop life mechanically enforced by a knocker at a preset drop time value. The current sampling and mechanical drop dislodge are synchronized.PreflabelSampledDCPolarography
CommentIn this way, the ratio of faradaic current to double layer charging current is enhanced and the negative influence of charging current is partially eliminated. Due to the improved signal (faradaic current) to noise (charging current) ratio, the limit of detection is lowered.AltlabelTASTPolarography
CommentElucidationDC polarography with current sampling at the end of each drop life mechanically enforced by a knocker at a preset drop time value. The current sampling and mechanical drop dislodge are synchronized.
PreflabelSampledDCPolarographyCommentDC polarography with current sampling at the end of each drop life mechanically enforced by a knocker at a preset drop time value. The current sampling and mechanical drop dislodge are synchronized.
ElucidationDC polarography with current sampling at the end of each drop life mechanically enforced by a knocker at a preset drop time value. The current sampling and mechanical drop dislodge are synchronized.CommentIn this way, the ratio of faradaic current to double layer charging current is enhanced and the negative influence of charging current is partially eliminated. Due to the improved signal (faradaic current) to noise (charging current) ratio, the limit of detection is lowered.
AltlabelTASTPolarographyComment
IupacreferenceAnnotations
CommentThe term can be used to cover either a unit of supply or a portion for analysis. The portion taken may consist of one or more sub-samples and the batch may be the population from which the sample is taken.PreflabelSamplingProcess
CommentElucidation Act of extracting a portion (amount) of material from a larger quantity of material. This operation results in obtaining a sample representative of the batch with respect to the property or properties being investigated.
CommentAct of extracting a portion (amount) of material from a larger quantity of material. This operation results in obtaining a sample representative of the batch with respect to the property or properties being investigated.
PreflabelSamplingProcessCommentThe term can be used to cover either a unit of supply or a portion for analysis. The portion taken may consist of one or more sub-samples and the batch may be the population from which the sample is taken.
ElucidationAct of extracting a portion (amount) of material from a larger quantity of material. This operation results in obtaining a sample representative of the batch with respect to the property or properties being investigated.Comment
LabelAnnotations
CommentAuger electron spectroscopy (AES or simply Auger) is a surface analysis technique that uses an electron beam to excite electrons on atoms in the particle. Atoms that are excited by the electron beam can emit “Auger” electrons. AES measures the kinetic energies of the emitted electrons. The energy of the emitted electrons is characteristic of elements present at the surface and near the surface of a sample.PreflabelScanningAugerElectronMicroscopy
CommentAltlabelAES
PreflabelScanningAugerElectronMicroscopyElucidationAuger electron spectroscopy (AES or simply Auger) is a surface analysis technique that uses an electron beam to excite electrons on atoms in the particle. Atoms that are excited by the electron beam can emit “Auger” electrons. AES measures the kinetic energies of the emitted electrons. The energy of the emitted electrons is characteristic of elements present at the surface and near the surface of a sample.
ElucidationComment Auger electron spectroscopy (AES or simply Auger) is a surface analysis technique that uses an electron beam to excite electrons on atoms in the particle. Atoms that are excited by the electron beam can emit “Auger” electrons. AES measures the kinetic energies of the emitted electrons. The energy of the emitted electrons is characteristic of elements present at the surface and near the surface of a sample.
AltlabelAESComment
LabelAnnotations
CommentThe scanning electron microscope (SEM) uses a focused beam of high-energy electrons to generate a variety of signals at the surface of solid specimens. The signals that derive from electron-sample interactions reveal information about the sample including external morphology (texture), chemical composition, and crystalline structure and orientation of materials making up the sample.PreflabelScanningElectronMicroscopy
CommentAltlabelSEM
PreflabelScanningElectronMicroscopyElucidationThe scanning electron microscope (SEM) uses a focused beam of high-energy electrons to generate a variety of signals at the surface of solid specimens. The signals that derive from electron-sample interactions reveal information about the sample including external morphology (texture), chemical composition, and crystalline structure and orientation of materials making up the sample.
ElucidationComment The scanning electron microscope (SEM) uses a focused beam of high-energy electrons to generate a variety of signals at the surface of solid specimens. The signals that derive from electron-sample interactions reveal information about the sample including external morphology (texture), chemical composition, and crystalline structure and orientation of materials making up the sample.
AltlabelSEMComment
LabelAnnotations
CommentScanning Kelvin probe (SKP) and scanning Kelvin probe force microscopy (SKPFM) are probe techniques which permit mapping of topography and Volta potential distribution on electrode surfaces. It measures the surface electrical potential of a sample without requiring an actual physical contact.PreflabelScanningKelvinProbe
CommentAltlabelSKB
PreflabelScanningKelvinProbeElucidationScanning Kelvin probe (SKP) and scanning Kelvin probe force microscopy (SKPFM) are probe techniques which permit mapping of topography and Volta potential distribution on electrode surfaces. It measures the surface electrical potential of a sample without requiring an actual physical contact.
ElucidationComment Scanning Kelvin probe (SKP) and scanning Kelvin probe force microscopy (SKPFM) are probe techniques which permit mapping of topography and Volta potential distribution on electrode surfaces. It measures the surface electrical potential of a sample without requiring an actual physical contact.
AltlabelSKBComment
Label
Annotations
CommentScanning probe microscopy (SPM) is a branch of microscopy that forms images of surfaces using a physical probe that scans the specimen.
Comment
Preflabel ScanningProbeMicroscopyElucidation Scanning probe microscopy (SPM) is a branch of microscopy that forms images of surfaces using a physical probe that scans the specimen.
CommentScanning probe microscopy (SPM) is a branch of microscopy that forms images of surfaces using a physical probe that scans the specimen.
Comment
Label ScanningProbeMicroscopyAnnotations
CommentScanning Tunneling Microscopy, or STM, is an imaging technique used to obtain ultra-high resolution images at the atomic scale, without using light or electron beams.PreflabelScanningTunnelingMicroscopy
CommentAltlabelSTM
PreflabelScanningTunnelingMicroscopyElucidationScanning Tunneling Microscopy, or STM, is an imaging technique used to obtain ultra-high resolution images at the atomic scale, without using light or electron beams.
ElucidationComment Scanning Tunneling Microscopy, or STM, is an imaging technique used to obtain ultra-high resolution images at the atomic scale, without using light or electron beams.
AltlabelSTMComment
Label
Annotations
Comment
Preflabel ScatteringAndDiffraction
Comment
Label ScatteringAndDiffractionAnnotations
CommentData resulting from the application of post-processing or model generation to other data.PreflabelSecondaryData
CommentAltlabelElaborated data
PreflabelSecondaryDataElucidationData resulting from the application of post-processing or model generation to other data.
ElucidationComment Data resulting from the application of post-processing or model generation to other data.
AltlabelElaborated dataComment
ExampleAnnotations
CommentSecondary-ion mass spectrometry (SIMS) is a technique used to analyze the composition of solid surfaces and thin films by sputtering the surface of the specimen with a focused primary ion beam and collecting and analyzing ejected secondary ions.PreflabelSecondaryIonMassSpectrometry
CommentAltlabelSIMS
PreflabelSecondaryIonMassSpectrometryElucidationSecondary-ion mass spectrometry (SIMS) is a technique used to analyze the composition of solid surfaces and thin films by sputtering the surface of the specimen with a focused primary ion beam and collecting and analyzing ejected secondary ions.
ElucidationComment Secondary-ion mass spectrometry (SIMS) is a technique used to analyze the composition of solid surfaces and thin films by sputtering the surface of the specimen with a focused primary ion beam and collecting and analyzing ejected secondary ions.
AltlabelSIMSComment
Label
Annotations
Comment
Preflabel ShearOrTorsionTesting
Comment
Label ShearOrTorsionTesting
Annotations
PreflabelSignal
ElucidationResult (effect) of the interaction between the sample and the probe, which usually is a measurable and quantifiable quantity.
Comment Signal is usually emitted from a characteristic “emission” volume, which can be different from the sample/probe “interaction” volume and can be usually quantified using proper physics equations and/or modelling of the interaction mechanisms.Comment
PreflabelSignal
ElucidationResult (effect) of the interaction between the sample and the probe, which usually is a measurable and quantifiable quantity.
Definition According to UPAC Compendium of Chemical Terminology, a “signal” is “A representation of a quantity within an analytical instrument” (https://goldbook.iupac.org/terms/view/S05661 ).
Annotations
CommentSpectroscopic techniques are numerous and varied, but all involve measuring the response of a material to different frequencies of electromagnetic radiation. Depending on the technique used, material characterization may be based on the absorption, emission, impedance, or reflection of incident energy by a sample.
Comment
Preflabel SpectrometryElucidation Spectroscopic techniques are numerous and varied, but all involve measuring the response of a material to different frequencies of electromagnetic radiation. Depending on the technique used, material characterization may be based on the absorption, emission, impedance, or reflection of incident energy by a sample.
CommentSpectroscopic techniques are numerous and varied, but all involve measuring the response of a material to different frequencies of electromagnetic radiation. Depending on the technique used, material characterization may be based on the absorption, emission, impedance, or reflection of incident energy by a sample.
Comment
Label SpectrometryIri https://w3id.org/emmo/domain/characterisation-methodology/chameo#Spectroscopy
Annotations
CommentSpectroscopy is a category of characterization techniques which use a range of principles to reveal the chemical composition, composition variation, crystal structure and photoelectric properties of materials.
Comment
Annotations
PreflabelElucidation Spectroscopy is a category of characterization techniques which use a range of principles to reveal the chemical composition, composition variation, crystal structure and photoelectric properties of materials.
CommentSpectroscopy is a category of characterization techniques which use a range of principles to reveal the chemical composition, composition variation, crystal structure and photoelectric properties of materials.
Comment
Label SpectroscopyAnnotations
CommentMost instruments show plots of the current at the end of the forward-going pulse and of the backward-going pulse vs. the potential, as well as their difference. This can give valuable information on the kinetics of the electrode reaction and the electrode process.PreflabelSquareWaveVoltammetry
CommentThe current is sampled just before the end of the forward- going pulse and of the backward-going pulse and the difference of the two sampled currents is plotted versus the applied potential of the potential or staircase ramp. The square-wave voltammogram is peak-shapedAltlabelOSWV
CommentThe sensitivity of SWV depends on the reversibility of the electrode reaction of the analyte.AltlabelOsteryoungSquareWaveVoltammetry
Commentvoltammetry in which a square-wave potential waveform is superimposed on an underlying linearly varying potential ramp or staircase rampAltlabelSWV
CommentElucidationvoltammetry in which a square-wave potential waveform is superimposed on an underlying linearly varying potential ramp or staircase ramp
PreflabelSquareWaveVoltammetryCommentMost instruments show plots of the current at the end of the forward-going pulse and of the backward-going pulse vs. the potential, as well as their difference. This can give valuable information on the kinetics of the electrode reaction and the electrode process.
Elucidationvoltammetry in which a square-wave potential waveform is superimposed on an underlying linearly varying potential ramp or staircase rampCommentThe current is sampled just before the end of the forward- going pulse and of the backward-going pulse and the difference of the two sampled currents is plotted versus the applied potential of the potential or staircase ramp. The square-wave voltammogram is peak-shaped
AltlabelOSWVCommentThe sensitivity of SWV depends on the reversibility of the electrode reaction of the analyte.
AltlabelOsteryoungSquareWaveVoltammetryCommentvoltammetry in which a square-wave potential waveform is superimposed on an underlying linearly varying potential ramp or staircase ramp
AltlabelSWVComment
Iupacreferencehttps://doi.org/10.1515/pac-2018-0109Wikipediareferencehttps://en.wikipedia.org/wiki/Squarewave_voltammetry
Wikidatareference https://www.wikidata.org/wiki/Q4016323
Wikipediareferencehttps://en.wikipedia.org/wiki/Squarewave_voltammetryIupacreferencehttps://doi.org/10.1515/pac-2018-0109
Label
Annotations
Commentchronopotentiometry where the applied current is changed in steps
Comment
Preflabel StepChronopotentiometryElucidation chronopotentiometry where the applied current is changed in steps
Commentchronopotentiometry where the applied current is changed in steps
Comment
Label StepChronopotentiometry
Annotations
PreflabelStrippingVoltammetry
Elucidationtwo-step electrochemical measurement in which 1) material is accumulated at an electrode and 2) the amount of an accumulated species is measured by voltammetry. The measured electric current in step 2 is related to the concentration of analyte in the solution by calibration.
Comment Anodic stripping voltammetry (ASV) was historically used to measure concentrations of metal ions in solution using cathodic accumulation with mercury to form an amalgam. Due to the toxicity of mercury and its compounds, inductively coupled plasma optical emission spectrometry and inductively coupled plasma mass spectrometry have frequently replaced ASV at mercury electrodes in the laboratory, often sacrificing the probing of speciation and lability in complex matrices. Mercury has now been replaced by non-toxic bismuth or anti- mony as films on a solid electrode support (such as glassy carbon) with equally good sensi- tivity and detection limits.
PreflabelStrippingVoltammetry
Elucidationtwo-step electrochemical measurement in which 1) material is accumulated at an electrode and 2) the amount of an accumulated species is measured by voltammetry. The measured electric current in step 2 is related to the concentration of analyte in the solution by calibration.Wikipediareferencehttps://en.wikipedia.org/wiki/Electrochemical_stripping_analysis
Iupacreference https://doi.org/10.1515/pac-2018-0109
Wikipediareferencehttps://en.wikipedia.org/wiki/Electrochemical_stripping_analysis
Label StrippingVoltammetry
Annotations
Comment
Preflabel Synchrotron
Comment
Label SynchrotronAnnotations
CommentTensile testing, also known as tension testing, is a test in which a sample is subjected to a controlled tension until failure. Properties that are directly measured via a tensile test are ultimate tensile strength, breaking strength, maximum elongation and reduction in area. From these measurements the following properties can also be determined: Young's modulus, Poisson's ratio, yield strength, and strain-hardening characteristics. Uniaxial tensile testing is the most commonly used for obtaining the mechanical characteristics of isotropic materials. Some materials use biaxial tensile testing. The main difference between these testing machines being how load is applied on the materials.PreflabelTensileTesting
CommentAltlabelTensionTest
PreflabelTensileTestingElucidationTensile testing, also known as tension testing, is a test in which a sample is subjected to a controlled tension until failure. Properties that are directly measured via a tensile test are ultimate tensile strength, breaking strength, maximum elongation and reduction in area. From these measurements the following properties can also be determined: Young's modulus, Poisson's ratio, yield strength, and strain-hardening characteristics. Uniaxial tensile testing is the most commonly used for obtaining the mechanical characteristics of isotropic materials. Some materials use biaxial tensile testing. The main difference between these testing machines being how load is applied on the materials.
ElucidationComment Tensile testing, also known as tension testing, is a test in which a sample is subjected to a controlled tension until failure. Properties that are directly measured via a tensile test are ultimate tensile strength, breaking strength, maximum elongation and reduction in area. From these measurements the following properties can also be determined: Young's modulus, Poisson's ratio, yield strength, and strain-hardening characteristics. Uniaxial tensile testing is the most commonly used for obtaining the mechanical characteristics of isotropic materials. Some materials use biaxial tensile testing. The main difference between these testing machines being how load is applied on the materials.
AltlabelTensionTestComment
LabelAnnotations
CommentThermomechanical analysis (TMA) is a technique used in thermal analysis, a branch of materials science which studies the properties of materials as they change with temperature.PreflabelThermochemicalTesting
CommentAltlabelTMA
PreflabelThermochemicalTestingElucidationThermomechanical analysis (TMA) is a technique used in thermal analysis, a branch of materials science which studies the properties of materials as they change with temperature.
ElucidationComment Thermomechanical analysis (TMA) is a technique used in thermal analysis, a branch of materials science which studies the properties of materials as they change with temperature.
AltlabelTMAComment
LabelAnnotations
CommentThermogravimetric analysis or thermal gravimetric analysis (TGA) is a method of thermal analysis in which the mass of a sample is measured over time as the temperature changes. This measurement provides information about physical phenomena, such as phase transitions, absorption, adsorption and desorption; as well as chemical phenomena including chemisorptions, thermal decomposition, and solid-gas reactions (e.g., oxidation or reduction).PreflabelThermogravimetry
CommentAltlabelTGA
PreflabelThermogravimetryElucidationThermogravimetric analysis or thermal gravimetric analysis (TGA) is a method of thermal analysis in which the mass of a sample is measured over time as the temperature changes. This measurement provides information about physical phenomena, such as phase transitions, absorption, adsorption and desorption; as well as chemical phenomena including chemisorptions, thermal decomposition, and solid-gas reactions (e.g., oxidation or reduction).
ElucidationComment Thermogravimetric analysis or thermal gravimetric analysis (TGA) is a method of thermal analysis in which the mass of a sample is measured over time as the temperature changes. This measurement provides information about physical phenomena, such as phase transitions, absorption, adsorption and desorption; as well as chemical phenomena including chemisorptions, thermal decomposition, and solid-gas reactions (e.g., oxidation or reduction).
AltlabelTGAComment
Label
Annotations
CommentMethod of mechanical testing that provides values for the modulus of elasticity in bending, flexural stress, flexural strain, and the flexural stress–strain response of a material sample
Comment
Preflabel ThreePointBendingTesting
AltlabelThreePointFlexuralTest
Elucidation Method of mechanical testing that provides values for the modulus of elasticity in bending, flexural stress, flexural strain, and the flexural stress–strain response of a material sample
AltlabelThreePointFlexuralTestCommentMethod of mechanical testing that provides values for the modulus of elasticity in bending, flexural stress, flexural strain, and the flexural stress–strain response of a material sample
Wikidatareferencehttps://www.wikidata.org/wiki/Q2300905Comment
Wikipediareference https://en.wikipedia.org/wiki/Three-point_flexural_test
Wikidatareferencehttps://www.wikidata.org/wiki/Q2300905
Label ThreePointBendingTesting
Annotations
CommentTomography is imaging by sections or sectioning that uses any kind of penetrating wave. The method is used in radiology, archaeology, biology, atmospheric science, geophysics, oceanography, plasma physics, materials science, cosmochemistry, astrophysics, quantum information, and other areas of science. The word tomography is derived from Ancient Greek τόμος tomos, "slice, section" and γράφω graphō, "to write" or, in this context as well, "to describe." A device used in tomography is called a tomograph, while the image produced is a tomogram.
Preflabel TomographyElucidation Tomography is imaging by sections or sectioning that uses any kind of penetrating wave. The method is used in radiology, archaeology, biology, atmospheric science, geophysics, oceanography, plasma physics, materials science, cosmochemistry, astrophysics, quantum information, and other areas of science. The word tomography is derived from Ancient Greek τόμος tomos, "slice, section" and γράφω graphō, "to write" or, in this context as well, "to describe." A device used in tomography is called a tomograph, while the image produced is a tomogram.
CommentTomography is imaging by sections or sectioning that uses any kind of penetrating wave. The method is used in radiology, archaeology, biology, atmospheric science, geophysics, oceanography, plasma physics, materials science, cosmochemistry, astrophysics, quantum information, and other areas of science. The word tomography is derived from Ancient Greek τόμος tomos, "slice, section" and γράφω graphō, "to write" or, in this context as well, "to describe." A device used in tomography is called a tomograph, while the image produced is a tomogram.
Label TomographyAnnotations
CommentTransmission electron microscopy (TEM) is a microscopy technique in which a beam of electrons is transmitted through a specimen to form an image. The specimen is most often an ultrathin section less than 100 nm thick or a suspension on a grid. An image is formed from the interaction of the electrons with the sample as the beam is transmitted through the specimen. The image is then magnified and focused onto an imaging device, such as a fluorescent screen, a layer of photographic film, or a sensor such as a scintillator attached to a charge-coupled device.PreflabelTransmissionElectronMicroscopy
CommentAltlabelTEM
PreflabelTransmissionElectronMicroscopyElucidationTransmission electron microscopy (TEM) is a microscopy technique in which a beam of electrons is transmitted through a specimen to form an image. The specimen is most often an ultrathin section less than 100 nm thick or a suspension on a grid. An image is formed from the interaction of the electrons with the sample as the beam is transmitted through the specimen. The image is then magnified and focused onto an imaging device, such as a fluorescent screen, a layer of photographic film, or a sensor such as a scintillator attached to a charge-coupled device.
ElucidationComment Transmission electron microscopy (TEM) is a microscopy technique in which a beam of electrons is transmitted through a specimen to form an image. The specimen is most often an ultrathin section less than 100 nm thick or a suspension on a grid. An image is formed from the interaction of the electrons with the sample as the beam is transmitted through the specimen. The image is then magnified and focused onto an imaging device, such as a fluorescent screen, a layer of photographic film, or a sensor such as a scintillator attached to a charge-coupled device.
AltlabelTEMComment
Label
Annotations
CommentUltrasonic testing (UT) is a family of non-destructive testing techniques based on the propagation of ultrasonic waves in the object or material tested. In most common UT applications, very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz, and occasionally up to 50 MHz, are transmitted into materials to detect internal flaws or to characterize materials. A common example is ultrasonic thickness measurement, which tests the thickness of the test object, for example, to monitor pipework corrosion. Ultrasonic testing is often performed on steel and other metals and alloys, though it can also be used on concrete, wood and composites, albeit with less resolution. It is used in many industries including steel and aluminium construction, metallurgy, manufacturing, aerospace, automotive and other transportation sectors.
Preflabel UltrasonicTestingElucidation Ultrasonic testing (UT) is a family of non-destructive testing techniques based on the propagation of ultrasonic waves in the object or material tested. In most common UT applications, very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz, and occasionally up to 50 MHz, are transmitted into materials to detect internal flaws or to characterize materials. A common example is ultrasonic thickness measurement, which tests the thickness of the test object, for example, to monitor pipework corrosion. Ultrasonic testing is often performed on steel and other metals and alloys, though it can also be used on concrete, wood and composites, albeit with less resolution. It is used in many industries including steel and aluminium construction, metallurgy, manufacturing, aerospace, automotive and other transportation sectors.
CommentUltrasonic testing (UT) is a family of non-destructive testing techniques based on the propagation of ultrasonic waves in the object or material tested. In most common UT applications, very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz, and occasionally up to 50 MHz, are transmitted into materials to detect internal flaws or to characterize materials. A common example is ultrasonic thickness measurement, which tests the thickness of the test object, for example, to monitor pipework corrosion. Ultrasonic testing is often performed on steel and other metals and alloys, though it can also be used on concrete, wood and composites, albeit with less resolution. It is used in many industries including steel and aluminium construction, metallurgy, manufacturing, aerospace, automotive and other transportation sectors.
Label UltrasonicTesting
Annotations
CommentHigh level description of the user case. It can include the properties of the material, the conditions of the environment and possibly mentioning which are the industrial sectors of reference.
Preflabel UserCaseElucidation High level description of the user case. It can include the properties of the material, the conditions of the environment and possibly mentioning which are the industrial sectors of reference.
CommentHigh level description of the user case. It can include the properties of the material, the conditions of the environment and possibly mentioning which are the industrial sectors of reference.
Label UserCaseAnnotations
CommentVapor pressure osmometry measures vapor pressure indirectly by measuring the change in temperature of a polymer solution on dilution by solvent vapor and is generally useful for polymers with Mn below 10,000–40,000 g/mol. When molecular weight is more than that limit, the quantity being measured becomes very small to detect.PreflabelVaporPressureDepressionOsmometry
CommentAltlabelVPO
PreflabelVaporPressureDepressionOsmometryElucidationVapor pressure osmometry measures vapor pressure indirectly by measuring the change in temperature of a polymer solution on dilution by solvent vapor and is generally useful for polymers with Mn below 10,000–40,000 g/mol. When molecular weight is more than that limit, the quantity being measured becomes very small to detect.
ElucidationComment Vapor pressure osmometry measures vapor pressure indirectly by measuring the change in temperature of a polymer solution on dilution by solvent vapor and is generally useful for polymers with Mn below 10,000–40,000 g/mol. When molecular weight is more than that limit, the quantity being measured becomes very small to detect.
AltlabelVPOComment
LabelAnnotations
CommentViscometry or viscosity method was one of the first methods used for determining the MW of polymers. In this method, the viscosity of polymer solution is measured, and the simplest method used is capillary viscometry by using the Ubbelohde U-tube viscometer. In this method, both the flow time of the polymer solution (t) and the flow time of the pure solvent (t0) are recorded. The ratio of the polymer solution flow time (t) to the flow time of pure solvent (t0) is equal to the ratio of their viscosities (η/η0) only if they have the same densities.PreflabelViscometry
CommentAltlabelViscosity
PreflabelViscometryElucidationViscometry or viscosity method was one of the first methods used for determining the MW of polymers. In this method, the viscosity of polymer solution is measured, and the simplest method used is capillary viscometry by using the Ubbelohde U-tube viscometer. In this method, both the flow time of the polymer solution (t) and the flow time of the pure solvent (t0) are recorded. The ratio of the polymer solution flow time (t) to the flow time of pure solvent (t0) is equal to the ratio of their viscosities (η/η0) only if they have the same densities.
ElucidationComment Viscometry or viscosity method was one of the first methods used for determining the MW of polymers. In this method, the viscosity of polymer solution is measured, and the simplest method used is capillary viscometry by using the Ubbelohde U-tube viscometer. In this method, both the flow time of the polymer solution (t) and the flow time of the pure solvent (t0) are recorded. The ratio of the polymer solution flow time (t) to the flow time of pure solvent (t0) is equal to the ratio of their viscosities (η/η0) only if they have the same densities.
AltlabelViscosityComment
Label
Annotations
PreflabelVoltammetry
ElucidationVoltammetry is an analytical technique based on the measure of the current flowing through an electrode dipped in a solution containing electro-active compounds, while a potential scanning is imposed upon it.
Comment The current vs. potential (I-E) curve is called a voltammogram.
PreflabelVoltammetryWikipediareferencehttps://en.wikipedia.org/wiki/Voltammetry
ElucidationVoltammetry is an analytical technique based on the measure of the current flowing through an electrode dipped in a solution containing electro-active compounds, while a potential scanning is imposed upon it.Wikidatareferencehttps://www.wikidata.org/wiki/Q904093
Iupacreference https://doi.org/10.1515/pac-2018-0109
Wikidatareferencehttps://www.wikidata.org/wiki/Q904093
Ievreference https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-04-11
Wikipediareferencehttps://en.wikipedia.org/wiki/Voltammetry
Label Voltammetry
Annotations
CommentHydrodynamic voltammetry using a a rotating disc electrode, where the limiting current is described by the Levich equation
Preflabel VoltammetryAtARotatingDiskElectrodeElucidation Hydrodynamic voltammetry using a a rotating disc electrode, where the limiting current is described by the Levich equation
CommentHydrodynamic voltammetry using a a rotating disc electrode, where the limiting current is described by the Levich equation
Iupacreference https://doi.org/10.1515/pac-2018-0109
Annotations
CommentA wear test measures the changes in conditions caused by friction, and the result is obtained from deformation, scratches, and indentations on the interacting surfaces. Wear is defined as the progressive removal of the material from a solid surface and manifested by a change in the geometry of the surface.
Preflabel WearTestingElucidation A wear test measures the changes in conditions caused by friction, and the result is obtained from deformation, scratches, and indentations on the interacting surfaces. Wear is defined as the progressive removal of the material from a solid surface and manifested by a change in the geometry of the surface.
CommentA wear test measures the changes in conditions caused by friction, and the result is obtained from deformation, scratches, and indentations on the interacting surfaces. Wear is defined as the progressive removal of the material from a solid surface and manifested by a change in the geometry of the surface.
Label WearTesting
Annotations
CommentX-ray photoelectron spectroscopy (XPS), also known as ESCA (electron spectroscopy for chemical analysis) is a surface analysis technique which provides both elemental and chemical state information virtually without restriction on the type of material which can be analysed. It is a relatively simple technique where the sample is illuminated with X-rays which have enough energy to eject an electron from the atom. These ejected electrons are known as photoelectrons. The kinetic energy of these emitted electrons is characteristic of the element from which the photoelectron originated. The position and intensity of the peaks in an energy spectrum provide the desired chemical state and quantitative information. The surface sensitivity of XPS is determined by the distance that that photoelectron can travel through the material without losing any kinteic energy. These elastiaclly scattered photoelectrons contribute to the photoelectron peak, whilst photoelectrons that have been inelastically scattered, losing some kinetic energy before leaving the material, will contribute to the spectral background.
Preflabel XpsVariableKinetic
ElucidationX-ray photoelectron spectroscopy (XPS), also known as ESCA (electron spectroscopy for chemical analysis) is a surface analysis technique which provides both elemental and chemical state information virtually without restriction on the type of material which can be analysed. It is a relatively simple technique where the sample is illuminated with X-rays which have enough energy to eject an electron from the atom. These ejected electrons are known as photoelectrons. The kinetic energy of these emitted electrons is characteristic of the element from which the photoelectron originated. The position and intensity of the peaks in an energy spectrum provide the desired chemical state and quantitative information. The surface sensitivity of XPS is determined by the distance that that photoelectron can travel through the material without losing any kinteic energy. These elastiaclly scattered photoelectrons contribute to the photoelectron peak, whilst photoelectrons that have been inelastically scattered, losing some kinetic energy before leaving the material, will contribute to the spectral background.
Altlabel Electron spectroscopy for chemical analysis (ESCA)Altlabel X-ray photoelectron spectroscopy (XPS)
ElucidationX-ray photoelectron spectroscopy (XPS), also known as ESCA (electron spectroscopy for chemical analysis) is a surface analysis technique which provides both elemental and chemical state information virtually without restriction on the type of material which can be analysed. It is a relatively simple technique where the sample is illuminated with X-rays which have enough energy to eject an electron from the atom. These ejected electrons are known as photoelectrons. The kinetic energy of these emitted electrons is characteristic of the element from which the photoelectron originated. The position and intensity of the peaks in an energy spectrum provide the desired chemical state and quantitative information. The surface sensitivity of XPS is determined by the distance that that photoelectron can travel through the material without losing any kinteic energy. These elastiaclly scattered photoelectrons contribute to the photoelectron peak, whilst photoelectrons that have been inelastically scattered, losing some kinetic energy before leaving the material, will contribute to the spectral background.
CommentX-ray photoelectron spectroscopy (XPS), also known as ESCA (electron spectroscopy for chemical analysis) is a surface analysis technique which provides both elemental and chemical state information virtually without restriction on the type of material which can be analysed. It is a relatively simple technique where the sample is illuminated with X-rays which have enough energy to eject an electron from the atom. These ejected electrons are known as photoelectrons. The kinetic energy of these emitted electrons is characteristic of the element from which the photoelectron originated. The position and intensity of the peaks in an energy spectrum provide the desired chemical state and quantitative information. The surface sensitivity of XPS is determined by the distance that that photoelectron can travel through the material without losing any kinteic energy. These elastiaclly scattered photoelectrons contribute to the photoelectron peak, whilst photoelectrons that have been inelastically scattered, losing some kinetic energy before leaving the material, will contribute to the spectral background.
Label XpsVariableKinetic
Annotations
Commenta technique used to analyze the atomic and molecular structure of crystalline materials by observing the diffraction patterns produced when X-rays interact with the regular array of atoms in the crystal lattice
Comment
Preflabel XrayDiffraction
AltlabelXRD
Elucidation a technique used to analyze the atomic and molecular structure of crystalline materials by observing the diffraction patterns produced when X-rays interact with the regular array of atoms in the crystal lattice
AltlabelXRDCommenta technique used to analyze the atomic and molecular structure of crystalline materials by observing the diffraction patterns produced when X-rays interact with the regular array of atoms in the crystal lattice
Wikidatareferencehttps://www.wikidata.org/wiki/Q12101244Comment
Wikipediareference https://en.wikipedia.org/wiki/X-ray_crystallography
Wikidatareferencehttps://www.wikidata.org/wiki/Q12101244
Label XrayDiffractionAnnotations
Commenta method for analyzing the crystal structure of powdered materials by measuring the diffraction patterns produced when X-rays interact with randomly oriented crystallites within the samplePreflabelXrayPowderDiffraction
CommentAltlabelXRPD
PreflabelXrayPowderDiffractionElucidationa method for analyzing the crystal structure of powdered materials by measuring the diffraction patterns produced when X-rays interact with randomly oriented crystallites within the sample
ElucidationComment a method for analyzing the crystal structure of powdered materials by measuring the diffraction patterns produced when X-rays interact with randomly oriented crystallites within the sample
AltlabelXRPDComment
Wikipediareference
Annotations
Comment
Preflabel XrdGrazingIncidence
Comment
Label XrdGrazingIncidence
Annotations
Comment
Preflabel hasAccessConditions
Comment
Label hasAccessConditions
Annotations
Comment
Preflabel hasBeginCharacterisationTaskAltlabel hasBeginCharacterizationTask
Comment
Label hasBeginCharacterisationTask
Annotations
Comment
Preflabel hasCharacterisationComponentAltlabel hasCharacterizationComponent
Comment
Label hasCharacterisationComponent
Annotations
Comment
Preflabel hasCharacterisationEnvironmentAltlabel hasCharacterizationEnvironment
Comment
Label hasCharacterisationEnvironment
Annotations
Comment
Preflabel hasCharacterisationEnvironmentPropertyAltlabel hasCharacterizationEnvironmentProperty
Comment
Label hasCharacterisationEnvironmentProperty
Annotations
Comment
Preflabel hasCharacterisationInputAltlabel hasCharacterizationInput
Comment
Label hasCharacterisationInput
Annotations
Comment
Preflabel hasCharacterisationMeasurementInstrumentAltlabel hasCharacterizationMeasurementInstrument
Comment
Label hasCharacterisationMeasurementInstrument
Annotations
Comment
Preflabel hasCharacterisationOutputAltlabel hasCharacterizationOutput
Comment
Label hasCharacterisationOutput
Annotations
Comment
Preflabel hasCharacterisationProcedureValidation
Comment
Label hasCharacterisationProcedureValidation
Annotations
Comment
Preflabel hasCharacterisationPropertyAltlabel hasCharacterizationProperty
Comment
Label hasCharacterisationProperty
Annotations
Comment
Preflabel hasCharacterisationSoftwareAltlabel hasCharacterizationSoftware
Comment
Label hasCharacterisationSoftware
Annotations
Comment
Preflabel hasCharacterisationTaskAltlabel hasCharacterizationTask
Comment
Label hasCharacterisationTask
Annotations
Comment
Preflabel hasDataAcquisitionRate
Comment
Label hasDataAcquisitionRate
Annotations
Comment
Preflabel hasDataProcessingThroughCalibration
Comment
Label hasDataProcessingThroughCalibration
Annotations
Comment
Preflabel hasDataQuality
Comment
Label hasDataQuality
Annotations
Comment
Preflabel hasDataset
Comment
Label hasDataset
Annotations
Comment
Preflabel hasDateOfCalibration
Comment
Label hasDateOfCalibration
Annotations
Comment
Preflabel hasEndCharacterisationTaskAltlabel hasEndCharacterizationTask
Comment
Label hasEndCharacterisationTask
Annotations
Comment
Preflabel hasHardwareSpecification
Comment
Label hasHardwareSpecification
Annotations
Comment
Preflabel hasHazard
Comment
Label hasHazard
Annotations
Comment
Preflabel hasHolder
Comment
Label hasHolder
Annotations
Comment
Preflabel hasInstrumentForCalibration
Comment
Label hasInstrumentForCalibration
Annotations
Comment
Preflabel hasInteractionVolume
Comment
Label hasInteractionVolume
Annotations
Comment
Preflabel hasInteractionWithProbe
Comment
Label hasInteractionWithProbe
Annotations
Comment
Preflabel hasInteractionWithSample
Comment
Label hasInteractionWithSample
Annotations
Comment
Preflabel hasLab
Comment
Label hasLab
Annotations
Comment
Preflabel hasLevelOfAutomation
Comment
Label hasLevelOfAutomation
Annotations
CommentA string representing the Manufacturer of a CharacterisationHardware
Preflabel hasManufacturerElucidation A string representing the Manufacturer of a CharacterisationHardware
CommentA string representing the Manufacturer of a CharacterisationHardware
Label hasManufacturer
Annotations
Comment
Preflabel hasMeasurementDetector
Comment
Label hasMeasurementDetector
Annotations
Comment
Preflabel hasMeasurementParameter
Comment
Label hasMeasurementParameter
Annotations
Comment
Preflabel hasMeasurementProbe
Comment
Label hasMeasurementProbe
Annotations
Comment
Preflabel hasMeasurementSample
Comment
Label hasMeasurementSample
Annotations
Comment
Preflabel hasMeasurementTime
Comment
Label hasMeasurementTime
Annotations
CommentA string representing the model of a CharacterisationHardware
Preflabel hasModelElucidation A string representing the model of a CharacterisationHardware
CommentA string representing the model of a CharacterisationHardware
Label hasModel
Annotations
Comment
Preflabel hasOperator
Comment
Label hasOperator
Annotations
Comment
Preflabel hasPeerReviewedArticle
Comment
Label hasPeerReviewedArticle
Annotations
Comment
Preflabel hasPhysicsOfInteraction
Comment
Label hasPhysicsOfInteraction
Annotations
Comment
Preflabel hasPostProcessingModel
Comment
Label hasPostProcessingModel
Annotations
Comment
Preflabel hasProcessingReproducibility
Comment
Label hasProcessingReproducibility
Annotations
Comment
Preflabel hasReferenceSample
Comment
Label hasReferenceSample
Annotations
Comment
Preflabel hasSampleBeforeSamplePreparation
Comment
Label hasSampleBeforeSamplePreparation
Annotations
Comment
Preflabel hasSampleForInspection
Comment
Label hasSampleForInspection
Annotations
Comment
Preflabel hasSampleInspectionInstrument
Comment
Label hasSampleInspectionInstrument
Annotations
Comment
Preflabel hasSampleInspectionParameter
Comment
Label hasSampleInspectionParameter
Annotations
Comment
Preflabel hasSamplePreparationInstrument
Comment
Label hasSamplePreparationInstrument
Annotations
Comment
Preflabel hasSamplePreparationParameter
Comment
Label hasSamplePreparationParameter
Annotations
Comment
Preflabel hasSampledSample
Comment
Label hasSampledSample
Annotations
CommentA string representing the UniqueID of a CharacterisationHardware
Preflabel hasUniqueIDElucidation A string representing the UniqueID of a CharacterisationHardware
CommentA string representing the UniqueID of a CharacterisationHardware
Label hasUniqueID
Annotations
Comment
Preflabel requiresLevelOfExpertise
Comment
Label requiresLevelOfExpertise
Annotations
CommentUsed to correlate a user case to a characterisation procedure
Preflabel userCaseHasCharacterisationProcedure
AltlabeluserCaseHasCharacterizationProcedure
Elucidation Used to correlate a user case to a characterisation procedure
AltlabeluserCaseHasCharacterizationProcedureCommentUsed to correlate a user case to a characterisation procedure
Label
CommentThe resulting alternating current is plotted versus imposed DC potential. The obtained AC voltammogram is peak-shaped.PreflabelACVoltammetry
CommentAltlabelACV
Elucidation voltammetry in which a sinusoidal alternating potential of small amplitude (10 to 50 mV) of constant frequency (10 Hz to 100 kHz) is superimposed on a slowly and linearly varying potential ramp
CommentThe resulting alternating current is plotted versus imposed DC potential. The obtained AC voltammogram is peak-shaped.
PreflabelACVoltammetryCommentvoltammetry in which a sinusoidal alternating potential of small amplitude (10 to 50 mV) of constant frequency (10 Hz to 100 kHz) is superimposed on a slowly and linearly varying potential ramp
Elucidationvoltammetry in which a sinusoidal alternating potential of small amplitude (10 to 50 mV) of constant frequency (10 Hz to 100 kHz) is superimposed on a slowly and linearly varying potential rampComment
AltlabelACVWikidatareferencehttps://www.wikidata.org/wiki/Q120895154
Iupacreference https://doi.org/10.1515/pac-2018-0109
Wikidatareferencehttps://www.wikidata.org/wiki/Q120895154
Label ACVoltammetry
Commentelectrochemical method where traces of solid particles are abrasively transferred onto the surface of an electrode, followed by an electrochemical dissolution (anodic or cathodic dissolution) that is recorded as a current–voltage curve
Comment
Preflabel AbrasiveStrippingVoltammetryelectrochemical method where traces of solid particles are abrasively transferred onto the surface of an electrode, followed by an electrochemical dissolution (anodic or cathodic dissolution) that is recorded as a current–voltage curve
Commentelectrochemical method where traces of solid particles are abrasively transferred onto the surface of an electrode, followed by an electrochemical dissolution (anodic or cathodic dissolution) that is recorded as a current–voltage curve
Comment
Label AbrasiveStrippingVoltammetry
CommentDescribes what is needed to repeat the experiment
Preflabel AccessConditionsDescribes what is needed to repeat the experiment
CommentDescribes what is needed to repeat the experiment
Example In case of national or international facilities such as synchrotrons describe the programme that enabled you to access these. Was the access to your characterisation tool an inhouse routine or required a 3rd party service? Was the access to your sample preparation an inhouse routine or required a 3rd party service?
CommentA peak-shaped adsorptive stripping voltammogram is obtained. Peak current depends on time of accumulation, mass transport of analyte (stirring), scan rate and mode (linear or pulse), and analyte concentration in solution. AdSV is usually employed for analysis of organic compounds or metal complexes with organic ligands. Stripping is done by means of an anodic or a cathodic voltammetric scan (linear or pulse), during which the adsorbed compound is oxidized or reduced.
CommentStripping voltammetry involving pre-concentration by adsorption of the analyte (in contrast to electro-chemical accumulation).
Preflabel AdsorptiveStrippingVoltammetry
AltlabelAdSV
Elucidation Stripping voltammetry involving pre-concentration by adsorption of the analyte (in contrast to electro-chemical accumulation).
AltlabelAdSVCommentA peak-shaped adsorptive stripping voltammogram is obtained. Peak current depends on time of accumulation, mass transport of analyte (stirring), scan rate and mode (linear or pulse), and analyte concentration in solution. AdSV is usually employed for analysis of organic compounds or metal complexes with organic ligands. Stripping is done by means of an anodic or a cathodic voltammetric scan (linear or pulse), during which the adsorbed compound is oxidized or reduced.
CommentStripping voltammetry involving pre-concentration by adsorption of the analyte (in contrast to electro-chemical accumulation).
Iupacreference
CommentAlpha spectrometry (also known as alpha(-particle) spectroscopy) is the quantitative study of the energy of alpha particles emitted by a radioactive nuclide that is an alpha emitter. As emitted alpha particles are mono-energetic (i.e. not emitted with a spectrum of energies, such as beta decay) with energies often distinct to the decay they can be used to identify which radionuclide they originated from.
Preflabel AlphaSpectrometryAlpha spectrometry (also known as alpha(-particle) spectroscopy) is the quantitative study of the energy of alpha particles emitted by a radioactive nuclide that is an alpha emitter. As emitted alpha particles are mono-energetic (i.e. not emitted with a spectrum of energies, such as beta decay) with energies often distinct to the decay they can be used to identify which radionuclide they originated from.
CommentAlpha spectrometry (also known as alpha(-particle) spectroscopy) is the quantitative study of the energy of alpha particles emitted by a radioactive nuclide that is an alpha emitter. As emitted alpha particles are mono-energetic (i.e. not emitted with a spectrum of energies, such as beta decay) with energies often distinct to the decay they can be used to identify which radionuclide they originated from.
Label AlphaSpectrometry
CommentAmperometry can be distinguished from voltammetry by the parameter being controlled (electrode potential E) and the parameter being measured (electrode current I which is usually a function of time – see chronoamperometry).
CommentIn a non-stirred solution, a diffusion-limited current is usually measured, which is propor-tional to the concentration of an electroactive analyte.PreflabelAmperometry
CommentElucidation The amperometric method provides the ability to distinguish selectively between a number of electroactive species in solution by judicious selection of the applied potential and/or choice of electrode material.
CommentThe current is usually faradaic and the applied potential is usually constant.Amperometry can be distinguished from voltammetry by the parameter being controlled (electrode potential E) and the parameter being measured (electrode current I which is usually a function of time – see chronoamperometry). In a non-stirred solution, a diffusion-limited current is usually measured, which is propor-tional to the concentration of an electroactive analyte. The current is usually faradaic and the applied potential is usually constant. The integral of current with time is the electric charge, which may be related to the amount of substance reacted by Faraday’s laws of electrolysis.
CommentThe integral of current with time is the electric charge, which may be related to the amount of substance reacted by Faraday’s laws of electrolysis.
Comment
PreflabelAmperometry
Elucidation The amperometric method provides the ability to distinguish selectively between a number of electroactive species in solution by judicious selection of the applied potential and/or choice of electrode material.
CommentAnalytical electron microscopy (AEM) refers to the collection of spectroscopic data in TEM or STEM, enabling qualitative or quantitative compositional analysis.
Comment
Preflabel AnalyticalElectronMicroscopyAnalytical electron microscopy (AEM) refers to the collection of spectroscopic data in TEM or STEM, enabling qualitative or quantitative compositional analysis.
CommentAnalytical electron microscopy (AEM) refers to the collection of spectroscopic data in TEM or STEM, enabling qualitative or quantitative compositional analysis.
Label AnalyticalElectronMicroscopy
CommentA peak-shaped anodic stripping voltammogram is obtained. Peak current depends on time of accumulation, mass transport of analyte (stirring), scan rate and mode (linear or pulse), and analyte concentration in solution.
CommentA solid electrode, carbon paste or composite electrode, bismuth film electrode, mercury film electrode, or static mercury drop electrode may be used.
CommentStripping voltammetry in which material accumulated at the working electrode is electrochemically oxi- dized in the stripping step.
Comment
Preflabel AnodicStrippingVoltammetry
ElucidationStripping voltammetry in which material accumulated at the working electrode is electrochemically oxi- dized in the stripping step.Stripping voltammetry in which material accumulated at the working electrode is electrochemically oxi- dized in the stripping step. A peak-shaped anodic stripping voltammogram is obtained. Peak current depends on time of accumulation, mass transport of analyte (stirring), scan rate and mode (linear or pulse), and analyte concentration in solution. A solid electrode, carbon paste or composite electrode, bismuth film electrode, mercury film electrode, or static mercury drop electrode may be used.
Iupacreferencehttps://doi.org/10.1515/pac-2018-0109CommentStripping voltammetry in which material accumulated at the working electrode is electrochemically oxi- dized in the stripping step. A peak-shaped anodic stripping voltammogram is obtained. Peak current depends on time of accumulation, mass transport of analyte (stirring), scan rate and mode (linear or pulse), and analyte concentration in solution. A solid electrode, carbon paste or composite electrode, bismuth film electrode, mercury film electrode, or static mercury drop electrode may be used.
Wikidatareference https://www.wikidata.org/wiki/Q939328
Iupacreferencehttps://doi.org/10.1515/pac-2018-0109
Label AnodicStrippingVoltammetry
CommentAtom Probe Tomography (APT or 3D Atom Probe) is the only material analysis technique offering extensive capabilities for both 3D imaging and chemical composition measurements at the atomic scale (around 0.1-0.3nm resolution in depth and 0.3-0.5nm laterally). Since its early developments, Atom Probe Tomography has contributed to major advances in materials science. The sample is prepared in the form of a very sharp tip. The cooled tip is biased at high DC voltage (3-15 kV). The very small radius of the tip and the High Voltage induce a very high electrostatic field (tens V/nm) at the tip surface, just below the point of atom evaporation. Under laser or HV pulsing, one or more atoms are evaporated from the surface, by field effect (near 100% ionization), and projected onto a Position Sensitive Detector (PSD) with a very high detection efficiency. Ion efficiencies are as high as 80%, the highest analytical efficiency of any 3D microscopy.
Preflabel AtomProbeTomography
ElucidationAtom Probe Tomography (APT or 3D Atom Probe) is the only material analysis technique offering extensive capabilities for both 3D imaging and chemical composition measurements at the atomic scale (around 0.1-0.3nm resolution in depth and 0.3-0.5nm laterally). Since its early developments, Atom Probe Tomography has contributed to major advances in materials science. The sample is prepared in the form of a very sharp tip. The cooled tip is biased at high DC voltage (3-15 kV). The very small radius of the tip and the High Voltage induce a very high electrostatic field (tens V/nm) at the tip surface, just below the point of atom evaporation. Under laser or HV pulsing, one or more atoms are evaporated from the surface, by field effect (near 100% ionization), and projected onto a Position Sensitive Detector (PSD) with a very high detection efficiency. Ion efficiencies are as high as 80%, the highest analytical efficiency of any 3D microscopy.
Altlabel 3D Atom ProbeAPT
ElucidationAtom Probe Tomography (APT or 3D Atom Probe) is the only material analysis technique offering extensive capabilities for both 3D imaging and chemical composition measurements at the atomic scale (around 0.1-0.3nm resolution in depth and 0.3-0.5nm laterally). Since its early developments, Atom Probe Tomography has contributed to major advances in materials science. The sample is prepared in the form of a very sharp tip. The cooled tip is biased at high DC voltage (3-15 kV). The very small radius of the tip and the High Voltage induce a very high electrostatic field (tens V/nm) at the tip surface, just below the point of atom evaporation. Under laser or HV pulsing, one or more atoms are evaporated from the surface, by field effect (near 100% ionization), and projected onto a Position Sensitive Detector (PSD) with a very high detection efficiency. Ion efficiencies are as high as 80%, the highest analytical efficiency of any 3D microscopy.
CommentAtom Probe Tomography (APT or 3D Atom Probe) is the only material analysis technique offering extensive capabilities for both 3D imaging and chemical composition measurements at the atomic scale (around 0.1-0.3nm resolution in depth and 0.3-0.5nm laterally). Since its early developments, Atom Probe Tomography has contributed to major advances in materials science. The sample is prepared in the form of a very sharp tip. The cooled tip is biased at high DC voltage (3-15 kV). The very small radius of the tip and the High Voltage induce a very high electrostatic field (tens V/nm) at the tip surface, just below the point of atom evaporation. Under laser or HV pulsing, one or more atoms are evaporated from the surface, by field effect (near 100% ionization), and projected onto a Position Sensitive Detector (PSD) with a very high detection efficiency. Ion efficiencies are as high as 80%, the highest analytical efficiency of any 3D microscopy.
Label AtomProbeTomographyAnnotations
CommentAtomic force microscopy (AFM) is an influential surface analysis technique used for micro/nanostructured coatings. This flexible technique can be used to obtain high-resolution nanoscale images and study local sites in air (conventional AFM) or liquid (electrochemical AFM) surroundings.
Preflabel AtomicForceMicroscopyAtomic force microscopy (AFM) is an influential surface analysis technique used for micro/nanostructured coatings. This flexible technique can be used to obtain high-resolution nanoscale images and study local sites in air (conventional AFM) or liquid (electrochemical AFM) surroundings.
CommentAtomic force microscopy (AFM) is an influential surface analysis technique used for micro/nanostructured coatings. This flexible technique can be used to obtain high-resolution nanoscale images and study local sites in air (conventional AFM) or liquid (electrochemical AFM) surroundings.
Label AtomicForceMicroscopy
CommentA technique used to measure the specific surface area of porous materials by analyzing the adsorption of gas molecules onto the material's surface
Preflabel BrunauerEmmettTellerMethod
ElucidationA technique used to measure the specific surface area of porous materials by analyzing the adsorption of gas molecules onto the material's surface
Altlabel BET
Wikidatareferencehttps://www.wikidata.org/wiki/Q795838ElucidationA technique used to measure the specific surface area of porous materials by analyzing the adsorption of gas molecules onto the material's surface
CommentA technique used to measure the specific surface area of porous materials by analyzing the adsorption of gas molecules onto the material's surface
Wikipediareference https://en.wikipedia.org/wiki/BET_theory
Wikidatareferencehttps://www.wikidata.org/wiki/Q795838
Label BrunauerEmmettTellerMethod
CommentCalibration data are used to provide correction of measured data or perform uncertainty calculations. They are generally the result of a measuerement on a reference specimen.
Preflabel CalibrationDataCalibration data are used to provide correction of measured data or perform uncertainty calculations. They are generally the result of a measuerement on a reference specimen.
CommentCalibration data are used to provide correction of measured data or perform uncertainty calculations. They are generally the result of a measuerement on a reference specimen.
Label CalibrationData
CommentPost-processing of the output of the calibration in order to get the actual calibration data to be used as input for the measurement.
Preflabel CalibrationDataPostProcessingPost-processing of the output of the calibration in order to get the actual calibration data to be used as input for the measurement.
CommentPost-processing of the output of the calibration in order to get the actual calibration data to be used as input for the measurement.
Label CalibrationDataPostProcessing
PreflabelCalibrationProcess
ElucidationSequence of operations/actions that are needed to convert the initial signal (as produced by the detector) into a meaningful and useable raw data.
Comment Usually the calibration process involve a reference sample (with pre-defined, specific, and stable physical characteristics and known properties), in order to extract calibration data. In this way, the accuracy of the measurement tool and its components (for example the probe) will be evaluated and confirmed.
PreflabelCalibrationProcess
ElucidationSequence of operations/actions that are needed to convert the initial signal (as produced by the detector) into a meaningful and useable raw data.DefinitionOperation performed on a measuring instrument or a measuring system that, under specified conditions
1. establishes a relation between the values with measurement uncertainties provided by measurement standards and corresponding indications with associated measurement uncertainties and
2. uses this information to establish a relation for obtaining a measurement result from an indication
NOTE 1 The objective of calibration is to provide traceability of measurement results obtained when using a calibrated measuring instrument or measuring system.
NOTE 2 The outcome of a calibration may be expressed by a statement, calibration function, calibration diagram, calibration curve, or calibration table. In some cases, it may consist of an additive or multiplicative correction of the indication with associated measurement uncertainty.
NOTE 3 Calibration should not be confused with adjustment of a measuring system, often mistakenly called “selfcalibration”, nor with verification of calibration. Calibration is sometimes a prerequisite for verification, which provides confirmation that specified requirements (often maximum permissible errors) are met. Calibration is sometimes also a prerequisite for adjustment, which is the set of operations carried out on a measuring system such that the system provides prescribed indications corresponding to given values of quantities being measured, typically obtained from
measurement standards.
NOTE 4 Sometimes the first step alone of the operation mentioned in the definition is intended as being calibration, as it was in previous editions of this Vocabulary. The second step is in fact required to establish instrumental uncertainty
for the measurement results obtained when using the calibrated measuring system. The two steps together aim to demonstrate the metrological traceability of measurement results obtained by a calibrated measuring system. In the
past the second step was usually considered to occur after the calibration.
NOTE 5 A comparison between two measurement standards may be viewed as a calibration if the comparison is used to check and, if necessary, correct the value and measurement uncertainty attributed to one of the measurement
standards.

-- International Vocabulary of Metrology(VIM)
Example In nanoindentation, the electrical signal coming from capacitive displacement gauge is converted into a real raw-displacement signal after using a proper calibration function (as obtained by the equipment manufacturer). Then, additional calibration procedures are applied to define the point of initial contact and to correct for instrument compliance, thermal drift, and indenter area function to obtain the real useable displacement data.
DefinitionOperation performed on a measuring instrument or a measuring system that, under specified conditions
1. establishes a relation between the values with measurement uncertainties provided by measurement standards and corresponding indications with associated measurement uncertainties and
2. uses this information to establish a relation for obtaining a measurement result from an indication
NOTE 1 The objective of calibration is to provide traceability of measurement results obtained when using a calibrated measuring instrument or measuring system.
NOTE 2 The outcome of a calibration may be expressed by a statement, calibration function, calibration diagram, calibration curve, or calibration table. In some cases, it may consist of an additive or multiplicative correction of the indication with associated measurement uncertainty.
NOTE 3 Calibration should not be confused with adjustment of a measuring system, often mistakenly called “selfcalibration”, nor with verification of calibration. Calibration is sometimes a prerequisite for verification, which provides confirmation that specified requirements (often maximum permissible errors) are met. Calibration is sometimes also a prerequisite for adjustment, which is the set of operations carried out on a measuring system such that the system provides prescribed indications corresponding to given values of quantities being measured, typically obtained from
measurement standards.
NOTE 4 Sometimes the first step alone of the operation mentioned in the definition is intended as being calibration, as it was in previous editions of this Vocabulary. The second step is in fact required to establish instrumental uncertainty
for the measurement results obtained when using the calibrated measuring system. The two steps together aim to demonstrate the metrological traceability of measurement results obtained by a calibrated measuring system. In the
past the second step was usually considered to occur after the calibration.
NOTE 5 A comparison between two measurement standards may be viewed as a calibration if the comparison is used to check and, if necessary, correct the value and measurement uncertainty attributed to one of the measurement
standards.

-- International Vocabulary of Metrology(VIM)
Label CalibrationProcess
CommentUsed to break-down a CalibrationProcess into his specific tasks.
Preflabel CalibrationTaskUsed to break-down a CalibrationProcess into his specific tasks.
CommentUsed to break-down a CalibrationProcess into his specific tasks.
Label CalibrationTask
CommentIn chemistry and thermodynamics, calorimetry (from Latin calor 'heat', and Greek μέτρον (metron) 'measure') is the science or act of measuring changes in state variables of a body for the purpose of deriving the heat transfer associated with changes of its state due, for example, to chemical reactions, physical changes, or phase transitions under specified constraints. Calorimetry is performed with a calorimeter.
Preflabel CalorimetryIn chemistry and thermodynamics, calorimetry (from Latin calor 'heat', and Greek μέτρον (metron) 'measure') is the science or act of measuring changes in state variables of a body for the purpose of deriving the heat transfer associated with changes of its state due, for example, to chemical reactions, physical changes, or phase transitions under specified constraints. Calorimetry is performed with a calorimeter.
CommentIn chemistry and thermodynamics, calorimetry (from Latin calor 'heat', and Greek μέτρον (metron) 'measure') is the science or act of measuring changes in state variables of a body for the purpose of deriving the heat transfer associated with changes of its state due, for example, to chemical reactions, physical changes, or phase transitions under specified constraints. Calorimetry is performed with a calorimeter.
Label Calorimetry
CommentStripping voltammetry in which material accumulated at the working electrode is electrochemically reduced in the stripping step. A peak-shaped cathodic stripping voltammogram is obtained. Peak current depends on time of accumulation, mass transport of analyte (stirring), scan rate and mode (linear or pulse), and analyte concentration in solution.
Preflabel CathodicStrippingVoltammetry
ElucidationStripping voltammetry in which material accumulated at the working electrode is electrochemically reduced in the stripping step. A peak-shaped cathodic stripping voltammogram is obtained. Peak current depends on time of accumulation, mass transport of analyte (stirring), scan rate and mode (linear or pulse), and analyte concentration in solution.
Altlabel CSV
Iupacreferencehttps://doi.org/10.1515/pac-2018-0109ElucidationStripping voltammetry in which material accumulated at the working electrode is electrochemically reduced in the stripping step. A peak-shaped cathodic stripping voltammogram is obtained. Peak current depends on time of accumulation, mass transport of analyte (stirring), scan rate and mode (linear or pulse), and analyte concentration in solution.
CommentStripping voltammetry in which material accumulated at the working electrode is electrochemically reduced in the stripping step. A peak-shaped cathodic stripping voltammogram is obtained. Peak current depends on time of accumulation, mass transport of analyte (stirring), scan rate and mode (linear or pulse), and analyte concentration in solution.
Wikidatareference https://www.wikidata.org/wiki/Q4016325
Iupacreferencehttps://doi.org/10.1515/pac-2018-0109
Label CathodicStrippingVoltammetry
Comment
Preflabel CharacterisationComponent
Comment
Label CharacterisationComponentAnnotations
CommentRepresents every type of data that is produced during a characterisation process
Preflabel CharacterisationDataRepresents every type of data that is produced during a characterisation process
CommentRepresents every type of data that is produced during a characterisation process
Label CharacterisationData
CommentProcedure to validate the characterisation data.
Preflabel CharacterisationDataValidationProcedure to validate the characterisation data.
CommentProcedure to validate the characterisation data.
Label CharacterisationDataValidation
CommentCharacterisation can either be made in air (ambient conditions, without specific controls on environmental parameters), or at different temperatures, different pressures (or in vacuum), or using different types of working gases (inert or reactive with respect to sample), different levels of humidity, etc.PreflabelCharacterisationEnvironment
CommentCharacterisation can either be made in air (ambient conditions, without specific controls on environmental parameters), or at different temperatures, different pressures (or in vacuum), or using different types of working gases (inert or reactive with respect to sample), different levels of humidity, etc.ElucidationMedium of the characterisation experiment defined by the set of environmental conditions that are controlled and measured over time during the experiment.
CommentMedium of the characterisation experiment defined by the set of environmental conditions that are controlled and measured over time during the experiment.Characterisation can either be made in air (ambient conditions, without specific controls on environmental parameters), or at different temperatures, different pressures (or in vacuum), or using different types of working gases (inert or reactive with respect to sample), different levels of humidity, etc.
PreflabelCharacterisationEnvironmentCommentCharacterisation can either be made in air (ambient conditions, without specific controls on environmental parameters), or at different temperatures, different pressures (or in vacuum), or using different types of working gases (inert or reactive with respect to sample), different levels of humidity, etc.
ElucidationComment Medium of the characterisation experiment defined by the set of environmental conditions that are controlled and measured over time during the experiment.
Comment
Preflabel CharacterisationEnvironmentProperty
Comment
Label CharacterisationEnvironmentProperty
CommentA characterisation experiment is the process by which a material's structure and properties are probed and measured. It is a fundamental process in the field of materials science, without which no scientific understanding of engineering materials could be ascertained.PreflabelCharacterisationExperiment
CommentElucidation A characterisation experiment is the process by which a material's structure and properties are probed and measured. It is a fundamental process in the field of materials science, without which no scientific understanding of engineering materials could be ascertained.
PreflabelCharacterisationExperimentCommentA characterisation experiment is the process by which a material's structure and properties are probed and measured. It is a fundamental process in the field of materials science, without which no scientific understanding of engineering materials could be ascertained.
ElucidationComment A characterisation experiment is the process by which a material's structure and properties are probed and measured. It is a fundamental process in the field of materials science, without which no scientific understanding of engineering materials could be ascertained.
CommentWhatever hardware is used during the characterisation process.
Preflabel CharacterisationHardwareWhatever hardware is used during the characterisation process.
CommentWhatever hardware is used during the characterisation process.
Label CharacterisationHardware
Comment
Preflabel CharacterisationHardwareSpecification
Comment
Label CharacterisationHardwareSpecification
CommentDevice used for making measurements, alone or in conjunction with one or more supplementary
devices
NOTE 1 A measuring instrument that can be used alone for making measurements is a measuring system.
NOTE 2 A measuring instrument is either an indicating measuring instrument or a material measure.		PreflabelCharacterisationMeasurementInstrument
CommentElucidation The instrument used for characterising a material, which usually has a probe and a detector as parts.
CommentDevice used for making measurements, alone or in conjunction with one or more supplementary
devices
NOTE 1 A measuring instrument that can be used alone for making measurements is a measuring system.
NOTE 2 A measuring instrument is either an indicating measuring instrument or a material measure.
PreflabelCharacterisationMeasurementInstrumentCommentThe instrument used for characterising a material, which usually has a probe and a detector as parts.
ElucidationThe instrument used for characterising a material, which usually has a probe and a detector as parts.DefinitionDevice used for making measurements, alone or in conjunction with one or more supplementary
devices
NOTE 1 A measuring instrument that can be used alone for making measurements is a measuring system.
NOTE 2 A measuring instrument is either an indicating measuring instrument or a material measure.
VimtermIn nanoindentation is the nanoindenter
DefinitionDevice used for making measurements, alone or in conjunction with one or more supplementary
devices
NOTE 1 A measuring instrument that can be used alone for making measurements is a measuring system.
NOTE 2 A measuring instrument is either an indicating measuring instrument or a material measure.
Label CharacterisationMeasurementInstrument
CommentProcess of experimentally obtaining one or more values that can reasonably be attributed to a quantity together with any other available relevant information
NOTE 1 The quantity mentioned in the definition is an individual quantity.
NOTE 2 The relevant information mentioned in the definition may be about the values obtained by the measurement,
such that some may be more representative of the measurand than others.
NOTE 3 Measurement is sometimes considered to apply to nominal properties, but not in this Vocabulary, where the
process of obtaining values of nominal properties is called “examination”.
NOTE 4 Measurement requires both experimental comparison of quantities or experimental counting of entities at
some step of the process and the use of models and calculations that are based on conceptual considerations.
NOTE 5 The conditions of reasonable attribution mentioned in the definition take into account a description of the
quantity commensurate with the intended use of a measurement result, a measurement procedure, and a calibrated
measuring system operating according to the specified measurement procedure, including the measurement
conditions. Moreover, a maximum permissible error and/or a target uncertainty may be specified, and the
measurement procedure and the measuring system should then be chosen in order not to exceed these measuring
system specifications.

-- International Vocabulary of Metrology(VIM)		PreflabelCharacterisationMeasurementProcess
CommentElucidation The measurement process associates raw data to the sample through a probe and a detector.
CommentProcess of experimentally obtaining one or more values that can reasonably be attributed to a quantity together with any other available relevant information
NOTE 1 The quantity mentioned in the definition is an individual quantity.
NOTE 2 The relevant information mentioned in the definition may be about the values obtained by the measurement,
such that some may be more representative of the measurand than others.
NOTE 3 Measurement is sometimes considered to apply to nominal properties, but not in this Vocabulary, where the
process of obtaining values of nominal properties is called “examination”.
NOTE 4 Measurement requires both experimental comparison of quantities or experimental counting of entities at
some step of the process and the use of models and calculations that are based on conceptual considerations.
NOTE 5 The conditions of reasonable attribution mentioned in the definition take into account a description of the
quantity commensurate with the intended use of a measurement result, a measurement procedure, and a calibrated
measuring system operating according to the specified measurement procedure, including the measurement
conditions. Moreover, a maximum permissible error and/or a target uncertainty may be specified, and the
measurement procedure and the measuring system should then be chosen in order not to exceed these measuring
system specifications.

-- International Vocabulary of Metrology(VIM)
PreflabelCharacterisationMeasurementProcessCommentThe measurement process associates raw data to the sample through a probe and a detector.
ElucidationThe measurement process associates raw data to the sample through a probe and a detector.DefinitionProcess of experimentally obtaining one or more values that can reasonably be attributed to a quantity together with any other available relevant information
NOTE 1 The quantity mentioned in the definition is an individual quantity.
NOTE 2 The relevant information mentioned in the definition may be about the values obtained by the measurement,
such that some may be more representative of the measurand than others.
NOTE 3 Measurement is sometimes considered to apply to nominal properties, but not in this Vocabulary, where the
process of obtaining values of nominal properties is called “examination”.
NOTE 4 Measurement requires both experimental comparison of quantities or experimental counting of entities at
some step of the process and the use of models and calculations that are based on conceptual considerations.
NOTE 5 The conditions of reasonable attribution mentioned in the definition take into account a description of the
quantity commensurate with the intended use of a measurement result, a measurement procedure, and a calibrated
measuring system operating according to the specified measurement procedure, including the measurement
conditions. Moreover, a maximum permissible error and/or a target uncertainty may be specified, and the
measurement procedure and the measuring system should then be chosen in order not to exceed these measuring
system specifications.

-- International Vocabulary of Metrology(VIM)
Vimterm Measurement
DefinitionProcess of experimentally obtaining one or more values that can reasonably be attributed to a quantity together with any other available relevant information
NOTE 1 The quantity mentioned in the definition is an individual quantity.
NOTE 2 The relevant information mentioned in the definition may be about the values obtained by the measurement,
such that some may be more representative of the measurand than others.
NOTE 3 Measurement is sometimes considered to apply to nominal properties, but not in this Vocabulary, where the
process of obtaining values of nominal properties is called “examination”.
NOTE 4 Measurement requires both experimental comparison of quantities or experimental counting of entities at
some step of the process and the use of models and calculations that are based on conceptual considerations.
NOTE 5 The conditions of reasonable attribution mentioned in the definition take into account a description of the
quantity commensurate with the intended use of a measurement result, a measurement procedure, and a calibrated
measuring system operating according to the specified measurement procedure, including the measurement
conditions. Moreover, a maximum permissible error and/or a target uncertainty may be specified, and the
measurement procedure and the measuring system should then be chosen in order not to exceed these measuring
system specifications.

-- International Vocabulary of Metrology(VIM)
Label CharacterisationMeasurementProcess
CommentUsed to break-down a CharacterisationMeasurementProcess into his specific tasks.
Comment
Preflabel CharacterisationMeasurementTaskUsed to break-down a CharacterisationMeasurementProcess into his specific tasks.
CommentUsed to break-down a CharacterisationMeasurementProcess into his specific tasks.
Label CharacterisationMeasurementTask
CommentCharacterisation procedure may refer to the full characterisation process or just a part of the full process.
CommentCharacterisation procedure may refer to the full characterisation process or just a part of the full process.PreflabelCharacterisationProcedure
CommentElucidation The process of performing characterisation by following some existing formalised operative rules.
CommentCharacterisation procedure may refer to the full characterisation process or just a part of the full process.
PreflabelCharacterisationProcedureCommentCharacterisation procedure may refer to the full characterisation process or just a part of the full process.
ElucidationComment The process of performing characterisation by following some existing formalised operative rules.
CommentDescribes why the characterization procedure was chosen and deemed to be the most useful for the sample.
Comment
Preflabel CharacterisationProcedureValidationDescribes why the characterization procedure was chosen and deemed to be the most useful for the sample.
CommentDescribes why the characterization procedure was chosen and deemed to be the most useful for the sample.
Label CharacterisationProcedureValidation
CommentThe characterisation property is the investigate property or behaviour of a sample. It is derived from the secondary data, usually after classification or quantification (manually or by a model).
Comment
Preflabel CharacterisationPropertyThe characterisation property is the investigate property or behaviour of a sample. It is derived from the secondary data, usually after classification or quantification (manually or by a model).
CommentThe characterisation property is the investigate property or behaviour of a sample. It is derived from the secondary data, usually after classification or quantification (manually or by a model).
Label CharacterisationProperty
CommentA characterisation protocol is defined whenever it is desirable to standardize a laboratory method to ensure successful replication of results by others in the same laboratory or by other laboratories.
Comment
Preflabel CharacterisationProtocolA characterisation protocol is defined whenever it is desirable to standardize a laboratory method to ensure successful replication of results by others in the same laboratory or by other laboratories.
CommentA characterisation protocol is defined whenever it is desirable to standardize a laboratory method to ensure successful replication of results by others in the same laboratory or by other laboratories.
Label CharacterisationProtocol
CommentA software application to process characterisation data
Comment
Preflabel CharacterisationSoftwareA software application to process characterisation data
CommentA software application to process characterisation data
Example In Nanoindentation post-processing the software used to apply the Oliver-Pharr to calculate the characterisation properties (i.e. elastic modulus, hardness) from load and depth data.
CommentA set of one or more 'CharacterisationInstruments' and often other devices, including any sample holder, reagent and supply, assembled and adapted to give information used to generate 'MeasuredQuantityProperty' within specified intervals for quantities of specified kinds.PreflabelCharacterisationSystem
CommentSet of one or more measuring instruments and often other components, assembled and
adapted to give information used to generate measured values within specified intervals for
quantities of specified kinds
NOTE 1 The components mentioned in the definition may be devices, reagents, and supplies.
NOTE 2 A measuring system is sometimes referred to as “measuring equipment” or “device”, for example in ISO 10012,
Measurement management systems – Requirements for measurement processes and measuring equipment and ISO
17025, General requirements for the competence of testing and calibration laboratories.
NOTE 3 Although the terms “measuring system” and “measurement system” are frequently used synonymously, the
latter is instead sometimes used to refer to a measuring system plus all other entities involved in a measurement,
including the object under measurement and the person(s) performing the measurement.
NOTE 4 A measuring system can be used as a measurement standard.		ElucidationA set of one or more 'CharacterisationInstruments' and often other devices, including any sample holder, reagent and supply, assembled and adapted to give information used to generate 'MeasuredQuantityProperty' within specified intervals for quantities of specified kinds.
CommentA set of one or more 'CharacterisationInstruments' and often other devices, including any sample holder, reagent and supply, assembled and adapted to give information used to generate 'MeasuredQuantityProperty' within specified intervals for quantities of specified kinds.
PreflabelCharacterisationSystemCommentSet of one or more measuring instruments and often other components, assembled and
adapted to give information used to generate measured values within specified intervals for
quantities of specified kinds
NOTE 1 The components mentioned in the definition may be devices, reagents, and supplies.
NOTE 2 A measuring system is sometimes referred to as “measuring equipment” or “device”, for example in ISO 10012,
Measurement management systems – Requirements for measurement processes and measuring equipment and ISO
17025, General requirements for the competence of testing and calibration laboratories.
NOTE 3 Although the terms “measuring system” and “measurement system” are frequently used synonymously, the
latter is instead sometimes used to refer to a measuring system plus all other entities involved in a measurement,
including the object under measurement and the person(s) performing the measurement.
NOTE 4 A measuring system can be used as a measurement standard.
ElucidationA set of one or more 'CharacterisationInstruments' and often other devices, including any sample holder, reagent and supply, assembled and adapted to give information used to generate 'MeasuredQuantityProperty' within specified intervals for quantities of specified kinds.DefinitionSet of one or more measuring instruments and often other components, assembled and
adapted to give information used to generate measured values within specified intervals for
quantities of specified kinds
NOTE 1 The components mentioned in the definition may be devices, reagents, and supplies.
NOTE 2 A measuring system is sometimes referred to as “measuring equipment” or “device”, for example in ISO 10012,
Measurement management systems – Requirements for measurement processes and measuring equipment and ISO
17025, General requirements for the competence of testing and calibration laboratories.
NOTE 3 Although the terms “measuring system” and “measurement system” are frequently used synonymously, the
latter is instead sometimes used to refer to a measuring system plus all other entities involved in a measurement,
including the object under measurement and the person(s) performing the measurement.
NOTE 4 A measuring system can be used as a measurement standard.
Vimterm Measuring system
DefinitionSet of one or more measuring instruments and often other components, assembled and
adapted to give information used to generate measured values within specified intervals for
quantities of specified kinds
NOTE 1 The components mentioned in the definition may be devices, reagents, and supplies.
NOTE 2 A measuring system is sometimes referred to as “measuring equipment” or “device”, for example in ISO 10012,
Measurement management systems – Requirements for measurement processes and measuring equipment and ISO
17025, General requirements for the competence of testing and calibration laboratories.
NOTE 3 Although the terms “measuring system” and “measurement system” are frequently used synonymously, the
latter is instead sometimes used to refer to a measuring system plus all other entities involved in a measurement,
including the object under measurement and the person(s) performing the measurement.
NOTE 4 A measuring system can be used as a measurement standard.
Label CharacterisationSystemAnnotations
Comment
Preflabel CharacterisationTask
Comment
Label CharacterisationTask
CommentA characterisation method is not only related to the measurement process which can be one of its steps.PreflabelCharacterisationTechnique
CommentThe description of the overall characterisation method. It can be composed of different steps (e.g. sample preparation, calibration, measurement, post-processing).AltlabelCharacterisation procedure
CommentAltlabelCharacterisation technique
CommentA characterisation method is not only related to the measurement process which can be one of its steps.ElucidationThe description of the overall characterisation method. It can be composed of different steps (e.g. sample preparation, calibration, measurement, post-processing).
PreflabelCharacterisationTechniqueCommentA characterisation method is not only related to the measurement process which can be one of its steps.
ElucidationComment The description of the overall characterisation method. It can be composed of different steps (e.g. sample preparation, calibration, measurement, post-processing).
AltlabelCharacterisation procedure
AltlabelCharacterisation techniqueCommentA characterisation method is not only related to the measurement process which can be one of its steps.
Label
CommentPreflabelCharacterisationWorkflow
Elucidation A characterisation procedure that has at least two characterisation tasks as proper parts.
CommentA characterisation procedure that has at least two characterisation tasks as proper parts.
PreflabelCharacterisationWorkflow
ElucidationA characterisation procedure that has at least two characterisation tasks as proper parts.
LabelLabel CharacterisationWorkflow
CommentThe sample after having been subjected to a characterization process
Comment
Preflabel CharacterisedSampleThe sample after having been subjected to a characterization process
CommentThe sample after having been subjected to a characterization process
Label CharacterisedSample
Comment
Preflabel ChargeDistribution
Comment
Label ChargeDistribution
CommentIn chemical analysis, chromatography is a laboratory technique for the separation of a mixture into its components.
Comment
Preflabel ChromatographyIn chemical analysis, chromatography is a laboratory technique for the separation of a mixture into its components.
CommentIn chemical analysis, chromatography is a laboratory technique for the separation of a mixture into its components.
Wikipediareference https://en.wikipedia.org/wiki/Chromatography
CommentIf the potential step is from a potential at which no current flows (i.e., at which the oxidation or reduction of the electrochemically active species does not take place) to one at which the current is limited by diffusion (see diffusion-limited current), the current obeys the Cottrell equation.
Commentamperometry in which the current is measured as a function of time after a change in the applied potential
Comment
Preflabel Chronoamperometry
Elucidationamperometry in which the current is measured as a function of time after a change in the applied potential
Altlabel AmperiometricDetectionAmperometricCurrentTimeCurve
ElucidationAmperometry in which the current is measured as a function of time after a change in the applied potential. If the potential step is from a potential at which no current flows (i.e., at which the oxidation or reduction of the electrochemically active species does not take place) to one at which the current is limited by diffusion (see diffusion-limited current), the current obeys the Cottrell equation.
CommentAmperometry in which the current is measured as a function of time after a change in the applied potential. If the potential step is from a potential at which no current flows (i.e., at which the oxidation or reduction of the electrochemically active species does not take place) to one at which the current is limited by diffusion (see diffusion-limited current), the current obeys the Cottrell equation.
Iupacreference https://doi.org/10.1515/pac-2018-0109
CommentChronocoulometry provides the same information that is provided by chronoamperometry, since it is based on the integration of the I-t curve. Nevertheless, chronocoulometry offers important experimental advantages, such as (i) the measured signal usually increases with time and hence the later parts of the transient can be detected more accurately, (ii) a better signal-to-noise ratio can be achieved, and (iii) other contributions to overall charge passed as a function of time can be discriminated from those due to the diffusion of electroactive substances.
Commentdirect coulometry at controlled potential in which the electric charge passed after the application of a potential step perturbation is measured as a function of time (Q-t curve)
Comment
Preflabel Chronocoulometry
Elucidationdirect coulometry at controlled potential in which the electric charge passed after the application of a potential step perturbation is measured as a function of time (Q-t curve)Direct coulometry at controlled potential in which the electric charge passed after the application of a potential step perturbation is measured as a function of time (Q-t curve). Chronocoulometry provides the same information that is provided by chronoamperometry, since it is based on the integration of the I-t curve. Nevertheless, chronocoulometry offers important experimental advantages, such as (i) the measured signal usually increases with time and hence the later parts of the transient can be detected more accurately, (ii) a better signal-to-noise ratio can be achieved, and (iii) other contributions to overall charge passed as a function of time can be discriminated from those due to the diffusion of electroactive substances.
CommentDirect coulometry at controlled potential in which the electric charge passed after the application of a potential step perturbation is measured as a function of time (Q-t curve). Chronocoulometry provides the same information that is provided by chronoamperometry, since it is based on the integration of the I-t curve. Nevertheless, chronocoulometry offers important experimental advantages, such as (i) the measured signal usually increases with time and hence the later parts of the transient can be detected more accurately, (ii) a better signal-to-noise ratio can be achieved, and (iii) other contributions to overall charge passed as a function of time can be discriminated from those due to the diffusion of electroactive substances.
Iupacreference
CommentThe change in applied current is usually a step, but cyclic current reversals or linearly increasing currents are also used.
Commentpotentiometry in which the potential is measured with time following a change in applied current
Comment
Preflabel Chronopotentiometry
Elucidationpotentiometry in which the potential is measured with time following a change in applied currentPotentiometry in which the potential is measured with time following a change in applied current. The change in applied current is usually a step, but cyclic current reversals or linearly increasing currents are also used.
CommentPotentiometry in which the potential is measured with time following a change in applied current. The change in applied current is usually a step, but cyclic current reversals or linearly increasing currents are also used.
Iupacreference
CommentCompression tests characterize material and product strength and stiffness under applied crushing loads. These tests are typically conducted by applying compressive pressure to a test specimen using platens or specialized fixtures with a testing machine that produces compressive loads.
Comment
Preflabel CompressionTestingCompression tests characterize material and product strength and stiffness under applied crushing loads. These tests are typically conducted by applying compressive pressure to a test specimen using platens or specialized fixtures with a testing machine that produces compressive loads.
CommentCompression tests characterize material and product strength and stiffness under applied crushing loads. These tests are typically conducted by applying compressive pressure to a test specimen using platens or specialized fixtures with a testing machine that produces compressive loads.
Label CompressionTestingAnnotations
CommentThe equivalence-point is obtained as the intersection of linear parts of the conductance G, versus titrant volume V, curve (see
CommentThe method can be used for deeply coloured or turbid solutions. Acid-base and precipita- tion reactions are most frequently used.
CommentThe method is based on replacing an ionic species of the analyte with another species, cor- responding to the titrant or the product with significantly different conductance.
Commenttitration in which the electric conductivity of a solution is measured as a function of the amount of titrant added
Comment
Preflabel ConductometricTitration
Elucidationtitration in which the electric conductivity of a solution is measured as a function of the amount of titrant addedTitration in which the electric conductivity of a solution is measured as a function of the amount of titrant added. The equivalence-point is obtained as the intersection of linear parts of the conductance G, versus titrant volume V, curve. The method can be used for deeply coloured or turbid solutions. Acid-base and precipitation reactions are most frequently used. The method is based on replacing an ionic species of the analyte with another species, cor- responding to the titrant or the product with significantly different conductance.
Iupacreferencehttps://doi.org/10.1515/pac-2018-0109CommentTitration in which the electric conductivity of a solution is measured as a function of the amount of titrant added. The equivalence-point is obtained as the intersection of linear parts of the conductance G, versus titrant volume V, curve. The method can be used for deeply coloured or turbid solutions. Acid-base and precipitation reactions are most frequently used. The method is based on replacing an ionic species of the analyte with another species, cor- responding to the titrant or the product with significantly different conductance.
Wikidatareference https://www.wikidata.org/wiki/Q11778221
Iupacreferencehttps://doi.org/10.1515/pac-2018-0109
Label ConductometricTitration
CommentThe conductivity of a solution depends on the concentration and nature of ions present.PreflabelConductometry
Commentmeasurement principle in which the electric conductivity of a solution is measuredElucidationMeasurement principle in which the electric conductivity of a solution is measured. The conductivity of a solution depends on the concentration and nature of ions present.
CommentMeasurement principle in which the electric conductivity of a solution is measured. The conductivity of a solution depends on the concentration and nature of ions present.
PreflabelConductometryWikipediareferencehttps://en.wikipedia.org/wiki/Conductometry
Elucidationmeasurement principle in which the electric conductivity of a solution is measuredWikidatareferencehttps://www.wikidata.org/wiki/Q901180
Examplehttps://doi.org/10.1515/pac-2018-0109
Wikidatareferencehttps://www.wikidata.org/wiki/Q901180
Wikipediareferencehttps://en.wikipedia.org/wiki/Conductometry
Label Conductometry
CommentConfocal microscopy, most frequently confocal laser scanning microscopy (CLSM) or laser scanning confocal microscopy (LSCM), is an optical imaging technique for increasing optical resolution and contrast of a micrograph by means of using a spatial pinhole to block out-of-focus light in image formation.
Comment
Preflabel ConfocalMicroscopyConfocal microscopy, most frequently confocal laser scanning microscopy (CLSM) or laser scanning confocal microscopy (LSCM), is an optical imaging technique for increasing optical resolution and contrast of a micrograph by means of using a spatial pinhole to block out-of-focus light in image formation.
CommentConfocal microscopy, most frequently confocal laser scanning microscopy (CLSM) or laser scanning confocal microscopy (LSCM), is an optical imaging technique for increasing optical resolution and contrast of a micrograph by means of using a spatial pinhole to block out-of-focus light in image formation.
Label ConfocalMicroscopyAnnotations
CommentCoulometric titrations are usually carried out in convective mass transfer mode using a large surface working electrode. The reference and auxiliary electrodes are located in sepa- rate compartments. A basic requirement is a 100 % current efficiency of titrant generation at the working electrode. End-point detection can be accomplished with potentiometry, amperometry, biamperometry, bipotentiometry, photometry, or by using a visual indicator.
CommentThe main advantages are that titration is possible with less stable titrants, the standardi- zation of titrant is not necessary, the volume of the test solution is not changed, and the method is easily automated.
Commenttitration in which the titrant is generated electrochemically, either by constant current or at constant potential. The titrant reacts stoichiometrically with the analyte, the amount of which is calculated using Faraday’s laws of electrolysis from the electric charge required to reach the end-point
Comment
Preflabel CoulometricTitration
Elucidationtitration in which the titrant is generated electrochemically, either by constant current or at constant potential. The titrant reacts stoichiometrically with the analyte, the amount of which is calculated using Faraday’s laws of electrolysis from the electric charge required to reach the end-pointTitration in which the titrant is generated electrochemically, either by constant current or at constant potential. The titrant reacts stoichiometrically with the analyte, the amount of which is calculated using Faraday’s laws of electrolysis from the electric charge required to reach the end-point. Coulometric titrations are usually carried out in convective mass transfer mode using a large surface working electrode. The reference and auxiliary electrodes are located in sepa- rate compartments. A basic requirement is a 100 % current efficiency of titrant generation at the working electrode. End-point detection can be accomplished with potentiometry, amperometry, biamperometry, bipotentiometry, photometry, or by using a visual indicator. The main advantages are that titration is possible with less stable titrants, the standardi- zation of titrant is not necessary, the volume of the test solution is not changed, and the method is easily automated.
CommentTitration in which the titrant is generated electrochemically, either by constant current or at constant potential. The titrant reacts stoichiometrically with the analyte, the amount of which is calculated using Faraday’s laws of electrolysis from the electric charge required to reach the end-point. Coulometric titrations are usually carried out in convective mass transfer mode using a large surface working electrode. The reference and auxiliary electrodes are located in sepa- rate compartments. A basic requirement is a 100 % current efficiency of titrant generation at the working electrode. End-point detection can be accomplished with potentiometry, amperometry, biamperometry, bipotentiometry, photometry, or by using a visual indicator. The main advantages are that titration is possible with less stable titrants, the standardi- zation of titrant is not necessary, the volume of the test solution is not changed, and the method is easily automated.
Label
CommentCoulometry used to measure the amount of substance is a primary reference measurement procedure [VIM 2.8] not requiring calibration with a standard for a quantity of the same kind (i.e. amount of substance).
CommentThe coulometric experiment can be carried out at controlled (constant) potential (see direct coulometry at controlled potential) or controlled (constant) current (see direct coulometry at controlled current).PreflabelCoulometry
Commentelectrochemical measurement principle in which the electric charge required to carry out a known electrochemical reaction is measured. By Faraday’s laws of electrolysis, the amount of substance is proportional to the chargeElucidationElectrochemical measurement principle in which the electric charge required to carry out a known electrochemical reaction is measured. By Faraday’s laws of electrolysis, the amount of substance is proportional to the charge. Coulometry used to measure the amount of substance is a primary reference measurement procedure [VIM 2.8] not requiring calibration with a standard for a quantity of the same kind (i.e. amount of substance). The coulometric experiment can be carried out at controlled (constant) potential (see direct coulometry at controlled potential) or controlled (constant) current (see direct coulometry at controlled current).
CommentElectrochemical measurement principle in which the electric charge required to carry out a known electrochemical reaction is measured. By Faraday’s laws of electrolysis, the amount of substance is proportional to the charge. Coulometry used to measure the amount of substance is a primary reference measurement procedure [VIM 2.8] not requiring calibration with a standard for a quantity of the same kind (i.e. amount of substance). The coulometric experiment can be carried out at controlled (constant) potential (see direct coulometry at controlled potential) or controlled (constant) current (see direct coulometry at controlled current).
PreflabelCoulometryWikipediareferencehttps://en.wikipedia.org/wiki/Coulometry
Elucidationelectrochemical measurement principle in which the electric charge required to carry out a known electrochemical reaction is measured. By Faraday’s laws of electrolysis, the amount of substance is proportional to the chargeWikidatareferencehttps://www.wikidata.org/wiki/Q1136979
Iupacreference https://doi.org/10.1515/pac-2018-0109
Wikidatareferencehttps://www.wikidata.org/wiki/Q1136979
Ievreference https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-04-13
Wikipediareferencehttps://en.wikipedia.org/wiki/Coulometry
Label Coulometry
CommentThe creep test is a destructive materials testing method for determination of the long-term strength and heat resistance of a material. When running a creep test, the specimen is subjected to increased temperature conditions for an extended period of time and loaded with a constant tensile force or tensile stress.
Comment
Preflabel CreepTestingThe creep test is a destructive materials testing method for determination of the long-term strength and heat resistance of a material. When running a creep test, the specimen is subjected to increased temperature conditions for an extended period of time and loaded with a constant tensile force or tensile stress.
CommentThe creep test is a destructive materials testing method for determination of the long-term strength and heat resistance of a material. When running a creep test, the specimen is subjected to increased temperature conditions for an extended period of time and loaded with a constant tensile force or tensile stress.
Label CreepTesting
Comment
Preflabel CriticalAndSupercriticalChromatography
Comment
Label CriticalAndSupercriticalChromatography
Commentchronopotentiometry where the change in applied current undergoes a cyclic current reversal
Comment
Preflabel CyclicChronopotentiometry
ElucidationChronopotentiometry where the change in applied current undergoes a cyclic current reversal.
Elucidation chronopotentiometry where the change in applied current undergoes a cyclic current reversal
CommentChronopotentiometry where the change in applied current undergoes a cyclic current reversal.
Label CyclicChronopotentiometry
CommentCyclic voltammetry is frequently used for the investigation of mechanisms of electrochemi- cal/electrode reactions. The current-potential curve may be modelled to obtain reaction mechanisms and electrochemical parameters.
CommentNormally the initial potential is chosen where no electrode reaction occurs and the switch- ing potential is greater (more positive for an oxidation or more negative for a reduction) than the peak potential of the analyte reaction.
CommentThe initial potential is usually the negative or positive limit of the cycle but can have any value between the two limits, as can the initial scan direction. The limits of the potential are known as the switching potentials.PreflabelCyclicVoltammetry
CommentThe plot of current against potential is termed a cyclic voltammogram. Usually peak-shaped responses are obtained for scans in both directions.AltlabelCV
Commentvoltammetry in which the electric current is recorded as the electrode potential is varied with time cycli- cally between two potential limits, normally at a constant scan rateElucidationVoltammetry in which the electric current is recorded as the electrode potential is varied with time cyclically between two potential limits, normally at a constant scan rate. Cyclic voltammetry is frequently used for the investigation of mechanisms of electrochemical/electrode reactions. The current-potential curve may be modelled to obtain reaction mechanisms and electrochemical parameters. Normally the initial potential is chosen where no electrode reaction occurs and the switching potential is greater (more positive for an oxidation or more negative for a reduction) than the peak potential of the analyte reaction. The initial potential is usually the negative or positive limit of the cycle but can have any value between the two limits, as can the initial scan direction. The limits of the potential are known as the switching potentials. The plot of current against potential is termed a cyclic voltammogram. Usually peak-shaped responses are obtained for scans in both directions.
CommentVoltammetry in which the electric current is recorded as the electrode potential is varied with time cyclically between two potential limits, normally at a constant scan rate. Cyclic voltammetry is frequently used for the investigation of mechanisms of electrochemical/electrode reactions. The current-potential curve may be modelled to obtain reaction mechanisms and electrochemical parameters. Normally the initial potential is chosen where no electrode reaction occurs and the switching potential is greater (more positive for an oxidation or more negative for a reduction) than the peak potential of the analyte reaction. The initial potential is usually the negative or positive limit of the cycle but can have any value between the two limits, as can the initial scan direction. The limits of the potential are known as the switching potentials. The plot of current against potential is termed a cyclic voltammogram. Usually peak-shaped responses are obtained for scans in both directions.
PreflabelCyclicVoltammetryWikipediareferencehttps://en.wikipedia.org/wiki/Cyclic_voltammetry
Elucidationvoltammetry in which the electric current is recorded as the electrode potential is varied with time cycli- cally between two potential limits, normally at a constant scan rateWikidatareferencehttps://www.wikidata.org/wiki/Q1147647
AltlabelCVDbpediareferencehttps://dbpedia.org/page/Cyclic_voltammetry
Iupacreference https://doi.org/10.1515/pac-2018-0109
Dbpediareferencehttps://dbpedia.org/page/Cyclic_voltammetry
Wikidatareferencehttps://www.wikidata.org/wiki/Q1147647
Wikipediareferencehttps://en.wikipedia.org/wiki/Cyclic_voltammetry
LabelCyclicVoltammetryLabelCyclicVoltammetry
Formal description
CommentIf the whole scan is performed on a single growing drop, the technique should be called single drop scan voltammetry. The term polarography in this context is discouraged.
CommentThis is the oldest variant of polarographic techniques, introduced by Jaroslav Heyrovský (1890 – 1967).
CommentUsually the drop time is between 1 and 5 s and the pseudo-steady-state wave-shaped dependence on potential is called a polarogram. If the limiting current is controlled by dif- fusion, it is expressed by the Ilkovich equation.
Commentlinear scan voltammetry with slow scan rate in which a dropping mercury electrode is used as the working electrode
Comment
Preflabel DCPolarography
Elucidationlinear scan voltammetry with slow scan rate in which a dropping mercury electrode is used as the working electrodeLinear scan voltammetry with slow scan rate in which a dropping mercury electrode is used as the working electrode. If the whole scan is performed on a single growing drop, the technique should be called single drop scan voltammetry. The term polarography in this context is discouraged. This is the oldest variant of polarographic techniques, introduced by Jaroslav Heyrovský (1890 – 1967). Usually the drop time is between 1 and 5 s and the pseudo-steady-state wave-shaped dependence on potential is called a polarogram. If the limiting current is controlled by diffusion, it is expressed by the Ilkovich equation.
CommentLinear scan voltammetry with slow scan rate in which a dropping mercury electrode is used as the working electrode. If the whole scan is performed on a single growing drop, the technique should be called single drop scan voltammetry. The term polarography in this context is discouraged. This is the oldest variant of polarographic techniques, introduced by Jaroslav Heyrovský (1890 – 1967). Usually the drop time is between 1 and 5 s and the pseudo-steady-state wave-shaped dependence on potential is called a polarogram. If the limiting current is controlled by diffusion, it is expressed by the Ilkovich equation.
Iupacreference
CommentQuantify the raw data acquisition rate, if applicable.
Comment
Preflabel DataAcquisitionRate
ElucidationQuantify the raw data acquisition rate, if applicable.Quantifies the raw data acquisition rate, if applicable.
CommentQuantifies the raw data acquisition rate, if applicable.
Label
CommentData processing activities performed on the secondary data to determine the characterisation property (e.g. classification, quantification), which can be performed manually or exploiting a model.
Comment
Preflabel DataAnalysisData processing activities performed on the secondary data to determine the characterisation property (e.g. classification, quantification), which can be performed manually or exploiting a model.
CommentData processing activities performed on the secondary data to determine the characterisation property (e.g. classification, quantification), which can be performed manually or exploiting a model.
Label DataAnalysis
CommentData filtering is the process of examining a dataset to exclude, rearrange, or apportion data according to certain criteria.
Preflabel DataFilteringData filtering is the process of examining a dataset to exclude, rearrange, or apportion data according to certain criteria.
CommentData filtering is the process of examining a dataset to exclude, rearrange, or apportion data according to certain criteria.
Label DataFiltering
CommentIt involves the creation of shifted and/or scaled versions of the values to allow post-processing in a way that eliminates the effects of influences on subsequent properties extraction.PreflabelDataNormalisation
CommentElucidation Data normalization involves adjusting raw data to a notionally common scale.
PreflabelDataNormalisationData normalization involves adjusting raw data to a notionally common scale.
ElucidationData normalization involves adjusting raw data to a notionally common scale.CommentIt involves the creation of shifted and/or scaled versions of the values to allow post-processing in a way that eliminates the effects of influences on subsequent properties extraction.
Label
CommentAnalysis, that allows one to calculate the final material property from the calibrated primary data.
Preflabel DataPostProcessingAnalysis, that allows one to calculate the final material property from the calibrated primary data.
CommentAnalysis, that allows one to calculate the final material property from the calibrated primary data.
Label DataPostProcessing
CommentData preparation is the process of manipulating (or pre-processing) data (which may come from disparate data sources) to improve their quality or reduce bias in subsequent analysis.
Preflabel DataPreparationData preparation is the process of manipulating (or pre-processing) data (which may come from disparate data sources) to improve their quality or reduce bias in subsequent analysis.
CommentData preparation is the process of manipulating (or pre-processing) data (which may come from disparate data sources) to improve their quality or reduce bias in subsequent analysis.
Label DataPreparation
CommentDescribes how raw data are corrected and/or modified through calibrations.
Comment
Preflabel DataProcessingThroughCalibrationDescribes how raw data are corrected and/or modified through calibrations.
CommentDescribes how raw data are corrected and/or modified through calibrations.
Label DataProcessingThroughCalibration
CommentEvaluation of quality indicators to determine how well suited a data set is to be used for the characterisation of a material.
Comment
Preflabel DataQualityEvaluation of quality indicators to determine how well suited a data set is to be used for the characterisation of a material.
CommentEvaluation of quality indicators to determine how well suited a data set is to be used for the characterisation of a material.
Example Example evaluation of S/N ratio, or other quality indicators (limits of detection/quantification, statistical analysis of data, data robustness analysis)
Annotations
CommentPhysical device (or the chain of devices) that is used to measure, quantify and store the signal after its interaction with the sample.
Comment
Preflabel DetectorElucidation Physical device (or the chain of devices) that is used to measure, quantify and store the signal after its interaction with the sample.
CommentPhysical device (or the chain of devices) that is used to measure, quantify and store the signal after its interaction with the sample.
Example Back Scattered Electrons (BSE) and Secondary Electrons (SE) detectors for SEM
CommentDielectric spectroscopy (DS) or impedance spectroscopy, also known as electrochemical impedance spectroscopy, is frequently used to study the response of a sample subjected to an applied electric field of fixed or changing frequency. DS describes the dielectric properties of a material as a function of frequency. In DS, the radio and microwave frequency regions of the electromagnetic spectrum have been successfully made to interact with materials, so as to study the behavior of molecules. The interaction of applied alternating electric fields with dipoles possessing reorientation mobility in materials is also dealt by DS.
Comment
Preflabel DielectricAndImpedanceSpectroscopyDielectric spectroscopy (DS) or impedance spectroscopy, also known as electrochemical impedance spectroscopy, is frequently used to study the response of a sample subjected to an applied electric field of fixed or changing frequency. DS describes the dielectric properties of a material as a function of frequency. In DS, the radio and microwave frequency regions of the electromagnetic spectrum have been successfully made to interact with materials, so as to study the behavior of molecules. The interaction of applied alternating electric fields with dipoles possessing reorientation mobility in materials is also dealt by DS.
CommentDielectric spectroscopy (DS) or impedance spectroscopy, also known as electrochemical impedance spectroscopy, is frequently used to study the response of a sample subjected to an applied electric field of fixed or changing frequency. DS describes the dielectric properties of a material as a function of frequency. In DS, the radio and microwave frequency regions of the electromagnetic spectrum have been successfully made to interact with materials, so as to study the behavior of molecules. The interaction of applied alternating electric fields with dipoles possessing reorientation mobility in materials is also dealt by DS.
Label DielectricAndImpedanceSpectroscopy
CommentDielectrometric titrations use dielectrometry for the end-point detection.
CommentThe method is used to monitor the purity of dielectrics, for example to detect small amounts of moisture.
Commentelectrochemical measurement principle based on the measurement of the dielectric constant of a sample resulting from the orientation of particles (molecules or ions) that have a dipole moment in an electric field
Comment
Preflabel Dielectrometry
Elucidationelectrochemical measurement principle based on the measurement of the dielectric constant of a sample resulting from the orientation of particles (molecules or ions) that have a dipole moment in an electric fieldElectrochemical measurement principle based on the measurement of the dielectric constant of a sample resulting from the orientation of particles (molecules or ions) that have a dipole moment in an electric field. Dielectrometric titrations use dielectrometry for the end-point detection. The method is used to monitor the purity of dielectrics, for example to detect small amounts of moisture.
CommentElectrochemical measurement principle based on the measurement of the dielectric constant of a sample resulting from the orientation of particles (molecules or ions) that have a dipole moment in an electric field. Dielectrometric titrations use dielectrometry for the end-point detection. The method is used to monitor the purity of dielectrics, for example to detect small amounts of moisture.
Iupacreference
CommentDifferential Pulse Voltammetry in which small potential pulses are superimposed onto a linearly varying potential.
Comment
Preflabel DifferentialLinearPulseVoltammetryDifferential Pulse Voltammetry in which small potential pulses are superimposed onto a linearly varying potential.
CommentDifferential Pulse Voltammetry in which small potential pulses are superimposed onto a linearly varying potential.
Label DifferentialLinearPulseVoltammetry
CommentDifferential pulse polarography is differential pulse voltammetry in which a dropping mercury electrode is used as the working electrode. A pulse is applied before the mechani- cally enforced end of the drop and the current is sampled twice: just before the onset of the pulse and just before its end. The pulse width is usually 10 to 20 % of the drop life. The drop dislodgement is synchronized with current sampling, which is carried out as in DPV.
CommentThe ratio of faradaic current to charging current is enhanced and the negative influence of charging current is partially eliminated in the same way as in normal pulse voltammetry (NPV). Moreover, subtraction of the charging current sampled before the application of the pulse further decreases its negative influence. Due to the more enhanced signal (faradaic current) to noise (charging current) ratio, the limit of detection is lower than with NPV.
CommentThe sensitivity of DPV depends on the reversibility of the electrode reaction of the analyte.
Commentvoltammetry in which small potential pulses (constant height 10 to 100 mV, constant width 10 to 100 ms) are superimposed onto a linearly varying potential or onto a staircase potential ramp. The current is sampled just before the onset of the pulse (e.g. 10 to 20 ms) and for the same sampling time just before the end of the pulse. The difference between the two sampled currents is plotted versus the potential applied before the pulse. Thus, a differential pulse voltammogram is peak-shaped
Comment
Preflabel DifferentialPulseVoltammetry
AltlabelDPV
Elucidationvoltammetry in which small potential pulses (constant height 10 to 100 mV, constant width 10 to 100 ms) are superimposed onto a linearly varying potential or onto a staircase potential ramp. The current is sampled just before the onset of the pulse (e.g. 10 to 20 ms) and for the same sampling time just before the end of the pulse. The difference between the two sampled currents is plotted versus the potential applied before the pulse. Thus, a differential pulse voltammogram is peak-shapedVoltammetry in which small potential pulses (constant height 10 to 100 mV, constant width 10 to 100 ms) are superimposed onto a linearly varying potential or onto a staircase potential ramp. The current is sampled just before the onset of the pulse (e.g. 10 to 20 ms) and for the same sampling time just before the end of the pulse. The difference between the two sampled currents is plotted versus the potential applied before the pulse. Thus, a differential pulse voltammogram is peak-shaped. Differential pulse polarography is differential pulse voltammetry in which a dropping mercury electrode is used as the working electrode. A pulse is applied before the mechani- cally enforced end of the drop and the current is sampled twice: just before the onset of the pulse and just before its end. The pulse width is usually 10 to 20 % of the drop life. The drop dislodgement is synchronized with current sampling, which is carried out as in DPV. The ratio of faradaic current to charging current is enhanced and the negative influence of charging current is partially eliminated in the same way as in normal pulse voltammetry (NPV). Moreover, subtraction of the charging current sampled before the application of the pulse further decreases its negative influence. Due to the more enhanced signal (faradaic current) to noise (charging current) ratio, the limit of detection is lower than with NPV. The sensitivity of DPV depends on the reversibility of the electrode reaction of the analyte.
AltlabelDPVCommentVoltammetry in which small potential pulses (constant height 10 to 100 mV, constant width 10 to 100 ms) are superimposed onto a linearly varying potential or onto a staircase potential ramp. The current is sampled just before the onset of the pulse (e.g. 10 to 20 ms) and for the same sampling time just before the end of the pulse. The difference between the two sampled currents is plotted versus the potential applied before the pulse. Thus, a differential pulse voltammogram is peak-shaped. Differential pulse polarography is differential pulse voltammetry in which a dropping mercury electrode is used as the working electrode. A pulse is applied before the mechani- cally enforced end of the drop and the current is sampled twice: just before the onset of the pulse and just before its end. The pulse width is usually 10 to 20 % of the drop life. The drop dislodgement is synchronized with current sampling, which is carried out as in DPV. The ratio of faradaic current to charging current is enhanced and the negative influence of charging current is partially eliminated in the same way as in normal pulse voltammetry (NPV). Moreover, subtraction of the charging current sampled before the application of the pulse further decreases its negative influence. Due to the more enhanced signal (faradaic current) to noise (charging current) ratio, the limit of detection is lower than with NPV. The sensitivity of DPV depends on the reversibility of the electrode reaction of the analyte.
Iupacreferencehttps://doi.org/10.1515/pac-2018-0109Wikipediareferencehttps://en.wikipedia.org/wiki/Differential_pulse_voltammetry
Wikidatareference https://www.wikidata.org/wiki/Q5275361
Wikipediareferencehttps://en.wikipedia.org/wiki/Differential_pulse_voltammetryIupacreferencehttps://doi.org/10.1515/pac-2018-0109
Label
Comment
Preflabel DifferentialRefractiveIndex
Comment
Label DifferentialRefractiveIndex
CommentDifferential scanning calorimetry (DSC) is a thermoanalytical technique in which the difference in the amount of heat required to increase the temperature of a sample and reference is measured as a function of temperature. Both the sample and reference are maintained at nearly the same temperature throughout the experiment. Generally, the temperature program for a DSC analysis is designed such that the sample holder temperature increases linearly as a function of time. The reference sample should have a well-defined heat capacity over the range of temperatures to be scanned. Additionally, the reference sample must be stable, of high purity, and must not experience much change across the temperature scan. Typically, reference standards have been metals such as indium, tin, bismuth, and lead, but other standards such as polyethylene and fatty acids have been proposed to study polymers and organic compounds, respectively.
Comment
Preflabel DifferentialScanningCalorimetry
AltlabelDSC
Elucidation Differential scanning calorimetry (DSC) is a thermoanalytical technique in which the difference in the amount of heat required to increase the temperature of a sample and reference is measured as a function of temperature. Both the sample and reference are maintained at nearly the same temperature throughout the experiment. Generally, the temperature program for a DSC analysis is designed such that the sample holder temperature increases linearly as a function of time. The reference sample should have a well-defined heat capacity over the range of temperatures to be scanned. Additionally, the reference sample must be stable, of high purity, and must not experience much change across the temperature scan. Typically, reference standards have been metals such as indium, tin, bismuth, and lead, but other standards such as polyethylene and fatty acids have been proposed to study polymers and organic compounds, respectively.
AltlabelDSCCommentDifferential scanning calorimetry (DSC) is a thermoanalytical technique in which the difference in the amount of heat required to increase the temperature of a sample and reference is measured as a function of temperature. Both the sample and reference are maintained at nearly the same temperature throughout the experiment. Generally, the temperature program for a DSC analysis is designed such that the sample holder temperature increases linearly as a function of time. The reference sample should have a well-defined heat capacity over the range of temperatures to be scanned. Additionally, the reference sample must be stable, of high purity, and must not experience much change across the temperature scan. Typically, reference standards have been metals such as indium, tin, bismuth, and lead, but other standards such as polyethylene and fatty acids have been proposed to study polymers and organic compounds, respectively.
Label
CommentDifferential Pulse Voltammetry in which small potential pulses are superimposed onto a staircase potential ramp.
Comment
Preflabel DifferentialStaircasePulseVoltammetryDifferential Pulse Voltammetry in which small potential pulses are superimposed onto a staircase potential ramp.
CommentDifferential Pulse Voltammetry in which small potential pulses are superimposed onto a staircase potential ramp.
Label DifferentialStaircasePulseVoltammetry
CommentDifferential thermal analysis (DTA) is a thermoanalytic technique that is similar to differential scanning calorimetry. In DTA, the material under study and an inert reference are made to undergo identical thermal cycles, (i.e., same cooling or heating programme) while recording any temperature difference between sample and reference.[1] This differential temperature is then plotted against time, or against temperature (DTA curve, or thermogram). Changes in the sample, either exothermic or endothermic, can be detected relative to the inert reference. Thus, a DTA curve provides data on the transformations that have occurred, such as glass transitions, crystallization, melting and sublimation. The area under a DTA peak is the enthalpy change and is not affected by the heat capacity of the sample.
Comment
Preflabel DifferentialThermalAnalysis
AltlabelDTA
Elucidation Differential thermal analysis (DTA) is a thermoanalytic technique that is similar to differential scanning calorimetry. In DTA, the material under study and an inert reference are made to undergo identical thermal cycles, (i.e., same cooling or heating programme) while recording any temperature difference between sample and reference.[1] This differential temperature is then plotted against time, or against temperature (DTA curve, or thermogram). Changes in the sample, either exothermic or endothermic, can be detected relative to the inert reference. Thus, a DTA curve provides data on the transformations that have occurred, such as glass transitions, crystallization, melting and sublimation. The area under a DTA peak is the enthalpy change and is not affected by the heat capacity of the sample.
AltlabelDTACommentDifferential thermal analysis (DTA) is a thermoanalytic technique that is similar to differential scanning calorimetry. In DTA, the material under study and an inert reference are made to undergo identical thermal cycles, (i.e., same cooling or heating programme) while recording any temperature difference between sample and reference.[1] This differential temperature is then plotted against time, or against temperature (DTA curve, or thermogram). Changes in the sample, either exothermic or endothermic, can be detected relative to the inert reference. Thus, a DTA curve provides data on the transformations that have occurred, such as glass transitions, crystallization, melting and sublimation. The area under a DTA peak is the enthalpy change and is not affected by the heat capacity of the sample.
Label
CommentDilatometry is a method for characterising the dimensional changes of materials with variation of temperature conditions.PreflabelDilatometry
Comment
PreflabelDilatometryElucidationDilatometry is a method for characterising the dimensional changes of materials with variation of temperature conditions.
ElucidationComment Dilatometry is a method for characterising the dimensional changes of materials with variation of temperature conditions.
PreflabelDirectCoulometryAtControlledCurrent
Elucidationcoulometry at an imposed, constant current in the electrochemical cell
Comment Direct coulometry at controlled current is usually carried out in convective mass transfer mode. The end-point of the electrolysis, at which the current is stopped, must be determined either from the inflection point in the E–t curve or by using visual or objective end-point indi- cation, similar to volumetric methods. The total electric charge is calculated as the product of the constant current and time of electrolysis or can be measured directly using a coulometer.
PreflabelDirectCoulometryAtControlledCurrent
Elucidationcoulometry at an imposed, constant current in the electrochemical cell
Label DirectCoulometryAtControlledCurrent
PreflabelDirectCoulometryAtControlledPotential
Elucidationcoulometry at a preselected constant potential of the working electrode
Comment Direct coulometry at controlled potential is usually carried out in convective mass trans- fer mode using a large surface working electrode. Reference and auxiliary electrodes are placed in separate compartments. The total electric charge is obtained by integration of the I–t curve or can be measured directly using a coulometer.
PreflabelDirectCoulometryAtControlledPotential
Elucidationcoulometry at a preselected constant potential of the working electrode
Iupacreference https://doi.org/10.1515/pac-2018-0109
Commentmethod of determining the internal resistance of an electrochemical cell by applying a low current followed by higher current within a short period, and then record the changes of battery voltage and current
Comment
Preflabel DirectCurrentInternalResistancemethod of determining the internal resistance of an electrochemical cell by applying a low current followed by higher current within a short period, and then record the changes of battery voltage and current
Commentmethod of determining the internal resistance of an electrochemical cell by applying a low current followed by higher current within a short period, and then record the changes of battery voltage and current
Comment
Label DirectCurrentInternalResistance
CommentDynamic light scattering (DLS) is a technique in physics that can be used to determine the size distribution profile of small particles in suspension or polymers in solution. In the scope of DLS, temporal fluctuations are usually analyzed using the intensity or photon auto-correlation function (also known as photon correlation spectroscopy - PCS or quasi-elastic light scattering - QELS).PreflabelDynamicLightScattering
CommentAltlabelDLS
PreflabelDynamicLightScatteringElucidationDynamic light scattering (DLS) is a technique in physics that can be used to determine the size distribution profile of small particles in suspension or polymers in solution. In the scope of DLS, temporal fluctuations are usually analyzed using the intensity or photon auto-correlation function (also known as photon correlation spectroscopy - PCS or quasi-elastic light scattering - QELS).
ElucidationComment Dynamic light scattering (DLS) is a technique in physics that can be used to determine the size distribution profile of small particles in suspension or polymers in solution. In the scope of DLS, temporal fluctuations are usually analyzed using the intensity or photon auto-correlation function (also known as photon correlation spectroscopy - PCS or quasi-elastic light scattering - QELS).
AltlabelDLSComment
Label
CommentDynamic mechanical analysis (abbreviated DMA) is a characterisation technique where a sinusoidal stress is applied and the strain in the material is measured, allowing one to determine the complex modulus. The temperature of the sample or the frequency of the stress are often varied, leading to variations in the complex modulus; this approach can be used to locate the glass transition temperature[1] of the material, as well as to identify transitions corresponding to other molecular motions.
Comment
Preflabel DynamicMechanicalAnalysisDynamic mechanical analysis (abbreviated DMA) is a characterisation technique where a sinusoidal stress is applied and the strain in the material is measured, allowing one to determine the complex modulus. The temperature of the sample or the frequency of the stress are often varied, leading to variations in the complex modulus; this approach can be used to locate the glass transition temperature[1] of the material, as well as to identify transitions corresponding to other molecular motions.
CommentDynamic mechanical analysis (abbreviated DMA) is a characterisation technique where a sinusoidal stress is applied and the strain in the material is measured, allowing one to determine the complex modulus. The temperature of the sample or the frequency of the stress are often varied, leading to variations in the complex modulus; this approach can be used to locate the glass transition temperature[1] of the material, as well as to identify transitions corresponding to other molecular motions.
Comment
Label DynamicMechanicalAnalysis
CommentDynamic Mechanical Analysis (DMA) is a material characterization technique where a small deformation is applied to a sample in a cyclic manner. This allows measurement of the materials response to stress, temperature, frequency or time. The term is also used to refer to the analyzer that performs the test.PreflabelDynamicMechanicalSpectroscopy
CommentAltlabelDMA
PreflabelDynamicMechanicalSpectroscopyElucidationDynamic Mechanical Analysis (DMA) is a material characterization technique where a small deformation is applied to a sample in a cyclic manner. This allows measurement of the materials response to stress, temperature, frequency or time. The term is also used to refer to the analyzer that performs the test.
ElucidationComment Dynamic Mechanical Analysis (DMA) is a material characterization technique where a small deformation is applied to a sample in a cyclic manner. This allows measurement of the materials response to stress, temperature, frequency or time. The term is also used to refer to the analyzer that performs the test.
AltlabelDMAComment
Label
PreflabelElectrochemicalImpedanceSpectroscopy
AltlabelEIS
Elucidationelectrochemical measurement method of the complex impedance of an electrochemical system as a function of the frequency of a small amplitude (normally 5 to 10 mV) sinusoidal voltage perturbation superimposed on a fixed value of applied potential or on the open circuit potential
Comment Impedimetric sensors are based on measurement of a concentration-dependent parameter taken from analysis of the respective electrochemical impedance spectra, or from the impedance magnitudes at a chosen fixed frequency.
PreflabelElectrochemicalImpedanceSpectroscopy
Elucidationelectrochemical measurement method of the complex impedance of an electrochemical system as a function of the frequency of a small amplitude (normally 5 to 10 mV) sinusoidal voltage perturbation superimposed on a fixed value of applied potential or on the open circuit potential
AltlabelEISWikidatareferencehttps://www.wikidata.org/wiki/Q3492904
Iupacreference https://doi.org/10.1515/pac-2018-0109
Wikidatareferencehttps://www.wikidata.org/wiki/Q3492904
Label ElectrochemicalImpedanceSpectroscopy
PreflabelElectrochemicalPiezoelectricMicrogravimetry
ElucidationElectrogravimetry using an electrochemical quartz crystal microbalance.
Comment Electrogravimetry using an electrochemical quartz crystal microbalance.
PreflabelElectrochemicalPiezoelectricMicrogravimetry
ElucidationElectrogravimetry using an electrochemical quartz crystal microbalance.
Iupacreference https://doi.org/10.1515/pac-2018-0109Annotations
CommentIn electrochemical characterization, the measurement of potential, charge, or current is used to determine an analyte's concentration or to characterize an analyte's chemical reactivity
Comment
Preflabel ElectrochemicalTestingIn electrochemical characterization, the measurement of potential, charge, or current is used to determine an analyte's concentration or to characterize an analyte's chemical reactivity
CommentIn electrochemical characterization, the measurement of potential, charge, or current is used to determine an analyte's concentration or to characterize an analyte's chemical reactivity
Comment
Label ElectrochemicalTesting
CommentPreflabelElectrogravimetry
Elucidation method of electroanalytical chemistry used to separate by electrolyse ions of a substance and to derive the amount of this substance from the increase in mass of an electrode.
Commentmethod of electroanalytical chemistry used to separate by electrolyse ions of a substance and to derive the amount of this substance from the increase in mass of an electrode.
PreflabelElectrogravimetryComment
Elucidationmethod of electroanalytical chemistry used to separate by electrolyse ions of a substance and to derive the amount of this substance from the increase in mass of an electrode.Wikipediareferencehttps://en.wikipedia.org/wiki/Electrogravimetry
Wikidatareferencehttps://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-04-14
Wikipediareferencehttps://en.wikipedia.org/wiki/Electrogravimetry
Label Electrogravimetry
CommentElectron backscatter diffraction (EBSD) is a scanning electron microscopy (SEM) technique used to study the crystallographic structure of materials. EBSD is carried out in a scanning electron microscope equipped with an EBSD detector comprising at least a phosphorescent screen, a compact lens and a low-light camera. In this configuration, the SEM incident beam hits the tilted sample. As backscattered electrons leave the sample, they interact with the crystal's periodic atomic lattice planes and diffract according to Bragg's law at various scattering angles before reaching the phosphor screen forming Kikuchi patterns (EBSPs). EBSD spatial resolution depends on many factors, including the nature of the material under study and the sample preparation. Thus, EBSPs can be indexed to provide information about the material's grain structure, grain orientation, and phase at the micro-scale. EBSD is applied for impurities and defect studies, plastic deformation, and statistical analysis for average misorientation, grain size, and crystallographic texture. EBSD can also be combined with energy-dispersive X-ray spectroscopy (EDS), cathodoluminescence (CL), and wavelength-dispersive X-ray spectroscopy (WDS) for advanced phase identification and materials discovery.PreflabelElectronBackscatterDiffraction
CommentAltlabelEBSD
PreflabelElectronBackscatterDiffractionElucidationElectron backscatter diffraction (EBSD) is a scanning electron microscopy (SEM) technique used to study the crystallographic structure of materials. EBSD is carried out in a scanning electron microscope equipped with an EBSD detector comprising at least a phosphorescent screen, a compact lens and a low-light camera. In this configuration, the SEM incident beam hits the tilted sample. As backscattered electrons leave the sample, they interact with the crystal's periodic atomic lattice planes and diffract according to Bragg's law at various scattering angles before reaching the phosphor screen forming Kikuchi patterns (EBSPs). EBSD spatial resolution depends on many factors, including the nature of the material under study and the sample preparation. Thus, EBSPs can be indexed to provide information about the material's grain structure, grain orientation, and phase at the micro-scale. EBSD is applied for impurities and defect studies, plastic deformation, and statistical analysis for average misorientation, grain size, and crystallographic texture. EBSD can also be combined with energy-dispersive X-ray spectroscopy (EDS), cathodoluminescence (CL), and wavelength-dispersive X-ray spectroscopy (WDS) for advanced phase identification and materials discovery.
ElucidationComment Electron backscatter diffraction (EBSD) is a scanning electron microscopy (SEM) technique used to study the crystallographic structure of materials. EBSD is carried out in a scanning electron microscope equipped with an EBSD detector comprising at least a phosphorescent screen, a compact lens and a low-light camera. In this configuration, the SEM incident beam hits the tilted sample. As backscattered electrons leave the sample, they interact with the crystal's periodic atomic lattice planes and diffract according to Bragg's law at various scattering angles before reaching the phosphor screen forming Kikuchi patterns (EBSPs). EBSD spatial resolution depends on many factors, including the nature of the material under study and the sample preparation. Thus, EBSPs can be indexed to provide information about the material's grain structure, grain orientation, and phase at the micro-scale. EBSD is applied for impurities and defect studies, plastic deformation, and statistical analysis for average misorientation, grain size, and crystallographic texture. EBSD can also be combined with energy-dispersive X-ray spectroscopy (EDS), cathodoluminescence (CL), and wavelength-dispersive X-ray spectroscopy (WDS) for advanced phase identification and materials discovery.
AltlabelEBSDComment
Label
CommentElectron probe microanalysis (EPMA) is used for quantitative analysis of the elemental composition of solid specimens at a micrometer scale. The method uses bombardment of the specimen by keV electrons to excite characteristic X-rays from the sample, which are then detected by using wavelength-dispersive (WD) spectrometers.
Comment
Preflabel ElectronProbeMicroanalysisElectron probe microanalysis (EPMA) is used for quantitative analysis of the elemental composition of solid specimens at a micrometer scale. The method uses bombardment of the specimen by keV electrons to excite characteristic X-rays from the sample, which are then detected by using wavelength-dispersive (WD) spectrometers.
CommentElectron probe microanalysis (EPMA) is used for quantitative analysis of the elemental composition of solid specimens at a micrometer scale. The method uses bombardment of the specimen by keV electrons to excite characteristic X-rays from the sample, which are then detected by using wavelength-dispersive (WD) spectrometers.
Comment
Label ElectronProbeMicroanalysis
CommentEllipsometry is an optical technique that uses polarised light to probe the dielectric
properties of a sample (optical system). The common application of ellipsometry is
the analysis of thin films. Through the analysis of the state of polarisation of the
light that is reflected from the sample, ellipsometry yields information on the layers that are thinner than the wavelength of the light itself, down to a single atomic
layer or less. Depending on what is already known about the sample, the technique
can probe a range of properties including layer thickness, morphology, and chemical composition.
Comment
Preflabel EllipsometryEllipsometry is an optical technique that uses polarised light to probe the dielectric
properties of a sample (optical system). The common application of ellipsometry is
the analysis of thin films. Through the analysis of the state of polarisation of the
light that is reflected from the sample, ellipsometry yields information on the layers that are thinner than the wavelength of the light itself, down to a single atomic
layer or less. Depending on what is already known about the sample, the technique
can probe a range of properties including layer thickness, morphology, and chemical composition.
CommentEllipsometry is an optical technique that uses polarised light to probe the dielectric
properties of a sample (optical system). The common application of ellipsometry is
the analysis of thin films. Through the analysis of the state of polarisation of the
light that is reflected from the sample, ellipsometry yields information on the layers that are thinner than the wavelength of the light itself, down to a single atomic
layer or less. Depending on what is already known about the sample, the technique
can probe a range of properties including layer thickness, morphology, and chemical composition.
Comment
Label Ellipsometry
CommentAn analytical technique used for the elemental analysis or chemical characterization of a sample.
Comment
Preflabel EnergyDispersiveXraySpectroscopy
ElucidationAn analytical technique used for the elemental analysis or chemical characterization of a sample.
Altlabel EDS
Wikidatareferencehttps://www.wikidata.org/wiki/Q386334ElucidationAn analytical technique used for the elemental analysis or chemical characterization of a sample.
CommentAn analytical technique used for the elemental analysis or chemical characterization of a sample.
Comment
Wikipediareference https://en.wikipedia.org/wiki/Energy-dispersive_X-ray_spectroscopy
Wikidatareferencehttps://www.wikidata.org/wiki/Q386334
Label EnergyDispersiveXraySpectroscopy
CommentThe environmental scanning electron microscope (ESEM) is a scanning electron microscope (SEM) that allows for the option of collecting electron micrographs of specimens that are wet, uncoated, or both by allowing for a gaseous environment in the specimen chamber.
Comment
Preflabel EnvironmentalScanningElectronMicroscopyThe environmental scanning electron microscope (ESEM) is a scanning electron microscope (SEM) that allows for the option of collecting electron micrographs of specimens that are wet, uncoated, or both by allowing for a gaseous environment in the specimen chamber.
CommentThe environmental scanning electron microscope (ESEM) is a scanning electron microscope (SEM) that allows for the option of collecting electron micrographs of specimens that are wet, uncoated, or both by allowing for a gaseous environment in the specimen chamber.
Comment
Label EnvironmentalScanningElectronMicroscopy
Annotations
CommentExtended X-ray absorption fine structure (EXAFS), along with X-ray absorption near edge structure (XANES), is a subset of X-ray absorption spectroscopy (XAS). Like other absorption spectroscopies, XAS techniques follow Beer's law. The X-ray absorption coefficient of a material as a function of energy is obtained by directing X-rays of a narrow energy range at a sample, while recording the incident and transmitted x-ray intensity, as the incident x-ray energy is incremented.
When the incident x-ray energy matches the binding energy of an electron of an atom within the sample, the number of x-rays absorbed by the sample increases dramatically, causing a drop in the transmitted x-ray intensity. This results in an absorption edge. Every element has a set of unique absorption edges corresponding to different binding energies of its electrons, giving XAS element selectivity. XAS spectra are most often collected at synchrotrons because of the high intensity of synchrotron X-ray sources allow the concentration of the absorbing element to reach as low as a few parts per million. Absorption would be undetectable if the source is too weak. Because X-rays are highly penetrating, XAS samples can be gases, solids or liquids.
Comment
Preflabel ExafsElucidation Extended X-ray absorption fine structure (EXAFS), along with X-ray absorption near edge structure (XANES), is a subset of X-ray absorption spectroscopy (XAS). Like other absorption spectroscopies, XAS techniques follow Beer's law. The X-ray absorption coefficient of a material as a function of energy is obtained by directing X-rays of a narrow energy range at a sample, while recording the incident and transmitted x-ray intensity, as the incident x-ray energy is incremented.
When the incident x-ray energy matches the binding energy of an electron of an atom within the sample, the number of x-rays absorbed by the sample increases dramatically, causing a drop in the transmitted x-ray intensity. This results in an absorption edge. Every element has a set of unique absorption edges corresponding to different binding energies of its electrons, giving XAS element selectivity. XAS spectra are most often collected at synchrotrons because of the high intensity of synchrotron X-ray sources allow the concentration of the absorbing element to reach as low as a few parts per million. Absorption would be undetectable if the source is too weak. Because X-rays are highly penetrating, XAS samples can be gases, solids or liquids.
CommentExtended X-ray absorption fine structure (EXAFS), along with X-ray absorption near edge structure (XANES), is a subset of X-ray absorption spectroscopy (XAS). Like other absorption spectroscopies, XAS techniques follow Beer's law. The X-ray absorption coefficient of a material as a function of energy is obtained by directing X-rays of a narrow energy range at a sample, while recording the incident and transmitted x-ray intensity, as the incident x-ray energy is incremented.
When the incident x-ray energy matches the binding energy of an electron of an atom within the sample, the number of x-rays absorbed by the sample increases dramatically, causing a drop in the transmitted x-ray intensity. This results in an absorption edge. Every element has a set of unique absorption edges corresponding to different binding energies of its electrons, giving XAS element selectivity. XAS spectra are most often collected at synchrotrons because of the high intensity of synchrotron X-ray sources allow the concentration of the absorbing element to reach as low as a few parts per million. Absorption would be undetectable if the source is too weak. Because X-rays are highly penetrating, XAS samples can be gases, solids or liquids.
Comment
Label Exafs
CommentFatigue testing is a specialised form of mechanical testing that is performed by applying cyclic loading to a coupon or structure. These tests are used either to generate fatigue life and crack growth data, identify critical locations or demonstrate the safety of a structure that may be susceptible to fatigue.
Comment
Preflabel FatigueTestingFatigue testing is a specialised form of mechanical testing that is performed by applying cyclic loading to a coupon or structure. These tests are used either to generate fatigue life and crack growth data, identify critical locations or demonstrate the safety of a structure that may be susceptible to fatigue.
CommentFatigue testing is a specialised form of mechanical testing that is performed by applying cyclic loading to a coupon or structure. These tests are used either to generate fatigue life and crack growth data, identify critical locations or demonstrate the safety of a structure that may be susceptible to fatigue.
Comment
Label FatigueTesting
CommentThe FIB-DIC (Focused Ion Beam - Digital Image Correlation) ring-core technique is a powerful method for measuring residual stresses in materials. It is based on milling a ring-shaped sample, or core, from the material of interest using a focused ion beam (FIB).PreflabelFibDic
CommentAltlabelFIBDICResidualStressAnalysis
PreflabelFibDicElucidationThe FIB-DIC (Focused Ion Beam - Digital Image Correlation) ring-core technique is a powerful method for measuring residual stresses in materials. It is based on milling a ring-shaped sample, or core, from the material of interest using a focused ion beam (FIB).
ElucidationComment The FIB-DIC (Focused Ion Beam - Digital Image Correlation) ring-core technique is a powerful method for measuring residual stresses in materials. It is based on milling a ring-shaped sample, or core, from the material of interest using a focused ion beam (FIB).
AltlabelFIBDICResidualStressAnalysisComment
Label
CommentField emission scanning electron microscopy (FE-SEM) is an advanced technology used to capture the microstructure image of the materials. FE-SEM is typically performed in a high vacuum because gas molecules tend to disturb the electron beam and the emitted secondary and backscattered electrons used for imaging.PreflabelFieldEmissionScanningElectronMicroscopy
CommentAltlabelFE-SEM
PreflabelFieldEmissionScanningElectronMicroscopyElucidationField emission scanning electron microscopy (FE-SEM) is an advanced technology used to capture the microstructure image of the materials. FE-SEM is typically performed in a high vacuum because gas molecules tend to disturb the electron beam and the emitted secondary and backscattered electrons used for imaging.
ElucidationComment Field emission scanning electron microscopy (FE-SEM) is an advanced technology used to capture the microstructure image of the materials. FE-SEM is typically performed in a high vacuum because gas molecules tend to disturb the electron beam and the emitted secondary and backscattered electrons used for imaging.
AltlabelFE-SEMComment
Label
CommentA technique used to obtain an infrared spectrum of absorption or emission of a solid, liquid, or gas
Comment
Preflabel FourierTransformInfraredSpectroscopy
AltlabelFTIR
Elucidation A technique used to obtain an infrared spectrum of absorption or emission of a solid, liquid, or gas
AltlabelFTIRCommentA technique used to obtain an infrared spectrum of absorption or emission of a solid, liquid, or gas
Wikidatareferencehttps://www.wikidata.org/wiki/Q901559Comment
Wikipediareference https://en.wikipedia.org/wiki/Fourier-transform_infrared_spectroscopy
Wikidatareferencehttps://www.wikidata.org/wiki/Q901559
Label FourierTransformInfraredSpectroscopy
CommentFractography is the study of fracture surfaces in order to determine the relation between the microstructure and the mechanism(s) of crack initiation and propagation and, eventually, the root cause of the fracture .Fractography qualitatively interprets the mechanisms of fracture that occur in a sample by microscopic examination of fracture surface morpholog.
Comment
Preflabel FractographyFractography is the study of fracture surfaces in order to determine the relation between the microstructure and the mechanism(s) of crack initiation and propagation and, eventually, the root cause of the fracture .Fractography qualitatively interprets the mechanisms of fracture that occur in a sample by microscopic examination of fracture surface morpholog.
CommentFractography is the study of fracture surfaces in order to determine the relation between the microstructure and the mechanism(s) of crack initiation and propagation and, eventually, the root cause of the fracture .Fractography qualitatively interprets the mechanisms of fracture that occur in a sample by microscopic examination of fracture surface morpholog.
Comment
Label Fractography
CommentThe general principle of freezing point depression osmometry involves the relationship between the number of moles of dissolved solute in a solution and the change in freezing point.
Comment
Preflabel FreezingPointDepressionOsmometryThe general principle of freezing point depression osmometry involves the relationship between the number of moles of dissolved solute in a solution and the change in freezing point.
CommentThe general principle of freezing point depression osmometry involves the relationship between the number of moles of dissolved solute in a solution and the change in freezing point.
Comment
Label FreezingPointDepressionOsmometry
Commentelectrochemical method that applies current pulses to an electrochemical cell at rest and measures the voltage responsePreflabelGalvanostaticIntermittentTitrationTechnique
CommentAltlabelGITT
PreflabelGalvanostaticIntermittentTitrationTechniqueElucidationelectrochemical method that applies current pulses to an electrochemical cell at rest and measures the voltage response
ElucidationComment electrochemical method that applies current pulses to an electrochemical cell at rest and measures the voltage response
AltlabelGITTComment
Wikidatareference
CommentGamma-ray spectroscopy is the qualitative study of the energy spectra of gamma-ray sources, such as in the nuclear industry, geochemical investigation, and astrophysics.[1] Gamma-ray spectrometry, on the other hand, is the method used to acquire a quantitative spectrum measurement.[2]

Most radioactive sources produce gamma rays, which are of various energies and intensities. When these emissions are detected and analyzed with a spectroscopy system, a gamma-ray energy spectrum can be produced.

A detailed analysis of this spectrum is typically used to determine the identity and quantity of gamma emitters present in a gamma source, and is a vital tool in radiometric assay. The gamma spectrum is characteristic of the gamma-emitting nuclides contained in the source, just like in an optical spectrometer, the optical spectrum is characteristic of the material contained in a sample.
Comment
Preflabel GammaSpectrometryGamma-ray spectroscopy is the qualitative study of the energy spectra of gamma-ray sources, such as in the nuclear industry, geochemical investigation, and astrophysics.[1] Gamma-ray spectrometry, on the other hand, is the method used to acquire a quantitative spectrum measurement.[2]

Most radioactive sources produce gamma rays, which are of various energies and intensities. When these emissions are detected and analyzed with a spectroscopy system, a gamma-ray energy spectrum can be produced.

A detailed analysis of this spectrum is typically used to determine the identity and quantity of gamma emitters present in a gamma source, and is a vital tool in radiometric assay. The gamma spectrum is characteristic of the gamma-emitting nuclides contained in the source, just like in an optical spectrometer, the optical spectrum is characteristic of the material contained in a sample.
CommentGamma-ray spectroscopy is the qualitative study of the energy spectra of gamma-ray sources, such as in the nuclear industry, geochemical investigation, and astrophysics.[1] Gamma-ray spectrometry, on the other hand, is the method used to acquire a quantitative spectrum measurement.[2]

Most radioactive sources produce gamma rays, which are of various energies and intensities. When these emissions are detected and analyzed with a spectroscopy system, a gamma-ray energy spectrum can be produced.

A detailed analysis of this spectrum is typically used to determine the identity and quantity of gamma emitters present in a gamma source, and is a vital tool in radiometric assay. The gamma spectrum is characteristic of the gamma-emitting nuclides contained in the source, just like in an optical spectrometer, the optical spectrum is characteristic of the material contained in a sample.
Comment
Label GammaSpectrometry
CommentGas Adsorption Porosimetry is a method used for analyzing the surface area and porosity of materials. In this method, a gas, typically nitrogen or argon, is adsorbed onto the surface of the material at various pressures and temperatures.
CommentPreflabelGasAdsorptionPorosimetry
PreflabelAltlabel GasAdsorptionPorosimetry
AltlabelGasAdsorptionPorosimetryCommentGas Adsorption Porosimetry is a method used for analyzing the surface area and porosity of materials. In this method, a gas, typically nitrogen or argon, is adsorbed onto the surface of the material at various pressures and temperatures.
Comment
Label
Commentelectrochemical method that measures the voltage drop of a cell resulting from a square wave current loadPreflabelHPPC
CommentAltlabelHybridPulsePowerCharacterisation
PreflabelHPPCAltlabelHybridPulsePowerCharacterization
Elucidation electrochemical method that measures the voltage drop of a cell resulting from a square wave current load
AltlabelHybridPulsePowerCharacterisationCommentelectrochemical method that measures the voltage drop of a cell resulting from a square wave current load
AltlabelHybridPulsePowerCharacterizationComment
Label
CommentA test to determine the resistance a material exhibits to permanent deformation by penetration of another harder material.
Comment
Preflabel HardnessTestingA test to determine the resistance a material exhibits to permanent deformation by penetration of another harder material.
CommentA test to determine the resistance a material exhibits to permanent deformation by penetration of another harder material.
Comment
Label HardnessTestingAnnotations
Comment
Preflabel HardwareManufacturer
Comment
Label HardwareManufacturer
Comment
Preflabel HardwareModel
Comment
Label HardwareModelAnnotations
CommentSet of inherent properties of a substance, mixture of substances, or a process involving substances that, under production, usage, or disposal conditions, make it capable of causing adverse effects to organisms or the environment, depending on the degree of exposure; in other words, it is a source of danger.
Comment
Preflabel HazardSet of inherent properties of a substance, mixture of substances, or a process involving substances that, under production, usage, or disposal conditions, make it capable of causing adverse effects to organisms or the environment, depending on the degree of exposure; in other words, it is a source of danger.
CommentSet of inherent properties of a substance, mixture of substances, or a process involving substances that, under production, usage, or disposal conditions, make it capable of causing adverse effects to organisms or the environment, depending on the degree of exposure; in other words, it is a source of danger.
Comment
Label HazardAnnotations
CommentAn object which supports the specimen in the correct position for the characterisation process.
Comment
Preflabel HolderAn object which supports the specimen in the correct position for the characterisation process.
CommentAn object which supports the specimen in the correct position for the characterisation process.
Comment
Label HolderAnnotations
PreflabelHydrodynamicVoltammetry
Elucidationvoltammetry with forced flow of the solution towards the electrode surface
Comment A linear potential scan, at sufficiently slow scan rates so as to ensure a steady state response, is usually applied.
PreflabelHydrodynamicVoltammetry
Elucidationvoltammetry with forced flow of the solution towards the electrode surface
Iupacreferencehttps://doi.org/10.1515/pac-2018-0109Wikipediareferencehttps://en.wikipedia.org/wiki/Hydrodynamic_voltammetry
Wikidatareference https://www.wikidata.org/wiki/Q17028237
Wikipediareferencehttps://en.wikipedia.org/wiki/Hydrodynamic_voltammetryIupacreferencehttps://doi.org/10.1515/pac-2018-0109
Label
Commentelectrochemical method that measures the voltage response of an electrochemical cell under galvanostatic conditions to short interruptions in the currentPreflabelICI
CommentAltlabelIntermittentCurrentInterruptionMethod
PreflabelICIElucidationelectrochemical method that measures the voltage response of an electrochemical cell under galvanostatic conditions to short interruptions in the current
ElucidationComment electrochemical method that measures the voltage response of an electrochemical cell under galvanostatic conditions to short interruptions in the current
AltlabelIntermittentCurrentInterruptionMethodComment
Label
Commentmeasurement principle in which the complex electric impedance of a system is measured, usually as a function of a small amplitude sinusoidal electrode potential
Comment
Preflabel Impedimetrymeasurement principle in which the complex electric impedance of a system is measured, usually as a function of a small amplitude sinusoidal electrode potential
Commentmeasurement principle in which the complex electric impedance of a system is measured, usually as a function of a small amplitude sinusoidal electrode potential
Comment
Iupacreference https://doi.org/10.1515/pac-2018-0109
PreflabelInteractionVolume
ElucidationThe volume of material, and the surrounding environment, that interacts with the probe and generate a detectable (measurable) signal (information).
Comment In some cases, (like tribological characterisations) the “sample” can also be the “probe”. When analysing a system of samples that interact each other, finding a clear definition can become a complex problem.
PreflabelInteractionVolume
ElucidationThe volume of material, and the surrounding environment, that interacts with the probe and generate a detectable (measurable) signal (information).
Example In Scanning Electron Microscopy (SEM), the interaction volume is the volume of material that interacts directly with the incident electron beam, is usually much smaller than the entire specimen’s volume, and can be computed by using proper models. The interaction between the scanning probe and the sample generates a series of detectable signals (back scattered electrons, secondary electrons, x-rays, specimen current, etc.) which contain information on sample morphology, microstructure, composition, etc.
Comment
Preflabel IntermediateSample
Comment
Label IntermediateSample
CommentIon chromatography (or ion-exchange chromatography) is a form of chromatography that separates ions and ionizable polar molecules based on their affinity to the ion exchanger.
Comment
Preflabel IonChromatographyIon chromatography (or ion-exchange chromatography) is a form of chromatography that separates ions and ionizable polar molecules based on their affinity to the ion exchanger.
CommentIon chromatography (or ion-exchange chromatography) is a form of chromatography that separates ions and ionizable polar molecules based on their affinity to the ion exchanger.
Comment
Wikipediareference https://en.wikipedia.org/wiki/Ion_chromatography
CommentIon mobility spectrometry (IMS) It is a method of conducting analytical research that separates and identifies ionized molecules present in the gas phase based on the mobility of the molecules in a carrier buffer gas. Even though it is used extensively for military or security objectives, such as detecting drugs and explosives, the technology also has many applications in laboratory analysis, including studying small and big biomolecules. IMS instruments are extremely sensitive stand-alone devices, but are often coupled with mass spectrometry, gas chromatography or high-performance liquid chromatography in order to achieve a multi-dimensional separation. They come in various sizes, ranging from a few millimeters to several meters depending on the specific application, and are capable of operating under a broad range of conditions. IMS instruments such as microscale high-field asymmetric-waveform ion mobility spectrometry can be palm-portable for use in a range of applications including volatile organic compound (VOC) monitoring, biological sample analysis, medical diagnosis and food quality monitoring.PreflabelIonMobilitySpectrometry
CommentAltlabelIMS
PreflabelIonMobilitySpectrometryElucidationIon mobility spectrometry (IMS) It is a method of conducting analytical research that separates and identifies ionized molecules present in the gas phase based on the mobility of the molecules in a carrier buffer gas. Even though it is used extensively for military or security objectives, such as detecting drugs and explosives, the technology also has many applications in laboratory analysis, including studying small and big biomolecules. IMS instruments are extremely sensitive stand-alone devices, but are often coupled with mass spectrometry, gas chromatography or high-performance liquid chromatography in order to achieve a multi-dimensional separation. They come in various sizes, ranging from a few millimeters to several meters depending on the specific application, and are capable of operating under a broad range of conditions. IMS instruments such as microscale high-field asymmetric-waveform ion mobility spectrometry can be palm-portable for use in a range of applications including volatile organic compound (VOC) monitoring, biological sample analysis, medical diagnosis and food quality monitoring.
ElucidationComment Ion mobility spectrometry (IMS) It is a method of conducting analytical research that separates and identifies ionized molecules present in the gas phase based on the mobility of the molecules in a carrier buffer gas. Even though it is used extensively for military or security objectives, such as detecting drugs and explosives, the technology also has many applications in laboratory analysis, including studying small and big biomolecules. IMS instruments are extremely sensitive stand-alone devices, but are often coupled with mass spectrometry, gas chromatography or high-performance liquid chromatography in order to achieve a multi-dimensional separation. They come in various sizes, ranging from a few millimeters to several meters depending on the specific application, and are capable of operating under a broad range of conditions. IMS instruments such as microscale high-field asymmetric-waveform ion mobility spectrometry can be palm-portable for use in a range of applications including volatile organic compound (VOC) monitoring, biological sample analysis, medical diagnosis and food quality monitoring.
AltlabelIMSComment
Label
CommentIsothermal microcalorimetry (IMC) is a laboratory method for real-time monitoring and dynamic analysis of chemical, physical and biological processes. Over a period of hours or days, IMC determines the onset, rate, extent and energetics of such processes for specimens in small ampoules (e.g. 3–20 ml) at a constant set temperature (c. 15 °C–150 °C).

IMC accomplishes this dynamic analysis by measuring and recording vs. elapsed time the net rate of heat flow (μJ/s = μW) to or from the specimen ampoule, and the cumulative amount of heat (J) consumed or produced.		PreflabelIsothermalMicrocalorimetry
CommentAltlabelIMC
PreflabelIsothermalMicrocalorimetryElucidationIsothermal microcalorimetry (IMC) is a laboratory method for real-time monitoring and dynamic analysis of chemical, physical and biological processes. Over a period of hours or days, IMC determines the onset, rate, extent and energetics of such processes for specimens in small ampoules (e.g. 3–20 ml) at a constant set temperature (c. 15 °C–150 °C).

IMC accomplishes this dynamic analysis by measuring and recording vs. elapsed time the net rate of heat flow (μJ/s = μW) to or from the specimen ampoule, and the cumulative amount of heat (J) consumed or produced.
ElucidationComment Isothermal microcalorimetry (IMC) is a laboratory method for real-time monitoring and dynamic analysis of chemical, physical and biological processes. Over a period of hours or days, IMC determines the onset, rate, extent and energetics of such processes for specimens in small ampoules (e.g. 3–20 ml) at a constant set temperature (c. 15 °C–150 °C).

IMC accomplishes this dynamic analysis by measuring and recording vs. elapsed time the net rate of heat flow (μJ/s = μW) to or from the specimen ampoule, and the cumulative amount of heat (J) consumed or produced.
AltlabelIMCComment
Label
CommentThe laboratory where the whole characterisation process or some of its stages take place.
Preflabel LaboratoryThe laboratory where the whole characterisation process or some of its stages take place.
CommentThe laboratory where the whole characterisation process or some of its stages take place.
Label Laboratory
CommentDescribes the level of automation of the test.
Comment
Preflabel LevelOfAutomationDescribes the level of automation of the test.
CommentDescribes the level of automation of the test.
Comment
Label LevelOfAutomation
CommentDescribes the level of expertise required to carry out a process (the entire test or the data processing).
Comment
Preflabel LevelOfExpertiseDescribes the level of expertise required to carry out a process (the entire test or the data processing).
CommentDescribes the level of expertise required to carry out a process (the entire test or the data processing).
Comment
Label LevelOfExpertise
CommentLight scattering is the way light behaves when it interacts with a medium that contains particles or the boundary between different mediums where defects or structures are present. It is different than the effects of refraction, where light undergoes a change in index of refraction as it passes from one medium to another, or reflection, where light reflects back into the same medium, both of which are governed by Snell’s law. Light scattering can be caused by factors such as the nature, texture, or specific structures of a surface and the presence of gas, liquid, or solid particles through which light propagates, as well as the nature of the light itself, of its wavelengths and polarization states. It usually results in diffuse light and can also affect the dispersion of color.
Comment
Preflabel LightScatteringLight scattering is the way light behaves when it interacts with a medium that contains particles or the boundary between different mediums where defects or structures are present. It is different than the effects of refraction, where light undergoes a change in index of refraction as it passes from one medium to another, or reflection, where light reflects back into the same medium, both of which are governed by Snell’s law. Light scattering can be caused by factors such as the nature, texture, or specific structures of a surface and the presence of gas, liquid, or solid particles through which light propagates, as well as the nature of the light itself, of its wavelengths and polarization states. It usually results in diffuse light and can also affect the dispersion of color.
CommentLight scattering is the way light behaves when it interacts with a medium that contains particles or the boundary between different mediums where defects or structures are present. It is different than the effects of refraction, where light undergoes a change in index of refraction as it passes from one medium to another, or reflection, where light reflects back into the same medium, both of which are governed by Snell’s law. Light scattering can be caused by factors such as the nature, texture, or specific structures of a surface and the presence of gas, liquid, or solid particles through which light propagates, as well as the nature of the light itself, of its wavelengths and polarization states. It usually results in diffuse light and can also affect the dispersion of color.
Comment
Label LightScattering
Commentchronopotentiometry where the applied current is changed linearly
Comment
Preflabel LinearChronopotentiometrychronopotentiometry where the applied current is changed linearly
Commentchronopotentiometry where the applied current is changed linearly
Comment
Label LinearChronopotentiometry
CommentLSV corresponds to the first half cycle of cyclic voltammetry.PreflabelLinearScanVoltammetry
CommentThe peak current is expressed by the Randles-Ševčík equation.AltlabelLSV
CommentThe scan is usually started at a potential where no electrode reaction occurs.AltlabelLinearPolarization
CommentVoltammetry in which the current is recorded as the electrode potential is varied linearly with time.AltlabelLinearSweepVoltammetry
CommentElucidationVoltammetry in which the current is recorded as the electrode potential is varied linearly with time.
PreflabelLinearScanVoltammetryCommentLSV corresponds to the first half cycle of cyclic voltammetry.
ElucidationVoltammetry in which the current is recorded as the electrode potential is varied linearly with time.CommentThe peak current is expressed by the Randles-Ševčík equation.
AltlabelLSVCommentThe scan is usually started at a potential where no electrode reaction occurs.
AltlabelLinearPolarizationCommentVoltammetry in which the current is recorded as the electrode potential is varied linearly with time.
AltlabelLinearSweepVoltammetryComment
Iupacreferencehttps://doi.org/10.1515/pac-2018-0109Wikipediareferencehttps://en.wikipedia.org/wiki/Linear_sweep_voltammetry
Wikidatareference https://www.wikidata.org/wiki/Q620700
Wikipediareferencehttps://en.wikipedia.org/wiki/Linear_sweep_voltammetryIupacreferencehttps://doi.org/10.1515/pac-2018-0109
Label
CommentMass spectrometry is a powerful analytical technique used to quantify known materials, to identify unknown compounds within a sample, and to elucidate the structure and chemical properties of different molecules.
Comment
Preflabel MassSpectrometryMass spectrometry is a powerful analytical technique used to quantify known materials, to identify unknown compounds within a sample, and to elucidate the structure and chemical properties of different molecules.
CommentMass spectrometry is a powerful analytical technique used to quantify known materials, to identify unknown compounds within a sample, and to elucidate the structure and chemical properties of different molecules.
Comment
Label MassSpectrometry
CommentApplication of a post-processing model to signals through a software, in order to calculate the final characterisation property.
Comment
Preflabel MeasurementDataPostProcessingApplication of a post-processing model to signals through a software, in order to calculate the final characterisation property.
CommentApplication of a post-processing model to signals through a software, in order to calculate the final characterisation property.
Comment
Example Analysis of SEM (or optical) images to gain additional information (image filtering/integration/averaging, microstructural analysis, grain size evaluation, Digital Image Correlation procedures, etc.)Annotations
CommentDescribes the main input parameters that are needed to acquire the signal
Comment
Preflabel MeasurementParameterDescribes the main input parameters that are needed to acquire the signal
CommentDescribes the main input parameters that are needed to acquire the signal
Comment
Label MeasurementParameter
PreflabelMeasurementSystemAdjustment
ElucidationActivity which has the goal of adjusting/tuning a measing instrument, without performing a measurement on a reference sample (which is a calibration).
The output of this process can be a specific measurement parameter to be used in the characteriasation measurement process.
Comment Activity which has the goal of adjusting/tuning a measing instrument, without performing a measurement on a reference sample (which is a calibration).
The output of this process can be a specific measurement parameter to be used in the characteriasation measurement process.
PreflabelMeasurementSystemAdjustment
ElucidationActivity which has the goal of adjusting/tuning a measing instrument, without performing a measurement on a reference sample (which is a calibration).
The output of this process can be a specific measurement parameter to be used in the characteriasation measurement process.		DefinitionSet of operations carried out on a measuring system so that it provides prescribed indications corresponding to given values of a quantity being measured
NOTE 1 If there is any doubt that the context in which the term is being used is that of metrology, the long form
“adjustment of a measuring system” might be used.
NOTE 2 Types of adjustment of a measuring system include zero adjustment, offset adjustment, and span adjustment
(sometimes called “gain adjustment”).
NOTE 3 Adjustment of a measuring system should not be confused with calibration, which is sometimes a prerequisite
for adjustment.
NOTE 4 After an adjustment of a measuring system, the measuring system must usually be recalibrated.

-- International Vocabulary of Metrology(VIM)
Vimterm Adjustment
DefinitionSet of operations carried out on a measuring system so that it provides prescribed indications corresponding to given values of a quantity being measured
NOTE 1 If there is any doubt that the context in which the term is being used is that of metrology, the long form
“adjustment of a measuring system” might be used.
NOTE 2 Types of adjustment of a measuring system include zero adjustment, offset adjustment, and span adjustment
(sometimes called “gain adjustment”).
NOTE 3 Adjustment of a measuring system should not be confused with calibration, which is sometimes a prerequisite
for adjustment.
NOTE 4 After an adjustment of a measuring system, the measuring system must usually be recalibrated.

-- International Vocabulary of Metrology(VIM)
Label MeasurementSystemAdjustment
CommentThe overall time needed to acquire the measurement data
Comment
Preflabel MeasurementTimeThe overall time needed to acquire the measurement data
CommentThe overall time needed to acquire the measurement data
Comment
Label MeasurementTime
CommentMechanical testing covers a wide range of tests, which can be divided broadly into two types:
1. those that aim to determine a material's mechanical properties, independent of geometry.
2. those that determine the response of a structure to a given action, e.g. testing of composite beams, aircraft structures to destruction, etc.
Comment
Preflabel MechanicalTestingMechanical testing covers a wide range of tests, which can be divided broadly into two types:
1. those that aim to determine a material's mechanical properties, independent of geometry.
2. those that determine the response of a structure to a given action, e.g. testing of composite beams, aircraft structures to destruction, etc.
CommentMechanical testing covers a wide range of tests, which can be divided broadly into two types:
1. those that aim to determine a material's mechanical properties, independent of geometry.
2. those that determine the response of a structure to a given action, e.g. testing of composite beams, aircraft structures to destruction, etc.
Comment
Wikipediareference https://en.wikipedia.org/wiki/Mechanical_testing
CommentIn the membrane osmometry technique, a pure solvent and polymer solution are separated by a semipermeable membrane, due to the higher chemical potential of the solvent in the pure solvent than in polymer solution, the solvent starts moving towards the polymer solution.
Comment
Preflabel MembraneOsmometryIn the membrane osmometry technique, a pure solvent and polymer solution are separated by a semipermeable membrane, due to the higher chemical potential of the solvent in the pure solvent than in polymer solution, the solvent starts moving towards the polymer solution.
CommentIn the membrane osmometry technique, a pure solvent and polymer solution are separated by a semipermeable membrane, due to the higher chemical potential of the solvent in the pure solvent than in polymer solution, the solvent starts moving towards the polymer solution.
Comment
Label MembraneOsmometry
Commenta method used to measure the pore size distribution and total pore volume of solid materials by infiltrating mercury into the pores under controlled pressure conditions and analyzing the amount of mercury intrusion
Comment
Preflabel MercuryPorosimetrya method used to measure the pore size distribution and total pore volume of solid materials by infiltrating mercury into the pores under controlled pressure conditions and analyzing the amount of mercury intrusion
Commenta method used to measure the pore size distribution and total pore volume of solid materials by infiltrating mercury into the pores under controlled pressure conditions and analyzing the amount of mercury intrusion
Comment
Label MercuryPorosimetry
CommentMicroscopy is a category of characterization techniques which probe and map the surface and sub-surface structure of a material. These techniques can use photons, electrons, ions or physical cantilever probes to gather data about a sample's structure on a range of length scales.
Comment
Preflabel MicroscopyMicroscopy is a category of characterization techniques which probe and map the surface and sub-surface structure of a material. These techniques can use photons, electrons, ions or physical cantilever probes to gather data about a sample's structure on a range of length scales.
CommentMicroscopy is a category of characterization techniques which probe and map the surface and sub-surface structure of a material. These techniques can use photons, electrons, ions or physical cantilever probes to gather data about a sample's structure on a range of length scales.
Comment
Label Microscopy
CommentNanoindentation (known also as nanoindentation test) is a method for testing the hardness and related mechanical properties of materials, facilitated by high-precision instrumentation in the nanometer scale, as well as analytical and computational algorithms for result evaluation.
Comment
Preflabel NanoindentationNanoindentation (known also as nanoindentation test) is a method for testing the hardness and related mechanical properties of materials, facilitated by high-precision instrumentation in the nanometer scale, as well as analytical and computational algorithms for result evaluation.
CommentNanoindentation (known also as nanoindentation test) is a method for testing the hardness and related mechanical properties of materials, facilitated by high-precision instrumentation in the nanometer scale, as well as analytical and computational algorithms for result evaluation.
Comment
Example By definition, when someone performs nanoindentation, it refers to either quasistatic or continuous stiffness measurement. However, in reality with a nanoindenter it is also possible to perform scratch testing, scanning probe microscopy, and apply non-contact surface energy mapping, which can also be called nanoindentation, because they are measurements conducted using an nanoindenter.
CommentNeutron spin echo spectroscopy is a high resolution inelastic neutron scattering method probing nanosecond dynamics. Neutron spin echo (NSE) spectroscopy uses the precession of neutron spins in a magnetic field to measure the energy transfer at the sample and decouples the energy resolution from beam characteristics like monochromatisation and collimation.PreflabelNeutronSpinEchoSpectroscopy
CommentAltlabelNSE
PreflabelNeutronSpinEchoSpectroscopyElucidationNeutron spin echo spectroscopy is a high resolution inelastic neutron scattering method probing nanosecond dynamics. Neutron spin echo (NSE) spectroscopy uses the precession of neutron spins in a magnetic field to measure the energy transfer at the sample and decouples the energy resolution from beam characteristics like monochromatisation and collimation.
ElucidationComment Neutron spin echo spectroscopy is a high resolution inelastic neutron scattering method probing nanosecond dynamics. Neutron spin echo (NSE) spectroscopy uses the precession of neutron spins in a magnetic field to measure the energy transfer at the sample and decouples the energy resolution from beam characteristics like monochromatisation and collimation.
AltlabelNSEComment
LabelAnnotations
CommentNear edge X-ray absorption fine structure (NEXAFS), also known as X-ray absorption near edge structure (XANES), is a type of absorption spectroscopy that indicates the features in the X-ray absorption spectra (XAS) of condensed matter due to the photoabsorption cross section for electronic transitions from an atomic core level to final states in the energy region of 50–100 eV above the selected atomic core level ionization energy, where the wavelength of the photoelectron is larger than the interatomic distance between the absorbing atom and its first neighbour atoms.
Comment
Preflabel NexafsNear edge X-ray absorption fine structure (NEXAFS), also known as X-ray absorption near edge structure (XANES), is a type of absorption spectroscopy that indicates the features in the X-ray absorption spectra (XAS) of condensed matter due to the photoabsorption cross section for electronic transitions from an atomic core level to final states in the energy region of 50–100 eV above the selected atomic core level ionization energy, where the wavelength of the photoelectron is larger than the interatomic distance between the absorbing atom and its first neighbour atoms.
CommentNear edge X-ray absorption fine structure (NEXAFS), also known as X-ray absorption near edge structure (XANES), is a type of absorption spectroscopy that indicates the features in the X-ray absorption spectra (XAS) of condensed matter due to the photoabsorption cross section for electronic transitions from an atomic core level to final states in the energy region of 50–100 eV above the selected atomic core level ionization energy, where the wavelength of the photoelectron is larger than the interatomic distance between the absorbing atom and its first neighbour atoms.
Comment
Label Nexafs
- - + + + + + + + + + + + + + - + + @@ -5612,18 +5344,6 @@

NormalPulseVoltammetryComment

- - - - - - - - - - - - @@ -5651,28 +5371,28 @@

NuclearMagneticResonanceAnnotations

- - + + - - + + - - + + - - + + - - + + @@ -5697,24 +5417,24 @@

OpenCircuitHoldAnnotations

- - + + - - + + - - + + - + - - + + @@ -5738,14 +5458,6 @@

Operator

- - - - - - - - @@ -5754,6 +5466,14 @@

Operator

+ + + + + + + + @@ -5784,14 +5504,6 @@

OpticalMicroscopyAnnotations

- - - - - - - - @@ -5800,6 +5512,14 @@

OpticalMicroscopyElucidation

+ + + + + + + + @@ -5822,14 +5542,14 @@

OpticalTestingAnnotations

- - - - + + + + @@ -5852,14 +5572,6 @@

OsmometryAnnotations

- - - - - - - - @@ -5868,6 +5580,14 @@

OsmometryElucidation

+ + + + + + + + @@ -5890,14 +5610,6 @@

PhotoluminescenceMicroscopyAnnotations

- - - - - - - - @@ -5906,6 +5618,14 @@

PhotoluminescenceMicroscopyElucidation

+ + + + + + + + @@ -5928,14 +5648,6 @@

PhysicsOfInteraction

- - - - - - - - @@ -5944,6 +5656,14 @@

PhysicsOfInteractionElucidation

+ + + + + + + + @@ -5974,14 +5694,14 @@

PorosimetryAnnotations

- - - - + + + + @@ -6005,11 +5725,11 @@

PostProcessingModelAnnotations

- - + + - + @@ -6018,15 +5738,15 @@

PostProcessingModelComment -

+ - - + + - - + + @@ -6050,6 +5770,18 @@

PotentiometricStrippingAnalysisAnnotations

+ + + + + + + + + + + + @@ -6074,18 +5806,6 @@

PotentiometricStrippingAnalysisComment

- - - - - - - - - - - - @@ -6108,6 +5828,14 @@

PotentiometryAnnotations

+ + + + + + + + @@ -6125,21 +5853,13 @@

Potentiometry

- - - - - - + + - - - - @@ -6166,14 +5886,6 @@

PreparedSampleAnnotations

- - - - - - - - @@ -6182,6 +5894,14 @@

PreparedSampleElucidation

+ + + + + + + + @@ -6204,14 +5924,6 @@

PrimaryDataAnnotations

- - - - - - - - @@ -6220,6 +5932,14 @@

PrimaryDataElucidation

+ + + + + + + + @@ -6254,14 +5974,6 @@

Probe

- - - - - - - - @@ -6270,6 +5982,14 @@

Probe

+ + + + + + + + @@ -6312,14 +6032,6 @@

ProbeSampleInteraction

- - - - - - - - @@ -6328,6 +6040,14 @@

ProbeSampleInteractionElucidation

+ + + + + + + + @@ -6358,14 +6078,6 @@

ProcessingReproducibilityAnnotations

- - - - - - - - @@ -6374,6 +6086,14 @@

ProcessingReproducibilityElucidation

+ + + + + + + + @@ -6396,14 +6116,6 @@

ProfilometryAnnotations

- - - - - - - - @@ -6412,6 +6124,14 @@

ProfilometryElucidation

+ + + + + + + + @@ -6435,24 +6155,24 @@

PseudoOpenCircuitVoltageMethodAnnotations

- - + + - - + + - - + + - + - - + + @@ -6476,14 +6196,6 @@

PulsedElectroacousticMethodAnnotations

- - - - - - - - @@ -6492,6 +6204,14 @@

PulsedElectroacousticMethodElucidation

+ + + + + + + + @@ -6518,14 +6238,6 @@

RamanSpectroscopyAnnotations

- - - - - - - - @@ -6534,6 +6246,14 @@

RamanSpectroscopyElucidation

+ + + + + + + + @@ -6556,10 +6276,6 @@

RationaleAnnotations

- - - - @@ -6568,6 +6284,10 @@

RationaleElucidation

+ + + + @@ -6591,32 +6311,32 @@

RawData

- - + + - + - - + + - + - - + + - - + + - - + + @@ -6652,14 +6372,14 @@

RawSampleAnnotations

- - - - + + + + @@ -6683,40 +6403,36 @@

ReferenceSampleAnnotations

- - + + - - + + - - + + - - + + - - - - - - + + - - + + - - + + @@ -6726,6 +6442,10 @@

ReferenceSampleDefinition

+ + + + @@ -6749,32 +6469,32 @@

SampleAnnotations

- - + + - - + + - - + + - - + + - - + + - - + + @@ -6798,14 +6518,6 @@

SampleInspectionAnnotations

- - - - - - - - @@ -6814,6 +6526,14 @@

SampleInspectionElucidation

+ + + + + + + + @@ -6840,14 +6560,14 @@

SampleInspectionInstrumentAnnotations

- - - - + + + + @@ -6870,14 +6590,6 @@

SampleInspectionParameterAnnotations

- - - - - - - - @@ -6886,6 +6598,14 @@

SampleInspectionParameterElucidation

+ + + + + + + + @@ -6905,16 +6625,8 @@

SamplePreparationIri

- - - - - - - - - - + + @@ -6924,6 +6636,14 @@

SamplePreparationElucidation

+ + + + + + + + @@ -6958,14 +6678,14 @@

SamplePreparationInstrumentAnnotations

- - - - + + + + @@ -6988,14 +6708,6 @@

SamplePreparationParameterAnnotations

- - - - - - - - @@ -7004,6 +6716,14 @@

SamplePreparationParameterElucidation

+ + + + + + + + @@ -7027,28 +6747,28 @@

SampledDCPolarographyAnnotations

- - + + - - + + - - + + - - + + - - + + - - + + @@ -7077,11 +6797,11 @@

SamplingProcessAnnotations

- - + + - + @@ -7090,15 +6810,15 @@

SamplingProcessComment -

+ - - + + - - + + @@ -7123,24 +6843,24 @@

ScanningAugerElectronMicroscopyAnnotations

- - + + - - + + - - + + - + - - + + @@ -7165,24 +6885,24 @@

ScanningElectronMicroscopyAnnotations

- - + + - - + + - - + + - + - - + + @@ -7207,24 +6927,24 @@

ScanningKelvinProbeAnnotations

- - + + - - + + - - + + - + - - + + @@ -7248,14 +6968,6 @@

ScanningProbeMicroscopy

- - - - - - - - @@ -7264,6 +6976,14 @@

ScanningProbeMicroscopyElucidation

+ + + + + + + + @@ -7287,24 +7007,24 @@

ScanningTunnelingMicroscopyAnnotations

- - + + - - + + - - + + - + - - + + @@ -7328,14 +7048,14 @@

ScatteringAndDiffractionAnnotations

- - - - + + + + @@ -7359,24 +7079,24 @@

SecondaryDataAnnotations

- - + + - - + + - - + + - + - - + + @@ -7409,24 +7129,24 @@

SecondaryIonMassSpectrometryAnnotations

- - + + - - + + - - + + - + - - + + @@ -7450,14 +7170,14 @@

ShearOrTorsionTesting

- - - - + + + + @@ -7480,6 +7200,14 @@

Signal

+ + + + + + + + @@ -7500,14 +7228,6 @@

SignalComment

- - - - - - - - @@ -7534,14 +7254,6 @@

SpectrometryAnnotations

- - - - - - - - @@ -7550,6 +7262,14 @@

SpectrometryElucidation

+ + + + + + + + @@ -7569,16 +7289,8 @@

SpectroscopyIri

- - - - - - - - - - + + @@ -7588,6 +7300,14 @@

SpectroscopyElucidation

+ + + + + + + + @@ -7611,56 +7331,56 @@

SquareWaveVoltammetryAnnotations

- - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + @@ -7684,14 +7404,6 @@

StepChronopotentiometry

- - - - - - - - @@ -7700,6 +7412,14 @@

StepChronopotentiometryElucidation

+ + + + + + + + @@ -7722,6 +7442,14 @@

StrippingVoltammetry

+ + + + + + + + @@ -7751,21 +7479,13 @@

StrippingVoltammetry

- - - - - - + + - - - - @@ -7788,14 +7508,14 @@

SynchrotronAnnotations

- - - - + + + + @@ -7819,24 +7539,24 @@

TensileTestingAnnotations

- - + + - - + + - - + + - + - - + + @@ -7861,24 +7581,24 @@

ThermochemicalTestingAnnotations

- - + + - - + + - - + + - + - - + + @@ -7903,24 +7623,24 @@

ThermogravimetryAnnotations

- - + + - - + + - - + + - + - - + + @@ -7944,34 +7664,34 @@

ThreePointBendingTestingAnnotations

- - - - - - - - + + + + - - + + - - + + + + + + @@ -7994,10 +7714,6 @@

TomographyAnnotations

- - - - @@ -8006,6 +7722,10 @@

TomographyElucidation

+ + + + @@ -8029,24 +7749,24 @@

TransmissionElectronMicroscopyAnnotations

- - + + - - + + - - + + - + - - + + @@ -8070,10 +7790,6 @@

UltrasonicTestingAnnotations

- - - - @@ -8082,6 +7798,10 @@

UltrasonicTestingElucidation

+ + + + @@ -8104,10 +7824,6 @@

UserCase

- - - - @@ -8116,6 +7832,10 @@

UserCase

+ + + + @@ -8139,24 +7859,24 @@

VaporPressureDepressionOsmometryAnnotations

- - + + - - + + - - + + - + - - + + @@ -8181,24 +7901,24 @@

ViscometryAnnotations

- - + + - - + + - - + + - + - - + + @@ -8222,6 +7942,14 @@

VoltammetryAnnotations

+ + + + + + + + @@ -8235,29 +7963,21 @@

Voltammetry

- - + + - - + + - - - - - - - - @@ -8280,10 +8000,6 @@

VoltammetryAtARotatingDiskElectrodeAnnotations

- - - - @@ -8292,6 +8008,10 @@

VoltammetryAtARotatingDiskElectrodeElucidation

+ + + + @@ -8318,10 +8038,6 @@

WearTestingAnnotations

- - - - @@ -8330,6 +8046,10 @@

WearTestingElucidation

+ + + + @@ -8352,18 +8072,10 @@

XpsVariableKineticAnnotations

- - - - - - - - @@ -8372,6 +8084,14 @@

XpsVariableKineticAltlabel

+ + + + + + + + @@ -8394,34 +8114,34 @@

XrayDiffractionAnnotations

- - - - - - - - + + + + - - + + - - + + + + + + @@ -8445,24 +8165,24 @@

XrayPowderDiffractionAnnotations

- - + + - - + + - - + + - + - - + + @@ -8490,14 +8210,14 @@

XrdGrazingIncidenceAnnotations

- - - - + + + + @@ -8523,14 +8243,14 @@

hasAccessConditionsAnnotations

- - - - + + + + @@ -8557,10 +8277,6 @@

hasBeginCharacterisationTaskAnnotations

- - - - @@ -8569,6 +8285,10 @@

hasBeginCharacterisationTaskAltlabel

+ + + + @@ -8595,10 +8315,6 @@

hasCharacterisationComponentAnnotations

- - - - @@ -8607,6 +8323,10 @@

hasCharacterisationComponentAltlabel

+ + + + @@ -8633,10 +8353,6 @@

hasCharacterisationEnvironmentAnnotations

- - - - @@ -8645,6 +8361,10 @@

hasCharacterisationEnvironmentAltlabel

+ + + + @@ -8671,10 +8391,6 @@

hasCharacterisationEnvironmentPropertyAnnotations

- - - - @@ -8683,6 +8399,10 @@

hasCharacterisationEnvironmentPropertyAltlabel

+ + + + @@ -8709,10 +8429,6 @@

hasCharacterisationInputAnnotations

- - - - @@ -8721,6 +8437,10 @@

hasCharacterisationInputAltlabel

+ + + + @@ -8747,10 +8467,6 @@

hasCharacterisationMeasurementInstrumentAnnotations

- - - - @@ -8759,6 +8475,10 @@

hasCharacterisationMeasurementInstrumentAltlabel

+ + + + @@ -8785,10 +8505,6 @@

hasCharacterisationOutputAnnotations

- - - - @@ -8797,6 +8513,10 @@

hasCharacterisationOutputAltlabel

+ + + + @@ -8823,14 +8543,14 @@

hasCharacterisationProcedureValidationAnnotations

- - - - + + + + @@ -8857,10 +8577,6 @@

hasCharacterisationPropertyAnnotations

- - - - @@ -8869,6 +8585,10 @@

hasCharacterisationPropertyAltlabel

+ + + + @@ -8895,10 +8615,6 @@

hasCharacterisationSoftwareAnnotations

- - - - @@ -8907,6 +8623,10 @@

hasCharacterisationSoftwareAltlabel

+ + + + @@ -8933,10 +8653,6 @@

hasCharacterisationTask

- - - - @@ -8945,6 +8661,10 @@

hasCharacterisationTaskAltlabel

+ + + + @@ -8971,14 +8691,14 @@

hasDataAcquisitionRate

- - - - + + + + @@ -9005,14 +8725,14 @@

hasDataProcessingThroughCalibrationAnnotations

- - - - + + + + @@ -9039,14 +8759,14 @@

hasDataQualityAnnotations

- - - - + + + + @@ -9073,14 +8793,14 @@

hasDatasetAnnotations

- - - - + + + + @@ -9107,14 +8827,14 @@

hasDateOfCalibration

- - - - + + + + @@ -9141,10 +8861,6 @@

hasEndCharacterisationTaskAnnotations

- - - - @@ -9153,6 +8869,10 @@

hasEndCharacterisationTaskAltlabel

+ + + + @@ -9179,14 +8899,14 @@

hasHardwareSpecificationAnnotations

- - - - + + + + @@ -9213,14 +8933,14 @@

hasHazardAnnotations

- - - - + + + + @@ -9247,14 +8967,14 @@

hasHolderAnnotations

- - - - + + + + @@ -9281,14 +9001,14 @@

hasInstrumentForCalibrationAnnotations

- - - - + + + + @@ -9315,14 +9035,14 @@

hasInteractionVolume

- - - - + + + + @@ -9349,14 +9069,14 @@

hasInteractionWithProbe

- - - - + + + + @@ -9383,14 +9103,14 @@

hasInteractionWithSampleAnnotations

- - - - + + + + @@ -9417,14 +9137,14 @@

hasLab

- - - - + + + + @@ -9451,14 +9171,14 @@

hasLevelOfAutomation

- - - - + + + + @@ -9485,10 +9205,6 @@

hasManufacturerAnnotations

- - - - @@ -9497,6 +9213,10 @@

hasManufacturerElucidation

+ + + + @@ -9523,14 +9243,14 @@

hasMeasurementDetector

- - - - + + + + @@ -9557,14 +9277,14 @@

hasMeasurementParameter

- - - - + + + + @@ -9591,14 +9311,14 @@

hasMeasurementProbeAnnotations

- - - - + + + + @@ -9625,14 +9345,14 @@

hasMeasurementSample

- - - - + + + + @@ -9659,14 +9379,14 @@

hasMeasurementTimeAnnotations

- - - - + + + + @@ -9693,10 +9413,6 @@

hasModel

- - - - @@ -9705,6 +9421,10 @@

hasModel

+ + + + @@ -9731,14 +9451,14 @@

hasOperatorAnnotations

- - - - + + + + @@ -9765,14 +9485,14 @@

hasPeerReviewedArticle

- - - - + + + + @@ -9799,14 +9519,14 @@

hasPhysicsOfInteraction

- - - - + + + + @@ -9833,14 +9553,14 @@

hasPostProcessingModel

- - - - + + + + @@ -9867,14 +9587,14 @@

hasProcessingReproducibilityAnnotations

- - - - + + + + @@ -9901,14 +9621,14 @@

hasReferenceSampleAnnotations

- - - - + + + + @@ -9936,14 +9656,14 @@

hasSampleBeforeSamplePreparationAnnotations

- - - - + + + + @@ -9974,14 +9694,14 @@

hasSampleForInspection

- - - - + + + + @@ -10008,14 +9728,14 @@

hasSampleInspectionInstrumentAnnotations

- - - - + + + + @@ -10042,14 +9762,14 @@

hasSampleInspectionParameterAnnotations

- - - - + + + + @@ -10076,14 +9796,14 @@

hasSamplePreparationInstrumentAnnotations

- - - - + + + + @@ -10110,14 +9830,14 @@

hasSamplePreparationParameterAnnotations

- - - - + + + + @@ -10144,14 +9864,14 @@

hasSampledSampleAnnotations

- - - - + + + + @@ -10178,10 +9898,6 @@

hasUniqueIDAnnotations

- - - - @@ -10190,6 +9906,10 @@

hasUniqueIDElucidation

+ + + + @@ -10216,14 +9936,14 @@

requiresLevelOfExpertiseAnnotations

- - - - + + + + @@ -10250,21 +9970,21 @@

userCaseHasCharacterisationProcedureAnnotations

- - - - + + + + - - + + diff --git a/chameo.owl b/chameo.owl index 6c2d298..cd6c361 100644 --- a/chameo.owl +++ b/chameo.owl @@ -63,16 +63,6 @@ In EMMO FOL this is a defined property. In OWL temporal relations are primitive. - - - - - - - isSpatiallyRelatedWith - isSpatiallyRelatedWith - - @@ -97,51 +87,36 @@ b) y and x non-overlapping While the EMMO FOL introduces the quantum causality relation C(x,y) as primitive, the OWL 2 DL version substantially simplifies the theory, neglecting these lower level relations that are well above DL expressivity. - - - - - - hasHolisticRelation - The relation between a holistic whole and its related entities, being them parts or other overlapping entities. - hasHolisticRelation - The relation between a holistic whole and its related entities, being them parts or other overlapping entities. - - - - + - - overlaps - The relation between two entities that share at least one of their parts. - overlaps - The relation between two entities that share at least one of their parts. + + hasSpatialSlice + A relation that identify a proper part of the whole that extends itself in time along the overall lifetime of the whole, and whose parts never cover the full spatial extension of the 4D whole. + In EMMO FOL this is a defined property. In OWL spatial relations are primitive. + hasSpatialIntegralPart + hasSpatialSlice + A relation that identify a proper part of the whole that extends itself in time along the overall lifetime of the whole, and whose parts never cover the full spatial extension of the 4D whole. + In EMMO FOL this is a defined property. In OWL spatial relations are primitive. - - - - - - isNotCauseOf - x isNotCauseOf y iff not(x isCauseOf y) - isNotCauseOf - x isNotCauseOf y iff not(x isCauseOf y) + + + + semiotical + The generic EMMO semiotical relation. + semiotical + The generic EMMO semiotical relation. - + + - - causal - Causality is the fundamental concept describing how entities affect each other, and occurs before time and space relations. -Embracing a strong reductionistic view, causality originates at quantum entities level. - Each pair of entities is either in isCauseOf or isNotCauseOf relation. The two are mutually exclusive. - The superclass of all causal EMMO relations. - causal - Causality is the fundamental concept describing how entities affect each other, and occurs before time and space relations. -Embracing a strong reductionistic view, causality originates at quantum entities level. - The superclass of all causal EMMO relations. - Each pair of entities is either in isCauseOf or isNotCauseOf relation. The two are mutually exclusive. + + + EMMORelation + The class for all relations used by the EMMO. + EMMORelation + The class for all relations used by the EMMO. @@ -155,107 +130,79 @@ Embracing a strong reductionistic view, causality originates at quantum entities Length hasUnit only LengthUnit - - - - - hasPart - All other mereology relations can be defined in FOL using hasPart as primitive. - The primitive relation that express the concept of an entity being part of another one. - hasPart - The primitive relation that express the concept of an entity being part of another one. - All other mereology relations can be defined in FOL using hasPart as primitive. - - - + + - - - - overcrosses - The relation between an entity that overlaps another without being its part. - overcrosses - The relation between an entity that overlaps another without being its part. - - - - - - - - EMMORelation - The class for all relations used by the EMMO. - EMMORelation - The class for all relations used by the EMMO. - - - - - - hasNonMaximalPart - hasNonMaximalPart + + + notOverlaps + notOverlaps - + - - isPortionPartOf - isPortionPartOf + + mereological + The EMMO adheres to Atomistic General Extensional Mereology (AGEM). + The superclass of all mereological EMMO relations. + mereological + The superclass of all mereological EMMO relations. + The EMMO adheres to Atomistic General Extensional Mereology (AGEM). - - + - - - isConcomitantWith - The relation between two causally reachable entities through a path of contacts relations (i.e. representing physical interactions). - alongsideOf - isConcomitantWith - The relation between two causally reachable entities through a path of contacts relations (i.e. representing physical interactions). + + overlaps + The relation between two entities that share at least one of their parts. + overlaps + The relation between two entities that share at least one of their parts. - - - - - isIndirectCauseOf - A causal relation between the effected and the causing entities with intermediaries. - An indirect cause is a relation between two entities that is mediated by a intermediate entity. In other words, there are no quantum parts of the causing entity that are direct cause of quantum parts of the caused entity. - isIndirectCauseOf - An indirect cause is a relation between two entities that is mediated by a intermediate entity. In other words, there are no quantum parts of the causing entity that are direct cause of quantum parts of the caused entity. - A causal relation between the effected and the causing entities with intermediaries. + + + + + + hasIcon + A semiotic relation that connects a recognised semiotic object to an icon in a cognition process. + hasIcon + A semiotic relation that connects a recognised semiotic object to an icon in a cognition process. - - - - - hasTemporalItemSlice - A temporal part that is an item. - hasTemporalItemSlice - A temporal part that is an item. + + + + + + hasSign + A relation that connects the semiotic object to the sign in a semiotic process. + hasSign + A relation that connects the semiotic object to the sign in a semiotic process. - - - - hasTemporalSlice - A temporal part that capture the overall spatial extension of the causal object. - hasTemporalSlice - A temporal part that capture the overall spatial extension of the causal object. + + + + + + hasSampleBeforeSamplePreparation + hasSampleForPreparation + + hasSampleBeforeSamplePreparation - - - - - - - hasConnectedPortion - hasConnectedPortion + + + + + + hasTemporaryParticipant + The relation between a process P and an object whole O that overcrosses it. The intersection between P and O is a participant of P. + hasTemporaryParticipant + The relation between a process P and an object whole O that overcrosses it. The intersection between P and O is a participant of P. @@ -270,147 +217,41 @@ Embracing a strong reductionistic view, causality originates at quantum entities The partial overlapping is required since the creating process is distinct with the process in which the output is used or consumed. - - - - - - - hasHolisticOverlap - A relation between two holistic wholes that properly overlap, sharing one of their holistic parts. - This relation is about two wholes that overlap, and whose intersection is an holistic part of both. - hasHolisticOverlap - A relation between two holistic wholes that properly overlap, sharing one of their holistic parts. - A man and the process of building a house. -The man is a whole that possesses an holistic temporal part which is an interval of six monts and represents a working period in his lifetime. -The process of building a house is a whole that possesses an holistic spatial part which is a builder. -The working period of the man and the builder participating the building process are the same individual, belonging both to a man lifetime and to a building holistic views. -In this sense, the man and the building process overcrosses. and the overlapping individual is represented differently in both holistic views. - This relation is about two wholes that overlap, and whose intersection is an holistic part of both. + + + + + + hasIndex + A semiotic relation that connects a deduced semiotic object to an indexin a deduction process. + hasIndex + A semiotic relation that connects a deduced semiotic object to an indexin a deduction process. - - - - - hasConventionalProperty - An object can be represented by a quantity for the fact that it has been recognized to belong to a specific class. - -The quantity is selected without an observation aimed to measure its actual value, but by convention. - Assigns a quantity to an object by convention. - hasConventionalProperty - Assigns a quantity to an object by convention. - An Hydrogen atom has the quantity atomic number Z = 1 as its conventional property. + + + + isPartOf + isPartOf - - - - - hasObjectiveProperty - Relates an object to a quantity describing a quantifiable property of the object obtained via a well-defined procedure. - hasObjectiveProperty - - - - - - hasCharacterisationOutput - - hasCharacterizationOutput - hasCharacterisationOutput - - - - + + - - - - equalsTo - Equality is here defined following a mereological approach. - The relation between two entities that stands for the same individuals. - equalsTo - The relation between two entities that stands for the same individuals. - Equality is here defined following a mereological approach. + + + + overcrosses + The relation between an entity that overlaps another without being its part. + overcrosses + The relation between an entity that overlaps another without being its part. - + - isPartOf - isPartOf - - - - - - semiotical - The generic EMMO semiotical relation. - semiotical - The generic EMMO semiotical relation. - - - - - - - - hasParticipant - Participation is a parthood relation: you must be part of the process to contribute to it. A participant whose 4D extension is totally contained within the process. - -Participation is not under direct parthood since a process is not strictly related to reductionism, but it's a way to categorize temporal regions by the interpreters. - The relation between a process and an object participating to it, i.e. that is relevant to the process itself. - hasParticipant - The relation between a process and an object participating to it, i.e. that is relevant to the process itself. - - - - - - - - hasHolisticNonTemporalPart - hasHolisticNonTemporalPart - - - - - - - - hasSampleInspectionParameter - - hasSampleInspectionParameter - - - - - - - hasInput - The input of a process. - hasInput - The input of a process. - - - - - - - - - hasRedundantPart - The purpose of this relation is to provide a parhood relation that does not go deep enough, in terms of decomposition, to break the holistic definition of the whole. - -On the contrary, the holistic parthood, is expected to go that deep. - The superproperty of the relations between a whole and its mereological parts that are still holistic wholes of the same type. - hasRedundantPart - The superproperty of the relations between a whole and its mereological parts that are still holistic wholes of the same type. - A volume of water has redundand parts other volumes of water. All this volumes have holistic parts some water molecules. - The purpose of this relation is to provide a parhood relation that does not go deep enough, in terms of decomposition, to break the holistic definition of the whole. - -On the contrary, the holistic parthood, is expected to go that deep. + isOvercrossedBy + isOvercrossedBy @@ -434,159 +275,115 @@ On the contrary, the holistic parthood, is expected to go that deep.An holistic part of water fluid is a water molecule. - - - - - - hasScatteredPortion - hasScatteredPortion + + + + + + + hasHolisticOverlap + A relation between two holistic wholes that properly overlap, sharing one of their holistic parts. + This relation is about two wholes that overlap, and whose intersection is an holistic part of both. + hasHolisticOverlap + A relation between two holistic wholes that properly overlap, sharing one of their holistic parts. + A man and the process of building a house. +The man is a whole that possesses an holistic temporal part which is an interval of six monts and represents a working period in his lifetime. +The process of building a house is a whole that possesses an holistic spatial part which is a builder. +The working period of the man and the builder participating the building process are the same individual, belonging both to a man lifetime and to a building holistic views. +In this sense, the man and the building process overcrosses. and the overlapping individual is represented differently in both holistic views. + This relation is about two wholes that overlap, and whose intersection is an holistic part of both. - + + + + + + userCaseHasCharacterisationProcedure + Used to correlate a user case to a characterisation procedure + userCaseHasCharacterizationProcedure + userCaseHasCharacterisationProcedure + Used to correlate a user case to a characterisation procedure + + + - - hasSpatialSlice - A relation that identify a proper part of the whole that extends itself in time along the overall lifetime of the whole, and whose parts never cover the full spatial extension of the 4D whole. - In EMMO FOL this is a defined property. In OWL spatial relations are primitive. - hasSpatialIntegralPart - hasSpatialSlice - A relation that identify a proper part of the whole that extends itself in time along the overall lifetime of the whole, and whose parts never cover the full spatial extension of the 4D whole. - In EMMO FOL this is a defined property. In OWL spatial relations are primitive. + + + hasPart + All other mereology relations can be defined in FOL using hasPart as primitive. + The primitive relation that express the concept of an entity being part of another one. + hasPart + The primitive relation that express the concept of an entity being part of another one. + All other mereology relations can be defined in FOL using hasPart as primitive. - - + + - - - hasSamplePreparationParameter + + + hasReferenceSample - hasSamplePreparationParameter + hasReferenceSample - - - - - hasQuantity - Relates the result of a semiotic process to ont of its optained quantities. - hasQuantity - Relates the result of a semiotic process to ont of its optained quantities. + + + + + + hasMaximalCollection + hasMaximalCollection - + - - - hasJunctionPart - The part is connected with the rest item or members with hasNext (or its inverse) and hasContact relations only. - hasSpatioTemporalPart - hasJunctionPart - The part is connected with the rest item or members with hasNext (or its inverse) and hasContact relations only. + + + hasMaximalPart + hasMaximalPart - + - - hasHeterogeneousPart - The part is not connected with the rest item or members with hasNext (or its inverse) only or hasContact relations only. - hasHeterogeneousPart - The part is not connected with the rest item or members with hasNext (or its inverse) only or hasContact relations only. + + + + hasSubCollection + hasSubCollection - + + + + + + hasHolisticRelation + The relation between a holistic whole and its related entities, being them parts or other overlapping entities. + hasHolisticRelation + The relation between a holistic whole and its related entities, being them parts or other overlapping entities. + + + + + - - hasNonTemporalPart - The part is not connected with the rest item or members with hasNext relation (or its inverse). - hasNonTemporalPart - The part is not connected with the rest item or members with hasNext relation (or its inverse). + + properOverlaps + The relation between two entities that overlaps and neither of both is part of the other. + properOverlaps + The relation between two entities that overlaps and neither of both is part of the other. - - + + - - - hasInteractionWithProbe + + + hasSamplePreparationInstrument - hasInteractionWithProbe - - - - - - hasTemporalSection - A temporal part that is not a slice. - hasTemporalSection - A temporal part that is not a slice. - - - - - - hasTemporalPart - A relation that identify a proper item part of the whole, whose parts always cover the full spatial extension of the whole within a time interval. - A temporal part of an item cannot both cause and be caused by any other proper part of the item. - -A temporal part is not constraint to be causally self-connected, i.e. it can be either an item or a collection. We therefore introduce two subproperties in order to distinguish between both cases. - hasTemporalPart - A relation that identify a proper item part of the whole, whose parts always cover the full spatial extension of the whole within a time interval. - A temporal part of an item cannot both cause and be caused by any other proper part of the item. - -A temporal part is not constraint to be causally self-connected, i.e. it can be either an item or a collection. We therefore introduce two subproperties in order to distinguish between both cases. - In EMMO FOL this is a defined property. In OWL temporal relations are primitive. - - - - - - - - hasIndex - A semiotic relation that connects a deduced semiotic object to an indexin a deduction process. - hasIndex - A semiotic relation that connects a deduced semiotic object to an indexin a deduction process. - - - - - - - - hasSign - A relation that connects the semiotic object to the sign in a semiotic process. - hasSign - A relation that connects the semiotic object to the sign in a semiotic process. - - - - - - - - hasInteractionVolume - - hasInteractionVolume - - - - - - - - hasFractionalMember - hasFractionalMember - - - - - - - - hasSubItem - hasSubItem + hasSamplePreparationInstrument @@ -602,7 +399,7 @@ A temporal part is not constraint to be causally self-connected, i.e. it can be - + hasConvention @@ -611,59 +408,136 @@ A temporal part is not constraint to be causally self-connected, i.e. it can be A semiotic relation that connects a declared semiotic object to a conventional sign in a declaration process. - - - - isGatheredPartOf - isGatheredPartOf - - - + - - - hasBehaviour - hasBehaviour + + + hasConstituent + The relation between an object and one of its holistic part that contributes to the object under some spatial-based criteria. + hasConstituent + The relation between an object and one of its holistic part that contributes to the object under some spatial-based criteria. - + - - + - hasHolisticTemporalPart - hasHolisticTemporalPart + + hasHolisticNonTemporalPart + hasHolisticNonTemporalPart - + + + + + + isNotCauseOf + x isNotCauseOf y iff not(x isCauseOf y) + isNotCauseOf + x isNotCauseOf y iff not(x isCauseOf y) + + + + + + + + hasDeduced + A semiotic relation connecting a decucing interpreter to the "deduced" semiotic object in a deduction process. + hasDeduced + A semiotic relation connecting a decucing interpreter to the "deduced" semiotic object in a deduction process. + + + + + + + + hasReferent + A relation that connects the interpreter to the semiotic object in a semiotic process. + hasSemioticObject + hasReferent + A relation that connects the interpreter to the semiotic object in a semiotic process. + + + + - - - hasMeasurementDetector + + + hasSampleInspectionParameter - hasMeasurementDetector + hasSampleInspectionParameter - + - - hasTemporaryParticipant - The relation between a process P and an object whole O that overcrosses it. The intersection between P and O is a participant of P. - hasTemporaryParticipant - The relation between a process P and an object whole O that overcrosses it. The intersection between P and O is a participant of P. + hasInput + The input of a process. + hasInput + The input of a process. - - - - + + + + + + hasCollaborationWith + hasCollaborationWith + + + + + + + + + isSpatiallyRelatedWith + isSpatiallyRelatedWith + + + + + + + + hasReferencePart + Relates a quantity to its reference unit through spatial direct parthood. + hasReferencePart + Relates a quantity to its reference unit through spatial direct parthood. + + + + + + + + hasUnitNonPrefixPart + Relates a prefixed unit to its non-prefixed part. + hasUnitNonPrefixPart + Relates a prefixed unit to its non-prefixed part. + For example the unit CentiNewtonMetre has prefix "Centi" and non-prefix part "NewtonMetre". + + + + + + isGatheredPartOf + isGatheredPartOf + + + + + - hasDataAcquisitionRate - - hasDataAcquisitionRate + hasObjectiveProperty + Relates an object to a quantity describing a quantifiable property of the object obtained via a well-defined procedure. + hasObjectiveProperty @@ -677,45 +551,190 @@ A temporal part is not constraint to be causally self-connected, i.e. it can be A semiotic relation that connects a semiotic object to a property in a declaration process. - - - - - - hasDeducer - A semiotic relation connecting an index sign to the interpreter (deducer) in a deduction process. - hasDeducer - A semiotic relation connecting an index sign to the interpreter (deducer) in a deduction process. - - - - - - - - hasInterpreter - A relation connecting a sign to the interpreter in a semiotic process. - hasInterpreter - A relation connecting a sign to the interpreter in a semiotic process. + + + + + + hasMeasurementSample + + hasMeasurementSample - - - - - - hasConstitutiveProcess - hasConstitutiveProcess + + + + + + hasMetrologicalUncertainty + Assigns a quantifiable uncertainty to an objective property through a well-defined procecure. + Since measurement uncertainty is a subclass of objective property, this relation can also describe the uncertainty of an measurement uncertainty. + hasMetrologicalUncertainty + Assigns a quantifiable uncertainty to an objective property through a well-defined procecure. + Since measurement uncertainty is a subclass of objective property, this relation can also describe the uncertainty of an measurement uncertainty. - - - - - hasAgent - The relation within a process and an agengt participant. - hasAgent - The relation within a process and an agengt participant. + + + + + + hasCogniser + A semiotic relation connecting an icon to a interpreter (cogniser) in a cognision process. + hasCogniser + A semiotic relation connecting an icon to a interpreter (cogniser) in a cognision process. + + + + + + + + hasInterpreter + A relation connecting a sign to the interpreter in a semiotic process. + hasInterpreter + A relation connecting a sign to the interpreter in a semiotic process. + + + + + + + + hasUnitSymbol + Relates a prefixed unit to its unit symbol part. + hasUnitSymbol + Relates a prefixed unit to its unit symbol part. + + + + + + + isIndirectCauseOf + A causal relation between the effected and the causing entities with intermediaries. + An indirect cause is a relation between two entities that is mediated by a intermediate entity. In other words, there are no quantum parts of the causing entity that are direct cause of quantum parts of the caused entity. + isIndirectCauseOf + An indirect cause is a relation between two entities that is mediated by a intermediate entity. In other words, there are no quantum parts of the causing entity that are direct cause of quantum parts of the caused entity. + A causal relation between the effected and the causing entities with intermediaries. + + + + + + + + hasLevelOfAutomation + + hasLevelOfAutomation + + + + + + + hasSampleInspectionInstrument + + hasSampleInspectionInstrument + + + + + + + + hasCharacterisationProcedureValidation + + hasCharacterisationProcedureValidation + + + + + + + + hasVariable + hasVariable + + + + + + + + + isConcomitantWith + The relation between two causally reachable entities through a path of contacts relations (i.e. representing physical interactions). + alongsideOf + isConcomitantWith + The relation between two causally reachable entities through a path of contacts relations (i.e. representing physical interactions). + + + + + + + hasMeasurementDetector + + hasMeasurementDetector + + + + + + + hasTemporalCollectionSlice + A temporal part that is a collection. + hasTemporalCollectionSlice + A temporal part that is a collection. + + + + + + hasTemporalSlice + A temporal part that capture the overall spatial extension of the causal object. + hasTemporalSlice + A temporal part that capture the overall spatial extension of the causal object. + + + + + + + + hasScatteredPortion + hasScatteredPortion + + + + + + + hasTemporalItemSlice + A temporal part that is an item. + hasTemporalItemSlice + A temporal part that is an item. + + + + + + + + + hasConnectedPortion + hasConnectedPortion + + + + + + + + hasPeerReviewedArticle + + hasPeerReviewedArticle @@ -758,192 +777,93 @@ It does not exclude the possibility of indirect causal routes between proper par Direct cause provides the edges for the transitive restriction of the direct acyclic causal graph whose nodes are the quantum entities. - - - - isOvercrossedBy - isOvercrossedBy - - - - - - - - hasConstituent - The relation between an object and one of its holistic part that contributes to the object under some spatial-based criteria. - hasConstituent - The relation between an object and one of its holistic part that contributes to the object under some spatial-based criteria. - - - - + - + - hasMetrologicalUncertainty - Assigns a quantifiable uncertainty to an objective property through a well-defined procecure. - Since measurement uncertainty is a subclass of objective property, this relation can also describe the uncertainty of an measurement uncertainty. - hasMetrologicalUncertainty - Assigns a quantifiable uncertainty to an objective property through a well-defined procecure. - Since measurement uncertainty is a subclass of objective property, this relation can also describe the uncertainty of an measurement uncertainty. + hasMeasuredProperty + Assigns a quantity to an object via a well-defined measurement procedure. + hasMeasuredProperty + Assigns a quantity to an object via a well-defined measurement procedure. - - - + - - properOverlaps - The relation between two entities that overlaps and neither of both is part of the other. - properOverlaps - The relation between two entities that overlaps and neither of both is part of the other. - + + hasTemporalPart + A relation that identify a proper item part of the whole, whose parts always cover the full spatial extension of the whole within a time interval. + A temporal part of an item cannot both cause and be caused by any other proper part of the item. - - - - - - hasStage - hasStage - +A temporal part is not constraint to be causally self-connected, i.e. it can be either an item or a collection. We therefore introduce two subproperties in order to distinguish between both cases. + hasTemporalPart + A relation that identify a proper item part of the whole, whose parts always cover the full spatial extension of the whole within a time interval. + A temporal part of an item cannot both cause and be caused by any other proper part of the item. - - - - - hasResourceIdentifier - Relates a resource to its identifier. - hasResourceIdentifier - Relates a resource to its identifier. +A temporal part is not constraint to be causally self-connected, i.e. it can be either an item or a collection. We therefore introduce two subproperties in order to distinguish between both cases. + In EMMO FOL this is a defined property. In OWL temporal relations are primitive. - - - - - hasDataset - - hasDataset - - - - - - mereological - The EMMO adheres to Atomistic General Extensional Mereology (AGEM). - The superclass of all mereological EMMO relations. - mereological - The superclass of all mereological EMMO relations. - The EMMO adheres to Atomistic General Extensional Mereology (AGEM). - - - - - - - - hasBeginCharacterisationTask - - hasBeginCharacterizationTask - hasBeginCharacterisationTask - - - - - - hasBeginTask - hasBeginTask - - - - - - - hasCharacterisationSoftware - - hasCharacterizationSoftware - hasCharacterisationSoftware - - - - + + - - - hasIcon - A semiotic relation that connects a recognised semiotic object to an icon in a cognition process. - hasIcon - A semiotic relation that connects a recognised semiotic object to an icon in a cognition process. + + + hasCognised + A semiotic relation connecting a recognising interpreter to the "cognised" semiotic object in a cognition process. + hasCognised + A semiotic relation connecting a recognising interpreter to the "cognised" semiotic object in a cognition process. - - - - - - hasCharacterisationMeasurementInstrument - - hasCharacterizationMeasurementInstrument - hasCharacterisationMeasurementInstrument + + + + + hasModelledProperty + Assigns a quantity to an object via a well-defined modelling procedure. + hasModelledProperty + Assigns a quantity to an object via a well-defined modelling procedure. - - + + - - - hasSampledSample + + + hasPhysicsOfInteraction - hasSampledSample + hasPhysicsOfInteraction - - - - - - - - hasInterval - The relation between a process whole and a temporal part of the same type. - hasInterval - The relation between a process whole and a temporal part of the same type. + + + + hasModel + hasModel - - - - - - hasDeduced - A semiotic relation connecting a decucing interpreter to the "deduced" semiotic object in a deduction process. - hasDeduced - A semiotic relation connecting a decucing interpreter to the "deduced" semiotic object in a deduction process. + + + + + + hasFractionalMember + hasFractionalMember - - - - - - hasReferent - A relation that connects the interpreter to the semiotic object in a semiotic process. - hasSemioticObject - hasReferent - A relation that connects the interpreter to the semiotic object in a semiotic process. + + + + + + hasSubItem + hasSubItem - - - - - - hasSubProcess - The relation between a process and one of its process parts. - hasSubProcess - The relation between a process and one of its process parts. + + + + hasNonMaximalPart + hasNonMaximalPart @@ -955,160 +875,233 @@ It does not exclude the possibility of indirect causal routes between proper par hasLab - - - + + - - - hasPortion - The relation between a object whole and its spatial part of the same type. - hasPortion - The relation between a object whole and its spatial part of the same type. - A volume of 1 cc of milk within a 1 litre can be considered still milk as a whole. If you scale down to a cluster of molecules, than the milk cannot be considered a fluid no more (and then no more a milk). + + + hasComponent + hasComponent - - + + - - hasSampleInspectionInstrument + + + hasCharacterisationProperty - hasSampleInspectionInstrument + hasCharacterizationProperty + hasCharacterisationProperty - - + - - - hasMeasurementParameter + + + hasCharacterisationSoftware - hasMeasurementParameter + hasCharacterizationSoftware + hasCharacterisationSoftware - + + + + + + + hasRedundantPart + The purpose of this relation is to provide a parhood relation that does not go deep enough, in terms of decomposition, to break the holistic definition of the whole. + +On the contrary, the holistic parthood, is expected to go that deep. + The superproperty of the relations between a whole and its mereological parts that are still holistic wholes of the same type. + hasRedundantPart + The superproperty of the relations between a whole and its mereological parts that are still holistic wholes of the same type. + A volume of water has redundand parts other volumes of water. All this volumes have holistic parts some water molecules. + The purpose of this relation is to provide a parhood relation that does not go deep enough, in terms of decomposition, to break the holistic definition of the whole. + +On the contrary, the holistic parthood, is expected to go that deep. + + + - - - - hasSubCollection - hasSubCollection + + hasHeterogeneousPart + The part is not connected with the rest item or members with hasNext (or its inverse) only or hasContact relations only. + hasHeterogeneousPart + The part is not connected with the rest item or members with hasNext (or its inverse) only or hasContact relations only. - - - - + + - hasDatum - Relates a dataset to its datum. - hasDatum - Relates a dataset to its datum. + hasNonTemporalPart + The part is not connected with the rest item or members with hasNext relation (or its inverse). + hasNonTemporalPart + The part is not connected with the rest item or members with hasNext relation (or its inverse). - - - - - - userCaseHasCharacterisationProcedure - Used to correlate a user case to a characterisation procedure - userCaseHasCharacterizationProcedure - userCaseHasCharacterisationProcedure - Used to correlate a user case to a characterisation procedure + + + + hasTemporalSection + A temporal part that is not a slice. + hasTemporalSection + A temporal part that is not a slice. - - - - hasSpatialSection - A proper part of the whole that is not Spatial or Temporal. - This relation identifies parts of a 4D object that do not fully cover the lifetime extent of the whole (spatial) nor the full spatial extent (temporal). - hasSpatialPartialPart - hasSpatialSection - A proper part of the whole that is not Spatial or Temporal. - This relation identifies parts of a 4D object that do not fully cover the lifetime extent of the whole (spatial) nor the full spatial extent (temporal). - This relation is a filler, to categorise the parts of an entity that are not covered by the other parthood relations. -A proper part is then the disjoint union of: spatial part, temporal part and spatio temporal part relations. + + + + + hasResourceIdentifier + Relates a resource to its identifier. + hasResourceIdentifier + Relates a resource to its identifier. - - - - - - hasSampleForInspection - - hasSampleForInspection + + + + + + hasStatus + hasStatus - - - - - - hasHolder - - hasHolder + + + + + + hasHolisticTemporalPart + hasHolisticTemporalPart - - + - - - hasInstrumentForCalibration + + hasCharacterisationComponent - hasInstrumentForCalibration + hasCharacterizationComponent + hasCharacterisationComponent - - + + - - - hasPostProcessingModel + + + hasInteractionVolume - hasPostProcessingModel + hasInteractionVolume - + + + + + + hasParticipant + Participation is a parthood relation: you must be part of the process to contribute to it. A participant whose 4D extension is totally contained within the process. + +Participation is not under direct parthood since a process is not strictly related to reductionism, but it's a way to categorize temporal regions by the interpreters. + The relation between a process and an object participating to it, i.e. that is relevant to the process itself. + hasParticipant + The relation between a process and an object participating to it, i.e. that is relevant to the process itself. + + + + - - - hasSubObject - hasSubObject + + + hasPortion + The relation between a object whole and its spatial part of the same type. + hasPortion + The relation between a object whole and its spatial part of the same type. + A volume of 1 cc of milk within a 1 litre can be considered still milk as a whole. If you scale down to a cluster of molecules, than the milk cannot be considered a fluid no more (and then no more a milk). - - + + - + - hasDataQuality + hasDataAcquisitionRate - hasDataQuality + hasDataAcquisitionRate - + + - - - hasOperator + + + hasHardwareSpecification - hasOperator + hasHardwareSpecification - + + + + + + hasMeasurementTime + + hasMeasurementTime + + + - - hasOutcome - The relation between a process and the entity that represents how things have turned out. - hasOutcome - The relation between a process and the entity that represents how things have turned out. + + + hasSubProcess + The relation between a process and one of its process parts. + hasSubProcess + The relation between a process and one of its process parts. + + + + + + isPortionPartOf + isPortionPartOf + + + + + + hasBeginTask + hasBeginTask + + + + + + + + + equalsTo + Equality is here defined following a mereological approach. + The relation between two entities that stands for the same individuals. + equalsTo + The relation between two entities that stands for the same individuals. + Equality is here defined following a mereological approach. + + + + + + + + hasMeasurementParameter + + hasMeasurementParameter @@ -1120,63 +1113,135 @@ A proper part is then the disjoint union of: spatial part, temporal part and spa hasHazard - - - - - - hasComponent - hasComponent - - - - + + - - - hasPhysicsOfInteraction + + + hasDataProcessingThroughCalibration - hasPhysicsOfInteraction + hasDataProcessingThroughCalibration - - - - hasModel - hasModel + + + + + hasInterpretant + A relation that connects a semiotic object to the interpretant in a semiotic process. + hasInterpretant + A relation that connects a semiotic object to the interpretant in a semiotic process. - - - - - - hasCognised - A semiotic relation connecting a recognising interpreter to the "cognised" semiotic object in a cognition process. - hasCognised - A semiotic relation connecting a recognising interpreter to the "cognised" semiotic object in a cognition process. + + + + + hasOutcome + The relation between a process and the entity that represents how things have turned out. + hasOutcome + The relation between a process and the entity that represents how things have turned out. - - + + - - - hasCharacterisationProperty + + + hasPostProcessingModel - hasCharacterizationProperty - hasCharacterisationProperty + hasPostProcessingModel - - - - - hasMeasuredProperty - Assigns a quantity to an object via a well-defined measurement procedure. - hasMeasuredProperty - Assigns a quantity to an object via a well-defined measurement procedure. - + + + + + + hasInteractionWithSample + + hasInteractionWithSample + + + + + + + + hasMetricPrefix + Relates a prefixed unit to its metric prefix part. + hasMetricPrefix + + + + + + + hasQuantity + Relates the result of a semiotic process to ont of its optained quantities. + hasQuantity + Relates the result of a semiotic process to ont of its optained quantities. + + + + + + causal + Causality is the fundamental concept describing how entities affect each other, and occurs before time and space relations. +Embracing a strong reductionistic view, causality originates at quantum entities level. + Each pair of entities is either in isCauseOf or isNotCauseOf relation. The two are mutually exclusive. + The superclass of all causal EMMO relations. + causal + Causality is the fundamental concept describing how entities affect each other, and occurs before time and space relations. +Embracing a strong reductionistic view, causality originates at quantum entities level. + The superclass of all causal EMMO relations. + Each pair of entities is either in isCauseOf or isNotCauseOf relation. The two are mutually exclusive. + + + + + + + + hasCharacterisationEnvironmentProperty + + hasCharacterizationEnvironmentProperty + hasCharacterisationEnvironmentProperty + + + + + + + + hasDeducer + A semiotic relation connecting an index sign to the interpreter (deducer) in a deduction process. + hasDeducer + A semiotic relation connecting an index sign to the interpreter (deducer) in a deduction process. + + + + + + + hasConventionalProperty + An object can be represented by a quantity for the fact that it has been recognized to belong to a specific class. + +The quantity is selected without an observation aimed to measure its actual value, but by convention. + Assigns a quantity to an object by convention. + hasConventionalProperty + Assigns a quantity to an object by convention. + An Hydrogen atom has the quantity atomic number Z = 1 as its conventional property. + + + + + + + + hasCharacterised + hasCharacterised + @@ -1189,6 +1254,60 @@ A proper part is then the disjoint union of: spatial part, temporal part and spa A semiotic relation connecting a declaring interpreter to the "declared" semiotic object in a declaration process. + + + + + + hasCharacterisationTask + + hasCharacterizationTask + hasCharacterisationTask + + + + + + + + hasProcessingReproducibility + + hasProcessingReproducibility + + + + + + hasSpatialSection + A proper part of the whole that is not Spatial or Temporal. + This relation identifies parts of a 4D object that do not fully cover the lifetime extent of the whole (spatial) nor the full spatial extent (temporal). + hasSpatialPartialPart + hasSpatialSection + A proper part of the whole that is not Spatial or Temporal. + This relation identifies parts of a 4D object that do not fully cover the lifetime extent of the whole (spatial) nor the full spatial extent (temporal). + This relation is a filler, to categorise the parts of an entity that are not covered by the other parthood relations. +A proper part is then the disjoint union of: spatial part, temporal part and spatio temporal part relations. + + + + + + + hasOperator + + hasOperator + + + + + + + hasAgent + The relation within a process and an agengt participant. + hasAgent + The relation within a process and an agengt participant. + + @@ -1197,16 +1316,13 @@ A proper part is then the disjoint union of: spatial part, temporal part and spa hasProductOutput - - - - - - hasUnitNonPrefixPart - Relates a prefixed unit to its non-prefixed part. - hasUnitNonPrefixPart - Relates a prefixed unit to its non-prefixed part. - For example the unit CentiNewtonMetre has prefix "Centi" and non-prefix part "NewtonMetre". + + + + + hasMeasurementProbe + + hasMeasurementProbe @@ -1220,35 +1336,6 @@ A proper part is then the disjoint union of: spatial part, temporal part and spa hasCharacterisationEnvironment - - - - - hasTemporalCollectionSlice - A temporal part that is a collection. - hasTemporalCollectionSlice - A temporal part that is a collection. - - - - - - - - hasProcessingReproducibility - - hasProcessingReproducibility - - - - - - - - hasCharacteriser - hasCharacteriser - - @@ -1260,56 +1347,40 @@ A proper part is then the disjoint union of: spatial part, temporal part and spa A semiotic relation connecting a conventional sign to the interpreter (declarer) in a declaration process. - - - - - - hasReferencePart - Relates a quantity to its reference unit through spatial direct parthood. - hasReferencePart - Relates a quantity to its reference unit through spatial direct parthood. - - - - + + - - - hasCharacterisationTask + + + hasInteractionWithProbe - hasCharacterizationTask - hasCharacterisationTask + hasInteractionWithProbe - - + - - - hasSampleBeforeSamplePreparation - hasSampleForPreparation + + + hasDataset - hasSampleBeforeSamplePreparation + hasDataset - - - - - hasMeasurementProbe - - hasMeasurementProbe + + + + + hasServiceOutput + hasServiceOutput - - - - - hasInterpretant - A relation that connects a semiotic object to the interpretant in a semiotic process. - hasInterpretant - A relation that connects a semiotic object to the interpretant in a semiotic process. + + + + + + hasConstitutiveProcess + hasConstitutiveProcess @@ -1319,158 +1390,94 @@ A proper part is then the disjoint union of: spatial part, temporal part and spa hasEndTask - - - - - hasModelledProperty - Assigns a quantity to an object via a well-defined modelling procedure. - hasModelledProperty - Assigns a quantity to an object via a well-defined modelling procedure. - - - - - - - - hasInteractionWithSample - - hasInteractionWithSample + + + + + + hasManufacturedOutput + hasManufacturedOutput - + - + - hasMaximalCollection - hasMaximalCollection - - - - - - - hasMaximalPart - hasMaximalPart - - - - - - - - hasCharacterisationEnvironmentProperty - - hasCharacterizationEnvironmentProperty - hasCharacterisationEnvironmentProperty + hasFractionalCollection + hasFractionalCollection - - + + - - - hasAccessConditions + + + hasCharacterisationMeasurementInstrument - hasAccessConditions - - - - - - - hasServiceOutput - hasServiceOutput - - - - - - - - hasVariable - hasVariable + hasCharacterizationMeasurementInstrument + hasCharacterisationMeasurementInstrument - - - - - - - notOverlaps - notOverlaps + + + + + + hasSubObject + hasSubObject - - - - - - hasCogniser - A semiotic relation connecting an icon to a interpreter (cogniser) in a cognision process. - hasCogniser - A semiotic relation connecting an icon to a interpreter (cogniser) in a cognision process. + + + + + + + + hasInterval + The relation between a process whole and a temporal part of the same type. + hasInterval + The relation between a process whole and a temporal part of the same type. - - + + - - - hasHardwareSpecification + + + hasSamplePreparationParameter - hasHardwareSpecification + hasSamplePreparationParameter - - + - + - hasLevelOfAutomation + requiresLevelOfExpertise - hasLevelOfAutomation + requiresLevelOfExpertise - - + + - - hasMeasurementSample + + hasSampledSample - hasMeasurementSample - - - - - - - - hasStatus - hasStatus + hasSampledSample - - + + - + - hasReferenceSample + hasSampleForInspection - hasReferenceSample - - - - - - - - hasCharacterised - hasCharacterised + hasSampleForInspection @@ -1484,129 +1491,122 @@ A proper part is then the disjoint union of: spatial part, temporal part and spa hasEndCharacterisationTask - - - - - - hasManufacturedOutput - hasManufacturedOutput - - - - - - - - hasCollaborationWith - hasCollaborationWith - - - - - - - - hasUnitSymbol - Relates a prefixed unit to its unit symbol part. - hasUnitSymbol - Relates a prefixed unit to its unit symbol part. - - - + + - - hasCharacterisationComponent + + + hasDataQuality - hasCharacterizationComponent - hasCharacterisationComponent + hasDataQuality - - - - - - hasPeerReviewedArticle - - hasPeerReviewedArticle + + + + + + hasBehaviour + hasBehaviour - - + + - - - hasCharacterisationProcedureValidation + + + hasInstrumentForCalibration - hasCharacterisationProcedureValidation + hasInstrumentForCalibration - - - - hasCharacterisationInput - - hasCharacterizationInput - hasCharacterisationInput + + + + + hasJunctionPart + The part is connected with the rest item or members with hasNext (or its inverse) and hasContact relations only. + hasSpatioTemporalPart + hasJunctionPart + The part is connected with the rest item or members with hasNext (or its inverse) and hasContact relations only. - - - - - - hasMetricPrefix - Relates a prefixed unit to its metric prefix part. - hasMetricPrefix + + + + + + hasDatum + Relates a dataset to its datum. + hasDatum + Relates a dataset to its datum. - - + + + + + + hasStage + hasStage + + + + + + + + hasCharacteriser + hasCharacteriser + + + + - - - hasMeasurementTime + + + hasBeginCharacterisationTask - hasMeasurementTime + hasBeginCharacterizationTask + hasBeginCharacterisationTask - - + + - + - hasDataProcessingThroughCalibration + hasAccessConditions - hasDataProcessingThroughCalibration - - - - - - - - hasFractionalCollection - hasFractionalCollection + hasAccessConditions - + - + - hasSamplePreparationInstrument + hasHolder - hasSamplePreparationInstrument + hasHolder - + - - - requiresLevelOfExpertise + + hasCharacterisationInput - requiresLevelOfExpertise + hasCharacterizationInput + hasCharacterisationInput + + + + + + hasCharacterisationOutput + + hasCharacterizationOutput + hasCharacterisationOutput @@ -1618,35 +1618,6 @@ A proper part is then the disjoint union of: spatial part, temporal part and spa Relates a SI dimensional unit to a dimension string. - - - - - - hasNumericalValue - The owl:dataProperty that provides a serialisation of an EMMO numerical data entity. - hasNumericalValue - The owl:dataProperty that provides a serialisation of an EMMO numerical data entity. - - - - - - - - hasModel - A string representing the model of a CharacterisationHardware - hasModel - A string representing the model of a CharacterisationHardware - - - - - - hasURNValue - hasURNValue - - @@ -1655,18 +1626,6 @@ A proper part is then the disjoint union of: spatial part, temporal part and spa hasURIValue - - - - - - - hasSymbolValue - The owl:dataProperty that provides a serialisation of an EMMO symbol data entity. - hasSymbolValue - The owl:dataProperty that provides a serialisation of an EMMO symbol data entity. - - @@ -1679,6 +1638,13 @@ A proper part is then the disjoint union of: spatial part, temporal part and spa This is the superproperty of all data properties used to serialise a fundamental data type in the EMMO Data perspective. An entity can have only one data value expressing its serialisation (e.g. a Real entity cannot have two different real values). + + + + hasURNValue + hasURNValue + + @@ -1691,6 +1657,29 @@ A proper part is then the disjoint union of: spatial part, temporal part and spa The owl:dataProperty that provides a serialisation of an EMMO string data entity. + + + + + + hasNumericalValue + The owl:dataProperty that provides a serialisation of an EMMO numerical data entity. + hasNumericalValue + The owl:dataProperty that provides a serialisation of an EMMO numerical data entity. + + + + + + + + + hasSymbolValue + The owl:dataProperty that provides a serialisation of an EMMO symbol data entity. + hasSymbolValue + The owl:dataProperty that provides a serialisation of an EMMO symbol data entity. + + @@ -1702,13 +1691,6 @@ A proper part is then the disjoint union of: spatial part, temporal part and spa A string representing the UniqueID of a CharacterisationHardware - - - - hasURLValue - hasURLValue - - @@ -1720,6 +1702,13 @@ A proper part is then the disjoint union of: spatial part, temporal part and spa A string representing the Manufacturer of a CharacterisationHardware + + + + hasURLValue + hasURLValue + + @@ -1730,6 +1719,17 @@ A proper part is then the disjoint union of: spatial part, temporal part and spa hasDateOfCalibration + + + + + + hasModel + A string representing the model of a CharacterisationHardware + hasModel + A string representing the model of a CharacterisationHardware + + @@ -1743,28 +1743,23 @@ A proper part is then the disjoint union of: spatial part, temporal part and spa - - - - OWLDLRestrictedAxiom - Axiom not included in the theory because of OWL 2 DL global restrictions for decidability. - OWLDLRestrictedAxiom - Axiom not included in the theory because of OWL 2 DL global restrictions for decidability. - - - - - - comment - A comment can be addressed to facilitate interpretation, to suggest possible usage, to clarify the concepts behind each entity with respect to other ontological apporaches. - A text that add some information about the entity. - comment - A text that add some information about the entity. - A comment can be addressed to facilitate interpretation, to suggest possible usage, to clarify the concepts behind each entity with respect to other ontological apporaches. + + + + + VIMTerm + The term in the International vocabulary of metrology (VIM) (JCGM 200:2008) that corresponds to the annotated term in EMMO. + https://www.bipm.org/documents/20126/2071204/JCGM_200_2012.pdf + VIMTerm + quantity value (term in VIM that corresponds to Quantity in EMMO) + The term in the International vocabulary of metrology (VIM) (JCGM 200:2008) that corresponds to the annotated term in EMMO. - - + + + + metrologicalReference + metrologicalReference @@ -1772,26 +1767,16 @@ A proper part is then the disjoint union of: spatial part, temporal part and spa - - - - elucidation - An elucidation should address the real world entities using the concepts introduced by the conceptualisation annotation. - Short enlightening explanation aimed to facilitate the user in drawing the connection (interpretation) between a OWL entity and the real world object(s) for which it stands. - elucidation - Short enlightening explanation aimed to facilitate the user in drawing the connection (interpretation) between a OWL entity and the real world object(s) for which it stands. - An elucidation should address the real world entities using the concepts introduced by the conceptualisation annotation. - - - + - contact - A person or organisation acting as a contact point for enquiries about the ontology resource - The annotation should include an email address. - contact - A person or organisation acting as a contact point for enquiries about the ontology resource - The annotation should include an email address. + etymology + Definitions are usually taken from Wiktionary. + The etymology annotation explains the origin of a word and the historical development of its meaning. + etymology + The etymology annotation explains the origin of a word and the historical development of its meaning. + Definitions are usually taken from Wiktionary. + The etymology annotation is usually applied to rdfs:label entities, to better understand the connection between a label and the concept it concisely represents. @@ -1814,58 +1799,60 @@ A proper part is then the disjoint union of: spatial part, temporal part and spa - - - - wikidataReference - URL corresponding to entry in Wikidata. - https://www.wikidata.org/ - wikidataReference - URL corresponding to entry in Wikidata. + + + + elucidation + An elucidation should address the real world entities using the concepts introduced by the conceptualisation annotation. + Short enlightening explanation aimed to facilitate the user in drawing the connection (interpretation) between a OWL entity and the real world object(s) for which it stands. + elucidation + Short enlightening explanation aimed to facilitate the user in drawing the connection (interpretation) between a OWL entity and the real world object(s) for which it stands. + An elucidation should address the real world entities using the concepts introduced by the conceptualisation annotation. - - - - omReference - IRI to corresponding concept in the Ontology of units of Measure. - https://enterpriseintegrationlab.github.io/icity/OM/doc/index-en.html - https://github.com/HajoRijgersberg/OM - omReference - IRI to corresponding concept in the Ontology of units of Measure. + + + + comment + A comment can be addressed to facilitate interpretation, to suggest possible usage, to clarify the concepts behind each entity with respect to other ontological apporaches. + A text that add some information about the entity. + comment + A text that add some information about the entity. + A comment can be addressed to facilitate interpretation, to suggest possible usage, to clarify the concepts behind each entity with respect to other ontological apporaches. - - - - metrologicalReference - metrologicalReference + + - + - - etymology - Definitions are usually taken from Wiktionary. - The etymology annotation explains the origin of a word and the historical development of its meaning. - etymology - The etymology annotation explains the origin of a word and the historical development of its meaning. - Definitions are usually taken from Wiktionary. - The etymology annotation is usually applied to rdfs:label entities, to better understand the connection between a label and the concept it concisely represents. + + + wikipediaReference + URL to corresponding Wikipedia entry. + https://www.wikipedia.org/ + wikipediaReference + URL to corresponding Wikipedia entry. - + + + + + + + + + - ucumCode - The Unified Code for Units of Measure (UCUM) is a code system intended to include all units of measures being contemporarily used in international science, engineering, and business. The purpose is to facilitate unambiguous electronic communication of quantities together with their units. - Unified Code for Units of Measure (UCUM). - https://ucum.org/ - ucumCode - Unified Code for Units of Measure (UCUM). - The Unified Code for Units of Measure (UCUM) is a code system intended to include all units of measures being contemporarily used in international science, engineering, and business. The purpose is to facilitate unambiguous electronic communication of quantities together with their units. + uneceCommonCode + The UN/CEFACT Recommendation 20 provides three character alphabetic and alphanumeric codes for representing units of measurement for length, area, volume/capacity, mass (weight), time, and other quantities used in international trade. The codes are intended for use in manual and/or automated systems for the exchange of information between participants in international trade. + uneceCommonCode + The UN/CEFACT Recommendation 20 provides three character alphabetic and alphanumeric codes for representing units of measurement for length, area, volume/capacity, mass (weight), time, and other quantities used in international trade. The codes are intended for use in manual and/or automated systems for the exchange of information between participants in international trade. @@ -1879,24 +1866,30 @@ A proper part is then the disjoint union of: spatial part, temporal part and spa A definition univocally determines a OWL entity using necessary and sufficient conditions referring to other OWL entities. - - - - ISO80000Reference - Corresponding item number in ISO 80 000. - https://www.iso.org/obp/ui/#iso:std:iso:80000:-1:ed-1:v1:en - ISO80000Reference - Corresponding item number in ISO 80 000. - 3-1.1 (ISO80000 reference to length) - - - + - example - Illustrative example of how the entity is used. - example - Illustrative example of how the entity is used. + conceptualisation + A conceptualisation is the preliminary step behind each theory, preceding each logical formalisation. The readers approaching an ontology entity should first read the conceptualisation annotation to clearly understand "what we are talking about" and the accompanying terminology, and then read the elucidation. + The conceptualisation annotation is a comment that helps the reader to understand how the world has been conceptualised by the ontology authors. + conceptualisation + The conceptualisation annotation is a comment that helps the reader to understand how the world has been conceptualised by the ontology authors. + A conceptualisation is the preliminary step behind each theory, preceding each logical formalisation. The readers approaching an ontology entity should first read the conceptualisation annotation to clearly understand "what we are talking about" and the accompanying terminology, and then read the elucidation. + An elucidation can provide references to external knowledge sources (i.e. ISO, Goldbook, RoMM). + + + + + + + + ucumCode + The Unified Code for Units of Measure (UCUM) is a code system intended to include all units of measures being contemporarily used in international science, engineering, and business. The purpose is to facilitate unambiguous electronic communication of quantities together with their units. + Unified Code for Units of Measure (UCUM). + https://ucum.org/ + ucumCode + Unified Code for Units of Measure (UCUM). + The Unified Code for Units of Measure (UCUM) is a code system intended to include all units of measures being contemporarily used in international science, engineering, and business. The purpose is to facilitate unambiguous electronic communication of quantities together with their units. @@ -1910,23 +1903,44 @@ A proper part is then the disjoint union of: spatial part, temporal part and spa URL to corresponding dpbedia entry. - - + + + + omReference + IRI to corresponding concept in the Ontology of units of Measure. + https://enterpriseintegrationlab.github.io/icity/OM/doc/index-en.html + https://github.com/HajoRijgersberg/OM + omReference + IRI to corresponding concept in the Ontology of units of Measure. - - + + + + example + Illustrative example of how the entity is used. + example + Illustrative example of how the entity is used. - - + + - wikipediaReference - URL to corresponding Wikipedia entry. - https://www.wikipedia.org/ - wikipediaReference - URL to corresponding Wikipedia entry. + iupacReference + DOI to corresponding concept in IUPAC + https://goldbook.iupac.org/ + iupacReference + + + + + + qudtReference + URL to corresponing entity in QUDT. + http://www.qudt.org/2.1/catalog/qudt-catalog.html + qudtReference + URL to corresponing entity in QUDT. @@ -1934,63 +1948,44 @@ A proper part is then the disjoint union of: spatial part, temporal part and spa - - - - - VIMTerm - The term in the International vocabulary of metrology (VIM) (JCGM 200:2008) that corresponds to the annotated term in EMMO. - https://www.bipm.org/documents/20126/2071204/JCGM_200_2012.pdf - VIMTerm - quantity value (term in VIM that corresponds to Quantity in EMMO) - The term in the International vocabulary of metrology (VIM) (JCGM 200:2008) that corresponds to the annotated term in EMMO. + + - + - - - figure - A link to a graphical representation aimed to facilitate understanding of the concept, or of an annotation. - figure - A link to a graphical representation aimed to facilitate understanding of the concept, or of an annotation. - - - - conceptualisation - A conceptualisation is the preliminary step behind each theory, preceding each logical formalisation. The readers approaching an ontology entity should first read the conceptualisation annotation to clearly understand "what we are talking about" and the accompanying terminology, and then read the elucidation. - The conceptualisation annotation is a comment that helps the reader to understand how the world has been conceptualised by the ontology authors. - conceptualisation - The conceptualisation annotation is a comment that helps the reader to understand how the world has been conceptualised by the ontology authors. - A conceptualisation is the preliminary step behind each theory, preceding each logical formalisation. The readers approaching an ontology entity should first read the conceptualisation annotation to clearly understand "what we are talking about" and the accompanying terminology, and then read the elucidation. - An elucidation can provide references to external knowledge sources (i.e. ISO, Goldbook, RoMM). + + + + ISO80000Reference + Corresponding item number in ISO 80 000. + https://www.iso.org/obp/ui/#iso:std:iso:80000:-1:ed-1:v1:en + ISO80000Reference + Corresponding item number in ISO 80 000. + 3-1.1 (ISO80000 reference to length) - - - - qudtReference - URL to corresponing entity in QUDT. - http://www.qudt.org/2.1/catalog/qudt-catalog.html - qudtReference - URL to corresponing entity in QUDT. + + + + ISO9000Reference + ISO9000Reference - - - - - - uneceCommonCode - The UN/CEFACT Recommendation 20 provides three character alphabetic and alphanumeric codes for representing units of measurement for length, area, volume/capacity, mass (weight), time, and other quantities used in international trade. The codes are intended for use in manual and/or automated systems for the exchange of information between participants in international trade. - uneceCommonCode - The UN/CEFACT Recommendation 20 provides three character alphabetic and alphanumeric codes for representing units of measurement for length, area, volume/capacity, mass (weight), time, and other quantities used in international trade. The codes are intended for use in manual and/or automated systems for the exchange of information between participants in international trade. + + - - + + + + wikidataReference + URL corresponding to entry in Wikidata. + https://www.wikidata.org/ + wikidataReference + URL corresponding to entry in Wikidata. @@ -2003,75 +1998,72 @@ A proper part is then the disjoint union of: spatial part, temporal part and spa URL for the entry in the International Electrotechnical Vocabulary (IEV). - - - - - + - - + + + + OWLDLRestrictedAxiom + Axiom not included in the theory because of OWL 2 DL global restrictions for decidability. + OWLDLRestrictedAxiom + Axiom not included in the theory because of OWL 2 DL global restrictions for decidability. - + + + contact + A person or organisation acting as a contact point for enquiries about the ontology resource + The annotation should include an email address. + contact + A person or organisation acting as a contact point for enquiries about the ontology resource + The annotation should include an email address. - - - - - - + + + + ISO14040Reference + ISO14040Reference - - + + - - iupacReference - DOI to corresponding concept in IUPAC - https://goldbook.iupac.org/ - iupacReference - - - - + + figure + A link to a graphical representation aimed to facilitate understanding of the concept, or of an annotation. + figure + A link to a graphical representation aimed to facilitate understanding of the concept, or of an annotation. - - + + - - - - ISO9000Reference - ISO9000Reference + + - + - - + + - + - - - - ISO14040Reference - ISO14040Reference + + - + @@ -2079,166 +2071,75 @@ A proper part is then the disjoint union of: spatial part, temporal part and spa - + - - - - - - - - - - GaugePressure - GaugePressure - https://www.wikidata.org/wiki/Q109594211 - 4-14.2 - - - - - - MechanicalQuantity - Quantities categorised according to ISO 80000-4. - MechanicalQuantity - Quantities categorised according to ISO 80000-4. - + + + - - - - - - - - - - - - - - - - - - - AntiMatter - Antimatter is matter that is composed only of the antiparticles of those that constitute ordinary matter. - This branch is not expanded due to the limited use of such entities. - AntiMatter - Antimatter is matter that is composed only of the antiparticles of those that constitute ordinary matter. - This branch is not expanded due to the limited use of such entities. - + + + - + - - - - - - - - + + - - + + - - SamplePreparation - - Sample preparation processes (e.g., machining, polishing, cutting to size, etc.) before actual observation and measurement. - SamplePreparation - Sample preparation processes (e.g., machining, polishing, cutting to size, etc.) before actual observation and measurement. + + + CharacterisationMeasurementInstrument + Device used for making measurements, alone or in conjunction with one or more supplementary +devices +NOTE 1 A measuring instrument that can be used alone for making measurements is a measuring system. +NOTE 2 A measuring instrument is either an indicating measuring instrument or a material measure. + The instrument used for characterising a material, which usually has a probe and a detector as parts. + CharacterisationMeasurementInstrument + Device used for making measurements, alone or in conjunction with one or more supplementary +devices +NOTE 1 A measuring instrument that can be used alone for making measurements is a measuring system. +NOTE 2 A measuring instrument is either an indicating measuring instrument or a material measure. + The instrument used for characterising a material, which usually has a probe and a detector as parts. + In nanoindentation is the nanoindenter + Measuring instrument - - - - CharacterisationProcedure - - Characterisation procedure may refer to the full characterisation process or just a part of the full process. - The process of performing characterisation by following some existing formalised operative rules. - CharacterisationProcedure - The process of performing characterisation by following some existing formalised operative rules. - Sample preparation -Sample inspection -Calibration -Microscopy -Viscometry -Data sampling - Characterisation procedure may refer to the full characterisation process or just a part of the full process. - + + + + MeasuringInstrument + A measuring instrument that can be used alone is a measuring system. + Device used for making measurements, alone or in conjunction with one or more supplementary devices. - - - - - - - - - - - - - - CausalStructure - A causal structure expresses itself in time and space thanks to the underlying causality relations between its constituent quantum entities. It must at least provide two temporal parts. -The unity criterion beyond the definition of a causal structure (the most general concept of structure) is the existence of an undirected causal path between each of its parts. - A self-connected composition of more than one quantum entities. - The most fundamental unity criterion for the definition of an structure is that: -- is made of at least two quantums (a structure is not a simple entity) -- all quantum parts form a causally connected graph - The union of CausalPath and CausalSystem classes. - CausalObject - CausalStructure - The most fundamental unity criterion for the definition of an structure is that: -- is made of at least two quantums (a structure is not a simple entity) -- all quantum parts form a causally connected graph - The union of CausalPath and CausalSystem classes. - A self-connected composition of more than one quantum entities. - A causal structure expresses itself in time and space thanks to the underlying causality relations between its constituent quantum entities. It must at least provide two temporal parts. -The unity criterion beyond the definition of a causal structure (the most general concept of structure) is the existence of an undirected causal path between each of its parts. - +-- VIM + MeasuringInstrument + Device used for making measurements, alone or in conjunction with one or more supplementary devices. - - - - Procedure - A procedure can be considered as an intentional process with a plan. - The process in which an agent works with some entities according to some existing formalised operative rules. - The set of established forms or methods of an organized body for accomplishing a certain task or tasks (Wiktionary). - Elaboration - Work - Procedure - The set of established forms or methods of an organized body for accomplishing a certain task or tasks (Wiktionary). - The process in which an agent works with some entities according to some existing formalised operative rules. - The process in which a control unit of a CPU (the agent) orchestrates some cached binary data according to a list of instructions (e.g. a program). -The process in which a librarian order books alphabetically on a shelf. -The execution of an algorithm. - A procedure can be considered as an intentional process with a plan. +-- VIM + measuring instrument - - - - Hardening - Heat treatment process that generally produces martensite in the matrix. - Hardening - Heat treatment process that generally produces martensite in the matrix. + + + + CharacterisationHardware + Whatever hardware is used during the characterisation process. + CharacterisationHardware + Whatever hardware is used during the characterisation process. - + @@ -2253,306 +2154,431 @@ The execution of an algorithm. - - + + - Declarer - An interpreter who establish the connection between an conventional sign and an object according to a specific convention. - Declarer - An interpreter who establish the connection between an conventional sign and an object according to a specific convention. - A scientist that assigns a quantity to a physical objects without actually measuring it but taking it for granted due to its previous experience (e.g. considering an electron charge as 1.6027663e-19 C, assigning a molecular mass to a gas only by the fact of a name on the bottle). - Someone who assigns a name to an object. + Conventional + A 'Sign' that stands for an 'Object' through convention, norm or habit, without any resemblance to it. + In Peirce semiotics this kind of sign category is called symbol. However, since symbol is also used in formal languages, the name is changed in conventional. + Conventional + A 'Sign' that stands for an 'Object' through convention, norm or habit, without any resemblance to it. - - - - + + + - - T-1 L0 M+1 I0 Θ0 N0 J0 + + - - MassPerTimeUnit - MassPerTimeUnit + + + + Nucleus + The small, dense region at the centre of an atom consisting of protons and neutrons. + Nucleus + The small, dense region at the centre of an atom consisting of protons and neutrons. - - - - SIDimensionalUnit - Dimensional unit with its physical dimensionality described accortind to the International System of Units (SI). - In SI are the physical dimensions of the base quantities time (T), length (L), mass (M), electric current (I), thermodynamic temperature (Θ), amount of substance (N) and luminous intensity (J). - -In general the dimension of any quantity Q is written in the form of a dimensional product, - - dim Q = T^α L^β M^γ I^δ Θ^ε N^ζ J^η - -where the exponents α, β, γ, δ, ε, ζ and η, which are generally small integers, which can be positive, negative, or zero, are called the dimensional exponents. --- SI brouchure + + + + + + + + + + + + + + + + + + + + Matter + A matter entity exclude the presence of (real) fundamental bosons parts. However, it implies the presence of virtual bosons that are responsible of the interactions between the (real) fundamental fermions. + A physical object made of fermionic quantum parts. + The interpretation of the term "matter" is not univocal. Several concepts are labelled with this term, depending on the field of science. The concept mass is sometimes related to the term "matter", even if the former refers to a physical quantity (precisely defined by modern physics) while the latter is a type that qualifies a physical entity. +It is possible to identify more than one concept that can be reasonably labelled with the term "matter". For example, it is possible to label as matter only the entities that are made up of atoms. Or more generally, we can be more fine-grained and call "matter" the entities that are made up of protons, neutrons or electrons, so that we can call matter also a neutron radiation or a cathode ray. +A more fundamental approach, that we embrace for the EMMO, considers matter as entities that are made of fermions (i.e. quarks and leptons). This would exclude particles like the W and Z bosons that possess some mass, but are not fermions. +Antimatter is a subclass of matter. + PhysicalSubstance + Matter + The interpretation of the term "matter" is not univocal. Several concepts are labelled with this term, depending on the field of science. The concept mass is sometimes related to the term "matter", even if the former refers to a physical quantity (precisely defined by modern physics) while the latter is a type that qualifies a physical entity. +It is possible to identify more than one concept that can be reasonably labelled with the term "matter". For example, it is possible to label as matter only the entities that are made up of atoms. Or more generally, we can be more fine-grained and call "matter" the entities that are made up of protons, neutrons or electrons, so that we can call matter also a neutron radiation or a cathode ray. +A more fundamental approach, that we embrace for the EMMO, considers matter as entities that are made of fermions (i.e. quarks and leptons). This would exclude particles like the W and Z bosons that possess some mass, but are not fermions. +Antimatter is a subclass of matter. + A physical object made of fermionic quantum parts. + A matter entity exclude the presence of (real) fundamental bosons parts. However, it implies the presence of virtual bosons that are responsible of the interactions between the (real) fundamental fermions. + Matter includes ordinary- and anti-matter. It is possible to have entities that are made of particle and anti-particles (e.g. mesons made of a quark and an anti-quark pair) so that it is possible to have entities that are somewhat heterogeneous with regards to this distinction. + -The SI dimensional units are equivalent to dimensional strings that uniquely defines their dimensionality by specifying the values of the coefficients α, β, γ, δ, ε, ζ and η. A dimensional string is a space-separated string of the physical dimension symbols followed by the value of the exponent (including it sign). They should always match the following regular expression: + + + + + + + + + + + + + + + CompositePhysicalParticle + A composite particle is a bound state of elementary particles for which it is still possible to define its bosonic or fermionic behaviour. + CompositePhysicalParticle + A composite particle is a bound state of elementary particles for which it is still possible to define its bosonic or fermionic behaviour. + -^T([+-][1-9]|0) L([+-][1-9]|0) M([+-][1-9]|0) I([+-][1-9]|0) Θ([+-][1-9]|0) N([+-][1-9]|0) J([+-][1-9]|0)$ + + + DiscreteData + A discrete schema may be based on a continuum material basis that is filtered according to its variations. For example, a continuous voltage based signal can be considered 1 or 0 according to some threshold. +Discrete does not mean tha the material basis is discrete, but that the data are encoded according to such step-based rules. + Data whose variations are decoded according to a discrete schema. + DiscreteData + Data whose variations are decoded according to a discrete schema. + A text is a collection of discrete symbols. A compact disc is designed to host discrete states in the form of pits and lands. + A discrete schema may be based on a continuum material basis that is filtered according to its variations. For example, a continuous voltage based signal can be considered 1 or 0 according to some threshold. +Discrete does not mean tha the material basis is discrete, but that the data are encoded according to such step-based rules. + -Examples of correspondance between dimensional units and their dimensional units are: + + + + + + + + + + + + + + FundamentalAntiMatterParticle + FundamentalAntiMatterParticle + -- AmountOfSubstanceUnit <=> "T0 L0 M0 I0 Θ0 N+1 J0" -- TimeUnit <=> "T+1 L0 M0 I0 Θ0 N0 J0" -- ElectricCurrentDensityUnit <=> "T0 L-2 M0 I+1 Θ0 N0 J0" - SIDimensionalUnit - Dimensional unit with its physical dimensionality described accortind to the International System of Units (SI). - In SI are the physical dimensions of the base quantities time (T), length (L), mass (M), electric current (I), thermodynamic temperature (Θ), amount of substance (N) and luminous intensity (J). + + + + PlasmaCutting + PlasmaCutting + -In general the dimension of any quantity Q is written in the form of a dimensional product, + + + + ThermalCutting + Thermal ablation is the separation of material particles in solid, liquid or gaseous state by heat processes as well as the removal of these material particles by mechanical or electromagnetic forces (from: DIN + Thermisches Abtragen + ThermalCutting + Thermal ablation is the separation of material particles in solid, liquid or gaseous state by heat processes as well as the removal of these material particles by mechanical or electromagnetic forces (from: DIN + - dim Q = T^α L^β M^γ I^δ Θ^ε N^ζ J^η + + + + + + + + + + + + Sign + A 'Sign' can have temporal-direct-parts which are 'Sign' themselves. -where the exponents α, β, γ, δ, ε, ζ and η, which are generally small integers, which can be positive, negative, or zero, are called the dimensional exponents. --- SI brouchure +A 'Sign' usually havs 'sign' spatial direct parts only up to a certain elementary semiotic level, in which the part is only a 'Physical' and no more a 'Sign' (i.e. it stands for nothing). This elementary semiotic level is peculiar to each particular system of signs (e.g. text, painting). -The SI dimensional units are equivalent to dimensional strings that uniquely defines their dimensionality by specifying the values of the coefficients α, β, γ, δ, ε, ζ and η. A dimensional string is a space-separated string of the physical dimension symbols followed by the value of the exponent (including it sign). They should always match the following regular expression: +Just like an 'Elementary' in the 'Physical' branch, each 'Sign' branch should have an a-tomistic mereological part. + According to Peirce, 'Sign' includes three subcategories: +- symbols: that stand for an object through convention +- indeces: that stand for an object due to causal continguity +- icons: that stand for an object due to similitudes e.g. in shape or composition + An 'Physical' that is used as sign ("semeion" in greek) that stands for another 'Physical' through an semiotic process. + Sign + An 'Physical' that is used as sign ("semeion" in greek) that stands for another 'Physical' through an semiotic process. + A novel is made of chapters, paragraphs, sentences, words and characters (in a direct parthood mereological hierarchy). -^T([+-][1-9]|0) L([+-][1-9]|0) M([+-][1-9]|0) I([+-][1-9]|0) Θ([+-][1-9]|0) N([+-][1-9]|0) J([+-][1-9]|0)$ +Each of them are 'sign'-s. -Examples of correspondance between dimensional units and their dimensional units are: +A character can be the a-tomistic 'sign' for the class of texts. -- AmountOfSubstanceUnit <=> "T0 L0 M0 I0 Θ0 N+1 J0" -- TimeUnit <=> "T+1 L0 M0 I0 Θ0 N0 J0" -- ElectricCurrentDensityUnit <=> "T0 L-2 M0 I+1 Θ0 N0 J0" - +The horizontal segment in the character "A" is direct part of "A" but it is not a 'sign' itself. - - - - LightAndRadiationQuantity - Quantities categorised according to ISO 80000-7. - LightAndRadiationQuantity - Quantities categorised according to ISO 80000-7. +For plain text we can propose the ASCII symbols, for math the fundamental math symbols. - + - - ISO80000Categorised - ISO80000Categorised - - - - - RedStrangeQuark - RedStrangeQuark + + + CoefficientOfFriction + Dimensionless scalar value which describes the ratio of the force of friction between two bodies and the force pressing them together; depends on the materials used, ranges from near zero to greater than one. + FrictionCoefficient + FrictionFactor + CoefficientOfFriction + https://www.wikidata.org/wiki/Q1932524 + Dimensionless scalar value which describes the ratio of the force of friction between two bodies and the force pressing them together; depends on the materials used, ranges from near zero to greater than one. + https://doi.org/10.1351/goldbook.F02530 - + - - + + - - RecombinationCoefficient - Coefficient in the law of recombination, - RecombinationCoefficient - https://qudt.org/vocab/quantitykind/RecombinationCoefficient - https://www.wikidata.org/wiki/Q98842099 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-06-47 - 10-63 - Coefficient in the law of recombination, - - - - - - - ISQDerivedQuantity - Derived quantities defined in the International System of Quantities (ISQ). - ISQDerivedQuantity - Derived quantities defined in the International System of Quantities (ISQ). + ISQDimensionlessQuantity + A quantity to which no physical dimension is assigned and with a corresponding unit of measurement in the SI of the unit one. + ISQDimensionlessQuantity + http://qudt.org/vocab/quantitykind/Dimensionless + A quantity to which no physical dimension is assigned and with a corresponding unit of measurement in the SI of the unit one. + https://en.wikipedia.org/wiki/Dimensionless_quantity + https://doi.org/10.1351/goldbook.D01742 - + - AtomicAndNuclearPhysicsQuantity - Quantities categorised according to ISO 80000-10. - AtomicAndNuclearPhysicsQuantity - Quantities categorised according to ISO 80000-10. + MechanicalQuantity + Quantities categorised according to ISO 80000-4. + MechanicalQuantity + Quantities categorised according to ISO 80000-4. - - - - Concentration - the abundance of a constituent divided by the total volume of a mixture. - Concentration - https://qudt.org/vocab/quantitykind/Concentration - https://www.wikidata.org/wiki/Q3686031 - https://dbpedia.org/page/Concentration - the abundance of a constituent divided by the total volume of a mixture. - https://en.wikipedia.org/wiki/Concentration - https://goldbook.iupac.org/terms/view/C01222 + + + + + + MetricPrefix + Dimensionless multiplicative unit prefix. + https://en.wikipedia.org/wiki/Metric_prefix + MetricPrefix + Dimensionless multiplicative unit prefix. - - + + + + Constant + A variable that stand for a numerical constant, even if it is unknown. + Constant + A variable that stand for a numerical constant, even if it is unknown. + + + + + + Metrological + A language entity used in the metrology discipline. + Metrology is the science of measurement and its application and includes all theoretical and practical aspects of measurement, whatever the measurement uncertainty and field of application (VIM3 2.2) + Metrological + A language entity used in the metrology discipline. + Metrology is the science of measurement and its application and includes all theoretical and practical aspects of measurement, whatever the measurement uncertainty and field of application (VIM3 2.2) + + + + + + Symbol + Subclasses of 'Symbol' are alphabets, in formal languages terminology. A 'Symbol' is atomic for that alphabet, i.e. it has no parts that are symbols for the same alphabet. +e.g. a math symbol is not made of other math symbols +A Symbol may be a String in another language. +e.g. "Bq" is the symbol for Becquerel units when dealing with metrology, or a string of "B" and "q" symbols when dealing with characters. + The class of individuals that stand for an elementary mark of a specific symbolic code (alphabet). + AlphabeticEntity + Symbol + The class of individuals that stand for an elementary mark of a specific symbolic code (alphabet). + The class of letter "A" is the symbol as idea and the letter A that you see on the screen is the mark that can be represented by an individual belonging to "A". + Subclasses of 'Symbol' are alphabets, in formal languages terminology. A 'Symbol' is atomic for that alphabet, i.e. it has no parts that are symbols for the same alphabet. +e.g. a math symbol is not made of other math symbols +A Symbol may be a String in another language. +e.g. "Bq" is the symbol for Becquerel units when dealing with metrology, or a string of "B" and "q" symbols when dealing with characters. + Symbols of a formal language need not be symbols of anything. For instance there are logical constants which do not refer to any idea, but rather serve as a form of punctuation in the language (e.g. parentheses). + +Symbols of a formal language must be capable of being specified without any reference to any interpretation of them. +(Wikipedia) + The class is the idea of the symbol, while the individual of that class stands for a specific mark (or token) of that idea. + + + + - - - - - - + + - - Task - A procedure that is an hoilistic part of a workflow. - A task is a generic part of a workflow, without taking care of the task granularities. -It means that you can declare that e.g. tightening a bolt is a task of building an airplane, without caring of the coarser tasks to which this tightening belongs. - Job - Task - A procedure that is an hoilistic part of a workflow. - A task is a generic part of a workflow, without taking care of the task granularities. -It means that you can declare that e.g. tightening a bolt is a task of building an airplane, without caring of the coarser tasks to which this tightening belongs. - - - - - - - - - - - - - - - - Boson - A physical particle with integer spin that follows Bose–Einstein statistics. - Boson - A physical particle with integer spin that follows Bose–Einstein statistics. - https://en.wikipedia.org/wiki/Boson + + + AbsorbedDoseRate + Differential quotient of the absorbed dose with respect to time. + AbsorbedDoseRate + https://qudt.org/vocab/quantitykind/AbsorbedDoseRate + https://www.wikidata.org/wiki/Q69428958 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-12-07 + 10-84 + Differential quotient of the absorbed dose with respect to time. - - - - CathodicStrippingVoltammetry - Stripping voltammetry in which material accumulated at the working electrode is electrochemically reduced in the stripping step. A peak-shaped cathodic stripping voltammogram is obtained. Peak current depends on time of accumulation, mass transport of analyte (stirring), scan rate and mode (linear or pulse), and analyte concentration in solution. - CSV - CathodicStrippingVoltammetry - https://www.wikidata.org/wiki/Q4016325 - Stripping voltammetry in which material accumulated at the working electrode is electrochemically reduced in the stripping step. A peak-shaped cathodic stripping voltammogram is obtained. Peak current depends on time of accumulation, mass transport of analyte (stirring), scan rate and mode (linear or pulse), and analyte concentration in solution. - https://doi.org/10.1515/pac-2018-0109 + + + + + ISQDerivedQuantity + Derived quantities defined in the International System of Quantities (ISQ). + ISQDerivedQuantity + Derived quantities defined in the International System of Quantities (ISQ). - - - - StrippingVoltammetry - - Anodic stripping voltammetry (ASV) was historically used to measure concentrations of metal ions in solution using cathodic accumulation with mercury to form an amalgam. Due to the toxicity of mercury and its compounds, inductively coupled plasma optical emission spectrometry and inductively coupled plasma mass spectrometry have frequently replaced ASV at mercury electrodes in the laboratory, often sacrificing the probing of speciation and lability in complex matrices. Mercury has now been replaced by non-toxic bismuth or anti- mony as films on a solid electrode support (such as glassy carbon) with equally good sensi- tivity and detection limits. - Because the accumulation (pre-concentration) step can be prolonged, increasing the amount of material at the electrode, stripping voltammetry is able to measure very small concentrations of analyte. - Often the product of the electrochemical stripping is identical to the analyte before the accumulation. - Stripping voltammetry is a calibrated method to establish the relation between amount accumulated in a given time and the concentration of the analyte in solution. - Types of stripping voltammetry refer to the kind of accumulation (e.g. adsorptive stripping voltammetry) or the polarity of the stripping electrochemistry (anodic, cathodic stripping voltammetry). - two-step electrochemical measurement in which 1) material is accumulated at an electrode and 2) the amount of an accumulated species is measured by voltammetry. The measured electric current in step 2 is related to the concentration of analyte in the solution by calibration. - StrippingVoltammetry - two-step electrochemical measurement in which 1) material is accumulated at an electrode and 2) the amount of an accumulated species is measured by voltammetry. The measured electric current in step 2 is related to the concentration of analyte in the solution by calibration. - https://en.wikipedia.org/wiki/Electrochemical_stripping_analysis - https://doi.org/10.1515/pac-2018-0109 + + + + AtomicAndNuclearPhysicsQuantity + Quantities categorised according to ISO 80000-10. + AtomicAndNuclearPhysicsQuantity + Quantities categorised according to ISO 80000-10. - - - - SolidLiquidSuspension - A coarse dispersion of liquid in a solid continuum phase. - SolidLiquidSuspension - A coarse dispersion of liquid in a solid continuum phase. + + + + ManufacturingDevice + A device that is designed to participate to a manufacturing process. + ManufacturingDevice + A device that is designed to participate to a manufacturing process. - - - - - DebyeWallerFactor - Factor by which the intensity of a diffraction line is reduced because of the lattice vibrations. - DebyeWallerFactor - https://qudt.org/vocab/quantitykind/Debye-WallerFactor - https://www.wikidata.org/wiki/Q902587 - 12-8 - Factor by which the intensity of a diffraction line is reduced because of the lattice vibrations. + + + + Device + An object which is instrumental for reaching a particular purpose through its characteristic functioning process, with particular reference to mechanical or electronic equipment. + Equipment + Machine + Device + An object which is instrumental for reaching a particular purpose through its characteristic functioning process, with particular reference to mechanical or electronic equipment. - + - - + + - ISQDimensionlessQuantity - A quantity to which no physical dimension is assigned and with a corresponding unit of measurement in the SI of the unit one. - ISQDimensionlessQuantity - http://qudt.org/vocab/quantitykind/Dimensionless - A quantity to which no physical dimension is assigned and with a corresponding unit of measurement in the SI of the unit one. - https://en.wikipedia.org/wiki/Dimensionless_quantity - https://doi.org/10.1351/goldbook.D01742 + + MolarEntropy + Entropy per amount of substance. + MolarEntropy + https://qudt.org/vocab/quantitykind/MolarEntropy + https://www.wikidata.org/wiki/Q68972876 + 9-8 + Entropy per amount of substance. - + - CondensedMatterPhysicsQuantity - Quantities categorised according to ISO 80000-12. - CondensedMatterPhysicsQuantity - Quantities categorised according to ISO 80000-12. + PhysioChemicalQuantity + Quantities categorised according to ISO 80000-9. + PhysioChemicalQuantity + Quantities categorised according to ISO 80000-9. - - - - TightlyCoupledModelsSimulation - A simulation in which more than one model are solved together with a coupled method. - TightlyCoupledModelsSimulation - A simulation in which more than one model are solved together with a coupled method. - Solving within the same linear system the discretised form of the pressure and momentum equation for a fluid, using the ideal gas law as material relation for connecting pressure to density. + + + VectorMeson + A meson with total spin 1 and odd parit. + VectorMeson + A meson with total spin 1 and odd parit. + https://en.wikipedia.org/wiki/Vector_meson - - - + + + - - - - - - + + + T-1 L+3 M0 I-1 Θ0 N0 J0 + - Coupled - Coupled + ReciprocalElectricChargeDensityUnit + ReciprocalElectricChargeDensityUnit - - - - - MolecularEntity - Any constitutionally or isotopically distinct atom, molecule, ion, ion pair, radical, radical ion, complex, conformer etc., identifiable as a separately distinguishable entity that can undergo a chemical reaction. - Molecular entity is used as a general term for singular entities, irrespective of their nature, while chemical species stands for sets or ensembles of molecular entities. + + + + SIDimensionalUnit + Dimensional unit with its physical dimensionality described accortind to the International System of Units (SI). + In SI are the physical dimensions of the base quantities time (T), length (L), mass (M), electric current (I), thermodynamic temperature (Θ), amount of substance (N) and luminous intensity (J). + +In general the dimension of any quantity Q is written in the form of a dimensional product, + + dim Q = T^α L^β M^γ I^δ Θ^ε N^ζ J^η + +where the exponents α, β, γ, δ, ε, ζ and η, which are generally small integers, which can be positive, negative, or zero, are called the dimensional exponents. +-- SI brouchure + +The SI dimensional units are equivalent to dimensional strings that uniquely defines their dimensionality by specifying the values of the coefficients α, β, γ, δ, ε, ζ and η. A dimensional string is a space-separated string of the physical dimension symbols followed by the value of the exponent (including it sign). They should always match the following regular expression: + +^T([+-][1-9]|0) L([+-][1-9]|0) M([+-][1-9]|0) I([+-][1-9]|0) Θ([+-][1-9]|0) N([+-][1-9]|0) J([+-][1-9]|0)$ + +Examples of correspondance between dimensional units and their dimensional units are: + +- AmountOfSubstanceUnit <=> "T0 L0 M0 I0 Θ0 N+1 J0" +- TimeUnit <=> "T+1 L0 M0 I0 Θ0 N0 J0" +- ElectricCurrentDensityUnit <=> "T0 L-2 M0 I+1 Θ0 N0 J0" + SIDimensionalUnit + Dimensional unit with its physical dimensionality described accortind to the International System of Units (SI). + In SI are the physical dimensions of the base quantities time (T), length (L), mass (M), electric current (I), thermodynamic temperature (Θ), amount of substance (N) and luminous intensity (J). + +In general the dimension of any quantity Q is written in the form of a dimensional product, + + dim Q = T^α L^β M^γ I^δ Θ^ε N^ζ J^η + +where the exponents α, β, γ, δ, ε, ζ and η, which are generally small integers, which can be positive, negative, or zero, are called the dimensional exponents. +-- SI brouchure + +The SI dimensional units are equivalent to dimensional strings that uniquely defines their dimensionality by specifying the values of the coefficients α, β, γ, δ, ε, ζ and η. A dimensional string is a space-separated string of the physical dimension symbols followed by the value of the exponent (including it sign). They should always match the following regular expression: + +^T([+-][1-9]|0) L([+-][1-9]|0) M([+-][1-9]|0) I([+-][1-9]|0) Θ([+-][1-9]|0) N([+-][1-9]|0) J([+-][1-9]|0)$ + +Examples of correspondance between dimensional units and their dimensional units are: + +- AmountOfSubstanceUnit <=> "T0 L0 M0 I0 Θ0 N+1 J0" +- TimeUnit <=> "T+1 L0 M0 I0 Θ0 N0 J0" +- ElectricCurrentDensityUnit <=> "T0 L-2 M0 I+1 Θ0 N0 J0" + + + + + + + MolecularEntity + Any constitutionally or isotopically distinct atom, molecule, ion, ion pair, radical, radical ion, complex, conformer etc., identifiable as a separately distinguishable entity that can undergo a chemical reaction. + Molecular entity is used as a general term for singular entities, irrespective of their nature, while chemical species stands for sets or ensembles of molecular entities. Note that the name of a compound may refer to the respective molecular entity or to the chemical species, https://goldbook.iupac.org/terms/view/M03986 ChemicalEntity @@ -2565,252 +2591,144 @@ Note that the name of a compound may refer to the respective molecular entity or This concept is strictly related to chemistry. For this reason an atom can be considered the smallest entity that can be considered "molecular", including nucleus when they are seen as ions (e.g. H⁺, He⁺⁺). - - - - - - - - - - - - - - - - - - - - Matter - A matter entity exclude the presence of (real) fundamental bosons parts. However, it implies the presence of virtual bosons that are responsible of the interactions between the (real) fundamental fermions. - A physical object made of fermionic quantum parts. - The interpretation of the term "matter" is not univocal. Several concepts are labelled with this term, depending on the field of science. The concept mass is sometimes related to the term "matter", even if the former refers to a physical quantity (precisely defined by modern physics) while the latter is a type that qualifies a physical entity. -It is possible to identify more than one concept that can be reasonably labelled with the term "matter". For example, it is possible to label as matter only the entities that are made up of atoms. Or more generally, we can be more fine-grained and call "matter" the entities that are made up of protons, neutrons or electrons, so that we can call matter also a neutron radiation or a cathode ray. -A more fundamental approach, that we embrace for the EMMO, considers matter as entities that are made of fermions (i.e. quarks and leptons). This would exclude particles like the W and Z bosons that possess some mass, but are not fermions. -Antimatter is a subclass of matter. - PhysicalSubstance - Matter - The interpretation of the term "matter" is not univocal. Several concepts are labelled with this term, depending on the field of science. The concept mass is sometimes related to the term "matter", even if the former refers to a physical quantity (precisely defined by modern physics) while the latter is a type that qualifies a physical entity. -It is possible to identify more than one concept that can be reasonably labelled with the term "matter". For example, it is possible to label as matter only the entities that are made up of atoms. Or more generally, we can be more fine-grained and call "matter" the entities that are made up of protons, neutrons or electrons, so that we can call matter also a neutron radiation or a cathode ray. -A more fundamental approach, that we embrace for the EMMO, considers matter as entities that are made of fermions (i.e. quarks and leptons). This would exclude particles like the W and Z bosons that possess some mass, but are not fermions. -Antimatter is a subclass of matter. - A physical object made of fermionic quantum parts. - A matter entity exclude the presence of (real) fundamental bosons parts. However, it implies the presence of virtual bosons that are responsible of the interactions between the (real) fundamental fermions. - Matter includes ordinary- and anti-matter. It is possible to have entities that are made of particle and anti-particles (e.g. mesons made of a quark and an anti-quark pair) so that it is possible to have entities that are somewhat heterogeneous with regards to this distinction. - - - - - - - - - + + + + + - - + - - - - CompositePhysicalParticle - A composite particle is a bound state of elementary particles for which it is still possible to define its bosonic or fermionic behaviour. - CompositePhysicalParticle - A composite particle is a bound state of elementary particles for which it is still possible to define its bosonic or fermionic behaviour. - - - - - - - - - T+1 L0 M0 I+1 Θ0 N-1 J0 + + - - ElectricChargePerAmountUnit - ElectricChargePerAmountUnit + + JunctionTile + A direct part that is obtained by partitioning a whole hybridly in spatial, temporal and spatiotemporal parts. + JunctionTile + A direct part that is obtained by partitioning a whole hybridly in spatial, temporal and spatiotemporal parts. - - - - - - - - - - - - - - - + + - - - - - - - - - + + - - - - - - - - - - - - CausalPath - A causal chain is an ordered causal sequence of entities that does not host any bifurcation within itself (a chain). A chain can only be partitioned in time. - The class of entities that possess a temporal structure but no spatial structure. - CausalChain - Elementary - CausalPath - A causal chain is an ordered causal sequence of entities that does not host any bifurcation within itself (a chain). A chain can only be partitioned in time. - The class of entities that possess a temporal structure but no spatial structure. - An electron with at least one causal interaction with another particle. - hasTemporalPart min 2 (Elementary or Quantum) + + Time + One-dimensional subspace of space-time, which is locally orthogonal to space. + The indefinite continued progress of existence and events that occur in apparently irreversible succession from the past through the present to the future. + Time can be seen as the duration of an event or, more operationally, as "what clocks read". + Time + http://qudt.org/vocab/quantitykind/Time + One-dimensional subspace of space-time, which is locally orthogonal to space. + 3-7 + The indefinite continued progress of existence and events that occur in apparently irreversible succession from the past through the present to the future. + https://doi.org/10.1351/goldbook.T06375 - + - - - - - T-3 L-1 M+1 I0 Θ0 N0 J0 - - - PressurePerTimeUnit - PressurePerTimeUnit - - - - - - PrecipitationHardening - hardening of a workpiece caused by the precipitation of one or more compounds from a supersaturated solid solution - PrecipitationHardening - hardening of a workpiece caused by the precipitation of one or more compounds from a supersaturated solid solution + + SpaceAndTimeQuantity + Quantities categorised according to ISO 80000-3. + SpaceAndTimeQuantity + Quantities categorised according to ISO 80000-3. - - - - HeatTreatment - Heat to a temperature appropriate for the particular material, maintain at that temperature and then cool at an appropriate rate to reduce hardness, improve machinability or achieve desired properties. - wärmebehandeln - HeatTreatment - Heat to a temperature appropriate for the particular material, maintain at that temperature and then cool at an appropriate rate to reduce hardness, improve machinability or achieve desired properties. + + + CausalInteraction + A causal interaction is a fundamental causal system that is expressed as a complete bupartite directed graph K(m,n), when m=n. + CausalInteraction + A causal interaction is a fundamental causal system that is expressed as a complete bupartite directed graph K(m,n), when m=n. - - - - - Participant - An object which is an holistic spatial part of a process. - Participant - An object which is an holistic spatial part of a process. - A student during an examination. + + + + AnodicStrippingVoltammetry + Stripping voltammetry in which material accumulated at the working electrode is electrochemically oxi- dized in the stripping step. A peak-shaped anodic stripping voltammogram is obtained. Peak current depends on time of accumulation, mass transport of analyte (stirring), scan rate and mode (linear or pulse), and analyte concentration in solution. A solid electrode, carbon paste or composite electrode, bismuth film electrode, mercury film electrode, or static mercury drop electrode may be used. + AnodicStrippingVoltammetry + https://www.wikidata.org/wiki/Q939328 + Stripping voltammetry in which material accumulated at the working electrode is electrochemically oxi- dized in the stripping step. A peak-shaped anodic stripping voltammogram is obtained. Peak current depends on time of accumulation, mass transport of analyte (stirring), scan rate and mode (linear or pulse), and analyte concentration in solution. A solid electrode, carbon paste or composite electrode, bismuth film electrode, mercury film electrode, or static mercury drop electrode may be used. + https://doi.org/10.1515/pac-2018-0109 - - - Object - A continuant (here called object) is usually defined as a whole whose all possible temporal parts are always satisfying a specific criterion (wich is the classical definition of continuants). -However that's not possible in general, since we will finally end to temporal parts whose temporal extension is so small that the connectivity relations that define the object will no longer hold. That's the case when the temporal interval is lower than the interval that characterize the causality interactions between the object parts. -In other terms, if the time span of a temporal part is lower than the inverse of the frequency of interactions between the constituents, then the constituents in such temporal part are not connected. The object is no more an object, neither an item, but simply a collection of fundamental parts. -To overcome this issue, we can identify an minimum holistic temporal part (a lower time interval value), below which a specific definition for an object type does not hold anymore, that is called a fundamental. - A whole that is identified according to a criteria based on its spatial configuration that is satisfied throughout its time extension. - Continuant - Endurant - Object - A whole that is identified according to a criteria based on its spatial configuration that is satisfied throughout its time extension. - - - - - NonTemporalRole - An holistic spatial part of a whole. - HolisticSpatialPart - NonTemporalRole - An holistic spatial part of a whole. - - - + - - DataAnalysis + + StrippingVoltammetry - Data processing activities performed on the secondary data to determine the characterisation property (e.g. classification, quantification), which can be performed manually or exploiting a model. - DataAnalysis - Data processing activities performed on the secondary data to determine the characterisation property (e.g. classification, quantification), which can be performed manually or exploiting a model. + Anodic stripping voltammetry (ASV) was historically used to measure concentrations of metal ions in solution using cathodic accumulation with mercury to form an amalgam. Due to the toxicity of mercury and its compounds, inductively coupled plasma optical emission spectrometry and inductively coupled plasma mass spectrometry have frequently replaced ASV at mercury electrodes in the laboratory, often sacrificing the probing of speciation and lability in complex matrices. Mercury has now been replaced by non-toxic bismuth or anti- mony as films on a solid electrode support (such as glassy carbon) with equally good sensi- tivity and detection limits. + Because the accumulation (pre-concentration) step can be prolonged, increasing the amount of material at the electrode, stripping voltammetry is able to measure very small concentrations of analyte. + Often the product of the electrochemical stripping is identical to the analyte before the accumulation. + Stripping voltammetry is a calibrated method to establish the relation between amount accumulated in a given time and the concentration of the analyte in solution. + Types of stripping voltammetry refer to the kind of accumulation (e.g. adsorptive stripping voltammetry) or the polarity of the stripping electrochemistry (anodic, cathodic stripping voltammetry). + two-step electrochemical measurement in which 1) material is accumulated at an electrode and 2) the amount of an accumulated species is measured by voltammetry. The measured electric current in step 2 is related to the concentration of analyte in the solution by calibration. + StrippingVoltammetry + two-step electrochemical measurement in which 1) material is accumulated at an electrode and 2) the amount of an accumulated species is measured by voltammetry. The measured electric current in step 2 is related to the concentration of analyte in the solution by calibration. + https://en.wikipedia.org/wiki/Electrochemical_stripping_analysis + https://doi.org/10.1515/pac-2018-0109 - - - - - - - - - - - - - - - - - - - - - - DataProcessing - A computation that provides a data output following the elaboration of some input data, using a data processing application. - DataProcessing - A computation that provides a data output following the elaboration of some input data, using a data processing application. + + + + + MeanFreePathOfElectrons + Average distance that electrons travel between two successive interactions. + MeanFreePathOfElectrons + https://qudt.org/vocab/quantitykind/ElectronMeanFreePath + https://www.wikidata.org/wiki/Q105672307 + 12-15.2 + Average distance that electrons travel between two successive interactions. - + - - - Curvature - Inverse of the radius of curvature. - Curvature - https://qudt.org/vocab/quantitykind/CurvatureFromRadius - https://www.wikidata.org/wiki/Q214881 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-01-31 - https://dbpedia.org/page/Curvature - 3-2 - Inverse of the radius of curvature. + + + MeanFreePath + The mean free path may thus be specified either for all interactions, i.e. total mean free path, or for particular types of interaction such as scattering, capture, or ionization. + in a given medium, average distance that particles of a specified type travel between successive interactions of a specified type. + MeanFreePath + https://qudt.org/vocab/quantitykind/MeanFreePath + https://www.wikidata.org/wiki/Q756307 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-06-37 + 9-38 + in a given medium, average distance that particles of a specified type travel between successive interactions of a specified type. + https://doi.org/10.1351/goldbook.M03778 - + - SpaceAndTimeQuantity - Quantities categorised according to ISO 80000-3. - SpaceAndTimeQuantity - Quantities categorised according to ISO 80000-3. + CondensedMatterPhysicsQuantity + Quantities categorised according to ISO 80000-12. + CondensedMatterPhysicsQuantity + Quantities categorised according to ISO 80000-12. + + + + + + + PhaseCoefficient + Change of phase angle with the length along the path travelled by a plane wave. + The imaginary part of the propagation coefficient. + PhaseChangeCoefficient + PhaseCoefficient + https://qudt.org/vocab/quantitykind/PhaseCoefficient + https://www.wikidata.org/wiki/Q32745742 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-10-20 + 3-26.2 + Change of phase angle with the length along the path travelled by a plane wave. + The imaginary part of the propagation coefficient. + https://en.wikipedia.org/wiki/Propagation_constant#Phase_constant @@ -2831,670 +2749,701 @@ To overcome this issue, we can identify an minimum holistic temporal part (a low https://en.wikipedia.org/wiki/Reciprocal_length - - - - - - - T+4 L-3 M-1 I+2 Θ0 N0 J0 - - - PermittivityUnit - PermittivityUnit + + + + Gas + Gas is a compressible fluid, a state of matter that has no fixed shape and no fixed volume. + Gas + Gas is a compressible fluid, a state of matter that has no fixed shape and no fixed volume. - - - - - + + + + + + + - + + + + + + + - - + + + + Fluid + A continuum that has no fixed shape and yields easily to external pressure. + Fluid + A continuum that has no fixed shape and yields easily to external pressure. + Gas, liquid, plasma, + + + + + + + + + 2 - Estimation - A determination of an object without any actual interaction. - Estimation - A determination of an object without any actual interaction. + Collection + A collection is the concept that complements the item concept, being an entity that possesses at least one part non directly causally connected with the rest. +A collection can be partitioned in maximally connected items called members. The members are self-connected entities and there is no direct causality relation between them. +The combination of collection and item concepts is the EMMO mereocausality alternative to set theory. However, two items can be members only if they are non direct causally connected, giving some constraints to a collection definition. For example, two entities which are directly connected cannot be two distinct members, while their interiors (i.e. the entities obtained by removing the layer of parts that provides the causal contact between them) can be. + The class of not direct causally self-connected world entities. + Collection + A collection is the concept that complements the item concept, being an entity that possesses at least one part non directly causally connected with the rest. +A collection can be partitioned in maximally connected items called members. The members are self-connected entities and there is no direct causality relation between them. +The combination of collection and item concepts is the EMMO mereocausality alternative to set theory. However, two items can be members only if they are non direct causally connected, giving some constraints to a collection definition. For example, two entities which are directly connected cannot be two distinct members, while their interiors (i.e. the entities obtained by removing the layer of parts that provides the causal contact between them) can be. + The class of not direct causally self-connected world entities. + The collection of users of a particular software, the collection of atoms that have been part of that just dissociated molecule. - + - - - - HeatFlowRate - Amount of heat through a surface during a time interval divided by the duration of this interval. - HeatFlowRate - https://qudt.org/vocab/quantitykind/HeatFlowRate - https://www.wikidata.org/wiki/Q12160631 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-36 - 5-7 - Amount of heat through a surface during a time interval divided by the duration of this interval. + + + GapEnergy + Smallest energy difference between the lowest level of conduction band and the highest level of valence band at zero thermodynamic temperature. + BandgapEnergy + GapEnergy + https://www.wikidata.org/wiki/Q103982939 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-06-16 + 12-27.2 + Smallest energy difference between the lowest level of conduction band and the highest level of valence band at zero thermodynamic temperature. + https://doi.org/10.1351/goldbook.B00593 - + - + - - Power - Rate of transfer of energy per unit time. - Power - http://qudt.org/vocab/quantitykind/Power - 4-27 - 6-45 - Rate of transfer of energy per unit time. - https://doi.org/10.1351/goldbook.P04792 + Energy + A property of objects which can be transferred to other objects or converted into different forms. + Energy is often defined as "ability of a system to perform work", but it might be misleading since is not necessarily available to do work. + Energy + http://qudt.org/vocab/quantitykind/Energy + 5-20-1 + A property of objects which can be transferred to other objects or converted into different forms. + https://doi.org/10.1351/goldbook.E02101 - + - - ThermodynamicalQuantity - Quantities categorised according to ISO 80000-5. - ThermodynamicalQuantity - Quantities categorised according to ISO 80000-5. + + + + + T0 L0 M+1 I0 Θ0 N0 J0 + + + MassUnit + MassUnit - + - - - DensityOfHeatFlowRate - At a fixed point in a medium, the direction of propagation of heat is opposite to the temperature gradient. At a point on the surface separating two media with different temperatures, the direction of propagation of heat is normal to the surface, from higher to lower temperatures. - Vector quantity with magnitude equal to the heat flow rate dΦ through a surface element divided by the area dA of the element, and direction eφ in the direction of propagation of heat. - AreicHeatFlowRate - DensityOfHeatFlowRate - https://www.wikidata.org/wiki/Q1478382 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-37 - 5-8 - Vector quantity with magnitude equal to the heat flow rate dΦ through a surface element divided by the area dA of the element, and direction eφ in the direction of propagation of heat. - https://doi.org/10.1351/goldbook.H02755 - - - - - - Wavelength - Length of the repetition interval of a wave. - Wavelength - https://qudt.org/vocab/quantitykind/Wavelength - https://www.wikidata.org/wiki/Q41364 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-10-10 - https://dbpedia.org/page/Wavelength - 3-19 - Length of the repetition interval of a wave. - https://en.wikipedia.org/wiki/Wavelength - https://doi.org/10.1351/goldbook.W06659 + + ModulusOfAdmittance + ModulusOfAdmittance + https://qudt.org/vocab/quantitykind/ModulusOfAdmittance + https://www.wikidata.org/wiki/Q79466359 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-52 + 6-52.4 - + - - - - - - Length - Extend of a spatial dimension. - Length is a non-negative additive quantity attributed to a one-dimensional object in space. - Length - http://qudt.org/vocab/quantitykind/Length - 3-1.1 - Extend of a spatial dimension. - https://doi.org/10.1351/goldbook.L03498 - - - - - - - - + - Whole - A whole is always defined using a criterion expressed through the classical transitive parthood relation. -This class is expected to host the definition of world objects as they appear in its wholeness, dependently on some of their parts and independently on the surroundings. - A whole is categorized as fundamental (or maximal) or redundant (non-maximal). - The superclass of entities which are defined by requiring the existence of some parts (at least one) of specifically given types, where the specified types are different with respect to the type of the whole. - Whole - The superclass of entities which are defined by requiring the existence of some parts (at least one) of specifically given types, where the specified types are different with respect to the type of the whole. - A whole is always defined using a criterion expressed through the classical transitive parthood relation. -This class is expected to host the definition of world objects as they appear in its wholeness, dependently on some of their parts and independently on the surroundings. - - - - - - - - - - - - - - Holistic - A perspective characterized by the belief that some mereological parts of a whole (holistic parts) are intimately interconnected and explicable only by reference to the whole and vice versa. - An holistic perspective considers each part of the whole as equally important, without the need to position the parts within a hierarchy (in time or space). The interest is on the whole object and on its parts (how they contribute to the whole, i.e. their roles), without going further into specifying the spatial hierarchy or the temporal position of each part. - -This class allows the picking of parts without necessarily going trough a rigid hierarchy of spatial compositions (e.g. body -> organ -> cell -> molecule) or temporal composition. This is inline with the transitive nature of parthood, as it is usually defined in literature. - -The holistic perspective is not excluding the reductionistic perspective, on the contrary it can be considered its complement. - The union of classes whole and part. - Wholistic - Holistic - An holistic perspective considers each part of the whole as equally important, without the need to position the parts within a hierarchy (in time or space). The interest is on the whole object and on its parts (how they contribute to the whole, i.e. their roles), without going further into specifying the spatial hierarchy or the temporal position of each part. - -This class allows the picking of parts without necessarily going trough a rigid hierarchy of spatial compositions (e.g. body -> organ -> cell -> molecule) or temporal composition. This is inline with the transitive nature of parthood, as it is usually defined in literature. - -The holistic perspective is not excluding the reductionistic perspective, on the contrary it can be considered its complement. - The union of classes whole and part. - A perspective characterized by the belief that some mereological parts of a whole (holistic parts) are intimately interconnected and explicable only by reference to the whole and vice versa. - A molecule of a body can have role in the body evolution, without caring if its part of a specific organ and without specifying the time interval in which this role occurred. - A product is a role that can be fulfilled by many objects, but always requires a process to which the product participates and from which it is generated. + + + + ElectricConductance + Inverse of 'ElectricalResistance'. + Measure of the ease for electric current to pass through a material. + Conductance + ElectricConductance + http://qudt.org/vocab/quantitykind/Conductance + https://www.wikidata.org/wiki/Q309017 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-06 + 6-47 + Measure of the ease for electric current to pass through a material. + https://doi.org/10.1351/goldbook.E01925 - + - - - CarrierLifetime - Time constant for recombination or trapping of minority charge carriers in semiconductors - CarrierLifetime - https://qudt.org/vocab/quantitykind/CarrierLifetime - https://www.wikidata.org/wiki/Q5046374 - 12-32.2 - Time constant for recombination or trapping of minority charge carriers in semiconductors + + + ElectricSusceptibility + Electric polarization divided by electric constant and electric field strength. + ElectricSusceptibility + https://qudt.org/vocab/quantitykind/ElectricSusceptibility + https://www.wikidata.org/wiki/Q598305 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-12-19 + 6-16 + Electric polarization divided by electric constant and electric field strength. + https://en.wikipedia.org/wiki/Electric_susceptibility - + - - TimeConstant - parameter characterizing the response to a step input of a first‑order, linear time‑invariant system - TimeConstant - https://www.wikidata.org/wiki/Q1335249 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-05-26 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=351-45-32 - 3-15 - parameter characterizing the response to a step input of a first‑order, linear time‑invariant system + + ElectromagneticQuantity + Quantities categorised according to ISO 80000-6. + ElectromagneticQuantity + Quantities categorised according to ISO 80000-6. - - + + - - + + 1 + + IRI + An Internationalized Resource Identifier (IRI) is a compact sequence of characters that identifies an abstract or physical resource. It is similar to URI, but greatly extends the allowed character set from ASCII to the Universal Character Set. + IRIs are commonly used as identifiers for ontological entities, although the extended unicode character set is rarely used. + IRI + An Internationalized Resource Identifier (IRI) is a compact sequence of characters that identifies an abstract or physical resource. It is similar to URI, but greatly extends the allowed character set from ASCII to the Universal Character Set. + https://en.wiktionary.org/wiki/Ῥόδος + IRIs are commonly used as identifiers for ontological entities, although the extended unicode character set is rarely used. + https://en.wikipedia.org/wiki/Internationalized_Resource_Identifier + + + + - - - 1 + + + + + + - - QuantityValue - A quantity value is not necessarily a property, since it is possible to write "10 kg", without assigning this quantity to a specific object. - A symbolic that has parts a numerical object and a reference expressing the value of a quantity (expressed as the product of the numerical and the unit). - Following the International Vocabulary of Metrology (VIM), EMMO distinguishes between a quantity (a property) and the quantity value (a numerical and a reference). - -So, for the EMMO the symbol "kg" is not a physical quantity but simply a 'Symbolic' object categorized as a 'MeasurementUnit'. - -While the string "1 kg" is a 'QuantityValue'. - QuantityValue - A symbolic that has parts a numerical object and a reference expressing the value of a quantity (expressed as the product of the numerical and the unit). - 6.8 m -0.9 km -8 K -6 MeV -43.5 HRC(150 kg) - quantity value - A quantity value is not necessarily a property, since it is possible to write "10 kg", without assigning this quantity to a specific object. + + ResourceIdentifier + A formal computer-interpretable identifier of a system resource. + ResourceIdentifier + A formal computer-interpretable identifier of a system resource. - - - - Metrological - A language entity used in the metrology discipline. - Metrology is the science of measurement and its application and includes all theoretical and practical aspects of measurement, whatever the measurement uncertainty and field of application (VIM3 2.2) - Metrological - A language entity used in the metrology discipline. - Metrology is the science of measurement and its application and includes all theoretical and practical aspects of measurement, whatever the measurement uncertainty and field of application (VIM3 2.2) + + + + + + + + + + + CompositeBoson + CompositeBoson + Examples of composite particles with integer spin: +spin 0: H1 and He4 in ground state, pion +spin 1: H1 and He4 in first excited state, meson +spin 2: O15 in ground state. - - - GluonType7 - GluonType7 + + + + + LarmonFrequency + Quotient of Larmor angular frequency and 2π. + LarmonFrequency + 10-15.2 + Quotient of Larmor angular frequency and 2π. - + - + - - SpecificGasConstant - SpecificGasConstant - https://www.wikidata.org/wiki/Q94372268 - 5-26 - - - - - - Perspective - The class of causal objects that stand for world objects according to a specific representational perspective. - This class is the practical implementation of the EMMO pluralistic approach for which the only objective categorization is provided by the Universe individual and all the Quantum individuals. -Between these two extremes, there are several subjective ways to categorize real world objects, each one provide under a 'Perspective' subclass. - Perspective - The class of causal objects that stand for world objects according to a specific representational perspective. - This class is the practical implementation of the EMMO pluralistic approach for which the only objective categorization is provided by the Universe individual and all the Quantum individuals. -Between these two extremes, there are several subjective ways to categorize real world objects, each one provide under a 'Perspective' subclass. + + Frequency + Number of periods per time interval. + Frequency + http://qudt.org/vocab/quantitykind/Frequency + https://www.wikidata.org/wiki/Q11652 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-06-02 + 3-15.1 + Number of periods per time interval. + https://doi.org/10.1351/goldbook.FT07383 - + + + RedTopAntiQuark + RedTopAntiQuark + + + + + GluonType8 + GluonType8 + + + + + + SpecificInternalEnergy + Internal energy per unit mass. + SpecificInternalEnergy + https://qudt.org/vocab/quantitykind/SpecificInternalEnergy + https://www.wikidata.org/wiki/Q76357367 + 5-21.2 + Internal energy per unit mass. + + + - - - - - - - - - - - + - Density - Quantity representing the spatial distribution of mass in a continuous material. - MassConcentration - MassDensity - Density - http://qudt.org/vocab/quantitykind/Density - 4-2 - 9-10 - Mass per volume. - https://doi.org/10.1351/goldbook.D01590 + + SpecificEnergy + Energy per unit mass + SpecificEnergy + https://qudt.org/vocab/quantitykind/SpecificEnergy + https://www.wikidata.org/wiki/Q3023293 + https://dbpedia.org/page/Specific_energy + 5-21.1 + Energy per unit mass + https://en.wikipedia.org/wiki/Specific_energy - - - - Intensive - A quantity whose magnitude is independent of the size of the system. - Note that not all physical quantities can be categorised as being either intensive or extensive. For example the square root of the mass. - Intensive - A quantity whose magnitude is independent of the size of the system. - Temperature -Density -Pressure -ChemicalPotential + + + + SeparateManufacturing + A manufacturing process in which the shape of a workpiece is changed by breaking the material cohesion at the processing point and thus the material cohesion is reduced overall. + DIN 8580:2020 + Trennen + CuttingManufacturing + SeparateManufacturing + A manufacturing process in which the shape of a workpiece is changed by breaking the material cohesion at the processing point and thus the material cohesion is reduced overall. - - + + + + WorkpieceManufacturing + A manufacturing with an output that is an object with a specific function, shape, or intended use, not simply a material. + DIN 8580:2020 + ISO 15531-1:2004 +discrete manufacturing: production of discrete items. + ISO 8887-1:2017 +manufacturing: production of components + Werkstücke + DiscreteManufacturing + WorkpieceManufacturing + A manufacturing with an output that is an object with a specific function, shape, or intended use, not simply a material. + + + + - T0 L0 M-1 I+1 Θ0 N0 J0 + T0 L-1 M0 I+1 Θ0 N0 J0 - ElectricCurrentPerMassUnit - ElectricCurrentPerMassUnit + MagneticFieldStrengthUnit + MagneticFieldStrengthUnit - - - - GasAdsorptionPorosimetry - - Gas Adsorption Porosimetry is a method used for analyzing the surface area and porosity of materials. In this method, a gas, typically nitrogen or argon, is adsorbed onto the surface of the material at various pressures and temperatures. - GasAdsorptionPorosimetry - GasAdsorptionPorosimetry - Gas Adsorption Porosimetry is a method used for analyzing the surface area and porosity of materials. In this method, a gas, typically nitrogen or argon, is adsorbed onto the surface of the material at various pressures and temperatures. + + + + + ReactorTimeConstant + Duration required for the neutron fluence rate in a reactor to change by the factor e when the fluence rate is rising or falling exponentially. + ReactorTimeConstant + https://qudt.org/vocab/quantitykind/ReactorTimeConstant + https://www.wikidata.org/wiki/Q99518950 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-07-04 + 10-79 + Duration required for the neutron fluence rate in a reactor to change by the factor e when the fluence rate is rising or falling exponentially. - - - - Porosimetry - - Porosimetry + + + + Duration + Physical quantity for describing the temporal distance between events. + Duration + https://www.wikidata.org/wiki/Q2199864 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-01-13 + 3-9 + Physical quantity for describing the temporal distance between events. - - - - ElectricPolarization - At a given point within a domain of quasi-infinitesimal volume V, vector quantity equal to the electric dipole moment p of the substance contained within the domain divided by the volume V. - ElectricPolarization - https://qudt.org/vocab/quantitykind/ElectricPolarization - https://www.wikidata.org/wiki/Q1050425 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-37 - 6-7 - At a given point within a domain of quasi-infinitesimal volume V, vector quantity equal to the electric dipole moment p of the substance contained within the domain divided by the volume V. + + + Cognised + A semiotic object that is recognised by an interpreter (a cogniser) when establishing a connection between the object and an icon. + Cognised + A semiotic object that is recognised by an interpreter (a cogniser) when establishing a connection between the object and an icon. + A physical phenomenon that is connected to an equation by a scientist. - - + + - - + + + + + + - - - ElectricFluxDensity - Vector quantity obtained at a given point by adding the electric polarization P to the product of the electric field strength E and the electric constant ε0. - ElectricDisplacement - ElectricFluxDensity - https://qudt.org/vocab/quantitykind/ElectricDisplacementField - https://www.wikidata.org/wiki/Q371907 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-40 - 6-12 - Vector quantity obtained at a given point by adding the electric polarization P to the product of the electric field strength E and the electric constant ε0. + + + + + + + + + + Icon + A sign that stands for an object by resembling or imitating it, in shape, function or by sharing a similar logical structure. + If object and sign belongs to the same class, then the sign is fuctional, diagrammatic and resemblance. +For example, when a Boeing 747 is used as a sign for another Boeing 747. + In Peirce semiotics three subtypes of icon are possible: +(a) the image, which depends on a simple quality (e.g. picture) +(b) the diagram, whose internal relations, mainly dyadic or so taken, represent by analogy the relations in something (e.g. math formula, geometric flowchart) +(c) the metaphor, which represents the representative character of a sign by representing a parallelism in something else +[Wikipedia] + Model + Simulacrum + Icon + A sign that stands for an object by resembling or imitating it, in shape, function or by sharing a similar logical structure. + A picture that reproduces the aspect of a person. + An equation that reproduces the logical connection of the properties of a physical entity. - + - - - - - T-3 L-1 M+1 I0 Θ+1 N0 J0 - - - TemperaturePressurePerTimeUnit - TemperaturePressurePerTimeUnit + + + SlowingDownLength + Square root of the slowing down area. + SlowingDownLength + https://qudt.org/vocab/quantitykind/Slowing-DownLength + https://www.wikidata.org/wiki/Q98996963 + 10-73.1 + Square root of the slowing down area. - - - - - - - - - - - - - - - - - - - Item - A world entity is direct causally self-connected if any two parts that make up the whole are direct causally connected to each other. In the EMMO, topological connectivity is based on causality. -All physical objects, i.e. entities whose behaviour is explained by physics laws, are represented only by items. In other words, a physical object part is embedded in a direct causal graph that provides always a path between two of its parts. -Members of a collection lack such direct causality connection, i.e. they do not constitute a physical object. + + + + + + + + + + + Length + Extend of a spatial dimension. + Length is a non-negative additive quantity attributed to a one-dimensional object in space. + Length + http://qudt.org/vocab/quantitykind/Length + 3-1.1 + Extend of a spatial dimension. + https://doi.org/10.1351/goldbook.L03498 + -Following graph theory concepts, the quantums of an item are all connected together within a network of causal relations, forming a connected causal graph. A collection is then a set of disconnected graphs. - The class of individuals standing for direct causally self-connected world entities. - The disjoint union of Elementary, Quantum and CausalSystem classes. - Item - A world entity is direct causally self-connected if any two parts that make up the whole are direct causally connected to each other. In the EMMO, topological connectivity is based on causality. -All physical objects, i.e. entities whose behaviour is explained by physics laws, are represented only by items. In other words, a physical object part is embedded in a direct causal graph that provides always a path between two of its parts. -Members of a collection lack such direct causality connection, i.e. they do not constitute a physical object. + + + GreenUpAntiQuark + GreenUpAntiQuark + -Following graph theory concepts, the quantums of an item are all connected together within a network of causal relations, forming a connected causal graph. A collection is then a set of disconnected graphs. - The disjoint union of Elementary, Quantum and CausalSystem classes. - The class of individuals standing for direct causally self-connected world entities. + + + + + + + + + + + BurgersVector + Vector characterising a dislocation in a crystal lattice. + BurgersVector + https://qudt.org/vocab/quantitykind/BurgersVector + https://www.wikidata.org/wiki/Q623093 + 12-6 + Vector characterising a dislocation in a crystal lattice. - - - - LiquidAerosol - An aerosol composed of liquid droplets in air or another gas. - LiquidAerosol - An aerosol composed of liquid droplets in air or another gas. + + + + Displacement + vector quantity between any two points in space + Displacement + https://qudt.org/vocab/quantitykind/Displacement + https://www.wikidata.org/wiki/Q190291 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-01-29 + https://dbpedia.org/page/Displacement_(geometry) + 3-1.11 + vector quantity between any two points in space + https://en.wikipedia.org/wiki/Displacement_(geometry) - - - - - Aerosol - A colloid composed of fine solid particles or liquid droplets in air or another gas. - Aerosol - A colloid composed of fine solid particles or liquid droplets in air or another gas. + + + + + VacuumMagneticPermeability + The DBpedia and UIPAC Gold Book definitions (http://dbpedia.org/page/Vacuum_permeability, https://doi.org/10.1351/goldbook.P04504) are outdated since May 20, 2019. It is now a measured constant. + The value of magnetic permeability in a classical vacuum. + PermeabilityOfVacuum + VacuumMagneticPermeability + http://qudt.org/vocab/constant/ElectromagneticPermeabilityOfVacuum + 6-26.1 - - - - - - - - - - - - - - PhysicalParticle - A well defined physical entity, elementary or composite, usually treated as a singular unit, that is found at scales spanning from the elementary particles to molecules, as fundamental constituents of larger scale substances (as the etymology of "particle" suggests). - The scope of the physical particle definition goes from the elementary particles to molecules, as fundamental constituents of substances. - The union of hadron and lepton, or fermion and bosons. - Particle - PhysicalParticle - The union of hadron and lepton, or fermion and bosons. - A well defined physical entity, elementary or composite, usually treated as a singular unit, that is found at scales spanning from the elementary particles to molecules, as fundamental constituents of larger scale substances (as the etymology of "particle" suggests). - The scope of the physical particle definition goes from the elementary particles to molecules, as fundamental constituents of substances. + + + + + + + + + + + + Permeability + Measure for how the magnetization of material is affected by the application of an external magnetic field . + ElectromagneticPermeability + Permeability + http://qudt.org/vocab/quantitykind/ElectromagneticPermeability + 6-26.2 + https://doi.org/10.1351/goldbook.P04503 - + - - Assigner - A estimator that uses its predefined knowledge to declare a property of an object. - Assigner - A estimator that uses its predefined knowledge to declare a property of an object. - I estimate the molecular mass of the gas in my bottle as 1.00784 u because it is tagged as H. + MeasuredConstant + For a given unit system, measured constants are physical constants that are not used to define the unit system. Hence, these constants have to be measured and will therefore be associated with an uncertainty. + MeasuredConstant + For a given unit system, measured constants are physical constants that are not used to define the unit system. Hence, these constants have to be measured and will therefore be associated with an uncertainty. - - - Estimator - A characteriser that declares a property for an object without actually interact with it with the specific interaction required by the property definition (i.e. infer a property from other properties). - Estimator - A characteriser that declares a property for an object without actually interact with it with the specific interaction required by the property definition (i.e. infer a property from other properties). + + + + + + + + + + + + + + + + + + + + + + SamplePreparation + + Sample preparation processes (e.g., machining, polishing, cutting to size, etc.) before actual observation and measurement. + SamplePreparation + Sample preparation processes (e.g., machining, polishing, cutting to size, etc.) before actual observation and measurement. - - - - Arrangement - A causal object which is tessellated with only spatial direct parts. - The definition of an arrangement implies that its spatial direct parts are not gained or lost during its temporal extension (they exist from the left to the right side of the time interval), so that the cardinality of spatial direct parts in an arrangement is constant. -This does not mean that there cannot be a change in the internal structure of the arrangement direct parts. It means only that this change must not affect the existence of the direct part itself. - The use of spatial direct parthood in state definition means that an arrangement cannot overlap in space another arrangement that is direct part of the same whole. - MereologicalState - Arrangement - A causal object which is tessellated with only spatial direct parts. - e.g. the existent in my glass is declared at t = t_start as made of two direct parts: the ice and the water. It will continue to exists as state as long as the ice is completely melt at t = t_end. The new state will be completely made of water. Between t_start and t_end there is an exchange of molecules between the ice and the water, but this does not affect the existence of the two states. + + + + Sample + + Sample and Specime are often used interchangeably. However in some cases the term Specimen is used to specify a portion taken under conditions such that the sampling variability cannot be assessed (usually because the population is changing), and is assumed, for convenience, to be zero. + Portion of material selected from a larger quantity of material. The term needs to be qualified, e.g., bulk sample, representative sample, primary sample, bulked sample, test sample, etc. The term 'sample' implies the existence of a sampling error, i.e., the results obtained on the portions taken are only estimates of the concentration of a constituent or the quantity of a property present in the parent material. If there is no or negligible sampling error, the portion removed is a test portion, aliquot, or specimen. + Specimen + Sample + Portion of material selected from a larger quantity of material. The term needs to be qualified, e.g., bulk sample, representative sample, primary sample, bulked sample, test sample, etc. The term 'sample' implies the existence of a sampling error, i.e., the results obtained on the portions taken are only estimates of the concentration of a constituent or the quantity of a property present in the parent material. If there is no or negligible sampling error, the portion removed is a test portion, aliquot, or specimen. + Sample and Specime are often used interchangeably. However in some cases the term Specimen is used to specify a portion taken under conditions such that the sampling variability cannot be assessed (usually because the population is changing), and is assumed, for convenience, to be zero. + -If we partition the existent in my glass as ice surrounded by several molecules (we do not use the object water as direct part) then the appearance of a molecule coming from the ice will cause a state to end and another state to begin. + + + + Sequence + A tessellation of temporal slices. + Sequence + A tessellation of temporal slices. - + - + - SpatialTiling - A well formed tessellation with tiles that all spatial. - SpatialTiling - A well formed tessellation with tiles that all spatial. + TemporalTiling + A well formed tessellation with tiles that are all temporal. + TemporalTiling + A well formed tessellation with tiles that are all temporal. - + - - + - - T-4 L+2 M0 I0 Θ0 N0 J0 + + + + + + - - AreaPerQuarticTimeUnit - AreaPerQuarticTimeUnit + + + NumberOfElements + Number of direct parts of a Reductionistic. + Using direct parthood EMMO creates a well-defined broadcasting between granularity levels. This also make it possible to count the direct parts of each granularity level. + NumberOfElements + Number of direct parts of a Reductionistic. - - - - ArchetypeManufacturing - A manufacturing in which the product is a solid body with a well defined geometrical shape made from shapeless original material parts, whose cohesion is created during the process. - DIN 8580:2020 - Urformen - PrimitiveForming - ArchetypeManufacturing - A manufacturing in which the product is a solid body with a well defined geometrical shape made from shapeless original material parts, whose cohesion is created during the process. - + + + + PureNumberQuantity + A pure number, typically the number of something. + According to the SI brochure counting does not automatically qualify a quantity as an amount of substance. - - - - WorkpieceManufacturing - A manufacturing with an output that is an object with a specific function, shape, or intended use, not simply a material. - DIN 8580:2020 - ISO 15531-1:2004 -discrete manufacturing: production of discrete items. - ISO 8887-1:2017 -manufacturing: production of components - Werkstücke - DiscreteManufacturing - WorkpieceManufacturing - A manufacturing with an output that is an object with a specific function, shape, or intended use, not simply a material. - +This quantity is used only to describe the outcome of a counting process, without regard of the type of entities. - - - - ElectromagneticQuantity - Quantities categorised according to ISO 80000-6. - ElectromagneticQuantity - Quantities categorised according to ISO 80000-6. +There are also some quantities that cannot be described in terms of the seven base quantities of the SI, but have the nature of a count. Examples are a number of molecules, a number of cellular or biomolecular entities (for example copies of a particular nucleic acid sequence), or degeneracy in quantum mechanics. Counting quantities are also quantities with the associated unit one. + PureNumberQuantity + A pure number, typically the number of something. + 1, +i, +π, +the number of protons in the nucleus of an atom - + - + - - - Permittivity - Measure for how the polarization of a material is affected by the application of an external electric field. - Permittivity - http://qudt.org/vocab/quantitykind/Permittivity - 6-14.1 - 6-14.2 - https://doi.org/10.1351/goldbook.P04507 + Stress + Force per unit oriented surface area . + Measure of the internal forces that neighboring particles of a continuous material exert on each other. + Stress + http://qudt.org/vocab/quantitykind/Stress + 4-15 - - - - DataFiltering - Data filtering is the process of examining a dataset to exclude, rearrange, or apportion data according to certain criteria. - DataFiltering - Data filtering is the process of examining a dataset to exclude, rearrange, or apportion data according to certain criteria. + + + + + + + T-3 L+1 M+1 I0 Θ0 N0 J0 + + + MassLengthPerCubicTimeUnit + MassLengthPerCubicTimeUnit - - - - DataPreparation - Data preparation is the process of manipulating (or pre-processing) data (which may come from disparate data sources) to improve their quality or reduce bias in subsequent analysis. - DataPreparation - Data preparation is the process of manipulating (or pre-processing) data (which may come from disparate data sources) to improve their quality or reduce bias in subsequent analysis. + + + + QuantumDecay + A quantum decay is a fundamental causal system that is expressed as a complete bipartite directed graph K(1,n). + QuantumDecay + A quantum decay is a fundamental causal system that is expressed as a complete bipartite directed graph K(1,n). - - - - - GFactor - Relation between observed magnetic moment of a particle and the related unit of magnetic moment. - GFactor - https://www.wikidata.org/wiki/Q1951266 - Relation between observed magnetic moment of a particle and the related unit of magnetic moment. + + + CausalExpansion + A causal expansion is a fundamental causal system that is expressed as a complete bipartite directed graph K(m,n), when m<n. + CausalExpansion + A causal expansion is a fundamental causal system that is expressed as a complete bipartite directed graph K(m,n), when m<n. - + - - - - - - - - Time - One-dimensional subspace of space-time, which is locally orthogonal to space. - The indefinite continued progress of existence and events that occur in apparently irreversible succession from the past through the present to the future. - Time can be seen as the duration of an event or, more operationally, as "what clocks read". - Time - http://qudt.org/vocab/quantitykind/Time - One-dimensional subspace of space-time, which is locally orthogonal to space. - 3-7 - The indefinite continued progress of existence and events that occur in apparently irreversible succession from the past through the present to the future. - https://doi.org/10.1351/goldbook.T06375 + + + LondonPenetrationDepth + Distance a magnetic field penetrates the plane surface of a semi-finite superconductor. + LondonPenetrationDepth + https://qudt.org/vocab/quantitykind/LondonPenetrationDepth + https://www.wikidata.org/wiki/Q3277853 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=815-10-33 + 12-38.1 + Distance a magnetic field penetrates the plane surface of a semi-finite superconductor. - + - MicrowaveSintering - MicrowaveSintering + ElectricCurrentAssistedSintering + ElectricCurrentAssistedSintering @@ -3516,1141 +3465,1488 @@ sintering: process of heating a powder metal compact to increase density and/or Because the sintering temperature doesn’t reach the materials’ melting point, it is often used for materials with high melting points, such as molybdenum and tungsten. - - - - CompressionTesting - - Compression tests characterize material and product strength and stiffness under applied crushing loads. These tests are typically conducted by applying compressive pressure to a test specimen using platens or specialized fixtures with a testing machine that produces compressive loads. - CompressionTesting - Compression tests characterize material and product strength and stiffness under applied crushing loads. These tests are typically conducted by applying compressive pressure to a test specimen using platens or specialized fixtures with a testing machine that produces compressive loads. + + + + + + + T-1 L-1 M0 I0 Θ0 N0 J0 + + + PerLengthTimeUnit + PerLengthTimeUnit - - - - MechanicalTesting - - Mechanical testing covers a wide range of tests, which can be divided broadly into two types: -1. those that aim to determine a material's mechanical properties, independent of geometry. -2. those that determine the response of a structure to a given action, e.g. testing of composite beams, aircraft structures to destruction, etc. - MechanicalTesting - Mechanical testing covers a wide range of tests, which can be divided broadly into two types: -1. those that aim to determine a material's mechanical properties, independent of geometry. -2. those that determine the response of a structure to a given action, e.g. testing of composite beams, aircraft structures to destruction, etc. - https://en.wikipedia.org/wiki/Mechanical_testing + + + + + + + + + + + + + + CausalStructure + A causal structure expresses itself in time and space thanks to the underlying causality relations between its constituent quantum entities. It must at least provide two temporal parts. +The unity criterion beyond the definition of a causal structure (the most general concept of structure) is the existence of an undirected causal path between each of its parts. + A self-connected composition of more than one quantum entities. + The most fundamental unity criterion for the definition of an structure is that: +- is made of at least two quantums (a structure is not a simple entity) +- all quantum parts form a causally connected graph + The union of CausalPath and CausalSystem classes. + CausalObject + CausalStructure + The most fundamental unity criterion for the definition of an structure is that: +- is made of at least two quantums (a structure is not a simple entity) +- all quantum parts form a causally connected graph + The union of CausalPath and CausalSystem classes. + A self-connected composition of more than one quantum entities. + A causal structure expresses itself in time and space thanks to the underlying causality relations between its constituent quantum entities. It must at least provide two temporal parts. +The unity criterion beyond the definition of a causal structure (the most general concept of structure) is the existence of an undirected causal path between each of its parts. - - - - - Tool - An object that enables or facilitate an agent in the execution of a process that modifies the surrounding environment. - Tool - An object that enables or facilitate an agent in the execution of a process that modifies the surrounding environment. + + + + + + + T0 L-2 M0 I+1 Θ0 N0 J0 + + + ElectricCurrentDensityUnit + ElectricCurrentDensityUnit - - - - - Expression - A well-formed finite combination of mathematical symbols according to some specific rules. - Expression - A well-formed finite combination of mathematical symbols according to some specific rules. + + + Person + Person - - - - Mathematical - A mathematical object in this branch is not representing a concept but an actual graphical object built using mathematcal symbols arranged in some way, according to math conventions. - The class of general mathematical symbolic objects respecting mathematical syntactic rules. - Mathematical - The class of general mathematical symbolic objects respecting mathematical syntactic rules. + + + + SpecificGibbsEnergy + Gibbs energy per unit mass. + SpecificGibbsEnergy + https://qudt.org/vocab/quantitykind/SpecificGibbsEnergy + https://www.wikidata.org/wiki/Q76360636 + 5-21.5 + Gibbs energy per unit mass. - - - - - - - - - - SymbolicConstruct - A symbolic entity made of other symbolic entities according to a specific spatial configuration. - This class collects individuals that represents arrangements of strings, or other symbolic compositions, without any particular predifined arrangement schema. - SymbolicConstruct - A symbolic entity made of other symbolic entities according to a specific spatial configuration. - This class collects individuals that represents arrangements of strings, or other symbolic compositions, without any particular predifined arrangement schema. + + + + DifferentialRefractiveIndex + + DifferentialRefractiveIndex - - + + + + OpticalTesting + + OpticalTesting + + + + + + + LatticePlaneSpacing + distance between successive lattice planes + LatticePlaneSpacing + https://qudt.org/vocab/quantitykind/LatticePlaneSpacing + https://www.wikidata.org/wiki/Q105488046 + 12-3 + distance between successive lattice planes + + + + + + Distance + Distance is the norm of Displacement. + Shortest path length between two points in a metric space. + Distance + https://qudt.org/vocab/quantitykind/Distance + https://www.wikidata.org/wiki/Q126017 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=102-03-24 + https://dbpedia.org/page/Distance + 3-1.8 + Shortest path length between two points in a metric space. + https://en.wikipedia.org/wiki/Distance + + + + - - - 1 + + - - IRI - An Internationalized Resource Identifier (IRI) is a compact sequence of characters that identifies an abstract or physical resource. It is similar to URI, but greatly extends the allowed character set from ASCII to the Universal Character Set. - IRIs are commonly used as identifiers for ontological entities, although the extended unicode character set is rarely used. - IRI - An Internationalized Resource Identifier (IRI) is a compact sequence of characters that identifies an abstract or physical resource. It is similar to URI, but greatly extends the allowed character set from ASCII to the Universal Character Set. - https://en.wiktionary.org/wiki/Ῥόδος - IRIs are commonly used as identifiers for ontological entities, although the extended unicode character set is rarely used. - https://en.wikipedia.org/wiki/Internationalized_Resource_Identifier + + + LinearElectricCurrentDensity + Surface density of electric charge multiplied by velocity + LinearElectricCurrentDensity + https://qudt.org/vocab/quantitykind/LinearElectricCurrentDensity + https://www.wikidata.org/wiki/Q2356741 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-12 + 6-9 + Surface density of electric charge multiplied by velocity - - - - Gas - Gas is a compressible fluid, a state of matter that has no fixed shape and no fixed volume. - Gas - Gas is a compressible fluid, a state of matter that has no fixed shape and no fixed volume. + + + + + + + + + + + + Reductionistic + A class devoted to categorize causal objects by specifying their granularity levels. + A granularity level is specified by a tiling decomposition of the whole y. A tiling is identified as a set of items {x1, x2, ... xn} called tiles that: + - are proper parts of y + - covers the entire whole (y = x1 +x2 + ... + xn) + - do not overlap + - are part of one, and one only, whole (inverse functional) + Reductionistic + A class devoted to categorize causal objects by specifying their granularity levels. + A granularity level is specified by a tiling decomposition of the whole y. A tiling is identified as a set of items {x1, x2, ... xn} called tiles that: + - are proper parts of y + - covers the entire whole (y = x1 +x2 + ... + xn) + - do not overlap + - are part of one, and one only, whole (inverse functional) + Direct parthood is the antitransitive parthood relation used to build the class hierarchy (and the granularity hierarchy) for this perspective. - - - - - CouplingFactor - InductiveCouplingFactor - CouplingFactor - https://www.wikidata.org/wiki/Q78101715 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-41 - 6-42.1 + + + + Perspective + The class of causal objects that stand for world objects according to a specific representational perspective. + This class is the practical implementation of the EMMO pluralistic approach for which the only objective categorization is provided by the Universe individual and all the Quantum individuals. +Between these two extremes, there are several subjective ways to categorize real world objects, each one provide under a 'Perspective' subclass. + Perspective + The class of causal objects that stand for world objects according to a specific representational perspective. + This class is the practical implementation of the EMMO pluralistic approach for which the only objective categorization is provided by the Universe individual and all the Quantum individuals. +Between these two extremes, there are several subjective ways to categorize real world objects, each one provide under a 'Perspective' subclass. - - - Process - A process can be defined only according to an entity type. The minimum process is an entity made of two entities of the same type that are temporally related. - A whole that is identified according to a criteria based on its temporal evolution that is satisfied throughout its time extension. - Following the common definition of process, the reader may think that every whole should be a process, since every 4D object always has a time dimension. However, in the EMMO we restrict the meaning of the word process to items whose evolution in time have a particular meaning for the ontologist (i.e. every 4D object unfolds in time, but not every 4D time unfolding may be of interest for the ontologist and categorized as a process). - -For this reason, the definition of every specific process subclass requires the introduction of a primitive concept. - Occurrent - Perdurant - Process - A whole that is identified according to a criteria based on its temporal evolution that is satisfied throughout its time extension. - A process can be defined only according to an entity type. The minimum process is an entity made of two entities of the same type that are temporally related. + + + + + MigrationLength + Square root of the migration area, M^2. + MigrationLength + https://qudt.org/vocab/quantitykind/MigrationLength + https://www.wikidata.org/wiki/Q98998318 + 10-73.3 + Square root of the migration area, M^2. - - - - PhotochemicalProcesses - PhotochemicalProcesses + + + + Dust + A suspension of fine particles in the atmosphere. + Dust + A suspension of fine particles in the atmosphere. - - - - - MaterialTreatment - esce workpiece - Has shaped bodies as input and output. - The processing of a material aimed to transform its structure by means of any type of treatment, without involving relevant synthesis phenomena. - DIN 8580:2020 - Stoffeigenschaft ändern - WorkPieceTreatment - MaterialTreatment - The processing of a material aimed to transform its structure by means of any type of treatment, without involving relevant synthesis phenomena. - Manufacturing by changing the properties of the material of which a workpiece is made, which is done, among other things, by changes in the submicroscopic or atomic range, e.g. by diffusion of atoms, generation and movement of dislocations in the atomic lattice or chemical reactions, and where unavoidable changes in shape are not part of the essence of these processes. - Has shaped bodies as input and output. + + + + GasSolidSuspension + A coarse dispersion of solid in a gas continuum phase. + GasSolidSuspension + A coarse dispersion of solid in a gas continuum phase. + Dust, sand storm. - - - - CharacterisationHardware - Whatever hardware is used during the characterisation process. - CharacterisationHardware - Whatever hardware is used during the characterisation process. + + + + Shape4x3Matrix + A real matrix with shape 4x3. + Shape4x3Matrix + A real matrix with shape 4x3. - - - - Device - An object which is instrumental for reaching a particular purpose through its characteristic functioning process, with particular reference to mechanical or electronic equipment. - Equipment - Machine - Device - An object which is instrumental for reaching a particular purpose through its characteristic functioning process, with particular reference to mechanical or electronic equipment. + + + + + + + + + + Matrix + 2-dimensional array who's spatial direct parts are vectors. + 2DArray + Matrix + 2-dimensional array who's spatial direct parts are vectors. - + - - - ManufacturedProduct - An object that has been designed and manufactured for a particular purpose. - Artifact - Engineered - TangibleProduct - ManufacturedProduct - An object that has been designed and manufactured for a particular purpose. - Car, tire, composite material. + + MergingManufacturing + AddingManufacturing + MergingManufacturing - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - AntiQuark - AntiQuark + + + + + NuclidicMass + Rest mass of a nuclide X in the ground state. + NuclidicMass + https://www.wikidata.org/wiki/Q97010809 + 10-4.2 + Rest mass of a nuclide X in the ground state. + https://doi.org/10.1351/goldbook.N04258 - - - - ConventionalProperty - A property that is associated to an object by convention, or assumption. - A quantitative property attributed by agreement to a quantity for a given purpose. - ConventionalProperty - A quantitative property attributed by agreement to a quantity for a given purpose. - The thermal conductivity of a copper sample in my laboratory can be assumed to be the conductivity that appears in the vendor specification. This value has been obtained by measurement of a sample which is not the one I have in my laboratory. This conductivity value is then a conventional quantitiative property assigned to my sample through a semiotic process in which no actual measurement is done by my laboratory. + + + + + RestMass + For particle X, mass of that particle at rest in an inertial frame. + InvariantMass + ProperMass + RestMass + https://qudt.org/vocab/quantitykind/RestMass + https://www.wikidata.org/wiki/Q96941619 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-03 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-04-16 + https://dbpedia.org/page/Mass_in_special_relativity + 10-2 + For particle X, mass of that particle at rest in an inertial frame. + https://en.wikipedia.org/wiki/Invariant_mass + -If I don't believe the vendor, then I can measure the actual thermal conductivity. I then perform a measurement process that semiotically assign another value for the conductivity, which is a measured property, since is part of a measurement process. + + + + Voltage + Correspond to the work needed per unit of charge to move a test charge between two points in a static electric field. + The difference in electric potential between two points. + ElectricPotentialDifference + ElectricTension + Voltage + http://qudt.org/vocab/quantitykind/Voltage + 6-11.3 + The difference in electric potential between two points. + https://doi.org/10.1351/goldbook.A00424 + https://doi.org/10.1351/goldbook.V06635 + -Then I have two different physical quantities that are properties thanks to two different semiotic processes. + + + + + + + + + + + + ElectricPotential + The electric potential is not unique, since any constant scalar +field quantity can be added to it without changing its gradient. + Energy required to move a unit charge through an electric field from a reference point. + ElectroStaticPotential + ElectricPotential + http://qudt.org/vocab/quantitykind/ElectricPotential + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-25 + https://dbpedia.org/page/Electric_potential + 6-11.1 + Energy required to move a unit charge through an electric field from a reference point. + https://en.wikipedia.org/wiki/Electric_potential + https://doi.org/10.1351/goldbook.E01935 - - - - - - - - - - - StrictFundamental - The class of individuals that satisfy a whole defining criteria (i.e. belongs to a subclass of whole) and have no proper parts that satisfy that same criteria (no parts that are of the same type of the whole). - StrictFundamental - The class of individuals that satisfy a whole defining criteria (i.e. belongs to a subclass of whole) and have no proper parts that satisfy that same criteria (no parts that are of the same type of the whole). + + + OrdinalQuantity + "Ordinal quantities, such as Rockwell C hardness, are usually not considered to be part of a system of quantities because they are related to other quantities through empirical relations only." +International vocabulary of metrology (VIM) + "Quantity, defined by a conventional measurement procedure, for which a total ordering relation can be established, according to magnitude, with other quantities of the same kind, but for which no algebraic operations among those quantities exist" +International vocabulary of metrology (VIM) + OrdinalQuantity + "Quantity, defined by a conventional measurement procedure, for which a total ordering relation can be established, according to magnitude, with other quantities of the same kind, but for which no algebraic operations among those quantities exist" +International vocabulary of metrology (VIM) + Hardness +Resilience + ordinal quantity - - - - Soldering - Method of joining metallic materials with the aid of a molten filler metal (solder), optionally with the use of flow agents - Löten - Soldering + + + + + + + + + + + + + + + ParticleConcentration + ParticleConcentration + https://www.wikidata.org/wiki/Q39078574 + 9-9.1 - - - - ThermochemicalTreatment - ThermochemicalTreatment + + + + Concentration + the abundance of a constituent divided by the total volume of a mixture. + Concentration + https://qudt.org/vocab/quantitykind/Concentration + https://www.wikidata.org/wiki/Q3686031 + https://dbpedia.org/page/Concentration + the abundance of a constituent divided by the total volume of a mixture. + https://en.wikipedia.org/wiki/Concentration + https://goldbook.iupac.org/terms/view/C01222 - + - + - - ModulusOfCompression - Measure of how resistant to compressibility a substance is. - BulkModulus - ModulusOfCompression - https://qudt.org/vocab/quantitykind/BulkModulus - https://www.wikidata.org/wiki/Q900371 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-69 - 4-19.3 - Measure of how resistant to compressibility a substance is. + + + MolecularConcentration + Number of molecules of a substance in a mixture per volume. + MolecularConcentration + https://qudt.org/vocab/quantitykind/MolecularConcentration + https://www.wikidata.org/wiki/Q88865973 + 9-9.2 + Number of molecules of a substance in a mixture per volume. - + - - - DewPointTemperature - The corresponding Celsius temperature is denoted td and is also called dew point. - Thermodynamic temperature at which vapour in air reaches saturation. - DewPointTemperature - https://www.wikidata.org/wiki/Q178828 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-67 - 5-36 - Thermodynamic temperature at which vapour in air reaches saturation. - https://doi.org/10.1351/goldbook.D01652 + + VolumetricNumberDensity + Count per volume. + VolumetricNumberDensity + Count per volume. - + - + - - - ThermodynamicTemperature - Thermodynamic temperature is the absolute measure of temperature. It is defined by the third law of thermodynamics in which the theoretically lowest temperature is the null or zero point. - ThermodynamicTemperature - http://qudt.org/vocab/quantitykind/ThermodynamicTemperature - 5-1 - Thermodynamic temperature is the absolute measure of temperature. It is defined by the third law of thermodynamics in which the theoretically lowest temperature is the null or zero point. - https://doi.org/10.1351/goldbook.T06321 + + + ParticleNumberDensity + Mean number of particles per volume. + ParticleNumberDensity + https://qudt.org/vocab/quantitykind/ParticleNumberDensity + https://www.wikidata.org/wiki/Q98601569 + 10-62.1 + Mean number of particles per volume. + https://doi.org/10.1351/goldbook.N04262 - - - - - - + + + Deduced + A semantic object that is connected to an index sign by an interpreter (a deducer) by causal cogiguity. + Deduced + A semantic object that is connected to an index sign by an interpreter (a deducer) by causal cogiguity. + + + + + + + - - + - - - - PhysicalObject - A CausalSystem whose quantum parts are all bonded to the rest of the system. - It is natural to define entities made or more than one smaller parts according to some unity criteria. One of the most general one applicable to causal systems is to ask that all the quantum parts of the system are bonded to the rest. -In other words, causal convexity excludes all quantums that leave the system (no more interacting), or that are not yet part of it (not yet interacting). -So, a photon leaving a body is not part of the body as convex system, while a photon the is carrier of electromagnetic interaction between two molecular parts of the body, is part of the convex body. - PhysicalObject - A CausalSystem whose quantum parts are all bonded to the rest of the system. - It is natural to define entities made or more than one smaller parts according to some unity criteria. One of the most general one applicable to causal systems is to ask that all the quantum parts of the system are bonded to the rest. -In other words, causal convexity excludes all quantums that leave the system (no more interacting), or that are not yet part of it (not yet interacting). -So, a photon leaving a body is not part of the body as convex system, while a photon the is carrier of electromagnetic interaction between two molecular parts of the body, is part of the convex body. + + + + + Index + A 'Sign' that stands for an 'Object' due to causal continguity. + Signal + Index + A 'Sign' that stands for an 'Object' due to causal continguity. + Smoke stands for a combustion process (a fire). +My facial expression stands for my emotional status. - - - - NormalPulseVoltammetry - - Normal pulse polarography is NPV in which a dropping mercury electrode is used as the working electrode. A pulse is applied just before the mechanically enforced end of the drop. The pulse width is usually 10 to 20 % of the drop time. The drop dislodgment is synchro- nized with current sampling, which is carried out just before the end of the pulse, as in NPV. - Sigmoidal wave-shaped voltammograms are obtained. - The current is sampled at the end of the pulse and then plotted versus the potential of the pulse. - The current is sampled just before the end of the pulse, when the charging current is greatly diminished. In this way, the ratio of faradaic current to charging current is enhanced and the negative influence of charging current is partially eliminated. Due to the improved signal (faradaic current) to noise (charging current) ratio, the limit of detec- tion is lowered. - The sensitivity of NPV is not affected by the reversibility of the electrode reaction of the analyte. - voltammetry in which potential pulses of amplitude increasing by a constant increment and with a pulse width of 2 to 200 ms are superimposed on a constant initial potential - NPV - NormalPulseVoltammetry - voltammetry in which potential pulses of amplitude increasing by a constant increment and with a pulse width of 2 to 200 ms are superimposed on a constant initial potential - https://doi.org/10.1515/pac-2018-0109 + + + + + MaterialTreatment + esce workpiece + Has shaped bodies as input and output. + The processing of a material aimed to transform its structure by means of any type of treatment, without involving relevant synthesis phenomena. + DIN 8580:2020 + Stoffeigenschaft ändern + WorkPieceTreatment + MaterialTreatment + The processing of a material aimed to transform its structure by means of any type of treatment, without involving relevant synthesis phenomena. + Manufacturing by changing the properties of the material of which a workpiece is made, which is done, among other things, by changes in the submicroscopic or atomic range, e.g. by diffusion of atoms, generation and movement of dislocations in the atomic lattice or chemical reactions, and where unavoidable changes in shape are not part of the essence of these processes. + Has shaped bodies as input and output. - - - - Voltammetry - - The current vs. potential (I-E) curve is called a voltammogram. - Voltammetry is an analytical technique based on the measure of the current flowing through an electrode dipped in a solution containing electro-active compounds, while a potential scanning is imposed upon it. - Voltammetry - https://www.wikidata.org/wiki/Q904093 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-04-11 - Voltammetry is an analytical technique based on the measure of the current flowing through an electrode dipped in a solution containing electro-active compounds, while a potential scanning is imposed upon it. - https://en.wikipedia.org/wiki/Voltammetry - https://doi.org/10.1515/pac-2018-0109 + + + + MaterialsProcessing + A manufacturing process aimed to modify the precursor objects through a physical process (involving other materials, energy, manipulation) to change its material properties. + A material process requires the output to be classified as an individual of a material subclass. + ContinuumManufacturing + MaterialsProcessing + A manufacturing process aimed to modify the precursor objects through a physical process (involving other materials, energy, manipulation) to change its material properties. + Synthesis of materials, quenching, the preparation of a cake, tempering of a steel beam. + A material process requires the output to be classified as an individual of a material subclass. - - - - AmountFractionUnit - Unit for quantities of dimension one that are the fraction of two amount of substance. - AmountFractionUnit - Unit for quantities of dimension one that are the fraction of two amount of substance. - Unit for amount fraction. + + + + + + + + + + + + + + + + + + + + + + Manufacturing + Deals with entities that have a defined shape. + The process of transforming precursor objects (e.g. raw materials) into a product by the use of manual labor, machinery or chemical/biological processes. + DIN 8580:2020 + ISO 15531-1:2004 +manufacturing: function or act of converting or transforming material from raw material or semi-finished state to a state of further completion + ISO 18435-1:2009 +manufacturing process: set of processes in manufacturing involving a flow and/or transformation of material, information, energy, control, or any other element in a manufacturing area + Manufacturing + The process of transforming precursor objects (e.g. raw materials) into a product by the use of manual labor, machinery or chemical/biological processes. + Deals with entities that have a defined shape. + https://de.wikipedia.org/wiki/Fertigungsverfahren - - - - FractionUnit - Quantities that are ratios of quantities of the same kind (for example length ratios and amount fractions) have the option of being expressed with units (m/m, mol/mol to aid the understanding of the quantity being expressed and also allow the use of SI prefixes, if this -is desirable (μm/m, nmol/mol). --- SI Brochure - Unit for fractions of quantities of the same kind, to aid the understanding of the quantity being expressed. - RatioUnit - FractionUnit - Unit for fractions of quantities of the same kind, to aid the understanding of the quantity being expressed. + + + + + + + T0 L-1 M0 I0 Θ-1 N0 J0 + + + PerLengthTemperatureUnit + PerLengthTemperatureUnit - - - AntiMuon - AntiMuon + + + + CharacterisationEnvironmentProperty + + CharacterisationEnvironmentProperty - + - - Variable - A variable is a symbolic object that stands for any other mathematical object, such as number, a vector, a matrix, a function, the argument of a function, a set, an element of a set. - Variable - A variable is a symbolic object that stands for any other mathematical object, such as number, a vector, a matrix, a function, the argument of a function, a set, an element of a set. - x -k + + + + + + + + + + + Property + A coded that makes use of an atomic symbol with respect to the code used to refer to the interaction. + A property is atomic in the sense that is aimed to deliver one and one only aspect of the object according to one code, such as the color with one sign (e.g., black) or a quantitiative property (e.g., 1.4 kg). + Property + A coded that makes use of an atomic symbol with respect to the code used to refer to the interaction. + Hardness is a subclass of properties. +Vickers hardness is a subclass of hardness that involves the procedures and instruments defined by the standard hardness test. + The name "red" which is atomic in the code made of the list of colors. + A property is atomic in the sense that is aimed to deliver one and one only aspect of the object according to one code, such as the color with one sign (e.g., black) or a quantitiative property (e.g., 1.4 kg). - + - + + - - + + T0 L-2 M0 I0 Θ0 N0 J+1 - - - PoyntingVector - Electric field strength multiplied by magnetic field strength. - PoyntingVector - https://qudt.org/vocab/quantitykind/PoyntingVector - https://www.wikidata.org/wiki/Q504186 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-66 - 6-34 - Electric field strength multiplied by magnetic field strength. + + LuminanceUnit + LuminanceUnit - + + + + + FermiEnergy + in a metal, highest occupied energy level at zero thermodynamic temperature, where energy level means the energy of an electron in the interior of a substance + FermiEnergy + https://qudt.org/vocab/quantitykind/FermiEnergy + https://www.wikidata.org/wiki/Q431335 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-06-18 + 12-27.1 + in a metal, highest occupied energy level at zero thermodynamic temperature, where energy level means the energy of an electron in the interior of a substance + https://doi.org/10.1351/goldbook.F02340 + + + - - ACVoltammetry + + MeasurementParameter - The resulting alternating current is plotted versus imposed DC potential. The obtained AC voltammogram is peak-shaped. - voltammetry in which a sinusoidal alternating potential of small amplitude (10 to 50 mV) of constant frequency (10 Hz to 100 kHz) is superimposed on a slowly and linearly varying potential ramp - ACV - ACVoltammetry - https://www.wikidata.org/wiki/Q120895154 - voltammetry in which a sinusoidal alternating potential of small amplitude (10 to 50 mV) of constant frequency (10 Hz to 100 kHz) is superimposed on a slowly and linearly varying potential ramp - https://doi.org/10.1515/pac-2018-0109 + Describes the main input parameters that are needed to acquire the signal + MeasurementParameter + Describes the main input parameters that are needed to acquire the signal - - - - - NucleonNumber - number of nucleons in an atomic nucleus - MassNumber - NucleonNumber - https://qudt.org/vocab/quantitykind/NucleonNumber - https://www.wikidata.org/wiki/Q101395 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-05-32 - https://dbpedia.org/page/Mass_number - 10-1.3 - number of nucleons in an atomic nucleus - https://en.wikipedia.org/wiki/Mass_number - https://doi.org/10.1351/goldbook.M03726 + + + + Parameter + A variable whose value is assumed to be known independently from the equation, but whose value is not explicitated in the equation. + Parameter + Viscosity in the Navier-Stokes equation - - - - PureNumberQuantity - A pure number, typically the number of something. - According to the SI brochure counting does not automatically qualify a quantity as an amount of substance. - -This quantity is used only to describe the outcome of a counting process, without regard of the type of entities. - -There are also some quantities that cannot be described in terms of the seven base quantities of the SI, but have the nature of a count. Examples are a number of molecules, a number of cellular or biomolecular entities (for example copies of a particular nucleic acid sequence), or degeneracy in quantum mechanics. Counting quantities are also quantities with the associated unit one. - PureNumberQuantity - A pure number, typically the number of something. - 1, -i, -π, -the number of protons in the nucleus of an atom + + + PhysicallyNonInteracting + A causal multipath system is a system made of causal paths that are not interacting between each others, or possibly merge and fork. + A physically unbounded system is a combination of decays and/or annihilations, without any space-like interaction between elementary particles. + PhysicallyNonInteracting + A causal multipath system is a system made of causal paths that are not interacting between each others, or possibly merge and fork. + A physically unbounded system is a combination of decays and/or annihilations, without any space-like interaction between elementary particles. - - - - SampleInspection - - Analysis of the sample in order to determine information that are relevant for the characterisation method. - SampleInspection - Analysis of the sample in order to determine information that are relevant for the characterisation method. - In the Nanoindentation method the Scanning Electron Microscope to determine the indentation area. + + + + + + + + + + + NuclearMagneton + Absolute value of the magnetic moment of a nucleus. + NuclearMagneton + https://www.wikidata.org/wiki/Q1166093 + 10-9.3 + Absolute value of the magnetic moment of a nucleus. + https://doi.org/10.1351/goldbook.N04236 - + - - SampleInspectionParameter - - Parameter used for the sample inspection process - SampleInspectionParameter - Parameter used for the sample inspection process + + DataPreparation + Data preparation is the process of manipulating (or pre-processing) data (which may come from disparate data sources) to improve their quality or reduce bias in subsequent analysis. + DataPreparation + Data preparation is the process of manipulating (or pre-processing) data (which may come from disparate data sources) to improve their quality or reduce bias in subsequent analysis. - - - - - - - - - - - - Redundant - A whole possessing some proper parts of its same type. - NonMaximal - Redundant - A whole possessing some proper parts of its same type. - An object A which is classified as water-fluid possesses a proper part B which is water itself if the lenght scale of the B is larger than the water intermolecular distance keeping it in the continuum range. In this sense, A is redundant. + + + + + MassFractionOfWater + Quantity of dimension 1 equal to u/(1 + u), where u is mass ratio of water to dry matter. + MassFractionOfWater + https://qudt.org/vocab/quantitykind/MassFractionOfWater + https://www.wikidata.org/wiki/Q76379025 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-63 + 5-31 + Quantity of dimension 1 equal to u/(1 + u), where u is mass ratio of water to dry matter. + -If A is a water-fluid so small that its every proper part is no more a continuum object (i.e. no more a fluid), then A is fundamental. + + + + + MassFraction + Mass of a constituent divided by the total mass of all constituents in the mixture. + MassFraction + http://qudt.org/vocab/quantitykind/MassFraction + 9-11 + https://doi.org/10.1351/goldbook.M03722 - - - GreenUpAntiQuark - GreenUpAntiQuark + + + + ThermodynamicalQuantity + Quantities categorised according to ISO 80000-5. + ThermodynamicalQuantity + Quantities categorised according to ISO 80000-5. - - + + - T-1 L+2 M+1 I0 Θ0 N0 J0 + T-2 L+2 M0 I0 Θ0 N0 J0 - AngularMomentumUnit - AngularMomentumUnit - - - - - - - MeanFreePath - The mean free path may thus be specified either for all interactions, i.e. total mean free path, or for particular types of interaction such as scattering, capture, or ionization. - in a given medium, average distance that particles of a specified type travel between successive interactions of a specified type. - MeanFreePath - https://qudt.org/vocab/quantitykind/MeanFreePath - https://www.wikidata.org/wiki/Q756307 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-06-37 - 9-38 - in a given medium, average distance that particles of a specified type travel between successive interactions of a specified type. - https://doi.org/10.1351/goldbook.M03778 + AbsorbedDoseUnit + AbsorbedDoseUnit - - - - PhysioChemicalQuantity - Quantities categorised according to ISO 80000-9. - PhysioChemicalQuantity - Quantities categorised according to ISO 80000-9. + + + + ReactiveMaterial + A material that takes active part in a chemical reaction. + ReactiveMaterial + A material that takes active part in a chemical reaction. - - - - PathLength - Length of a rectifiable curve between two of its points. - ArcLength - PathLength - https://www.wikidata.org/wiki/Q7144654 - https://dbpedia.org/page/Arc_length - 3-1.7 - Length of a rectifiable curve between two of its points. - https://en.wikipedia.org/wiki/Arc_length + + + + ChemicallyDefinedMaterial + ChemicallyDefinedMaterial - + - - - - - T+1 L+2 M0 I+1 Θ0 N0 J0 - - - ElectricChargeAreaUnit - ElectricChargeAreaUnit + + Intensive + A quantity whose magnitude is independent of the size of the system. + Note that not all physical quantities can be categorised as being either intensive or extensive. For example the square root of the mass. + Intensive + A quantity whose magnitude is independent of the size of the system. + Temperature +Density +Pressure +ChemicalPotential - - + + - - + + + + + + + + + - - Speed - Length per unit time. - -Speed in the absolute value of the velocity. - Speed - http://qudt.org/vocab/quantitykind/Speed - 3-8.2 - https://doi.org/10.1351/goldbook.S05852 - - - - - - Liquid - A liquid is a nearly incompressible fluid that conforms to the shape of its container but retains a (nearly) constant volume independent of pressure. - Liquid - A liquid is a nearly incompressible fluid that conforms to the shape of its container but retains a (nearly) constant volume independent of pressure. - - - - - - + + + + + + + + + - - + - + - Workflow - A procedure that has at least two procedures (tasks) as proper parts. - Workflow - A procedure that has at least two procedures (tasks) as proper parts. - - - - - - Shape3Vector - A real vector with 3 elements. - Shape3Vector - A real vector with 3 elements. - The quantity value of physical quantities if real space is a Shape3Vector. + CausalPath + A causal chain is an ordered causal sequence of entities that does not host any bifurcation within itself (a chain). A chain can only be partitioned in time. + The class of entities that possess a temporal structure but no spatial structure. + CausalChain + Elementary + CausalPath + A causal chain is an ordered causal sequence of entities that does not host any bifurcation within itself (a chain). A chain can only be partitioned in time. + The class of entities that possess a temporal structure but no spatial structure. + An electron with at least one causal interaction with another particle. + hasTemporalPart min 2 (Elementary or Quantum) - - + + + + + + + + + + + + + + PhysicalParticle + A well defined physical entity, elementary or composite, usually treated as a singular unit, that is found at scales spanning from the elementary particles to molecules, as fundamental constituents of larger scale substances (as the etymology of "particle" suggests). + The scope of the physical particle definition goes from the elementary particles to molecules, as fundamental constituents of substances. + The union of hadron and lepton, or fermion and bosons. + Particle + PhysicalParticle + The union of hadron and lepton, or fermion and bosons. + A well defined physical entity, elementary or composite, usually treated as a singular unit, that is found at scales spanning from the elementary particles to molecules, as fundamental constituents of larger scale substances (as the etymology of "particle" suggests). + The scope of the physical particle definition goes from the elementary particles to molecules, as fundamental constituents of substances. + + + + - - + + - - Vector - 1-dimensional array who's spatial direct parts are numbers. - LinearArray - 1DArray - Vector - 1-dimensional array who's spatial direct parts are numbers. + + + ActivityDensity + Activity per unit volume of the sample. + ActivityConcentration + VolumetricActivity + VolumicActivity + ActivityDensity + https://qudt.org/vocab/quantitykind/ActivityConcentration + https://www.wikidata.org/wiki/Q423263 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-09 + 10-29 + Activity per unit volume of the sample. - - - DimensionalUnit - A subclass of measurement unit focusing on the physical dimensionality that is carried by the unit. - The current version of EMMO does not provide explicit classes for physical dimensions. Rather it embraces the fact that the physical dimensionality of a physical quantity is carried by its measurement unit. - -The role of dimensional unit and its subclasses is to express the physical dimensionality that is carried by the unit. + + + + CharacterisationProtocol + A characterisation protocol is defined whenever it is desirable to standardize a laboratory method to ensure successful replication of results by others in the same laboratory or by other laboratories. + CharacterisationProtocol + A characterisation protocol is defined whenever it is desirable to standardize a laboratory method to ensure successful replication of results by others in the same laboratory or by other laboratories. + -Since the dimensionality of a physical quantity can be written as the product of powers of the physical dimensions of the base quantities in the selected system of quantities, the physical dimensionality of a measurement unit is uniquely determined by the exponents. For a dimensional unit, at least one of these exponents must be non-zero (making it disjoint from dimensionless units). - DimensionalUnit - A subclass of measurement unit focusing on the physical dimensionality that is carried by the unit. - The current version of EMMO does not provide explicit classes for physical dimensions. Rather it embraces the fact that the physical dimensionality of a physical quantity is carried by its measurement unit. + + + + CharacterisationProcedure + Characterisation procedure may refer to the full characterisation process or just a part of the full process. + The process of performing characterisation by following some existing formalised operative rules. + CharacterisationProcedure + The process of performing characterisation by following some existing formalised operative rules. + Sample preparation +Sample inspection +Calibration +Microscopy +Viscometry +Data sampling + Characterisation procedure may refer to the full characterisation process or just a part of the full process. + -The role of dimensional unit and its subclasses is to express the physical dimensionality that is carried by the unit. + + + + DifferentialOperator + DifferentialOperator + -Since the dimensionality of a physical quantity can be written as the product of powers of the physical dimensions of the base quantities in the selected system of quantities, the physical dimensionality of a measurement unit is uniquely determined by the exponents. For a dimensional unit, at least one of these exponents must be non-zero (making it disjoint from dimensionless units). + + + + + MathematicalOperator + A mapping that acts on elements of one space and produces elements of another space. + MathematicalOperator + A mapping that acts on elements of one space and produces elements of another space. + The algebraic operator '+' that acts on two real numbers and produces one real number. + The differential operator that acts on a C1 real function and produces another real function. - - - ScalarMeson - A meson with spin zero and even parity. - ScalarMeson - A meson with spin zero and even parity. - https://en.wikipedia.org/wiki/Scalar_meson + + + GluonType2 + GluonType2 - - - - LinkedModelsSimulation - A chain of linked physics based model simulations, where equations are solved sequentially. - LinkedModelsSimulation - A chain of linked physics based model simulations, where equations are solved sequentially. + + + BlueStrangeAntiQuark + BlueStrangeAntiQuark - - - - MultiSimulation - A physics based simulation with multiple physics based models. - MultiSimulation - A physics based simulation with multiple physics based models. + + + + Solubility + The analytical composition of a saturated solution, expressed in terms of the proportion of a designated solute in a designated solvent, is the solubility of that solute. + The solubility may be expressed as a concentration, molality, mole fraction, mole ratio, etc. + Solubility + https://www.wikidata.org/wiki/Q170731 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-01-15 + The analytical composition of a saturated solution, expressed in terms of the proportion of a designated solute in a designated solvent, is the solubility of that solute. + https://doi.org/10.1351/goldbook.S05740 - - - - AqueousSolution - A liquid solution in which the solvent is water. - AqueousSolution - A liquid solution in which the solvent is water. + + + + PhysicsBasedSimulation + A simulation that relies on physics based models, according to the Review of Materials Modelling and CWA 17284:2018. + CEN Workshop Agreement – CWA 17284 “Materials modelling – terminology, classification and metadata” + PhysicsBasedSimulation + A simulation that relies on physics based models, according to the Review of Materials Modelling and CWA 17284:2018. - - - - - LiquidSolution - A liquid solution made of two or more component substances. - LiquidSolution - A liquid solution made of two or more component substances. + + + + + Simulation + A estimation of a property using a functional icon. + Modelling + Simulation + A estimation of a property using a functional icon. + I calculate the electrical conductivity of an Ar-He plasma with the Chapman-Enskog method and use the value as property for it. - - - PhysicallyNonInteracting - A causal multipath system is a system made of causal paths that are not interacting between each others, or possibly merge and fork. - A physically unbounded system is a combination of decays and/or annihilations, without any space-like interaction between elementary particles. - PhysicallyNonInteracting - A causal multipath system is a system made of causal paths that are not interacting between each others, or possibly merge and fork. - A physically unbounded system is a combination of decays and/or annihilations, without any space-like interaction between elementary particles. + + + CrystallineMaterial + Suggestion of Rickard Armiento + CrystallineMaterial - + - + - - - - - - ParticleConcentration - ParticleConcentration - https://www.wikidata.org/wiki/Q39078574 - 9-9.1 + + + Permittivity + Measure for how the polarization of a material is affected by the application of an external electric field. + Permittivity + http://qudt.org/vocab/quantitykind/Permittivity + 6-14.1 + 6-14.2 + https://doi.org/10.1351/goldbook.P04507 - + + + + ElectrolyticDeposition + ElectrolyticDeposition + + + + + + FormingFromIonised + FormingFromIonised + + + - + - - - MolecularConcentration - Number of molecules of a substance in a mixture per volume. - MolecularConcentration - https://qudt.org/vocab/quantitykind/MolecularConcentration - https://www.wikidata.org/wiki/Q88865973 - 9-9.2 - Number of molecules of a substance in a mixture per volume. - - - - - - VolumetricNumberDensity - Count per volume. - VolumetricNumberDensity - Count per volume. + + LinearDensityOfElectricCharge + The derivative of the electric charge of a system with respect to the length. + LinearDensityOfElectricCharge + https://www.wikidata.org/wiki/Q77267838 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-09 + 6-5 + The derivative of the electric charge of a system with respect to the length. - - + + + + + DeepDrawing + Forming of vessel parts from a flat mould into a three-dimensional shape by means of a press and tools, whereby material is neither removed nor added + Tiefziehen + DeepDrawing + + + + + + + ReshapeManufacturing + A manufacturing in which workpieces are produced from solid raw parts through permanent deformation, provided that neither material is added nor removed. + The mass of the raw part is equal to the mass of the finished part. + DIN 8580:2020 + Umformen + Forming + ReshapeManufacturing + A manufacturing in which workpieces are produced from solid raw parts through permanent deformation, provided that neither material is added nor removed. + The mass of the raw part is equal to the mass of the finished part. + + + + + + TensileForming + Forming of a solid body, whereby the plastic state is essentially brought about by a combined tensile and compressive stress. + Zugdruckumformen + TensileForming + + + + - - + + + + + + - - - ParticleNumberDensity - Mean number of particles per volume. - ParticleNumberDensity - https://qudt.org/vocab/quantitykind/ParticleNumberDensity - https://www.wikidata.org/wiki/Q98601569 - 10-62.1 - Mean number of particles per volume. - https://doi.org/10.1351/goldbook.N04262 + Estimation + A determination of an object without any actual interaction. + Estimation + A determination of an object without any actual interaction. - + + + Laboratory + The laboratory where the whole characterisation process or some of its stages take place. + Laboratory + The laboratory where the whole characterisation process or some of its stages take place. + + + + + Subjective + A coded conventional that cannot be univocally determined and depends on an agent (e.g. a human individual, a community) acting as black-box. + The word subjective applies to property intrisically subjective or non-well defined. In general, when an black-box-like procedure is used for the definition of the property. + +This happens due to e.g. the complexity of the object, the lack of a underlying model for the representation of the object, the non-well specified meaning of the property symbols. + +A 'SubjectiveProperty' cannot be used to univocally compare 'Object'-s. + +e.g. you cannot evaluate the beauty of a person on objective basis. + Subjective + A coded conventional that cannot be univocally determined and depends on an agent (e.g. a human individual, a community) acting as black-box. + The beauty of that girl. +The style of your clothing. + + + - - SupplyChain - A supply chain is a system of organizations, people, activities, information, and resources involved in supplying a product or service to a consumer. - SupplyChain - A supply chain is a system of organizations, people, activities, information, and resources involved in supplying a product or service to a consumer. + + Gluing + Process for joining two (base) materials by means of an adhesive polymer material + Kleben + Gluing - + - - Network - A system whose is mainly characterised by the way in which elements are interconnected. - Network - A system whose is mainly characterised by the way in which elements are interconnected. + + JoinManufacturing + The permanent joining or other bringing together of two or more workpieces of a geometric shape or of similar workpieces with shapeless material. In each case, the cohesion is created locally and increased as a whole. + A manufacturing involving the creation of long-term connection of several workpieces. + DIN 8580:2020 + Fügen + JoinManufacturing + A manufacturing involving the creation of long-term connection of several workpieces. - - - BlueCharmQuark - BlueCharmQuark + + + + + RelativeMassDensity + Mass density ρ of a substance divided by the mass density ρ0 of a reference substance, under conditions that should be specified for both substances. + RelativeDensity + RelativeMassDensity + https://www.wikidata.org/wiki/Q11027905 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-08 + 4-4 + Mass density ρ of a substance divided by the mass density ρ0 of a reference substance, under conditions that should be specified for both substances. + https://doi.org/10.1351/goldbook.R05262 - - - - SamplingProcess - - Act of extracting a portion (amount) of material from a larger quantity of material. This operation results in obtaining a sample representative of the batch with respect to the property or properties being investigated. - The term can be used to cover either a unit of supply or a portion for analysis. The portion taken may consist of one or more sub-samples and the batch may be the population from which the sample is taken. - SamplingProcess - Act of extracting a portion (amount) of material from a larger quantity of material. This operation results in obtaining a sample representative of the batch with respect to the property or properties being investigated. - The term can be used to cover either a unit of supply or a portion for analysis. The portion taken may consist of one or more sub-samples and the batch may be the population from which the sample is taken. + + + + RatioQuantity + Quantities defined as ratios `Q=A/B` having equal dimensions in numerator and denominator are dimensionless quantities but still have a physical dimension defined as dim(A)/dim(B). + +Johansson, Ingvar (2010). "Metrological thinking needs the notions of parametric quantities, units and dimensions". Metrologia. 47 (3): 219–230. doi:10.1088/0026-1394/47/3/012. ISSN 0026-1394. + The class of quantities that are the ratio of two quantities with the same physical dimensionality. + https://iopscience.iop.org/article/10.1088/0026-1394/47/3/012 + RatioQuantity + http://qudt.org/vocab/quantitykind/DimensionlessRatio + The class of quantities that are the ratio of two quantities with the same physical dimensionality. + refractive index, +volume fraction, +fine structure constant - - - - FreeForming - Free forming is pressure forming with tools that do not or only partially contain the shape of the workpiece and move against each other. - Non la metterei - Printing forms with tools that do not or only partially contain the shape of the workpiece and move against each other. The workpiece shape is created by free or fixed relative movement between the tool and the workpiece (kinematic shape generation). - FreeForming + + + + + IsothermalCompressibility + IsothermalCompressibility + https://qudt.org/vocab/quantitykind/IsothermalCompressibility + https://www.wikidata.org/wiki/Q2990696 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-31 + 5-5.1 - - + + - - - 2 + + - Collection - A collection is the concept that complements the item concept, being an entity that possesses at least one part non directly causally connected with the rest. -A collection can be partitioned in maximally connected items called members. The members are self-connected entities and there is no direct causality relation between them. -The combination of collection and item concepts is the EMMO mereocausality alternative to set theory. However, two items can be members only if they are non direct causally connected, giving some constraints to a collection definition. For example, two entities which are directly connected cannot be two distinct members, while their interiors (i.e. the entities obtained by removing the layer of parts that provides the causal contact between them) can be. - The class of not direct causally self-connected world entities. - Collection - A collection is the concept that complements the item concept, being an entity that possesses at least one part non directly causally connected with the rest. -A collection can be partitioned in maximally connected items called members. The members are self-connected entities and there is no direct causality relation between them. -The combination of collection and item concepts is the EMMO mereocausality alternative to set theory. However, two items can be members only if they are non direct causally connected, giving some constraints to a collection definition. For example, two entities which are directly connected cannot be two distinct members, while their interiors (i.e. the entities obtained by removing the layer of parts that provides the causal contact between them) can be. - The class of not direct causally self-connected world entities. - The collection of users of a particular software, the collection of atoms that have been part of that just dissociated molecule. + + + Compressibility + Measure of the relative volume change of a fluid or solid as a response to a pressure change. + Compressibility + https://qudt.org/vocab/quantitykind/Compressibility + https://www.wikidata.org/wiki/Q8067817 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-70 + 4-20 + Measure of the relative volume change of a fluid or solid as a response to a pressure change. - + - - - SlowingDownArea - In an infinite homogenous medium, one-sixth of the mean square of the distance between the neutron source and the point where a neutron reaches a given energy. - SlowingDownArea - https://qudt.org/vocab/quantitykind/Slowing-DownArea - https://www.wikidata.org/wiki/Q98950918 - 10-72.1 - In an infinite homogenous medium, one-sixth of the mean square of the distance between the neutron source and the point where a neutron reaches a given energy. + + + MolarEnthalpy + MolarEnthalpy + https://www.wikidata.org/wiki/Q88769977 + Enthalpy per amount of substance. + 9-6.2 - + - + - - - Area - Extent of a surface. - Area - http://qudt.org/vocab/quantitykind/Area - 3-3 - https://doi.org/10.1351/goldbook.A00429 + MolarEnergy + Energy per amount of substance. + MolarEnergy + https://qudt.org/vocab/quantitykind/MolarEnergy + https://www.wikidata.org/wiki/Q69427512 + Energy per amount of substance. - - - - ReactivePower - Imaginary part of the complex power. - ReactivePower - https://qudt.org/vocab/quantitykind/ReactivePower - https://www.wikidata.org/wiki/Q2144613 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-11-44 - 6-60 - Imaginary part of the complex power. - - - - - DiscreteData - A discrete schema may be based on a continuum material basis that is filtered according to its variations. For example, a continuous voltage based signal can be considered 1 or 0 according to some threshold. -Discrete does not mean tha the material basis is discrete, but that the data are encoded according to such step-based rules. - Data whose variations are decoded according to a discrete schema. - DiscreteData - Data whose variations are decoded according to a discrete schema. - A text is a collection of discrete symbols. A compact disc is designed to host discrete states in the form of pits and lands. - A discrete schema may be based on a continuum material basis that is filtered according to its variations. For example, a continuous voltage based signal can be considered 1 or 0 according to some threshold. -Discrete does not mean tha the material basis is discrete, but that the data are encoded according to such step-based rules. + + + + Assemblying + No loss or adds of parts by the components, nor merging. In assemblying parts are losing some of theirs movement degrees of freedom. + The act of connecting together the parts of something + Assemblying + The act of connecting together the parts of something + No loss or adds of parts by the components, nor merging. In assemblying parts are losing some of theirs movement degrees of freedom. - + - - Voltage - Correspond to the work needed per unit of charge to move a test charge between two points in a static electric field. - The difference in electric potential between two points. - ElectricPotentialDifference - ElectricTension - Voltage - http://qudt.org/vocab/quantitykind/Voltage - 6-11.3 - The difference in electric potential between two points. - https://doi.org/10.1351/goldbook.A00424 - https://doi.org/10.1351/goldbook.V06635 + + + TotalIonization + Quotient of the total mean charge of all positive ions produced by an ionizing charged particle along its entire path and along the paths of any secondary charged particles, and the elementary charge. + TotalIonization + https://qudt.org/vocab/quantitykind/TotalIonization + https://www.wikidata.org/wiki/Q98690787 + 10-59 + Quotient of the total mean charge of all positive ions produced by an ionizing charged particle along its entire path and along the paths of any secondary charged particles, and the elementary charge. - - - - - - - - - - - - ElectricPotential - The electric potential is not unique, since any constant scalar -field quantity can be added to it without changing its gradient. - Energy required to move a unit charge through an electric field from a reference point. - ElectroStaticPotential - ElectricPotential - http://qudt.org/vocab/quantitykind/ElectricPotential - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-25 - https://dbpedia.org/page/Electric_potential - 6-11.1 - Energy required to move a unit charge through an electric field from a reference point. - https://en.wikipedia.org/wiki/Electric_potential - https://doi.org/10.1351/goldbook.E01935 + + + + PotentiometricStrippingAnalysis + + historically for the analysis of metal ions, mercury ions were added to the test solution to form a mercury amalgam when reduced. Alternatively, an HMDE or MFE was used and the oxidizing agent added after amalgam formation. However, the toxicity of mercury and its compounds have all but precluded the present-day use of mercury + the accumulation is similar to that used in stripping voltammetry + the stripping potentiogram shows staircase curves of potential as a function of time. Frequently, the first derivative is displayed (dE/dt=f(t)), as this produces peak-shaped signals. The time between transitions (peaks) is proportional to the concentration of analyte in the test solution + the time between changes in potential in step 2 is related to the concentration of analyte in the solution + two-step electrochemical measurement in which 1) material is accumulated at an electrode and 2) the material is removed by chemical reaction or electrochemically at constant current with measurement of electrode potential + PSA + PotentiometricStrippingAnalysis + two-step electrochemical measurement in which 1) material is accumulated at an electrode and 2) the material is removed by chemical reaction or electrochemically at constant current with measurement of electrode potential - + - Dielectrometry + Voltammetry - Dielectrometric titrations use dielectrometry for the end-point detection. - The method is used to monitor the purity of dielectrics, for example to detect small amounts of moisture. - electrochemical measurement principle based on the measurement of the dielectric constant of a sample resulting from the orientation of particles (molecules or ions) that have a dipole moment in an electric field - Dielectrometry - electrochemical measurement principle based on the measurement of the dielectric constant of a sample resulting from the orientation of particles (molecules or ions) that have a dipole moment in an electric field + The current vs. potential (I-E) curve is called a voltammogram. + Voltammetry is an analytical technique based on the measure of the current flowing through an electrode dipped in a solution containing electro-active compounds, while a potential scanning is imposed upon it. + Voltammetry + https://www.wikidata.org/wiki/Q904093 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-04-11 + Voltammetry is an analytical technique based on the measure of the current flowing through an electrode dipped in a solution containing electro-active compounds, while a potential scanning is imposed upon it. + https://en.wikipedia.org/wiki/Voltammetry https://doi.org/10.1515/pac-2018-0109 - + - - ElectrochemicalTesting + + Signal - In electrochemical characterization, the measurement of potential, charge, or current is used to determine an analyte's concentration or to characterize an analyte's chemical reactivity - http://dx.doi.org/10.1016/B978-0-323-46140-5.00002-9 - ElectrochemicalTesting - In electrochemical characterization, the measurement of potential, charge, or current is used to determine an analyte's concentration or to characterize an analyte's chemical reactivity + According to UPAC Compendium of Chemical Terminology, a “signal” is “A representation of a quantity within an analytical instrument” (https://goldbook.iupac.org/terms/view/S05661 ). + Result (effect) of the interaction between the sample and the probe, which usually is a measurable and quantifiable quantity. + Signal is usually emitted from a characteristic “emission” volume, which can be different from the sample/probe “interaction” volume and can be usually quantified using proper physics equations and/or modelling of the interaction mechanisms. + Signal + According to UPAC Compendium of Chemical Terminology, a “signal” is “A representation of a quantity within an analytical instrument” (https://goldbook.iupac.org/terms/view/S05661 ). + Result (effect) of the interaction between the sample and the probe, which usually is a measurable and quantifiable quantity. + Signal is usually emitted from a characteristic “emission” volume, which can be different from the sample/probe “interaction” volume and can be usually quantified using proper physics equations and/or modelling of the interaction mechanisms. - + - T+2 L0 M-1 I+1 Θ+1 N0 J0 + T-3 L-1 M+1 I0 Θ+1 N0 J0 - TemperaturePerMagneticFluxDensityUnit - TemperaturePerMagneticFluxDensityUnit + TemperaturePressurePerTimeUnit + TemperaturePressurePerTimeUnit - - - - - - - T+3 L0 M-1 I+2 Θ0 N-1 J0 - - - AmountConductivityUnit - AmountConductivityUnit + + + + PseudoOpenCircuitVoltageMethod + + a technique used to measure the voltage of a cell under a low applied current as an estimate for the open-circuit voltage + PseudoOCV + PseudoOpenCircuitVoltageMethod + a technique used to measure the voltage of a cell under a low applied current as an estimate for the open-circuit voltage - - - - - PhaseCoefficient - Change of phase angle with the length along the path travelled by a plane wave. - The imaginary part of the propagation coefficient. - PhaseChangeCoefficient - PhaseCoefficient - https://qudt.org/vocab/quantitykind/PhaseCoefficient - https://www.wikidata.org/wiki/Q32745742 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-10-20 - 3-26.2 - Change of phase angle with the length along the path travelled by a plane wave. - The imaginary part of the propagation coefficient. - https://en.wikipedia.org/wiki/Propagation_constant#Phase_constant + + + + Chronopotentiometry + Potentiometry in which the potential is measured with time following a change in applied current. The change in applied current is usually a step, but cyclic current reversals or linearly increasing currents are also used. + Chronopotentiometry + Potentiometry in which the potential is measured with time following a change in applied current. The change in applied current is usually a step, but cyclic current reversals or linearly increasing currents are also used. + https://doi.org/10.1515/pac-2018-0109 - - + + + + + + + + + + + + + + + + + + + UpAntiQuarkType + UpAntiQuarkType + + + + - - + + - - - MolarMass - Mass per amount of substance. - MolarMass - https://qudt.org/vocab/quantitykind/MolarMass - https://www.wikidata.org/wiki/Q145623 - 9-4 - Mass per amount of substance. + + + + + + + + + + + + + Workflow + A procedure that has at least two procedures (tasks) as proper parts. + Workflow + A procedure that has at least two procedures (tasks) as proper parts. - - - - + + + - - T-2 L+2 M0 I0 Θ0 N0 J0 + + + + + + - - AbsorbedDoseUnit - AbsorbedDoseUnit + + + Task + A procedure that is an hoilistic part of a workflow. + A task is a generic part of a workflow, without taking care of the task granularities. +It means that you can declare that e.g. tightening a bolt is a task of building an airplane, without caring of the coarser tasks to which this tightening belongs. + Job + Task + A procedure that is an hoilistic part of a workflow. + A task is a generic part of a workflow, without taking care of the task granularities. +It means that you can declare that e.g. tightening a bolt is a task of building an airplane, without caring of the coarser tasks to which this tightening belongs. - - - - Nanoindentation - - Nanoindentation (known also as nanoindentation test) is a method for testing the hardness and related mechanical properties of materials, facilitated by high-precision instrumentation in the nanometer scale, as well as analytical and computational algorithms for result evaluation. - Nanoindentation - Nanoindentation (known also as nanoindentation test) is a method for testing the hardness and related mechanical properties of materials, facilitated by high-precision instrumentation in the nanometer scale, as well as analytical and computational algorithms for result evaluation. - By definition, when someone performs nanoindentation, it refers to either quasistatic or continuous stiffness measurement. However, in reality with a nanoindenter it is also possible to perform scratch testing, scanning probe microscopy, and apply non-contact surface energy mapping, which can also be called nanoindentation, because they are measurements conducted using an nanoindenter. + + + + Machining + A manufacturing in which material is removed from the workpiece in the form of chips. + RemovingChipsFromWorkpiece + Machining + A manufacturing in which material is removed from the workpiece in the form of chips. - - - - HydrodynamicVoltammetry - - A linear potential scan, at sufficiently slow scan rates so as to ensure a steady state response, is usually applied. - Mass transport of a redox species enhanced by convection in this way results in a greater electric current. Convective mass transfer occurs up to the diffusion-limiting layer, within which the mass transfer is controlled by diffusion. Electroactive substance depletion outside the diffusion layer is annulled by convective mass transfer, which results in steady- state sigmoidal wave-shaped current-potential curves. - The forced flow can be accomplished by movement either of the solution (solution stirring, or channel flow), or of the electrode (electrode rotation or vibration). - voltammetry with forced flow of the solution towards the electrode surface - HydrodynamicVoltammetry - https://www.wikidata.org/wiki/Q17028237 - voltammetry with forced flow of the solution towards the electrode surface - https://en.wikipedia.org/wiki/Hydrodynamic_voltammetry - https://doi.org/10.1515/pac-2018-0109 + + + + DefinedEdgeCutting + Machining in which a tool is used whose number of cutting edges, geometry of the cutting wedges and position of the cutting edges in relation to the workpiece are determined + Spanen mit geometrisch bestimmten Schneiden + DefinedEdgeCutting - + + + + PhysicalPhenomenon + A 'process' that is recognized by physical sciences and is categorized accordingly. + While every 'process' in the EMMO involves physical objects, this class is devoted to represent real world objects that express a phenomenon relevant for the ontologist + PhysicalPhenomenon + A 'process' that is recognized by physical sciences and is categorized accordingly. + + + - - ObjectiveProperty - A quantity that is obtained from a well-defined procedure. - Subclasses of 'ObjectiveProperty' classify objects according to the type semiosis that is used to connect the property to the object (e.g. by measurement, by convention, by modelling). - The word objective does not mean that each observation will provide the same results. It means that the observation followed a well defined procedure. + Process + A process can be defined only according to an entity type. The minimum process is an entity made of two entities of the same type that are temporally related. + A whole that is identified according to a criteria based on its temporal evolution that is satisfied throughout its time extension. + Following the common definition of process, the reader may think that every whole should be a process, since every 4D object always has a time dimension. However, in the EMMO we restrict the meaning of the word process to items whose evolution in time have a particular meaning for the ontologist (i.e. every 4D object unfolds in time, but not every 4D time unfolding may be of interest for the ontologist and categorized as a process). -This class refers to what is commonly known as physical property, i.e. a measurable property of physical system, whether is quantifiable or not. - PhysicalProperty - QuantitativeProperty - ObjectiveProperty - A quantity that is obtained from a well-defined procedure. - The word objective does not mean that each observation will provide the same results. It means that the observation followed a well defined procedure. +For this reason, the definition of every specific process subclass requires the introduction of a primitive concept. + Occurrent + Perdurant + Process + A whole that is identified according to a criteria based on its temporal evolution that is satisfied throughout its time extension. + A process can be defined only according to an entity type. The minimum process is an entity made of two entities of the same type that are temporally related. + -This class refers to what is commonly known as physical property, i.e. a measurable property of physical system, whether is quantifiable or not. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + FundamentalFermion + A particle with half odd integer spin (1/2, 3/2, etc...) that follows Fermi-Dirac statistics. + FundamentalFermion + A particle with half odd integer spin (1/2, 3/2, etc...) that follows Fermi-Dirac statistics. + https://en.wikipedia.org/wiki/Fermion + + + + + + Chromatography + In chemical analysis, chromatography is a laboratory technique for the separation of a mixture into its components. + Chromatography + In chemical analysis, chromatography is a laboratory technique for the separation of a mixture into its components. + https://en.wikipedia.org/wiki/Chromatography + + + + + + CharacterisationTechnique + A characterisation method is not only related to the measurement process which can be one of its steps. + The description of the overall characterisation method. It can be composed of different steps (e.g. sample preparation, calibration, measurement, post-processing). + Characterisation procedure + Characterisation technique + CharacterisationTechnique + The description of the overall characterisation method. It can be composed of different steps (e.g. sample preparation, calibration, measurement, post-processing). + A characterisation method is not only related to the measurement process which can be one of its steps. + + + + + Object + A continuant (here called object) is usually defined as a whole whose all possible temporal parts are always satisfying a specific criterion (wich is the classical definition of continuants). +However that's not possible in general, since we will finally end to temporal parts whose temporal extension is so small that the connectivity relations that define the object will no longer hold. That's the case when the temporal interval is lower than the interval that characterize the causality interactions between the object parts. +In other terms, if the time span of a temporal part is lower than the inverse of the frequency of interactions between the constituents, then the constituents in such temporal part are not connected. The object is no more an object, neither an item, but simply a collection of fundamental parts. +To overcome this issue, we can identify an minimum holistic temporal part (a lower time interval value), below which a specific definition for an object type does not hold anymore, that is called a fundamental. + A whole that is identified according to a criteria based on its spatial configuration that is satisfied throughout its time extension. + Continuant + Endurant + Object + A whole that is identified according to a criteria based on its spatial configuration that is satisfied throughout its time extension. + + + + + + + + + + + + + + + + + + + + + ElectronType + ElectronType @@ -4666,4724 +4962,2862 @@ The Schrödinger equation. The Navier-Stokes equation. - - - - SamplePreparationParameter - - Parameter used for the sample preparation process - SamplePreparationParameter - Parameter used for the sample preparation process - - - - - - - ParticlePositionVector - Position vector of a particle. - ParticlePositionVector - https://qudt.org/vocab/quantitykind/ParticlePositionVector - https://www.wikidata.org/wiki/Q105533324 - 12-7.1 - Position vector of a particle. - - - - + + - - + + - - - PositionVector - In the usual geometrical three-dimensional space, position vectors are quantities of the dimension length. - --- IEC - Position vectors are so-called bounded vectors, i.e. their magnitude and direction depend on the particular coordinate system used. - --- ISO 80000-3 - Vector r characterizing a point P in a point space with a given origin point O. - Position - PositionVector - http://qudt.org/vocab/quantitykind/PositionVector - Vector r characterizing a point P in a point space with a given origin point O. + + PhysicsBasedModel + A mathematical entity based on a fundamental physics theory which defines the relations between physics quantities of an entity. + CEN Workshop Agreement – CWA 17284 “Materials modelling – terminology, classification and metadata” + PhysicsBasedModel + A mathematical entity based on a fundamental physics theory which defines the relations between physics quantities of an entity. - - + + - - - 1 + + - - - - - - - - - - - - - - - - - - - - - Quantity - A quantifiable property of a phenomenon, body, or substance. - VIM defines a quantity as a "property of a phenomenon, body, or substance, where the property has a magnitude that can be expressed as a number and a reference". - -A quantity in EMMO is a property and therefore only addresses the first part of the VIM definition (that is a property of a phenomenon, body, or substance). The second part (that it can be expressed as a number and a reference) is syntactic and addressed by emmo:QuantityValue. - Measurand - Quantity - https://qudt.org/schema/qudt/Quantity - A quantifiable property of a phenomenon, body, or substance. - length -Rockwell C hardness -electric resistance - measurand - quantity - VIM defines a quantity as a "property of a phenomenon, body, or substance, where the property has a magnitude that can be expressed as a number and a reference". + + + Equation + An equation with variables can always be represented as: -A quantity in EMMO is a property and therefore only addresses the first part of the VIM definition (that is a property of a phenomenon, body, or substance). The second part (that it can be expressed as a number and a reference) is syntactic and addressed by emmo:QuantityValue. +f(v0, v1, ..., vn) = g(v0, v1, ..., vn) + +where f is the left hand and g the right hand side expressions and v0, v1, ..., vn are the variables. + The class of 'mathematical'-s that stand for a statement of equality between two mathematical expressions. + Equation + The class of 'mathematical'-s that stand for a statement of equality between two mathematical expressions. + 2+3 = 5 +x^2 +3x = 5x +dv/dt = a +sin(x) = y - - - - - - - - - - - ElectricInductance - A property of an electrical conductor by which a change in current through it induces an electromotive force in both the conductor itself and in any nearby conductors by mutual inductance. - Inductance - ElectricInductance - http://qudt.org/vocab/quantitykind/Inductance - https://www.wikidata.org/wiki/Q177897 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-19 - 6-41.1 - A property of an electrical conductor by which a change in current through it induces an electromotive force in both the conductor itself and in any nearby conductors by mutual inductance. - https://doi.org/10.1351/goldbook.M04076 + + + + + Expression + A well-formed finite combination of mathematical symbols according to some specific rules. + Expression + A well-formed finite combination of mathematical symbols according to some specific rules. - - - - - RelativePermeability - Scalar quantity or tensor quantity equal to the absolute permeability divided by the magnetic constant. - RelativePermeability - https://qudt.org/vocab/quantitykind/ElectromagneticPermeabilityRatio - https://www.wikidata.org/wiki/Q77785645 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-12-29 - 6-27 - Scalar quantity or tensor quantity equal to the absolute permeability divided by the magnetic constant. - https://doi.org/10.1351/goldbook.R05272 + + + + + Constituent + An object which is an holistic spatial part of a object. + ObjectPart + Constituent + An object which is an holistic spatial part of a object. + A tire is a constituent of a car. - - - - RatioQuantity - Quantities defined as ratios `Q=A/B` having equal dimensions in numerator and denominator are dimensionless quantities but still have a physical dimension defined as dim(A)/dim(B). + + + NonTemporalRole + An holistic spatial part of a whole. + HolisticSpatialPart + NonTemporalRole + An holistic spatial part of a whole. + -Johansson, Ingvar (2010). "Metrological thinking needs the notions of parametric quantities, units and dimensions". Metrologia. 47 (3): 219–230. doi:10.1088/0026-1394/47/3/012. ISSN 0026-1394. - The class of quantities that are the ratio of two quantities with the same physical dimensionality. - https://iopscience.iop.org/article/10.1088/0026-1394/47/3/012 - RatioQuantity - http://qudt.org/vocab/quantitykind/DimensionlessRatio - The class of quantities that are the ratio of two quantities with the same physical dimensionality. - refractive index, -volume fraction, -fine structure constant + + + + DynamicLightScattering + + Dynamic light scattering (DLS) is a technique in physics that can be used to determine the size distribution profile of small particles in suspension or polymers in solution. In the scope of DLS, temporal fluctuations are usually analyzed using the intensity or photon auto-correlation function (also known as photon correlation spectroscopy - PCS or quasi-elastic light scattering - QELS). + DLS + DynamicLightScattering + Dynamic light scattering (DLS) is a technique in physics that can be used to determine the size distribution profile of small particles in suspension or polymers in solution. In the scope of DLS, temporal fluctuations are usually analyzed using the intensity or photon auto-correlation function (also known as photon correlation spectroscopy - PCS or quasi-elastic light scattering - QELS). - + + + + CentreOfMass + In non-relativistic physics, the centre of mass doesn’t depend on the chosen reference frame. + The unique point where the weighted relative position of the distributed mass of an Item sums to zero. Equivalently, it is the point where if a force is applied to the Item, causes the Item to move in direction of force without rotation. + CentreOfMass + The unique point where the weighted relative position of the distributed mass of an Item sums to zero. Equivalently, it is the point where if a force is applied to the Item, causes the Item to move in direction of force without rotation. + https://en.wikipedia.org/wiki/Center_of_mass + + + - + - - AffinityOfAChemicalReaction - Describes elements' or compounds' readiness to form bonds. - ChemicalAffinity - AffinityOfAChemicalReaction - https://qudt.org/vocab/quantitykind/ChemicalAffinity - https://www.wikidata.org/wiki/Q382783 - 9-30 - Describes elements' or compounds' readiness to form bonds. - https://doi.org/10.1351/goldbook.A00178 - - - - - - - - - T0 L0 M+1 I0 Θ0 N+1 J0 - - - MassAmountOfSubstanceUnit - MassAmountOfSubstanceUnit - - - - - - Solution - A solution is a homogeneous mixture composed of two or more substances. - Solutions are characterized by the occurrence of Rayleigh scattering on light, - Solution - A solution is a homogeneous mixture composed of two or more substances. - + + + PositionVector + In the usual geometrical three-dimensional space, position vectors are quantities of the dimension length. - - - - PhaseHomogeneousMixture - A single phase mixture. - PhaseHomogeneousMixture - A single phase mixture. - +-- IEC + Position vectors are so-called bounded vectors, i.e. their magnitude and direction depend on the particular coordinate system used. - - - - - - - T+1 L-1 M0 I0 Θ0 N0 J0 - - - TimePerLengthUnit - TimePerLengthUnit +-- ISO 80000-3 + Vector r characterizing a point P in a point space with a given origin point O. + Position + PositionVector + http://qudt.org/vocab/quantitykind/PositionVector + Vector r characterizing a point P in a point space with a given origin point O. - - - - Tempering - Process consisting of two steps: - first, the steel is heated in a quenching treatment to a temperature above Ac3 and then rapidly cooled in a liquid to produce a process-specific grain structure; - subsequently, the steel is heated to a specific temperature during tempering to set the desired property and cooled in air. - QuenchingAndTempering - Vergüten - Tempering - Process consisting of two steps: - first, the steel is heated in a quenching treatment to a temperature above Ac3 and then rapidly cooled in a liquid to produce a process-specific grain structure; - subsequently, the steel is heated to a specific temperature during tempering to set the desired property and cooled in air. + + + + ScanningKelvinProbe + + Scanning Kelvin probe (SKP) and scanning Kelvin probe force microscopy (SKPFM) are probe techniques which permit mapping of topography and Volta potential distribution on electrode surfaces. It measures the surface electrical potential of a sample without requiring an actual physical contact. + SKB + ScanningKelvinProbe + Scanning Kelvin probe (SKP) and scanning Kelvin probe force microscopy (SKPFM) are probe techniques which permit mapping of topography and Volta potential distribution on electrode surfaces. It measures the surface electrical potential of a sample without requiring an actual physical contact. - - - - URI - A Uniform Resource Identifier (URI) is a compact sequence of characters that identifies an abstract or physical resource. - URI = scheme ":" ["//" authority] path ["?" query] ["#" fragment] - URI - https://en.wikipedia.org/wiki/File:URI_syntax_diagram.svg - A Uniform Resource Identifier (URI) is a compact sequence of characters that identifies an abstract or physical resource. - URI = scheme ":" ["//" authority] path ["?" query] ["#" fragment] + + + + Microscopy + + Microscopy is a category of characterization techniques which probe and map the surface and sub-surface structure of a material. These techniques can use photons, electrons, ions or physical cantilever probes to gather data about a sample's structure on a range of length scales. + Microscopy + Microscopy is a category of characterization techniques which probe and map the surface and sub-surface structure of a material. These techniques can use photons, electrons, ions or physical cantilever probes to gather data about a sample's structure on a range of length scales. - + + - - ElectricSusceptibility - Electric polarization divided by electric constant and electric field strength. - ElectricSusceptibility - https://qudt.org/vocab/quantitykind/ElectricSusceptibility - https://www.wikidata.org/wiki/Q598305 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-12-19 - 6-16 - Electric polarization divided by electric constant and electric field strength. - https://en.wikipedia.org/wiki/Electric_susceptibility + LogarithmicDecrement + Product of damping coefficient and period duration. + LogarithmicDecrement + https://www.wikidata.org/wiki/Q1399446 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-05-25 + 3-25 + Product of damping coefficient and period duration. - - - - - AngularWavenumber - Magnitude of the wave vector. - AngularRepetency - AngularWavenumber - https://qudt.org/vocab/quantitykind/AngularWavenumber - https://www.wikidata.org/wiki/Q30338487 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-10-12 - 3-22 - Magnitude of the wave vector. - - - - - - - - - - - - - AmountOfSubstance - "In the name “amount of substance”, the word “substance” will typically be replaced by words to specify the substance concerned in any particular application, for example “amount of hydrogen chloride, HCl”, or “amount of benzene, C6H6 ”. It is important to give a precise definition of the entity involved (as emphasized in the definition of the mole); this should preferably be done by specifying the molecular chemical formula of the material involved. Although the word “amount” has a more general dictionary definition, the abbreviation of the full name “amount of substance” to “amount” may be used for brevity." - --- SI Brochure - The number of elementary entities present. - AmountOfSubstance - http://qudt.org/vocab/quantitykind/AmountOfSubstance - 9-2 - The number of elementary entities present. - https://doi.org/10.1351/goldbook.A00297 - - - - - - - Extensive - A quantity whose magnitude is additive for subsystems. - Note that not all physical quantities can be categorised as being either intensive or extensive. For example the square root of the mass. - Extensive - A quantity whose magnitude is additive for subsystems. - Mass -Volume -Entropy + + + + + + + + + + + + Data + A data is a causal object whose variations (non-uniformity) can be recognised and eventually interpreted. +A data can be of different physical types (e.g., matter, wave, atomic excited states). +How the variations are recognised and eventually decoded depends on the interpreting rules that characterise that type of data. +Variations are pure physical variations and do not necessarily possess semantic meaning. + A perspective in which entities are represented according to the variation of their properties. + Luciano Floridi, "Information - A very Short Introduction", Oxford University Press., (2010) ISBN 978-0199551378 + Contrast + Dedomena + Pattern + Data + A perspective in which entities are represented according to the variation of their properties. + A data is a causal object whose variations (non-uniformity) can be recognised and eventually interpreted. +A data can be of different physical types (e.g., matter, wave, atomic excited states). +How the variations are recognised and eventually decoded depends on the interpreting rules that characterise that type of data. +Variations are pure physical variations and do not necessarily possess semantic meaning. + The covering axiom that defines the data class discriminates within all the possible causal objects between encoded or non encoded. - - - - TensileForming - Forming of a solid body, whereby the plastic state is essentially brought about by a combined tensile and compressive stress. - Zugdruckumformen - TensileForming - + + + + + + + + + + + + + + + + + + + Item + A world entity is direct causally self-connected if any two parts that make up the whole are direct causally connected to each other. In the EMMO, topological connectivity is based on causality. +All physical objects, i.e. entities whose behaviour is explained by physics laws, are represented only by items. In other words, a physical object part is embedded in a direct causal graph that provides always a path between two of its parts. +Members of a collection lack such direct causality connection, i.e. they do not constitute a physical object. - - - - - ReshapeManufacturing - A manufacturing in which workpieces are produced from solid raw parts through permanent deformation, provided that neither material is added nor removed. - The mass of the raw part is equal to the mass of the finished part. - DIN 8580:2020 - Umformen - Forming - ReshapeManufacturing - A manufacturing in which workpieces are produced from solid raw parts through permanent deformation, provided that neither material is added nor removed. - The mass of the raw part is equal to the mass of the finished part. - +Following graph theory concepts, the quantums of an item are all connected together within a network of causal relations, forming a connected causal graph. A collection is then a set of disconnected graphs. + The class of individuals standing for direct causally self-connected world entities. + The disjoint union of Elementary, Quantum and CausalSystem classes. + Item + A world entity is direct causally self-connected if any two parts that make up the whole are direct causally connected to each other. In the EMMO, topological connectivity is based on causality. +All physical objects, i.e. entities whose behaviour is explained by physics laws, are represented only by items. In other words, a physical object part is embedded in a direct causal graph that provides always a path between two of its parts. +Members of a collection lack such direct causality connection, i.e. they do not constitute a physical object. - - - GluonType4 - GluonType4 +Following graph theory concepts, the quantums of an item are all connected together within a network of causal relations, forming a connected causal graph. A collection is then a set of disconnected graphs. + The disjoint union of Elementary, Quantum and CausalSystem classes. + The class of individuals standing for direct causally self-connected world entities. - + - - - - - T+1 L-2 M0 I+1 Θ0 N0 J0 - - - ElectricDisplacementFieldUnit - ElectricDisplacementFieldUnit + + DisplacementCurrentDensity + Vector quantity equal to the time derivative of the electric flux density. + DisplacementCurrentDensity + https://qudt.org/vocab/quantitykind/DisplacementCurrentDensity + https://www.wikidata.org/wiki/Q77614612 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-42 + 6-18 + Vector quantity equal to the time derivative of the electric flux density. - + - + - - ParticleCurrentDensity - Number of particles per time and area crossing a surface. - ParticleCurrentDensity - https://qudt.org/vocab/quantitykind/ParticleCurrent - https://www.wikidata.org/wiki/Q2400689 - 10-48 - Number of particles per time and area crossing a surface. + + + ElectricCurrentDensity + Electric current divided by the cross-sectional area it is passing through. + AreicElectricCurrent + CurrentDensity + ElectricCurrentDensity + http://qudt.org/vocab/quantitykind/ElectricCurrentDensity + https://www.wikidata.org/wiki/Q234072 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-11 + 6-8 + https://en.wikipedia.org/wiki/Current_density + https://doi.org/10.1351/goldbook.E01928 - + + + + ParallelWorkflow + ParallelWorkflow + + + - + - - SolubilityProduct - For the dissociation of a salt AmBn → mA + nB, the solubility product is KSP = am(A) ⋅ an(B), where a is ionic activity and m and n are the stoichiometric numbers. - product of the ion activities of the ions resulting from the dissociation of a solute in a saturated solution, raised to powers equal to their stoichiometric numbers. - SolubilityProductConstant - SolubilityProduct - https://www.wikidata.org/wiki/Q11229788 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-01-23 - product of the ion activities of the ions resulting from the dissociation of a solute in a saturated solution, raised to powers equal to their stoichiometric numbers. - https://doi.org/10.1351/goldbook.S05742 - - - - - - EquilibriumConstant - The physical dimension can change based on the stoichiometric numbers of the substances involved. - for solutions, product for all substances B of concentration c_B of substance B in power of its stoichiometric number v_B: K_p = \sum_B{c_B^{v_B}}. - EquilibriumConstantConcentrationBasis - EquilibriumConstant - https://qudt.org/vocab/quantitykind/EquilibriumConstant - https://www.wikidata.org/wiki/Q857809 - for solutions, product for all substances B of concentration c_B of substance B in power of its stoichiometric number v_B: K_p = \sum_B{c_B^{v_B}}. - https://en.wikipedia.org/wiki/Equilibrium_constant - https://doi.org/10.1351/goldbook.E02177 + AngularVelocity + Axial vector quantity describing the rotation around an axis, with magnitude ω=|dφ/dt|, where dφ is the plane angle change during the infinitesimal time interval with duration dt, and with direction along the axis for which the rotation is clockwise. + AngularVelocity + https://qudt.org/vocab/quantitykind/AngularVelocity + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-01-41 + https://dbpedia.org/page/Angular_velocity + 3-12 + Axial vector quantity describing the rotation around an axis, with magnitude ω=|dφ/dt|, where dφ is the plane angle change during the infinitesimal time interval with duration dt, and with direction along the axis for which the rotation is clockwise. + https://en.wikipedia.org/wiki/Angular_velocity - + - + - Permeance - Inverse of the reluctance. - Permeance - https://qudt.org/vocab/quantitykind/Permeance - https://www.wikidata.org/wiki/Q77997985 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-29 - 6-40 - Inverse of the reluctance. + Coercivity + Coercive field strength in a substance when either the magnetic flux density or the magnetic polarization and magnetization is brought from its value at magnetic saturation to zero by monotonic reduction of the applied magnetic field strength. + Coercivity + https://qudt.org/vocab/quantitykind/Coercivity + https://www.wikidata.org/wiki/Q432635 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-12-69 + 6-31 + Coercive field strength in a substance when either the magnetic flux density or the magnetic polarization and magnetization is brought from its value at magnetic saturation to zero by monotonic reduction of the applied magnetic field strength. - + - - - - - - - - ProbeSampleInteraction + + SamplingProcess - Process representing the interaction between the Probe and the Sample (with a certain Interaction Volume) which generates a Signal - ProbeSampleInteraction - Process representing the interaction between the Probe and the Sample (with a certain Interaction Volume) which generates a Signal + Act of extracting a portion (amount) of material from a larger quantity of material. This operation results in obtaining a sample representative of the batch with respect to the property or properties being investigated. + The term can be used to cover either a unit of supply or a portion for analysis. The portion taken may consist of one or more sub-samples and the batch may be the population from which the sample is taken. + SamplingProcess + Act of extracting a portion (amount) of material from a larger quantity of material. This operation results in obtaining a sample representative of the batch with respect to the property or properties being investigated. + The term can be used to cover either a unit of supply or a portion for analysis. The portion taken may consist of one or more sub-samples and the batch may be the population from which the sample is taken. - - - - Probe + + + + + + + T+4 L0 M-1 I+2 Θ0 N0 J0 + + + SquareCurrentQuarticTimePerMassUnit + SquareCurrentQuarticTimePerMassUnit + + + + + + + SolidAngularMeasure + Measure of a conical geometric figure, called solid angle, formed by all rays, originating from a common point, called the vertex of the solid angle, and passing through the points of a closed, non-self-intersecting curve in space considered as the border of a surface. + SolidAngle + SolidAngularMeasure + https://qudt.org/vocab/quantitykind/SolidAngle + https://www.wikidata.org/wiki/Q208476 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=102-04-46 + https://dbpedia.org/page/Solid_angle + 3-8 + Measure of a conical geometric figure, called solid angle, formed by all rays, originating from a common point, called the vertex of the solid angle, and passing through the points of a closed, non-self-intersecting curve in space considered as the border of a surface. + https://en.wikipedia.org/wiki/Solid_angle + + + + + + Angle + Ratio of circular arc length to radius. + PlaneAngle + Angle + http://qudt.org/vocab/quantitykind/PlaneAngle + Ratio of circular arc length to radius. + 3-5 + https://doi.org/10.1351/goldbook.A00346 + + + + + CausallHairedSystem + CausallHairedSystem + + + + + + ThreePointBendingTesting - Probe is the physical tool (i.e., a disturbance, primary solicitation, or a gadget), controlled over time, that generates measurable fields that interact with the sample to acquire information on the specimen’s behaviour and properties. - Probe - Probe is the physical tool (i.e., a disturbance, primary solicitation, or a gadget), controlled over time, that generates measurable fields that interact with the sample to acquire information on the specimen’s behaviour and properties. - In dynamic light scattering, temporal fluctuations of backscattered light due to Brownian motion and flow of nanoparticles are the probe, resolved as function of pathlength in the sample. From fluctuation analysis (intensity correlations) and the wavelength of light in the medium, the (distribution of) diffusion coefficient(s) can be measured during flow. The Stokes-Einstein relation yields the particle size characteristics. - In electron microscopy (SEM or TEM), the probe is a beam of electrons with known energy that is focused (and scanned) on the sample’s surface with a well-defined beam-size and scanning algorithm. - In mechanical testing, the probe is a the tip plus a force actuator, which is designed to apply a force over-time on a sample. Many variants can be defined depending on way the force is applied (tensile/compressive uniaxial tests, bending test, indentation test) and its variation with time (static tests, dynamic/cyclic tests, impact tests, etc…) - In spectroscopic methods, the probe is a beam of light with pre-defined energy (for example in the case of laser beam for Raman measurements) or pre-defined polarization (for example in the case of light beam for Spectroscopic Ellipsometry methods), that will be properly focused on the sample’s surface with a welldefined geometry (specific angle of incidence). - In x-ray diffraction, the probe is a beam of x-rays with known energy that is properly focused on the sample’s surface with a well-defined geometry + Method of mechanical testing that provides values for the modulus of elasticity in bending, flexural stress, flexural strain, and the flexural stress–strain response of a material sample + ThreePointFlexuralTest + ThreePointBendingTesting + https://www.wikidata.org/wiki/Q2300905 + Method of mechanical testing that provides values for the modulus of elasticity in bending, flexural stress, flexural strain, and the flexural stress–strain response of a material sample + https://en.wikipedia.org/wiki/Three-point_flexural_test - + - - PotentiometricStrippingAnalysis + + MechanicalTesting - historically for the analysis of metal ions, mercury ions were added to the test solution to form a mercury amalgam when reduced. Alternatively, an HMDE or MFE was used and the oxidizing agent added after amalgam formation. However, the toxicity of mercury and its compounds have all but precluded the present-day use of mercury - the accumulation is similar to that used in stripping voltammetry - the stripping potentiogram shows staircase curves of potential as a function of time. Frequently, the first derivative is displayed (dE/dt=f(t)), as this produces peak-shaped signals. The time between transitions (peaks) is proportional to the concentration of analyte in the test solution - the time between changes in potential in step 2 is related to the concentration of analyte in the solution - two-step electrochemical measurement in which 1) material is accumulated at an electrode and 2) the material is removed by chemical reaction or electrochemically at constant current with measurement of electrode potential - PSA - PotentiometricStrippingAnalysis - two-step electrochemical measurement in which 1) material is accumulated at an electrode and 2) the material is removed by chemical reaction or electrochemically at constant current with measurement of electrode potential + Mechanical testing covers a wide range of tests, which can be divided broadly into two types: +1. those that aim to determine a material's mechanical properties, independent of geometry. +2. those that determine the response of a structure to a given action, e.g. testing of composite beams, aircraft structures to destruction, etc. + MechanicalTesting + Mechanical testing covers a wide range of tests, which can be divided broadly into two types: +1. those that aim to determine a material's mechanical properties, independent of geometry. +2. those that determine the response of a structure to a given action, e.g. testing of composite beams, aircraft structures to destruction, etc. + https://en.wikipedia.org/wiki/Mechanical_testing - + - - - - - - - - - - - - - - - - - - - - Manufacturing - Deals with entities that have a defined shape. - The process of transforming precursor objects (e.g. raw materials) into a product by the use of manual labor, machinery or chemical/biological processes. - DIN 8580:2020 - ISO 15531-1:2004 -manufacturing: function or act of converting or transforming material from raw material or semi-finished state to a state of further completion - ISO 18435-1:2009 -manufacturing process: set of processes in manufacturing involving a flow and/or transformation of material, information, energy, control, or any other element in a manufacturing area - Manufacturing - The process of transforming precursor objects (e.g. raw materials) into a product by the use of manual labor, machinery or chemical/biological processes. - Deals with entities that have a defined shape. - https://de.wikipedia.org/wiki/Fertigungsverfahren + + AdditiveManufacturing + process of joining materials to make parts from 3D model data, usually layer upon layer, as opposed to subtractive manufacturing (3.1.29) and formative manufacturing methodologies, + GenerativeManufacturing + AdditiveManufacturing + process of joining materials to make parts from 3D model data, usually layer upon layer, as opposed to subtractive manufacturing (3.1.29) and formative manufacturing methodologies, - + - - TechnologyProcess - Class that includes the application of scientific knowledge, tools and techniques in order to transform a precursor object (ex. conversion of material) following a practic purpose. - Conversion of materials and assembly of components for the manufacture of products - Technology is the application of knowledge for achieving practical goals in a reproducible way. - Technology refers to methods, systems, and devices which are the result of scientific knowledge being used for practical purposes. - application of scientific knowledge, tools, techniques, crafts or systems in order to solve a problem or to achieve an objective which can result in a product or process - application of scientific knowledge, tools, techniques, crafts, systems or methods of organization in order to solve a problem or achieve an objective - ProductionEngineeringProcess - TechnologyProcess - Class that includes the application of scientific knowledge, tools and techniques in order to transform a precursor object (ex. conversion of material) following a practic purpose. + + FromNotProperShapeToWorkPiece + From Powder, from liquid, from gas + da una forma non propria ad una forma propria + FromNotProperShapeToWorkPiece + From Powder, from liquid, from gas + Powder: +particles that are usually less than 1 mm in size - - + + + + MaterialRelation + A material_relation can e.g. return a predefined number, return a database query, be an equation that depends on other physics_quantities. + An 'equation' that stands for a physical assumption specific to a material, and provides an expression for a 'physics_quantity' (the dependent variable) as function of other variables, physics_quantity or data (independent variables). + MaterialRelation + An 'equation' that stands for a physical assumption specific to a material, and provides an expression for a 'physics_quantity' (the dependent variable) as function of other variables, physics_quantity or data (independent variables). + The Lennard-Jones potential. +A force field. +An Hamiltonian. + + + + + + Grinding + Removal of material by means of rigid or flexible discs or belts containing abrasives. + Schleifen + Grinding + + + + + + UndefinedEdgeCutting + Spanen mit geometrisch unbestimmten Schneiden + UndefinedEdgeCutting + + + + + + + + + + + + + + + + PhysicallyInteractingConvex + PhysicallyInteractingConvex + + + + - T0 L0 M0 I0 Θ-1 N0 J0 + T0 L+2 M0 I+1 Θ0 N0 J0 - PerTemperatureUnit - PerTemperatureUnit + MagneticDipoleMomentUnit + MagneticDipoleMomentUnit - - - + + - + - + - - + + + + + + + + + + + + + + + + + - Fluid - A continuum that has no fixed shape and yields easily to external pressure. - Fluid - A continuum that has no fixed shape and yields easily to external pressure. - Gas, liquid, plasma, + GreenAntiQuark + GreenAntiQuark - - - ContinuumSubstance - A continuum is made of a sufficient number of parts that it continues to exists as continuum individual even after the loss of one of them i.e. a continuum is a redundant. - A state that is a collection of sufficiently large number of other parts such that: -- it is the bearer of qualities that can exists only by the fact that it is a sum of parts -- the smallest partition dV of the state volume in which we are interested in, contains enough parts to be statistically consistent: n [#/m3] x dV [m3] >> 1 - ContinuumSubstance - A state that is a collection of sufficiently large number of other parts such that: -- it is the bearer of qualities that can exists only by the fact that it is a sum of parts -- the smallest partition dV of the state volume in which we are interested in, contains enough parts to be statistically consistent: n [#/m3] x dV [m3] >> 1 - A continuum is made of a sufficient number of parts that it continues to exists as continuum individual even after the loss of one of them i.e. a continuum is a redundant. - A continuum is not necessarily small (i.e. composed by the minimum amount of sates to fulfill the definition). - -A single continuum individual can be the whole fluid in a pipe. - A continuum is the bearer of properties that are generated by the interactions of parts such as viscosity and thermal or electrical conductivity. - - - - - - MergingManufacturing - AddingManufacturing - MergingManufacturing - - - - - - KineticEnergy - The energy of an object due to its motion. - KineticEnergy - http://qudt.org/vocab/quantitykind/KineticEnergy - 4-28.2 - The energy of an object due to its motion. - https://doi.org/10.1351/goldbook.K03402 - - - - + + - - + + - - - Energy - A property of objects which can be transferred to other objects or converted into different forms. - Energy is often defined as "ability of a system to perform work", but it might be misleading since is not necessarily available to do work. - Energy - http://qudt.org/vocab/quantitykind/Energy - 5-20-1 - A property of objects which can be transferred to other objects or converted into different forms. - https://doi.org/10.1351/goldbook.E02101 - - - - - - - - - - - - - - - - - PhysicalConstant - Physical constants are categorised into "exact" and measured constants. - -With "exact" constants, we refer to physical constants that have an exact numerical value after the revision of the SI system that was enforsed May 2019. - PhysicalConstant - Physical constants are categorised into "exact" and measured constants. - -With "exact" constants, we refer to physical constants that have an exact numerical value after the revision of the SI system that was enforsed May 2019. - https://en.wikipedia.org/wiki/List_of_physical_constants - - - - - - + + - - - - - - - - - - - - PhysicalQuantity - A 'Mathematical' entity that is made of a 'Numeral' and a 'MeasurementUnit' defined by a physical law, connected to a physical entity through a model perspective. Measurement is done according to the same model. - In the same system of quantities, dim ρB = ML−3 is the quantity dimension of mass concentration of component B, and ML−3 is also the quantity dimension of mass density, ρ. -ISO 80000-1 - Measured or simulated 'physical propertiy'-s are always defined by a physical law, connected to a physical entity through a model perspective and measurement is done according to the same model. - -Systems of units suggests that this is the correct approach, since except for the fundamental units (length, time, charge) every other unit is derived by mathematical relations between these fundamental units, implying a physical laws or definitions. - Measurement units of quantities of the same quantity dimension may be designated by the same name and symbol even when the quantities are not of the same kind. - -For example, joule per kelvin and J/K are respectively the name and symbol of both a measurement unit of heat capacity and a measurement unit of entropy, which are generally not considered to be quantities of the same kind. - -However, in some cases special measurement unit names are restricted to be used with quantities of specific kind only. + + + + + + + + + Determination + A 'Semiosis' that involves an 'Observer' that perceives another 'Physical' (the 'Object') through a specific perception mechanism and produces a 'Property' (the 'Sign') that stands for the result of that particular perception according to a well defined conventional procedure. + Characterisation + Determination + A 'Semiosis' that involves an 'Observer' that perceives another 'Physical' (the 'Object') through a specific perception mechanism and produces a 'Property' (the 'Sign') that stands for the result of that particular perception according to a well defined conventional procedure. + Assigning the word "red" as sign for an object provides an information to all other interpreters about the outcome of a specific observation procedure according to the determiner. + -For example, the measurement unit ‘second to the power minus one’ (1/s) is called hertz (Hz) when used for frequencies and becquerel (Bq) when used for activities of radionuclides. + + + + + HartreeEnergy + Energy of the electron in a hydrogen atom in its ground state + HartreeEnergy + https://qudt.org/vocab/unit/E_h.html + https://www.wikidata.org/wiki/Q476572 + https://dbpedia.org/page/Hartree + 10-8 + Energy of the electron in a hydrogen atom in its ground state + https://en.wikipedia.org/wiki/Hartree + https://doi.org/10.1351/goldbook.H02748 + -As another example, the joule (J) is used as a unit of energy, but never as a unit of moment of force, i.e. the newton metre (N · m). - — quantities of the same kind have the same quantity dimension, -— quantities of different quantity dimensions are always of different kinds, and -— quantities having the same quantity dimension are not necessarily of the same kind. -ISO 80000-1 - PhysicalQuantity - A 'Mathematical' entity that is made of a 'Numeral' and a 'MeasurementUnit' defined by a physical law, connected to a physical entity through a model perspective. Measurement is done according to the same model. + + + + UserCase + High level description of the user case. It can include the properties of the material, the conditions of the environment and possibly mentioning which are the industrial sectors of reference. + UserCase + High level description of the user case. It can include the properties of the material, the conditions of the environment and possibly mentioning which are the industrial sectors of reference. - - - - - SolidSol - A type of sol in the form of one solid dispersed in another continuous solid. - SolidSol - A type of sol in the form of one solid dispersed in another continuous solid. + + + + AbrasiveStrippingVoltammetry + + electrochemical method where traces of solid particles are abrasively transferred onto the surface of an electrode, followed by an electrochemical dissolution (anodic or cathodic dissolution) that is recorded as a current–voltage curve + AbrasiveStrippingVoltammetry + electrochemical method where traces of solid particles are abrasively transferred onto the surface of an electrode, followed by an electrochemical dissolution (anodic or cathodic dissolution) that is recorded as a current–voltage curve - - - - Sol - A colloid in which small particles (1 nm to 100 nm) are suspended in a continuum phase. - Sol - A colloid in which small particles (1 nm to 100 nm) are suspended in a continuum phase. + + + + + + + + + + + AtomicAttenuationCoefficient + Quotient of the linear attenuation coefficient µ and the number density, n, of atoms in the substance. + AtomicAttenuationCoefficient + https://www.wikidata.org/wiki/Q98592911 + 10-52 + Quotient of the linear attenuation coefficient µ and the number density, n, of atoms in the substance. - - - - Solid - A continuum characterized by structural rigidity and resistance to changes of shape or volume, that retains its shape and density when not confined. - Solid - A continuum characterized by structural rigidity and resistance to changes of shape or volume, that retains its shape and density when not confined. + + + + + GFactorOfNucleusOrNuclearParticle + Quotient of the magnetic dipole moment of an atom, and the product of the nuclear spin quantum number and the nuclear magneton. + NuclearGFactor + GFactorOfNucleusOrNuclearParticle + https://qudt.org/vocab/quantitykind/GFactorOfNucleus + https://www.wikidata.org/wiki/Q97591250 + 10-14.2 + Quotient of the magnetic dipole moment of an atom, and the product of the nuclear spin quantum number and the nuclear magneton. - + - - Porosity - Ratio of void volume and total volume of a porous material. - Porosity - https://www.wikidata.org/wiki/Q622669 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=801-31-32 - Ratio of void volume and total volume of a porous material. - https://doi.org/10.1351/goldbook.P04762 + + + GFactor + Relation between observed magnetic moment of a particle and the related unit of magnetic moment. + GFactor + https://www.wikidata.org/wiki/Q1951266 + Relation between observed magnetic moment of a particle and the related unit of magnetic moment. - + - + - - - ElectricCurrent - A flow of electric charge. - ElectricCurrent - http://qudt.org/vocab/quantitykind/ElectricCurrent - 6-1 - A flow of electric charge. - https://doi.org/10.1351/goldbook.E01927 - - - - - - - - ScientificTheory - A scientific theory is a description, objective and observed, produced with scientific methodology. - ScientificTheory - A scientific theory is a description, objective and observed, produced with scientific methodology. + + + ThermalResistance + The name “thermal resistance” and the symbol R are used in building technology to designate thermal insulance. + Thermodynamic temperature difference divided by heat flow rate. + ThermalResistance + https://qudt.org/vocab/quantitykind/ThermalResistance + https://www.wikidata.org/wiki/Q899628 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-45 + 5-12 + Thermodynamic temperature difference divided by heat flow rate. - - - Observed - Observed - The biography of a person met by the author. - - - - - Objective - A coded conventional that is determined by each interpeter following a well defined determination procedure through a specific perception channel. - The word objective does not mean that each observation will provide the same results. It means that the observation followed a well defined procedure. - -This class refers to what is commonly known as physical property, i.e. a measurable property of physical system, whether is quantifiable or not. - Objective - A coded conventional that is determined by each interpeter following a well defined determination procedure through a specific perception channel. - - - - - - Theory - A 'conventional' that stand for a 'physical'. - The 'theory' is e.g. a proposition, a book or a paper whose sub-symbols suggest in the mind of the interpreter an interpretant structure that can represent a 'physical'. - -It is not an 'icon' (like a math equation), because it has no common resemblance or logical structure with the 'physical'. - -In Peirce semiotics: legisign-symbol-argument - Theory - A 'conventional' that stand for a 'physical'. - - - - - - - - - - - Tessellation - A causal object that is tessellated in direct parts. - A tessellation (or tiling) is the covering of a surface, often a plane, using one or more geometric shapes, called tiles, with no overlaps and no gaps. - Tiling - Tessellation - A tessellation (or tiling) is the covering of a surface, often a plane, using one or more geometric shapes, called tiles, with no overlaps and no gaps. - A causal object that is tessellated in direct parts. - - - - - - - EndStep - The final step of a workflow. - There may be more than one end task, if they run in parallel leading to more than one output. - EndStep - The final step of a workflow. - There may be more than one end task, if they run in parallel leading to more than one output. - - - - - - SquareWaveVoltammetry - - Most instruments show plots of the current at the end of the forward-going pulse and of the backward-going pulse vs. the potential, as well as their difference. This can give valuable information on the kinetics of the electrode reaction and the electrode process. - The current is sampled just before the end of the forward- going pulse and of the backward-going pulse and the difference of the two sampled currents is plotted versus the applied potential of the potential or staircase ramp. The square-wave voltammogram is peak-shaped - The sensitivity of SWV depends on the reversibility of the electrode reaction of the analyte. - voltammetry in which a square-wave potential waveform is superimposed on an underlying linearly varying potential ramp or staircase ramp - OSWV - OsteryoungSquareWaveVoltammetry - SWV - SquareWaveVoltammetry - https://www.wikidata.org/wiki/Q4016323 - voltammetry in which a square-wave potential waveform is superimposed on an underlying linearly varying potential ramp or staircase ramp - https://en.wikipedia.org/wiki/Squarewave_voltammetry - https://doi.org/10.1515/pac-2018-0109 - - - - - - - - - - - - IntentionalProcess - A process occurring with the active participation of an agent that drives the process according to a specific objective (intention). - Project - IntentionalProcess - A process occurring with the active participation of an agent that drives the process according to a specific objective (intention). - - - - - - Duration - Physical quantity for describing the temporal distance between events. - Duration - https://www.wikidata.org/wiki/Q2199864 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-01-13 - 3-9 - Physical quantity for describing the temporal distance between events. - - - - - - - - - - - - - - - Property - A coded that makes use of an atomic symbol with respect to the code used to refer to the interaction. - A property is atomic in the sense that is aimed to deliver one and one only aspect of the object according to one code, such as the color with one sign (e.g., black) or a quantitiative property (e.g., 1.4 kg). - Property - A coded that makes use of an atomic symbol with respect to the code used to refer to the interaction. - Hardness is a subclass of properties. -Vickers hardness is a subclass of hardness that involves the procedures and instruments defined by the standard hardness test. - The name "red" which is atomic in the code made of the list of colors. - A property is atomic in the sense that is aimed to deliver one and one only aspect of the object according to one code, such as the color with one sign (e.g., black) or a quantitiative property (e.g., 1.4 kg). - - - - - - - SerialWorkflow - A workflow whose tasks are tiles of a sequence. - SerialWorkflow - A workflow whose tasks are tiles of a sequence. - - - - - - Sequence - A tessellation of temporal slices. - Sequence - A tessellation of temporal slices. - - - - - - OrbitalAngularMomentumQuantumNumber - Atomic quantum number related to the orbital angular momentum l of a one-electron state. - OrbitalAngularMomentumQuantumNumber - https://qudt.org/vocab/quantitykind/OrbitalAngularMomentumQuantumNumber - https://www.wikidata.org/wiki/Q1916324 - 10-13.3 - Atomic quantum number related to the orbital angular momentum l of a one-electron state. - - - - - - - QuantumNumber - Number describing a particular state of a quantum system. - QuantumNumber - https://qudt.org/vocab/quantitykind/QuantumNumber - https://www.wikidata.org/wiki/Q232431 - 10-13.1 - Number describing a particular state of a quantum system. - - - - - - - PowerFactor - Under periodic conditions, ratio of the absolute value of the active power P to the apparent power S. - PowerFactor - https://qudt.org/vocab/quantitykind/PowerFactor - https://www.wikidata.org/wiki/Q750454 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-11-46 - 6-58 - Under periodic conditions, ratio of the absolute value of the active power P to the apparent power S. - - - - - - - IonizationEnergy - Difference between energy of an electron at rest at infinity and a certain energy level which is the energy of an electron in the interior of a substance. - IonizationEnergy - https://qudt.org/vocab/quantitykind/IonizationEnergy - https://www.wikidata.org/wiki/Q483769 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-06-39 - 12-24.2 - Difference between energy of an electron at rest at infinity and a certain energy level which is the energy of an electron in the interior of a substance. - https://doi.org/10.1351/goldbook.I03199 - - - - - - - ActiveEnergy - The integral over a time interval of the instantaneous power. - ActiveEnergy - https://qudt.org/vocab/quantitykind/ActiveEnergy - https://www.wikidata.org/wiki/Q79813678 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=601-01-19 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-11-57 - 6-62 - The integral over a time interval of the instantaneous power. - - - - - - - - - - - - - - Product - The overall lifetime of an holistic that has been the output of an intentional process. - This concepts encompass the overall lifetime of a product. -Is temporaly fundamental, meaning that it can have other products as holistic spatial parts, but its holistic temporal parts are not products. In other words, the individual must encompass the whole lifetime from creation to disposal. -A product can be a tangible object (e.g. a manufactured object), a process (e.g. service). It can be the outcome of a natural or an artificially driven process. -It must have and initial stage of its life that is also an outcome of a intentional process. - Output - Product - https://www.iso.org/obp/ui/#iso:std:iso:9000:ed-3:v1:en:term:3.4.2 - https://www.iso.org/obp/ui/#iso:std:iso:14040:ed-2:v1:en:term:3.9 - The overall lifetime of an holistic that has been the output of an intentional process. - This concepts encompass the overall lifetime of a product. -Is temporaly fundamental, meaning that it can have other products as holistic spatial parts, but its holistic temporal parts are not products. In other words, the individual must encompass the whole lifetime from creation to disposal. -A product can be a tangible object (e.g. a manufactured object), a process (e.g. service). It can be the outcome of a natural or an artificially driven process. -It must have and initial stage of its life that is also an outcome of a intentional process. - - - - - - - InternalConversionFactor - Quotient of the number of internal conversion electrons and the number of gamma quanta emitted by the radioactive atom in a given transition, where a conversion electron represents an orbital electron emitted through the radioactive decay. - InternalConversionCoefficient - InternalConversionFactor - https://qudt.org/vocab/quantitykind/InternalConversionFactor - https://www.wikidata.org/wiki/Q6047819 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-02-57 - 10-35 - Quotient of the number of internal conversion electrons and the number of gamma quanta emitted by the radioactive atom in a given transition, where a conversion electron represents an orbital electron emitted through the radioactive decay. - - - - - - - - - - - - MagneticMoment - A vector quantity equal to the product of the current, the loop area, and the unit vector normal to the loop plane, the direction of which corresponds to the loop orientation - MagneticAreaMoment - MagneticMoment - https://qudt.org/vocab/quantitykind/MagneticMoment - https://www.wikidata.org/wiki/Q242657 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-49 - 6-23 - A vector quantity equal to the product of the current, the loop area, and the unit vector normal to the loop plane, the direction of which corresponds to the loop orientation - https://doi.org/10.1351/goldbook.M03688 - - - - - - - - - - - - - - AmountConcentration - The amount of a constituent divided by the volume of the mixture. - Concentration - MolarConcentration - Molarity - AmountConcentration - http://qudt.org/vocab/quantitykind/AmountOfSubstanceConcentrationOfB - https://doi.org/10.1351/goldbook.A00295 - - - - - - - - - - - - - - - - Step - A step is part of a specific granularity level for the workflow description, as composition of tasks. - A task that is a well formed tile of a workflow, according to a reductionistic description. - Step - A task that is a well formed tile of a workflow, according to a reductionistic description. - A step is part of a specific granularity level for the workflow description, as composition of tasks. - - - - - - - - - - - - - - - Tile - A causal object that is direct part of a tessellation. - Tile - A causal object that is direct part of a tessellation. - - - - - - - MixingRatio - Ratio of the mass of water vapour to the mass of dry air in a given volume of air. - The mixing ratio at saturation is denoted xsat. - MassRatioOfWaterVapourToDryGas - MixingRatio - https://www.wikidata.org/wiki/Q76378940 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-62 - 5-30 - Ratio of the mass of water vapour to the mass of dry air in a given volume of air. - - - - - - DielectricAndImpedanceSpectroscopy - - Dielectric spectroscopy (DS) or impedance spectroscopy, also known as electrochemical impedance spectroscopy, is frequently used to study the response of a sample subjected to an applied electric field of fixed or changing frequency. DS describes the dielectric properties of a material as a function of frequency. In DS, the radio and microwave frequency regions of the electromagnetic spectrum have been successfully made to interact with materials, so as to study the behavior of molecules. The interaction of applied alternating electric fields with dipoles possessing reorientation mobility in materials is also dealt by DS. - DielectricAndImpedanceSpectroscopy - Dielectric spectroscopy (DS) or impedance spectroscopy, also known as electrochemical impedance spectroscopy, is frequently used to study the response of a sample subjected to an applied electric field of fixed or changing frequency. DS describes the dielectric properties of a material as a function of frequency. In DS, the radio and microwave frequency regions of the electromagnetic spectrum have been successfully made to interact with materials, so as to study the behavior of molecules. The interaction of applied alternating electric fields with dipoles possessing reorientation mobility in materials is also dealt by DS. - - - - - - Spectroscopy - - Spectroscopy is a category of characterization techniques which use a range of principles to reveal the chemical composition, composition variation, crystal structure and photoelectric properties of materials. - Spectroscopy - Spectroscopy is a category of characterization techniques which use a range of principles to reveal the chemical composition, composition variation, crystal structure and photoelectric properties of materials. - - - - - - PhysicalPhenomenon - A 'process' that is recognized by physical sciences and is categorized accordingly. - While every 'process' in the EMMO involves physical objects, this class is devoted to represent real world objects that express a phenomenon relevant for the ontologist - PhysicalPhenomenon - A 'process' that is recognized by physical sciences and is categorized accordingly. - - - - - - FiberboardManufacturing - FiberboardManufacturing - - - - - - FormingFromChip - FormingFromChip - - - - - - PhysicsBasedSimulation - A simulation that relies on physics based models, according to the Review of Materials Modelling and CWA 17284:2018. - CEN Workshop Agreement – CWA 17284 “Materials modelling – terminology, classification and metadata” - PhysicsBasedSimulation - A simulation that relies on physics based models, according to the Review of Materials Modelling and CWA 17284:2018. - - - - - - - - - - - - - - Sign - A 'Sign' can have temporal-direct-parts which are 'Sign' themselves. - -A 'Sign' usually havs 'sign' spatial direct parts only up to a certain elementary semiotic level, in which the part is only a 'Physical' and no more a 'Sign' (i.e. it stands for nothing). This elementary semiotic level is peculiar to each particular system of signs (e.g. text, painting). - -Just like an 'Elementary' in the 'Physical' branch, each 'Sign' branch should have an a-tomistic mereological part. - According to Peirce, 'Sign' includes three subcategories: -- symbols: that stand for an object through convention -- indeces: that stand for an object due to causal continguity -- icons: that stand for an object due to similitudes e.g. in shape or composition - An 'Physical' that is used as sign ("semeion" in greek) that stands for another 'Physical' through an semiotic process. - Sign - An 'Physical' that is used as sign ("semeion" in greek) that stands for another 'Physical' through an semiotic process. - A novel is made of chapters, paragraphs, sentences, words and characters (in a direct parthood mereological hierarchy). - -Each of them are 'sign'-s. - -A character can be the a-tomistic 'sign' for the class of texts. - -The horizontal segment in the character "A" is direct part of "A" but it is not a 'sign' itself. - -For plain text we can propose the ASCII symbols, for math the fundamental math symbols. - - - - - - - - - - - - - ExposureRate - Time derivative of exposure. - ExposureRate - https://qudt.org/vocab/quantitykind/ExposureRate - https://www.wikidata.org/wiki/Q99720212 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-42 - 10-89 - Time derivative of exposure. - - - - - SpatiallyRedundant - A whole with spatial parts of its same type. - SpatiallyRedundant - A whole with spatial parts of its same type. - - - - - - DifferentialLinearPulseVoltammetry - - Differential Pulse Voltammetry in which small potential pulses are superimposed onto a linearly varying potential. - DifferentialLinearPulseVoltammetry - Differential Pulse Voltammetry in which small potential pulses are superimposed onto a linearly varying potential. - - - - - - DifferentialPulseVoltammetry - - Differential pulse polarography is differential pulse voltammetry in which a dropping mercury electrode is used as the working electrode. A pulse is applied before the mechani- cally enforced end of the drop and the current is sampled twice: just before the onset of the pulse and just before its end. The pulse width is usually 10 to 20 % of the drop life. The drop dislodgement is synchronized with current sampling, which is carried out as in DPV. - The ratio of faradaic current to charging current is enhanced and the negative influence of charging current is partially eliminated in the same way as in normal pulse voltammetry (NPV). Moreover, subtraction of the charging current sampled before the application of the pulse further decreases its negative influence. Due to the more enhanced signal (faradaic current) to noise (charging current) ratio, the limit of detection is lower than with NPV. - The sensitivity of DPV depends on the reversibility of the electrode reaction of the analyte. - voltammetry in which small potential pulses (constant height 10 to 100 mV, constant width 10 to 100 ms) are superimposed onto a linearly varying potential or onto a staircase potential ramp. The current is sampled just before the onset of the pulse (e.g. 10 to 20 ms) and for the same sampling time just before the end of the pulse. The difference between the two sampled currents is plotted versus the potential applied before the pulse. Thus, a differential pulse voltammogram is peak-shaped - DPV - DifferentialPulseVoltammetry - https://www.wikidata.org/wiki/Q5275361 - voltammetry in which small potential pulses (constant height 10 to 100 mV, constant width 10 to 100 ms) are superimposed onto a linearly varying potential or onto a staircase potential ramp. The current is sampled just before the onset of the pulse (e.g. 10 to 20 ms) and for the same sampling time just before the end of the pulse. The difference between the two sampled currents is plotted versus the potential applied before the pulse. Thus, a differential pulse voltammogram is peak-shaped - https://en.wikipedia.org/wiki/Differential_pulse_voltammetry - https://doi.org/10.1515/pac-2018-0109 - - - - - - - - - - - - Theorisation - The 'semiosis' process of interpreting a 'physical' and provide a complec sign, 'theory' that stands for it and explain it to another interpreter. - Theorization - Theorisation - The 'semiosis' process of interpreting a 'physical' and provide a complec sign, 'theory' that stands for it and explain it to another interpreter. - - - - - - - - - - - - - - - - - - - - - - - - - Determination - A 'Semiosis' that involves an 'Observer' that perceives another 'Physical' (the 'Object') through a specific perception mechanism and produces a 'Property' (the 'Sign') that stands for the result of that particular perception according to a well defined conventional procedure. - Characterisation - Determination - A 'Semiosis' that involves an 'Observer' that perceives another 'Physical' (the 'Object') through a specific perception mechanism and produces a 'Property' (the 'Sign') that stands for the result of that particular perception according to a well defined conventional procedure. - Assigning the word "red" as sign for an object provides an information to all other interpreters about the outcome of a specific observation procedure according to the determiner. - - - - - - PhysicsEquationSolution - A function solution of a physics equation that provides a methods for the prediction of some quantitiative properties of an object. - This must be a mathematical function v(t), x(t). -A dataset as solution is a conventional sign. - PhysicsEquationSolution - A function solution of a physics equation that provides a methods for the prediction of some quantitiative properties of an object. - A parabolic function is a prediction of the trajectory of a falling object in a gravitational field. While it has predictive capabilities it lacks of an analogical character, since it does not show the law behind that trajectory. - - - - - ElementaryBoson - ElementaryBoson - - - - - - WorkPiece - A WorkPiece is physical artifact, that has a proper shape and occupyes a proper volume intended for subsequent transformation. It is a condensed state, so it is a compact body that is processed or has to be processed. - A solid is defined as a portion of matter that is in a condensed state characterised by resistance to deformation and volume changes. - In manufacturing, a workpiece is a single, delimited part of largely solid material that is processed in some form (e.g. stone ). - In physics, a rigid body (also known as a rigid object[2]) is a solid body in which deformation is zero or so small it can be neglected. The distance between any two given points on a rigid body remains constant in time regardless of external forces or moments exerted on it. A rigid body is usually considered as a continuous distribution of mass. - It has a shape, so we conclude that it is solid - Object that is processed with a machine - Seems to have to be processed through mechanical deformation. So it takes part of a manufacturing process. It is a Manufactured Product and it can be a Commercial Product - The raw material or partially finished piece that is shaped by performing various operations. - They are not powders or threads - a physical artifact, real or virtual, intended for subsequent transformation within some manufacturing operation - fili e polveri non sono compresi - it seems to be an intermediate product, that has to reach the final shape. - it seems to be solid, so it has a proper shape - powder is not workpiece because it has the shape of the recipient containing them - Werkstück - WorkPiece - A WorkPiece is physical artifact, that has a proper shape and occupyes a proper volume intended for subsequent transformation. It is a condensed state, so it is a compact body that is processed or has to be processed. - - - - - - - - - - - - - ManufacturedMaterial - A material that is obtained through a manufacturing process. - EngineeredMaterial - ProcessedMaterial - ManufacturedMaterial - A material that is obtained through a manufacturing process. - - - - - - - - - T0 L0 M+1 I0 Θ0 N0 J0 - - - MassUnit - MassUnit - - - - - - ElectricReactance - The imaginary part of the impedance. - The opposition of a circuit element to a change in current or voltage, due to that element's inductance or capacitance. - Reactance - ElectricReactance - http://qudt.org/vocab/quantitykind/Reactance - https://www.wikidata.org/wiki/Q193972 - 6-51.3 - The imaginary part of the impedance. - https://en.wikipedia.org/wiki/Electrical_reactance - https://doi.org/10.1351/goldbook.R05162 - - - - - - - - - - - - - ElectricResistance - Inverse of 'ElectricalConductance'. - Measure of the difficulty to pass an electric current through a material. - Resistance - ElectricResistance - http://qudt.org/vocab/quantitykind/Resistance - https://www.wikidata.org/wiki/Q25358 - 6-46 - Measure of the difficulty to pass an electric current through a material. - https://doi.org/10.1351/goldbook.E01936 - - - - - - - - - - - - - - SpecificHeatCapacity - Heat capacity divided by mass. - SpecificHeatCapacity - https://qudt.org/vocab/quantitykind/SpecificHeatCapacity - https://www.wikidata.org/wiki/Q487756 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-48 - https://dbpedia.org/page/Specific_heat_capacity - 5-16.1 - Heat capacity divided by mass. - https://en.wikipedia.org/wiki/Specific_heat_capacity - https://doi.org/10.1351/goldbook.S05800 - - - - - - RapidPrototyping - Application of additive manufacturing intended for reducing the time needed for producing prototypes. - RapidPrototyping - Application of additive manufacturing intended for reducing the time needed for producing prototypes. - - - - - - AdditiveManufacturing - process of joining materials to make parts from 3D model data, usually layer upon layer, as opposed to subtractive manufacturing (3.1.29) and formative manufacturing methodologies, - GenerativeManufacturing - AdditiveManufacturing - process of joining materials to make parts from 3D model data, usually layer upon layer, as opposed to subtractive manufacturing (3.1.29) and formative manufacturing methodologies, - - - - - - - - - T0 L+1 M0 I0 Θ-1 N0 J0 - - - LengthPerTemperatureUnit - LengthPerTemperatureUnit - - - - - - - - - - - MixedTiling - A well formed tessellation with at least a junction tile. - MixedTiling - A well formed tessellation with at least a junction tile. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - EncodedData - A causal object whose properties variation are encoded by an agent and that can be decoded by another agent according to a specific rule. - Variations in data are generated by an agent (not necessarily human) and are intended to be decoded by the same or another agent using the same encoding rules. -Data are always generated by an agent but not necessarily possess a semantic meaninig, either because it's lost or unknown or because simply they possess none (e.g. a random generation of symbols). -A data object may be used as the physical basis for a sign, under Semiotics perspective. - We call "decoding" the act of recognise the variation according to a particular rule and generate another equivalent schema (e.g. in the agent's cognitive apparatus, as another form of data). -We call "interpreting" the act of providing semantic meaning to data, which is covered by the semiotic perspective. - EncodedVariation - EncodedData - A causal object whose properties variation are encoded by an agent and that can be decoded by another agent according to a specific rule. - A Radio Morse Code transmission can be addressed by combination of perspectives. - -Physicalistic: the electromagnetic pulses can be defined as individual A (of type Field) and the strip of paper coming out a printer receiver can be defined as individual B (of type Matter). -Data: both A and B are also DiscreteData class individuals. In particular they may belong to a MorseData class, subclass of DiscreteData. -Perceptual: B is an individual belonging to the graphical entities expressing symbols. In particular is a formula under the MorseLanguage class, made of a combination of . and - symbols. -Semiotics: A and B can be signs if they refers to something else (e.g. a report about a fact, names). - A signal through a cable. A sound wave. Words on a page. The pattern of excited states within a computer RAM. - We call "decoding" the act of recognise the variation according to a particular rule and generate another equivalent schema (e.g. in the agent's cognitive apparatus, as another form of data). -We call "interpreting" the act of providing semantic meaning to data, which is covered by the semiotic perspective. - https://no.wikipedia.org/wiki/Data - - - - - - Symbol - Subclasses of 'Symbol' are alphabets, in formal languages terminology. A 'Symbol' is atomic for that alphabet, i.e. it has no parts that are symbols for the same alphabet. -e.g. a math symbol is not made of other math symbols -A Symbol may be a String in another language. -e.g. "Bq" is the symbol for Becquerel units when dealing with metrology, or a string of "B" and "q" symbols when dealing with characters. - The class of individuals that stand for an elementary mark of a specific symbolic code (alphabet). - AlphabeticEntity - Symbol - The class of individuals that stand for an elementary mark of a specific symbolic code (alphabet). - The class of letter "A" is the symbol as idea and the letter A that you see on the screen is the mark that can be represented by an individual belonging to "A". - Subclasses of 'Symbol' are alphabets, in formal languages terminology. A 'Symbol' is atomic for that alphabet, i.e. it has no parts that are symbols for the same alphabet. -e.g. a math symbol is not made of other math symbols -A Symbol may be a String in another language. -e.g. "Bq" is the symbol for Becquerel units when dealing with metrology, or a string of "B" and "q" symbols when dealing with characters. - Symbols of a formal language need not be symbols of anything. For instance there are logical constants which do not refer to any idea, but rather serve as a form of punctuation in the language (e.g. parentheses). - -Symbols of a formal language must be capable of being specified without any reference to any interpretation of them. -(Wikipedia) - The class is the idea of the symbol, while the individual of that class stands for a specific mark (or token) of that idea. - - - - - - ComputerLanguage - A formal language used to communicate with a computer. - The categorisation of computer languages is based on - -Guide to the Software Engineering Body of Knowledge (SWEBOK(R)): Version 3.0, January 2014. Editors Pierre Bourque, Richard E. Fairley. Publisher: IEEE Computer Society PressWashingtonDCUnited States. ISBN:978-0-7695-5166-1. -https://www.computer.org/education/bodies-of-knowledge/software-engineering - ComputerLanguage - A formal language used to communicate with a computer. - The categorisation of computer languages is based on - -Guide to the Software Engineering Body of Knowledge (SWEBOK(R)): Version 3.0, January 2014. Editors Pierre Bourque, Richard E. Fairley. Publisher: IEEE Computer Society PressWashingtonDCUnited States. ISBN:978-0-7695-5166-1. -https://www.computer.org/education/bodies-of-knowledge/software-engineering - https://en.wikipedia.org/wiki/Computer_language - - - - - - ComputerScience - A well-formed formula in computer science may be or not be interpreted by a computer. For example pseudo-code is only intended for human consumption. - A well-formed formula that follows the syntactic rules of computer science. - ComputerScience - A well-formed formula that follows the syntactic rules of computer science. - A well-formed formula in computer science may be or not be interpreted by a computer. For example pseudo-code is only intended for human consumption. - - - - - Deduced - A semantic object that is connected to an index sign by an interpreter (a deducer) by causal cogiguity. - Deduced - A semantic object that is connected to an index sign by an interpreter (a deducer) by causal cogiguity. - - - - - - - - - - - - - - - Index - A 'Sign' that stands for an 'Object' due to causal continguity. - Signal - Index - A 'Sign' that stands for an 'Object' due to causal continguity. - Smoke stands for a combustion process (a fire). -My facial expression stands for my emotional status. - - - - - - - SuperconductorEnergyGap - Width of the forbidden energy band in a superconductor. - SuperconductorEnergyGap - https://qudt.org/vocab/quantitykind/SuperconductorEnergyGap - https://www.wikidata.org/wiki/Q106127898 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=815-10-28 - 12-37 - Width of the forbidden energy band in a superconductor. - - - - - - - GapEnergy - Smallest energy difference between the lowest level of conduction band and the highest level of valence band at zero thermodynamic temperature. - BandgapEnergy - GapEnergy - https://www.wikidata.org/wiki/Q103982939 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-06-16 - 12-27.2 - Smallest energy difference between the lowest level of conduction band and the highest level of valence band at zero thermodynamic temperature. - https://doi.org/10.1351/goldbook.B00593 - - - - - - - AmountFraction - The amount of a constituent divided by the total amount of all constituents in a mixture. - MoleFraction - AmountFraction - http://qudt.org/vocab/quantitykind/MoleFraction - The amount of a constituent divided by the total amount of all constituents in a mixture. - https://doi.org/10.1351/goldbook.A00296 - - - - - - - - - - - - - - - - - - - - - - - - - - - CausalSystem - A causal system provides the most general concept of system, being a union of causal structures interacting together. In its most simple form, a causal system is an interlacement of causal paths (the most simple structure type). - A non-path causal structure - CausalSystem - A causal system provides the most general concept of system, being a union of causal structures interacting together. In its most simple form, a causal system is an interlacement of causal paths (the most simple structure type). - A non-path causal structure - A electron binded by a nucleus. - - - - - - - - - - - - - EnergyFluence - In nuclear physics, incident radiant energy per cross-sectional area. - EnergyFluence - https://qudt.org/vocab/quantitykind/EnergyFluence - https://www.wikidata.org/wiki/Q98538612 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-17 - 10-46 - In nuclear physics, incident radiant energy per cross-sectional area. - - - - - - - RatioOfSpecificHeatCapacities - Ratio of specific heat capacity at constant pressure cp to specific heat capacity at constant volume cV, thus γ = cp/cV. - RatioOfSpecificHeatCapacities - https://qudt.org/vocab/quantitykind/HeatCapacityRatio - https://www.wikidata.org/wiki/Q503869 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-51 - 5-17.1 - Ratio of specific heat capacity at constant pressure cp to specific heat capacity at constant volume cV, thus γ = cp/cV. - - - - - - - - - T-2 L-1 M+1 I0 Θ-1 N0 J0 - - - PressurePerTemperatureUnit - PressurePerTemperatureUnit - - - - - - - MassConcentrationOfWater - Quotient of the mass of water in a three-dimensional domain, irrespective of the form of aggregation, by the volume of the domain. - The mass concentration of water at saturation is denoted wsat. - MassConcentrationOfWater - https://qudt.org/vocab/quantitykind/MassConcentrationOfWater - https://www.wikidata.org/wiki/Q76378758 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-59 - 5-27 - Quotient of the mass of water in a three-dimensional domain, irrespective of the form of aggregation, by the volume of the domain. - - - - - - - MassConcentration - Mass of a constituent divided by the volume of the mixture. - MassConcentration - http://qudt.org/vocab/quantitykind/MassConcentration - https://doi.org/10.1351/goldbook.M03713 - - - - - MesoscopicModel - A physics-based model based on a physics equation describing the behaviour of mesoscopic entities, i.e. a set of bounded atoms like a molecule, bead or nanoparticle. - MesoscopicModel - A physics-based model based on a physics equation describing the behaviour of mesoscopic entities, i.e. a set of bounded atoms like a molecule, bead or nanoparticle. - - - - - TemporalRole - An holistic temporal part of a whole. - HolisticTemporalPart - TemporalRole - An holistic temporal part of a whole. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Suspension - An heterogeneous mixture that contains coarsly dispersed particles (no Tyndall effect), that generally tend to separate in time to the dispersion medium phase. - Suspensions show no significant effect on light. - Suspension - An heterogeneous mixture that contains coarsly dispersed particles (no Tyndall effect), that generally tend to separate in time to the dispersion medium phase. - - - - - - - - - - - - PhaseHeterogeneousMixture - A mixture in which more than one phases of matter cohexists. - Phase heterogenous mixture may share the same state of matter. - -For example, immiscibile liquid phases (e.g. oil and water) constitute a mixture whose phases are clearly separated but share the same state of matter. - PhaseHeterogeneousMixture - A mixture in which more than one phases of matter cohexists. - Phase heterogenous mixture may share the same state of matter. - -For example, immiscibile liquid phases (e.g. oil and water) constitute a mixture whose phases are clearly separated but share the same state of matter. - - - - - - - - - T0 L-3 M+1 I0 Θ0 N0 J0 - - - DensityUnit - DensityUnit - - - - - - - - - - - - - - Reductionistic - A class devoted to categorize causal objects by specifying their granularity levels. - A granularity level is specified by a tiling decomposition of the whole y. A tiling is identified as a set of items {x1, x2, ... xn} called tiles that: - - are proper parts of y - - covers the entire whole (y = x1 +x2 + ... + xn) - - do not overlap - - are part of one, and one only, whole (inverse functional) - Reductionistic - A class devoted to categorize causal objects by specifying their granularity levels. - A granularity level is specified by a tiling decomposition of the whole y. A tiling is identified as a set of items {x1, x2, ... xn} called tiles that: - - are proper parts of y - - covers the entire whole (y = x1 +x2 + ... + xn) - - do not overlap - - are part of one, and one only, whole (inverse functional) - Direct parthood is the antitransitive parthood relation used to build the class hierarchy (and the granularity hierarchy) for this perspective. - - - - - - - NeelTemperature - Critical thermodynamic temperature of an antiferromagnet. - NeelTemperature - https://www.wikidata.org/wiki/Q830311 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-12-52 - 12-35.2 - Critical thermodynamic temperature of an antiferromagnet. - - - - - - CriticalTemperature - Temperature below which quantum effects dominate. - CriticalTemperature - https://www.wikidata.org/wiki/Q1450516 - Temperature below which quantum effects dominate. - - - - - - InteractionVolume - - In some cases, (like tribological characterisations) the “sample” can also be the “probe”. When analysing a system of samples that interact each other, finding a clear definition can become a complex problem. - The volume of material, and the surrounding environment, that interacts with the probe and generate a detectable (measurable) signal (information). - InteractionVolume - The volume of material, and the surrounding environment, that interacts with the probe and generate a detectable (measurable) signal (information). - In Scanning Electron Microscopy (SEM), the interaction volume is the volume of material that interacts directly with the incident electron beam, is usually much smaller than the entire specimen’s volume, and can be computed by using proper models. The interaction between the scanning probe and the sample generates a series of detectable signals (back scattered electrons, secondary electrons, x-rays, specimen current, etc.) which contain information on sample morphology, microstructure, composition, etc. - In x-ray diffraction, the interaction volume is the volume of material that interacts directly with the x-ray beam and is usually smaller than the volume of the entire specimen. Depending on sample’s structure and microstructure, the interaction between the sample and the x-ray incident beam generates a secondary (reflected) beam that is measured by a detector and contains information on certain sample’s properties (e.g., crystallographic structure, phase composition, grain size, residual stress, …). - In some cases, (like tribological characterisations) the “sample” can also be the “probe”. When analysing a system of samples that interact each other, finding a clear definition can become a complex problem. - It is important to note that, in some cases, the volume of interaction could be different from the volume of detectable signal emission. Example: in Scanning Electron Microscopy (SEM), the volume of interaction between the electron probe and the material is different from the volumes that generate the captured signal. - - - - - - - - - - - - - LinearMassDensity - Mass per length. - LinearDensity - LineicMass - LinearMassDensity - https://qudt.org/vocab/quantitykind/LinearDensity - https://www.wikidata.org/wiki/Q56298294 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-11 - 4-6 - Mass per length. - - - - - - - - - - - - - ParticleSourceDensity - Quotient of the mean rate of production of particles in a volume, and that volume. - ParticleSourceDensity - https://qudt.org/vocab/quantitykind/ParticleSourceDensity - https://www.wikidata.org/wiki/Q98915762 - 10-66 - Quotient of the mean rate of production of particles in a volume, and that volume. - - - - - - - - - - - - - - - - - - - - CharacterisationWorkflow - - A characterisation procedure that has at least two characterisation tasks as proper parts. - CharacterisationWorkflow - A characterisation procedure that has at least two characterisation tasks as proper parts. - - - - - - Join - A tessellation in wich a tile is next for two or more non spatially connected tiles. - Join - A tessellation in wich a tile is next for two or more non spatially connected tiles. - - - - - - - - - - - TemporalTiling - A well formed tessellation with tiles that are all temporal. - TemporalTiling - A well formed tessellation with tiles that are all temporal. - - - - - - - - - - - - - - - - AtomicMass - Since the nucleus account for nearly all of the total mass of atoms (with the electrons and nuclear binding energy making minor contributions), the atomic mass measured in Da has nearly the same value as the mass number. - The atomic mass is often expressed as an average of the commonly found isotopes. - The mass of an atom in the ground state. - AtomicMass - The mass of an atom in the ground state. - 10-4.1 - https://en.wikipedia.org/wiki/Atomic_mass - https://doi.org/10.1351/goldbook.A00496 - - - - - - - - - - - - - - - - - - - - - - - Mass - Property of a physical body that express its resistance to acceleration (a change in its state of motion) when a force is applied. - Mass - http://qudt.org/vocab/quantitykind/Mass - 4-1 - Property of a physical body that express its resistance to acceleration (a change in its state of motion) when a force is applied. - https://doi.org/10.1351/goldbook.M03709 - - - - - - - - - - - - AtomicPhysicsCrossSection - Measure of probability that a specific process will take place in a collision of two particles. - AtomicPhysicsCrossSection - https://qudt.org/vocab/quantitykind/Cross-Section.html - https://www.wikidata.org/wiki/Q17128025 - 10-38.1 - Measure of probability that a specific process will take place in a collision of two particles. - - - - - - - FastFissionFactor - In an infinite medium, the ratio of the mean number of neutrons produced by fission due to neutrons of all energies to the mean number of neutrons produced by fissions due to thermal neutrons only. - FastFissionFactor - https://qudt.org/vocab/quantitykind/FastFissionFactor - https://www.wikidata.org/wiki/Q99197493 - 10-75 - In an infinite medium, the ratio of the mean number of neutrons produced by fission due to neutrons of all energies to the mean number of neutrons produced by fissions due to thermal neutrons only. - - - - - - DataAcquisitionRate - - Quantify the raw data acquisition rate, if applicable. - DataAcquisitionRate - Quantify the raw data acquisition rate, if applicable. - - - - - - - - - - - - StructureFactor - Mathematical description in crystallography. - StructureFactor - https://qudt.org/vocab/quantitykind/StructureFactor - https://www.wikidata.org/wiki/Q900684 - 12-5.4 - Mathematical description in crystallography. - - - - - - SeparateManufacturing - A manufacturing process in which the shape of a workpiece is changed by breaking the material cohesion at the processing point and thus the material cohesion is reduced overall. - DIN 8580:2020 - Trennen - CuttingManufacturing - SeparateManufacturing - A manufacturing process in which the shape of a workpiece is changed by breaking the material cohesion at the processing point and thus the material cohesion is reduced overall. - - - - - - - - - - - - - MolarEntropy - Entropy per amount of substance. - MolarEntropy - https://qudt.org/vocab/quantitykind/MolarEntropy - https://www.wikidata.org/wiki/Q68972876 - 9-8 - Entropy per amount of substance. - - - - - - EnergyDispersiveXraySpectroscopy - - An analytical technique used for the elemental analysis or chemical characterization of a sample. - EDS - EDX - EnergyDispersiveXraySpectroscopy - https://www.wikidata.org/wiki/Q386334 - An analytical technique used for the elemental analysis or chemical characterization of a sample. - https://en.wikipedia.org/wiki/Energy-dispersive_X-ray_spectroscopy - - - - - - - - - T0 L+4 M0 I0 Θ0 N0 J0 - - - QuarticLengthUnit - QuarticLengthUnit - - - - - - - - - - - - Experiment - An experiment is a process that is intended to replicate a physical phenomenon in a controlled environment. - Experiment - An experiment is a process that is intended to replicate a physical phenomenon in a controlled environment. - - - - - - - - - - - - - - - Observation - A characterisation of an object with an actual interaction. - Observation - A characterisation of an object with an actual interaction. - - - - - - - - - - - - - MomentOfIntertia - Scalar measure of the rotational inertia with respect to a fixed axis of rotation. - MomentOfIntertia - https://qudt.org/vocab/quantitykind/MomentOfInertia - https://www.wikidata.org/wiki/Q165618 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-21 - 4-7 - Scalar measure of the rotational inertia with respect to a fixed axis of rotation. - https://doi.org/10.1351/goldbook.M04006 - - - - - - - - - - - - - Radioactivity - Decays per unit time. - RadioactiveActivity - Radioactivity - http://qudt.org/vocab/quantitykind/SpecificActivity - Decays per unit time. - https://doi.org/10.1351/goldbook.A00114 - - - - - - - - - T-1 L0 M0 I0 Θ0 N0 J0 - - - FrequencyUnit - FrequencyUnit - - - - - - - LiquidSol - A type of sol in the form of one solid dispersed in liquid. - LiquidSol - A type of sol in the form of one solid dispersed in liquid. - - - - - - - Material - A instance of a material (e.g. nitrogen) can represent different states of matter. The fact that the individual also belongs to other classes (e.g. Gas) would reveal the actual form in which the material is found. - The class of individuals standing for an amount of ordinary matter substance (or mixture of substances) in different states of matter or phases. - Material - The class of individuals standing for an amount of ordinary matter substance (or mixture of substances) in different states of matter or phases. - A instance of a material (e.g. nitrogen) can represent different states of matter. The fact that the individual also belongs to other classes (e.g. Gas) would reveal the actual form in which the material is found. - Material usually means some definite kind, quality, or quantity of matter, especially as intended for use. - - - - - - OrdinaryMatter - Matter composed of only matter particles, excluding anti-matter particles. - OrdinaryMatter - Matter composed of only matter particles, excluding anti-matter particles. - - - - - - - - - - - - - - - - - - Substance - A composite physical object made of fermions (i.e. having mass and occupying space). - Substance - A composite physical object made of fermions (i.e. having mass and occupying space). - - - - - - - - - T-3 L+2 M+1 I-1 Θ0 N0 J0 - - - ElectricPotentialUnit - ElectricPotentialUnit - - - - - - - MolarGasConstant - Equivalent to the Boltzmann constant, but expressed in units of energy per temperature increment per mole (rather than energy per temperature increment per particle). - MolarGasConstant - http://qudt.org/vocab/constant/MolarGasConstant - 9-37.1 - Equivalent to the Boltzmann constant, but expressed in units of energy per temperature increment per mole (rather than energy per temperature increment per particle). - https://doi.org/10.1351/goldbook.G02579 - - - - - - SIExactConstant - Physical constant that by definition (after the latest revision of the SI system that was enforsed May 2019) has a known exact numerical value when expressed in SI units. - SIExactConstant - Physical constant that by definition (after the latest revision of the SI system that was enforsed May 2019) has a known exact numerical value when expressed in SI units. - - - - - - CategorizedPhysicalQuantity - The superclass for all physical quantities classes that are categorized according to some domain of interests (e.g. metallurgy, chemistry), property (intensive/extensive) or application. - https://physics.nist.gov/cuu/Constants - CategorizedPhysicalQuantity - The superclass for all physical quantities classes that are categorized according to some domain of interests (e.g. metallurgy, chemistry), property (intensive/extensive) or application. - - - - - - - - - - - - - - - - - - - - SpatioTemporalTessellation - A tessellation in which all tiles are connected through spatiotemporal relations hasNext or contacts. - WellFormedTessellation - SpatioTemporalTessellation - A tessellation in which all tiles are connected through spatiotemporal relations hasNext or contacts. - - - - - - - - - - - - - - - - - - - - - - - - - SpatioTemporalTile - https://w3id.org/emmo#EMMO_22c91e99_61f8_4433_8853_432d44a2a46a - WellFormedTile - SpatioTemporalTile - - - - - - - AngularReciprocalLatticeVector - Vector whose scalar products with all fundamental lattice vectors are integral multiples of 2pi. - AngularReciprocalLatticeVector - https://qudt.org/vocab/quantitykind/AngularReciprocalLatticeVector - https://www.wikidata.org/wiki/Q105475278 - 12-2.1 - Vector whose scalar products with all fundamental lattice vectors are integral multiples of 2pi. - - - - - - - GrandCanonicalPartionFunction - GrandPartionFunction - GrandCanonicalPartionFunction - https://qudt.org/vocab/quantitykind/GrandCanonicalPartitionFunction - https://www.wikidata.org/wiki/Q96176022 - 9-35.3 - - - - - - MetallicPowderSintering - MetallicPowderSintering - - - - - - - MathematicalOperator - A mapping that acts on elements of one space and produces elements of another space. - MathematicalOperator - A mapping that acts on elements of one space and produces elements of another space. - The algebraic operator '+' that acts on two real numbers and produces one real number. - The differential operator that acts on a C1 real function and produces another real function. - - - - - - + + + - - T-2 L+2 M+1 I0 Θ-1 N0 J0 + + - - EntropyUnit - EntropyUnit - - - - - - InterferenceFitting - InterferenceFitting - - - - - - Pressing - A collective term for the processes in which, during joining, the parts to be joined and any auxiliary parts are essentially only elastically deformed and unintentional loosening is prevented by frictional connection. - Anpressen - Pressing - - - - - - Calendering - Calendering - - - - - - FormingFromPlastic - FormingFromPlastic - - - - - - + + - - T-1 L-2 M0 I0 Θ0 N0 J0 + + - - PerAreaTimeUnit - PerAreaTimeUnit - - - - - - Agent - A participant that is the driver of the process. - An agent is not necessarily human. -An agent plays an active role within the process. -An agent is a participant of a process that would not occur without it. - Agent - A participant that is the driver of the process. - A catalyst. A bus driver. A substance that is initiating a reaction that would not occur without its presence. - An agent is not necessarily human. -An agent plays an active role within the process. -An agent is a participant of a process that would not occur without it. - - - - - - Viscometry - - Viscometry or viscosity method was one of the first methods used for determining the MW of polymers. In this method, the viscosity of polymer solution is measured, and the simplest method used is capillary viscometry by using the Ubbelohde U-tube viscometer. In this method, both the flow time of the polymer solution (t) and the flow time of the pure solvent (t0) are recorded. The ratio of the polymer solution flow time (t) to the flow time of pure solvent (t0) is equal to the ratio of their viscosities (η/η0) only if they have the same densities. - Viscosity - Viscometry - Viscometry or viscosity method was one of the first methods used for determining the MW of polymers. In this method, the viscosity of polymer solution is measured, and the simplest method used is capillary viscometry by using the Ubbelohde U-tube viscometer. In this method, both the flow time of the polymer solution (t) and the flow time of the pure solvent (t0) are recorded. The ratio of the polymer solution flow time (t) to the flow time of pure solvent (t0) is equal to the ratio of their viscosities (η/η0) only if they have the same densities. - - - - - - CharacterisationTechnique - - A characterisation method is not only related to the measurement process which can be one of its steps. - The description of the overall characterisation method. It can be composed of different steps (e.g. sample preparation, calibration, measurement, post-processing). - Characterisation procedure - Characterisation technique - CharacterisationTechnique - The description of the overall characterisation method. It can be composed of different steps (e.g. sample preparation, calibration, measurement, post-processing). - A characterisation method is not only related to the measurement process which can be one of its steps. - - - - - - + + - - T-2 L0 M0 I0 Θ0 N0 J0 + + - - AngularFrequencyUnit - AngularFrequencyUnit - - - - - DataProcessingThroughCalibration - - Describes how raw data are corrected and/or modified through calibrations. - DataProcessingThroughCalibration - Describes how raw data are corrected and/or modified through calibrations. - - - - - - MeasurementParameter - - Describes the main input parameters that are needed to acquire the signal - MeasurementParameter - Describes the main input parameters that are needed to acquire the signal - - - - - - Parameter - A variable whose value is assumed to be known independently from the equation, but whose value is not explicitated in the equation. - Parameter - Viscosity in the Navier-Stokes equation - - - - - - WearTesting - A wear test measures the changes in conditions caused by friction, and the result is obtained from deformation, scratches, and indentations on the interacting surfaces. Wear is defined as the progressive removal of the material from a solid surface and manifested by a change in the geometry of the surface. - WearTesting - A wear test measures the changes in conditions caused by friction, and the result is obtained from deformation, scratches, and indentations on the interacting surfaces. Wear is defined as the progressive removal of the material from a solid surface and manifested by a change in the geometry of the surface. - - - - - - Fractography - - Fractography is the study of fracture surfaces in order to determine the relation between the microstructure and the mechanism(s) of crack initiation and propagation and, eventually, the root cause of the fracture .Fractography qualitatively interprets the mechanisms of fracture that occur in a sample by microscopic examination of fracture surface morpholog. - Fractography - Fractography is the study of fracture surfaces in order to determine the relation between the microstructure and the mechanism(s) of crack initiation and propagation and, eventually, the root cause of the fracture .Fractography qualitatively interprets the mechanisms of fracture that occur in a sample by microscopic examination of fracture surface morpholog. - - - - - - OpticalTesting - - OpticalTesting - - - - + - - - 1 + + - - - 1 + + - PrefixedUnit - A measurement unit that is made of a metric prefix and a unit symbol. - PrefixedUnit - A measurement unit that is made of a metric prefix and a unit symbol. - + + + CharacterisationMeasurementProcess + Process of experimentally obtaining one or more values that can reasonably be attributed to a quantity together with any other available relevant information +NOTE 1 The quantity mentioned in the definition is an individual quantity. +NOTE 2 The relevant information mentioned in the definition may be about the values obtained by the measurement, +such that some may be more representative of the measurand than others. +NOTE 3 Measurement is sometimes considered to apply to nominal properties, but not in this Vocabulary, where the +process of obtaining values of nominal properties is called “examination”. +NOTE 4 Measurement requires both experimental comparison of quantities or experimental counting of entities at +some step of the process and the use of models and calculations that are based on conceptual considerations. +NOTE 5 The conditions of reasonable attribution mentioned in the definition take into account a description of the +quantity commensurate with the intended use of a measurement result, a measurement procedure, and a calibrated +measuring system operating according to the specified measurement procedure, including the measurement +conditions. Moreover, a maximum permissible error and/or a target uncertainty may be specified, and the +measurement procedure and the measuring system should then be chosen in order not to exceed these measuring +system specifications. - - - - - - - - - - - - Nucleon - Either a proton or a neutron. - Nucleon - Either a proton or a neutron. - https://en.wikipedia.org/wiki/Nucleon +-- International Vocabulary of Metrology(VIM) + The measurement process associates raw data to the sample through a probe and a detector. + CharacterisationMeasurementProcess + Process of experimentally obtaining one or more values that can reasonably be attributed to a quantity together with any other available relevant information +NOTE 1 The quantity mentioned in the definition is an individual quantity. +NOTE 2 The relevant information mentioned in the definition may be about the values obtained by the measurement, +such that some may be more representative of the measurand than others. +NOTE 3 Measurement is sometimes considered to apply to nominal properties, but not in this Vocabulary, where the +process of obtaining values of nominal properties is called “examination”. +NOTE 4 Measurement requires both experimental comparison of quantities or experimental counting of entities at +some step of the process and the use of models and calculations that are based on conceptual considerations. +NOTE 5 The conditions of reasonable attribution mentioned in the definition take into account a description of the +quantity commensurate with the intended use of a measurement result, a measurement procedure, and a calibrated +measuring system operating according to the specified measurement procedure, including the measurement +conditions. Moreover, a maximum permissible error and/or a target uncertainty may be specified, and the +measurement procedure and the measuring system should then be chosen in order not to exceed these measuring +system specifications. + +-- International Vocabulary of Metrology(VIM) + The measurement process associates raw data to the sample through a probe and a detector. + Measurement - - + + - - + + - - Baryon - Subatomic particle which contains an odd number of valence quarks, at least 3. - Baryon - Subatomic particle which contains an odd number of valence quarks, at least 3. - https://en.wikipedia.org/wiki/Baryon - - - - - - ThermalCutting - Thermal ablation is the separation of material particles in solid, liquid or gaseous state by heat processes as well as the removal of these material particles by mechanical or electromagnetic forces (from: DIN - Thermisches Abtragen - ThermalCutting - Thermal ablation is the separation of material particles in solid, liquid or gaseous state by heat processes as well as the removal of these material particles by mechanical or electromagnetic forces (from: DIN - - - - - - Ablation - Manufacturing by separating particles of material from a solid body by non-mechanical means. Ablation refers both to the removal of layers of material and to the separation of workpiece parts. The production process of ablation is considered in its stationary instantaneous state, independently of the application of auxiliary processes necessary to initiate the process. Ablation is divided into three subgroups according to the order point of view (OGP) "process in the effective zone on the surface of the workpiece": - thermal ablation; - chemical ablation; - electrochemical ablation. - Abtragen - Ablation - - - - - CausalInteraction - A causal interaction is a fundamental causal system that is expressed as a complete bupartite directed graph K(m,n), when m=n. - CausalInteraction - A causal interaction is a fundamental causal system that is expressed as a complete bupartite directed graph K(m,n), when m=n. - - - - - - + + - - - VolumicCrossSection - In nuclear physics, product of the number density of atoms of a given type and the cross section. - MacroscopicCrossSection - VolumicCrossSection - https://qudt.org/vocab/quantitykind/MacroscopicCrossSection - https://www.wikidata.org/wiki/Q98280520 - 10-42.1 - In nuclear physics, product of the number density of atoms of a given type and the cross section. - https://doi.org/10.1351/goldbook.M03674 + + + + + + + + + Measurement + A measurement always implies a causal interaction between the object and the observer. + A measurement is the process of experimentally obtaining one or more measurement results that can reasonably be attributed to a quantity. + An 'observation' that results in a quantitative comparison of a 'property' of an 'object' with a standard reference based on a well defined mesurement procedure. + Measurement + An 'observation' that results in a quantitative comparison of a 'property' of an 'object' with a standard reference based on a well defined mesurement procedure. + measurement - - - - + + + - - T-2 L+2 M+1 I0 Θ0 N0 J0 + + + 1 - - EnergyUnit - EnergyUnit - + + + + + + + + + CalibrationProcess + Operation performed on a measuring instrument or a measuring system that, under specified conditions +1. establishes a relation between the values with measurement uncertainties provided by measurement standards and corresponding indications with associated measurement uncertainties and +2. uses this information to establish a relation for obtaining a measurement result from an indication +NOTE 1 The objective of calibration is to provide traceability of measurement results obtained when using a calibrated measuring instrument or measuring system. +NOTE 2 The outcome of a calibration may be expressed by a statement, calibration function, calibration diagram, calibration curve, or calibration table. In some cases, it may consist of an additive or multiplicative correction of the indication with associated measurement uncertainty. +NOTE 3 Calibration should not be confused with adjustment of a measuring system, often mistakenly called “selfcalibration”, nor with verification of calibration. Calibration is sometimes a prerequisite for verification, which provides confirmation that specified requirements (often maximum permissible errors) are met. Calibration is sometimes also a prerequisite for adjustment, which is the set of operations carried out on a measuring system such that the system provides prescribed indications corresponding to given values of quantities being measured, typically obtained from +measurement standards. +NOTE 4 Sometimes the first step alone of the operation mentioned in the definition is intended as being calibration, as it was in previous editions of this Vocabulary. The second step is in fact required to establish instrumental uncertainty +for the measurement results obtained when using the calibrated measuring system. The two steps together aim to demonstrate the metrological traceability of measurement results obtained by a calibrated measuring system. In the +past the second step was usually considered to occur after the calibration. +NOTE 5 A comparison between two measurement standards may be viewed as a calibration if the comparison is used to check and, if necessary, correct the value and measurement uncertainty attributed to one of the measurement +standards. - - - - - Gel - A soft, solid or solid-like colloid consisting of two or more components, one of which is a liquid, present in substantial quantity. - Gel - A soft, solid or solid-like colloid consisting of two or more components, one of which is a liquid, present in substantial quantity. - +-- International Vocabulary of Metrology(VIM) + Sequence of operations/actions that are needed to convert the initial signal (as produced by the detector) into a meaningful and useable raw data. + Usually the calibration process involve a reference sample (with pre-defined, specific, and stable physical characteristics and known properties), in order to extract calibration data. In this way, the accuracy of the measurement tool and its components (for example the probe) will be evaluated and confirmed. + CalibrationProcess + Operation performed on a measuring instrument or a measuring system that, under specified conditions +1. establishes a relation between the values with measurement uncertainties provided by measurement standards and corresponding indications with associated measurement uncertainties and +2. uses this information to establish a relation for obtaining a measurement result from an indication +NOTE 1 The objective of calibration is to provide traceability of measurement results obtained when using a calibrated measuring instrument or measuring system. +NOTE 2 The outcome of a calibration may be expressed by a statement, calibration function, calibration diagram, calibration curve, or calibration table. In some cases, it may consist of an additive or multiplicative correction of the indication with associated measurement uncertainty. +NOTE 3 Calibration should not be confused with adjustment of a measuring system, often mistakenly called “selfcalibration”, nor with verification of calibration. Calibration is sometimes a prerequisite for verification, which provides confirmation that specified requirements (often maximum permissible errors) are met. Calibration is sometimes also a prerequisite for adjustment, which is the set of operations carried out on a measuring system such that the system provides prescribed indications corresponding to given values of quantities being measured, typically obtained from +measurement standards. +NOTE 4 Sometimes the first step alone of the operation mentioned in the definition is intended as being calibration, as it was in previous editions of this Vocabulary. The second step is in fact required to establish instrumental uncertainty +for the measurement results obtained when using the calibrated measuring system. The two steps together aim to demonstrate the metrological traceability of measurement results obtained by a calibrated measuring system. In the +past the second step was usually considered to occur after the calibration. +NOTE 5 A comparison between two measurement standards may be viewed as a calibration if the comparison is used to check and, if necessary, correct the value and measurement uncertainty attributed to one of the measurement +standards. - - - - Colloid - A mixture in which one substance of microscopically dispersed insoluble or soluble particles (from 1 nm to 1 μm) is suspended throughout another substance and that does not settle, or would take a very long time to settle appreciably. - Colloids are characterized by the occurring of the Tyndall effect on light. - Colloid - A mixture in which one substance of microscopically dispersed insoluble or soluble particles (from 1 nm to 1 μm) is suspended throughout another substance and that does not settle, or would take a very long time to settle appreciably. - Colloids are characterized by the occurring of the Tyndall effect on light. +-- International Vocabulary of Metrology(VIM) + Sequence of operations/actions that are needed to convert the initial signal (as produced by the detector) into a meaningful and useable raw data. + In nanoindentation, the electrical signal coming from capacitive displacement gauge is converted into a real raw-displacement signal after using a proper calibration function (as obtained by the equipment manufacturer). Then, additional calibration procedures are applied to define the point of initial contact and to correct for instrument compliance, thermal drift, and indenter area function to obtain the real useable displacement data. + Usually the calibration process involve a reference sample (with pre-defined, specific, and stable physical characteristics and known properties), in order to extract calibration data. In this way, the accuracy of the measurement tool and its components (for example the probe) will be evaluated and confirmed. - - - - - - - T+1 L-3 M0 I+1 Θ0 N0 J0 - - - ElectricChargeDensityUnit - ElectricChargeDensityUnit + + + + ReferenceSample + + Material, sufficiently homogeneous and stable with reference to one or more specified properties, which has been established to be fit for its intended use in measurement or in examination +NOTE 1 Reference materials can be certified reference materials or reference materials without a certified property +value. +NOTE 2 For a reference material to be used as a measurement standard for calibration purposes it needs to be a certified reference material. +NOTE 3 Reference materials can be used for measurement precision evaluation and quality control. +EXAMPLE Human serum without an assigned quantity value for the amount-of-substance concentration of the inherent cholesterol, used for quality control. +NOTE 4 Properties of reference materials can be quantities or nominal properties. +NOTE 5 A reference material is sometimes incorporated into a specially fabricated device. +EXAMPLE Spheres of uniform size mounted on a microscope slide. +NOTE 6 Some reference materials have assigned values in a unit outside the SI. Such materials include vaccines to +which International Units (IU) have been assigned by the World Health Organization. +NOTE 7 A given reference material can only be used for one purpose in a measurement, either calibration or quality +control, but not both. +NOTE 8 ISO/REMCO has an analogous definition but uses the term “measurement process” (ISO Guide 30, Reference +materials – Selected terms and definitions, definition 2.1.1) for both measurement and examination. + +-- International Vocabulary of Metrology(VIM) + Material, sufficiently homogeneous and stable with respect to one or more specified properties, which has been established to be fit for its intended use in a measurement process”. + ReferenceSpecimen + Certified Reference Material + Reference material + ReferenceSample + Material, sufficiently homogeneous and stable with reference to one or more specified properties, which has been established to be fit for its intended use in measurement or in examination +NOTE 1 Reference materials can be certified reference materials or reference materials without a certified property +value. +NOTE 2 For a reference material to be used as a measurement standard for calibration purposes it needs to be a certified reference material. +NOTE 3 Reference materials can be used for measurement precision evaluation and quality control. +EXAMPLE Human serum without an assigned quantity value for the amount-of-substance concentration of the inherent cholesterol, used for quality control. +NOTE 4 Properties of reference materials can be quantities or nominal properties. +NOTE 5 A reference material is sometimes incorporated into a specially fabricated device. +EXAMPLE Spheres of uniform size mounted on a microscope slide. +NOTE 6 Some reference materials have assigned values in a unit outside the SI. Such materials include vaccines to +which International Units (IU) have been assigned by the World Health Organization. +NOTE 7 A given reference material can only be used for one purpose in a measurement, either calibration or quality +control, but not both. +NOTE 8 ISO/REMCO has an analogous definition but uses the term “measurement process” (ISO Guide 30, Reference +materials – Selected terms and definitions, definition 2.1.1) for both measurement and examination. + +-- International Vocabulary of Metrology(VIM) + Quality control sample used to determine accuracy and precision of method. [ISO 17858:2007] + Material, sufficiently homogeneous and stable with respect to one or more specified properties, which has been established to be fit for its intended use in a measurement process”. + Reference material - - - - - - - T-2 L+2 M+1 I0 Θ0 N-1 J0 - - - EnergyPerAmountUnit - EnergyPerAmountUnit + + + Electron + The class of individuals that stand for electrons elementary particles belonging to the first generation of leptons. + Electron + The class of individuals that stand for electrons elementary particles belonging to the first generation of leptons. + https://en.wikipedia.org/wiki/Electron - + - - PeriodDuration - duration of one cycle of a periodic event - Period - PeriodDuration - https://qudt.org/vocab/quantitykind/Period - https://www.wikidata.org/wiki/Q2642727 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-06-01 - 3-14 - duration of one cycle of a periodic event - https://doi.org/10.1351/goldbook.P04493 + + Susceptance + imaginary part of the admittance + Susceptance + https://qudt.org/vocab/quantitykind/Susceptance + https://www.wikidata.org/wiki/Q509598 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-54 + 6-52.3 + imaginary part of the admittance - + - T-2 L0 M+1 I0 Θ0 N0 J0 - - - ForcePerLengthUnit - ForcePerLengthUnit - - - - - - - - - T0 L-1 M0 I0 Θ0 N0 J0 + T+2 L+2 M-1 I+2 Θ0 N0 J0 - ReciprocalLengthUnit - ReciprocalLengthUnit + EnergyPerSquareMagneticFluxDensityUnit + EnergyPerSquareMagneticFluxDensityUnit - + - + - - Frequency - Number of periods per time interval. - Frequency - http://qudt.org/vocab/quantitykind/Frequency - https://www.wikidata.org/wiki/Q11652 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-06-02 - 3-15.1 - Number of periods per time interval. - https://doi.org/10.1351/goldbook.FT07383 - - - - - - FormingFromLiquid - FormingFromLiquid + + Mobility + Quotient of average drift speed imparted to a charged particle in a medium by an electric field, and the electric field strength. + Mobility + https://qudt.org/vocab/quantitykind/Mobility + https://www.wikidata.org/wiki/Q900648 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-06-36 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-02-77 + 10-61 + Quotient of average drift speed imparted to a charged particle in a medium by an electric field, and the electric field strength. + https://doi.org/10.1351/goldbook.M03955 - - - - FromNotProperShapeToWorkPiece - From Powder, from liquid, from gas - da una forma non propria ad una forma propria - FromNotProperShapeToWorkPiece - From Powder, from liquid, from gas - Powder: -particles that are usually less than 1 mm in size + + + + + ResonanceEscapeProbability + In an infinite medium, the probability that a neutron slowing down will traverse all or some specified portion of the range of resonance energies without being absorbed. + ResonanceEscapeProbability + https://qudt.org/vocab/quantitykind/ResonanceEscapeProbability + https://www.wikidata.org/wiki/Q4108072 + 10-68 + In an infinite medium, the probability that a neutron slowing down will traverse all or some specified portion of the range of resonance energies without being absorbed. - - - - - - - - - - AlgebricEquation - An 'equation' that has parts two 'polynomial'-s - AlgebricEquation - 2 * a - b = c + + + + Probability + Probability is a dimensionless quantity that can attain values between 0 and 1; zero denotes the impossible event and 1 denotes a certain event. + The propability for a certain outcome, is the ratio between the number of events leading to the given outcome and the total number of events. + Probability + Probability is a dimensionless quantity that can attain values between 0 and 1; zero denotes the impossible event and 1 denotes a certain event. + https://doi.org/10.1351/goldbook.P04855 - - + + - - + + + + + + - - - Equation - An equation with variables can always be represented as: + + + + + + + + + + SemioticEntity + Semiotic subclasse are defined using Peirce's semiotic theory. -f(v0, v1, ..., vn) = g(v0, v1, ..., vn) +"Namely, a sign is something, A, which brings something, B, its interpretant sign determined or created by it, into the same sort of correspondence with something, C, its object, as that in which itself stands to C." (Peirce 1902, NEM 4, 20–21). -where f is the left hand and g the right hand side expressions and v0, v1, ..., vn are the variables. - The class of 'mathematical'-s that stand for a statement of equality between two mathematical expressions. - Equation - The class of 'mathematical'-s that stand for a statement of equality between two mathematical expressions. - 2+3 = 5 -x^2 +3x = 5x -dv/dt = a -sin(x) = y - +The triadic elements: +- 'sign': the sign A (e.g. a name) +- 'interpretant': the sign B as the effects of the sign A on the interpreter (e.g. the mental concept of what a name means) +- 'object': the object C (e.g. the entity to which the sign A and B refer to) - - - Declared - A semantic object that is connected to a conventional sign by an interpreter (a declarer) according to a specific convention. - Declared - A semantic object that is connected to a conventional sign by an interpreter (a declarer) according to a specific convention. +This class includes also the 'interpeter' i.e. the entity that connects the 'sign' to the 'object' + The class of individuals that stands for semiotic objects, i.e. objects that take part on a semiotic process. + SemioticEntity + The class of individuals that stands for semiotic objects, i.e. objects that take part on a semiotic process. - - - Description - A coded that is not atomic with respect to a code of description. - A description is a collection of properties that depicts an object. It is not atomic since it is made of several properties collected together. - Description - A coded that is not atomic with respect to a code of description. - A biography. - A sentence about some object, depticting its properties. - A description is a collection of properties that depicts an object. It is not atomic since it is made of several properties collected together. + + + + + + + T-2 L-2 M0 I0 Θ0 N0 J0 + + + FrequencyPerAreaTimeUnit + FrequencyPerAreaTimeUnit - - - - - - - - - - - - - - - - - - - CharmAntiQuark - CharmAntiQuark + + + + ScanningElectronMicroscopy + + The scanning electron microscope (SEM) uses a focused beam of high-energy electrons to generate a variety of signals at the surface of solid specimens. The signals that derive from electron-sample interactions reveal information about the sample including external morphology (texture), chemical composition, and crystalline structure and orientation of materials making up the sample. + SEM + ScanningElectronMicroscopy + The scanning electron microscope (SEM) uses a focused beam of high-energy electrons to generate a variety of signals at the surface of solid specimens. The signals that derive from electron-sample interactions reveal information about the sample including external morphology (texture), chemical composition, and crystalline structure and orientation of materials making up the sample. - + - + - - KinematicViscosity - Quotient of dynamic viscosity and mass density of a fluid. - KinematicViscosity - https://qudt.org/vocab/quantitykind/KinematicViscosity - https://www.wikidata.org/wiki/Q15106259 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-35 - 4-25 - Quotient of dynamic viscosity and mass density of a fluid. - https://doi.org/10.1351/goldbook.K03395 + + FundamentalLatticeVector + Fundamental translation vector for the crystal lattice. + FundamentalLatticeVector + https://qudt.org/vocab/quantitykind/FundamentalLatticeVector + https://www.wikidata.org/wiki/Q105451063 + 12-1.2 + Fundamental translation vector for the crystal lattice. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + EMMO + EMMO entities dimensionality is related to their mereocausal structures. From the no-dimensional quantum entity, we introduce time dimension with the elementary concept, and the spacetime with the causal system concept. +The EMMO conceptualisation does not allow the existence of space without a temporal dimension, the latter coming from a causal relation between entities. +For this reason, the EMMO entities that are not quantum or elementaries, may be considered to be always spatiotemporal. The EMMO poses no constraints to the number of spatial dimensions for a causal system (except being higher than one). + The EMMO conceptualises the world using the primitive concepts of causality and parthood. Parthood is about the composition of world entities starting from other more fundamental entities. Causality is about the interactions between world entities. +The quantum is the smallest indivisible part of any world entity. Quantum individuals are the fundamental causal constituents of the universe, since it is implied that causality originates from quantum-to-quantum interactions. Quantums are no-dimensional, and their aggregation makes spacetime emerge from their causal structure. Causality between macro entities (i.e. entities made of more than one quantum) is explained as the sum of the causality relations between their quantum constituents. +The fundamental distinction between world entities is direct causality self-connectedness: a world entity can be self-connected xor not self-connected depending on the causality network of its fundamental components. +Void regions do not exist in the EMMO, or in other words there is no spacetime without entities, since space and time are measured quantities following a causality relation between entities (spacetime emerges as relational property not as a self-standing entity). +Entities are not placed in space or time: space and time are always relative between entities and are measured. In other words, space and time relations originates from causality interactions. + The class of all the OWL individuals declared by EMMO as standing for world entities. + The disjoint union of the Item and Collection classes. + EMMO + The EMMO conceptualises the world using the primitive concepts of causality and parthood. Parthood is about the composition of world entities starting from other more fundamental entities. Causality is about the interactions between world entities. +The quantum is the smallest indivisible part of any world entity. Quantum individuals are the fundamental causal constituents of the universe, since it is implied that causality originates from quantum-to-quantum interactions. Quantums are no-dimensional, and their aggregation makes spacetime emerge from their causal structure. Causality between macro entities (i.e. entities made of more than one quantum) is explained as the sum of the causality relations between their quantum constituents. +The fundamental distinction between world entities is direct causality self-connectedness: a world entity can be self-connected xor not self-connected depending on the causality network of its fundamental components. +Void regions do not exist in the EMMO, or in other words there is no spacetime without entities, since space and time are measured quantities following a causality relation between entities (spacetime emerges as relational property not as a self-standing entity). +Entities are not placed in space or time: space and time are always relative between entities and are measured. In other words, space and time relations originates from causality interactions. + The disjoint union of the Item and Collection classes. + The class of all the OWL individuals declared by EMMO as standing for world entities. + EMMO entities dimensionality is related to their mereocausal structures. From the no-dimensional quantum entity, we introduce time dimension with the elementary concept, and the spacetime with the causal system concept. +The EMMO conceptualisation does not allow the existence of space without a temporal dimension, the latter coming from a causal relation between entities. +For this reason, the EMMO entities that are not quantum or elementaries, may be considered to be always spatiotemporal. The EMMO poses no constraints to the number of spatial dimensions for a causal system (except being higher than one). - + - + - Luminance - Measured in cd/m². Not to confuse with Illuminance, which is measured in lux (cd sr/m²). - a photometric measure of the luminous intensity per unit area of light travelling in a given direction. - Luminance - http://qudt.org/vocab/quantitykind/Luminance - https://doi.org/10.1351/goldbook.L03640 + ReciprocalDuration + InverseDuration + InverseTime + ReciprocalTime + ReciprocalDuration + https://qudt.org/vocab/quantitykind/InverseTime + https://www.wikidata.org/wiki/Q98690850 - - - + + + + - - - - - - + + T-1 L0 M+1 I0 Θ0 N0 J0 - - - - - - - - - - - - - - - - - - - - - - - - - Coded - A conventional referring to an object according to a specific code that reflects the results of a specific interaction mechanism and is shared between other interpreters. -A coded is always a partial representation of an object since it reflects the object capability to be part of a specific determination. -A coded is a sort of name or label that we put upon objects that interact with an determiner in the same specific way. - -For example, "hot" objects are objects that interact with an observer through a perception mechanism aimed to perceive an heat source. The code is made of terms such as "hot", "warm", "cold", that commonly refer to the perception of heat. - A conventional that stands for an object according to a code of interpretation to which the interpreter refers. - Let's define the class Colour as the subclass of the coded signs that involve photon emission and electromagnetic radiation sensible observers. -An individual C of this class Colour can be defined be declaring the process individual (e.g. daylight illumination) and the observer (e.g. my eyes) -Stating that an entity E hasCoded C, we mean that it can be observed by such setup of process + observer (i.e. observed by my eyes under daylight). -This definition can be specialised for human eye perception, so that the observer can be a generic human, or to camera perception so that the observer can be a device. -This can be used in material characterization, to define exactly the type of measurement done, including the instrument type. - Coded - A conventional that stands for an object according to a code of interpretation to which the interpreter refers. - A biography that makes use of a code that is provided by the meaning of the element of the language used by the author. - The name "red" that stands for the color of an object. - - - - - - - MassConcentrationOfWaterVapour - Quotient of the mass of water vapour in moist gas by the total gas volume. - The mass concentration of water at saturation is denoted vsat. - MassConcentrationOfWaterVapour - https://qudt.org/vocab/quantitykind/MassConcentrationOfWaterVapour - https://www.wikidata.org/wiki/Q76378808 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-60 - Quotient of the mass of water vapour in moist gas by the total gas volume. - - - - - - - LarmonFrequency - Quotient of Larmor angular frequency and 2π. - LarmonFrequency - 10-15.2 - Quotient of Larmor angular frequency and 2π. - - - - - - AbrasiveStrippingVoltammetry - - electrochemical method where traces of solid particles are abrasively transferred onto the surface of an electrode, followed by an electrochemical dissolution (anodic or cathodic dissolution) that is recorded as a current–voltage curve - AbrasiveStrippingVoltammetry - electrochemical method where traces of solid particles are abrasively transferred onto the surface of an electrode, followed by an electrochemical dissolution (anodic or cathodic dissolution) that is recorded as a current–voltage curve + MassPerTimeUnit + MassPerTimeUnit - + - - MeasurementTime + + Potentiometry - The overall time needed to acquire the measurement data - MeasurementTime - The overall time needed to acquire the measurement data - - - - - - - LiquidFoam - A foam of trapped gas in a liquid. - LiquidFoam - A foam of trapped gas in a liquid. + For measurements using ion-selective electrodes, the measurement is made under equi- librium conditions what means that the macroscopic electric current is zero and the con- centrations of all species are uniform throughout the solution. The indicator electrode is in direct contact with the analyte solution, whereas the reference electrode is usually separated from the analyte solution by a salt bridge. The potential difference between the indicator and reference electrodes is normally directly proportional to the logarithm of the activity (concentration) of the analyte in the solution (Nernst equation). See also ion selec- tive electrode. + Method of electroanalytical chemistry based on measurement of an electrode potential. + Potentiometric methods are used to measure the electrochemical potentials of a metallic structure in a given environment. + Potentiometry + https://www.wikidata.org/wiki/Q900632 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-04-12 + Potentiometric methods are used to measure the electrochemical potentials of a metallic structure in a given environment. + https://doi.org/10.1515/pac-2018-0109 - - - - Foam - A colloid formed by trapping pockets of gas in a liquid or solid. - Foam - A colloid formed by trapping pockets of gas in a liquid or solid. + + + + + ShortRangeOrderParameter + fraction of nearest-neighbour atom pairs in an Ising ferromagnet having magnetic moments in one direction, minus the fraction having magnetic moments in the opposite direction + ShortRangeOrderParameter + https://qudt.org/vocab/quantitykind/Short-RangeOrderParameter + https://www.wikidata.org/wiki/Q105495979 + 12-5.1 + fraction of nearest-neighbour atom pairs in an Ising ferromagnet having magnetic moments in one direction, minus the fraction having magnetic moments in the opposite direction - + - Quantum - A quantum is the EMMO mereological atomistic and causal reductionistic entity. To avoid confusion with the concept of atom coming from physics and to underline the causal reductionistic approach, we will use the expression quantum mereology, instead of atomistic mereology. - A quantum is the most fundamental item (both mereologically and causally) and is considered causally self-connected by definition. -The quantum concept recalls the fact that there is lower epistemological limit to our knowledge of the universe, related to the uncertainity principle. -Space and time emerge following the network of causal connections between quantum objects. So quantum objects are adimensional objects, that precede space and time dimensions: they are simple beings (in greek οντα). -Using physics concepts, we can think the quantum as an elementary particle (e.g. an electron) in a specific state between two causal interactions. - The class of entities without proper parts. - The class of the mereological and causal fundamental entities. - Quantum - A quantum is the most fundamental item (both mereologically and causally) and is considered causally self-connected by definition. -The quantum concept recalls the fact that there is lower epistemological limit to our knowledge of the universe, related to the uncertainity principle. -Space and time emerge following the network of causal connections between quantum objects. So quantum objects are adimensional objects, that precede space and time dimensions: they are simple beings (in greek οντα). -Using physics concepts, we can think the quantum as an elementary particle (e.g. an electron) in a specific state between two causal interactions. - The class of entities without proper parts. - The class of the mereological and causal fundamental entities. - From a physics perspective a quantum can be related to smallest identifiable entities, according to the limits imposed by the uncertainty principle in space and time measurements. -However, the quantum mereotopology approach is not restricted only to physics. For example, in a manpower management ontology, a quantum can stand for an hour (time) of a worker (space) activity. - A quantum is the EMMO mereological atomistic and causal reductionistic entity. To avoid confusion with the concept of atom coming from physics and to underline the causal reductionistic approach, we will use the expression quantum mereology, instead of atomistic mereology. - - - - - - Painting - Painting - - - - - - CoatingManufacturing - A manufacturing in which an adherent layer of amorphous material is applied to a workpiece. - DIN 8580:2020 - Beschichten - CoatingManufacturing - A manufacturing in which an adherent layer of amorphous material is applied to a workpiece. - - - - - ExactConstant - Physical constant used to define a unit system. Hence, when expressed in that unit system they have an exact value with no associated uncertainty. - ExactConstant - Physical constant used to define a unit system. Hence, when expressed in that unit system they have an exact value with no associated uncertainty. - - - - - - - HoleDensity - Number of holes in valence band per volume. - HoleDensity - https://qudt.org/vocab/quantitykind/HoleDensity - https://www.wikidata.org/wiki/Q105971101 - 12-29.2 - Number of holes in valence band per volume. + + + + + + + + + + + + + + + + + UpQuark + UpQuark + https://en.wikipedia.org/wiki/Up_quark - - + + - T+2 L+1 M-1 I0 Θ0 N0 J0 + T+4 L-3 M-1 I+2 Θ0 N0 J0 - PerPressureUnit - PerPressureUnit + PermittivityUnit + PermittivityUnit - - + + + + + MeanLinearRange + Mean total rectified path length travelled by a particle in the course of slowing down to rest in a given material averaged over a group of particles having the same initial energy. + MeanLinearRange + https://qudt.org/vocab/quantitykind/MeanLinearRange + https://www.wikidata.org/wiki/Q98681589 + 10-56 + Mean total rectified path length travelled by a particle in the course of slowing down to rest in a given material averaged over a group of particles having the same initial energy. + https://doi.org/10.1351/goldbook.M03782 + + + + - - - - - - + + - BaseUnit - A set of units that correspond to the base quantities in a system of units. - BaseUnit - A set of units that correspond to the base quantities in a system of units. - base unit + + MagneticTension + Scalar quantity equal to the line integral of the magnetic field strength H along a specified path linking two points a and b. + MagneticTension + https://qudt.org/vocab/quantitykind/MagneticTension + https://www.wikidata.org/wiki/Q77993836 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-57 + 6-37.2 + Scalar quantity equal to the line integral of the magnetic field strength H along a specified path linking two points a and b. - - + + + + GasLiquidSuspension + A coarse dispersion of liquid in a gas continuum phase. + GasLiquidSuspension + A coarse dispersion of liquid in a gas continuum phase. + Rain, spray. + + + + - - - - - - - - + + + + + + + + - - - - + + + + - Determiner - An 'interpreter' that perceives another 'entity' (the 'object') through a specific perception mechanism and produces a 'property' (the 'sign') that stands for the result of that particular perception. - Determiner - An 'interpreter' that perceives another 'entity' (the 'object') through a specific perception mechanism and produces a 'property' (the 'sign') that stands for the result of that particular perception. + MathematicalSymbol + MathematicalSymbol - - - - Admittance - Inverse of the impendance. - ComplexAdmittance - Admittance - https://qudt.org/vocab/quantitykind/Admittance - https://www.wikidata.org/wiki/Q214518 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-51 - https://dbpedia.org/page/Admittance - 6-52.1 - Inverse of the impendance. + + + + GrowingCrystal + GrowingCrystal - + + + + FormingFromLiquid + FormingFromLiquid + + + + + + + + + + + + + + + + PhysicalObject + A CausalSystem whose quantum parts are all bonded to the rest of the system. + It is natural to define entities made or more than one smaller parts according to some unity criteria. One of the most general one applicable to causal systems is to ask that all the quantum parts of the system are bonded to the rest. +In other words, causal convexity excludes all quantums that leave the system (no more interacting), or that are not yet part of it (not yet interacting). +So, a photon leaving a body is not part of the body as convex system, while a photon the is carrier of electromagnetic interaction between two molecular parts of the body, is part of the convex body. + PhysicalObject + A CausalSystem whose quantum parts are all bonded to the rest of the system. + It is natural to define entities made or more than one smaller parts according to some unity criteria. One of the most general one applicable to causal systems is to ask that all the quantum parts of the system are bonded to the rest. +In other words, causal convexity excludes all quantums that leave the system (no more interacting), or that are not yet part of it (not yet interacting). +So, a photon leaving a body is not part of the body as convex system, while a photon the is carrier of electromagnetic interaction between two molecular parts of the body, is part of the convex body. + + + - + - - - ElectricConductance - Inverse of 'ElectricalResistance'. - Measure of the ease for electric current to pass through a material. - Conductance - ElectricConductance - http://qudt.org/vocab/quantitykind/Conductance - https://www.wikidata.org/wiki/Q309017 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-06 - 6-47 - Measure of the ease for electric current to pass through a material. - https://doi.org/10.1351/goldbook.E01925 + + MassieuFunction + Negative quotient of Helmholtz energy and temperature. + MassieuFunction + https://qudt.org/vocab/quantitykind/MassieuFunction + https://www.wikidata.org/wiki/Q3077625 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-26 + 5-22 + Negative quotient of Helmholtz energy and temperature. - + - - - - - T+1 L+1 M0 I0 Θ+1 N0 J0 - - - LengthTimeTemperatureUnit - LengthTimeTemperatureUnit + + + MeanEnergyImparted + Expectation value of the energy imparted. + MeanEnergyImparted + https://qudt.org/vocab/quantitykind/MeanEnergyImparted + https://www.wikidata.org/wiki/Q99526969 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-12-44 + 10-80.2 + Expectation value of the energy imparted. - + - - NewtonianConstantOfGravity - Physical constant in Newton's law of gravitation and in Einstein's general theory of relativity. - NewtonianConstantOfGravity - http://qudt.org/vocab/constant/NewtonianConstantOfGravitation - https://doi.org/10.1351/goldbook.G02695 + + + CurieTemperature + Critical thermodynamic temperature of a ferromagnet. + CurieTemperature + https://qudt.org/vocab/quantitykind/CurieTemperature + https://www.wikidata.org/wiki/Q191073 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-12-51 + 12-35.1 + Critical thermodynamic temperature of a ferromagnet. - - - MeasuredConstant - For a given unit system, measured constants are physical constants that are not used to define the unit system. Hence, these constants have to be measured and will therefore be associated with an uncertainty. - MeasuredConstant - For a given unit system, measured constants are physical constants that are not used to define the unit system. Hence, these constants have to be measured and will therefore be associated with an uncertainty. + + + + CriticalTemperature + Temperature below which quantum effects dominate. + CriticalTemperature + https://www.wikidata.org/wiki/Q1450516 + Temperature below which quantum effects dominate. - - + + - - + + - - - Mobility - Quotient of average drift speed imparted to a charged particle in a medium by an electric field, and the electric field strength. - Mobility - https://qudt.org/vocab/quantitykind/Mobility - https://www.wikidata.org/wiki/Q900648 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-06-36 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-02-77 - 10-61 - Quotient of average drift speed imparted to a charged particle in a medium by an electric field, and the electric field strength. - https://doi.org/10.1351/goldbook.M03955 + + Array3D + 3-dimensional array who's spatial direct parts are matrices. + 3DArray + Array3D + 3-dimensional array who's spatial direct parts are matrices. + + + + + + Array + Array subclasses with a specific shape can be constructed with cardinality restrictions. + +See Shape4x3Matrix as an example. + Arrays are ordered mathematical objects who's elementary spatial parts are numbers. Their dimensionality is constructed with spatial direct parthood, where 1-dimensional arrays have spatial direct parts Number and n-dimensional array have spatial direct parts (n-1)-dimensional arrays. + Arrays are ordered objects, since they are a subclasses of Arrangement. + Array + Arrays are ordered mathematical objects who's elementary spatial parts are numbers. Their dimensionality is constructed with spatial direct parthood, where 1-dimensional arrays have spatial direct parts Number and n-dimensional array have spatial direct parts (n-1)-dimensional arrays. + A Vector is a 1-dimensional Array with Number as spatial direct parts, +a Matrix is a 2-dimensional Array with Vector as spatial direct parts, +an Array3D is a 3-dimensional Array with Matrix as spatial direct parts, +and so forth... - - - - Cleaning - Process for removing unwanted residual or waste material from a given product or material - Cleaning + + + + Tomography + Tomography is imaging by sections or sectioning that uses any kind of penetrating wave. The method is used in radiology, archaeology, biology, atmospheric science, geophysics, oceanography, plasma physics, materials science, cosmochemistry, astrophysics, quantum information, and other areas of science. The word tomography is derived from Ancient Greek τόμος tomos, "slice, section" and γράφω graphō, "to write" or, in this context as well, "to describe." A device used in tomography is called a tomograph, while the image produced is a tomogram. + Tomography + Tomography is imaging by sections or sectioning that uses any kind of penetrating wave. The method is used in radiology, archaeology, biology, atmospheric science, geophysics, oceanography, plasma physics, materials science, cosmochemistry, astrophysics, quantum information, and other areas of science. The word tomography is derived from Ancient Greek τόμος tomos, "slice, section" and γράφω graphō, "to write" or, in this context as well, "to describe." A device used in tomography is called a tomograph, while the image produced is a tomogram. - + - T0 L+3 M0 I0 Θ0 N-1 J0 + T-1 L0 M-1 I0 Θ0 N+1 J0 - VolumePerAmountUnit - VolumePerAmountUnit + AmountPerMassTimeUnit + AmountPerMassTimeUnit - - - MuonAntiNeutrino - MuonAntiNeutrino + + + + CyclicChronopotentiometry + Chronopotentiometry where the change in applied current undergoes a cyclic current reversal. + CyclicChronopotentiometry + Chronopotentiometry where the change in applied current undergoes a cyclic current reversal. - + - T0 L0 M0 I0 Θ0 N0 J+1 + T-4 L+2 M0 I0 Θ0 N0 J0 - LuminousIntensityUnit - LuminousIntensityUnit + AreaPerQuarticTimeUnit + AreaPerQuarticTimeUnit - + - - + + + + + + - - - GyromagneticRatio - Ratio of magnetic dipole moment to total angular momentum. - GyromagneticCoefficient - MagnetogyricRatio - GyromagneticRatio - https://qudt.org/vocab/quantitykind/GyromagneticRatio - https://www.wikidata.org/wiki/Q634552 - 10-12.1 - Ratio of magnetic dipole moment to total angular momentum. - https://doi.org/10.1351/goldbook.M03693 + + AtomicMass + Since the nucleus account for nearly all of the total mass of atoms (with the electrons and nuclear binding energy making minor contributions), the atomic mass measured in Da has nearly the same value as the mass number. + The atomic mass is often expressed as an average of the commonly found isotopes. + The mass of an atom in the ground state. + AtomicMass + The mass of an atom in the ground state. + 10-4.1 + https://en.wikipedia.org/wiki/Atomic_mass + https://doi.org/10.1351/goldbook.A00496 - + - + - - FundamentalReciprocalLatticeVector - Fundamental translation vectors for the reciprocal lattice. - FundamentalReciprocalLatticeVector - https://qudt.org/vocab/quantitykind/FundamentalReciprocalLatticeVector - https://www.wikidata.org/wiki/Q105475399 - 12-2.2 - Fundamental translation vectors for the reciprocal lattice. - - - - - - - 1 + + + + + + + + + Mass + Property of a physical body that express its resistance to acceleration (a change in its state of motion) when a force is applied. + Mass + http://qudt.org/vocab/quantitykind/Mass + 4-1 + Property of a physical body that express its resistance to acceleration (a change in its state of motion) when a force is applied. + https://doi.org/10.1351/goldbook.M03709 + + + + + + ConfigurationLanguage + A construction language used to write configuration files. + ConfigurationLanguage + A construction language used to write configuration files. + .ini files + Files in the standard .config directory on Unix systems. + https://en.wikipedia.org/wiki/Configuration_file#Configuration_languages + + + + + + ConstructionLanguage + A computer language by which a human can specify an executable problem solution to a computer. + ConstructionLanguage + A computer language by which a human can specify an executable problem solution to a computer. + https://en.wikipedia.org/wiki/Software_construction#Construction_languages + + + + + + LiquidSolidSuspension + A coarse dispersion of solids in a liquid continuum phase. + LiquidSolidSuspension + A coarse dispersion of solids in a liquid continuum phase. + Mud + + + + - - + + - - - - - - - - Real - A real number. - Real - A real number. + + + ElectricDipoleMoment + An electric dipole, vector quantity of magnitude equal to the product of the positive charge and the distance between the charges and directed from the negative charge to the positive charge. + ElectricDipoleMoment + http://qudt.org/vocab/quantitykind/ElectricDipoleMoment + https://www.wikidata.org/wiki/Q735135 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-35 + 6-6 + An electric dipole, vector quantity of magnitude equal to the product of the positive charge and the distance between the charges and directed from the negative charge to the positive charge. + https://doi.org/10.1351/goldbook.E01929 + + + + + Photon + The class of individuals that stand for photons elementary particles. + Photon + The class of individuals that stand for photons elementary particles. + https://en.wikipedia.org/wiki/Photon + + + + + + SquareWaveVoltammetry + + Most instruments show plots of the current at the end of the forward-going pulse and of the backward-going pulse vs. the potential, as well as their difference. This can give valuable information on the kinetics of the electrode reaction and the electrode process. + The current is sampled just before the end of the forward- going pulse and of the backward-going pulse and the difference of the two sampled currents is plotted versus the applied potential of the potential or staircase ramp. The square-wave voltammogram is peak-shaped + The sensitivity of SWV depends on the reversibility of the electrode reaction of the analyte. + voltammetry in which a square-wave potential waveform is superimposed on an underlying linearly varying potential ramp or staircase ramp + OSWV + OsteryoungSquareWaveVoltammetry + SWV + SquareWaveVoltammetry + https://www.wikidata.org/wiki/Q4016323 + voltammetry in which a square-wave potential waveform is superimposed on an underlying linearly varying potential ramp or staircase ramp + https://en.wikipedia.org/wiki/Squarewave_voltammetry + https://doi.org/10.1515/pac-2018-0109 + + + + + + + AverageLogarithmicEnergyDecrement + Average value of the increment of the lethargy per collision. + AverageLogarithmicEnergyDecrement + https://qudt.org/vocab/quantitykind/AverageLogarithmicEnergyDecrement.html + https://www.wikidata.org/wiki/Q1940739 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-07-02 + 10-70 + Average value of the increment of the lethargy per collision. + + + + + + + + + + + + + + + + + + + + + + + + + + + + MeasurementUnit + "Real scalar quantity, defined and adopted by convention, with which any other quantity of the same kind can be compared to express the ratio of the second quantity to the first one as a number" +ISO 80000-1 + A metrological reference for a physical quantity. + MeasurementUnit + A metrological reference for a physical quantity. + kg +m/s +km + measurement unit (VIM3 1.9) + "Real scalar quantity, defined and adopted by convention, with which any other quantity of the same kind can be compared to express the ratio of the second quantity to the first one as a number" +ISO 80000-1 + "Unit symbols are mathematical entities and not abbreviations." + +"Symbols for units are treated as mathematical entities. In expressing the value of a quantity as the product of a numerical value and a unit, both the numerical value and the unit may be treated by the ordinary rules of algebra." + +https://www.bipm.org/utils/common/pdf/si-brochure/SI-Brochure-9-EN.pdf + Measurement units and procedure units are disjoint. + Quantitative value are expressed as a multiple of the 'MeasurementUnit'. - - - - - Number - A number individual provides the link between the ontology and the actual data, through the data property hasNumericalValue. - A number is actually a string (e.g. 1.4, 1e-8) of numerical digits and other symbols. However, in order not to increase complexity of the taxonomy and relations, here we take a number as an "atomic" object, without decomposit it in digits (i.e. we do not include digits in the EMMO as alphabet for numbers). - A numerical data value. - In math usually number and numeral are distinct concepts, the numeral being the symbol or a composition of symbols (e.g. 3.14, 010010, three) and the number is the idea behind it. -More than one numeral stands for the same number. -In the EMMO abstract entities do not exists, and numbers are simply defined by other numerals, so that a number is the class of all the numerals that are equivalent (e.g. 3 and 0011 are numerals that stands for the same number). -Or alternatively, an integer numeral may also stands for a set of a specific cardinality (e.g. 3 stands for a set of three apples). Rational and real numbers are simply a syntactic arrangment of integers (digits, in decimal system). -The fact that you can't give a name to a number without using a numeral or, in case of positive integers, without referring to a real world objects set with specific cardinality, suggests that the abstract concept of number is not a concept that can be practically used. -For these reasons, the EMMO will consider numerals and numbers as the same concept. - Numeral - Number - A numerical data value. + + + ProcedureUnit + A reference unit provided by a measurement procedure. + Procedure units and measurement units are disjoint. + MeasurementProcedure + ProcedureUnit + A reference unit provided by a measurement procedure. + Rockwell C hardness of a given sample (150 kg load): 43.5HRC(150 kg) + Procedure units and measurement units are disjoint. - - - - XrayDiffraction - - a technique used to analyze the atomic and molecular structure of crystalline materials by observing the diffraction patterns produced when X-rays interact with the regular array of atoms in the crystal lattice - XRD - XrayDiffraction - https://www.wikidata.org/wiki/Q12101244 - a technique used to analyze the atomic and molecular structure of crystalline materials by observing the diffraction patterns produced when X-rays interact with the regular array of atoms in the crystal lattice - https://en.wikipedia.org/wiki/X-ray_crystallography + + + + ShearCutting + Cutting workpieces between two cutting edges that move past each other (see Figure 1 [see figure in the standard]). + Scherschneiden + ShearCutting - - - - ScatteringAndDiffraction - - ScatteringAndDiffraction + + + + Cutting + Mechanical separation of workpieces without the formation of shapeless material, i.e. also without chips (chipless). + Schneiden + Cutting - - - - - - - T-2 L+3 M+1 I-1 Θ0 N0 J0 - - - MagneticDipoleMomentUnit - MagneticDipoleMomentUnit + + + + Sol + A colloid in which small particles (1 nm to 100 nm) are suspended in a continuum phase. + Sol + A colloid in which small particles (1 nm to 100 nm) are suspended in a continuum phase. - - - - - Activity - Number dN of spontaneous nuclear transitions or nuclear disintegrations for a radionuclide of amount N produced during a short time interval dt, divided by this time interval. - Activity - https://qudt.org/vocab/quantitykind/Activity - https://www.wikidata.org/wiki/Q317949 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-05 - 10-27 - Number dN of spontaneous nuclear transitions or nuclear disintegrations for a radionuclide of amount N produced during a short time interval dt, divided by this time interval. - https://goldbook.iupac.org/terms/view/A00114 + + + + Colloid + A mixture in which one substance of microscopically dispersed insoluble or soluble particles (from 1 nm to 1 μm) is suspended throughout another substance and that does not settle, or would take a very long time to settle appreciably. + Colloids are characterized by the occurring of the Tyndall effect on light. + Colloid + A mixture in which one substance of microscopically dispersed insoluble or soluble particles (from 1 nm to 1 μm) is suspended throughout another substance and that does not settle, or would take a very long time to settle appreciably. + Colloids are characterized by the occurring of the Tyndall effect on light. - + - + - - + + + + + + + + + + + + + + + + + + + + + + - WBoson - A charged vector boson that mediate the weak interaction. - ChargedWeakBoson - IntermediateVectorBoson - WBoson - A charged vector boson that mediate the weak interaction. - https://en.wikipedia.org/wiki/W_and_Z_bosons + RedQuark + RedQuark - + + + + + IonizationEnergy + Difference between energy of an electron at rest at infinity and a certain energy level which is the energy of an electron in the interior of a substance. + IonizationEnergy + https://qudt.org/vocab/quantitykind/IonizationEnergy + https://www.wikidata.org/wiki/Q483769 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-06-39 + 12-24.2 + Difference between energy of an electron at rest at infinity and a certain energy level which is the energy of an electron in the interior of a substance. + https://doi.org/10.1351/goldbook.I03199 + + + + + + + LarmonAngularFrequency + Angular frequency of the electron angular momentum vector precession about the axis of an external magnetic field. + LarmonAngularFrequency + 10-15.1 + Angular frequency of the electron angular momentum vector precession about the axis of an external magnetic field. + + + + + AngularFrequency + Rate of change of the phase angle. + AngularFrequency + https://qudt.org/vocab/quantitykind/AngularFrequency + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-07-03 + https://dbpedia.org/page/Angular_frequency + 3-18 + Rate of change of the phase angle. + https://en.wikipedia.org/wiki/Angular_frequency + https://doi.org/10.1351/goldbook.A00352 + + + + + + Detector + Physical device (or the chain of devices) that is used to measure, quantify and store the signal after its interaction with the sample. + Detector + Physical device (or the chain of devices) that is used to measure, quantify and store the signal after its interaction with the sample. + Back Scattered Electrons (BSE) and Secondary Electrons (SE) detectors for SEM + Displacement and force sensors for mechanical testing + + + + - - + + + 1 - - DynamicViscosity - The measure of the resistance of a fluid to flow when an external force is applied. - Viscosity - DynamicViscosity - https://qudt.org/vocab/quantitykind/DynamicViscosity - https://www.wikidata.org/wiki/Q15152757 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-34 - 4-24 - The measure of the resistance of a fluid to flow when an external force is applied. - https://doi.org/10.1351/goldbook.D01877 + + + + + 1 + + + PrefixedUnit + A measurement unit that is made of a metric prefix and a unit symbol. + PrefixedUnit + A measurement unit that is made of a metric prefix and a unit symbol. - + + + + + + + + + Whole + A whole is always defined using a criterion expressed through the classical transitive parthood relation. +This class is expected to host the definition of world objects as they appear in its wholeness, dependently on some of their parts and independently on the surroundings. + A whole is categorized as fundamental (or maximal) or redundant (non-maximal). + The superclass of entities which are defined by requiring the existence of some parts (at least one) of specifically given types, where the specified types are different with respect to the type of the whole. + Whole + The superclass of entities which are defined by requiring the existence of some parts (at least one) of specifically given types, where the specified types are different with respect to the type of the whole. + A whole is always defined using a criterion expressed through the classical transitive parthood relation. +This class is expected to host the definition of world objects as they appear in its wholeness, dependently on some of their parts and independently on the surroundings. + + + - - - SolidAngularMeasure - Measure of a conical geometric figure, called solid angle, formed by all rays, originating from a common point, called the vertex of the solid angle, and passing through the points of a closed, non-self-intersecting curve in space considered as the border of a surface. - SolidAngle - SolidAngularMeasure - https://qudt.org/vocab/quantitykind/SolidAngle - https://www.wikidata.org/wiki/Q208476 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=102-04-46 - https://dbpedia.org/page/Solid_angle - 3-8 - Measure of a conical geometric figure, called solid angle, formed by all rays, originating from a common point, called the vertex of the solid angle, and passing through the points of a closed, non-self-intersecting curve in space considered as the border of a surface. - https://en.wikipedia.org/wiki/Solid_angle + + + HyperfineTransitionFrequencyOfCs + The frequency standard in the SI system in which the photon absorption by transitions between the two hyperfine ground states of caesium-133 atoms are used to control the output frequency. + +It defines the base unit second in the SI system. + HyperfineTransitionFrequencyOfCs + The frequency standard in the SI system in which the photon absorption by transitions between the two hyperfine ground states of caesium-133 atoms are used to control the output frequency. + +It defines the base unit second in the SI system. - + - - Angle - Ratio of circular arc length to radius. - PlaneAngle - Angle - http://qudt.org/vocab/quantitykind/PlaneAngle - Ratio of circular arc length to radius. - 3-5 - https://doi.org/10.1351/goldbook.A00346 + + SIExactConstant + Physical constant that by definition (after the latest revision of the SI system that was enforsed May 2019) has a known exact numerical value when expressed in SI units. + SIExactConstant + Physical constant that by definition (after the latest revision of the SI system that was enforsed May 2019) has a known exact numerical value when expressed in SI units. - + + + + Fork + A tessellation in wich a tile has next two or more non spatially connected tiles. + Fork + A tessellation in wich a tile has next two or more non spatially connected tiles. + + + - - ResistanceToAlternativeCurrent - Real part of the impedance. - ResistanceToAlternativeCurrent - https://www.wikidata.org/wiki/Q1048490 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-45 - 6-51.2 - Real part of the impedance. + + + + + + + + + ElectricChargeDensity + Electric charge per volume. + VolumeElectricCharge + ElectricChargeDensity + https://qudt.org/vocab/quantitykind/ElectricChargeDensity + https://www.wikidata.org/wiki/Q69425629 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-07 + 6-3 + Electric charge per volume. + https://doi.org/10.1351/goldbook.C00988 - + - - DifferentialStaircasePulseVoltammetry + + SamplePreparationInstrument - Differential Pulse Voltammetry in which small potential pulses are superimposed onto a staircase potential ramp. - DifferentialStaircasePulseVoltammetry - Differential Pulse Voltammetry in which small potential pulses are superimposed onto a staircase potential ramp. + SamplePreparationInstrument - - - DimensionlessUnit - The subclass of measurement units with no physical dimension. - DimensionlessUnit - http://qudt.org/vocab/unit/UNITLESS - The subclass of measurement units with no physical dimension. - Refractive index -Plane angle -Number of apples + + + + FormingFromGas + FormingFromGas - - - - Coulometry - - Coulometry used to measure the amount of substance is a primary reference measurement procedure [VIM 2.8] not requiring calibration with a standard for a quantity of the same kind (i.e. amount of substance). - The coulometric experiment can be carried out at controlled (constant) potential (see direct coulometry at controlled potential) or controlled (constant) current (see direct coulometry at controlled current). - electrochemical measurement principle in which the electric charge required to carry out a known electrochemical reaction is measured. By Faraday’s laws of electrolysis, the amount of substance is proportional to the charge - Coulometry - https://www.wikidata.org/wiki/Q1136979 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-04-13 - electrochemical measurement principle in which the electric charge required to carry out a known electrochemical reaction is measured. By Faraday’s laws of electrolysis, the amount of substance is proportional to the charge - https://en.wikipedia.org/wiki/Coulometry - https://doi.org/10.1515/pac-2018-0109 + + + + Numeral + Numeral - - - - + + + - - T0 L+2 M0 I0 Θ0 N0 J0 + + - - AreaUnit - AreaUnit + + + Theorisation + The 'semiosis' process of interpreting a 'physical' and provide a complec sign, 'theory' that stands for it and explain it to another interpreter. + Theorization + Theorisation + The 'semiosis' process of interpreting a 'physical' and provide a complec sign, 'theory' that stands for it and explain it to another interpreter. - + + + + + + + + + + + SurfaceActivityDensity + Quotient of the activity A of a sample and the total area S of the surface of that sample. + SurfaceActivityDensity + https://qudt.org/vocab/quantitykind/SurfaceActivityDensity + https://www.wikidata.org/wiki/Q98103005 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-10 + 10-30 + Quotient of the activity A of a sample and the total area S of the surface of that sample. + + + + + + StaticFrictionCoefficient + CoefficientOfStaticFriction + StaticFrictionFactor + StaticFrictionCoefficient + https://www.wikidata.org/wiki/Q73695673 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-33 + 4-23.1 + + + + - T-3 L+1 M+1 I0 Θ-1 N0 J0 + T-1 L+2 M+1 I0 Θ0 N0 J0 - ThermalConductivityUnit - ThermalConductivityUnit + AngularMomentumUnit + AngularMomentumUnit - - - - DirectCoulometryAtControlledCurrent - - Direct coulometry at controlled current is usually carried out in convective mass transfer mode. The end-point of the electrolysis, at which the current is stopped, must be determined either from the inflection point in the E–t curve or by using visual or objective end-point indi- cation, similar to volumetric methods. The total electric charge is calculated as the product of the constant current and time of electrolysis or can be measured directly using a coulometer. - The advantage of this method is that the electric charge consumed during the electrode reaction is directly proportional to the electrolysis time. Care must be taken to avoid the potential region where another electrode reaction may occur. - coulometry at an imposed, constant current in the electrochemical cell - DirectCoulometryAtControlledCurrent - coulometry at an imposed, constant current in the electrochemical cell + + + + + ExchangeIntegral + constituent of the interaction energy between the spins of adjacent electrons in matter arising from the overlap of electron state functions + ExchangeIntegral + https://qudt.org/vocab/quantitykind/ExchangeIntegral + https://www.wikidata.org/wiki/Q10882959 + 12-34 + constituent of the interaction energy between the spins of adjacent electrons in matter arising from the overlap of electron state functions - - - - - MathematicalFormula - A mathematical string that express a relation between the elements in one set X to elements in another set Y. - The set X is called domain and the set Y range or codomain. - MathematicalFormula - A mathematical string that express a relation between the elements in one set X to elements in another set Y. + + + + Mathematical + A mathematical object in this branch is not representing a concept but an actual graphical object built using mathematcal symbols arranged in some way, according to math conventions. + The class of general mathematical symbolic objects respecting mathematical syntactic rules. + Mathematical + The class of general mathematical symbolic objects respecting mathematical syntactic rules. - - - - MaterialsProcessing - A manufacturing process aimed to modify the precursor objects through a physical process (involving other materials, energy, manipulation) to change its material properties. - A material process requires the output to be classified as an individual of a material subclass. - ContinuumManufacturing - MaterialsProcessing - A manufacturing process aimed to modify the precursor objects through a physical process (involving other materials, energy, manipulation) to change its material properties. - Synthesis of materials, quenching, the preparation of a cake, tempering of a steel beam. - A material process requires the output to be classified as an individual of a material subclass. + + + + PhaseHomogeneousMixture + A single phase mixture. + PhaseHomogeneousMixture + A single phase mixture. - - - - - Simulation - A estimation of a property using a functional icon. - Modelling - Simulation - A estimation of a property using a functional icon. - I calculate the electrical conductivity of an Ar-He plasma with the Chapman-Enskog method and use the value as property for it. + + + + Mixture + A Miixture is a material made up of two or more different substances which are physically (not chemically) combined. + Mixture + A Miixture is a material made up of two or more different substances which are physically (not chemically) combined. - - - - Computation - A procedure that deals with quantitative symbols (i.e. symbols associated with a quantitative oriented language). - Computation - A procedure that deals with quantitative symbols (i.e. symbols associated with a quantitative oriented language). - A matematician that calculates 2+2. -A computation machine that calculate the average value of a dataset. - + + + + + + + 1 + + + + + + + 1 + + + + QuantityValue + A quantity value is not necessarily a property, since it is possible to write "10 kg", without assigning this quantity to a specific object. + A symbolic that has parts a numerical object and a reference expressing the value of a quantity (expressed as the product of the numerical and the unit). + Following the International Vocabulary of Metrology (VIM), EMMO distinguishes between a quantity (a property) and the quantity value (a numerical and a reference). + +So, for the EMMO the symbol "kg" is not a physical quantity but simply a 'Symbolic' object categorized as a 'MeasurementUnit'. - - - - - NuclidicMass - Rest mass of a nuclide X in the ground state. - NuclidicMass - https://www.wikidata.org/wiki/Q97010809 - 10-4.2 - Rest mass of a nuclide X in the ground state. - https://doi.org/10.1351/goldbook.N04258 +While the string "1 kg" is a 'QuantityValue'. + QuantityValue + A symbolic that has parts a numerical object and a reference expressing the value of a quantity (expressed as the product of the numerical and the unit). + 6.8 m +0.9 km +8 K +6 MeV +43.5 HRC(150 kg) + quantity value + A quantity value is not necessarily a property, since it is possible to write "10 kg", without assigning this quantity to a specific object. - + - - - RestMass - For particle X, mass of that particle at rest in an inertial frame. - InvariantMass - ProperMass - RestMass - https://qudt.org/vocab/quantitykind/RestMass - https://www.wikidata.org/wiki/Q96941619 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-03 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-04-16 - https://dbpedia.org/page/Mass_in_special_relativity - 10-2 - For particle X, mass of that particle at rest in an inertial frame. - https://en.wikipedia.org/wiki/Invariant_mass - - - - - - AnodicStrippingVoltammetry - - A peak-shaped anodic stripping voltammogram is obtained. Peak current depends on time of accumulation, mass transport of analyte (stirring), scan rate and mode (linear or pulse), and analyte concentration in solution. - A solid electrode, carbon paste or composite electrode, bismuth film electrode, mercury film electrode, or static mercury drop electrode may be used. - Stripping voltammetry in which material accumulated at the working electrode is electrochemically oxi- dized in the stripping step. - AnodicStrippingVoltammetry - https://www.wikidata.org/wiki/Q939328 - Stripping voltammetry in which material accumulated at the working electrode is electrochemically oxi- dized in the stripping step. - https://doi.org/10.1515/pac-2018-0109 + + Numerical + A 'Mathematical' that has no unknown value, i.e. all its 'Variable"-s parts refers to a 'Number' (for scalars that have a built-in datatype) or to another 'Numerical' (for complex numerical data structures that should rely on external implementations). + Numerical + A 'Mathematical' that has no unknown value, i.e. all its 'Variable"-s parts refers to a 'Number' (for scalars that have a built-in datatype) or to another 'Numerical' (for complex numerical data structures that should rely on external implementations). - + - - - VacuumMagneticPermeability - The DBpedia and UIPAC Gold Book definitions (http://dbpedia.org/page/Vacuum_permeability, https://doi.org/10.1351/goldbook.P04504) are outdated since May 20, 2019. It is now a measured constant. - The value of magnetic permeability in a classical vacuum. - PermeabilityOfVacuum - VacuumMagneticPermeability - http://qudt.org/vocab/constant/ElectromagneticPermeabilityOfVacuum - 6-26.1 + + + AtomicScatteringFactor + Quotient of radiation amplitude scattered by the atom and radiation amplitude scattered by a single electron. + AtomicScatteringFactor + https://qudt.org/vocab/quantitykind/AtomScatteringFactor + https://www.wikidata.org/wiki/Q837866 + 12-5.3 + Quotient of radiation amplitude scattered by the atom and radiation amplitude scattered by a single electron. + https://en.wikipedia.org/wiki/Atomic_form_factor - + - + - Permeability - Measure for how the magnetization of material is affected by the application of an external magnetic field . - ElectromagneticPermeability - Permeability - http://qudt.org/vocab/quantitykind/ElectromagneticPermeability - 6-26.2 - https://doi.org/10.1351/goldbook.P04503 - - - - - - - Behaviour - A process which is an holistic temporal part of an object. - Behaviour - A process which is an holistic temporal part of an object. - Accelerating is a behaviour of a car. - + ElectricConductivity + Measure of a material's ability to conduct an electric current. - - - - AreaFractionUnit - Unit for quantities of dimension one that are the fraction of two areas. - AreaFractionUnit - Unit for quantities of dimension one that are the fraction of two areas. - Unit for solid angle. +Conductivity is equeal to the resiprocal of resistivity. + Conductivity + ElectricConductivity + http://qudt.org/vocab/quantitykind/ElectricConductivity + https://www.wikidata.org/wiki/Q4593291 + 6-43 + https://doi.org/10.1351/goldbook.C01245 - - + + - - - - - - + + ∇ - Cogniser - An interpreter who establish the connection between an icon an an object recognizing their resemblance (e.g. logical, pictorial) - Cogniser - An interpreter who establish the connection between an icon an an object recognizing their resemblance (e.g. logical, pictorial) - The scientist that connects an equation to a physical phenomenon. + + Gradient + Gradient - - - - - LatticePlaneSpacing - distance between successive lattice planes - LatticePlaneSpacing - https://qudt.org/vocab/quantitykind/LatticePlaneSpacing - https://www.wikidata.org/wiki/Q105488046 - 12-3 - distance between successive lattice planes + + + + Language + A language object is a discrete data entity respecting a specific language syntactic rules (a well-formed formula). + Language + A language object is a discrete data entity respecting a specific language syntactic rules (a well-formed formula). - + - Distance - Distance is the norm of Displacement. - Shortest path length between two points in a metric space. - Distance - https://qudt.org/vocab/quantitykind/Distance - https://www.wikidata.org/wiki/Q126017 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=102-03-24 - https://dbpedia.org/page/Distance - 3-1.8 - Shortest path length between two points in a metric space. - https://en.wikipedia.org/wiki/Distance + Thickness + Shortest distance between two surfaces limiting a layer, when this distance can be considered to be constant over a region of a finite size. + Thickness + https://www.wikidata.org/wiki/Q3589038 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-01-24 + 3-1.4 + Shortest distance between two surfaces limiting a layer, when this distance can be considered to be constant over a region of a finite size. - - + + + + Pressing + A collective term for the processes in which, during joining, the parts to be joined and any auxiliary parts are essentially only elastically deformed and unintentional loosening is prevented by frictional connection. + Anpressen + Pressing + + + + - - - + + - - Minus - Minus + + AffinityOfAChemicalReaction + Describes elements' or compounds' readiness to form bonds. + ChemicalAffinity + AffinityOfAChemicalReaction + https://qudt.org/vocab/quantitykind/ChemicalAffinity + https://www.wikidata.org/wiki/Q382783 + 9-30 + Describes elements' or compounds' readiness to form bonds. + https://doi.org/10.1351/goldbook.A00178 + + + + + Declared + A semantic object that is connected to a conventional sign by an interpreter (a declarer) according to a specific convention. + Declared + A semantic object that is connected to a conventional sign by an interpreter (a declarer) according to a specific convention. + + + + + Description + A coded that is not atomic with respect to a code of description. + A description is a collection of properties that depicts an object. It is not atomic since it is made of several properties collected together. + Description + A coded that is not atomic with respect to a code of description. + A biography. + A sentence about some object, depticting its properties. + A description is a collection of properties that depicts an object. It is not atomic since it is made of several properties collected together. + + + + + + SpecialUnit + A unit symbol that stands for a derived unit. + Special units are semiotic shortcuts to more complex composed symbolic objects. + SpecialUnit + A unit symbol that stands for a derived unit. + Pa stands for N/m2 +J stands for N m + + + + + DerivedUnit + A measurement unit for a derived quantity. +-- VIM + Derived units are defined as products of powers of the base units corresponding to the relations defining the derived quantities in terms of the base quantities. + DerivedUnit + Derived units are defined as products of powers of the base units corresponding to the relations defining the derived quantities in terms of the base quantities. + derived unit + A measurement unit for a derived quantity. +-- VIM - - - - ArithmeticOperator - ArithmeticOperator + + + + + + + + + + + + Fundamental + A whole that represent the overall lifetime of the world object that represents according to some holistic criteria. + Lifetime + Maximal + Fundamental + A whole that represent the overall lifetime of the world object that represents according to some holistic criteria. + A marathon is an example of class whose individuals are always maximal since the criteria satisfied by a marathon 4D entity poses some constraints on its temporal and spatial extent. + +On the contrary, the class for a generic running process does not necessarily impose maximality to its individuals. A running individual is maximal only when it extends in time for the minimum amount required to identify a running act, so every possible temporal part is always a non-running. + +Following the two examples, a marathon individual is a maximal that can be decomposed into running intervals. The marathon class is a subclass of running. - - - - - LeakageFactor - One minus the square of the coupling factor - LeakageFactor - https://www.wikidata.org/wiki/Q78102042 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-42 - 6-42.2 - One minus the square of the coupling factor + + + + + + + + + + + + Redundant + A whole possessing some proper parts of its same type. + NonMaximal + Redundant + A whole possessing some proper parts of its same type. + An object A which is classified as water-fluid possesses a proper part B which is water itself if the lenght scale of the B is larger than the water intermolecular distance keeping it in the continuum range. In this sense, A is redundant. + +If A is a water-fluid so small that its every proper part is no more a continuum object (i.e. no more a fluid), then A is fundamental. - - - - - AbsoluteActivity - The exponential of the ratio of the chemical potential to R*T where R is the gas constant and T the thermodynamic temperature. - AbsoluteActivity - https://qudt.org/vocab/quantitykind/AbsoluteActivity - https://www.wikidata.org/wiki/Q56638155 - 9-18 - The exponential of the ratio of the chemical potential to R*T where R is the gas constant and T the thermodynamic temperature. - https://goldbook.iupac.org/terms/view/A00019 + + + ElectronNeutrino + A neutrino belonging to the first generation of leptons. + ElectronNeutrino + A neutrino belonging to the first generation of leptons. + https://en.wikipedia.org/wiki/Electron_neutrino - + - - Heat - Heat is energy in transfer to or from a thermodynamic system, by mechanisms other than thermodynamic work or transfer of matter. - AmountOfHeat - Heat - http://qudt.org/vocab/quantitykind/Heat - 5-6.1 - https://doi.org/10.1351/goldbook.H02752 + + + + + + + + + SlowingDownDensity + Number of slowed-down particles per time and volume. + SlowingDownDensity + https://qudt.org/vocab/quantitykind/Slowing-DownDensity + https://www.wikidata.org/wiki/Q98915830 + 10-67 + Number of slowed-down particles per time and volume. - + - - Detector - - Physical device (or the chain of devices) that is used to measure, quantify and store the signal after its interaction with the sample. - Detector - Physical device (or the chain of devices) that is used to measure, quantify and store the signal after its interaction with the sample. - Back Scattered Electrons (BSE) and Secondary Electrons (SE) detectors for SEM - Displacement and force sensors for mechanical testing + + CompressionTesting + Compression tests characterize material and product strength and stiffness under applied crushing loads. These tests are typically conducted by applying compressive pressure to a test specimen using platens or specialized fixtures with a testing machine that produces compressive loads. + CompressionTesting + Compression tests characterize material and product strength and stiffness under applied crushing loads. These tests are typically conducted by applying compressive pressure to a test specimen using platens or specialized fixtures with a testing machine that produces compressive loads. - - - - ConfocalMicroscopy - - Confocal microscopy, most frequently confocal laser scanning microscopy (CLSM) or laser scanning confocal microscopy (LSCM), is an optical imaging technique for increasing optical resolution and contrast of a micrograph by means of using a spatial pinhole to block out-of-focus light in image formation. - ConfocalMicroscopy - Confocal microscopy, most frequently confocal laser scanning microscopy (CLSM) or laser scanning confocal microscopy (LSCM), is an optical imaging technique for increasing optical resolution and contrast of a micrograph by means of using a spatial pinhole to block out-of-focus light in image formation. + + + + Riveting + Riveting - - - - Microscopy - - Microscopy is a category of characterization techniques which probe and map the surface and sub-surface structure of a material. These techniques can use photons, electrons, ions or physical cantilever probes to gather data about a sample's structure on a range of length scales. - Microscopy - Microscopy is a category of characterization techniques which probe and map the surface and sub-surface structure of a material. These techniques can use photons, electrons, ions or physical cantilever probes to gather data about a sample's structure on a range of length scales. + + + + FormingJoin + FormingJoin - - - - - LossAngle - Arctan of the loss factor - LossAngle - https://www.qudt.org/vocab/quantitykind/LossAngle - https://www.wikidata.org/wiki/Q20820438 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-49 - 6-55 - Arctan of the loss factor + + + + + + Hypothesis + A hypothesis is a theory, estimated and objective, since its estimated premises are objective. + Hypothesis + A hypothesis is a theory, estimated and objective, since its estimated premises are objective. - - - - Strain - Change of the relative positions of parts of a body, excluding a displacement of the body as a whole. - Strain - http://qudt.org/vocab/quantitykind/Strain - 4-17.1 - Change of the relative positions of parts of a body, excluding a displacement of the body as a whole. - + + + Objective + A coded conventional that is determined by each interpeter following a well defined determination procedure through a specific perception channel. + The word objective does not mean that each observation will provide the same results. It means that the observation followed a well defined procedure. - - - - - RollingResistanceFactor - Quotient of tangential and normal component of the force applied to a body which is rolling at constant speed over a surface. - RollingResistanceFactor - https://www.wikidata.org/wiki/Q91738044 - 4-23.3 - Quotient of tangential and normal component of the force applied to a body which is rolling at constant speed over a surface. +This class refers to what is commonly known as physical property, i.e. a measurable property of physical system, whether is quantifiable or not. + Objective + A coded conventional that is determined by each interpeter following a well defined determination procedure through a specific perception channel. - - - - CalibrationDataPostProcessing - Post-processing of the output of the calibration in order to get the actual calibration data to be used as input for the measurement. - CalibrationDataPostProcessing - Post-processing of the output of the calibration in order to get the actual calibration data to be used as input for the measurement. - + + + + Theory + A 'conventional' that stand for a 'physical'. + The 'theory' is e.g. a proposition, a book or a paper whose sub-symbols suggest in the mind of the interpreter an interpretant structure that can represent a 'physical'. - - - - DataPostProcessing - Analysis, that allows one to calculate the final material property from the calibrated primary data. - DataPostProcessing - Analysis, that allows one to calculate the final material property from the calibrated primary data. - +It is not an 'icon' (like a math equation), because it has no common resemblance or logical structure with the 'physical'. - - - - Java - Java +In Peirce semiotics: legisign-symbol-argument + Theory + A 'conventional' that stand for a 'physical'. - - - - CompiledLanguage - CompiledLanguage + + + Estimated + Estimated + The biography of a person that the author have not met. - - - Photon - The class of individuals that stand for photons elementary particles. - Photon - The class of individuals that stand for photons elementary particles. - https://en.wikipedia.org/wiki/Photon + + + + + + + + + + + SeebeckCoefficient + Measure of voltage induced by change of temperature. + SeebeckCoefficient + https://qudt.org/vocab/quantitykind/SeebeckCoefficient + https://www.wikidata.org/wiki/Q1091448 + 12-21 + Measure of voltage induced by change of temperature. - + - - - FermiTemperature - in the free electron model, the Fermi energy divided by the Boltzmann constant - FermiTemperature - https://qudt.org/vocab/quantitykind/FermiTemperature - https://www.wikidata.org/wiki/Q105942324 - 12-28 - in the free electron model, the Fermi energy divided by the Boltzmann constant + + + + + + + + ReciprocalVolume + ReciprocalVolume - - - - Crystal - A material is a crystal if it has essentially a sharp diffraction pattern. - -A solid is a crystal if it has essentially a sharp diffraction pattern. The word essentially means that most of the intensity of the diffraction is concentrated in relatively sharp Bragg peaks, besides the always present diffuse scattering. In all cases, the positions of the diffraction peaks can be expressed by - - -H=∑ni=1hia∗i (n≥3) - Crystal - A material is a crystal if it has essentially a sharp diffraction pattern. - -A solid is a crystal if it has essentially a sharp diffraction pattern. The word essentially means that most of the intensity of the diffraction is concentrated in relatively sharp Bragg peaks, besides the always present diffuse scattering. In all cases, the positions of the diffraction peaks can be expressed by + + + + + AverageEnergyLossPerElementaryChargeProduced + Quotient of the initial kinetic energy Ek of an ionizing charged particle and the total ionization Ni produced by that particle. + AverageEnergyLossPerElementaryChargeProduced + https://qudt.org/vocab/quantitykind/AverageEnergyLossPerElementaryChargeProduced + https://www.wikidata.org/wiki/Q98793042 + 10-60 + Quotient of the initial kinetic energy Ek of an ionizing charged particle and the total ionization Ni produced by that particle. + + + + + + NonLeakageProbability + Probability that a neutron will not escape from the reactor during the slowing-down process or while it diffuses as a thermal neutron. + NonLeakageProbability + https://qudt.org/vocab/quantitykind/Non-LeakageProbability + https://www.wikidata.org/wiki/Q99415566 + 10-77 + Probability that a neutron will not escape from the reactor during the slowing-down process or while it diffuses as a thermal neutron. + -H=∑ni=1hia∗i (n≥3) + + + + LiquidAerosol + An aerosol composed of liquid droplets in air or another gas. + LiquidAerosol + An aerosol composed of liquid droplets in air or another gas. - - - CrystallineMaterial - Suggestion of Rickard Armiento - CrystallineMaterial + + + + + Aerosol + A colloid composed of fine solid particles or liquid droplets in air or another gas. + Aerosol + A colloid composed of fine solid particles or liquid droplets in air or another gas. - - - - CyclicVoltammetry - - Cyclic voltammetry is frequently used for the investigation of mechanisms of electrochemi- cal/electrode reactions. The current-potential curve may be modelled to obtain reaction mechanisms and electrochemical parameters. - Normally the initial potential is chosen where no electrode reaction occurs and the switch- ing potential is greater (more positive for an oxidation or more negative for a reduction) than the peak potential of the analyte reaction. - The initial potential is usually the negative or positive limit of the cycle but can have any value between the two limits, as can the initial scan direction. The limits of the potential are known as the switching potentials. - The plot of current against potential is termed a cyclic voltammogram. Usually peak-shaped responses are obtained for scans in both directions. - voltammetry in which the electric current is recorded as the electrode potential is varied with time cycli- cally between two potential limits, normally at a constant scan rate - CV - CyclicVoltammetry - https://www.wikidata.org/wiki/Q1147647 - https://dbpedia.org/page/Cyclic_voltammetry - voltammetry in which the electric current is recorded as the electrode potential is varied with time cycli- cally between two potential limits, normally at a constant scan rate - https://en.wikipedia.org/wiki/Cyclic_voltammetry - https://doi.org/10.1515/pac-2018-0109 + + + NonEncodedData + Data that occurs naturally without an encoding agent producing it. + This is a really broad class that gathers all physical phenomena in which a variation occurs naturally. + EnvironmentalData + NonEncodedData + Data that occurs naturally without an encoding agent producing it. + A cloud in the sky. The radiative spectrum of a star. + This is a really broad class that gathers all physical phenomena in which a variation occurs naturally. - - - - ReactiveMaterial - A material that takes active part in a chemical reaction. - ReactiveMaterial - A material that takes active part in a chemical reaction. + + + GreenTopAntiQuark + GreenTopAntiQuark - - - - ChemicallyDefinedMaterial - ChemicallyDefinedMaterial + + + + + Stage + A process which is an holistic temporal part of a process. + Stage + A process which is an holistic temporal part of a process. + Moving a leg is a stage of the process of running. - - - - DirectCurrentInternalResistance - - method of determining the internal resistance of an electrochemical cell by applying a low current followed by higher current within a short period, and then record the changes of battery voltage and current - DirectCurrentInternalResistance - method of determining the internal resistance of an electrochemical cell by applying a low current followed by higher current within a short period, and then record the changes of battery voltage and current + + + TemporalRole + An holistic temporal part of a whole. + HolisticTemporalPart + TemporalRole + An holistic temporal part of a whole. - - - - Chronopotentiometry - - The change in applied current is usually a step, but cyclic current reversals or linearly increasing currents are also used. - potentiometry in which the potential is measured with time following a change in applied current - Chronopotentiometry - potentiometry in which the potential is measured with time following a change in applied current - https://doi.org/10.1515/pac-2018-0109 + + + + FromWorkPIecetoWorkPiece + FromWorkPIecetoWorkPiece - - - - - - - - - - - - - MetrologicalReference - A reference can be a measurement unit, a measurement procedure, a reference material, or a combination of such (VIM3 1.1 NOTE 2). - A symbolic is recognized as reference unit also if it is not part of a quantity (e.g. as in the sentence "the Bq is the reference unit of Becquerel"). -For this reason we can't declare the axiom: -MetrologicalReference SubClassOf: inverse(hasMetrologicalReference) some Quantity -because there exist reference units without being part of a quantity. -This is peculiar to EMMO, where quantities as syntatic entities (explicit quantities) are distinct with quantities as semantic entities (properties). - MetrologicalReference - A reference can be a measurement unit, a measurement procedure, a reference material, or a combination of such (VIM3 1.1 NOTE 2). - A symbolic is recognized as reference unit also if it is not part of a quantity (e.g. as in the sentence "the Bq is the reference unit of Becquerel"). -For this reason we can't declare the axiom: -MetrologicalReference SubClassOf: inverse(hasMetrologicalReference) some Quantity -because there exist reference units without being part of a quantity. -This is peculiar to EMMO, where quantities as syntatic entities (explicit quantities) are distinct with quantities as semantic entities (properties). + + + + WorkpieceForming + A manufacturing in which it is formed a solid body with its shape from shapeless original material parts, whose cohesion is created during the process. + ArchetypeForming + PrimitiveForming + WorkpieceForming - + - + - - KermaRate - Time derivative of kerma. - KermaRate - https://qudt.org/vocab/quantitykind/KermaRate - https://www.wikidata.org/wiki/Q99713105 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-12-28 - 10-86.2 - Time derivative of kerma. - - - - - - Plasma - A fluid in which a gas is ionized to a level where its electrical conductivity allows long-range electric and magnetic fields to dominate its behaviour. - Plasma - A fluid in which a gas is ionized to a level where its electrical conductivity allows long-range electric and magnetic fields to dominate its behaviour. - - - - - GreenBottomQuark - GreenBottomQuark + + LorenzCoefficient + Quotient of thermal conductivity, and the product of electric conductivity and thermodynamic temperature. + LorenzNumber + LorenzCoefficient + https://qudt.org/vocab/quantitykind/LorenzCoefficient + https://www.wikidata.org/wiki/Q105728754 + 12-18 + Quotient of thermal conductivity, and the product of electric conductivity and thermodynamic temperature. - - - BlueDownAntiQuark - BlueDownAntiQuark + + + + + MixingRatio + Ratio of the mass of water vapour to the mass of dry air in a given volume of air. + The mixing ratio at saturation is denoted xsat. + MassRatioOfWaterVapourToDryGas + MixingRatio + https://www.wikidata.org/wiki/Q76378940 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-62 + 5-30 + Ratio of the mass of water vapour to the mass of dry air in a given volume of air. - + - - + - - T+2 L0 M0 I0 Θ0 N0 J0 + + - - SquareTimeUnit - SquareTimeUnit + + + + + ElectricResistivity + Electric field strength divided by the current density. + Resistivity + ElectricResistivity + http://qudt.org/vocab/quantitykind/Resistivity + https://www.wikidata.org/wiki/Q108193 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-12-04 + 6-44 + https://doi.org/10.1351/goldbook.R05316 - - - - Unknown - The dependent variable for which an equation has been written. - Unknown - The dependent variable for which an equation has been written. - Velocity, for the Navier-Stokes equation. + + + + + Extensive + A quantity whose magnitude is additive for subsystems. + Note that not all physical quantities can be categorised as being either intensive or extensive. For example the square root of the mass. + Extensive + A quantity whose magnitude is additive for subsystems. + Mass +Volume +Entropy - - - - NumericalVariable - A variable standing for a numerical defined mathematical object like e.g. a number, a vector of numbers, a matrix of numbers. - NumericalVariable - A variable standing for a numerical defined mathematical object like e.g. a number, a vector of numbers, a matrix of numbers. + + + + HardeningByRolling + Strengthening by rolling is the strengthening of component surfaces by mechanically generating compressive stresses in the component surface and consolidating the material. + VerfestigendurchWalzen + HardeningByRolling + Strengthening by rolling is the strengthening of component surfaces by mechanically generating compressive stresses in the component surface and consolidating the material. - - - - ReferenceSample - - Material, sufficiently homogeneous and stable with reference to one or more specified properties, which has been established to be fit for its intended use in measurement or in examination -NOTE 1 Reference materials can be certified reference materials or reference materials without a certified property -value. -NOTE 2 For a reference material to be used as a measurement standard for calibration purposes it needs to be a certified reference material. -NOTE 3 Reference materials can be used for measurement precision evaluation and quality control. -EXAMPLE Human serum without an assigned quantity value for the amount-of-substance concentration of the inherent cholesterol, used for quality control. -NOTE 4 Properties of reference materials can be quantities or nominal properties. -NOTE 5 A reference material is sometimes incorporated into a specially fabricated device. -EXAMPLE Spheres of uniform size mounted on a microscope slide. -NOTE 6 Some reference materials have assigned values in a unit outside the SI. Such materials include vaccines to -which International Units (IU) have been assigned by the World Health Organization. -NOTE 7 A given reference material can only be used for one purpose in a measurement, either calibration or quality -control, but not both. -NOTE 8 ISO/REMCO has an analogous definition but uses the term “measurement process” (ISO Guide 30, Reference -materials – Selected terms and definitions, definition 2.1.1) for both measurement and examination. - --- International Vocabulary of Metrology(VIM) - Material, sufficiently homogeneous and stable with respect to one or more specified properties, which has been established to be fit for its intended use in a measurement process”. - ReferenceSpecimen - Certified Reference Material - Reference material - ReferenceSample - Material, sufficiently homogeneous and stable with reference to one or more specified properties, which has been established to be fit for its intended use in measurement or in examination -NOTE 1 Reference materials can be certified reference materials or reference materials without a certified property -value. -NOTE 2 For a reference material to be used as a measurement standard for calibration purposes it needs to be a certified reference material. -NOTE 3 Reference materials can be used for measurement precision evaluation and quality control. -EXAMPLE Human serum without an assigned quantity value for the amount-of-substance concentration of the inherent cholesterol, used for quality control. -NOTE 4 Properties of reference materials can be quantities or nominal properties. -NOTE 5 A reference material is sometimes incorporated into a specially fabricated device. -EXAMPLE Spheres of uniform size mounted on a microscope slide. -NOTE 6 Some reference materials have assigned values in a unit outside the SI. Such materials include vaccines to -which International Units (IU) have been assigned by the World Health Organization. -NOTE 7 A given reference material can only be used for one purpose in a measurement, either calibration or quality -control, but not both. -NOTE 8 ISO/REMCO has an analogous definition but uses the term “measurement process” (ISO Guide 30, Reference -materials – Selected terms and definitions, definition 2.1.1) for both measurement and examination. - --- International Vocabulary of Metrology(VIM) - Quality control sample used to determine accuracy and precision of method. [ISO 17858:2007] - Material, sufficiently homogeneous and stable with respect to one or more specified properties, which has been established to be fit for its intended use in a measurement process”. - Reference material + + + + HardeningByForming + Verfestigen durch Umformen + HardeningByForming - - + + + - Sample - - Sample and Specime are often used interchangeably. However in some cases the term Specimen is used to specify a portion taken under conditions such that the sampling variability cannot be assessed (usually because the population is changing), and is assumed, for convenience, to be zero. - Portion of material selected from a larger quantity of material. The term needs to be qualified, e.g., bulk sample, representative sample, primary sample, bulked sample, test sample, etc. The term 'sample' implies the existence of a sampling error, i.e., the results obtained on the portions taken are only estimates of the concentration of a constituent or the quantity of a property present in the parent material. If there is no or negligible sampling error, the portion removed is a test portion, aliquot, or specimen. - Specimen - Sample - Portion of material selected from a larger quantity of material. The term needs to be qualified, e.g., bulk sample, representative sample, primary sample, bulked sample, test sample, etc. The term 'sample' implies the existence of a sampling error, i.e., the results obtained on the portions taken are only estimates of the concentration of a constituent or the quantity of a property present in the parent material. If there is no or negligible sampling error, the portion removed is a test portion, aliquot, or specimen. - Sample and Specime are often used interchangeably. However in some cases the term Specimen is used to specify a portion taken under conditions such that the sampling variability cannot be assessed (usually because the population is changing), and is assumed, for convenience, to be zero. + ManufacturedProduct + An object that has been designed and manufactured for a particular purpose. + Artifact + Engineered + TangibleProduct + ManufacturedProduct + An object that has been designed and manufactured for a particular purpose. + Car, tire, composite material. - - - ClassicalData - Data that are expressed through classical physics mechanisms, having one value and one state, and being in the same place at the same time. - ClassicalData - Data that are expressed through classical physics mechanisms, having one value and one state, and being in the same place at the same time. + + + FunctionalIcon + An icon that focusing WHAT the object does. + An icon that imitates one representative character of the object. It share external similarities with the object, but not necessarily the same internal logical structure. + This subclass of icon inspired by Peirceian category (c) the metaphor, which represents the representative character of a sign by representing a parallelism in something else. + FunctionalIcon + An icon that imitates one representative character of the object. It share external similarities with the object, but not necessarily the same internal logical structure. + A data based model is only a functional icon, since it provide the same relations between the properties of the object (e.g., it can predict some properties as function of others) but is not considering the internal mechanisms (i.e., it can ignore the physics). + A guinea pig. + An icon that focusing WHAT the object does. - - - - - - - - - - - - - - - - - - - UpQuarkType - UpQuarkType + + + + Agent + A participant that is the driver of the process. + An agent is not necessarily human. +An agent plays an active role within the process. +An agent is a participant of a process that would not occur without it. + Agent + A participant that is the driver of the process. + A catalyst. A bus driver. A substance that is initiating a reaction that would not occur without its presence. + An agent is not necessarily human. +An agent plays an active role within the process. +An agent is a participant of a process that would not occur without it. - - - - - RawData - - Direct output of the equipment with the manufacturer’s software including automatic pre-processing that is not modified by the user once the acquisition method is defined and the equipment calibrated. - In some cases, raw data can be considered to have already some level of data processing, e.g., in electron microscopy a “raw image” that is formed on the screen is already result from multiple processing after the signal is acquired by the detector. - RawData - Direct output of the equipment with the manufacturer’s software including automatic pre-processing that is not modified by the user once the acquisition method is defined and the equipment calibrated. - The raw data is a set of (unprocessed) data that is given directly as output from the detector, usually expressed as a function of time or position, or photon energy. - In mechanical testing, examples of raw data are raw-force, raw-displacement, coordinates as function of time. - In spectroscopic testing, the raw data are light intensity, or refractive index, or optical absorption as a function of the energy (or wavelength) of the incident light beam. - In some cases, raw data can be considered to have already some level of data processing, e.g., in electron microscopy a “raw image” that is formed on the screen is already result from multiple processing after the signal is acquired by the detector. + + + + + Participant + An object which is an holistic spatial part of a process. + Participant + An object which is an holistic spatial part of a process. + A student during an examination. - + - + + - - + + T-3 L-3 M+1 I0 Θ0 N0 J0 - - - - - SecondPolarMomentOfArea - SecondPolarMomentOfArea - https://qudt.org/vocab/quantitykind/SecondPolarMomentOfArea - https://www.wikidata.org/wiki/Q1049636 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-30 - 4-21.2 + + PowerPerAreaVolumeUnit + PowerPerAreaVolumeUnit - + - + + - - + + T0 L+3 M-1 I0 Θ0 N0 J0 - - - - SecondAxialMomentOfArea - SecondAxialMomentOfArea - https://qudt.org/vocab/quantitykind/SecondAxialMomentOfArea - https://www.wikidata.org/wiki/Q91405496 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-29 - 4-21.1 + + VolumePerMassUnit + VolumePerMassUnit - - - - ScanningKelvinProbe - - Scanning Kelvin probe (SKP) and scanning Kelvin probe force microscopy (SKPFM) are probe techniques which permit mapping of topography and Volta potential distribution on electrode surfaces. It measures the surface electrical potential of a sample without requiring an actual physical contact. - SKB - ScanningKelvinProbe - Scanning Kelvin probe (SKP) and scanning Kelvin probe force microscopy (SKPFM) are probe techniques which permit mapping of topography and Volta potential distribution on electrode surfaces. It measures the surface electrical potential of a sample without requiring an actual physical contact. + + + + Dismantling + action to disassemble a product or a component by removing all or some of its constituent parts with the intent to salvage + Demontage + Dismantling + action to disassemble a product or a component by removing all or some of its constituent parts with the intent to salvage + + + + + + + + + T0 L+5 M0 I0 Θ0 N0 J0 + + + SectionAreaIntegralUnit + SectionAreaIntegralUnit - + + - + - + - - - - - - - - - - - - - - - - - + + - BlueQuark - BlueQuark + AntiNeutrinoType + AntiNeutrinoType - - - - Homonuclear - A molecule composed of only one element type. - ElementalMolecule - Homonuclear - A molecule composed of only one element type. - Hydrogen molecule (H₂). + + + RightHandedParticle + RightHandedParticle - - - - - - - - - - - - - - - - - - - - - - - - - - - Molecule - An atom_based state defined by an exact number of e-bonded atomic species and an electron cloud made of the shared electrons. - An entity is called essential if removing one direct part will lead to a change in entity class. -An entity is called redundand if removing one direct part will not lead to a change in entity class. - ChemicalSubstance - Molecule - An atom_based state defined by an exact number of e-bonded atomic species and an electron cloud made of the shared electrons. - H₂0, C₆H₁₂O₆, CH₄ - An entity is called essential if removing one direct part will lead to a change in entity class. -An entity is called redundand if removing one direct part will not lead to a change in entity class. - This definition states that this object is a non-periodic set of atoms or a set with a finite periodicity. -Removing an atom from the state will result in another type of atom_based state. -e.g. you cannot remove H from H₂0 without changing the molecule type (essential). However, you can remove a C from a nanotube (redundant). C60 fullerene is a molecule, since it has a finite periodicity and is made of a well defined number of atoms (essential). A C nanotube is not a molecule, since it has an infinite periodicity (redundant). + + + + + + AngularMeasure + The abstract notion of angle. + AngularMeasure + https://qudt.org/vocab/quantitykind/Angle + https://www.wikidata.org/wiki/Q1357788 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=102-04-14 + 3-5 + The abstract notion of angle. + https://doi.org/10.1351/goldbook.A00346 - - - - Numerical - A 'Mathematical' that has no unknown value, i.e. all its 'Variable"-s parts refers to a 'Number' (for scalars that have a built-in datatype) or to another 'Numerical' (for complex numerical data structures that should rely on external implementations). - Numerical - A 'Mathematical' that has no unknown value, i.e. all its 'Variable"-s parts refers to a 'Number' (for scalars that have a built-in datatype) or to another 'Numerical' (for complex numerical data structures that should rely on external implementations). + + + ElementaryFermion + ElementaryFermion - + - T-2 L+4 M+1 I0 Θ0 N0 J0 + T-6 L+4 M+2 I-2 Θ0 N0 J0 - EnergyAreaUnit - EnergyAreaUnit - - - - - - - - - - - - - MassExcess - Difference between the mass of an atom, and the product of its mass number and the unified mass constant. - MassExcess - https://qudt.org/vocab/quantitykind/MassExcess - https://www.wikidata.org/wiki/Q1571163 - 10-21.1 - Difference between the mass of an atom, and the product of its mass number and the unified mass constant. - https://doi.org/10.1351/goldbook.M03719 - - - - - - - AtomicScatteringFactor - Quotient of radiation amplitude scattered by the atom and radiation amplitude scattered by a single electron. - AtomicScatteringFactor - https://qudt.org/vocab/quantitykind/AtomScatteringFactor - https://www.wikidata.org/wiki/Q837866 - 12-5.3 - Quotient of radiation amplitude scattered by the atom and radiation amplitude scattered by a single electron. - https://en.wikipedia.org/wiki/Atomic_form_factor + LorenzNumberUnit + LorenzNumberUnit - - - - - BetaDisintegrationEnergy - Sum of the maximum beta-particle kinetic energy and the recoil energy of the atom produced in a reference frame in which the emitting nucleus is at rest before its disintegration. - BetaDisintegrationEnergy - https://www.wikidata.org/wiki/Q98148340 - 10-34 - Sum of the maximum beta-particle kinetic energy and the recoil energy of the atom produced in a reference frame in which the emitting nucleus is at rest before its disintegration. - + + + + Arrangement + A causal object which is tessellated with only spatial direct parts. + The definition of an arrangement implies that its spatial direct parts are not gained or lost during its temporal extension (they exist from the left to the right side of the time interval), so that the cardinality of spatial direct parts in an arrangement is constant. +This does not mean that there cannot be a change in the internal structure of the arrangement direct parts. It means only that this change must not affect the existence of the direct part itself. + The use of spatial direct parthood in state definition means that an arrangement cannot overlap in space another arrangement that is direct part of the same whole. + MereologicalState + Arrangement + A causal object which is tessellated with only spatial direct parts. + e.g. the existent in my glass is declared at t = t_start as made of two direct parts: the ice and the water. It will continue to exists as state as long as the ice is completely melt at t = t_end. The new state will be completely made of water. Between t_start and t_end there is an exchange of molecules between the ice and the water, but this does not affect the existence of the two states. - - - - - SpecificEnergyImparted - In nuclear physics, energy imparted per mass. - SpecificEnergyImparted - https://qudt.org/vocab/quantitykind/SpecificEnergyImparted - https://www.wikidata.org/wiki/Q99566195 - 10-81.2 - In nuclear physics, energy imparted per mass. +If we partition the existent in my glass as ice surrounded by several molecules (we do not use the object water as direct part) then the appearance of a molecule coming from the ice will cause a state to end and another state to begin. - - - - - - - - - - - - SpecificEnergy - Energy per unit mass - SpecificEnergy - https://qudt.org/vocab/quantitykind/SpecificEnergy - https://www.wikidata.org/wiki/Q3023293 - https://dbpedia.org/page/Specific_energy - 5-21.1 - Energy per unit mass - https://en.wikipedia.org/wiki/Specific_energy + + + + + Service + IntangibleProduct + Service + https://www.iso.org/obp/ui/#iso:std:iso:9000:ed-4:v1:en:term:3.7.7 - - - - Electrogravimetry - - method of electroanalytical chemistry used to separate by electrolyse ions of a substance and to derive the amount of this substance from the increase in mass of an electrode. - Electrogravimetry - https://www.wikidata.org/wiki/Q902953 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-04-14 - method of electroanalytical chemistry used to separate by electrolyse ions of a substance and to derive the amount of this substance from the increase in mass of an electrode. - https://en.wikipedia.org/wiki/Electrogravimetry + + + + + + + + + + + + Product + The overall lifetime of an holistic that has been the output of an intentional process. + This concepts encompass the overall lifetime of a product. +Is temporaly fundamental, meaning that it can have other products as holistic spatial parts, but its holistic temporal parts are not products. In other words, the individual must encompass the whole lifetime from creation to disposal. +A product can be a tangible object (e.g. a manufactured object), a process (e.g. service). It can be the outcome of a natural or an artificially driven process. +It must have and initial stage of its life that is also an outcome of a intentional process. + Output + Product + https://www.iso.org/obp/ui/#iso:std:iso:9000:ed-3:v1:en:term:3.4.2 + https://www.iso.org/obp/ui/#iso:std:iso:14040:ed-2:v1:en:term:3.9 + The overall lifetime of an holistic that has been the output of an intentional process. + This concepts encompass the overall lifetime of a product. +Is temporaly fundamental, meaning that it can have other products as holistic spatial parts, but its holistic temporal parts are not products. In other words, the individual must encompass the whole lifetime from creation to disposal. +A product can be a tangible object (e.g. a manufactured object), a process (e.g. service). It can be the outcome of a natural or an artificially driven process. +It must have and initial stage of its life that is also an outcome of a intentional process. - + + + + + + + + + + IntentionalProcess + A process occurring with the active participation of an agent that drives the process according to a specific objective (intention). + Project + IntentionalProcess + A process occurring with the active participation of an agent that drives the process according to a specific objective (intention). + + + - - RotationalFrequency - Magnitude of the angular velocity ω divided by the angle 2π, thus n = |ω|/2π. - RotationalFrequency - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-01-42 - 3-17.2 - Magnitude of the angular velocity ω divided by the angle 2π, thus n = |ω|/2π. + + + + + + + + + MagnetomotiveForce + Scalar line integral of the magnetic field strength along a closed path. + MagnetomotiveForce + https://qudt.org/vocab/quantitykind/MagnetomotiveForce + https://www.wikidata.org/wiki/Q1266982 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-60 + 6-37.3 + Scalar line integral of the magnetic field strength along a closed path. - + - T-1 L-3 M+1 I0 Θ0 N0 J0 + T0 L-1 M0 I0 Θ+1 N0 J0 - MassPerVolumeTimeUnit - MassPerVolumeTimeUnit - - - - - - - Gyroradius - Radius of the circular movement of an electrically charged particle in a magnetic field. - LarmorRadius - Gyroradius - https://www.wikidata.org/wiki/Q1194458 - 10-17 - Radius of the circular movement of an electrically charged particle in a magnetic field. - - - - - - Radius - Distance from the centre of a circle to the circumference. - Radius - https://qudt.org/vocab/quantitykind/Radius - https://www.wikidata.org/wiki/Q173817 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-01-25 - https://dbpedia.org/page/Radius - 3-1.6 - Distance from the centre of a circle to the circumference. - https://en.wikipedia.org/wiki/Radius - - - - - AnalogData - Data that are decoded retaining its continuous variations characteristic. - The fact that there may be a finite granularity in the variations of the material basis (e.g. the smallest peak in a vynil that can be recognized by the piezo-electric transducer) does not prevent a data to be analog. It means only that the focus on such data encoding is on a scale that makes such variations negligible, making them practically a continuum. - AnalogData - Data that are decoded retaining its continuous variations characteristic. - A vynil contain continuous information about the recorded sound. - The fact that there may be a finite granularity in the variations of the material basis (e.g. the smallest peak in a vynil that can be recognized by the piezo-electric transducer) does not prevent a data to be analog. It means only that the focus on such data encoding is on a scale that makes such variations negligible, making them practically a continuum. + TemperaturePerLengthUnit + TemperaturePerLengthUnit - + - + - - Molality - quotient of the amount of substance nB of solute B by the mass m of the solvent: bB = nB / m. - AmountPerMass - Molality - https://www.wikidata.org/wiki/Q172623 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-01-19 - 9-15 - quotient of the amount of substance nB of solute B by the mass m of the solvent: bB = nB / m. - https://doi.org/10.1351/goldbook.M03970 + + + EnergyDensityOfStates + Quantity in condensed matter physics. + EnergyDensityOfStates + https://qudt.org/vocab/quantitykind/EnergyDensityOfStates + https://www.wikidata.org/wiki/Q105687031 + 12-16 + Quantity in condensed matter physics. - - + + - - + + - - Existent - 'Existent' is the EMMO class to be used for representing real world physical objects under a reductionistic perspective (i.e. objects come from the composition of sub-part objects, both in time and space). - -'Existent' class collects all individuals that stand for physical objects that can be structured in well defined temporal sub-parts called states, through the temporal direct parthood relation. - -This class provides a first granularity hierarchy in time, and a way to axiomatize tessellation principles for a specific whole with a non-transitivity relation (direct parthood) that helps to retain the granularity levels. - -e.g. a car, a supersaturated gas with nucleating nanoparticles, an atom that becomes ionized and then recombines with an electron. - A 'Physical' which is a tessellation of 'State' temporal direct parts. - An 'Existent' individual stands for a real world object for which the ontologist wants to provide univocal tessellation in time. - -By definition, the tiles are represented by 'State'-s individual. + + + DensityOfVibrationalStates + quotient of the number of vibrational modes in an infinitesimal interval of angular frequency, and the product of the width of that interval and volume + DensityOfVibrationalStates + https://qudt.org/vocab/quantitykind/DensityOfStates + https://www.wikidata.org/wiki/Q105637294 + 12-12 + quotient of the number of vibrational modes in an infinitesimal interval of angular frequency, and the product of the width of that interval and volume + -Tiles are related to the 'Existent' through temporal direct parthood, enforcing non-transitivity and inverse-functionality. - Being hasTemporalDirectPart a proper parthood relation, there cannot be 'Existent' made of a single 'State'. + + + + DataBasedSimulationSoftware + A computational application that uses existing data to predict the behaviour of a system without providing a identifiable analogy with the original object. + DataBasedSimulationSoftware + A computational application that uses existing data to predict the behaviour of a system without providing a identifiable analogy with the original object. + -Moreover, due to inverse functionality, a 'State' can be part of only one 'Existent', preventing overlapping between 'Existent'-s. - true - Existent - A 'Physical' which is a tessellation of 'State' temporal direct parts. + + + + + SimulationApplication + An application aimed to functionally reproduce an object. + SimulationApplication + An application aimed to functionally reproduce an object. + An application that predicts the pressure drop of a fluid in a pipe segment is aimed to functionally reproduce the outcome of a measurement of pressure before and after the segment. - + - + - - JouleThomsonCoefficient - JouleThomsonCoefficient - https://www.wikidata.org/wiki/Q93946998 - 5-24 + + SectionModulus + SectionModulus + https://qudt.org/vocab/quantitykind/SectionModulus + https://www.wikidata.org/wiki/Q1930808 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-31 + 4-22 + + + + + + + + + + + + + SolidMixture + SolidMixture @@ -9406,536 +7840,619 @@ Moreover, due to inverse functionality, a 'State' can be part of only one 'Exist Someone who deduces the occurring of a physical phenomenon through other phenomena. - - - - CharacterisationProcedureValidation - - Describes why the characterization procedure was chosen and deemed to be the most useful for the sample. - CharacterisationProcedureValidation - Describes why the characterization procedure was chosen and deemed to be the most useful for the sample. - - - - - - NominalProperty - "Property of a phenomenon, body, or substance, where the property has no magnitude." - -"A nominal property has a value, which can be expressed in words, by alphanumerical codes, or by other means." - -International vocabulary of metrology (VIM) - An 'ObjectiveProperty' that cannot be quantified. - NominalProperty - An 'ObjectiveProperty' that cannot be quantified. - CFC is a 'sign' that stands for the fact that the morphology of atoms composing the microstructure of an entity is predominantly Cubic Face Centered - -A color is a nominal property. - -Sex of a human being. - nominal property - - - - - - - ConstitutiveProcess - A constitutive process is a process that is holistically relevant for the definition of the whole. - A process which is an holistic spatial part of an object. - ConstitutiveProcess - A process which is an holistic spatial part of an object. - Blood circulation in a human body. - A constitutive process is a process that is holistically relevant for the definition of the whole. + + + AntiMuon + AntiMuon - - - - Sawing - Cutting with circular or straight cutting motion, using a multi-toothed tool of small cutting width, the cutting motion being performed by the tool - Process of cutting a workpiece into smaller parts that are either doughter parts, samples (e.g. for testing) or scrap. - Sägen - Sawing - Process of cutting a workpiece into smaller parts that are either doughter parts, samples (e.g. for testing) or scrap. + + + + PrimaryData + + Data resulting of a pre-processing of raw data, applying corrections to normalize/harmonize, in order to prepare them for the post-processing. + PrimaryData + Data resulting of a pre-processing of raw data, applying corrections to normalize/harmonize, in order to prepare them for the post-processing. + Baseline subtraction + Noise reduction + X and Y axes correction - - - - Machining - A manufacturing in which material is removed from the workpiece in the form of chips. - RemovingChipsFromWorkpiece - Machining - A manufacturing in which material is removed from the workpiece in the form of chips. + + + + CharacterisationData + Represents every type of data that is produced during a characterisation process + CharacterisationData + Represents every type of data that is produced during a characterisation process - + - - - ElectronAffinity - energy difference between an electron at rest at infinity and an electron at the lowest level of the conduction band in an insulator or semiconductor - ElectronAffinity - https://qudt.org/vocab/quantitykind/ElectronAffinity - https://www.wikidata.org/wiki/Q105846486 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-06-22 - 12-25 - energy difference between an electron at rest at infinity and an electron at the lowest level of the conduction band in an insulator or semiconductor + + + RelativeVolumeStrain + Quotient of change of volume and original volume. + BulkStrain + VolumeStrain + RelativeVolumeStrain + https://qudt.org/vocab/quantitykind/VolumeStrain + https://www.wikidata.org/wiki/Q73432507 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-60 + 4-17.4 + Quotient of change of volume and original volume. + https://doi.org/10.1351/goldbook.V06648 - - - - - - - - - - - - - - - - - FirstGenerationFermion - FirstGenerationFermion + + + + HolisticArrangement + A system which is mainly characterised by the spatial configuration of its elements. + HolisticArrangement + A system which is mainly characterised by the spatial configuration of its elements. - - - - - - - - - - - - - - - - - - - - NeutrinoType - An elementary particle with spin 1/2 that interacts only via the weak interaction and gravity. - NeutrinoType - An elementary particle with spin 1/2 that interacts only via the weak interaction and gravity. - https://en.wikipedia.org/wiki/Neutrino + + + + + + + + + HolisticSystem + A system is conceived as an aggregate of things that 'work' (or interact) together. While a system extends in time through distinct temporal parts (like every other 4D object), this elucdation focuses on a timescale in which the obejct shows a persistence in time. + An object that is made of a set of sub objects working together as parts of a mechanism or an interconnecting network (natural or artificial); a complex whole. + HolisticSystem + An object that is made of a set of sub objects working together as parts of a mechanism or an interconnecting network (natural or artificial); a complex whole. - - - LeftHandedParticle - LeftHandedParticle + + + + + NuclearPrecessionAngularFrequency + Frequency by which the nucleus angular momentum vector precesses about the axis of an external magnetic field. + NuclearPrecessionAngularFrequency + https://www.wikidata.org/wiki/Q97641779 + 10-15.3 + Frequency by which the nucleus angular momentum vector precesses about the axis of an external magnetic field. - + - + - - ElectricResistivity - Electric field strength divided by the current density. - Resistivity - ElectricResistivity - http://qudt.org/vocab/quantitykind/Resistivity - https://www.wikidata.org/wiki/Q108193 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-12-04 - 6-44 - https://doi.org/10.1351/goldbook.R05316 + Force + Any interaction that, when unopposed, will change the motion of an object + Force + http://qudt.org/vocab/quantitykind/Force + 4-9.1 + Any interaction that, when unopposed, will change the motion of an object + https://doi.org/10.1351/goldbook.F02480 - + - - CharacterisationSoftware + + + + + + + + + PhysicsOfInteraction - A software application to process characterisation data - CharacterisationSoftware - A software application to process characterisation data - In Nanoindentation post-processing the software used to apply the Oliver-Pharr to calculate the characterisation properties (i.e. elastic modulus, hardness) from load and depth data. + Set of physics principles (and associated governing equations) that describes the interaction between the sample and the probe. + PhysicsOfInteraction + Set of physics principles (and associated governing equations) that describes the interaction between the sample and the probe. + In x-ray diffraction, this is represented by the set of physics equations that describe the relation between the incident x-ray beam and the diffracted beam (the most simple form for this being the Bragg’s law). - - - - ApplicationProgram - A program aimed to provide a specific high level function to the user, usually hiding lower level procedures. - App - Application - ApplicationProgram - A program aimed to provide a specific high level function to the user, usually hiding lower level procedures. - Word processors, graphic image processing programs, database management systems, numerical simulation software and games. + + + + SampleInspection + + Analysis of the sample in order to determine information that are relevant for the characterisation method. + SampleInspection + Analysis of the sample in order to determine information that are relevant for the characterisation method. + In the Nanoindentation method the Scanning Electron Microscope to determine the indentation area. - - + + + + SampleInspectionParameter + + Parameter used for the sample inspection process + SampleInspectionParameter + Parameter used for the sample inspection process + + + + - - + + + + + + - - - DoseEquivalent - A dose quantity used in the International Commission on Radiological Protection (ICRP) system of radiological protection. - DoseEquivalent - http://qudt.org/vocab/quantitykind/DoseEquivalent - 10-83.1 - A dose quantity used in the International Commission on Radiological Protection (ICRP) system of radiological protection. - https://doi.org/10.1351/goldbook.E02101 + + CharacterisationMeasurementTask + Used to break-down a CharacterisationMeasurementProcess into his specific tasks. + CharacterisationMeasurementTask + Used to break-down a CharacterisationMeasurementProcess into his specific tasks. + + + + + + + + + + + + + + + + + + + + + + + + CharacterisationTask + + CharacterisationTask + + + + + + + RybergConstant + The Rydberg constant represents the limiting value of the highest wavenumber (the inverse wavelength) of any photon that can be emitted from the hydrogen atom, or, alternatively, the wavenumber of the lowest-energy photon capable of ionizing the hydrogen atom from its ground state. + RybergConstant + http://qudt.org/vocab/constant/RydbergConstant + https://doi.org/10.1351/goldbook.R05430 - - - - - - - - - HolisticSystem - A system is conceived as an aggregate of things that 'work' (or interact) together. While a system extends in time through distinct temporal parts (like every other 4D object), this elucdation focuses on a timescale in which the obejct shows a persistence in time. - An object that is made of a set of sub objects working together as parts of a mechanism or an interconnecting network (natural or artificial); a complex whole. - HolisticSystem - An object that is made of a set of sub objects working together as parts of a mechanism or an interconnecting network (natural or artificial); a complex whole. + + + + Wavenumber + The number of waves per unit length along the direction of propagation. + Wavenumber + http://qudt.org/vocab/quantitykind/Wavenumber + 3-18 + https://doi.org/10.1351/goldbook.W06664 - + - - - - - - - - - BurgersVector - Vector characterising a dislocation in a crystal lattice. - BurgersVector - https://qudt.org/vocab/quantitykind/BurgersVector - https://www.wikidata.org/wiki/Q623093 - 12-6 - Vector characterising a dislocation in a crystal lattice. + + + MassConcentrationOfWater + Quotient of the mass of water in a three-dimensional domain, irrespective of the form of aggregation, by the volume of the domain. + The mass concentration of water at saturation is denoted wsat. + MassConcentrationOfWater + https://qudt.org/vocab/quantitykind/MassConcentrationOfWater + https://www.wikidata.org/wiki/Q76378758 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-59 + 5-27 + Quotient of the mass of water in a three-dimensional domain, irrespective of the form of aggregation, by the volume of the domain. - + - - Displacement - vector quantity between any two points in space - Displacement - https://qudt.org/vocab/quantitykind/Displacement - https://www.wikidata.org/wiki/Q190291 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-01-29 - https://dbpedia.org/page/Displacement_(geometry) - 3-1.11 - vector quantity between any two points in space - https://en.wikipedia.org/wiki/Displacement_(geometry) + + + MassConcentration + Mass of a constituent divided by the volume of the mixture. + MassConcentration + http://qudt.org/vocab/quantitykind/MassConcentration + https://doi.org/10.1351/goldbook.M03713 - - - AntiTau - AntiTau + + + + SparkErosion + A manufacturing process in which metallic material is anodically dissolved under the influence of an electric current and an electrolyte solution. The current flow can be caused either by connection to an external current source or due to local element formation on the workpiece (etching). + elektrochemisches Abtragen + SparkErosion - + - - DeepFreezing - Treatment carried out after hardening or case hardening consisting of cooling to a temperature below room temperature to complete the transformation of austenite to martensite - Cryogenic treatment, Deep-freeze - Tieftemperaturbehandeln - DeepFreezing - Treatment carried out after hardening or case hardening consisting of cooling to a temperature below room temperature to complete the transformation of austenite to martensite + + Ablation + Manufacturing by separating particles of material from a solid body by non-mechanical means. Ablation refers both to the removal of layers of material and to the separation of workpiece parts. The production process of ablation is considered in its stationary instantaneous state, independently of the application of auxiliary processes necessary to initiate the process. Ablation is divided into three subgroups according to the order point of view (OGP) "process in the effective zone on the surface of the workpiece": - thermal ablation; - chemical ablation; - electrochemical ablation. + Abtragen + Ablation - + - TauAntiNeutrino - TauAntiNeutrino - - - - - - FormingFromPowder - FormingFromPowder + + + + + + + + + + + + + + + + + AntiElectronType + AntiElectronType - + - - - ElectrolyticConductivity - ElectrolyticConductivity - https://qudt.org/vocab/quantitykind/ElectrolyticConductivity - https://www.wikidata.org/wiki/Q907564 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-01-03 - 9-44 + + Enthalpy + Measurement of energy in a thermodynamic system. + Enthalpy + http://qudt.org/vocab/quantitykind/Enthalpy + 5.20-3 + https://doi.org/10.1351/goldbook.E02141 - - - - - - - - - - - - ElectricConductivity - Measure of a material's ability to conduct an electric current. + + + + PhaseOfMatter + A matter object throughout which all physical properties of a material are essentially uniform. + In the physical sciences, a phase is a region of space (a thermodynamic system), throughout which all physical properties of a material are essentially uniform. Examples of physical properties include density, index of refraction, magnetization and chemical composition. A simple description is that a phase is a region of material that is chemically uniform, physically distinct, and (often) mechanically separable. In a system consisting of ice and water in a glass jar, the ice cubes are one phase, the water is a second phase, and the humid air is a third phase over the ice and water. The glass of the jar is another separate phase. -Conductivity is equeal to the resiprocal of resistivity. - Conductivity - ElectricConductivity - http://qudt.org/vocab/quantitykind/ElectricConductivity - https://www.wikidata.org/wiki/Q4593291 - 6-43 - https://doi.org/10.1351/goldbook.C01245 - +The term phase is sometimes used as a synonym for state of matter, but there can be several immiscible phases of the same state of matter. Also, the term phase is sometimes used to refer to a set of equilibrium states demarcated in terms of state variables such as pressure and temperature by a phase boundary on a phase diagram. Because phase boundaries relate to changes in the organization of matter, such as a change from liquid to solid or a more subtle change from one crystal structure to another, this latter usage is similar to the use of "phase" as a synonym for state of matter. However, the state of matter and phase diagram usages are not commensurate with the formal definition given above and the intended meaning must be determined in part from the context in which the term is used. + Phase + PhaseOfMatter + A matter object throughout which all physical properties of a material are essentially uniform. + In the physical sciences, a phase is a region of space (a thermodynamic system), throughout which all physical properties of a material are essentially uniform. Examples of physical properties include density, index of refraction, magnetization and chemical composition. A simple description is that a phase is a region of material that is chemically uniform, physically distinct, and (often) mechanically separable. In a system consisting of ice and water in a glass jar, the ice cubes are one phase, the water is a second phase, and the humid air is a third phase over the ice and water. The glass of the jar is another separate phase. - - - - CurrentLinkage - For a closed path, scalar quantity equal to the electric current through any surface bounded by the path. - CurrentLinkage - https://qudt.org/vocab/quantitykind/CurrentLinkage - https://www.wikidata.org/wiki/Q77995703 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-46 - 6-37.4 - For a closed path, scalar quantity equal to the electric current through any surface bounded by the path. +The term phase is sometimes used as a synonym for state of matter, but there can be several immiscible phases of the same state of matter. Also, the term phase is sometimes used to refer to a set of equilibrium states demarcated in terms of state variables such as pressure and temperature by a phase boundary on a phase diagram. Because phase boundaries relate to changes in the organization of matter, such as a change from liquid to solid or a more subtle change from one crystal structure to another, this latter usage is similar to the use of "phase" as a synonym for state of matter. However, the state of matter and phase diagram usages are not commensurate with the formal definition given above and the intended meaning must be determined in part from the context in which the term is used. - - - - - - - T0 L0 M0 I0 Θ+1 N0 J0 - - - TemperatureUnit - TemperatureUnit + + + ContinuumSubstance + A continuum is made of a sufficient number of parts that it continues to exists as continuum individual even after the loss of one of them i.e. a continuum is a redundant. + A state that is a collection of sufficiently large number of other parts such that: +- it is the bearer of qualities that can exists only by the fact that it is a sum of parts +- the smallest partition dV of the state volume in which we are interested in, contains enough parts to be statistically consistent: n [#/m3] x dV [m3] >> 1 + ContinuumSubstance + A state that is a collection of sufficiently large number of other parts such that: +- it is the bearer of qualities that can exists only by the fact that it is a sum of parts +- the smallest partition dV of the state volume in which we are interested in, contains enough parts to be statistically consistent: n [#/m3] x dV [m3] >> 1 + A continuum is made of a sufficient number of parts that it continues to exists as continuum individual even after the loss of one of them i.e. a continuum is a redundant. + A continuum is not necessarily small (i.e. composed by the minimum amount of sates to fulfill the definition). + +A single continuum individual can be the whole fluid in a pipe. + A continuum is the bearer of properties that are generated by the interactions of parts such as viscosity and thermal or electrical conductivity. - - - - - - - - - - - - Program - A program is a sequence of instructions understandable by a computer's central processing unit (CPU) that indicates which operations the computer should perform on a set of data. - A set of instructions that tell a computer what to do. - Executable - Program - A set of instructions that tell a computer what to do. - A program is a sequence of instructions understandable by a computer's central processing unit (CPU) that indicates which operations the computer should perform on a set of data. + + + + + HalfLife + Mean duration required for the decay of one half of the atoms or nuclei. + HalfLife + https://qudt.org/vocab/quantitykind/Half-Life + https://www.wikidata.org/wiki/Q98118544 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-12 + 10-31 + Mean duration required for the decay of one half of the atoms or nuclei. - - - - Software - All or part of the programs, procedures, rules, and associated documentation of an information processing system. - Software is usually used as a generic term for programs. However, in its broadest sense it can refer to all information (i.e., both programs and data) in electronic form and can provide a distinction from hardware, which refers to computers or other electronic systems on which software can exist and be use. -Here we explicitly include in the definition also all the data (e.g. source code, script files) that takes part to the building of the executable, are necessary to the execution of a program or that document it for the users. - Software - All or part of the programs, procedures, rules, and associated documentation of an information processing system. - Software is usually used as a generic term for programs. However, in its broadest sense it can refer to all information (i.e., both programs and data) in electronic form and can provide a distinction from hardware, which refers to computers or other electronic systems on which software can exist and be use. -Here we explicitly include in the definition also all the data (e.g. source code, script files) that takes part to the building of the executable, are necessary to the execution of a program or that document it for the users. + + + + + DewPointTemperature + The corresponding Celsius temperature is denoted td and is also called dew point. + Thermodynamic temperature at which vapour in air reaches saturation. + DewPointTemperature + https://www.wikidata.org/wiki/Q178828 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-67 + 5-36 + Thermodynamic temperature at which vapour in air reaches saturation. + https://doi.org/10.1351/goldbook.D01652 - + - - - - - - + + - - NumberOfElements - Number of direct parts of a Reductionistic. - Using direct parthood EMMO creates a well-defined broadcasting between granularity levels. This also make it possible to count the direct parts of each granularity level. - NumberOfElements - Number of direct parts of a Reductionistic. + + + ThermodynamicTemperature + Thermodynamic temperature is the absolute measure of temperature. It is defined by the third law of thermodynamics in which the theoretically lowest temperature is the null or zero point. + ThermodynamicTemperature + http://qudt.org/vocab/quantitykind/ThermodynamicTemperature + 5-1 + Thermodynamic temperature is the absolute measure of temperature. It is defined by the third law of thermodynamics in which the theoretically lowest temperature is the null or zero point. + https://doi.org/10.1351/goldbook.T06321 - + - + - - - SeebeckCoefficient - Measure of voltage induced by change of temperature. - SeebeckCoefficient - https://qudt.org/vocab/quantitykind/SeebeckCoefficient - https://www.wikidata.org/wiki/Q1091448 - 12-21 - Measure of voltage induced by change of temperature. - - - - - - - - EndTile - EndTile - - - - - - Language - A language object is a discrete data entity respecting a specific language syntactic rules (a well-formed formula). - Language - A language object is a discrete data entity respecting a specific language syntactic rules (a well-formed formula). + + SolubilityProduct + For the dissociation of a salt AmBn → mA + nB, the solubility product is KSP = am(A) ⋅ an(B), where a is ionic activity and m and n are the stoichiometric numbers. + product of the ion activities of the ions resulting from the dissociation of a solute in a saturated solution, raised to powers equal to their stoichiometric numbers. + SolubilityProductConstant + SolubilityProduct + https://www.wikidata.org/wiki/Q11229788 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-01-23 + product of the ion activities of the ions resulting from the dissociation of a solute in a saturated solution, raised to powers equal to their stoichiometric numbers. + https://doi.org/10.1351/goldbook.S05742 - - - - - - - T0 L-1 M0 I+1 Θ0 N0 J0 - - - MagneticFieldStrengthUnit - MagneticFieldStrengthUnit + + + + + EquilibriumConstant + The physical dimension can change based on the stoichiometric numbers of the substances involved. + for solutions, product for all substances B of concentration c_B of substance B in power of its stoichiometric number v_B: K_p = \sum_B{c_B^{v_B}}. + EquilibriumConstantConcentrationBasis + EquilibriumConstant + https://qudt.org/vocab/quantitykind/EquilibriumConstant + https://www.wikidata.org/wiki/Q857809 + for solutions, product for all substances B of concentration c_B of substance B in power of its stoichiometric number v_B: K_p = \sum_B{c_B^{v_B}}. + https://en.wikipedia.org/wiki/Equilibrium_constant + https://doi.org/10.1351/goldbook.E02177 - - - - Namer - An interpreter who assigns a name to an object without any motivations related to the object characters. - Namer - An interpreter who assigns a name to an object without any motivations related to the object characters. + + + + SurfaceDensityOfElectricCharge + The derivative of the electric charge of a system with respect to the area. + AreicElectricCharge + SurfaceChargeDensity + SurfaceDensityOfElectricCharge + https://www.wikidata.org/wiki/Q12799324 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-08 + 6-4 + The derivative of the electric charge of a system with respect to the area. + https://doi.org/10.1351/goldbook.S06159 - + - + - - - RelativePressureCoefficient - RelativePressureCoefficient - https://qudt.org/vocab/quantitykind/RelativePressureCoefficient - https://www.wikidata.org/wiki/Q74761852 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-30 - 5-3.3 + + ElectricFluxDensity + Vector quantity obtained at a given point by adding the electric polarization P to the product of the electric field strength E and the electric constant ε0. + ElectricDisplacement + ElectricFluxDensity + https://qudt.org/vocab/quantitykind/ElectricDisplacementField + https://www.wikidata.org/wiki/Q371907 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-40 + 6-12 + Vector quantity obtained at a given point by adding the electric polarization P to the product of the electric field strength E and the electric constant ε0. - + - + + + IonicStrength + Charge number is a quantity of dimension one defined in ChargeNumber. + For all types of ions in a solution, half the sum of the products of their molality b_i and the square of their charge number z_i. + IonicStrength + https://qudt.org/vocab/quantitykind/IonicStrength + https://www.wikidata.org/wiki/Q898396 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-01-24 + 9-42 + For all types of ions in a solution, half the sum of the products of their molality b_i and the square of their charge number z_i. + https://doi.org/10.1351/goldbook.I03180 + + + + + + FreezingPointDepressionOsmometry + + The general principle of freezing point depression osmometry involves the relationship between the number of moles of dissolved solute in a solution and the change in freezing point. + FreezingPointDepressionOsmometry + The general principle of freezing point depression osmometry involves the relationship between the number of moles of dissolved solute in a solution and the change in freezing point. + + + + + + Osmometry + + Osmometry is an advanced analytical method for determining the osmotic concentration of solutions. The osmotic – or solute – concentration of a colloidal system is expressed in osmoles (Osm) per unit of volume (Osm/L) or weight (Osm/kg). + Osmometry + Osmometry is an advanced analytical method for determining the osmotic concentration of solutions. The osmotic – or solute – concentration of a colloidal system is expressed in osmoles (Osm) per unit of volume (Osm/L) or weight (Osm/kg). + + + + + DimensionalUnit + A subclass of measurement unit focusing on the physical dimensionality that is carried by the unit. + The current version of EMMO does not provide explicit classes for physical dimensions. Rather it embraces the fact that the physical dimensionality of a physical quantity is carried by its measurement unit. + +The role of dimensional unit and its subclasses is to express the physical dimensionality that is carried by the unit. + +Since the dimensionality of a physical quantity can be written as the product of powers of the physical dimensions of the base quantities in the selected system of quantities, the physical dimensionality of a measurement unit is uniquely determined by the exponents. For a dimensional unit, at least one of these exponents must be non-zero (making it disjoint from dimensionless units). + DimensionalUnit + A subclass of measurement unit focusing on the physical dimensionality that is carried by the unit. + The current version of EMMO does not provide explicit classes for physical dimensions. Rather it embraces the fact that the physical dimensionality of a physical quantity is carried by its measurement unit. + +The role of dimensional unit and its subclasses is to express the physical dimensionality that is carried by the unit. + +Since the dimensionality of a physical quantity can be written as the product of powers of the physical dimensions of the base quantities in the selected system of quantities, the physical dimensionality of a measurement unit is uniquely determined by the exponents. For a dimensional unit, at least one of these exponents must be non-zero (making it disjoint from dimensionless units). + + + + - PressureCoefficient - Change of pressure per change of temperature at constant volume. - PressureCoefficient - https://qudt.org/vocab/quantitykind/PressureCoefficient - https://www.wikidata.org/wiki/Q74762732 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-29 - 5-4 - Change of pressure per change of temperature at constant volume. + + + RelativeHumidity + Ratio of the partial pressure p of water vapour in moist air to its partial pressure psat at saturation, at the same temperature φ = p/psat. + The relative humidity is often expressed in per cent. + RelativeHumidity + https://qudt.org/vocab/quantitykind/RelativeHumidity + https://www.wikidata.org/wiki/Q2499617 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-65 + 5-33 + Ratio of the partial pressure p of water vapour in moist air to its partial pressure psat at saturation, at the same temperature φ = p/psat. + https://en.wikipedia.org/wiki/Humidity#Relative_humidity + + + + + + + RelativeMassConcentrationOfWaterVapour + For normal cases, the relative humidity may be assumed to be equal to relative mass concentration of vapour. + ratio of the mass concentration of water vapour v to its mass concentration at saturation vsat, at the same temperature, thus ψ = v/vsat. + RelativeMassConcentrationOfWaterVapour + https://qudt.org/vocab/quantitykind/RelativeMassConcentrationOfVapour + https://www.wikidata.org/wiki/Q76379357 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-66 + ratio of the mass concentration of water vapour v to its mass concentration at saturation vsat, at the same temperature, thus ψ = v/vsat. + + + + + + + + + T-2 L0 M+1 I0 Θ0 N0 J0 + + + ForcePerLengthUnit + ForcePerLengthUnit + + + + + + + DisplacementVector + In condensed matter physics, position vector of an atom or ion relative to its equilibrium position. + DisplacementVector + https://qudt.org/vocab/quantitykind/DisplacementVectorOfIon + https://www.wikidata.org/wiki/Q105533558 + 12-7.3 + In condensed matter physics, position vector of an atom or ion relative to its equilibrium position. - - - - - - - T-1 L+1 M0 I0 Θ0 N0 J0 - - - SpeedUnit - SpeedUnit + + + + + + + + + + + + + + + + + + + + + + + + + CausalSystem + A causal system provides the most general concept of system, being a union of causal structures interacting together. In its most simple form, a causal system is an interlacement of causal paths (the most simple structure type). + A non-path causal structure + CausalSystem + A causal system provides the most general concept of system, being a union of causal structures interacting together. In its most simple form, a causal system is an interlacement of causal paths (the most simple structure type). + A non-path causal structure + A electron binded by a nucleus. - + - - - - - - - - EnergyDistributionOfCrossSection - Differential quotient of the cross section for a process and the energy of the scattered particle. - EnergyDistributionOfCrossSection - https://qudt.org/vocab/quantitykind/SpectralCrossSection - https://www.wikidata.org/wiki/Q98267245 - 10-40 - Differential quotient of the cross section for a process and the energy of the scattered particle. + + NeutronYieldPerAbsorption + Average number of fission neutrons, both prompt and delayed, emitted per neutron absorbed in a fissionable nuclide or in a nuclear fuel, as specified. + NeutronYieldPerAbsorption + https://qudt.org/vocab/quantitykind/NeutronYieldPerAbsorption + https://www.wikidata.org/wiki/Q99159075 + 10-74.2 + Average number of fission neutrons, both prompt and delayed, emitted per neutron absorbed in a fissionable nuclide or in a nuclear fuel, as specified. - + - PhaseVelocity - For a sinusoidal wave at a given point, velocity in the direction of propagation of the wavefront corresponding to a specified phase. - PhaseSpeed - PhaseVelocity - https://www.wikidata.org/wiki/Q13824 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-10-13 - https://dbpedia.org/page/Phase_velocity - 3-23.1 - For a sinusoidal wave at a given point, velocity in the direction of propagation of the wavefront corresponding to a specified phase. - https://en.wikipedia.org/wiki/Phase_velocity + GroupVelocity + Speed with which the envelope of a wave propagates in space. + GroupSpeed + GroupVelocity + https://www.wikidata.org/wiki/Q217361 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-10-15 + https://dbpedia.org/page/Group_velocity + 3-23.2 + Speed with which the envelope of a wave propagates in space. + https://en.wikipedia.org/wiki/Group_velocity @@ -9971,1507 +8488,1845 @@ Here we explicitly include in the definition also all the data (e.g. source code 3‑10.1 - - - - - - - - - - - MagneticFlux - Measure of magnetism, taking account of the strength and the extent of a magnetic field. - MagneticFlux - http://qudt.org/vocab/quantitykind/MagneticFlux - https://www.wikidata.org/wiki/Q177831 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-21 - https://dbpedia.org/page/Magnetic_flux - 6-22.1 - Measure of magnetism, taking account of the strength and the extent of a magnetic field. - https://en.wikipedia.org/wiki/Magnetic_flux - https://doi.org/10.1351/goldbook.M03684 - - - - - - - - - - - - - BohrMagneton - Magnitude of the magnetic moment of an electron in a state with orbital angular momentum quantum number l=1 due to its orbital motion. - BohrMagneton - https://www.wikidata.org/wiki/Q737120 - 10-9.2 - Magnitude of the magnetic moment of an electron in a state with orbital angular momentum quantum number l=1 due to its orbital motion. - - - - - - - - - - - - - - - JunctionTile - A direct part that is obtained by partitioning a whole hybridly in spatial, temporal and spatiotemporal parts. - JunctionTile - A direct part that is obtained by partitioning a whole hybridly in spatial, temporal and spatiotemporal parts. + + + + PulsedElectroacousticMethod + + The pulsed electroacoustic (PEA) method is an established method for space charge measurements in polymeric dielectrics. + PulsedElectroacousticMethod + The pulsed electroacoustic (PEA) method is an established method for space charge measurements in polymeric dielectrics. + https://doi.org/10.1007/s10832-023-00332-y - - - - Python - Python + + + + ChargeDistribution + + ChargeDistribution - - - - ScriptingLanguage - A programming language that is executed through runtime interpretation. - ScriptingLanguage - A programming language that is executed through runtime interpretation. + + + + + MigrationArea + Sum of the slowing-down area from fission energy to thermal energy and the diffusion area for thermal neutrons. + MigrationArea + https://qudt.org/vocab/quantitykind/MigrationArea + https://www.wikidata.org/wiki/Q98966325 + 10-72.3 + Sum of the slowing-down area from fission energy to thermal energy and the diffusion area for thermal neutrons. - + - + + - - MagneticDipoleMoment - For an atom or nucleus, this energy is quantized and can be written as: - - W = g μ M B - -where g is the appropriate g factor, μ is mostly the Bohr magneton or nuclear magneton, M is magnetic quantum number, and B is magnitude of the magnetic flux density. - --- ISO 80000 - Vector quantity μ causing a change to its energy ΔW in an external magnetic field of field flux density B: + + Area + Extent of a surface. + Area + http://qudt.org/vocab/quantitykind/Area + 3-3 + https://doi.org/10.1351/goldbook.A00429 + - ΔW = −μ · B - MagneticDipoleMoment - http://qudt.org/vocab/quantitykind/MagneticDipoleMoment - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-55 - 10-9.1 - 6-30 - Vector quantity μ causing a change to its energy ΔW in an external magnetic field of field flux density B: + + + + + + + + + + + + Structural + Structural + - ΔW = −μ · B - http://goldbook.iupac.org/terms/view/M03688 + + + + + POH + Written as pOH + number quantifying the acidic or the alkaline character of a solution, equal to the negative of the decimal logarithm of ion activity aOH- of the hydroxide anion OH- +pH = −10 log(a_OH-) + POH + number quantifying the acidic or the alkaline character of a solution, equal to the negative of the decimal logarithm of ion activity aOH- of the hydroxide anion OH- +pH = −10 log(a_OH-) - + - - - SurfaceCoefficientOfHeatTransfer - Coefficient of heat transfer when heat exchange takes place between a body at thermodynamic temperature Ts and its surroundings that are at a reference temperature Tr. - SurfaceCoefficientOfHeatTransfer - https://qudt.org/vocab/quantitykind/SurfaceCoefficientOfHeatTransfer - https://www.wikidata.org/wiki/Q74770365 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-40 - 5-10.2 - Coefficient of heat transfer when heat exchange takes place between a body at thermodynamic temperature Ts and its surroundings that are at a reference temperature Tr. + + IonActivity + Normally a standard solution is a solution of the ion at a molality of 1 mol/kg (exactly). Standardized conditions are normally 1013,25 hPa and 25 °C. + The correction factor is called activity coefficient and it is determined experimentally. See ActivityCoefficient + ratio of the product of ion molality b and a correction factor γ to the molality b° of the same ion in a standard solution under standardized conditions: a = bγ / b°. + IonActivity + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-01-20 + ratio of the product of ion molality b and a correction factor γ to the molality b° of the same ion in a standard solution under standardized conditions: a = bγ / b°. - + - - - - - - - - - CoefficientOfHeatTransfer - At a point on the surface separating two media with different thermodynamic temperatures, magnitude of the density of heat flow rate φ divided by the absolute value of temperature difference ΔT. - ThermalTransmittance - CoefficientOfHeatTransfer - https://qudt.org/vocab/quantitykind/CoefficientOfHeatTransfer - https://www.wikidata.org/wiki/Q634340 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-39 - 5-10.1 - At a point on the surface separating two media with different thermodynamic temperatures, magnitude of the density of heat flow rate φ divided by the absolute value of temperature difference ΔT. + + PH + At about 25 °C aqueous solutions with: +pH < 7 are acidic; +pH = 7 are neutral; +pH > 7 are alkaline. +At temperatures far from 25 °C the pH of a neutral solution differs significantly from 7. + Number quantifying the acidic or the alkaline character of a solution, equal to the negative of the decimal logarithm of ion activity aH+ of the hydrogen cation H+ +pH = −10 log(a_H+). + Written as pH + PH + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-01-21 + For more details, see ISO 80000-9:2009, Annex C + Number quantifying the acidic or the alkaline character of a solution, equal to the negative of the decimal logarithm of ion activity aH+ of the hydrogen cation H+ +pH = −10 log(a_H+). + https://doi.org/10.1351/goldbook.P04524 - + - - - - - T+2 L-2 M-1 I0 Θ0 N0 J0 - - - PerEnergyUnit - PerEnergyUnit + + PeriodDuration + duration of one cycle of a periodic event + Period + PeriodDuration + https://qudt.org/vocab/quantitykind/Period + https://www.wikidata.org/wiki/Q2642727 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-06-01 + 3-14 + duration of one cycle of a periodic event + https://doi.org/10.1351/goldbook.P04493 - - - - Chronoamperometry - - If the potential step is from a potential at which no current flows (i.e., at which the oxidation or reduction of the electrochemically active species does not take place) to one at which the current is limited by diffusion (see diffusion-limited current), the current obeys the Cottrell equation. - amperometry in which the current is measured as a function of time after a change in the applied potential - AmperiometricDetection - AmperometricCurrentTimeCurve - Chronoamperometry - amperometry in which the current is measured as a function of time after a change in the applied potential - https://doi.org/10.1515/pac-2018-0109 + + + + MarkupLanguage + A grammar for annotating a document in a way that is syntactically distinguishable from the text. + MarkupLanguage + A grammar for annotating a document in a way that is syntactically distinguishable from the text. + HTML + https://en.wikipedia.org/wiki/Markup_language - - - - Amperometry - - Amperometry can be distinguished from voltammetry by the parameter being controlled (electrode potential E) and the parameter being measured (electrode current I which is usually a function of time – see chronoamperometry). - In a non-stirred solution, a diffusion-limited current is usually measured, which is propor-tional to the concentration of an electroactive analyte. - The amperometric method provides the ability to distinguish selectively between a number of electroactive species in solution by judicious selection of the applied potential and/or choice of electrode material. - The current is usually faradaic and the applied potential is usually constant. - The integral of current with time is the electric charge, which may be related to the amount of substance reacted by Faraday’s laws of electrolysis. - Amperometry - The amperometric method provides the ability to distinguish selectively between a number of electroactive species in solution by judicious selection of the applied potential and/or choice of electrode material. - https://doi.org/10.1515/pac-2018-0109 + + + + ComputerLanguage + A formal language used to communicate with a computer. + The categorisation of computer languages is based on + +Guide to the Software Engineering Body of Knowledge (SWEBOK(R)): Version 3.0, January 2014. Editors Pierre Bourque, Richard E. Fairley. Publisher: IEEE Computer Society PressWashingtonDCUnited States. ISBN:978-0-7695-5166-1. +https://www.computer.org/education/bodies-of-knowledge/software-engineering + ComputerLanguage + A formal language used to communicate with a computer. + The categorisation of computer languages is based on + +Guide to the Software Engineering Body of Knowledge (SWEBOK(R)): Version 3.0, January 2014. Editors Pierre Bourque, Richard E. Fairley. Publisher: IEEE Computer Society PressWashingtonDCUnited States. ISBN:978-0-7695-5166-1. +https://www.computer.org/education/bodies-of-knowledge/software-engineering + https://en.wikipedia.org/wiki/Computer_language - + - - - - - T0 L-1 M0 I0 Θ+1 N0 J0 - - - TemperaturePerLengthUnit - TemperaturePerLengthUnit + + + ThermodynamicEfficiency + ThermalEfficiency + ThermodynamicEfficiency + https://qudt.org/vocab/quantitykind/ThermalEfficiency + https://www.wikidata.org/wiki/Q1452104 + 5-25.1 - - - - Holder - - An object which supports the specimen in the correct position for the characterisation process. - Holder - An object which supports the specimen in the correct position for the characterisation process. + + + + + + + + + + + + + MetrologicalReference + A reference can be a measurement unit, a measurement procedure, a reference material, or a combination of such (VIM3 1.1 NOTE 2). + A symbolic is recognized as reference unit also if it is not part of a quantity (e.g. as in the sentence "the Bq is the reference unit of Becquerel"). +For this reason we can't declare the axiom: +MetrologicalReference SubClassOf: inverse(hasMetrologicalReference) some Quantity +because there exist reference units without being part of a quantity. +This is peculiar to EMMO, where quantities as syntatic entities (explicit quantities) are distinct with quantities as semantic entities (properties). + MetrologicalReference + A reference can be a measurement unit, a measurement procedure, a reference material, or a combination of such (VIM3 1.1 NOTE 2). + A symbolic is recognized as reference unit also if it is not part of a quantity (e.g. as in the sentence "the Bq is the reference unit of Becquerel"). +For this reason we can't declare the axiom: +MetrologicalReference SubClassOf: inverse(hasMetrologicalReference) some Quantity +because there exist reference units without being part of a quantity. +This is peculiar to EMMO, where quantities as syntatic entities (explicit quantities) are distinct with quantities as semantic entities (properties). - + - + - - NuclearMagneton - Absolute value of the magnetic moment of a nucleus. - NuclearMagneton - https://www.wikidata.org/wiki/Q1166093 - 10-9.3 - Absolute value of the magnetic moment of a nucleus. - https://doi.org/10.1351/goldbook.N04236 + + VolumeFlowRate + Quantity equal to the volume dV of substance crossing a given surface during a time interval with infinitesimal duration dt, divided by this duration, thus qV = dV / dt- + VolumetricFlowRate + VolumeFlowRate + https://qudt.org/vocab/quantitykind/VolumeFlowRate + https://www.wikidata.org/wiki/Q1134348 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-72 + 4-31 + Quantity equal to the volume dV of substance crossing a given surface during a time interval with infinitesimal duration dt, divided by this duration, thus qV = dV / dt- + https://en.wikipedia.org/wiki/Volumetric_flow_rate - + - + - ReciprocalVolume - ReciprocalVolume + + + SecondPolarMomentOfArea + SecondPolarMomentOfArea + https://qudt.org/vocab/quantitykind/SecondPolarMomentOfArea + https://www.wikidata.org/wiki/Q1049636 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-30 + 4-21.2 - + - - - VacuumElectricPermittivity - The DBpedia definition (http://dbpedia.org/page/Vacuum_permittivity) is outdated since May 20, 2019. It is now a measured constant. - The value of the absolute dielectric permittivity of classical vacuum. - PermittivityOfVacuum - VacuumElectricPermittivity - http://qudt.org/vocab/constant/PermittivityOfVacuum - 6-14.1 - https://doi.org/10.1351/goldbook.P04508 + + + + + + + + + SecondAxialMomentOfArea + SecondAxialMomentOfArea + https://qudt.org/vocab/quantitykind/SecondAxialMomentOfArea + https://www.wikidata.org/wiki/Q91405496 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-29 + 4-21.1 - - - - - SimulationApplication - An application aimed to functionally reproduce an object. - SimulationApplication - An application aimed to functionally reproduce an object. - An application that predicts the pressure drop of a fluid in a pipe segment is aimed to functionally reproduce the outcome of a measurement of pressure before and after the segment. + + + + + + + + + + + + + + + + + + + + + + + + Hyperon + A baryon containing one or more strange quarks, but no charm, bottom, or top quark. + This form of matter may exist in a stable form within the core of some neutron stars. + Hyperon + A baryon containing one or more strange quarks, but no charm, bottom, or top quark. + This form of matter may exist in a stable form within the core of some neutron stars. + https://en.wikipedia.org/wiki/Hyperon - - - FunctionalIcon - An icon that focusing WHAT the object does. - An icon that imitates one representative character of the object. It share external similarities with the object, but not necessarily the same internal logical structure. - This subclass of icon inspired by Peirceian category (c) the metaphor, which represents the representative character of a sign by representing a parallelism in something else. - FunctionalIcon - An icon that imitates one representative character of the object. It share external similarities with the object, but not necessarily the same internal logical structure. - A data based model is only a functional icon, since it provide the same relations between the properties of the object (e.g., it can predict some properties as function of others) but is not considering the internal mechanisms (i.e., it can ignore the physics). - A guinea pig. - An icon that focusing WHAT the object does. + + + + + + + + + + Baryon + Subatomic particle which contains an odd number of valence quarks, at least 3. + Baryon + Subatomic particle which contains an odd number of valence quarks, at least 3. + https://en.wikipedia.org/wiki/Baryon - + - - NeutronSpinEchoSpectroscopy + + Thermogravimetry - Neutron spin echo spectroscopy is a high resolution inelastic neutron scattering method probing nanosecond dynamics. Neutron spin echo (NSE) spectroscopy uses the precession of neutron spins in a magnetic field to measure the energy transfer at the sample and decouples the energy resolution from beam characteristics like monochromatisation and collimation. - NSE - NeutronSpinEchoSpectroscopy - Neutron spin echo spectroscopy is a high resolution inelastic neutron scattering method probing nanosecond dynamics. Neutron spin echo (NSE) spectroscopy uses the precession of neutron spins in a magnetic field to measure the energy transfer at the sample and decouples the energy resolution from beam characteristics like monochromatisation and collimation. - - - - - - - RadiantEnergy - Mean energy, excluding rest energy, of the particles that are emitted, transferred, or received. - RadiantEnergy - https://www.wikidata.org/wiki/Q1259526 - 10-45 - Mean energy, excluding rest energy, of the particles that are emitted, transferred, or received. - - - - - SpatiallyFundamental - The class of individuals that satisfy a whole defining criteria (i.e. belongs to a subclass of whole) and have no spatial parts that satisfy that same criteria (no parts that are of the same type of the whole). - SpatiallyFundamental - The class of individuals that satisfy a whole defining criteria (i.e. belongs to a subclass of whole) and have no spatial parts that satisfy that same criteria (no parts that are of the same type of the whole). + Thermogravimetric analysis or thermal gravimetric analysis (TGA) is a method of thermal analysis in which the mass of a sample is measured over time as the temperature changes. This measurement provides information about physical phenomena, such as phase transitions, absorption, adsorption and desorption; as well as chemical phenomena including chemisorptions, thermal decomposition, and solid-gas reactions (e.g., oxidation or reduction). + TGA + Thermogravimetry + Thermogravimetric analysis or thermal gravimetric analysis (TGA) is a method of thermal analysis in which the mass of a sample is measured over time as the temperature changes. This measurement provides information about physical phenomena, such as phase transitions, absorption, adsorption and desorption; as well as chemical phenomena including chemisorptions, thermal decomposition, and solid-gas reactions (e.g., oxidation or reduction). - - - - - MolarHelmholtzEnergy - Helmholtz energy per amount of substance. - MolarHelmholtzEnergy - https://www.wikidata.org/wiki/Q88862986 - 9-6.3 - Helmholtz energy per amount of substance. + + + + ThermochemicalTesting + + Thermomechanical analysis (TMA) is a technique used in thermal analysis, a branch of materials science which studies the properties of materials as they change with temperature. + TMA + ThermochemicalTesting + Thermomechanical analysis (TMA) is a technique used in thermal analysis, a branch of materials science which studies the properties of materials as they change with temperature. - - - - - - - - - - MolarEnergy - Energy per amount of substance. - MolarEnergy - https://qudt.org/vocab/quantitykind/MolarEnergy - https://www.wikidata.org/wiki/Q69427512 - Energy per amount of substance. + + + + TechnologyProcess + Class that includes the application of scientific knowledge, tools and techniques in order to transform a precursor object (ex. conversion of material) following a practic purpose. + Conversion of materials and assembly of components for the manufacture of products + Technology is the application of knowledge for achieving practical goals in a reproducible way. + Technology refers to methods, systems, and devices which are the result of scientific knowledge being used for practical purposes. + application of scientific knowledge, tools, techniques, crafts or systems in order to solve a problem or to achieve an objective which can result in a product or process + application of scientific knowledge, tools, techniques, crafts, systems or methods of organization in order to solve a problem or achieve an objective + ProductionEngineeringProcess + TechnologyProcess + Class that includes the application of scientific knowledge, tools and techniques in order to transform a precursor object (ex. conversion of material) following a practic purpose. - + - + - - AtomicAttenuationCoefficient - Quotient of the linear attenuation coefficient µ and the number density, n, of atoms in the substance. - AtomicAttenuationCoefficient - https://www.wikidata.org/wiki/Q98592911 - 10-52 - Quotient of the linear attenuation coefficient µ and the number density, n, of atoms in the substance. + + PeltierCoefficient + Quotient of Peltier heat power developed at a junction, and the electric current flowing from substance a to substance b. + PeltierCoefficient + https://qudt.org/vocab/quantitykind/PeltierCoefficient + https://www.wikidata.org/wiki/Q105801003 + 12-22 + Quotient of Peltier heat power developed at a junction, and the electric current flowing from substance a to substance b. - - - - ShearCutting - Cutting workpieces between two cutting edges that move past each other (see Figure 1 [see figure in the standard]). - Scherschneiden - ShearCutting + + + + ElectrochemicalPiezoelectricMicrogravimetry + + Electrogravimetry using an electrochemical quartz crystal microbalance. + The change of mass is, for rigid deposits, linearly proportional to the change of the reso- nance frequency of the quartz crystal, according to the Sauerbrey equation. For non- rigid deposits, corrections must be made. + ElectrochemicalPiezoelectricMicrogravimetry + Electrogravimetry using an electrochemical quartz crystal microbalance. + https://doi.org/10.1515/pac-2018-0109 - - - - - Constituent - An object which is an holistic spatial part of a object. - ObjectPart - Constituent - An object which is an holistic spatial part of a object. - A tire is a constituent of a car. + + + + Electrogravimetry + + method of electroanalytical chemistry used to separate by electrolyse ions of a substance and to derive the amount of this substance from the increase in mass of an electrode. + Electrogravimetry + https://www.wikidata.org/wiki/Q902953 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-04-14 + method of electroanalytical chemistry used to separate by electrolyse ions of a substance and to derive the amount of this substance from the increase in mass of an electrode. + https://en.wikipedia.org/wiki/Electrogravimetry - - - RedCharmAntiQuark - RedCharmAntiQuark + + + + AreaFractionUnit + Unit for quantities of dimension one that are the fraction of two areas. + AreaFractionUnit + Unit for quantities of dimension one that are the fraction of two areas. + Unit for solid angle. - + - - MetrologicalUncertainty - In general, for a given set of information, it is understood that the measurement uncertainty is associated with a stated quantity value. A modification of this value results in a modification of the associated uncertainty. - Metrological uncertainty in EMMO is a slight generalisation of the VIM term 'measurement uncertainty', which is defined as "a non-negative parameter characterising the dispersion of the quantity being measured". - Metrological uncertainty includes components arising from systematic effects, such as components associated with corrections and the assigned quantity values of measurement standards, as well as the definitional uncertainty. Sometimes estimated systematic effects are not corrected for but, instead, associated measurement uncertainty components are incorporated. - The uncertainty of a quantity obtained through a well-defined procedure, characterising of the dispersion of the quantity. - A metrological uncertainty can be assigned to any objective property via the 'hasMetrologicalUncertainty' relation. - MetrologicalUncertainty - The uncertainty of a quantity obtained through a well-defined procedure, characterising of the dispersion of the quantity. - - Standard deviation -- Half-width of an interval with a stated coverage probability - Metrological uncertainty in EMMO is a slight generalisation of the VIM term 'measurement uncertainty', which is defined as "a non-negative parameter characterising the dispersion of the quantity being measured". + + FractionUnit + Quantities that are ratios of quantities of the same kind (for example length ratios and amount fractions) have the option of being expressed with units (m/m, mol/mol to aid the understanding of the quantity being expressed and also allow the use of SI prefixes, if this +is desirable (μm/m, nmol/mol). +-- SI Brochure + Unit for fractions of quantities of the same kind, to aid the understanding of the quantity being expressed. + RatioUnit + FractionUnit + Unit for fractions of quantities of the same kind, to aid the understanding of the quantity being expressed. - - - - IntermediateSample - - IntermediateSample + + + + + Curvature + Inverse of the radius of curvature. + Curvature + https://qudt.org/vocab/quantitykind/CurvatureFromRadius + https://www.wikidata.org/wiki/Q214881 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-01-31 + https://dbpedia.org/page/Curvature + 3-2 + Inverse of the radius of curvature. - - - - - - - - - - - - - - - - - - - - FundamentalInteraction - A causal system that is the representation of a Feynman diagram, where quantum represents the real particles entering and exiting the system. - A fundamental physical process is made of one or more standard particles as input, and one or more standard particles as output, where each input is direct cause of each output. -Each fundamental physical phenomena refers to a Feynman diagram, hence is made at least of three standard model particles. -This requirement implies that a physical phenomena is either a decay, annihilation, interaction, collapse or creation phenomena (fundamental) or a composition of them (non-fundamental). - A fundamental system is expressed as a complete bipartite directed graph K(m,n) of quantums, m being the number of originating quantums, and n being the receiving quantums. - FundamentalInteraction - A fundamental physical process is made of one or more standard particles as input, and one or more standard particles as output, where each input is direct cause of each output. -Each fundamental physical phenomena refers to a Feynman diagram, hence is made at least of three standard model particles. -This requirement implies that a physical phenomena is either a decay, annihilation, interaction, collapse or creation phenomena (fundamental) or a composition of them (non-fundamental). - A causal system that is the representation of a Feynman diagram, where quantum represents the real particles entering and exiting the system. - A fundamental system is expressed as a complete bipartite directed graph K(m,n) of quantums, m being the number of originating quantums, and n being the receiving quantums. + + + + + CanonicalPartitionFunction + CanonicalPartitionFunction + https://qudt.org/vocab/quantitykind/CanonicalPartitionFunction + https://www.wikidata.org/wiki/Q96142389 + 9-35.2 - + + + + + MolecularPartitionFunction + Partition function of a molecule. + MolecularPartitionFunction + https://www.wikidata.org/wiki/Q96192064 + 9-35.4 + Partition function of a molecule. + + + - + - - AbsorbedDose - Energy imparted to matter by ionizing radiation in a suitable small element of volume divided by the mass of that element of volume. - AbsorbedDose - http://qudt.org/vocab/quantitykind/AbsorbedDose - Energy imparted to matter by ionizing radiation in a suitable small element of volume divided by the mass of that element of volume. - 10-81.1 - https://doi.org/10.1351/goldbook.A00031 + MassEnergyTransferCoefficient + For ionizing uncharged particles of a given type and energy, the differential quotient of Rtr with respect to l. Where Rtr is the mean energy that is transferred to kinetic energy of charged particles by interactions of the uncharged particles of incident radiant energy R in traversing a distance l in the material of density rho, divided by rho and R + MassEnergyTransferCoefficient + https://qudt.org/vocab/quantitykind/MassEnergyTransferCoefficient + https://www.wikidata.org/wiki/Q99714619 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-04-32 + 10-87 + For ionizing uncharged particles of a given type and energy, the differential quotient of Rtr with respect to l. Where Rtr is the mean energy that is transferred to kinetic energy of charged particles by interactions of the uncharged particles of incident radiant energy R in traversing a distance l in the material of density rho, divided by rho and R - - - - Punctuation - Punctuation + + + + Nailing + Nailing is joining by hammering or pressing nails (wire pins) as auxiliary parts into the solid material. Several parts are joined by pressing them together (from: DIN 8593 part 3/09.85). + Nageln + Nailing - + - - IonChromatography + + DirectCurrentInternalResistance - Ion chromatography (or ion-exchange chromatography) is a form of chromatography that separates ions and ionizable polar molecules based on their affinity to the ion exchanger. - IonChromatography - Ion chromatography (or ion-exchange chromatography) is a form of chromatography that separates ions and ionizable polar molecules based on their affinity to the ion exchanger. - https://en.wikipedia.org/wiki/Ion_chromatography + method of determining the internal resistance of an electrochemical cell by applying a low current followed by higher current within a short period, and then record the changes of battery voltage and current + DirectCurrentInternalResistance + method of determining the internal resistance of an electrochemical cell by applying a low current followed by higher current within a short period, and then record the changes of battery voltage and current - - - - Chromatography - - In chemical analysis, chromatography is a laboratory technique for the separation of a mixture into its components. - Chromatography - In chemical analysis, chromatography is a laboratory technique for the separation of a mixture into its components. - https://en.wikipedia.org/wiki/Chromatography + + + TensorMeson + A meson with spin two. + TensorMeson + A meson with spin two. - - - - - RelativePermittivity - Permittivity divided by electric constant. - RelativePermittivity - https://qudt.org/vocab/unit/PERMITTIVITY_REL - https://www.wikidata.org/wiki/Q4027242 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-12-13 - 6-15 - Permittivity divided by electric constant. + + + MesoscopicModel + A physics-based model based on a physics equation describing the behaviour of mesoscopic entities, i.e. a set of bounded atoms like a molecule, bead or nanoparticle. + MesoscopicModel + A physics-based model based on a physics equation describing the behaviour of mesoscopic entities, i.e. a set of bounded atoms like a molecule, bead or nanoparticle. - + - + - - SurfaceActivityDensity - Quotient of the activity A of a sample and the total area S of the surface of that sample. - SurfaceActivityDensity - https://qudt.org/vocab/quantitykind/SurfaceActivityDensity - https://www.wikidata.org/wiki/Q98103005 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-10 - 10-30 - Quotient of the activity A of a sample and the total area S of the surface of that sample. + + + RelativePressureCoefficient + RelativePressureCoefficient + https://qudt.org/vocab/quantitykind/RelativePressureCoefficient + https://www.wikidata.org/wiki/Q74761852 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-30 + 5-3.3 - + - + + + + + + + - AbsoluteHumidity - Mass of the contained water vapour per volume. - MassConcentrationOfWaterVapour - AbsoluteHumidity - https://qudt.org/vocab/quantitykind/AbsoluteHumidity - https://qudt.org/vocab/quantitykind/MassConcentrationOfWaterVapour - https://www.wikidata.org/wiki/Q76378808 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-60 - 5-28 - Mass of the contained water vapour per volume. + PressureCoefficient + Change of pressure per change of temperature at constant volume. + PressureCoefficient + https://qudt.org/vocab/quantitykind/PressureCoefficient + https://www.wikidata.org/wiki/Q74762732 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-29 + 5-4 + Change of pressure per change of temperature at constant volume. - - - - OpenCircuitHold - - a process in which the electric current is kept constant at 0 (i.e., open-circuit conditions) - OCVHold - OpenCircuitHold - a process in which the electric current is kept constant at 0 (i.e., open-circuit conditions) + + + + + + + + + + FineStructureConstant + A fundamental physical constant characterizing the strength of the electromagnetic interaction between elementary charged particles. + FineStructureConstant + http://qudt.org/vocab/constant/FineStructureConstant + https://doi.org/10.1351/goldbook.F02389 - - - - Potentiometry - - For measurements using ion-selective electrodes, the measurement is made under equi- librium conditions what means that the macroscopic electric current is zero and the con- centrations of all species are uniform throughout the solution. The indicator electrode is in direct contact with the analyte solution, whereas the reference electrode is usually separated from the analyte solution by a salt bridge. The potential difference between the indicator and reference electrodes is normally directly proportional to the logarithm of the activity (concentration) of the analyte in the solution (Nernst equation). See also ion selec- tive electrode. - Method of electroanalytical chemistry based on measurement of an electrode potential. - Potentiometric methods are used to measure the electrochemical potentials of a metallic structure in a given environment. - Potentiometry - https://www.wikidata.org/wiki/Q900632 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-04-12 - Potentiometric methods are used to measure the electrochemical potentials of a metallic structure in a given environment. - https://doi.org/10.1515/pac-2018-0109 + + + + + Status + An object which is an holistic temporal part of a process. + State + Status + An object which is an holistic temporal part of a process. + A semi-naked man is a status in the process of a man's dressing. - - - - LightScattering - - Light scattering is the way light behaves when it interacts with a medium that contains particles or the boundary between different mediums where defects or structures are present. It is different than the effects of refraction, where light undergoes a change in index of refraction as it passes from one medium to another, or reflection, where light reflects back into the same medium, both of which are governed by Snell’s law. Light scattering can be caused by factors such as the nature, texture, or specific structures of a surface and the presence of gas, liquid, or solid particles through which light propagates, as well as the nature of the light itself, of its wavelengths and polarization states. It usually results in diffuse light and can also affect the dispersion of color. - LightScattering - Light scattering is the way light behaves when it interacts with a medium that contains particles or the boundary between different mediums where defects or structures are present. It is different than the effects of refraction, where light undergoes a change in index of refraction as it passes from one medium to another, or reflection, where light reflects back into the same medium, both of which are governed by Snell’s law. Light scattering can be caused by factors such as the nature, texture, or specific structures of a surface and the presence of gas, liquid, or solid particles through which light propagates, as well as the nature of the light itself, of its wavelengths and polarization states. It usually results in diffuse light and can also affect the dispersion of color. + + + + Solid + A continuum characterized by structural rigidity and resistance to changes of shape or volume, that retains its shape and density when not confined. + Solid + A continuum characterized by structural rigidity and resistance to changes of shape or volume, that retains its shape and density when not confined. + + + + + Muon + The class of individuals that stand for muon elementary particles belonging to the second generation of leptons. + Muon + The class of individuals that stand for muon elementary particles belonging to the second generation of leptons. + https://en.wikipedia.org/wiki/Muon + + + + + + + HelmholtzEnergy + HelmholtzFreeEnergy + HelmholtzEnergy + https://www.wikidata.org/wiki/Q865821 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-24 + 5-20.4 + https://doi.org/10.1351/goldbook.H02772 + + + + + + RadiantFlux + The radiant energy emitted, reflected, transmitted or received, per unit time. + RadiantFlux + http://qudt.org/vocab/quantitykind/RadiantFlux + https://doi.org/10.1351/goldbook.R05046 + + + + + + + + + + + + + + Power + Rate of transfer of energy per unit time. + Power + http://qudt.org/vocab/quantitykind/Power + 4-27 + 6-45 + Rate of transfer of energy per unit time. + https://doi.org/10.1351/goldbook.P04792 - - + + + + + Degenerency + Multiplicity + Degenerency + https://www.wikidata.org/wiki/Q902301 + 9-36.2 + https://doi.org/10.1351/goldbook.D01556 + + + + - - - 1 + + + + Vector + 1-dimensional array who's spatial direct parts are numbers. + LinearArray + 1DArray + Vector + 1-dimensional array who's spatial direct parts are numbers. + + + + - - + + - - CalibrationProcess - Operation performed on a measuring instrument or a measuring system that, under specified conditions -1. establishes a relation between the values with measurement uncertainties provided by measurement standards and corresponding indications with associated measurement uncertainties and -2. uses this information to establish a relation for obtaining a measurement result from an indication -NOTE 1 The objective of calibration is to provide traceability of measurement results obtained when using a calibrated measuring instrument or measuring system. -NOTE 2 The outcome of a calibration may be expressed by a statement, calibration function, calibration diagram, calibration curve, or calibration table. In some cases, it may consist of an additive or multiplicative correction of the indication with associated measurement uncertainty. -NOTE 3 Calibration should not be confused with adjustment of a measuring system, often mistakenly called “selfcalibration”, nor with verification of calibration. Calibration is sometimes a prerequisite for verification, which provides confirmation that specified requirements (often maximum permissible errors) are met. Calibration is sometimes also a prerequisite for adjustment, which is the set of operations carried out on a measuring system such that the system provides prescribed indications corresponding to given values of quantities being measured, typically obtained from -measurement standards. -NOTE 4 Sometimes the first step alone of the operation mentioned in the definition is intended as being calibration, as it was in previous editions of this Vocabulary. The second step is in fact required to establish instrumental uncertainty -for the measurement results obtained when using the calibrated measuring system. The two steps together aim to demonstrate the metrological traceability of measurement results obtained by a calibrated measuring system. In the -past the second step was usually considered to occur after the calibration. -NOTE 5 A comparison between two measurement standards may be viewed as a calibration if the comparison is used to check and, if necessary, correct the value and measurement uncertainty attributed to one of the measurement -standards. + + Speed + Length per unit time. --- International Vocabulary of Metrology(VIM) - Sequence of operations/actions that are needed to convert the initial signal (as produced by the detector) into a meaningful and useable raw data. - Usually the calibration process involve a reference sample (with pre-defined, specific, and stable physical characteristics and known properties), in order to extract calibration data. In this way, the accuracy of the measurement tool and its components (for example the probe) will be evaluated and confirmed. - CalibrationProcess - Operation performed on a measuring instrument or a measuring system that, under specified conditions -1. establishes a relation between the values with measurement uncertainties provided by measurement standards and corresponding indications with associated measurement uncertainties and -2. uses this information to establish a relation for obtaining a measurement result from an indication -NOTE 1 The objective of calibration is to provide traceability of measurement results obtained when using a calibrated measuring instrument or measuring system. -NOTE 2 The outcome of a calibration may be expressed by a statement, calibration function, calibration diagram, calibration curve, or calibration table. In some cases, it may consist of an additive or multiplicative correction of the indication with associated measurement uncertainty. -NOTE 3 Calibration should not be confused with adjustment of a measuring system, often mistakenly called “selfcalibration”, nor with verification of calibration. Calibration is sometimes a prerequisite for verification, which provides confirmation that specified requirements (often maximum permissible errors) are met. Calibration is sometimes also a prerequisite for adjustment, which is the set of operations carried out on a measuring system such that the system provides prescribed indications corresponding to given values of quantities being measured, typically obtained from -measurement standards. -NOTE 4 Sometimes the first step alone of the operation mentioned in the definition is intended as being calibration, as it was in previous editions of this Vocabulary. The second step is in fact required to establish instrumental uncertainty -for the measurement results obtained when using the calibrated measuring system. The two steps together aim to demonstrate the metrological traceability of measurement results obtained by a calibrated measuring system. In the -past the second step was usually considered to occur after the calibration. -NOTE 5 A comparison between two measurement standards may be viewed as a calibration if the comparison is used to check and, if necessary, correct the value and measurement uncertainty attributed to one of the measurement -standards. +Speed in the absolute value of the velocity. + Speed + http://qudt.org/vocab/quantitykind/Speed + 3-8.2 + https://doi.org/10.1351/goldbook.S05852 + --- International Vocabulary of Metrology(VIM) - Sequence of operations/actions that are needed to convert the initial signal (as produced by the detector) into a meaningful and useable raw data. - In nanoindentation, the electrical signal coming from capacitive displacement gauge is converted into a real raw-displacement signal after using a proper calibration function (as obtained by the equipment manufacturer). Then, additional calibration procedures are applied to define the point of initial contact and to correct for instrument compliance, thermal drift, and indenter area function to obtain the real useable displacement data. - Usually the calibration process involve a reference sample (with pre-defined, specific, and stable physical characteristics and known properties), in order to extract calibration data. In this way, the accuracy of the measurement tool and its components (for example the probe) will be evaluated and confirmed. + + + + ObjectiveProperty + A quantity that is obtained from a well-defined procedure. + Subclasses of 'ObjectiveProperty' classify objects according to the type semiosis that is used to connect the property to the object (e.g. by measurement, by convention, by modelling). + The word objective does not mean that each observation will provide the same results. It means that the observation followed a well defined procedure. + +This class refers to what is commonly known as physical property, i.e. a measurable property of physical system, whether is quantifiable or not. + PhysicalProperty + QuantitativeProperty + ObjectiveProperty + A quantity that is obtained from a well-defined procedure. + The word objective does not mean that each observation will provide the same results. It means that the observation followed a well defined procedure. + +This class refers to what is commonly known as physical property, i.e. a measurable property of physical system, whether is quantifiable or not. - - - - - - - - - - - - - - - - - - - DownQuarkType - DownQuarkType + + + MetallicMaterial + MetallicMaterial - + - + - - DirectionDistributionOfCrossSection - Differential quotient of the cross section for scattering a particle in a given direction and the solid angle around that direction. - DirectionDistributionOfCrossSection - https://qudt.org/vocab/quantitykind/AngularCrossSection - https://www.wikidata.org/wiki/Q98266630 - 10-39 - Differential quotient of the cross section for scattering a particle in a given direction and the solid angle around that direction. + + DoseEquivalent + A dose quantity used in the International Commission on Radiological Protection (ICRP) system of radiological protection. + DoseEquivalent + http://qudt.org/vocab/quantitykind/DoseEquivalent + 10-83.1 + A dose quantity used in the International Commission on Radiological Protection (ICRP) system of radiological protection. + https://doi.org/10.1351/goldbook.E02101 - - - TauNeutrino - A neutrino belonging to the third generation of leptons. - TauNeutrino - A neutrino belonging to the third generation of leptons. - https://en.wikipedia.org/wiki/Tau_neutrino + + + + + ElectronMass + The rest mass of an electron. + ElectronMass + http://qudt.org/vocab/constant/ElectronMass + https://doi.org/10.1351/goldbook.E02008 - - - - ShellScript - A command language designed to be run by a command-line interpreter, like a Unix shell. - ShellScript - A command language designed to be run by a command-line interpreter, like a Unix shell. - https://en.wikipedia.org/wiki/Shell_script + + + + + VacuumElectricPermittivity + The DBpedia definition (http://dbpedia.org/page/Vacuum_permittivity) is outdated since May 20, 2019. It is now a measured constant. + The value of the absolute dielectric permittivity of classical vacuum. + PermittivityOfVacuum + VacuumElectricPermittivity + http://qudt.org/vocab/constant/PermittivityOfVacuum + 6-14.1 + https://doi.org/10.1351/goldbook.P04508 - - - - CommandLanguage - An interpreted computer language for job control in computing. - CommandLanguage - An interpreted computer language for job control in computing. - Unix shell. -Batch programming languages. - https://en.wikipedia.org/wiki/Command_language + + + + MagneticPolarisation + Vector quantity equal to the product of the magnetization M and the magnetic constant μ0. + MagneticPolarisation + https://qudt.org/vocab/quantitykind/MagneticPolarization + https://www.wikidata.org/wiki/Q856711 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-54 + 6-29 + Vector quantity equal to the product of the magnetization M and the magnetic constant μ0. - - - - Milling - Machining with a circular cutting movement, usually associated with a multi-toothed tool, and with a feed movement perpendicular or oblique to the axis of rotation of the tool, to produce any workpiece surface. - Fräsen - Milling + + + + + + + + + + + MagneticFluxDensity + Often denoted B. + Strength of the magnetic field. + MagneticInduction + MagneticFluxDensity + http://qudt.org/vocab/quantitykind/MagneticFluxDensity + https://www.wikidata.org/wiki/Q30204 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-19 + 6-21 + Strength of the magnetic field. + https://doi.org/10.1351/goldbook.M03686 + + + + + + + CountingUnit + Unit for dimensionless quantities that have the nature of count. + CountingUnit + http://qudt.org/vocab/unit/NUM + 1 + Unit for dimensionless quantities that have the nature of count. + Unit of atomic number +Unit of number of cellular +Unit of degeneracy in quantum mechanics + + + + + DimensionlessUnit + The subclass of measurement units with no physical dimension. + DimensionlessUnit + http://qudt.org/vocab/unit/UNITLESS + The subclass of measurement units with no physical dimension. + Refractive index +Plane angle +Number of apples - - - - - BraggAngle - Angle between the scattered ray and the lattice plane. - BraggAngle - https://qudt.org/vocab/quantitykind/BraggAngle - https://www.wikidata.org/wiki/Q105488118 - 12-4 - Angle between the scattered ray and the lattice plane. + + + + NaturalProcess + A process occurring by natural (non-intentional) laws. + NonIntentionalProcess + NaturalProcess + A process occurring by natural (non-intentional) laws. - - + + - - + + + + + + - - SurfaceTension - 4-26 - SurfaceTension - https://qudt.org/vocab/quantitykind/SurfaceTension - https://www.wikidata.org/wiki/Q170749 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-42 - https://doi.org/10.1351/goldbook.S06192 + Cogniser + An interpreter who establish the connection between an icon an an object recognizing their resemblance (e.g. logical, pictorial) + Cogniser + An interpreter who establish the connection between an icon an an object recognizing their resemblance (e.g. logical, pictorial) + The scientist that connects an equation to a physical phenomenon. - + - - - ShearStrain - Displacement of one surface with respect to another divided by the distance between them. - ShearStrain - https://qudt.org/vocab/quantitykind/ShearStrain - https://www.wikidata.org/wiki/Q7561704 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-59 - 4-17.3 - Displacement of one surface with respect to another divided by the distance between them. - https://doi.org/10.1351/goldbook.S05637 + + + + + + + + + RichardsonConstant + Parameter in the expression for the thermionic emission current density J for a metal in terms of the thermodynamic temperature T and work function. + RichardsonConstant + https://qudt.org/vocab/quantitykind/RichardsonConstant + https://www.wikidata.org/wiki/Q105883079 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-06-30 + 12-26 + Parameter in the expression for the thermionic emission current density J for a metal in terms of the thermodynamic temperature T and work function. - + - + - - Compressibility - Measure of the relative volume change of a fluid or solid as a response to a pressure change. - Compressibility - https://qudt.org/vocab/quantitykind/Compressibility - https://www.wikidata.org/wiki/Q8067817 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-70 - 4-20 - Measure of the relative volume change of a fluid or solid as a response to a pressure change. + + + AmountConcentration + The amount of a constituent divided by the volume of the mixture. + Concentration + MolarConcentration + Molarity + AmountConcentration + http://qudt.org/vocab/quantitykind/AmountOfSubstanceConcentrationOfB + https://doi.org/10.1351/goldbook.A00295 - + + + + EnvironmentalScanningElectronMicroscopy + + The environmental scanning electron microscope (ESEM) is a scanning electron microscope (SEM) that allows for the option of collecting electron micrographs of specimens that are wet, uncoated, or both by allowing for a gaseous environment in the specimen chamber. + EnvironmentalScanningElectronMicroscopy + The environmental scanning electron microscope (ESEM) is a scanning electron microscope (SEM) that allows for the option of collecting electron micrographs of specimens that are wet, uncoated, or both by allowing for a gaseous environment in the specimen chamber. + + + - - - - - T0 L-3 M0 I0 Θ0 N0 J0 - - - PerVolumeUnit - PerVolumeUnit + + RadiusOfCurvature + Radius of the osculating circle of a planar curve at a particular point of the curve. + RadiusOfCurvature + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-01-30 + https://dbpedia.org/page/Radius_of_curvature + 3-1.12 + Radius of the osculating circle of a planar curve at a particular point of the curve. + https://en.wikipedia.org/wiki/Radius_of_curvature - + + + + Radius + Distance from the centre of a circle to the circumference. + Radius + https://qudt.org/vocab/quantitykind/Radius + https://www.wikidata.org/wiki/Q173817 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-01-25 + https://dbpedia.org/page/Radius + 3-1.6 + Distance from the centre of a circle to the circumference. + https://en.wikipedia.org/wiki/Radius + + + + + + ProcessEngineeringProcess + Deals with entities that have a undefined shape. Undefined means that the actual shape of the entity that is produced is not relevant for the definition of the process. +In fact, everything has a shape, but in process engineering this is not relevant. + +e.g. the fact that steel comes in sheets is not relevant for the definition of steel material generated in a steel-making process. + ProcessEngineeringProcess + Deals with entities that have a undefined shape. Undefined means that the actual shape of the entity that is produced is not relevant for the definition of the process. +In fact, everything has a shape, but in process engineering this is not relevant. + +e.g. the fact that steel comes in sheets is not relevant for the definition of steel material generated in a steel-making process. + https://de.wikipedia.org/wiki/Verfahrenstechnik + + + - - - - - - - - - - - - PhysicallyInteractingConvex - PhysicallyInteractingConvex + GreenCharmQuark + GreenCharmQuark - - - + + - - - T-4 L0 M+1 I0 Θ0 N0 J0 - + + + + + + - MassPerQuarticTimeUnit - MassPerQuarticTimeUnit + CompositeFermion + CompositeFermion + Examples of composite particles with half-integer spin: +spin 1/2: He3 in ground state, proton, neutron +spin 3/2: He5 in ground state, Delta baryons (excitations of the proton and neutron) - - - + + + + + BeginStep + An initial step of a workflow. + There may be more than one begin task, if they run in parallel. + BeginStep + An initial step of a workflow. + There may be more than one begin task, if they run in parallel. + + + + + + - - - T0 L+3 M0 I0 Θ0 N0 J0 - + + + + + + + - VolumeUnit - VolumeUnit + Step + A step is part of a specific granularity level for the workflow description, as composition of tasks. + A task that is a well formed tile of a workflow, according to a reductionistic description. + Step + A task that is a well formed tile of a workflow, according to a reductionistic description. + A step is part of a specific granularity level for the workflow description, as composition of tasks. - - - - DisplacementCurrentDensity - Vector quantity equal to the time derivative of the electric flux density. - DisplacementCurrentDensity - https://qudt.org/vocab/quantitykind/DisplacementCurrentDensity - https://www.wikidata.org/wiki/Q77614612 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-42 - 6-18 - Vector quantity equal to the time derivative of the electric flux density. + + + + + + BeginTile + BeginTile - - + + - - + + = - - - - ElectricCurrentDensity - Electric current divided by the cross-sectional area it is passing through. - AreicElectricCurrent - CurrentDensity - ElectricCurrentDensity - http://qudt.org/vocab/quantitykind/ElectricCurrentDensity - https://www.wikidata.org/wiki/Q234072 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-11 - 6-8 - https://en.wikipedia.org/wiki/Current_density - https://doi.org/10.1351/goldbook.E01928 + + + Equals + The equals symbol. + Equals + The equals symbol. - - - - - - - - - - - - Structural - Structural + + + + MembraneOsmometry + + In the membrane osmometry technique, a pure solvent and polymer solution are separated by a semipermeable membrane, due to the higher chemical potential of the solvent in the pure solvent than in polymer solution, the solvent starts moving towards the polymer solution. + MembraneOsmometry + In the membrane osmometry technique, a pure solvent and polymer solution are separated by a semipermeable membrane, due to the higher chemical potential of the solvent in the pure solvent than in polymer solution, the solvent starts moving towards the polymer solution. - - - - ConductanceForAlternatingCurrent - Real part of the admittance. - ConductanceForAlternatingCurrent - https://www.wikidata.org/wiki/Q79464628 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-53 - 6-52.2 - Real part of the admittance. + + + + Liquid + A liquid is a nearly incompressible fluid that conforms to the shape of its container but retains a (nearly) constant volume independent of pressure. + Liquid + A liquid is a nearly incompressible fluid that conforms to the shape of its container but retains a (nearly) constant volume independent of pressure. - - - + + + - - - T-1 L0 M0 I0 Θ0 N+1 J0 - + + + + + + - CatalyticActivityUnit - CatalyticActivityUnit + Symbolic + A discrete data whose elements can be decoded as tokens from one or more alphabets, without necessarily respecting syntactic rules. + A symbolic entity is not necessarily graphical (e.g. it doesn't necessarily have the physical shape of a letter), but its elements can be decoded and put in relation with an alphabet. +In other words, a sequence of bit "1000010" in a RAM (a non-graphical entity) is a valid symbol since it can be decoded through ASCII rules as the letter "B". The same holds for an entity standing for the sound of a voice saying: "Hello", since it can be decomposed in discrete parts, each of them being associated to a letter of an alphabet. + Symbolic + A discrete data whose elements can be decoded as tokens from one or more alphabets, without necessarily respecting syntactic rules. + fe780 +emmo +!5*a +cat +for(i=0;i<N;++i) + A symbolic entity is not necessarily graphical (e.g. it doesn't necessarily have the physical shape of a letter), but its elements can be decoded and put in relation with an alphabet. +In other words, a sequence of bit "1000010" in a RAM (a non-graphical entity) is a valid symbol since it can be decoded through ASCII rules as the letter "B". The same holds for an entity standing for the sound of a voice saying: "Hello", since it can be decomposed in discrete parts, each of them being associated to a letter of an alphabet. + A symbolic object possesses a reductionistic oriented structure. +For example, text is made of words, spaces and punctuations. Words are made of characters (i.e. atomic symbols). - + - - + - - T0 L0 M0 I0 Θ+1 N+1 J0 + + - - AmountTemperatureUnit - AmountTemperatureUnit + + + + Pressure + The force applied perpendicular to the surface of an object per unit area over which that force is distributed. + Pressure + http://qudt.org/vocab/quantitykind/Pressure + 4-14.1 + The force applied perpendicular to the surface of an object per unit area over which that force is distributed. + https://doi.org/10.1351/goldbook.P04819 - - - - - BohrRadius - Radius of the electron orbital in the hydrogen atom in its ground state in the Bohr model of the atom. - BohrRadius - https://qudt.org/vocab/constant/BohrRadius - https://www.wikidata.org/wiki/Q652571 - 10-6 - Radius of the electron orbital in the hydrogen atom in its ground state in the Bohr model of the atom. - https://doi.org/10.1351/goldbook.B00693 + + + + DifferentialPulseVoltammetry + Voltammetry in which small potential pulses (constant height 10 to 100 mV, constant width 10 to 100 ms) are superimposed onto a linearly varying potential or onto a staircase potential ramp. The current is sampled just before the onset of the pulse (e.g. 10 to 20 ms) and for the same sampling time just before the end of the pulse. The difference between the two sampled currents is plotted versus the potential applied before the pulse. Thus, a differential pulse voltammogram is peak-shaped. Differential pulse polarography is differential pulse voltammetry in which a dropping mercury electrode is used as the working electrode. A pulse is applied before the mechani- cally enforced end of the drop and the current is sampled twice: just before the onset of the pulse and just before its end. The pulse width is usually 10 to 20 % of the drop life. The drop dislodgement is synchronized with current sampling, which is carried out as in DPV. The ratio of faradaic current to charging current is enhanced and the negative influence of charging current is partially eliminated in the same way as in normal pulse voltammetry (NPV). Moreover, subtraction of the charging current sampled before the application of the pulse further decreases its negative influence. Due to the more enhanced signal (faradaic current) to noise (charging current) ratio, the limit of detection is lower than with NPV. The sensitivity of DPV depends on the reversibility of the electrode reaction of the analyte. + DPV + DifferentialPulseVoltammetry + https://www.wikidata.org/wiki/Q5275361 + Voltammetry in which small potential pulses (constant height 10 to 100 mV, constant width 10 to 100 ms) are superimposed onto a linearly varying potential or onto a staircase potential ramp. The current is sampled just before the onset of the pulse (e.g. 10 to 20 ms) and for the same sampling time just before the end of the pulse. The difference between the two sampled currents is plotted versus the potential applied before the pulse. Thus, a differential pulse voltammogram is peak-shaped. Differential pulse polarography is differential pulse voltammetry in which a dropping mercury electrode is used as the working electrode. A pulse is applied before the mechani- cally enforced end of the drop and the current is sampled twice: just before the onset of the pulse and just before its end. The pulse width is usually 10 to 20 % of the drop life. The drop dislodgement is synchronized with current sampling, which is carried out as in DPV. The ratio of faradaic current to charging current is enhanced and the negative influence of charging current is partially eliminated in the same way as in normal pulse voltammetry (NPV). Moreover, subtraction of the charging current sampled before the application of the pulse further decreases its negative influence. Due to the more enhanced signal (faradaic current) to noise (charging current) ratio, the limit of detection is lower than with NPV. The sensitivity of DPV depends on the reversibility of the electrode reaction of the analyte. + https://en.wikipedia.org/wiki/Differential_pulse_voltammetry + https://doi.org/10.1515/pac-2018-0109 - + - + - - MagneticTension - Scalar quantity equal to the line integral of the magnetic field strength H along a specified path linking two points a and b. - MagneticTension - https://qudt.org/vocab/quantitykind/MagneticTension - https://www.wikidata.org/wiki/Q77993836 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-57 - 6-37.2 - Scalar quantity equal to the line integral of the magnetic field strength H along a specified path linking two points a and b. + + + HallCoefficient + The relation between electric field strength and current density in an isotropic conductor. + HallCoefficient + https://qudt.org/vocab/quantitykind/HallCoefficient + https://www.wikidata.org/wiki/Q997439 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=521-09-02 + 12-19 + The relation between electric field strength and current density in an isotropic conductor. - - - - JavaScript - JavaScript + + + GluonType6 + GluonType6 - - - - - SolidFoam - A foam of trapped gas in a solid. - SolidFoam - A foam of trapped gas in a solid. - Aerogel + + + + + + + + + Tessellation + A causal object that is tessellated in direct parts. + A tessellation (or tiling) is the covering of a surface, often a plane, using one or more geometric shapes, called tiles, with no overlaps and no gaps. + Tiling + Tessellation + A tessellation (or tiling) is the covering of a surface, often a plane, using one or more geometric shapes, called tiles, with no overlaps and no gaps. + A causal object that is tessellated in direct parts. - - - - Screwing - Screwing (screwing on, screwing in, screwing tight) is joining by pressing on by means of a self-locking thread (from: DIN 8593 Part 3/09.85). - Schrauben - Screwing + + + TemporallyFundamental + The class of individuals that satisfy a whole defining criteria (i.e. belongs to a subclass of whole) and have no temporal parts that satisfy that same criteria (no parts that are of the same type of the whole). + TemporallyFundamental + The class of individuals that satisfy a whole defining criteria (i.e. belongs to a subclass of whole) and have no temporal parts that satisfy that same criteria (no parts that are of the same type of the whole). - - - OrdinalQuantity - "Ordinal quantities, such as Rockwell C hardness, are usually not considered to be part of a system of quantities because they are related to other quantities through empirical relations only." -International vocabulary of metrology (VIM) - "Quantity, defined by a conventional measurement procedure, for which a total ordering relation can be established, according to magnitude, with other quantities of the same kind, but for which no algebraic operations among those quantities exist" -International vocabulary of metrology (VIM) - OrdinalQuantity - "Quantity, defined by a conventional measurement procedure, for which a total ordering relation can be established, according to magnitude, with other quantities of the same kind, but for which no algebraic operations among those quantities exist" -International vocabulary of metrology (VIM) - Hardness -Resilience - ordinal quantity + + + + + + + T-1 L-3 M0 I0 Θ0 N0 J0 + + + FrequencyPerVolumeUnit + FrequencyPerVolumeUnit - - - - CompressiveForming - Forming of a solid body, whereby the plastic state is essentially brought about by uniaxial or multiaxial compressive stress. - lasciano tensioni residue di compressione - Druckumformen - CompressiveForming + + + TemporalTile + A direct part that is obtained by partitioning a whole purely in temporal parts. + TemporalTile + A direct part that is obtained by partitioning a whole purely in temporal parts. - - - - - MobilityRatio - Quotient of electron and hole mobility. - MobilityRatio - https://qudt.org/vocab/quantitykind/MobilityRatio - https://www.wikidata.org/wiki/Q106010255 - 12-31 - Quotient of electron and hole mobility. + + + + MetrologicalUncertainty + In general, for a given set of information, it is understood that the measurement uncertainty is associated with a stated quantity value. A modification of this value results in a modification of the associated uncertainty. + Metrological uncertainty in EMMO is a slight generalisation of the VIM term 'measurement uncertainty', which is defined as "a non-negative parameter characterising the dispersion of the quantity being measured". + Metrological uncertainty includes components arising from systematic effects, such as components associated with corrections and the assigned quantity values of measurement standards, as well as the definitional uncertainty. Sometimes estimated systematic effects are not corrected for but, instead, associated measurement uncertainty components are incorporated. + The uncertainty of a quantity obtained through a well-defined procedure, characterising of the dispersion of the quantity. + A metrological uncertainty can be assigned to any objective property via the 'hasMetrologicalUncertainty' relation. + MetrologicalUncertainty + The uncertainty of a quantity obtained through a well-defined procedure, characterising of the dispersion of the quantity. + - Standard deviation +- Half-width of an interval with a stated coverage probability + Metrological uncertainty in EMMO is a slight generalisation of the VIM term 'measurement uncertainty', which is defined as "a non-negative parameter characterising the dispersion of the quantity being measured". - - - - - MolarEnthalpy - MolarEnthalpy - https://www.wikidata.org/wiki/Q88769977 - Enthalpy per amount of substance. - 9-6.2 + + + + Interpretant + The interpreter's internal representation of the object in a semiosis process. + Interpretant + The interpreter's internal representation of the object in a semiosis process. - - - - - DegreeOfDissociation - Dissociation may occur stepwise. - ratio of the number of dissociation events to the maximum number of theoretically possible dissociation events. - DissociationFraction - DegreeOfDissociation - https://qudt.org/vocab/quantitykind/DegreeOfDissociation - https://www.wikidata.org/wiki/Q907334 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-01-09 - 9-43 - ratio of the number of dissociation events to the maximum number of theoretically possible dissociation events. - https://doi.org/10.1351/goldbook.D01566 + + + + DropForging + DropForging - - + + - + - - + + + + + + + + + + + + + + + + + + + + + + + BlueAntiQuark + BlueAntiQuark + + + + + + + + + + + + + ModulusOfRigidity + Ratio of shear stress to the shear strain. + ShearModulus + ModulusOfRigidity + https://qudt.org/vocab/quantitykind/ShearModulus + https://www.wikidata.org/wiki/Q461466 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-68 + 4-19.2 + Ratio of shear stress to the shear strain. + https://doi.org/10.1351/goldbook.S05635 + + + + + + URI + A Uniform Resource Identifier (URI) is a compact sequence of characters that identifies an abstract or physical resource. + URI = scheme ":" ["//" authority] path ["?" query] ["#" fragment] + URI + https://en.wikipedia.org/wiki/File:URI_syntax_diagram.svg + A Uniform Resource Identifier (URI) is a compact sequence of characters that identifies an abstract or physical resource. + URI = scheme ":" ["//" authority] path ["?" query] ["#" fragment] + + + + + + Coulometry + Electrochemical measurement principle in which the electric charge required to carry out a known electrochemical reaction is measured. By Faraday’s laws of electrolysis, the amount of substance is proportional to the charge. Coulometry used to measure the amount of substance is a primary reference measurement procedure [VIM 2.8] not requiring calibration with a standard for a quantity of the same kind (i.e. amount of substance). The coulometric experiment can be carried out at controlled (constant) potential (see direct coulometry at controlled potential) or controlled (constant) current (see direct coulometry at controlled current). + Coulometry + https://www.wikidata.org/wiki/Q1136979 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-04-13 + Electrochemical measurement principle in which the electric charge required to carry out a known electrochemical reaction is measured. By Faraday’s laws of electrolysis, the amount of substance is proportional to the charge. Coulometry used to measure the amount of substance is a primary reference measurement procedure [VIM 2.8] not requiring calibration with a standard for a quantity of the same kind (i.e. amount of substance). The coulometric experiment can be carried out at controlled (constant) potential (see direct coulometry at controlled potential) or controlled (constant) current (see direct coulometry at controlled current). + https://en.wikipedia.org/wiki/Coulometry + https://doi.org/10.1515/pac-2018-0109 + + + + + + ElectrochemicalTesting + + In electrochemical characterization, the measurement of potential, charge, or current is used to determine an analyte's concentration or to characterize an analyte's chemical reactivity + http://dx.doi.org/10.1016/B978-0-323-46140-5.00002-9 + ElectrochemicalTesting + In electrochemical characterization, the measurement of potential, charge, or current is used to determine an analyte's concentration or to characterize an analyte's chemical reactivity + + + + - + - + - - MeasurementUnit - "Real scalar quantity, defined and adopted by convention, with which any other quantity of the same kind can be compared to express the ratio of the second quantity to the first one as a number" -ISO 80000-1 - A metrological reference for a physical quantity. - MeasurementUnit - A metrological reference for a physical quantity. - kg -m/s -km - measurement unit (VIM3 1.9) - "Real scalar quantity, defined and adopted by convention, with which any other quantity of the same kind can be compared to express the ratio of the second quantity to the first one as a number" -ISO 80000-1 - "Unit symbols are mathematical entities and not abbreviations." - -"Symbols for units are treated as mathematical entities. In expressing the value of a quantity as the product of a numerical value and a unit, both the numerical value and the unit may be treated by the ordinary rules of algebra." + + + + + + + + + UnitSymbol + A symbol that stands for a single unit. + UnitSymbol + A symbol that stands for a single unit. + Some examples are "Pa", "m" and "J". + -https://www.bipm.org/utils/common/pdf/si-brochure/SI-Brochure-9-EN.pdf - Measurement units and procedure units are disjoint. - Quantitative value are expressed as a multiple of the 'MeasurementUnit'. + + + + NaturalMaterial + A Material occurring in nature, without the need of human intervention. + NaturalMaterial + A Material occurring in nature, without the need of human intervention. - - - GreenTopQuark - GreenTopQuark + + + + + Material + A instance of a material (e.g. nitrogen) can represent different states of matter. The fact that the individual also belongs to other classes (e.g. Gas) would reveal the actual form in which the material is found. + The class of individuals standing for an amount of ordinary matter substance (or mixture of substances) in different states of matter or phases. + Material + The class of individuals standing for an amount of ordinary matter substance (or mixture of substances) in different states of matter or phases. + A instance of a material (e.g. nitrogen) can represent different states of matter. The fact that the individual also belongs to other classes (e.g. Gas) would reveal the actual form in which the material is found. + Material usually means some definite kind, quality, or quantity of matter, especially as intended for use. - + - - - ThermodynamicGrueneisenParameter - ThermodynamicGrueneisenParameter - https://www.wikidata.org/wiki/Q105658620 - 12-13 + + Work + Product of force and displacement. + Work + http://qudt.org/vocab/quantitykind/Work + Product of force and displacement. + 4-28.4 + https://doi.org/10.1351/goldbook.W06684 - + - - FibDic + + ICI - The FIB-DIC (Focused Ion Beam - Digital Image Correlation) ring-core technique is a powerful method for measuring residual stresses in materials. It is based on milling a ring-shaped sample, or core, from the material of interest using a focused ion beam (FIB). - FIBDICResidualStressAnalysis - FibDic - The FIB-DIC (Focused Ion Beam - Digital Image Correlation) ring-core technique is a powerful method for measuring residual stresses in materials. It is based on milling a ring-shaped sample, or core, from the material of interest using a focused ion beam (FIB). + electrochemical method that measures the voltage response of an electrochemical cell under galvanostatic conditions to short interruptions in the current + IntermittentCurrentInterruptionMethod + ICI + electrochemical method that measures the voltage response of an electrochemical cell under galvanostatic conditions to short interruptions in the current - - - - BondedAtom - A real bond between atoms is always something hybrid between covalent, metallic and ionic. + + + StandardUnit + A reference unit provided by a reference material. +International vocabulary of metrology (VIM) + ReferenceMaterial + StandardUnit + A reference unit provided by a reference material. +International vocabulary of metrology (VIM) + Arbitrary amount-of-substance concentration of lutropin in a given sample of plasma (WHO international standard 80/552): 5.0 International Unit/l + -In general, metallic and ionic bonds have atoms sharing electrons. - An bonded atom that shares at least one electron to the atom-based entity of which is part of. - The bond types that are covered by this definition are the strong electonic bonds: covalent, metallic and ionic. - This class can be used to represent molecules as simplified quantum systems, in which outer molecule shared electrons are un-entangled with the inner shells of the atoms composing the molecule. - BondedAtom - An bonded atom that shares at least one electron to the atom-based entity of which is part of. + + + + + Gyroradius + Radius of the circular movement of an electrically charged particle in a magnetic field. + LarmorRadius + Gyroradius + https://www.wikidata.org/wiki/Q1194458 + 10-17 + Radius of the circular movement of an electrically charged particle in a magnetic field. - - - - - - - - + + - - + + - - Atom - A standalone atom has direct part one 'nucleus' and one 'electron_cloud'. - -An O 'atom' within an O₂ 'molecule' is an 'e-bonded_atom'. - -In this material branch, H atom is a particular case, with respect to higher atomic number atoms, since as soon as it shares its electron it has no nucleus entangled electron cloud. - -We cannot say that H₂ molecule has direct part two H atoms, but has direct part two H nucleus. - An 'atom' is a 'nucleus' surrounded by an 'electron_cloud', i.e. a quantum system made of one or more bounded electrons. - ChemicalElement - Atom - A standalone atom has direct part one 'nucleus' and one 'electron_cloud'. - -An O 'atom' within an O₂ 'molecule' is an 'e-bonded_atom'. - -In this material branch, H atom is a particular case, with respect to higher atomic number atoms, since as soon as it shares its electron it has no nucleus entangled electron cloud. + + + DirectionDistributionOfCrossSection + Differential quotient of the cross section for scattering a particle in a given direction and the solid angle around that direction. + DirectionDistributionOfCrossSection + https://qudt.org/vocab/quantitykind/AngularCrossSection + https://www.wikidata.org/wiki/Q98266630 + 10-39 + Differential quotient of the cross section for scattering a particle in a given direction and the solid angle around that direction. + -We cannot say that H₂ molecule has direct part two H atoms, but has direct part two H nucleus. - An 'atom' is a 'nucleus' surrounded by an 'electron_cloud', i.e. a quantum system made of one or more bounded electrons. + + + + LightAndRadiationQuantity + Quantities categorised according to ISO 80000-7. + LightAndRadiationQuantity + Quantities categorised according to ISO 80000-7. - + - - - TotalAngularMomentum - Vector quantity in a quantum system composed of the vectorial sum of angular momentum L and spin s. - TotalAngularMomentum - https://qudt.org/vocab/quantitykind/TotalAngularMomentum - https://www.wikidata.org/wiki/Q97496506 - 10-11 - Vector quantity in a quantum system composed of the vectorial sum of angular momentum L and spin s. + + ISO80000Categorised + ISO80000Categorised - + - + - AngularMomentum - Measure of the extent and direction an object rotates about a reference point. - AngularMomentum - http://qudt.org/vocab/quantitykind/AngularMomentum - 4-11 - https://doi.org/10.1351/goldbook.A00353 + ModulusOfElasticity + Mechanical property of linear elastic solid materials. + YoungsModulus + ModulusOfElasticity + https://www.wikidata.org/wiki/Q2091584 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-67 + 4-19.1 + Mechanical property of linear elastic solid materials. + https://doi.org/10.1351/goldbook.M03966 - + + + + + RelativeMassDefect + Quotient of mass defect and the unified atomic mass constant. + RelativeMassDefect + https://qudt.org/vocab/quantitykind/RelativeMassDefect + https://www.wikidata.org/wiki/Q98038718 + 10-22.2 + Quotient of mass defect and the unified atomic mass constant. + + + - T-3 L+2 M+1 I0 Θ-1 N0 J0 + T-1 L+3 M0 I0 Θ0 N0 J0 - ThermalConductanceUnit - ThermalConductanceUnit + VolumePerTimeUnit + VolumePerTimeUnit - + - - - WaveVector - Vector k in the expression ω t−k⋅r+ϑ0 of the phase of a sinusoidal wave. - WaveVector - https://www.wikidata.org/wiki/Q657009 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-10-09 - 3-21 - Vector k in the expression ω t−k⋅r+ϑ0 of the phase of a sinusoidal wave. - https://en.wikipedia.org/wiki/Wave_vector - - - - - ResemblanceIcon - An icon that focus on WHERE/WHEN the object is, in the sense of spatial or temporal shape. - An icon that mimics the spatial or temporal shape of the object. - The subclass of icon inspired by Peirceian category a) the image, which depends on a simple quality (e.g. picture). - ResemblanceIcon - An icon that mimics the spatial or temporal shape of the object. - A geographical map that imitates the shape of the landscape and its properties at a specific historical time. - An icon that focus on WHERE/WHEN the object is, in the sense of spatial or temporal shape. + + + NeutronNumber + Atomic number (proton number) plus neutron number equals mass number. + Number of neutrons in an atomic nucleus. + NeutronNumber + https://www.wikidata.org/wiki/Q970319 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-05-34 + 10-1.2 + Number of neutrons in an atomic nucleus. + Atomic number (proton number) plus neutron number equals mass number. + https://en.wikipedia.org/wiki/Neutron_number + https://doi.org/10.1351/goldbook.N04119 - + - T-1 L-4 M+1 I0 Θ0 N0 J0 + T-2 L-1 M+1 I0 Θ0 N0 J0 - MassPerQuarticLengthTimeUnit - MassPerQuarticLengthTimeUnit + PressureUnit + PressureUnit - - - - ProcessEngineeringProcess - Deals with entities that have a undefined shape. Undefined means that the actual shape of the entity that is produced is not relevant for the definition of the process. -In fact, everything has a shape, but in process engineering this is not relevant. + + + + + MeanDurationOfLife + Reciprocal of the decay constant λ. + MeanLifeTime + MeanDurationOfLife + https://qudt.org/vocab/quantitykind/MeanLifetime + https://www.wikidata.org/wiki/Q1758559 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-13 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-04-47 + 10-25 + Reciprocal of the decay constant λ. + -e.g. the fact that steel comes in sheets is not relevant for the definition of steel material generated in a steel-making process. - ProcessEngineeringProcess - Deals with entities that have a undefined shape. Undefined means that the actual shape of the entity that is produced is not relevant for the definition of the process. -In fact, everything has a shape, but in process engineering this is not relevant. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + BlueQuark + BlueQuark + -e.g. the fact that steel comes in sheets is not relevant for the definition of steel material generated in a steel-making process. - https://de.wikipedia.org/wiki/Verfahrenstechnik + + + + + + + + + + + + + + SimulationLanguage + A computer language used to describe simulations. + SimulationLanguage + A computer language used to describe simulations. + https://en.wikipedia.org/wiki/Simulation_language - - - - Shape4x3Matrix - A real matrix with shape 4x3. - Shape4x3Matrix - A real matrix with shape 4x3. + + + + ModellingLanguage + An artificial computer language used to express information or knowledge, often for use in computer system design. + ModellingLanguage + An artificial computer language used to express information or knowledge, often for use in computer system design. + Architecture description language – used as a language (or a conceptual model) to describe and represent system architectures. + Hardware description language – used to model integrated circuits. + +Architecture description language – used as a language (or a conceptual model) to describe and represent system architectures. + +Algebraic Modeling Language which is a high-level programming languages for describing and solving high complexity problems like large-scale optimisation. + https://en.wikipedia.org/wiki/Modeling_language - - + + - - + + - - Matrix - 2-dimensional array who's spatial direct parts are vectors. - 2DArray - Matrix - 2-dimensional array who's spatial direct parts are vectors. - - - - - - - - - - - - - - - - - - - - - Dispersion - A material in which distributed particles of one phase are dispersed in a different continuous phase. - Dispersion - A material in which distributed particles of one phase are dispersed in a different continuous phase. + + + LinearEnergyTransfer + Measure for the energy lost by charged particles per traversed distance, including only interactions up to a given energy. + LinearEnergyTransfer + https://qudt.org/vocab/quantitykind/LinearEnergyTransfer + https://www.wikidata.org/wiki/Q1699996 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-30 + 10-85 + Measure for the energy lost by charged particles per traversed distance, including only interactions up to a given energy. + https://doi.org/10.1351/goldbook.L03550 - - - - - SolidSolution - A solid solution made of two or more component substances. - SolidSolution - A solid solution made of two or more component substances. + + + + LevelOfAutomation + + Describes the level of automation of the test. + LevelOfAutomation + Describes the level of automation of the test. - + - - - LondonPenetrationDepth - Distance a magnetic field penetrates the plane surface of a semi-finite superconductor. - LondonPenetrationDepth - https://qudt.org/vocab/quantitykind/LondonPenetrationDepth - https://www.wikidata.org/wiki/Q3277853 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=815-10-33 - 12-38.1 - Distance a magnetic field penetrates the plane surface of a semi-finite superconductor. + + + AlphaDisintegrationEnergy + Sum of the kinetic energy of the α-particle produced in the disintegration process and the recoil energy of the product atom in a reference frame in which the emitting nucleus is at rest before its disintegration. + AlphaDisintegrationEnergy + http://qudt.org/vocab/quantitykind/AlphaDisintegrationEnergy + https://www.wikidata.org/wiki/Q98146025 + 10-32 + Sum of the kinetic energy of the α-particle produced in the disintegration process and the recoil energy of the product atom in a reference frame in which the emitting nucleus is at rest before its disintegration. - + - - TotalCurrent - Sum of electric current and displacement current - TotalCurrent - https://qudt.org/vocab/quantitykind/TotalCurrent - https://www.wikidata.org/wiki/Q77679732 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-45 - 6-19.2 - Sum of electric current and displacement current - - - - - - - - - - - - - MathematicalModel - A mathematical model can be defined as a description of a system using mathematical concepts and language to facilitate proper explanation of a system or to study the effects of different components and to make predictions on patterns of behaviour. - -Abramowitz and Stegun, 1968 - An analogical icon expressed in mathematical language. - MathematicalModel - An analogical icon expressed in mathematical language. + + + ElementaryCharge + The DBpedia definition (http://dbpedia.org/page/Elementary_charge) is outdated as May 20, 2019. It is now an exact quantity. + The magnitude of the electric charge carried by a single electron. It defines the base unit Ampere in the SI system. + ElementaryCharge + http://qudt.org/vocab/quantitykind/ElementaryCharge + 10-5.1 + The magnitude of the electric charge carried by a single electron. It defines the base unit Ampere in the SI system. + https://doi.org/10.1351/goldbook.E02032 - + - + + - Stress - Force per unit oriented surface area . - Measure of the internal forces that neighboring particles of a continuous material exert on each other. - Stress - http://qudt.org/vocab/quantitykind/Stress - 4-15 + + ElectricCharge + The physical property of matter that causes it to experience a force when placed in an electromagnetic field. + Charge + ElectricCharge + http://qudt.org/vocab/quantitykind/ElectricCharge + https://www.wikidata.org/wiki/Q1111 + 6-2 + The physical property of matter that causes it to experience a force when placed in an electromagnetic field. + https://doi.org/10.1351/goldbook.E01923 - + + + + PlasticModeling + PlasticModeling + + + + + + FormingFromPlastic + FormingFromPlastic + + + - + - - ModulusOfElasticity - Mechanical property of linear elastic solid materials. - YoungsModulus - ModulusOfElasticity - https://www.wikidata.org/wiki/Q2091584 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-67 - 4-19.1 - Mechanical property of linear elastic solid materials. - https://doi.org/10.1351/goldbook.M03966 + + ParticleCurrentDensity + Number of particles per time and area crossing a surface. + ParticleCurrentDensity + https://qudt.org/vocab/quantitykind/ParticleCurrent + https://www.wikidata.org/wiki/Q2400689 + 10-48 + Number of particles per time and area crossing a surface. - + - - - FermiEnergy - in a metal, highest occupied energy level at zero thermodynamic temperature, where energy level means the energy of an electron in the interior of a substance - FermiEnergy - https://qudt.org/vocab/quantitykind/FermiEnergy - https://www.wikidata.org/wiki/Q431335 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-06-18 - 12-27.1 - in a metal, highest occupied energy level at zero thermodynamic temperature, where energy level means the energy of an electron in the interior of a substance - https://doi.org/10.1351/goldbook.F02340 + + CurrentLinkage + For a closed path, scalar quantity equal to the electric current through any surface bounded by the path. + CurrentLinkage + https://qudt.org/vocab/quantitykind/CurrentLinkage + https://www.wikidata.org/wiki/Q77995703 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-46 + 6-37.4 + For a closed path, scalar quantity equal to the electric current through any surface bounded by the path. - - - - CharacterisationExperiment - A characterisation experiment is the process by which a material's structure and properties are probed and measured. It is a fundamental process in the field of materials science, without which no scientific understanding of engineering materials could be ascertained. - A characterisation experiment is the process by which a material's structure and properties are probed and measured. It is a fundamental process in the field of materials science, without which no scientific understanding of engineering materials could be ascertained. - CharacterisationExperiment - A characterisation experiment is the process by which a material's structure and properties are probed and measured. It is a fundamental process in the field of materials science, without which no scientific understanding of engineering materials could be ascertained. + + + + + + + + + + + ElectricCurrent + A flow of electric charge. + ElectricCurrent + http://qudt.org/vocab/quantitykind/ElectricCurrent + 6-1 + A flow of electric charge. + https://doi.org/10.1351/goldbook.E01927 - - - - - Stage - A process which is an holistic temporal part of a process. - Stage - A process which is an holistic temporal part of a process. - Moving a leg is a stage of the process of running. + + + + + + + + + + + TotalMassStoppingPower + Quotient of the total linear stopping power S and the mass density ρ of the material. + MassStoppingPower + TotalMassStoppingPower + https://qudt.org/vocab/quantitykind/TotalMassStoppingPower + https://www.wikidata.org/wiki/Q98642795 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-12-52 + 10-55 + Quotient of the total linear stopping power S and the mass density ρ of the material. - - - - FreezingPointDepressionOsmometry - - The general principle of freezing point depression osmometry involves the relationship between the number of moles of dissolved solute in a solution and the change in freezing point. - FreezingPointDepressionOsmometry - The general principle of freezing point depression osmometry involves the relationship between the number of moles of dissolved solute in a solution and the change in freezing point. + + + + + + + T+2 L0 M+1 I0 Θ0 N0 J0 + + + MassSquareTimeUnit + MassSquareTimeUnit - + - - Osmometry + + NormalPulseVoltammetry - Osmometry is an advanced analytical method for determining the osmotic concentration of solutions. The osmotic – or solute – concentration of a colloidal system is expressed in osmoles (Osm) per unit of volume (Osm/L) or weight (Osm/kg). - Osmometry - Osmometry is an advanced analytical method for determining the osmotic concentration of solutions. The osmotic – or solute – concentration of a colloidal system is expressed in osmoles (Osm) per unit of volume (Osm/L) or weight (Osm/kg). + Normal pulse polarography is NPV in which a dropping mercury electrode is used as the working electrode. A pulse is applied just before the mechanically enforced end of the drop. The pulse width is usually 10 to 20 % of the drop time. The drop dislodgment is synchro- nized with current sampling, which is carried out just before the end of the pulse, as in NPV. + Sigmoidal wave-shaped voltammograms are obtained. + The current is sampled at the end of the pulse and then plotted versus the potential of the pulse. + The current is sampled just before the end of the pulse, when the charging current is greatly diminished. In this way, the ratio of faradaic current to charging current is enhanced and the negative influence of charging current is partially eliminated. Due to the improved signal (faradaic current) to noise (charging current) ratio, the limit of detec- tion is lowered. + The sensitivity of NPV is not affected by the reversibility of the electrode reaction of the analyte. + voltammetry in which potential pulses of amplitude increasing by a constant increment and with a pulse width of 2 to 200 ms are superimposed on a constant initial potential + NPV + NormalPulseVoltammetry + voltammetry in which potential pulses of amplitude increasing by a constant increment and with a pulse width of 2 to 200 ms are superimposed on a constant initial potential + https://doi.org/10.1515/pac-2018-0109 - + - - PrincipalQuantumNumber - Atomic quantum number related to the number n−1 of radial nodes of one-electron wave functions. - PrincipalQuantumNumber - https://qudt.org/vocab/quantitykind/PrincipalQuantumNumber - https://www.wikidata.org/wiki/Q867448 - 10-13.2 - Atomic quantum number related to the number n−1 of radial nodes of one-electron wave functions. + + + BindingFraction + The ratio of the binding energy of a nucleus to the atomic mass number. + BindingFraction + https://qudt.org/vocab/quantitykind/BindingFraction + https://www.wikidata.org/wiki/Q98058362 + 10-23.2 + The ratio of the binding energy of a nucleus to the atomic mass number. - + - - + - - T+2 L-2 M-1 I+2 Θ0 N0 J0 + + - - MagneticReluctanceUnit - MagneticReluctanceUnit + + + + EnergyDistributionOfCrossSection + Differential quotient of the cross section for a process and the energy of the scattered particle. + EnergyDistributionOfCrossSection + https://qudt.org/vocab/quantitykind/SpectralCrossSection + https://www.wikidata.org/wiki/Q98267245 + 10-40 + Differential quotient of the cross section for a process and the energy of the scattered particle. - - - - ComputerSystem - Electronic device capable of processing data, typically in binary form, according to instructions given to it in a variable program. - Computer - ComputerSystem - Electronic device capable of processing data, typically in binary form, according to instructions given to it in a variable program. - https://en.wikipedia.org/wiki/Computer + + + + IterativeCoupledModelsSimulation + A chain of linked physics based model simulations solved iteratively, where equations are segregated. + IterativeCoupledModelsSimulation + A chain of linked physics based model simulations solved iteratively, where equations are segregated. + + + + + + + + + + + + + + Coupled + Coupled @@ -11487,1642 +10342,1848 @@ Abramowitz and Stegun, 1968 C:\\Users\\John\\Desktop (DOS-like path) - - - GreenCharmAntiQuark - GreenCharmAntiQuark - - - - - - IntentionalAgent - An agent that is driven by the intention to reach a defined objective in driving a process. - Intentionality is not limited to human agents, but in general to all agents that have the capacity to decide to act in driving a process according to a motivation. - IntentionalAgent - An agent that is driven by the intention to reach a defined objective in driving a process. - Intentionality is not limited to human agents, but in general to all agents that have the capacity to decide to act in driving a process according to a motivation. - - - - - DataSet - Encoded data made of more than one datum. - DataSet - Encoded data made of more than one datum. - - - - - - AtomProbeTomography - Atom Probe Tomography (APT or 3D Atom Probe) is the only material analysis technique offering extensive capabilities for both 3D imaging and chemical composition measurements at the atomic scale (around 0.1-0.3nm resolution in depth and 0.3-0.5nm laterally). Since its early developments, Atom Probe Tomography has contributed to major advances in materials science. The sample is prepared in the form of a very sharp tip. The cooled tip is biased at high DC voltage (3-15 kV). The very small radius of the tip and the High Voltage induce a very high electrostatic field (tens V/nm) at the tip surface, just below the point of atom evaporation. Under laser or HV pulsing, one or more atoms are evaporated from the surface, by field effect (near 100% ionization), and projected onto a Position Sensitive Detector (PSD) with a very high detection efficiency. Ion efficiencies are as high as 80%, the highest analytical efficiency of any 3D microscopy. - 3D Atom Probe - APT - AtomProbeTomography - Atom Probe Tomography (APT or 3D Atom Probe) is the only material analysis technique offering extensive capabilities for both 3D imaging and chemical composition measurements at the atomic scale (around 0.1-0.3nm resolution in depth and 0.3-0.5nm laterally). Since its early developments, Atom Probe Tomography has contributed to major advances in materials science. The sample is prepared in the form of a very sharp tip. The cooled tip is biased at high DC voltage (3-15 kV). The very small radius of the tip and the High Voltage induce a very high electrostatic field (tens V/nm) at the tip surface, just below the point of atom evaporation. Under laser or HV pulsing, one or more atoms are evaporated from the surface, by field effect (near 100% ionization), and projected onto a Position Sensitive Detector (PSD) with a very high detection efficiency. Ion efficiencies are as high as 80%, the highest analytical efficiency of any 3D microscopy. - - - - - - Tomography - Tomography is imaging by sections or sectioning that uses any kind of penetrating wave. The method is used in radiology, archaeology, biology, atmospheric science, geophysics, oceanography, plasma physics, materials science, cosmochemistry, astrophysics, quantum information, and other areas of science. The word tomography is derived from Ancient Greek τόμος tomos, "slice, section" and γράφω graphō, "to write" or, in this context as well, "to describe." A device used in tomography is called a tomograph, while the image produced is a tomogram. - Tomography - Tomography is imaging by sections or sectioning that uses any kind of penetrating wave. The method is used in radiology, archaeology, biology, atmospheric science, geophysics, oceanography, plasma physics, materials science, cosmochemistry, astrophysics, quantum information, and other areas of science. The word tomography is derived from Ancient Greek τόμος tomos, "slice, section" and γράφω graphō, "to write" or, in this context as well, "to describe." A device used in tomography is called a tomograph, while the image produced is a tomogram. - - - + - - GroupVelocity - Speed with which the envelope of a wave propagates in space. - GroupSpeed - GroupVelocity - https://www.wikidata.org/wiki/Q217361 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-10-15 - https://dbpedia.org/page/Group_velocity - 3-23.2 - Speed with which the envelope of a wave propagates in space. - https://en.wikipedia.org/wiki/Group_velocity + + + + + + + + + SpecificActivity + Quotient of the activity A of a sample and the mass m of that sample. + MassicActivity + SpecificActivity + https://qudt.org/vocab/quantitykind/SpecificActivity + https://www.wikidata.org/wiki/Q2823748 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-08 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-04-43 + 10-28 + Quotient of the activity A of a sample and the mass m of that sample. + https://doi.org/10.1351/goldbook.S05790 - + - - - MigrationArea - Sum of the slowing-down area from fission energy to thermal energy and the diffusion area for thermal neutrons. - MigrationArea - https://qudt.org/vocab/quantitykind/MigrationArea - https://www.wikidata.org/wiki/Q98966325 - 10-72.3 - Sum of the slowing-down area from fission energy to thermal energy and the diffusion area for thermal neutrons. + + KineticEnergy + The energy of an object due to its motion. + KineticEnergy + http://qudt.org/vocab/quantitykind/KineticEnergy + 4-28.2 + The energy of an object due to its motion. + https://doi.org/10.1351/goldbook.K03402 - - - - - - - - - - - - SemioticObject - Here is assumed that the concept of 'object' is always relative to a 'semiotic' process. An 'object' does not exists per se, but it's always part of an interpretation. - -The EMMO relies on strong reductionism, i.e. everything real is a formless collection of elementary particles: we give a meaning to real world entities only by giving them boundaries and defining them using 'sign'-s. - -In this way the 'sign'-ed entity becomes an 'object', and the 'object' is the basic entity needed in order to apply a logical formalism to the real world entities (i.e. we can speak of it through its sign, and use logics on it through its sign). - The object, in Peirce semiotics, as participant to a semiotic process. - Object - SemioticObject - The object, in Peirce semiotics, as participant to a semiotic process. + + + + + + + + + + + + + BaseUnit + A set of units that correspond to the base quantities in a system of units. + BaseUnit + A set of units that correspond to the base quantities in a system of units. + base unit - - - + + + + - - - T0 L0 M+1 I0 Θ0 N-1 J0 - + + + + + + - MassPerAmountUnit - MassPerAmountUnit + Hadron + Particles composed of two or more quarks. + Hadron + Particles composed of two or more quarks. + https://en.wikipedia.org/wiki/Hadron - - + + + Tau + The class of individuals that stand for tau elementary particles belonging to the third generation of leptons. + Tau + The class of individuals that stand for tau elementary particles belonging to the third generation of leptons. + https://en.wikipedia.org/wiki/Tau_(particle) + + + + - T0 L+1 M0 I0 Θ0 N-1 J0 + T-2 L+3 M-1 I0 Θ0 N0 J0 - LengthPerAmountUnit - LengthPerAmountUnit + NewtonianConstantOfGravityUnit + NewtonianConstantOfGravityUnit - + - - InternalEnergy - A state quantity equal to the difference between the total energy of a system and the sum of the macroscopic kinetic and potential energies of the system. - ThermodynamicEnergy - InternalEnergy - http://qudt.org/vocab/quantitykind/InternalEnergy - 5.20-2 - A state quantity equal to the difference between the total energy of a system and the sum of the macroscopic kinetic and potential energies of the system. - https://doi.org/10.1351/goldbook.I03103 + + + LossAngle + Arctan of the loss factor + LossAngle + https://www.qudt.org/vocab/quantitykind/LossAngle + https://www.wikidata.org/wiki/Q20820438 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-49 + 6-55 + Arctan of the loss factor - + + - - GFactorOfNucleusOrNuclearParticle - Quotient of the magnetic dipole moment of an atom, and the product of the nuclear spin quantum number and the nuclear magneton. - NuclearGFactor - GFactorOfNucleusOrNuclearParticle - https://qudt.org/vocab/quantitykind/GFactorOfNucleus - https://www.wikidata.org/wiki/Q97591250 - 10-14.2 - Quotient of the magnetic dipole moment of an atom, and the product of the nuclear spin quantum number and the nuclear magneton. + LevelWidth + In nuclear physics, quotient of the reduced Planck constant and the mean duration of life of an unstable particle or an excited state. + LevelWidth + https://qudt.org/vocab/quantitykind/LevelWidth + https://www.wikidata.org/wiki/Q98082340 + 10-26 + In nuclear physics, quotient of the reduced Planck constant and the mean duration of life of an unstable particle or an excited state. + https://doi.org/10.1351/goldbook.L03507 - + - + - - ModulusOfRigidity - Ratio of shear stress to the shear strain. - ShearModulus - ModulusOfRigidity - https://qudt.org/vocab/quantitykind/ShearModulus - https://www.wikidata.org/wiki/Q461466 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-68 - 4-19.2 - Ratio of shear stress to the shear strain. - https://doi.org/10.1351/goldbook.S05635 - - - - - - - - - T0 L-2 M0 I0 Θ0 N0 J0 - - - PerAreaUnit - PerAreaUnit + AngularAcceleration + vector quantity giving the rate of change of angular velocity + AngularAcceleration + https://qudt.org/vocab/quantitykind/AngularAcceleration + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-01-46 + https://dbpedia.org/page/Angular_acceleration + 3-13 + vector quantity giving the rate of change of angular velocity + https://en.wikipedia.org/wiki/Angular_acceleration - - - - - - - - - - - - - - SimulationLanguage - A computer language used to describe simulations. - SimulationLanguage - A computer language used to describe simulations. - https://en.wikipedia.org/wiki/Simulation_language + + + + + + ScientificTheory + A scientific theory is a description, objective and observed, produced with scientific methodology. + ScientificTheory + A scientific theory is a description, objective and observed, produced with scientific methodology. - - - - ModellingLanguage - An artificial computer language used to express information or knowledge, often for use in computer system design. - ModellingLanguage - An artificial computer language used to express information or knowledge, often for use in computer system design. - Architecture description language – used as a language (or a conceptual model) to describe and represent system architectures. - Hardware description language – used to model integrated circuits. - -Architecture description language – used as a language (or a conceptual model) to describe and represent system architectures. - -Algebraic Modeling Language which is a high-level programming languages for describing and solving high complexity problems like large-scale optimisation. - https://en.wikipedia.org/wiki/Modeling_language + + + Observed + Observed + The biography of a person met by the author. - + - - AverageLogarithmicEnergyDecrement - Average value of the increment of the lethargy per collision. - AverageLogarithmicEnergyDecrement - https://qudt.org/vocab/quantitykind/AverageLogarithmicEnergyDecrement.html - https://www.wikidata.org/wiki/Q1940739 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-07-02 - 10-70 - Average value of the increment of the lethargy per collision. - - - - - - VoltammetryAtARotatingDiskElectrode - Hydrodynamic voltammetry using a a rotating disc electrode, where the limiting current is described by the Levich equation - VoltammetryAtARotatingDiskElectrode - Hydrodynamic voltammetry using a a rotating disc electrode, where the limiting current is described by the Levich equation - https://doi.org/10.1515/pac-2018-0109 + + DiffusionCoefficientForParticleNumberDensity + Proportionality constant between the particle current density J and the gradient of the particle number density n. + DiffusionCoefficientForParticleNumberDensity + https://www.wikidata.org/wiki/Q98875545 + 10-64 + Proportionality constant between the particle current density J and the gradient of the particle number density n. - + - - + + + + + + + - ThermalDiffusionFactor - Quotient of the thermal diffusion ratio and the product of the local amount-of-substance fractions. - ThermalDiffusionFactor - https://qudt.org/vocab/quantitykind/ThermalDiffusionFactor - https://www.wikidata.org/wiki/Q96249629 - 9-40.2 - Quotient of the thermal diffusion ratio and the product of the local amount-of-substance fractions. + DiffusionCoefficient + Proportionality constant in some physical laws. + DiffusionCoefficient + Proportionality constant in some physical laws. - - - - - ThermalDiffusionRatio - ThermalDiffusionRatio - https://qudt.org/vocab/quantitykind/ThermalDiffusionRatio - https://www.wikidata.org/wiki/Q96249433 - 9-40.1 - + + + + + + + + + + + + + + + + Atom + A standalone atom has direct part one 'nucleus' and one 'electron_cloud'. - - - - - PlanckConstant - The quantum of action. It defines the kg base unit in the SI system. - PlanckConstant - http://qudt.org/vocab/constant/PlanckConstant - The quantum of action. It defines the kg base unit in the SI system. - https://doi.org/10.1351/goldbook.P04685 - +An O 'atom' within an O₂ 'molecule' is an 'e-bonded_atom'. + +In this material branch, H atom is a particular case, with respect to higher atomic number atoms, since as soon as it shares its electron it has no nucleus entangled electron cloud. + +We cannot say that H₂ molecule has direct part two H atoms, but has direct part two H nucleus. + An 'atom' is a 'nucleus' surrounded by an 'electron_cloud', i.e. a quantum system made of one or more bounded electrons. + ChemicalElement + Atom + A standalone atom has direct part one 'nucleus' and one 'electron_cloud'. - - - - Assemblying - No loss or adds of parts by the components, nor merging. In assemblying parts are losing some of theirs movement degrees of freedom. - The act of connecting together the parts of something - Assemblying - The act of connecting together the parts of something - No loss or adds of parts by the components, nor merging. In assemblying parts are losing some of theirs movement degrees of freedom. +An O 'atom' within an O₂ 'molecule' is an 'e-bonded_atom'. + +In this material branch, H atom is a particular case, with respect to higher atomic number atoms, since as soon as it shares its electron it has no nucleus entangled electron cloud. + +We cannot say that H₂ molecule has direct part two H atoms, but has direct part two H nucleus. + An 'atom' is a 'nucleus' surrounded by an 'electron_cloud', i.e. a quantum system made of one or more bounded electrons. - - - - NuclearSpinQuantumNumber - Quantum number related to the total angular momentum, J, of a nucleus in any specified state, normally called nuclear spin. - NuclearSpinQuantumNumber - https://qudt.org/vocab/quantitykind/NuclearSpinQuantumNumber - https://www.wikidata.org/wiki/Q97577403 - 10-13.7 - Quantum number related to the total angular momentum, J, of a nucleus in any specified state, normally called nuclear spin. + + + + AnalyticalElectronMicroscopy + Analytical electron microscopy (AEM) refers to the collection of spectroscopic data in TEM or STEM, enabling qualitative or quantitative compositional analysis. + AnalyticalElectronMicroscopy + Analytical electron microscopy (AEM) refers to the collection of spectroscopic data in TEM or STEM, enabling qualitative or quantitative compositional analysis. - - - - ProgrammingLanguage - A language object that follows syntactic rules of a programming language. - A programming language object can also be a fragment (e.g. a C function) not suitable for exectution. - Code - SoftwareCode - ProgrammingLanguage - A language object that follows syntactic rules of a programming language. - A programming language object can also be a fragment (e.g. a C function) not suitable for exectution. - Entities are not necessarily digital data, but can be code fragments printed on paper. + + + + Nanoindentation + + Nanoindentation (known also as nanoindentation test) is a method for testing the hardness and related mechanical properties of materials, facilitated by high-precision instrumentation in the nanometer scale, as well as analytical and computational algorithms for result evaluation. + Nanoindentation + Nanoindentation (known also as nanoindentation test) is a method for testing the hardness and related mechanical properties of materials, facilitated by high-precision instrumentation in the nanometer scale, as well as analytical and computational algorithms for result evaluation. + By definition, when someone performs nanoindentation, it refers to either quasistatic or continuous stiffness measurement. However, in reality with a nanoindenter it is also possible to perform scratch testing, scanning probe microscopy, and apply non-contact surface energy mapping, which can also be called nanoindentation, because they are measurements conducted using an nanoindenter. - - - - - ResidualResistivity - for metals, the resistivity extrapolated to zero thermodynamic temperature - ResidualResistivity - https://qudt.org/vocab/quantitykind/ResidualResistivity - https://www.wikidata.org/wiki/Q25098876 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=815-13-61 - 12-17 - for metals, the resistivity extrapolated to zero thermodynamic temperature + + + BlueCharmQuark + BlueCharmQuark - - - - SpecificHeatCapacityAtSaturatedVaporPressure - Specific heat capacity at saturated vaport pressure. - SpecificHeatCapacityAtSaturatedVaporPressure - https://qudt.org/vocab/quantitykind/SpecificHeatCapacityAtSaturation - https://www.wikidata.org/wiki/Q75775005 - 5-16.4 - Specific heat capacity at saturated vaport pressure. + + + + HardnessTesting + + A test to determine the resistance a material exhibits to permanent deformation by penetration of another harder material. + HardnessTesting + A test to determine the resistance a material exhibits to permanent deformation by penetration of another harder material. - + - + - - PeltierCoefficient - Quotient of Peltier heat power developed at a junction, and the electric current flowing from substance a to substance b. - PeltierCoefficient - https://qudt.org/vocab/quantitykind/PeltierCoefficient - https://www.wikidata.org/wiki/Q105801003 - 12-22 - Quotient of Peltier heat power developed at a junction, and the electric current flowing from substance a to substance b. + Illuminance + The total luminous flux incident on a surface, per unit area. + Illuminance + http://qudt.org/vocab/quantitykind/Illuminance + The total luminous flux incident on a surface, per unit area. + https://doi.org/10.1351/goldbook.I02941 - - + + - - - - - - + + - - CharacterisationMeasurementTask - - Used to break-down a CharacterisationMeasurementProcess into his specific tasks. - CharacterisationMeasurementTask - Used to break-down a CharacterisationMeasurementProcess into his specific tasks. + + + MolarMass + Mass per amount of substance. + MolarMass + https://qudt.org/vocab/quantitykind/MolarMass + https://www.wikidata.org/wiki/Q145623 + 9-4 + Mass per amount of substance. - + + + CharacterisationProcedureValidation + Describes why the characterization procedure was chosen and deemed to be the most useful for the sample. + CharacterisationProcedureValidation + Describes why the characterization procedure was chosen and deemed to be the most useful for the sample. + + + + + + Procedure + A procedure can be considered as an intentional process with a plan. + The process in which an agent works with some entities according to some existing formalised operative rules. + The set of established forms or methods of an organized body for accomplishing a certain task or tasks (Wiktionary). + Elaboration + Work + Procedure + The set of established forms or methods of an organized body for accomplishing a certain task or tasks (Wiktionary). + The process in which an agent works with some entities according to some existing formalised operative rules. + The process in which a control unit of a CPU (the agent) orchestrates some cached binary data according to a list of instructions (e.g. a program). +The process in which a librarian order books alphabetically on a shelf. +The execution of an algorithm. + A procedure can be considered as an intentional process with a plan. + + + + - - - - - - + + - - - - - - - - - - CharacterisationTask + + + ParticleFluence + Differential quotient of N with respect to a, where N is the number of particles incident on a sphere of cross-sectional area a. + ParticleFluence + https://qudt.org/vocab/quantitykind/ParticleFluence + https://www.wikidata.org/wiki/Q82965908 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-15 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-04-18 + 10-43 + Differential quotient of N with respect to a, where N is the number of particles incident on a sphere of cross-sectional area a. + + + + + + ACVoltammetry - CharacterisationTask + The resulting alternating current is plotted versus imposed DC potential. The obtained AC voltammogram is peak-shaped. + voltammetry in which a sinusoidal alternating potential of small amplitude (10 to 50 mV) of constant frequency (10 Hz to 100 kHz) is superimposed on a slowly and linearly varying potential ramp + ACV + ACVoltammetry + https://www.wikidata.org/wiki/Q120895154 + voltammetry in which a sinusoidal alternating potential of small amplitude (10 to 50 mV) of constant frequency (10 Hz to 100 kHz) is superimposed on a slowly and linearly varying potential ramp + https://doi.org/10.1515/pac-2018-0109 - + - - MeasuredProperty - A quantity that is the result of a well-defined measurement procedure. - The specification of a measurand requires knowledge of the kind of quantity, description of the state of the phenomenon, body, or substance carrying the quantity, including any relevant component, and the chemical entities involved. + + Variable + A variable is a symbolic object that stands for any other mathematical object, such as number, a vector, a matrix, a function, the argument of a function, a set, an element of a set. + Variable + A variable is a symbolic object that stands for any other mathematical object, such as number, a vector, a matrix, a function, the argument of a function, a set, an element of a set. + x +k + --- VIM - MeasuredProperty - A quantity that is the result of a well-defined measurement procedure. + + + + + + + + + + + ElectricResistance + Inverse of 'ElectricalConductance'. + Measure of the difficulty to pass an electric current through a material. + Resistance + ElectricResistance + http://qudt.org/vocab/quantitykind/Resistance + https://www.wikidata.org/wiki/Q25358 + 6-46 + Measure of the difficulty to pass an electric current through a material. + https://doi.org/10.1351/goldbook.E01936 - + - - Weight - Force of gravity acting on a body. - Weight - http://qudt.org/vocab/quantitykind/Weight - 4-9.2 - https://doi.org/10.1351/goldbook.W06668 + + + BetaDisintegrationEnergy + Sum of the maximum beta-particle kinetic energy and the recoil energy of the atom produced in a reference frame in which the emitting nucleus is at rest before its disintegration. + BetaDisintegrationEnergy + https://www.wikidata.org/wiki/Q98148340 + 10-34 + Sum of the maximum beta-particle kinetic energy and the recoil energy of the atom produced in a reference frame in which the emitting nucleus is at rest before its disintegration. - + - - - - - - - - - Force - Any interaction that, when unopposed, will change the motion of an object - Force - http://qudt.org/vocab/quantitykind/Force - 4-9.1 - Any interaction that, when unopposed, will change the motion of an object - https://doi.org/10.1351/goldbook.F02480 + + + IonTransportNumber + Faction of electrical current carried by given ionic species. + CurrentFraction + TransferrenceNumber + IonTransportNumber + https://qudt.org/vocab/quantitykind/IonTransportNumber + https://www.wikidata.org/wiki/Q331854 + 9-46 + Faction of electrical current carried by given ionic species. + https://doi.org/10.1351/goldbook.I03181 + https://doi.org/10.1351/goldbook.T06489 - + - + - - HeatCapacity - Examples of condition might be constant volume or constant pressure for a gas. - Quantity C = dQ/dT, when the thermodynamic temperature of a system is increased by dT as a result of the addition of a amount of heat dQ, under given condition. - HeatCapacity - https://qudt.org/vocab/quantitykind/HeatCapacity - https://www.wikidata.org/wiki/Q179388 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-47 - https://dbpedia.org/page/Heat_capacity - 5-15 - Quantity C = dQ/dT, when the thermodynamic temperature of a system is increased by dT as a result of the addition of a amount of heat dQ, under given condition. - https://en.wikipedia.org/wiki/Heat_capacity - https://doi.org/10.1351/goldbook.H02753 + + ParticleFluenceRate + Differential quotient of fluence Φ with respect to time. + ParticleFluenceRate + https://qudt.org/vocab/quantitykind/ParticleFluenceRate + https://www.wikidata.org/wiki/Q98497410 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-16 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-04-19 + 10-44 + Differential quotient of fluence Φ with respect to time. - - - - ModelledProperty - A quantity obtained from a well-defined modelling procedure. - ModelledProperty - A quantity obtained from a well-defined modelling procedure. + + + + + + + + + + + + + + CausalParticle + The class of entities that have no spatial structure. + The concept is based on the common usage of the word "particle", that is used to identify both a specific state of an elementary particle (a quantum) and both the chain of quantums that expresses the evolution of the particle in time. + The union of Elementary and Quantum classes. + CausalParticle + The concept is based on the common usage of the word "particle", that is used to identify both a specific state of an elementary particle (a quantum) and both the chain of quantums that expresses the evolution of the particle in time. + The union of Elementary and Quantum classes. + The class of entities that have no spatial structure. - + - T+1 L+2 M0 I0 Θ+1 N0 J0 + T-2 L+2 M+1 I0 Θ-1 N0 J0 - AreaTimeTemperatureUnit - AreaTimeTemperatureUnit + EntropyUnit + EntropyUnit - - + + - T+3 L-3 M-1 I+2 Θ0 N0 J0 + T0 L-3 M0 I0 Θ0 N0 J0 - ElectricConductivityUnit - ElectricConductivityUnit + PerVolumeUnit + PerVolumeUnit - + + + + CalibrationDataPostProcessing + Post-processing of the output of the calibration in order to get the actual calibration data to be used as input for the measurement. + CalibrationDataPostProcessing + Post-processing of the output of the calibration in order to get the actual calibration data to be used as input for the measurement. + + + + + + DataPostProcessing + Analysis, that allows one to calculate the final material property from the calibrated primary data. + DataPostProcessing + Analysis, that allows one to calculate the final material property from the calibrated primary data. + + + + + ExactConstant + Physical constant used to define a unit system. Hence, when expressed in that unit system they have an exact value with no associated uncertainty. + ExactConstant + Physical constant used to define a unit system. Hence, when expressed in that unit system they have an exact value with no associated uncertainty. + + + + + + LiquidPhaseSintering + ISO 3252:2019 Powder metallurgy +liquid-phase sintering: sintering of a powder or compact containing at least two constituents, under conditions such that a liquid phase is formed + LiquidPhaseSintering + + + - + + + + + + + + + + + + + AtomicNumber + Number of protons in an atomic nucleus. + AtomicNumber + http://qudt.org/vocab/quantitykind/AtomicNumber + Number of protons in an atomic nucleus. + 10-1.1 + https://doi.org/10.1351/goldbook.A00499 + + + + + + + + + + + + + + + 1 + + + - - T+4 L0 M-1 I+2 Θ0 N0 J0 + + - SquareCurrentQuarticTimePerMassUnit - SquareCurrentQuarticTimePerMassUnit + Integer + An integer number. + Integer + An integer number. - - - - GravityCasting - GravityCasting + + + + CathodicStrippingVoltammetry + Stripping voltammetry in which material accumulated at the working electrode is electrochemically reduced in the stripping step. A peak-shaped cathodic stripping voltammogram is obtained. Peak current depends on time of accumulation, mass transport of analyte (stirring), scan rate and mode (linear or pulse), and analyte concentration in solution. + CSV + CathodicStrippingVoltammetry + https://www.wikidata.org/wiki/Q4016325 + Stripping voltammetry in which material accumulated at the working electrode is electrochemically reduced in the stripping step. A peak-shaped cathodic stripping voltammogram is obtained. Peak current depends on time of accumulation, mass transport of analyte (stirring), scan rate and mode (linear or pulse), and analyte concentration in solution. + https://doi.org/10.1515/pac-2018-0109 - + - - Casting - Casting + + CoatingManufacturing + A manufacturing in which an adherent layer of amorphous material is applied to a workpiece. + DIN 8580:2020 + Beschichten + CoatingManufacturing + A manufacturing in which an adherent layer of amorphous material is applied to a workpiece. - + - - - - - T0 L0 M0 I0 Θ0 N+1 J0 - - - AmountUnit - AmountUnit + + + Wavenumber + Reciprocal of the wavelength. + Repetency + Wavenumber + https://qudt.org/vocab/quantitykind/Wavenumber + https://www.wikidata.org/wiki/Q192510 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-10-11 + https://dbpedia.org/page/Wavenumber + 3-20 + Reciprocal of the wavelength. + https://en.wikipedia.org/wiki/Wavenumber + https://doi.org/10.1351/goldbook.W06664 - - - Cognised - A semiotic object that is recognised by an interpreter (a cogniser) when establishing a connection between the object and an icon. - Cognised - A semiotic object that is recognised by an interpreter (a cogniser) when establishing a connection between the object and an icon. - A physical phenomenon that is connected to an equation by a scientist. + + + + LiquidGasSuspension + A coarse dispersion of gas in a liquid continuum phase. + LiquidGasSuspension + A coarse dispersion of gas in a liquid continuum phase. + Sparkling water - - - - - - - - - - - - - - - - - - - - - - Icon - A sign that stands for an object by resembling or imitating it, in shape, function or by sharing a similar logical structure. - If object and sign belongs to the same class, then the sign is fuctional, diagrammatic and resemblance. -For example, when a Boeing 747 is used as a sign for another Boeing 747. - In Peirce semiotics three subtypes of icon are possible: -(a) the image, which depends on a simple quality (e.g. picture) -(b) the diagram, whose internal relations, mainly dyadic or so taken, represent by analogy the relations in something (e.g. math formula, geometric flowchart) -(c) the metaphor, which represents the representative character of a sign by representing a parallelism in something else -[Wikipedia] - Model - Simulacrum - Icon - A sign that stands for an object by resembling or imitating it, in shape, function or by sharing a similar logical structure. - A picture that reproduces the aspect of a person. - An equation that reproduces the logical connection of the properties of a physical entity. + + + + String + A physical made of more than one symbol sequentially arranged. + A string is made of concatenated symbols whose arrangement is one-dimensional. Each symbol can have only one previous and one next neighborhood (bidirectional list). + String + A physical made of more than one symbol sequentially arranged. + The word "cat" considered as a collection of 'symbol'-s respecting the rules of english language. + +In this example the 'symbolic' entity "cat" is not related to the real cat, but it is only a word (like it would be to an italian person that ignores the meaning of this english word). + +If an 'interpreter' skilled in english language is involved in a 'semiotic' process with this word, that "cat" became also a 'sign' i.e. it became for the 'interpreter' a representation for a real cat. + A string is made of concatenated symbols whose arrangement is one-dimensional. Each symbol can have only one previous and one next neighborhood (bidirectional list). + A string is not requested to respect any syntactic rule: it's simply directly made of symbols. - + - + - - MassChangeRate - Mass increment per time. - MassChangeRate - https://www.wikidata.org/wiki/Q92020547 - 4-30.3 - Mass increment per time. + + ExposureRate + Time derivative of exposure. + ExposureRate + https://qudt.org/vocab/quantitykind/ExposureRate + https://www.wikidata.org/wiki/Q99720212 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-42 + 10-89 + Time derivative of exposure. - - - - - - - - - - - - - - SystemResource - Any physical or virtual component of limited availability within a computer system. - Resource - SystemResource - Any physical or virtual component of limited availability within a computer system. + + + + PrecipitationHardening + hardening of a workpiece caused by the precipitation of one or more compounds from a supersaturated solid solution + PrecipitationHardening + hardening of a workpiece caused by the precipitation of one or more compounds from a supersaturated solid solution - - - - - - - - - - - - - - - - - - - UpAntiQuark - UpAntiQuark + + + + HeatTreatment + Heat to a temperature appropriate for the particular material, maintain at that temperature and then cool at an appropriate rate to reduce hardness, improve machinability or achieve desired properties. + wärmebehandeln + HeatTreatment + Heat to a temperature appropriate for the particular material, maintain at that temperature and then cool at an appropriate rate to reduce hardness, improve machinability or achieve desired properties. - - - - - MeanFreePathOfElectrons - Average distance that electrons travel between two successive interactions. - MeanFreePathOfElectrons - https://qudt.org/vocab/quantitykind/ElectronMeanFreePath - https://www.wikidata.org/wiki/Q105672307 - 12-15.2 - Average distance that electrons travel between two successive interactions. + + + + + HardwareManufacturer + + HardwareManufacturer - - - - - ActivityOfSolute - RelativeActivityOfSolute - ActivityOfSolute - https://www.wikidata.org/wiki/Q89408862 - 9-24 + + + + CharacterisationHardwareSpecification + + CharacterisationHardwareSpecification - - - - Solubility - The analytical composition of a saturated solution, expressed in terms of the proportion of a designated solute in a designated solvent, is the solubility of that solute. - The solubility may be expressed as a concentration, molality, mole fraction, mole ratio, etc. - Solubility - https://www.wikidata.org/wiki/Q170731 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-01-15 - The analytical composition of a saturated solution, expressed in terms of the proportion of a designated solute in a designated solvent, is the solubility of that solute. - https://doi.org/10.1351/goldbook.S05740 + + + + HardwareModel + + HardwareModel - - - - GasLiquidSuspension - A coarse dispersion of liquid in a gas continuum phase. - GasLiquidSuspension - A coarse dispersion of liquid in a gas continuum phase. - Rain, spray. + + + + MagneticQuantumNumber + Atomic quantum number related to the z component lz, jz or sz, of the orbital, total, or spin angular momentum. + MagneticQuantumNumber + https://qudt.org/vocab/quantitykind/MagneticQuantumNumber + https://www.wikidata.org/wiki/Q2009727 + 10-13.4 + Atomic quantum number related to the z component lz, jz or sz, of the orbital, total, or spin angular momentum. - - - - Heteronuclear - A molecule composed of more than one element type. - Heteronuclear - A molecule composed of more than one element type. - Nitric oxide (NO) or carbon dioxide (CO₂). + + + + + QuantumNumber + Number describing a particular state of a quantum system. + QuantumNumber + https://qudt.org/vocab/quantitykind/QuantumNumber + https://www.wikidata.org/wiki/Q232431 + 10-13.1 + Number describing a particular state of a quantum system. - - - - - - - - - - - - - - CausalParticle - The class of entities that have no spatial structure. - The concept is based on the common usage of the word "particle", that is used to identify both a specific state of an elementary particle (a quantum) and both the chain of quantums that expresses the evolution of the particle in time. - The union of Elementary and Quantum classes. - CausalParticle - The concept is based on the common usage of the word "particle", that is used to identify both a specific state of an elementary particle (a quantum) and both the chain of quantums that expresses the evolution of the particle in time. - The union of Elementary and Quantum classes. - The class of entities that have no spatial structure. + + + + EmpiricalSimulationSoftware + A computational application that uses an empiric equation to predict the behaviour of a system without relying on the knowledge of the actual physical phenomena occurring in the object. + EmpiricalSimulationSoftware + A computational application that uses an empiric equation to predict the behaviour of a system without relying on the knowledge of the actual physical phenomena occurring in the object. - - - - - RelativeMassDefect - Quotient of mass defect and the unified atomic mass constant. - RelativeMassDefect - https://qudt.org/vocab/quantitykind/RelativeMassDefect - https://www.wikidata.org/wiki/Q98038718 - 10-22.2 - Quotient of mass defect and the unified atomic mass constant. + + + + Conductometry + Measurement principle in which the electric conductivity of a solution is measured. The conductivity of a solution depends on the concentration and nature of ions present. + Conductometry + https://www.wikidata.org/wiki/Q901180 + Measurement principle in which the electric conductivity of a solution is measured. The conductivity of a solution depends on the concentration and nature of ions present. + Monitoring of the purity of deionized water. + https://en.wikipedia.org/wiki/Conductometry + https://doi.org/10.1515/pac-2018-0109 - - - + + + - - - - - - + + + T+1 L0 M0 I0 Θ+1 N0 J0 + - Symbolic - A discrete data whose elements can be decoded as tokens from one or more alphabets, without necessarily respecting syntactic rules. - A symbolic entity is not necessarily graphical (e.g. it doesn't necessarily have the physical shape of a letter), but its elements can be decoded and put in relation with an alphabet. -In other words, a sequence of bit "1000010" in a RAM (a non-graphical entity) is a valid symbol since it can be decoded through ASCII rules as the letter "B". The same holds for an entity standing for the sound of a voice saying: "Hello", since it can be decomposed in discrete parts, each of them being associated to a letter of an alphabet. - Symbolic - A discrete data whose elements can be decoded as tokens from one or more alphabets, without necessarily respecting syntactic rules. - fe780 -emmo -!5*a -cat -for(i=0;i<N;++i) - A symbolic entity is not necessarily graphical (e.g. it doesn't necessarily have the physical shape of a letter), but its elements can be decoded and put in relation with an alphabet. -In other words, a sequence of bit "1000010" in a RAM (a non-graphical entity) is a valid symbol since it can be decoded through ASCII rules as the letter "B". The same holds for an entity standing for the sound of a voice saying: "Hello", since it can be decomposed in discrete parts, each of them being associated to a letter of an alphabet. - A symbolic object possesses a reductionistic oriented structure. -For example, text is made of words, spaces and punctuations. Words are made of characters (i.e. atomic symbols). + TemperatureTimeUnit + TemperatureTimeUnit - - - - Gluing - Process for joining two (base) materials by means of an adhesive polymer material - Kleben - Gluing + + + RedBottomAntiQuark + RedBottomAntiQuark - - - - - - - - - - - HallCoefficient - The relation between electric field strength and current density in an isotropic conductor. - HallCoefficient - https://qudt.org/vocab/quantitykind/HallCoefficient - https://www.wikidata.org/wiki/Q997439 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=521-09-02 - 12-19 - The relation between electric field strength and current density in an isotropic conductor. + + + + + MaterialSynthesis + Deals with undefined shapes both input and output. + The creation of a material entity starting from fundamental substances, involving chemical phenomena (e.g. reaction, bonding). + MaterialSynthesis + The creation of a material entity starting from fundamental substances, involving chemical phenomena (e.g. reaction, bonding). + Deals with undefined shapes both input and output. - - - - - - - - - - - MassieuFunction - Negative quotient of Helmholtz energy and temperature. - MassieuFunction - https://qudt.org/vocab/quantitykind/MassieuFunction - https://www.wikidata.org/wiki/Q3077625 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-26 - 5-22 - Negative quotient of Helmholtz energy and temperature. + + + + ProductionEngineering + ProductionEngineering - - - - SolidAngle - Ratio of area on a sphere to its radius squared. - SolidAngle - http://qudt.org/vocab/quantitykind/SolidAngle - 3-6 - Ratio of area on a sphere to its radius squared. - https://doi.org/10.1351/goldbook.S05732 + + + WPositiveBoson + WPositiveBoson - + - RedTopQuark - RedTopQuark + + + + + + + + + + + + + + + + + StrangeQuark + StrangeQuark + https://en.wikipedia.org/wiki/Strange_quark - + + + + + + + + + + + + + + Boson + A physical particle with integer spin that follows Bose–Einstein statistics. + Boson + A physical particle with integer spin that follows Bose–Einstein statistics. + https://en.wikipedia.org/wiki/Boson + + + - - SampleInspectionInstrument + + RamanSpectroscopy - SampleInspectionInstrument + Raman spectroscopy (/ˈrɑːmən/) (named after physicist C. V. Raman) is a spectroscopic technique typically used to determine vibrational modes of molecules, although rotational and other low-frequency modes of systems may also be observed. Raman spectroscopy is commonly used in chemistry to provide a structural fingerprint by which molecules can be identified. + +Raman spectroscopy relies upon inelastic scattering of photons, known as Raman scattering. A source of monochromatic light, usually from a laser in the visible, near infrared, or near ultraviolet range is used, although X-rays can also be used. The laser light interacts with molecular vibrations, phonons or other excitations in the system, resulting in the energy of the laser photons being shifted up or down. The shift in energy gives information about the vibrational modes in the system. Infrared spectroscopy typically yields similar yet complementary information. + +Typically, a sample is illuminated with a laser beam. Electromagnetic radiation from the illuminated spot is collected with a lens and sent through a monochromator. Elastic scattered radiation at the wavelength corresponding to the laser line (Rayleigh scattering) is filtered out by either a notch filter, edge pass filter, or a band pass filter, while the rest of the collected light is dispersed onto a detector. + RamanSpectroscopy + Raman spectroscopy (/ˈrɑːmən/) (named after physicist C. V. Raman) is a spectroscopic technique typically used to determine vibrational modes of molecules, although rotational and other low-frequency modes of systems may also be observed. Raman spectroscopy is commonly used in chemistry to provide a structural fingerprint by which molecules can be identified. + +Raman spectroscopy relies upon inelastic scattering of photons, known as Raman scattering. A source of monochromatic light, usually from a laser in the visible, near infrared, or near ultraviolet range is used, although X-rays can also be used. The laser light interacts with molecular vibrations, phonons or other excitations in the system, resulting in the energy of the laser photons being shifted up or down. The shift in energy gives information about the vibrational modes in the system. Infrared spectroscopy typically yields similar yet complementary information. + +Typically, a sample is illuminated with a laser beam. Electromagnetic radiation from the illuminated spot is collected with a lens and sent through a monochromator. Elastic scattered radiation at the wavelength corresponding to the laser line (Rayleigh scattering) is filtered out by either a notch filter, edge pass filter, or a band pass filter, while the rest of the collected light is dispersed onto a detector. - - - - - LevelWidth - In nuclear physics, quotient of the reduced Planck constant and the mean duration of life of an unstable particle or an excited state. - LevelWidth - https://qudt.org/vocab/quantitykind/LevelWidth - https://www.wikidata.org/wiki/Q98082340 - 10-26 - In nuclear physics, quotient of the reduced Planck constant and the mean duration of life of an unstable particle or an excited state. - https://doi.org/10.1351/goldbook.L03507 + + + + Spectroscopy + + Spectroscopy is a category of characterization techniques which use a range of principles to reveal the chemical composition, composition variation, crystal structure and photoelectric properties of materials. + Spectroscopy + Spectroscopy is a category of characterization techniques which use a range of principles to reveal the chemical composition, composition variation, crystal structure and photoelectric properties of materials. - + + + + + + + + + + + MathematicalModel + A mathematical model can be defined as a description of a system using mathematical concepts and language to facilitate proper explanation of a system or to study the effects of different components and to make predictions on patterns of behaviour. + +Abramowitz and Stegun, 1968 + An analogical icon expressed in mathematical language. + MathematicalModel + An analogical icon expressed in mathematical language. + + + - + + - - + + T0 L+1 M0 I0 Θ+1 N0 J0 - - - - NuclearQuadrupoleMoment - z component of the diagonalized tensor of nuclear quadrupole moment, in the quantum state with the nuclear spin in the field direction (z). - NuclearQuadrupoleMoment - https://qudt.org/vocab/quantitykind/NuclearQuadrupoleMoment - https://www.wikidata.org/wiki/Q97921226 - 10-18 - z component of the diagonalized tensor of nuclear quadrupole moment, in the quantum state with the nuclear spin in the field direction (z). + + LengthTemperatureUnit + LengthTemperatureUnit - - - ElectronicModel - A physics-based model based on a physics equation describing the behaviour of electrons. - ElectronicModel - A physics-based model based on a physics equation describing the behaviour of electrons. - Density functional theory. -Hartree-Fock. + + + + URN + The term "Uniform Resource Name" (URN) has been used historically to refer to both URIs under the "urn" scheme [RFC2141], which are required to remain globally unique and persistent even when the resource ceases to exist or becomes unavailable, and to any other URI with the properties of a name. + URN + The term "Uniform Resource Name" (URN) has been used historically to refer to both URIs under the "urn" scheme [RFC2141], which are required to remain globally unique and persistent even when the resource ceases to exist or becomes unavailable, and to any other URI with the properties of a name. + + + + + + LowPressureCasting + LowPressureCasting - - - - DigitalData - Discrete data that are decoded as a sequence of 1/0, or true/false, or on/off. - BinaryData - DigitalData - Discrete data that are decoded as a sequence of 1/0, or true/false, or on/off. + + + + Casting + Casting - + - - - MeanEnergyImparted - Expectation value of the energy imparted. - MeanEnergyImparted - https://qudt.org/vocab/quantitykind/MeanEnergyImparted - https://www.wikidata.org/wiki/Q99526969 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-12-44 - 10-80.2 - Expectation value of the energy imparted. + + + MassRatioOfWaterToDryMatter + The mass concentration of water at saturation is denoted usat. + Ratio of the mass of water to the mass of dry matter in a given volume of matter. + MassRatioOfWaterToDryMatter + https://www.wikidata.org/wiki/Q76378860 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-61 + 5-29 + Ratio of the mass of water to the mass of dry matter in a given volume of matter. - - - - LiquidPhaseSintering - ISO 3252:2019 Powder metallurgy -liquid-phase sintering: sintering of a powder or compact containing at least two constituents, under conditions such that a liquid phase is formed - LiquidPhaseSintering + + + + + + + + + + + + + + + + + MathematicalConstruct + MathematicalConstruct - - - - CriticalAndSupercriticalChromatography - - CriticalAndSupercriticalChromatography + + + + ComputerSystem + Electronic device capable of processing data, typically in binary form, according to instructions given to it in a variable program. + Computer + ComputerSystem + Electronic device capable of processing data, typically in binary form, according to instructions given to it in a variable program. + https://en.wikipedia.org/wiki/Computer - - - - Modeller - A estimator that uses modelling to declare a property of an object (i.e. infer a property from other properties). - Modeller - A estimator that uses modelling to declare a property of an object (i.e. infer a property from other properties). + + + + + + + + + + + + SemioticObject + Here is assumed that the concept of 'object' is always relative to a 'semiotic' process. An 'object' does not exists per se, but it's always part of an interpretation. + +The EMMO relies on strong reductionism, i.e. everything real is a formless collection of elementary particles: we give a meaning to real world entities only by giving them boundaries and defining them using 'sign'-s. + +In this way the 'sign'-ed entity becomes an 'object', and the 'object' is the basic entity needed in order to apply a logical formalism to the real world entities (i.e. we can speak of it through its sign, and use logics on it through its sign). + The object, in Peirce semiotics, as participant to a semiotic process. + Object + SemioticObject + The object, in Peirce semiotics, as participant to a semiotic process. - + - RightHandedParticle - RightHandedParticle + + + + + + + + + + + + + + + ThirdGenerationFermion + ThirdGenerationFermion - + - + - - DirectionAndEnergyDistributionOfCrossSection - Partial differential quotient of the cross section of a process with respect to the solid angle around a given direction and the energy of a particle scattered in that direction. - DirectionAndEnergyDistributionOfCrossSection - https://qudt.org/vocab/quantitykind/SpectralAngularCrossSection - https://www.wikidata.org/wiki/Q98269571 - 10-41 - Partial differential quotient of the cross section of a process with respect to the solid angle around a given direction and the energy of a particle scattered in that direction. + + UnifiedAtomicMassConstant + 1/12 of the mass of an atom of the nuclide 12C in the ground state at rest. + UnifiedAtomicMassConstant + https://www.wikidata.org/wiki/Q4817337 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-05-23 + 10-4.3 + 1/12 of the mass of an atom of the nuclide 12C in the ground state at rest. + https://doi.org/10.1351/goldbook.A00497 - - - - SampledDCPolarography - - DC polarography with current sampling at the end of each drop life mechanically enforced by a knocker at a preset drop time value. The current sampling and mechanical drop dislodge are synchronized. - In this way, the ratio of faradaic current to double layer charging current is enhanced and the negative influence of charging current is partially eliminated. Due to the improved signal (faradaic current) to noise (charging current) ratio, the limit of detection is lowered. - TASTPolarography - SampledDCPolarography - DC polarography with current sampling at the end of each drop life mechanically enforced by a knocker at a preset drop time value. The current sampling and mechanical drop dislodge are synchronized. - https://doi.org/10.1515/pac-2018-0109 + + + + + + + + + + + + + + + PhysicalConstant + Physical constants are categorised into "exact" and measured constants. + +With "exact" constants, we refer to physical constants that have an exact numerical value after the revision of the SI system that was enforsed May 2019. + PhysicalConstant + Physical constants are categorised into "exact" and measured constants. + +With "exact" constants, we refer to physical constants that have an exact numerical value after the revision of the SI system that was enforsed May 2019. + https://en.wikipedia.org/wiki/List_of_physical_constants - - - - DCPolarography - - If the whole scan is performed on a single growing drop, the technique should be called single drop scan voltammetry. The term polarography in this context is discouraged. - This is the oldest variant of polarographic techniques, introduced by Jaroslav Heyrovský (1890 – 1967). - Usually the drop time is between 1 and 5 s and the pseudo-steady-state wave-shaped dependence on potential is called a polarogram. If the limiting current is controlled by dif- fusion, it is expressed by the Ilkovich equation. - linear scan voltammetry with slow scan rate in which a dropping mercury electrode is used as the working electrode - DCPolarography - linear scan voltammetry with slow scan rate in which a dropping mercury electrode is used as the working electrode - https://doi.org/10.1515/pac-2018-0109 + + + + StyleSheetLanguage + A computer language that expresses the presentation of structured documents. + StyleSheetLanguage + A computer language that expresses the presentation of structured documents. + CSS + https://en.wikipedia.org/wiki/Style_sheet_language - - - - - - - 1 - - + + - - - 2 + + + + + + - Proton - A positive charged subatomic particle found in the atomic nucleus. - Proton - A positive charged subatomic particle found in the atomic nucleus. - https://en.wikipedia.org/wiki/Proton - - - - - BlueStrangeQuark - BlueStrangeQuark + Tile + A causal object that is direct part of a tessellation. + Tile + A causal object that is direct part of a tessellation. - - + + - - - - - - + + - - - - - - - - - MetrologicalSymbol - A symbol that stands for a concept in the language of the meterological domain of ISO 80000. - MetrologicalSymbol - A symbol that stands for a concept in the language of the meterological domain of ISO 80000. + + + MagneticDipoleMoment + For an atom or nucleus, this energy is quantized and can be written as: + + W = g μ M B + +where g is the appropriate g factor, μ is mostly the Bohr magneton or nuclear magneton, M is magnetic quantum number, and B is magnitude of the magnetic flux density. + +-- ISO 80000 + Vector quantity μ causing a change to its energy ΔW in an external magnetic field of field flux density B: + + ΔW = −μ · B + MagneticDipoleMoment + http://qudt.org/vocab/quantitykind/MagneticDipoleMoment + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-55 + 10-9.1 + 6-30 + Vector quantity μ causing a change to its energy ΔW in an external magnetic field of field flux density B: + + ΔW = −μ · B + http://goldbook.iupac.org/terms/view/M03688 - + - T0 L+1 M0 I0 Θ0 N0 J0 + T0 L0 M-1 I+1 Θ0 N0 J0 - LengthUnit - LengthUnit - - - - - - Command - A command must be interpretable by the computer system. - An instruction to a computer system to perform a given task. - Command - From a bash shell would e.g. `ls` be a command. Another example of a shell command would be `/path/to/executable arg1 arg2`. - A command must be interpretable by the computer system. - Commands are typically performed from a shell or a shell script, but not limited to them. + ElectricCurrentPerMassUnit + ElectricCurrentPerMassUnit - + - - - EffectiveMass - The mass that it seems to have when responding to forces, or the mass that it seems to have when interacting with other identical particles in a thermal distribution. - EffectiveMass - https://qudt.org/vocab/quantitykind/EffectiveMass - https://www.wikidata.org/wiki/Q1064434 - 12-30 - The mass that it seems to have when responding to forces, or the mass that it seems to have when interacting with other identical particles in a thermal distribution. + + Weight + Force of gravity acting on a body. + Weight + http://qudt.org/vocab/quantitykind/Weight + 4-9.2 + https://doi.org/10.1351/goldbook.W06668 - - + + - - + + + - - Plus - Plus + + + CatalyticActivity + Increase in the rate of reaction of a specified chemical reaction that an enzyme produces in a specific assay system. + CatalyticActivity + http://qudt.org/vocab/quantitykind/CatalyticActivity + Increase in the rate of reaction of a specified chemical reaction that an enzyme produces in a specific assay system. + https://doi.org/10.1351/goldbook.C00881 - - - - ElectrochemicalImpedanceSpectroscopy - - Impedimetric sensors are based on measurement of a concentration-dependent parameter taken from analysis of the respective electrochemical impedance spectra, or from the impedance magnitudes at a chosen fixed frequency. - The sinusoidal current response lags behind the sinusoidal voltage perturbation by a phase angle φ. Resistances (e.g. to charge transfer) give a response in phase with the voltage perturbation; capacitances (e.g. double layer) give a response 90° out of phase; combinations of resistances and capacitances give phase angles between 0 and 90°. Plots of the out of phase vs. the in phase component of the impedance for all the frequencies tested are called complex plane (or Nyquist) plots. Plots of the phase angle and the magnitude of the impedance vs. the logarithm of perturbation frequency are called Bode diagrams. Complex plane plots are the more commonly used for electrochemical sensors. - electrochemical measurement method of the complex impedance of an electrochemical system as a function of the frequency of a small amplitude (normally 5 to 10 mV) sinusoidal voltage perturbation superimposed on a fixed value of applied potential or on the open circuit potential - EIS - ElectrochemicalImpedanceSpectroscopy - https://www.wikidata.org/wiki/Q3492904 - electrochemical measurement method of the complex impedance of an electrochemical system as a function of the frequency of a small amplitude (normally 5 to 10 mV) sinusoidal voltage perturbation superimposed on a fixed value of applied potential or on the open circuit potential - https://doi.org/10.1515/pac-2018-0109 + + + + Python + Python - - - - Impedimetry - - measurement principle in which the complex electric impedance of a system is measured, usually as a function of a small amplitude sinusoidal electrode potential - Impedimetry - measurement principle in which the complex electric impedance of a system is measured, usually as a function of a small amplitude sinusoidal electrode potential - https://doi.org/10.1515/pac-2018-0109 + + + + ScriptingLanguage + A programming language that is executed through runtime interpretation. + ScriptingLanguage + A programming language that is executed through runtime interpretation. - - - - - - - - - - - - - - - - - - - - - Deduction - IndexSemiosis - Deduction + + + + + WaveVector + Vector k in the expression ω t−k⋅r+ϑ0 of the phase of a sinusoidal wave. + WaveVector + https://www.wikidata.org/wiki/Q657009 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-10-09 + 3-21 + Vector k in the expression ω t−k⋅r+ϑ0 of the phase of a sinusoidal wave. + https://en.wikipedia.org/wiki/Wave_vector - + - - - PhaseAngle - Angular measure between the positive real axis and the radius of the polar representation of the complex number in the complex plane. - PhaseAngle - https://www.wikidata.org/wiki/Q415829 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-07-04 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=141-01-01 - 3-7 - Angular measure between the positive real axis and the radius of the polar representation of the complex number in the complex plane. + + InternationalSystemOfQuantity + Quantities declared under the ISO 80000. + https://www.iso.org/obp/ui/#iso:std:iso:80000:-1:ed-1:v1:en:sec:3.1 + InternationalSystemOfQuantity + Quantities declared under the ISO 80000. + https://en.wikipedia.org/wiki/International_System_of_Quantities - + + + + StandardizedPhysicalQuantity + The superclass for all physical quantities classes that are categorized according to a standard (e.g. ISQ). + StandardizedPhysicalQuantity + The superclass for all physical quantities classes that are categorized according to a standard (e.g. ISQ). + + + + + + SpecificEnthalpy + Enthalpy per unit mass. + SpecificEnthalpy + https://qudt.org/vocab/quantitykind/SpecificEnthalpy + https://www.wikidata.org/wiki/Q21572993 + 5-21.3 + Enthalpy per unit mass. + https://en.wikipedia.org/wiki/Enthalpy#Specific_enthalpy + + + + + + PowderCoating + PowderCoating + + + + + CompositeMaterial + CompositeMaterial + + + + + + + + + T-1 L0 M-1 I0 Θ0 N0 J0 + + + PerTimeMassUnit + PerTimeMassUnit + + + - - PulsedElectroacousticMethod + + OpenCircuitHold - The pulsed electroacoustic (PEA) method is an established method for space charge measurements in polymeric dielectrics. - PulsedElectroacousticMethod - The pulsed electroacoustic (PEA) method is an established method for space charge measurements in polymeric dielectrics. - https://doi.org/10.1007/s10832-023-00332-y + a process in which the electric current is kept constant at 0 (i.e., open-circuit conditions) + OCVHold + OpenCircuitHold + a process in which the electric current is kept constant at 0 (i.e., open-circuit conditions) - + + + RedDownAntiQuark + RedDownAntiQuark + + + - - ChargeDistribution + ResourceIdentifier - ChargeDistribution + ResourceIdentifier + + + + + + + + + + + + + Fugacity + Measure of the tendency of a substance to leave a phase. + Fugacity + https://qudt.org/vocab/quantitykind/Fugacity + https://www.wikidata.org/wiki/Q898412 + 9-20 + Measure of the tendency of a substance to leave a phase. + https://doi.org/10.1351/goldbook.F02543 - + + + + Command + A command must be interpretable by the computer system. + An instruction to a computer system to perform a given task. + Command + From a bash shell would e.g. `ls` be a command. Another example of a shell command would be `/path/to/executable arg1 arg2`. + A command must be interpretable by the computer system. + Commands are typically performed from a shell or a shell script, but not limited to them. + + + - + - - + + + + + + + - Lepton - An elementary particle of half-integer spin (spin 1⁄2) that does not undergo strong interactions. - Lepton - An elementary particle of half-integer spin (spin 1⁄2) that does not undergo strong interactions. - https://en.wikipedia.org/wiki/Lepton + FundamentalBoson + A boson that is a single elementary particle. + A particle with integer spin that follows Bose–Einstein statistics. + FundamentalBoson + A particle with integer spin that follows Bose–Einstein statistics. + A boson that is a single elementary particle. + https://en.wikipedia.org/wiki/Boson#Elementary_bosons - + - - - LatentHeatOfPhaseTransition - Energy to be added to or removed from a system under constant temperature and pressure to undergo a complete phase transition. - LatentHeatOfPhaseTransition - https://www.wikidata.org/wiki/Q106553458 - 9-16 - Energy to be added to or removed from a system under constant temperature and pressure to undergo a complete phase transition. + + AcousticQuantity + Quantities categorised according to ISO 80000-8. + AcousticQuantity + Quantities categorised according to ISO 80000-8. - + + + + SystemUnit + SystemUnit + + + - - - LatentHeat - LatentHeat - https://www.wikidata.org/wiki/Q207721 - 5-6.2 + + + ParticlePositionVector + Position vector of a particle. + ParticlePositionVector + https://qudt.org/vocab/quantitykind/ParticlePositionVector + https://www.wikidata.org/wiki/Q105533324 + 12-7.1 + Position vector of a particle. - - - - OpticalMicroscopy - - Optical microscopy is a technique used to closely view a sample through the magnification of a lens with visible light - OpticalMicroscopy - Optical microscopy is a technique used to closely view a sample through the magnification of a lens with visible light + + + + + + + T0 L-3 M+1 I0 Θ0 N0 J0 + + + DensityUnit + DensityUnit - - - - ChipboardManufacturing - ChipboardManufacturing + + + + + + + T-3 L+2 M+1 I-1 Θ0 N0 J0 + + + ElectricPotentialUnit + ElectricPotentialUnit - + - - - ChargeNumber - For a particle, electric charge q divided by elementary charge e. - The charge number of a particle may be presented as a superscript to the symbol of that particle, e.g. H+, He++, Al3+, Cl−, S=, N3−. - The charge number of an electrically charged particle can be positive or negative. The charge number of an electrically neutral particle is zero. - IonizationNumber - ChargeNumber - https://qudt.org/vocab/quantitykind/ChargeNumber - https://www.wikidata.org/wiki/Q1800063 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-05-17 - https://dbpedia.org/page/Charge_number - 10-5.2 - For a particle, electric charge q divided by elementary charge e. - https://en.wikipedia.org/wiki/Charge_number - https://doi.org/10.1351/goldbook.C00993 + + + + + + + + + NuclearQuadrupoleMoment + z component of the diagonalized tensor of nuclear quadrupole moment, in the quantum state with the nuclear spin in the field direction (z). + NuclearQuadrupoleMoment + https://qudt.org/vocab/quantitykind/NuclearQuadrupoleMoment + https://www.wikidata.org/wiki/Q97921226 + 10-18 + z component of the diagonalized tensor of nuclear quadrupole moment, in the quantum state with the nuclear spin in the field direction (z). - + + + + + DragCoefficient + Dimensionless parameter to quantify fluid resistance. + DragFactor + DragCoefficient + https://qudt.org/vocab/quantitykind/DragCoefficient + https://www.wikidata.org/wiki/Q1778961 + 4-23.4 + Dimensionless parameter to quantify fluid resistance. + + + - - DynamicMechanicalSpectroscopy + + Hazard - Dynamic Mechanical Analysis (DMA) is a material characterization technique where a small deformation is applied to a sample in a cyclic manner. This allows measurement of the materials response to stress, temperature, frequency or time. The term is also used to refer to the analyzer that performs the test. - DMA - DynamicMechanicalSpectroscopy - Dynamic Mechanical Analysis (DMA) is a material characterization technique where a small deformation is applied to a sample in a cyclic manner. This allows measurement of the materials response to stress, temperature, frequency or time. The term is also used to refer to the analyzer that performs the test. + Set of inherent properties of a substance, mixture of substances, or a process involving substances that, under production, usage, or disposal conditions, make it capable of causing adverse effects to organisms or the environment, depending on the degree of exposure; in other words, it is a source of danger. + Hazard + Set of inherent properties of a substance, mixture of substances, or a process involving substances that, under production, usage, or disposal conditions, make it capable of causing adverse effects to organisms or the environment, depending on the degree of exposure; in other words, it is a source of danger. - - - - - - - - - - - GasSolution - A gaseous solution made of more than one component type. - GasMixture - GasSolution - A gaseous solution made of more than one component type. + + + + + CharacterisationProperty + The characterisation property is the investigate property or behaviour of a sample. It is derived from the secondary data, usually after classification or quantification (manually or by a model). + CharacterisationProperty + The characterisation property is the investigate property or behaviour of a sample. It is derived from the secondary data, usually after classification or quantification (manually or by a model). - - - - Determined - Determined + + + + MeasuredProperty + A quantity that is the result of a well-defined measurement procedure. + The specification of a measurand requires knowledge of the kind of quantity, description of the state of the phenomenon, body, or substance carrying the quantity, including any relevant component, and the chemical entities involved. + +-- VIM + MeasuredProperty + A quantity that is the result of a well-defined measurement procedure. - - - - - - - - - - - - - - - - - - - DownAntiQuark - DownAntiQuark + + + + SecondaryData + + Data resulting from the application of post-processing or model generation to other data. + Elaborated data + SecondaryData + Data resulting from the application of post-processing or model generation to other data. + Deconvoluted curves + Intensity maps - + - + + + + + + + + + + + - - MagneticReluctance - Magnetic tension divided by magnetic flux. - Reluctance - MagneticReluctance - https://qudt.org/vocab/quantitykind/Reluctance - https://www.wikidata.org/wiki/Q863390 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-28 - 6-39 - Magnetic tension divided by magnetic flux. + + Density + Quantity representing the spatial distribution of mass in a continuous material. + MassConcentration + MassDensity + Density + http://qudt.org/vocab/quantitykind/Density + 4-2 + 9-10 + Mass per volume. + https://doi.org/10.1351/goldbook.D01590 - - - - FormingJoin - FormingJoin + + + + Polynomial + Polynomial + 2 * x^2 + x + 3 - - - - JoinManufacturing - The permanent joining or other bringing together of two or more workpieces of a geometric shape or of similar workpieces with shapeless material. In each case, the cohesion is created locally and increased as a whole. - A manufacturing involving the creation of long-term connection of several workpieces. - DIN 8580:2020 - Fügen - JoinManufacturing - A manufacturing involving the creation of long-term connection of several workpieces. + + + + AlgebricExpression + An expression that has parts only integer constants, variables, and the algebraic operations (addition, subtraction, multiplication, division and exponentiation by an exponent that is a rational number) + AlgebricExpression + 2x+3 - - + + - T0 L+2 M-1 I0 Θ0 N0 J0 + T0 L-1 M0 I0 Θ0 N0 J0 - AreaPerMassUnit - AreaPerMassUnit - - - - - - PowderCoating - PowderCoating + ReciprocalLengthUnit + ReciprocalLengthUnit - - - - - - - - + + - - + + + + + + ThomsonCoefficient + quotient of Thomson heat power developed, and the electric current and temperature difference + ThomsonCoefficient + https://qudt.org/vocab/quantitykind/ThomsonCoefficient + https://www.wikidata.org/wiki/Q105801233 + 12-23 + quotient of Thomson heat power developed, and the electric current and temperature difference + + + + - - + + + + + JouleThomsonCoefficient + JouleThomsonCoefficient + https://www.wikidata.org/wiki/Q93946998 + 5-24 + + + + + + Java + Java + + + + + + CompiledLanguage + CompiledLanguage + + + + + + + ProtonMass + The rest mass of a proton. + ProtonMass + http://qudt.org/vocab/constant/ProtonMass + https://doi.org/10.1351/goldbook.P04914 + + + + + + PathLength + Length of a rectifiable curve between two of its points. + ArcLength + PathLength + https://www.wikidata.org/wiki/Q7144654 + https://dbpedia.org/page/Arc_length + 3-1.7 + Length of a rectifiable curve between two of its points. + https://en.wikipedia.org/wiki/Arc_length + + + + + + + + CubicExpansionCoefficient + Quantity characterizing the variation with thermodynamic temperature T of the volume V of a body, under given conditions. + alpha_V = (1/V) * (dV/dT) + CubicExpansionCoefficient + https://qudt.org/vocab/quantitykind/CubicExpansionCoefficient + https://www.wikidata.org/wiki/Q74761076 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-28 + 5-3.2 + Quantity characterizing the variation with thermodynamic temperature T of the volume V of a body, under given conditions. + + + + - - + + + + CoefficientOfThermalExpansion + Material property which describes how the size of an object changes with a change in temperature. + ThermalExpansionCoefficient + CoefficientOfThermalExpansion + https://www.wikidata.org/wiki/Q45760 + Material property which describes how the size of an object changes with a change in temperature. + + + + + + + LinearExpansionCoefficient + Relative change of length per change of temperature. + LinearExpansionCoefficient + https://qudt.org/vocab/quantitykind/LinearExpansionCoefficient + https://www.wikidata.org/wiki/Q74760821 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-27 + 5-3.1 + Relative change of length per change of temperature. + + + + - - + + - - - CharacterisationMeasurementProcess - - Process of experimentally obtaining one or more values that can reasonably be attributed to a quantity together with any other available relevant information -NOTE 1 The quantity mentioned in the definition is an individual quantity. -NOTE 2 The relevant information mentioned in the definition may be about the values obtained by the measurement, -such that some may be more representative of the measurand than others. -NOTE 3 Measurement is sometimes considered to apply to nominal properties, but not in this Vocabulary, where the -process of obtaining values of nominal properties is called “examination”. -NOTE 4 Measurement requires both experimental comparison of quantities or experimental counting of entities at -some step of the process and the use of models and calculations that are based on conceptual considerations. -NOTE 5 The conditions of reasonable attribution mentioned in the definition take into account a description of the -quantity commensurate with the intended use of a measurement result, a measurement procedure, and a calibrated -measuring system operating according to the specified measurement procedure, including the measurement -conditions. Moreover, a maximum permissible error and/or a target uncertainty may be specified, and the -measurement procedure and the measuring system should then be chosen in order not to exceed these measuring -system specifications. + + IterativeWorkflow + A workflow whose steps (iterative steps) are the repetition of the same workflow type. + IterativeWorkflow + A workflow whose steps (iterative steps) are the repetition of the same workflow type. + --- International Vocabulary of Metrology(VIM) - The measurement process associates raw data to the sample through a probe and a detector. - CharacterisationMeasurementProcess - Process of experimentally obtaining one or more values that can reasonably be attributed to a quantity together with any other available relevant information -NOTE 1 The quantity mentioned in the definition is an individual quantity. -NOTE 2 The relevant information mentioned in the definition may be about the values obtained by the measurement, -such that some may be more representative of the measurand than others. -NOTE 3 Measurement is sometimes considered to apply to nominal properties, but not in this Vocabulary, where the -process of obtaining values of nominal properties is called “examination”. -NOTE 4 Measurement requires both experimental comparison of quantities or experimental counting of entities at -some step of the process and the use of models and calculations that are based on conceptual considerations. -NOTE 5 The conditions of reasonable attribution mentioned in the definition take into account a description of the -quantity commensurate with the intended use of a measurement result, a measurement procedure, and a calibrated -measuring system operating according to the specified measurement procedure, including the measurement -conditions. Moreover, a maximum permissible error and/or a target uncertainty may be specified, and the -measurement procedure and the measuring system should then be chosen in order not to exceed these measuring -system specifications. + + + + + SerialWorkflow + A workflow whose tasks are tiles of a sequence. + SerialWorkflow + A workflow whose tasks are tiles of a sequence. + + + + + + ScanningAugerElectronMicroscopy + + Auger electron spectroscopy (AES or simply Auger) is a surface analysis technique that uses an electron beam to excite electrons on atoms in the particle. Atoms that are excited by the electron beam can emit “Auger” electrons. AES measures the kinetic energies of the emitted electrons. The energy of the emitted electrons is characteristic of elements present at the surface and near the surface of a sample. + AES + ScanningAugerElectronMicroscopy + Auger electron spectroscopy (AES or simply Auger) is a surface analysis technique that uses an electron beam to excite electrons on atoms in the particle. Atoms that are excited by the electron beam can emit “Auger” electrons. AES measures the kinetic energies of the emitted electrons. The energy of the emitted electrons is characteristic of elements present at the surface and near the surface of a sample. + --- International Vocabulary of Metrology(VIM) - The measurement process associates raw data to the sample through a probe and a detector. - Measurement + + + CompositePhysicalObject + The class of physical objects possessing a structure that is larger than a single composite particle, for which its bosonic or fermionic nature is undetermined. + CompositePhysicalObject + The class of physical objects possessing a structure that is larger than a single composite particle, for which its bosonic or fermionic nature is undetermined. - - + + - - + + - - + + - - - CharacterisationMeasurementInstrument - - Device used for making measurements, alone or in conjunction with one or more supplementary -devices -NOTE 1 A measuring instrument that can be used alone for making measurements is a measuring system. -NOTE 2 A measuring instrument is either an indicating measuring instrument or a material measure. - The instrument used for characterising a material, which usually has a probe and a detector as parts. - CharacterisationMeasurementInstrument - Device used for making measurements, alone or in conjunction with one or more supplementary -devices -NOTE 1 A measuring instrument that can be used alone for making measurements is a measuring system. -NOTE 2 A measuring instrument is either an indicating measuring instrument or a material measure. - The instrument used for characterising a material, which usually has a probe and a detector as parts. - In nanoindentation is the nanoindenter - Measuring instrument - - - - - - + + - - - Coercivity - Coercive field strength in a substance when either the magnetic flux density or the magnetic polarization and magnetization is brought from its value at magnetic saturation to zero by monotonic reduction of the applied magnetic field strength. - Coercivity - https://qudt.org/vocab/quantitykind/Coercivity - https://www.wikidata.org/wiki/Q432635 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-12-69 - 6-31 - Coercive field strength in a substance when either the magnetic flux density or the magnetic polarization and magnetization is brought from its value at magnetic saturation to zero by monotonic reduction of the applied magnetic field strength. + + DataProcessing + A computation that provides a data output following the elaboration of some input data, using a data processing application. + DataProcessing + A computation that provides a data output following the elaboration of some input data, using a data processing application. - - - - - SpeedOfLightInVacuum - The speed of light in vacuum. Defines the base unit metre in the SI system. - SpeedOfLightInVacuum - http://qudt.org/vocab/constant/SpeedOfLight_Vacuum - 6-35.2 - The speed of light in vacuum. Defines the base unit metre in the SI system. - https://doi.org/10.1351/goldbook.S05854 + + + + + LiquidSolution + A liquid solution made of two or more component substances. + LiquidSolution + A liquid solution made of two or more component substances. - - - - - - - T0 L-2 M0 I+1 Θ0 N0 J0 - - - ElectricCurrentDensityUnit - ElectricCurrentDensityUnit + + + + Solution + A solution is a homogeneous mixture composed of two or more substances. + Solutions are characterized by the occurrence of Rayleigh scattering on light, + Solution + A solution is a homogeneous mixture composed of two or more substances. - - - - ElectrochemicalPiezoelectricMicrogravimetry - - Electrogravimetry using an electrochemical quartz crystal microbalance. - The change of mass is, for rigid deposits, linearly proportional to the change of the reso- nance frequency of the quartz crystal, according to the Sauerbrey equation. For non- rigid deposits, corrections must be made. - ElectrochemicalPiezoelectricMicrogravimetry - Electrogravimetry using an electrochemical quartz crystal microbalance. - https://doi.org/10.1515/pac-2018-0109 + + + + ShearForming + Forming of a solid body, whereby the plastic state is essentially brought about by shear stress. + Schubumformen + ShearForming - - - - VaporPressureDepressionOsmometry - - Vapor pressure osmometry measures vapor pressure indirectly by measuring the change in temperature of a polymer solution on dilution by solvent vapor and is generally useful for polymers with Mn below 10,000–40,000 g/mol. When molecular weight is more than that limit, the quantity being measured becomes very small to detect. - VPO - VaporPressureDepressionOsmometry - Vapor pressure osmometry measures vapor pressure indirectly by measuring the change in temperature of a polymer solution on dilution by solvent vapor and is generally useful for polymers with Mn below 10,000–40,000 g/mol. When molecular weight is more than that limit, the quantity being measured becomes very small to detect. + + + + + + + + + + SymbolicConstruct + A symbolic entity made of other symbolic entities according to a specific spatial configuration. + This class collects individuals that represents arrangements of strings, or other symbolic compositions, without any particular predifined arrangement schema. + SymbolicConstruct + A symbolic entity made of other symbolic entities according to a specific spatial configuration. + This class collects individuals that represents arrangements of strings, or other symbolic compositions, without any particular predifined arrangement schema. - + - - EffectiveDiffusionCoefficient - Diffusion coefficient through the pore space of a porous media. - EffectiveDiffusionCoefficient - https://www.wikidata.org/wiki/Q258852 - Diffusion coefficient through the pore space of a porous media. + + + TotalAngularMomentum + Vector quantity in a quantum system composed of the vectorial sum of angular momentum L and spin s. + TotalAngularMomentum + https://qudt.org/vocab/quantitykind/TotalAngularMomentum + https://www.wikidata.org/wiki/Q97496506 + 10-11 + Vector quantity in a quantum system composed of the vectorial sum of angular momentum L and spin s. - + - + - - DiffusionCoefficient - Proportionality constant in some physical laws. - DiffusionCoefficient - Proportionality constant in some physical laws. + + AngularMomentum + Measure of the extent and direction an object rotates about a reference point. + AngularMomentum + http://qudt.org/vocab/quantitykind/AngularMomentum + 4-11 + https://doi.org/10.1351/goldbook.A00353 - - - - - - - - - - - - - - - StandardModelParticle - Disjointness comes from the fact that standard model elementary particles are entities that possess objectively distinct and singular characters. - The union of all classes categorising elementary particles according to the Standard Model. - ElementaryParticle - StandardModelParticle - The union of all classes categorising elementary particles according to the Standard Model. - Disjointness comes from the fact that standard model elementary particles are entities that possess objectively distinct and singular characters. - Graviton is included, even if it is an hypothetical particle, to enable causality for gravitational interactions. - This class represents only real particles that are the input and output of a Feynman diagram, and hence respect the E²-p²c²=m²c⁴ energy-momentum equality (on the mass shell). -In the EMMO the virtual particles (off the mass shell), the internal propagators of the interaction within a Feynman diagram, are not represented as mereological entities but as object relations (binary predicates). + + + + + InjectionMolding + InjectionMolding - + + + + ArchetypeJoin + Archetype join attaches two workpiece with geometrically defined shape together, using supplementary workpiece made of amorphous material (e.g. powder). + ArchetypeJoin + Archetype join attaches two workpiece with geometrically defined shape together, using supplementary workpiece made of amorphous material (e.g. powder). + + + - - - DragForce - Retarding force on a body moving in a fluid. - DragForce - https://www.wikidata.org/wiki/Q206621 - 4-9.6 - Retarding force on a body moving in a fluid. + + + ActiveEnergy + The integral over a time interval of the instantaneous power. + ActiveEnergy + https://qudt.org/vocab/quantitykind/ActiveEnergy + https://www.wikidata.org/wiki/Q79813678 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=601-01-19 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-11-57 + 6-62 + The integral over a time interval of the instantaneous power. - + - - - DiffusionLength - In condensed matter physics, the square root of the product of diffusion coefficient and lifetime. - DiffusionLength - https://qudt.org/vocab/quantitykind/SolidStateDiffusionLength - https://www.wikidata.org/wiki/Q106097176 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=521-02-60 - 12-33 - In condensed matter physics, the square root of the product of diffusion coefficient and lifetime. + + + PhaseSpeedOfElectromagneticWaves + Angular frequency divided by angular wavenumber. + PhaseSpeedOfElectromagneticWaves + https://qudt.org/vocab/quantitykind/ElectromagneticWavePhaseSpeed + https://www.wikidata.org/wiki/Q77990619 + 6-35.1 + Angular frequency divided by angular wavenumber. @@ -13142,2090 +12203,2288 @@ In the EMMO the virtual particles (off the mass shell), the internal propagators AntiLepton - - - - - - - - - - - - Fundamental - A whole that represent the overall lifetime of the world object that represents according to some holistic criteria. - Lifetime - Maximal - Fundamental - A whole that represent the overall lifetime of the world object that represents according to some holistic criteria. - A marathon is an example of class whose individuals are always maximal since the criteria satisfied by a marathon 4D entity poses some constraints on its temporal and spatial extent. + + + + + + + + + + MagneticMoment + A vector quantity equal to the product of the current, the loop area, and the unit vector normal to the loop plane, the direction of which corresponds to the loop orientation + MagneticAreaMoment + MagneticMoment + https://qudt.org/vocab/quantitykind/MagneticMoment + https://www.wikidata.org/wiki/Q242657 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-49 + 6-23 + A vector quantity equal to the product of the current, the loop area, and the unit vector normal to the loop plane, the direction of which corresponds to the loop orientation + https://doi.org/10.1351/goldbook.M03688 + -On the contrary, the class for a generic running process does not necessarily impose maximality to its individuals. A running individual is maximal only when it extends in time for the minimum amount required to identify a running act, so every possible temporal part is always a non-running. + + + + XrayDiffraction + + a technique used to analyze the atomic and molecular structure of crystalline materials by observing the diffraction patterns produced when X-rays interact with the regular array of atoms in the crystal lattice + XRD + XrayDiffraction + https://www.wikidata.org/wiki/Q12101244 + a technique used to analyze the atomic and molecular structure of crystalline materials by observing the diffraction patterns produced when X-rays interact with the regular array of atoms in the crystal lattice + https://en.wikipedia.org/wiki/X-ray_crystallography + -Following the two examples, a marathon individual is a maximal that can be decomposed into running intervals. The marathon class is a subclass of running. + + + + ScatteringAndDiffraction + + ScatteringAndDiffraction - + + + + FiberboardManufacturing + FiberboardManufacturing + + + + + + FormingFromChip + FormingFromChip + + + + + + + + - + + + + Minus + Minus + + + + + + ArithmeticOperator + ArithmeticOperator + + + - - TotalAngularMomentumQuantumNumber - Quantum number in an atom describing the magnitude of total angular momentum J. - TotalAngularMomentumQuantumNumber - https://qudt.org/vocab/quantitykind/TotalAngularMomentumQuantumNumber - https://www.wikidata.org/wiki/Q1141095 - 10-13.6 - Quantum number in an atom describing the magnitude of total angular momentum J. + + + RelaxationTime + time constant for scattering, trapping or annihilation of charge carriers, phonons or other quasiparticles + RelaxationTime + https://www.wikidata.org/wiki/Q106041085 + 12-32.1 + time constant for scattering, trapping or annihilation of charge carriers, phonons or other quasiparticles - + - - - Attenuation - Decrease in magnitude of any kind of flux through a medium. - Extinction - Attenuation - 3-26.1 - Decrease in magnitude of any kind of flux through a medium. - https://en.wikipedia.org/wiki/Attenuation - https://doi.org/10.1351/goldbook.A00515 + + TimeConstant + parameter characterizing the response to a step input of a first‑order, linear time‑invariant system + TimeConstant + https://www.wikidata.org/wiki/Q1335249 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-05-26 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=351-45-32 + 3-15 + parameter characterizing the response to a step input of a first‑order, linear time‑invariant system - + - + - - ThermalInsulance - Reciprocal of the coefficient of heat transfer. - CoefficientOfThermalInsulance - ThermalInsulance - https://qudt.org/vocab/quantitykind/ThermalInsulance - https://www.wikidata.org/wiki/Q2596212 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-41 - 5-11 - Reciprocal of the coefficient of heat transfer. + + KermaRate + Time derivative of kerma. + KermaRate + https://qudt.org/vocab/quantitykind/KermaRate + https://www.wikidata.org/wiki/Q99713105 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-12-28 + 10-86.2 + Time derivative of kerma. - + + + + + AngularWaveNumber + In condensed matter physics, quotient of momentum and the reduced Planck constant. + AngularRepetency + AngularWaveNumber + https://qudt.org/vocab/quantitykind/AngularWavenumber + https://www.wikidata.org/wiki/Q105542089 + 12-9.1 + In condensed matter physics, quotient of momentum and the reduced Planck constant. + + + + + + + LinearAttenuationCoefficient + In nuclear physics, fraction of interacting particles per distance traversed in a given material. + LinearAttenuationCoefficient + https://www.wikidata.org/wiki/Q98583077 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-04-31 + 10-49 + In nuclear physics, fraction of interacting particles per distance traversed in a given material. + + + + + ZBoson + An uncharged vector boson that mediate the weak interaction. + Z bosons are their own antiparticles. + NeutralWeakBoson + ZBoson + An uncharged vector boson that mediate the weak interaction. + Z bosons are their own antiparticles. + https://en.wikipedia.org/wiki/W_and_Z_bosons + + + - - TransmissionElectronMicroscopy + + Probe - Transmission electron microscopy (TEM) is a microscopy technique in which a beam of electrons is transmitted through a specimen to form an image. The specimen is most often an ultrathin section less than 100 nm thick or a suspension on a grid. An image is formed from the interaction of the electrons with the sample as the beam is transmitted through the specimen. The image is then magnified and focused onto an imaging device, such as a fluorescent screen, a layer of photographic film, or a sensor such as a scintillator attached to a charge-coupled device. - TEM - TransmissionElectronMicroscopy - Transmission electron microscopy (TEM) is a microscopy technique in which a beam of electrons is transmitted through a specimen to form an image. The specimen is most often an ultrathin section less than 100 nm thick or a suspension on a grid. An image is formed from the interaction of the electrons with the sample as the beam is transmitted through the specimen. The image is then magnified and focused onto an imaging device, such as a fluorescent screen, a layer of photographic film, or a sensor such as a scintillator attached to a charge-coupled device. + Probe is the physical tool (i.e., a disturbance, primary solicitation, or a gadget), controlled over time, that generates measurable fields that interact with the sample to acquire information on the specimen’s behaviour and properties. + Probe + Probe is the physical tool (i.e., a disturbance, primary solicitation, or a gadget), controlled over time, that generates measurable fields that interact with the sample to acquire information on the specimen’s behaviour and properties. + In dynamic light scattering, temporal fluctuations of backscattered light due to Brownian motion and flow of nanoparticles are the probe, resolved as function of pathlength in the sample. From fluctuation analysis (intensity correlations) and the wavelength of light in the medium, the (distribution of) diffusion coefficient(s) can be measured during flow. The Stokes-Einstein relation yields the particle size characteristics. + In electron microscopy (SEM or TEM), the probe is a beam of electrons with known energy that is focused (and scanned) on the sample’s surface with a well-defined beam-size and scanning algorithm. + In mechanical testing, the probe is a the tip plus a force actuator, which is designed to apply a force over-time on a sample. Many variants can be defined depending on way the force is applied (tensile/compressive uniaxial tests, bending test, indentation test) and its variation with time (static tests, dynamic/cyclic tests, impact tests, etc…) + In spectroscopic methods, the probe is a beam of light with pre-defined energy (for example in the case of laser beam for Raman measurements) or pre-defined polarization (for example in the case of light beam for Spectroscopic Ellipsometry methods), that will be properly focused on the sample’s surface with a welldefined geometry (specific angle of incidence). + In x-ray diffraction, the probe is a beam of x-rays with known energy that is properly focused on the sample’s surface with a well-defined geometry - + + + + DataProcessingApplication + DataProcessingApplication + + + + + + ApplicationProgram + A program aimed to provide a specific high level function to the user, usually hiding lower level procedures. + App + Application + ApplicationProgram + A program aimed to provide a specific high level function to the user, usually hiding lower level procedures. + Word processors, graphic image processing programs, database management systems, numerical simulation software and games. + + + - - IonActivity - Normally a standard solution is a solution of the ion at a molality of 1 mol/kg (exactly). Standardized conditions are normally 1013,25 hPa and 25 °C. - The correction factor is called activity coefficient and it is determined experimentally. See ActivityCoefficient - ratio of the product of ion molality b and a correction factor γ to the molality b° of the same ion in a standard solution under standardized conditions: a = bγ / b°. - IonActivity - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-01-20 - ratio of the product of ion molality b and a correction factor γ to the molality b° of the same ion in a standard solution under standardized conditions: a = bγ / b°. + + + + + + + + + MassExcess + Difference between the mass of an atom, and the product of its mass number and the unified mass constant. + MassExcess + https://qudt.org/vocab/quantitykind/MassExcess + https://www.wikidata.org/wiki/Q1571163 + 10-21.1 + Difference between the mass of an atom, and the product of its mass number and the unified mass constant. + https://doi.org/10.1351/goldbook.M03719 - - + + - T0 L+2 M0 I0 Θ-1 N0 J0 + T0 L0 M-2 I0 Θ0 N0 J0 - AreaPerTemperatureUnit - AreaPerTemperatureUnit - - - - - - LinkedFlux - Magnetic flux the integration area of which is such that magnetic field lines cross it in the same orientation more than once. - LinkedFlux - https://qudt.org/vocab/quantitykind/MagneticFlux - https://www.wikidata.org/wiki/Q4374882 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-77 - 6-22.2 - Magnetic flux the integration area of which is such that magnetic field lines cross it in the same orientation more than once. + InverseSquareMassUnit + InverseSquareMassUnit - + - - LogarithmicDecrement - Product of damping coefficient and period duration. - LogarithmicDecrement - https://www.wikidata.org/wiki/Q1399446 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-05-25 - 3-25 - Product of damping coefficient and period duration. - - - - - - - MaximumBetaParticleEnergy - Maximum kinetic energy of the emitted beta particle produced in the nuclear disintegration process. - MaximumBetaParticleEnergy - https://qudt.org/vocab/quantitykind/MaximumBeta-ParticleEnergy - https://www.wikidata.org/wiki/Q98148038 - 10-33 - Maximum kinetic energy of the emitted beta particle produced in the nuclear disintegration process. + + LeakageFactor + One minus the square of the coupling factor + LeakageFactor + https://www.wikidata.org/wiki/Q78102042 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-42 + 6-42.2 + One minus the square of the coupling factor - - - - Magnetizing - Magnetizing + + + QuantumData + Data that are expressed through quantum mechanical principles, and that can have several values ​​/ be in several states in the same place at the same time (quantum superposition), each of them with a certain probability. + QuantumData + Data that are expressed through quantum mechanical principles, and that can have several values ​​/ be in several states in the same place at the same time (quantum superposition), each of them with a certain probability. - + - - + - - T-4 L+3 M+1 I-2 Θ0 N0 J0 + + - - InversePermittivityUnit - InversePermittivityUnit - - - - - WPositiveBoson - WPositiveBoson + + + + SurfaceMassDensity + at a given point on a two-dimensional domain of quasi-infinitesimal area dA, scalar quantity equal to the mass dm within the domain divided by the area dA, thus ρA = dm/dA. + AreicMass + SurfaceDensity + SurfaceMassDensity + https://www.wikidata.org/wiki/Q1907514 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-10 + 4-5 + at a given point on a two-dimensional domain of quasi-infinitesimal area dA, scalar quantity equal to the mass dm within the domain divided by the area dA, thus ρA = dm/dA. + https://doi.org/10.1351/goldbook.S06167 - - - - ReactionSintering - ISO 3252:2019 Powder metallurgy -reaction sintering: process wherein at least two constituents of a powder mixture react during sintering - ReactionSintering + + + + + ActivityOfSolute + RelativeActivityOfSolute + ActivityOfSolute + https://www.wikidata.org/wiki/Q89408862 + 9-24 - + - - Conductometry + + LevelOfExpertise - The conductivity of a solution depends on the concentration and nature of ions present. - measurement principle in which the electric conductivity of a solution is measured - Conductometry - https://www.wikidata.org/wiki/Q901180 - measurement principle in which the electric conductivity of a solution is measured - Monitoring of the purity of deionized water. - https://en.wikipedia.org/wiki/Conductometry - https://doi.org/10.1515/pac-2018-0109 + Describes the level of expertise required to carry out a process (the entire test or the data processing). + LevelOfExpertise + Describes the level of expertise required to carry out a process (the entire test or the data processing). - - - - - DiffusionCoefficientForParticleNumberDensity - Proportionality constant between the particle current density J and the gradient of the particle number density n. - DiffusionCoefficientForParticleNumberDensity - https://www.wikidata.org/wiki/Q98875545 - 10-64 - Proportionality constant between the particle current density J and the gradient of the particle number density n. - + + + + NominalProperty + "Property of a phenomenon, body, or substance, where the property has no magnitude." - - - GreenDownQuark - GreenDownQuark +"A nominal property has a value, which can be expressed in words, by alphanumerical codes, or by other means." + +International vocabulary of metrology (VIM) + An 'ObjectiveProperty' that cannot be quantified. + NominalProperty + An 'ObjectiveProperty' that cannot be quantified. + CFC is a 'sign' that stands for the fact that the morphology of atoms composing the microstructure of an entity is predominantly Cubic Face Centered + +A color is a nominal property. + +Sex of a human being. + nominal property - + - - - - - - - - - - ThomsonCoefficient - quotient of Thomson heat power developed, and the electric current and temperature difference - ThomsonCoefficient - https://qudt.org/vocab/quantitykind/ThomsonCoefficient - https://www.wikidata.org/wiki/Q105801233 - 12-23 - quotient of Thomson heat power developed, and the electric current and temperature difference + + ActivePower + Average power over a period. + ActivePower + https://qudt.org/vocab/quantitykind/ActivePower + https://www.wikidata.org/wiki/Q20820042 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-11-42 + 6-56 + Average power over a period. - - - - - - - - - - Torque - Even though torque has the same physical dimension as energy, it is not of the same kind and can not be measured with energy units like joule or electron volt. - The effectiveness of a force to produce rotation about an axis, measured by the product of the force and the perpendicular distance from the line of action of the force to the axis. - Torque - http://qudt.org/vocab/quantitykind/Torque - 4-12.2 - The effectiveness of a force to produce rotation about an axis, measured by the product of the force and the perpendicular distance from the line of action of the force to the axis. - https://doi.org/10.1351/goldbook.T06400 + + + + Screwing + Screwing (screwing on, screwing in, screwing tight) is joining by pressing on by means of a self-locking thread (from: DIN 8593 Part 3/09.85). + Schrauben + Screwing - + - - - LossFactor - Inverse of the quality factor. - LossFactor - https://qudt.org/vocab/quantitykind/LossFactor - https://www.wikidata.org/wiki/Q79468728 - 6-54 - Inverse of the quality factor. + + + InternalConversionFactor + Quotient of the number of internal conversion electrons and the number of gamma quanta emitted by the radioactive atom in a given transition, where a conversion electron represents an orbital electron emitted through the radioactive decay. + InternalConversionCoefficient + InternalConversionFactor + https://qudt.org/vocab/quantitykind/InternalConversionFactor + https://www.wikidata.org/wiki/Q6047819 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-02-57 + 10-35 + Quotient of the number of internal conversion electrons and the number of gamma quanta emitted by the radioactive atom in a given transition, where a conversion electron represents an orbital electron emitted through the radioactive decay. + + + + + + + + + + + + + + + + + + + + + + FundamentalInteraction + A causal system that is the representation of a Feynman diagram, where quantum represents the real particles entering and exiting the system. + A fundamental physical process is made of one or more standard particles as input, and one or more standard particles as output, where each input is direct cause of each output. +Each fundamental physical phenomena refers to a Feynman diagram, hence is made at least of three standard model particles. +This requirement implies that a physical phenomena is either a decay, annihilation, interaction, collapse or creation phenomena (fundamental) or a composition of them (non-fundamental). + A fundamental system is expressed as a complete bipartite directed graph K(m,n) of quantums, m being the number of originating quantums, and n being the receiving quantums. + FundamentalInteraction + A fundamental physical process is made of one or more standard particles as input, and one or more standard particles as output, where each input is direct cause of each output. +Each fundamental physical phenomena refers to a Feynman diagram, hence is made at least of three standard model particles. +This requirement implies that a physical phenomena is either a decay, annihilation, interaction, collapse or creation phenomena (fundamental) or a composition of them (non-fundamental). + A causal system that is the representation of a Feynman diagram, where quantum represents the real particles entering and exiting the system. + A fundamental system is expressed as a complete bipartite directed graph K(m,n) of quantums, m being the number of originating quantums, and n being the receiving quantums. - + + + + Viscometry + + Viscometry or viscosity method was one of the first methods used for determining the MW of polymers. In this method, the viscosity of polymer solution is measured, and the simplest method used is capillary viscometry by using the Ubbelohde U-tube viscometer. In this method, both the flow time of the polymer solution (t) and the flow time of the pure solvent (t0) are recorded. The ratio of the polymer solution flow time (t) to the flow time of pure solvent (t0) is equal to the ratio of their viscosities (η/η0) only if they have the same densities. + Viscosity + Viscometry + Viscometry or viscosity method was one of the first methods used for determining the MW of polymers. In this method, the viscosity of polymer solution is measured, and the simplest method used is capillary viscometry by using the Ubbelohde U-tube viscometer. In this method, both the flow time of the polymer solution (t) and the flow time of the pure solvent (t0) are recorded. The ratio of the polymer solution flow time (t) to the flow time of pure solvent (t0) is equal to the ratio of their viscosities (η/η0) only if they have the same densities. + + + - + - - IonicStrength - Charge number is a quantity of dimension one defined in ChargeNumber. - For all types of ions in a solution, half the sum of the products of their molality b_i and the square of their charge number z_i. - IonicStrength - https://qudt.org/vocab/quantitykind/IonicStrength - https://www.wikidata.org/wiki/Q898396 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-01-24 - 9-42 - For all types of ions in a solution, half the sum of the products of their molality b_i and the square of their charge number z_i. - https://doi.org/10.1351/goldbook.I03180 - - - - - - - RotationalDisplacement - Quotient of the traversed circular path length of a point in space during a rotation and its distance from the axis or centre of rotation. - AngularDisplacement - RotationalDisplacement - https://www.wikidata.org/wiki/Q3305038 - 3-6 - Quotient of the traversed circular path length of a point in space during a rotation and its distance from the axis or centre of rotation. - https://en.wikipedia.org/wiki/Angular_displacement + + ThermalConductance + Reciprocal of the thermal resistance. + ThermalConductance + https://qudt.org/vocab/quantitykind/ThermalConductance + https://www.wikidata.org/wiki/Q17176562 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-46 + 5-13 + Reciprocal of the thermal resistance. + https://doi.org/10.1351/goldbook.T06298 - - - - - IsentropicCompressibility - IsentropicCompressibility - https://qudt.org/vocab/quantitykind/IsentropicCompressibility - https://www.wikidata.org/wiki/Q2990695 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-32 - 5-5.2 + + + GreenBottomQuark + GreenBottomQuark - - + + - T+1 L0 M-1 I+1 Θ0 N0 J0 + T+1 L0 M-1 I0 Θ0 N0 J0 - ElectricChargePerMassUnit - ElectricChargePerMassUnit + MechanicalMobilityUnit + MechanicalMobilityUnit - + - - + - - T-1 L+2 M0 I0 Θ0 N0 J0 + + - - AreicSpeedUnit - AreicSpeedUnit + + + + DiffusionArea + One-sixth of the mean square distance between the point where a neutron enters a specified class and the point where it leaves this class. + DiffusionArea + https://qudt.org/vocab/quantitykind/DiffusionArea + https://www.wikidata.org/wiki/Q98966292 + 10-72.2 + One-sixth of the mean square distance between the point where a neutron enters a specified class and the point where it leaves this class. - + - - - DonorDensity - Number of donor levels per volume. - DonorDensity - https://qudt.org/vocab/quantitykind/DonorDensity - https://www.wikidata.org/wiki/Q105979886 - 12-29.4 - Number of donor levels per volume. + + IsobaricHeatCapacity + Heat capacity at constant pressure. + HeatCapacityAtConstantPressure + IsobaricHeatCapacity + https://www.wikidata.org/wiki/Q112187490 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-49 + 5-16.2 + Heat capacity at constant pressure. - + - - + - - T-3 L+2 M+1 I-2 Θ0 N0 J0 + + - - ElectricResistanceUnit - ElectricResistanceUnit - - - - - - 3DPrinting - fabrication of objects through the deposition of a material using a print head, nozzle or another printer technology -Note 1 to entry: This term is often used in a non-technical context synonymously with additive manufacturing (3.1.2) and, in these cases, typically associated with machines used for non-industrial purposes including personal use. - Fabrication of objects through the deposition of a material using a print head, nozzle or another printer technology. - This term is often used in a non-technical context synonymously with additive manufacturing and, in these cases, typically associated with machines used for non-industrial purposes including personal use. - 3DPrinting - Fabrication of objects through the deposition of a material using a print head, nozzle or another printer technology. - This term is often used in a non-technical context synonymously with additive manufacturing and, in these cases, typically associated with machines used for non-industrial purposes including personal use. + + + + HeatCapacity + Examples of condition might be constant volume or constant pressure for a gas. + Quantity C = dQ/dT, when the thermodynamic temperature of a system is increased by dT as a result of the addition of a amount of heat dQ, under given condition. + HeatCapacity + https://qudt.org/vocab/quantitykind/HeatCapacity + https://www.wikidata.org/wiki/Q179388 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-47 + https://dbpedia.org/page/Heat_capacity + 5-15 + Quantity C = dQ/dT, when the thermodynamic temperature of a system is increased by dT as a result of the addition of a amount of heat dQ, under given condition. + https://en.wikipedia.org/wiki/Heat_capacity + https://doi.org/10.1351/goldbook.H02753 - - - BlueStrangeAntiQuark - BlueStrangeAntiQuark + + + + URL + The term "Uniform Resource Locator" (URL) refers to the subset of URIs that, in addition to identifying a resource, provide a means of locating the resource by describing its primary access mechanism (e.g., its network "location"). + URL + The term "Uniform Resource Locator" (URL) refers to the subset of URIs that, in addition to identifying a resource, provide a means of locating the resource by describing its primary access mechanism (e.g., its network "location"). - - + + - - + + + + + ElectromagneticEnergyDensity + Arithmetic average of (electric field strength multiplied by electric flux density) and (magnetic field strength multiplied by magnetic flux density) + VolumicElectromagneticEnergy + ElectromagneticEnergyDensity + https://qudt.org/vocab/quantitykind/ElectromagneticEnergyDensity + https://www.wikidata.org/wiki/Q77989624 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-65 + 6-33 + Arithmetic average of (electric field strength multiplied by electric flux density) and (magnetic field strength multiplied by magnetic flux density) + + + + - - - - - - - - - - + + + + + + - - Hyperon - A baryon containing one or more strange quarks, but no charm, bottom, or top quark. - This form of matter may exist in a stable form within the core of some neutron stars. - Hyperon - A baryon containing one or more strange quarks, but no charm, bottom, or top quark. - This form of matter may exist in a stable form within the core of some neutron stars. - https://en.wikipedia.org/wiki/Hyperon - - - - - - - SubProcess - A process which is an holistic spatial part of a process. - In the EMMO the relation of participation to a process falls under mereotopology. - -Since topological connection means causality, then the only way for a real world object to participate to a process is to be a part of it. - SubProcess - A process which is an holistic spatial part of a process. - Breathing is a subprocess of living for a human being. - In the EMMO the relation of participation to a process falls under mereotopology. - -Since topological connection means causality, then the only way for a real world object to participate to a process is to be a part of it. + + + + + + + + + Role + An entity that is categorized according to its relation with a whole through a parthood relation and that contributes to it according to an holistic criterion, where the type of the whole is not the type of the part. + In this class the concept of role and part are superimposed (the term part is also used to define the role played by an actor). +Here entities are categorized according to their relation with the whole, i.e. how they contribute to make a specific whole, and not what they are as separate entities. +This class is expected to host the definition of world objects as they appear in its relation with the surrounding whole (being a part implies being surrounded by something bigger to which it contributes). + HolisticPart + Part + Role + An entity that is categorized according to its relation with a whole through a parthood relation and that contributes to it according to an holistic criterion, where the type of the whole is not the type of the part. + In this class the concept of role and part are superimposed (the term part is also used to define the role played by an actor). +Here entities are categorized according to their relation with the whole, i.e. how they contribute to make a specific whole, and not what they are as separate entities. +This class is expected to host the definition of world objects as they appear in its relation with the surrounding whole (being a part implies being surrounded by something bigger to which it contributes). - + - + - - - MeanMassRange - Product of the mean linear range R and the mass density ρ of the material. - MeanMassRange - https://qudt.org/vocab/quantitykind/MeanMassRange - https://www.wikidata.org/wiki/Q98681670 - 10-57 - Product of the mean linear range R and the mass density ρ of the material. - https://doi.org/10.1351/goldbook.M03783 + + StructureFactor + Mathematical description in crystallography. + StructureFactor + https://qudt.org/vocab/quantitykind/StructureFactor + https://www.wikidata.org/wiki/Q900684 + 12-5.4 + Mathematical description in crystallography. - - - - - Emulsion - An emulsion is a mixture of two or more liquids that are normally immiscible (a liquid-liquid heterogeneous mixture). - Emulsion - An emulsion is a mixture of two or more liquids that are normally immiscible (a liquid-liquid heterogeneous mixture). - Mayonnaise, milk. + + + + TensileTesting + + Tensile testing, also known as tension testing, is a test in which a sample is subjected to a controlled tension until failure. Properties that are directly measured via a tensile test are ultimate tensile strength, breaking strength, maximum elongation and reduction in area. From these measurements the following properties can also be determined: Young's modulus, Poisson's ratio, yield strength, and strain-hardening characteristics. Uniaxial tensile testing is the most commonly used for obtaining the mechanical characteristics of isotropic materials. Some materials use biaxial tensile testing. The main difference between these testing machines being how load is applied on the materials. + TensionTest + TensileTesting + Tensile testing, also known as tension testing, is a test in which a sample is subjected to a controlled tension until failure. Properties that are directly measured via a tensile test are ultimate tensile strength, breaking strength, maximum elongation and reduction in area. From these measurements the following properties can also be determined: Young's modulus, Poisson's ratio, yield strength, and strain-hardening characteristics. Uniaxial tensile testing is the most commonly used for obtaining the mechanical characteristics of isotropic materials. Some materials use biaxial tensile testing. The main difference between these testing machines being how load is applied on the materials. - + - + - - TotalLinearStoppingPower - For charged particles of a given type and energy E0 the differential quotient of E with respect to x, where E is the mean energy lost by the charged particles in traversing a distance x in the given material. - LinearStoppingPower - TotalLinearStoppingPower - https://qudt.org/vocab/quantitykind/TotalLinearStoppingPower - https://www.wikidata.org/wiki/Q908474 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-27 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-12-49 - 10-54 - For charged particles of a given type and energy E0 the differential quotient of E with respect to x, where E is the mean energy lost by the charged particles in traversing a distance x in the given material. - https://doi.org/10.1351/goldbook.S06035 + + Molality + quotient of the amount of substance nB of solute B by the mass m of the solvent: bB = nB / m. + AmountPerMass + Molality + https://www.wikidata.org/wiki/Q172623 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-01-19 + 9-15 + quotient of the amount of substance nB of solute B by the mass m of the solvent: bB = nB / m. + https://doi.org/10.1351/goldbook.M03970 - - - - GalvanostaticIntermittentTitrationTechnique - - electrochemical method that applies current pulses to an electrochemical cell at rest and measures the voltage response - GITT - GalvanostaticIntermittentTitrationTechnique - https://www.wikidata.org/wiki/Q120906986 - electrochemical method that applies current pulses to an electrochemical cell at rest and measures the voltage response + + + + + + + T-1 L+4 M0 I0 Θ0 N0 J0 + + + QuarticLengthPerTimeUnit + QuarticLengthPerTimeUnit - + - Laboratory - The laboratory where the whole characterisation process or some of its stages take place. - Laboratory - The laboratory where the whole characterisation process or some of its stages take place. + + DataAcquisitionRate + Quantifies the raw data acquisition rate, if applicable. + DataAcquisitionRate + Quantifies the raw data acquisition rate, if applicable. - - + + + + + + + T-3 L+2 M+1 I0 Θ-1 N0 J0 + + + ThermalConductanceUnit + ThermalConductanceUnit + + + + + + SubjectiveProperty + A quantity whos value that cannot be univocally determined and depends on an agent (e.g. a human individual, a community). + SubjectiveProperty + A quantity whos value that cannot be univocally determined and depends on an agent (e.g. a human individual, a community). + The measure of beauty on a scale from 1 to 10. + + + + + + SpecificationLanguage + A language used to describe what a computer system should do. + SpecificationLanguage + A language used to describe what a computer system should do. + ACSL, VDM, LOTUS, MML, ... + https://en.wikipedia.org/wiki/Specification_language + + + + + + + + + 1 + + + - + - + - FundamentalMatterParticle - FundamentalMatterParticle + + + + + + + + + Quantity + A quantifiable property of a phenomenon, body, or substance. + VIM defines a quantity as a "property of a phenomenon, body, or substance, where the property has a magnitude that can be expressed as a number and a reference". + +A quantity in EMMO is a property and therefore only addresses the first part of the VIM definition (that is a property of a phenomenon, body, or substance). The second part (that it can be expressed as a number and a reference) is syntactic and addressed by emmo:QuantityValue. + Measurand + Quantity + https://qudt.org/schema/qudt/Quantity + A quantifiable property of a phenomenon, body, or substance. + length +Rockwell C hardness +electric resistance + measurand + quantity + VIM defines a quantity as a "property of a phenomenon, body, or substance, where the property has a magnitude that can be expressed as a number and a reference". + +A quantity in EMMO is a property and therefore only addresses the first part of the VIM definition (that is a property of a phenomenon, body, or substance). The second part (that it can be expressed as a number and a reference) is syntactic and addressed by emmo:QuantityValue. - - - - MercuryPorosimetry - - a method used to measure the pore size distribution and total pore volume of solid materials by infiltrating mercury into the pores under controlled pressure conditions and analyzing the amount of mercury intrusion - MercuryPorosimetry - a method used to measure the pore size distribution and total pore volume of solid materials by infiltrating mercury into the pores under controlled pressure conditions and analyzing the amount of mercury intrusion + + + + + + + + + + + + + + + Fermion + A physical particle with half odd integer spin (1/2, 3/2, etc...) that follows Fermi-Dirac statistics. + Fermion + A physical particle with half odd integer spin (1/2, 3/2, etc...) that follows Fermi-Dirac statistics. + https://en.wikipedia.org/wiki/Fermion - - - - - - - - - - Intensity - Power transferred per unit area. - Intensity - Power transferred per unit area. - https://en.wikipedia.org/wiki/Intensity_(physics) + + + GreenStrangeAntiQuark + GreenStrangeAntiQuark + + + + + + + + + + + + + + + + + + + + + UpAntiQuark + UpAntiQuark + + + + + + + InternalStep + A generic step in a workflow, that is not the begin or the end. + InternalStep + A generic step in a workflow, that is not the begin or the end. + + + + + + ThroughTile + A tile that has next and is next of other tiles within the same tessellation. + ThroughTile + A tile that has next and is next of other tiles within the same tessellation. - - - - - ElectronCharge - The charge of an electron. - The negative of ElementaryCharge. - ElectronCharge - The charge of an electron. - https://doi.org/10.1351/goldbook.E01982 + + + + FormingBlasting + Shot peening is shot peening for shaping or straightening workpieces by introducing residual compressive stresses (from: DIN 8200/10.82). + Umformstrahlen + FormingBlasting - + - - - - - - - - - - ElectricCharge - The physical property of matter that causes it to experience a force when placed in an electromagnetic field. - Charge - ElectricCharge - http://qudt.org/vocab/quantitykind/ElectricCharge - https://www.wikidata.org/wiki/Q1111 - 6-2 - The physical property of matter that causes it to experience a force when placed in an electromagnetic field. - https://doi.org/10.1351/goldbook.E01923 + + ElectricPolarization + At a given point within a domain of quasi-infinitesimal volume V, vector quantity equal to the electric dipole moment p of the substance contained within the domain divided by the volume V. + ElectricPolarization + https://qudt.org/vocab/quantitykind/ElectricPolarization + https://www.wikidata.org/wiki/Q1050425 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-37 + 6-7 + At a given point within a domain of quasi-infinitesimal volume V, vector quantity equal to the electric dipole moment p of the substance contained within the domain divided by the volume V. - - - - - - - - - - Vergence - In geometrical optics, vergence describes the curvature of optical wavefronts. - Vergence - http://qudt.org/vocab/quantitykind/Curvature + + + + DataFiltering + Data filtering is the process of examining a dataset to exclude, rearrange, or apportion data according to certain criteria. + DataFiltering + Data filtering is the process of examining a dataset to exclude, rearrange, or apportion data according to certain criteria. - + - MolecularPartitionFunction - Partition function of a molecule. - MolecularPartitionFunction - https://www.wikidata.org/wiki/Q96192064 - 9-35.4 - Partition function of a molecule. - - - - - - - - - - - - - ScalarMagneticPotential - Scalar potential of an irrotational magnetic field strength. - ScalarMagneticPotential - https://www.wikidata.org/wiki/Q17162107 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-58 - 6-37.1 - Scalar potential of an irrotational magnetic field strength. + + ActivityFactor + ActivityFactor + https://www.wikidata.org/wiki/Q89335167 + 9-22 - + - - NumberOfEntities - Discrete quantity; number of entities of a given kind in a system. - NumberOfEntities - https://www.wikidata.org/wiki/Q614112 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=112-01-09 - 9-1 - Discrete quantity; number of entities of a given kind in a system. - https://doi.org/10.1351/goldbook.N04266 - - - - - - - IterativeStep - A workflow whose output ca be used as input for another workflow of the same type, iteratively, within the framework of a larger workflow. - IterativeStep - A workflow whose output ca be used as input for another workflow of the same type, iteratively, within the framework of a larger workflow. - Jacobi method numerical step, involving the multiplication between a matrix A and a vector x, whose result is used to update the vector x. - - - - - - - - - T0 L+2 M0 I+1 Θ0 N0 J0 - - - MagneticDipoleMomentUnit - MagneticDipoleMomentUnit + + ActivityCoefficient + ActivityCoefficient + https://qudt.org/vocab/quantitykind/ActivityCoefficient + https://www.wikidata.org/wiki/Q745224 + 9-25 + https://doi.org/10.1351/goldbook.A00116 - + - + - - LinearDensityOfElectricCharge - The derivative of the electric charge of a system with respect to the length. - LinearDensityOfElectricCharge - https://www.wikidata.org/wiki/Q77267838 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-09 - 6-5 - The derivative of the electric charge of a system with respect to the length. - - - - - - WorkpieceForming - A manufacturing in which it is formed a solid body with its shape from shapeless original material parts, whose cohesion is created during the process. - ArchetypeForming - PrimitiveForming - WorkpieceForming - - - - - - StandaloneModelSimulation - A standalone simulation, where a single physics equation is solved. - StandaloneModelSimulation - A standalone simulation, where a single physics equation is solved. - - - - - QuantumData - Data that are expressed through quantum mechanical principles, and that can have several values ​​/ be in several states in the same place at the same time (quantum superposition), each of them with a certain probability. - QuantumData - Data that are expressed through quantum mechanical principles, and that can have several values ​​/ be in several states in the same place at the same time (quantum superposition), each of them with a certain probability. + + MassAttenuationCoefficient + Quotient of the linear attenuation coefficient µ and the mass density ρ of the medium. + MassAttenuationCoefficient + https://qudt.org/vocab/quantitykind/MassAttenuationCoefficient + https://www.wikidata.org/wiki/Q98591983 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-04-27 + 10-50 + Quotient of the linear attenuation coefficient µ and the mass density ρ of the medium. - + - - - - - - - - - CharacterisationSystem - - A set of one or more 'CharacterisationInstruments' and often other devices, including any sample holder, reagent and supply, assembled and adapted to give information used to generate 'MeasuredQuantityProperty' within specified intervals for quantities of specified kinds. - Set of one or more measuring instruments and often other components, assembled and -adapted to give information used to generate measured values within specified intervals for -quantities of specified kinds -NOTE 1 The components mentioned in the definition may be devices, reagents, and supplies. -NOTE 2 A measuring system is sometimes referred to as “measuring equipment” or “device”, for example in ISO 10012, -Measurement management systems – Requirements for measurement processes and measuring equipment and ISO -17025, General requirements for the competence of testing and calibration laboratories. -NOTE 3 Although the terms “measuring system” and “measurement system” are frequently used synonymously, the -latter is instead sometimes used to refer to a measuring system plus all other entities involved in a measurement, -including the object under measurement and the person(s) performing the measurement. -NOTE 4 A measuring system can be used as a measurement standard. - CharacterisationSystem - Set of one or more measuring instruments and often other components, assembled and -adapted to give information used to generate measured values within specified intervals for -quantities of specified kinds -NOTE 1 The components mentioned in the definition may be devices, reagents, and supplies. -NOTE 2 A measuring system is sometimes referred to as “measuring equipment” or “device”, for example in ISO 10012, -Measurement management systems – Requirements for measurement processes and measuring equipment and ISO -17025, General requirements for the competence of testing and calibration laboratories. -NOTE 3 Although the terms “measuring system” and “measurement system” are frequently used synonymously, the -latter is instead sometimes used to refer to a measuring system plus all other entities involved in a measurement, -including the object under measurement and the person(s) performing the measurement. -NOTE 4 A measuring system can be used as a measurement standard. - A set of one or more 'CharacterisationInstruments' and often other devices, including any sample holder, reagent and supply, assembled and adapted to give information used to generate 'MeasuredQuantityProperty' within specified intervals for quantities of specified kinds. - Measuring system - - - - - - - - - - - - MeasuringSystem - A set of one or more 'MeasuringInstruments' and often other devices, including any reagent and supply, assembled and adapted to give information used to generate 'MeasuredQuantityProperty' within specified intervals for quantities of specified kinds. - --- VIM - MeasuringSystem - A set of one or more 'MeasuringInstruments' and often other devices, including any reagent and supply, assembled and adapted to give information used to generate 'MeasuredQuantityProperty' within specified intervals for quantities of specified kinds. - --- VIM - measuring system + + Rationale + A set of reasons or a logical basis for a decision or belief + Rationale + A set of reasons or a logical basis for a decision or belief - - - - + + + - - T-1 L0 M-1 I0 Θ0 N+1 J0 + + - - AmountPerMassTimeUnit - AmountPerMassTimeUnit - + + + + + + + + + + + + + PhysicalQuantity + A 'Mathematical' entity that is made of a 'Numeral' and a 'MeasurementUnit' defined by a physical law, connected to a physical entity through a model perspective. Measurement is done according to the same model. + In the same system of quantities, dim ρB = ML−3 is the quantity dimension of mass concentration of component B, and ML−3 is also the quantity dimension of mass density, ρ. +ISO 80000-1 + Measured or simulated 'physical propertiy'-s are always defined by a physical law, connected to a physical entity through a model perspective and measurement is done according to the same model. - - - GluonType1 - GluonType1 - +Systems of units suggests that this is the correct approach, since except for the fundamental units (length, time, charge) every other unit is derived by mathematical relations between these fundamental units, implying a physical laws or definitions. + Measurement units of quantities of the same quantity dimension may be designated by the same name and symbol even when the quantities are not of the same kind. - - - - CreepTesting - - The creep test is a destructive materials testing method for determination of the long-term strength and heat resistance of a material. When running a creep test, the specimen is subjected to increased temperature conditions for an extended period of time and loaded with a constant tensile force or tensile stress. - CreepTesting - The creep test is a destructive materials testing method for determination of the long-term strength and heat resistance of a material. When running a creep test, the specimen is subjected to increased temperature conditions for an extended period of time and loaded with a constant tensile force or tensile stress. +For example, joule per kelvin and J/K are respectively the name and symbol of both a measurement unit of heat capacity and a measurement unit of entropy, which are generally not considered to be quantities of the same kind. + +However, in some cases special measurement unit names are restricted to be used with quantities of specific kind only. + +For example, the measurement unit ‘second to the power minus one’ (1/s) is called hertz (Hz) when used for frequencies and becquerel (Bq) when used for activities of radionuclides. + +As another example, the joule (J) is used as a unit of energy, but never as a unit of moment of force, i.e. the newton metre (N · m). + — quantities of the same kind have the same quantity dimension, +— quantities of different quantity dimensions are always of different kinds, and +— quantities having the same quantity dimension are not necessarily of the same kind. +ISO 80000-1 + PhysicalQuantity + A 'Mathematical' entity that is made of a 'Numeral' and a 'MeasurementUnit' defined by a physical law, connected to a physical entity through a model perspective. Measurement is done according to the same model. - - - GluonType2 - GluonType2 + + + + + Behaviour + A process which is an holistic temporal part of an object. + Behaviour + A process which is an holistic temporal part of an object. + Accelerating is a behaviour of a car. - - - - CharacterisationProtocol - - A characterisation protocol is defined whenever it is desirable to standardize a laboratory method to ensure successful replication of results by others in the same laboratory or by other laboratories. - CharacterisationProtocol - A characterisation protocol is defined whenever it is desirable to standardize a laboratory method to ensure successful replication of results by others in the same laboratory or by other laboratories. + + + + + + + + + + + AmountOfSubstance + "In the name “amount of substance”, the word “substance” will typically be replaced by words to specify the substance concerned in any particular application, for example “amount of hydrogen chloride, HCl”, or “amount of benzene, C6H6 ”. It is important to give a precise definition of the entity involved (as emphasized in the definition of the mole); this should preferably be done by specifying the molecular chemical formula of the material involved. Although the word “amount” has a more general dictionary definition, the abbreviation of the full name “amount of substance” to “amount” may be used for brevity." + +-- SI Brochure + The number of elementary entities present. + AmountOfSubstance + http://qudt.org/vocab/quantitykind/AmountOfSubstance + 9-2 + The number of elementary entities present. + https://doi.org/10.1351/goldbook.A00297 - - - - - BeginStep - An initial step of a workflow. - There may be more than one begin task, if they run in parallel. - BeginStep - An initial step of a workflow. - There may be more than one begin task, if they run in parallel. + + + + Wavelength + Length of the repetition interval of a wave. + Wavelength + https://qudt.org/vocab/quantitykind/Wavelength + https://www.wikidata.org/wiki/Q41364 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-10-10 + https://dbpedia.org/page/Wavelength + 3-19 + Length of the repetition interval of a wave. + https://en.wikipedia.org/wiki/Wavelength + https://doi.org/10.1351/goldbook.W06659 - - - - - - BeginTile - BeginTile + + + + Molds + Molds - - - - ConfigurationLanguage - A construction language used to write configuration files. - ConfigurationLanguage - A construction language used to write configuration files. - .ini files - Files in the standard .config directory on Unix systems. - https://en.wikipedia.org/wiki/Configuration_file#Configuration_languages + + + + Sawing + Cutting with circular or straight cutting motion, using a multi-toothed tool of small cutting width, the cutting motion being performed by the tool + Process of cutting a workpiece into smaller parts that are either doughter parts, samples (e.g. for testing) or scrap. + Sägen + Sawing + Process of cutting a workpiece into smaller parts that are either doughter parts, samples (e.g. for testing) or scrap. - - - - ConstructionLanguage - A computer language by which a human can specify an executable problem solution to a computer. - ConstructionLanguage - A computer language by which a human can specify an executable problem solution to a computer. - https://en.wikipedia.org/wiki/Software_construction#Construction_languages + + + + + MeanFreePathOfPhonons + average distance that phonons travel between two successive interactions + MeanFreePathOfPhonons + https://qudt.org/vocab/quantitykind/PhononMeanFreePath + https://www.wikidata.org/wiki/Q105672255 + 12-15.1 + average distance that phonons travel between two successive interactions - - - - - - - - - - - - + + - - - - + + + + + + - - - - - - - - - - - - EMMO - EMMO entities dimensionality is related to their mereocausal structures. From the no-dimensional quantum entity, we introduce time dimension with the elementary concept, and the spacetime with the causal system concept. -The EMMO conceptualisation does not allow the existence of space without a temporal dimension, the latter coming from a causal relation between entities. -For this reason, the EMMO entities that are not quantum or elementaries, may be considered to be always spatiotemporal. The EMMO poses no constraints to the number of spatial dimensions for a causal system (except being higher than one). - The EMMO conceptualises the world using the primitive concepts of causality and parthood. Parthood is about the composition of world entities starting from other more fundamental entities. Causality is about the interactions between world entities. -The quantum is the smallest indivisible part of any world entity. Quantum individuals are the fundamental causal constituents of the universe, since it is implied that causality originates from quantum-to-quantum interactions. Quantums are no-dimensional, and their aggregation makes spacetime emerge from their causal structure. Causality between macro entities (i.e. entities made of more than one quantum) is explained as the sum of the causality relations between their quantum constituents. -The fundamental distinction between world entities is direct causality self-connectedness: a world entity can be self-connected xor not self-connected depending on the causality network of its fundamental components. -Void regions do not exist in the EMMO, or in other words there is no spacetime without entities, since space and time are measured quantities following a causality relation between entities (spacetime emerges as relational property not as a self-standing entity). -Entities are not placed in space or time: space and time are always relative between entities and are measured. In other words, space and time relations originates from causality interactions. - The class of all the OWL individuals declared by EMMO as standing for world entities. - The disjoint union of the Item and Collection classes. - EMMO - The EMMO conceptualises the world using the primitive concepts of causality and parthood. Parthood is about the composition of world entities starting from other more fundamental entities. Causality is about the interactions between world entities. -The quantum is the smallest indivisible part of any world entity. Quantum individuals are the fundamental causal constituents of the universe, since it is implied that causality originates from quantum-to-quantum interactions. Quantums are no-dimensional, and their aggregation makes spacetime emerge from their causal structure. Causality between macro entities (i.e. entities made of more than one quantum) is explained as the sum of the causality relations between their quantum constituents. -The fundamental distinction between world entities is direct causality self-connectedness: a world entity can be self-connected xor not self-connected depending on the causality network of its fundamental components. -Void regions do not exist in the EMMO, or in other words there is no spacetime without entities, since space and time are measured quantities following a causality relation between entities (spacetime emerges as relational property not as a self-standing entity). -Entities are not placed in space or time: space and time are always relative between entities and are measured. In other words, space and time relations originates from causality interactions. - The disjoint union of the Item and Collection classes. - The class of all the OWL individuals declared by EMMO as standing for world entities. - EMMO entities dimensionality is related to their mereocausal structures. From the no-dimensional quantum entity, we introduce time dimension with the elementary concept, and the spacetime with the causal system concept. -The EMMO conceptualisation does not allow the existence of space without a temporal dimension, the latter coming from a causal relation between entities. -For this reason, the EMMO entities that are not quantum or elementaries, may be considered to be always spatiotemporal. The EMMO poses no constraints to the number of spatial dimensions for a causal system (except being higher than one). + Operator + + The human operator who takes care of the whole characterisation method or sub-processes/stages. + Operator + The human operator who takes care of the whole characterisation method or sub-processes/stages. - - - - - NeutronNumber - Atomic number (proton number) plus neutron number equals mass number. - Number of neutrons in an atomic nucleus. - NeutronNumber - https://www.wikidata.org/wiki/Q970319 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-05-34 - 10-1.2 - Number of neutrons in an atomic nucleus. - Atomic number (proton number) plus neutron number equals mass number. - https://en.wikipedia.org/wiki/Neutron_number - https://doi.org/10.1351/goldbook.N04119 + + + + + Tool + An object that enables or facilitate an agent in the execution of a process that modifies the surrounding environment. + Tool + An object that enables or facilitate an agent in the execution of a process that modifies the surrounding environment. - + - - - NumberOfTurnsInAWinding - NumberOfTurnsInAWinding - https://www.wikidata.org/wiki/Q77995997 - 6-38 - - - - - T-1 L0 M+1 I-1 Θ0 N0 J0 + T-2 L+1 M+1 I0 Θ0 N0 J0 - MassPerElectricChargeUnit - MassPerElectricChargeUnit - - - - - - - CountingUnit - Unit for dimensionless quantities that have the nature of count. - CountingUnit - http://qudt.org/vocab/unit/NUM - 1 - Unit for dimensionless quantities that have the nature of count. - Unit of atomic number -Unit of number of cellular -Unit of degeneracy in quantum mechanics + ForceUnit + ForceUnit - - + + - T+4 L-2 M-1 I+1 Θ0 N0 J0 + T0 L+1 M0 I0 Θ0 N-1 J0 - JosephsonConstantUnit - JosephsonConstantUnit + LengthPerAmountUnit + LengthPerAmountUnit - + - - + - - T-1 L-3 M0 I0 Θ0 N+1 J0 + + - - AmountPerVolumeTimeUnit - AmountPerVolumeTimeUnit - - - - - - ThroughTile - A tile that has next and is next of other tiles within the same tessellation. - ThroughTile - A tile that has next and is next of other tiles within the same tessellation. - - - - - - Exponent - Exponent + + + + SpecificVolume + inverse of the mass density ρ, thus v = 1/ρ. + MassicVolume + SpecificVolume + https://qudt.org/vocab/quantitykind/SpecificVolume + https://www.wikidata.org/wiki/Q683556 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-09 + 4-3 + inverse of the mass density ρ, thus v = 1/ρ. + https://doi.org/10.1351/goldbook.S05807 - - - - AlgebricOperator - AlgebricOperator + + + + ModelledProperty + A quantity obtained from a well-defined modelling procedure. + ModelledProperty + A quantity obtained from a well-defined modelling procedure. - + - T-2 L+4 M0 I0 Θ0 N0 J0 + T0 L-2 M0 I0 Θ0 N+1 J0 - MassStoppingPowerUnit - MassStoppingPowerUnit + AmountPerAreaUnit + AmountPerAreaUnit - - - StandardUnit - A reference unit provided by a reference material. -International vocabulary of metrology (VIM) - ReferenceMaterial - StandardUnit - A reference unit provided by a reference material. -International vocabulary of metrology (VIM) - Arbitrary amount-of-substance concentration of lutropin in a given sample of plasma (WHO international standard 80/552): 5.0 International Unit/l + + + + + GrandCanonicalPartionFunction + GrandPartionFunction + GrandCanonicalPartionFunction + https://qudt.org/vocab/quantitykind/GrandCanonicalPartitionFunction + https://www.wikidata.org/wiki/Q96176022 + 9-35.3 - + - - - StoichiometricNumberOfSubstance - StoichiometricNumberOfSubstance - https://qudt.org/vocab/quantitykind/StoichiometricNumber - https://www.wikidata.org/wiki/Q95443720 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-01-22 - 9-29 - https://doi.org/10.1351/goldbook.S06025 + + + NeelTemperature + Critical thermodynamic temperature of an antiferromagnet. + NeelTemperature + https://www.wikidata.org/wiki/Q830311 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-12-52 + 12-35.2 + Critical thermodynamic temperature of an antiferromagnet. - + + + PotentialEnergy + The energy possessed by a body by virtue of its position or orientation in a potential field. + PotentialEnergy + http://qudt.org/vocab/quantitykind/PotentialEnergy + 4-28.1 + The energy possessed by a body by virtue of its position or orientation in a potential field. + https://doi.org/10.1351/goldbook.P04778 + + + + - - + + - - - AreaDensity - Mass per unit area. - AreaDensity - http://qudt.org/vocab/quantitykind/SurfaceDensity - https://doi.org/10.1351/goldbook.S06167 + + ProbeSampleInteraction + + Process representing the interaction between the Probe and the Sample (with a certain Interaction Volume) which generates a Signal + ProbeSampleInteraction + Process representing the interaction between the Probe and the Sample (with a certain Interaction Volume) which generates a Signal - + - - UserCase - High level description of the user case. It can include the properties of the material, the conditions of the environment and possibly mentioning which are the industrial sectors of reference. - UserCase - High level description of the user case. It can include the properties of the material, the conditions of the environment and possibly mentioning which are the industrial sectors of reference. + + + + + + + + + + + + + + + + CharacterisationWorkflow + A characterisation procedure that has at least two characterisation tasks as proper parts. + CharacterisationWorkflow + A characterisation procedure that has at least two characterisation tasks as proper parts. - - - - String - A physical made of more than one symbol sequentially arranged. - A string is made of concatenated symbols whose arrangement is one-dimensional. Each symbol can have only one previous and one next neighborhood (bidirectional list). - String - A physical made of more than one symbol sequentially arranged. - The word "cat" considered as a collection of 'symbol'-s respecting the rules of english language. - -In this example the 'symbolic' entity "cat" is not related to the real cat, but it is only a word (like it would be to an italian person that ignores the meaning of this english word). - -If an 'interpreter' skilled in english language is involved in a 'semiotic' process with this word, that "cat" became also a 'sign' i.e. it became for the 'interpreter' a representation for a real cat. - A string is made of concatenated symbols whose arrangement is one-dimensional. Each symbol can have only one previous and one next neighborhood (bidirectional list). - A string is not requested to respect any syntactic rule: it's simply directly made of symbols. + + + + + + + + + + + + + + Manufacturer + A strict fundamental object overcrossing a manufacturing process, the intersection being the agent that participates and drives the manufacturing process. + Manufacturer + A strict fundamental object overcrossing a manufacturing process, the intersection being the agent that participates and drives the manufacturing process. - - - + + - - - T0 L-2 M+1 I0 Θ0 N0 J0 - + + + + + + - AreaDensityUnit - AreaDensityUnit + StrictFundamental + The class of individuals that satisfy a whole defining criteria (i.e. belongs to a subclass of whole) and have no proper parts that satisfy that same criteria (no parts that are of the same type of the whole). + StrictFundamental + The class of individuals that satisfy a whole defining criteria (i.e. belongs to a subclass of whole) and have no proper parts that satisfy that same criteria (no parts that are of the same type of the whole). - - - CeramicMaterial - CeramicMaterial + + + + IntermediateSample + + IntermediateSample - - - - - - - T-2 L+3 M+1 I0 Θ0 N-1 J0 - - - EnergyLengthPerAmountUnit - EnergyLengthPerAmountUnit + + + + AlgebricOperator + AlgebricOperator - + - T-1 L+3 M0 I0 Θ0 N-1 J0 + T+4 L-1 M-1 I+2 Θ0 N0 J0 - VolumePerAmountTimeUnit - VolumePerAmountTimeUnit + CapacitancePerLengthUnit + CapacitancePerLengthUnit - - + + - - + + + + + + - - - ActivityDensity - Activity per unit volume of the sample. - ActivityConcentration - VolumetricActivity - VolumicActivity - ActivityDensity - https://qudt.org/vocab/quantitykind/ActivityConcentration - https://www.wikidata.org/wiki/Q423263 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-09 - 10-29 - Activity per unit volume of the sample. + Component + A constituent of a system. + Component + A constituent of a system. - - - + + + + LinkedModelsSimulation + A chain of linked physics based model simulations, where equations are solved sequentially. + LinkedModelsSimulation + A chain of linked physics based model simulations, where equations are solved sequentially. + + + + + + MultiSimulation + A physics based simulation with multiple physics based models. + MultiSimulation + A physics based simulation with multiple physics based models. + + + + + - - - T0 L-3 M0 I0 Θ0 N+1 J0 - + + + + + + - AmountConcentrationUnit - AmountConcentrationUnit + Program + A program is a sequence of instructions understandable by a computer's central processing unit (CPU) that indicates which operations the computer should perform on a set of data. + A set of instructions that tell a computer what to do. + Executable + Program + A set of instructions that tell a computer what to do. + A program is a sequence of instructions understandable by a computer's central processing unit (CPU) that indicates which operations the computer should perform on a set of data. - - - - Nexafs - - Near edge X-ray absorption fine structure (NEXAFS), also known as X-ray absorption near edge structure (XANES), is a type of absorption spectroscopy that indicates the features in the X-ray absorption spectra (XAS) of condensed matter due to the photoabsorption cross section for electronic transitions from an atomic core level to final states in the energy region of 50–100 eV above the selected atomic core level ionization energy, where the wavelength of the photoelectron is larger than the interatomic distance between the absorbing atom and its first neighbour atoms. - Nexafs - Near edge X-ray absorption fine structure (NEXAFS), also known as X-ray absorption near edge structure (XANES), is a type of absorption spectroscopy that indicates the features in the X-ray absorption spectra (XAS) of condensed matter due to the photoabsorption cross section for electronic transitions from an atomic core level to final states in the energy region of 50–100 eV above the selected atomic core level ionization energy, where the wavelength of the photoelectron is larger than the interatomic distance between the absorbing atom and its first neighbour atoms. + + + + Software + All or part of the programs, procedures, rules, and associated documentation of an information processing system. + Software is usually used as a generic term for programs. However, in its broadest sense it can refer to all information (i.e., both programs and data) in electronic form and can provide a distinction from hardware, which refers to computers or other electronic systems on which software can exist and be use. +Here we explicitly include in the definition also all the data (e.g. source code, script files) that takes part to the building of the executable, are necessary to the execution of a program or that document it for the users. + Software + All or part of the programs, procedures, rules, and associated documentation of an information processing system. + Software is usually used as a generic term for programs. However, in its broadest sense it can refer to all information (i.e., both programs and data) in electronic form and can provide a distinction from hardware, which refers to computers or other electronic systems on which software can exist and be use. +Here we explicitly include in the definition also all the data (e.g. source code, script files) that takes part to the building of the executable, are necessary to the execution of a program or that document it for the users. - - - ElementaryFermion - ElementaryFermion + + + + + AbsoluteActivity + The exponential of the ratio of the chemical potential to R*T where R is the gas constant and T the thermodynamic temperature. + AbsoluteActivity + https://qudt.org/vocab/quantitykind/AbsoluteActivity + https://www.wikidata.org/wiki/Q56638155 + 9-18 + The exponential of the ratio of the chemical potential to R*T where R is the gas constant and T the thermodynamic temperature. + https://goldbook.iupac.org/terms/view/A00019 - - - - PseudoOpenCircuitVoltageMethod - - a technique used to measure the voltage of a cell under a low applied current as an estimate for the open-circuit voltage - PseudoOCV - PseudoOpenCircuitVoltageMethod - a technique used to measure the voltage of a cell under a low applied current as an estimate for the open-circuit voltage + + + + + + + T0 L0 M0 I0 Θ0 N0 J+1 + + + LuminousIntensityUnit + LuminousIntensityUnit - + - T+1 L+1 M-1 I0 Θ0 N0 J0 + T+2 L0 M-1 I+1 Θ+1 N0 J0 - LengthTimePerMassUnit - LengthTimePerMassUnit + TemperaturePerMagneticFluxDensityUnit + TemperaturePerMagneticFluxDensityUnit - + - - - VolumeFraction - Volume of a constituent of a mixture divided by the sum of volumes of all constituents prior to mixing. - VolumeFraction - http://qudt.org/vocab/quantitykind/VolumeFraction - 9-14 - Volume of a constituent of a mixture divided by the sum of volumes of all constituents prior to mixing. - https://doi.org/10.1351/goldbook.V06643 + + + ThermodynamicGrueneisenParameter + ThermodynamicGrueneisenParameter + https://www.wikidata.org/wiki/Q105658620 + 12-13 - - + + - - - - - - + + - - - - - - - - - Role - An entity that is categorized according to its relation with a whole through a parthood relation and that contributes to it according to an holistic criterion, where the type of the whole is not the type of the part. - In this class the concept of role and part are superimposed (the term part is also used to define the role played by an actor). -Here entities are categorized according to their relation with the whole, i.e. how they contribute to make a specific whole, and not what they are as separate entities. -This class is expected to host the definition of world objects as they appear in its relation with the surrounding whole (being a part implies being surrounded by something bigger to which it contributes). - HolisticPart - Part - Role - An entity that is categorized according to its relation with a whole through a parthood relation and that contributes to it according to an holistic criterion, where the type of the whole is not the type of the part. - In this class the concept of role and part are superimposed (the term part is also used to define the role played by an actor). -Here entities are categorized according to their relation with the whole, i.e. how they contribute to make a specific whole, and not what they are as separate entities. -This class is expected to host the definition of world objects as they appear in its relation with the surrounding whole (being a part implies being surrounded by something bigger to which it contributes). + + + MolarConductivity + Conductivity per molar concentration of electrolyte. + MolarConductivity + https://qudt.org/vocab/quantitykind/MolarConductivity + https://www.wikidata.org/wiki/Q1943278 + 9-45 + Conductivity per molar concentration of electrolyte. + https://doi.org/10.1351/goldbook.M03976 + + + + + + + ParticleEmissionRate + Differential quotient of N with respect to time, where N is the number of particles being emitted from an infinitesimally small volume element in the time interval of duration dt, and dt. + ParticleEmissionRate + https://www.wikidata.org/wiki/Q98153151 + 10-36 + Differential quotient of N with respect to time, where N is the number of particles being emitted from an infinitesimally small volume element in the time interval of duration dt, and dt. + + + + + + FunctionallyDefinedMaterial + FunctionallyDefinedMaterial + + + + + + CategorizedPhysicalQuantity + The superclass for all physical quantities classes that are categorized according to some domain of interests (e.g. metallurgy, chemistry), property (intensive/extensive) or application. + https://physics.nist.gov/cuu/Constants + CategorizedPhysicalQuantity + The superclass for all physical quantities classes that are categorized according to some domain of interests (e.g. metallurgy, chemistry), property (intensive/extensive) or application. - + + + + Soldering + Method of joining metallic materials with the aid of a molten filler metal (solder), optionally with the use of flow agents + Löten + Soldering + + + - - - - - T+2 L0 M-1 I+1 Θ0 N0 J0 - - - ElectricMobilityUnit - ElectricMobilityUnit + + + OsmoticPressure + Measure of the tendency of a solution to take in pure solvent by osmosis. + OsmoticPressure + https://qudt.org/vocab/quantitykind/OsmoticPressure + https://www.wikidata.org/wiki/Q193135 + 9-28 + Measure of the tendency of a solution to take in pure solvent by osmosis. + https://doi.org/10.1351/goldbook.O04344 - + + + + + GibbsEnergy + Type of thermodynamic potential; useful for calculating reversible work in certain systems. + GibbsFreeEnergy + GibbsEnergy + https://www.wikidata.org/wiki/Q334631 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-23 + 5-20.5 + Type of thermodynamic potential; useful for calculating reversible work in certain systems. + https://doi.org/10.1351/goldbook.G02629 + + + - Person - Person + + Calorimetry + In chemistry and thermodynamics, calorimetry (from Latin calor 'heat', and Greek μέτρον (metron) 'measure') is the science or act of measuring changes in state variables of a body for the purpose of deriving the heat transfer associated with changes of its state due, for example, to chemical reactions, physical changes, or phase transitions under specified constraints. Calorimetry is performed with a calorimeter. + Calorimetry + In chemistry and thermodynamics, calorimetry (from Latin calor 'heat', and Greek μέτρον (metron) 'measure') is the science or act of measuring changes in state variables of a body for the purpose of deriving the heat transfer associated with changes of its state due, for example, to chemical reactions, physical changes, or phase transitions under specified constraints. Calorimetry is performed with a calorimeter. - - - - - - - T0 L-1 M+1 I0 Θ0 N0 J0 - - - MassPerLengthUnit - MassPerLengthUnit + + + + + + + + + + + + + + + + + + + + + + + + StateOfMatter + A superclass made as the disjoint union of all the form under which matter can exist. + In physics, a state of matter is one of the distinct forms in which matter can exist. Four states of matter are observable in everyday life: solid, liquid, gas, and plasma. + StateOfMatter + A superclass made as the disjoint union of all the form under which matter can exist. + In physics, a state of matter is one of the distinct forms in which matter can exist. Four states of matter are observable in everyday life: solid, liquid, gas, and plasma. + https://en.wikipedia.org/wiki/State_of_matter - - - - - - - - - - - - Data - A data is a causal object whose variations (non-uniformity) can be recognised and eventually interpreted. -A data can be of different physical types (e.g., matter, wave, atomic excited states). -How the variations are recognised and eventually decoded depends on the interpreting rules that characterise that type of data. -Variations are pure physical variations and do not necessarily possess semantic meaning. - A perspective in which entities are represented according to the variation of their properties. - Luciano Floridi, "Information - A very Short Introduction", Oxford University Press., (2010) ISBN 978-0199551378 - Contrast - Dedomena - Pattern - Data - A perspective in which entities are represented according to the variation of their properties. - A data is a causal object whose variations (non-uniformity) can be recognised and eventually interpreted. -A data can be of different physical types (e.g., matter, wave, atomic excited states). -How the variations are recognised and eventually decoded depends on the interpreting rules that characterise that type of data. -Variations are pure physical variations and do not necessarily possess semantic meaning. - The covering axiom that defines the data class discriminates within all the possible causal objects between encoded or non encoded. + + + TauAntiNeutrino + TauAntiNeutrino - - - - DynamicLightScattering - - Dynamic light scattering (DLS) is a technique in physics that can be used to determine the size distribution profile of small particles in suspension or polymers in solution. In the scope of DLS, temporal fluctuations are usually analyzed using the intensity or photon auto-correlation function (also known as photon correlation spectroscopy - PCS or quasi-elastic light scattering - QELS). - DLS - DynamicLightScattering - Dynamic light scattering (DLS) is a technique in physics that can be used to determine the size distribution profile of small particles in suspension or polymers in solution. In the scope of DLS, temporal fluctuations are usually analyzed using the intensity or photon auto-correlation function (also known as photon correlation spectroscopy - PCS or quasi-elastic light scattering - QELS). + + + + + StatisticalWeightOfSubsystem + StatisticalWeightOfSubsystem + https://www.wikidata.org/wiki/Q96207431 + 9-36.1 - + + + + + ThermoelectricVoltage + Voltage between substances a and b caused by the thermoelectric effect. + ThermoelectricVoltage + https://www.wikidata.org/wiki/Q105761637 + 12-20 + Voltage between substances a and b caused by the thermoelectric effect. + + + - + - SpecificActivity - Quotient of the activity A of a sample and the mass m of that sample. - MassicActivity - SpecificActivity - https://qudt.org/vocab/quantitykind/SpecificActivity - https://www.wikidata.org/wiki/Q2823748 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-08 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-04-43 - 10-28 - Quotient of the activity A of a sample and the mass m of that sample. - https://doi.org/10.1351/goldbook.S05790 - - - - - - ScanningElectronMicroscopy - - The scanning electron microscope (SEM) uses a focused beam of high-energy electrons to generate a variety of signals at the surface of solid specimens. The signals that derive from electron-sample interactions reveal information about the sample including external morphology (texture), chemical composition, and crystalline structure and orientation of materials making up the sample. - SEM - ScanningElectronMicroscopy - The scanning electron microscope (SEM) uses a focused beam of high-energy electrons to generate a variety of signals at the surface of solid specimens. The signals that derive from electron-sample interactions reveal information about the sample including external morphology (texture), chemical composition, and crystalline structure and orientation of materials making up the sample. + GyromagneticRatio + Ratio of magnetic dipole moment to total angular momentum. + GyromagneticCoefficient + MagnetogyricRatio + GyromagneticRatio + https://qudt.org/vocab/quantitykind/GyromagneticRatio + https://www.wikidata.org/wiki/Q634552 + 10-12.1 + Ratio of magnetic dipole moment to total angular momentum. + https://doi.org/10.1351/goldbook.M03693 - + - - - InfiniteMultiplicationFactor - In nuclear physics, the multiplication factor for an infinite medium. - InfiniteMultiplicationFactor - https://qudt.org/vocab/quantitykind/InfiniteMultiplicationFactor - https://www.wikidata.org/wiki/Q99440487 - 10-78.2 - In nuclear physics, the multiplication factor for an infinite medium. + + + + + + + + + + Volume + Extent of an object in space. + Volume + http://qudt.org/vocab/quantitykind/Volume + https://www.wikidata.org/wiki/Q39297 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=102-04-40 + https://dbpedia.org/page/Volume + 3-4 - - - DerivedQuantity - "Quantity, in a system of quantities, defined in terms of the base quantities of that system". - DerivedQuantity - "Quantity, in a system of quantities, defined in terms of the base quantities of that system". - derived quantity + + + + FlexuralForming + Forming of a solid body, whereby the plastic state is essentially brought about by a bending stress. + Biegeumformen + FlexuralForming - - - - InternationalSystemOfQuantity - Quantities declared under the ISO 80000. - https://www.iso.org/obp/ui/#iso:std:iso:80000:-1:ed-1:v1:en:sec:3.1 - InternationalSystemOfQuantity - Quantities declared under the ISO 80000. - https://en.wikipedia.org/wiki/International_System_of_Quantities + + + + BrunauerEmmettTellerMethod + A technique used to measure the specific surface area of porous materials by analyzing the adsorption of gas molecules onto the material's surface + BET + BrunauerEmmettTellerMethod + https://www.wikidata.org/wiki/Q795838 + A technique used to measure the specific surface area of porous materials by analyzing the adsorption of gas molecules onto the material's surface + https://en.wikipedia.org/wiki/BET_theory - - - BlueTopAntiQuark - BlueTopAntiQuark + + + + GasAdsorptionPorosimetry + + Gas Adsorption Porosimetry is a method used for analyzing the surface area and porosity of materials. In this method, a gas, typically nitrogen or argon, is adsorbed onto the surface of the material at various pressures and temperatures. + GasAdsorptionPorosimetry + GasAdsorptionPorosimetry + Gas Adsorption Porosimetry is a method used for analyzing the surface area and porosity of materials. In this method, a gas, typically nitrogen or argon, is adsorbed onto the surface of the material at various pressures and temperatures. - + - - - - ActivityFactor - ActivityFactor - https://www.wikidata.org/wiki/Q89335167 - 9-22 + + + + HeatFlowRate + Amount of heat through a surface during a time interval divided by the duration of this interval. + HeatFlowRate + https://qudt.org/vocab/quantitykind/HeatFlowRate + https://www.wikidata.org/wiki/Q12160631 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-36 + 5-7 + Amount of heat through a surface during a time interval divided by the duration of this interval. - + - - - ActivityCoefficient - ActivityCoefficient - https://qudt.org/vocab/quantitykind/ActivityCoefficient - https://www.wikidata.org/wiki/Q745224 - 9-25 - https://doi.org/10.1351/goldbook.A00116 + + + DensityOfHeatFlowRate + At a fixed point in a medium, the direction of propagation of heat is opposite to the temperature gradient. At a point on the surface separating two media with different temperatures, the direction of propagation of heat is normal to the surface, from higher to lower temperatures. + Vector quantity with magnitude equal to the heat flow rate dΦ through a surface element divided by the area dA of the element, and direction eφ in the direction of propagation of heat. + AreicHeatFlowRate + DensityOfHeatFlowRate + https://www.wikidata.org/wiki/Q1478382 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-37 + 5-8 + Vector quantity with magnitude equal to the heat flow rate dΦ through a surface element divided by the area dA of the element, and direction eφ in the direction of propagation of heat. + https://doi.org/10.1351/goldbook.H02755 - + - - + - - T-3 L0 M+1 I0 Θ-1 N0 J0 + + - - ThermalTransmittanceUnit - ThermalTransmittanceUnit - - - - - - CharacterisedSample - - The sample after having been subjected to a characterization process - CharacterisedSample - The sample after having been subjected to a characterization process - - - - - PhysicalyUnbonded - PhysicalyUnbonded - - - - - Electron - The class of individuals that stand for electrons elementary particles belonging to the first generation of leptons. - Electron - The class of individuals that stand for electrons elementary particles belonging to the first generation of leptons. - https://en.wikipedia.org/wiki/Electron + + + + ScalarMagneticPotential + Scalar potential of an irrotational magnetic field strength. + ScalarMagneticPotential + https://www.wikidata.org/wiki/Q17162107 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-58 + 6-37.1 + Scalar potential of an irrotational magnetic field strength. - + - - MagneticQuantumNumber - Atomic quantum number related to the z component lz, jz or sz, of the orbital, total, or spin angular momentum. - MagneticQuantumNumber - https://qudt.org/vocab/quantitykind/MagneticQuantumNumber - https://www.wikidata.org/wiki/Q2009727 - 10-13.4 - Atomic quantum number related to the z component lz, jz or sz, of the orbital, total, or spin angular momentum. - - - - - ContinuumModel - A physics-based model based on a physics equation describing the behaviour of continuum volume. - ContinuumModel - A physics-based model based on a physics equation describing the behaviour of continuum volume. + + + DiffusionCoefficientForFluenceRate + Proportionality constant between the particle current density J and the gradient of the particle fluence rate. + DiffusionCoefficientForFluenceRate + https://qudt.org/vocab/quantitykind/DiffusionCoefficientForFluenceRate + https://www.wikidata.org/wiki/Q98876254 + 10-65 + Proportionality constant between the particle current density J and the gradient of the particle fluence rate. - - - - MathematicalFunction - A function defined using functional notation. - A mathematical relation that relates each element in the domain (X) to exactly one element in the range (Y). - FunctionDefinition - MathematicalFunction - A function defined using functional notation. - y = f(x) + + + AnalogData + Data that are decoded retaining its continuous variations characteristic. + The fact that there may be a finite granularity in the variations of the material basis (e.g. the smallest peak in a vynil that can be recognized by the piezo-electric transducer) does not prevent a data to be analog. It means only that the focus on such data encoding is on a scale that makes such variations negligible, making them practically a continuum. + AnalogData + Data that are decoded retaining its continuous variations characteristic. + A vynil contain continuous information about the recorded sound. + The fact that there may be a finite granularity in the variations of the material basis (e.g. the smallest peak in a vynil that can be recognized by the piezo-electric transducer) does not prevent a data to be analog. It means only that the focus on such data encoding is on a scale that makes such variations negligible, making them practically a continuum. - - - - DefiningEquation - An equation that define a new variable in terms of other mathematical entities. - DefiningEquation - An equation that define a new variable in terms of other mathematical entities. - The definition of velocity as v = dx/dt. - -The definition of density as mass/volume. - -y = f(x) + + + + Diameter + The diameter of a circle or a sphere is twice its radius. + maximal distance of two points of an object, in a given direction or along a straight line passing through the centre. + Diameter + https://qudt.org/vocab/quantitykind/Diameter + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-01-27 + https://dbpedia.org/page/Diameter + 3-1.5 + maximal distance of two points of an object, in a given direction or along a straight line passing through the centre. + https://en.wikipedia.org/wiki/Diameter - - + + - T+3 L-1 M-1 I0 Θ0 N0 J+1 - - - LuminousEfficacyUnit - LuminousEfficacyUnit - - - - - - - - - - - - - - - - - AtomicNumber - Number of protons in an atomic nucleus. - AtomicNumber - http://qudt.org/vocab/quantitykind/AtomicNumber - Number of protons in an atomic nucleus. - 10-1.1 - https://doi.org/10.1351/goldbook.A00499 - - - - - - - - - - - - - - - 1 - - - - - - - + T0 L+2 M0 I0 Θ-1 N0 J0 - Integer - An integer number. - Integer - An integer number. - - - - - - DisplacementCurrent - Scalar quantity equal to the flux of the displacement current density JD through a given directed surface S. - DisplacementCurrent - https://qudt.org/vocab/quantitykind/DisplacementCurrent - https://www.wikidata.org/wiki/Q853178 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-43 - 6-19.1 - Scalar quantity equal to the flux of the displacement current density JD through a given directed surface S. + AreaPerTemperatureUnit + AreaPerTemperatureUnit - - - Datum - A self-consistent encoded data entity. - Datum - A self-consistent encoded data entity. - A character, a bit, a song in a CD. + + + + + SurfaceCoefficientOfHeatTransfer + Coefficient of heat transfer when heat exchange takes place between a body at thermodynamic temperature Ts and its surroundings that are at a reference temperature Tr. + SurfaceCoefficientOfHeatTransfer + https://qudt.org/vocab/quantitykind/SurfaceCoefficientOfHeatTransfer + https://www.wikidata.org/wiki/Q74770365 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-40 + 5-10.2 + Coefficient of heat transfer when heat exchange takes place between a body at thermodynamic temperature Ts and its surroundings that are at a reference temperature Tr. - - + + - - + + - - - File - In computing, a computer file is a resource for recording data on a computer storage device, primarily identified by its file path. - File - In computing, a computer file is a resource for recording data on a computer storage device, primarily identified by its file path. + + + CoefficientOfHeatTransfer + At a point on the surface separating two media with different thermodynamic temperatures, magnitude of the density of heat flow rate φ divided by the absolute value of temperature difference ΔT. + ThermalTransmittance + CoefficientOfHeatTransfer + https://qudt.org/vocab/quantitykind/CoefficientOfHeatTransfer + https://www.wikidata.org/wiki/Q634340 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-39 + 5-10.1 + At a point on the surface separating two media with different thermodynamic temperatures, magnitude of the density of heat flow rate φ divided by the absolute value of temperature difference ΔT. - + - + + - - + + T0 L0 M-1 I0 Θ0 N+1 J0 - - - - LinearEnergyTransfer - Measure for the energy lost by charged particles per traversed distance, including only interactions up to a given energy. - LinearEnergyTransfer - https://qudt.org/vocab/quantitykind/LinearEnergyTransfer - https://www.wikidata.org/wiki/Q1699996 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-30 - 10-85 - Measure for the energy lost by charged particles per traversed distance, including only interactions up to a given energy. - https://doi.org/10.1351/goldbook.L03550 + + AmountPerMassUnit + AmountPerMassUnit - - + + + + UnitOne + "The unit one is the neutral element of any system of units – necessary and present automatically." + +-- SI Brochure + Represents the number 1, used as an explicit unit to say something has no units. + Unitless + UnitOne + http://qudt.org/vocab/unit/UNITLESS + Represents the number 1, used as an explicit unit to say something has no units. + "The unit one is the neutral element of any system of units – necessary and present automatically." + +-- SI Brochure + Refractive index or volume fraction. + Typically used for ratios of two units whos dimensions cancels out. + + + + + - - - - - - + + + T-1 L0 M0 I0 Θ0 N0 J0 + - CompositeFermion - CompositeFermion - Examples of composite particles with half-integer spin: -spin 1/2: He3 in ground state, proton, neutron -spin 3/2: He5 in ground state, Delta baryons (excitations of the proton and neutron) + FrequencyUnit + FrequencyUnit - - + + - + - + - - Manufacturer - A strict fundamental object overcrossing a manufacturing process, the intersection being the agent that participates and drives the manufacturing process. - Manufacturer - A strict fundamental object overcrossing a manufacturing process, the intersection being the agent that participates and drives the manufacturing process. + + + + + + + + + Declarer + An interpreter who establish the connection between an conventional sign and an object according to a specific convention. + Declarer + An interpreter who establish the connection between an conventional sign and an object according to a specific convention. + A scientist that assigns a quantity to a physical objects without actually measuring it but taking it for granted due to its previous experience (e.g. considering an electron charge as 1.6027663e-19 C, assigning a molecular mass to a gas only by the fact of a name on the bottle). + Someone who assigns a name to an object. - - - Graviton - The class of individuals that stand for gravitons elementary particles. - While this particle is only supposed to exist, the EMMO approach to classical and quantum systems represents fields as made of particles. - -For this reason graviton is an useful concept to homogenize the approach between different fields. - Graviton - The class of individuals that stand for gravitons elementary particles. - While this particle is only supposed to exist, the EMMO approach to classical and quantum systems represents fields as made of particles. - -For this reason graviton is an useful concept to homogenize the approach between different fields. - https://en.wikipedia.org/wiki/Graviton + + + + DCPolarography + Linear scan voltammetry with slow scan rate in which a dropping mercury electrode is used as the working electrode. If the whole scan is performed on a single growing drop, the technique should be called single drop scan voltammetry. The term polarography in this context is discouraged. This is the oldest variant of polarographic techniques, introduced by Jaroslav Heyrovský (1890 – 1967). Usually the drop time is between 1 and 5 s and the pseudo-steady-state wave-shaped dependence on potential is called a polarogram. If the limiting current is controlled by diffusion, it is expressed by the Ilkovich equation. + DCPolarography + Linear scan voltammetry with slow scan rate in which a dropping mercury electrode is used as the working electrode. If the whole scan is performed on a single growing drop, the technique should be called single drop scan voltammetry. The term polarography in this context is discouraged. This is the oldest variant of polarographic techniques, introduced by Jaroslav Heyrovský (1890 – 1967). Usually the drop time is between 1 and 5 s and the pseudo-steady-state wave-shaped dependence on potential is called a polarogram. If the limiting current is controlled by diffusion, it is expressed by the Ilkovich equation. + https://doi.org/10.1515/pac-2018-0109 - - + + - T0 L-1 M0 I0 Θ-1 N0 J0 + T0 L-2 M+1 I0 Θ0 N0 J0 - PerLengthTemperatureUnit - PerLengthTemperatureUnit + AreaDensityUnit + AreaDensityUnit - + + + + Computation + A procedure that deals with quantitative symbols (i.e. symbols associated with a quantitative oriented language). + Computation + A procedure that deals with quantitative symbols (i.e. symbols associated with a quantitative oriented language). + A matematician that calculates 2+2. +A computation machine that calculate the average value of a dataset. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + EncodedData + A causal object whose properties variation are encoded by an agent and that can be decoded by another agent according to a specific rule. + Variations in data are generated by an agent (not necessarily human) and are intended to be decoded by the same or another agent using the same encoding rules. +Data are always generated by an agent but not necessarily possess a semantic meaninig, either because it's lost or unknown or because simply they possess none (e.g. a random generation of symbols). +A data object may be used as the physical basis for a sign, under Semiotics perspective. + We call "decoding" the act of recognise the variation according to a particular rule and generate another equivalent schema (e.g. in the agent's cognitive apparatus, as another form of data). +We call "interpreting" the act of providing semantic meaning to data, which is covered by the semiotic perspective. + EncodedVariation + EncodedData + A causal object whose properties variation are encoded by an agent and that can be decoded by another agent according to a specific rule. + A Radio Morse Code transmission can be addressed by combination of perspectives. + +Physicalistic: the electromagnetic pulses can be defined as individual A (of type Field) and the strip of paper coming out a printer receiver can be defined as individual B (of type Matter). +Data: both A and B are also DiscreteData class individuals. In particular they may belong to a MorseData class, subclass of DiscreteData. +Perceptual: B is an individual belonging to the graphical entities expressing symbols. In particular is a formula under the MorseLanguage class, made of a combination of . and - symbols. +Semiotics: A and B can be signs if they refers to something else (e.g. a report about a fact, names). + A signal through a cable. A sound wave. Words on a page. The pattern of excited states within a computer RAM. + We call "decoding" the act of recognise the variation according to a particular rule and generate another equivalent schema (e.g. in the agent's cognitive apparatus, as another form of data). +We call "interpreting" the act of providing semantic meaning to data, which is covered by the semiotic perspective. + https://no.wikipedia.org/wiki/Data + + + + + + DynamicMechanicalSpectroscopy + + Dynamic Mechanical Analysis (DMA) is a material characterization technique where a small deformation is applied to a sample in a cyclic manner. This allows measurement of the materials response to stress, temperature, frequency or time. The term is also used to refer to the analyzer that performs the test. + DMA + DynamicMechanicalSpectroscopy + Dynamic Mechanical Analysis (DMA) is a material characterization technique where a small deformation is applied to a sample in a cyclic manner. This allows measurement of the materials response to stress, temperature, frequency or time. The term is also used to refer to the analyzer that performs the test. + + + - T-2 L-1 M+1 I0 Θ0 N0 J0 + T+1 L-3 M0 I+1 Θ0 N0 J0 - PressureUnit - PressureUnit + ElectricChargeDensityUnit + ElectricChargeDensityUnit - - + + + + ScanningProbeMicroscopy + + Scanning probe microscopy (SPM) is a branch of microscopy that forms images of surfaces using a physical probe that scans the specimen. + ScanningProbeMicroscopy + Scanning probe microscopy (SPM) is a branch of microscopy that forms images of surfaces using a physical probe that scans the specimen. + + + + - T0 L0 M-2 I0 Θ0 N0 J0 + T-2 L+2 M+1 I-1 Θ0 N0 J0 - InverseSquareMassUnit - InverseSquareMassUnit + MagneticFluxUnit + MagneticFluxUnit - + - - - AlphaDisintegrationEnergy - Sum of the kinetic energy of the α-particle produced in the disintegration process and the recoil energy of the product atom in a reference frame in which the emitting nucleus is at rest before its disintegration. - AlphaDisintegrationEnergy - http://qudt.org/vocab/quantitykind/AlphaDisintegrationEnergy - https://www.wikidata.org/wiki/Q98146025 - 10-32 - Sum of the kinetic energy of the α-particle produced in the disintegration process and the recoil energy of the product atom in a reference frame in which the emitting nucleus is at rest before its disintegration. + + + KineticFrictionForce + Force opposing the motion of a body sliding on a surface. + DynamicFrictionForce + KineticFrictionForce + https://www.wikidata.org/wiki/Q91005629 + 4-9.4 + Force opposing the motion of a body sliding on a surface. - + + + ResemblanceIcon + An icon that focus on WHERE/WHEN the object is, in the sense of spatial or temporal shape. + An icon that mimics the spatial or temporal shape of the object. + The subclass of icon inspired by Peirceian category a) the image, which depends on a simple quality (e.g. picture). + ResemblanceIcon + An icon that mimics the spatial or temporal shape of the object. + A geographical map that imitates the shape of the landscape and its properties at a specific historical time. + An icon that focus on WHERE/WHEN the object is, in the sense of spatial or temporal shape. + + + - T+2 L+1 M-2 I0 Θ0 N+1 J0 + T0 L+4 M0 I0 Θ0 N0 J0 - AmountPerMassPressureUnit - AmountPerMassPressureUnit - - - - - Subjective - A coded conventional that cannot be univocally determined and depends on an agent (e.g. a human individual, a community) acting as black-box. - The word subjective applies to property intrisically subjective or non-well defined. In general, when an black-box-like procedure is used for the definition of the property. - -This happens due to e.g. the complexity of the object, the lack of a underlying model for the representation of the object, the non-well specified meaning of the property symbols. - -A 'SubjectiveProperty' cannot be used to univocally compare 'Object'-s. - -e.g. you cannot evaluate the beauty of a person on objective basis. - Subjective - A coded conventional that cannot be univocally determined and depends on an agent (e.g. a human individual, a community) acting as black-box. - The beauty of that girl. -The style of your clothing. - - - - - PseudoscalarMeson - A meson with spin zero and odd parity. - PseudoscalarMeson - A meson with spin zero and odd parity. - https://en.wikipedia.org/wiki/Pseudoscalar_meson - - - - - - NonActivePower - For a two-terminal element or a two-terminal circuit under periodic conditions, quantity equal to the square root of the difference of the squares of the apparent power S and the active power P. - NonActivePower - https://qudt.org/vocab/quantitykind/NonActivePower - https://www.wikidata.org/wiki/Q79813060 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-11-43 - 6-61 - For a two-terminal element or a two-terminal circuit under periodic conditions, quantity equal to the square root of the difference of the squares of the apparent power S and the active power P. - - - - - TemporallyRedundant - A whole with temporal parts of its same type. - TemporallyRedundant - A whole with temporal parts of its same type. + QuarticLengthUnit + QuarticLengthUnit - - - - Drilling - machining with a circular cutting movement in which the axis of rotation of the tool and the axis of the internal surface to be produced are identical and the feed movement is in the direction of this axis. The axis of rotation of the cutting movement maintains its position relative to the workpiece independently of the feed movement (axis of rotation workpiece-bound). - Bohren - Drilling + + + + DifferentialStaircasePulseVoltammetry + Differential Pulse Voltammetry in which small potential pulses are superimposed onto a staircase potential ramp. + DifferentialStaircasePulseVoltammetry + Differential Pulse Voltammetry in which small potential pulses are superimposed onto a staircase potential ramp. - + - - StepChronopotentiometry + + HydrodynamicVoltammetry - chronopotentiometry where the applied current is changed in steps - StepChronopotentiometry - chronopotentiometry where the applied current is changed in steps + A linear potential scan, at sufficiently slow scan rates so as to ensure a steady state response, is usually applied. + Mass transport of a redox species enhanced by convection in this way results in a greater electric current. Convective mass transfer occurs up to the diffusion-limiting layer, within which the mass transfer is controlled by diffusion. Electroactive substance depletion outside the diffusion layer is annulled by convective mass transfer, which results in steady- state sigmoidal wave-shaped current-potential curves. + The forced flow can be accomplished by movement either of the solution (solution stirring, or channel flow), or of the electrode (electrode rotation or vibration). + voltammetry with forced flow of the solution towards the electrode surface + HydrodynamicVoltammetry + https://www.wikidata.org/wiki/Q17028237 + voltammetry with forced flow of the solution towards the electrode surface + https://en.wikipedia.org/wiki/Hydrodynamic_voltammetry + https://doi.org/10.1515/pac-2018-0109 - - - Observer - A characteriser that declares a property for an object through the specific interaction required by the property definition. - Observer - A characteriser that declares a property for an object through the specific interaction required by the property definition. + + + + WorkPiece + A WorkPiece is physical artifact, that has a proper shape and occupyes a proper volume intended for subsequent transformation. It is a condensed state, so it is a compact body that is processed or has to be processed. + A solid is defined as a portion of matter that is in a condensed state characterised by resistance to deformation and volume changes. + In manufacturing, a workpiece is a single, delimited part of largely solid material that is processed in some form (e.g. stone ). + In physics, a rigid body (also known as a rigid object[2]) is a solid body in which deformation is zero or so small it can be neglected. The distance between any two given points on a rigid body remains constant in time regardless of external forces or moments exerted on it. A rigid body is usually considered as a continuous distribution of mass. + It has a shape, so we conclude that it is solid + Object that is processed with a machine + Seems to have to be processed through mechanical deformation. So it takes part of a manufacturing process. It is a Manufactured Product and it can be a Commercial Product + The raw material or partially finished piece that is shaped by performing various operations. + They are not powders or threads + a physical artifact, real or virtual, intended for subsequent transformation within some manufacturing operation + fili e polveri non sono compresi + it seems to be an intermediate product, that has to reach the final shape. + it seems to be solid, so it has a proper shape + powder is not workpiece because it has the shape of the recipient containing them + Werkstück + WorkPiece + A WorkPiece is physical artifact, that has a proper shape and occupyes a proper volume intended for subsequent transformation. It is a condensed state, so it is a compact body that is processed or has to be processed. - - - IonAtom - A standalone atom with an unbalanced number of electrons with respect to its atomic number. - The ion_atom is the basic part of a pure ionic bonded compound i.e. without eclectron sharing, - IonAtom - A standalone atom with an unbalanced number of electrons with respect to its atomic number. + + + + + + + + + + + ManufacturedMaterial + A material that is obtained through a manufacturing process. + EngineeredMaterial + ProcessedMaterial + ManufacturedMaterial + A material that is obtained through a manufacturing process. - - - - - - - - - - - CelsiusTemperature - An objective comparative measure of hot or cold. - -Temperature is a relative quantity that can be used to express temperature differences. Unlike ThermodynamicTemperature, it cannot express absolute temperatures. - CelsiusTemperature - http://qudt.org/vocab/quantitykind/CelciusTemperature - 5-2 - An objective comparative measure of hot or cold. + + + BlueDownQuark + BlueDownQuark + -Temperature is a relative quantity that can be used to express temperature differences. Unlike ThermodynamicTemperature, it cannot express absolute temperatures. - https://doi.org/10.1351/goldbook.T06261 + + + AtomisticModel + A physics-based model based on a physics equation describing the behaviour of atoms. + AtomisticModel + A physics-based model based on a physics equation describing the behaviour of atoms. - - + + - T-1 L-1 M+1 I0 Θ0 N0 J0 + T-3 L+2 M0 I0 Θ0 N0 J0 - MassPerLengthTimeUnit - MassPerLengthTimeUnit + AbsorbedDoseRateUnit + AbsorbedDoseRateUnit - + + + + PorcelainOrCeramicCasting + PorcelainOrCeramicCasting + + + + + + FormingFromPulp + FormingFromPulp + + + - - - - - - - - - - EnergyDensityOfStates - Quantity in condensed matter physics. - EnergyDensityOfStates - https://qudt.org/vocab/quantitykind/EnergyDensityOfStates - https://www.wikidata.org/wiki/Q105687031 - 12-16 - Quantity in condensed matter physics. + + + InfiniteMultiplicationFactor + In nuclear physics, the multiplication factor for an infinite medium. + InfiniteMultiplicationFactor + https://qudt.org/vocab/quantitykind/InfiniteMultiplicationFactor + https://www.wikidata.org/wiki/Q99440487 + 10-78.2 + In nuclear physics, the multiplication factor for an infinite medium. - + - - - - - - - - - DensityOfVibrationalStates - quotient of the number of vibrational modes in an infinitesimal interval of angular frequency, and the product of the width of that interval and volume - DensityOfVibrationalStates - https://qudt.org/vocab/quantitykind/DensityOfStates - https://www.wikidata.org/wiki/Q105637294 - 12-12 - quotient of the number of vibrational modes in an infinitesimal interval of angular frequency, and the product of the width of that interval and volume + + HyperfineStructureQuantumNumber + Quantum number of an atom describing the inclination of the nuclear spin with respect to a quantization axis given by the magnetic field produced by the orbital electrons. + HyperfineStructureQuantumNumber + https://qudt.org/vocab/quantitykind/HyperfineStructureQuantumNumber + https://www.wikidata.org/wiki/Q97577449 + 10-13.8 + Quantum number of an atom describing the inclination of the nuclear spin with respect to a quantization axis given by the magnetic field produced by the orbital electrons. - + + - + - - - - - - - + + - UpAntiQuarkType - UpAntiQuarkType + StandardModelParticle + Disjointness comes from the fact that standard model elementary particles are entities that possess objectively distinct and singular characters. + The union of all classes categorising elementary particles according to the Standard Model. + ElementaryParticle + StandardModelParticle + The union of all classes categorising elementary particles according to the Standard Model. + Disjointness comes from the fact that standard model elementary particles are entities that possess objectively distinct and singular characters. + Graviton is included, even if it is an hypothetical particle, to enable causality for gravitational interactions. + This class represents only real particles that are the input and output of a Feynman diagram, and hence respect the E²-p²c²=m²c⁴ energy-momentum equality (on the mass shell). +In the EMMO the virtual particles (off the mass shell), the internal propagators of the interaction within a Feynman diagram, are not represented as mereological entities but as object relations (binary predicates). - - - - - - - - - - - - - - - - - - - - - - - - - - - - Interpreter - The entity (or agent, or observer, or cognitive entity) who connects 'Sign', 'Interpretant' and 'Object'. - The interpreter is not the ontologist, being the ontologist acting outside the ontology at the meta-ontology level. - -On the contrary, the interpreter is an agent recognized by the ontologist. The semiotic branch of the EMMO is the tool used by the ontologist to represent an interpreter's semiotic activity. - Interpreter - The entity (or agent, or observer, or cognitive entity) who connects 'Sign', 'Interpretant' and 'Object'. - For example, the ontologist may be interest in cataloguing in the EMMO how the same object (e.g. a cat) is addressed using different signs (e.g. cat, gatto, chat) by different interpreters (e.g. english, italian or french people). - -The same applies for the results of measurements: the ontologist may be interest to represent in the EMMO how different measurement processes (i.e. semiosis) lead to different quantitative results (i.e. signs) according to different measurement devices (i.e. interpreters). + + + Quantum + A quantum is the EMMO mereological atomistic and causal reductionistic entity. To avoid confusion with the concept of atom coming from physics and to underline the causal reductionistic approach, we will use the expression quantum mereology, instead of atomistic mereology. + A quantum is the most fundamental item (both mereologically and causally) and is considered causally self-connected by definition. +The quantum concept recalls the fact that there is lower epistemological limit to our knowledge of the universe, related to the uncertainity principle. +Space and time emerge following the network of causal connections between quantum objects. So quantum objects are adimensional objects, that precede space and time dimensions: they are simple beings (in greek οντα). +Using physics concepts, we can think the quantum as an elementary particle (e.g. an electron) in a specific state between two causal interactions. + The class of entities without proper parts. + The class of the mereological and causal fundamental entities. + Quantum + A quantum is the most fundamental item (both mereologically and causally) and is considered causally self-connected by definition. +The quantum concept recalls the fact that there is lower epistemological limit to our knowledge of the universe, related to the uncertainity principle. +Space and time emerge following the network of causal connections between quantum objects. So quantum objects are adimensional objects, that precede space and time dimensions: they are simple beings (in greek οντα). +Using physics concepts, we can think the quantum as an elementary particle (e.g. an electron) in a specific state between two causal interactions. + The class of entities without proper parts. + The class of the mereological and causal fundamental entities. + From a physics perspective a quantum can be related to smallest identifiable entities, according to the limits imposed by the uncertainty principle in space and time measurements. +However, the quantum mereotopology approach is not restricted only to physics. For example, in a manpower management ontology, a quantum can stand for an hour (time) of a worker (space) activity. + A quantum is the EMMO mereological atomistic and causal reductionistic entity. To avoid confusion with the concept of atom coming from physics and to underline the causal reductionistic approach, we will use the expression quantum mereology, instead of atomistic mereology. - + - - ThermochemicalTesting + + XrdGrazingIncidence - Thermomechanical analysis (TMA) is a technique used in thermal analysis, a branch of materials science which studies the properties of materials as they change with temperature. - TMA - ThermochemicalTesting - Thermomechanical analysis (TMA) is a technique used in thermal analysis, a branch of materials science which studies the properties of materials as they change with temperature. - - - - - - - RelativeMassFractionOfVapour - RelativeMassFractionOfVapour - 5-35 + XrdGrazingIncidence - + - - - - RelativeHumidity - Ratio of the partial pressure p of water vapour in moist air to its partial pressure psat at saturation, at the same temperature φ = p/psat. - The relative humidity is often expressed in per cent. - RelativeHumidity - https://qudt.org/vocab/quantitykind/RelativeHumidity - https://www.wikidata.org/wiki/Q2499617 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-65 - 5-33 - Ratio of the partial pressure p of water vapour in moist air to its partial pressure psat at saturation, at the same temperature φ = p/psat. - https://en.wikipedia.org/wiki/Humidity#Relative_humidity + + Height + Minimum length of a straight line segment between a point and a reference line or reference surface. + Height + https://qudt.org/vocab/quantitykind/Height + https://www.wikidata.org/wiki/Q208826 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-01-21 + https://dbpedia.org/page/Height + 3-1.3 + Minimum length of a straight line segment between a point and a reference line or reference surface. + https://en.wikipedia.org/wiki/Height - + - - - RelativeMassConcentrationOfWaterVapour - For normal cases, the relative humidity may be assumed to be equal to relative mass concentration of vapour. - ratio of the mass concentration of water vapour v to its mass concentration at saturation vsat, at the same temperature, thus ψ = v/vsat. - RelativeMassConcentrationOfWaterVapour - https://qudt.org/vocab/quantitykind/RelativeMassConcentrationOfVapour - https://www.wikidata.org/wiki/Q76379357 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-66 - ratio of the mass concentration of water vapour v to its mass concentration at saturation vsat, at the same temperature, thus ψ = v/vsat. + + + Spin + Vector quantity expressing the internal angular momentum of a particle or a particle system. + Spin + https://qudt.org/vocab/quantitykind/Spin + https://www.wikidata.org/wiki/Q133673 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-05-09 + 10-10 + Vector quantity expressing the internal angular momentum of a particle or a particle system. - + - - - MaximumEfficiency - Efficiency of an ideal heat engine operating according to the Carnot process. - CarnotEfficiency - MaximumEfficiency - https://www.wikidata.org/wiki/Q93949862 - 5-25.2 - Efficiency of an ideal heat engine operating according to the Carnot process. + + + DebyeAngularWaveNumber + Cut-off angular wavenumber in the Debye model of the vibrational spectrum of a solid. + DebyeAngluarRepetency + DebyeAngularWaveNumber + https://qudt.org/vocab/quantitykind/DebyeAngularWavenumber + https://www.wikidata.org/wiki/Q105554370 + 12-9.3 + Cut-off angular wavenumber in the Debye model of the vibrational spectrum of a solid. - + - - - IntrinsicCarrierDensity - Square root of the product of electron and hole density in a semiconductor. - IntrinsicCarrierDensity - https://qudt.org/vocab/quantitykind/IntinsicCarrierDensity - https://www.wikidata.org/wiki/Q1303188 - 12-29.3 - Square root of the product of electron and hole density in a semiconductor. + + + + + + + + LuminousFlux + Perceived power of light. + LuminousFlux + http://qudt.org/vocab/quantitykind/LuminousFlux + 7-13 + Perceived power of light. + https://doi.org/10.1351/goldbook.L03646 - - - CompositeMaterial - CompositeMaterial + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Gluon + The class of individuals that stand for gluons elementary particles. + Gluon + The class of individuals that stand for gluons elementary particles. + https://en.wikipedia.org/wiki/Gluon - - + + + - + - + - + - + - + - - + + + + + + + + + + + + @@ -15238,534 +14497,468 @@ The same applies for the results of measurements: the ontologist may be interest - RedQuark - RedQuark + Suspension + An heterogeneous mixture that contains coarsly dispersed particles (no Tyndall effect), that generally tend to separate in time to the dispersion medium phase. + Suspensions show no significant effect on light. + Suspension + An heterogeneous mixture that contains coarsly dispersed particles (no Tyndall effect), that generally tend to separate in time to the dispersion medium phase. - - - - - LandeFactor - Quotient of the magnetic dipole moment of an atom, and the product of the total angular momentum quantum number and the Bohr magneton. - GFactorOfAtom - LandeFactor - https://qudt.org/vocab/quantitykind/LandeGFactor - https://www.wikidata.org/wiki/Q1191684 - 10-14.1 - Quotient of the magnetic dipole moment of an atom, and the product of the total angular momentum quantum number and the Bohr magneton. + + + + + + + + + + PhaseHeterogeneousMixture + A mixture in which more than one phases of matter cohexists. + Phase heterogenous mixture may share the same state of matter. + +For example, immiscibile liquid phases (e.g. oil and water) constitute a mixture whose phases are clearly separated but share the same state of matter. + PhaseHeterogeneousMixture + A mixture in which more than one phases of matter cohexists. + Phase heterogenous mixture may share the same state of matter. + +For example, immiscibile liquid phases (e.g. oil and water) constitute a mixture whose phases are clearly separated but share the same state of matter. - - - - SamplePreparationInstrument - - SamplePreparationInstrument + + + + + StaticFrictionForce + StaticFriction + StaticFrictionForce + https://qudt.org/vocab/quantitykind/StaticFriction + https://www.wikidata.org/wiki/Q90862568 + 4-9.3 - - - - Organisation - An holistic system of people that has its own functions with responsibilities, authorities and relationships to achieve its objectives. - ISO 55000:2014 -organization: person or group of people that has its own functions with responsibilities, authorities and relationships to achieve its objectives - Organisation - An holistic system of people that has its own functions with responsibilities, authorities and relationships to achieve its objectives. + + + + ModulusOfImpedance + ModulusOfImpedance + https://qudt.org/vocab/quantitykind/ModulusOfImpedance + https://www.wikidata.org/wiki/Q25457909 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-44 + 6-51.4 - - - - DifferentialOperator - DifferentialOperator + + + + TotalCurrentDensity + Sum of electric current density and displacement current density. + TotalCurrentDensity + https://qudt.org/vocab/quantitykind/TotalCurrentDensity + https://www.wikidata.org/wiki/Q77680811 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-44 + 6-20 + Sum of electric current density and displacement current density. - + - + - - RichardsonConstant - Parameter in the expression for the thermionic emission current density J for a metal in terms of the thermodynamic temperature T and work function. - RichardsonConstant - https://qudt.org/vocab/quantitykind/RichardsonConstant - https://www.wikidata.org/wiki/Q105883079 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-06-30 - 12-26 - Parameter in the expression for the thermionic emission current density J for a metal in terms of the thermodynamic temperature T and work function. + + ExtentOfReaction + Difference between equilibrium and initial amount of a substance, divided by its stoichiometric number. + ExtentOfReaction + https://qudt.org/vocab/quantitykind/ExtentOfReaction + https://www.wikidata.org/wiki/Q899046 + 9-31 + Difference between equilibrium and initial amount of a substance, divided by its stoichiometric number. + https://doi.org/10.1351/goldbook.E02283 - + - - - ThermoelectricVoltage - Voltage between substances a and b caused by the thermoelectric effect. - ThermoelectricVoltage - https://www.wikidata.org/wiki/Q105761637 - 12-20 - Voltage between substances a and b caused by the thermoelectric effect. + + + + + T0 L+1 M0 I0 Θ0 N0 J0 + + + LengthUnit + LengthUnit - - + + + + 3DPrinting + fabrication of objects through the deposition of a material using a print head, nozzle or another printer technology +Note 1 to entry: This term is often used in a non-technical context synonymously with additive manufacturing (3.1.2) and, in these cases, typically associated with machines used for non-industrial purposes including personal use. + Fabrication of objects through the deposition of a material using a print head, nozzle or another printer technology. + This term is often used in a non-technical context synonymously with additive manufacturing and, in these cases, typically associated with machines used for non-industrial purposes including personal use. + 3DPrinting + Fabrication of objects through the deposition of a material using a print head, nozzle or another printer technology. + This term is often used in a non-technical context synonymously with additive manufacturing and, in these cases, typically associated with machines used for non-industrial purposes including personal use. + + + + + + + + + T-2 L+1 M0 I0 Θ0 N0 J0 + + + AccelerationUnit + AccelerationUnit + + + + - - + + - - - TotalMassStoppingPower - Quotient of the total linear stopping power S and the mass density ρ of the material. - MassStoppingPower - TotalMassStoppingPower - https://qudt.org/vocab/quantitykind/TotalMassStoppingPower - https://www.wikidata.org/wiki/Q98642795 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-12-52 - 10-55 - Quotient of the total linear stopping power S and the mass density ρ of the material. + + Existent + 'Existent' is the EMMO class to be used for representing real world physical objects under a reductionistic perspective (i.e. objects come from the composition of sub-part objects, both in time and space). + +'Existent' class collects all individuals that stand for physical objects that can be structured in well defined temporal sub-parts called states, through the temporal direct parthood relation. + +This class provides a first granularity hierarchy in time, and a way to axiomatize tessellation principles for a specific whole with a non-transitivity relation (direct parthood) that helps to retain the granularity levels. + +e.g. a car, a supersaturated gas with nucleating nanoparticles, an atom that becomes ionized and then recombines with an electron. + A 'Physical' which is a tessellation of 'State' temporal direct parts. + An 'Existent' individual stands for a real world object for which the ontologist wants to provide univocal tessellation in time. + +By definition, the tiles are represented by 'State'-s individual. + +Tiles are related to the 'Existent' through temporal direct parthood, enforcing non-transitivity and inverse-functionality. + Being hasTemporalDirectPart a proper parthood relation, there cannot be 'Existent' made of a single 'State'. + +Moreover, due to inverse functionality, a 'State' can be part of only one 'Existent', preventing overlapping between 'Existent'-s. + true + Existent + A 'Physical' which is a tessellation of 'State' temporal direct parts. - - - - - HelmholtzEnergy - HelmholtzFreeEnergy - HelmholtzEnergy - https://www.wikidata.org/wiki/Q865821 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-24 - 5-20.4 - https://doi.org/10.1351/goldbook.H02772 + + + + ArchetypeManufacturing + A manufacturing in which the product is a solid body with a well defined geometrical shape made from shapeless original material parts, whose cohesion is created during the process. + DIN 8580:2020 + Urformen + PrimitiveForming + ArchetypeManufacturing + A manufacturing in which the product is a solid body with a well defined geometrical shape made from shapeless original material parts, whose cohesion is created during the process. - + - + - + - ElementaryParticle - A chausal chain whose quantum parts are of the same standard model fundamental type. - An elementary particle is a causal chain of quantum entities of the same type. For example, an elementary electron is a sequence of fundamental electrons only. - SingleParticleChain - ElementaryParticle - An elementary particle is a causal chain of quantum entities of the same type. For example, an elementary electron is a sequence of fundamental electrons only. - A chausal chain whose quantum parts are of the same standard model fundamental type. + WBoson + A charged vector boson that mediate the weak interaction. + ChargedWeakBoson + IntermediateVectorBoson + WBoson + A charged vector boson that mediate the weak interaction. + https://en.wikipedia.org/wiki/W_and_Z_bosons - + - - - GibbsEnergy - Type of thermodynamic potential; useful for calculating reversible work in certain systems. - GibbsFreeEnergy - GibbsEnergy - https://www.wikidata.org/wiki/Q334631 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-23 - 5-20.5 - Type of thermodynamic potential; useful for calculating reversible work in certain systems. - https://doi.org/10.1351/goldbook.G02629 + + + StandardAmountConcentration + Chosen value of amount concentration, usually equal to 1 mol dm−3. + StandardConcentration + StandardMolarConcentration + StandardAmountConcentration + https://www.wikidata.org/wiki/Q88871689 + Chosen value of amount concentration, usually equal to 1 mol dm−3. + 9-12.2 + https://doi.org/10.1351/goldbook.S05909 - + - - - - - - - - - - - - - - - - - FundamentalBoson - A boson that is a single elementary particle. - A particle with integer spin that follows Bose–Einstein statistics. - FundamentalBoson - A particle with integer spin that follows Bose–Einstein statistics. - A boson that is a single elementary particle. - https://en.wikipedia.org/wiki/Boson#Elementary_bosons + AntiTau + AntiTau - + + + + Cleaning + Process for removing unwanted residual or waste material from a given product or material + Cleaning + + + - + - - ParticleFluenceRate - Differential quotient of fluence Φ with respect to time. - ParticleFluenceRate - https://qudt.org/vocab/quantitykind/ParticleFluenceRate - https://www.wikidata.org/wiki/Q98497410 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-16 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-04-19 - 10-44 - Differential quotient of fluence Φ with respect to time. - - - - - - StyleSheetLanguage - A computer language that expresses the presentation of structured documents. - StyleSheetLanguage - A computer language that expresses the presentation of structured documents. - CSS - https://en.wikipedia.org/wiki/Style_sheet_language - - - - - - PhaseSpeedOfElectromagneticWaves - Angular frequency divided by angular wavenumber. - PhaseSpeedOfElectromagneticWaves - https://qudt.org/vocab/quantitykind/ElectromagneticWavePhaseSpeed - https://www.wikidata.org/wiki/Q77990619 - 6-35.1 - Angular frequency divided by angular wavenumber. - - - - - - - - - - - - - - - - - - - - - - - Cognition - IconSemiosis - Cognition - - - - - - AnalyticalElectronMicroscopy - - Analytical electron microscopy (AEM) refers to the collection of spectroscopic data in TEM or STEM, enabling qualitative or quantitative compositional analysis. - AnalyticalElectronMicroscopy - Analytical electron microscopy (AEM) refers to the collection of spectroscopic data in TEM or STEM, enabling qualitative or quantitative compositional analysis. + MagneticFlux + Measure of magnetism, taking account of the strength and the extent of a magnetic field. + MagneticFlux + http://qudt.org/vocab/quantitykind/MagneticFlux + https://www.wikidata.org/wiki/Q177831 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-21 + https://dbpedia.org/page/Magnetic_flux + 6-22.1 + Measure of magnetism, taking account of the strength and the extent of a magnetic field. + https://en.wikipedia.org/wiki/Magnetic_flux + https://doi.org/10.1351/goldbook.M03684 - - - + + + - - - T+2 L+1 M-1 I0 Θ+1 N0 J0 - + + + + + + - TemperaturePerPressureUnit - TemperaturePerPressureUnit - - - - - TemporallyFundamental - The class of individuals that satisfy a whole defining criteria (i.e. belongs to a subclass of whole) and have no temporal parts that satisfy that same criteria (no parts that are of the same type of the whole). - TemporallyFundamental - The class of individuals that satisfy a whole defining criteria (i.e. belongs to a subclass of whole) and have no temporal parts that satisfy that same criteria (no parts that are of the same type of the whole). - - - - - - Spray - A suspension of liquid droplets dispersed in a gas through an atomization process. - Spray - A suspension of liquid droplets dispersed in a gas through an atomization process. - + Holistic + A perspective characterized by the belief that some mereological parts of a whole (holistic parts) are intimately interconnected and explicable only by reference to the whole and vice versa. + An holistic perspective considers each part of the whole as equally important, without the need to position the parts within a hierarchy (in time or space). The interest is on the whole object and on its parts (how they contribute to the whole, i.e. their roles), without going further into specifying the spatial hierarchy or the temporal position of each part. - - - - Array - Array subclasses with a specific shape can be constructed with cardinality restrictions. +This class allows the picking of parts without necessarily going trough a rigid hierarchy of spatial compositions (e.g. body -> organ -> cell -> molecule) or temporal composition. This is inline with the transitive nature of parthood, as it is usually defined in literature. -See Shape4x3Matrix as an example. - Arrays are ordered mathematical objects who's elementary spatial parts are numbers. Their dimensionality is constructed with spatial direct parthood, where 1-dimensional arrays have spatial direct parts Number and n-dimensional array have spatial direct parts (n-1)-dimensional arrays. - Arrays are ordered objects, since they are a subclasses of Arrangement. - Array - Arrays are ordered mathematical objects who's elementary spatial parts are numbers. Their dimensionality is constructed with spatial direct parthood, where 1-dimensional arrays have spatial direct parts Number and n-dimensional array have spatial direct parts (n-1)-dimensional arrays. - A Vector is a 1-dimensional Array with Number as spatial direct parts, -a Matrix is a 2-dimensional Array with Vector as spatial direct parts, -an Array3D is a 3-dimensional Array with Matrix as spatial direct parts, -and so forth... - +The holistic perspective is not excluding the reductionistic perspective, on the contrary it can be considered its complement. + The union of classes whole and part. + Wholistic + Holistic + An holistic perspective considers each part of the whole as equally important, without the need to position the parts within a hierarchy (in time or space). The interest is on the whole object and on its parts (how they contribute to the whole, i.e. their roles), without going further into specifying the spatial hierarchy or the temporal position of each part. - - - ProcessingReproducibility - - Description of performed statistical analysis to check for data reproducibility (e.g. easily reproducible for everyone, reproducible for a domain expert, reproducible only for Data processing Expert) - ProcessingReproducibility - Description of performed statistical analysis to check for data reproducibility (e.g. easily reproducible for everyone, reproducible for a domain expert, reproducible only for Data processing Expert) - +This class allows the picking of parts without necessarily going trough a rigid hierarchy of spatial compositions (e.g. body -> organ -> cell -> molecule) or temporal composition. This is inline with the transitive nature of parthood, as it is usually defined in literature. - - - - - - - T-3 L+4 M+1 I0 Θ0 N0 J0 - - - PowerAreaUnit - PowerAreaUnit +The holistic perspective is not excluding the reductionistic perspective, on the contrary it can be considered its complement. + The union of classes whole and part. + A perspective characterized by the belief that some mereological parts of a whole (holistic parts) are intimately interconnected and explicable only by reference to the whole and vice versa. + A molecule of a body can have role in the body evolution, without caring if its part of a specific organ and without specifying the time interval in which this role occurred. + A product is a role that can be fulfilled by many objects, but always requires a process to which the product participates and from which it is generated. - + - - PhotoluminescenceMicroscopy - - Photoluminescence spectroscopy is a widely used technique for characterisation of the optical and electronic properties of semiconductors and molecules. - PhotoluminescenceMicroscopy - Photoluminescence spectroscopy is a widely used technique for characterisation of the optical and electronic properties of semiconductors and molecules. + + CharacterisationSoftware + A software application to process characterisation data + CharacterisationSoftware + A software application to process characterisation data + In Nanoindentation post-processing the software used to apply the Oliver-Pharr to calculate the characterisation properties (i.e. elastic modulus, hardness) from load and depth data. - - - - - NeutronYieldPerFission - Average number of fission neutrons, both prompt and delayed, emitted per fission event. - NeutronYieldPerFission - https://qudt.org/vocab/quantitykind/NeutronYieldPerFission - https://www.wikidata.org/wiki/Q99157909 - 10-74.1 - Average number of fission neutrons, both prompt and delayed, emitted per fission event. + + + + CharacterisationExperiment + A characterisation experiment is the process by which a material's structure and properties are probed and measured. It is a fundamental process in the field of materials science, without which no scientific understanding of engineering materials could be ascertained. + A characterisation experiment is the process by which a material's structure and properties are probed and measured. It is a fundamental process in the field of materials science, without which no scientific understanding of engineering materials could be ascertained. + CharacterisationExperiment + A characterisation experiment is the process by which a material's structure and properties are probed and measured. It is a fundamental process in the field of materials science, without which no scientific understanding of engineering materials could be ascertained. - + - - DataBasedSimulationSoftware - A computational application that uses existing data to predict the behaviour of a system without providing a identifiable analogy with the original object. - DataBasedSimulationSoftware - A computational application that uses existing data to predict the behaviour of a system without providing a identifiable analogy with the original object. - - - - - Muon - The class of individuals that stand for muon elementary particles belonging to the second generation of leptons. - Muon - The class of individuals that stand for muon elementary particles belonging to the second generation of leptons. - https://en.wikipedia.org/wiki/Muon + + + + + + + + Experiment + An experiment is a process that is intended to replicate a physical phenomenon in a controlled environment. + Experiment + An experiment is a process that is intended to replicate a physical phenomenon in a controlled environment. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Gluon - The class of individuals that stand for gluons elementary particles. - Gluon - The class of individuals that stand for gluons elementary particles. - https://en.wikipedia.org/wiki/Gluon + + + + + ResonanceEnergy + Resonance in a nuclear reaction, determined by the kinetic energy of an incident particle in the reference frame of the target particle. + ResonanceEnergy + https://qudt.org/vocab/quantitykind/ResonanceEnergy + https://www.wikidata.org/wiki/Q98165187 + 10-37.2 + Resonance in a nuclear reaction, determined by the kinetic energy of an incident particle in the reference frame of the target particle. - + - - - - - T0 L-2 M0 I0 Θ0 N+1 J0 - - - AmountPerAreaUnit - AmountPerAreaUnit + + + ShearStrain + Displacement of one surface with respect to another divided by the distance between them. + ShearStrain + https://qudt.org/vocab/quantitykind/ShearStrain + https://www.wikidata.org/wiki/Q7561704 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-59 + 4-17.3 + Displacement of one surface with respect to another divided by the distance between them. + https://doi.org/10.1351/goldbook.S05637 - + - T-1 L0 M0 I0 Θ+1 N0 J0 + T0 L0 M+1 I0 Θ+1 N0 J0 - TemperaturePerTimeUnit - TemperaturePerTimeUnit - - - - - - ShearForming - Forming of a solid body, whereby the plastic state is essentially brought about by shear stress. - Schubumformen - ShearForming + MassTemperatureUnit + MassTemperatureUnit - - - - - IonTransportNumber - Faction of electrical current carried by given ionic species. - CurrentFraction - TransferrenceNumber - IonTransportNumber - https://qudt.org/vocab/quantitykind/IonTransportNumber - https://www.wikidata.org/wiki/Q331854 - 9-46 - Faction of electrical current carried by given ionic species. - https://doi.org/10.1351/goldbook.I03181 - https://doi.org/10.1351/goldbook.T06489 + + + + LinearChronopotentiometry + + chronopotentiometry where the applied current is changed linearly + LinearChronopotentiometry + chronopotentiometry where the applied current is changed linearly - + - + - ParticleFluence - Differential quotient of N with respect to a, where N is the number of particles incident on a sphere of cross-sectional area a. - ParticleFluence - https://qudt.org/vocab/quantitykind/ParticleFluence - https://www.wikidata.org/wiki/Q82965908 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-15 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-04-18 - 10-43 - Differential quotient of N with respect to a, where N is the number of particles incident on a sphere of cross-sectional area a. + DecayConstant + Disintegrations per unit time dN/dt for an atomic nucleus divided by the number of nuclei N existing at the same time t. + DisintegrationConstant + DecayConstant + https://qudt.org/vocab/quantitykind/DecayConstant + https://www.wikidata.org/wiki/Q11477200 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-11 + 10-24 + Disintegrations per unit time dN/dt for an atomic nucleus divided by the number of nuclei N existing at the same time t. + https://doi.org/10.1351/goldbook.D01538 - - - BlueBottomQuark - BlueBottomQuark + + + + InspectionDevice + InspectionDevice - - - + + + + - - - - - - + + T-1 L-1 M+1 I0 Θ0 N0 J0 + + + MassPerLengthTimeUnit + MassPerLengthTimeUnit + + + + + + MeasurementDataPostProcessing + + Application of a post-processing model to signals through a software, in order to calculate the final characterisation property. + MeasurementDataPostProcessing + Application of a post-processing model to signals through a software, in order to calculate the final characterisation property. + Analysis of SEM (or optical) images to gain additional information (image filtering/integration/averaging, microstructural analysis, grain size evaluation, Digital Image Correlation procedures, etc.) + In nanoindentation testing, this is the Oliver-Pharr method, which allows calculating the elastic modulus and hardness of the sample by using the load and depth measured signals. + + + + + + + + + T0 L0 M0 I0 Θ0 N+1 J0 - - - - - - - - - - SemioticEntity - Semiotic subclasse are defined using Peirce's semiotic theory. + AmountUnit + AmountUnit + -"Namely, a sign is something, A, which brings something, B, its interpretant sign determined or created by it, into the same sort of correspondence with something, C, its object, as that in which itself stands to C." (Peirce 1902, NEM 4, 20–21). + + + + ProgrammingLanguage + A language object that follows syntactic rules of a programming language. + A programming language object can also be a fragment (e.g. a C function) not suitable for exectution. + Code + SoftwareCode + ProgrammingLanguage + A language object that follows syntactic rules of a programming language. + A programming language object can also be a fragment (e.g. a C function) not suitable for exectution. + Entities are not necessarily digital data, but can be code fragments printed on paper. + -The triadic elements: -- 'sign': the sign A (e.g. a name) -- 'interpretant': the sign B as the effects of the sign A on the interpreter (e.g. the mental concept of what a name means) -- 'object': the object C (e.g. the entity to which the sign A and B refer to) + + + + + DiffusionLength + In condensed matter physics, the square root of the product of diffusion coefficient and lifetime. + DiffusionLength + https://qudt.org/vocab/quantitykind/SolidStateDiffusionLength + https://www.wikidata.org/wiki/Q106097176 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=521-02-60 + 12-33 + In condensed matter physics, the square root of the product of diffusion coefficient and lifetime. + -This class includes also the 'interpeter' i.e. the entity that connects the 'sign' to the 'object' - The class of individuals that stands for semiotic objects, i.e. objects that take part on a semiotic process. - SemioticEntity - The class of individuals that stands for semiotic objects, i.e. objects that take part on a semiotic process. + + + + XpsVariableKinetic + X-ray photoelectron spectroscopy (XPS), also known as ESCA (electron spectroscopy for chemical analysis) is a surface analysis technique which provides both elemental and chemical state information virtually without restriction on the type of material which can be analysed. It is a relatively simple technique where the sample is illuminated with X-rays which have enough energy to eject an electron from the atom. These ejected electrons are known as photoelectrons. The kinetic energy of these emitted electrons is characteristic of the element from which the photoelectron originated. The position and intensity of the peaks in an energy spectrum provide the desired chemical state and quantitative information. The surface sensitivity of XPS is determined by the distance that that photoelectron can travel through the material without losing any kinteic energy. These elastiaclly scattered photoelectrons contribute to the photoelectron peak, whilst photoelectrons that have been inelastically scattered, losing some kinetic energy before leaving the material, will contribute to the spectral background. + Electron spectroscopy for chemical analysis (ESCA) + X-ray photoelectron spectroscopy (XPS) + XpsVariableKinetic + X-ray photoelectron spectroscopy (XPS), also known as ESCA (electron spectroscopy for chemical analysis) is a surface analysis technique which provides both elemental and chemical state information virtually without restriction on the type of material which can be analysed. It is a relatively simple technique where the sample is illuminated with X-rays which have enough energy to eject an electron from the atom. These ejected electrons are known as photoelectrons. The kinetic energy of these emitted electrons is characteristic of the element from which the photoelectron originated. The position and intensity of the peaks in an energy spectrum provide the desired chemical state and quantitative information. The surface sensitivity of XPS is determined by the distance that that photoelectron can travel through the material without losing any kinteic energy. These elastiaclly scattered photoelectrons contribute to the photoelectron peak, whilst photoelectrons that have been inelastically scattered, losing some kinetic energy before leaving the material, will contribute to the spectral background. @@ -15789,418 +14982,405 @@ This class includes also the 'interpeter' i.e. the entity that connects the 'sig Spectroscopic techniques are numerous and varied, but all involve measuring the response of a material to different frequencies of electromagnetic radiation. Depending on the technique used, material characterization may be based on the absorption, emission, impedance, or reflection of incident energy by a sample. - - - - SolidSolidSuspension - A coarse dispersion of solid in a solid continuum phase. - SolidSolidSuspension - A coarse dispersion of solid in a solid continuum phase. - Granite, sand, dried concrete. + + + ElementaryBoson + ElementaryBoson - + + + RedStrangeQuark + RedStrangeQuark + + + - - CyclicChronopotentiometry + + ShearOrTorsionTesting - chronopotentiometry where the change in applied current undergoes a cyclic current reversal - CyclicChronopotentiometry - chronopotentiometry where the change in applied current undergoes a cyclic current reversal + ShearOrTorsionTesting - - - - Numeral - Numeral + + + + Flanging + Flanging - + - - - LarmonAngularFrequency - Angular frequency of the electron angular momentum vector precession about the axis of an external magnetic field. - LarmonAngularFrequency - 10-15.1 - Angular frequency of the electron angular momentum vector precession about the axis of an external magnetic field. + + + MechanicalEfficiency + Quotient of mechanical output and input power. + MechanicalEfficiency + https://www.wikidata.org/wiki/Q2628085 + 4-29 + Quotient of mechanical output and input power. - - - - AngularFrequency - Rate of change of the phase angle. - AngularFrequency - https://qudt.org/vocab/quantitykind/AngularFrequency - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-07-03 - https://dbpedia.org/page/Angular_frequency - 3-18 - Rate of change of the phase angle. - https://en.wikipedia.org/wiki/Angular_frequency - https://doi.org/10.1351/goldbook.A00352 + + + MuonAntiNeutrino + MuonAntiNeutrino - - - - - - - - - - - - - - - - - - - - - - UnitSymbol - A symbol that stands for a single unit. - UnitSymbol - A symbol that stands for a single unit. - Some examples are "Pa", "m" and "J". + + + + NuclearSpinQuantumNumber + Quantum number related to the total angular momentum, J, of a nucleus in any specified state, normally called nuclear spin. + NuclearSpinQuantumNumber + https://qudt.org/vocab/quantitykind/NuclearSpinQuantumNumber + https://www.wikidata.org/wiki/Q97577403 + 10-13.7 + Quantum number related to the total angular momentum, J, of a nucleus in any specified state, normally called nuclear spin. - + - - - Lethargy - Natural logarithm of the quotient of a reference energy and the kinetic energy of a neutron. - Lethargy - https://qudt.org/vocab/quantitykind/Lethargy - https://www.wikidata.org/wiki/Q25508781 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-07-01 - 10-69 - Natural logarithm of the quotient of a reference energy and the kinetic energy of a neutron. + + ElectricImpedance + Measure of the opposition that a circuit presents to a current when a voltage is applied. + Impedance + ElectricImpedance + http://qudt.org/vocab/quantitykind/Impedance + https://www.wikidata.org/wiki/Q179043 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-43 + 6-51.1 + https://en.wikipedia.org/wiki/Electrical_impedance - - - - HardeningByRolling - Strengthening by rolling is the strengthening of component surfaces by mechanically generating compressive stresses in the component surface and consolidating the material. - VerfestigendurchWalzen - HardeningByRolling - Strengthening by rolling is the strengthening of component surfaces by mechanically generating compressive stresses in the component surface and consolidating the material. + + + + DirectCoulometryAtControlledPotential + + Direct coulometry at controlled potential is usually carried out in convective mass trans- fer mode using a large surface working electrode. Reference and auxiliary electrodes are placed in separate compartments. The total electric charge is obtained by integration of the I–t curve or can be measured directly using a coulometer. + In principle, the end point at which I = 0, i.e. when the concentration of species under study becomes zero, can be reached only at infinite time. However, in practice, the electrolysis is stopped when the current has decayed to a few percent of the initial value and the charge passed at infinite time is calculated from a plot of charge Q(t) against time t. For a simple system under diffusion control Qt= Q∞[1 − exp(−DAt/Vδ)], where Q∞ = limt→∞Q(t) is the total charge passed at infinite time, D is the diffusion coefficient of the electroactive species, A the electrode area, δ the diffusion layer thickness, and V the volume of the solution. + coulometry at a preselected constant potential of the working electrode + DirectCoulometryAtControlledPotential + coulometry at a preselected constant potential of the working electrode + https://doi.org/10.1515/pac-2018-0109 - - - - HardeningByForming - Verfestigen durch Umformen - HardeningByForming + + + + Plasma + A fluid in which a gas is ionized to a level where its electrical conductivity allows long-range electric and magnetic fields to dominate its behaviour. + Plasma + A fluid in which a gas is ionized to a level where its electrical conductivity allows long-range electric and magnetic fields to dominate its behaviour. - - - - IsobaricHeatCapacity - Heat capacity at constant pressure. - HeatCapacityAtConstantPressure - IsobaricHeatCapacity - https://www.wikidata.org/wiki/Q112187490 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-49 - 5-16.2 - Heat capacity at constant pressure. + + + + BondedAtom + A real bond between atoms is always something hybrid between covalent, metallic and ionic. + +In general, metallic and ionic bonds have atoms sharing electrons. + An bonded atom that shares at least one electron to the atom-based entity of which is part of. + The bond types that are covered by this definition are the strong electonic bonds: covalent, metallic and ionic. + This class can be used to represent molecules as simplified quantum systems, in which outer molecule shared electrons are un-entangled with the inner shells of the atoms composing the molecule. + BondedAtom + An bonded atom that shares at least one electron to the atom-based entity of which is part of. + + + + + + SolidSolidSuspension + A coarse dispersion of solid in a solid continuum phase. + SolidSolidSuspension + A coarse dispersion of solid in a solid continuum phase. + Granite, sand, dried concrete. + + + + + + DifferentialThermalAnalysis + Differential thermal analysis (DTA) is a thermoanalytic technique that is similar to differential scanning calorimetry. In DTA, the material under study and an inert reference are made to undergo identical thermal cycles, (i.e., same cooling or heating programme) while recording any temperature difference between sample and reference.[1] This differential temperature is then plotted against time, or against temperature (DTA curve, or thermogram). Changes in the sample, either exothermic or endothermic, can be detected relative to the inert reference. Thus, a DTA curve provides data on the transformations that have occurred, such as glass transitions, crystallization, melting and sublimation. The area under a DTA peak is the enthalpy change and is not affected by the heat capacity of the sample. + DTA + DifferentialThermalAnalysis + Differential thermal analysis (DTA) is a thermoanalytic technique that is similar to differential scanning calorimetry. In DTA, the material under study and an inert reference are made to undergo identical thermal cycles, (i.e., same cooling or heating programme) while recording any temperature difference between sample and reference.[1] This differential temperature is then plotted against time, or against temperature (DTA curve, or thermogram). Changes in the sample, either exothermic or endothermic, can be detected relative to the inert reference. Thus, a DTA curve provides data on the transformations that have occurred, such as glass transitions, crystallization, melting and sublimation. The area under a DTA peak is the enthalpy change and is not affected by the heat capacity of the sample. - + + + BaseQuantity + "Quantity in a conventionally chosen subset of a given system of quantities, where no quantity in the subset can be expressed in terms of the other quantities within that subset" +ISO 80000-1 + BaseQuantity + "Quantity in a conventionally chosen subset of a given system of quantities, where no quantity in the subset can be expressed in terms of the other quantities within that subset" +ISO 80000-1 + base quantity + + + - + + - - ElectricFieldStrength - Vector field quantity E which exerts on any charged particle at rest a force F equal to the product of E and the electric charge Q of the particle. - ElectricFieldStrength - https://qudt.org/vocab/quantitykind/ElectricFieldStrength - https://www.wikidata.org/wiki/Q20989 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-18 - 6-10 - Vector field quantity E which exerts on any charged particle at rest a force F equal to the product of E and the electric charge Q of the particle. + Momentum + Product of mass and velocity. + Momentum + http://qudt.org/vocab/quantitykind/Momentum + 4-8 + https://doi.org/10.1351/goldbook.M04007 - + + + + Porosimetry + + Porosimetry + + + - SystemProgram - System program refers to operating systems and utility programs that manage computer resources at a low level enabling a computer to function. - SystemProgram - System program refers to operating systems and utility programs that manage computer resources at a low level enabling a computer to function. - An operating system. A graphic driver. + + SourceCode + A programming language entity expressing a formal detailed plan of what a software is intended to do. + A source code is the companion of an application, being it the entity used to generate the application list of CPU executable instructions. + SourceCode + A programming language entity expressing a formal detailed plan of what a software is intended to do. + A source code is the companion of an application, being it the entity used to generate the application list of CPU executable instructions. + Source code (also referred to as source or code) is the version of software as it is originally written (i.e., typed into a computer) by a human in plain text (i.e., human readable alphanumeric characters). - + + + + Filling + Filling + + + - - - MigrationLength - Square root of the migration area, M^2. - MigrationLength - https://qudt.org/vocab/quantitykind/MigrationLength - https://www.wikidata.org/wiki/Q98998318 - 10-73.3 - Square root of the migration area, M^2. + + + + + T0 L+3 M0 I0 Θ0 N-1 J0 + + + VolumePerAmountUnit + VolumePerAmountUnit - + - - - StandardAbsoluteActivity - For a substance in a mixture, the absolute activity of the pure substance at the same temperature but at standard pressure. - StandardAbsoluteActivityInAMixture - StandardAbsoluteActivity - https://qudt.org/vocab/quantitykind/StandardAbsoluteActivity - https://www.wikidata.org/wiki/Q89406159 - 9-23 - For a substance in a mixture, the absolute activity of the pure substance at the same temperature but at standard pressure. + + + + + T0 L-2 M+1 I0 Θ+1 N0 J0 + + + TemperatureMassPerAreaUnit + TemperatureMassPerAreaUnit - + - Ellipsometry + LightScattering - Ellipsometry is an optical technique that uses polarised light to probe the dielectric -properties of a sample (optical system). The common application of ellipsometry is -the analysis of thin films. Through the analysis of the state of polarisation of the -light that is reflected from the sample, ellipsometry yields information on the layers that are thinner than the wavelength of the light itself, down to a single atomic -layer or less. Depending on what is already known about the sample, the technique -can probe a range of properties including layer thickness, morphology, and chemical composition. - Ellipsometry - Ellipsometry is an optical technique that uses polarised light to probe the dielectric -properties of a sample (optical system). The common application of ellipsometry is -the analysis of thin films. Through the analysis of the state of polarisation of the -light that is reflected from the sample, ellipsometry yields information on the layers that are thinner than the wavelength of the light itself, down to a single atomic -layer or less. Depending on what is already known about the sample, the technique -can probe a range of properties including layer thickness, morphology, and chemical composition. + Light scattering is the way light behaves when it interacts with a medium that contains particles or the boundary between different mediums where defects or structures are present. It is different than the effects of refraction, where light undergoes a change in index of refraction as it passes from one medium to another, or reflection, where light reflects back into the same medium, both of which are governed by Snell’s law. Light scattering can be caused by factors such as the nature, texture, or specific structures of a surface and the presence of gas, liquid, or solid particles through which light propagates, as well as the nature of the light itself, of its wavelengths and polarization states. It usually results in diffuse light and can also affect the dispersion of color. + LightScattering + Light scattering is the way light behaves when it interacts with a medium that contains particles or the boundary between different mediums where defects or structures are present. It is different than the effects of refraction, where light undergoes a change in index of refraction as it passes from one medium to another, or reflection, where light reflects back into the same medium, both of which are governed by Snell’s law. Light scattering can be caused by factors such as the nature, texture, or specific structures of a surface and the presence of gas, liquid, or solid particles through which light propagates, as well as the nature of the light itself, of its wavelengths and polarization states. It usually results in diffuse light and can also affect the dispersion of color. - - - - ICI - - electrochemical method that measures the voltage response of an electrochemical cell under galvanostatic conditions to short interruptions in the current - IntermittentCurrentInterruptionMethod - ICI - electrochemical method that measures the voltage response of an electrochemical cell under galvanostatic conditions to short interruptions in the current + + + + + + + + + + + + + + Lepton + An elementary particle of half-integer spin (spin 1⁄2) that does not undergo strong interactions. + Lepton + An elementary particle of half-integer spin (spin 1⁄2) that does not undergo strong interactions. + https://en.wikipedia.org/wiki/Lepton - - - Tau - The class of individuals that stand for tau elementary particles belonging to the third generation of leptons. - Tau - The class of individuals that stand for tau elementary particles belonging to the third generation of leptons. - https://en.wikipedia.org/wiki/Tau_(particle) + + + + SolidGasSuspension + A coarse dispersion of gas in a solid continuum phase. + SolidGasSuspension + A coarse dispersion of gas in a solid continuum phase. - - - + + + + - - ∇ + + T+3 L0 M-1 I+2 Θ0 N-1 J0 - - - Gradient - Gradient + + AmountConductivityUnit + AmountConductivityUnit - + + + + LogarithmicUnit + A logarithmic unit is a unit that can be used to express a quantity (physical or mathematical) on a logarithmic scale, that is, as being proportional to the value of a logarithm function applied to the ratio of the quantity and a reference quantity of the same type. + Note that logarithmic units like decibel or neper are not univocally defines, since their definition depends on whether they are used to measure a "power" or a "root-power" quantity. + +It is advisory to create a uniquely defined subclass these units for concrete usage. + LogarithmicUnit + http://qudt.org/schema/qudt/LogarithmicUnit + A logarithmic unit is a unit that can be used to express a quantity (physical or mathematical) on a logarithmic scale, that is, as being proportional to the value of a logarithm function applied to the ratio of the quantity and a reference quantity of the same type. + Decibel + Note that logarithmic units like decibel or neper are not univocally defines, since their definition depends on whether they are used to measure a "power" or a "root-power" quantity. + +It is advisory to create a uniquely defined subclass these units for concrete usage. + https://en.wikipedia.org/wiki/Logarithmic_scale#Logarithmic_units + + + + - + - + - - - - - - - - - - - - - - - - - + + - BlueAntiQuark - BlueAntiQuark - - - - - MesoscopicSubstance - MesoscopicSubstance - - - - - - ElectronProbeMicroanalysis - - Electron probe microanalysis (EPMA) is used for quantitative analysis of the elemental composition of solid specimens at a micrometer scale. The method uses bombardment of the specimen by keV electrons to excite characteristic X-rays from the sample, which are then detected by using wavelength-dispersive (WD) spectrometers. - ElectronProbeMicroanalysis - Electron probe microanalysis (EPMA) is used for quantitative analysis of the elemental composition of solid specimens at a micrometer scale. The method uses bombardment of the specimen by keV electrons to excite characteristic X-rays from the sample, which are then detected by using wavelength-dispersive (WD) spectrometers. + NeutrinoType + An elementary particle with spin 1/2 that interacts only via the weak interaction and gravity. + NeutrinoType + An elementary particle with spin 1/2 that interacts only via the weak interaction and gravity. + https://en.wikipedia.org/wiki/Neutrino - - - - FunctionallyDefinedMaterial - FunctionallyDefinedMaterial + + + LeftHandedParticle + LeftHandedParticle - - - CompositePhysicalObject - The class of physical objects possessing a structure that is larger than a single composite particle, for which its bosonic or fermionic nature is undetermined. - CompositePhysicalObject - The class of physical objects possessing a structure that is larger than a single composite particle, for which its bosonic or fermionic nature is undetermined. + + + + + Rotation + Rotation + https://www.wikidata.org/wiki/Q76435127 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=102-05-22 + 3-16 - + - - + + + + + + - - - MassAttenuationCoefficient - Quotient of the linear attenuation coefficient µ and the mass density ρ of the medium. - MassAttenuationCoefficient - https://qudt.org/vocab/quantitykind/MassAttenuationCoefficient - https://www.wikidata.org/wiki/Q98591983 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-04-27 - 10-50 - Quotient of the linear attenuation coefficient µ and the mass density ρ of the medium. + + MassNumber + Number of nucleons in an atomic nucleus. + AtomicMassNumber + NucleonNumber + MassNumber + http://qudt.org/vocab/quantitykind/MassNumber + Number of nucleons in an atomic nucleus. - + - - + - - T-3 L0 M+1 I-1 Θ0 N0 J0 + + - - ElectricPotentialPerAreaUnit - ElectricPotentialPerAreaUnit - - - - - - SpecialUnit - A unit symbol that stands for a derived unit. - Special units are semiotic shortcuts to more complex composed symbolic objects. - SpecialUnit - A unit symbol that stands for a derived unit. - Pa stands for N/m2 -J stands for N m - - - - - DerivedUnit - A measurement unit for a derived quantity. --- VIM - Derived units are defined as products of powers of the base units corresponding to the relations defining the derived quantities in terms of the base quantities. - DerivedUnit - Derived units are defined as products of powers of the base units corresponding to the relations defining the derived quantities in terms of the base quantities. - derived unit - A measurement unit for a derived quantity. --- VIM + + + + EquilibriumPositionVector + In condensed matter physics, position vector of an atom or ion in equilibrium. + EquilibriumPositionVector + https://qudt.org/vocab/quantitykind/EquilibriumPositionVectorOfIon + https://www.wikidata.org/wiki/Q105533477 + 12-7.2 + In condensed matter physics, position vector of an atom or ion in equilibrium. - + - - CoulometricTitration + + ScanningTunnelingMicroscopy - Coulometric titrations are usually carried out in convective mass transfer mode using a large surface working electrode. The reference and auxiliary electrodes are located in sepa- rate compartments. A basic requirement is a 100 % current efficiency of titrant generation at the working electrode. End-point detection can be accomplished with potentiometry, amperometry, biamperometry, bipotentiometry, photometry, or by using a visual indicator. - The main advantages are that titration is possible with less stable titrants, the standardi- zation of titrant is not necessary, the volume of the test solution is not changed, and the method is easily automated. - titration in which the titrant is generated electrochemically, either by constant current or at constant potential. The titrant reacts stoichiometrically with the analyte, the amount of which is calculated using Faraday’s laws of electrolysis from the electric charge required to reach the end-point - CoulometricTitration - titration in which the titrant is generated electrochemically, either by constant current or at constant potential. The titrant reacts stoichiometrically with the analyte, the amount of which is calculated using Faraday’s laws of electrolysis from the electric charge required to reach the end-point + Scanning Tunneling Microscopy, or STM, is an imaging technique used to obtain ultra-high resolution images at the atomic scale, without using light or electron beams. + STM + ScanningTunnelingMicroscopy + Scanning Tunneling Microscopy, or STM, is an imaging technique used to obtain ultra-high resolution images at the atomic scale, without using light or electron beams. - + - + - MultiplicationFactor - Quotient of the total number of fission or fission-dependent neutrons produced in the duration of a time interval and the total number of neutrons lost by absorption and leakage in that duration. - MultiplicationFactor - https://qudt.org/vocab/quantitykind/MultiplicationFactor - https://www.wikidata.org/wiki/Q99440471 - 10-78.1 - Quotient of the total number of fission or fission-dependent neutrons produced in the duration of a time interval and the total number of neutrons lost by absorption and leakage in that duration. - - - - - - - Degenerency - Multiplicity - Degenerency - https://www.wikidata.org/wiki/Q902301 - 9-36.2 - https://doi.org/10.1351/goldbook.D01556 + VolumeFraction + Volume of a constituent of a mixture divided by the sum of volumes of all constituents prior to mixing. + VolumeFraction + http://qudt.org/vocab/quantitykind/VolumeFraction + 9-14 + Volume of a constituent of a mixture divided by the sum of volumes of all constituents prior to mixing. + https://doi.org/10.1351/goldbook.V06643 - + - - - RelativeMassDensity - Mass density ρ of a substance divided by the mass density ρ0 of a reference substance, under conditions that should be specified for both substances. - RelativeDensity - RelativeMassDensity - https://www.wikidata.org/wiki/Q11027905 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-08 - 4-4 - Mass density ρ of a substance divided by the mass density ρ0 of a reference substance, under conditions that should be specified for both substances. - https://doi.org/10.1351/goldbook.R05262 + + + + + T0 L0 M0 I0 Θ+1 N0 J0 + + + TemperatureUnit + TemperatureUnit @@ -16216,856 +15396,968 @@ J stands for N m Heat capacity at constant volume. - - - - CharacterisationHardwareSpecification - - CharacterisationHardwareSpecification + + + + + + + T-2 L0 M0 I0 Θ+1 N0 J0 + + + TemperaturePerSquareTimeUnit + TemperaturePerSquareTimeUnit - - - - - ThermalUtilizationFactor - In an infinite medium, the quotient of the number of thermal neutrons absorbed in a fissionable nuclide or in a nuclear fuel, as specified, and the total number of thermal neutrons absorbed. - ThermalUtilizationFactor - https://qudt.org/vocab/quantitykind/ThermalUtilizationFactor - https://www.wikidata.org/wiki/Q99197650 - 10-76 - In an infinite medium, the quotient of the number of thermal neutrons absorbed in a fissionable nuclide or in a nuclear fuel, as specified, and the total number of thermal neutrons absorbed. + + + + Assigner + A estimator that uses its predefined knowledge to declare a property of an object. + Assigner + A estimator that uses its predefined knowledge to declare a property of an object. + I estimate the molecular mass of the gas in my bottle as 1.00784 u because it is tagged as H. - + - - MeasuringInstrument - A measuring instrument that can be used alone is a measuring system. - Device used for making measurements, alone or in conjunction with one or more supplementary devices. + Estimator + A characteriser that declares a property for an object without actually interact with it with the specific interaction required by the property definition (i.e. infer a property from other properties). + Estimator + A characteriser that declares a property for an object without actually interact with it with the specific interaction required by the property definition (i.e. infer a property from other properties). + --- VIM - MeasuringInstrument - Device used for making measurements, alone or in conjunction with one or more supplementary devices. + + + + PermanentLiquidPhaseSintering + PermanentLiquidPhaseSintering + + + + + BlueBottomQuark + BlueBottomQuark + + + + + + + MassConcentrationOfWaterVapour + Quotient of the mass of water vapour in moist gas by the total gas volume. + The mass concentration of water at saturation is denoted vsat. + MassConcentrationOfWaterVapour + https://qudt.org/vocab/quantitykind/MassConcentrationOfWaterVapour + https://www.wikidata.org/wiki/Q76378808 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-60 + Quotient of the mass of water vapour in moist gas by the total gas volume. + + + + + + + FermiTemperature + in the free electron model, the Fermi energy divided by the Boltzmann constant + FermiTemperature + https://qudt.org/vocab/quantitykind/FermiTemperature + https://www.wikidata.org/wiki/Q105942324 + 12-28 + in the free electron model, the Fermi energy divided by the Boltzmann constant + + + + + + + + + T0 L+2 M0 I0 Θ0 N-1 J0 + + + AreaPerAmountUnit + AreaPerAmountUnit + --- VIM - measuring instrument + + + + NumericalVariable + A variable standing for a numerical defined mathematical object like e.g. a number, a vector of numbers, a matrix of numbers. + NumericalVariable + A variable standing for a numerical defined mathematical object like e.g. a number, a vector of numbers, a matrix of numbers. - - - - Polynomial - Polynomial - 2 * x^2 + x + 3 + + + + ThermalSprayingForming + ThermalSprayingForming - - - - AlgebricExpression - An expression that has parts only integer constants, variables, and the algebraic operations (addition, subtraction, multiplication, division and exponentiation by an exponent that is a rational number) - AlgebricExpression - 2x+3 + + + + FormingFromPowder + FormingFromPowder - + - - AlphaSpectrometry - Alpha spectrometry (also known as alpha(-particle) spectroscopy) is the quantitative study of the energy of alpha particles emitted by a radioactive nuclide that is an alpha emitter. As emitted alpha particles are mono-energetic (i.e. not emitted with a spectrum of energies, such as beta decay) with energies often distinct to the decay they can be used to identify which radionuclide they originated from. - AlphaSpectrometry - Alpha spectrometry (also known as alpha(-particle) spectroscopy) is the quantitative study of the energy of alpha particles emitted by a radioactive nuclide that is an alpha emitter. As emitted alpha particles are mono-energetic (i.e. not emitted with a spectrum of energies, such as beta decay) with energies often distinct to the decay they can be used to identify which radionuclide they originated from. + + Amperometry + Amperometry can be distinguished from voltammetry by the parameter being controlled (electrode potential E) and the parameter being measured (electrode current I which is usually a function of time – see chronoamperometry). In a non-stirred solution, a diffusion-limited current is usually measured, which is propor-tional to the concentration of an electroactive analyte. The current is usually faradaic and the applied potential is usually constant. The integral of current with time is the electric charge, which may be related to the amount of substance reacted by Faraday’s laws of electrolysis. + The amperometric method provides the ability to distinguish selectively between a number of electroactive species in solution by judicious selection of the applied potential and/or choice of electrode material. + Amperometry + The amperometric method provides the ability to distinguish selectively between a number of electroactive species in solution by judicious selection of the applied potential and/or choice of electrode material. + https://doi.org/10.1515/pac-2018-0109 - + - - Diameter - The diameter of a circle or a sphere is twice its radius. - maximal distance of two points of an object, in a given direction or along a straight line passing through the centre. - Diameter - https://qudt.org/vocab/quantitykind/Diameter - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-01-27 - https://dbpedia.org/page/Diameter - 3-1.5 - maximal distance of two points of an object, in a given direction or along a straight line passing through the centre. - https://en.wikipedia.org/wiki/Diameter - - - - - T+3 L-2 M-1 I0 Θ0 N0 J+1 + T+4 L-4 M-2 I0 Θ0 N0 J0 - LuminousEfficacyUnit - LuminousEfficacyUnit + ReciprocalSquareEnergyUnit + ReciprocalSquareEnergyUnit - - - - MeasurementDataPostProcessing - - Application of a post-processing model to signals through a software, in order to calculate the final characterisation property. - MeasurementDataPostProcessing - Application of a post-processing model to signals through a software, in order to calculate the final characterisation property. - Analysis of SEM (or optical) images to gain additional information (image filtering/integration/averaging, microstructural analysis, grain size evaluation, Digital Image Correlation procedures, etc.) - In nanoindentation testing, this is the Oliver-Pharr method, which allows calculating the elastic modulus and hardness of the sample by using the load and depth measured signals. + + + + + + + + + MixedTiling + A well formed tessellation with at least a junction tile. + MixedTiling + A well formed tessellation with at least a junction tile. - - - - PostProcessingModel - - Mathematical model used to process data. - The PostProcessingModel use is mainly intended to get secondary data from primary data. - PostProcessingModel - Mathematical model used to process data. - The PostProcessingModel use is mainly intended to get secondary data from primary data. + + + + + + + + + + + VolumicTotalCrossSection + Product of the number density na of the atoms and the cross section σ_tot for a given type of atoms + MacroscopicTotalCrossSection + VolumicTotalCrossSection + https://qudt.org/vocab/quantitykind/MacroscopicTotalCrossSection + https://www.wikidata.org/wiki/Q98280548 + 10-42.2 + Product of the number density na of the atoms and the cross section σ_tot for a given type of atoms - - - - PhaseOfMatter - A matter object throughout which all physical properties of a material are essentially uniform. - In the physical sciences, a phase is a region of space (a thermodynamic system), throughout which all physical properties of a material are essentially uniform. Examples of physical properties include density, index of refraction, magnetization and chemical composition. A simple description is that a phase is a region of material that is chemically uniform, physically distinct, and (often) mechanically separable. In a system consisting of ice and water in a glass jar, the ice cubes are one phase, the water is a second phase, and the humid air is a third phase over the ice and water. The glass of the jar is another separate phase. + + + PolymericMaterial + PolymericMaterial + -The term phase is sometimes used as a synonym for state of matter, but there can be several immiscible phases of the same state of matter. Also, the term phase is sometimes used to refer to a set of equilibrium states demarcated in terms of state variables such as pressure and temperature by a phase boundary on a phase diagram. Because phase boundaries relate to changes in the organization of matter, such as a change from liquid to solid or a more subtle change from one crystal structure to another, this latter usage is similar to the use of "phase" as a synonym for state of matter. However, the state of matter and phase diagram usages are not commensurate with the formal definition given above and the intended meaning must be determined in part from the context in which the term is used. - Phase - PhaseOfMatter - A matter object throughout which all physical properties of a material are essentially uniform. - In the physical sciences, a phase is a region of space (a thermodynamic system), throughout which all physical properties of a material are essentially uniform. Examples of physical properties include density, index of refraction, magnetization and chemical composition. A simple description is that a phase is a region of material that is chemically uniform, physically distinct, and (often) mechanically separable. In a system consisting of ice and water in a glass jar, the ice cubes are one phase, the water is a second phase, and the humid air is a third phase over the ice and water. The glass of the jar is another separate phase. + + + + + LatentHeatOfPhaseTransition + Energy to be added to or removed from a system under constant temperature and pressure to undergo a complete phase transition. + LatentHeatOfPhaseTransition + https://www.wikidata.org/wiki/Q106553458 + 9-16 + Energy to be added to or removed from a system under constant temperature and pressure to undergo a complete phase transition. + -The term phase is sometimes used as a synonym for state of matter, but there can be several immiscible phases of the same state of matter. Also, the term phase is sometimes used to refer to a set of equilibrium states demarcated in terms of state variables such as pressure and temperature by a phase boundary on a phase diagram. Because phase boundaries relate to changes in the organization of matter, such as a change from liquid to solid or a more subtle change from one crystal structure to another, this latter usage is similar to the use of "phase" as a synonym for state of matter. However, the state of matter and phase diagram usages are not commensurate with the formal definition given above and the intended meaning must be determined in part from the context in which the term is used. + + + + + LatentHeat + LatentHeat + https://www.wikidata.org/wiki/Q207721 + 5-6.2 - - - - - - MetricPrefix - Dimensionless multiplicative unit prefix. - https://en.wikipedia.org/wiki/Metric_prefix - MetricPrefix - Dimensionless multiplicative unit prefix. + + + + DoseEquivalentRate + Time derivative of the dose equivalent. + DoseEquivalentRate + https://www.wikidata.org/wiki/Q99604810 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-14-02 + 10-83.2 + Time derivative of the dose equivalent. - - - - Constant - A variable that stand for a numerical constant, even if it is unknown. - Constant - A variable that stand for a numerical constant, even if it is unknown. + + + + + SolidSolution + A solid solution made of two or more component substances. + SolidSolution + A solid solution made of two or more component substances. - + + + + + + + + + + + + + + + + + + + + + + + SpatioTemporalTile + https://w3id.org/emmo#EMMO_22c91e99_61f8_4433_8853_432d44a2a46a + WellFormedTile + SpatioTemporalTile + + + - - - CyclotronAngularFrequency - Quotient of the product of the electric charge of a particle and the magnitude of the magnetic flux density of the magnetic field, and the particle mass. - CyclotronAngularFrequency - https://qudt.org/vocab/quantitykind/CyclotronAngularFrequency - https://www.wikidata.org/wiki/Q97708211 - 10-16 - Quotient of the product of the electric charge of a particle and the magnitude of the magnetic flux density of the magnetic field, and the particle mass. + + + + + + + + + ThermalInsulance + Reciprocal of the coefficient of heat transfer. + CoefficientOfThermalInsulance + ThermalInsulance + https://qudt.org/vocab/quantitykind/ThermalInsulance + https://www.wikidata.org/wiki/Q2596212 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-41 + 5-11 + Reciprocal of the coefficient of heat transfer. + + + + + + FatigueTesting + + Fatigue testing is a specialised form of mechanical testing that is performed by applying cyclic loading to a coupon or structure. These tests are used either to generate fatigue life and crack growth data, identify critical locations or demonstrate the safety of a structure that may be susceptible to fatigue. + FatigueTesting + Fatigue testing is a specialised form of mechanical testing that is performed by applying cyclic loading to a coupon or structure. These tests are used either to generate fatigue life and crack growth data, identify critical locations or demonstrate the safety of a structure that may be susceptible to fatigue. - + - - AcousticQuantity - Quantities categorised according to ISO 80000-8. - AcousticQuantity - Quantities categorised according to ISO 80000-8. + + + QualityFactor + Factor taking into account health effects in the determination of the dose equivalent. + QualityFactor + https://qudt.org/vocab/quantitykind/DoseEquivalentQualityFactor + https://www.wikidata.org/wiki/Q2122099 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-14-03 + 10-82 + Factor taking into account health effects in the determination of the dose equivalent. - + - T-1 L0 M-1 I0 Θ0 N0 J0 + T-3 L+3 M+1 I-2 Θ0 N0 J0 - PerTimeMassUnit - PerTimeMassUnit + ElectricResistivityUnit + ElectricResistivityUnit - + + + + DataExchangeLanguage + A computer language that is domain-independent and can be used for expressing data from any kind of discipline. + DataExchangeLanguage + A computer language that is domain-independent and can be used for expressing data from any kind of discipline. + JSON, YAML, XML + https://en.wikipedia.org/wiki/Data_exchange#Data_exchange_languages + + + - T+2 L0 M-1 I0 Θ0 N0 J0 + T+1 L+1 M0 I0 Θ+1 N0 J0 - SquareTimePerMassUnit - SquareTimePerMassUnit + LengthTimeTemperatureUnit + LengthTimeTemperatureUnit - - - BlueBottomAntiQuark - BlueBottomAntiQuark + + + + SolidAngle + Ratio of area on a sphere to its radius squared. + SolidAngle + http://qudt.org/vocab/quantitykind/SolidAngle + 3-6 + Ratio of area on a sphere to its radius squared. + https://doi.org/10.1351/goldbook.S05732 - + - - + + + QualityFactor + Dimensionless quantity in electromagnetism. + QualityFactor + https://qudt.org/vocab/quantitykind/QualityFactor + https://www.wikidata.org/wiki/Q79467569 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=151-15-45 + 6-53 + Dimensionless quantity in electromagnetism. + + + + + - - T0 L+2 M+1 I0 Θ0 N0 J0 + + - - MassAreaUnit - MassAreaUnit + + + + TotalLinearStoppingPower + For charged particles of a given type and energy E0 the differential quotient of E with respect to x, where E is the mean energy lost by the charged particles in traversing a distance x in the given material. + LinearStoppingPower + TotalLinearStoppingPower + https://qudt.org/vocab/quantitykind/TotalLinearStoppingPower + https://www.wikidata.org/wiki/Q908474 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-27 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-12-49 + 10-54 + For charged particles of a given type and energy E0 the differential quotient of E with respect to x, where E is the mean energy lost by the charged particles in traversing a distance x in the given material. + https://doi.org/10.1351/goldbook.S06035 - + + + + AtomicForceMicroscopy + Atomic force microscopy (AFM) is an influential surface analysis technique used for micro/nanostructured coatings. This flexible technique can be used to obtain high-resolution nanoscale images and study local sites in air (conventional AFM) or liquid (electrochemical AFM) surroundings. + AtomicForceMicroscopy + Atomic force microscopy (AFM) is an influential surface analysis technique used for micro/nanostructured coatings. This flexible technique can be used to obtain high-resolution nanoscale images and study local sites in air (conventional AFM) or liquid (electrochemical AFM) surroundings. + + + + + + InterferenceFitting + InterferenceFitting + + + + + + DrawForming + Draw forming by drawing a workpiece through a tool opening that is narrowed in the drawing direction. + DrawForming + + + - + - - DiffusionArea - One-sixth of the mean square distance between the point where a neutron enters a specified class and the point where it leaves this class. - DiffusionArea - https://qudt.org/vocab/quantitykind/DiffusionArea - https://www.wikidata.org/wiki/Q98966292 - 10-72.2 - One-sixth of the mean square distance between the point where a neutron enters a specified class and the point where it leaves this class. + Intensity + Power transferred per unit area. + Intensity + Power transferred per unit area. + https://en.wikipedia.org/wiki/Intensity_(physics) - - + + + + PositionVector + Vector quantity from the origin of a coordinate system to a point in space. + PositionVector + https://www.wikidata.org/wiki/Q192388 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=102-03-15 + https://dbpedia.org/page/Position_(geometry) + 3-1.10 + Vector quantity from the origin of a coordinate system to a point in space. + https://en.wikipedia.org/wiki/Position_(geometry) + + + + - T-3 L+1 M0 I0 Θ0 N0 J0 + T+2 L0 M-1 I+1 Θ0 N0 J0 - LengthPerCubeTimeUnit - LengthPerCubeTimeUnit - - - - - - - Status - An object which is an holistic temporal part of a process. - State - Status - An object which is an holistic temporal part of a process. - A semi-naked man is a status in the process of a man's dressing. - - - - - - - SubObject - An object which is an holistic temporal part of another object. - Here we consider a temporal interval that is lower than the characteristic time of the physical process that provides the causality connection between the object parts. - SubObject - An object which is an holistic temporal part of another object. - If an inhabited house is considered as an house that is occupied by some people in its majority of time, then an interval of inhabited house in which occasionally nobody is in there is no more an inhabited house, but an unhinabited house, since this temporal part does not satisfy the criteria of the whole. + ElectricMobilityUnit + ElectricMobilityUnit - - - - - ReactionEnergy - In a nuclear reaction, sum of the kinetic energies and photon energies of the reaction products minus the sum of the kinetic and photon energies of the reactants. - ReactionEnergy - https://qudt.org/vocab/quantitykind/ReactionEnergy - https://www.wikidata.org/wiki/Q98164745 - 10-37.1 - In a nuclear reaction, sum of the kinetic energies and photon energies of the reaction products minus the sum of the kinetic and photon energies of the reactants. + + + + AmountFractionUnit + Unit for quantities of dimension one that are the fraction of two amount of substance. + AmountFractionUnit + Unit for quantities of dimension one that are the fraction of two amount of substance. + Unit for amount fraction. - - - MetallicMaterial - MetallicMaterial + + + + + + + + + + + + + + + + + + + + + Determiner + An 'interpreter' that perceives another 'entity' (the 'object') through a specific perception mechanism and produces a 'property' (the 'sign') that stands for the result of that particular perception. + Determiner + An 'interpreter' that perceives another 'entity' (the 'object') through a specific perception mechanism and produces a 'property' (the 'sign') that stands for the result of that particular perception. - + - - Enthalpy - Measurement of energy in a thermodynamic system. - Enthalpy - http://qudt.org/vocab/quantitykind/Enthalpy - 5.20-3 - https://doi.org/10.1351/goldbook.E02141 + + + + + + + + + ModulusOfCompression + Measure of how resistant to compressibility a substance is. + BulkModulus + ModulusOfCompression + https://qudt.org/vocab/quantitykind/BulkModulus + https://www.wikidata.org/wiki/Q900371 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-69 + 4-19.3 + Measure of how resistant to compressibility a substance is. + + + + + + Folding + Folding DataQuality - Evaluation of quality indicators to determine how well suited a data set is to be used for the characterisation of a material. DataQuality Evaluation of quality indicators to determine how well suited a data set is to be used for the characterisation of a material. Example evaluation of S/N ratio, or other quality indicators (limits of detection/quantification, statistical analysis of data, data robustness analysis) - + - - - ElectronRadius - Radius of a sphere such that the relativistic electron energy is distributed uniformly. - ElectronRadius - https://www.wikidata.org/wiki/Q2152581 - 10-19.2 - Radius of a sphere such that the relativistic electron energy is distributed uniformly. + + + PowerFactor + Under periodic conditions, ratio of the absolute value of the active power P to the apparent power S. + PowerFactor + https://qudt.org/vocab/quantitykind/PowerFactor + https://www.wikidata.org/wiki/Q750454 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-11-46 + 6-58 + Under periodic conditions, ratio of the absolute value of the active power P to the apparent power S. - - - - Cutting - Mechanical separation of workpieces without the formation of shapeless material, i.e. also without chips (chipless). - Schneiden - Cutting + + + + + + + + + + + PlanckFunction + Ngative quotient of Gibbs energy and temperature. + PlanckFunction + https://qudt.org/vocab/quantitykind/PlanckFunction + https://www.wikidata.org/wiki/Q76364998 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-25 + 5-23 + Ngative quotient of Gibbs energy and temperature. - + + + + InteractionVolume + + In some cases, (like tribological characterisations) the “sample” can also be the “probe”. When analysing a system of samples that interact each other, finding a clear definition can become a complex problem. + The volume of material, and the surrounding environment, that interacts with the probe and generate a detectable (measurable) signal (information). + InteractionVolume + The volume of material, and the surrounding environment, that interacts with the probe and generate a detectable (measurable) signal (information). + In Scanning Electron Microscopy (SEM), the interaction volume is the volume of material that interacts directly with the incident electron beam, is usually much smaller than the entire specimen’s volume, and can be computed by using proper models. The interaction between the scanning probe and the sample generates a series of detectable signals (back scattered electrons, secondary electrons, x-rays, specimen current, etc.) which contain information on sample morphology, microstructure, composition, etc. + In x-ray diffraction, the interaction volume is the volume of material that interacts directly with the x-ray beam and is usually smaller than the volume of the entire specimen. Depending on sample’s structure and microstructure, the interaction between the sample and the x-ray incident beam generates a secondary (reflected) beam that is measured by a detector and contains information on certain sample’s properties (e.g., crystallographic structure, phase composition, grain size, residual stress, …). + In some cases, (like tribological characterisations) the “sample” can also be the “probe”. When analysing a system of samples that interact each other, finding a clear definition can become a complex problem. + It is important to note that, in some cases, the volume of interaction could be different from the volume of detectable signal emission. Example: in Scanning Electron Microscopy (SEM), the volume of interaction between the electron probe and the material is different from the volumes that generate the captured signal. + + + - - PH - At about 25 °C aqueous solutions with: -pH < 7 are acidic; -pH = 7 are neutral; -pH > 7 are alkaline. -At temperatures far from 25 °C the pH of a neutral solution differs significantly from 7. - Number quantifying the acidic or the alkaline character of a solution, equal to the negative of the decimal logarithm of ion activity aH+ of the hydrogen cation H+ -pH = −10 log(a_H+). - Written as pH - PH - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-01-21 - For more details, see ISO 80000-9:2009, Annex C - Number quantifying the acidic or the alkaline character of a solution, equal to the negative of the decimal logarithm of ion activity aH+ of the hydrogen cation H+ -pH = −10 log(a_H+). - https://doi.org/10.1351/goldbook.P04524 + + ElectricCurrentPhasor + ElectricCurrentPhasor + https://qudt.org/vocab/quantitykind/ElectricCurrentPhasor + https://www.wikidata.org/wiki/Q78514596 + 6-49 - - + + - - + + - - PhysicsBasedModel - A mathematical entity based on a fundamental physics theory which defines the relations between physics quantities of an entity. - CEN Workshop Agreement – CWA 17284 “Materials modelling – terminology, classification and metadata” - PhysicsBasedModel - A mathematical entity based on a fundamental physics theory which defines the relations between physics quantities of an entity. - - - - - - - PureParallelWorkflow - A workflow that is the concurrent evolution of two or more tasks, not communicacting between themselves. - EmbarassinglyParallelWorkflow - PureParallelWorkflow - A workflow that is the concurrent evolution of two or more tasks, not communicacting between themselves. + + + Entropy + Logarithmic measure of the number of available states of a system. + May also be referred to as a measure of order of a system. + Entropy + http://qudt.org/vocab/quantitykind/Entropy + 5-18 + https://doi.org/10.1351/goldbook.E02149 - - - - ParallelWorkflow - ParallelWorkflow + + + + + MicrocanonicalPartitionFunction + MicrocanonicalPartitionFunction + https://qudt.org/vocab/quantitykind/MicroCanonicalPartitionFunction + https://www.wikidata.org/wiki/Q96106546 + 9-35.1 - - - - ElectricImpedance - Measure of the opposition that a circuit presents to a current when a voltage is applied. - Impedance - ElectricImpedance - http://qudt.org/vocab/quantitykind/Impedance - https://www.wikidata.org/wiki/Q179043 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-43 - 6-51.1 - https://en.wikipedia.org/wiki/Electrical_impedance + + + + Milling + Machining with a circular cutting movement, usually associated with a multi-toothed tool, and with a feed movement perpendicular or oblique to the axis of rotation of the tool, to produce any workpiece surface. + Fräsen + Milling - + - - + - - T-3 L-2 M+2 I0 Θ0 N0 J0 + + - - SquarePressureTimeUnit - SquarePressureTimeUnit + + + + MassFlow + At a point in a fluid, the product of mass density and velocity. + MassFlow + https://www.wikidata.org/wiki/Q3265048 + 4-30.1 + At a point in a fluid, the product of mass density and velocity. - - - - Dilatometry - - Dilatometry is a method for characterising the dimensional changes of materials with variation of temperature conditions. - https://www.lboro.ac.uk/research/lmcc/facilities/dilatometry/#:~:text=Dilatometry%20is%20a%20method%20for,to%20mimic%20an%20industrial%20process. - Dilatometry - Dilatometry is a method for characterising the dimensional changes of materials with variation of temperature conditions. + + + + Assignment + A estimation of a property by a criteria based on the pre-existing knowledge of the estimator. + Assignment + A estimation of a property by a criteria based on the pre-existing knowledge of the estimator. + The Argon gas in my bottle has ionisation energy of 15.7596 eV. This is not measured but assigned to this material by previous knowledge. - + + + + DigitalData + Discrete data that are decoded as a sequence of 1/0, or true/false, or on/off. + BinaryData + DigitalData + Discrete data that are decoded as a sequence of 1/0, or true/false, or on/off. + + + - - - PartialPressure - Hypothetical pressure of gas if it alone occupied the volume of the mixture at the same temperature. - PartialPressure - https://qudt.org/vocab/quantitykind/PartialPressure - https://www.wikidata.org/wiki/Q27165 - 9-19 - Hypothetical pressure of gas if it alone occupied the volume of the mixture at the same temperature. - https://doi.org/10.1351/goldbook.P04420 + + + MolarGasConstant + Equivalent to the Boltzmann constant, but expressed in units of energy per temperature increment per mole (rather than energy per temperature increment per particle). + MolarGasConstant + http://qudt.org/vocab/constant/MolarGasConstant + 9-37.1 + Equivalent to the Boltzmann constant, but expressed in units of energy per temperature increment per mole (rather than energy per temperature increment per particle). + https://doi.org/10.1351/goldbook.G02579 + + + + + + + + + + + + + SpecificGasConstant + SpecificGasConstant + https://www.wikidata.org/wiki/Q94372268 + 5-26 + + + + + CausalCollapse + A causal collapse is a fundamental interaction that is expressed as a complete bipartite directed graph K(m,n), when m>n. + CausalCollapse + A causal collapse is a fundamental interaction that is expressed as a complete bipartite directed graph K(m,n), when m>n. - + - + + - - + + T-3 L-1 M+1 I0 Θ0 N0 J0 - - - - Pressure - The force applied perpendicular to the surface of an object per unit area over which that force is distributed. - Pressure - http://qudt.org/vocab/quantitykind/Pressure - 4-14.1 - The force applied perpendicular to the surface of an object per unit area over which that force is distributed. - https://doi.org/10.1351/goldbook.P04819 + + PressurePerTimeUnit + PressurePerTimeUnit - + + + + + ChargeNumber + For a particle, electric charge q divided by elementary charge e. + The charge number of a particle may be presented as a superscript to the symbol of that particle, e.g. H+, He++, Al3+, Cl−, S=, N3−. + The charge number of an electrically charged particle can be positive or negative. The charge number of an electrically neutral particle is zero. + IonizationNumber + ChargeNumber + https://qudt.org/vocab/quantitykind/ChargeNumber + https://www.wikidata.org/wiki/Q1800063 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-05-17 + https://dbpedia.org/page/Charge_number + 10-5.2 + For a particle, electric charge q divided by elementary charge e. + https://en.wikipedia.org/wiki/Charge_number + https://doi.org/10.1351/goldbook.C00993 + + + - - NuclearMagneticResonance + + + RawData - Nuclear magnetic resonance spectroscopy, most commonly known as NMR spectroscopy or magnetic resonance spectroscopy (MRS), is a spectroscopic technique to observe local magnetic fields around atomic nuclei. This spectroscopy is based on the measurement of absorption of electromagnetic radiations in the radio frequency region from roughly 4 to 900 MHz. Absorption of radio waves in the presence of magnetic field is accompanied by a special type of nuclear transition, and for this reason, such type of spectroscopy is known as Nuclear Magnetic Resonance Spectroscopy. The sample is placed in a magnetic field and the NMR signal is produced by excitation of the nuclei sample with radio waves into nuclear magnetic resonance, which is detected with sensitive radio receivers. The intramolecular magnetic field around an atom in a molecule changes the resonance frequency, thus giving access to details of the electronic structure of a molecule and its individual functional groups. As the fields are unique or highly characteristic to individual compounds, in modern organic chemistry practice, NMR spectroscopy is the definitive method to identify monomolecular organic compounds. - Magnetic resonance spectroscopy (MRS) - NMR - NuclearMagneticResonance - Nuclear magnetic resonance spectroscopy, most commonly known as NMR spectroscopy or magnetic resonance spectroscopy (MRS), is a spectroscopic technique to observe local magnetic fields around atomic nuclei. This spectroscopy is based on the measurement of absorption of electromagnetic radiations in the radio frequency region from roughly 4 to 900 MHz. Absorption of radio waves in the presence of magnetic field is accompanied by a special type of nuclear transition, and for this reason, such type of spectroscopy is known as Nuclear Magnetic Resonance Spectroscopy. The sample is placed in a magnetic field and the NMR signal is produced by excitation of the nuclei sample with radio waves into nuclear magnetic resonance, which is detected with sensitive radio receivers. The intramolecular magnetic field around an atom in a molecule changes the resonance frequency, thus giving access to details of the electronic structure of a molecule and its individual functional groups. As the fields are unique or highly characteristic to individual compounds, in modern organic chemistry practice, NMR spectroscopy is the definitive method to identify monomolecular organic compounds. + Direct output of the equipment with the manufacturer’s software including automatic pre-processing that is not modified by the user once the acquisition method is defined and the equipment calibrated. + In some cases, raw data can be considered to have already some level of data processing, e.g., in electron microscopy a “raw image” that is formed on the screen is already result from multiple processing after the signal is acquired by the detector. + RawData + Direct output of the equipment with the manufacturer’s software including automatic pre-processing that is not modified by the user once the acquisition method is defined and the equipment calibrated. + The raw data is a set of (unprocessed) data that is given directly as output from the detector, usually expressed as a function of time or position, or photon energy. + In mechanical testing, examples of raw data are raw-force, raw-displacement, coordinates as function of time. + In spectroscopic testing, the raw data are light intensity, or refractive index, or optical absorption as a function of the energy (or wavelength) of the incident light beam. + In some cases, raw data can be considered to have already some level of data processing, e.g., in electron microscopy a “raw image” that is formed on the screen is already result from multiple processing after the signal is acquired by the detector. - + + + + + MathematicalFormula + A mathematical string that express a relation between the elements in one set X to elements in another set Y. + The set X is called domain and the set Y range or codomain. + MathematicalFormula + A mathematical string that express a relation between the elements in one set X to elements in another set Y. + + + - + - LuminousFlux - Perceived power of light. - LuminousFlux - http://qudt.org/vocab/quantitykind/LuminousFlux - 7-13 - Perceived power of light. - https://doi.org/10.1351/goldbook.L03646 + + LinearMassDensity + Mass per length. + LinearDensity + LineicMass + LinearMassDensity + https://qudt.org/vocab/quantitykind/LinearDensity + https://www.wikidata.org/wiki/Q56298294 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-11 + 4-6 + Mass per length. - - - + + + + - - + + T+1 L+1 M0 I+1 Θ0 N0 J0 - - - - AcceptorDensity - quotient of number of acceptor levels and volume. - AcceptorDensity - https://qudt.org/vocab/quantitykind/AcceptorDensity - https://www.wikidata.org/wiki/Q105979968 - 12-29.5 - quotient of number of acceptor levels and volume. + + LengthTimeCurrentUnit + LengthTimeCurrentUnit - + - - SpecificHelmholtzEnergy - Helmholtz energy per unit mass. - SpecificHelmholtzEnergy - https://qudt.org/vocab/quantitykind/SpecificHelmholtzEnergy - https://www.wikidata.org/wiki/Q76359554 - 5-21.4 - Helmholtz energy per unit mass. + + + LowerCriticalMagneticFluxDensity + For type II superconductors, the threshold magnetic flux density for magnetic flux entering the superconductor. + LowerCriticalMagneticFluxDensity + https://qudt.org/vocab/quantitykind/LowerCriticalMagneticFluxDensity + https://www.wikidata.org/wiki/Q106127355 + 12-36.2 + For type II superconductors, the threshold magnetic flux density for magnetic flux entering the superconductor. - - - - - - - - - - - - - - - - - - - BottomQuark - BottomQuark - https://en.wikipedia.org/wiki/Bottom_quark + + + + ProductionSystem + A network of objects that implements a production process through a series of interconnected elements. + ProductionSystem + A network of objects that implements a production process through a series of interconnected elements. - - - - StandardizedPhysicalQuantity - The superclass for all physical quantities classes that are categorized according to a standard (e.g. ISQ). - StandardizedPhysicalQuantity - The superclass for all physical quantities classes that are categorized according to a standard (e.g. ISQ). + + + + Network + A system whose is mainly characterised by the way in which elements are interconnected. + Network + A system whose is mainly characterised by the way in which elements are interconnected. - - - - Interpretant - The interpreter's internal representation of the object in a semiosis process. - Interpretant - The interpreter's internal representation of the object in a semiosis process. + + + + + GrueneisenParamter + Describes the effect that changing the volume of a crystal lattice has on its vibrational properties, and, as a consequence, the effect that changing temperature has on the size or dynamics of the lattice. + GrueneisenParamter + https://www.wikidata.org/wiki/Q444656 + 12-14 + Describes the effect that changing the volume of a crystal lattice has on its vibrational properties, and, as a consequence, the effect that changing temperature has on the size or dynamics of the lattice. - - - - - - - - - - - - - - - - - - - UpQuark - UpQuark - https://en.wikipedia.org/wiki/Up_quark - + + + + GammaSpectrometry + + Gamma-ray spectroscopy is the qualitative study of the energy spectra of gamma-ray sources, such as in the nuclear industry, geochemical investigation, and astrophysics.[1] Gamma-ray spectrometry, on the other hand, is the method used to acquire a quantitative spectrum measurement.[2] - - - - - - - T0 L-3 M0 I0 Θ0 N-1 J0 - - - ReciprocalAmountPerVolumeUnit - ReciprocalAmountPerVolumeUnit +Most radioactive sources produce gamma rays, which are of various energies and intensities. When these emissions are detected and analyzed with a spectroscopy system, a gamma-ray energy spectrum can be produced. + +A detailed analysis of this spectrum is typically used to determine the identity and quantity of gamma emitters present in a gamma source, and is a vital tool in radiometric assay. The gamma spectrum is characteristic of the gamma-emitting nuclides contained in the source, just like in an optical spectrometer, the optical spectrum is characteristic of the material contained in a sample. + GammaSpectrometry + Gamma-ray spectroscopy is the qualitative study of the energy spectra of gamma-ray sources, such as in the nuclear industry, geochemical investigation, and astrophysics.[1] Gamma-ray spectrometry, on the other hand, is the method used to acquire a quantitative spectrum measurement.[2] + +Most radioactive sources produce gamma rays, which are of various energies and intensities. When these emissions are detected and analyzed with a spectroscopy system, a gamma-ray energy spectrum can be produced. + +A detailed analysis of this spectrum is typically used to determine the identity and quantity of gamma emitters present in a gamma source, and is a vital tool in radiometric assay. The gamma spectrum is characteristic of the gamma-emitting nuclides contained in the source, just like in an optical spectrometer, the optical spectrum is characteristic of the material contained in a sample. - - - - - - - - + + + - - - - - - - + + + T0 L0 M0 I0 Θ+2 N0 J0 + - Semiosis - A 'Process', that has participant an 'Interpreter', that is aimed to produce a 'Sign' representing another participant, the 'Object'. - Semiosis - A 'Process', that has participant an 'Interpreter', that is aimed to produce a 'Sign' representing another participant, the 'Object'. - Me looking a cat and saying loud: "Cat!" -> the semiosis process - -me -> interpreter -cat -> object (in Peirce semiotics) -the cat perceived by my mind -> interpretant -"Cat!" -> sign, the produced sign + SquareTemperatureUnit + SquareTemperatureUnit - + - - - StandardAbsoluteActivity - Property of a solute in a solution. - StandardAbsoluteActivityInASolution - StandardAbsoluteActivity - https://www.wikidata.org/wiki/Q89485936 - 9-26 - Property of a solute in a solution. + + + BraggAngle + Angle between the scattered ray and the lattice plane. + BraggAngle + https://qudt.org/vocab/quantitykind/BraggAngle + https://www.wikidata.org/wiki/Q105488118 + 12-4 + Angle between the scattered ray and the lattice plane. - + - T-3 L0 M+1 I0 Θ0 N0 J0 + T-1 L+2 M-1 I0 Θ+1 N0 J0 - PowerDensityUnit - PowerDensityUnit + TemperatureAreaPerMassTimeUnit + TemperatureAreaPerMassTimeUnit - - - NeutralAtom - A standalone atom that has no net charge. - NeutralAtom - A standalone atom that has no net charge. + + + + + Bending + Forming of a solid body, whereby the plastic state is essentially brought about by a bending stress + Bending - + + - - RelativeVolumeStrain - Quotient of change of volume and original volume. - BulkStrain - VolumeStrain - RelativeVolumeStrain - https://qudt.org/vocab/quantitykind/VolumeStrain - https://www.wikidata.org/wiki/Q73432507 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-60 - 4-17.4 - Quotient of change of volume and original volume. - https://doi.org/10.1351/goldbook.V06648 - - - - - - - - - - - - - - - Component - A constituent of a system. - Component - A constituent of a system. + KineticFrictionFactor + DynamicFrictionFactor + KineticFrictionFactor + https://www.wikidata.org/wiki/Q73695445 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-32 + 4-23.2 - - - - - - - - - - - - - - - - - - - StrangeQuark - StrangeQuark - https://en.wikipedia.org/wiki/Strange_quark + + + + + DebyeWallerFactor + Factor by which the intensity of a diffraction line is reduced because of the lattice vibrations. + DebyeWallerFactor + https://qudt.org/vocab/quantitykind/Debye-WallerFactor + https://www.wikidata.org/wiki/Q902587 + 12-8 + Factor by which the intensity of a diffraction line is reduced because of the lattice vibrations. - - + + - T+3 L-2 M-1 I+2 Θ0 N0 J0 - - - ElectricConductanceUnit - ElectricConductanceUnit - - - - - - - - + T+2 L+1 M-1 I0 Θ0 N0 J0 - - - - SpecificEntropy - SpecificEntropy - https://qudt.org/vocab/quantitykind/SpecificEntropy - https://www.wikidata.org/wiki/Q69423705 - 5-19 - - - - - - - - - - - - - - - - - - SecondGenerationFermion - SecondGenerationFermion - - - - - - - - - - - - - - - - - - - - - CharmQuark - CharmQuark - https://en.wikipedia.org/wiki/Charm_quark + PerPressureUnit + PerPressureUnit - + - - LinearChronopotentiometry + + DynamicMechanicalAnalysis - chronopotentiometry where the applied current is changed linearly - LinearChronopotentiometry - chronopotentiometry where the applied current is changed linearly - - - - - - - - - - - - - - - - - - - - - - - MathematicalSymbol - MathematicalSymbol + Dynamic mechanical analysis (abbreviated DMA) is a characterisation technique where a sinusoidal stress is applied and the strain in the material is measured, allowing one to determine the complex modulus. The temperature of the sample or the frequency of the stress are often varied, leading to variations in the complex modulus; this approach can be used to locate the glass transition temperature[1] of the material, as well as to identify transitions corresponding to other molecular motions. + DynamicMechanicalAnalysis + Dynamic mechanical analysis (abbreviated DMA) is a characterisation technique where a sinusoidal stress is applied and the strain in the material is measured, allowing one to determine the complex modulus. The temperature of the sample or the frequency of the stress are often varied, leading to variations in the complex modulus; this approach can be used to locate the glass transition temperature[1] of the material, as well as to identify transitions corresponding to other molecular motions. - - - - Susceptance - imaginary part of the admittance - Susceptance - https://qudt.org/vocab/quantitykind/Susceptance - https://www.wikidata.org/wiki/Q509598 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-54 - 6-52.3 - imaginary part of the admittance + + + + DirectCoulometryAtControlledCurrent + + Direct coulometry at controlled current is usually carried out in convective mass transfer mode. The end-point of the electrolysis, at which the current is stopped, must be determined either from the inflection point in the E–t curve or by using visual or objective end-point indi- cation, similar to volumetric methods. The total electric charge is calculated as the product of the constant current and time of electrolysis or can be measured directly using a coulometer. + The advantage of this method is that the electric charge consumed during the electrode reaction is directly proportional to the electrolysis time. Care must be taken to avoid the potential region where another electrode reaction may occur. + coulometry at an imposed, constant current in the electrochemical cell + DirectCoulometryAtControlledCurrent + coulometry at an imposed, constant current in the electrochemical cell - + - + - + - + @@ -17073,1700 +16365,1890 @@ the cat perceived by my mind -> interpretant - DownAntiQuarkType - DownAntiQuarkType + GaugeBoson + A bosonic elementary particle that mediates interactions among elementary fermions, and thus acts as a force carrier. + All known gauge bosons have a spin of 1 and are hence also vector bosons. + GaugeBoson + A bosonic elementary particle that mediates interactions among elementary fermions, and thus acts as a force carrier. + All known gauge bosons have a spin of 1 and are hence also vector bosons. + Gauge bosons can carry any of the four fundamental interactions of nature. + https://en.wikipedia.org/wiki/Gauge_boson - + + + RedCharmAntiQuark + RedCharmAntiQuark + + + - + - - LinearElectricCurrentDensity - Surface density of electric charge multiplied by velocity - LinearElectricCurrentDensity - https://qudt.org/vocab/quantitykind/LinearElectricCurrentDensity - https://www.wikidata.org/wiki/Q2356741 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-12 - 6-9 - Surface density of electric charge multiplied by velocity + + + ThermalConductivity + At a point fixed in a medium with a temperature field, scalar quantity λ characterizing the ability of the medium to transmit heat through a surface element containing that point: φ = −λ grad T, where φ is the density of heat flow rate and T is thermodynamic temperature. + In an anisotropic medium, thermal conductivity is a tensor quantity. + ThermalConductivity + https://qudt.org/vocab/quantitykind/ThermalConductivity + https://www.wikidata.org/wiki/Q487005 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-38 + https://dbpedia.org/page/Thermal_conductivity + 5-9 + At a point fixed in a medium with a temperature field, scalar quantity λ characterizing the ability of the medium to transmit heat through a surface element containing that point: φ = −λ grad T, where φ is the density of heat flow rate and T is thermodynamic temperature. - + - - SpecificGibbsEnergy - Gibbs energy per unit mass. - SpecificGibbsEnergy - https://qudt.org/vocab/quantitykind/SpecificGibbsEnergy - https://www.wikidata.org/wiki/Q76360636 - 5-21.5 - Gibbs energy per unit mass. + + + MobilityRatio + Quotient of electron and hole mobility. + MobilityRatio + https://qudt.org/vocab/quantitykind/MobilityRatio + https://www.wikidata.org/wiki/Q106010255 + 12-31 + Quotient of electron and hole mobility. - + - + + - - + + T-1 L0 M0 I0 Θ-1 N0 J0 - - - - EnergyFluenceRate - In nuclear physics, time derivative of the energy fluence. - EnergyFluenceRate - https://qudt.org/vocab/quantitykind/EnergyFluenceRate - https://www.wikidata.org/wiki/Q98538655 - 10-47 - In nuclear physics, time derivative of the energy fluence. + + PerTemperatureTimeUnit + PerTemperatureTimeUnit - - - - TransformationLanguage - A construction language designed to transform some input text in a certain formal language into a modified output text that meets some specific goal. - TransformationLanguage - https://en.wikipedia.org/wiki/Transformation_language - A construction language designed to transform some input text in a certain formal language into a modified output text that meets some specific goal. - Tritium, XSLT, XQuery, STX, FXT, XDuce, CDuce, HaXml, XMLambda, FleXML + + + + CeramicSintering + CeramicSintering - - - - MaterialRelation - A material_relation can e.g. return a predefined number, return a database query, be an equation that depends on other physics_quantities. - An 'equation' that stands for a physical assumption specific to a material, and provides an expression for a 'physics_quantity' (the dependent variable) as function of other variables, physics_quantity or data (independent variables). - MaterialRelation - An 'equation' that stands for a physical assumption specific to a material, and provides an expression for a 'physics_quantity' (the dependent variable) as function of other variables, physics_quantity or data (independent variables). - The Lennard-Jones potential. -A force field. -An Hamiltonian. + + + + CriticalAndSupercriticalChromatography + + CriticalAndSupercriticalChromatography - - - - + + + - - T+4 L-2 M-1 I+2 Θ0 N0 J0 + + + + + + + + + + + + + + + + + + + + + - CapacitanceUnit - CapacitanceUnit - + Interpreter + The entity (or agent, or observer, or cognitive entity) who connects 'Sign', 'Interpretant' and 'Object'. + The interpreter is not the ontologist, being the ontologist acting outside the ontology at the meta-ontology level. - - - - ModulusOfImpedance - ModulusOfImpedance - https://qudt.org/vocab/quantitykind/ModulusOfImpedance - https://www.wikidata.org/wiki/Q25457909 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-44 - 6-51.4 +On the contrary, the interpreter is an agent recognized by the ontologist. The semiotic branch of the EMMO is the tool used by the ontologist to represent an interpreter's semiotic activity. + Interpreter + The entity (or agent, or observer, or cognitive entity) who connects 'Sign', 'Interpretant' and 'Object'. + For example, the ontologist may be interest in cataloguing in the EMMO how the same object (e.g. a cat) is addressed using different signs (e.g. cat, gatto, chat) by different interpreters (e.g. english, italian or french people). + +The same applies for the results of measurements: the ontologist may be interest to represent in the EMMO how different measurement processes (i.e. semiosis) lead to different quantitative results (i.e. signs) according to different measurement devices (i.e. interpreters). - + - - - FermiAnglularWaveNumber - angular wavenumber of electrons in states on the Fermi sphere - FermiAnglularRepetency - FermiAnglularWaveNumber - https://qudt.org/vocab/quantitykind/FermiAngularWavenumber - https://www.wikidata.org/wiki/Q105554303 - 12-9.2 - angular wavenumber of electrons in states on the Fermi sphere + + TotalCurrent + Sum of electric current and displacement current + TotalCurrent + https://qudt.org/vocab/quantitykind/TotalCurrent + https://www.wikidata.org/wiki/Q77679732 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-45 + 6-19.2 + Sum of electric current and displacement current - + - - FieldEmissionScanningElectronMicroscopy + + Profilometry - Field emission scanning electron microscopy (FE-SEM) is an advanced technology used to capture the microstructure image of the materials. FE-SEM is typically performed in a high vacuum because gas molecules tend to disturb the electron beam and the emitted secondary and backscattered electrons used for imaging. - FE-SEM - FieldEmissionScanningElectronMicroscopy - Field emission scanning electron microscopy (FE-SEM) is an advanced technology used to capture the microstructure image of the materials. FE-SEM is typically performed in a high vacuum because gas molecules tend to disturb the electron beam and the emitted secondary and backscattered electrons used for imaging. + Profilometry is a technique used to extract topographical data from a surface. This can be a single point, a line scan or even a full three dimensional scan. The purpose of profilometry is to get surface morphology, step heights and surface roughness. + Profilometry + Profilometry is a technique used to extract topographical data from a surface. This can be a single point, a line scan or even a full three dimensional scan. The purpose of profilometry is to get surface morphology, step heights and surface roughness. - - - - GammaSpectrometry - - Gamma-ray spectroscopy is the qualitative study of the energy spectra of gamma-ray sources, such as in the nuclear industry, geochemical investigation, and astrophysics.[1] Gamma-ray spectrometry, on the other hand, is the method used to acquire a quantitative spectrum measurement.[2] - -Most radioactive sources produce gamma rays, which are of various energies and intensities. When these emissions are detected and analyzed with a spectroscopy system, a gamma-ray energy spectrum can be produced. - -A detailed analysis of this spectrum is typically used to determine the identity and quantity of gamma emitters present in a gamma source, and is a vital tool in radiometric assay. The gamma spectrum is characteristic of the gamma-emitting nuclides contained in the source, just like in an optical spectrometer, the optical spectrum is characteristic of the material contained in a sample. - GammaSpectrometry - Gamma-ray spectroscopy is the qualitative study of the energy spectra of gamma-ray sources, such as in the nuclear industry, geochemical investigation, and astrophysics.[1] Gamma-ray spectrometry, on the other hand, is the method used to acquire a quantitative spectrum measurement.[2] - -Most radioactive sources produce gamma rays, which are of various energies and intensities. When these emissions are detected and analyzed with a spectroscopy system, a gamma-ray energy spectrum can be produced. - -A detailed analysis of this spectrum is typically used to determine the identity and quantity of gamma emitters present in a gamma source, and is a vital tool in radiometric assay. The gamma spectrum is characteristic of the gamma-emitting nuclides contained in the source, just like in an optical spectrometer, the optical spectrum is characteristic of the material contained in a sample. + + + + Ruby + Ruby - - - - - - - - - - - Operator - - The human operator who takes care of the whole characterisation method or sub-processes/stages. - Operator - The human operator who takes care of the whole characterisation method or sub-processes/stages. + + + + + StandardAbsoluteActivity + For a substance in a mixture, the absolute activity of the pure substance at the same temperature but at standard pressure. + StandardAbsoluteActivityInAMixture + StandardAbsoluteActivity + https://qudt.org/vocab/quantitykind/StandardAbsoluteActivity + https://www.wikidata.org/wiki/Q89406159 + 9-23 + For a substance in a mixture, the absolute activity of the pure substance at the same temperature but at standard pressure. - + - - Height - Minimum length of a straight line segment between a point and a reference line or reference surface. - Height - https://qudt.org/vocab/quantitykind/Height - https://www.wikidata.org/wiki/Q208826 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-01-21 - https://dbpedia.org/page/Height - 3-1.3 - Minimum length of a straight line segment between a point and a reference line or reference surface. - https://en.wikipedia.org/wiki/Height + + LinkedFlux + Magnetic flux the integration area of which is such that magnetic field lines cross it in the same orientation more than once. + LinkedFlux + https://qudt.org/vocab/quantitykind/MagneticFlux + https://www.wikidata.org/wiki/Q4374882 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-77 + 6-22.2 + Magnetic flux the integration area of which is such that magnetic field lines cross it in the same orientation more than once. - - - - QueryLanguage - A construction language used to make queries in databases and information systems. - QueryLanguage - A construction language used to make queries in databases and information systems. - SQL, SPARQL - https://en.wikipedia.org/wiki/Query_language + + + + + + + T-3 L0 M+1 I0 Θ-1 N0 J0 + + + ThermalTransmittanceUnit + ThermalTransmittanceUnit - - - - PrimaryData - - Data resulting of a pre-processing of raw data, applying corrections to normalize/harmonize, in order to prepare them for the post-processing. - PrimaryData - Data resulting of a pre-processing of raw data, applying corrections to normalize/harmonize, in order to prepare them for the post-processing. - Baseline subtraction - Noise reduction - X and Y axes correction + + + + + + + T+1 L0 M0 I0 Θ0 N0 J0 + + + TimeUnit + TimeUnit - - - - CharacterisationData - Represents every type of data that is produced during a characterisation process - CharacterisationData - Represents every type of data that is produced during a characterisation process + + + + ManufacturingSystem + A system arranged to setup a specific manufacturing process. + ManufacturingSystem + A system arranged to setup a specific manufacturing process. - + - + - - DissociationConstant - ratio of the number of dissociated molecules of a specified type to the total number of dissolved molecules of this type. - DissociationConstant - https://www.wikidata.org/wiki/Q898254 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-01-10 - ratio of the number of dissociated molecules of a specified type to the total number of dissolved molecules of this type. + + + Capacitance + The derivative of the electric charge of a system with respect to the electric potential. + ElectricCapacitance + Capacitance + http://qudt.org/vocab/quantitykind/Capacitance + 6-13 + The derivative of the electric charge of a system with respect to the electric potential. + https://doi.org/10.1351/goldbook.C00791 - - - - Smoke - Smoke is a solid aerosol made of particles emitted when a material undergoes combustion or pyrolysis. - Smoke - Smoke is a solid aerosol made of particles emitted when a material undergoes combustion or pyrolysis. + + + + + ThermalDiffusionRatio + ThermalDiffusionRatio + https://qudt.org/vocab/quantitykind/ThermalDiffusionRatio + https://www.wikidata.org/wiki/Q96249433 + 9-40.1 - - - - SolidAerosol - An aerosol composed of fine solid particles in air or another gas. - SolidAerosol - An aerosol composed of fine solid particles in air or another gas. + + + + + RelativePermittivity + Permittivity divided by electric constant. + RelativePermittivity + https://qudt.org/vocab/unit/PERMITTIVITY_REL + https://www.wikidata.org/wiki/Q4027242 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-12-13 + 6-15 + Permittivity divided by electric constant. - - - - - OsmoticCoefficientOfSolvent - Quantity characterizing the deviation of a solvent from ideal behavior. - OsmoticFactorOfSolvent - OsmoticCoefficientOfSolvent - https://qudt.org/vocab/quantitykind/OsmoticCoefficient - https://www.wikidata.org/wiki/Q5776102 - 9-27.2 - Quantity characterizing the deviation of a solvent from ideal behavior. - https://doi.org/10.1351/goldbook.O04342 + + + + + + + + + + + + + + + + + + + + + Cognition + IconSemiosis + Cognition - + - - - ResonanceEscapeProbability - In an infinite medium, the probability that a neutron slowing down will traverse all or some specified portion of the range of resonance energies without being absorbed. - ResonanceEscapeProbability - https://qudt.org/vocab/quantitykind/ResonanceEscapeProbability - https://www.wikidata.org/wiki/Q4108072 - 10-68 - In an infinite medium, the probability that a neutron slowing down will traverse all or some specified portion of the range of resonance energies without being absorbed. + + GyromagneticRatioOfTheElectron + Proportionality constant between the magnetic dipole moment and the angular momentum of the electron. + GyromagneticCoefficientOfTheElectron + MagnetogyricRatioOfTheElectron + GyromagneticRatioOfTheElectron + https://www.wikidata.org/wiki/Q97543076 + 10-12.2 + Proportionality constant between the magnetic dipole moment and the angular momentum of the electron. - + + + GreenUpQuark + GreenUpQuark + + + - - Probability - Probability is a dimensionless quantity that can attain values between 0 and 1; zero denotes the impossible event and 1 denotes a certain event. - The propability for a certain outcome, is the ratio between the number of events leading to the given outcome and the total number of events. - Probability - Probability is a dimensionless quantity that can attain values between 0 and 1; zero denotes the impossible event and 1 denotes a certain event. - https://doi.org/10.1351/goldbook.P04855 + + + + + + + + + + SpecificHeatCapacity + Heat capacity divided by mass. + SpecificHeatCapacity + https://qudt.org/vocab/quantitykind/SpecificHeatCapacity + https://www.wikidata.org/wiki/Q487756 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-48 + https://dbpedia.org/page/Specific_heat_capacity + 5-16.1 + Heat capacity divided by mass. + https://en.wikipedia.org/wiki/Specific_heat_capacity + https://doi.org/10.1351/goldbook.S05800 + + + + + + MeasurementTime + + The overall time needed to acquire the measurement data + MeasurementTime + The overall time needed to acquire the measurement data + + + + + + + + + + + + + + + Observation + A characterisation of an object with an actual interaction. + Observation + A characterisation of an object with an actual interaction. - + - T+2 L-3 M-1 I0 Θ0 N+1 J0 + T0 L+1 M+1 I0 Θ0 N0 J0 - AmountSquareTimePerMassVolumeUnit - AmountSquareTimePerMassVolumeUnit - - - - - - - MassFractionOfWater - Quantity of dimension 1 equal to u/(1 + u), where u is mass ratio of water to dry matter. - MassFractionOfWater - https://qudt.org/vocab/quantitykind/MassFractionOfWater - https://www.wikidata.org/wiki/Q76379025 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-63 - 5-31 - Quantity of dimension 1 equal to u/(1 + u), where u is mass ratio of water to dry matter. - - - - - - - MassFraction - Mass of a constituent divided by the total mass of all constituents in the mixture. - MassFraction - http://qudt.org/vocab/quantitykind/MassFraction - 9-11 - https://doi.org/10.1351/goldbook.M03722 + LengthMassUnit + LengthMassUnit - + - - Hazard + + Holder - Set of inherent properties of a substance, mixture of substances, or a process involving substances that, under production, usage, or disposal conditions, make it capable of causing adverse effects to organisms or the environment, depending on the degree of exposure; in other words, it is a source of danger. - Hazard - Set of inherent properties of a substance, mixture of substances, or a process involving substances that, under production, usage, or disposal conditions, make it capable of causing adverse effects to organisms or the environment, depending on the degree of exposure; in other words, it is a source of danger. - - - - - - - ReactorTimeConstant - Duration required for the neutron fluence rate in a reactor to change by the factor e when the fluence rate is rising or falling exponentially. - ReactorTimeConstant - https://qudt.org/vocab/quantitykind/ReactorTimeConstant - https://www.wikidata.org/wiki/Q99518950 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-07-04 - 10-79 - Duration required for the neutron fluence rate in a reactor to change by the factor e when the fluence rate is rising or falling exponentially. + An object which supports the specimen in the correct position for the characterisation process. + Holder + An object which supports the specimen in the correct position for the characterisation process. - + - T0 L0 M0 I+1 Θ0 N0 J0 + T+2 L-2 M-1 I+2 Θ0 N0 J0 - ElectricCurrentUnit - ElectricCurrentUnit + MagneticReluctanceUnit + MagneticReluctanceUnit - - - - - MeanDurationOfLife - Reciprocal of the decay constant λ. - MeanLifeTime - MeanDurationOfLife - https://qudt.org/vocab/quantitykind/MeanLifetime - https://www.wikidata.org/wiki/Q1758559 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-13 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-04-47 - 10-25 - Reciprocal of the decay constant λ. + + + + FORTRAN + FORTRAN - - - GreenDownAntiQuark - GreenDownAntiQuark + + + + Admittance + Inverse of the impendance. + ComplexAdmittance + Admittance + https://qudt.org/vocab/quantitykind/Admittance + https://www.wikidata.org/wiki/Q214518 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-51 + https://dbpedia.org/page/Admittance + 6-52.1 + Inverse of the impendance. - - - - - - - T-1 L+2 M+1 I0 Θ0 N-1 J0 - - - EnergyTimePerAmountUnit - EnergyTimePerAmountUnit + + + TauNeutrino + A neutrino belonging to the third generation of leptons. + TauNeutrino + A neutrino belonging to the third generation of leptons. + https://en.wikipedia.org/wiki/Tau_neutrino - + - - + - - T-1 L-2 M+1 I0 Θ0 N0 J0 + + - - MassFluxUnit - MassFluxUnit + + + + ParticleSourceDensity + Quotient of the mean rate of production of particles in a volume, and that volume. + ParticleSourceDensity + https://qudt.org/vocab/quantitykind/ParticleSourceDensity + https://www.wikidata.org/wiki/Q98915762 + 10-66 + Quotient of the mean rate of production of particles in a volume, and that volume. - - - - - - - - - - - PhysicsOfInteraction - - Set of physics principles (and associated governing equations) that describes the interaction between the sample and the probe. - PhysicsOfInteraction - Set of physics principles (and associated governing equations) that describes the interaction between the sample and the probe. - In x-ray diffraction, this is represented by the set of physics equations that describe the relation between the incident x-ray beam and the diffracted beam (the most simple form for this being the Bragg’s law). + + + + ContinuousCasting + ContinuousCasting - + - - MeasurementSystemAdjustment - - Activity which has the goal of adjusting/tuning a measing instrument, without performing a measurement on a reference sample (which is a calibration). -The output of this process can be a specific measurement parameter to be used in the characteriasation measurement process. - Set of operations carried out on a measuring system so that it provides prescribed indications corresponding to given values of a quantity being measured -NOTE 1 If there is any doubt that the context in which the term is being used is that of metrology, the long form -“adjustment of a measuring system” might be used. -NOTE 2 Types of adjustment of a measuring system include zero adjustment, offset adjustment, and span adjustment -(sometimes called “gain adjustment”). -NOTE 3 Adjustment of a measuring system should not be confused with calibration, which is sometimes a prerequisite -for adjustment. -NOTE 4 After an adjustment of a measuring system, the measuring system must usually be recalibrated. - --- International Vocabulary of Metrology(VIM) - MeasurementSystemAdjustment - Set of operations carried out on a measuring system so that it provides prescribed indications corresponding to given values of a quantity being measured -NOTE 1 If there is any doubt that the context in which the term is being used is that of metrology, the long form -“adjustment of a measuring system” might be used. -NOTE 2 Types of adjustment of a measuring system include zero adjustment, offset adjustment, and span adjustment -(sometimes called “gain adjustment”). -NOTE 3 Adjustment of a measuring system should not be confused with calibration, which is sometimes a prerequisite -for adjustment. -NOTE 4 After an adjustment of a measuring system, the measuring system must usually be recalibrated. - --- International Vocabulary of Metrology(VIM) - Activity which has the goal of adjusting/tuning a measing instrument, without performing a measurement on a reference sample (which is a calibration). -The output of this process can be a specific measurement parameter to be used in the characteriasation measurement process. - Adjustment + + AdsorptiveStrippingVoltammetry + A peak-shaped adsorptive stripping voltammogram is obtained. Peak current depends on time of accumulation, mass transport of analyte (stirring), scan rate and mode (linear or pulse), and analyte concentration in solution. AdSV is usually employed for analysis of organic compounds or metal complexes with organic ligands. Stripping is done by means of an anodic or a cathodic voltammetric scan (linear or pulse), during which the adsorbed compound is oxidized or reduced. + Stripping voltammetry involving pre-concentration by adsorption of the analyte (in contrast to electro-chemical accumulation). + AdSV + AdsorptiveStrippingVoltammetry + Stripping voltammetry involving pre-concentration by adsorption of the analyte (in contrast to electro-chemical accumulation). + https://doi.org/10.1515/pac-2018-0109 - - - - - - - - - - - SolidMixture - SolidMixture + + + + PhysicalLaw + A law that provides a connection between a property of the object and other properties, capturing a fundamental physical phenomena. + PhysicalLaw + A law that provides a connection between a property of the object and other properties, capturing a fundamental physical phenomena. - - - - Mixture - A Miixture is a material made up of two or more different substances which are physically (not chemically) combined. - Mixture - A Miixture is a material made up of two or more different substances which are physically (not chemically) combined. + + + + NaturalLaw + A scientific theory that focuses on a specific phenomena, for which a single statement (not necessariliy in mathematical form) can be expressed. + NaturalLaw + A scientific theory that focuses on a specific phenomena, for which a single statement (not necessariliy in mathematical form) can be expressed. - + + - - StandardChemicalPotential - StandardChemicalPotential - https://qudt.org/vocab/quantitykind/StandardChemicalPotential - https://www.wikidata.org/wiki/Q89333468 - 9-21 - https://doi.org/10.1351/goldbook.S05908 + StandardEquilibriumConstant + ThermodynamicEquilibriumConstant + StandardEquilibriumConstant + https://www.wikidata.org/wiki/Q95993378 + 9-32 + https://doi.org/10.1351/goldbook.S05915 + + + + + + Heteronuclear + A molecule composed of more than one element type. + Heteronuclear + A molecule composed of more than one element type. + Nitric oxide (NO) or carbon dioxide (CO₂). - + + + + + + + + + + + + + + - + - - - - - - - - - - - - + + - StateOfMatter - A superclass made as the disjoint union of all the form under which matter can exist. - In physics, a state of matter is one of the distinct forms in which matter can exist. Four states of matter are observable in everyday life: solid, liquid, gas, and plasma. - StateOfMatter - A superclass made as the disjoint union of all the form under which matter can exist. - In physics, a state of matter is one of the distinct forms in which matter can exist. Four states of matter are observable in everyday life: solid, liquid, gas, and plasma. - https://en.wikipedia.org/wiki/State_of_matter + Molecule + An atom_based state defined by an exact number of e-bonded atomic species and an electron cloud made of the shared electrons. + An entity is called essential if removing one direct part will lead to a change in entity class. +An entity is called redundand if removing one direct part will not lead to a change in entity class. + ChemicalSubstance + Molecule + An atom_based state defined by an exact number of e-bonded atomic species and an electron cloud made of the shared electrons. + H₂0, C₆H₁₂O₆, CH₄ + An entity is called essential if removing one direct part will lead to a change in entity class. +An entity is called redundand if removing one direct part will not lead to a change in entity class. + This definition states that this object is a non-periodic set of atoms or a set with a finite periodicity. +Removing an atom from the state will result in another type of atom_based state. +e.g. you cannot remove H from H₂0 without changing the molecule type (essential). However, you can remove a C from a nanotube (redundant). C60 fullerene is a molecule, since it has a finite periodicity and is made of a well defined number of atoms (essential). A C nanotube is not a molecule, since it has an infinite periodicity (redundant). - + + + + + + + + + + + MomentOfIntertia + Scalar measure of the rotational inertia with respect to a fixed axis of rotation. + MomentOfIntertia + https://qudt.org/vocab/quantitykind/MomentOfInertia + https://www.wikidata.org/wiki/Q165618 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-21 + 4-7 + Scalar measure of the rotational inertia with respect to a fixed axis of rotation. + https://doi.org/10.1351/goldbook.M04006 + + + - T+1 L-1 M0 I+1 Θ0 N0 J0 + T0 L+2 M+1 I0 Θ0 N0 J0 - ElectricChargePerLengthUnit - ElectricChargePerLengthUnit + MassAreaUnit + MassAreaUnit - + + + + CommercialProduct + An product that is ready for commercialisation. + Product + CommercialProduct + An product that is ready for commercialisation. + + + - - - - AngularMeasure - The abstract notion of angle. - AngularMeasure - https://qudt.org/vocab/quantitykind/Angle - https://www.wikidata.org/wiki/Q1357788 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=102-04-14 - 3-5 - The abstract notion of angle. - https://doi.org/10.1351/goldbook.A00346 + + + NuclearRadius + Conventional radius of sphere in which the nuclear matter is included, + NuclearRadius + https://qudt.org/vocab/quantitykind/NuclearRadius + https://www.wikidata.org/wiki/Q3535676 + 10-19.1 + Conventional radius of sphere in which the nuclear matter is included, - - - - GasSolidSuspension - A coarse dispersion of solid in a gas continuum phase. - GasSolidSuspension - A coarse dispersion of solid in a gas continuum phase. - Dust, sand storm. + + + + Hardening + Heat treatment process that generally produces martensite in the matrix. + Hardening + Heat treatment process that generally produces martensite in the matrix. - - - MuonNeutrino - A neutrino belonging to the second generation of leptons. - MuonNeutrino - A neutrino belonging to the second generation of leptons. - https://en.wikipedia.org/wiki/Muon_neutrino + + + + + StandardAbsoluteActivityOfSolvent + StandardAbsoluteActivityOfSolvent + https://www.wikidata.org/wiki/Q89556185 + 9-27.3 - + - - Signal - - According to UPAC Compendium of Chemical Terminology, a “signal” is “A representation of a quantity within an analytical instrument” (https://goldbook.iupac.org/terms/view/S05661 ). - Result (effect) of the interaction between the sample and the probe, which usually is a measurable and quantifiable quantity. - Signal is usually emitted from a characteristic “emission” volume, which can be different from the sample/probe “interaction” volume and can be usually quantified using proper physics equations and/or modelling of the interaction mechanisms. - Signal - According to UPAC Compendium of Chemical Terminology, a “signal” is “A representation of a quantity within an analytical instrument” (https://goldbook.iupac.org/terms/view/S05661 ). - Result (effect) of the interaction between the sample and the probe, which usually is a measurable and quantifiable quantity. - Signal is usually emitted from a characteristic “emission” volume, which can be different from the sample/probe “interaction” volume and can be usually quantified using proper physics equations and/or modelling of the interaction mechanisms. + + Chronocoulometry + Direct coulometry at controlled potential in which the electric charge passed after the application of a potential step perturbation is measured as a function of time (Q-t curve). Chronocoulometry provides the same information that is provided by chronoamperometry, since it is based on the integration of the I-t curve. Nevertheless, chronocoulometry offers important experimental advantages, such as (i) the measured signal usually increases with time and hence the later parts of the transient can be detected more accurately, (ii) a better signal-to-noise ratio can be achieved, and (iii) other contributions to overall charge passed as a function of time can be discriminated from those due to the diffusion of electroactive substances. + Chronocoulometry + Direct coulometry at controlled potential in which the electric charge passed after the application of a potential step perturbation is measured as a function of time (Q-t curve). Chronocoulometry provides the same information that is provided by chronoamperometry, since it is based on the integration of the I-t curve. Nevertheless, chronocoulometry offers important experimental advantages, such as (i) the measured signal usually increases with time and hence the later parts of the transient can be detected more accurately, (ii) a better signal-to-noise ratio can be achieved, and (iii) other contributions to overall charge passed as a function of time can be discriminated from those due to the diffusion of electroactive substances. + https://doi.org/10.1515/pac-2018-0109 - + + + + GravitySintering + ISO 3252:2019 Powder metallurgy +loose-powder sintering, gravity sintering: sintering of uncompacted powder + Loose-powderSintering + PressurelessSintering + GravitySintering + + + + + + + ConstitutiveProcess + A constitutive process is a process that is holistically relevant for the definition of the whole. + A process which is an holistic spatial part of an object. + ConstitutiveProcess + A process which is an holistic spatial part of an object. + Blood circulation in a human body. + A constitutive process is a process that is holistically relevant for the definition of the whole. + + + + + + + ElectronAffinity + energy difference between an electron at rest at infinity and an electron at the lowest level of the conduction band in an insulator or semiconductor + ElectronAffinity + https://qudt.org/vocab/quantitykind/ElectronAffinity + https://www.wikidata.org/wiki/Q105846486 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-06-22 + 12-25 + energy difference between an electron at rest at infinity and an electron at the lowest level of the conduction band in an insulator or semiconductor + + + - - - - - - - - - - - - - - - - - TopQuark - TopQuark - https://en.wikipedia.org/wiki/Top_quark + GreenBottomAntiQuark + GreenBottomAntiQuark - - - - - - - - - - - - - Uncoded - A conventional that provides no possibility to infer the characteristics of the object to which it refers. - Uncoded - A conventional that provides no possibility to infer the characteristics of the object to which it refers. - A random generated id for a product. + + + NumericalData + Data that can be decoded under a quantitative schema and also associated with a graphical number symbols. + NumericalData + Data that can be decoded under a quantitative schema and also associated with a graphical number symbols. + + + + + RedCharmQuark + RedCharmQuark - + - - - VonKlitzingConstant - Resistance quantum. - The von Klitzing constant is defined as Planck constant divided by the square of the elementary charge. - VonKlitzingConstant - http://qudt.org/vocab/constant/VonKlitzingConstant - The von Klitzing constant is defined as Planck constant divided by the square of the elementary charge. + + + + + + + + + VolumicCrossSection + In nuclear physics, product of the number density of atoms of a given type and the cross section. + MacroscopicCrossSection + VolumicCrossSection + https://qudt.org/vocab/quantitykind/MacroscopicCrossSection + https://www.wikidata.org/wiki/Q98280520 + 10-42.1 + In nuclear physics, product of the number density of atoms of a given type and the cross section. + https://doi.org/10.1351/goldbook.M03674 - - - - AdsorptiveStrippingVoltammetry - A peak-shaped adsorptive stripping voltammogram is obtained. Peak current depends on time of accumulation, mass transport of analyte (stirring), scan rate and mode (linear or pulse), and analyte concentration in solution. AdSV is usually employed for analysis of organic compounds or metal complexes with organic ligands. Stripping is done by means of an anodic or a cathodic voltammetric scan (linear or pulse), during which the adsorbed compound is oxidized or reduced. - Stripping voltammetry involving pre-concentration by adsorption of the analyte (in contrast to electro-chemical accumulation). - AdSV - AdsorptiveStrippingVoltammetry - Stripping voltammetry involving pre-concentration by adsorption of the analyte (in contrast to electro-chemical accumulation). - https://doi.org/10.1515/pac-2018-0109 + + + + + + RollingResistance + Force resisting the motion when a body (such as a ball, tire, or wheel) rolls on a surface. + RollingDrag + RollingFrictionForce + RollingResistance + https://www.wikidata.org/wiki/Q914921 + 4-9.5 + Force resisting the motion when a body (such as a ball, tire, or wheel) rolls on a surface. - + - - - CanonicalPartitionFunction - CanonicalPartitionFunction - https://qudt.org/vocab/quantitykind/CanonicalPartitionFunction - https://www.wikidata.org/wiki/Q96142389 - 9-35.2 + + + RollingResistanceFactor + Quotient of tangential and normal component of the force applied to a body which is rolling at constant speed over a surface. + RollingResistanceFactor + https://www.wikidata.org/wiki/Q91738044 + 4-23.3 + Quotient of tangential and normal component of the force applied to a body which is rolling at constant speed over a surface. - - - - - CharacterisationProperty - - The characterisation property is the investigate property or behaviour of a sample. It is derived from the secondary data, usually after classification or quantification (manually or by a model). - CharacterisationProperty - The characterisation property is the investigate property or behaviour of a sample. It is derived from the secondary data, usually after classification or quantification (manually or by a model). + + + + + LiquidSol + A type of sol in the form of one solid dispersed in liquid. + LiquidSol + A type of sol in the form of one solid dispersed in liquid. - - - - FormingFromPulp - FormingFromPulp + + + + + IterativeStep + A workflow whose output ca be used as input for another workflow of the same type, iteratively, within the framework of a larger workflow. + IterativeStep + A workflow whose output ca be used as input for another workflow of the same type, iteratively, within the framework of a larger workflow. + Jacobi method numerical step, involving the multiplication between a matrix A and a vector x, whose result is used to update the vector x. - + - - - KineticFrictionFactor - DynamicFrictionFactor - KineticFrictionFactor - https://www.wikidata.org/wiki/Q73695445 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-32 - 4-23.2 + + + MultiplicationFactor + Quotient of the total number of fission or fission-dependent neutrons produced in the duration of a time interval and the total number of neutrons lost by absorption and leakage in that duration. + MultiplicationFactor + https://qudt.org/vocab/quantitykind/MultiplicationFactor + https://www.wikidata.org/wiki/Q99440471 + 10-78.1 + Quotient of the total number of fission or fission-dependent neutrons produced in the duration of a time interval and the total number of neutrons lost by absorption and leakage in that duration. - - - - - CoefficientOfFriction - Dimensionless scalar value which describes the ratio of the force of friction between two bodies and the force pressing them together; depends on the materials used, ranges from near zero to greater than one. - FrictionCoefficient - FrictionFactor - CoefficientOfFriction - https://www.wikidata.org/wiki/Q1932524 - Dimensionless scalar value which describes the ratio of the force of friction between two bodies and the force pressing them together; depends on the materials used, ranges from near zero to greater than one. - https://doi.org/10.1351/goldbook.F02530 + + + + + PreparedSample + + The sample after a preparation process. + PreparedSample + The sample after a preparation process. - + - + - - AbsorbedDoseRate - Differential quotient of the absorbed dose with respect to time. - AbsorbedDoseRate - https://qudt.org/vocab/quantitykind/AbsorbedDoseRate - https://www.wikidata.org/wiki/Q69428958 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-12-07 - 10-84 - Differential quotient of the absorbed dose with respect to time. + + ElectronDensity + Number of electrons in conduction band per volume. + ElectronDensity + https://qudt.org/vocab/quantitykind/ElectronDensity + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=705-06-05 + 12-29.1 + Number of electrons in conduction band per volume. - - - CausalConvexSystem - A CausalSystem whose quantum parts are all bonded to the rest of the system. - It is natural to define entities made or more than one smaller parts according to some unity criteria. One of the most general one applicable to causal systems is to ask that all the quantum parts of the system are bonded to the rest. -In other words, causal convexity excludes all quantums that leave the system (no more interacting), or that are not yet part of it (not yet interacting). -So, a photon leaving a body is not part of the body as convex system, while a photon the is carrier of electromagnetic interaction between two molecular parts of the body, is part of the convex body. - CausalConvexSystem - It is natural to define entities made or more than one smaller parts according to some unity criteria. One of the most general one applicable to causal systems is to ask that all the quantum parts of the system are bonded to the rest. -In other words, causal convexity excludes all quantums that leave the system (no more interacting), or that are not yet part of it (not yet interacting). -So, a photon leaving a body is not part of the body as convex system, while a photon the is carrier of electromagnetic interaction between two molecular parts of the body, is part of the convex body. - A CausalSystem whose quantum parts are all bonded to the rest of the system. + + + + Drilling + machining with a circular cutting movement in which the axis of rotation of the tool and the axis of the internal surface to be produced are identical and the feed movement is in the direction of this axis. The axis of rotation of the cutting movement maintains its position relative to the workpiece independently of the feed movement (axis of rotation workpiece-bound). + Bohren + Drilling - - - - - SourceCode - A programming language entity expressing a formal detailed plan of what a software is intended to do. - A source code is the companion of an application, being it the entity used to generate the application list of CPU executable instructions. - SourceCode - A programming language entity expressing a formal detailed plan of what a software is intended to do. - A source code is the companion of an application, being it the entity used to generate the application list of CPU executable instructions. - Source code (also referred to as source or code) is the version of software as it is originally written (i.e., typed into a computer) by a human in plain text (i.e., human readable alphanumeric characters). + + + + + + + T-1 L+1 M+1 I0 Θ0 N0 J0 + + + MomentumUnit + MomentumUnit - + + + AnalogicalIcon + An icon that focus on HOW the object works. + An icon that represents the internal logical structure of the object. + AnalogicalIcon + An icon that represents the internal logical structure of the object. + A physics equation is replicating the mechanisms internal to the object. + Electrical diagram is diagrammatic and resemblance + MODA and CHADA are diagrammatic representation of a simulation or a characterisation workflow. + An icon that focus on HOW the object works. + The subclass of icon inspired by Peirceian category (b) the diagram, whose internal relations, mainly dyadic or so taken, represent by analogy (with the same logic) the relations in something (e.g. math formula, geometric flowchart). + + + + + + + ThermalUtilizationFactor + In an infinite medium, the quotient of the number of thermal neutrons absorbed in a fissionable nuclide or in a nuclear fuel, as specified, and the total number of thermal neutrons absorbed. + ThermalUtilizationFactor + https://qudt.org/vocab/quantitykind/ThermalUtilizationFactor + https://www.wikidata.org/wiki/Q99197650 + 10-76 + In an infinite medium, the quotient of the number of thermal neutrons absorbed in a fissionable nuclide or in a nuclear fuel, as specified, and the total number of thermal neutrons absorbed. + + + - T0 L-2 M0 I0 Θ0 N0 J+1 + T0 L0 M0 I+1 Θ0 N0 J0 - LuminanceUnit - LuminanceUnit + ElectricCurrentUnit + ElectricCurrentUnit - - - - SecondaryData - - Data resulting from the application of post-processing or model generation to other data. - Elaborated data - SecondaryData - Data resulting from the application of post-processing or model generation to other data. - Deconvoluted curves - Intensity maps + + + + + + + T-3 L+4 M+1 I0 Θ0 N0 J0 + + + PowerAreaUnit + PowerAreaUnit - - - - - Extrusion - Extrusion + + + + + + + T-3 L+1 M0 I0 Θ0 N0 J0 + + + LengthPerCubeTimeUnit + LengthPerCubeTimeUnit - - - - NanoMaterial - Nanomaterials are Materials possessing, at minimum, one external dimension measuring 1-100nm - NanoMaterial - Nanomaterials are Materials possessing, at minimum, one external dimension measuring 1-100nm + + + + SpinQuantumNumber + Characteristic quantum number s of a particle, related to its spin. + SpinQuantumNumber + https://qudt.org/vocab/quantitykind/SpinQuantumNumber + https://www.wikidata.org/wiki/Q3879445 + 10-13.5 + Characteristic quantum number s of a particle, related to its spin. - - - - SizeDefinedMaterial - SizeDefinedMaterial + + + + + PhaseDifference + Under sinusoidal conditions, phase difference between the voltage applied to a linear two-terminal element or two-terminal circuit and the electric current in the element or circuit. + DisplacementAngle + PhaseDifference + https://www.wikidata.org/wiki/Q97222919 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-11-48 + 6-48 + Under sinusoidal conditions, phase difference between the voltage applied to a linear two-terminal element or two-terminal circuit and the electric current in the element or circuit. - - - - LowPressureCasting - LowPressureCasting + + + RedUpAntiQuark + RedUpAntiQuark - + - - LaserCutting - LaserCutting + + HandlingDevice + HandlingDevice - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - RedAntiQuark - RedAntiQuark + + + + + BohrRadius + Radius of the electron orbital in the hydrogen atom in its ground state in the Bohr model of the atom. + BohrRadius + https://qudt.org/vocab/constant/BohrRadius + https://www.wikidata.org/wiki/Q652571 + 10-6 + Radius of the electron orbital in the hydrogen atom in its ground state in the Bohr model of the atom. + https://doi.org/10.1351/goldbook.B00693 - + - + + + + + + + - CurieTemperature - Critical thermodynamic temperature of a ferromagnet. - CurieTemperature - https://qudt.org/vocab/quantitykind/CurieTemperature - https://www.wikidata.org/wiki/Q191073 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-12-51 - 12-35.1 - Critical thermodynamic temperature of a ferromagnet. - - - - - - ShearOrTorsionTesting - - ShearOrTorsionTesting - - - - - SpatialTile - A direct part that is obtained by partitioning a whole purely in spatial parts. - SpatialTile - A direct part that is obtained by partitioning a whole purely in spatial parts. + LatticeVector + translation vector that maps the crystal lattice on itself + LatticeVector + https://qudt.org/vocab/quantitykind/LatticeVector + https://www.wikidata.org/wiki/Q105435234 + 12-1.1 + translation vector that maps the crystal lattice on itself - - - GreenStrangeQuark - GreenStrangeQuark + + + + + Lethargy + Natural logarithm of the quotient of a reference energy and the kinetic energy of a neutron. + Lethargy + https://qudt.org/vocab/quantitykind/Lethargy + https://www.wikidata.org/wiki/Q25508781 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-07-01 + 10-69 + Natural logarithm of the quotient of a reference energy and the kinetic energy of a neutron. - - - ProcedureUnit - A reference unit provided by a measurement procedure. - Procedure units and measurement units are disjoint. - MeasurementProcedure - ProcedureUnit - A reference unit provided by a measurement procedure. - Rockwell C hardness of a given sample (150 kg load): 43.5HRC(150 kg) - Procedure units and measurement units are disjoint. + + + + + + + + + + Torque + Even though torque has the same physical dimension as energy, it is not of the same kind and can not be measured with energy units like joule or electron volt. + The effectiveness of a force to produce rotation about an axis, measured by the product of the force and the perpendicular distance from the line of action of the force to the axis. + Torque + http://qudt.org/vocab/quantitykind/Torque + 4-12.2 + The effectiveness of a force to produce rotation about an axis, measured by the product of the force and the perpendicular distance from the line of action of the force to the axis. + https://doi.org/10.1351/goldbook.T06400 - + - - - HyperfineTransitionFrequencyOfCs - The frequency standard in the SI system in which the photon absorption by transitions between the two hyperfine ground states of caesium-133 atoms are used to control the output frequency. - -It defines the base unit second in the SI system. - HyperfineTransitionFrequencyOfCs - The frequency standard in the SI system in which the photon absorption by transitions between the two hyperfine ground states of caesium-133 atoms are used to control the output frequency. - -It defines the base unit second in the SI system. + + + ReactionEnergy + In a nuclear reaction, sum of the kinetic energies and photon energies of the reaction products minus the sum of the kinetic and photon energies of the reactants. + ReactionEnergy + https://qudt.org/vocab/quantitykind/ReactionEnergy + https://www.wikidata.org/wiki/Q98164745 + 10-37.1 + In a nuclear reaction, sum of the kinetic energies and photon energies of the reaction products minus the sum of the kinetic and photon energies of the reactants. - - - - ThermalSprayingForming - ThermalSprayingForming + + + BlueTopAntiQuark + BlueTopAntiQuark - + - - - - - - - - - - - - ArithmeticExpression - ArithmeticExpression - 2+2 + + ArithmeticEquation + ArithmeticEquation + 1 + 1 = 2 + + + + + + LuminousEfficacyOf540THzRadiation + Defines the Candela base unit in the SI system. + The luminous efficacy of monochromatic radiation of frequency 540 × 10 12 Hz, K cd , is a technical constant that gives an exact numerical relationship between the purely physical characteristics of the radiant power stimulating the human eye (W) and its photobiological response defined by the luminous flux due to the spectral responsivity of a standard observer (lm) at a frequency of 540 × 10 12 hertz. + LuminousEfficacyOf540THzRadiation + The luminous efficacy of monochromatic radiation of frequency 540 × 10 12 Hz, K cd , is a technical constant that gives an exact numerical relationship between the purely physical characteristics of the radiant power stimulating the human eye (W) and its photobiological response defined by the luminous flux due to the spectral responsivity of a standard observer (lm) at a frequency of 540 × 10 12 hertz. - - - - - - - - - - - - - - MassNumber - Number of nucleons in an atomic nucleus. - AtomicMassNumber - NucleonNumber - MassNumber - http://qudt.org/vocab/quantitykind/MassNumber - Number of nucleons in an atomic nucleus. + + + BlueBottomAntiQuark + BlueBottomAntiQuark - - - - - - - - - - - - - - + + - - + + + + - - + + + + + - Declaration - ConventionalSemiosis - Declaration + Meson + Hadronic subatomic particles composed of an equal number of quarks and antiquarks bound together by strong interactions. + Most mesons are composed of one quark and one antiquark. + Meson + Hadronic subatomic particles composed of an equal number of quarks and antiquarks bound together by strong interactions. + Most mesons are composed of one quark and one antiquark. + https://en.wikipedia.org/wiki/Meson - - - - - LongRangeOrderParameter - Fraction of atoms in an Ising ferromagnet having magnetic moments in one direction, minus the fraction having magnetic moments in the opposite direction. - LongRangeOrderParameter - https://qudt.org/vocab/quantitykind/Long-RangeOrderParameter - https://www.wikidata.org/wiki/Q105496124 - 12-5.2 - Fraction of atoms in an Ising ferromagnet having magnetic moments in one direction, minus the fraction having magnetic moments in the opposite direction. + + + HybridMatter + Matter composed of both matter and antimatter fundamental particles. + HybridMatter + Matter composed of both matter and antimatter fundamental particles. - - - - - AverageEnergyLossPerElementaryChargeProduced - Quotient of the initial kinetic energy Ek of an ionizing charged particle and the total ionization Ni produced by that particle. - AverageEnergyLossPerElementaryChargeProduced - https://qudt.org/vocab/quantitykind/AverageEnergyLossPerElementaryChargeProduced - https://www.wikidata.org/wiki/Q98793042 - 10-60 - Quotient of the initial kinetic energy Ek of an ionizing charged particle and the total ionization Ni produced by that particle. + + + ProcessingReproducibility + + Description of performed statistical analysis to check for data reproducibility (e.g. easily reproducible for everyone, reproducible for a domain expert, reproducible only for Data processing Expert) + ProcessingReproducibility + Description of performed statistical analysis to check for data reproducibility (e.g. easily reproducible for everyone, reproducible for a domain expert, reproducible only for Data processing Expert) - + - - - OsmoticPressure - Measure of the tendency of a solution to take in pure solvent by osmosis. - OsmoticPressure - https://qudt.org/vocab/quantitykind/OsmoticPressure - https://www.wikidata.org/wiki/Q193135 - 9-28 - Measure of the tendency of a solution to take in pure solvent by osmosis. - https://doi.org/10.1351/goldbook.O04344 + + Strain + Change of the relative positions of parts of a body, excluding a displacement of the body as a whole. + Strain + http://qudt.org/vocab/quantitykind/Strain + 4-17.1 + Change of the relative positions of parts of a body, excluding a displacement of the body as a whole. - + + + + Rolling + Continuous or stepwise pressure forming with one or more rotating tools (rollers), without or with additional tools, e.g. plugs or mandrels, rods, guide tools + Walzen + Rolling + + + + + + + SubProcess + A process which is an holistic spatial part of a process. + In the EMMO the relation of participation to a process falls under mereotopology. + +Since topological connection means causality, then the only way for a real world object to participate to a process is to be a part of it. + SubProcess + A process which is an holistic spatial part of a process. + Breathing is a subprocess of living for a human being. + In the EMMO the relation of participation to a process falls under mereotopology. + +Since topological connection means causality, then the only way for a real world object to participate to a process is to be a part of it. + + + - - - - - - - - - ElectricChargeDensity - Electric charge per volume. - VolumeElectricCharge - ElectricChargeDensity - https://qudt.org/vocab/quantitykind/ElectricChargeDensity - https://www.wikidata.org/wiki/Q69425629 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-07 - 6-3 - Electric charge per volume. - https://doi.org/10.1351/goldbook.C00988 + + ApparentPower + RMS value voltage multiplied by rms value of electric current. + ApparentPower + https://qudt.org/vocab/quantitykind/ApparentPower + https://www.wikidata.org/wiki/Q1930258 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-11-41 + 6-57 + RMS value voltage multiplied by rms value of electric current. - + - - - - - T-2 L+2 M0 I0 Θ-1 N0 J0 - - - EntropyPerMassUnit - EntropyPerMassUnit + + + Number + A number individual provides the link between the ontology and the actual data, through the data property hasNumericalValue. + A number is actually a string (e.g. 1.4, 1e-8) of numerical digits and other symbols. However, in order not to increase complexity of the taxonomy and relations, here we take a number as an "atomic" object, without decomposit it in digits (i.e. we do not include digits in the EMMO as alphabet for numbers). + A numerical data value. + In math usually number and numeral are distinct concepts, the numeral being the symbol or a composition of symbols (e.g. 3.14, 010010, three) and the number is the idea behind it. +More than one numeral stands for the same number. +In the EMMO abstract entities do not exists, and numbers are simply defined by other numerals, so that a number is the class of all the numerals that are equivalent (e.g. 3 and 0011 are numerals that stands for the same number). +Or alternatively, an integer numeral may also stands for a set of a specific cardinality (e.g. 3 stands for a set of three apples). Rational and real numbers are simply a syntactic arrangment of integers (digits, in decimal system). +The fact that you can't give a name to a number without using a numeral or, in case of positive integers, without referring to a real world objects set with specific cardinality, suggests that the abstract concept of number is not a concept that can be practically used. +For these reasons, the EMMO will consider numerals and numbers as the same concept. + Numeral + Number + A numerical data value. - + + + + UTF8 + UTF8 + + + + + RedDownQuark + RedDownQuark + + + - - - - - - - - - Exposure - Absolute value of the electric charge of ions produced in dry air by X- or gamma radiation per mass of air. - Exposure - https://qudt.org/vocab/quantitykind/Exposure - https://www.wikidata.org/wiki/Q336938 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-32 - 10-88 - Absolute value of the electric charge of ions produced in dry air by X- or gamma radiation per mass of air. + + + DragForce + Retarding force on a body moving in a fluid. + DragForce + https://www.wikidata.org/wiki/Q206621 + 4-9.6 + Retarding force on a body moving in a fluid. - - - - URN - The term "Uniform Resource Name" (URN) has been used historically to refer to both URIs under the "urn" scheme [RFC2141], which are required to remain globally unique and persistent even when the resource ceases to exist or becomes unavailable, and to any other URI with the properties of a name. - URN - The term "Uniform Resource Name" (URN) has been used historically to refer to both URIs under the "urn" scheme [RFC2141], which are required to remain globally unique and persistent even when the resource ceases to exist or becomes unavailable, and to any other URI with the properties of a name. + + + + MachineCell + A group of machineries used to process a group of similar parts. + Is not simply a collection of machineries, since the connection between them is due to the parallel flow of processed parts that comes from a unique source and ends into a common repository. + MachineCell + A group of machineries used to process a group of similar parts. - + + + + Measurer + An observer that makes use of a measurement tool and provides a quantitative property. + Measurer + An observer that makes use of a measurement tool and provides a quantitative property. + + + - - HardwareModel + + OpticalMicroscopy - HardwareModel + Optical microscopy is a technique used to closely view a sample through the magnification of a lens with visible light + OpticalMicroscopy + Optical microscopy is a technique used to closely view a sample through the magnification of a lens with visible light - + + + SpatialTile + A direct part that is obtained by partitioning a whole purely in spatial parts. + SpatialTile + A direct part that is obtained by partitioning a whole purely in spatial parts. + + + + + + StandardChemicalPotential + StandardChemicalPotential + https://qudt.org/vocab/quantitykind/StandardChemicalPotential + https://www.wikidata.org/wiki/Q89333468 + 9-21 + https://doi.org/10.1351/goldbook.S05908 + + + + - T0 L0 M-1 I0 Θ0 N0 J0 + T0 L+2 M0 I0 Θ0 N0 J0 - ReciprocalMassUnit - ReciprocalMassUnit + AreaUnit + AreaUnit - - + + + + JavaScript + JavaScript + + + + - - + + - - - ElectricDipoleMoment - An electric dipole, vector quantity of magnitude equal to the product of the positive charge and the distance between the charges and directed from the negative charge to the positive charge. - ElectricDipoleMoment - http://qudt.org/vocab/quantitykind/ElectricDipoleMoment - https://www.wikidata.org/wiki/Q735135 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-35 - 6-6 - An electric dipole, vector quantity of magnitude equal to the product of the positive charge and the distance between the charges and directed from the negative charge to the positive charge. - https://doi.org/10.1351/goldbook.E01929 + + MeasurementResult + A measurement result generally contains “relevant information” about the set of measured quantity properties, such that some may be more representative of the measured quantity than others. This may be expressed in the form of a probability density function (pdf). + Result of a measurement. + +A set of quantites being attributed to a measurand (measured quantitative property) together with any other available relevant information, like measurement uncertainty. + +-- VIM + MeasurementResult + Result of a measurement. + +A set of quantites being attributed to a measurand (measured quantitative property) together with any other available relevant information, like measurement uncertainty. + +-- VIM + measurement result + A measurement result generally contains “relevant information” about the set of measured quantity properties, such that some may be more representative of the measured quantity than others. This may be expressed in the form of a probability density function (pdf). + A measurement result has the measured quantity, measurement uncertainty and other relevant attributes as holistic parts. - + - - ScanningTunnelingMicroscopy + + Impedimetry - Scanning Tunneling Microscopy, or STM, is an imaging technique used to obtain ultra-high resolution images at the atomic scale, without using light or electron beams. - STM - ScanningTunnelingMicroscopy - Scanning Tunneling Microscopy, or STM, is an imaging technique used to obtain ultra-high resolution images at the atomic scale, without using light or electron beams. + measurement principle in which the complex electric impedance of a system is measured, usually as a function of a small amplitude sinusoidal electrode potential + Impedimetry + measurement principle in which the complex electric impedance of a system is measured, usually as a function of a small amplitude sinusoidal electrode potential + https://doi.org/10.1515/pac-2018-0109 - - - - - - - ThermodynamicCriticalMagneticFluxDensity - ThermodynamicCriticalMagneticFluxDensity - https://qudt.org/vocab/quantitykind/ThermodynamicCriticalMagneticFluxDensity - https://www.wikidata.org/wiki/Q106103200 - 12-36.1 + + + Naming + A declaration that provides a sign for an object that is independent from any assignment rule. + Naming + A declaration that provides a sign for an object that is independent from any assignment rule. + A unique id attached to an entity. - - - - - - - - - - - MagneticFluxDensity - Often denoted B. - Strength of the magnetic field. - MagneticInduction - MagneticFluxDensity - http://qudt.org/vocab/quantitykind/MagneticFluxDensity - https://www.wikidata.org/wiki/Q30204 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-19 - 6-21 - Strength of the magnetic field. - https://doi.org/10.1351/goldbook.M03686 + + + BlueTopQuark + BlueTopQuark - - - - - UpperCriticalMagneticFluxDensity - For type II superconductors, the threshold magnetic flux density for disappearance of bulk superconductivity. - UpperCriticalMagneticFluxDensity - https://qudt.org/vocab/quantitykind/UpperCriticalMagneticFluxDensity - https://www.wikidata.org/wiki/Q106127634 - 12-36.3 - For type II superconductors, the threshold magnetic flux density for disappearance of bulk superconductivity. + + + + CharacterisationComponent + + CharacterisationComponent - + - - - LowerCriticalMagneticFluxDensity - For type II superconductors, the threshold magnetic flux density for magnetic flux entering the superconductor. - LowerCriticalMagneticFluxDensity - https://qudt.org/vocab/quantitykind/LowerCriticalMagneticFluxDensity - https://www.wikidata.org/wiki/Q106127355 - 12-36.2 - For type II superconductors, the threshold magnetic flux density for magnetic flux entering the superconductor. + + + + + T-3 L0 M+1 I-1 Θ0 N0 J0 + + + ElectricPotentialPerAreaUnit + ElectricPotentialPerAreaUnit - + - - CommercialProduct - An product that is ready for commercialisation. - Product - CommercialProduct - An product that is ready for commercialisation. + + TransientLiquidPhaseSintering + TransientLiquidPhaseSintering - + - + + - - + + T-2 L+2 M0 I0 Θ-1 N0 J0 - - - - Magnetization - At a given point within a domain of quasi-infinitesimal volume V, vector quantity equal to the magnetic area moment m of the substance contained within the domain divided by the volume V. - Magnetization - https://qudt.org/vocab/quantitykind/Magnetization - https://www.wikidata.org/wiki/Q856711 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-52 - 6-24 - At a given point within a domain of quasi-infinitesimal volume V, vector quantity equal to the magnetic area moment m of the substance contained within the domain divided by the volume V. + + EntropyPerMassUnit + EntropyPerMassUnit - + - QualityFactor - Factor taking into account health effects in the determination of the dose equivalent. - QualityFactor - https://qudt.org/vocab/quantitykind/DoseEquivalentQualityFactor - https://www.wikidata.org/wiki/Q2122099 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-14-03 - 10-82 - Factor taking into account health effects in the determination of the dose equivalent. + RelativeMassExcess + Quotient of mass excess and the unified atomic mass constant. + RelativeMassExcess + https://qudt.org/vocab/quantitykind/RelativeMassExcess + https://www.wikidata.org/wiki/Q98038610 + 10-22.1 + Quotient of mass excess and the unified atomic mass constant. - + - T0 L-2 M+1 I0 Θ+1 N0 J0 + T0 L-3 M0 I0 Θ0 N-1 J0 - TemperatureMassPerAreaUnit - TemperatureMassPerAreaUnit + ReciprocalAmountPerVolumeUnit + ReciprocalAmountPerVolumeUnit + + + + + + + + + T0 L-2 M0 I0 Θ0 N0 J0 + + + PerAreaUnit + PerAreaUnit - + + - - PhaseDifference - Under sinusoidal conditions, phase difference between the voltage applied to a linear two-terminal element or two-terminal circuit and the electric current in the element or circuit. - DisplacementAngle - PhaseDifference - https://www.wikidata.org/wiki/Q97222919 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-11-48 - 6-48 - Under sinusoidal conditions, phase difference between the voltage applied to a linear two-terminal element or two-terminal circuit and the electric current in the element or circuit. + LossFactor + Inverse of the quality factor. + LossFactor + https://qudt.org/vocab/quantitykind/LossFactor + https://www.wikidata.org/wiki/Q79468728 + 6-54 + Inverse of the quality factor. - - - - LiquidSolidSuspension - A coarse dispersion of solids in a liquid continuum phase. - LiquidSolidSuspension - A coarse dispersion of solids in a liquid continuum phase. - Mud + + + + TransformationLanguage + A construction language designed to transform some input text in a certain formal language into a modified output text that meets some specific goal. + TransformationLanguage + https://en.wikipedia.org/wiki/Transformation_language + A construction language designed to transform some input text in a certain formal language into a modified output text that meets some specific goal. + Tritium, XSLT, XQuery, STX, FXT, XDuce, CDuce, HaXml, XMLambda, FleXML - - + + - - + + - - MeasurementResult - A measurement result generally contains “relevant information” about the set of measured quantity properties, such that some may be more representative of the measured quantity than others. This may be expressed in the form of a probability density function (pdf). - Result of a measurement. - -A set of quantites being attributed to a measurand (measured quantitative property) together with any other available relevant information, like measurement uncertainty. - --- VIM - MeasurementResult - Result of a measurement. - -A set of quantites being attributed to a measurand (measured quantitative property) together with any other available relevant information, like measurement uncertainty. - --- VIM - measurement result - A measurement result generally contains “relevant information” about the set of measured quantity properties, such that some may be more representative of the measured quantity than others. This may be expressed in the form of a probability density function (pdf). - A measurement result has the measured quantity, measurement uncertainty and other relevant attributes as holistic parts. + CharacterisationEnvironment + Characterisation can either be made in air (ambient conditions, without specific controls on environmental parameters), or at different temperatures, different pressures (or in vacuum), or using different types of working gases (inert or reactive with respect to sample), different levels of humidity, etc. + Medium of the characterisation experiment defined by the set of environmental conditions that are controlled and measured over time during the experiment. + CharacterisationEnvironment + Medium of the characterisation experiment defined by the set of environmental conditions that are controlled and measured over time during the experiment. + Characterisation can either be made in air (ambient conditions, without specific controls on environmental parameters), or at different temperatures, different pressures (or in vacuum), or using different types of working gases (inert or reactive with respect to sample), different levels of humidity, etc. - - - RedStrangeAntiQuark - RedStrangeAntiQuark + + + + + + + T+10 L-2 M-3 I+4 Θ0 N0 J0 + + + QuarticElectricDipoleMomentPerCubicEnergyUnit + QuarticElectricDipoleMomentPerCubicEnergyUnit - + - - DeepDrawing - Forming of vessel parts from a flat mould into a three-dimensional shape by means of a press and tools, whereby material is neither removed nor added - Tiefziehen - DeepDrawing + CompressiveForming + Forming of a solid body, whereby the plastic state is essentially brought about by uniaxial or multiaxial compressive stress. + lasciano tensioni residue di compressione + Druckumformen + CompressiveForming - + + + + + Moulding + Free forming is pressure forming with tools that do not or only partially contain the shape of the workpiece and move against each other (from: DIN 8583 Part 3/05.70). + Gesenkformen + Moulding + + + - Peening - (according to DIN 8200) Shot peening to generate residual compressive stresses in layers of the blasting material close to the surface in order to improve certain component properties, e.g. fatigue strength, corrosion resistance, wear resistance (from: DIN 8200:1982) - ShotPeening - Verfestigungsstrahlen - Peening - (according to DIN 8200) Shot peening to generate residual compressive stresses in layers of the blasting material close to the surface in order to improve certain component properties, e.g. fatigue strength, corrosion resistance, wear resistance (from: DIN 8200:1982) + HardeningByForging + HardeningByForging - + + + + ComputerScience + A well-formed formula in computer science may be or not be interpreted by a computer. For example pseudo-code is only intended for human consumption. + A well-formed formula that follows the syntactic rules of computer science. + ComputerScience + A well-formed formula that follows the syntactic rules of computer science. + A well-formed formula in computer science may be or not be interpreted by a computer. For example pseudo-code is only intended for human consumption. + + + - T-1 L-3 M0 I0 Θ0 N0 J0 + T+1 L0 M0 I+1 Θ0 N-1 J0 - FrequencyPerVolumeUnit - FrequencyPerVolumeUnit + ElectricChargePerAmountUnit + ElectricChargePerAmountUnit - - + + - T0 L+3 M0 I0 Θ-1 N0 J0 + T0 L+3 M0 I0 Θ0 N0 J0 - VolumePerTemperatureUnit - VolumePerTemperatureUnit + VolumeUnit + VolumeUnit - - - - - Kerma - Kinetic energy released per mass. - Kerma - https://qudt.org/vocab/quantitykind/Kerma - https://www.wikidata.org/wiki/Q1739288 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-36 - 10-86.1 - Kinetic energy released per mass. + + + + + PhysicsMathematicalComputation + A functional icon that imitates the behaviour of the object through mathematical evaluations of some mathematical construct. + The equation that describes the velocity of a uniform accelerated body v = v0 + a*t is a functional icon. In general every analitical solution of a mathematical model can be considered an icon. A functional icon expresses its similarity with the object when is part of a process the makes it imitate the behavior of the object. In the case of v = v0 + a*t, plotting the velocity over time or listing their values at certain instants is when the icon expresses it functionality. + PhysicsMathematicalComputation + A functional icon that imitates the behaviour of the object through mathematical evaluations of some mathematical construct. + The equation that describes the velocity of a uniform accelerated body v = v0 + a*t is a functional icon. In general every analitical solution of a mathematical model can be considered an icon. A functional icon expresses its similarity with the object when is part of a process the makes it imitate the behavior of the object. In the case of v = v0 + a*t, plotting the velocity over time or listing their values at certain instants is when the icon expresses it functionality. - + - T-2 L+1 M+1 I0 Θ0 N0 J0 + T+4 L-2 M-1 I+2 Θ0 N0 J0 - ForceUnit - ForceUnit + CapacitanceUnit + CapacitanceUnit - + + + + + + + + + + + + + + + + + + + BottomAntiQuark + BottomAntiQuark + + + - + + ResistanceToAlternativeCurrent + Real part of the impedance. + ResistanceToAlternativeCurrent + https://www.wikidata.org/wiki/Q1048490 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-45 + 6-51.2 + Real part of the impedance. + + + + + BlueCharmAntiQuark + BlueCharmAntiQuark + + + + + + - - + + T-2 L+3 M+1 I-1 Θ0 N0 J0 - - - - ElectricFlux - Scalar quantity equal to the flux of the electric flux density D through a given directed surface S. - ElectricFlux - https://qudt.org/vocab/quantitykind/ElectricFlux - https://www.wikidata.org/wiki/Q501267 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-41 - 6-17 - Scalar quantity equal to the flux of the electric flux density D through a given directed surface S. + + MagneticDipoleMomentUnit + MagneticDipoleMomentUnit - - - - Assembled - A system of independent elements that are assembled together to perform a function. - Assembled - A system of independent elements that are assembled together to perform a function. + + + + + Attenuation + Decrease in magnitude of any kind of flux through a medium. + Extinction + Attenuation + 3-26.1 + Decrease in magnitude of any kind of flux through a medium. + https://en.wikipedia.org/wiki/Attenuation + https://doi.org/10.1351/goldbook.A00515 - - - - HolisticArrangement - A system which is mainly characterised by the spatial configuration of its elements. - HolisticArrangement - A system which is mainly characterised by the spatial configuration of its elements. + + + + + ElectrolyticConductivity + ElectrolyticConductivity + https://qudt.org/vocab/quantitykind/ElectrolyticConductivity + https://www.wikidata.org/wiki/Q907564 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-01-03 + 9-44 - - - - ComplexPower - Voltage phasor multiplied by complex conjugate of the current phasor. - ComplexApparentPower - ComplexPower - https://qudt.org/vocab/quantitykind/ComplexPower - https://www.wikidata.org/wiki/Q65239736 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-11-39 - 6-59 - Voltage phasor multiplied by complex conjugate of the current phasor. + + + + HotDipGalvanizing + Hot-dipGalvanizing + HotDipGalvanizing - - + + + - + - - - ResourceIdentifier - A formal computer-interpretable identifier of a system resource. - ResourceIdentifier - A formal computer-interpretable identifier of a system resource. + + + KnownConstant + A variable that stand for a well known numerical constant (a known number). + KnownConstant + A variable that stand for a well known numerical constant (a known number). + π refers to the constant number ~3.14 - + + + GluonType1 + GluonType1 + + + - - Rationale - A set of reasons or a logical basis for a decision or belief - Rationale - A set of reasons or a logical basis for a decision or belief + DataProcessingThroughCalibration + Describes how raw data are corrected and/or modified through calibrations. + DataProcessingThroughCalibration + Describes how raw data are corrected and/or modified through calibrations. - - - - - - - T0 L+1 M0 I0 Θ+1 N0 J0 - - - LengthTemperatureUnit - LengthTemperatureUnit + + + + ElectronProbeMicroanalysis + + Electron probe microanalysis (EPMA) is used for quantitative analysis of the elemental composition of solid specimens at a micrometer scale. The method uses bombardment of the specimen by keV electrons to excite characteristic X-rays from the sample, which are then detected by using wavelength-dispersive (WD) spectrometers. + ElectronProbeMicroanalysis + Electron probe microanalysis (EPMA) is used for quantitative analysis of the elemental composition of solid specimens at a micrometer scale. The method uses bombardment of the specimen by keV electrons to excite characteristic X-rays from the sample, which are then detected by using wavelength-dispersive (WD) spectrometers. - - - GreenCharmQuark - GreenCharmQuark + + + + + + + 1 + + + + + + + 2 + + + Neutron + An uncharged subatomic particle found in the atomic nucleus. + Neutron + An uncharged subatomic particle found in the atomic nucleus. + https://en.wikipedia.org/wiki/Neutron - - - - FourierTransformInfraredSpectroscopy - - A technique used to obtain an infrared spectrum of absorption or emission of a solid, liquid, or gas - FTIR - FourierTransformInfraredSpectroscopy - https://www.wikidata.org/wiki/Q901559 - A technique used to obtain an infrared spectrum of absorption or emission of a solid, liquid, or gas - https://en.wikipedia.org/wiki/Fourier-transform_infrared_spectroscopy + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Declaration + ConventionalSemiosis + Declaration - + - + - - MagneticFieldStrength - Strength of a magnetic field. Commonly denoted H. - MagnetizingFieldStrength - MagneticFieldStrength - http://qudt.org/vocab/quantitykind/MagneticFieldStrength - https://www.wikidata.org/wiki/Q28123 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-56 - 6-25 - https://doi.org/10.1351/goldbook.M03683 + + IonNumberDensity + Number of ions per volume. + IonDensity + IonNumberDensity + https://www.wikidata.org/wiki/Q98831218 + 10-62.2 + Number of ions per volume. - - - - Measurer - An observer that makes use of a measurement tool and provides a quantitative property. - Measurer - An observer that makes use of a measurement tool and provides a quantitative property. + + + + PrincipalQuantumNumber + Atomic quantum number related to the number n−1 of radial nodes of one-electron wave functions. + PrincipalQuantumNumber + https://qudt.org/vocab/quantitykind/PrincipalQuantumNumber + https://www.wikidata.org/wiki/Q867448 + 10-13.2 + Atomic quantum number related to the number n−1 of radial nodes of one-electron wave functions. - + + + + + + + + + + + + + + FundamentalMatterParticle + FundamentalMatterParticle + + + + + + + EndStep + The final step of a workflow. + There may be more than one end task, if they run in parallel leading to more than one output. + EndStep + The final step of a workflow. + There may be more than one end task, if they run in parallel leading to more than one output. + + + + - TemporalTile - A direct part that is obtained by partitioning a whole purely in temporal parts. - TemporalTile - A direct part that is obtained by partitioning a whole purely in temporal parts. + + + EndTile + EndTile - - - - RadialDistance - Distance, where one point is located on an axis or within a closed non self-intersecting curve or surface. - RadialDistance - https://qudt.org/vocab/quantitykind/RadialDistance - https://www.wikidata.org/wiki/Q1578234 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-01-26 - 3-1.9 - Distance, where one point is located on an axis or within a closed non self-intersecting curve or surface. + + + + Shape3Vector + A real vector with 3 elements. + Shape3Vector + A real vector with 3 elements. + The quantity value of physical quantities if real space is a Shape3Vector. - - - - - BindingFraction - The ratio of the binding energy of a nucleus to the atomic mass number. - BindingFraction - https://qudt.org/vocab/quantitykind/BindingFraction - https://www.wikidata.org/wiki/Q98058362 - 10-23.2 - The ratio of the binding energy of a nucleus to the atomic mass number. + + + + LiquidLiquidSuspension + A coarse dispersion of liquid in a liquid continuum phase. + LiquidLiquidSuspension + A coarse dispersion of liquid in a liquid continuum phase. - - - - - ActivityOfSolvent - For a solvent in a solution, quotient of the absolute activity and that of the pure substance at the same temperature and pressure. - ActivityOfSolvent - https://www.wikidata.org/wiki/Q89486193 - 9-27.1 - For a solvent in a solution, quotient of the absolute activity and that of the pure substance at the same temperature and pressure. + + + RedStrangeAntiQuark + RedStrangeAntiQuark - - - - - - - T+2 L-1 M-1 I+1 Θ0 N0 J0 - - - MagneticReluctivityUnit - MagneticReluctivityUnit + + + + DeepFreezing + Treatment carried out after hardening or case hardening consisting of cooling to a temperature below room temperature to complete the transformation of austenite to martensite + Cryogenic treatment, Deep-freeze + Tieftemperaturbehandeln + DeepFreezing + Treatment carried out after hardening or case hardening consisting of cooling to a temperature below room temperature to complete the transformation of austenite to martensite - + - - - ProtonMass - The rest mass of a proton. - ProtonMass - http://qudt.org/vocab/constant/ProtonMass - https://doi.org/10.1351/goldbook.P04914 + + + PoissonNumber + Ratio of transverse strain to axial strain. + PoissonsRatio + PoissonNumber + https://www.wikidata.org/wiki/Q190453 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-61 + 4-18 + Ratio of transverse strain to axial strain. - - - - MaterialLaw - A law that provides a connection between a material property and other properties of the object. - MaterialLaw - A law that provides a connection between a material property and other properties of the object. + + + + Ellipsometry + + Ellipsometry is an optical technique that uses polarised light to probe the dielectric +properties of a sample (optical system). The common application of ellipsometry is +the analysis of thin films. Through the analysis of the state of polarisation of the +light that is reflected from the sample, ellipsometry yields information on the layers that are thinner than the wavelength of the light itself, down to a single atomic +layer or less. Depending on what is already known about the sample, the technique +can probe a range of properties including layer thickness, morphology, and chemical composition. + Ellipsometry + Ellipsometry is an optical technique that uses polarised light to probe the dielectric +properties of a sample (optical system). The common application of ellipsometry is +the analysis of thin films. Through the analysis of the state of polarisation of the +light that is reflected from the sample, ellipsometry yields information on the layers that are thinner than the wavelength of the light itself, down to a single atomic +layer or less. Depending on what is already known about the sample, the technique +can probe a range of properties including layer thickness, morphology, and chemical composition. - - - - NaturalLaw - A scientific theory that focuses on a specific phenomena, for which a single statement (not necessariliy in mathematical form) can be expressed. - NaturalLaw - A scientific theory that focuses on a specific phenomena, for which a single statement (not necessariliy in mathematical form) can be expressed. + + + + + SlowingDownArea + In an infinite homogenous medium, one-sixth of the mean square of the distance between the neutron source and the point where a neutron reaches a given energy. + SlowingDownArea + https://qudt.org/vocab/quantitykind/Slowing-DownArea + https://www.wikidata.org/wiki/Q98950918 + 10-72.1 + In an infinite homogenous medium, one-sixth of the mean square of the distance between the neutron source and the point where a neutron reaches a given energy. - - - - - InternalStep - A generic step in a workflow, that is not the begin or the end. - InternalStep - A generic step in a workflow, that is not the begin or the end. + + + + CharacterisationDataValidation + Procedure to validate the characterisation data. + CharacterisationDataValidation + Procedure to validate the characterisation data. - - - - Vapor - A liquid aerosol composed of water droplets in air or another gas. - Vapor - A liquid aerosol composed of water droplets in air or another gas. + + + + DielectricAndImpedanceSpectroscopy + Dielectric spectroscopy (DS) or impedance spectroscopy, also known as electrochemical impedance spectroscopy, is frequently used to study the response of a sample subjected to an applied electric field of fixed or changing frequency. DS describes the dielectric properties of a material as a function of frequency. In DS, the radio and microwave frequency regions of the electromagnetic spectrum have been successfully made to interact with materials, so as to study the behavior of molecules. The interaction of applied alternating electric fields with dipoles possessing reorientation mobility in materials is also dealt by DS. + DielectricAndImpedanceSpectroscopy + Dielectric spectroscopy (DS) or impedance spectroscopy, also known as electrochemical impedance spectroscopy, is frequently used to study the response of a sample subjected to an applied electric field of fixed or changing frequency. DS describes the dielectric properties of a material as a function of frequency. In DS, the radio and microwave frequency regions of the electromagnetic spectrum have been successfully made to interact with materials, so as to study the behavior of molecules. The interaction of applied alternating electric fields with dipoles possessing reorientation mobility in materials is also dealt by DS. - + - - SpecificEnthalpy - Enthalpy per unit mass. - SpecificEnthalpy - https://qudt.org/vocab/quantitykind/SpecificEnthalpy - https://www.wikidata.org/wiki/Q21572993 - 5-21.3 - Enthalpy per unit mass. - https://en.wikipedia.org/wiki/Enthalpy#Specific_enthalpy - - - - - - - - - - - - - - - - - - - - - - - Conventional - A 'Sign' that stands for an 'Object' through convention, norm or habit, without any resemblance to it. - In Peirce semiotics this kind of sign category is called symbol. However, since symbol is also used in formal languages, the name is changed in conventional. - Conventional - A 'Sign' that stands for an 'Object' through convention, norm or habit, without any resemblance to it. + + + HoleDensity + Number of holes in valence band per volume. + HoleDensity + https://qudt.org/vocab/quantitykind/HoleDensity + https://www.wikidata.org/wiki/Q105971101 + 12-29.2 + Number of holes in valence band per volume. @@ -18778,799 +18260,744 @@ A set of quantites being attributed to a measurand (measured quantitative proper https://en.wikipedia.org/wiki/Higgs_boson - + + + + + + + + + + + + AbsorbedDose + Energy imparted to matter by ionizing radiation in a suitable small element of volume divided by the mass of that element of volume. + AbsorbedDose + http://qudt.org/vocab/quantitykind/AbsorbedDose + Energy imparted to matter by ionizing radiation in a suitable small element of volume divided by the mass of that element of volume. + 10-81.1 + https://doi.org/10.1351/goldbook.A00031 + + + + + + + SpecificEnergyImparted + In nuclear physics, energy imparted per mass. + SpecificEnergyImparted + https://qudt.org/vocab/quantitykind/SpecificEnergyImparted + https://www.wikidata.org/wiki/Q99566195 + 10-81.2 + In nuclear physics, energy imparted per mass. + + + - - DifferentialThermalAnalysis + + PostProcessingModel - Differential thermal analysis (DTA) is a thermoanalytic technique that is similar to differential scanning calorimetry. In DTA, the material under study and an inert reference are made to undergo identical thermal cycles, (i.e., same cooling or heating programme) while recording any temperature difference between sample and reference.[1] This differential temperature is then plotted against time, or against temperature (DTA curve, or thermogram). Changes in the sample, either exothermic or endothermic, can be detected relative to the inert reference. Thus, a DTA curve provides data on the transformations that have occurred, such as glass transitions, crystallization, melting and sublimation. The area under a DTA peak is the enthalpy change and is not affected by the heat capacity of the sample. - DTA - DifferentialThermalAnalysis - Differential thermal analysis (DTA) is a thermoanalytic technique that is similar to differential scanning calorimetry. In DTA, the material under study and an inert reference are made to undergo identical thermal cycles, (i.e., same cooling or heating programme) while recording any temperature difference between sample and reference.[1] This differential temperature is then plotted against time, or against temperature (DTA curve, or thermogram). Changes in the sample, either exothermic or endothermic, can be detected relative to the inert reference. Thus, a DTA curve provides data on the transformations that have occurred, such as glass transitions, crystallization, melting and sublimation. The area under a DTA peak is the enthalpy change and is not affected by the heat capacity of the sample. + Mathematical model used to process data. + The PostProcessingModel use is mainly intended to get secondary data from primary data. + PostProcessingModel + Mathematical model used to process data. + The PostProcessingModel use is mainly intended to get secondary data from primary data. - - - - - MagneticSusceptibility - Scalar or tensor quantity the product of which by the magnetic constant μ0 and by the magnetic field strength H is equal to the magnetic polarization J. - MagneticSusceptibility - https://qudt.org/vocab/unit/SUSCEPTIBILITY_MAG.html - https://www.wikidata.org/wiki/Q691463 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-12-37 - 6-28 - Scalar or tensor quantity the product of which by the magnetic constant μ0 and by the magnetic field strength H is equal to the magnetic polarization J. + + + + OrdinaryMatter + Matter composed of only matter particles, excluding anti-matter particles. + OrdinaryMatter + Matter composed of only matter particles, excluding anti-matter particles. - - + + + + - + - + - - Fermion - A physical particle with half odd integer spin (1/2, 3/2, etc...) that follows Fermi-Dirac statistics. - Fermion - A physical particle with half odd integer spin (1/2, 3/2, etc...) that follows Fermi-Dirac statistics. - https://en.wikipedia.org/wiki/Fermion + Substance + A composite physical object made of fermions (i.e. having mass and occupying space). + Substance + A composite physical object made of fermions (i.e. having mass and occupying space). - - - - TransferMolding - TransferMolding + + + + + AngularReciprocalLatticeVector + Vector whose scalar products with all fundamental lattice vectors are integral multiples of 2pi. + AngularReciprocalLatticeVector + https://qudt.org/vocab/quantitykind/AngularReciprocalLatticeVector + https://www.wikidata.org/wiki/Q105475278 + 12-2.1 + Vector whose scalar products with all fundamental lattice vectors are integral multiples of 2pi. - - - - - - - - - - - SlowingDownDensity - Number of slowed-down particles per time and volume. - SlowingDownDensity - https://qudt.org/vocab/quantitykind/Slowing-DownDensity - https://www.wikidata.org/wiki/Q98915830 - 10-67 - Number of slowed-down particles per time and volume. + + + + StepChronopotentiometry + + chronopotentiometry where the applied current is changed in steps + StepChronopotentiometry + chronopotentiometry where the applied current is changed in steps - - - - SolidGasSuspension - A coarse dispersion of gas in a solid continuum phase. - SolidGasSuspension - A coarse dispersion of gas in a solid continuum phase. + + + + MetallicPowderSintering + MetallicPowderSintering - + - - - HalfValueThickness - Thickness of the attenuating layer that reduces the quantity of interest of a unidirectional beam of infinitesimal width to half of its initial value. - HalfValueThickness - https://qudt.org/vocab/quantitykind/Half-ValueThickness - https://www.wikidata.org/wiki/Q127526 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-04-34 - 10-53 - Thickness of the attenuating layer that reduces the quantity of interest of a unidirectional beam of infinitesimal width to half of its initial value. + + + MassFractionOfDryMatter + Quantity wd = 1 − wH2O, where wH2O is mass fraction of water. + MassFractionOfDryMatter + https://qudt.org/vocab/quantitykind/MassFractionOfDryMatter + https://www.wikidata.org/wiki/Q76379189 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-64 + 5-32 + Quantity wd = 1 − wH2O, where wH2O is mass fraction of water. - + - - Thickness - Shortest distance between two surfaces limiting a layer, when this distance can be considered to be constant over a region of a finite size. - Thickness - https://www.wikidata.org/wiki/Q3589038 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-01-24 - 3-1.4 - Shortest distance between two surfaces limiting a layer, when this distance can be considered to be constant over a region of a finite size. + + DampingCoefficient + Inverse of the time constant of an exponentially varying quantity. + DampingCoefficient + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-05-24 + 3-24 + Inverse of the time constant of an exponentially varying quantity. - + - T-3 L+1 M+1 I0 Θ0 N0 J0 + T-2 L+3 M+1 I0 Θ0 N0 J0 - MassLengthPerCubicTimeUnit - MassLengthPerCubicTimeUnit + ForceAreaUnit + ForceAreaUnit - - - - - MolarGibbsEnergy - Gibbs energy per amount of substance. - MolarGibbsEnergy - https://www.wikidata.org/wiki/Q88863324 - 9-6.4 - Gibbs energy per amount of substance. + + + + LengthFractionUnit + Unit for quantities of dimension one that are the fraction of two lengths. + LengthFractionUnit + Unit for quantities of dimension one that are the fraction of two lengths. + Unit for plane angle. - - + + - - + + - - - EquilibriumPositionVector - In condensed matter physics, position vector of an atom or ion in equilibrium. - EquilibriumPositionVector - https://qudt.org/vocab/quantitykind/EquilibriumPositionVectorOfIon - https://www.wikidata.org/wiki/Q105533477 - 12-7.2 - In condensed matter physics, position vector of an atom or ion in equilibrium. - - - - - - URL - The term "Uniform Resource Locator" (URL) refers to the subset of URIs that, in addition to identifying a resource, provide a means of locating the resource by describing its primary access mechanism (e.g., its network "location"). - URL - The term "Uniform Resource Locator" (URL) refers to the subset of URIs that, in addition to identifying a resource, provide a means of locating the resource by describing its primary access mechanism (e.g., its network "location"). + SpatialTiling + A well formed tessellation with tiles that all spatial. + SpatialTiling + A well formed tessellation with tiles that all spatial. - + - - - - CubicExpansionCoefficient - Quantity characterizing the variation with thermodynamic temperature T of the volume V of a body, under given conditions. - alpha_V = (1/V) * (dV/dT) - CubicExpansionCoefficient - https://qudt.org/vocab/quantitykind/CubicExpansionCoefficient - https://www.wikidata.org/wiki/Q74761076 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-28 - 5-3.2 - Quantity characterizing the variation with thermodynamic temperature T of the volume V of a body, under given conditions. + + + NumberOfEntities + Discrete quantity; number of entities of a given kind in a system. + NumberOfEntities + https://www.wikidata.org/wiki/Q614112 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=112-01-09 + 9-1 + Discrete quantity; number of entities of a given kind in a system. + https://doi.org/10.1351/goldbook.N04266 - - - - - - - - - - CoefficientOfThermalExpansion - Material property which describes how the size of an object changes with a change in temperature. - ThermalExpansionCoefficient - CoefficientOfThermalExpansion - https://www.wikidata.org/wiki/Q45760 - Material property which describes how the size of an object changes with a change in temperature. + + + + TransmissionElectronMicroscopy + + Transmission electron microscopy (TEM) is a microscopy technique in which a beam of electrons is transmitted through a specimen to form an image. The specimen is most often an ultrathin section less than 100 nm thick or a suspension on a grid. An image is formed from the interaction of the electrons with the sample as the beam is transmitted through the specimen. The image is then magnified and focused onto an imaging device, such as a fluorescent screen, a layer of photographic film, or a sensor such as a scintillator attached to a charge-coupled device. + TEM + TransmissionElectronMicroscopy + Transmission electron microscopy (TEM) is a microscopy technique in which a beam of electrons is transmitted through a specimen to form an image. The specimen is most often an ultrathin section less than 100 nm thick or a suspension on a grid. An image is formed from the interaction of the electrons with the sample as the beam is transmitted through the specimen. The image is then magnified and focused onto an imaging device, such as a fluorescent screen, a layer of photographic film, or a sensor such as a scintillator attached to a charge-coupled device. - - - - - LinearExpansionCoefficient - Relative change of length per change of temperature. - LinearExpansionCoefficient - https://qudt.org/vocab/quantitykind/LinearExpansionCoefficient - https://www.wikidata.org/wiki/Q74760821 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-27 - 5-3.1 - Relative change of length per change of temperature. + + + DerivedQuantity + "Quantity, in a system of quantities, defined in terms of the base quantities of that system". + DerivedQuantity + "Quantity, in a system of quantities, defined in terms of the base quantities of that system". + derived quantity - + - - - - - - - - - LatticeVector - translation vector that maps the crystal lattice on itself - LatticeVector - https://qudt.org/vocab/quantitykind/LatticeVector - https://www.wikidata.org/wiki/Q105435234 - 12-1.1 - translation vector that maps the crystal lattice on itself + + Porosity + Ratio of void volume and total volume of a porous material. + Porosity + https://www.wikidata.org/wiki/Q622669 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=801-31-32 + Ratio of void volume and total volume of a porous material. + https://doi.org/10.1351/goldbook.P04762 - - - - - - - T0 L0 M0 I0 Θ0 N-1 J0 - - - PerAmountUnit - PerAmountUnit + + + + Vapor + A liquid aerosol composed of water droplets in air or another gas. + Vapor + A liquid aerosol composed of water droplets in air or another gas. - - - - - - - - - CharacterisationEnvironment - Characterisation can either be made in air (ambient conditions, without specific controls on environmental parameters), or at different temperatures, different pressures (or in vacuum), or using different types of working gases (inert or reactive with respect to sample), different levels of humidity, etc. - Medium of the characterisation experiment defined by the set of environmental conditions that are controlled and measured over time during the experiment. - CharacterisationEnvironment - Medium of the characterisation experiment defined by the set of environmental conditions that are controlled and measured over time during the experiment. - Characterisation can either be made in air (ambient conditions, without specific controls on environmental parameters), or at different temperatures, different pressures (or in vacuum), or using different types of working gases (inert or reactive with respect to sample), different levels of humidity, etc. + + + SpatiallyFundamental + The class of individuals that satisfy a whole defining criteria (i.e. belongs to a subclass of whole) and have no spatial parts that satisfy that same criteria (no parts that are of the same type of the whole). + SpatiallyFundamental + The class of individuals that satisfy a whole defining criteria (i.e. belongs to a subclass of whole) and have no spatial parts that satisfy that same criteria (no parts that are of the same type of the whole). - + - - + - - T-2 L+2 M+1 I-2 Θ0 N0 J0 + + - - InductanceUnit - InductanceUnit + + + KinematicViscosity + Quotient of dynamic viscosity and mass density of a fluid. + KinematicViscosity + https://qudt.org/vocab/quantitykind/KinematicViscosity + https://www.wikidata.org/wiki/Q15106259 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-35 + 4-25 + Quotient of dynamic viscosity and mass density of a fluid. + https://doi.org/10.1351/goldbook.K03395 - - - + + + + - + - - + + + + + + + + + + + + + + + + + + + + + + + + + + + - StandaloneAtom - A standalone atom can be bonded with other atoms by intermolecular forces (i.e. dipole–dipole, London dispersion force, hydrogen bonding), since this bonds does not involve electron sharing. - An atom that does not share electrons with other atoms. - StandaloneAtom - An atom that does not share electrons with other atoms. - - - - - - HardeningByDrawing - HardeningByDrawing - - - - - - - POH - Written as pOH - number quantifying the acidic or the alkaline character of a solution, equal to the negative of the decimal logarithm of ion activity aOH- of the hydroxide anion OH- -pH = −10 log(a_OH-) - POH - number quantifying the acidic or the alkaline character of a solution, equal to the negative of the decimal logarithm of ion activity aOH- of the hydroxide anion OH- -pH = −10 log(a_OH-) + ISQBaseQuantity + Base quantities defined in the International System of Quantities (ISQ). + ISQBaseQuantity + Base quantities defined in the International System of Quantities (ISQ). + https://en.wikipedia.org/wiki/International_System_of_Quantities - + - T+1 L0 M0 I+1 Θ0 N0 J0 + T-1 L-2 M+1 I0 Θ0 N0 J0 - ElectricChargeUnit - ElectricChargeUnit - - - - - - DoseEquivalentRate - Time derivative of the dose equivalent. - DoseEquivalentRate - https://www.wikidata.org/wiki/Q99604810 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-14-02 - 10-83.2 - Time derivative of the dose equivalent. - - - - - - - MeanFreePathOfPhonons - average distance that phonons travel between two successive interactions - MeanFreePathOfPhonons - https://qudt.org/vocab/quantitykind/PhononMeanFreePath - https://www.wikidata.org/wiki/Q105672255 - 12-15.1 - average distance that phonons travel between two successive interactions - - - - - NumericalData - Data that can be decoded under a quantitative schema and also associated with a graphical number symbols. - NumericalData - Data that can be decoded under a quantitative schema and also associated with a graphical number symbols. + MassFluxUnit + MassFluxUnit - - - - PlasticModeling - PlasticModeling + + + PhysicalPhenomena + A CausalSystem that includes quantum parts that are not bonded with the rest. + PhysicalPhenomena + A CausalSystem that includes quantum parts that are not bonded with the rest. - - - - - StandardEquilibriumConstant - ThermodynamicEquilibriumConstant - StandardEquilibriumConstant - https://www.wikidata.org/wiki/Q95993378 - 9-32 - https://doi.org/10.1351/goldbook.S05915 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + GreenQuark + GreenQuark - - - + + + + + + + 2 + + + + + + + 1 + + + Proton + A positive charged subatomic particle found in the atomic nucleus. + Proton + A positive charged subatomic particle found in the atomic nucleus. + https://en.wikipedia.org/wiki/Proton + + + + + - - - T-3 L-3 M+1 I0 Θ0 N0 J0 - + + + + + + - PowerPerAreaVolumeUnit - PowerPerAreaVolumeUnit - + Persistence + The interest is on the 4D object as it extends in time (process) or as it persists in time (object): +- object (focus on spatial configuration) +- process (focus on temporal evolution) - - - - - Wavenumber - Reciprocal of the wavelength. - Repetency - Wavenumber - https://qudt.org/vocab/quantitykind/Wavenumber - https://www.wikidata.org/wiki/Q192510 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-10-11 - https://dbpedia.org/page/Wavenumber - 3-20 - Reciprocal of the wavelength. - https://en.wikipedia.org/wiki/Wavenumber - https://doi.org/10.1351/goldbook.W06664 - +The concepts of endurant and perdurant implicitly rely on the concept of instantaneous 3D snapshot of the world object, that in the EMMO is not allowed since everything extends in 4D and there are no abstract objects. Moreover, time is a measured property in the EMMO and not an objective characteristic of an object, and cannot be used as temporal index to identify endurant position in time. - - - - GyromagneticRatioOfTheElectron - Proportionality constant between the magnetic dipole moment and the angular momentum of the electron. - GyromagneticCoefficientOfTheElectron - MagnetogyricRatioOfTheElectron - GyromagneticRatioOfTheElectron - https://www.wikidata.org/wiki/Q97543076 - 10-12.2 - Proportionality constant between the magnetic dipole moment and the angular momentum of the electron. - +For this reason an individual in the EMMO can always be classified both endurant and perdurant, due to its nature of 4D entity (e.g. an individual may belong both to the class of runners and the class of running process), and the distinction is purely semantic. In fact, the object/process distinction is simply a matter of convenience in a 4D approach since a temporal extension is always the case, and stationarity depends upon observer time scale. For this reason, the same individual (4D object) may play the role of a process or of an object class depending on the object to which it relates. - - - - LogarithmicUnit - A logarithmic unit is a unit that can be used to express a quantity (physical or mathematical) on a logarithmic scale, that is, as being proportional to the value of a logarithm function applied to the ratio of the quantity and a reference quantity of the same type. - Note that logarithmic units like decibel or neper are not univocally defines, since their definition depends on whether they are used to measure a "power" or a "root-power" quantity. +Nevertheless, it is useful to introduce categorizations that characterize persistency through continuant and occurrent concepts, even if not ontologically but only cognitively defined. This is also due to the fact that our language distinguish between nouns and verbs to address things, forcing the separation between things that happens and things that persist. -It is advisory to create a uniquely defined subclass these units for concrete usage. - LogarithmicUnit - http://qudt.org/schema/qudt/LogarithmicUnit - A logarithmic unit is a unit that can be used to express a quantity (physical or mathematical) on a logarithmic scale, that is, as being proportional to the value of a logarithm function applied to the ratio of the quantity and a reference quantity of the same type. - Decibel - Note that logarithmic units like decibel or neper are not univocally defines, since their definition depends on whether they are used to measure a "power" or a "root-power" quantity. +This perspective provides classes conceptually similar to the concepts of endurant and perdurant (a.k.a. continuant and occurrent). We claim that this distinction is motivated by our cognitive bias, and we do not commit to the fact that both these kinds of entity “do really exist”. For this reason, a whole instance can be both process and object, according to different cognitive approaches (see Wonderweb D17). -It is advisory to create a uniquely defined subclass these units for concrete usage. - https://en.wikipedia.org/wiki/Logarithmic_scale#Logarithmic_units +The distinction between endurant and perdurant as usually introduced in literature (see BFO SPAN/SNAP approach) is then no more ontological, but can still be expressed through the introduction of ad hoc primitive definitions that follow the interpreter endurantist or perdurantist attitude. + The union of the object or process classes. + Persistence + The union of the object or process classes. - - - BlueUpQuark - BlueUpQuark + + + + CalibrationData + Calibration data are used to provide correction of measured data or perform uncertainty calculations. They are generally the result of a measuerement on a reference specimen. + CalibrationData + Calibration data are used to provide correction of measured data or perform uncertainty calculations. They are generally the result of a measuerement on a reference specimen. - - - - - IsentropicExponent - For an ideal gas, isentropic exponent is equal to ratio of the specific heat capacities. - IsentropicExponent - https://qudt.org/vocab/quantitykind/IsentropicExponent - https://www.wikidata.org/wiki/Q75775739 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-52 - 5-17.2 + + + + + + + + + + + + + + + + + + + Dispersion + A material in which distributed particles of one phase are dispersed in a different continuous phase. + Dispersion + A material in which distributed particles of one phase are dispersed in a different continuous phase. - - - - - RybergConstant - The Rydberg constant represents the limiting value of the highest wavenumber (the inverse wavelength) of any photon that can be emitted from the hydrogen atom, or, alternatively, the wavenumber of the lowest-energy photon capable of ionizing the hydrogen atom from its ground state. - RybergConstant - http://qudt.org/vocab/constant/RydbergConstant - https://doi.org/10.1351/goldbook.R05430 + + + + EnergyDispersiveXraySpectroscopy + + An analytical technique used for the elemental analysis or chemical characterization of a sample. + EDS + EDX + EnergyDispersiveXraySpectroscopy + https://www.wikidata.org/wiki/Q386334 + An analytical technique used for the elemental analysis or chemical characterization of a sample. + https://en.wikipedia.org/wiki/Energy-dispersive_X-ray_spectroscopy - + - - Wavenumber - The number of waves per unit length along the direction of propagation. - Wavenumber - http://qudt.org/vocab/quantitykind/Wavenumber - 3-18 - https://doi.org/10.1351/goldbook.W06664 + + + CarrierLifetime + Time constant for recombination or trapping of minority charge carriers in semiconductors + CarrierLifetime + https://qudt.org/vocab/quantitykind/CarrierLifetime + https://www.wikidata.org/wiki/Q5046374 + 12-32.2 + Time constant for recombination or trapping of minority charge carriers in semiconductors - - - - ElectricCurrentPhasor - ElectricCurrentPhasor - https://qudt.org/vocab/quantitykind/ElectricCurrentPhasor - https://www.wikidata.org/wiki/Q78514596 - 6-49 + + + ClassicalData + Data that are expressed through classical physics mechanisms, having one value and one state, and being in the same place at the same time. + ClassicalData + Data that are expressed through classical physics mechanisms, having one value and one state, and being in the same place at the same time. - - - - - - - - - - - MolarAttenuationCoefficient - Quotient of linear attenuation coefficient µ and the amount c of the medium. - MolarAttenuationCoefficient - https://www.wikidata.org/wiki/Q98592828 - 10-51 - Quotient of linear attenuation coefficient µ and the amount c of the medium. + + + + + ElectronBackscatterDiffraction + + Electron backscatter diffraction (EBSD) is a scanning electron microscopy (SEM) technique used to study the crystallographic structure of materials. EBSD is carried out in a scanning electron microscope equipped with an EBSD detector comprising at least a phosphorescent screen, a compact lens and a low-light camera. In this configuration, the SEM incident beam hits the tilted sample. As backscattered electrons leave the sample, they interact with the crystal's periodic atomic lattice planes and diffract according to Bragg's law at various scattering angles before reaching the phosphor screen forming Kikuchi patterns (EBSPs). EBSD spatial resolution depends on many factors, including the nature of the material under study and the sample preparation. Thus, EBSPs can be indexed to provide information about the material's grain structure, grain orientation, and phase at the micro-scale. EBSD is applied for impurities and defect studies, plastic deformation, and statistical analysis for average misorientation, grain size, and crystallographic texture. EBSD can also be combined with energy-dispersive X-ray spectroscopy (EDS), cathodoluminescence (CL), and wavelength-dispersive X-ray spectroscopy (WDS) for advanced phase identification and materials discovery. + EBSD + ElectronBackscatterDiffraction + Electron backscatter diffraction (EBSD) is a scanning electron microscopy (SEM) technique used to study the crystallographic structure of materials. EBSD is carried out in a scanning electron microscope equipped with an EBSD detector comprising at least a phosphorescent screen, a compact lens and a low-light camera. In this configuration, the SEM incident beam hits the tilted sample. As backscattered electrons leave the sample, they interact with the crystal's periodic atomic lattice planes and diffract according to Bragg's law at various scattering angles before reaching the phosphor screen forming Kikuchi patterns (EBSPs). EBSD spatial resolution depends on many factors, including the nature of the material under study and the sample preparation. Thus, EBSPs can be indexed to provide information about the material's grain structure, grain orientation, and phase at the micro-scale. EBSD is applied for impurities and defect studies, plastic deformation, and statistical analysis for average misorientation, grain size, and crystallographic texture. EBSD can also be combined with energy-dispersive X-ray spectroscopy (EDS), cathodoluminescence (CL), and wavelength-dispersive X-ray spectroscopy (WDS) for advanced phase identification and materials discovery. - - - - HotDipGalvanizing - Hot-dipGalvanizing - HotDipGalvanizing + + + PseudovectorMeson + A meson with total spin 1 and even parit. + PseudovectorMeson + A meson with total spin 1 and even parit. + https://en.wikipedia.org/wiki/Pseudovector_meson - - - - - - - - - - - NonPrefixedUnit - A measurement unit symbol that do not have a metric prefix as a direct spatial part. - NonPrefixedUnit - A measurement unit symbol that do not have a metric prefix as a direct spatial part. + + + + Join + A tessellation in wich a tile is next for two or more non spatially connected tiles. + Join + A tessellation in wich a tile is next for two or more non spatially connected tiles. - + - - - - - - - - MassEnergyTransferCoefficient - For ionizing uncharged particles of a given type and energy, the differential quotient of Rtr with respect to l. Where Rtr is the mean energy that is transferred to kinetic energy of charged particles by interactions of the uncharged particles of incident radiant energy R in traversing a distance l in the material of density rho, divided by rho and R - MassEnergyTransferCoefficient - https://qudt.org/vocab/quantitykind/MassEnergyTransferCoefficient - https://www.wikidata.org/wiki/Q99714619 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-04-32 - 10-87 - For ionizing uncharged particles of a given type and energy, the differential quotient of Rtr with respect to l. Where Rtr is the mean energy that is transferred to kinetic energy of charged particles by interactions of the uncharged particles of incident radiant energy R in traversing a distance l in the material of density rho, divided by rho and R + + ComptonWavelength + Quotient of the Planck constant and the product of the mass of the particle and the speed of light in vacuum. + ComptonWavelength + https://qudt.org/vocab/constant/ComptonWavelength + https://www.wikidata.org/wiki/Q1145377 + 10-20 + Quotient of the Planck constant and the product of the mass of the particle and the speed of light in vacuum. + https://en.wikipedia.org/wiki/Compton_wavelength - + - - - - - T+1 L-3 M0 I0 Θ0 N0 J0 - - - TimePerVolumeUnit - TimePerVolumeUnit + + RadialDistance + Distance, where one point is located on an axis or within a closed non self-intersecting curve or surface. + RadialDistance + https://qudt.org/vocab/quantitykind/RadialDistance + https://www.wikidata.org/wiki/Q1578234 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-01-26 + 3-1.9 + Distance, where one point is located on an axis or within a closed non self-intersecting curve or surface. - + - - - - - T+2 L-5 M-1 I0 Θ0 N0 J0 - - - EnergyDensityOfStatesUnit - EnergyDensityOfStatesUnit + + + RelativeLinearStrain + Relative change of length with respect the original length. + RelativeLinearStrain + https://qudt.org/vocab/quantitykind/LinearStrain + https://www.wikidata.org/wiki/Q1990546 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-58 + 4-17.2 + Relative change of length with respect the original length. + https://doi.org/10.1351/goldbook.L03560 - - - - - - - - - - - SectionModulus - SectionModulus - https://qudt.org/vocab/quantitykind/SectionModulus - https://www.wikidata.org/wiki/Q1930808 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-31 - 4-22 + + + + + Emulsion + An emulsion is a mixture of two or more liquids that are normally immiscible (a liquid-liquid heterogeneous mixture). + Emulsion + An emulsion is a mixture of two or more liquids that are normally immiscible (a liquid-liquid heterogeneous mixture). + Mayonnaise, milk. - + - TensileTesting + FibDic - Tensile testing, also known as tension testing, is a test in which a sample is subjected to a controlled tension until failure. Properties that are directly measured via a tensile test are ultimate tensile strength, breaking strength, maximum elongation and reduction in area. From these measurements the following properties can also be determined: Young's modulus, Poisson's ratio, yield strength, and strain-hardening characteristics. Uniaxial tensile testing is the most commonly used for obtaining the mechanical characteristics of isotropic materials. Some materials use biaxial tensile testing. The main difference between these testing machines being how load is applied on the materials. - TensionTest - TensileTesting - Tensile testing, also known as tension testing, is a test in which a sample is subjected to a controlled tension until failure. Properties that are directly measured via a tensile test are ultimate tensile strength, breaking strength, maximum elongation and reduction in area. From these measurements the following properties can also be determined: Young's modulus, Poisson's ratio, yield strength, and strain-hardening characteristics. Uniaxial tensile testing is the most commonly used for obtaining the mechanical characteristics of isotropic materials. Some materials use biaxial tensile testing. The main difference between these testing machines being how load is applied on the materials. - - - - - - - - - - - - - - - - - - - - - StrangeAntiQuark - StrangeAntiQuark + The FIB-DIC (Focused Ion Beam - Digital Image Correlation) ring-core technique is a powerful method for measuring residual stresses in materials. It is based on milling a ring-shaped sample, or core, from the material of interest using a focused ion beam (FIB). + FIBDICResidualStressAnalysis + FibDic + The FIB-DIC (Focused Ion Beam - Digital Image Correlation) ring-core technique is a powerful method for measuring residual stresses in materials. It is based on milling a ring-shaped sample, or core, from the material of interest using a focused ion beam (FIB). - - - - LevelOfAutomation - - Describes the level of automation of the test. - LevelOfAutomation - Describes the level of automation of the test. + + + + + + + T-1 L-3 M+1 I0 Θ0 N0 J0 + + + MassPerVolumeTimeUnit + MassPerVolumeTimeUnit - - + + - - + + * - - ChemicalPotential - Energy per unit change in amount of substance. - ChemicalPotential - http://qudt.org/vocab/quantitykind/ChemicalPotential - 9-17 - https://doi.org/10.1351/goldbook.C01032 + + Multiplication + Multiplication - + - - ApparentPower - RMS value voltage multiplied by rms value of electric current. - ApparentPower - https://qudt.org/vocab/quantitykind/ApparentPower - https://www.wikidata.org/wiki/Q1930258 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-11-41 - 6-57 - RMS value voltage multiplied by rms value of electric current. + + + PropagationCoefficient + Measure of the change of amplitude and phase angle of a plane wave propagating in a given direction. + PropagationCoefficient + https://qudt.org/vocab/quantitykind/PropagationCoefficient.html + https://www.wikidata.org/wiki/Q1434913 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-10-18 + 3-26.3 + Measure of the change of amplitude and phase angle of a plane wave propagating in a given direction. - - - - UndefinedEdgeCutting - Spanen mit geometrisch unbestimmten Schneiden - UndefinedEdgeCutting + + + + + MassDefect + Sum of the product of the proton number and the hydrogen atomic mass, and the neutron rest mass, minus the rest mass of the atom. + MassDefect + https://qudt.org/vocab/quantitykind/MassDefect + https://www.wikidata.org/wiki/Q26897126 + 10-21.2 + Sum of the product of the proton number and the hydrogen atomic mass, and the neutron rest mass, minus the rest mass of the atom. - - - GluonType5 - GluonType5 + + + + DataAnalysis + Data processing activities performed on the secondary data to determine the characterisation property (e.g. classification, quantification), which can be performed manually or exploiting a model. + DataAnalysis + Data processing activities performed on the secondary data to determine the characterisation property (e.g. classification, quantification), which can be performed manually or exploiting a model. - + - - - - - T-2 L+3 M0 I0 Θ0 N0 J0 - - - VolumePerSquareTimeUnit - VolumePerSquareTimeUnit + + + StandardAbsoluteActivity + Property of a solute in a solution. + StandardAbsoluteActivityInASolution + StandardAbsoluteActivity + https://www.wikidata.org/wiki/Q89485936 + 9-26 + Property of a solute in a solution. - - - - - - - - - - - - - - - - - ThirdGenerationFermion - ThirdGenerationFermion + + + + + + + + + + + CharacterisationSystem + A set of one or more 'CharacterisationInstruments' and often other devices, including any sample holder, reagent and supply, assembled and adapted to give information used to generate 'MeasuredQuantityProperty' within specified intervals for quantities of specified kinds. + Set of one or more measuring instruments and often other components, assembled and +adapted to give information used to generate measured values within specified intervals for +quantities of specified kinds +NOTE 1 The components mentioned in the definition may be devices, reagents, and supplies. +NOTE 2 A measuring system is sometimes referred to as “measuring equipment” or “device”, for example in ISO 10012, +Measurement management systems – Requirements for measurement processes and measuring equipment and ISO +17025, General requirements for the competence of testing and calibration laboratories. +NOTE 3 Although the terms “measuring system” and “measurement system” are frequently used synonymously, the +latter is instead sometimes used to refer to a measuring system plus all other entities involved in a measurement, +including the object under measurement and the person(s) performing the measurement. +NOTE 4 A measuring system can be used as a measurement standard. + CharacterisationSystem + Set of one or more measuring instruments and often other components, assembled and +adapted to give information used to generate measured values within specified intervals for +quantities of specified kinds +NOTE 1 The components mentioned in the definition may be devices, reagents, and supplies. +NOTE 2 A measuring system is sometimes referred to as “measuring equipment” or “device”, for example in ISO 10012, +Measurement management systems – Requirements for measurement processes and measuring equipment and ISO +17025, General requirements for the competence of testing and calibration laboratories. +NOTE 3 Although the terms “measuring system” and “measurement system” are frequently used synonymously, the +latter is instead sometimes used to refer to a measuring system plus all other entities involved in a measurement, +including the object under measurement and the person(s) performing the measurement. +NOTE 4 A measuring system can be used as a measurement standard. + A set of one or more 'CharacterisationInstruments' and often other devices, including any sample holder, reagent and supply, assembled and adapted to give information used to generate 'MeasuredQuantityProperty' within specified intervals for quantities of specified kinds. + Measuring system - - + + - - + + - - - Entropy - Logarithmic measure of the number of available states of a system. - May also be referred to as a measure of order of a system. - Entropy - http://qudt.org/vocab/quantitykind/Entropy - 5-18 - https://doi.org/10.1351/goldbook.E02149 + + MeasuringSystem + A set of one or more 'MeasuringInstruments' and often other devices, including any reagent and supply, assembled and adapted to give information used to generate 'MeasuredQuantityProperty' within specified intervals for quantities of specified kinds. + +-- VIM + MeasuringSystem + A set of one or more 'MeasuringInstruments' and often other devices, including any reagent and supply, assembled and adapted to give information used to generate 'MeasuredQuantityProperty' within specified intervals for quantities of specified kinds. + +-- VIM + measuring system - - - CausalCollapse - A causal collapse is a fundamental interaction that is expressed as a complete bipartite directed graph K(m,n), when m>n. - CausalCollapse - A causal collapse is a fundamental interaction that is expressed as a complete bipartite directed graph K(m,n), when m>n. + + + + ApplicationSpecificScript + A scripting language developed specifically for an application, so that it's usage and interpretation is limited in this context. + ApplicationSpecificScript + A scripting language developed specifically for an application, so that it's usage and interpretation is limited in this context. + Scripting file for the execution of modelling software such as LAMMPS, OpenFOAM, or for general purpose platforms such as MATLAB or Mathematica. - + - T-3 L+2 M0 I0 Θ0 N0 J0 + T-2 L+1 M+1 I-2 Θ0 N0 J0 - AbsorbedDoseRateUnit - AbsorbedDoseRateUnit - - - - - - - - - - - - - ThermalDiffusivity - ThermalDiffusionCoefficient - ThermalDiffusivity - https://qudt.org/vocab/quantitykind/ThermalDiffusivity - https://www.wikidata.org/wiki/Q3381809 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-53 - 5-14 - - - - - - Rolling - Continuous or stepwise pressure forming with one or more rotating tools (rollers), without or with additional tools, e.g. plugs or mandrels, rods, guide tools - Walzen - Rolling + PermeabilityUnit + PermeabilityUnit - + - - + - + - + @@ -19578,965 +19005,974 @@ It is advisory to create a uniquely defined subclass these units for concrete us - AntiNeutrinoType - AntiNeutrinoType - - - - - NonEncodedData - Data that occurs naturally without an encoding agent producing it. - This is a really broad class that gathers all physical phenomena in which a variation occurs naturally. - EnvironmentalData - NonEncodedData - Data that occurs naturally without an encoding agent producing it. - A cloud in the sky. The radiative spectrum of a star. - This is a really broad class that gathers all physical phenomena in which a variation occurs naturally. - - - - - - SecondaryIonMassSpectrometry - - Secondary-ion mass spectrometry (SIMS) is a technique used to analyze the composition of solid surfaces and thin films by sputtering the surface of the specimen with a focused primary ion beam and collecting and analyzing ejected secondary ions. - SIMS - SecondaryIonMassSpectrometry - Secondary-ion mass spectrometry (SIMS) is a technique used to analyze the composition of solid surfaces and thin films by sputtering the surface of the specimen with a focused primary ion beam and collecting and analyzing ejected secondary ions. - - - - - - ConcreteOrPlasterPouring - ConcreteOrPlasterPouring - - - - - - - - - T-2 L0 M+1 I-1 Θ0 N0 J0 - - - MagneticFluxDensityUnit - MagneticFluxDensityUnit - - - - - - - WorkFunction - Work function is the energy difference between an electron at rest at infinity and an electron at the Fermi level in the interior of a substance. - least energy required for the emission of a conduction electron. - ElectronWorkFunction - WorkFunction - https://www.wikidata.org/wiki/Q783800 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-06-35 - 12-24.1 - least energy required for the emission of a conduction electron. - https://doi.org/10.1351/goldbook.E02015 - - - - - RedUpQuark - RedUpQuark - - - - - - IsothermalMicrocalorimetry - - Isothermal microcalorimetry (IMC) is a laboratory method for real-time monitoring and dynamic analysis of chemical, physical and biological processes. Over a period of hours or days, IMC determines the onset, rate, extent and energetics of such processes for specimens in small ampoules (e.g. 3–20 ml) at a constant set temperature (c. 15 °C–150 °C). - -IMC accomplishes this dynamic analysis by measuring and recording vs. elapsed time the net rate of heat flow (μJ/s = μW) to or from the specimen ampoule, and the cumulative amount of heat (J) consumed or produced. - IMC - IsothermalMicrocalorimetry - Isothermal microcalorimetry (IMC) is a laboratory method for real-time monitoring and dynamic analysis of chemical, physical and biological processes. Over a period of hours or days, IMC determines the onset, rate, extent and energetics of such processes for specimens in small ampoules (e.g. 3–20 ml) at a constant set temperature (c. 15 °C–150 °C). - -IMC accomplishes this dynamic analysis by measuring and recording vs. elapsed time the net rate of heat flow (μJ/s = μW) to or from the specimen ampoule, and the cumulative amount of heat (J) consumed or produced. + TopAntiQuark + TopAntiQuark - + - GluonType6 - GluonType6 + CausalConvexSystem + A CausalSystem whose quantum parts are all bonded to the rest of the system. + It is natural to define entities made or more than one smaller parts according to some unity criteria. One of the most general one applicable to causal systems is to ask that all the quantum parts of the system are bonded to the rest. +In other words, causal convexity excludes all quantums that leave the system (no more interacting), or that are not yet part of it (not yet interacting). +So, a photon leaving a body is not part of the body as convex system, while a photon the is carrier of electromagnetic interaction between two molecular parts of the body, is part of the convex body. + CausalConvexSystem + It is natural to define entities made or more than one smaller parts according to some unity criteria. One of the most general one applicable to causal systems is to ask that all the quantum parts of the system are bonded to the rest. +In other words, causal convexity excludes all quantums that leave the system (no more interacting), or that are not yet part of it (not yet interacting). +So, a photon leaving a body is not part of the body as convex system, while a photon the is carrier of electromagnetic interaction between two molecular parts of the body, is part of the convex body. + A CausalSystem whose quantum parts are all bonded to the rest of the system. - + - T-2 L0 M+2 I0 Θ0 N0 J0 + T-4 L0 M+1 I0 Θ0 N0 J0 - SquareMassPerSquareTimeUnit - SquareMassPerSquareTimeUnit + MassPerQuarticTimeUnit + MassPerQuarticTimeUnit - + - - - - - - - - - MassFlow - At a point in a fluid, the product of mass density and velocity. - MassFlow - https://www.wikidata.org/wiki/Q3265048 - 4-30.1 - At a point in a fluid, the product of mass density and velocity. + + Width + Length in a given direction regarded as horizontal. + The terms breadth and width are often used by convention, as distinguished from length and from height or thickness. + Breadth + Width + https://qudt.org/vocab/quantitykind/Width + https://www.wikidata.org/wiki/Q35059 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-01-20 + 3-1.2 + Length in a given direction regarded as horizontal. - - - - - EnergyImparted - Sum of energies deposited by ionizing radiation in a given volume. - EnergyImparted - https://qudt.org/vocab/quantitykind/EnergyImparted - https://www.wikidata.org/wiki/Q99526944 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-34 - 10-80.1 - Sum of energies deposited by ionizing radiation in a given volume. + + + + Widening + Widening is tensile forming to increase the circumference of a hollow body. A distinction is made between: Widening, bulging. + Weiten + Widening - - - PseudovectorMeson - A meson with total spin 1 and even parit. - PseudovectorMeson - A meson with total spin 1 and even parit. - https://en.wikipedia.org/wiki/Pseudovector_meson + + + + RotationalFrequency + Magnitude of the angular velocity ω divided by the angle 2π, thus n = |ω|/2π. + RotationalFrequency + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-01-42 + 3-17.2 + Magnitude of the angular velocity ω divided by the angle 2π, thus n = |ω|/2π. - + - - Electroplating - Electroplating + + TransportationDevice + TransportationDevice - + - - - DebyeAngularFrequency - Cut-off angular frequency in the Debye model of the vibrational spectrum of a solid. - DebyeAngularFrequency - https://qudt.org/vocab/quantitykind/DebyeAngularFrequency - https://www.wikidata.org/wiki/Q105580986 - 12-10 - Cut-off angular frequency in the Debye model of the vibrational spectrum of a solid. + + + NeutronYieldPerFission + Average number of fission neutrons, both prompt and delayed, emitted per fission event. + NeutronYieldPerFission + https://qudt.org/vocab/quantitykind/NeutronYieldPerFission + https://www.wikidata.org/wiki/Q99157909 + 10-74.1 + Average number of fission neutrons, both prompt and delayed, emitted per fission event. - + + + + + + + T-1 L+2 M0 I0 Θ0 N0 J0 + + + AreaPerTimeUnit + AreaPerTimeUnit + + + - + - - Momentum - Product of mass and velocity. - Momentum - http://qudt.org/vocab/quantitykind/Momentum - 4-8 - https://doi.org/10.1351/goldbook.M04007 - - - - - - CPlusPlus - A language object respecting the syntactic rules of C++. - C++ - CPlusPlus - A language object respecting the syntactic rules of C++. + Luminance + Measured in cd/m². Not to confuse with Illuminance, which is measured in lux (cd sr/m²). + a photometric measure of the luminous intensity per unit area of light travelling in a given direction. + Luminance + http://qudt.org/vocab/quantitykind/Luminance + https://doi.org/10.1351/goldbook.L03640 - + - - - KineticFrictionForce - Force opposing the motion of a body sliding on a surface. - DynamicFrictionForce - KineticFrictionForce - https://www.wikidata.org/wiki/Q91005629 - 4-9.4 - Force opposing the motion of a body sliding on a surface. + + + OsmoticCoefficientOfSolvent + Quantity characterizing the deviation of a solvent from ideal behavior. + OsmoticFactorOfSolvent + OsmoticCoefficientOfSolvent + https://qudt.org/vocab/quantitykind/OsmoticCoefficient + https://www.wikidata.org/wiki/Q5776102 + 9-27.2 + Quantity characterizing the deviation of a solvent from ideal behavior. + https://doi.org/10.1351/goldbook.O04342 - + - + + - - + + T-1 L+2 M+1 I0 Θ0 N-1 J0 - - - AngularVelocity - Axial vector quantity describing the rotation around an axis, with magnitude ω=|dφ/dt|, where dφ is the plane angle change during the infinitesimal time interval with duration dt, and with direction along the axis for which the rotation is clockwise. - AngularVelocity - https://qudt.org/vocab/quantitykind/AngularVelocity - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-01-41 - https://dbpedia.org/page/Angular_velocity - 3-12 - Axial vector quantity describing the rotation around an axis, with magnitude ω=|dφ/dt|, where dφ is the plane angle change during the infinitesimal time interval with duration dt, and with direction along the axis for which the rotation is clockwise. - https://en.wikipedia.org/wiki/Angular_velocity + + EnergyTimePerAmountUnit + EnergyTimePerAmountUnit - + - + - - IonNumberDensity - Number of ions per volume. - IonDensity - IonNumberDensity - https://www.wikidata.org/wiki/Q98831218 - 10-62.2 - Number of ions per volume. + + MagneticFieldStrength + Strength of a magnetic field. Commonly denoted H. + MagnetizingFieldStrength + MagneticFieldStrength + http://qudt.org/vocab/quantitykind/MagneticFieldStrength + https://www.wikidata.org/wiki/Q28123 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-56 + 6-25 + https://doi.org/10.1351/goldbook.M03683 - + - + + + SuperconductionTransitionTemperature + Critical thermodynamic temperature of a superconductor. + SuperconductionTransitionTemperature + https://qudt.org/vocab/quantitykind/SuperconductionTransitionTemperature + https://www.wikidata.org/wiki/Q106103037 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=815-10-09 + 12-35.3 + Critical thermodynamic temperature of a superconductor. + + + + + - - - T0 L+2 M0 I0 Θ+1 N0 J0 - + + + + + + - AreaTemperatureUnit - AreaTemperatureUnit + + + + + + + + + + + ClassicallyDefinedMaterial + ClassicallyDefinedMaterial - + - + + + UpperCriticalMagneticFluxDensity + For type II superconductors, the threshold magnetic flux density for disappearance of bulk superconductivity. + UpperCriticalMagneticFluxDensity + https://qudt.org/vocab/quantitykind/UpperCriticalMagneticFluxDensity + https://www.wikidata.org/wiki/Q106127634 + 12-36.3 + For type II superconductors, the threshold magnetic flux density for disappearance of bulk superconductivity. + + + + + + ConventionalProperty + A property that is associated to an object by convention, or assumption. + A quantitative property attributed by agreement to a quantity for a given purpose. + ConventionalProperty + A quantitative property attributed by agreement to a quantity for a given purpose. + The thermal conductivity of a copper sample in my laboratory can be assumed to be the conductivity that appears in the vendor specification. This value has been obtained by measurement of a sample which is not the one I have in my laboratory. This conductivity value is then a conventional quantitiative property assigned to my sample through a semiotic process in which no actual measurement is done by my laboratory. + +If I don't believe the vendor, then I can measure the actual thermal conductivity. I then perform a measurement process that semiotically assign another value for the conductivity, which is a measured property, since is part of a measurement process. + +Then I have two different physical quantities that are properties thanks to two different semiotic processes. + + + + + + - - + + T+3 L-2 M-1 I+1 Θ0 N0 J0 - - - - Acceleration - Derivative of velocity with respect to time. - Acceleration - http://qudt.org/vocab/quantitykind/Acceleration - 3-9.1 - https://doi.org/10.1351/goldbook.A00051 + + ElectricCurrentPerUnitEnergyUnit + ElectricCurrentPerUnitEnergyUnit - + - - - MechanicalEfficiency - Quotient of mechanical output and input power. - MechanicalEfficiency - https://www.wikidata.org/wiki/Q2628085 - 4-29 - Quotient of mechanical output and input power. + + + RestEnergy + E_0 = m_0 * c_0^2 + +where m_0 is the rest mass of that particle and c_0 is the speed of light in a vacuum. + Product of the rest mass and the square of the speed of light in vacuum. + RestEnergy + https://www.wikidata.org/wiki/Q11663629 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-05 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-04-17 + 10-3 + Product of the rest mass and the square of the speed of light in vacuum. + E_0 = m_0 * c_0^2 + +where m_0 is the rest mass of that particle and c_0 is the speed of light in a vacuum. + https://en.wikipedia.org/wiki/Invariant_mass#Rest_energy - + - - HalfLife - Mean duration required for the decay of one half of the atoms or nuclei. - HalfLife - https://qudt.org/vocab/quantitykind/Half-Life - https://www.wikidata.org/wiki/Q98118544 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-12 - 10-31 - Mean duration required for the decay of one half of the atoms or nuclei. + + LandeFactor + Quotient of the magnetic dipole moment of an atom, and the product of the total angular momentum quantum number and the Bohr magneton. + GFactorOfAtom + LandeFactor + https://qudt.org/vocab/quantitykind/LandeGFactor + https://www.wikidata.org/wiki/Q1191684 + 10-14.1 + Quotient of the magnetic dipole moment of an atom, and the product of the total angular momentum quantum number and the Bohr magneton. - + - - - - - - - - + + + + + + + + + + + + + + + MetrologicalSymbol + A symbol that stands for a concept in the language of the meterological domain of ISO 80000. + MetrologicalSymbol + A symbol that stands for a concept in the language of the meterological domain of ISO 80000. + + + + + + + + + + + + + GasSolution + A gaseous solution made of more than one component type. + GasMixture + GasSolution + A gaseous solution made of more than one component type. + + + + - - + + - - - Measurement - A measurement always implies a causal interaction between the object and the observer. - A measurement is the process of experimentally obtaining one or more measurement results that can reasonably be attributed to a quantity. - An 'observation' that results in a quantitative comparison of a 'property' of an 'object' with a standard reference based on a well defined mesurement procedure. - Measurement - An 'observation' that results in a quantitative comparison of a 'property' of an 'object' with a standard reference based on a well defined mesurement procedure. - measurement + + + + + + + + + + SpatioTemporalTessellation + A tessellation in which all tiles are connected through spatiotemporal relations hasNext or contacts. + WellFormedTessellation + SpatioTemporalTessellation + A tessellation in which all tiles are connected through spatiotemporal relations hasNext or contacts. - - - - SpecificInternalEnergy - Internal energy per unit mass. - SpecificInternalEnergy - https://qudt.org/vocab/quantitykind/SpecificInternalEnergy - https://www.wikidata.org/wiki/Q76357367 - 5-21.2 - Internal energy per unit mass. + + + Datum + A self-consistent encoded data entity. + Datum + A self-consistent encoded data entity. + A character, a bit, a song in a CD. - + - - - GrueneisenParamter - Describes the effect that changing the volume of a crystal lattice has on its vibrational properties, and, as a consequence, the effect that changing temperature has on the size or dynamics of the lattice. - GrueneisenParamter - https://www.wikidata.org/wiki/Q444656 - 12-14 - Describes the effect that changing the volume of a crystal lattice has on its vibrational properties, and, as a consequence, the effect that changing temperature has on the size or dynamics of the lattice. + + + LinearIonization + Differential quotient of q with respect to l, where q is the average total charge of all positive ions produced by an ionizing charged particle over a path l, divided by the elementary charge. + LinearIonization + https://qudt.org/vocab/quantitykind/LinearIonization + https://www.wikidata.org/wiki/Q98690755 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-03-115 + 10-58 + Differential quotient of q with respect to l, where q is the average total charge of all positive ions produced by an ionizing charged particle over a path l, divided by the elementary charge. - - - - ConductometricTitration - - The equivalence-point is obtained as the intersection of linear parts of the conductance G, versus titrant volume V, curve (see - The method can be used for deeply coloured or turbid solutions. Acid-base and precipita- tion reactions are most frequently used. - The method is based on replacing an ionic species of the analyte with another species, cor- responding to the titrant or the product with significantly different conductance. - titration in which the electric conductivity of a solution is measured as a function of the amount of titrant added - ConductometricTitration - https://www.wikidata.org/wiki/Q11778221 - titration in which the electric conductivity of a solution is measured as a function of the amount of titrant added - https://doi.org/10.1515/pac-2018-0109 + + + BlueUpAntiQuark + BlueUpAntiQuark - - - - FatigueTesting - - Fatigue testing is a specialised form of mechanical testing that is performed by applying cyclic loading to a coupon or structure. These tests are used either to generate fatigue life and crack growth data, identify critical locations or demonstrate the safety of a structure that may be susceptible to fatigue. - FatigueTesting - Fatigue testing is a specialised form of mechanical testing that is performed by applying cyclic loading to a coupon or structure. These tests are used either to generate fatigue life and crack growth data, identify critical locations or demonstrate the safety of a structure that may be susceptible to fatigue. + + + + + + + T-2 L0 M+1 I-1 Θ0 N0 J0 + + + MagneticFluxDensityUnit + MagneticFluxDensityUnit - - - - DefinedEdgeCutting - Machining in which a tool is used whose number of cutting edges, geometry of the cutting wedges and position of the cutting edges in relation to the workpiece are determined - Spanen mit geometrisch bestimmten Schneiden - DefinedEdgeCutting + + + + + SubObject + An object which is an holistic temporal part of another object. + Here we consider a temporal interval that is lower than the characteristic time of the physical process that provides the causality connection between the object parts. + SubObject + An object which is an holistic temporal part of another object. + If an inhabited house is considered as an house that is occupied by some people in its majority of time, then an interval of inhabited house in which occasionally nobody is in there is no more an inhabited house, but an unhinabited house, since this temporal part does not satisfy the criteria of the whole. - - - - ScanningProbeMicroscopy - - Scanning probe microscopy (SPM) is a branch of microscopy that forms images of surfaces using a physical probe that scans the specimen. - ScanningProbeMicroscopy - Scanning probe microscopy (SPM) is a branch of microscopy that forms images of surfaces using a physical probe that scans the specimen. + + + + Determined + Determined - + - - - Rotation - Rotation - https://www.wikidata.org/wiki/Q76435127 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=102-05-22 - 3-16 - - - - - - SubjectiveProperty - A quantity whos value that cannot be univocally determined and depends on an agent (e.g. a human individual, a community). - SubjectiveProperty - A quantity whos value that cannot be univocally determined and depends on an agent (e.g. a human individual, a community). - The measure of beauty on a scale from 1 to 10. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - GreenAntiQuark - GreenAntiQuark + + + PartialPressure + Hypothetical pressure of gas if it alone occupied the volume of the mixture at the same temperature. + PartialPressure + https://qudt.org/vocab/quantitykind/PartialPressure + https://www.wikidata.org/wiki/Q27165 + 9-19 + Hypothetical pressure of gas if it alone occupied the volume of the mixture at the same temperature. + https://doi.org/10.1351/goldbook.P04420 - + + + + Painting + Painting + + + - - CalibrationData - Calibration data are used to provide correction of measured data or perform uncertainty calculations. They are generally the result of a measuerement on a reference specimen. - CalibrationData - Calibration data are used to provide correction of measured data or perform uncertainty calculations. They are generally the result of a measuerement on a reference specimen. + + Nexafs + + Near edge X-ray absorption fine structure (NEXAFS), also known as X-ray absorption near edge structure (XANES), is a type of absorption spectroscopy that indicates the features in the X-ray absorption spectra (XAS) of condensed matter due to the photoabsorption cross section for electronic transitions from an atomic core level to final states in the energy region of 50–100 eV above the selected atomic core level ionization energy, where the wavelength of the photoelectron is larger than the interatomic distance between the absorbing atom and its first neighbour atoms. + Nexafs + Near edge X-ray absorption fine structure (NEXAFS), also known as X-ray absorption near edge structure (XANES), is a type of absorption spectroscopy that indicates the features in the X-ray absorption spectra (XAS) of condensed matter due to the photoabsorption cross section for electronic transitions from an atomic core level to final states in the energy region of 50–100 eV above the selected atomic core level ionization energy, where the wavelength of the photoelectron is larger than the interatomic distance between the absorbing atom and its first neighbour atoms. - - - - SystemUnit - SystemUnit + + + + + CouplingFactor + InductiveCouplingFactor + CouplingFactor + https://www.wikidata.org/wiki/Q78101715 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-41 + 6-42.1 - + + + + + + T+3 L-2 M-1 I0 Θ+1 N0 J0 + + + ThermalResistanceUnit + ThermalResistanceUnit + + + + - - + + + + + + - - ReciprocalDuration - InverseDuration - InverseTime - ReciprocalTime - ReciprocalDuration - https://qudt.org/vocab/quantitykind/InverseTime - https://www.wikidata.org/wiki/Q98690850 + Uncoded + A conventional that provides no possibility to infer the characteristics of the object to which it refers. + Uncoded + A conventional that provides no possibility to infer the characteristics of the object to which it refers. + A random generated id for a product. - + - - - StaticFrictionForce - StaticFriction - StaticFrictionForce - https://qudt.org/vocab/quantitykind/StaticFriction - https://www.wikidata.org/wiki/Q90862568 - 4-9.3 + + + DegreeOfDissociation + Dissociation may occur stepwise. + ratio of the number of dissociation events to the maximum number of theoretically possible dissociation events. + DissociationFraction + DegreeOfDissociation + https://qudt.org/vocab/quantitykind/DegreeOfDissociation + https://www.wikidata.org/wiki/Q907334 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-01-09 + 9-43 + ratio of the number of dissociation events to the maximum number of theoretically possible dissociation events. + https://doi.org/10.1351/goldbook.D01566 - - - - - - - - - - - - - - WeakBoson - WeakBoson + + + + ThermochemicalTreatment + ThermochemicalTreatment - - - - CentreOfMass - In non-relativistic physics, the centre of mass doesn’t depend on the chosen reference frame. - The unique point where the weighted relative position of the distributed mass of an Item sums to zero. Equivalently, it is the point where if a force is applied to the Item, causes the Item to move in direction of force without rotation. - CentreOfMass - The unique point where the weighted relative position of the distributed mass of an Item sums to zero. Equivalently, it is the point where if a force is applied to the Item, causes the Item to move in direction of force without rotation. - https://en.wikipedia.org/wiki/Center_of_mass + + + RedUpQuark + RedUpQuark - + - - GrowingCrystal - GrowingCrystal + + VaporDeposition + VaporDeposition - + + + PhysicalyUnbonded + PhysicalyUnbonded + + + - + + - - + + T-2 L+2 M+1 I0 Θ0 N0 J0 - - - - MagnetomotiveForce - Scalar line integral of the magnetic field strength along a closed path. - MagnetomotiveForce - https://qudt.org/vocab/quantitykind/MagnetomotiveForce - https://www.wikidata.org/wiki/Q1266982 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-60 - 6-37.3 - Scalar line integral of the magnetic field strength along a closed path. + + EnergyUnit + EnergyUnit - - - - - TotalIonization - Quotient of the total mean charge of all positive ions produced by an ionizing charged particle along its entire path and along the paths of any secondary charged particles, and the elementary charge. - TotalIonization - https://qudt.org/vocab/quantitykind/TotalIonization - https://www.wikidata.org/wiki/Q98690787 - 10-59 - Quotient of the total mean charge of all positive ions produced by an ionizing charged particle along its entire path and along the paths of any secondary charged particles, and the elementary charge. + + + + ElectrochemicalImpedanceSpectroscopy + + Impedimetric sensors are based on measurement of a concentration-dependent parameter taken from analysis of the respective electrochemical impedance spectra, or from the impedance magnitudes at a chosen fixed frequency. + The sinusoidal current response lags behind the sinusoidal voltage perturbation by a phase angle φ. Resistances (e.g. to charge transfer) give a response in phase with the voltage perturbation; capacitances (e.g. double layer) give a response 90° out of phase; combinations of resistances and capacitances give phase angles between 0 and 90°. Plots of the out of phase vs. the in phase component of the impedance for all the frequencies tested are called complex plane (or Nyquist) plots. Plots of the phase angle and the magnitude of the impedance vs. the logarithm of perturbation frequency are called Bode diagrams. Complex plane plots are the more commonly used for electrochemical sensors. + electrochemical measurement method of the complex impedance of an electrochemical system as a function of the frequency of a small amplitude (normally 5 to 10 mV) sinusoidal voltage perturbation superimposed on a fixed value of applied potential or on the open circuit potential + EIS + ElectrochemicalImpedanceSpectroscopy + https://www.wikidata.org/wiki/Q3492904 + electrochemical measurement method of the complex impedance of an electrochemical system as a function of the frequency of a small amplitude (normally 5 to 10 mV) sinusoidal voltage perturbation superimposed on a fixed value of applied potential or on the open circuit potential + https://doi.org/10.1515/pac-2018-0109 - + + + + Exafs + + Extended X-ray absorption fine structure (EXAFS), along with X-ray absorption near edge structure (XANES), is a subset of X-ray absorption spectroscopy (XAS). Like other absorption spectroscopies, XAS techniques follow Beer's law. The X-ray absorption coefficient of a material as a function of energy is obtained by directing X-rays of a narrow energy range at a sample, while recording the incident and transmitted x-ray intensity, as the incident x-ray energy is incremented. +When the incident x-ray energy matches the binding energy of an electron of an atom within the sample, the number of x-rays absorbed by the sample increases dramatically, causing a drop in the transmitted x-ray intensity. This results in an absorption edge. Every element has a set of unique absorption edges corresponding to different binding energies of its electrons, giving XAS element selectivity. XAS spectra are most often collected at synchrotrons because of the high intensity of synchrotron X-ray sources allow the concentration of the absorbing element to reach as low as a few parts per million. Absorption would be undetectable if the source is too weak. Because X-rays are highly penetrating, XAS samples can be gases, solids or liquids. + Exafs + Extended X-ray absorption fine structure (EXAFS), along with X-ray absorption near edge structure (XANES), is a subset of X-ray absorption spectroscopy (XAS). Like other absorption spectroscopies, XAS techniques follow Beer's law. The X-ray absorption coefficient of a material as a function of energy is obtained by directing X-rays of a narrow energy range at a sample, while recording the incident and transmitted x-ray intensity, as the incident x-ray energy is incremented. +When the incident x-ray energy matches the binding energy of an electron of an atom within the sample, the number of x-rays absorbed by the sample increases dramatically, causing a drop in the transmitted x-ray intensity. This results in an absorption edge. Every element has a set of unique absorption edges corresponding to different binding energies of its electrons, giving XAS element selectivity. XAS spectra are most often collected at synchrotrons because of the high intensity of synchrotron X-ray sources allow the concentration of the absorbing element to reach as low as a few parts per million. Absorption would be undetectable if the source is too weak. Because X-rays are highly penetrating, XAS samples can be gases, solids or liquids. + + + + + + ThermomechanicalTreatment + ThermomechanicalTreatment + + + - - MagneticPolarisation - Vector quantity equal to the product of the magnetization M and the magnetic constant μ0. - MagneticPolarisation - https://qudt.org/vocab/quantitykind/MagneticPolarization - https://www.wikidata.org/wiki/Q856711 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-54 - 6-29 - Vector quantity equal to the product of the magnetization M and the magnetic constant μ0. + + SpecificHeatCapacityAtSaturatedVaporPressure + Specific heat capacity at saturated vaport pressure. + SpecificHeatCapacityAtSaturatedVaporPressure + https://qudt.org/vocab/quantitykind/SpecificHeatCapacityAtSaturation + https://www.wikidata.org/wiki/Q75775005 + 5-16.4 + Specific heat capacity at saturated vaport pressure. + + + + + + + + + + + + + CondensedMatter + The subject of condensed matter physics that deals with the macroscopic and microscopic physical properties of matter, especially the solid and liquid phases which arise from electromagnetic forces between atoms. More generally, the subject deals with "condensed" phases of matter: systems of many constituents with strong interactions between them. + CondensedMatter + The subject of condensed matter physics that deals with the macroscopic and microscopic physical properties of matter, especially the solid and liquid phases which arise from electromagnetic forces between atoms. More generally, the subject deals with "condensed" phases of matter: systems of many constituents with strong interactions between them. + + + + + + MaterialLaw + A law that provides a connection between a material property and other properties of the object. + MaterialLaw + A law that provides a connection between a material property and other properties of the object. - - - RedDownAntiQuark - RedDownAntiQuark + + + + + + + + + + + Magnetization + At a given point within a domain of quasi-infinitesimal volume V, vector quantity equal to the magnetic area moment m of the substance contained within the domain divided by the volume V. + Magnetization + https://qudt.org/vocab/quantitykind/Magnetization + https://www.wikidata.org/wiki/Q856711 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-52 + 6-24 + At a given point within a domain of quasi-infinitesimal volume V, vector quantity equal to the magnetic area moment m of the substance contained within the domain divided by the volume V. - - - - Widening - Widening is tensile forming to increase the circumference of a hollow body. A distinction is made between: Widening, bulging. - Weiten - Widening + + + + AtomProbeTomography + Atom Probe Tomography (APT or 3D Atom Probe) is the only material analysis technique offering extensive capabilities for both 3D imaging and chemical composition measurements at the atomic scale (around 0.1-0.3nm resolution in depth and 0.3-0.5nm laterally). Since its early developments, Atom Probe Tomography has contributed to major advances in materials science. The sample is prepared in the form of a very sharp tip. The cooled tip is biased at high DC voltage (3-15 kV). The very small radius of the tip and the High Voltage induce a very high electrostatic field (tens V/nm) at the tip surface, just below the point of atom evaporation. Under laser or HV pulsing, one or more atoms are evaporated from the surface, by field effect (near 100% ionization), and projected onto a Position Sensitive Detector (PSD) with a very high detection efficiency. Ion efficiencies are as high as 80%, the highest analytical efficiency of any 3D microscopy. + 3D Atom Probe + APT + AtomProbeTomography + Atom Probe Tomography (APT or 3D Atom Probe) is the only material analysis technique offering extensive capabilities for both 3D imaging and chemical composition measurements at the atomic scale (around 0.1-0.3nm resolution in depth and 0.3-0.5nm laterally). Since its early developments, Atom Probe Tomography has contributed to major advances in materials science. The sample is prepared in the form of a very sharp tip. The cooled tip is biased at high DC voltage (3-15 kV). The very small radius of the tip and the High Voltage induce a very high electrostatic field (tens V/nm) at the tip surface, just below the point of atom evaporation. Under laser or HV pulsing, one or more atoms are evaporated from the surface, by field effect (near 100% ionization), and projected onto a Position Sensitive Detector (PSD) with a very high detection efficiency. Ion efficiencies are as high as 80%, the highest analytical efficiency of any 3D microscopy. - + - T-2 L+3 M+1 I0 Θ0 N0 J0 + T-1 L-2 M0 I0 Θ0 N+1 J0 - ForceAreaUnit - ForceAreaUnit + AmountPerAreaTimeUnit + AmountPerAreaTimeUnit - - - - CharacterisationEnvironmentProperty - - CharacterisationEnvironmentProperty + + + + + + + + + + + MagneticReluctance + Magnetic tension divided by magnetic flux. + Reluctance + MagneticReluctance + https://qudt.org/vocab/quantitykind/Reluctance + https://www.wikidata.org/wiki/Q863390 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-28 + 6-39 + Magnetic tension divided by magnetic flux. - - - - Dismantling - action to disassemble a product or a component by removing all or some of its constituent parts with the intent to salvage - Demontage - Dismantling - action to disassemble a product or a component by removing all or some of its constituent parts with the intent to salvage + + + + SystemProgram + System program refers to operating systems and utility programs that manage computer resources at a low level enabling a computer to function. + SystemProgram + System program refers to operating systems and utility programs that manage computer resources at a low level enabling a computer to function. + An operating system. A graphic driver. - - - - - - - T+3 L0 M-1 I0 Θ+1 N0 J0 - - - PerThermalTransmittanceUnit - PerThermalTransmittanceUnit + + + GreenStrangeQuark + GreenStrangeQuark - - - - - - - - - - - CompositeBoson - CompositeBoson - Examples of composite particles with integer spin: -spin 0: H1 and He4 in ground state, pion -spin 1: H1 and He4 in first excited state, meson -spin 2: O15 in ground state. + + + ElectronicModel + A physics-based model based on a physics equation describing the behaviour of electrons. + ElectronicModel + A physics-based model based on a physics equation describing the behaviour of electrons. + Density functional theory. +Hartree-Fock. - - - - - ElectronMass - The rest mass of an electron. - ElectronMass - http://qudt.org/vocab/constant/ElectronMass - https://doi.org/10.1351/goldbook.E02008 + + + + + + + + + + + + + + + + + + + CharmQuark + CharmQuark + https://en.wikipedia.org/wiki/Charm_quark - + - - HPPC + + SecondaryIonMassSpectrometry - electrochemical method that measures the voltage drop of a cell resulting from a square wave current load - HybridPulsePowerCharacterisation - HybridPulsePowerCharacterization - HPPC - electrochemical method that measures the voltage drop of a cell resulting from a square wave current load + Secondary-ion mass spectrometry (SIMS) is a technique used to analyze the composition of solid surfaces and thin films by sputtering the surface of the specimen with a focused primary ion beam and collecting and analyzing ejected secondary ions. + SIMS + SecondaryIonMassSpectrometry + Secondary-ion mass spectrometry (SIMS) is a technique used to analyze the composition of solid surfaces and thin films by sputtering the surface of the specimen with a focused primary ion beam and collecting and analyzing ejected secondary ions. - + - - + - - T-2 L-2 M+1 I0 Θ0 N0 J0 + + - - MassPerSquareLengthSquareTimeUnit - MassPerSquareLengthSquareTimeUnit - + + + + CelsiusTemperature + An objective comparative measure of hot or cold. - - - - MachineCell - A group of machineries used to process a group of similar parts. - Is not simply a collection of machineries, since the connection between them is due to the parallel flow of processed parts that comes from a unique source and ends into a common repository. - MachineCell - A group of machineries used to process a group of similar parts. - +Temperature is a relative quantity that can be used to express temperature differences. Unlike ThermodynamicTemperature, it cannot express absolute temperatures. + CelsiusTemperature + http://qudt.org/vocab/quantitykind/CelciusTemperature + 5-2 + An objective comparative measure of hot or cold. - - - - ManufacturingSystem - A system arranged to setup a specific manufacturing process. - ManufacturingSystem - A system arranged to setup a specific manufacturing process. +Temperature is a relative quantity that can be used to express temperature differences. Unlike ThermodynamicTemperature, it cannot express absolute temperatures. + https://doi.org/10.1351/goldbook.T06261 - - - - SpeedFractionUnit - Unit for quantities of dimension one that are the fraction of two speeds. - SpeedFractionUnit - Unit for quantities of dimension one that are the fraction of two speeds. - Unit for refractive index. + + + + GalvanostaticIntermittentTitrationTechnique + + electrochemical method that applies current pulses to an electrochemical cell at rest and measures the voltage response + GITT + GalvanostaticIntermittentTitrationTechnique + https://www.wikidata.org/wiki/Q120906986 + electrochemical method that applies current pulses to an electrochemical cell at rest and measures the voltage response - + - TensorMeson - A meson with spin two. - TensorMeson - A meson with spin two. + + Homonuclear + A molecule composed of only one element type. + ElementalMolecule + Homonuclear + A molecule composed of only one element type. + Hydrogen molecule (H₂). - - - ZBoson - An uncharged vector boson that mediate the weak interaction. - Z bosons are their own antiparticles. - NeutralWeakBoson - ZBoson - An uncharged vector boson that mediate the weak interaction. - Z bosons are their own antiparticles. - https://en.wikipedia.org/wiki/W_and_Z_bosons + + + + + + + T-2 L+1 M+1 I-1 Θ0 N0 J0 + + + MagneticPotentialUnit + MagneticPotentialUnit - - - - DynamicMechanicalAnalysis - - Dynamic mechanical analysis (abbreviated DMA) is a characterisation technique where a sinusoidal stress is applied and the strain in the material is measured, allowing one to determine the complex modulus. The temperature of the sample or the frequency of the stress are often varied, leading to variations in the complex modulus; this approach can be used to locate the glass transition temperature[1] of the material, as well as to identify transitions corresponding to other molecular motions. - DynamicMechanicalAnalysis - Dynamic mechanical analysis (abbreviated DMA) is a characterisation technique where a sinusoidal stress is applied and the strain in the material is measured, allowing one to determine the complex modulus. The temperature of the sample or the frequency of the stress are often varied, leading to variations in the complex modulus; this approach can be used to locate the glass transition temperature[1] of the material, as well as to identify transitions corresponding to other molecular motions. + + + GluonType4 + GluonType4 - - - - FormingBlasting - Shot peening is shot peening for shaping or straightening workpieces by introducing residual compressive stresses (from: DIN 8200/10.82). - Umformstrahlen - FormingBlasting + + + NeutralAtom + A standalone atom that has no net charge. + NeutralAtom + A standalone atom that has no net charge. - + - + + - - + + T-2 L+4 M0 I0 Θ0 N0 J0 - - - AngularAcceleration - vector quantity giving the rate of change of angular velocity - AngularAcceleration - https://qudt.org/vocab/quantitykind/AngularAcceleration - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-01-46 - https://dbpedia.org/page/Angular_acceleration - 3-13 - vector quantity giving the rate of change of angular velocity - https://en.wikipedia.org/wiki/Angular_acceleration - - - - - - FlexuralForming - Forming of a solid body, whereby the plastic state is essentially brought about by a bending stress. - Biegeumformen - FlexuralForming + + MassStoppingPowerUnit + MassStoppingPowerUnit - + - - - - - - + + + + + + + + + + + + - Hadron - Particles composed of two or more quarks. - Hadron - Particles composed of two or more quarks. - https://en.wikipedia.org/wiki/Hadron - - - - - - ProductionSystem - A network of objects that implements a production process through a series of interconnected elements. - ProductionSystem - A network of objects that implements a production process through a series of interconnected elements. + AntiMatter + Antimatter is matter that is composed only of the antiparticles of those that constitute ordinary matter. + This branch is not expanded due to the limited use of such entities. + AntiMatter + Antimatter is matter that is composed only of the antiparticles of those that constitute ordinary matter. + This branch is not expanded due to the limited use of such entities. - + - - - SlowingDownLength - Square root of the slowing down area. - SlowingDownLength - https://qudt.org/vocab/quantitykind/Slowing-DownLength - https://www.wikidata.org/wiki/Q98996963 - 10-73.1 - Square root of the slowing down area. - - - - - - ContinuousCasting - ContinuousCasting + + + AbsoluteHumidity + Mass of the contained water vapour per volume. + MassConcentrationOfWaterVapour + AbsoluteHumidity + https://qudt.org/vocab/quantitykind/AbsoluteHumidity + https://qudt.org/vocab/quantitykind/MassConcentrationOfWaterVapour + https://www.wikidata.org/wiki/Q76378808 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-60 + 5-28 + Mass of the contained water vapour per volume. - - - - - - Guess - A guess is a theory, estimated and subjective, since its premises are subjective. - Guess - A guess is a theory, estimated and subjective, since its premises are subjective. + + + GluonType3 + GluonType3 - - - Estimated - Estimated - The biography of a person that the author have not met. + + + + + SerialStep + SerialStep - + - - - AngularWaveNumber - In condensed matter physics, quotient of momentum and the reduced Planck constant. - AngularRepetency - AngularWaveNumber - https://qudt.org/vocab/quantitykind/AngularWavenumber - https://www.wikidata.org/wiki/Q105542089 - 12-9.1 - In condensed matter physics, quotient of momentum and the reduced Planck constant. + + + + + T0 L+2 M-1 I0 Θ0 N0 J0 + + + AreaPerMassUnit + AreaPerMassUnit - - - - Filling - Filling + + + SpatiallyRedundant + A whole with spatial parts of its same type. + SpatiallyRedundant + A whole with spatial parts of its same type. - - - - SourceVoltage - Voltage between the two terminals of a voltage source when there is no electric current through the source. - SourceTension - SourceVoltage - https://qudt.org/vocab/quantitykind/SourceVoltage - https://www.wikidata.org/wiki/Q185329 - 6-36 - Voltage between the two terminals of a voltage source when there is no electric current through the source. - + + + + IsothermalMicrocalorimetry + + Isothermal microcalorimetry (IMC) is a laboratory method for real-time monitoring and dynamic analysis of chemical, physical and biological processes. Over a period of hours or days, IMC determines the onset, rate, extent and energetics of such processes for specimens in small ampoules (e.g. 3–20 ml) at a constant set temperature (c. 15 °C–150 °C). - - - - - Spin - Vector quantity expressing the internal angular momentum of a particle or a particle system. - Spin - https://qudt.org/vocab/quantitykind/Spin - https://www.wikidata.org/wiki/Q133673 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-05-09 - 10-10 - Vector quantity expressing the internal angular momentum of a particle or a particle system. +IMC accomplishes this dynamic analysis by measuring and recording vs. elapsed time the net rate of heat flow (μJ/s = μW) to or from the specimen ampoule, and the cumulative amount of heat (J) consumed or produced. + IMC + IsothermalMicrocalorimetry + Isothermal microcalorimetry (IMC) is a laboratory method for real-time monitoring and dynamic analysis of chemical, physical and biological processes. Over a period of hours or days, IMC determines the onset, rate, extent and energetics of such processes for specimens in small ampoules (e.g. 3–20 ml) at a constant set temperature (c. 15 °C–150 °C). + +IMC accomplishes this dynamic analysis by measuring and recording vs. elapsed time the net rate of heat flow (μJ/s = μW) to or from the specimen ampoule, and the cumulative amount of heat (J) consumed or produced. - - - - - StatisticalWeightOfSubsystem - StatisticalWeightOfSubsystem - https://www.wikidata.org/wiki/Q96207431 - 9-36.1 + + + + + + + T-2 L+2 M+1 I0 Θ0 N-1 J0 + + + EnergyPerAmountUnit + EnergyPerAmountUnit - - - BlueCharmAntiQuark - BlueCharmAntiQuark + + + + + + + T+2 L-5 M-1 I0 Θ0 N0 J0 + + + EnergyDensityOfStatesUnit + EnergyDensityOfStatesUnit - + - - - NonLeakageProbability - Probability that a neutron will not escape from the reactor during the slowing-down process or while it diffuses as a thermal neutron. - NonLeakageProbability - https://qudt.org/vocab/quantitykind/Non-LeakageProbability - https://www.wikidata.org/wiki/Q99415566 - 10-77 - Probability that a neutron will not escape from the reactor during the slowing-down process or while it diffuses as a thermal neutron. - - - - - - AccessConditions - Describes what is needed to repeat the experiment - AccessConditions - Describes what is needed to repeat the experiment - In case of national or international facilities such as synchrotrons describe the programme that enabled you to access these. Was the access to your characterisation tool an inhouse routine or required a 3rd party service? Was the access to your sample preparation an inhouse routine or required a 3rd party service? + + + + + + + + + Acceleration + Derivative of velocity with respect to time. + Acceleration + http://qudt.org/vocab/quantitykind/Acceleration + 3-9.1 + https://doi.org/10.1351/goldbook.A00051 - + - + - + - + @@ -20544,654 +19980,626 @@ spin 2: O15 in ground state. + DownQuark + DownQuark + https://en.wikipedia.org/wiki/Down_quark + + + + - + - + - Quark - The class of individuals that stand for quarks elementary particles. - Quark - The class of individuals that stand for quarks elementary particles. - https://en.wikipedia.org/wiki/Quark + ElementaryParticle + A chausal chain whose quantum parts are of the same standard model fundamental type. + An elementary particle is a causal chain of quantum entities of the same type. For example, an elementary electron is a sequence of fundamental electrons only. + SingleParticleChain + ElementaryParticle + An elementary particle is a causal chain of quantum entities of the same type. For example, an elementary electron is a sequence of fundamental electrons only. + A chausal chain whose quantum parts are of the same standard model fundamental type. - + + + + + + + T-1 L0 M0 I0 Θ+2 N0 J0 + + + SquareTemperaturePerTimeUnit + SquareTemperaturePerTimeUnit + + + + + + + + + T+3 L-3 M-1 I+2 Θ0 N0 J0 + + + ElectricConductivityUnit + ElectricConductivityUnit + + + - + - - VolumeFlowRate - Quantity equal to the volume dV of substance crossing a given surface during a time interval with infinitesimal duration dt, divided by this duration, thus qV = dV / dt- - VolumetricFlowRate - VolumeFlowRate - https://qudt.org/vocab/quantitykind/VolumeFlowRate - https://www.wikidata.org/wiki/Q1134348 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-72 - 4-31 - Quantity equal to the volume dV of substance crossing a given surface during a time interval with infinitesimal duration dt, divided by this duration, thus qV = dV / dt- - https://en.wikipedia.org/wiki/Volumetric_flow_rate + SurfaceTension + 4-26 + SurfaceTension + https://qudt.org/vocab/quantitykind/SurfaceTension + https://www.wikidata.org/wiki/Q170749 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-42 + https://doi.org/10.1351/goldbook.S06192 - + + + + Magnetizing + Magnetizing + + + - T-1 L0 M0 I0 Θ+2 N0 J0 + T-2 L-1 M+1 I0 Θ-1 N0 J0 - SquareTemperaturePerTimeUnit - SquareTemperaturePerTimeUnit + PressurePerTemperatureUnit + PressurePerTemperatureUnit - + - + + - - + + T-2 L+2 M+1 I-2 Θ0 N0 J0 - - - FineStructureConstant - A fundamental physical constant characterizing the strength of the electromagnetic interaction between elementary charged particles. - FineStructureConstant - http://qudt.org/vocab/constant/FineStructureConstant - https://doi.org/10.1351/goldbook.F02389 + + InductanceUnit + InductanceUnit - + - - LinearScanVoltammetry - - LSV corresponds to the first half cycle of cyclic voltammetry. - The peak current is expressed by the Randles-Ševčík equation. - The scan is usually started at a potential where no electrode reaction occurs. - Voltammetry in which the current is recorded as the electrode potential is varied linearly with time. - LSV - LinearPolarization - LinearSweepVoltammetry - LinearScanVoltammetry - https://www.wikidata.org/wiki/Q620700 - Voltammetry in which the current is recorded as the electrode potential is varied linearly with time. - https://en.wikipedia.org/wiki/Linear_sweep_voltammetry - https://doi.org/10.1515/pac-2018-0109 + + WearTesting + A wear test measures the changes in conditions caused by friction, and the result is obtained from deformation, scratches, and indentations on the interacting surfaces. Wear is defined as the progressive removal of the material from a solid surface and manifested by a change in the geometry of the surface. + WearTesting + A wear test measures the changes in conditions caused by friction, and the result is obtained from deformation, scratches, and indentations on the interacting surfaces. Wear is defined as the progressive removal of the material from a solid surface and manifested by a change in the geometry of the surface. - + - - - DebyeAngularWaveNumber - Cut-off angular wavenumber in the Debye model of the vibrational spectrum of a solid. - DebyeAngluarRepetency - DebyeAngularWaveNumber - https://qudt.org/vocab/quantitykind/DebyeAngularWavenumber - https://www.wikidata.org/wiki/Q105554370 - 12-9.3 - Cut-off angular wavenumber in the Debye model of the vibrational spectrum of a solid. + + + + + T-3 L+2 M+1 I-1 Θ-1 N0 J0 + + + ElectricPotentialPerTemperatureUnit + ElectricPotentialPerTemperatureUnit - + + + + + + Guess + A guess is a theory, estimated and subjective, since its premises are subjective. + Guess + A guess is a theory, estimated and subjective, since its premises are subjective. + + + - + - - - ElectromagneticEnergyDensity - Arithmetic average of (electric field strength multiplied by electric flux density) and (magnetic field strength multiplied by magnetic flux density) - VolumicElectromagneticEnergy - ElectromagneticEnergyDensity - https://qudt.org/vocab/quantitykind/ElectromagneticEnergyDensity - https://www.wikidata.org/wiki/Q77989624 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-65 - 6-33 - Arithmetic average of (electric field strength multiplied by electric flux density) and (magnetic field strength multiplied by magnetic flux density) - - - - - - HandlingDevice - HandlingDevice - - - - - AnalogicalIcon - An icon that focus on HOW the object works. - An icon that represents the internal logical structure of the object. - AnalogicalIcon - An icon that represents the internal logical structure of the object. - A physics equation is replicating the mechanisms internal to the object. - Electrical diagram is diagrammatic and resemblance - MODA and CHADA are diagrammatic representation of a simulation or a characterisation workflow. - An icon that focus on HOW the object works. - The subclass of icon inspired by Peirceian category (b) the diagram, whose internal relations, mainly dyadic or so taken, represent by analogy (with the same logic) the relations in something (e.g. math formula, geometric flowchart). - - - - - - - Service - IntangibleProduct - Service - https://www.iso.org/obp/ui/#iso:std:iso:9000:ed-4:v1:en:term:3.7.7 + + FundamentalReciprocalLatticeVector + Fundamental translation vectors for the reciprocal lattice. + FundamentalReciprocalLatticeVector + https://qudt.org/vocab/quantitykind/FundamentalReciprocalLatticeVector + https://www.wikidata.org/wiki/Q105475399 + 12-2.2 + Fundamental translation vectors for the reciprocal lattice. - - - ElectronAntiNeutrino - ElectronAntiNeutrino + + + + + + + + + + + AreaDensity + Mass per unit area. + AreaDensity + http://qudt.org/vocab/quantitykind/SurfaceDensity + https://doi.org/10.1351/goldbook.S06167 - - - HybridMatter - Matter composed of both matter and antimatter fundamental particles. - HybridMatter - Matter composed of both matter and antimatter fundamental particles. + + + + HPPC + + electrochemical method that measures the voltage drop of a cell resulting from a square wave current load + HybridPulsePowerCharacterisation + HybridPulsePowerCharacterization + HPPC + electrochemical method that measures the voltage drop of a cell resulting from a square wave current load - - - - Molds - Molds + + + + CreepTesting + The creep test is a destructive materials testing method for determination of the long-term strength and heat resistance of a material. When running a creep test, the specimen is subjected to increased temperature conditions for an extended period of time and loaded with a constant tensile force or tensile stress. + CreepTesting + The creep test is a destructive materials testing method for determination of the long-term strength and heat resistance of a material. When running a creep test, the specimen is subjected to increased temperature conditions for an extended period of time and loaded with a constant tensile force or tensile stress. - + - - - - - T-1 L-2 M0 I0 Θ0 N+1 J0 - - - AmountPerAreaTimeUnit - AmountPerAreaTimeUnit + + + Activity + Number dN of spontaneous nuclear transitions or nuclear disintegrations for a radionuclide of amount N produced during a short time interval dt, divided by this time interval. + Activity + https://qudt.org/vocab/quantitykind/Activity + https://www.wikidata.org/wiki/Q317949 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-05 + 10-27 + Number dN of spontaneous nuclear transitions or nuclear disintegrations for a radionuclide of amount N produced during a short time interval dt, divided by this time interval. + https://goldbook.iupac.org/terms/view/A00114 - - - - + + + - - T-1 L+3 M0 I0 Θ0 N0 J0 + + - - VolumePerTimeUnit - VolumePerTimeUnit - - - - - AmorphousMaterial - NonCrystallineMaterial - AmorphousMaterial + + + + File + In computing, a computer file is a resource for recording data on a computer storage device, primarily identified by its file path. + File + In computing, a computer file is a resource for recording data on a computer storage device, primarily identified by its file path. - - + + - - + + - - - KnownConstant - A variable that stand for a well known numerical constant (a known number). - KnownConstant - A variable that stand for a well known numerical constant (a known number). - π refers to the constant number ~3.14 + + SystemResource + Any physical or virtual component of limited availability within a computer system. + Resource + SystemResource + Any physical or virtual component of limited availability within a computer system. - - - - ApplicationSpecificScript - A scripting language developed specifically for an application, so that it's usage and interpretation is limited in this context. - ApplicationSpecificScript - A scripting language developed specifically for an application, so that it's usage and interpretation is limited in this context. - Scripting file for the execution of modelling software such as LAMMPS, OpenFOAM, or for general purpose platforms such as MATLAB or Mathematica. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + AntiQuark + AntiQuark - - - - - ShortRangeOrderParameter - fraction of nearest-neighbour atom pairs in an Ising ferromagnet having magnetic moments in one direction, minus the fraction having magnetic moments in the opposite direction - ShortRangeOrderParameter - https://qudt.org/vocab/quantitykind/Short-RangeOrderParameter - https://www.wikidata.org/wiki/Q105495979 - 12-5.1 - fraction of nearest-neighbour atom pairs in an Ising ferromagnet having magnetic moments in one direction, minus the fraction having magnetic moments in the opposite direction + + + + + + + + + + + + + + CalibrationTask + Used to break-down a CalibrationProcess into his specific tasks. + CalibrationTask + Used to break-down a CalibrationProcess into his specific tasks. - + - - - - RollingResistance - Force resisting the motion when a body (such as a ball, tire, or wheel) rolls on a surface. - RollingDrag - RollingFrictionForce - RollingResistance - https://www.wikidata.org/wiki/Q914921 - 4-9.5 - Force resisting the motion when a body (such as a ball, tire, or wheel) rolls on a surface. + + + + + T-1 L+2 M0 I0 Θ0 N0 J0 + + + AreicSpeedUnit + AreicSpeedUnit - + - - DrawForming - Draw forming by drawing a workpiece through a tool opening that is narrowed in the drawing direction. - DrawForming - - - - - - - DisplacementVector - In condensed matter physics, position vector of an atom or ion relative to its equilibrium position. - DisplacementVector - https://qudt.org/vocab/quantitykind/DisplacementVectorOfIon - https://www.wikidata.org/wiki/Q105533558 - 12-7.3 - In condensed matter physics, position vector of an atom or ion relative to its equilibrium position. + + Factory + A building or group of buildings where goods are manufactured or assembled. + IndustrialPlant + Factory + A building or group of buildings where goods are manufactured or assembled. - + - + + - - - - - - - Capacitance - The derivative of the electric charge of a system with respect to the electric potential. - ElectricCapacitance - Capacitance - http://qudt.org/vocab/quantitykind/Capacitance - 6-13 - The derivative of the electric charge of a system with respect to the electric potential. - https://doi.org/10.1351/goldbook.C00791 + + T+3 L0 M-1 I0 Θ+1 N0 J0 + + + PerThermalTransmittanceUnit + PerThermalTransmittanceUnit - + + + + SourceVoltage + Voltage between the two terminals of a voltage source when there is no electric current through the source. + SourceTension + SourceVoltage + https://qudt.org/vocab/quantitykind/SourceVoltage + https://www.wikidata.org/wiki/Q185329 + 6-36 + Voltage between the two terminals of a voltage source when there is no electric current through the source. + + + - + - - - - - - - + + - DownQuark - DownQuark - https://en.wikipedia.org/wiki/Down_quark + PhysicallyInteracting + A causally bonded system is a system in which there are at least thwo causal paths that are interacting. + PhysicallyInteracting + A causally bonded system is a system in which there are at least thwo causal paths that are interacting. - - - - HardnessTesting - - A test to determine the resistance a material exhibits to permanent deformation by penetration of another harder material. - HardnessTesting - A test to determine the resistance a material exhibits to permanent deformation by penetration of another harder material. + + + + PhaseVelocity + For a sinusoidal wave at a given point, velocity in the direction of propagation of the wavefront corresponding to a specified phase. + PhaseSpeed + PhaseVelocity + https://www.wikidata.org/wiki/Q13824 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-10-13 + https://dbpedia.org/page/Phase_velocity + 3-23.1 + For a sinusoidal wave at a given point, velocity in the direction of propagation of the wavefront corresponding to a specified phase. + https://en.wikipedia.org/wiki/Phase_velocity - - - - - LinearAttenuationCoefficient - In nuclear physics, fraction of interacting particles per distance traversed in a given material. - LinearAttenuationCoefficient - https://www.wikidata.org/wiki/Q98583077 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-04-31 - 10-49 - In nuclear physics, fraction of interacting particles per distance traversed in a given material. + + + + MassFractionUnit + Unit for quantities of dimension one that are the fraction of two masses. + MassFractionUnit + Unit for quantities of dimension one that are the fraction of two masses. + Unit for mass fraction. - + + + + AssemblyLine + A manufacturing process in which interchangeable parts are added to a product in a sequential manner to create an end product. + Is not collection, since the connection between the elements of an assembly line occurs through the flow of objects that are processed. + AssemblyLine + A manufacturing process in which interchangeable parts are added to a product in a sequential manner to create an end product. + + + - - - QualityFactor - Dimensionless quantity in electromagnetism. - QualityFactor - https://qudt.org/vocab/quantitykind/QualityFactor - https://www.wikidata.org/wiki/Q79467569 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=151-15-45 - 6-53 - Dimensionless quantity in electromagnetism. + + + ElectronRadius + Radius of a sphere such that the relativistic electron energy is distributed uniformly. + ElectronRadius + https://www.wikidata.org/wiki/Q2152581 + 10-19.2 + Radius of a sphere such that the relativistic electron energy is distributed uniformly. - - - - SpecificationLanguage - A language used to describe what a computer system should do. - SpecificationLanguage - A language used to describe what a computer system should do. - ACSL, VDM, LOTUS, MML, ... - https://en.wikipedia.org/wiki/Specification_language + + + + DisplacementCurrent + Scalar quantity equal to the flux of the displacement current density JD through a given directed surface S. + DisplacementCurrent + https://qudt.org/vocab/quantitykind/DisplacementCurrent + https://www.wikidata.org/wiki/Q853178 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-43 + 6-19.1 + Scalar quantity equal to the flux of the displacement current density JD through a given directed surface S. - + - T-3 L+2 M+1 I0 Θ0 N0 J0 + T0 L-3 M0 I+1 Θ0 N-1 J0 - PowerUnit - PowerUnit - - - - - GreenUpQuark - GreenUpQuark + ElectricCurrentPerAmountVolumeUnit + ElectricCurrentPerAmountVolumeUnit - + - T+3 L-2 M-1 I0 Θ+1 N0 J0 + T+1 L+1 M-1 I0 Θ0 N0 J0 - ThermalResistanceUnit - ThermalResistanceUnit - - - - - - UnitOne - "The unit one is the neutral element of any system of units – necessary and present automatically." - --- SI Brochure - Represents the number 1, used as an explicit unit to say something has no units. - Unitless - UnitOne - http://qudt.org/vocab/unit/UNITLESS - Represents the number 1, used as an explicit unit to say something has no units. - "The unit one is the neutral element of any system of units – necessary and present automatically." - --- SI Brochure - Refractive index or volume fraction. - Typically used for ratios of two units whos dimensions cancels out. - - - - - - DippingForms - DippingForms - - - - - - FromWorkPIecetoWorkPiece - FromWorkPIecetoWorkPiece + LengthTimePerMassUnit + LengthTimePerMassUnit - - - - - RestEnergy - E_0 = m_0 * c_0^2 - -where m_0 is the rest mass of that particle and c_0 is the speed of light in a vacuum. - Product of the rest mass and the square of the speed of light in vacuum. - RestEnergy - https://www.wikidata.org/wiki/Q11663629 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-05 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-04-17 - 10-3 - Product of the rest mass and the square of the speed of light in vacuum. - E_0 = m_0 * c_0^2 - -where m_0 is the rest mass of that particle and c_0 is the speed of light in a vacuum. - https://en.wikipedia.org/wiki/Invariant_mass#Rest_energy + + + + + + + + + + + + + + + + + + + TopQuark + TopQuark + https://en.wikipedia.org/wiki/Top_quark - - - - SurfaceDensityOfElectricCharge - The derivative of the electric charge of a system with respect to the area. - AreicElectricCharge - SurfaceChargeDensity - SurfaceDensityOfElectricCharge - https://www.wikidata.org/wiki/Q12799324 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-08 - 6-4 - The derivative of the electric charge of a system with respect to the area. - https://doi.org/10.1351/goldbook.S06159 + + + BlueStrangeQuark + BlueStrangeQuark - - - + + + + - - / - - - - Division - Division + + T+3 L-2 M-1 I+2 Θ0 N0 J0 + + + ElectricConductanceUnit + ElectricConductanceUnit - - - - DataExchangeLanguage - A computer language that is domain-independent and can be used for expressing data from any kind of discipline. - DataExchangeLanguage - A computer language that is domain-independent and can be used for expressing data from any kind of discipline. - JSON, YAML, XML - https://en.wikipedia.org/wiki/Data_exchange#Data_exchange_languages + + + + + AngularWavenumber + Magnitude of the wave vector. + AngularRepetency + AngularWavenumber + https://qudt.org/vocab/quantitykind/AngularWavenumber + https://www.wikidata.org/wiki/Q30338487 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-10-12 + 3-22 + Magnitude of the wave vector. - - - - DropForging - DropForging + + + DataSet + Encoded data made of more than one datum. + DataSet + Encoded data made of more than one datum. - - + + - T-1 L0 M0 I0 Θ-1 N0 J0 + T+3 L-1 M-1 I0 Θ0 N0 J+1 - PerTemperatureTimeUnit - PerTemperatureTimeUnit + LuminousEfficacyUnit + LuminousEfficacyUnit - - - - - - - - - - - Nucleus - The small, dense region at the centre of an atom consisting of protons and neutrons. - Nucleus - The small, dense region at the centre of an atom consisting of protons and neutrons. + + + + MutualInductance + Given an electric current in a thin conducting loop and the linked flux caused by that electric current in another loop, the mutual inductance of the two loops is the linked flux divided by the electric current. + MutualInductance + https://www.wikidata.org/wiki/Q78101401 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-36 + 6-41.2 + Given an electric current in a thin conducting loop and the linked flux caused by that electric current in another loop, the mutual inductance of the two loops is the linked flux divided by the electric current. + https://doi.org/10.1351/goldbook.M04076 - + - + - - - ThermalConductivity - At a point fixed in a medium with a temperature field, scalar quantity λ characterizing the ability of the medium to transmit heat through a surface element containing that point: φ = −λ grad T, where φ is the density of heat flow rate and T is thermodynamic temperature. - In an anisotropic medium, thermal conductivity is a tensor quantity. - ThermalConductivity - https://qudt.org/vocab/quantitykind/ThermalConductivity - https://www.wikidata.org/wiki/Q487005 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-38 - https://dbpedia.org/page/Thermal_conductivity - 5-9 - At a point fixed in a medium with a temperature field, scalar quantity λ characterizing the ability of the medium to transmit heat through a surface element containing that point: φ = −λ grad T, where φ is the density of heat flow rate and T is thermodynamic temperature. + + ElectricInductance + A property of an electrical conductor by which a change in current through it induces an electromotive force in both the conductor itself and in any nearby conductors by mutual inductance. + Inductance + ElectricInductance + http://qudt.org/vocab/quantitykind/Inductance + https://www.wikidata.org/wiki/Q177897 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-19 + 6-41.1 + A property of an electrical conductor by which a change in current through it induces an electromotive force in both the conductor itself and in any nearby conductors by mutual inductance. + https://doi.org/10.1351/goldbook.M04076 - + - - - - - T-1 L+4 M0 I0 Θ0 N0 J0 - - - QuarticLengthPerTimeUnit - QuarticLengthPerTimeUnit + + EffectiveDiffusionCoefficient + Diffusion coefficient through the pore space of a porous media. + EffectiveDiffusionCoefficient + https://www.wikidata.org/wiki/Q258852 + Diffusion coefficient through the pore space of a porous media. - + + + + EffectiveMass + The mass that it seems to have when responding to forces, or the mass that it seems to have when interacting with other identical particles in a thermal distribution. + EffectiveMass + https://qudt.org/vocab/quantitykind/EffectiveMass + https://www.wikidata.org/wiki/Q1064434 + 12-30 + The mass that it seems to have when responding to forces, or the mass that it seems to have when interacting with other identical particles in a thermal distribution. + + + + - T0 L0 M0 I+1 Θ-1 N0 J0 + T-1 L0 M+1 I-1 Θ0 N0 J0 - ElectricCurrentPerTemperatureUnit - ElectricCurrentPerTemperatureUnit - - - - - BaseQuantity - "Quantity in a conventionally chosen subset of a given system of quantities, where no quantity in the subset can be expressed in terms of the other quantities within that subset" -ISO 80000-1 - BaseQuantity - "Quantity in a conventionally chosen subset of a given system of quantities, where no quantity in the subset can be expressed in terms of the other quantities within that subset" -ISO 80000-1 - base quantity + MassPerElectricChargeUnit + MassPerElectricChargeUnit - + - - - - - - - - - - Volume - Extent of an object in space. - Volume - http://qudt.org/vocab/quantitykind/Volume - https://www.wikidata.org/wiki/Q39297 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=102-04-40 - https://dbpedia.org/page/Volume - 3-4 + + Tortuosity + Parameter for diffusion and fluid flow in porous media. + Tortuosity + https://www.wikidata.org/wiki/Q2301683 + Parameter for diffusion and fluid flow in porous media. - + - - Profilometry + + SampledDCPolarography - Profilometry is a technique used to extract topographical data from a surface. This can be a single point, a line scan or even a full three dimensional scan. The purpose of profilometry is to get surface morphology, step heights and surface roughness. - Profilometry - Profilometry is a technique used to extract topographical data from a surface. This can be a single point, a line scan or even a full three dimensional scan. The purpose of profilometry is to get surface morphology, step heights and surface roughness. - - - - - - - - - - - - - - - - PhysicallyInteracting - A causally bonded system is a system in which there are at least thwo causal paths that are interacting. - PhysicallyInteracting - A causally bonded system is a system in which there are at least thwo causal paths that are interacting. + DC polarography with current sampling at the end of each drop life mechanically enforced by a knocker at a preset drop time value. The current sampling and mechanical drop dislodge are synchronized. + In this way, the ratio of faradaic current to double layer charging current is enhanced and the negative influence of charging current is partially eliminated. Due to the improved signal (faradaic current) to noise (charging current) ratio, the limit of detection is lowered. + TASTPolarography + SampledDCPolarography + DC polarography with current sampling at the end of each drop life mechanically enforced by a knocker at a preset drop time value. The current sampling and mechanical drop dislodge are synchronized. + https://doi.org/10.1515/pac-2018-0109 @@ -21207,17 +20615,30 @@ ISO 80000-1 ElectricChargePerTemperatureUnit - + + + + + + + T+2 L-1 M-1 I+1 Θ0 N0 J0 + + + MagneticReluctivityUnit + MagneticReluctivityUnit + + + - + - + - + @@ -21225,174 +20646,175 @@ ISO 80000-1 - AntiElectronType - AntiElectronType + CharmAntiQuark + CharmAntiQuark + + + + + + Irradiate + Irradiate + + + + + + + DonorDensity + Number of donor levels per volume. + DonorDensity + https://qudt.org/vocab/quantitykind/DonorDensity + https://www.wikidata.org/wiki/Q105979886 + 12-29.4 + Number of donor levels per volume. + + + + + GluonType5 + GluonType5 - + - - DataNormalisation + + NeutronSpinEchoSpectroscopy - Data normalization involves adjusting raw data to a notionally common scale. - It involves the creation of shifted and/or scaled versions of the values to allow post-processing in a way that eliminates the effects of influences on subsequent properties extraction. - DataNormalisation - Data normalization involves adjusting raw data to a notionally common scale. - It involves the creation of shifted and/or scaled versions of the values to allow post-processing in a way that eliminates the effects of influences on subsequent properties extraction. + Neutron spin echo spectroscopy is a high resolution inelastic neutron scattering method probing nanosecond dynamics. Neutron spin echo (NSE) spectroscopy uses the precession of neutron spins in a magnetic field to measure the energy transfer at the sample and decouples the energy resolution from beam characteristics like monochromatisation and collimation. + NSE + NeutronSpinEchoSpectroscopy + Neutron spin echo spectroscopy is a high resolution inelastic neutron scattering method probing nanosecond dynamics. Neutron spin echo (NSE) spectroscopy uses the precession of neutron spins in a magnetic field to measure the energy transfer at the sample and decouples the energy resolution from beam characteristics like monochromatisation and collimation. - - - - FiberReinforcePlasticManufacturing - FiberReinforcePlasticManufacturing + + + + Heat + Heat is energy in transfer to or from a thermodynamic system, by mechanisms other than thermodynamic work or transfer of matter. + AmountOfHeat + Heat + http://qudt.org/vocab/quantitykind/Heat + 5-6.1 + https://doi.org/10.1351/goldbook.H02752 - + - VectorMeson - A meson with total spin 1 and odd parit. - VectorMeson - A meson with total spin 1 and odd parit. - https://en.wikipedia.org/wiki/Vector_meson + + Spray + A suspension of liquid droplets dispersed in a gas through an atomization process. + Spray + A suspension of liquid droplets dispersed in a gas through an atomization process. - - - - - NeutronYieldPerAbsorption - Average number of fission neutrons, both prompt and delayed, emitted per neutron absorbed in a fissionable nuclide or in a nuclear fuel, as specified. - NeutronYieldPerAbsorption - https://qudt.org/vocab/quantitykind/NeutronYieldPerAbsorption - https://www.wikidata.org/wiki/Q99159075 - 10-74.2 - Average number of fission neutrons, both prompt and delayed, emitted per neutron absorbed in a fissionable nuclide or in a nuclear fuel, as specified. + + + + Foaming + Foaming - - - + + + + - - + + T+1 L+1 M0 I+1 Θ0 N0 J0 - - - - MolarConductivity - Conductivity per molar concentration of electrolyte. - MolarConductivity - https://qudt.org/vocab/quantitykind/MolarConductivity - https://www.wikidata.org/wiki/Q1943278 - 9-45 - Conductivity per molar concentration of electrolyte. - https://doi.org/10.1351/goldbook.M03976 - - - - - - SandMolds - SandMolds + + ElectricDipoleMomentUnit + ElectricDipoleMomentUnit - + - T+2 L+2 M-1 I+2 Θ0 N0 J0 + T0 L0 M0 I0 Θ+1 N+1 J0 - EnergyPerSquareMagneticFluxDensityUnit - EnergyPerSquareMagneticFluxDensityUnit + AmountTemperatureUnit + AmountTemperatureUnit - + - + + - - + + T+3 L-1 M-1 I0 Θ+1 N0 J0 - - - - UnifiedAtomicMassConstant - 1/12 of the mass of an atom of the nuclide 12C in the ground state at rest. - UnifiedAtomicMassConstant - https://www.wikidata.org/wiki/Q4817337 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-05-23 - 10-4.3 - 1/12 of the mass of an atom of the nuclide 12C in the ground state at rest. - https://doi.org/10.1351/goldbook.A00497 + + ThermalResistivityUnit + ThermalResistivityUnit - - - - Calorimetry - In chemistry and thermodynamics, calorimetry (from Latin calor 'heat', and Greek μέτρον (metron) 'measure') is the science or act of measuring changes in state variables of a body for the purpose of deriving the heat transfer associated with changes of its state due, for example, to chemical reactions, physical changes, or phase transitions under specified constraints. Calorimetry is performed with a calorimeter. - Calorimetry - In chemistry and thermodynamics, calorimetry (from Latin calor 'heat', and Greek μέτρον (metron) 'measure') is the science or act of measuring changes in state variables of a body for the purpose of deriving the heat transfer associated with changes of its state due, for example, to chemical reactions, physical changes, or phase transitions under specified constraints. Calorimetry is performed with a calorimeter. + + + + + + + + + + + + + + + + + FirstGenerationFermion + FirstGenerationFermion - - - - LiquidLiquidSuspension - A coarse dispersion of liquid in a liquid continuum phase. - LiquidLiquidSuspension - A coarse dispersion of liquid in a liquid continuum phase. + + + + + CoherenceLength + Distance in a superconductor over which the effect of a perturbation is appreciable at zero thermodynamic temperature + CoherenceLength + https://www.wikidata.org/wiki/Q1778793 + 12-38.2 + Distance in a superconductor over which the effect of a perturbation is appreciable at zero thermodynamic temperature - - - - - - - T+3 L-2 M-1 I+1 Θ0 N0 J0 - - - ElectricCurrentPerUnitEnergyUnit - ElectricCurrentPerUnitEnergyUnit + + + + PaperManufacturing + PaperManufacturing - - - - + + + + + + + + + - + - + - + - - - - - - - - - - - - - - - - - + + @@ -21401,1295 +20823,1502 @@ ISO 80000-1 - ISQBaseQuantity - Base quantities defined in the International System of Quantities (ISQ). - ISQBaseQuantity - Base quantities defined in the International System of Quantities (ISQ). - https://en.wikipedia.org/wiki/International_System_of_Quantities - - - - - - - - - T0 L-2 M0 I+1 Θ-2 N0 J0 - - - RichardsonConstantUnit - RichardsonConstantUnit - - - - - - - PoissonNumber - Ratio of transverse strain to axial strain. - PoissonsRatio - PoissonNumber - https://www.wikidata.org/wiki/Q190453 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-61 - 4-18 - Ratio of transverse strain to axial strain. + MaterialsModel + A solvable set of one Physics Equation and one or more Materials Relations. + https://op.europa.eu/en/publication-detail/-/publication/ec1455c3-d7ca-11e6-ad7c-01aa75ed71a1 + MaterialsModel + A solvable set of one Physics Equation and one or more Materials Relations. - - - - - HartreeEnergy - Energy of the electron in a hydrogen atom in its ground state - HartreeEnergy - https://qudt.org/vocab/unit/E_h.html - https://www.wikidata.org/wiki/Q476572 - https://dbpedia.org/page/Hartree - 10-8 - Energy of the electron in a hydrogen atom in its ground state - https://en.wikipedia.org/wiki/Hartree - https://doi.org/10.1351/goldbook.H02748 + + + IonAtom + A standalone atom with an unbalanced number of electrons with respect to its atomic number. + The ion_atom is the basic part of a pure ionic bonded compound i.e. without eclectron sharing, + IonAtom + A standalone atom with an unbalanced number of electrons with respect to its atomic number. - + - + - - ExtentOfReaction - Difference between equilibrium and initial amount of a substance, divided by its stoichiometric number. - ExtentOfReaction - https://qudt.org/vocab/quantitykind/ExtentOfReaction - https://www.wikidata.org/wiki/Q899046 - 9-31 - Difference between equilibrium and initial amount of a substance, divided by its stoichiometric number. - https://doi.org/10.1351/goldbook.E02283 - - - - - - MutualInductance - Given an electric current in a thin conducting loop and the linked flux caused by that electric current in another loop, the mutual inductance of the two loops is the linked flux divided by the electric current. - MutualInductance - https://www.wikidata.org/wiki/Q78101401 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-36 - 6-41.2 - Given an electric current in a thin conducting loop and the linked flux caused by that electric current in another loop, the mutual inductance of the two loops is the linked flux divided by the electric current. - https://doi.org/10.1351/goldbook.M04076 - - - - - - - DiffusionCoefficientForFluenceRate - Proportionality constant between the particle current density J and the gradient of the particle fluence rate. - DiffusionCoefficientForFluenceRate - https://qudt.org/vocab/quantitykind/DiffusionCoefficientForFluenceRate - https://www.wikidata.org/wiki/Q98876254 - 10-65 - Proportionality constant between the particle current density J and the gradient of the particle fluence rate. + + ThermalDiffusivity + ThermalDiffusionCoefficient + ThermalDiffusivity + https://qudt.org/vocab/quantitykind/ThermalDiffusivity + https://www.wikidata.org/wiki/Q3381809 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-53 + 5-14 - + - - - ExchangeIntegral - constituent of the interaction energy between the spins of adjacent electrons in matter arising from the overlap of electron state functions - ExchangeIntegral - https://qudt.org/vocab/quantitykind/ExchangeIntegral - https://www.wikidata.org/wiki/Q10882959 - 12-34 - constituent of the interaction energy between the spins of adjacent electrons in matter arising from the overlap of electron state functions - - - - - - Chronocoulometry - - Chronocoulometry provides the same information that is provided by chronoamperometry, since it is based on the integration of the I-t curve. Nevertheless, chronocoulometry offers important experimental advantages, such as (i) the measured signal usually increases with time and hence the later parts of the transient can be detected more accurately, (ii) a better signal-to-noise ratio can be achieved, and (iii) other contributions to overall charge passed as a function of time can be discriminated from those due to the diffusion of electroactive substances. - direct coulometry at controlled potential in which the electric charge passed after the application of a potential step perturbation is measured as a function of time (Q-t curve) - Chronocoulometry - direct coulometry at controlled potential in which the electric charge passed after the application of a potential step perturbation is measured as a function of time (Q-t curve) - https://doi.org/10.1515/pac-2018-0109 - - - - - - - Bending - Forming of a solid body, whereby the plastic state is essentially brought about by a bending stress - Bending + + + + + T0 L-1 M+1 I0 Θ0 N0 J0 + + + MassPerLengthUnit + MassPerLengthUnit - + - T-2 L+1 M+1 I-1 Θ0 N0 J0 + T0 L0 M+1 I0 Θ0 N-1 J0 - MagneticPotentialUnit - MagneticPotentialUnit - - - - - BlueUpAntiQuark - BlueUpAntiQuark + MassPerAmountUnit + MassPerAmountUnit - + - T+10 L-2 M-3 I+4 Θ0 N0 J0 + T0 L-3 M0 I0 Θ0 N+1 J0 - QuarticElectricDipoleMomentPerCubicEnergyUnit - QuarticElectricDipoleMomentPerCubicEnergyUnit + AmountConcentrationUnit + AmountConcentrationUnit - + + + + + NucleonNumber + number of nucleons in an atomic nucleus + MassNumber + NucleonNumber + https://qudt.org/vocab/quantitykind/NucleonNumber + https://www.wikidata.org/wiki/Q101395 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-05-32 + https://dbpedia.org/page/Mass_number + 10-1.3 + number of nucleons in an atomic nucleus + https://en.wikipedia.org/wiki/Mass_number + https://doi.org/10.1351/goldbook.M03726 + + + + + + ConductanceForAlternatingCurrent + Real part of the admittance. + ConductanceForAlternatingCurrent + https://www.wikidata.org/wiki/Q79464628 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-53 + 6-52.2 + Real part of the admittance. + + + - + - - SurfaceMassDensity - at a given point on a two-dimensional domain of quasi-infinitesimal area dA, scalar quantity equal to the mass dm within the domain divided by the area dA, thus ρA = dm/dA. - AreicMass - SurfaceDensity - SurfaceMassDensity - https://www.wikidata.org/wiki/Q1907514 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-10 - 4-5 - at a given point on a two-dimensional domain of quasi-infinitesimal area dA, scalar quantity equal to the mass dm within the domain divided by the area dA, thus ρA = dm/dA. - https://doi.org/10.1351/goldbook.S06167 + + BohrMagneton + Magnitude of the magnetic moment of an electron in a state with orbital angular momentum quantum number l=1 due to its orbital motion. + BohrMagneton + https://www.wikidata.org/wiki/Q737120 + 10-9.2 + Magnitude of the magnetic moment of an electron in a state with orbital angular momentum quantum number l=1 due to its orbital motion. - + + + Graviton + The class of individuals that stand for gravitons elementary particles. + While this particle is only supposed to exist, the EMMO approach to classical and quantum systems represents fields as made of particles. + +For this reason graviton is an useful concept to homogenize the approach between different fields. + Graviton + The class of individuals that stand for gravitons elementary particles. + While this particle is only supposed to exist, the EMMO approach to classical and quantum systems represents fields as made of particles. + +For this reason graviton is an useful concept to homogenize the approach between different fields. + https://en.wikipedia.org/wiki/Graviton + + + + + + DefiningEquation + An equation that define a new variable in terms of other mathematical entities. + DefiningEquation + An equation that define a new variable in terms of other mathematical entities. + The definition of velocity as v = dx/dt. + +The definition of density as mass/volume. + +y = f(x) + + + + + + VolumeFractionUnit + Unit for quantities of dimension one that are the fraction of two volumes. + VolumeFractionUnit + Unit for quantities of dimension one that are the fraction of two volumes. + Unit for volume fraction. + + + + + + + RelativePermeability + Scalar quantity or tensor quantity equal to the absolute permeability divided by the magnetic constant. + RelativePermeability + https://qudt.org/vocab/quantitykind/ElectromagneticPermeabilityRatio + https://www.wikidata.org/wiki/Q77785645 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-12-29 + 6-27 + Scalar quantity or tensor quantity equal to the absolute permeability divided by the magnetic constant. + https://doi.org/10.1351/goldbook.R05272 + + + + + + + LiquidFoam + A foam of trapped gas in a liquid. + LiquidFoam + A foam of trapped gas in a liquid. + + + + + + Foam + A colloid formed by trapping pockets of gas in a liquid or solid. + Foam + A colloid formed by trapping pockets of gas in a liquid or solid. + + + - AtomicForceMicroscopy - Atomic force microscopy (AFM) is an influential surface analysis technique used for micro/nanostructured coatings. This flexible technique can be used to obtain high-resolution nanoscale images and study local sites in air (conventional AFM) or liquid (electrochemical AFM) surroundings. - AtomicForceMicroscopy - Atomic force microscopy (AFM) is an influential surface analysis technique used for micro/nanostructured coatings. This flexible technique can be used to obtain high-resolution nanoscale images and study local sites in air (conventional AFM) or liquid (electrochemical AFM) surroundings. + FieldEmissionScanningElectronMicroscopy + + Field emission scanning electron microscopy (FE-SEM) is an advanced technology used to capture the microstructure image of the materials. FE-SEM is typically performed in a high vacuum because gas molecules tend to disturb the electron beam and the emitted secondary and backscattered electrons used for imaging. + FE-SEM + FieldEmissionScanningElectronMicroscopy + Field emission scanning electron microscopy (FE-SEM) is an advanced technology used to capture the microstructure image of the materials. FE-SEM is typically performed in a high vacuum because gas molecules tend to disturb the electron beam and the emitted secondary and backscattered electrons used for imaging. - + - T-4 L+2 M+1 I-1 Θ0 N0 J0 + T0 L+3 M0 I0 Θ-1 N0 J0 - ElectricPotentialPerTimeUnit - ElectricPotentialPerTimeUnit + VolumePerTemperatureUnit + VolumePerTemperatureUnit - + - + + - - + + T0 L+6 M0 I0 Θ0 N0 J0 - - - LuminousIntensity - A measure of the wavelength-weighted power emitted by a light source in a particular direction per unit solid angle. It is based on the luminosity function, which is a standardized model of the sensitivity of the human eye. - LuminousIntensity - http://qudt.org/vocab/quantitykind/LuminousIntensity - 7-14 - A measure of the wavelength-weighted power emitted by a light source in a particular direction per unit solid angle. It is based on the luminosity function, which is a standardized model of the sensitivity of the human eye. + + SexticLengthUnit + SexticLengthUnit - + - - ActivePower - Average power over a period. - ActivePower - https://qudt.org/vocab/quantitykind/ActivePower - https://www.wikidata.org/wiki/Q20820042 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-11-42 - 6-56 - Average power over a period. + + + RelativeMassFractionOfVapour + RelativeMassFractionOfVapour + 5-35 - - - - Planing - Type of scratching behaviour where the scratching force and the (displacement) deflection of the scratching tip are constant over the scratching distance during the test. - Hobeln - Planing + + + + CommandLanguage + An interpreted computer language for job control in computing. + CommandLanguage + An interpreted computer language for job control in computing. + Unix shell. +Batch programming languages. + https://en.wikipedia.org/wiki/Command_language - + + + + + LongRangeOrderParameter + Fraction of atoms in an Ising ferromagnet having magnetic moments in one direction, minus the fraction having magnetic moments in the opposite direction. + LongRangeOrderParameter + https://qudt.org/vocab/quantitykind/Long-RangeOrderParameter + https://www.wikidata.org/wiki/Q105496124 + 12-5.2 + Fraction of atoms in an Ising ferromagnet having magnetic moments in one direction, minus the fraction having magnetic moments in the opposite direction. + + + + + + + FastFissionFactor + In an infinite medium, the ratio of the mean number of neutrons produced by fission due to neutrons of all energies to the mean number of neutrons produced by fissions due to thermal neutrons only. + FastFissionFactor + https://qudt.org/vocab/quantitykind/FastFissionFactor + https://www.wikidata.org/wiki/Q99197493 + 10-75 + In an infinite medium, the ratio of the mean number of neutrons produced by fission due to neutrons of all energies to the mean number of neutrons produced by fissions due to thermal neutrons only. + + + - + - - MagneticVectorPotential - Vector potential of the magnetic flux density. - MagneticVectorPotential - https://qudt.org/vocab/quantitykind/MagneticVectorPotential - https://www.wikidata.org/wiki/Q2299100 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-23 - 6-32 - Vector potential of the magnetic flux density. - - - - - - - - - T+1 L0 M0 I0 Θ0 N0 J0 - - - TimeUnit - TimeUnit + + MolarVolume + Volume per amount of substance. + MolarVolume + https://qudt.org/vocab/quantitykind/MolarVolume + https://www.wikidata.org/wiki/Q487112 + 9-5 + Volume per amount of substance. - - - - SpinQuantumNumber - Characteristic quantum number s of a particle, related to its spin. - SpinQuantumNumber - https://qudt.org/vocab/quantitykind/SpinQuantumNumber - https://www.wikidata.org/wiki/Q3879445 - 10-13.5 - Characteristic quantum number s of a particle, related to its spin. + + + + FlameCutting + FlameCutting - + - - + - - T0 L0 M+1 I0 Θ+1 N0 J0 + + - - MassTemperatureUnit - MassTemperatureUnit + + + PoyntingVector + Electric field strength multiplied by magnetic field strength. + PoyntingVector + https://qudt.org/vocab/quantitykind/PoyntingVector + https://www.wikidata.org/wiki/Q504186 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-66 + 6-34 + Electric field strength multiplied by magnetic field strength. - + - - DrawForms - DrawForms + + DieCasting + DieCasting - + - BlueDownQuark - BlueDownQuark + BlueUpQuark + BlueUpQuark - - - - Cementing - Cementing + + + + Dilatometry + Dilatometry is a method for characterising the dimensional changes of materials with variation of temperature conditions. + https://www.lboro.ac.uk/research/lmcc/facilities/dilatometry/#:~:text=Dilatometry%20is%20a%20method%20for,to%20mimic%20an%20industrial%20process. + Dilatometry + Dilatometry is a method for characterising the dimensional changes of materials with variation of temperature conditions. - + - - ArchetypeJoin - Archetype join attaches two workpiece with geometrically defined shape together, using supplementary workpiece made of amorphous material (e.g. powder). - ArchetypeJoin - Archetype join attaches two workpiece with geometrically defined shape together, using supplementary workpiece made of amorphous material (e.g. powder). - - - - - - - MassRatioOfWaterToDryMatter - The mass concentration of water at saturation is denoted usat. - Ratio of the mass of water to the mass of dry matter in a given volume of matter. - MassRatioOfWaterToDryMatter - https://www.wikidata.org/wiki/Q76378860 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-61 - 5-29 - Ratio of the mass of water to the mass of dry matter in a given volume of matter. - - - - - - - - - - - - - ThermalConductance - Reciprocal of the thermal resistance. - ThermalConductance - https://qudt.org/vocab/quantitykind/ThermalConductance - https://www.wikidata.org/wiki/Q17176562 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-46 - 5-13 - Reciprocal of the thermal resistance. - https://doi.org/10.1351/goldbook.T06298 + + Peening + (according to DIN 8200) Shot peening to generate residual compressive stresses in layers of the blasting material close to the surface in order to improve certain component properties, e.g. fatigue strength, corrosion resistance, wear resistance (from: DIN 8200:1982) + ShotPeening + Verfestigungsstrahlen + Peening + (according to DIN 8200) Shot peening to generate residual compressive stresses in layers of the blasting material close to the surface in order to improve certain component properties, e.g. fatigue strength, corrosion resistance, wear resistance (from: DIN 8200:1982) - + - - - DebyeTemperature - DebyeTemperature - https://qudt.org/vocab/quantitykind/DebyeTemperature - https://www.wikidata.org/wiki/Q3517821 - 12-11 + + + MolarHelmholtzEnergy + Helmholtz energy per amount of substance. + MolarHelmholtzEnergy + https://www.wikidata.org/wiki/Q88862986 + 9-6.3 + Helmholtz energy per amount of substance. - - + + + NonNumericalData + Data that are non-quantitatively interpreted (e.g., qualitative data, types). + NonNumericalData + Data that are non-quantitatively interpreted (e.g., qualitative data, types). + + + + - - + + - - - - - - - + + + - Meson - Hadronic subatomic particles composed of an equal number of quarks and antiquarks bound together by strong interactions. - Most mesons are composed of one quark and one antiquark. - Meson - Hadronic subatomic particles composed of an equal number of quarks and antiquarks bound together by strong interactions. - Most mesons are composed of one quark and one antiquark. - https://en.wikipedia.org/wiki/Meson - + Semiosis + A 'Process', that has participant an 'Interpreter', that is aimed to produce a 'Sign' representing another participant, the 'Object'. + Semiosis + A 'Process', that has participant an 'Interpreter', that is aimed to produce a 'Sign' representing another participant, the 'Object'. + Me looking a cat and saying loud: "Cat!" -> the semiosis process - - - - Riveting - Riveting +me -> interpreter +cat -> object (in Peirce semiotics) +the cat perceived by my mind -> interpretant +"Cat!" -> sign, the produced sign - + - - - - - T-3 L0 M+1 I0 Θ-4 N0 J0 - - - MassPerCubicTimeQuarticTemperatureUnit - MassPerCubicTimeQuarticTemperatureUnit + + + MagneticSusceptibility + Scalar or tensor quantity the product of which by the magnetic constant μ0 and by the magnetic field strength H is equal to the magnetic polarization J. + MagneticSusceptibility + https://qudt.org/vocab/unit/SUSCEPTIBILITY_MAG.html + https://www.wikidata.org/wiki/Q691463 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-12-37 + 6-28 + Scalar or tensor quantity the product of which by the magnetic constant μ0 and by the magnetic field strength H is equal to the magnetic polarization J. - - - - - - - T+1 L+1 M0 I+1 Θ0 N0 J0 - - - ElectricDipoleMomentUnit - ElectricDipoleMomentUnit + + + + + EnergyImparted + Sum of energies deposited by ionizing radiation in a given volume. + EnergyImparted + https://qudt.org/vocab/quantitykind/EnergyImparted + https://www.wikidata.org/wiki/Q99526944 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-34 + 10-80.1 + Sum of energies deposited by ionizing radiation in a given volume. - - - - RadiantFlux - The radiant energy emitted, reflected, transmitted or received, per unit time. - RadiantFlux - http://qudt.org/vocab/quantitykind/RadiantFlux - https://doi.org/10.1351/goldbook.R05046 + + + + + Gel + A soft, solid or solid-like colloid consisting of two or more components, one of which is a liquid, present in substantial quantity. + Gel + A soft, solid or solid-like colloid consisting of two or more components, one of which is a liquid, present in substantial quantity. - - - - - MaterialSynthesis - Deals with undefined shapes both input and output. - The creation of a material entity starting from fundamental substances, involving chemical phenomena (e.g. reaction, bonding). - MaterialSynthesis - The creation of a material entity starting from fundamental substances, involving chemical phenomena (e.g. reaction, bonding). - Deals with undefined shapes both input and output. + + + + + IntrinsicCarrierDensity + Square root of the product of electron and hole density in a semiconductor. + IntrinsicCarrierDensity + https://qudt.org/vocab/quantitykind/IntinsicCarrierDensity + https://www.wikidata.org/wiki/Q1303188 + 12-29.3 + Square root of the product of electron and hole density in a semiconductor. - - - - ProductionEngineering - ProductionEngineering + + + ScalarMeson + A meson with spin zero and even parity. + ScalarMeson + A meson with spin zero and even parity. + https://en.wikipedia.org/wiki/Scalar_meson - - + + - T-1 L+1 M+1 I0 Θ0 N0 J0 + T-2 L-2 M+1 I0 Θ0 N0 J0 - MomentumUnit - MomentumUnit + MassPerSquareLengthSquareTimeUnit + MassPerSquareLengthSquareTimeUnit - + - - - - - - - - Illuminance - The total luminous flux incident on a surface, per unit area. - Illuminance - http://qudt.org/vocab/quantitykind/Illuminance - The total luminous flux incident on a surface, per unit area. - https://doi.org/10.1351/goldbook.I02941 + + OrbitalAngularMomentumQuantumNumber + Atomic quantum number related to the orbital angular momentum l of a one-electron state. + OrbitalAngularMomentumQuantumNumber + https://qudt.org/vocab/quantitykind/OrbitalAngularMomentumQuantumNumber + https://www.wikidata.org/wiki/Q1916324 + 10-13.3 + Atomic quantum number related to the orbital angular momentum l of a one-electron state. - + + + + TotalAngularMomentumQuantumNumber + Quantum number in an atom describing the magnitude of total angular momentum J. + TotalAngularMomentumQuantumNumber + https://qudt.org/vocab/quantitykind/TotalAngularMomentumQuantumNumber + https://www.wikidata.org/wiki/Q1141095 + 10-13.6 + Quantum number in an atom describing the magnitude of total angular momentum J. + + + - T-3 L+3 M+1 I-2 Θ0 N0 J0 + T+1 L0 M0 I+1 Θ0 N0 J0 - ElectricResistivityUnit - ElectricResistivityUnit + ElectricChargeUnit + ElectricChargeUnit - + + + + + IsentropicExponent + For an ideal gas, isentropic exponent is equal to ratio of the specific heat capacities. + IsentropicExponent + https://qudt.org/vocab/quantitykind/IsentropicExponent + https://www.wikidata.org/wiki/Q75775739 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-52 + 5-17.2 + + + + + + IonChromatography + + Ion chromatography (or ion-exchange chromatography) is a form of chromatography that separates ions and ionizable polar molecules based on their affinity to the ion exchanger. + IonChromatography + Ion chromatography (or ion-exchange chromatography) is a form of chromatography that separates ions and ionizable polar molecules based on their affinity to the ion exchanger. + https://en.wikipedia.org/wiki/Ion_chromatography + + + + + + SolidLiquidSuspension + A coarse dispersion of liquid in a solid continuum phase. + SolidLiquidSuspension + A coarse dispersion of liquid in a solid continuum phase. + + + + + + FreeForming + Free forming is pressure forming with tools that do not or only partially contain the shape of the workpiece and move against each other. + Non la metterei + Printing forms with tools that do not or only partially contain the shape of the workpiece and move against each other. The workpiece shape is created by free or fixed relative movement between the tool and the workpiece (kinematic shape generation). + FreeForming + + + - T-2 L-2 M0 I0 Θ0 N0 J0 + T-3 L+1 M+1 I0 Θ-1 N0 J0 - FrequencyPerAreaTimeUnit - FrequencyPerAreaTimeUnit + ThermalConductivityUnit + ThermalConductivityUnit + + + + + + PlasticSintering + PlasticSintering - + - + - - CatalyticActivity - Increase in the rate of reaction of a specified chemical reaction that an enzyme produces in a specific assay system. - CatalyticActivity - http://qudt.org/vocab/quantitykind/CatalyticActivity - Increase in the rate of reaction of a specified chemical reaction that an enzyme produces in a specific assay system. - https://doi.org/10.1351/goldbook.C00881 + + EnergyFluenceRate + In nuclear physics, time derivative of the energy fluence. + EnergyFluenceRate + https://qudt.org/vocab/quantitykind/EnergyFluenceRate + https://www.wikidata.org/wiki/Q98538655 + 10-47 + In nuclear physics, time derivative of the energy fluence. - + + + + MicrowaveSintering + MicrowaveSintering + + + - - - - - T-1 L+2 M-1 I0 Θ+1 N0 J0 - - - TemperatureAreaPerMassTimeUnit - TemperatureAreaPerMassTimeUnit + + + StoichiometricNumberOfSubstance + StoichiometricNumberOfSubstance + https://qudt.org/vocab/quantitykind/StoichiometricNumber + https://www.wikidata.org/wiki/Q95443720 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-01-22 + 9-29 + https://doi.org/10.1351/goldbook.S06025 - - + + + GluonType7 + GluonType7 + + + + + + ChipboardManufacturing + ChipboardManufacturing + + + + - - - - - - + + - - CalibrationTask - Used to break-down a CalibrationProcess into his specific tasks. - CalibrationTask - Used to break-down a CalibrationProcess into his specific tasks. + + + MassChangeRate + Mass increment per time. + MassChangeRate + https://www.wikidata.org/wiki/Q92020547 + 4-30.3 + Mass increment per time. - - + + - T+2 L+2 M0 I0 Θ0 N0 J0 + T+4 L-2 M-1 I+1 Θ0 N0 J0 - AreaSquareTimeUnit - AreaSquareTimeUnit + JosephsonConstantUnit + JosephsonConstantUnit - + + + + + PureParallelWorkflow + A workflow that is the concurrent evolution of two or more tasks, not communicacting between themselves. + EmbarassinglyParallelWorkflow + PureParallelWorkflow + A workflow that is the concurrent evolution of two or more tasks, not communicacting between themselves. + + + - T-1 L+3 M0 I-1 Θ0 N0 J0 + T+1 L0 M-1 I+1 Θ0 N0 J0 - ReciprocalElectricChargeDensityUnit - ReciprocalElectricChargeDensityUnit + ElectricChargePerMassUnit + ElectricChargePerMassUnit - + - - - - - - - - DecayConstant - Disintegrations per unit time dN/dt for an atomic nucleus divided by the number of nuclei N existing at the same time t. - DisintegrationConstant - DecayConstant - https://qudt.org/vocab/quantitykind/DecayConstant - https://www.wikidata.org/wiki/Q11477200 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-11 - 10-24 - Disintegrations per unit time dN/dt for an atomic nucleus divided by the number of nuclei N existing at the same time t. - https://doi.org/10.1351/goldbook.D01538 - - - - - - MassFractionUnit - Unit for quantities of dimension one that are the fraction of two masses. - MassFractionUnit - Unit for quantities of dimension one that are the fraction of two masses. - Unit for mass fraction. - - - - - RedDownQuark - RedDownQuark - - - - - - DirectCoulometryAtControlledPotential - - Direct coulometry at controlled potential is usually carried out in convective mass trans- fer mode using a large surface working electrode. Reference and auxiliary electrodes are placed in separate compartments. The total electric charge is obtained by integration of the I–t curve or can be measured directly using a coulometer. - In principle, the end point at which I = 0, i.e. when the concentration of species under study becomes zero, can be reached only at infinite time. However, in practice, the electrolysis is stopped when the current has decayed to a few percent of the initial value and the charge passed at infinite time is calculated from a plot of charge Q(t) against time t. For a simple system under diffusion control Qt= Q∞[1 − exp(−DAt/Vδ)], where Q∞ = limt→∞Q(t) is the total charge passed at infinite time, D is the diffusion coefficient of the electroactive species, A the electrode area, δ the diffusion layer thickness, and V the volume of the solution. - coulometry at a preselected constant potential of the working electrode - DirectCoulometryAtControlledPotential - coulometry at a preselected constant potential of the working electrode - https://doi.org/10.1515/pac-2018-0109 + + PackingFraction + Quotient of relative mass excess and the nucleon number. + PackingFraction + https://qudt.org/vocab/quantitykind/PackingFraction + https://www.wikidata.org/wiki/Q98058276 + 10-23.1 + Quotient of relative mass excess and the nucleon number. - + + - - RelativeMassExcess - Quotient of mass excess and the unified atomic mass constant. - RelativeMassExcess - https://qudt.org/vocab/quantitykind/RelativeMassExcess - https://www.wikidata.org/wiki/Q98038610 - 10-22.1 - Quotient of mass excess and the unified atomic mass constant. + RadiantEnergy + Mean energy, excluding rest energy, of the particles that are emitted, transferred, or received. + RadiantEnergy + https://www.wikidata.org/wiki/Q1259526 + 10-45 + Mean energy, excluding rest energy, of the particles that are emitted, transferred, or received. - + - + + - - + + T0 L0 M0 I0 Θ-1 N0 J0 - - - - Fugacity - Measure of the tendency of a substance to leave a phase. - Fugacity - https://qudt.org/vocab/quantitykind/Fugacity - https://www.wikidata.org/wiki/Q898412 - 9-20 - Measure of the tendency of a substance to leave a phase. - https://doi.org/10.1351/goldbook.F02543 - - - - - - Nailing - Nailing is joining by hammering or pressing nails (wire pins) as auxiliary parts into the solid material. Several parts are joined by pressing them together (from: DIN 8593 part 3/09.85). - Nageln - Nailing + + PerTemperatureUnit + PerTemperatureUnit - - - - ScanningAugerElectronMicroscopy - - Auger electron spectroscopy (AES or simply Auger) is a surface analysis technique that uses an electron beam to excite electrons on atoms in the particle. Atoms that are excited by the electron beam can emit “Auger” electrons. AES measures the kinetic energies of the emitted electrons. The energy of the emitted electrons is characteristic of elements present at the surface and near the surface of a sample. - AES - ScanningAugerElectronMicroscopy - Auger electron spectroscopy (AES or simply Auger) is a surface analysis technique that uses an electron beam to excite electrons on atoms in the particle. Atoms that are excited by the electron beam can emit “Auger” electrons. AES measures the kinetic energies of the emitted electrons. The energy of the emitted electrons is characteristic of elements present at the surface and near the surface of a sample. + + + PseudoscalarMeson + A meson with spin zero and odd parity. + PseudoscalarMeson + A meson with spin zero and odd parity. + https://en.wikipedia.org/wiki/Pseudoscalar_meson - - - - FormingFromIonised - FormingFromIonised + + + BlueDownAntiQuark + BlueDownAntiQuark - + - T0 L+1 M+1 I0 Θ0 N0 J0 + T+2 L0 M-1 I0 Θ0 N0 J0 - LengthMassUnit - LengthMassUnit + SquareTimePerMassUnit + SquareTimePerMassUnit + + + + + + DataNormalisation + Data normalization involves adjusting raw data to a notionally common scale. + It involves the creation of shifted and/or scaled versions of the values to allow post-processing in a way that eliminates the effects of influences on subsequent properties extraction. + DataNormalisation + Data normalization involves adjusting raw data to a notionally common scale. + It involves the creation of shifted and/or scaled versions of the values to allow post-processing in a way that eliminates the effects of influences on subsequent properties extraction. - + - + - RelaxationTime - time constant for scattering, trapping or annihilation of charge carriers, phonons or other quasiparticles - RelaxationTime - https://www.wikidata.org/wiki/Q106041085 - 12-32.1 - time constant for scattering, trapping or annihilation of charge carriers, phonons or other quasiparticles + WorkFunction + Work function is the energy difference between an electron at rest at infinity and an electron at the Fermi level in the interior of a substance. + least energy required for the emission of a conduction electron. + ElectronWorkFunction + WorkFunction + https://www.wikidata.org/wiki/Q783800 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-06-35 + 12-24.1 + least energy required for the emission of a conduction electron. + https://doi.org/10.1351/goldbook.E02015 - - - - - ComptonWavelength - Quotient of the Planck constant and the product of the mass of the particle and the speed of light in vacuum. - ComptonWavelength - https://qudt.org/vocab/constant/ComptonWavelength - https://www.wikidata.org/wiki/Q1145377 - 10-20 - Quotient of the Planck constant and the product of the mass of the particle and the speed of light in vacuum. - https://en.wikipedia.org/wiki/Compton_wavelength + + + + Welding + Joining process by softening the surfaces to be joined, either by heat or with a solvent (swelling welding, solvent welding), and pressing the softened surfaces together. + Schweißen + Welding - + - - PaperManufacturing - PaperManufacturing + + IsothermalConversion + IsothermalConversion - - - - CSharp - C# - CSharp + + + + VoltagePhasor + Complex representation of an oscillating voltage. + VoltagePhasor + https://qudt.org/vocab/quantitykind/VoltagePhasor + https://www.wikidata.org/wiki/Q78514605 + 6-50 + Complex representation of an oscillating voltage. - - - - PositionVector - Vector quantity from the origin of a coordinate system to a point in space. - PositionVector - https://www.wikidata.org/wiki/Q192388 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=102-03-15 - https://dbpedia.org/page/Position_(geometry) - 3-1.10 - Vector quantity from the origin of a coordinate system to a point in space. - https://en.wikipedia.org/wiki/Position_(geometry) + + + + Punctuation + Punctuation - + - - + - - T-2 L+2 M+1 I0 Θ-1 N-1 J0 + + - - EntropyPerAmountUnit - EntropyPerAmountUnit + + + + AcceptorDensity + quotient of number of acceptor levels and volume. + AcceptorDensity + https://qudt.org/vocab/quantitykind/AcceptorDensity + https://www.wikidata.org/wiki/Q105979968 + 12-29.5 + quotient of number of acceptor levels and volume. - + - - ThreePointBendingTesting - - Method of mechanical testing that provides values for the modulus of elasticity in bending, flexural stress, flexural strain, and the flexural stress–strain response of a material sample - ThreePointFlexuralTest - ThreePointBendingTesting - https://www.wikidata.org/wiki/Q2300905 - Method of mechanical testing that provides values for the modulus of elasticity in bending, flexural stress, flexural strain, and the flexural stress–strain response of a material sample - https://en.wikipedia.org/wiki/Three-point_flexural_test + + ConductometricTitration + Titration in which the electric conductivity of a solution is measured as a function of the amount of titrant added. The equivalence-point is obtained as the intersection of linear parts of the conductance G, versus titrant volume V, curve. The method can be used for deeply coloured or turbid solutions. Acid-base and precipitation reactions are most frequently used. The method is based on replacing an ionic species of the analyte with another species, cor- responding to the titrant or the product with significantly different conductance. + ConductometricTitration + https://www.wikidata.org/wiki/Q11778221 + Titration in which the electric conductivity of a solution is measured as a function of the amount of titrant added. The equivalence-point is obtained as the intersection of linear parts of the conductance G, versus titrant volume V, curve. The method can be used for deeply coloured or turbid solutions. Acid-base and precipitation reactions are most frequently used. The method is based on replacing an ionic species of the analyte with another species, cor- responding to the titrant or the product with significantly different conductance. + https://doi.org/10.1515/pac-2018-0109 - + + + + SpecificHelmholtzEnergy + Helmholtz energy per unit mass. + SpecificHelmholtzEnergy + https://qudt.org/vocab/quantitykind/SpecificHelmholtzEnergy + https://www.wikidata.org/wiki/Q76359554 + 5-21.4 + Helmholtz energy per unit mass. + + + - + - - - ElectronDensity - Number of electrons in conduction band per volume. - ElectronDensity - https://qudt.org/vocab/quantitykind/ElectronDensity - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=705-06-05 - 12-29.1 - Number of electrons in conduction band per volume. + + DynamicViscosity + The measure of the resistance of a fluid to flow when an external force is applied. + Viscosity + DynamicViscosity + https://qudt.org/vocab/quantitykind/DynamicViscosity + https://www.wikidata.org/wiki/Q15152757 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-34 + 4-24 + The measure of the resistance of a fluid to flow when an external force is applied. + https://doi.org/10.1351/goldbook.D01877 - + - - - CoherenceLength - Distance in a superconductor over which the effect of a perturbation is appreciable at zero thermodynamic temperature - CoherenceLength - https://www.wikidata.org/wiki/Q1778793 - 12-38.2 - Distance in a superconductor over which the effect of a perturbation is appreciable at zero thermodynamic temperature + + ReactivePower + Imaginary part of the complex power. + ReactivePower + https://qudt.org/vocab/quantitykind/ReactivePower + https://www.wikidata.org/wiki/Q2144613 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-11-44 + 6-60 + Imaginary part of the complex power. - - - - - PropagationCoefficient - Measure of the change of amplitude and phase angle of a plane wave propagating in a given direction. - PropagationCoefficient - https://qudt.org/vocab/quantitykind/PropagationCoefficient.html - https://www.wikidata.org/wiki/Q1434913 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-10-18 - 3-26.3 - Measure of the change of amplitude and phase angle of a plane wave propagating in a given direction. + + + + Crystal + A material is a crystal if it has essentially a sharp diffraction pattern. + +A solid is a crystal if it has essentially a sharp diffraction pattern. The word essentially means that most of the intensity of the diffraction is concentrated in relatively sharp Bragg peaks, besides the always present diffuse scattering. In all cases, the positions of the diffraction peaks can be expressed by + + +H=∑ni=1hia∗i (n≥3) + Crystal + A material is a crystal if it has essentially a sharp diffraction pattern. + +A solid is a crystal if it has essentially a sharp diffraction pattern. The word essentially means that most of the intensity of the diffraction is concentrated in relatively sharp Bragg peaks, besides the always present diffuse scattering. In all cases, the positions of the diffraction peaks can be expressed by + + +H=∑ni=1hia∗i (n≥3) - + + + + + + + + + + + + + + + + + + + BottomQuark + BottomQuark + https://en.wikipedia.org/wiki/Bottom_quark + + + + + + + + + + + + + + + + + + + + + UpQuarkType + UpQuarkType + + + - T-3 L+2 M+1 I-1 Θ-1 N0 J0 + T0 L-2 M0 I+1 Θ-1 N0 J0 - ElectricPotentialPerTemperatureUnit - ElectricPotentialPerTemperatureUnit + ElectricCurrentDensityPerTemperatureUnit + ElectricCurrentDensityPerTemperatureUnit - - - - - StandardAbsoluteActivityOfSolvent - StandardAbsoluteActivityOfSolvent - https://www.wikidata.org/wiki/Q89556185 - 9-27.3 + + + + RapidPrototyping + Application of additive manufacturing intended for reducing the time needed for producing prototypes. + RapidPrototyping + Application of additive manufacturing intended for reducing the time needed for producing prototypes. - - - Positron - Positron + + + + Chronoamperometry + Amperometry in which the current is measured as a function of time after a change in the applied potential. If the potential step is from a potential at which no current flows (i.e., at which the oxidation or reduction of the electrochemically active species does not take place) to one at which the current is limited by diffusion (see diffusion-limited current), the current obeys the Cottrell equation. + AmperiometricDetection + AmperometricCurrentTimeCurve + Chronoamperometry + Amperometry in which the current is measured as a function of time after a change in the applied potential. If the potential step is from a potential at which no current flows (i.e., at which the oxidation or reduction of the electrochemically active species does not take place) to one at which the current is limited by diffusion (see diffusion-limited current), the current obeys the Cottrell equation. + https://doi.org/10.1515/pac-2018-0109 - - - - C - C + + + + + NumberOfTurnsInAWinding + NumberOfTurnsInAWinding + https://www.wikidata.org/wiki/Q77995997 + 6-38 - + + + + SamplePreparationParameter + + Parameter used for the sample preparation process + SamplePreparationParameter + Parameter used for the sample preparation process + + + - + + - - + + T+2 L+1 M-2 I0 Θ0 N+1 J0 - - - - VolumicTotalCrossSection - Product of the number density na of the atoms and the cross section σ_tot for a given type of atoms - MacroscopicTotalCrossSection - VolumicTotalCrossSection - https://qudt.org/vocab/quantitykind/MacroscopicTotalCrossSection - https://www.wikidata.org/wiki/Q98280548 - 10-42.2 - Product of the number density na of the atoms and the cross section σ_tot for a given type of atoms + + AmountPerMassPressureUnit + AmountPerMassPressureUnit - - - - LiquidGasSuspension - A coarse dispersion of gas in a liquid continuum phase. - LiquidGasSuspension - A coarse dispersion of gas in a liquid continuum phase. - Sparkling water + + + + NanoMaterial + Nanomaterials are Materials possessing, at minimum, one external dimension measuring 1-100nm + NanoMaterial + Nanomaterials are Materials possessing, at minimum, one external dimension measuring 1-100nm - - - - Annealing - heat treatment consisting of heating and soaking at a suitable temperature, followed by cooling under conditions such that, after return to ambient temperature, the metal will be in a structural state closer to that of equilibrium - Annealing - heat treatment consisting of heating and soaking at a suitable temperature, followed by cooling under conditions such that, after return to ambient temperature, the metal will be in a structural state closer to that of equilibrium + + + + SizeDefinedMaterial + SizeDefinedMaterial - + + + + + + + + + + + + + + + + + SecondGenerationFermion + SecondGenerationFermion + + + + + + Spacing + Spacing + + + - - RadiusOfCurvature - Radius of the osculating circle of a planar curve at a particular point of the curve. - RadiusOfCurvature - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-01-30 - https://dbpedia.org/page/Radius_of_curvature - 3-1.12 - Radius of the osculating circle of a planar curve at a particular point of the curve. - https://en.wikipedia.org/wiki/Radius_of_curvature + + + PhaseAngle + Angular measure between the positive real axis and the radius of the polar representation of the complex number in the complex plane. + PhaseAngle + https://www.wikidata.org/wiki/Q415829 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-07-04 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=141-01-01 + 3-7 + Angular measure between the positive real axis and the radius of the polar representation of the complex number in the complex plane. - - - RedCharmQuark - RedCharmQuark + + + + + + + T0 L+2 M0 I0 Θ+1 N0 J0 + + + AreaTemperatureUnit + AreaTemperatureUnit - + - - - NuclearRadius - Conventional radius of sphere in which the nuclear matter is included, - NuclearRadius - https://qudt.org/vocab/quantitykind/NuclearRadius - https://www.wikidata.org/wiki/Q3535676 - 10-19.1 - Conventional radius of sphere in which the nuclear matter is included, + + + + + T-1 L+2 M0 I0 Θ0 N-1 J0 + + + DiffusivityUnit + DiffusivityUnit - + - - - ElementaryCharge - The DBpedia definition (http://dbpedia.org/page/Elementary_charge) is outdated as May 20, 2019. It is now an exact quantity. - The magnitude of the electric charge carried by a single electron. It defines the base unit Ampere in the SI system. - ElementaryCharge - http://qudt.org/vocab/quantitykind/ElementaryCharge - 10-5.1 - The magnitude of the electric charge carried by a single electron. It defines the base unit Ampere in the SI system. - https://doi.org/10.1351/goldbook.E02032 + + + ResidualResistivity + for metals, the resistivity extrapolated to zero thermodynamic temperature + ResidualResistivity + https://qudt.org/vocab/quantitykind/ResidualResistivity + https://www.wikidata.org/wiki/Q25098876 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=815-13-61 + 12-17 + for metals, the resistivity extrapolated to zero thermodynamic temperature - - - - - - - - - - - - - - - - - - - GaugeBoson - A bosonic elementary particle that mediates interactions among elementary fermions, and thus acts as a force carrier. - All known gauge bosons have a spin of 1 and are hence also vector bosons. - GaugeBoson - A bosonic elementary particle that mediates interactions among elementary fermions, and thus acts as a force carrier. - All known gauge bosons have a spin of 1 and are hence also vector bosons. - Gauge bosons can carry any of the four fundamental interactions of nature. - https://en.wikipedia.org/wiki/Gauge_boson + + + + + + + T-2 L0 M0 I0 Θ0 N0 J0 + + + AngularFrequencyUnit + AngularFrequencyUnit - - - AtomisticModel - A physics-based model based on a physics equation describing the behaviour of atoms. - AtomisticModel - A physics-based model based on a physics equation describing the behaviour of atoms. + + + + DifferentialLinearPulseVoltammetry + Differential Pulse Voltammetry in which small potential pulses are superimposed onto a linearly varying potential. + DifferentialLinearPulseVoltammetry + Differential Pulse Voltammetry in which small potential pulses are superimposed onto a linearly varying potential. - - + + - T+1 L+1 M0 I+1 Θ0 N0 J0 + T-3 L+1 M+1 I-1 Θ0 N0 J0 - LengthTimeCurrentUnit - LengthTimeCurrentUnit + ElectricFieldStrengthUnit + ElectricFieldStrengthUnit - + - - - PackingFraction - Quotient of relative mass excess and the nucleon number. - PackingFraction - https://qudt.org/vocab/quantitykind/PackingFraction - https://www.wikidata.org/wiki/Q98058276 - 10-23.1 - Quotient of relative mass excess and the nucleon number. - - - - - - DataProcessingApplication - DataProcessingApplication + + + PlanckConstant + The quantum of action. It defines the kg base unit in the SI system. + PlanckConstant + http://qudt.org/vocab/constant/PlanckConstant + The quantum of action. It defines the kg base unit in the SI system. + https://doi.org/10.1351/goldbook.P04685 - + - T-2 L+2 M+1 I-1 Θ0 N0 J0 + T+2 L0 M0 I0 Θ0 N0 J0 - MagneticFluxUnit - MagneticFluxUnit - - - - - - - - - - - - - MolarVolume - Volume per amount of substance. - MolarVolume - https://qudt.org/vocab/quantitykind/MolarVolume - https://www.wikidata.org/wiki/Q487112 - 9-5 - Volume per amount of substance. + SquareTimeUnit + SquareTimeUnit - + - - - InjectionMolding - InjectionMolding + + Tempering + Process consisting of two steps: - first, the steel is heated in a quenching treatment to a temperature above Ac3 and then rapidly cooled in a liquid to produce a process-specific grain structure; - subsequently, the steel is heated to a specific temperature during tempering to set the desired property and cooled in air. + QuenchingAndTempering + Vergüten + Tempering + Process consisting of two steps: - first, the steel is heated in a quenching treatment to a temperature above Ac3 and then rapidly cooled in a liquid to produce a process-specific grain structure; - subsequently, the steel is heated to a specific temperature during tempering to set the desired property and cooled in air. - - - - - - Hypothesis - A hypothesis is a theory, estimated and objective, since its estimated premises are objective. - Hypothesis - A hypothesis is a theory, estimated and objective, since its estimated premises are objective. + + + TemporallyRedundant + A whole with temporal parts of its same type. + TemporallyRedundant + A whole with temporal parts of its same type. - + - - Grinding - Removal of material by means of rigid or flexible discs or belts containing abrasives. - Schleifen - Grinding + + SupplyChain + A supply chain is a system of organizations, people, activities, information, and resources involved in supplying a product or service to a consumer. + SupplyChain + A supply chain is a system of organizations, people, activities, information, and resources involved in supplying a product or service to a consumer. - - - - Spacing - Spacing + + + + + + + T-2 L+3 M+1 I0 Θ0 N-1 J0 + + + EnergyLengthPerAmountUnit + EnergyLengthPerAmountUnit - + - + + - - LorenzCoefficient - Quotient of thermal conductivity, and the product of electric conductivity and thermodynamic temperature. - LorenzNumber - LorenzCoefficient - https://qudt.org/vocab/quantitykind/LorenzCoefficient - https://www.wikidata.org/wiki/Q105728754 - 12-18 - Quotient of thermal conductivity, and the product of electric conductivity and thermodynamic temperature. + Radioactivity + Decays per unit time. + RadioactiveActivity + Radioactivity + http://qudt.org/vocab/quantitykind/SpecificActivity + Decays per unit time. + https://doi.org/10.1351/goldbook.A00114 - - - + + - - - T-2 L+1 M0 I0 Θ0 N0 J0 - + + + + + + - AccelerationUnit - AccelerationUnit - - - - - PhysicalPhenomena - A CausalSystem that includes quantum parts that are not bonded with the rest. - PhysicalPhenomena - A CausalSystem that includes quantum parts that are not bonded with the rest. - - - - - - ElectroSinterForging - ElectroSinterForging + NonPrefixedUnit + A measurement unit symbol that do not have a metric prefix as a direct spatial part. + NonPrefixedUnit + A measurement unit symbol that do not have a metric prefix as a direct spatial part. - + - - - - - T0 L0 M-1 I0 Θ0 N+1 J0 - - - AmountPerMassUnit - AmountPerMassUnit + + + TotalCrossSection + Sum of all cross sections corresponding to the various reactions or processes between an incident particle of specified type and energy and a target entity. + TotalCrossSection + https://qudt.org/vocab/quantitykind/TotalCrossSection + https://www.wikidata.org/wiki/Q98206553 + 10-38.2 + Sum of all cross sections corresponding to the various reactions or processes between an incident particle of specified type and energy and a target entity. - - - - + + + - - T-2 L0 M0 I0 Θ+1 N0 J0 + + - - TemperaturePerSquareTimeUnit - TemperaturePerSquareTimeUnit + + + AtomicPhysicsCrossSection + Measure of probability that a specific process will take place in a collision of two particles. + AtomicPhysicsCrossSection + https://qudt.org/vocab/quantitykind/Cross-Section.html + https://www.wikidata.org/wiki/Q17128025 + 10-38.1 + Measure of probability that a specific process will take place in a collision of two particles. - - - - Welding - Joining process by softening the surfaces to be joined, either by heat or with a solvent (swelling welding, solvent welding), and pressing the softened surfaces together. - Schweißen - Welding + + + + NewtonianConstantOfGravity + Physical constant in Newton's law of gravitation and in Einstein's general theory of relativity. + NewtonianConstantOfGravity + http://qudt.org/vocab/constant/NewtonianConstantOfGravitation + https://doi.org/10.1351/goldbook.G02695 - - - - XpsVariableKinetic - X-ray photoelectron spectroscopy (XPS), also known as ESCA (electron spectroscopy for chemical analysis) is a surface analysis technique which provides both elemental and chemical state information virtually without restriction on the type of material which can be analysed. It is a relatively simple technique where the sample is illuminated with X-rays which have enough energy to eject an electron from the atom. These ejected electrons are known as photoelectrons. The kinetic energy of these emitted electrons is characteristic of the element from which the photoelectron originated. The position and intensity of the peaks in an energy spectrum provide the desired chemical state and quantitative information. The surface sensitivity of XPS is determined by the distance that that photoelectron can travel through the material without losing any kinteic energy. These elastiaclly scattered photoelectrons contribute to the photoelectron peak, whilst photoelectrons that have been inelastically scattered, losing some kinetic energy before leaving the material, will contribute to the spectral background. - Electron spectroscopy for chemical analysis (ESCA) - X-ray photoelectron spectroscopy (XPS) - XpsVariableKinetic - X-ray photoelectron spectroscopy (XPS), also known as ESCA (electron spectroscopy for chemical analysis) is a surface analysis technique which provides both elemental and chemical state information virtually without restriction on the type of material which can be analysed. It is a relatively simple technique where the sample is illuminated with X-rays which have enough energy to eject an electron from the atom. These ejected electrons are known as photoelectrons. The kinetic energy of these emitted electrons is characteristic of the element from which the photoelectron originated. The position and intensity of the peaks in an energy spectrum provide the desired chemical state and quantitative information. The surface sensitivity of XPS is determined by the distance that that photoelectron can travel through the material without losing any kinteic energy. These elastiaclly scattered photoelectrons contribute to the photoelectron peak, whilst photoelectrons that have been inelastically scattered, losing some kinetic energy before leaving the material, will contribute to the spectral background. + + + + + + ThermalDiffusionFactor + Quotient of the thermal diffusion ratio and the product of the local amount-of-substance fractions. + ThermalDiffusionFactor + https://qudt.org/vocab/quantitykind/ThermalDiffusionFactor + https://www.wikidata.org/wiki/Q96249629 + 9-40.2 + Quotient of the thermal diffusion ratio and the product of the local amount-of-substance fractions. - + - - Work - Product of force and displacement. - Work - http://qudt.org/vocab/quantitykind/Work - Product of force and displacement. - 4-28.4 - https://doi.org/10.1351/goldbook.W06684 - - - - - T-2 L+1 M+1 I-2 Θ0 N0 J0 + T-3 L+2 M+1 I0 Θ0 N0 J0 - PermeabilityUnit - PermeabilityUnit + PowerUnit + PowerUnit - - - - GravitySintering - ISO 3252:2019 Powder metallurgy -loose-powder sintering, gravity sintering: sintering of uncompacted powder - Loose-powderSintering - PressurelessSintering - GravitySintering + + + + + RatioOfSpecificHeatCapacities + Ratio of specific heat capacity at constant pressure cp to specific heat capacity at constant volume cV, thus γ = cp/cV. + RatioOfSpecificHeatCapacities + https://qudt.org/vocab/quantitykind/HeatCapacityRatio + https://www.wikidata.org/wiki/Q503869 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-51 + 5-17.1 + Ratio of specific heat capacity at constant pressure cp to specific heat capacity at constant volume cV, thus γ = cp/cV. - - - - MembraneOsmometry - - In the membrane osmometry technique, a pure solvent and polymer solution are separated by a semipermeable membrane, due to the higher chemical potential of the solvent in the pure solvent than in polymer solution, the solvent starts moving towards the polymer solution. - MembraneOsmometry - In the membrane osmometry technique, a pure solvent and polymer solution are separated by a semipermeable membrane, due to the higher chemical potential of the solvent in the pure solvent than in polymer solution, the solvent starts moving towards the polymer solution. + + + + Unknown + The dependent variable for which an equation has been written. + Unknown + The dependent variable for which an equation has been written. + Velocity, for the Navier-Stokes equation. - - - - SparkPlasmaSintering - SparkPlasmaSintering + + + + + + + + + + + + + + + + + + + DownAntiQuark + DownAntiQuark - + - ResourceIdentifier + + FourierTransformInfraredSpectroscopy - ResourceIdentifier + A technique used to obtain an infrared spectrum of absorption or emission of a solid, liquid, or gas + FTIR + FourierTransformInfraredSpectroscopy + https://www.wikidata.org/wiki/Q901559 + A technique used to obtain an infrared spectrum of absorption or emission of a solid, liquid, or gas + https://en.wikipedia.org/wiki/Fourier-transform_infrared_spectroscopy - + + + + QueryLanguage + A construction language used to make queries in databases and information systems. + QueryLanguage + A construction language used to make queries in databases and information systems. + SQL, SPARQL + https://en.wikipedia.org/wiki/Query_language + + + - + - - FundamentalLatticeVector - Fundamental translation vector for the crystal lattice. - FundamentalLatticeVector - https://qudt.org/vocab/quantitykind/FundamentalLatticeVector - https://www.wikidata.org/wiki/Q105451063 - 12-1.2 - Fundamental translation vector for the crystal lattice. + + + MeanMassRange + Product of the mean linear range R and the mass density ρ of the material. + MeanMassRange + https://qudt.org/vocab/quantitykind/MeanMassRange + https://www.wikidata.org/wiki/Q98681670 + 10-57 + Product of the mean linear range R and the mass density ρ of the material. + https://doi.org/10.1351/goldbook.M03783 - - - - Assignment - A estimation of a property by a criteria based on the pre-existing knowledge of the estimator. - Assignment - A estimation of a property by a criteria based on the pre-existing knowledge of the estimator. - The Argon gas in my bottle has ionisation energy of 15.7596 eV. This is not measured but assigned to this material by previous knowledge. + + + + + CyclotronAngularFrequency + Quotient of the product of the electric charge of a particle and the magnitude of the magnetic flux density of the magnetic field, and the particle mass. + CyclotronAngularFrequency + https://qudt.org/vocab/quantitykind/CyclotronAngularFrequency + https://www.wikidata.org/wiki/Q97708211 + 10-16 + Quotient of the product of the electric charge of a particle and the magnitude of the magnetic flux density of the magnetic field, and the particle mass. + + + + + + + + + + + + + RecombinationCoefficient + Coefficient in the law of recombination, + RecombinationCoefficient + https://qudt.org/vocab/quantitykind/RecombinationCoefficient + https://www.wikidata.org/wiki/Q98842099 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-06-47 + 10-63 + Coefficient in the law of recombination, + + + + + + UltrasonicTesting + Ultrasonic testing (UT) is a family of non-destructive testing techniques based on the propagation of ultrasonic waves in the object or material tested. In most common UT applications, very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz, and occasionally up to 50 MHz, are transmitted into materials to detect internal flaws or to characterize materials. A common example is ultrasonic thickness measurement, which tests the thickness of the test object, for example, to monitor pipework corrosion. Ultrasonic testing is often performed on steel and other metals and alloys, though it can also be used on concrete, wood and composites, albeit with less resolution. It is used in many industries including steel and aluminium construction, metallurgy, manufacturing, aerospace, automotive and other transportation sectors. + UltrasonicTesting + Ultrasonic testing (UT) is a family of non-destructive testing techniques based on the propagation of ultrasonic waves in the object or material tested. In most common UT applications, very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz, and occasionally up to 50 MHz, are transmitted into materials to detect internal flaws or to characterize materials. A common example is ultrasonic thickness measurement, which tests the thickness of the test object, for example, to monitor pipework corrosion. Ultrasonic testing is often performed on steel and other metals and alloys, though it can also be used on concrete, wood and composites, albeit with less resolution. It is used in many industries including steel and aluminium construction, metallurgy, manufacturing, aerospace, automotive and other transportation sectors. + + + + + + CPlusPlus + A language object respecting the syntactic rules of C++. + C++ + CPlusPlus + A language object respecting the syntactic rules of C++. + + + + + + Planing + Type of scratching behaviour where the scratching force and the (displacement) deflection of the scratching tip are constant over the scratching distance during the test. + Hobeln + Planing + + + + + + + + + + + + + GasMixture + GasMixture + + + + + + Inequality + A relation which makes a non-equal comparison between two numbers or other mathematical expressions. + Inequality + A relation which makes a non-equal comparison between two numbers or other mathematical expressions. + f(x) > 0 @@ -22702,278 +22331,320 @@ loose-powder sintering, gravity sintering: sintering of uncompacted powderMass spectrometry is a powerful analytical technique used to quantify known materials, to identify unknown compounds within a sample, and to elucidate the structure and chemical properties of different molecules. - - - - CharacterisationDataValidation - Procedure to validate the characterisation data. - CharacterisationDataValidation - Procedure to validate the characterisation data. + + + + Presses + Presses + + + + + + ReactionSintering + ISO 3252:2019 Powder metallurgy +reaction sintering: process wherein at least two constituents of a powder mixture react during sintering + ReactionSintering + + + + + + Smoke + Smoke is a solid aerosol made of particles emitted when a material undergoes combustion or pyrolysis. + Smoke + Smoke is a solid aerosol made of particles emitted when a material undergoes combustion or pyrolysis. + + + + + + SolidAerosol + An aerosol composed of fine solid particles in air or another gas. + SolidAerosol + An aerosol composed of fine solid particles in air or another gas. + + + + + + + + + T-1 L0 M0 I0 Θ0 N+1 J0 + + + CatalyticActivityUnit + CatalyticActivityUnit - + - - - TotalCrossSection - Sum of all cross sections corresponding to the various reactions or processes between an incident particle of specified type and energy and a target entity. - TotalCrossSection - https://qudt.org/vocab/quantitykind/TotalCrossSection - https://www.wikidata.org/wiki/Q98206553 - 10-38.2 - Sum of all cross sections corresponding to the various reactions or processes between an incident particle of specified type and energy and a target entity. + + + + + T-4 L+2 M+1 I-1 Θ0 N0 J0 + + + ElectricPotentialPerTimeUnit + ElectricPotentialPerTimeUnit - - - - Inequality - A relation which makes a non-equal comparison between two numbers or other mathematical expressions. - Inequality - A relation which makes a non-equal comparison between two numbers or other mathematical expressions. - f(x) > 0 + + + + + + + T+2 L+1 M-1 I0 Θ+1 N0 J0 + + + TemperaturePerPressureUnit + TemperaturePerPressureUnit - + - + - - Action - Physical quantity of dimension energy × time. - Action - https://qudt.org/vocab/quantitykind/Action - https://www.wikidata.org/wiki/Q846785 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-51 - 4-32 - Physical quantity of dimension energy × time. + + MagneticVectorPotential + Vector potential of the magnetic flux density. + MagneticVectorPotential + https://qudt.org/vocab/quantitykind/MagneticVectorPotential + https://www.wikidata.org/wiki/Q2299100 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-23 + 6-32 + Vector potential of the magnetic flux density. - - - + + + + Modeller + A estimator that uses modelling to declare a property of an object (i.e. infer a property from other properties). + Modeller + A estimator that uses modelling to declare a property of an object (i.e. infer a property from other properties). + + + + + + - - + + T-6 L-2 M+2 I0 Θ0 N0 J0 - - - - - - - - - MathematicalConstruct - MathematicalConstruct + SquarePressurePerSquareTimeUnit + SquarePressurePerSquareTimeUnit - + + + + + RotationalDisplacement + Quotient of the traversed circular path length of a point in space during a rotation and its distance from the axis or centre of rotation. + AngularDisplacement + RotationalDisplacement + https://www.wikidata.org/wiki/Q3305038 + 3-6 + Quotient of the traversed circular path length of a point in space during a rotation and its distance from the axis or centre of rotation. + https://en.wikipedia.org/wiki/Angular_displacement + + + + + + + MaximumBetaParticleEnergy + Maximum kinetic energy of the emitted beta particle produced in the nuclear disintegration process. + MaximumBetaParticleEnergy + https://qudt.org/vocab/quantitykind/MaximumBeta-ParticleEnergy + https://www.wikidata.org/wiki/Q98148038 + 10-33 + Maximum kinetic energy of the emitted beta particle produced in the nuclear disintegration process. + + + - T0 L-2 M0 I+1 Θ-1 N0 J0 + T-1 L-2 M0 I0 Θ0 N0 J0 - ElectricCurrentDensityPerTemperatureUnit - ElectricCurrentDensityPerTemperatureUnit + PerAreaTimeUnit + PerAreaTimeUnit - - - - CentrifugalCasting - CentrifugalCasting + + + + PhysicsEquationSolution + A function solution of a physics equation that provides a methods for the prediction of some quantitiative properties of an object. + This must be a mathematical function v(t), x(t). +A dataset as solution is a conventional sign. + PhysicsEquationSolution + A function solution of a physics equation that provides a methods for the prediction of some quantitiative properties of an object. + A parabolic function is a prediction of the trajectory of a falling object in a gravitational field. While it has predictive capabilities it lacks of an analogical character, since it does not show the law behind that trajectory. - + - - - StandardAmountConcentration - Chosen value of amount concentration, usually equal to 1 mol dm−3. - StandardConcentration - StandardMolarConcentration - StandardAmountConcentration - https://www.wikidata.org/wiki/Q88871689 - Chosen value of amount concentration, usually equal to 1 mol dm−3. - 9-12.2 - https://doi.org/10.1351/goldbook.S05909 + + + + + + + + + Exposure + Absolute value of the electric charge of ions produced in dry air by X- or gamma radiation per mass of air. + Exposure + https://qudt.org/vocab/quantitykind/Exposure + https://www.wikidata.org/wiki/Q336938 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-32 + 10-88 + Absolute value of the electric charge of ions produced in dry air by X- or gamma radiation per mass of air. - + - - VoltagePhasor - Complex representation of an oscillating voltage. - VoltagePhasor - https://qudt.org/vocab/quantitykind/VoltagePhasor - https://www.wikidata.org/wiki/Q78514605 - 6-50 - Complex representation of an oscillating voltage. + + + Kerma + Kinetic energy released per mass. + Kerma + https://qudt.org/vocab/quantitykind/Kerma + https://www.wikidata.org/wiki/Q1739288 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-36 + 10-86.1 + Kinetic energy released per mass. - - - - - - - - - - - - - - - - - - - - - - ClassicallyDefinedMaterial - ClassicallyDefinedMaterial - + + + + + + + + + + AvogadroConstant + The DBpedia definition (http://dbpedia.org/page/Avogadro_constant) is outdated as May 20, 2019. It is now an exact quantity. + The number of constituent particles, usually atoms or molecules, that are contained in the amount of substance given by one mole. - - - - TransportationDevice - TransportationDevice +It defines the base unit mole in the SI system. + AvogadroConstant + http://qudt.org/vocab/constant/AvogadroConstant + The number of constituent particles, usually atoms or molecules, that are contained in the amount of substance given by one mole. + +It defines the base unit mole in the SI system. + https://doi.org/10.1351/goldbook.A00543 - + - - - PreparedSample + + XrayPowderDiffraction - The sample after a preparation process. - PreparedSample - The sample after a preparation process. + a method for analyzing the crystal structure of powdered materials by measuring the diffraction patterns produced when X-rays interact with randomly oriented crystallites within the sample + XRPD + XrayPowderDiffraction + a method for analyzing the crystal structure of powdered materials by measuring the diffraction patterns produced when X-rays interact with randomly oriented crystallites within the sample + https://en.wikipedia.org/wiki/Powder_diffraction - - + + - - + + - - - - - - - - - - - - - - - - - - - - - - - MaterialsModel - A solvable set of one Physics Equation and one or more Materials Relations. - https://op.europa.eu/en/publication-detail/-/publication/ec1455c3-d7ca-11e6-ad7c-01aa75ed71a1 - MaterialsModel - A solvable set of one Physics Equation and one or more Materials Relations. - - - - - - - - - T+4 L-4 M-2 I0 Θ0 N0 J0 - - - ReciprocalSquareEnergyUnit - ReciprocalSquareEnergyUnit + + + ElectricFieldStrength + Vector field quantity E which exerts on any charged particle at rest a force F equal to the product of E and the electric charge Q of the particle. + ElectricFieldStrength + https://qudt.org/vocab/quantitykind/ElectricFieldStrength + https://www.wikidata.org/wiki/Q20989 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-18 + 6-10 + Vector field quantity E which exerts on any charged particle at rest a force F equal to the product of E and the electric charge Q of the particle. - - - - - - - T+1 L+2 M0 I0 Θ0 N0 J0 - - - AreaTimeUnit - AreaTimeUnit + + + + DifferentialScanningCalorimetry + Differential scanning calorimetry (DSC) is a thermoanalytical technique in which the difference in the amount of heat required to increase the temperature of a sample and reference is measured as a function of temperature. Both the sample and reference are maintained at nearly the same temperature throughout the experiment. Generally, the temperature program for a DSC analysis is designed such that the sample holder temperature increases linearly as a function of time. The reference sample should have a well-defined heat capacity over the range of temperatures to be scanned. Additionally, the reference sample must be stable, of high purity, and must not experience much change across the temperature scan. Typically, reference standards have been metals such as indium, tin, bismuth, and lead, but other standards such as polyethylene and fatty acids have been proposed to study polymers and organic compounds, respectively. + DSC + DifferentialScanningCalorimetry + Differential scanning calorimetry (DSC) is a thermoanalytical technique in which the difference in the amount of heat required to increase the temperature of a sample and reference is measured as a function of temperature. Both the sample and reference are maintained at nearly the same temperature throughout the experiment. Generally, the temperature program for a DSC analysis is designed such that the sample holder temperature increases linearly as a function of time. The reference sample should have a well-defined heat capacity over the range of temperatures to be scanned. Additionally, the reference sample must be stable, of high purity, and must not experience much change across the temperature scan. Typically, reference standards have been metals such as indium, tin, bismuth, and lead, but other standards such as polyethylene and fatty acids have been proposed to study polymers and organic compounds, respectively. - + - - - - + + + + + + + + - - Array3D - 3-dimensional array who's spatial direct parts are matrices. - 3DArray - Array3D - 3-dimensional array who's spatial direct parts are matrices. + + ArithmeticExpression + ArithmeticExpression + 2+2 - - - - ArithmeticEquation - ArithmeticEquation - 1 + 1 = 2 + + + + + ElectronCharge + The charge of an electron. + The negative of ElementaryCharge. + ElectronCharge + The charge of an electron. + https://doi.org/10.1351/goldbook.E01982 - - - - PotentialEnergy - The energy possessed by a body by virtue of its position or orientation in a potential field. - PotentialEnergy - http://qudt.org/vocab/quantitykind/PotentialEnergy - 4-28.1 - The energy possessed by a body by virtue of its position or orientation in a potential field. - https://doi.org/10.1351/goldbook.P04778 + + + + CSharp + C# + CSharp - + - + - + - + @@ -22981,251 +22652,386 @@ loose-powder sintering, gravity sintering: sintering of uncompacted powder - ElectronType - ElectronType + DownQuarkType + DownQuarkType - - - - - SerialStep - SerialStep + + + + + + + T+1 L-2 M0 I0 Θ0 N0 J+1 + + + IlluminanceTimeUnit + IlluminanceTimeUnit - - - NonNumericalData - Data that are non-quantitatively interpreted (e.g., qualitative data, types). - NonNumericalData - Data that are non-quantitatively interpreted (e.g., qualitative data, types). + + + + SandMolds + SandMolds - - - - InspectionDevice - InspectionDevice + + + + SampleInspectionInstrument + + SampleInspectionInstrument - + - - - RelativeLinearStrain - Relative change of length with respect the original length. - RelativeLinearStrain - https://qudt.org/vocab/quantitykind/LinearStrain - https://www.wikidata.org/wiki/Q1990546 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-58 - 4-17.2 - Relative change of length with respect the original length. - https://doi.org/10.1351/goldbook.L03560 + + + MolarInternalEnergy + Internal energy per amount of substance. + MolarInternalEnergy + https://www.wikidata.org/wiki/Q88523106 + 9-6.1 + Internal energy per amount of substance. - - - CausallHairedSystem - CausallHairedSystem + + + + + + + T0 L0 M-1 I0 Θ0 N0 J0 + + + ReciprocalMassUnit + ReciprocalMassUnit - + - - - LinearIonization - Differential quotient of q with respect to l, where q is the average total charge of all positive ions produced by an ionizing charged particle over a path l, divided by the elementary charge. - LinearIonization - https://qudt.org/vocab/quantitykind/LinearIonization - https://www.wikidata.org/wiki/Q98690755 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-03-115 - 10-58 - Differential quotient of q with respect to l, where q is the average total charge of all positive ions produced by an ionizing charged particle over a path l, divided by the elementary charge. + + OxidationNumber + Charge number that an atom within a molecule would have if all the ligands were removed along with the electron pairs that were shared. + OxidationState + OxidationNumber + https://www.wikidata.org/wiki/Q484152 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-01-25 + https://dbpedia.org/page/Oxidation_state + Charge number that an atom within a molecule would have if all the ligands were removed along with the electron pairs that were shared. + https://en.wikipedia.org/wiki/Oxidation_state + https://doi.org/10.1351/goldbook.O04363 - - - ElectronNeutrino - A neutrino belonging to the first generation of leptons. - ElectronNeutrino - A neutrino belonging to the first generation of leptons. - https://en.wikipedia.org/wiki/Electron_neutrino + + + + + FermiAnglularWaveNumber + angular wavenumber of electrons in states on the Fermi sphere + FermiAnglularRepetency + FermiAnglularWaveNumber + https://qudt.org/vocab/quantitykind/FermiAngularWavenumber + https://www.wikidata.org/wiki/Q105554303 + 12-9.2 + angular wavenumber of electrons in states on the Fermi sphere - - - - Galvanizing - Galvanizing + + + + CyclicVoltammetry + Voltammetry in which the electric current is recorded as the electrode potential is varied with time cyclically between two potential limits, normally at a constant scan rate. Cyclic voltammetry is frequently used for the investigation of mechanisms of electrochemical/electrode reactions. The current-potential curve may be modelled to obtain reaction mechanisms and electrochemical parameters. Normally the initial potential is chosen where no electrode reaction occurs and the switching potential is greater (more positive for an oxidation or more negative for a reduction) than the peak potential of the analyte reaction. The initial potential is usually the negative or positive limit of the cycle but can have any value between the two limits, as can the initial scan direction. The limits of the potential are known as the switching potentials. The plot of current against potential is termed a cyclic voltammogram. Usually peak-shaped responses are obtained for scans in both directions. + CV + CyclicVoltammetry + https://www.wikidata.org/wiki/Q1147647 + https://dbpedia.org/page/Cyclic_voltammetry + Voltammetry in which the electric current is recorded as the electrode potential is varied with time cyclically between two potential limits, normally at a constant scan rate. Cyclic voltammetry is frequently used for the investigation of mechanisms of electrochemical/electrode reactions. The current-potential curve may be modelled to obtain reaction mechanisms and electrochemical parameters. Normally the initial potential is chosen where no electrode reaction occurs and the switching potential is greater (more positive for an oxidation or more negative for a reduction) than the peak potential of the analyte reaction. The initial potential is usually the negative or positive limit of the cycle but can have any value between the two limits, as can the initial scan direction. The limits of the potential are known as the switching potentials. The plot of current against potential is termed a cyclic voltammogram. Usually peak-shaped responses are obtained for scans in both directions. + https://en.wikipedia.org/wiki/Cyclic_voltammetry + https://doi.org/10.1515/pac-2018-0109 - + + + + + SolidSol + A type of sol in the form of one solid dispersed in another continuous solid. + SolidSol + A type of sol in the form of one solid dispersed in another continuous solid. + + + - - XrdGrazingIncidence + + RawSample - XrdGrazingIncidence + RawSample - - - Naming - A declaration that provides a sign for an object that is independent from any assignment rule. - Naming - A declaration that provides a sign for an object that is independent from any assignment rule. - A unique id attached to an entity. + + + + CoulometricTitration + Titration in which the titrant is generated electrochemically, either by constant current or at constant potential. The titrant reacts stoichiometrically with the analyte, the amount of which is calculated using Faraday’s laws of electrolysis from the electric charge required to reach the end-point. Coulometric titrations are usually carried out in convective mass transfer mode using a large surface working electrode. The reference and auxiliary electrodes are located in sepa- rate compartments. A basic requirement is a 100 % current efficiency of titrant generation at the working electrode. End-point detection can be accomplished with potentiometry, amperometry, biamperometry, bipotentiometry, photometry, or by using a visual indicator. The main advantages are that titration is possible with less stable titrants, the standardi- zation of titrant is not necessary, the volume of the test solution is not changed, and the method is easily automated. + CoulometricTitration + Titration in which the titrant is generated electrochemically, either by constant current or at constant potential. The titrant reacts stoichiometrically with the analyte, the amount of which is calculated using Faraday’s laws of electrolysis from the electric charge required to reach the end-point. Coulometric titrations are usually carried out in convective mass transfer mode using a large surface working electrode. The reference and auxiliary electrodes are located in sepa- rate compartments. A basic requirement is a 100 % current efficiency of titrant generation at the working electrode. End-point detection can be accomplished with potentiometry, amperometry, biamperometry, bipotentiometry, photometry, or by using a visual indicator. The main advantages are that titration is possible with less stable titrants, the standardi- zation of titrant is not necessary, the volume of the test solution is not changed, and the method is easily automated. - - - - Flanging - Flanging + + + + + + / + + + + Division + Division - - - - PlasmaCutting - PlasmaCutting + + + Positron + Positron - - - - Folding - Folding + + + + + AmountFraction + The amount of a constituent divided by the total amount of all constituents in a mixture. + MoleFraction + AmountFraction + http://qudt.org/vocab/quantitykind/MoleFraction + The amount of a constituent divided by the total amount of all constituents in a mixture. + https://doi.org/10.1351/goldbook.A00296 - - - + + + + + + + + + + + + + 1 + + + - - T+3 L-1 M-1 I0 Θ+1 N0 J0 + + - ThermalResistivityUnit - ThermalResistivityUnit + Real + A real number. + Real + A real number. - + - - - DragCoefficient - Dimensionless parameter to quantify fluid resistance. - DragFactor - DragCoefficient - https://qudt.org/vocab/quantitykind/DragCoefficient - https://www.wikidata.org/wiki/Q1778961 - 4-23.4 - Dimensionless parameter to quantify fluid resistance. + + + + + + + + + DirectionAndEnergyDistributionOfCrossSection + Partial differential quotient of the cross section of a process with respect to the solid angle around a given direction and the energy of a particle scattered in that direction. + DirectionAndEnergyDistributionOfCrossSection + https://qudt.org/vocab/quantitykind/SpectralAngularCrossSection + https://www.wikidata.org/wiki/Q98269571 + 10-41 + Partial differential quotient of the cross section of a process with respect to the solid angle around a given direction and the energy of a particle scattered in that direction. - - - - - StaticFrictionCoefficient - CoefficientOfStaticFriction - StaticFrictionFactor - StaticFrictionCoefficient - https://www.wikidata.org/wiki/Q73695673 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-33 - 4-23.1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Coded + A conventional referring to an object according to a specific code that reflects the results of a specific interaction mechanism and is shared between other interpreters. +A coded is always a partial representation of an object since it reflects the object capability to be part of a specific determination. +A coded is a sort of name or label that we put upon objects that interact with an determiner in the same specific way. + +For example, "hot" objects are objects that interact with an observer through a perception mechanism aimed to perceive an heat source. The code is made of terms such as "hot", "warm", "cold", that commonly refer to the perception of heat. + A conventional that stands for an object according to a code of interpretation to which the interpreter refers. + Let's define the class Colour as the subclass of the coded signs that involve photon emission and electromagnetic radiation sensible observers. +An individual C of this class Colour can be defined be declaring the process individual (e.g. daylight illumination) and the observer (e.g. my eyes) +Stating that an entity E hasCoded C, we mean that it can be observed by such setup of process + observer (i.e. observed by my eyes under daylight). +This definition can be specialised for human eye perception, so that the observer can be a generic human, or to camera perception so that the observer can be a device. +This can be used in material characterization, to define exactly the type of measurement done, including the instrument type. + Coded + A conventional that stands for an object according to a code of interpretation to which the interpreter refers. + A biography that makes use of a code that is provided by the meaning of the element of the language used by the author. + The name "red" that stands for the color of an object. + + + + + + + + + + + + + + Replica + An icon that not only resembles the object, but also can express some of the object's functions. + Replica + An icon that not only resembles the object, but also can express some of the object's functions. + A small scale replica of a plane tested in a wind gallery shares the same functionality in terms of aerodynamic behaviour of the bigger one. + Pinocchio is a functional icon of a boy since it imitates the external behaviour without having the internal biological structure of a human being (it is made of magic wood...). + + + + + + + + + + + + + + Nucleon + Either a proton or a neutron. + Nucleon + Either a proton or a neutron. + https://en.wikipedia.org/wiki/Nucleon - + - + + - - + + T+2 L-2 M-1 I0 Θ0 N0 J0 - - - AvogadroConstant - The DBpedia definition (http://dbpedia.org/page/Avogadro_constant) is outdated as May 20, 2019. It is now an exact quantity. - The number of constituent particles, usually atoms or molecules, that are contained in the amount of substance given by one mole. - -It defines the base unit mole in the SI system. - AvogadroConstant - http://qudt.org/vocab/constant/AvogadroConstant - The number of constituent particles, usually atoms or molecules, that are contained in the amount of substance given by one mole. - -It defines the base unit mole in the SI system. - https://doi.org/10.1351/goldbook.A00543 + + PerEnergyUnit + PerEnergyUnit - - - GreenBottomAntiQuark - GreenBottomAntiQuark + + + + + VonKlitzingConstant + Resistance quantum. + The von Klitzing constant is defined as Planck constant divided by the square of the elementary charge. + VonKlitzingConstant + http://qudt.org/vocab/constant/VonKlitzingConstant + The von Klitzing constant is defined as Planck constant divided by the square of the elementary charge. - - - - AssemblyLine - A manufacturing process in which interchangeable parts are added to a product in a sequential manner to create an end product. - Is not collection, since the connection between the elements of an assembly line occurs through the flow of objects that are processed. - AssemblyLine - A manufacturing process in which interchangeable parts are added to a product in a sequential manner to create an end product. + + + + + + + + + + + ParticulateMatter + ParticulateMatter - + - - TransientLiquidPhaseSintering - TransientLiquidPhaseSintering + + HardeningByDrawing + HardeningByDrawing - - - RedBottomQuark - RedBottomQuark + + + + PressureFractionUnit + Unit for quantities of dimension one that are the fraction of two pressures. + PressureFractionUnit + Unit for quantities of dimension one that are the fraction of two pressures. - - - - - MassDefect - Sum of the product of the proton number and the hydrogen atomic mass, and the neutron rest mass, minus the rest mass of the atom. - MassDefect - https://qudt.org/vocab/quantitykind/MassDefect - https://www.wikidata.org/wiki/Q26897126 - 10-21.2 - Sum of the product of the proton number and the hydrogen atomic mass, and the neutron rest mass, minus the rest mass of the atom. + + + + Synchrotron + + Synchrotron - - - - - MeanLinearRange - Mean total rectified path length travelled by a particle in the course of slowing down to rest in a given material averaged over a group of particles having the same initial energy. - MeanLinearRange - https://qudt.org/vocab/quantitykind/MeanLinearRange - https://www.wikidata.org/wiki/Q98681589 - 10-56 - Mean total rectified path length travelled by a particle in the course of slowing down to rest in a given material averaged over a group of particles having the same initial energy. - https://doi.org/10.1351/goldbook.M03782 + + + + PhotoluminescenceMicroscopy + + Photoluminescence spectroscopy is a widely used technique for characterisation of the optical and electronic properties of semiconductors and molecules. + PhotoluminescenceMicroscopy + Photoluminescence spectroscopy is a widely used technique for characterisation of the optical and electronic properties of semiconductors and molecules. - - - - - - * - - - - Multiplication - Multiplication + + + + NuclearMagneticResonance + + Nuclear magnetic resonance spectroscopy, most commonly known as NMR spectroscopy or magnetic resonance spectroscopy (MRS), is a spectroscopic technique to observe local magnetic fields around atomic nuclei. This spectroscopy is based on the measurement of absorption of electromagnetic radiations in the radio frequency region from roughly 4 to 900 MHz. Absorption of radio waves in the presence of magnetic field is accompanied by a special type of nuclear transition, and for this reason, such type of spectroscopy is known as Nuclear Magnetic Resonance Spectroscopy. The sample is placed in a magnetic field and the NMR signal is produced by excitation of the nuclei sample with radio waves into nuclear magnetic resonance, which is detected with sensitive radio receivers. The intramolecular magnetic field around an atom in a molecule changes the resonance frequency, thus giving access to details of the electronic structure of a molecule and its individual functional groups. As the fields are unique or highly characteristic to individual compounds, in modern organic chemistry practice, NMR spectroscopy is the definitive method to identify monomolecular organic compounds. + Magnetic resonance spectroscopy (MRS) + NMR + NuclearMagneticResonance + Nuclear magnetic resonance spectroscopy, most commonly known as NMR spectroscopy or magnetic resonance spectroscopy (MRS), is a spectroscopic technique to observe local magnetic fields around atomic nuclei. This spectroscopy is based on the measurement of absorption of electromagnetic radiations in the radio frequency region from roughly 4 to 900 MHz. Absorption of radio waves in the presence of magnetic field is accompanied by a special type of nuclear transition, and for this reason, such type of spectroscopy is known as Nuclear Magnetic Resonance Spectroscopy. The sample is placed in a magnetic field and the NMR signal is produced by excitation of the nuclei sample with radio waves into nuclear magnetic resonance, which is detected with sensitive radio receivers. The intramolecular magnetic field around an atom in a molecule changes the resonance frequency, thus giving access to details of the electronic structure of a molecule and its individual functional groups. As the fields are unique or highly characteristic to individual compounds, in modern organic chemistry practice, NMR spectroscopy is the definitive method to identify monomolecular organic compounds. @@ -23235,1076 +23041,1306 @@ It defines the base unit mole in the SI system.Broadcast - - - - Gathering - Gathering - - - - - - FlameCutting - FlameCutting - - - - - - Thermogravimetry - - Thermogravimetric analysis or thermal gravimetric analysis (TGA) is a method of thermal analysis in which the mass of a sample is measured over time as the temperature changes. This measurement provides information about physical phenomena, such as phase transitions, absorption, adsorption and desorption; as well as chemical phenomena including chemisorptions, thermal decomposition, and solid-gas reactions (e.g., oxidation or reduction). - TGA - Thermogravimetry - Thermogravimetric analysis or thermal gravimetric analysis (TGA) is a method of thermal analysis in which the mass of a sample is measured over time as the temperature changes. This measurement provides information about physical phenomena, such as phase transitions, absorption, adsorption and desorption; as well as chemical phenomena including chemisorptions, thermal decomposition, and solid-gas reactions (e.g., oxidation or reduction). - - - - - - Irradiate - Irradiate - - - - - - - - - - - - - - - - - - - - - BottomAntiQuark - BottomAntiQuark - - - + - - + - - T+7 L-3 M-2 I+3 Θ0 N0 J0 + + - - CubicElectricChargeLengthPerSquareEnergyUnit - CubicElectricChargeLengthPerSquareEnergyUnit - - - - - - PlasticSintering - PlasticSintering - - - - - - HardeningByForging - HardeningByForging - - - - - - QuantumAnnihilation - A quantum annihilation is a fundamental causal system that is expressed as a complete bipartite directed graph K(m,1). - QuantumAnnihilation - A quantum annihilation is a fundamental causal system that is expressed as a complete bipartite directed graph K(m,1). - - - - - - UTF8 - UTF8 - - - - - - SparkErosion - A manufacturing process in which metallic material is anodically dissolved under the influence of an electric current and an electrolyte solution. The current flow can be caused either by connection to an external current source or due to local element formation on the workpiece (etching). - elektrochemisches Abtragen - SparkErosion + + + + EnergyFluence + In nuclear physics, incident radiant energy per cross-sectional area. + EnergyFluence + https://qudt.org/vocab/quantitykind/EnergyFluence + https://www.wikidata.org/wiki/Q98538612 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=395-01-17 + 10-46 + In nuclear physics, incident radiant energy per cross-sectional area. - + - T+3 L-3 M-1 I+2 Θ0 N-1 J0 + T-3 L+2 M+1 I-2 Θ0 N0 J0 - ElectricConductivityPerAmountUnit - ElectricConductivityPerAmountUnit + ElectricResistanceUnit + ElectricResistanceUnit - + - T+1 L0 M0 I0 Θ+1 N0 J0 + T+1 L-1 M0 I0 Θ0 N0 J0 - TemperatureTimeUnit - TemperatureTimeUnit + TimePerLengthUnit + TimePerLengthUnit - - - + + + - - - - - - + + + T-1 L0 M0 I0 Θ+1 N0 J0 + - Semiotics - Semiotics + TemperaturePerTimeUnit + TemperaturePerTimeUnit - + + + + + HalfValueThickness + Thickness of the attenuating layer that reduces the quantity of interest of a unidirectional beam of infinitesimal width to half of its initial value. + HalfValueThickness + https://qudt.org/vocab/quantitykind/Half-ValueThickness + https://www.wikidata.org/wiki/Q127526 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=881-04-34 + 10-53 + Thickness of the attenuating layer that reduces the quantity of interest of a unidirectional beam of infinitesimal width to half of its initial value. + + + + + + + + + + + + LuminousIntensity + A measure of the wavelength-weighted power emitted by a light source in a particular direction per unit solid angle. It is based on the luminosity function, which is a standardized model of the sensitivity of the human eye. + LuminousIntensity + http://qudt.org/vocab/quantitykind/LuminousIntensity + 7-14 + A measure of the wavelength-weighted power emitted by a light source in a particular direction per unit solid angle. It is based on the luminosity function, which is a standardized model of the sensitivity of the human eye. + + + + + + + MolarGibbsEnergy + Gibbs energy per amount of substance. + MolarGibbsEnergy + https://www.wikidata.org/wiki/Q88863324 + 9-6.4 + Gibbs energy per amount of substance. + + + + + GreenDownAntiQuark + GreenDownAntiQuark + + + + + + SparkPlasmaSintering + SparkPlasmaSintering + + + + + + + + + + + + + + + + + + + + + + + Deduction + IndexSemiosis + Deduction + + + + + + ElectroSinterForging + ElectroSinterForging + + + + + + DippingForms + DippingForms + + + - - + + - + + AlgebricEquation + An 'equation' that has parts two 'polynomial'-s + AlgebricEquation + 2 * a - b = c + + + + + + CentrifugalCasting + CentrifugalCasting + + + + + - - + + T-2 L+3 M+1 I-1 Θ+1 N0 J0 - Boolean - A boolean number. - Boolean - A boolean number. + NewtonSquareMetrePerAmpereUnit + NewtonSquareMetrePerAmpereUnit - - - - EnvironmentalScanningElectronMicroscopy - - The environmental scanning electron microscope (ESEM) is a scanning electron microscope (SEM) that allows for the option of collecting electron micrographs of specimens that are wet, uncoated, or both by allowing for a gaseous environment in the specimen chamber. - EnvironmentalScanningElectronMicroscopy - The environmental scanning electron microscope (ESEM) is a scanning electron microscope (SEM) that allows for the option of collecting electron micrographs of specimens that are wet, uncoated, or both by allowing for a gaseous environment in the specimen chamber. + + + + IntentionalAgent + An agent that is driven by the intention to reach a defined objective in driving a process. + Intentionality is not limited to human agents, but in general to all agents that have the capacity to decide to act in driving a process according to a motivation. + IntentionalAgent + An agent that is driven by the intention to reach a defined objective in driving a process. + Intentionality is not limited to human agents, but in general to all agents that have the capacity to decide to act in driving a process according to a motivation. - - - GluonType3 - GluonType3 + + + + MathematicalFunction + A function defined using functional notation. + A mathematical relation that relates each element in the domain (X) to exactly one element in the range (Y). + FunctionDefinition + MathematicalFunction + A function defined using functional notation. + y = f(x) - - - - XrayPowderDiffraction - - a method for analyzing the crystal structure of powdered materials by measuring the diffraction patterns produced when X-rays interact with randomly oriented crystallites within the sample - XRPD - XrayPowderDiffraction - a method for analyzing the crystal structure of powdered materials by measuring the diffraction patterns produced when X-rays interact with randomly oriented crystallites within the sample - https://en.wikipedia.org/wiki/Powder_diffraction + + + + + IsentropicCompressibility + IsentropicCompressibility + https://qudt.org/vocab/quantitykind/IsentropicCompressibility + https://www.wikidata.org/wiki/Q2990695 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-32 + 5-5.2 - - - BlueTopQuark - BlueTopQuark + + + + + + + + + + + Plus + Plus - - - - TotalCurrentDensity - Sum of electric current density and displacement current density. - TotalCurrentDensity - https://qudt.org/vocab/quantitykind/TotalCurrentDensity - https://www.wikidata.org/wiki/Q77680811 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-44 - 6-20 - Sum of electric current density and displacement current density. + + + + Namer + An interpreter who assigns a name to an object without any motivations related to the object characters. + Namer + An interpreter who assigns a name to an object without any motivations related to the object characters. - + - - DampingCoefficient - Inverse of the time constant of an exponentially varying quantity. - DampingCoefficient - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=103-05-24 - 3-24 - Inverse of the time constant of an exponentially varying quantity. + + + DebyeAngularFrequency + Cut-off angular frequency in the Debye model of the vibrational spectrum of a solid. + DebyeAngularFrequency + https://qudt.org/vocab/quantitykind/DebyeAngularFrequency + https://www.wikidata.org/wiki/Q105580986 + 12-10 + Cut-off angular frequency in the Debye model of the vibrational spectrum of a solid. - - - - + + + - - T-2 L+3 M-1 I0 Θ0 N0 J0 + + - - NewtonianConstantOfGravityUnit - NewtonianConstantOfGravityUnit + + + + Permeance + Inverse of the reluctance. + Permeance + https://qudt.org/vocab/quantitykind/Permeance + https://www.wikidata.org/wiki/Q77997985 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-29 + 6-40 + Inverse of the reluctance. - + + + ElectronAntiNeutrino + ElectronAntiNeutrino + + + - + - ThermalResistance - The name “thermal resistance” and the symbol R are used in building technology to designate thermal insulance. - Thermodynamic temperature difference divided by heat flow rate. - ThermalResistance - https://qudt.org/vocab/quantitykind/ThermalResistance - https://www.wikidata.org/wiki/Q899628 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-45 - 5-12 - Thermodynamic temperature difference divided by heat flow rate. + SpecificEntropy + SpecificEntropy + https://qudt.org/vocab/quantitykind/SpecificEntropy + https://www.wikidata.org/wiki/Q69423705 + 5-19 - + + + + + + + + + + + + + + WeakBoson + WeakBoson + + + + + + Electroplating + Electroplating + + + - T-6 L+4 M+2 I-2 Θ0 N0 J0 + T-4 L+3 M+1 I-2 Θ0 N0 J0 - LorenzNumberUnit - LorenzNumberUnit + InversePermittivityUnit + InversePermittivityUnit - - - - PhysicalLaw - A law that provides a connection between a property of the object and other properties, capturing a fundamental physical phenomena. - PhysicalLaw - A law that provides a connection between a property of the object and other properties, capturing a fundamental physical phenomena. + + + + Organisation + An holistic system of people that has its own functions with responsibilities, authorities and relationships to achieve its objectives. + ISO 55000:2014 +organization: person or group of people that has its own functions with responsibilities, authorities and relationships to achieve its objectives + Organisation + An holistic system of people that has its own functions with responsibilities, authorities and relationships to achieve its objectives. - - + + + + BlowMolding + BlowMolding + + + + + + ShellScript + A command language designed to be run by a command-line interpreter, like a Unix shell. + ShellScript + A command language designed to be run by a command-line interpreter, like a Unix shell. + https://en.wikipedia.org/wiki/Shell_script + + + + - T-6 L-2 M+2 I0 Θ0 N0 J0 + T0 L0 M+1 I0 Θ0 N+1 J0 - SquarePressurePerSquareTimeUnit - SquarePressurePerSquareTimeUnit + MassAmountOfSubstanceUnit + MassAmountOfSubstanceUnit - + - - Δ + + - - Laplacian - Laplacian - - - - - - PressureFractionUnit - Unit for quantities of dimension one that are the fraction of two pressures. - PressureFractionUnit - Unit for quantities of dimension one that are the fraction of two pressures. - - - - - - FormingFromGas - FormingFromGas - - - - - - VaporDeposition - VaporDeposition + + + + + + + + Boolean + A boolean number. + Boolean + A boolean number. - - - - IterativeCoupledModelsSimulation - A chain of linked physics based model simulations solved iteratively, where equations are segregated. - IterativeCoupledModelsSimulation - A chain of linked physics based model simulations solved iteratively, where equations are segregated. + + + + Fractography + + Fractography is the study of fracture surfaces in order to determine the relation between the microstructure and the mechanism(s) of crack initiation and propagation and, eventually, the root cause of the fracture .Fractography qualitatively interprets the mechanisms of fracture that occur in a sample by microscopic examination of fracture surface morpholog. + Fractography + Fractography is the study of fracture surfaces in order to determine the relation between the microstructure and the mechanism(s) of crack initiation and propagation and, eventually, the root cause of the fracture .Fractography qualitatively interprets the mechanisms of fracture that occur in a sample by microscopic examination of fracture surface morpholog. - + - - ModulusOfAdmittance - ModulusOfAdmittance - https://qudt.org/vocab/quantitykind/ModulusOfAdmittance - https://www.wikidata.org/wiki/Q79466359 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-12-52 - 6-52.4 - - - - - WNegativeBoson - WNegativeBoson - - - - - RedUpAntiQuark - RedUpAntiQuark + + + DebyeTemperature + DebyeTemperature + https://qudt.org/vocab/quantitykind/DebyeTemperature + https://www.wikidata.org/wiki/Q3517821 + 12-11 - + - - DifferentialScanningCalorimetry + + LinearScanVoltammetry - Differential scanning calorimetry (DSC) is a thermoanalytical technique in which the difference in the amount of heat required to increase the temperature of a sample and reference is measured as a function of temperature. Both the sample and reference are maintained at nearly the same temperature throughout the experiment. Generally, the temperature program for a DSC analysis is designed such that the sample holder temperature increases linearly as a function of time. The reference sample should have a well-defined heat capacity over the range of temperatures to be scanned. Additionally, the reference sample must be stable, of high purity, and must not experience much change across the temperature scan. Typically, reference standards have been metals such as indium, tin, bismuth, and lead, but other standards such as polyethylene and fatty acids have been proposed to study polymers and organic compounds, respectively. - DSC - DifferentialScanningCalorimetry - Differential scanning calorimetry (DSC) is a thermoanalytical technique in which the difference in the amount of heat required to increase the temperature of a sample and reference is measured as a function of temperature. Both the sample and reference are maintained at nearly the same temperature throughout the experiment. Generally, the temperature program for a DSC analysis is designed such that the sample holder temperature increases linearly as a function of time. The reference sample should have a well-defined heat capacity over the range of temperatures to be scanned. Additionally, the reference sample must be stable, of high purity, and must not experience much change across the temperature scan. Typically, reference standards have been metals such as indium, tin, bismuth, and lead, but other standards such as polyethylene and fatty acids have been proposed to study polymers and organic compounds, respectively. + LSV corresponds to the first half cycle of cyclic voltammetry. + The peak current is expressed by the Randles-Ševčík equation. + The scan is usually started at a potential where no electrode reaction occurs. + Voltammetry in which the current is recorded as the electrode potential is varied linearly with time. + LSV + LinearPolarization + LinearSweepVoltammetry + LinearScanVoltammetry + https://www.wikidata.org/wiki/Q620700 + Voltammetry in which the current is recorded as the electrode potential is varied linearly with time. + https://en.wikipedia.org/wiki/Linear_sweep_voltammetry + https://doi.org/10.1515/pac-2018-0109 + + + + + + + BoltzmannConstant + A physical constant relating energy at the individual particle level with temperature. It is the gas constant R divided by the Avogadro constant. + +It defines the Kelvin unit in the SI system. + The DBpedia definition (http://dbpedia.org/page/Boltzmann_constant) is outdated as May 20, 2019. It is now an exact quantity. + BoltzmannConstant + http://qudt.org/vocab/constant/BoltzmannConstant + A physical constant relating energy at the individual particle level with temperature. It is the gas constant R divided by the Avogadro constant. + +It defines the Kelvin unit in the SI system. + https://doi.org/10.1351/goldbook.B00695 - - - - Width - Length in a given direction regarded as horizontal. - The terms breadth and width are often used by convention, as distinguished from length and from height or thickness. - Breadth - Width - https://qudt.org/vocab/quantitykind/Width - https://www.wikidata.org/wiki/Q35059 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-01-20 - 3-1.2 - Length in a given direction regarded as horizontal. + + + + C + C - - - CausalExpansion - A causal expansion is a fundamental causal system that is expressed as a complete bipartite directed graph K(m,n), when m<n. - CausalExpansion - A causal expansion is a fundamental causal system that is expressed as a complete bipartite directed graph K(m,n), when m<n. + + + + Calendering + Calendering - + - T0 L+3 M-1 I0 Θ0 N0 J0 + T-2 L+4 M+1 I0 Θ0 N0 J0 - VolumePerMassUnit - VolumePerMassUnit + EnergyAreaUnit + EnergyAreaUnit - - - - BlowMolding - BlowMolding + + + + VoltammetryAtARotatingDiskElectrode + Hydrodynamic voltammetry using a a rotating disc electrode, where the limiting current is described by the Levich equation + VoltammetryAtARotatingDiskElectrode + Hydrodynamic voltammetry using a a rotating disc electrode, where the limiting current is described by the Levich equation + https://doi.org/10.1515/pac-2018-0109 - - + + - T-1 L+1 M0 I0 Θ+1 N0 J0 + T-3 L+3 M+1 I-1 Θ0 N0 J0 - TemperatureLengthPerTimeUnit - TemperatureLengthPerTimeUnit - - - - - - PorcelainOrCeramicCasting - PorcelainOrCeramicCasting - - - - - - CeramicSintering - CeramicSintering + ElectricFluxUnit + ElectricFluxUnit - + - T0 L0 M0 I0 Θ+2 N0 J0 + T0 L-2 M0 I+1 Θ-2 N0 J0 - SquareTemperatureUnit - SquareTemperatureUnit + RichardsonConstantUnit + RichardsonConstantUnit - - - - - MolarInternalEnergy - Internal energy per amount of substance. - MolarInternalEnergy - https://www.wikidata.org/wiki/Q88523106 - 9-6.1 - Internal energy per amount of substance. + + + + Annealing + heat treatment consisting of heating and soaking at a suitable temperature, followed by cooling under conditions such that, after return to ambient temperature, the metal will be in a structural state closer to that of equilibrium + Annealing + heat treatment consisting of heating and soaking at a suitable temperature, followed by cooling under conditions such that, after return to ambient temperature, the metal will be in a structural state closer to that of equilibrium - + - - Tortuosity - Parameter for diffusion and fluid flow in porous media. - Tortuosity - https://www.wikidata.org/wiki/Q2301683 - Parameter for diffusion and fluid flow in porous media. + + + + + ThermodynamicCriticalMagneticFluxDensity + ThermodynamicCriticalMagneticFluxDensity + https://qudt.org/vocab/quantitykind/ThermodynamicCriticalMagneticFluxDensity + https://www.wikidata.org/wiki/Q106103200 + 12-36.1 - + + + + + + Δ + + + + Laplacian + Laplacian + + + - + - - SpecificVolume - inverse of the mass density ρ, thus v = 1/ρ. - MassicVolume - SpecificVolume - https://qudt.org/vocab/quantitykind/SpecificVolume - https://www.wikidata.org/wiki/Q683556 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-09 - 4-3 - inverse of the mass density ρ, thus v = 1/ρ. - https://doi.org/10.1351/goldbook.S05807 + + MolarAttenuationCoefficient + Quotient of linear attenuation coefficient µ and the amount c of the medium. + MolarAttenuationCoefficient + https://www.wikidata.org/wiki/Q98592828 + 10-51 + Quotient of linear attenuation coefficient µ and the amount c of the medium. - - - - Dust - A suspension of fine particles in the atmosphere. - Dust - A suspension of fine particles in the atmosphere. + + + + AlphaSpectrometry + Alpha spectrometry (also known as alpha(-particle) spectroscopy) is the quantitative study of the energy of alpha particles emitted by a radioactive nuclide that is an alpha emitter. As emitted alpha particles are mono-energetic (i.e. not emitted with a spectrum of energies, such as beta decay) with energies often distinct to the decay they can be used to identify which radionuclide they originated from. + AlphaSpectrometry + Alpha spectrometry (also known as alpha(-particle) spectroscopy) is the quantitative study of the energy of alpha particles emitted by a radioactive nuclide that is an alpha emitter. As emitted alpha particles are mono-energetic (i.e. not emitted with a spectrum of energies, such as beta decay) with energies often distinct to the decay they can be used to identify which radionuclide they originated from. - - - - QuantumDecay - A quantum decay is a fundamental causal system that is expressed as a complete bipartite directed graph K(1,n). - QuantumDecay - A quantum decay is a fundamental causal system that is expressed as a complete bipartite directed graph K(1,n). + + + + + + + + + + + + + + + StandaloneAtom + A standalone atom can be bonded with other atoms by intermolecular forces (i.e. dipole–dipole, London dispersion force, hydrogen bonding), since this bonds does not involve electron sharing. + An atom that does not share electrons with other atoms. + StandaloneAtom + An atom that does not share electrons with other atoms. - - - - RawSample - - RawSample + + + + Assembled + A system of independent elements that are assembled together to perform a function. + Assembled + A system of independent elements that are assembled together to perform a function. + + + + + + PhotochemicalProcesses + PhotochemicalProcesses + + + + + + + + + T0 L0 M0 I+1 Θ-1 N0 J0 + + + ElectricCurrentPerTemperatureUnit + ElectricCurrentPerTemperatureUnit + + + + + + + + + + + + + + + + + + + + + StrangeAntiQuark + StrangeAntiQuark + + + + + + GravityCasting + GravityCasting - + - T+1 L-2 M0 I0 Θ0 N0 J+1 + T+1 L-2 M0 I+1 Θ0 N0 J0 - IlluminanceTimeUnit - IlluminanceTimeUnit - - - - - - JosephsonConstant - Inverse of the magnetic flux quantum. - The DBpedia definition (http://dbpedia.org/page/Magnetic_flux_quantum) is outdated as May 20, 2019. It is now an exact quantity. - JosephsonConstant - http://qudt.org/vocab/constant/JosephsonConstant - Inverse of the magnetic flux quantum. + ElectricDisplacementFieldUnit + ElectricDisplacementFieldUnit - + - - - ElectronBackscatterDiffraction - - Electron backscatter diffraction (EBSD) is a scanning electron microscopy (SEM) technique used to study the crystallographic structure of materials. EBSD is carried out in a scanning electron microscope equipped with an EBSD detector comprising at least a phosphorescent screen, a compact lens and a low-light camera. In this configuration, the SEM incident beam hits the tilted sample. As backscattered electrons leave the sample, they interact with the crystal's periodic atomic lattice planes and diffract according to Bragg's law at various scattering angles before reaching the phosphor screen forming Kikuchi patterns (EBSPs). EBSD spatial resolution depends on many factors, including the nature of the material under study and the sample preparation. Thus, EBSPs can be indexed to provide information about the material's grain structure, grain orientation, and phase at the micro-scale. EBSD is applied for impurities and defect studies, plastic deformation, and statistical analysis for average misorientation, grain size, and crystallographic texture. EBSD can also be combined with energy-dispersive X-ray spectroscopy (EDS), cathodoluminescence (CL), and wavelength-dispersive X-ray spectroscopy (WDS) for advanced phase identification and materials discovery. - EBSD - ElectronBackscatterDiffraction - Electron backscatter diffraction (EBSD) is a scanning electron microscopy (SEM) technique used to study the crystallographic structure of materials. EBSD is carried out in a scanning electron microscope equipped with an EBSD detector comprising at least a phosphorescent screen, a compact lens and a low-light camera. In this configuration, the SEM incident beam hits the tilted sample. As backscattered electrons leave the sample, they interact with the crystal's periodic atomic lattice planes and diffract according to Bragg's law at various scattering angles before reaching the phosphor screen forming Kikuchi patterns (EBSPs). EBSD spatial resolution depends on many factors, including the nature of the material under study and the sample preparation. Thus, EBSPs can be indexed to provide information about the material's grain structure, grain orientation, and phase at the micro-scale. EBSD is applied for impurities and defect studies, plastic deformation, and statistical analysis for average misorientation, grain size, and crystallographic texture. EBSD can also be combined with energy-dispersive X-ray spectroscopy (EDS), cathodoluminescence (CL), and wavelength-dispersive X-ray spectroscopy (WDS) for advanced phase identification and materials discovery. - - - - - - ElectricCurrentAssistedSintering - ElectricCurrentAssistedSintering - - - - - - PhysicalBasedSimulationSoftware - A computational application that uses a physical model to predict the behaviour of a system, providing a identifiable analogy with the original object. - PhysicalBasedSimulationSoftware - A computational application that uses a physical model to predict the behaviour of a system, providing a identifiable analogy with the original object. + + CharacterisedSample + The sample after having been subjected to a characterization process + CharacterisedSample + The sample after having been subjected to a characterization process - + - - - ThermodynamicEfficiency - ThermalEfficiency - ThermodynamicEfficiency - https://qudt.org/vocab/quantitykind/ThermalEfficiency - https://www.wikidata.org/wiki/Q1452104 - 5-25.1 + + + SpeedOfLightInVacuum + The speed of light in vacuum. Defines the base unit metre in the SI system. + SpeedOfLightInVacuum + http://qudt.org/vocab/constant/SpeedOfLight_Vacuum + 6-35.2 + The speed of light in vacuum. Defines the base unit metre in the SI system. + https://doi.org/10.1351/goldbook.S05854 - + - - OxidationNumber - Charge number that an atom within a molecule would have if all the ligands were removed along with the electron pairs that were shared. - OxidationState - OxidationNumber - https://www.wikidata.org/wiki/Q484152 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-01-25 - https://dbpedia.org/page/Oxidation_state - Charge number that an atom within a molecule would have if all the ligands were removed along with the electron pairs that were shared. - https://en.wikipedia.org/wiki/Oxidation_state - https://doi.org/10.1351/goldbook.O04363 + + + + + + + + + ElectricFlux + Scalar quantity equal to the flux of the electric flux density D through a given directed surface S. + ElectricFlux + https://qudt.org/vocab/quantitykind/ElectricFlux + https://www.wikidata.org/wiki/Q501267 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=121-11-41 + 6-17 + Scalar quantity equal to the flux of the electric flux density D through a given directed surface S. - - - - Ruby - Ruby + + + + + + + T+1 L-3 M0 I0 Θ0 N0 J0 + + + TimePerVolumeUnit + TimePerVolumeUnit - + - T-6 L+4 M+2 I-2 Θ-2 N0 J0 + T-1 L-4 M+1 I0 Θ0 N0 J0 - SquareElectricPotentialPerSquareTemperatureUnit - SquareElectricPotentialPerSquareTemperatureUnit + MassPerQuarticLengthTimeUnit + MassPerQuarticLengthTimeUnit - - + + - - + + - - IterativeWorkflow - A workflow whose steps (iterative steps) are the repetition of the same workflow type. - IterativeWorkflow - A workflow whose steps (iterative steps) are the repetition of the same workflow type. + + DissociationConstant + ratio of the number of dissociated molecules of a specified type to the total number of dissolved molecules of this type. + DissociationConstant + https://www.wikidata.org/wiki/Q898254 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-01-10 + ratio of the number of dissociated molecules of a specified type to the total number of dissolved molecules of this type. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - GreenQuark - GreenQuark + + + + + + + + + + + Action + Physical quantity of dimension energy × time. + Action + https://qudt.org/vocab/quantitykind/Action + https://www.wikidata.org/wiki/Q846785 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-03-51 + 4-32 + Physical quantity of dimension energy × time. - + - LuminousEfficacyOf540THzRadiation - Defines the Candela base unit in the SI system. - The luminous efficacy of monochromatic radiation of frequency 540 × 10 12 Hz, K cd , is a technical constant that gives an exact numerical relationship between the purely physical characteristics of the radiant power stimulating the human eye (W) and its photobiological response defined by the luminous flux due to the spectral responsivity of a standard observer (lm) at a frequency of 540 × 10 12 hertz. - LuminousEfficacyOf540THzRadiation - The luminous efficacy of monochromatic radiation of frequency 540 × 10 12 Hz, K cd , is a technical constant that gives an exact numerical relationship between the purely physical characteristics of the radiant power stimulating the human eye (W) and its photobiological response defined by the luminous flux due to the spectral responsivity of a standard observer (lm) at a frequency of 540 × 10 12 hertz. + JosephsonConstant + Inverse of the magnetic flux quantum. + The DBpedia definition (http://dbpedia.org/page/Magnetic_flux_quantum) is outdated as May 20, 2019. It is now an exact quantity. + JosephsonConstant + http://qudt.org/vocab/constant/JosephsonConstant + Inverse of the magnetic flux quantum. - - - - - SuperconductionTransitionTemperature - Critical thermodynamic temperature of a superconductor. - SuperconductionTransitionTemperature - https://qudt.org/vocab/quantitykind/SuperconductionTransitionTemperature - https://www.wikidata.org/wiki/Q106103037 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=815-10-09 - 12-35.3 - Critical thermodynamic temperature of a superconductor. + + + + + SolidFoam + A foam of trapped gas in a solid. + SolidFoam + A foam of trapped gas in a solid. + Aerogel - - - - - BoltzmannConstant - A physical constant relating energy at the individual particle level with temperature. It is the gas constant R divided by the Avogadro constant. - -It defines the Kelvin unit in the SI system. - The DBpedia definition (http://dbpedia.org/page/Boltzmann_constant) is outdated as May 20, 2019. It is now an exact quantity. - BoltzmannConstant - http://qudt.org/vocab/constant/BoltzmannConstant - A physical constant relating energy at the individual particle level with temperature. It is the gas constant R divided by the Avogadro constant. - -It defines the Kelvin unit in the SI system. - https://doi.org/10.1351/goldbook.B00695 + + + Observer + A characteriser that declares a property for an object through the specific interaction required by the property definition. + Observer + A characteriser that declares a property for an object through the specific interaction required by the property definition. - - - - Assigned - Assigned + + + + + + + T+2 L-2 M-1 I+1 Θ0 N0 J0 + + + ElectricCurrentPerEnergyUnit + ElectricCurrentPerEnergyUnit - + - - - ResonanceEnergy - Resonance in a nuclear reaction, determined by the kinetic energy of an incident particle in the reference frame of the target particle. - ResonanceEnergy - https://qudt.org/vocab/quantitykind/ResonanceEnergy - https://www.wikidata.org/wiki/Q98165187 - 10-37.2 - Resonance in a nuclear reaction, determined by the kinetic energy of an incident particle in the reference frame of the target particle. + + + + + T-3 L0 M+1 I0 Θ-4 N0 J0 + + + MassPerCubicTimeQuarticTemperatureUnit + MassPerCubicTimeQuarticTemperatureUnit - - - - Exafs - - Extended X-ray absorption fine structure (EXAFS), along with X-ray absorption near edge structure (XANES), is a subset of X-ray absorption spectroscopy (XAS). Like other absorption spectroscopies, XAS techniques follow Beer's law. The X-ray absorption coefficient of a material as a function of energy is obtained by directing X-rays of a narrow energy range at a sample, while recording the incident and transmitted x-ray intensity, as the incident x-ray energy is incremented. -When the incident x-ray energy matches the binding energy of an electron of an atom within the sample, the number of x-rays absorbed by the sample increases dramatically, causing a drop in the transmitted x-ray intensity. This results in an absorption edge. Every element has a set of unique absorption edges corresponding to different binding energies of its electrons, giving XAS element selectivity. XAS spectra are most often collected at synchrotrons because of the high intensity of synchrotron X-ray sources allow the concentration of the absorbing element to reach as low as a few parts per million. Absorption would be undetectable if the source is too weak. Because X-rays are highly penetrating, XAS samples can be gases, solids or liquids. - Exafs - Extended X-ray absorption fine structure (EXAFS), along with X-ray absorption near edge structure (XANES), is a subset of X-ray absorption spectroscopy (XAS). Like other absorption spectroscopies, XAS techniques follow Beer's law. The X-ray absorption coefficient of a material as a function of energy is obtained by directing X-rays of a narrow energy range at a sample, while recording the incident and transmitted x-ray intensity, as the incident x-ray energy is incremented. -When the incident x-ray energy matches the binding energy of an electron of an atom within the sample, the number of x-rays absorbed by the sample increases dramatically, causing a drop in the transmitted x-ray intensity. This results in an absorption edge. Every element has a set of unique absorption edges corresponding to different binding energies of its electrons, giving XAS element selectivity. XAS spectra are most often collected at synchrotrons because of the high intensity of synchrotron X-ray sources allow the concentration of the absorbing element to reach as low as a few parts per million. Absorption would be undetectable if the source is too weak. Because X-rays are highly penetrating, XAS samples can be gases, solids or liquids. + + + WNegativeBoson + WNegativeBoson - + - - - ParticleEmissionRate - Differential quotient of N with respect to time, where N is the number of particles being emitted from an infinitesimally small volume element in the time interval of duration dt, and dt. - ParticleEmissionRate - https://www.wikidata.org/wiki/Q98153151 - 10-36 - Differential quotient of N with respect to time, where N is the number of particles being emitted from an infinitesimally small volume element in the time interval of duration dt, and dt. + + + + + + + + Vergence + In geometrical optics, vergence describes the curvature of optical wavefronts. + Vergence + http://qudt.org/vocab/quantitykind/Curvature - + + + + + + + T-1 L+1 M0 I0 Θ0 N0 J0 + + + SpeedUnit + SpeedUnit + + + - - IsothermalConversion - IsothermalConversion + + Cementing + Cementing - + - - HyperfineStructureQuantumNumber - Quantum number of an atom describing the inclination of the nuclear spin with respect to a quantization axis given by the magnetic field produced by the orbital electrons. - HyperfineStructureQuantumNumber - https://qudt.org/vocab/quantitykind/HyperfineStructureQuantumNumber - https://www.wikidata.org/wiki/Q97577449 - 10-13.8 - Quantum number of an atom describing the inclination of the nuclear spin with respect to a quantization axis given by the magnetic field produced by the orbital electrons. + + + + + T+1 L+2 M0 I0 Θ0 N0 J0 + + + AreaTimeUnit + AreaTimeUnit - - - - Foaming - Foaming + + + + Letter + Letter - + - - VolumeFractionUnit - Unit for quantities of dimension one that are the fraction of two volumes. - VolumeFractionUnit - Unit for quantities of dimension one that are the fraction of two volumes. - Unit for volume fraction. + + + + + T0 L0 M0 I0 Θ0 N-1 J0 + + + PerAmountUnit + PerAmountUnit - + + + + + + + T+1 L+2 M0 I+1 Θ0 N0 J0 + + + ElectricChargeAreaUnit + ElectricChargeAreaUnit + + + + + + InternalEnergy + A state quantity equal to the difference between the total energy of a system and the sum of the macroscopic kinetic and potential energies of the system. + ThermodynamicEnergy + InternalEnergy + http://qudt.org/vocab/quantitykind/InternalEnergy + 5.20-2 + A state quantity equal to the difference between the total energy of a system and the sum of the macroscopic kinetic and potential energies of the system. + https://doi.org/10.1351/goldbook.I03103 + + + + + + ComplexPower + Voltage phasor multiplied by complex conjugate of the current phasor. + ComplexApparentPower + ComplexPower + https://qudt.org/vocab/quantitykind/ComplexPower + https://www.wikidata.org/wiki/Q65239736 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-11-39 + 6-59 + Voltage phasor multiplied by complex conjugate of the current phasor. + + + - + - - - PlanckFunction - Ngative quotient of Gibbs energy and temperature. - PlanckFunction - https://qudt.org/vocab/quantitykind/PlanckFunction - https://www.wikidata.org/wiki/Q76364998 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-25 - 5-23 - Ngative quotient of Gibbs energy and temperature. + + GaugePressure + GaugePressure + https://www.wikidata.org/wiki/Q109594211 + 4-14.2 - - + + + + ConcreteOrPlasterPouring + ConcreteOrPlasterPouring + + + + - T-2 L+3 M+1 I-1 Θ+1 N0 J0 + T-2 L0 M+2 I0 Θ0 N0 J0 - NewtonSquareMetrePerAmpereUnit - NewtonSquareMetrePerAmpereUnit - - - - - - - MassFractionOfDryMatter - Quantity wd = 1 − wH2O, where wH2O is mass fraction of water. - MassFractionOfDryMatter - https://qudt.org/vocab/quantitykind/MassFractionOfDryMatter - https://www.wikidata.org/wiki/Q76379189 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-64 - 5-32 - Quantity wd = 1 − wH2O, where wH2O is mass fraction of water. + SquareMassPerSquareTimeUnit + SquareMassPerSquareTimeUnit - + - T+4 L-1 M-1 I+2 Θ0 N0 J0 + T-3 L0 M+1 I0 Θ0 N0 J0 - CapacitancePerLengthUnit - CapacitancePerLengthUnit + PowerDensityUnit + PowerDensityUnit + + + + + + Galvanizing + Galvanizing - - - - - - - T-1 L-1 M0 I0 Θ0 N0 J0 - - - PerLengthTimeUnit - PerLengthTimeUnit + + + + MeasurementSystemAdjustment + + Activity which has the goal of adjusting/tuning a measing instrument, without performing a measurement on a reference sample (which is a calibration). +The output of this process can be a specific measurement parameter to be used in the characteriasation measurement process. + Set of operations carried out on a measuring system so that it provides prescribed indications corresponding to given values of a quantity being measured +NOTE 1 If there is any doubt that the context in which the term is being used is that of metrology, the long form +“adjustment of a measuring system” might be used. +NOTE 2 Types of adjustment of a measuring system include zero adjustment, offset adjustment, and span adjustment +(sometimes called “gain adjustment”). +NOTE 3 Adjustment of a measuring system should not be confused with calibration, which is sometimes a prerequisite +for adjustment. +NOTE 4 After an adjustment of a measuring system, the measuring system must usually be recalibrated. + +-- International Vocabulary of Metrology(VIM) + MeasurementSystemAdjustment + Set of operations carried out on a measuring system so that it provides prescribed indications corresponding to given values of a quantity being measured +NOTE 1 If there is any doubt that the context in which the term is being used is that of metrology, the long form +“adjustment of a measuring system” might be used. +NOTE 2 Types of adjustment of a measuring system include zero adjustment, offset adjustment, and span adjustment +(sometimes called “gain adjustment”). +NOTE 3 Adjustment of a measuring system should not be confused with calibration, which is sometimes a prerequisite +for adjustment. +NOTE 4 After an adjustment of a measuring system, the measuring system must usually be recalibrated. + +-- International Vocabulary of Metrology(VIM) + Activity which has the goal of adjusting/tuning a measing instrument, without performing a measurement on a reference sample (which is a calibration). +The output of this process can be a specific measurement parameter to be used in the characteriasation measurement process. + Adjustment - + - + - + + + + + + + + + + + + + + + + + - FundamentalAntiMatterParticle - FundamentalAntiMatterParticle + Quark + The class of individuals that stand for quarks elementary particles. + Quark + The class of individuals that stand for quarks elementary particles. + https://en.wikipedia.org/wiki/Quark - + - + + TightlyCoupledModelsSimulation + A simulation in which more than one model are solved together with a coupled method. + TightlyCoupledModelsSimulation + A simulation in which more than one model are solved together with a coupled method. + Solving within the same linear system the discretised form of the pressure and momentum equation for a fluid, using the ideal gas law as material relation for connecting pressure to density. + + + + + - - - - + + + + - Replica - An icon that not only resembles the object, but also can express some of the object's functions. - Replica - An icon that not only resembles the object, but also can express some of the object's functions. - A small scale replica of a plane tested in a wind gallery shares the same functionality in terms of aerodynamic behaviour of the bigger one. - Pinocchio is a functional icon of a boy since it imitates the external behaviour without having the internal biological structure of a human being (it is made of magic wood...). + Semiotics + Semiotics - - - - - - - T+1 L0 M-1 I0 Θ0 N0 J0 - - - MechanicalMobilityUnit - MechanicalMobilityUnit + + + + Exponent + Exponent - + - T-3 L+1 M+1 I-1 Θ0 N0 J0 + T-1 L+3 M0 I0 Θ0 N-1 J0 - ElectricFieldStrengthUnit - ElectricFieldStrengthUnit + VolumePerAmountTimeUnit + VolumePerAmountTimeUnit - + + + + VaporPressureDepressionOsmometry + + Vapor pressure osmometry measures vapor pressure indirectly by measuring the change in temperature of a polymer solution on dilution by solvent vapor and is generally useful for polymers with Mn below 10,000–40,000 g/mol. When molecular weight is more than that limit, the quantity being measured becomes very small to detect. + VPO + VaporPressureDepressionOsmometry + Vapor pressure osmometry measures vapor pressure indirectly by measuring the change in temperature of a polymer solution on dilution by solvent vapor and is generally useful for polymers with Mn below 10,000–40,000 g/mol. When molecular weight is more than that limit, the quantity being measured becomes very small to detect. + + + - - RefractiveIndex - Factor by which the phase velocity of light is reduced in a medium. - RefractiveIndex - http://qudt.org/vocab/quantitykind/RefractiveIndex - https://doi.org/10.1351/goldbook.R05240 + + + SuperconductorEnergyGap + Width of the forbidden energy band in a superconductor. + SuperconductorEnergyGap + https://qudt.org/vocab/quantitykind/SuperconductorEnergyGap + https://www.wikidata.org/wiki/Q106127898 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=815-10-28 + 12-37 + Width of the forbidden energy band in a superconductor. - - - - Presses - Presses + + + AmorphousMaterial + NonCrystallineMaterial + AmorphousMaterial - + + + + AccessConditions + Describes what is needed to repeat the experiment + AccessConditions + Describes what is needed to repeat the experiment + In case of national or international facilities such as synchrotrons describe the programme that enabled you to access these. Was the access to your characterisation tool an inhouse routine or required a 3rd party service? Was the access to your sample preparation an inhouse routine or required a 3rd party service? + + + + + + ActivityOfSolvent + For a solvent in a solution, quotient of the absolute activity and that of the pure substance at the same temperature and pressure. + ActivityOfSolvent + https://www.wikidata.org/wiki/Q89486193 + 9-27.1 + For a solvent in a solution, quotient of the absolute activity and that of the pure substance at the same temperature and pressure. + + + + - T-1 L+2 M0 I0 Θ0 N0 J0 + T+3 L-2 M-1 I0 Θ0 N0 J+1 - AreaPerTimeUnit - AreaPerTimeUnit + LuminousEfficacyUnit + LuminousEfficacyUnit - - + + + - - - - - - + + + T+2 L+2 M0 I0 Θ0 N0 J0 + - CondensedMatter - The subject of condensed matter physics that deals with the macroscopic and microscopic physical properties of matter, especially the solid and liquid phases which arise from electromagnetic forces between atoms. More generally, the subject deals with "condensed" phases of matter: systems of many constituents with strong interactions between them. - CondensedMatter - The subject of condensed matter physics that deals with the macroscopic and microscopic physical properties of matter, especially the solid and liquid phases which arise from electromagnetic forces between atoms. More generally, the subject deals with "condensed" phases of matter: systems of many constituents with strong interactions between them. + AreaSquareTimeUnit + AreaSquareTimeUnit - - - + + + + StandaloneModelSimulation + A standalone simulation, where a single physics equation is solved. + StandaloneModelSimulation + A standalone simulation, where a single physics equation is solved. + + + + + ContinuumModel + A physics-based model based on a physics equation describing the behaviour of continuum volume. + ContinuumModel + A physics-based model based on a physics equation describing the behaviour of continuum volume. + + + + + + - - = + + T-2 L+2 M+1 I0 Θ-1 N-1 J0 - - - - Equals - The equals symbol. - Equals - The equals symbol. + + EntropyPerAmountUnit + EntropyPerAmountUnit - + - - BrunauerEmmettTellerMethod - A technique used to measure the specific surface area of porous materials by analyzing the adsorption of gas molecules onto the material's surface - BET - BrunauerEmmettTellerMethod - https://www.wikidata.org/wiki/Q795838 - A technique used to measure the specific surface area of porous materials by analyzing the adsorption of gas molecules onto the material's surface - https://en.wikipedia.org/wiki/BET_theory + + MercuryPorosimetry + + a method used to measure the pore size distribution and total pore volume of solid materials by infiltrating mercury into the pores under controlled pressure conditions and analyzing the amount of mercury intrusion + MercuryPorosimetry + a method used to measure the pore size distribution and total pore volume of solid materials by infiltrating mercury into the pores under controlled pressure conditions and analyzing the amount of mercury intrusion - + - T-1 L+2 M0 I0 Θ0 N-1 J0 + T+7 L-3 M-2 I+3 Θ0 N0 J0 - DiffusivityUnit - DiffusivityUnit + CubicElectricChargeLengthPerSquareEnergyUnit + CubicElectricChargeLengthPerSquareEnergyUnit - + - RedTopAntiQuark - RedTopAntiQuark + GreenCharmAntiQuark + GreenCharmAntiQuark - - - - EmpiricalSimulationSoftware - A computational application that uses an empiric equation to predict the behaviour of a system without relying on the knowledge of the actual physical phenomena occurring in the object. - EmpiricalSimulationSoftware - A computational application that uses an empiric equation to predict the behaviour of a system without relying on the knowledge of the actual physical phenomena occurring in the object. + + + + TransferMolding + TransferMolding - - - RedBottomAntiQuark - RedBottomAntiQuark + + + + MaterialRelationComputation + MaterialRelationComputation - - - - - - - - - - - - Persistence - The interest is on the 4D object as it extends in time (process) or as it persists in time (object): -- object (focus on spatial configuration) -- process (focus on temporal evolution) - -The concepts of endurant and perdurant implicitly rely on the concept of instantaneous 3D snapshot of the world object, that in the EMMO is not allowed since everything extends in 4D and there are no abstract objects. Moreover, time is a measured property in the EMMO and not an objective characteristic of an object, and cannot be used as temporal index to identify endurant position in time. - -For this reason an individual in the EMMO can always be classified both endurant and perdurant, due to its nature of 4D entity (e.g. an individual may belong both to the class of runners and the class of running process), and the distinction is purely semantic. In fact, the object/process distinction is simply a matter of convenience in a 4D approach since a temporal extension is always the case, and stationarity depends upon observer time scale. For this reason, the same individual (4D object) may play the role of a process or of an object class depending on the object to which it relates. - -Nevertheless, it is useful to introduce categorizations that characterize persistency through continuant and occurrent concepts, even if not ontologically but only cognitively defined. This is also due to the fact that our language distinguish between nouns and verbs to address things, forcing the separation between things that happens and things that persist. + + + + ElectricReactance + The imaginary part of the impedance. + The opposition of a circuit element to a change in current or voltage, due to that element's inductance or capacitance. + Reactance + ElectricReactance + http://qudt.org/vocab/quantitykind/Reactance + https://www.wikidata.org/wiki/Q193972 + 6-51.3 + The imaginary part of the impedance. + https://en.wikipedia.org/wiki/Electrical_reactance + https://doi.org/10.1351/goldbook.R05162 + -This perspective provides classes conceptually similar to the concepts of endurant and perdurant (a.k.a. continuant and occurrent). We claim that this distinction is motivated by our cognitive bias, and we do not commit to the fact that both these kinds of entity “do really exist”. For this reason, a whole instance can be both process and object, according to different cognitive approaches (see Wonderweb D17). + + + + Gathering + Gathering + -The distinction between endurant and perdurant as usually introduced in literature (see BFO SPAN/SNAP approach) is then no more ontological, but can still be expressed through the introduction of ad hoc primitive definitions that follow the interpreter endurantist or perdurantist attitude. - The union of the object or process classes. - Persistence - The union of the object or process classes. + + + + FiberReinforcePlasticManufacturing + FiberReinforcePlasticManufacturing @@ -24313,203 +24349,202 @@ The distinction between endurant and perdurant as usually introduced in literatu MultiParticlePath - - - - - - - 1 - - + + + RedTopQuark + RedTopQuark + + + + + + Assigned + Assigned + + + + - - - 2 + + - Neutron - An uncharged subatomic particle found in the atomic nucleus. - Neutron - An uncharged subatomic particle found in the atomic nucleus. - https://en.wikipedia.org/wiki/Neutron + + ChemicalPotential + Energy per unit change in amount of substance. + ChemicalPotential + http://qudt.org/vocab/quantitykind/ChemicalPotential + 9-17 + https://doi.org/10.1351/goldbook.C01032 - - - - RamanSpectroscopy - - Raman spectroscopy (/ˈrɑːmən/) (named after physicist C. V. Raman) is a spectroscopic technique typically used to determine vibrational modes of molecules, although rotational and other low-frequency modes of systems may also be observed. Raman spectroscopy is commonly used in chemistry to provide a structural fingerprint by which molecules can be identified. - -Raman spectroscopy relies upon inelastic scattering of photons, known as Raman scattering. A source of monochromatic light, usually from a laser in the visible, near infrared, or near ultraviolet range is used, although X-rays can also be used. The laser light interacts with molecular vibrations, phonons or other excitations in the system, resulting in the energy of the laser photons being shifted up or down. The shift in energy gives information about the vibrational modes in the system. Infrared spectroscopy typically yields similar yet complementary information. + + + CeramicMaterial + CeramicMaterial + -Typically, a sample is illuminated with a laser beam. Electromagnetic radiation from the illuminated spot is collected with a lens and sent through a monochromator. Elastic scattered radiation at the wavelength corresponding to the laser line (Rayleigh scattering) is filtered out by either a notch filter, edge pass filter, or a band pass filter, while the rest of the collected light is dispersed onto a detector. - RamanSpectroscopy - Raman spectroscopy (/ˈrɑːmən/) (named after physicist C. V. Raman) is a spectroscopic technique typically used to determine vibrational modes of molecules, although rotational and other low-frequency modes of systems may also be observed. Raman spectroscopy is commonly used in chemistry to provide a structural fingerprint by which molecules can be identified. + + + + RefractiveIndex + Factor by which the phase velocity of light is reduced in a medium. + RefractiveIndex + http://qudt.org/vocab/quantitykind/RefractiveIndex + https://doi.org/10.1351/goldbook.R05240 + -Raman spectroscopy relies upon inelastic scattering of photons, known as Raman scattering. A source of monochromatic light, usually from a laser in the visible, near infrared, or near ultraviolet range is used, although X-rays can also be used. The laser light interacts with molecular vibrations, phonons or other excitations in the system, resulting in the energy of the laser photons being shifted up or down. The shift in energy gives information about the vibrational modes in the system. Infrared spectroscopy typically yields similar yet complementary information. + + + + Dielectrometry + Electrochemical measurement principle based on the measurement of the dielectric constant of a sample resulting from the orientation of particles (molecules or ions) that have a dipole moment in an electric field. Dielectrometric titrations use dielectrometry for the end-point detection. The method is used to monitor the purity of dielectrics, for example to detect small amounts of moisture. + Dielectrometry + Electrochemical measurement principle based on the measurement of the dielectric constant of a sample resulting from the orientation of particles (molecules or ions) that have a dipole moment in an electric field. Dielectrometric titrations use dielectrometry for the end-point detection. The method is used to monitor the purity of dielectrics, for example to detect small amounts of moisture. + https://doi.org/10.1515/pac-2018-0109 + -Typically, a sample is illuminated with a laser beam. Electromagnetic radiation from the illuminated spot is collected with a lens and sent through a monochromator. Elastic scattered radiation at the wavelength corresponding to the laser line (Rayleigh scattering) is filtered out by either a notch filter, edge pass filter, or a band pass filter, while the rest of the collected light is dispersed onto a detector. + + + MesoscopicSubstance + MesoscopicSubstance - - + + - T0 L+5 M0 I0 Θ0 N0 J0 + T0 L+1 M0 I0 Θ-1 N0 J0 - SectionAreaIntegralUnit - SectionAreaIntegralUnit + LengthPerTemperatureUnit + LengthPerTemperatureUnit - - - - - NuclearPrecessionAngularFrequency - Frequency by which the nucleus angular momentum vector precesses about the axis of an external magnetic field. - NuclearPrecessionAngularFrequency - https://www.wikidata.org/wiki/Q97641779 - 10-15.3 - Frequency by which the nucleus angular momentum vector precesses about the axis of an external magnetic field. + + + MuonNeutrino + A neutrino belonging to the second generation of leptons. + MuonNeutrino + A neutrino belonging to the second generation of leptons. + https://en.wikipedia.org/wiki/Muon_neutrino - + + + GreenTopQuark + GreenTopQuark + + + + + + ConfocalMicroscopy + Confocal microscopy, most frequently confocal laser scanning microscopy (CLSM) or laser scanning confocal microscopy (LSCM), is an optical imaging technique for increasing optical resolution and contrast of a micrograph by means of using a spatial pinhole to block out-of-focus light in image formation. + ConfocalMicroscopy + Confocal microscopy, most frequently confocal laser scanning microscopy (CLSM) or laser scanning confocal microscopy (LSCM), is an optical imaging technique for increasing optical resolution and contrast of a micrograph by means of using a spatial pinhole to block out-of-focus light in image formation. + + + + + + PhysicalBasedSimulationSoftware + A computational application that uses a physical model to predict the behaviour of a system, providing a identifiable analogy with the original object. + PhysicalBasedSimulationSoftware + A computational application that uses a physical model to predict the behaviour of a system, providing a identifiable analogy with the original object. + + + - T0 L+2 M0 I0 Θ0 N-1 J0 + T+2 L-3 M-1 I0 Θ0 N+1 J0 - AreaPerAmountUnit - AreaPerAmountUnit + AmountSquareTimePerMassVolumeUnit + AmountSquareTimePerMassVolumeUnit - + - GreenTopAntiQuark - GreenTopAntiQuark - - - - - - Fork - A tessellation in wich a tile has next two or more non spatially connected tiles. - Fork - A tessellation in wich a tile has next two or more non spatially connected tiles. - - - - - - FORTRAN - FORTRAN - - - - - - CharacterisationComponent - - CharacterisationComponent + RedBottomQuark + RedBottomQuark - + - T0 L-3 M0 I+1 Θ0 N-1 J0 + T-6 L+4 M+2 I-2 Θ-2 N0 J0 - ElectricCurrentPerAmountVolumeUnit - ElectricCurrentPerAmountVolumeUnit - - - - - - LengthFractionUnit - Unit for quantities of dimension one that are the fraction of two lengths. - LengthFractionUnit - Unit for quantities of dimension one that are the fraction of two lengths. - Unit for plane angle. - - - - - - - Moulding - Free forming is pressure forming with tools that do not or only partially contain the shape of the workpiece and move against each other (from: DIN 8583 Part 3/05.70). - Gesenkformen - Moulding - - - - - - ElectrolyticDeposition - ElectrolyticDeposition - - - - - - UltrasonicTesting - Ultrasonic testing (UT) is a family of non-destructive testing techniques based on the propagation of ultrasonic waves in the object or material tested. In most common UT applications, very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz, and occasionally up to 50 MHz, are transmitted into materials to detect internal flaws or to characterize materials. A common example is ultrasonic thickness measurement, which tests the thickness of the test object, for example, to monitor pipework corrosion. Ultrasonic testing is often performed on steel and other metals and alloys, though it can also be used on concrete, wood and composites, albeit with less resolution. It is used in many industries including steel and aluminium construction, metallurgy, manufacturing, aerospace, automotive and other transportation sectors. - UltrasonicTesting - Ultrasonic testing (UT) is a family of non-destructive testing techniques based on the propagation of ultrasonic waves in the object or material tested. In most common UT applications, very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz, and occasionally up to 50 MHz, are transmitted into materials to detect internal flaws or to characterize materials. A common example is ultrasonic thickness measurement, which tests the thickness of the test object, for example, to monitor pipework corrosion. Ultrasonic testing is often performed on steel and other metals and alloys, though it can also be used on concrete, wood and composites, albeit with less resolution. It is used in many industries including steel and aluminium construction, metallurgy, manufacturing, aerospace, automotive and other transportation sectors. - - - - - - LevelOfExpertise - - Describes the level of expertise required to carry out a process (the entire test or the data processing). - LevelOfExpertise - Describes the level of expertise required to carry out a process (the entire test or the data processing). + SquareElectricPotentialPerSquareTemperatureUnit + SquareElectricPotentialPerSquareTemperatureUnit - + - - DieCasting - DieCasting + + + Extrusion + Extrusion - + - + - - + + + + + + + + + + + + + + + + + + + + + + + RedAntiQuark + RedAntiQuark + + + + - + - + - + @@ -24517,297 +24552,191 @@ Typically, a sample is illuminated with a laser beam. Electromagnetic radiation - - - - - - - - - - - - FundamentalFermion - A particle with half odd integer spin (1/2, 3/2, etc...) that follows Fermi-Dirac statistics. - FundamentalFermion - A particle with half odd integer spin (1/2, 3/2, etc...) that follows Fermi-Dirac statistics. - https://en.wikipedia.org/wiki/Fermion - - - - - - Synchrotron - - Synchrotron + DownAntiQuarkType + DownAntiQuarkType - - - - Factory - A building or group of buildings where goods are manufactured or assembled. - IndustrialPlant - Factory - A building or group of buildings where goods are manufactured or assembled. + + + + QuantumAnnihilation + A quantum annihilation is a fundamental causal system that is expressed as a complete bipartite directed graph K(m,1). + QuantumAnnihilation + A quantum annihilation is a fundamental causal system that is expressed as a complete bipartite directed graph K(m,1). - + - T+2 L-2 M-1 I+1 Θ0 N0 J0 + T+1 L-1 M0 I+1 Θ0 N0 J0 - ElectricCurrentPerEnergyUnit - ElectricCurrentPerEnergyUnit - - - - - - ManufacturingDevice - A device that is designed to participate to a manufacturing process. - ManufacturingDevice - A device that is designed to participate to a manufacturing process. + ElectricChargePerLengthUnit + ElectricChargePerLengthUnit - + - - - IsothermalCompressibility - IsothermalCompressibility - https://qudt.org/vocab/quantitykind/IsothermalCompressibility - https://www.wikidata.org/wiki/Q2990696 - https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=113-04-31 - 5-5.1 - - - - - - - PhysicsMathematicalComputation - A functional icon that imitates the behaviour of the object through mathematical evaluations of some mathematical construct. - The equation that describes the velocity of a uniform accelerated body v = v0 + a*t is a functional icon. In general every analitical solution of a mathematical model can be considered an icon. A functional icon expresses its similarity with the object when is part of a process the makes it imitate the behavior of the object. In the case of v = v0 + a*t, plotting the velocity over time or listing their values at certain instants is when the icon expresses it functionality. - PhysicsMathematicalComputation - A functional icon that imitates the behaviour of the object through mathematical evaluations of some mathematical construct. - The equation that describes the velocity of a uniform accelerated body v = v0 + a*t is a functional icon. In general every analitical solution of a mathematical model can be considered an icon. A functional icon expresses its similarity with the object when is part of a process the makes it imitate the behavior of the object. In the case of v = v0 + a*t, plotting the velocity over time or listing their values at certain instants is when the icon expresses it functionality. - - - - - - ThermomechanicalTreatment - ThermomechanicalTreatment - - - - - - Letter - Letter - - - - - - - - - - - - - GasMixture - GasMixture - - - - - T-3 L+3 M+1 I-1 Θ0 N0 J0 + T+3 L-3 M-1 I+2 Θ0 N-1 J0 - ElectricFluxUnit - ElectricFluxUnit - - - - - GreenStrangeAntiQuark - GreenStrangeAntiQuark + ElectricConductivityPerAmountUnit + ElectricConductivityPerAmountUnit - + - GluonType8 - GluonType8 + GreenDownQuark + GreenDownQuark - - - - NaturalMaterial - A Material occurring in nature, without the need of human intervention. - NaturalMaterial - A Material occurring in nature, without the need of human intervention. + + + + AqueousSolution + A liquid solution in which the solvent is water. + AqueousSolution + A liquid solution in which the solvent is water. - - - - - HardwareManufacturer - - HardwareManufacturer + + + + LaserCutting + LaserCutting - - - PolymericMaterial - PolymericMaterial + + + + SpeedFractionUnit + Unit for quantities of dimension one that are the fraction of two speeds. + SpeedFractionUnit + Unit for quantities of dimension one that are the fraction of two speeds. + Unit for refractive index. - + - T+2 L0 M+1 I0 Θ0 N0 J0 + T-2 L+3 M0 I0 Θ0 N0 J0 - MassSquareTimeUnit - MassSquareTimeUnit - - - - - - - - - - - - - ParticulateMatter - ParticulateMatter + VolumePerSquareTimeUnit + VolumePerSquareTimeUnit - - - - DifferentialRefractiveIndex - - DifferentialRefractiveIndex + + + + NonActivePower + For a two-terminal element or a two-terminal circuit under periodic conditions, quantity equal to the square root of the difference of the squares of the apparent power S and the active power P. + NonActivePower + https://qudt.org/vocab/quantitykind/NonActivePower + https://www.wikidata.org/wiki/Q79813060 + https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=131-11-43 + 6-61 + For a two-terminal element or a two-terminal circuit under periodic conditions, quantity equal to the square root of the difference of the squares of the apparent power S and the active power P. - - - - NaturalProcess - A process occurring by natural (non-intentional) laws. - NonIntentionalProcess - NaturalProcess - A process occurring by natural (non-intentional) laws. + + + + + + + T-1 L+1 M0 I0 Θ+1 N0 J0 + + + TemperatureLengthPerTimeUnit + TemperatureLengthPerTimeUnit - + - - MicrocanonicalPartitionFunction - MicrocanonicalPartitionFunction - https://qudt.org/vocab/quantitykind/MicroCanonicalPartitionFunction - https://www.wikidata.org/wiki/Q96106546 - 9-35.1 - - - - - - - - - - - - - - - - - - - - - TopAntiQuark - TopAntiQuark + + MaximumEfficiency + Efficiency of an ideal heat engine operating according to the Carnot process. + CarnotEfficiency + MaximumEfficiency + https://www.wikidata.org/wiki/Q93949862 + 5-25.2 + Efficiency of an ideal heat engine operating according to the Carnot process. - - - - MarkupLanguage - A grammar for annotating a document in a way that is syntactically distinguishable from the text. - MarkupLanguage - A grammar for annotating a document in a way that is syntactically distinguishable from the text. - HTML - https://en.wikipedia.org/wiki/Markup_language + + + + DrawForms + DrawForms - + - T0 L+6 M0 I0 Θ0 N0 J0 + T-3 L-2 M+2 I0 Θ0 N0 J0 - SexticLengthUnit - SexticLengthUnit + SquarePressureTimeUnit + SquarePressureTimeUnit - - - - MaterialRelationComputation - MaterialRelationComputation + + + + + + + T+1 L+2 M0 I0 Θ+1 N0 J0 + + + AreaTimeTemperatureUnit + AreaTimeTemperatureUnit - - - - PermanentLiquidPhaseSintering - PermanentLiquidPhaseSintering + + + + + + + T-1 L-3 M0 I0 Θ0 N+1 J0 + + + AmountPerVolumeTimeUnit + AmountPerVolumeTimeUnit - + - Gerhard Goldbeck + Pierluigi Del Nostro - Gerhard Goldbeck - Gerhard Goldbeck + Pierluigi Del Nostro + Pierluigi Del Nostro - + - Pierluigi Del Nostro + Gerhard Goldbeck - Pierluigi Del Nostro - Pierluigi Del Nostro + Gerhard Goldbeck + Gerhard Goldbeck @@ -24849,39 +24778,109 @@ Typically, a sample is illuminated with a laser beam. Electromagnetic radiation Indicate a resource that might provide additional information about the subject resource. - + + + + + + + + + + + hasJunctionTile + A relation between the whole and one of its tiles, where the tile is both spatially and temporally connected with the other tiles forming the tessellation. + hasJunctionTile + A relation between the whole and one of its tiles, where the tile is both spatially and temporally connected with the other tiles forming the tessellation. + + + + + + + + + + hasSpatioTemporalTile + This owl:ObjectProperty is, like its super property, a mere collector of direct parthoods that manifest a spatiotemporal meaningful shape. + A tile that is connected with other tiles with bi-directional causal relations that fall under hasNext (or its inverse) or hasContact. + hasWellFormedTile + hasSpatioTemporalTile + A tile that is connected with other tiles with bi-directional causal relations that fall under hasNext (or its inverse) or hasContact. + This owl:ObjectProperty is, like its super property, a mere collector of direct parthoods that manifest a spatiotemporal meaningful shape. + + + - - isTemporallyBefore - isTemporallyBefore + + + + isProperPartOf + The inverse relation for hasProperPart. + isProperPartOf + The inverse relation for hasProperPart. + + + + + + + + + hasProperPart + The relation between an entity and one of its parts, when both entities are distinct. + hasProperPart + The relation between an entity and one of its parts, when both entities are distinct. + + + + + + + + + hasItemPart + A proper part relation with range restricted to items. + hasItemPart + A proper part relation with range restricted to items. + + + + + + + + hasScatteredPart + A proper part relation with range restricted to collections. + hasScatteredPart + A proper part relation with range restricted to collections. - + - - - - hasProperPart - The relation between an entity and one of its parts, when both entities are distinct. - hasProperPart - The relation between an entity and one of its parts, when both entities are distinct. + + + hasEndTile + The relation between the whole and a temporal tile that has only ingoing temporal connections. + hasTemporalLast + hasEndTile + The relation between the whole and a temporal tile that has only ingoing temporal connections. - + + - - - - - - - hasPortionPart - A proper part relation with domain restricted to items. - hasPortionPart - A proper part relation with domain restricted to items. + + + + hasTemporalTile + A relation that establishes for the whole a univocal tessellation in temporal parts forming the tessellation. + hasTemporalDirectPart + hasTemporalTile + A relation that establishes for the whole a univocal tessellation in temporal parts forming the tessellation. @@ -24896,41 +24895,19 @@ Typically, a sample is illuminated with a laser beam. Electromagnetic radiation A proper part relation with domain restricted to collections. - - - - - - - hasJunctionTile - A relation between the whole and one of its tiles, where the tile is both spatially and temporally connected with the other tiles forming the tessellation. - hasJunctionTile - A relation between the whole and one of its tiles, where the tile is both spatially and temporally connected with the other tiles forming the tessellation. - - - - - - - - hasScatteredPart - A proper part relation with range restricted to collections. - hasScatteredPart - A proper part relation with range restricted to collections. - + - + + - - - - - isPredecessorOf - A causal relation between the y effected and the x causing entities with intermediaries, where x isCauseOf y and not(y isCauseOf x). - isAntecedentOf - isPredecessorOf - A causal relation between the y effected and the x causing entities with intermediaries, where x isCauseOf y and not(y isCauseOf x). + + + + + hasNumericalPart + Relates a quantity to its numerical value through spatial direct parthood. + hasNumericalPart @@ -24946,44 +24923,6 @@ Typically, a sample is illuminated with a laser beam. Electromagnetic radiation A relation between the whole and one of its tiles, where the tile is only spatially connected with the other tiles forming the tessellation. - - - - - - - - hasSpatioTemporalTile - This owl:ObjectProperty is, like its super property, a mere collector of direct parthoods that manifest a spatiotemporal meaningful shape. - A tile that is connected with other tiles with bi-directional causal relations that fall under hasNext (or its inverse) or hasContact. - hasWellFormedTile - hasSpatioTemporalTile - A tile that is connected with other tiles with bi-directional causal relations that fall under hasNext (or its inverse) or hasContact. - This owl:ObjectProperty is, like its super property, a mere collector of direct parthoods that manifest a spatiotemporal meaningful shape. - - - - - - - - - - hasDirectPart - Direct parthood is the non transitive version of parthood enabling the establishment of hierarchy of granularities, starting with an entity and providing several tesselation levels according to specific criteria. -The criteria are implemented in specialised versions of the direct parthood relation (e.g., metrological direct part, XML format direct part). -The direct parts (tiles) and the tessellated entity (tessellation) are causally self connected (i.e., items), coherently with the concept behind the definition of the reductionistic perspective. - The relation grouping all direct parthood relations used in the reductionistic perspective. - This relation is not antitransitive, to enable partitioning of a causal structure with more than one tiling scheme (e.g. time and space partitioning). - hasDirectPart - Direct parthood is the non transitive version of parthood enabling the establishment of hierarchy of granularities, starting with an entity and providing several tesselation levels according to specific criteria. -The criteria are implemented in specialised versions of the direct parthood relation (e.g., metrological direct part, XML format direct part). -The direct parts (tiles) and the tessellated entity (tessellation) are causally self connected (i.e., items), coherently with the concept behind the definition of the reductionistic perspective. - The relation grouping all direct parthood relations used in the reductionistic perspective. - This relation is a simple collector of all relations inverse functional direct parthoods that can be defined in specialised theories using reductionism. - This relation is not antitransitive, to enable partitioning of a causal structure with more than one tiling scheme (e.g. time and space partitioning). - - @@ -25016,61 +24955,6 @@ The label of this class was also changed from PhysicsDimension to PhysicalDimens hasMetrologicalReference - - - - - - - - - - - hasNumericalPart - Relates a quantity to its numerical value through spatial direct parthood. - hasNumericalPart - - - - - - - - - - isProperPartOf - The inverse relation for hasProperPart. - isProperPartOf - The inverse relation for hasProperPart. - - - - - - - - hasBeginTile - The relation between the whole and a temporal tile that has only outgoing temporal connections. - hasTemporalFirst - hasBeginTile - The relation between the whole and a temporal tile that has only outgoing temporal connections. - - - - - - - - - hasTemporalTile - A relation that establishes for the whole a univocal tessellation in temporal parts forming the tessellation. - hasTemporalDirectPart - hasTemporalTile - A relation that establishes for the whole a univocal tessellation in temporal parts forming the tessellation. - - - - @@ -25092,50 +24976,95 @@ This means that the causing entity can be in direct and optionally indirect caus This relation is asymmetric and irreflexive. - - - + + - - - - hasMember - The relation between a collection and one of its item members. - hasMember - The relation between a collection and one of its item members. + + isTemporallyBefore + isTemporallyBefore - + + - - hasEndTile - The relation between the whole and a temporal tile that has only ingoing temporal connections. - hasTemporalLast - hasEndTile - The relation between the whole and a temporal tile that has only ingoing temporal connections. + + + hasDirectPart + Direct parthood is the non transitive version of parthood enabling the establishment of hierarchy of granularities, starting with an entity and providing several tesselation levels according to specific criteria. +The criteria are implemented in specialised versions of the direct parthood relation (e.g., metrological direct part, XML format direct part). +The direct parts (tiles) and the tessellated entity (tessellation) are causally self connected (i.e., items), coherently with the concept behind the definition of the reductionistic perspective. + The relation grouping all direct parthood relations used in the reductionistic perspective. + This relation is not antitransitive, to enable partitioning of a causal structure with more than one tiling scheme (e.g. time and space partitioning). + hasDirectPart + Direct parthood is the non transitive version of parthood enabling the establishment of hierarchy of granularities, starting with an entity and providing several tesselation levels according to specific criteria. +The criteria are implemented in specialised versions of the direct parthood relation (e.g., metrological direct part, XML format direct part). +The direct parts (tiles) and the tessellated entity (tessellation) are causally self connected (i.e., items), coherently with the concept behind the definition of the reductionistic perspective. + The relation grouping all direct parthood relations used in the reductionistic perspective. + This relation is a simple collector of all relations inverse functional direct parthoods that can be defined in specialised theories using reductionism. + This relation is not antitransitive, to enable partitioning of a causal structure with more than one tiling scheme (e.g. time and space partitioning). - + + - + - - hasItemPart - A proper part relation with range restricted to items. - hasItemPart - A proper part relation with range restricted to items. + + + hasPortionPart + A proper part relation with domain restricted to items. + hasPortionPart + A proper part relation with domain restricted to items. + + + + + + + + + + isPredecessorOf + A causal relation between the y effected and the x causing entities with intermediaries, where x isCauseOf y and not(y isCauseOf x). + isAntecedentOf + isPredecessorOf + A causal relation between the y effected and the x causing entities with intermediaries, where x isCauseOf y and not(y isCauseOf x). + + + + + + + + + hasMember + The relation between a collection and one of its item members. + hasMember + The relation between a collection and one of its item members. + + + + + + + + hasBeginTile + The relation between the whole and a temporal tile that has only outgoing temporal connections. + hasTemporalFirst + hasBeginTile + The relation between the whole and a temporal tile that has only outgoing temporal connections. - 1 + 1 - 1 + 4 @@ -25147,15 +25076,15 @@ This means that the causing entity can be in direct and optionally indirect caus - 1 + 1 - 3 + 1 - 1 + 1 @@ -25167,7 +25096,7 @@ This means that the causing entity can be in direct and optionally indirect caus - 2 + 1 @@ -25175,11 +25104,11 @@ This means that the causing entity can be in direct and optionally indirect caus - 1 + 3 - 1 + 2 @@ -25191,7 +25120,7 @@ This means that the causing entity can be in direct and optionally indirect caus - 4 + 1 @@ -25201,131 +25130,134 @@ This means that the causing entity can be in direct and optionally indirect caus - + - + + + + + + + + + + + - - - - - - - - - - - - Enforcing a strict one-way causality direction. - - - - - - - - - - - - - - - - - + - Ensure that the hasNext relation expresses a strictly one-way causality arrow between two entities. - - - - Data - From Latin data, nominative plural of datum (“that is given”), neuter past participle of dō (“I give”). - + + + + + + + + + + + + + + - - - Index - From Latin index (“a discoverer, informer, spy; of things, an indicator, the forefinger, a title, superscription”), from indicō (“point out, show”). + + + ISO 23704-1:2022(en), 3.1.2 + process of joining materials to make parts from 3D model data, usually layer upon layer, as opposed to subtractive manufacturing (3.1.29) and formative manufacturing methodologies, - - - ISO 14034:2016-11 - application of scientific knowledge, tools, techniques, crafts or systems in order to solve a problem or to achieve an objective which can result in a product or process + + + Tool + Old English tōl, from a Germanic base meaning ‘prepare’. - - Software - From soft +‎ -ware, by contrast with hardware (“the computer itself”). Coined by Paul Niquette in 1953. + + Existent + ex-sistere (latin): to stay (to persist through time) outside others of the same type (to be distinct from the rest). - - FundamentalBoson - 1940s: named after S.N. Bose. + + Variable + Fom Latin variabilis ("changeable"). - - http://www.linfo.org/program.html - Software is usually used as a generic term for programs. However, in its broadest sense it can refer to all information (i.e., both programs and data) in electronic form and can provide a distinction from hardware, which refers to computers or other electronic systems on which software can exist and be use. -Here we explicitly include in the definition also all the data (e.g. source code, script files) that takes part to the building of the executable, are necessary to the execution of a program or that document it for the users. + + We call "decoding" the act of recognise the variation according to a particular rule and generate another equivalent schema (e.g. in the agent's cognitive apparatus, as another form of data). +We call "interpreting" the act of providing semantic meaning to data, which is covered by the semiotic perspective. + The electronical state of the RAM of my laptop is decoded by it as ASCII characters and printed on the screen. - - Symbolic - From Ancient Greek σύμβολον (súmbolon, “a sign by which one infers something; a mark, token, badge, ticket, tally, check, a signal, watchword, outward sign”), from συμβάλλω (sumbállō, “I throw together, dash together, compare, correspond, tally, come to a conclusion”), from σύν (sún, “with, together”) + βάλλω (bállō, “I throw, put”). + + Cogniser + From Latin cognitio (“knowledge, perception, a judicial examination, trial”), from cognitus, past participle of cognoscere (“to know”), from co- (“together”) + *gnoscere, older form of noscere (“to know” - - - Icon - From Ancient Greek εἰκών (eikṓn, “likeness, image, portrait”). + + + https://www.w3.org/TR/2012/REC-owl2-syntax-20121211/#Global_Restrictions_on_Axioms_in_OWL_2_DL + Axiom not included in the theory because of OWL 2 DL global restrictions for decidability. + + + + + + ISO/TR 10809-1:2009, 0000_19 + Heat treatment process that generally produces martensite in the matrix. - - DIN 65099-5:1989-11 - Nailing is joining by hammering or pressing nails (wire pins) as auxiliary parts into the solid material. Several parts are joined by pressing them together (from: DIN 8593 part 3/09.85). + + ISO 23952:2020(en), 3.4.143 + a physical artifact, real or virtual, intended for subsequent transformation within some manufacturing operation - - - Equipment - From French équipement, from équiper ‘equip’. + + + https://en.wiktionary.org/wiki/procedure + The set of established forms or methods of an organized body for accomplishing a certain task or tasks (Wiktionary). - - DIN 65099-7:1989-11 - Strengthening by rolling is the strengthening of component surfaces by mechanically generating compressive stresses in the component surface and consolidating the material. + + ISO 4885:2018-02 + hardening of a workpiece caused by the precipitation of one or more compounds from a supersaturated solid solution + + + + + + Boson + 1940s: named after S.N. Bose. @@ -25335,38 +25267,110 @@ Here we explicitly include in the definition also all the data (e.g. source code From Latin factor, from fact- ‘done’, from the verb facere (to do). + + + + The disjoint union of the Item and Collection classes. + The union implies that world entities can only be items or collections (standing for a collection of causally disconnected items). +Disjointness means that a collection cannot be an item and viceversa, representing the fact that a world entity cannot be causally self-connected and non-self connected at the same time. + + + + + + J. M. Pingarrón et al., Terminology of electrochemical methods of analysis (IUPAC Recommendations 2019), Pure and Applied Chemistry, 4, 92, 2020, 641-694. https://doi.org/10.1515/pac-2018-0109 + historically for the analysis of metal ions, mercury ions were added to the test solution to form a mercury amalgam when reduced. Alternatively, an HMDE or MFE was used and the oxidizing agent added after amalgam formation. However, the toxicity of mercury and its compounds have all but precluded the present-day use of mercury + + - - Role - From French rôle, from obsolete French roule ‘roll’, referring originally to the roll of paper on which the actor's part was written. + + FunctionalIcon + From Latin functiō (“performance, execution”), from functus, perfect participle of fungor (“to perform, execute, discharge”). + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Transitivity for parthood. + + + + + + + + + + + + + + + + All EMMO individuals are part of the most comprehensive entity which is the universe. + + + + + + EN 10028-1:2017-07 + heat treatment consisting of heating and soaking at a suitable temperature, followed by cooling under conditions such that, after return to ambient temperature, the metal will be in a structural state closer to that of equilibrium - - - FunctionalIcon - From Latin functiō (“performance, execution”), from functus, perfect participle of fungor (“to perform, execute, discharge”). + + + DIN 8583-1:2003-09 + Forming of a solid body, whereby the plastic state is essentially brought about by uniaxial or multiaxial compressive stress. - - - - - - - 2 - - - Every collection has at least two item members, since a collection of one item is a self-connected entity (and then an item). + + + J. M. Pingarrón et al., Terminology of electrochemical methods of analysis (IUPAC Recommendations 2019), Pure and Applied Chemistry, 4, 92, 2020, 641-694. https://doi.org/10.1515/pac-2018-0109 + the time between changes in potential in step 2 is related to the concentration of analyte in the solution - - - Variable - Fom Latin variabilis ("changeable"). + + + https://www.iso.org/obp/ui/#iso:std:iso:3252:ed-5:v1:en:term:3.3.33 + ISO 3252:2019 Powder metallurgy +loose-powder sintering, gravity sintering: sintering of uncompacted powder @@ -25410,100 +25414,108 @@ Here we explicitly include in the definition also all the data (e.g. source code - - DIN 8590 Berichtigung 1:2004-02 - A manufacturing process in which metallic material is anodically dissolved under the influence of an electric current and an electrolyte solution. The current flow can be caused either by connection to an external current source or due to local element formation on the workpiece (etching). + + DIN 8587:2003-09 + Forming of a solid body, whereby the plastic state is essentially brought about by shear stress. - - Computation - From Latin con- +‎ putō (“I reckon”). + + Collection + From Latin collectio, from colligere ‘gather together’. - - - DIN 8588:2013-08 - Mechanical separation of workpieces without the formation of shapeless material, i.e. also without chips (chipless). + + + https://www.iso.org/obp/ui/#iso:std:iso-astm:tr:52906:ed-1:v1:en:term:3.9 + ISO/ASTM TR 52906:2022 Additive manufacturing +sintering: process of heating a powder metal compact to increase density and/or improve mechanical properties via solid state diffusion - - - J. M. Pingarrón et al., Terminology of electrochemical methods of analysis (IUPAC Recommendations 2019), Pure and Applied Chemistry, 4, 92, 2020, 641-694. https://doi.org/10.1515/pac-2018-0109 - Differential Pulse Voltammetry in which small potential pulses are superimposed onto a linearly varying potential. + + + DIN EN ISO 5349-2:2015-12 + Object that is processed with a machine - - - DIN 65099-7:1989-11 - (according to DIN 8200) Shot peening to generate residual compressive stresses in layers of the blasting material close to the surface in order to improve certain component properties, e.g. fatigue strength, corrosion resistance, wear resistance (from: DIN 8200:1982) + + + FundamentalBoson + 1940s: named after S.N. Bose. - - - The subject of condensed matter physics that deals with the macroscopic and microscopic physical properties of matter, especially the solid and liquid phases which arise from electromagnetic forces between atoms. More generally, the subject deals with "condensed" phases of matter: systems of many constituents with strong interactions between them. - https://en.wikipedia.org/wiki/Condensed_matter_physics + + + DIN 65099-3:1989-11 + Free forming is pressure forming with tools that do not or only partially contain the shape of the workpiece and move against each other. - - - DIN EN 9110:2018-08 - action to disassemble a product or a component by removing all or some of its constituent parts with the intent to salvage + + + Matter + From Latin materia (“matter, stuff, material”), from mater (“mother”). - - - https://en.wiktionary.org/wiki/Wiktionary - Definitions are usually taken from Wiktionary. + + + The subject of condensed matter physics that deals with the macroscopic and microscopic physical properties of matter, especially the solid and liquid phases which arise from electromagnetic forces between atoms. More generally, the subject deals with "condensed" phases of matter: systems of many constituents with strong interactions between them. + https://en.wikipedia.org/wiki/Condensed_matter_physics - - Manufacturing - From Latin manu factum ("made by hand"). + + Index + From Latin index (“a discoverer, informer, spy; of things, an indicator, the forefinger, a title, superscription”), from indicō (“point out, show”). - - DIN 65099-3:1989-11 - Free forming is pressure forming with tools that do not or only partially contain the shape of the workpiece and move against each other (from: DIN 8583 Part 3/05.70). + + https://en.wiktionary.org/wiki/workpiece + The raw material or partially finished piece that is shaped by performing various operations. - - - https://www.collinsdictionary.com/it/dizionario/inglese/technology - Technology refers to methods, systems, and devices which are the result of scientific knowledge being used for practical purposes. + + + Holistic + Holism (from Greek ὅλος holos "all, whole, entire"). - - Wholistic - From the word 'holistic' with the 'w-' prefix, due to the affinity with the existing word 'whole', that share the same meaning of 'holos'. + + Artifact + From Latin arte ‘by or using art’ + factum ‘something made’. - - - DIN 8580:2022-12 - Verfestigen durch Umformen + + + DIN 65099-7:1989-11 + (according to DIN 8200) Shot peening to generate residual compressive stresses in layers of the blasting material close to the surface in order to improve certain component properties, e.g. fatigue strength, corrosion resistance, wear resistance (from: DIN 8200:1982) + + + + + + CausalParticle + From Latin particula (“small part, particle”), diminutive of pars (“part, piece”). - - Lifetime - From Middle English liftime, equivalent to life +‎ time. + + Equipment + From French équipement, from équiper ‘equip’. @@ -25513,215 +25525,119 @@ Here we explicitly include in the definition also all the data (e.g. source code - + - - - - - + + + + - - - - - - - - - - - - Implementation of equality based on mereology. - - - - - - J. M. Pingarrón et al., Terminology of electrochemical methods of analysis (IUPAC Recommendations 2019), Pure and Applied Chemistry, 4, 92, 2020, 641-694. https://doi.org/10.1515/pac-2018-0109 - the time between changes in potential in step 2 is related to the concentration of analyte in the solution - - - - - - https://emmc.info/wp-content/uploads/2018/05/CWA_17284.pdf - CEN Workshop Agreement – CWA 17284 “Materials modelling – terminology, classification and metadata” - - - - - - Language - From Latin lingua (“tongue, speech, language”), from Old Latin dingua (“tongue”). - - - - - - ElementaryParticle - From Latin elementārius (“elementary”), from elementum (“one of the four elements of antiquity; fundamentals”). - - - - - - - - - - - - - - - - - - - - http://www.linfo.org/program.html - A program is a sequence of instructions understandable by a computer's central processing unit (CPU) that indicates which operations the computer should perform on a set of data. - - - - - - Matter - From Latin materia (“matter, stuff, material”), from mater (“mother”). - - - - - - DIN 65099-4:1989-11 - Thermal ablation is the separation of material particles in solid, liquid or gaseous state by heat processes as well as the removal of these material particles by mechanical or electromagnetic forces (from: DIN - - - - - - CausalChain - From Old French chaine, chaene (“chain”), from Latin catēna (“chain”). - - - - - - - - - - - - - - - - + + - Enforcing reflexivity of overlapping. - - - TangibleProduct - From late Latin tangibilis, from tangere ‘to touch’. + + + https://en.wiktionary.org/wiki/Wiktionary + Definitions are usually taken from Wiktionary. - - - https://www.iso.org/obp/ui/fr/#iso:std:iso-iec:2382:-1:ed-3:en - All or part of the programs, procedures, rules, and associated documentation of an information processing system. + + + Lifetime + From Middle English liftime, equivalent to life +‎ time. - - - DIN EN ISO 15156-3:2015-12 - Heat to a temperature appropriate for the particular material, maintain at that temperature and then cool at an appropriate rate to reduce hardness, improve machinability or achieve desired properties. + + + https://www.iso.org/obp/ui/#iso:std:iso:55000:ed-1:v2:en:term:3.1.13 + ISO 55000:2014 +organization: person or group of people that has its own functions with responsibilities, authorities and relationships to achieve its objectives - - Property - From Latin proprietas (“a peculiarity, one's peculiar nature or quality, right or fact of possession, property”), from proprius (“special, particular, one's own”). + + Quantum + From Latin quantum (plural quanta) "as much as, so much as". - - - A path is a string of characters used to uniquely identify a location in a directory structure according to a particular convention. - https://en.wikipedia.org/wiki/Path_(computing)#Universal_Naming_Convention + + + Data + From Latin data, nominative plural of datum (“that is given”), neuter past participle of dō (“I give”). - - - https://en.wikipedia.org/wiki/Semiotic_theory_of_Charles_Sanders_Peirce#II._Icon,_index,_symbol - In Peirce semiotics three subtypes of icon are possible: -(a) the image, which depends on a simple quality (e.g. picture) -(b) the diagram, whose internal relations, mainly dyadic or so taken, represent by analogy the relations in something (e.g. math formula, geometric flowchart) -(c) the metaphor, which represents the representative character of a sign by representing a parallelism in something else -[Wikipedia] + + + PhysicalObject + From Latin physica "study of nature" (and Ancient Greek φυσικός, “natural”), and Medieval Latin obiectum (“object”, literally “thrown against”). - - - DIN 8584-1:2003-09 - Forming of a solid body, whereby the plastic state is essentially brought about by a combined tensile and compressive stress. + + + ElementaryParticle + From Latin elementārius (“elementary”), from elementum (“one of the four elements of antiquity; fundamentals”). - - Fundamental - From Latin fundamentum (“foundation”), from fundō (“to lay the foundation (of something), to found”), from fundus (“bottom”). + + isPredecessorOf + From Latin prae ("beforehand") and decedere ("depart"). - - - In the physical sciences, a phase is a region of space (a thermodynamic system), throughout which all physical properties of a material are essentially uniform. Examples of physical properties include density, index of refraction, magnetization and chemical composition. A simple description is that a phase is a region of material that is chemically uniform, physically distinct, and (often) mechanically separable. In a system consisting of ice and water in a glass jar, the ice cubes are one phase, the water is a second phase, and the humid air is a third phase over the ice and water. The glass of the jar is another separate phase. + + + ManufacturedProduct + From Latin manufacture: "made by hand". + -The term phase is sometimes used as a synonym for state of matter, but there can be several immiscible phases of the same state of matter. Also, the term phase is sometimes used to refer to a set of equilibrium states demarcated in terms of state variables such as pressure and temperature by a phase boundary on a phase diagram. Because phase boundaries relate to changes in the organization of matter, such as a change from liquid to solid or a more subtle change from one crystal structure to another, this latter usage is similar to the use of "phase" as a synonym for state of matter. However, the state of matter and phase diagram usages are not commensurate with the formal definition given above and the intended meaning must be determined in part from the context in which the term is used. - https://en.wikipedia.org/wiki/Phase_(matter) + + + + Software + From soft +‎ -ware, by contrast with hardware (“the computer itself”). Coined by Paul Niquette in 1953. - - - measurand - VIM defines measurand as a quantity intended to be measured. This is redundant in EMMO and correspond to Quantity. + + + Property + From Latin proprietas (“a peculiarity, one's peculiar nature or quality, right or fact of possession, property”), from proprius (“special, particular, one's own”). - - - A tessellation (or tiling) is the covering of a surface, often a plane, using one or more geometric shapes, called tiles, with no overlaps and no gaps. - https://en.wikipedia.org/wiki/Tessellation + + + DIN 8584-1:2003-09 + Forming of a solid body, whereby the plastic state is essentially brought about by a combined tensile and compressive stress. @@ -25731,7 +25647,7 @@ The term phase is sometimes used as a synonym for state of matter, but there can - + @@ -25740,225 +25656,188 @@ The term phase is sometimes used as a synonym for state of matter, but there can - - - - + + + + + + Ensure that the hasNext relation expresses a strictly one-way causality arrow between two entities. - - - - - - - - - Every entity is made of quantum parts. This axiomatisation is the expression of the radical reductionistic approach of the EMMO. - - - - - - International Electrotechnical Commission (IEC), IEC 60050 - International Electrotechnical Vocabulary, retrieved from: https://www.electropedia.org - method of electroanalytical chemistry used to separate by electrolyse ions of a substance and to derive the amount of this substance from the increase in mass of an electrode. - - - - - - Part - From Latin partire, partiri ‘divide, share’. + + + DIN EN 13956:2013-03 + Joining process by softening the surfaces to be joined, either by heat or with a solvent (swelling welding, solvent welding), and pressing the softened surfaces together. - - DIN EN ISO 472/A1:2019-03 - Type of scratching behaviour where the scratching force and the (displacement) deflection of the scratching tip are constant over the scratching distance during the test. + + ISO 13574:2015-02 + Process for removing unwanted residual or waste material from a given product or material - - EN 10028-1:2017-07 - heat treatment consisting of heating and soaking at a suitable temperature, followed by cooling under conditions such that, after return to ambient temperature, the metal will be in a structural state closer to that of equilibrium + + DIN 8580:2022-12 + Manufacturing by changing the properties of the material of which a workpiece is made, which is done, among other things, by changes in the submicroscopic or atomic range, e.g. by diffusion of atoms, generation and movement of dislocations in the atomic lattice or chemical reactions, and where unavoidable changes in shape are not part of the essence of these processes. - - - DIN 8590 Berichtigung 1:2004-02 - Manufacturing by separating particles of material from a solid body by non-mechanical means. Ablation refers both to the removal of layers of material and to the separation of workpiece parts. The production process of ablation is considered in its stationary instantaneous state, independently of the application of auxiliary processes necessary to initiate the process. Ablation is divided into three subgroups according to the order point of view (OGP) "process in the effective zone on the surface of the workpiece": - thermal ablation; - chemical ablation; - electrochemical ablation. + + + Whole + From Middle English hole (“healthy, unhurt, whole”). - - - https://www.iso.org/obp/ui/#iso:std:iso:8887:-1:ed-1:v1:en:term:3.1.5 - ISO 8887-1:2017 -manufacturing: production of components + + + J. M. Pingarrón et al., Terminology of electrochemical methods of analysis (IUPAC Recommendations 2019), Pure and Applied Chemistry, 4, 92, 2020, 641-694. https://doi.org/10.1515/pac-2018-0109 + the stripping potentiogram shows staircase curves of potential as a function of time. Frequently, the first derivative is displayed (dE/dt=f(t)), as this produces peak-shaped signals. The time between transitions (peaks) is proportional to the concentration of analyte in the test solution - - DIN 65099-5:1989-11 - Screwing (screwing on, screwing in, screwing tight) is joining by pressing on by means of a self-locking thread (from: DIN 8593 Part 3/09.85). + + DIN EN ISO 472/A1:2019-03 + Type of scratching behaviour where the scratching force and the (displacement) deflection of the scratching tip are constant over the scratching distance during the test. - - - Model - From Latin modus (“measure”). + + + A variable is a symbolic object that stands for any other mathematical object, such as number, a vector, a matrix, a function, the argument of a function, a set, an element of a set. + https://en.wikipedia.org/wiki/Variable_(mathematics) - - - Dedomena - From Greek, nominative plural form of δεδομένο (dedoméno) (data, information) - + + + https://dictionary.iucr.org/Crystal + A material is a crystal if it has essentially a sharp diffraction pattern. - - - - EMMO - EMMO is the acronym of Elementary Multiperspective Material Ontology. - +A solid is a crystal if it has essentially a sharp diffraction pattern. The word essentially means that most of the intensity of the diffraction is concentrated in relatively sharp Bragg peaks, besides the always present diffuse scattering. In all cases, the positions of the diffraction peaks can be expressed by - - - - https://www.iso.org/obp/ui/#iso:std:iso:15531:-1:ed-1:v1:en:term:3.6.22 - ISO 15531-1:2004 -manufacturing: function or act of converting or transforming material from raw material or semi-finished state to a state of further completion + +H=∑ni=1hia∗i (n≥3) - - - Tool - Old English tōl, from a Germanic base meaning ‘prepare’. + + + http://www.linfo.org/program.html + A program is a sequence of instructions understandable by a computer's central processing unit (CPU) that indicates which operations the computer should perform on a set of data. - - - DIN 8584-2:2003-09 - Draw forming by drawing a workpiece through a tool opening that is narrowed in the drawing direction. + + + TangibleProduct + From late Latin tangibilis, from tangere ‘to touch’. - - https://www.iso.org/obp/ui/#iso:std:iso:15531:-1:ed-1:v1:en:term:3.6.9 - ISO 15531-1:2004 -discrete manufacturing: production of discrete items. + + https://www.iso.org/obp/ui/#iso:std:iso:18435:-1:ed-1:v1:en:term:3.16 + ISO 18435-1:2009 +manufacturing process: set of processes in manufacturing involving a flow and/or transformation of material, information, energy, control, or any other element in a manufacturing area - - - ISO 23952:2020(en), 3.4.143 - a physical artifact, real or virtual, intended for subsequent transformation within some manufacturing operation + + + Observation + From Latin observare (“to watch, note, mark, heed, guard, keep, pay attention to, regard, comply with, etc.”), from ob (“before”) + servare (“to keep”), - - DIN 8585-3:2003-09 - Widening is tensile forming to increase the circumference of a hollow body. A distinction is made between: Widening, bulging. + + DIN EN 13831:2007-12 + Forming of vessel parts from a flat mould into a three-dimensional shape by means of a press and tools, whereby material is neither removed nor added - - - - - - - - - - - - - - - All EMMO individuals are part of the most comprehensive entity which is the universe. + + + + + Particle + From Latin particula (“small part, particle”), diminutive of pars (“part, piece”). - - - DIN 8593-3:2003-09 - A collective term for the processes in which, during joining, the parts to be joined and any auxiliary parts are essentially only elastically deformed and unintentional loosening is prevented by frictional connection. + + + https://datatracker.ietf.org/doc/rfc3987/ + An Internationalized Resource Identifier (IRI) is a compact sequence of characters that identifies an abstract or physical resource. It is similar to URI, but greatly extends the allowed character set from ASCII to the Universal Character Set. - - - IntentionalProcess - From Latin intentionem, derived from intendere ("stretching out") + + + DIN 8588:2013-08 + Cutting workpieces between two cutting edges that move past each other (see Figure 1 [see figure in the standard]). - - Device - From Old French "deviser", meaning: arrange, plan, contrive. Literally "dispose in portions," from Vulgar Latin "divisare", frequentative of Latin dividere, meaning "to divide". + + isCauseOf + From Latin causa (“reason, sake, cause”). - - - :isCauseOf owl:propertyDisjointWith :overlaps - Due to the transitivity characteristic of :overlaps subclasses, that makes it a composite property. + + + https://www.iso.org/obp/ui/#iso:std:iso:3252:ed-5:v1:en:term:3.3.55 + ISO 3252:2019 Powder metallurgy +reaction sintering: process wherein at least two constituents of a powder mixture react during sintering - - J. M. Pingarrón et al., Terminology of electrochemical methods of analysis (IUPAC Recommendations 2019), Pure and Applied Chemistry, 4, 92, 2020, 641-694. https://doi.org/10.1515/pac-2018-0109 - the stripping potentiogram shows staircase curves of potential as a function of time. Frequently, the first derivative is displayed (dE/dt=f(t)), as this produces peak-shaped signals. The time between transitions (peaks) is proportional to the concentration of analyte in the test solution + + DIN 8584-2:2003-09 + Draw forming by drawing a workpiece through a tool opening that is narrowed in the drawing direction. - - - ISO 23704-1:2022(en), 3.1.2 - process of joining materials to make parts from 3D model data, usually layer upon layer, as opposed to subtractive manufacturing (3.1.29) and formative manufacturing methodologies, + + + The EMMO conceptualises the world using the primitive concepts of causality and parthood. Parthood is about the composition of world entities starting from other more fundamental entities. Causality is about the interactions between world entities. +The quantum is the smallest indivisible part of any world entity. Quantum individuals are the fundamental causal constituents of the universe, since it is implied that causality originates from quantum-to-quantum interactions. Quantums are no-dimensional, and their aggregation makes spacetime emerge from their causal structure. Causality between macro entities (i.e. entities made of more than one quantum) is explained as the sum of the causality relations between their quantum constituents. +The fundamental distinction between world entities is direct causality self-connectedness: a world entity can be self-connected xor not self-connected depending on the causality network of its fundamental components. +Void regions do not exist in the EMMO, or in other words there is no spacetime without entities, since space and time are measured quantities following a causality relation between entities (spacetime emerges as relational property not as a self-standing entity). +Entities are not placed in space or time: space and time are always relative between entities and are measured. In other words, space and time relations originates from causality interactions. + While EMMO mereocausality conceptualisation can be used on any possibile domain, so that a quantum can be a Lego brick or an furniture component, it can be better understood when a quantum is elucidated as the smallest measured time interval of existence of an elementary particle (e.g. quark, photon). - - - DIN 8583-2:2003-09 - Continuous or stepwise pressure forming with one or more rotating tools (rollers), without or with additional tools, e.g. plugs or mandrels, rods, guide tools + + + Procedure + From Latin pro-cedere (“to go forward, to proceed”). - - - https://dictionary.iucr.org/Crystal - A material is a crystal if it has essentially a sharp diffraction pattern. - -A solid is a crystal if it has essentially a sharp diffraction pattern. The word essentially means that most of the intensity of the diffraction is concentrated in relatively sharp Bragg peaks, besides the always present diffuse scattering. In all cases, the positions of the diffraction peaks can be expressed by - - -H=∑ni=1hia∗i (n≥3) + + + :isCauseOf owl:propertyDisjointWith :overlaps + Due to the transitivity characteristic of :overlaps subclasses, that makes it a composite property. - - - https://en.wiktionary.org/wiki/workpiece - The raw material or partially finished piece that is shaped by performing various operations. + + + Symbolic + From Ancient Greek σύμβολον (súmbolon, “a sign by which one infers something; a mark, token, badge, ticket, tally, check, a signal, watchword, outward sign”), from συμβάλλω (sumbállō, “I throw together, dash together, compare, correspond, tally, come to a conclusion”), from σύν (sún, “with, together”) + βάλλω (bállō, “I throw, put”). @@ -25976,7 +25855,7 @@ H=∑ni=1hia∗i (n≥3) - + @@ -25988,184 +25867,196 @@ H=∑ni=1hia∗i (n≥3) - + - - - + + - Transitivity for parthood. + Implementation of equality based on mereology. - - - The EMMO conceptualises the world using the primitive concepts of causality and parthood. Parthood is about the composition of world entities starting from other more fundamental entities. Causality is about the interactions between world entities. -The quantum is the smallest indivisible part of any world entity. Quantum individuals are the fundamental causal constituents of the universe, since it is implied that causality originates from quantum-to-quantum interactions. Quantums are no-dimensional, and their aggregation makes spacetime emerge from their causal structure. Causality between macro entities (i.e. entities made of more than one quantum) is explained as the sum of the causality relations between their quantum constituents. -The fundamental distinction between world entities is direct causality self-connectedness: a world entity can be self-connected xor not self-connected depending on the causality network of its fundamental components. -Void regions do not exist in the EMMO, or in other words there is no spacetime without entities, since space and time are measured quantities following a causality relation between entities (spacetime emerges as relational property not as a self-standing entity). -Entities are not placed in space or time: space and time are always relative between entities and are measured. In other words, space and time relations originates from causality interactions. - While EMMO mereocausality conceptualisation can be used on any possibile domain, so that a quantum can be a Lego brick or an furniture component, it can be better understood when a quantum is elucidated as the smallest measured time interval of existence of an elementary particle (e.g. quark, photon). + + + Crystal + From Ancient Greek κρύσταλλος (krústallos, “clear ice”), from κρύος (krúos, “frost”). - - DIN EN 13956:2013-03 - Joining process by softening the surfaces to be joined, either by heat or with a solvent (swelling welding, solvent welding), and pressing the softened surfaces together. + + DIN EN 12258-1:2012-08 + Removal of material by means of rigid or flexible discs or belts containing abrasives. - - - Procedure - From Latin pro-cedere (“to go forward, to proceed”). + + + A supply chain is a system of organizations, people, activities, information, and resources involved in supplying a product or service to a consumer. + https://en.wikipedia.org/wiki/Supply_chain - - - - https://www.iso.org/obp/ui/#iso:std:iso:3252:ed-5:v1:en:term:3.3.33 - ISO 3252:2019 Powder metallurgy -loose-powder sintering, gravity sintering: sintering of uncompacted powder - + + + + + + + + + + + + + + + + + + + + + + + + + Enforcing reflexivity of overlapping. + - - - J. M. Pingarrón et al., Terminology of electrochemical methods of analysis (IUPAC Recommendations 2019), Pure and Applied Chemistry, 4, 92, 2020, 641-694. https://doi.org/10.1515/pac-2018-0109. - chronopotentiometry where the applied current is changed in steps + + + DIN 65099-4:1989-11 + Thermal ablation is the separation of material particles in solid, liquid or gaseous state by heat processes as well as the removal of these material particles by mechanical or electromagnetic forces (from: DIN - - - https://en.wiktionary.org/wiki/procedure - The set of established forms or methods of an organized body for accomplishing a certain task or tasks (Wiktionary). + + + DIN EN 10210-3:2020-11 + Process consisting of two steps: - first, the steel is heated in a quenching treatment to a temperature above Ac3 and then rapidly cooled in a liquid to produce a process-specific grain structure; - subsequently, the steel is heated to a specific temperature during tempering to set the desired property and cooled in air. - - - https://de.wikipedia.org/wiki/Werkst%C3%BCck - In manufacturing, a workpiece is a single, delimited part of largely solid material that is processed in some form (e.g. stone ). + + + ElementaryParticle + From Latin elementārius (“elementary”), from elementum (“one of the four elements of antiquity; fundamentals”). - - - https://www.iso.org/standard/45324.html - A measurement is the process of experimentally obtaining one or more measurement results that can reasonably be attributed to a quantity. + + + J. M. Pingarrón et al., Terminology of electrochemical methods of analysis (IUPAC Recommendations 2019), Pure and Applied Chemistry, 4, 92, 2020, 641-694. https://doi.org/10.1515/pac-2018-0109 + Differential Pulse Voltammetry in which small potential pulses are superimposed onto a linearly varying potential. - - DIN EN 12258-1:2012-08 - Removal of material by means of rigid or flexible discs or belts containing abrasives. + + DIN 8590 Berichtigung 1:2004-02 + A manufacturing process in which metallic material is anodically dissolved under the influence of an electric current and an electrolyte solution. The current flow can be caused either by connection to an external current source or due to local element formation on the workpiece (etching). - - - DIN 8593-0:2003-09 - The permanent joining or other bringing together of two or more workpieces of a geometric shape or of similar workpieces with shapeless material. In each case, the cohesion is created locally and increased as a whole. + + + https://www.iso.org/obp/ui/#iso:std:iso:3252:ed-5:v1:en:term:3.3.60 + ISO 3252:2019 Powder metallurgy +sintering: thermal treatment of a powder or compact, at a temperature below the melting point of the main constituent, for the purpose of increasing its strength by the metallurgical bonding of its particles + + + + + + + + + + + + + + - - - J. M. Pingarrón et al., Terminology of electrochemical methods of analysis (IUPAC Recommendations 2019), Pure and Applied Chemistry, 4, 92, 2020, 641-694. https://doi.org/10.1515/pac-2018-0109 - historically for the analysis of metal ions, mercury ions were added to the test solution to form a mercury amalgam when reduced. Alternatively, an HMDE or MFE was used and the oxidizing agent added after amalgam formation. However, the toxicity of mercury and its compounds have all but precluded the present-day use of mercury + + + Engineered + From Latin ingenium "innate qualities, ability; inborn character," in Late Latin "a war engine, battering ram"; literally "that which is inborn," from in- ("in") + gignere ("give birth, beget"). - - ISO 13574:2015-02 - Process for removing unwanted residual or waste material from a given product or material - - - - - - - - - - - - - - - - - - - - - - - - - - - - Enforcing exclusivity between overlapping and causality. - + + https://www.collinsdictionary.com/it/dizionario/inglese/technology + Technology refers to methods, systems, and devices which are the result of scientific knowledge being used for practical purposes. + - - Whole - From Middle English hole (“healthy, unhurt, whole”). + + Role + From French rôle, from obsolete French roule ‘roll’, referring originally to the roll of paper on which the actor's part was written. - - - We call "decoding" the act of recognise the variation according to a particular rule and generate another equivalent schema (e.g. in the agent's cognitive apparatus, as another form of data). -We call "interpreting" the act of providing semantic meaning to data, which is covered by the semiotic perspective. - The electronical state of the RAM of my laptop is decoded by it as ASCII characters and printed on the screen. + + + J. M. Pingarrón et al., Terminology of electrochemical methods of analysis (IUPAC Recommendations 2019), Pure and Applied Chemistry, 4, 92, 2020, 641-694. https://doi.org/10.1515/pac-2018-0109 + two-step electrochemical measurement in which 1) material is accumulated at an electrode and 2) the material is removed by chemical reaction or electrochemically at constant current with measurement of electrode potential - - - https://www.iso.org/obp/ui/#iso:std:iso:3252:ed-5:v1:en:term:3.3.60 - ISO 3252:2019 Powder metallurgy -sintering: thermal treatment of a powder or compact, at a temperature below the melting point of the main constituent, for the purpose of increasing its strength by the metallurgical bonding of its particles + + + + + + + 2 + + + Every collection has at least two item members, since a collection of one item is a self-connected entity (and then an item). - - - PhysicalObject - From Latin physica "study of nature" (and Ancient Greek φυσικός, “natural”), and Medieval Latin obiectum (“object”, literally “thrown against”). + + + https://www.ietf.org/rfc/rfc3986.txt + The term "Uniform Resource Locator" (URL) refers to the subset of URIs that, in addition to identifying a resource, provide a means of locating the resource by describing its primary access mechanism (e.g., its network "location"). - - - AnalogicalIcon - From Ancient Greek ἀναλογία (analogía), from ἀνά (aná) + λόγος (lógos, “speech, reckoning”). + + + EN 16603-11:2019-11 + application of scientific knowledge, tools, techniques, crafts, systems or methods of organization in order to solve a problem or achieve an objective + + + + + + DIN 65099-7:1989-11 + Strengthening by rolling is the strengthening of component surfaces by mechanically generating compressive stresses in the component surface and consolidating the material. - - Existent - ex-sistere (latin): to stay (to persist through time) outside others of the same type (to be distinct from the rest). + + Manufacturing + From Latin manu factum ("made by hand"). - - - DIN 8586:2003-09 - Forming of a solid body, whereby the plastic state is essentially brought about by a bending stress + + + DIN EN ISO 4885:2018-07 + Treatment carried out after hardening or case hardening consisting of cooling to a temperature below room temperature to complete the transformation of austenite to martensite @@ -26175,30 +26066,19 @@ sintering: thermal treatment of a powder or compact, at a temperature below the - + - - - - - - - - - - - + - + - - + @@ -26206,24 +26086,38 @@ sintering: thermal treatment of a powder or compact, at a temperature below the - - - CausalPath - From Ancient Greek πάτος (pátos, “path”). + + + Simulacrum + From Latin simulacrum ("likeness, semblance") + + + + + + DIN 65099-3:1989-11 + Free forming is pressure forming with tools that do not or only partially contain the shape of the workpiece and move against each other (from: DIN 8583 Part 3/05.70). - - ElementaryParticle - From Latin elementārius (“elementary”), from elementum (“one of the four elements of antiquity; fundamentals”). + + DIN 8580:2022-12 + Verfestigen durch Umformen - - Collection - From Latin collectio, from colligere ‘gather together’. + + IntentionalProcess + From Latin intentionem, derived from intendere ("stretching out") + + + + + + Item + From Latin item, "likewise, just so, moreover". @@ -26233,192 +26127,196 @@ sintering: thermal treatment of a powder or compact, at a temperature below the - + - - - - - - - - - - - + - - - + + + + Enforcing a strict one-way causality direction. - - - Item - From Latin item, "likewise, just so, moreover". - - - - - - DIN EN 13831:2007-12 - Forming of vessel parts from a flat mould into a three-dimensional shape by means of a press and tools, whereby material is neither removed nor added - - - - - - https://www.iso.org/obp/ui/#iso:std:iso-astm:tr:52906:ed-1:v1:en:term:3.9 - ISO/ASTM TR 52906:2022 Additive manufacturing -sintering: process of heating a powder metal compact to increase density and/or improve mechanical properties via solid state diffusion + + + Model + From Latin modus (“measure”). - - - Engineered - From Latin ingenium "innate qualities, ability; inborn character," in Late Latin "a war engine, battering ram"; literally "that which is inborn," from in- ("in") + gignere ("give birth, beget"). + + + https://emmc.info/wp-content/uploads/2018/05/CWA_17284.pdf + CEN Workshop Agreement – CWA 17284 “Materials modelling – terminology, classification and metadata” - - Crystal - From Ancient Greek κρύσταλλος (krústallos, “clear ice”), from κρύος (krúos, “frost”). + + Estimation + From Latin aestimatus (“to value, rate, esteem”). - - - https://www.iso.org/obp/ui/#iso:std:iso:3252:ed-5:v1:en:term:3.3.55 - ISO 3252:2019 Powder metallurgy -reaction sintering: process wherein at least two constituents of a powder mixture react during sintering + + + DIN 8585-3:2003-09 + Widening is tensile forming to increase the circumference of a hollow body. A distinction is made between: Widening, bulging. - + DIN 8586:2003-09 - Forming of a solid body, whereby the plastic state is essentially brought about by a bending stress. + Forming of a solid body, whereby the plastic state is essentially brought about by a bending stress - - - DIN 65099-3:1989-11 - Shot peening is shot peening for shaping or straightening workpieces by introducing residual compressive stresses (from: DIN 8200/10.82). + + + Wholistic + From the word 'holistic' with the 'w-' prefix, due to the affinity with the existing word 'whole', that share the same meaning of 'holos'. - - - The disjoint union of the Item and Collection classes. - The union implies that world entities can only be items or collections (standing for a collection of causally disconnected items). -Disjointness means that a collection cannot be an item and viceversa, representing the fact that a world entity cannot be causally self-connected and non-self connected at the same time. + + + https://www.iso.org/obp/ui/fr/#iso:std:iso-iec:2382:-1:ed-3:en + All or part of the programs, procedures, rules, and associated documentation of an information processing system. - - - Cogniser - From Latin cognitio (“knowledge, perception, a judicial examination, trial”), from cognitus, past participle of cognoscere (“to know”), from co- (“together”) + *gnoscere, older form of noscere (“to know” + + + J. M. Pingarrón et al., Terminology of electrochemical methods of analysis (IUPAC Recommendations 2019), Pure and Applied Chemistry, 4, 92, 2020, 641-694. https://doi.org/10.1515/pac-2018-0109. + chronopotentiometry where the applied current is changed in steps - - ISO/ASTM 52900:2021(en), 3.3.1 - fabrication of objects through the deposition of a material using a print head, nozzle or another printer technology -Note 1 to entry: This term is often used in a non-technical context synonymously with additive manufacturing (3.1.2) and, in these cases, typically associated with machines used for non-industrial purposes including personal use. + + DIN EN 14943:2006-03 + Conversion of materials and assembly of components for the manufacture of products - - http://www.linfo.org/source_code.html - Source code (also referred to as source or code) is the version of software as it is originally written (i.e., typed into a computer) by a human in plain text (i.e., human readable alphanumeric characters). + + In the physical sciences, a phase is a region of space (a thermodynamic system), throughout which all physical properties of a material are essentially uniform. Examples of physical properties include density, index of refraction, magnetization and chemical composition. A simple description is that a phase is a region of material that is chemically uniform, physically distinct, and (often) mechanically separable. In a system consisting of ice and water in a glass jar, the ice cubes are one phase, the water is a second phase, and the humid air is a third phase over the ice and water. The glass of the jar is another separate phase. + +The term phase is sometimes used as a synonym for state of matter, but there can be several immiscible phases of the same state of matter. Also, the term phase is sometimes used to refer to a set of equilibrium states demarcated in terms of state variables such as pressure and temperature by a phase boundary on a phase diagram. Because phase boundaries relate to changes in the organization of matter, such as a change from liquid to solid or a more subtle change from one crystal structure to another, this latter usage is similar to the use of "phase" as a synonym for state of matter. However, the state of matter and phase diagram usages are not commensurate with the formal definition given above and the intended meaning must be determined in part from the context in which the term is used. + https://en.wikipedia.org/wiki/Phase_(matter) + + + + + + https://www.iso.org/obp/ui/#iso:std:iso:3252:ed-5:v1:en:term:3.3.32 + ISO 3252:2019 Powder metallurgy +liquid-phase sintering: sintering of a powder or compact containing at least two constituents, under conditions such that a liquid phase is formed + + + + + + + + + + + + + + + + + + + + + + + + + + Enforcing exclusivity between overlapping and causality. + + - - ResemblanceIcon - From Old French sambler, sembler, from Late Latin similāre, present active infinitive of similō, from Latin similis, from Proto-Italic *semalis, from Proto-Indo-European *sem- (“together, one”). + + Perspective + From medieval Latin perspectiva ‘(science of) optics’, from perspect- ‘looked at closely’, from the verb perspicere, from per- ‘through’ + specere ‘to look’. - - DIN 8589-6:2003-09 - Cutting with circular or straight cutting motion, using a multi-toothed tool of small cutting width, the cutting motion being performed by the tool - - - - - - DIN 8589-0:2003-09 - Machining in which a tool is used whose number of cutting edges, geometry of the cutting wedges and position of the cutting edges in relation to the workpiece are determined + + https://de.wikipedia.org/wiki/Werkst%C3%BCck + In manufacturing, a workpiece is a single, delimited part of largely solid material that is processed in some form (e.g. stone ). - - https://en.wikipedia.org/wiki/Technology - Technology is the application of knowledge for achieving practical goals in a reproducible way. + + DIN 8583-2:2003-09 + Continuous or stepwise pressure forming with one or more rotating tools (rollers), without or with additional tools, e.g. plugs or mandrels, rods, guide tools - - - Machine - From Latin māchina (“a machine, engine, contrivance, device, stratagem, trick”), from Doric Greek μᾱχᾰνᾱ́ (mākhanā́), cognate with Attic Greek μηχᾰνή (mēkhanḗ, “a machine, engine, contrivance, device”), from which comes mechanical. + + + measurand + VIM defines measurand as a quantity intended to be measured. This is redundant in EMMO and correspond to Quantity. - - - https://www.bipm.org/documents/20126/2071204/JCGM_200_2012.pdf - Metrology is the science of measurement and its application and includes all theoretical and practical aspects of measurement, whatever the measurement uncertainty and field of application (VIM3 2.2) + + + AnalogicalIcon + From Ancient Greek ἀναλογία (analogía), from ἀνά (aná) + λόγος (lógos, “speech, reckoning”). - - - DIN 8587:2003-09 - Forming of a solid body, whereby the plastic state is essentially brought about by shear stress. + + + International Electrotechnical Commission (IEC), IEC 60050 - International Electrotechnical Vocabulary, retrieved from: https://www.electropedia.org + method of electroanalytical chemistry used to separate by electrolyse ions of a substance and to derive the amount of this substance from the increase in mass of an electrode. - - - https://emmc.info/wp-content/uploads/2018/05/CWA_17284.pdf - CEN Workshop Agreement – CWA 17284 “Materials modelling – terminology, classification and metadata” + + + CausalStructure + From Latin causa (“reason, sake, cause”), and from Latin struere (“arrange, assemble, build”). - - - https://www.ietf.org/rfc/rfc3986.txt - The term "Uniform Resource Locator" (URL) refers to the subset of URIs that, in addition to identifying a resource, provide a means of locating the resource by describing its primary access mechanism (e.g., its network "location"). + + + DIN 8589-2:2003-09 + machining with a circular cutting movement in which the axis of rotation of the tool and the axis of the internal surface to be produced are identical and the feed movement is in the direction of this axis. The axis of rotation of the cutting movement maintains its position relative to the workpiece independently of the feed movement (axis of rotation workpiece-bound). - - - Elementary - From Latin elementārius (“elementary”), from elementum (“one of the four elements of antiquity; fundamentals”). + + + EMMO + EMMO is the acronym of Elementary Multiperspective Material Ontology. @@ -26449,59 +26347,67 @@ Note 1 to entry: This term is often used in a non-technical context synonymously - - - https://www.ietf.org/rfc/rfc3986.txt - The term "Uniform Resource Name" (URN) has been used historically to refer to both URIs under the "urn" scheme [RFC2141], which are required to remain globally unique and persistent even when the resource ceases to exist or becomes unavailable, and to any other URI with the properties of a name. + + + Part + From Latin partire, partiri ‘divide, share’. - - - CausalParticle - From Latin particula (“small part, particle”), diminutive of pars (“part, piece”). + + + https://en.wikipedia.org/wiki/Technology + Technology is the application of knowledge for achieving practical goals in a reproducible way. - - - A supply chain is a system of organizations, people, activities, information, and resources involved in supplying a product or service to a consumer. - https://en.wikipedia.org/wiki/Supply_chain + + + https://www.bipm.org/documents/20126/2071204/JCGM_200_2012.pdf + Metrology is the science of measurement and its application and includes all theoretical and practical aspects of measurement, whatever the measurement uncertainty and field of application (VIM3 2.2) - - - Product - From Latin productum ‘something produced’, derived from Latin producere, from pro- ‘forward’ + ducere ‘to lead’. + + + https://www.iso.org/standard/45324.html + A measurement is the process of experimentally obtaining one or more measurement results that can reasonably be attributed to a quantity. - - - DIN 8580:2022-12 - Manufacturing by changing the properties of the material of which a workpiece is made, which is done, among other things, by changes in the submicroscopic or atomic range, e.g. by diffusion of atoms, generation and movement of dislocations in the atomic lattice or chemical reactions, and where unavoidable changes in shape are not part of the essence of these processes. + + + DIN 8589-3:2003-09 + Machining with a circular cutting movement, usually associated with a multi-toothed tool, and with a feed movement perpendicular or oblique to the axis of rotation of the tool, to produce any workpiece surface. - - - ManufacturedProduct - From Latin manufacture: "made by hand". + + + DIN 8589-0:2003-09 + Machining in which a tool is used whose number of cutting edges, geometry of the cutting wedges and position of the cutting edges in relation to the workpiece are determined - - - J. M. Pingarrón et al., Terminology of electrochemical methods of analysis (IUPAC Recommendations 2019), Pure and Applied Chemistry, 4, 92, 2020, 641-694. https://doi.org/10.1515/pac-2018-0109. - chronopotentiometry where the applied current is changed linearly + + + https://www.iso.org/obp/ui/#iso:std:iso:15531:-1:ed-1:v1:en:term:3.6.22 + ISO 15531-1:2004 +manufacturing: function or act of converting or transforming material from raw material or semi-finished state to a state of further completion - - Observation - From Latin observare (“to watch, note, mark, heed, guard, keep, pay attention to, regard, comply with, etc.”), from ob (“before”) + servare (“to keep”), + + Fundamental + From Latin fundamentum (“foundation”), from fundō (“to lay the foundation (of something), to found”), from fundus (“bottom”). + + + + + + DIN EN 62047-1:2016-12 + Process for joining two (base) materials by means of an adhesive polymer material @@ -26511,91 +26417,118 @@ Note 1 to entry: This term is often used in a non-technical context synonymously the accumulation is similar to that used in stripping voltammetry + + + + Dedomena + From Greek, nominative plural form of δεδομένο (dedoméno) (data, information) + + + + + + http://www.linfo.org/source_code.html + Source code (also referred to as source or code) is the version of software as it is originally written (i.e., typed into a computer) by a human in plain text (i.e., human readable alphanumeric characters). + + - - CausalStructure - From Latin causa (“reason, sake, cause”), and from Latin struere (“arrange, assemble, build”). + + Device + From Old French "deviser", meaning: arrange, plan, contrive. Literally "dispose in portions," from Vulgar Latin "divisare", frequentative of Latin dividere, meaning "to divide". + + + + + + Machine + From Latin māchina (“a machine, engine, contrivance, device, stratagem, trick”), from Doric Greek μᾱχᾰνᾱ́ (mākhanā́), cognate with Attic Greek μηχᾰνή (mēkhanḗ, “a machine, engine, contrivance, device”), from which comes mechanical. - + J. M. Pingarrón et al., Terminology of electrochemical methods of analysis (IUPAC Recommendations 2019), Pure and Applied Chemistry, 4, 92, 2020, 641-694. https://doi.org/10.1515/pac-2018-0109. - chronopotentiometry where the change in applied current undergoes a cyclic current reversal + chronopotentiometry where the applied current is changed linearly - - - Estimation - From Latin aestimatus (“to value, rate, esteem”). + + + ISO/ASTM 52900:2021(en), 3.3.1 + fabrication of objects through the deposition of a material using a print head, nozzle or another printer technology +Note 1 to entry: This term is often used in a non-technical context synonymously with additive manufacturing (3.1.2) and, in these cases, typically associated with machines used for non-industrial purposes including personal use. - - - DIN EN 14943:2006-03 - Conversion of materials and assembly of components for the manufacture of products + + + J. M. Pingarrón et al., Terminology of electrochemical methods of analysis (IUPAC Recommendations 2019), Pure and Applied Chemistry, 4, 92, 2020, 641-694. https://doi.org/10.1515/pac-2018-0109 + Differential Pulse Voltammetry in which small potential pulses are superimposed onto a staircase potential ramp. - - - ISO 4885:2018-02 - hardening of a workpiece caused by the precipitation of one or more compounds from a supersaturated solid solution + + + ResemblanceIcon + From Old French sambler, sembler, from Late Latin similāre, present active infinitive of similō, from Latin similis, from Proto-Italic *semalis, from Proto-Indo-European *sem- (“together, one”). - - - https://www.iso.org/obp/ui/#iso:std:iso:55000:ed-1:v2:en:term:3.1.13 - ISO 55000:2014 -organization: person or group of people that has its own functions with responsibilities, authorities and relationships to achieve its objectives + + + Computation + From Latin con- +‎ putō (“I reckon”). - - - https://www.iso.org/obp/ui/#iso:std:iso:18435:-1:ed-1:v1:en:term:3.16 - ISO 18435-1:2009 -manufacturing process: set of processes in manufacturing involving a flow and/or transformation of material, information, energy, control, or any other element in a manufacturing area + + + https://www.ietf.org/rfc/rfc3986.txt + The term "Uniform Resource Name" (URN) has been used historically to refer to both URIs under the "urn" scheme [RFC2141], which are required to remain globally unique and persistent even when the resource ceases to exist or becomes unavailable, and to any other URI with the properties of a name. - - - DIN 8589-2:2003-09 - machining with a circular cutting movement in which the axis of rotation of the tool and the axis of the internal surface to be produced are identical and the feed movement is in the direction of this axis. The axis of rotation of the cutting movement maintains its position relative to the workpiece independently of the feed movement (axis of rotation workpiece-bound). + + + DIN EN ISO 15156-3:2015-12 + Heat to a temperature appropriate for the particular material, maintain at that temperature and then cool at an appropriate rate to reduce hardness, improve machinability or achieve desired properties. - - - - - - - - - - - - - - + + + + http://www.linfo.org/program.html + Software is usually used as a generic term for programs. However, in its broadest sense it can refer to all information (i.e., both programs and data) in electronic form and can provide a distinction from hardware, which refers to computers or other electronic systems on which software can exist and be use. +Here we explicitly include in the definition also all the data (e.g. source code, script files) that takes part to the building of the executable, are necessary to the execution of a program or that document it for the users. + - - DIN 8589-3:2003-09 - Machining with a circular cutting movement, usually associated with a multi-toothed tool, and with a feed movement perpendicular or oblique to the axis of rotation of the tool, to produce any workpiece surface. + + DIN 8586:2003-09 + Forming of a solid body, whereby the plastic state is essentially brought about by a bending stress. - - - Simulacrum - From Latin simulacrum ("likeness, semblance") + + + DIN 55405:2014-12 + Method of joining metallic materials with the aid of a molten filler metal (solder), optionally with the use of flow agents + + + + + + Product + From Latin productum ‘something produced’, derived from Latin producere, from pro- ‘forward’ + ducere ‘to lead’. + + + + + + A tessellation (or tiling) is the covering of a surface, often a plane, using one or more geometric shapes, called tiles, with no overlaps and no gaps. + https://en.wikipedia.org/wiki/Tessellation @@ -26625,209 +26558,205 @@ manufacturing process: set of processes in manufacturing involving a flow and/or Enforcing parthood reflexivity. - - - - https://www.iso.org/obp/ui/#iso:std:iso:3252:ed-5:v1:en:term:3.3.32 - ISO 3252:2019 Powder metallurgy -liquid-phase sintering: sintering of a powder or compact containing at least two constituents, under conditions such that a liquid phase is formed - - - - DIN EN ISO 5349-2:2015-12 - Object that is processed with a machine + + DIN 8590 Berichtigung 1:2004-02 + Manufacturing by separating particles of material from a solid body by non-mechanical means. Ablation refers both to the removal of layers of material and to the separation of workpiece parts. The production process of ablation is considered in its stationary instantaneous state, independently of the application of auxiliary processes necessary to initiate the process. Ablation is divided into three subgroups according to the order point of view (OGP) "process in the effective zone on the surface of the workpiece": - thermal ablation; - chemical ablation; - electrochemical ablation. - - DIN EN 62047-1:2016-12 - Process for joining two (base) materials by means of an adhesive polymer material - - - - - - isCauseOf - From Latin causa (“reason, sake, cause”). + + DIN 8589-6:2003-09 + Cutting with circular or straight cutting motion, using a multi-toothed tool of small cutting width, the cutting motion being performed by the tool - - - Assemblying - From Old French asembler, based on Latin ad- ‘to’ + simul ‘together’. + + + DIN 65099-3:1989-11 + Shot peening is shot peening for shaping or straightening workpieces by introducing residual compressive stresses (from: DIN 8200/10.82). - - - mereological - Coined by Stanisław Leśniewski in 1927, from Ancient Greek μέρος (méros, “part”) +‎ -logy (“study, discussion, science”). -https://en.wiktionary.org/wiki/mereology + + + https://emmc.info/wp-content/uploads/2018/05/CWA_17284.pdf + CEN Workshop Agreement – CWA 17284 “Materials modelling – terminology, classification and metadata” - - DIN 8583-1:2003-09 - Forming of a solid body, whereby the plastic state is essentially brought about by uniaxial or multiaxial compressive stress. + + DIN 65099-5:1989-11 + Screwing (screwing on, screwing in, screwing tight) is joining by pressing on by means of a self-locking thread (from: DIN 8593 Part 3/09.85). - - Quantum - From Latin quantum (plural quanta) "as much as, so much as". + + CausalPath + From Ancient Greek πάτος (pátos, “path”). - EN 16603-11:2019-11 - application of scientific knowledge, tools, techniques, crafts, systems or methods of organization in order to solve a problem or achieve an objective + ISO 14034:2016-11 + application of scientific knowledge, tools, techniques, crafts or systems in order to solve a problem or to achieve an objective which can result in a product or process - - DIN 8588:2013-08 - Cutting workpieces between two cutting edges that move past each other (see Figure 1 [see figure in the standard]). + + https://en.wikipedia.org/wiki/Semiotic_theory_of_Charles_Sanders_Peirce#II._Icon,_index,_symbol + In Peirce semiotics three subtypes of icon are possible: +(a) the image, which depends on a simple quality (e.g. picture) +(b) the diagram, whose internal relations, mainly dyadic or so taken, represent by analogy the relations in something (e.g. math formula, geometric flowchart) +(c) the metaphor, which represents the representative character of a sign by representing a parallelism in something else +[Wikipedia] - - - CausalSystem - From Latin causa (“reason, sake, cause”), and Ancient Greek σύστημα (sústēma, “musical scale; organized body; whole made of several parts or members”), from σῠν- (sun-, prefix meaning ‘with, together’) + ἵστημι (hístēmi, “to stand”). + + + DIN 8593-0:2003-09 + The permanent joining or other bringing together of two or more workpieces of a geometric shape or of similar workpieces with shapeless material. In each case, the cohesion is created locally and increased as a whole. - - - DIN EN ISO 4885:2018-07 - Treatment carried out after hardening or case hardening consisting of cooling to a temperature below room temperature to complete the transformation of austenite to martensite + + + A path is a string of characters used to uniquely identify a location in a directory structure according to a particular convention. + https://en.wikipedia.org/wiki/Path_(computing)#Universal_Naming_Convention - - - Boson - 1940s: named after S.N. Bose. + + + https://www.iso.org/obp/ui/#iso:std:iso:15531:-1:ed-1:v1:en:term:3.6.9 + ISO 15531-1:2004 +discrete manufacturing: production of discrete items. - - J. M. Pingarrón et al., Terminology of electrochemical methods of analysis (IUPAC Recommendations 2019), Pure and Applied Chemistry, 4, 92, 2020, 641-694. https://doi.org/10.1515/pac-2018-0109 - Differential Pulse Voltammetry in which small potential pulses are superimposed onto a staircase potential ramp. + + https://www.ietf.org/rfc/rfc3986.txt + A Uniform Resource Identifier (URI) is a compact sequence of characters that identifies an abstract or physical resource. - - - Holistic - Holism (from Greek ὅλος holos "all, whole, entire"). + + + https://www.iso.org/obp/ui/#iso:std:iso:8887:-1:ed-1:v1:en:term:3.1.5 + ISO 8887-1:2017 +manufacturing: production of components - - - https://www.w3.org/TR/2012/REC-owl2-syntax-20121211/#Global_Restrictions_on_Axioms_in_OWL_2_DL - Axiom not included in the theory because of OWL 2 DL global restrictions for decidability. + + + DIN 8588:2013-08 + Mechanical separation of workpieces without the formation of shapeless material, i.e. also without chips (chipless). - - - Scholz F, Nitschke L, Henrion G (1989) Naturwiss 76:71; - electrochemical method where traces of solid particles are abrasively transferred onto the surface of an electrode, followed by an electrochemical dissolution (anodic or cathodic dissolution) that is recorded as a current–voltage curve + + + DIN 65099-5:1989-11 + Nailing is joining by hammering or pressing nails (wire pins) as auxiliary parts into the solid material. Several parts are joined by pressing them together (from: DIN 8593 part 3/09.85). - - - Artifact - From Latin arte ‘by or using art’ + factum ‘something made’. + + + CausalSystem + From Latin causa (“reason, sake, cause”), and Ancient Greek σύστημα (sústēma, “musical scale; organized body; whole made of several parts or members”), from σῠν- (sun-, prefix meaning ‘with, together’) + ἵστημι (hístēmi, “to stand”). - - - J. M. Pingarrón et al., Terminology of electrochemical methods of analysis (IUPAC Recommendations 2019), Pure and Applied Chemistry, 4, 92, 2020, 641-694. https://doi.org/10.1515/pac-2018-0109 - two-step electrochemical measurement in which 1) material is accumulated at an electrode and 2) the material is removed by chemical reaction or electrochemically at constant current with measurement of electrode potential + + + mereological + Coined by Stanisław Leśniewski in 1927, from Ancient Greek μέρος (méros, “part”) +‎ -logy (“study, discussion, science”). +https://en.wiktionary.org/wiki/mereology - - - https://www.ietf.org/rfc/rfc3986.txt - A Uniform Resource Identifier (URI) is a compact sequence of characters that identifies an abstract or physical resource. + + + DIN EN 9110:2018-08 + action to disassemble a product or a component by removing all or some of its constituent parts with the intent to salvage - - - DIN EN 10210-3:2020-11 - Process consisting of two steps: - first, the steel is heated in a quenching treatment to a temperature above Ac3 and then rapidly cooled in a liquid to produce a process-specific grain structure; - subsequently, the steel is heated to a specific temperature during tempering to set the desired property and cooled in air. + + + DIN 8593-3:2003-09 + A collective term for the processes in which, during joining, the parts to be joined and any auxiliary parts are essentially only elastically deformed and unintentional loosening is prevented by frictional connection. - - isPredecessorOf - From Latin prae ("beforehand") and decedere ("depart"). + + Language + From Latin lingua (“tongue, speech, language”), from Old Latin dingua (“tongue”). - - - DIN 65099-3:1989-11 - Free forming is pressure forming with tools that do not or only partially contain the shape of the workpiece and move against each other. + + + Icon + From Ancient Greek εἰκών (eikṓn, “likeness, image, portrait”). - - A variable is a symbolic object that stands for any other mathematical object, such as number, a vector, a matrix, a function, the argument of a function, a set, an element of a set. - https://en.wikipedia.org/wiki/Variable_(mathematics) + + J. M. Pingarrón et al., Terminology of electrochemical methods of analysis (IUPAC Recommendations 2019), Pure and Applied Chemistry, 4, 92, 2020, 641-694. https://doi.org/10.1515/pac-2018-0109. + chronopotentiometry where the change in applied current undergoes a cyclic current reversal - - - DIN 55405:2014-12 - Method of joining metallic materials with the aid of a molten filler metal (solder), optionally with the use of flow agents + + + + + + + + + Every entity is made of quantum parts. This axiomatisation is the expression of the radical reductionistic approach of the EMMO. - - - https://datatracker.ietf.org/doc/rfc3987/ - An Internationalized Resource Identifier (IRI) is a compact sequence of characters that identifies an abstract or physical resource. It is similar to URI, but greatly extends the allowed character set from ASCII to the Universal Character Set. + + + Elementary + From Latin elementārius (“elementary”), from elementum (“one of the four elements of antiquity; fundamentals”). - - - Particle - From Latin particula (“small part, particle”), diminutive of pars (“part, piece”). + + + Scholz F, Nitschke L, Henrion G (1989) Naturwiss 76:71; + electrochemical method where traces of solid particles are abrasively transferred onto the surface of an electrode, followed by an electrochemical dissolution (anodic or cathodic dissolution) that is recorded as a current–voltage curve - - - Perspective - From medieval Latin perspectiva ‘(science of) optics’, from perspect- ‘looked at closely’, from the verb perspicere, from per- ‘through’ + specere ‘to look’. + + + CausalChain + From Old French chaine, chaene (“chain”), from Latin catēna (“chain”). - - - ISO/TR 10809-1:2009, 0000_19 - Heat treatment process that generally produces martensite in the matrix. + + + Assemblying + From Old French asembler, based on Latin ad- ‘to’ + simul ‘together’. diff --git a/chameo.ttl b/chameo.ttl index 41deef5..6e6377b 100644 --- a/chameo.ttl +++ b/chameo.ttl @@ -890,12 +890,12 @@ ns1:EMMO_18d180e4_5e3e_42f7_820c_e08951223486 a owl:Class ; rdfs:comment "A real number."@en ; rdfs:isDefinedBy ; rdfs:subClassOf [ a owl:Restriction ; + owl:allValuesFrom xsd:double ; + owl:onProperty ns1:EMMO_faf79f53_749d_40b2_807c_d34244c192f4 ], + [ a owl:Restriction ; owl:onDataRange xsd:double ; owl:onProperty ns1:EMMO_faf79f53_749d_40b2_807c_d34244c192f4 ; owl:qualifiedCardinality "1"^^xsd:nonNegativeInteger ], - [ a owl:Restriction ; - owl:allValuesFrom xsd:double ; - owl:onProperty ns1:EMMO_faf79f53_749d_40b2_807c_d34244c192f4 ], ns1:EMMO_21f56795_ee72_4858_b571_11cfaa59c1a8 ; owl:equivalentClass [ a owl:Restriction ; owl:onProperty ns1:EMMO_faf79f53_749d_40b2_807c_d34244c192f4 ; @@ -8565,8 +8565,7 @@ ns1:EMMO_ffe760a2_9d1f_4aef_8bee_1f450f9cb00d a owl:Class ; :AnalyticalElectronMicroscopy a owl:Class ; rdfs:label "AnalyticalElectronMicroscopy"@en ; - rdfs:comment ""^^xsd:string, - "Analytical electron microscopy (AEM) refers to the collection of spectroscopic data in TEM or STEM, enabling qualitative or quantitative compositional analysis."@en ; + rdfs:comment "Analytical electron microscopy (AEM) refers to the collection of spectroscopic data in TEM or STEM, enabling qualitative or quantitative compositional analysis."@en ; rdfs:isDefinedBy : ; rdfs:subClassOf :Microscopy ; skos:prefLabel "AnalyticalElectronMicroscopy"@en ; @@ -8574,15 +8573,12 @@ ns1:EMMO_ffe760a2_9d1f_4aef_8bee_1f450f9cb00d a owl:Class ; :AnodicStrippingVoltammetry a owl:Class ; rdfs:label "AnodicStrippingVoltammetry"@en ; - rdfs:comment ""^^xsd:string, - "A peak-shaped anodic stripping voltammogram is obtained. Peak current depends on time of accumulation, mass transport of analyte (stirring), scan rate and mode (linear or pulse), and analyte concentration in solution."@en, - "A solid electrode, carbon paste or composite electrode, bismuth film electrode, mercury film electrode, or static mercury drop electrode may be used."@en, - "Stripping voltammetry in which material accumulated at the working electrode is electrochemically oxi- dized in the stripping step."@en ; + rdfs:comment "Stripping voltammetry in which material accumulated at the working electrode is electrochemically oxi- dized in the stripping step. A peak-shaped anodic stripping voltammogram is obtained. Peak current depends on time of accumulation, mass transport of analyte (stirring), scan rate and mode (linear or pulse), and analyte concentration in solution. A solid electrode, carbon paste or composite electrode, bismuth film electrode, mercury film electrode, or static mercury drop electrode may be used."@en ; rdfs:isDefinedBy : ; rdfs:subClassOf :StrippingVoltammetry ; skos:prefLabel "AnodicStrippingVoltammetry"@en ; ns1:EMMO_26bf1bef_d192_4da6_b0eb_d2209698fb54 "https://www.wikidata.org/wiki/Q939328"^^xsd:string ; - ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "Stripping voltammetry in which material accumulated at the working electrode is electrochemically oxi- dized in the stripping step."@en ; + ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "Stripping voltammetry in which material accumulated at the working electrode is electrochemically oxi- dized in the stripping step. A peak-shaped anodic stripping voltammogram is obtained. Peak current depends on time of accumulation, mass transport of analyte (stirring), scan rate and mode (linear or pulse), and analyte concentration in solution. A solid electrode, carbon paste or composite electrode, bismuth film electrode, mercury film electrode, or static mercury drop electrode may be used."@en ; ns1:EMMO_fe015383_afb3_44a6_ae86_043628697aa2 "https://doi.org/10.1515/pac-2018-0109"@en . :AtomProbeTomography a owl:Class ; @@ -8671,8 +8667,7 @@ ns1:EMMO_ffe760a2_9d1f_4aef_8bee_1f450f9cb00d a owl:Class ; :CharacterisationMeasurementTask a owl:Class ; rdfs:label "CharacterisationMeasurementTask"@en ; - rdfs:comment ""^^xsd:string, - "Used to break-down a CharacterisationMeasurementProcess into his specific tasks."@en ; + rdfs:comment "Used to break-down a CharacterisationMeasurementProcess into his specific tasks."@en ; rdfs:isDefinedBy : ; rdfs:subClassOf [ a owl:Restriction ; owl:onProperty [ owl:inverseOf ns1:EMMO_70da982d_1810_4b01_9630_a28e216ecd9a ] ; @@ -8683,8 +8678,7 @@ ns1:EMMO_ffe760a2_9d1f_4aef_8bee_1f450f9cb00d a owl:Class ; :CharacterisationProtocol a owl:Class ; rdfs:label "CharacterisationProtocol"@en ; - rdfs:comment ""^^xsd:string, - "A characterisation protocol is defined whenever it is desirable to standardize a laboratory method to ensure successful replication of results by others in the same laboratory or by other laboratories."@en ; + rdfs:comment "A characterisation protocol is defined whenever it is desirable to standardize a laboratory method to ensure successful replication of results by others in the same laboratory or by other laboratories."@en ; rdfs:isDefinedBy : ; rdfs:subClassOf :CharacterisationProcedure ; skos:prefLabel "CharacterisationProtocol"@en ; @@ -8692,8 +8686,7 @@ ns1:EMMO_ffe760a2_9d1f_4aef_8bee_1f450f9cb00d a owl:Class ; :CharacterisationSystem a owl:Class ; rdfs:label "CharacterisationSystem"@en ; - rdfs:comment ""^^xsd:string, - "A set of one or more 'CharacterisationInstruments' and often other devices, including any sample holder, reagent and supply, assembled and adapted to give information used to generate 'MeasuredQuantityProperty' within specified intervals for quantities of specified kinds."@en, + rdfs:comment "A set of one or more 'CharacterisationInstruments' and often other devices, including any sample holder, reagent and supply, assembled and adapted to give information used to generate 'MeasuredQuantityProperty' within specified intervals for quantities of specified kinds."@en, """Set of one or more measuring instruments and often other components, assembled and adapted to give information used to generate measured values within specified intervals for quantities of specified kinds @@ -8728,8 +8721,7 @@ NOTE 4 A measuring system can be used as a measurement standard."""@en ; :CharacterisedSample a owl:Class ; rdfs:label "CharacterisedSample"^^xsd:string ; - rdfs:comment ""^^xsd:string, - "The sample after having been subjected to a characterization process"@en ; + rdfs:comment "The sample after having been subjected to a characterization process"@en ; rdfs:isDefinedBy : ; rdfs:subClassOf :Sample ; skos:prefLabel "CharacterisedSample"^^xsd:string ; @@ -8737,46 +8729,37 @@ NOTE 4 A measuring system can be used as a measurement standard."""@en ; :Chronoamperometry a owl:Class ; rdfs:label "Chronoamperometry"@en ; - rdfs:comment ""^^xsd:string, - "If the potential step is from a potential at which no current flows (i.e., at which the oxidation or reduction of the electrochemically active species does not take place) to one at which the current is limited by diffusion (see diffusion-limited current), the current obeys the Cottrell equation."@en, - "amperometry in which the current is measured as a function of time after a change in the applied potential"@en ; + rdfs:comment "Amperometry in which the current is measured as a function of time after a change in the applied potential. If the potential step is from a potential at which no current flows (i.e., at which the oxidation or reduction of the electrochemically active species does not take place) to one at which the current is limited by diffusion (see diffusion-limited current), the current obeys the Cottrell equation."@en ; rdfs:isDefinedBy : ; rdfs:subClassOf :Amperometry ; skos:altLabel "AmperiometricDetection"@en, "AmperometricCurrentTimeCurve"@en ; skos:prefLabel "Chronoamperometry"@en ; - ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "amperometry in which the current is measured as a function of time after a change in the applied potential"@en ; + ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "Amperometry in which the current is measured as a function of time after a change in the applied potential. If the potential step is from a potential at which no current flows (i.e., at which the oxidation or reduction of the electrochemically active species does not take place) to one at which the current is limited by diffusion (see diffusion-limited current), the current obeys the Cottrell equation."@en ; ns1:EMMO_fe015383_afb3_44a6_ae86_043628697aa2 "https://doi.org/10.1515/pac-2018-0109"@en . :Chronocoulometry a owl:Class ; rdfs:label "Chronocoulometry"@en ; - rdfs:comment ""^^xsd:string, - "Chronocoulometry provides the same information that is provided by chronoamperometry, since it is based on the integration of the I-t curve. Nevertheless, chronocoulometry offers important experimental advantages, such as (i) the measured signal usually increases with time and hence the later parts of the transient can be detected more accurately, (ii) a better signal-to-noise ratio can be achieved, and (iii) other contributions to overall charge passed as a function of time can be discriminated from those due to the diffusion of electroactive substances."@en, - "direct coulometry at controlled potential in which the electric charge passed after the application of a potential step perturbation is measured as a function of time (Q-t curve)"@en ; + rdfs:comment "Direct coulometry at controlled potential in which the electric charge passed after the application of a potential step perturbation is measured as a function of time (Q-t curve). Chronocoulometry provides the same information that is provided by chronoamperometry, since it is based on the integration of the I-t curve. Nevertheless, chronocoulometry offers important experimental advantages, such as (i) the measured signal usually increases with time and hence the later parts of the transient can be detected more accurately, (ii) a better signal-to-noise ratio can be achieved, and (iii) other contributions to overall charge passed as a function of time can be discriminated from those due to the diffusion of electroactive substances."@en ; rdfs:isDefinedBy : ; rdfs:subClassOf :Coulometry ; skos:prefLabel "Chronocoulometry"@en ; - ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "direct coulometry at controlled potential in which the electric charge passed after the application of a potential step perturbation is measured as a function of time (Q-t curve)"@en ; + ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "Direct coulometry at controlled potential in which the electric charge passed after the application of a potential step perturbation is measured as a function of time (Q-t curve). Chronocoulometry provides the same information that is provided by chronoamperometry, since it is based on the integration of the I-t curve. Nevertheless, chronocoulometry offers important experimental advantages, such as (i) the measured signal usually increases with time and hence the later parts of the transient can be detected more accurately, (ii) a better signal-to-noise ratio can be achieved, and (iii) other contributions to overall charge passed as a function of time can be discriminated from those due to the diffusion of electroactive substances."@en ; ns1:EMMO_fe015383_afb3_44a6_ae86_043628697aa2 "https://doi.org/10.1515/pac-2018-0109"@en . :ConductometricTitration a owl:Class ; rdfs:label "ConductometricTitration"@en ; - rdfs:comment ""^^xsd:string, - "The equivalence-point is obtained as the intersection of linear parts of the conductance G, versus titrant volume V, curve (see"@en, - "The method can be used for deeply coloured or turbid solutions. Acid-base and precipita- tion reactions are most frequently used."@en, - "The method is based on replacing an ionic species of the analyte with another species, cor- responding to the titrant or the product with significantly different conductance."@en, - "titration in which the electric conductivity of a solution is measured as a function of the amount of titrant added"@en ; + rdfs:comment "Titration in which the electric conductivity of a solution is measured as a function of the amount of titrant added. The equivalence-point is obtained as the intersection of linear parts of the conductance G, versus titrant volume V, curve. The method can be used for deeply coloured or turbid solutions. Acid-base and precipitation reactions are most frequently used. The method is based on replacing an ionic species of the analyte with another species, cor- responding to the titrant or the product with significantly different conductance."@en ; rdfs:isDefinedBy : ; rdfs:subClassOf :Conductometry ; skos:prefLabel "ConductometricTitration"@en ; ns1:EMMO_26bf1bef_d192_4da6_b0eb_d2209698fb54 "https://www.wikidata.org/wiki/Q11778221"^^xsd:string ; - ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "titration in which the electric conductivity of a solution is measured as a function of the amount of titrant added"@en ; + ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "Titration in which the electric conductivity of a solution is measured as a function of the amount of titrant added. The equivalence-point is obtained as the intersection of linear parts of the conductance G, versus titrant volume V, curve. The method can be used for deeply coloured or turbid solutions. Acid-base and precipitation reactions are most frequently used. The method is based on replacing an ionic species of the analyte with another species, cor- responding to the titrant or the product with significantly different conductance."@en ; ns1:EMMO_fe015383_afb3_44a6_ae86_043628697aa2 "https://doi.org/10.1515/pac-2018-0109"@en . :ConfocalMicroscopy a owl:Class ; rdfs:label "ConfocalMicroscopy"@en ; - rdfs:comment ""^^xsd:string, - "Confocal microscopy, most frequently confocal laser scanning microscopy (CLSM) or laser scanning confocal microscopy (LSCM), is an optical imaging technique for increasing optical resolution and contrast of a micrograph by means of using a spatial pinhole to block out-of-focus light in image formation."@en ; + rdfs:comment "Confocal microscopy, most frequently confocal laser scanning microscopy (CLSM) or laser scanning confocal microscopy (LSCM), is an optical imaging technique for increasing optical resolution and contrast of a micrograph by means of using a spatial pinhole to block out-of-focus light in image formation."@en ; rdfs:isDefinedBy : ; rdfs:subClassOf :Microscopy ; skos:prefLabel "ConfocalMicroscopy"@en ; @@ -8784,14 +8767,11 @@ NOTE 4 A measuring system can be used as a measurement standard."""@en ; :CoulometricTitration a owl:Class ; rdfs:label "CoulometricTitration"@en ; - rdfs:comment ""^^xsd:string, - "Coulometric titrations are usually carried out in convective mass transfer mode using a large surface working electrode. The reference and auxiliary electrodes are located in sepa- rate compartments. A basic requirement is a 100 % current efficiency of titrant generation at the working electrode. End-point detection can be accomplished with potentiometry, amperometry, biamperometry, bipotentiometry, photometry, or by using a visual indicator."@en, - "The main advantages are that titration is possible with less stable titrants, the standardi- zation of titrant is not necessary, the volume of the test solution is not changed, and the method is easily automated."@en, - "titration in which the titrant is generated electrochemically, either by constant current or at constant potential. The titrant reacts stoichiometrically with the analyte, the amount of which is calculated using Faraday’s laws of electrolysis from the electric charge required to reach the end-point"@en ; + rdfs:comment "Titration in which the titrant is generated electrochemically, either by constant current or at constant potential. The titrant reacts stoichiometrically with the analyte, the amount of which is calculated using Faraday’s laws of electrolysis from the electric charge required to reach the end-point. Coulometric titrations are usually carried out in convective mass transfer mode using a large surface working electrode. The reference and auxiliary electrodes are located in sepa- rate compartments. A basic requirement is a 100 % current efficiency of titrant generation at the working electrode. End-point detection can be accomplished with potentiometry, amperometry, biamperometry, bipotentiometry, photometry, or by using a visual indicator. The main advantages are that titration is possible with less stable titrants, the standardi- zation of titrant is not necessary, the volume of the test solution is not changed, and the method is easily automated."@en ; rdfs:isDefinedBy : ; rdfs:subClassOf :Coulometry ; skos:prefLabel "CoulometricTitration"@en ; - ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "titration in which the titrant is generated electrochemically, either by constant current or at constant potential. The titrant reacts stoichiometrically with the analyte, the amount of which is calculated using Faraday’s laws of electrolysis from the electric charge required to reach the end-point"@en . + ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "Titration in which the titrant is generated electrochemically, either by constant current or at constant potential. The titrant reacts stoichiometrically with the analyte, the amount of which is calculated using Faraday’s laws of electrolysis from the electric charge required to reach the end-point. Coulometric titrations are usually carried out in convective mass transfer mode using a large surface working electrode. The reference and auxiliary electrodes are located in sepa- rate compartments. A basic requirement is a 100 % current efficiency of titrant generation at the working electrode. End-point detection can be accomplished with potentiometry, amperometry, biamperometry, bipotentiometry, photometry, or by using a visual indicator. The main advantages are that titration is possible with less stable titrants, the standardi- zation of titrant is not necessary, the volume of the test solution is not changed, and the method is easily automated."@en . :CriticalAndSupercriticalChromatography a owl:Class ; rdfs:label "CriticalAndSupercriticalChromatography"@en ; @@ -8802,19 +8782,14 @@ NOTE 4 A measuring system can be used as a measurement standard."""@en ; :CyclicVoltammetry a owl:Class ; rdfs:label "CyclicVoltammetry"@en ; - rdfs:comment ""^^xsd:string, - "Cyclic voltammetry is frequently used for the investigation of mechanisms of electrochemi- cal/electrode reactions. The current-potential curve may be modelled to obtain reaction mechanisms and electrochemical parameters."@en, - "Normally the initial potential is chosen where no electrode reaction occurs and the switch- ing potential is greater (more positive for an oxidation or more negative for a reduction) than the peak potential of the analyte reaction."@en, - "The initial potential is usually the negative or positive limit of the cycle but can have any value between the two limits, as can the initial scan direction. The limits of the potential are known as the switching potentials."@en, - "The plot of current against potential is termed a cyclic voltammogram. Usually peak-shaped responses are obtained for scans in both directions."@en, - "voltammetry in which the electric current is recorded as the electrode potential is varied with time cycli- cally between two potential limits, normally at a constant scan rate"@en ; + rdfs:comment "Voltammetry in which the electric current is recorded as the electrode potential is varied with time cyclically between two potential limits, normally at a constant scan rate. Cyclic voltammetry is frequently used for the investigation of mechanisms of electrochemical/electrode reactions. The current-potential curve may be modelled to obtain reaction mechanisms and electrochemical parameters. Normally the initial potential is chosen where no electrode reaction occurs and the switching potential is greater (more positive for an oxidation or more negative for a reduction) than the peak potential of the analyte reaction. The initial potential is usually the negative or positive limit of the cycle but can have any value between the two limits, as can the initial scan direction. The limits of the potential are known as the switching potentials. The plot of current against potential is termed a cyclic voltammogram. Usually peak-shaped responses are obtained for scans in both directions."@en ; rdfs:isDefinedBy : ; rdfs:subClassOf :Voltammetry ; skos:altLabel "CV"@en ; skos:prefLabel "CyclicVoltammetry"@en ; ns1:EMMO_26bf1bef_d192_4da6_b0eb_d2209698fb54 "https://www.wikidata.org/wiki/Q1147647"^^xsd:string ; ns1:EMMO_6dd685dd_1895_46e4_b227_be9f7d643c25 "https://dbpedia.org/page/Cyclic_voltammetry"^^xsd:anyURI ; - ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "voltammetry in which the electric current is recorded as the electrode potential is varied with time cycli- cally between two potential limits, normally at a constant scan rate"@en ; + ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "Voltammetry in which the electric current is recorded as the electrode potential is varied with time cyclically between two potential limits, normally at a constant scan rate. Cyclic voltammetry is frequently used for the investigation of mechanisms of electrochemical/electrode reactions. The current-potential curve may be modelled to obtain reaction mechanisms and electrochemical parameters. Normally the initial potential is chosen where no electrode reaction occurs and the switching potential is greater (more positive for an oxidation or more negative for a reduction) than the peak potential of the analyte reaction. The initial potential is usually the negative or positive limit of the cycle but can have any value between the two limits, as can the initial scan direction. The limits of the potential are known as the switching potentials. The plot of current against potential is termed a cyclic voltammogram. Usually peak-shaped responses are obtained for scans in both directions."@en ; ns1:EMMO_c84c6752_6d64_48cc_9500_e54a3c34898d "https://en.wikipedia.org/wiki/Cyclic_voltammetry"^^xsd:anyURI ; ns1:EMMO_fe015383_afb3_44a6_ae86_043628697aa2 "https://doi.org/10.1515/pac-2018-0109"@en . @@ -8828,8 +8803,7 @@ NOTE 4 A measuring system can be used as a measurement standard."""@en ; :DataNormalisation a owl:Class ; rdfs:label "DataNormalisation"@en ; - rdfs:comment ""^^xsd:string, - "Data normalization involves adjusting raw data to a notionally common scale."@en, + rdfs:comment "Data normalization involves adjusting raw data to a notionally common scale."@en, "It involves the creation of shifted and/or scaled versions of the values to allow post-processing in a way that eliminates the effects of influences on subsequent properties extraction."@en ; rdfs:isDefinedBy : ; rdfs:subClassOf :DataPreparation ; @@ -8839,8 +8813,7 @@ NOTE 4 A measuring system can be used as a measurement standard."""@en ; :DielectricAndImpedanceSpectroscopy a owl:Class ; rdfs:label "DielectricAndImpedanceSpectroscopy"@en ; - rdfs:comment ""^^xsd:string, - "Dielectric spectroscopy (DS) or impedance spectroscopy, also known as electrochemical impedance spectroscopy, is frequently used to study the response of a sample subjected to an applied electric field of fixed or changing frequency. DS describes the dielectric properties of a material as a function of frequency. In DS, the radio and microwave frequency regions of the electromagnetic spectrum have been successfully made to interact with materials, so as to study the behavior of molecules. The interaction of applied alternating electric fields with dipoles possessing reorientation mobility in materials is also dealt by DS."@en ; + rdfs:comment "Dielectric spectroscopy (DS) or impedance spectroscopy, also known as electrochemical impedance spectroscopy, is frequently used to study the response of a sample subjected to an applied electric field of fixed or changing frequency. DS describes the dielectric properties of a material as a function of frequency. In DS, the radio and microwave frequency regions of the electromagnetic spectrum have been successfully made to interact with materials, so as to study the behavior of molecules. The interaction of applied alternating electric fields with dipoles possessing reorientation mobility in materials is also dealt by DS."@en ; rdfs:isDefinedBy : ; rdfs:subClassOf :Spectroscopy ; skos:prefLabel "DielectricAndImpedanceSpectroscopy"@en ; @@ -8848,14 +8821,11 @@ NOTE 4 A measuring system can be used as a measurement standard."""@en ; :Dielectrometry a owl:Class ; rdfs:label "Dielectrometry"@en ; - rdfs:comment ""^^xsd:string, - "Dielectrometric titrations use dielectrometry for the end-point detection."@en, - "The method is used to monitor the purity of dielectrics, for example to detect small amounts of moisture."@en, - "electrochemical measurement principle based on the measurement of the dielectric constant of a sample resulting from the orientation of particles (molecules or ions) that have a dipole moment in an electric field"@en ; + rdfs:comment "Electrochemical measurement principle based on the measurement of the dielectric constant of a sample resulting from the orientation of particles (molecules or ions) that have a dipole moment in an electric field. Dielectrometric titrations use dielectrometry for the end-point detection. The method is used to monitor the purity of dielectrics, for example to detect small amounts of moisture."@en ; rdfs:isDefinedBy : ; rdfs:subClassOf :ElectrochemicalTesting ; skos:prefLabel "Dielectrometry"@en ; - ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "electrochemical measurement principle based on the measurement of the dielectric constant of a sample resulting from the orientation of particles (molecules or ions) that have a dipole moment in an electric field"@en ; + ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "Electrochemical measurement principle based on the measurement of the dielectric constant of a sample resulting from the orientation of particles (molecules or ions) that have a dipole moment in an electric field. Dielectrometric titrations use dielectrometry for the end-point detection. The method is used to monitor the purity of dielectrics, for example to detect small amounts of moisture."@en ; ns1:EMMO_fe015383_afb3_44a6_ae86_043628697aa2 "https://doi.org/10.1515/pac-2018-0109"@en . :DifferentialRefractiveIndex a owl:Class ; @@ -8867,8 +8837,7 @@ NOTE 4 A measuring system can be used as a measurement standard."""@en ; :DifferentialScanningCalorimetry a owl:Class ; rdfs:label "DifferentialScanningCalorimetry"@en ; - rdfs:comment ""^^xsd:string, - "Differential scanning calorimetry (DSC) is a thermoanalytical technique in which the difference in the amount of heat required to increase the temperature of a sample and reference is measured as a function of temperature. Both the sample and reference are maintained at nearly the same temperature throughout the experiment. Generally, the temperature program for a DSC analysis is designed such that the sample holder temperature increases linearly as a function of time. The reference sample should have a well-defined heat capacity over the range of temperatures to be scanned. Additionally, the reference sample must be stable, of high purity, and must not experience much change across the temperature scan. Typically, reference standards have been metals such as indium, tin, bismuth, and lead, but other standards such as polyethylene and fatty acids have been proposed to study polymers and organic compounds, respectively."@en ; + rdfs:comment "Differential scanning calorimetry (DSC) is a thermoanalytical technique in which the difference in the amount of heat required to increase the temperature of a sample and reference is measured as a function of temperature. Both the sample and reference are maintained at nearly the same temperature throughout the experiment. Generally, the temperature program for a DSC analysis is designed such that the sample holder temperature increases linearly as a function of time. The reference sample should have a well-defined heat capacity over the range of temperatures to be scanned. Additionally, the reference sample must be stable, of high purity, and must not experience much change across the temperature scan. Typically, reference standards have been metals such as indium, tin, bismuth, and lead, but other standards such as polyethylene and fatty acids have been proposed to study polymers and organic compounds, respectively."@en ; rdfs:isDefinedBy : ; rdfs:subClassOf :ThermochemicalTesting ; skos:altLabel "DSC"^^xsd:string ; @@ -8877,8 +8846,7 @@ NOTE 4 A measuring system can be used as a measurement standard."""@en ; :DifferentialThermalAnalysis a owl:Class ; rdfs:label "DifferentialThermalAnalysis"@en ; - rdfs:comment ""^^xsd:string, - "Differential thermal analysis (DTA) is a thermoanalytic technique that is similar to differential scanning calorimetry. In DTA, the material under study and an inert reference are made to undergo identical thermal cycles, (i.e., same cooling or heating programme) while recording any temperature difference between sample and reference.[1] This differential temperature is then plotted against time, or against temperature (DTA curve, or thermogram). Changes in the sample, either exothermic or endothermic, can be detected relative to the inert reference. Thus, a DTA curve provides data on the transformations that have occurred, such as glass transitions, crystallization, melting and sublimation. The area under a DTA peak is the enthalpy change and is not affected by the heat capacity of the sample."@en ; + rdfs:comment "Differential thermal analysis (DTA) is a thermoanalytic technique that is similar to differential scanning calorimetry. In DTA, the material under study and an inert reference are made to undergo identical thermal cycles, (i.e., same cooling or heating programme) while recording any temperature difference between sample and reference.[1] This differential temperature is then plotted against time, or against temperature (DTA curve, or thermogram). Changes in the sample, either exothermic or endothermic, can be detected relative to the inert reference. Thus, a DTA curve provides data on the transformations that have occurred, such as glass transitions, crystallization, melting and sublimation. The area under a DTA peak is the enthalpy change and is not affected by the heat capacity of the sample."@en ; rdfs:isDefinedBy : ; rdfs:subClassOf :ThermochemicalTesting ; skos:altLabel "DTA"^^xsd:string ; @@ -8887,8 +8855,7 @@ NOTE 4 A measuring system can be used as a measurement standard."""@en ; :Dilatometry a owl:Class ; rdfs:label "Dilatometry"@en ; - rdfs:comment ""^^xsd:string, - "Dilatometry is a method for characterising the dimensional changes of materials with variation of temperature conditions."@en ; + rdfs:comment "Dilatometry is a method for characterising the dimensional changes of materials with variation of temperature conditions."@en ; rdfs:isDefinedBy : ; rdfs:seeAlso "https://www.lboro.ac.uk/research/lmcc/facilities/dilatometry/#:~:text=Dilatometry%20is%20a%20method%20for,to%20mimic%20an%20industrial%20process."^^xsd:string ; rdfs:subClassOf :CharacterisationTechnique ; @@ -11936,9 +11903,9 @@ ns1:EMMO_8dbaf3ca_8f0d_4c45_92e1_c6d805b83c87 a owl:Class ; rdfs:label "FundamentalFermion"@en ; rdfs:comment "A particle with half odd integer spin (1/2, 3/2, etc...) that follows Fermi-Dirac statistics."@en ; rdfs:isDefinedBy ; - owl:disjointUnionOf ( ns1:EMMO_07bb613c_e8d0_425f_abcc_47c58b14704e ns1:EMMO_8ab3ff9d_35d4_44b7_9d66_7b0b30c40da8 ), - ( ns1:EMMO_124c07b7_38ea_405c_81b1_5c65eee1a41a ns1:EMMO_7773f63a_cd7c_4393_b36b_cd1b8a71565a ns1:EMMO_82d6c4b3_a037_49de_9622_0407af40bdeb ), - ( ns1:EMMO_9226c7af_573f_4762_865c_e3a68a4832dd ns1:EMMO_dad35c10_dd6c_4602_8474_f4ef68517fe9 ) ; + owl:disjointUnionOf ( ns1:EMMO_9226c7af_573f_4762_865c_e3a68a4832dd ns1:EMMO_dad35c10_dd6c_4602_8474_f4ef68517fe9 ), + ( ns1:EMMO_07bb613c_e8d0_425f_abcc_47c58b14704e ns1:EMMO_8ab3ff9d_35d4_44b7_9d66_7b0b30c40da8 ), + ( ns1:EMMO_124c07b7_38ea_405c_81b1_5c65eee1a41a ns1:EMMO_7773f63a_cd7c_4393_b36b_cd1b8a71565a ns1:EMMO_82d6c4b3_a037_49de_9622_0407af40bdeb ) ; skos:prefLabel "FundamentalFermion"@en ; ns1:EMMO_31252f35_c767_4b97_a877_1235076c3e13 "A particle with half odd integer spin (1/2, 3/2, etc...) that follows Fermi-Dirac statistics."@en ; ns1:EMMO_c84c6752_6d64_48cc_9500_e54a3c34898d "https://en.wikipedia.org/wiki/Fermion"@en . @@ -11969,13 +11936,13 @@ ns1:EMMO_8f87e700_99a8_4427_8ffb_e493de05c217 a owl:Class ; rdfs:comment "A positive charged subatomic particle found in the atomic nucleus."@en ; rdfs:isDefinedBy ; rdfs:subClassOf [ a owl:Restriction ; - owl:onClass ns1:EMMO_a4edc1d4_bb38_4897_ba1e_f87e7aa31c5b ; + owl:onClass ns1:EMMO_0a3f04a6_ba3a_49d9_99da_08b0e26f51f0 ; owl:onProperty ns1:EMMO_f68030be_94b8_4c61_a161_886468558054 ; - owl:qualifiedCardinality "1"^^xsd:nonNegativeInteger ], + owl:qualifiedCardinality "2"^^xsd:nonNegativeInteger ], [ a owl:Restriction ; - owl:onClass ns1:EMMO_0a3f04a6_ba3a_49d9_99da_08b0e26f51f0 ; + owl:onClass ns1:EMMO_a4edc1d4_bb38_4897_ba1e_f87e7aa31c5b ; owl:onProperty ns1:EMMO_f68030be_94b8_4c61_a161_886468558054 ; - owl:qualifiedCardinality "2"^^xsd:nonNegativeInteger ] ; + owl:qualifiedCardinality "1"^^xsd:nonNegativeInteger ] ; skos:prefLabel "Proton"@en ; ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "A positive charged subatomic particle found in the atomic nucleus."@en ; ns1:EMMO_c84c6752_6d64_48cc_9500_e54a3c34898d "https://en.wikipedia.org/wiki/Proton"^^xsd:string . @@ -12426,7 +12393,7 @@ ns1:EMMO_bb6febfa_5c6b_43c9_941a_4b6157b703be a owl:ObjectProperty ; ns1:EMMO_bc37743c_37c4_4ec7_9d58_d1aae5567352 a owl:Class ; rdfs:label "Substance"@en ; rdfs:comment "A composite physical object made of fermions (i.e. having mass and occupying space)."^^xsd:string ; - rdfs:isDefinedBy ; + rdfs:isDefinedBy ; rdfs:subClassOf ns1:EMMO_57d977ab_0036_4779_b59a_e47620afdb9c, ns1:EMMO_5b2222df_4da6_442f_8244_96e9e45887d1 ; owl:disjointUnionOf ( ns1:EMMO_660a4964_0333_4663_bc66_e93ef59b0679 ns1:EMMO_8b0923ab_b500_477b_9ce9_8b3a3e4dc4f2 ) ; @@ -13232,7 +13199,7 @@ ns1:EMMO_f895cb83_2280_42e9_9f4c_047273e70d3c a owl:Class ; ns1:EMMO_f8bd64d5_5d3e_4ad4_a46e_c30714fecb7f a owl:Class ; rdfs:label "Integer"@en ; rdfs:comment "An integer number."@en ; - rdfs:isDefinedBy ; + rdfs:isDefinedBy ; rdfs:subClassOf [ a owl:Restriction ; owl:allValuesFrom xsd:integer ; owl:onProperty ns1:EMMO_faf79f53_749d_40b2_807c_d34244c192f4 ], @@ -13384,12 +13351,8 @@ ns1:emmo_fd2aa864_eef7_4c3d_8243_9ea832d9df3e a owl:Class ; :Amperometry a owl:Class ; rdfs:label "Amperometry"@en ; - rdfs:comment ""^^xsd:string, - "Amperometry can be distinguished from voltammetry by the parameter being controlled (electrode potential E) and the parameter being measured (electrode current I which is usually a function of time – see chronoamperometry)."@en, - "In a non-stirred solution, a diffusion-limited current is usually measured, which is propor-tional to the concentration of an electroactive analyte."@en, - "The amperometric method provides the ability to distinguish selectively between a number of electroactive species in solution by judicious selection of the applied potential and/or choice of electrode material."@en, - "The current is usually faradaic and the applied potential is usually constant."@en, - "The integral of current with time is the electric charge, which may be related to the amount of substance reacted by Faraday’s laws of electrolysis."@en ; + rdfs:comment "Amperometry can be distinguished from voltammetry by the parameter being controlled (electrode potential E) and the parameter being measured (electrode current I which is usually a function of time – see chronoamperometry). In a non-stirred solution, a diffusion-limited current is usually measured, which is propor-tional to the concentration of an electroactive analyte. The current is usually faradaic and the applied potential is usually constant. The integral of current with time is the electric charge, which may be related to the amount of substance reacted by Faraday’s laws of electrolysis."@en, + "The amperometric method provides the ability to distinguish selectively between a number of electroactive species in solution by judicious selection of the applied potential and/or choice of electrode material."@en ; rdfs:isDefinedBy : ; rdfs:subClassOf :ElectrochemicalTesting ; skos:prefLabel "Amperometry"@en ; @@ -13428,8 +13391,7 @@ ns1:emmo_fd2aa864_eef7_4c3d_8243_9ea832d9df3e a owl:Class ; :CharacterisationProperty a owl:Class ; rdfs:label "CharacterisationProperty"@en ; - rdfs:comment ""^^xsd:string, - "The characterisation property is the investigate property or behaviour of a sample. It is derived from the secondary data, usually after classification or quantification (manually or by a model)."@en ; + rdfs:comment "The characterisation property is the investigate property or behaviour of a sample. It is derived from the secondary data, usually after classification or quantification (manually or by a model)."@en ; rdfs:isDefinedBy : ; rdfs:subClassOf ns1:EMMO_873b0ab3_88e6_4054_b901_5531e01f14a4, :SecondaryData ; @@ -13438,8 +13400,7 @@ ns1:emmo_fd2aa864_eef7_4c3d_8243_9ea832d9df3e a owl:Class ; :CharacterisationSoftware a owl:Class ; rdfs:label "CharacterisationSoftware"^^xsd:string ; - rdfs:comment ""^^xsd:string, - "A software application to process characterisation data"@en ; + rdfs:comment "A software application to process characterisation data"@en ; rdfs:isDefinedBy : ; rdfs:subClassOf ns1:EMMO_3b031fa9_8623_4ea5_8b57_bcafb70c5c8b ; skos:prefLabel "CharacterisationSoftware"^^xsd:string ; @@ -13448,8 +13409,7 @@ ns1:emmo_fd2aa864_eef7_4c3d_8243_9ea832d9df3e a owl:Class ; :CompressionTesting a owl:Class ; rdfs:label "CompressionTesting"@en ; - rdfs:comment ""^^xsd:string, - "Compression tests characterize material and product strength and stiffness under applied crushing loads. These tests are typically conducted by applying compressive pressure to a test specimen using platens or specialized fixtures with a testing machine that produces compressive loads."@en ; + rdfs:comment "Compression tests characterize material and product strength and stiffness under applied crushing loads. These tests are typically conducted by applying compressive pressure to a test specimen using platens or specialized fixtures with a testing machine that produces compressive loads."@en ; rdfs:isDefinedBy : ; rdfs:subClassOf :MechanicalTesting ; skos:prefLabel "CompressionTesting"@en ; @@ -13457,22 +13417,19 @@ ns1:emmo_fd2aa864_eef7_4c3d_8243_9ea832d9df3e a owl:Class ; :Conductometry a owl:Class ; rdfs:label "Conductometry"@en ; - rdfs:comment ""^^xsd:string, - "The conductivity of a solution depends on the concentration and nature of ions present."@en, - "measurement principle in which the electric conductivity of a solution is measured"@en ; + rdfs:comment "Measurement principle in which the electric conductivity of a solution is measured. The conductivity of a solution depends on the concentration and nature of ions present."@en ; rdfs:isDefinedBy : ; rdfs:subClassOf :ElectrochemicalTesting ; skos:prefLabel "Conductometry"@en ; ns1:EMMO_26bf1bef_d192_4da6_b0eb_d2209698fb54 "https://www.wikidata.org/wiki/Q901180"^^xsd:string ; - ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "measurement principle in which the electric conductivity of a solution is measured"@en ; + ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "Measurement principle in which the electric conductivity of a solution is measured. The conductivity of a solution depends on the concentration and nature of ions present."@en ; ns1:EMMO_b432d2d5_25f4_4165_99c5_5935a7763c1a "Monitoring of the purity of deionized water."@en ; ns1:EMMO_c84c6752_6d64_48cc_9500_e54a3c34898d "https://en.wikipedia.org/wiki/Conductometry"@en ; ns1:EMMO_fe015383_afb3_44a6_ae86_043628697aa2 "https://doi.org/10.1515/pac-2018-0109"@en . :CreepTesting a owl:Class ; rdfs:label "CreepTesting"@en ; - rdfs:comment ""^^xsd:string, - "The creep test is a destructive materials testing method for determination of the long-term strength and heat resistance of a material. When running a creep test, the specimen is subjected to increased temperature conditions for an extended period of time and loaded with a constant tensile force or tensile stress."@en ; + rdfs:comment "The creep test is a destructive materials testing method for determination of the long-term strength and heat resistance of a material. When running a creep test, the specimen is subjected to increased temperature conditions for an extended period of time and loaded with a constant tensile force or tensile stress."@en ; rdfs:isDefinedBy : ; rdfs:subClassOf :MechanicalTesting ; skos:prefLabel "CreepTesting"@en ; @@ -13480,39 +13437,32 @@ ns1:emmo_fd2aa864_eef7_4c3d_8243_9ea832d9df3e a owl:Class ; :CyclicChronopotentiometry a owl:Class ; rdfs:label "CyclicChronopotentiometry"@en ; - rdfs:comment ""^^xsd:string, - "chronopotentiometry where the change in applied current undergoes a cyclic current reversal"@en ; + rdfs:comment "Chronopotentiometry where the change in applied current undergoes a cyclic current reversal."@en ; rdfs:isDefinedBy : ; rdfs:subClassOf :Chronopotentiometry ; skos:prefLabel "CyclicChronopotentiometry"@en ; - ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "chronopotentiometry where the change in applied current undergoes a cyclic current reversal"@en . + ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "Chronopotentiometry where the change in applied current undergoes a cyclic current reversal."@en . :DCPolarography a owl:Class ; rdfs:label "DCPolarography"@en ; - rdfs:comment ""^^xsd:string, - "If the whole scan is performed on a single growing drop, the technique should be called single drop scan voltammetry. The term polarography in this context is discouraged."@en, - "This is the oldest variant of polarographic techniques, introduced by Jaroslav Heyrovský (1890 – 1967)."@en, - "Usually the drop time is between 1 and 5 s and the pseudo-steady-state wave-shaped dependence on potential is called a polarogram. If the limiting current is controlled by dif- fusion, it is expressed by the Ilkovich equation."@en, - "linear scan voltammetry with slow scan rate in which a dropping mercury electrode is used as the working electrode"@en ; + rdfs:comment "Linear scan voltammetry with slow scan rate in which a dropping mercury electrode is used as the working electrode. If the whole scan is performed on a single growing drop, the technique should be called single drop scan voltammetry. The term polarography in this context is discouraged. This is the oldest variant of polarographic techniques, introduced by Jaroslav Heyrovský (1890 – 1967). Usually the drop time is between 1 and 5 s and the pseudo-steady-state wave-shaped dependence on potential is called a polarogram. If the limiting current is controlled by diffusion, it is expressed by the Ilkovich equation."@en ; rdfs:isDefinedBy : ; rdfs:subClassOf :Voltammetry ; skos:prefLabel "DCPolarography"@en ; - ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "linear scan voltammetry with slow scan rate in which a dropping mercury electrode is used as the working electrode"@en ; + ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "Linear scan voltammetry with slow scan rate in which a dropping mercury electrode is used as the working electrode. If the whole scan is performed on a single growing drop, the technique should be called single drop scan voltammetry. The term polarography in this context is discouraged. This is the oldest variant of polarographic techniques, introduced by Jaroslav Heyrovský (1890 – 1967). Usually the drop time is between 1 and 5 s and the pseudo-steady-state wave-shaped dependence on potential is called a polarogram. If the limiting current is controlled by diffusion, it is expressed by the Ilkovich equation."@en ; ns1:EMMO_fe015383_afb3_44a6_ae86_043628697aa2 "https://doi.org/10.1515/pac-2018-0109"@en . :DataAcquisitionRate a owl:Class ; rdfs:label "DataAcquisitionRate"@en ; - rdfs:comment ""^^xsd:string, - "Quantify the raw data acquisition rate, if applicable."@en ; + rdfs:comment "Quantifies the raw data acquisition rate, if applicable."@en ; rdfs:isDefinedBy : ; rdfs:subClassOf ns1:EMMO_b7bcff25_ffc3_474e_9ab5_01b1664bd4ba ; skos:prefLabel "DataAcquisitionRate"@en ; - ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "Quantify the raw data acquisition rate, if applicable."@en . + ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "Quantifies the raw data acquisition rate, if applicable."@en . :DataAnalysis a owl:Class ; rdfs:label "DataAnalysis"@en ; - rdfs:comment ""^^xsd:string, - "Data processing activities performed on the secondary data to determine the characterisation property (e.g. classification, quantification), which can be performed manually or exploiting a model."@en ; + rdfs:comment "Data processing activities performed on the secondary data to determine the characterisation property (e.g. classification, quantification), which can be performed manually or exploiting a model."@en ; rdfs:isDefinedBy : ; rdfs:subClassOf ns1:EMMO_1c7f2dfe_0db4_4bf6_a0f6_853054a34ead ; skos:prefLabel "DataAnalysis"@en ; @@ -13520,16 +13470,14 @@ ns1:emmo_fd2aa864_eef7_4c3d_8243_9ea832d9df3e a owl:Class ; :DataProcessingThroughCalibration a owl:Class ; rdfs:label "DataProcessingThroughCalibration"@en ; - rdfs:comment ""^^xsd:string, - "Describes how raw data are corrected and/or modified through calibrations."@en ; + rdfs:comment "Describes how raw data are corrected and/or modified through calibrations."@en ; rdfs:isDefinedBy : ; skos:prefLabel "DataProcessingThroughCalibration"@en ; ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "Describes how raw data are corrected and/or modified through calibrations."@en . :DataQuality a owl:Class ; rdfs:label "DataQuality"@en ; - rdfs:comment ""^^xsd:string, - "Evaluation of quality indicators to determine how well suited a data set is to be used for the characterisation of a material."@en ; + rdfs:comment "Evaluation of quality indicators to determine how well suited a data set is to be used for the characterisation of a material."@en ; rdfs:isDefinedBy : ; skos:prefLabel "DataQuality"@en ; ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "Evaluation of quality indicators to determine how well suited a data set is to be used for the characterisation of a material."@en ; @@ -13537,8 +13485,7 @@ ns1:emmo_fd2aa864_eef7_4c3d_8243_9ea832d9df3e a owl:Class ; :DifferentialLinearPulseVoltammetry a owl:Class ; rdfs:label "DifferentialLinearPulseVoltammetry"@en ; - rdfs:comment ""^^xsd:string, - "Differential Pulse Voltammetry in which small potential pulses are superimposed onto a linearly varying potential."@en ; + rdfs:comment "Differential Pulse Voltammetry in which small potential pulses are superimposed onto a linearly varying potential."@en ; rdfs:isDefinedBy : ; rdfs:subClassOf :DifferentialPulseVoltammetry ; skos:prefLabel "DifferentialLinearPulseVoltammetry"@en ; @@ -13546,8 +13493,7 @@ ns1:emmo_fd2aa864_eef7_4c3d_8243_9ea832d9df3e a owl:Class ; :DifferentialStaircasePulseVoltammetry a owl:Class ; rdfs:label "DifferentialStaircasePulseVoltammetry"@en ; - rdfs:comment ""^^xsd:string, - "Differential Pulse Voltammetry in which small potential pulses are superimposed onto a staircase potential ramp."@en ; + rdfs:comment "Differential Pulse Voltammetry in which small potential pulses are superimposed onto a staircase potential ramp."@en ; rdfs:isDefinedBy : ; rdfs:subClassOf :DifferentialPulseVoltammetry ; skos:prefLabel "DifferentialStaircasePulseVoltammetry"@en ; @@ -14196,7 +14142,7 @@ ns1:EMMO_21205421_5783_4d3e_81e5_10c5d894a88a a owl:Class ; rdfs:comment "Any constitutionally or isotopically distinct atom, molecule, ion, ion pair, radical, radical ion, complex, conformer etc., identifiable as a separately distinguishable entity that can undergo a chemical reaction."@en, """Molecular entity is used as a general term for singular entities, irrespective of their nature, while chemical species stands for sets or ensembles of molecular entities. Note that the name of a compound may refer to the respective molecular entity or to the chemical species,"""@en ; - rdfs:isDefinedBy , + rdfs:isDefinedBy , "https://goldbook.iupac.org/terms/view/M03986"@en ; rdfs:subClassOf ns1:EMMO_5b2222df_4da6_442f_8244_96e9e45887d1, ns1:EMMO_8b1367d6_0133_4b56_acc1_fa8b058169e3 ; @@ -14414,14 +14360,14 @@ ns1:EMMO_463bcfda_867b_41d9_a967_211d4d437cfb a owl:Class ; "An 'observation' that results in a quantitative comparison of a 'property' of an 'object' with a standard reference based on a well defined mesurement procedure."@en ; rdfs:isDefinedBy ; rdfs:subClassOf [ a owl:Restriction ; - owl:onProperty ns1:EMMO_c4bace1d_4db0_4cd3_87e9_18122bae2840 ; - owl:someValuesFrom ns1:EMMO_0f6f0120_c079_4d95_bb11_4ddee05e530e ], - [ a owl:Restriction ; owl:onProperty ns1:EMMO_35c29eb6_f57e_48d8_85af_854f9e926e77 ; owl:someValuesFrom ns1:EMMO_0f6f0120_c079_4d95_bb11_4ddee05e530e ], [ a owl:Restriction ; owl:onProperty ns1:EMMO_35c29eb6_f57e_48d8_85af_854f9e926e77 ; owl:someValuesFrom ns1:EMMO_7dea2572_ab42_45bd_9fd7_92448cec762a ], + [ a owl:Restriction ; + owl:onProperty ns1:EMMO_c4bace1d_4db0_4cd3_87e9_18122bae2840 ; + owl:someValuesFrom ns1:EMMO_0f6f0120_c079_4d95_bb11_4ddee05e530e ], ns1:EMMO_3b19eab4_79be_4b02_bdaf_ecf1f0067a68, ns1:EMMO_472a0ca2_58bf_4618_b561_6fe68bd9fd49 ; skos:prefLabel "Measurement"@en ; @@ -14639,7 +14585,7 @@ ns1:EMMO_57ba1bf0_4314_432c_a9bb_6a6720c8dab5 a owl:Class ; ns1:EMMO_57d977ab_0036_4779_b59a_e47620afdb9c a owl:Class ; rdfs:label "CompositePhysicalObject"@en ; rdfs:comment "The class of physical objects possessing a structure that is larger than a single composite particle, for which its bosonic or fermionic nature is undetermined."^^xsd:string ; - rdfs:isDefinedBy ; + rdfs:isDefinedBy ; skos:prefLabel "CompositePhysicalObject"@en ; ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "The class of physical objects possessing a structure that is larger than a single composite particle, for which its bosonic or fermionic nature is undetermined."^^xsd:string . @@ -14734,7 +14680,7 @@ ns1:EMMO_68c0e0cd_6afd_4eb7_9dfa_91c2462002c9 a owl:Class ; ns1:EMMO_6e9cb807_fc68_4bcf_b3ba_5fccc887c644 a owl:Class ; rdfs:label "OrdinaryMatter"@en ; rdfs:comment "Matter composed of only matter particles, excluding anti-matter particles."@en ; - rdfs:isDefinedBy ; + rdfs:isDefinedBy ; owl:disjointWith ns1:EMMO_f13672a3_59cc_40ed_8def_65009a8f74e6 ; skos:prefLabel "OrdinaryMatter"@en ; ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "Matter composed of only matter particles, excluding anti-matter particles."@en . @@ -15097,7 +15043,7 @@ ns1:EMMO_9bb271f2_80a1_481a_ba78_368c4dccc235 a owl:Class ; ns1:EMMO_9be5fcc4_0d8b_481d_b984_6338d4b55588 a owl:Class ; rdfs:label "Measurer"@en ; rdfs:comment "An observer that makes use of a measurement tool and provides a quantitative property."@en ; - rdfs:isDefinedBy ; + rdfs:isDefinedBy ; rdfs:subClassOf ns1:EMMO_ea67caa5_2609_4e91_98ae_81103f2d5c25 ; skos:prefLabel "Measurer"@en ; ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "An observer that makes use of a measurement tool and provides a quantitative property."@en . @@ -15773,8 +15719,7 @@ ns1:EMMO_fe63194f_7c04_4dbd_a244_524b38b6699b a owl:AsymmetricProperty, :CharacterisationProcedureValidation a owl:Class ; rdfs:label "CharacterisationProcedureValidation"@en ; - rdfs:comment ""^^xsd:string, - "Describes why the characterization procedure was chosen and deemed to be the most useful for the sample."@en ; + rdfs:comment "Describes why the characterization procedure was chosen and deemed to be the most useful for the sample."@en ; rdfs:isDefinedBy : ; rdfs:subClassOf ns1:EMMO_909415d1_7c43_4d5e_bbeb_7e1910159f66 ; skos:prefLabel "CharacterisationProcedureValidation"@en ; @@ -15789,8 +15734,7 @@ ns1:EMMO_fe63194f_7c04_4dbd_a244_524b38b6699b a owl:AsymmetricProperty, :Chromatography a owl:Class ; rdfs:label "Chromatography"@en ; - rdfs:comment ""^^xsd:string, - "In chemical analysis, chromatography is a laboratory technique for the separation of a mixture into its components."@en ; + rdfs:comment "In chemical analysis, chromatography is a laboratory technique for the separation of a mixture into its components."@en ; rdfs:isDefinedBy : ; rdfs:subClassOf :CharacterisationTechnique ; skos:prefLabel "Chromatography"@en ; @@ -15799,8 +15743,7 @@ ns1:EMMO_fe63194f_7c04_4dbd_a244_524b38b6699b a owl:AsymmetricProperty, :Detector a owl:Class ; rdfs:label "Detector"@en ; - rdfs:comment ""^^xsd:string, - "Physical device (or the chain of devices) that is used to measure, quantify and store the signal after its interaction with the sample."@en ; + rdfs:comment "Physical device (or the chain of devices) that is used to measure, quantify and store the signal after its interaction with the sample."@en ; rdfs:isDefinedBy : ; rdfs:subClassOf :CharacterisationHardware ; skos:prefLabel "Detector"@en ; @@ -15810,17 +15753,13 @@ ns1:EMMO_fe63194f_7c04_4dbd_a244_524b38b6699b a owl:AsymmetricProperty, :DifferentialPulseVoltammetry a owl:Class ; rdfs:label "DifferentialPulseVoltammetry"@en ; - rdfs:comment ""^^xsd:string, - "Differential pulse polarography is differential pulse voltammetry in which a dropping mercury electrode is used as the working electrode. A pulse is applied before the mechani- cally enforced end of the drop and the current is sampled twice: just before the onset of the pulse and just before its end. The pulse width is usually 10 to 20 % of the drop life. The drop dislodgement is synchronized with current sampling, which is carried out as in DPV."@en, - "The ratio of faradaic current to charging current is enhanced and the negative influence of charging current is partially eliminated in the same way as in normal pulse voltammetry (NPV). Moreover, subtraction of the charging current sampled before the application of the pulse further decreases its negative influence. Due to the more enhanced signal (faradaic current) to noise (charging current) ratio, the limit of detection is lower than with NPV."@en, - "The sensitivity of DPV depends on the reversibility of the electrode reaction of the analyte."@en, - "voltammetry in which small potential pulses (constant height 10 to 100 mV, constant width 10 to 100 ms) are superimposed onto a linearly varying potential or onto a staircase potential ramp. The current is sampled just before the onset of the pulse (e.g. 10 to 20 ms) and for the same sampling time just before the end of the pulse. The difference between the two sampled currents is plotted versus the potential applied before the pulse. Thus, a differential pulse voltammogram is peak-shaped"@en ; + rdfs:comment "Voltammetry in which small potential pulses (constant height 10 to 100 mV, constant width 10 to 100 ms) are superimposed onto a linearly varying potential or onto a staircase potential ramp. The current is sampled just before the onset of the pulse (e.g. 10 to 20 ms) and for the same sampling time just before the end of the pulse. The difference between the two sampled currents is plotted versus the potential applied before the pulse. Thus, a differential pulse voltammogram is peak-shaped. Differential pulse polarography is differential pulse voltammetry in which a dropping mercury electrode is used as the working electrode. A pulse is applied before the mechani- cally enforced end of the drop and the current is sampled twice: just before the onset of the pulse and just before its end. The pulse width is usually 10 to 20 % of the drop life. The drop dislodgement is synchronized with current sampling, which is carried out as in DPV. The ratio of faradaic current to charging current is enhanced and the negative influence of charging current is partially eliminated in the same way as in normal pulse voltammetry (NPV). Moreover, subtraction of the charging current sampled before the application of the pulse further decreases its negative influence. Due to the more enhanced signal (faradaic current) to noise (charging current) ratio, the limit of detection is lower than with NPV. The sensitivity of DPV depends on the reversibility of the electrode reaction of the analyte."@en ; rdfs:isDefinedBy : ; rdfs:subClassOf :Voltammetry ; skos:altLabel "DPV"@en ; skos:prefLabel "DifferentialPulseVoltammetry"@en ; ns1:EMMO_26bf1bef_d192_4da6_b0eb_d2209698fb54 "https://www.wikidata.org/wiki/Q5275361"^^xsd:string ; - ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "voltammetry in which small potential pulses (constant height 10 to 100 mV, constant width 10 to 100 ms) are superimposed onto a linearly varying potential or onto a staircase potential ramp. The current is sampled just before the onset of the pulse (e.g. 10 to 20 ms) and for the same sampling time just before the end of the pulse. The difference between the two sampled currents is plotted versus the potential applied before the pulse. Thus, a differential pulse voltammogram is peak-shaped"@en ; + ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "Voltammetry in which small potential pulses (constant height 10 to 100 mV, constant width 10 to 100 ms) are superimposed onto a linearly varying potential or onto a staircase potential ramp. The current is sampled just before the onset of the pulse (e.g. 10 to 20 ms) and for the same sampling time just before the end of the pulse. The difference between the two sampled currents is plotted versus the potential applied before the pulse. Thus, a differential pulse voltammogram is peak-shaped. Differential pulse polarography is differential pulse voltammetry in which a dropping mercury electrode is used as the working electrode. A pulse is applied before the mechani- cally enforced end of the drop and the current is sampled twice: just before the onset of the pulse and just before its end. The pulse width is usually 10 to 20 % of the drop life. The drop dislodgement is synchronized with current sampling, which is carried out as in DPV. The ratio of faradaic current to charging current is enhanced and the negative influence of charging current is partially eliminated in the same way as in normal pulse voltammetry (NPV). Moreover, subtraction of the charging current sampled before the application of the pulse further decreases its negative influence. Due to the more enhanced signal (faradaic current) to noise (charging current) ratio, the limit of detection is lower than with NPV. The sensitivity of DPV depends on the reversibility of the electrode reaction of the analyte."@en ; ns1:EMMO_c84c6752_6d64_48cc_9500_e54a3c34898d "https://en.wikipedia.org/wiki/Differential_pulse_voltammetry"@en ; ns1:EMMO_fe015383_afb3_44a6_ae86_043628697aa2 "https://doi.org/10.1515/pac-2018-0109"@en . @@ -16006,11 +15945,11 @@ ns1:EMMO_0527413c_b286_4e9c_b2d0_03fb2a038dee a owl:Class ; On the contrary, the interpreter is an agent recognized by the ontologist. The semiotic branch of the EMMO is the tool used by the ontologist to represent an interpreter's semiotic activity."""@en ; rdfs:isDefinedBy ; rdfs:subClassOf [ a owl:Restriction ; - owl:onProperty ns1:EMMO_f68030be_94b8_4c61_a161_886468558054 ; - owl:someValuesFrom ns1:EMMO_054af807_85cd_4a13_8eba_119dfdaaf38b ], - [ a owl:Restriction ; owl:onProperty [ owl:inverseOf ns1:EMMO_dc57d998_23db_4d8e_b2cd_f346b195b846 ] ; - owl:someValuesFrom ns1:EMMO_008fd3b2_4013_451f_8827_52bceab11841 ] ; + owl:someValuesFrom ns1:EMMO_008fd3b2_4013_451f_8827_52bceab11841 ], + [ a owl:Restriction ; + owl:onProperty ns1:EMMO_f68030be_94b8_4c61_a161_886468558054 ; + owl:someValuesFrom ns1:EMMO_054af807_85cd_4a13_8eba_119dfdaaf38b ] ; owl:equivalentClass [ a owl:Class ; owl:unionOf ( ns1:EMMO_19608340_178c_4bfd_bd4d_0d3b935c6fec ns1:EMMO_2d72e38c_d587_437f_98f6_f2718fb130eb ns1:EMMO_36a4c1ca_5085_49ca_9e13_4c70d00c50a5 ) ] ; skos:prefLabel "Interpreter"@en ; @@ -16210,7 +16149,7 @@ ns1:EMMO_22496460_c849_4bd7_8be0_9a1202506f18 a owl:Class ; ns1:EMMO_2337e25c_3c60_43fc_a8f9_b11a3f974291 a owl:ObjectProperty ; rdfs:label "semiotical"@en ; rdfs:comment "The generic EMMO semiotical relation."@en ; - rdfs:isDefinedBy ; + rdfs:isDefinedBy ; rdfs:subPropertyOf ns1:EMMO_ec2472ae_cf4a_46a5_8555_1556f5a6c3c5 ; skos:prefLabel "semiotical"@en ; ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "The generic EMMO semiotical relation."@en . @@ -16250,7 +16189,7 @@ ns1:EMMO_28fbea28_2204_4613_87ff_6d877b855fcd a owl:Class ; See Shape4x3Matrix as an example."""@en, "Arrays are ordered mathematical objects who's elementary spatial parts are numbers. Their dimensionality is constructed with spatial direct parthood, where 1-dimensional arrays have spatial direct parts Number and n-dimensional array have spatial direct parts (n-1)-dimensional arrays."@en, "Arrays are ordered objects, since they are a subclasses of Arrangement."@en ; - rdfs:isDefinedBy ; + rdfs:isDefinedBy ; rdfs:subClassOf ns1:EMMO_54ee6b5e_5261_44a8_86eb_5717e7fdb9d0 ; skos:prefLabel "Array"@en ; ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "Arrays are ordered mathematical objects who's elementary spatial parts are numbers. Their dimensionality is constructed with spatial direct parthood, where 1-dimensional arrays have spatial direct parts Number and n-dimensional array have spatial direct parts (n-1)-dimensional arrays."@en ; @@ -16400,10 +16339,10 @@ ns1:EMMO_47bf3513_4ae6_4858_9c45_76e23230d68d a owl:Class ; rdfs:isDefinedBy ; rdfs:subClassOf [ a owl:Restriction ; owl:onProperty ns1:EMMO_dc57d998_23db_4d8e_b2cd_f346b195b846 ; - owl:someValuesFrom ns1:EMMO_2d72e38c_d587_437f_98f6_f2718fb130eb ], + owl:someValuesFrom ns1:EMMO_35d2e130_6e01_41ed_94f7_00b333d46cf9 ], [ a owl:Restriction ; owl:onProperty ns1:EMMO_dc57d998_23db_4d8e_b2cd_f346b195b846 ; - owl:someValuesFrom ns1:EMMO_35d2e130_6e01_41ed_94f7_00b333d46cf9 ], + owl:someValuesFrom ns1:EMMO_2d72e38c_d587_437f_98f6_f2718fb130eb ], [ a owl:Restriction ; owl:onProperty ns1:EMMO_dc57d998_23db_4d8e_b2cd_f346b195b846 ; owl:someValuesFrom ns1:EMMO_c9805ac9_a943_4be4_ac4b_6da64ba36c73 ] ; @@ -16572,13 +16511,13 @@ ns1:EMMO_7cdc375d_d371_4d78_acd5_d51732f52126 a owl:Class ; rdfs:isDefinedBy ; rdfs:subClassOf [ a owl:Restriction ; owl:onProperty ns1:EMMO_dc57d998_23db_4d8e_b2cd_f346b195b846 ; - owl:someValuesFrom ns1:EMMO_d7788d1a_020d_4c78_85a1_13563fcec168 ], + owl:someValuesFrom ns1:EMMO_19608340_178c_4bfd_bd4d_0d3b935c6fec ], [ a owl:Restriction ; owl:onProperty ns1:EMMO_dc57d998_23db_4d8e_b2cd_f346b195b846 ; - owl:someValuesFrom ns1:EMMO_19608340_178c_4bfd_bd4d_0d3b935c6fec ], + owl:someValuesFrom ns1:EMMO_881606d0_6f2f_4947_bc8b_75c5b7b2b688 ], [ a owl:Restriction ; owl:onProperty ns1:EMMO_dc57d998_23db_4d8e_b2cd_f346b195b846 ; - owl:someValuesFrom ns1:EMMO_881606d0_6f2f_4947_bc8b_75c5b7b2b688 ] ; + owl:someValuesFrom ns1:EMMO_d7788d1a_020d_4c78_85a1_13563fcec168 ] ; skos:altLabel "IconSemiosis"@en ; skos:prefLabel "Cognition"@en . @@ -16771,7 +16710,7 @@ The unity criterion beyond the definition of a causal structure (the most genera - is made of at least two quantums (a structure is not a simple entity) - all quantum parts form a causally connected graph"""@en, "The union of CausalPath and CausalSystem classes."@en ; - rdfs:isDefinedBy ; + rdfs:isDefinedBy ; owl:disjointUnionOf [ a rdf:List ; rdf:first ns1:EMMO_0f795e3e_c602_4577_9a43_d5a231aa1360 ; rdf:rest [ a rdf:List ; @@ -16857,7 +16796,7 @@ ns1:EMMO_e97af6ec_4371_4bbc_8936_34b76e33302f a owl:Class ; ns1:EMMO_ea67caa5_2609_4e91_98ae_81103f2d5c25 a owl:Class ; rdfs:label "Observer"@en ; rdfs:comment "A characteriser that declares a property for an object through the specific interaction required by the property definition."@en ; - rdfs:isDefinedBy ; + rdfs:isDefinedBy ; skos:prefLabel "Observer"@en ; ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "A characteriser that declares a property for an object through the specific interaction required by the property definition."@en . @@ -16927,19 +16866,19 @@ ns1:EMMO_f8b20fd2_08b9_4368_b786_156e11d1cec8 a owl:Class ; :DataPostProcessing a owl:Class ; rdfs:label "DataPostProcessing"@en ; - rdfs:comment "Analysis, that allows one to calculate the final material property from the calibrated primary data."^^xsd:string ; + rdfs:comment "Analysis, that allows one to calculate the final material property from the calibrated primary data."@en ; rdfs:isDefinedBy : ; rdfs:subClassOf ns1:EMMO_1c7f2dfe_0db4_4bf6_a0f6_853054a34ead ; skos:prefLabel "DataPostProcessing"@en ; - ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "Analysis, that allows one to calculate the final material property from the calibrated primary data."^^xsd:string . + ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "Analysis, that allows one to calculate the final material property from the calibrated primary data."@en . :DataPreparation a owl:Class ; rdfs:label "DataPreparation"@en ; - rdfs:comment "Data preparation is the process of manipulating (or pre-processing) data (which may come from disparate data sources) to improve their quality or reduce bias in subsequent analysis."^^xsd:string ; + rdfs:comment "Data preparation is the process of manipulating (or pre-processing) data (which may come from disparate data sources) to improve their quality or reduce bias in subsequent analysis."@en ; rdfs:isDefinedBy : ; rdfs:subClassOf ns1:EMMO_1c7f2dfe_0db4_4bf6_a0f6_853054a34ead ; skos:prefLabel "DataPreparation"@en ; - ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "Data preparation is the process of manipulating (or pre-processing) data (which may come from disparate data sources) to improve their quality or reduce bias in subsequent analysis."^^xsd:string . + ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "Data preparation is the process of manipulating (or pre-processing) data (which may come from disparate data sources) to improve their quality or reduce bias in subsequent analysis."@en . :MeasurementDataPostProcessing a owl:Class ; rdfs:label "MeasurementDataPostProcessing"@en ; @@ -16999,7 +16938,7 @@ foaf:Person a owl:Class ; ns1:EMMO_06658d8d_dcde_4fc9_aae1_17f71c0bcdec a owl:Class ; rdfs:label "Vector"@en ; rdfs:comment "1-dimensional array who's spatial direct parts are numbers."@en ; - rdfs:isDefinedBy ; + rdfs:isDefinedBy ; rdfs:subClassOf [ a owl:Restriction ; owl:onProperty ns1:EMMO_b2282816_b7a3_44c6_b2cb_3feff1ceb7fe ; owl:someValuesFrom ns1:EMMO_21f56795_ee72_4858_b571_11cfaa59c1a8 ], @@ -17096,7 +17035,7 @@ In the EMMO abstract entities do not exists, and numbers are simply defined by o Or alternatively, an integer numeral may also stands for a set of a specific cardinality (e.g. 3 stands for a set of three apples). Rational and real numbers are simply a syntactic arrangment of integers (digits, in decimal system). The fact that you can't give a name to a number without using a numeral or, in case of positive integers, without referring to a real world objects set with specific cardinality, suggests that the abstract concept of number is not a concept that can be practically used. For these reasons, the EMMO will consider numerals and numbers as the same concept."""@en ; - rdfs:isDefinedBy ; + rdfs:isDefinedBy ; rdfs:subClassOf ns1:EMMO_4ce76d7f_03f8_45b6_9003_90052a79bfaa, ns1:EMMO_a1083d0a_c1fb_471f_8e20_a98f881ad527 ; skos:altLabel "Numeral"@en ; @@ -17175,7 +17114,7 @@ ns1:EMMO_38b579de_4331_40e0_803d_09efa298e726 a owl:Class ; """It is natural to define entities made or more than one smaller parts according to some unity criteria. One of the most general one applicable to causal systems is to ask that all the quantum parts of the system are bonded to the rest. In other words, causal convexity excludes all quantums that leave the system (no more interacting), or that are not yet part of it (not yet interacting). So, a photon leaving a body is not part of the body as convex system, while a photon the is carrier of electromagnetic interaction between two molecular parts of the body, is part of the convex body."""@en ; - rdfs:isDefinedBy ; + rdfs:isDefinedBy ; owl:disjointUnionOf ( ns1:EMMO_8b1367d6_0133_4b56_acc1_fa8b058169e3 ns1:EMMO_57d977ab_0036_4779_b59a_e47620afdb9c ) ; skos:prefLabel "PhysicalObject"@en ; ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "A CausalSystem whose quantum parts are all bonded to the rest of the system."@en ; @@ -17225,7 +17164,7 @@ ns1:EMMO_3ecff38b_b3cf_4a78_b49f_8580abf8715b a owl:Class ; ns1:EMMO_4a1c73f1_b6f5_4d10_a3a6_5de90bac7cd0 a owl:Class ; rdfs:label "Estimator"@en ; rdfs:comment "A characteriser that declares a property for an object without actually interact with it with the specific interaction required by the property definition (i.e. infer a property from other properties)."@en ; - rdfs:isDefinedBy ; + rdfs:isDefinedBy ; skos:prefLabel "Estimator"@en ; ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "A characteriser that declares a property for an object without actually interact with it with the specific interaction required by the property definition (i.e. infer a property from other properties)."@en . @@ -17527,7 +17466,7 @@ ns1:EMMO_b6292331_94af_4f00_976b_ea55960c2f1c a owl:DatatypeProperty ; ns1:EMMO_bafc17b5_9be4_4823_8bbe_ab4e90b6738c a owl:Class ; rdfs:label "IntentionalProcess"@en ; rdfs:comment "A process occurring with the active participation of an agent that drives the process according to a specific objective (intention)."@en ; - rdfs:isDefinedBy ; + rdfs:isDefinedBy ; rdfs:subClassOf [ a owl:Restriction ; owl:onProperty ns1:EMMO_cd24eb82_a11c_4a31_96ea_32f870c5580a ; owl:someValuesFrom ns1:EMMO_c130614a_2985_476d_a7ed_8a137847703c ], @@ -17558,12 +17497,12 @@ ns1:EMMO_c6d4a5e0_7e95_44df_a6db_84ee0a8bbc8e a owl:Class ; rdfs:comment "A measurement unit that is made of a metric prefix and a unit symbol."@en ; rdfs:isDefinedBy ; rdfs:subClassOf [ a owl:Restriction ; - owl:onClass ns1:EMMO_216f448e_cdbc_4aeb_a529_7a5fe7fc38bb ; - owl:onProperty ns1:EMMO_d4e0a0ab_2f67_4f87_a0db_b544e6dceed4 ; - owl:qualifiedCardinality "1"^^xsd:nonNegativeInteger ], - [ a owl:Restriction ; owl:onClass ns1:EMMO_442bd91e_a724_4e9f_89c1_18423016fb75 ; owl:onProperty ns1:EMMO_4be0acad_af05_426f_aa6d_fe7531072564 ; + owl:qualifiedCardinality "1"^^xsd:nonNegativeInteger ], + [ a owl:Restriction ; + owl:onClass ns1:EMMO_216f448e_cdbc_4aeb_a529_7a5fe7fc38bb ; + owl:onProperty ns1:EMMO_d4e0a0ab_2f67_4f87_a0db_b544e6dceed4 ; owl:qualifiedCardinality "1"^^xsd:nonNegativeInteger ] ; skos:prefLabel "PrefixedUnit"@en ; ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "A measurement unit that is made of a metric prefix and a unit symbol."@en . @@ -17589,7 +17528,7 @@ ns1:EMMO_d5f3e0e5_fc7d_4e64_86ad_555e74aaff84 a owl:Class ; ns1:EMMO_d8d2144e_5c8d_455d_a643_5caf4d8d9df8 a owl:Class ; rdfs:label "Language"@en ; rdfs:comment "A language object is a discrete data entity respecting a specific language syntactic rules (a well-formed formula)."@en ; - rdfs:isDefinedBy ; + rdfs:isDefinedBy ; rdfs:subClassOf ns1:EMMO_057e7d57_aff0_49de_911a_8861d85cef40 ; skos:prefLabel "Language"@en ; ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "A language object is a discrete data entity respecting a specific language syntactic rules (a well-formed formula)."@en . @@ -17744,8 +17683,7 @@ standards. :CharacterisationWorkflow a owl:Class ; rdfs:label "CharacterisationWorkflow"@en ; - rdfs:comment ""^^xsd:string, - "A characterisation procedure that has at least two characterisation tasks as proper parts."@en ; + rdfs:comment "A characterisation procedure that has at least two characterisation tasks as proper parts."@en ; rdfs:isDefinedBy : ; rdfs:subClassOf [ a owl:Restriction ; owl:onProperty ns1:EMMO_70da982d_1810_4b01_9630_a28e216ecd9a ; @@ -17758,16 +17696,13 @@ standards. :Coulometry a owl:Class ; rdfs:label "Coulometry"@en ; - rdfs:comment ""^^xsd:string, - "Coulometry used to measure the amount of substance is a primary reference measurement procedure [VIM 2.8] not requiring calibration with a standard for a quantity of the same kind (i.e. amount of substance)."@en, - "The coulometric experiment can be carried out at controlled (constant) potential (see direct coulometry at controlled potential) or controlled (constant) current (see direct coulometry at controlled current)."@en, - "electrochemical measurement principle in which the electric charge required to carry out a known electrochemical reaction is measured. By Faraday’s laws of electrolysis, the amount of substance is proportional to the charge"@en ; + rdfs:comment "Electrochemical measurement principle in which the electric charge required to carry out a known electrochemical reaction is measured. By Faraday’s laws of electrolysis, the amount of substance is proportional to the charge. Coulometry used to measure the amount of substance is a primary reference measurement procedure [VIM 2.8] not requiring calibration with a standard for a quantity of the same kind (i.e. amount of substance). The coulometric experiment can be carried out at controlled (constant) potential (see direct coulometry at controlled potential) or controlled (constant) current (see direct coulometry at controlled current)."@en ; rdfs:isDefinedBy : ; rdfs:subClassOf :ElectrochemicalTesting ; skos:prefLabel "Coulometry"@en ; ns1:EMMO_26bf1bef_d192_4da6_b0eb_d2209698fb54 "https://www.wikidata.org/wiki/Q1136979"^^xsd:string ; ns1:EMMO_50c298c2_55a2_4068_b3ac_4e948c33181f "https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-04-13"^^xsd:string ; - ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "electrochemical measurement principle in which the electric charge required to carry out a known electrochemical reaction is measured. By Faraday’s laws of electrolysis, the amount of substance is proportional to the charge"@en ; + ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "Electrochemical measurement principle in which the electric charge required to carry out a known electrochemical reaction is measured. By Faraday’s laws of electrolysis, the amount of substance is proportional to the charge. Coulometry used to measure the amount of substance is a primary reference measurement procedure [VIM 2.8] not requiring calibration with a standard for a quantity of the same kind (i.e. amount of substance). The coulometric experiment can be carried out at controlled (constant) potential (see direct coulometry at controlled potential) or controlled (constant) current (see direct coulometry at controlled current)."@en ; ns1:EMMO_c84c6752_6d64_48cc_9500_e54a3c34898d "https://en.wikipedia.org/wiki/Coulometry"@en ; ns1:EMMO_fe015383_afb3_44a6_ae86_043628697aa2 "https://doi.org/10.1515/pac-2018-0109"@en . @@ -17838,7 +17773,7 @@ ns1:EMMO_057e7d57_aff0_49de_911a_8861d85cef40 a owl:Class ; rdfs:comment "A discrete data whose elements can be decoded as tokens from one or more alphabets, without necessarily respecting syntactic rules."@en, """A symbolic entity is not necessarily graphical (e.g. it doesn't necessarily have the physical shape of a letter), but its elements can be decoded and put in relation with an alphabet. In other words, a sequence of bit "1000010" in a RAM (a non-graphical entity) is a valid symbol since it can be decoded through ASCII rules as the letter "B". The same holds for an entity standing for the sound of a voice saying: "Hello", since it can be decomposed in discrete parts, each of them being associated to a letter of an alphabet."""@en ; - rdfs:isDefinedBy ; + rdfs:isDefinedBy ; rdfs:subClassOf ns1:EMMO_be8592a7_68d1_4a06_ad23_82f2b56ef926 ; owl:equivalentClass [ a owl:Class ; owl:unionOf ( ns1:EMMO_89a0c87c_0804_4013_937a_6fe234d9499c ns1:EMMO_a1083d0a_c1fb_471f_8e20_a98f881ad527 ) ] ; @@ -18078,7 +18013,7 @@ ns1:EMMO_60577dea_9019_4537_ac41_80b0fb563d41 a owl:ObjectProperty ; rdfs:label "hasSign"@en ; rdfs:comment "A relation that connects the semiotic object to the sign in a semiotic process."@en ; rdfs:domain ns1:EMMO_6f5af708_f825_4feb_a0d1_a8d813d3022b ; - rdfs:isDefinedBy ; + rdfs:isDefinedBy ; rdfs:range ns1:EMMO_b21a56ed_f969_4612_a6ec_cb7766f7f31d ; rdfs:subPropertyOf ns1:EMMO_2337e25c_3c60_43fc_a8f9_b11a3f974291 ; skos:prefLabel "hasSign"@en ; @@ -18118,7 +18053,7 @@ ns1:EMMO_89a0c87c_0804_4013_937a_6fe234d9499c a owl:Class ; rdfs:label "SymbolicConstruct"@en ; rdfs:comment "A symbolic entity made of other symbolic entities according to a specific spatial configuration."@en, "This class collects individuals that represents arrangements of strings, or other symbolic compositions, without any particular predifined arrangement schema."@en ; - rdfs:isDefinedBy ; + rdfs:isDefinedBy ; rdfs:subClassOf [ a owl:Restriction ; owl:onProperty ns1:EMMO_9380ab64_0363_4804_b13f_3a8a94119a76 ; owl:someValuesFrom ns1:EMMO_057e7d57_aff0_49de_911a_8861d85cef40 ], @@ -18217,7 +18152,7 @@ ns1:EMMO_be8592a7_68d1_4a06_ad23_82f2b56ef926 a owl:Class ; rdfs:comment """A discrete schema may be based on a continuum material basis that is filtered according to its variations. For example, a continuous voltage based signal can be considered 1 or 0 according to some threshold. Discrete does not mean tha the material basis is discrete, but that the data are encoded according to such step-based rules."""@en, "Data whose variations are decoded according to a discrete schema."@en ; - rdfs:isDefinedBy ; + rdfs:isDefinedBy ; skos:prefLabel "DiscreteData"@en ; ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "Data whose variations are decoded according to a discrete schema."@en ; ns1:EMMO_b432d2d5_25f4_4165_99c5_5935a7763c1a "A text is a collection of discrete symbols. A compact disc is designed to host discrete states in the form of pits and lands."@en ; @@ -18294,7 +18229,7 @@ In this material branch, H atom is a particular case, with respect to higher ato We cannot say that H₂ molecule has direct part two H atoms, but has direct part two H nucleus."""@en, "An 'atom' is a 'nucleus' surrounded by an 'electron_cloud', i.e. a quantum system made of one or more bounded electrons."@en ; - rdfs:isDefinedBy ; + rdfs:isDefinedBy ; rdfs:subClassOf [ a owl:Restriction ; owl:onProperty ns1:EMMO_dc57d998_23db_4d8e_b2cd_f346b195b846 ; owl:someValuesFrom ns1:EMMO_8043d3c6_a4c1_4089_ba34_9744e28e5b3d ], @@ -18328,8 +18263,7 @@ ns1:EMMO_f675294e_6f30_4b1d_a68e_a74e59f3b2fc a owl:Class ; :CharacterisationMeasurementInstrument a owl:Class ; rdfs:label "CharacterisationMeasurementInstrument"^^xsd:string ; - rdfs:comment ""^^xsd:string, - """Device used for making measurements, alone or in conjunction with one or more supplementary + rdfs:comment """Device used for making measurements, alone or in conjunction with one or more supplementary devices NOTE 1 A measuring instrument that can be used alone for making measurements is a measuring system. NOTE 2 A measuring instrument is either an indicating measuring instrument or a material measure."""@en, @@ -18379,14 +18313,14 @@ NOTE 2 A measuring instrument is either an indicating measuring instrument or a "Sample preparation processes (e.g., machining, polishing, cutting to size, etc.) before actual observation and measurement."@en ; rdfs:isDefinedBy : ; rdfs:subClassOf [ a owl:Restriction ; - owl:onProperty ns1:EMMO_c4bace1d_4db0_4cd3_87e9_18122bae2840 ; - owl:someValuesFrom :Sample ], - [ a owl:Restriction ; owl:onProperty ns1:EMMO_36e69413_8c59_4799_946c_10b05d266e22 ; owl:someValuesFrom :Sample ], [ a owl:Restriction ; owl:onProperty ns1:EMMO_36e69413_8c59_4799_946c_10b05d266e22 ; owl:someValuesFrom :SamplePreparationParameter ], + [ a owl:Restriction ; + owl:onProperty ns1:EMMO_c4bace1d_4db0_4cd3_87e9_18122bae2840 ; + owl:someValuesFrom :Sample ], :CharacterisationProcedure ; skos:prefLabel "SamplePreparation"@en ; ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "Sample preparation processes (e.g., machining, polishing, cutting to size, etc.) before actual observation and measurement."@en . @@ -18458,7 +18392,7 @@ ns1:EMMO_4207e895_8b83_4318_996a_72cfb32acd94 a owl:Class ; rdfs:label "Material"@en ; rdfs:comment "A instance of a material (e.g. nitrogen) can represent different states of matter. The fact that the individual also belongs to other classes (e.g. Gas) would reveal the actual form in which the material is found."@en, "The class of individuals standing for an amount of ordinary matter substance (or mixture of substances) in different states of matter or phases."@en ; - rdfs:isDefinedBy ; + rdfs:isDefinedBy ; rdfs:subClassOf ns1:EMMO_6e9cb807_fc68_4bcf_b3ba_5fccc887c644, ns1:EMMO_bc37743c_37c4_4ec7_9d58_d1aae5567352 ; skos:prefLabel "Material"@en ; @@ -18469,7 +18403,7 @@ ns1:EMMO_4207e895_8b83_4318_996a_72cfb32acd94 a owl:Class ; ns1:EMMO_4ce76d7f_03f8_45b6_9003_90052a79bfaa a owl:Class ; rdfs:label "Numerical"@en ; rdfs:comment "A 'Mathematical' that has no unknown value, i.e. all its 'Variable\"-s parts refers to a 'Number' (for scalars that have a built-in datatype) or to another 'Numerical' (for complex numerical data structures that should rely on external implementations)."@en ; - rdfs:isDefinedBy ; + rdfs:isDefinedBy ; rdfs:subClassOf ns1:EMMO_54ee6b5e_5261_44a8_86eb_5717e7fdb9d0 ; skos:prefLabel "Numerical"@en ; ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "A 'Mathematical' that has no unknown value, i.e. all its 'Variable\"-s parts refers to a 'Number' (for scalars that have a built-in datatype) or to another 'Numerical' (for complex numerical data structures that should rely on external implementations)."@en . @@ -18649,8 +18583,8 @@ ns1:EMMO_e7aac247_31d6_4b2e_9fd2_e842b1b7ccac a owl:Class ; rdfs:comment "A causal system provides the most general concept of system, being a union of causal structures interacting together. In its most simple form, a causal system is an interlacement of causal paths (the most simple structure type)."@en, "A non-path causal structure"@en ; rdfs:isDefinedBy ; - owl:disjointUnionOf ( ns1:EMMO_09f0ac34_c349_46b5_acf0_0edeae52cca1 ns1:EMMO_0f19d84e_05b4_47c9_a5de_bb2a913d211b ), - ( ns1:EMMO_a6d8e2e2_5e61_4838_977b_9a5dea421fc1 ns1:EMMO_4bb03d40_78d2_45a4_9cb0_4336c9fc3b70 ) ; + owl:disjointUnionOf ( ns1:EMMO_a6d8e2e2_5e61_4838_977b_9a5dea421fc1 ns1:EMMO_4bb03d40_78d2_45a4_9cb0_4336c9fc3b70 ), + ( ns1:EMMO_09f0ac34_c349_46b5_acf0_0edeae52cca1 ns1:EMMO_0f19d84e_05b4_47c9_a5de_bb2a913d211b ) ; skos:prefLabel "CausalSystem"@en ; ns1:EMMO_31252f35_c767_4b97_a877_1235076c3e13 "A causal system provides the most general concept of system, being a union of causal structures interacting together. In its most simple form, a causal system is an interlacement of causal paths (the most simple structure type)."@en ; ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "A non-path causal structure"@en ; @@ -18760,7 +18694,7 @@ A collection can be partitioned in maximally connected items called members. The The combination of collection and item concepts is the EMMO mereocausality alternative to set theory. However, two items can be members only if they are non direct causally connected, giving some constraints to a collection definition. For example, two entities which are directly connected cannot be two distinct members, while their interiors (i.e. the entities obtained by removing the layer of parts that provides the causal contact between them) can be."""@en, "The class of not direct causally self-connected world entities."@en ; rdfs:isDefinedBy ; - rdfs:subClassOf _:74 ; + rdfs:subClassOf _:84 ; skos:prefLabel "Collection"@en ; ns1:EMMO_31252f35_c767_4b97_a877_1235076c3e13 """A collection is the concept that complements the item concept, being an entity that possesses at least one part non directly causally connected with the rest. A collection can be partitioned in maximally connected items called members. The members are self-connected entities and there is no direct causality relation between them. @@ -18794,7 +18728,7 @@ ns1:EMMO_472a0ca2_58bf_4618_b561_6fe68bd9fd49 a owl:Class ; rdfs:comment "A procedure can be considered as an intentional process with a plan."@en, "The process in which an agent works with some entities according to some existing formalised operative rules."@en, "The set of established forms or methods of an organized body for accomplishing a certain task or tasks (Wiktionary)."@en ; - rdfs:isDefinedBy ; + rdfs:isDefinedBy ; rdfs:subClassOf ns1:EMMO_bafc17b5_9be4_4823_8bbe_ab4e90b6738c ; skos:altLabel "Elaboration"@en, "Work"@en ; @@ -18811,7 +18745,7 @@ ns1:EMMO_49267eba_5548_4163_8f36_518d65b583f9 a owl:Class ; rdfs:comment "The class of causal objects that stand for world objects according to a specific representational perspective."@en, """This class is the practical implementation of the EMMO pluralistic approach for which the only objective categorization is provided by the Universe individual and all the Quantum individuals. Between these two extremes, there are several subjective ways to categorize real world objects, each one provide under a 'Perspective' subclass."""@en ; - rdfs:isDefinedBy ; + rdfs:isDefinedBy ; rdfs:subClassOf ns1:EMMO_c5ddfdba_c074_4aa4_ad6b_1ac4942d300d ; skos:prefLabel "Perspective"@en ; ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "The class of causal objects that stand for world objects according to a specific representational perspective."@en ; @@ -18874,7 +18808,7 @@ ns1:EMMO_eb3518bf_f799_4f9e_8c3e_ce59af11453b a owl:ObjectProperty ; rdfs:label "hasConvention"@en ; rdfs:comment "A semiotic relation that connects a declared semiotic object to a conventional sign in a declaration process."@en ; rdfs:domain ns1:EMMO_c9805ac9_a943_4be4_ac4b_6da64ba36c73 ; - rdfs:isDefinedBy ; + rdfs:isDefinedBy ; rdfs:range ns1:EMMO_35d2e130_6e01_41ed_94f7_00b333d46cf9 ; rdfs:subPropertyOf ns1:EMMO_60577dea_9019_4537_ac41_80b0fb563d41 ; skos:prefLabel "hasConvention"@en ; @@ -18920,8 +18854,7 @@ ns1:EMMO_f3dd74c0_f480_49e8_9764_33b78638c235 a owl:Class ; :CharacterisationMeasurementProcess a owl:Class ; rdfs:label "CharacterisationMeasurementProcess"@en ; - rdfs:comment ""^^xsd:string, - """Process of experimentally obtaining one or more values that can reasonably be attributed to a quantity together with any other available relevant information + rdfs:comment """Process of experimentally obtaining one or more values that can reasonably be attributed to a quantity together with any other available relevant information NOTE 1 The quantity mentioned in the definition is an individual quantity. NOTE 2 The relevant information mentioned in the definition may be about the values obtained by the measurement, such that some may be more representative of the measurand than others. @@ -18942,6 +18875,9 @@ system specifications. rdfs:subClassOf [ a owl:Restriction ; owl:onProperty ns1:EMMO_35c29eb6_f57e_48d8_85af_854f9e926e77 ; owl:someValuesFrom :CharacterisationEnvironment ], + [ a owl:Restriction ; + owl:onProperty ns1:EMMO_35c29eb6_f57e_48d8_85af_854f9e926e77 ; + owl:someValuesFrom :CharacterisationMeasurementInstrument ], [ a owl:Restriction ; owl:onProperty ns1:EMMO_35c29eb6_f57e_48d8_85af_854f9e926e77 ; owl:someValuesFrom :Sample ], @@ -18951,9 +18887,6 @@ system specifications. [ a owl:Restriction ; owl:onProperty ns1:EMMO_c4bace1d_4db0_4cd3_87e9_18122bae2840 ; owl:someValuesFrom :CharacterisationData ], - [ a owl:Restriction ; - owl:onProperty ns1:EMMO_35c29eb6_f57e_48d8_85af_854f9e926e77 ; - owl:someValuesFrom :CharacterisationMeasurementInstrument ], ns1:EMMO_463bcfda_867b_41d9_a967_211d4d437cfb, :CharacterisationProcedure ; skos:prefLabel "CharacterisationMeasurementProcess"@en ; @@ -19087,7 +19020,7 @@ ns1:EMMO_6523cad7_ea54_471c_adb7_e783f824ec09 a owl:Class ; ns1:EMMO_8b1367d6_0133_4b56_acc1_fa8b058169e3 a owl:Class ; rdfs:label "CompositePhysicalParticle"@en ; rdfs:comment "A composite particle is a bound state of elementary particles for which it is still possible to define its bosonic or fermionic behaviour."@en ; - rdfs:isDefinedBy ; + rdfs:isDefinedBy ; rdfs:subClassOf ns1:EMMO_38b579de_4331_40e0_803d_09efa298e726 ; owl:disjointUnionOf ( ns1:EMMO_1f19b65b_35bf_4662_a318_7f1c147cb3b6 ns1:EMMO_29108c7c_9087_4992_ab1c_02561665df21 ) ; skos:prefLabel "CompositePhysicalParticle"@en ; @@ -19209,13 +19142,11 @@ ns1:EMMO_fc859d37_408d_44b6_b345_a0ea0b65121e a owl:Class ; :Chronopotentiometry a owl:Class ; rdfs:label "Chronopotentiometry"@en ; - rdfs:comment ""^^xsd:string, - "The change in applied current is usually a step, but cyclic current reversals or linearly increasing currents are also used."@en, - "potentiometry in which the potential is measured with time following a change in applied current"@en ; + rdfs:comment "Potentiometry in which the potential is measured with time following a change in applied current. The change in applied current is usually a step, but cyclic current reversals or linearly increasing currents are also used."@en ; rdfs:isDefinedBy : ; rdfs:subClassOf :Potentiometry ; skos:prefLabel "Chronopotentiometry"@en ; - ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "potentiometry in which the potential is measured with time following a change in applied current"@en ; + ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 "Potentiometry in which the potential is measured with time following a change in applied current. The change in applied current is usually a step, but cyclic current reversals or linearly increasing currents are also used."@en ; ns1:EMMO_fe015383_afb3_44a6_ae86_043628697aa2 "https://doi.org/10.1515/pac-2018-0109"@en . :ElectrochemicalTesting a owl:Class ; @@ -19242,7 +19173,7 @@ ns1:EMMO_5b2222df_4da6_442f_8244_96e9e45887d1 a owl:Class ; It is possible to identify more than one concept that can be reasonably labelled with the term "matter". For example, it is possible to label as matter only the entities that are made up of atoms. Or more generally, we can be more fine-grained and call "matter" the entities that are made up of protons, neutrons or electrons, so that we can call matter also a neutron radiation or a cathode ray. A more fundamental approach, that we embrace for the EMMO, considers matter as entities that are made of fermions (i.e. quarks and leptons). This would exclude particles like the W and Z bosons that possess some mass, but are not fermions. Antimatter is a subclass of matter."""@en ; - rdfs:isDefinedBy ; + rdfs:isDefinedBy ; rdfs:subClassOf ns1:EMMO_38b579de_4331_40e0_803d_09efa298e726 ; owl:disjointUnionOf ( ns1:EMMO_1c16bb7f_5400_4498_8ef2_54392908da4e ns1:EMMO_6e9cb807_fc68_4bcf_b3ba_5fccc887c644 ns1:EMMO_f13672a3_59cc_40ed_8def_65009a8f74e6 ) ; skos:altLabel "PhysicalSubstance"@en ; @@ -19402,8 +19333,8 @@ Entities are not placed in space or time: space and time are always relative bet "The class of all the OWL individuals declared by EMMO as standing for world entities."@en, "The disjoint union of the Item and Collection classes."@en ; rdfs:isDefinedBy ; - rdfs:subClassOf _:89, - _:92 ; + rdfs:subClassOf _:70, + _:82 ; owl:disjointUnionOf [ a rdf:List ; rdf:first ns1:EMMO_2d2ecd97_067f_4d0e_950c_d746b7700a31 ; rdf:rest [ a rdf:List ; @@ -19519,8 +19450,7 @@ ns1:EMMO_f2ca6dd0_0e5f_4392_a92d_cafdae6cfc95 a owl:Class ; :CharacterisationProcedure a owl:Class ; rdfs:label "CharacterisationProcedure"@en ; - rdfs:comment ""^^xsd:string, - "Characterisation procedure may refer to the full characterisation process or just a part of the full process."@en, + rdfs:comment "Characterisation procedure may refer to the full characterisation process or just a part of the full process."@en, "The process of performing characterisation by following some existing formalised operative rules."@en ; rdfs:isDefinedBy : ; rdfs:subClassOf ns1:EMMO_472a0ca2_58bf_4618_b561_6fe68bd9fd49 ; @@ -19730,7 +19660,7 @@ ns1:EMMO_43e9a05d_98af_41b4_92f6_00f79a09bfce a owl:Class ; """Following the common definition of process, the reader may think that every whole should be a process, since every 4D object always has a time dimension. However, in the EMMO we restrict the meaning of the word process to items whose evolution in time have a particular meaning for the ontologist (i.e. every 4D object unfolds in time, but not every 4D time unfolding may be of interest for the ontologist and categorized as a process). For this reason, the definition of every specific process subclass requires the introduction of a primitive concept."""@en ; - rdfs:isDefinedBy ; + rdfs:isDefinedBy ; skos:altLabel "Occurrent"@en, "Perdurant"@en ; skos:prefLabel "Process"@en ; @@ -19749,8 +19679,7 @@ ns1:EMMO_c7b62dd7_063a_4c2a_8504_42f7264ba83f a owl:AnnotationProperty ; :CharacterisationTechnique a owl:Class ; rdfs:label "CharacterisationTechnique"@en ; - rdfs:comment ""^^xsd:string, - "A characterisation method is not only related to the measurement process which can be one of its steps."^^xsd:string, + rdfs:comment "A characterisation method is not only related to the measurement process which can be one of its steps."^^xsd:string, "The description of the overall characterisation method. It can be composed of different steps (e.g. sample preparation, calibration, measurement, post-processing)."@en ; rdfs:isDefinedBy : ; rdfs:subClassOf ns1:EMMO_c7013b53_3071_410b_a5e4_a8d266dcdfb5 ; @@ -19997,35 +19926,61 @@ Examples of correspondance between dimensional units and their dimensional units - ElectricCurrentDensityUnit <=> "T0 L-2 M0 I+1 Θ0 N0 J0\""""@en . [] a owl:Axiom ; - owl:annotatedProperty skos:prefLabel ; - owl:annotatedSource ns1:EMMO_fa3c9d4d_9fc9_4e8a_82c1_28c84e34133a ; - owl:annotatedTarget "FundamentalBoson"@en ; - ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "1940s: named after S.N. Bose."@en . + dcterms:source "Scholz F, Nitschke L, Henrion G (1989) Naturwiss 76:71;"^^xsd:string ; + owl:annotatedProperty ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 ; + owl:annotatedSource :AbrasiveStrippingVoltammetry ; + owl:annotatedTarget "electrochemical method where traces of solid particles are abrasively transferred onto the surface of an electrode, followed by an electrochemical dissolution (anodic or cathodic dissolution) that is recorded as a current–voltage curve"@en . [] a owl:Axiom ; - owl:annotatedProperty skos:prefLabel ; - owl:annotatedSource ns1:EMMO_3f2e4ac2_8ef3_4a14_b826_60d37f15f8ee ; - owl:annotatedTarget "mereological"@en ; - ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 """Coined by Stanisław Leśniewski in 1927, from Ancient Greek μέρος (méros, “part”) +‎ -logy (“study, discussion, science”). -https://en.wiktionary.org/wiki/mereology"""@en . + owl:annotatedProperty ns1:EMMO_70fe84ff_99b6_4206_a9fc_9a8931836d84 ; + owl:annotatedSource ns1:EMMO_802d3e92_8770_4f98_a289_ccaaab7fdddf ; + owl:annotatedTarget "The disjoint union of the Item and Collection classes."@en ; + ns1:EMMO_c7b62dd7_063a_4c2a_8504_42f7264ba83f """The union implies that world entities can only be items or collections (standing for a collection of causally disconnected items). +Disjointness means that a collection cannot be an item and viceversa, representing the fact that a world entity cannot be causally self-connected and non-self connected at the same time."""@en . [] a owl:Axiom ; - owl:annotatedProperty skos:prefLabel ; - owl:annotatedSource ns1:EMMO_e7aac247_31d6_4b2e_9fd2_e842b1b7ccac ; - owl:annotatedTarget "CausalSystem"@en ; - ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin causa (“reason, sake, cause”), and Ancient Greek σύστημα (sústēma, “musical scale; organized body; whole made of several parts or members”), from σῠν- (sun-, prefix meaning ‘with, together’) + ἵστημι (hístēmi, “to stand”)."@en . + dcterms:source "J. M. Pingarrón et al., Terminology of electrochemical methods of analysis (IUPAC Recommendations 2019), Pure and Applied Chemistry, 4, 92, 2020, 641-694. https://doi.org/10.1515/pac-2018-0109"^^xsd:string ; + owl:annotatedProperty rdfs:comment ; + owl:annotatedSource :PotentiometricStrippingAnalysis ; + owl:annotatedTarget "the time between changes in potential in step 2 is related to the concentration of analyte in the solution"@en . + +[] a swrl:Imp ; + swrl:body [ a swrl:AtomList ; + rdf:first [ a swrl:ClassAtom ; + swrl:argument1 ; + swrl:classPredicate ns1:EMMO_802d3e92_8770_4f98_a289_ccaaab7fdddf ] ; + rdf:rest () ] ; + swrl:head [ a swrl:AtomList ; + rdf:first [ a swrl:IndividualPropertyAtom ; + swrl:argument1 ; + swrl:argument2 ; + swrl:propertyPredicate ns1:EMMO_17e27c22_37e1_468c_9dd7_95e137f73e7f ] ; + rdf:rest () ] ; + ns1:EMMO_c7b62dd7_063a_4c2a_8504_42f7264ba83f "Enforcing parthood reflexivity."@en . [] a owl:Axiom ; - owl:annotatedProperty skos:altLabel ; - owl:annotatedSource ns1:EMMO_0f795e3e_c602_4577_9a43_d5a231aa1360 ; - owl:annotatedTarget "CausalChain"@en ; - ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Old French chaine, chaene (“chain”), from Latin catēna (“chain”)."@en . + owl:annotatedProperty rdfs:subClassOf ; + owl:annotatedSource ns1:EMMO_2d2ecd97_067f_4d0e_950c_d746b7700a31 ; + owl:annotatedTarget _:84 ; + ns1:EMMO_c7b62dd7_063a_4c2a_8504_42f7264ba83f "Every collection has at least two item members, since a collection of one item is a self-connected entity (and then an item)."@en . [] a owl:Axiom ; - rdfs:seeAlso "https://www.w3.org/TR/2012/REC-owl2-syntax-20121211/#Global_Restrictions_on_Axioms_in_OWL_2_DL"^^xsd:anyURI ; + rdfs:seeAlso "https://en.wiktionary.org/wiki/Wiktionary"@en ; + owl:annotatedProperty ns1:EMMO_c7b62dd7_063a_4c2a_8504_42f7264ba83f ; + owl:annotatedSource ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 ; + owl:annotatedTarget "Definitions are usually taken from Wiktionary."@en . + +[] a owl:Axiom ; + owl:annotatedProperty skos:prefLabel ; + owl:annotatedSource ns1:EMMO_eb3a768e_d53e_4be9_a23b_0714833c36de ; + owl:annotatedTarget "Item"@en ; + ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin item, \"likewise, just so, moreover\"."@en . + +[] a owl:Axiom ; + dcterms:source "J. M. Pingarrón et al., Terminology of electrochemical methods of analysis (IUPAC Recommendations 2019), Pure and Applied Chemistry, 4, 92, 2020, 641-694. https://doi.org/10.1515/pac-2018-0109"^^xsd:string ; owl:annotatedProperty ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 ; - owl:annotatedSource ns1:EMMO_c6e77b51_681b_4d04_b20d_a08f2b977470 ; - owl:annotatedTarget "Axiom not included in the theory because of OWL 2 DL global restrictions for decidability."@en . + owl:annotatedSource :DifferentialLinearPulseVoltammetry ; + owl:annotatedTarget "Differential Pulse Voltammetry in which small potential pulses are superimposed onto a linearly varying potential."@en . [] a owl:Axiom ; owl:annotatedProperty skos:prefLabel ; @@ -20034,35 +19989,28 @@ https://en.wiktionary.org/wiki/mereology"""@en . ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin quantum (plural quanta) \"as much as, so much as\"."@en . [] a owl:Axiom ; - rdfs:seeAlso "DIN 65099-5:1989-11"^^xsd:string ; - owl:annotatedProperty rdfs:comment ; - owl:annotatedSource ns1:EMMO_4f46c5ab_1c21_4639_90d5_3c4ebf3b156b ; - owl:annotatedTarget "Nailing is joining by hammering or pressing nails (wire pins) as auxiliary parts into the solid material. Several parts are joined by pressing them together (from: DIN 8593 part 3/09.85)."^^xsd:string . + owl:annotatedProperty skos:prefLabel ; + owl:annotatedSource ns1:EMMO_912ac3a2_a124_4233_92dd_06c9aebea46c ; + owl:annotatedTarget "Assemblying"@en ; + ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Old French asembler, based on Latin ad- ‘to’ + simul ‘together’."@en . [] a owl:Axiom ; - rdfs:seeAlso "https://en.wiktionary.org/wiki/workpiece"^^xsd:string ; + rdfs:seeAlso "DIN 8588:2013-08"^^xsd:string ; owl:annotatedProperty rdfs:comment ; - owl:annotatedSource ns1:EMMO_479db031_b344_4488_9efa_4bc12c6c1765 ; - owl:annotatedTarget "The raw material or partially finished piece that is shaped by performing various operations."^^xsd:string . + owl:annotatedSource ns1:EMMO_1d6b63d5_9938_483c_ad62_a09ac34153c9 ; + owl:annotatedTarget "Cutting workpieces between two cutting edges that move past each other (see Figure 1 [see figure in the standard])."^^xsd:string . [] a owl:Axiom ; - rdfs:seeAlso "DIN 8587:2003-09"^^xsd:string ; + rdfs:seeAlso "DIN 8589-6:2003-09"^^xsd:string ; owl:annotatedProperty rdfs:comment ; - owl:annotatedSource ns1:EMMO_22744495_4f32_4a17_b189_259c644268f9 ; - owl:annotatedTarget "Forming of a solid body, whereby the plastic state is essentially brought about by shear stress."^^xsd:string . - -[] a owl:Axiom ; - rdfs:seeAlso "DIN 8580:2022-12"^^xsd:string ; - owl:annotatedProperty ns1:EMMO_c7b62dd7_063a_4c2a_8504_42f7264ba83f ; - owl:annotatedSource ns1:EMMO_fc859d37_408d_44b6_b345_a0ea0b65121e ; - owl:annotatedTarget "Manufacturing by changing the properties of the material of which a workpiece is made, which is done, among other things, by changes in the submicroscopic or atomic range, e.g. by diffusion of atoms, generation and movement of dislocations in the atomic lattice or chemical reactions, and where unavoidable changes in shape are not part of the essence of these processes."^^xsd:string . + owl:annotatedSource ns1:EMMO_c7d004db_59fa_5ae3_adb1_e75736aa721a ; + owl:annotatedTarget "Cutting with circular or straight cutting motion, using a multi-toothed tool of small cutting width, the cutting motion being performed by the tool"^^xsd:string . [] a owl:Axiom ; - rdfs:isDefinedBy "https://www.iso.org/obp/ui/#iso:std:iso-astm:tr:52906:ed-1:v1:en:term:3.9"^^xsd:anyURI ; - owl:annotatedProperty rdfs:seeAlso ; - owl:annotatedSource ns1:EMMO_03441eb3_d1fd_4906_b953_b83312d7589e ; - owl:annotatedTarget """ISO/ASTM TR 52906:2022 Additive manufacturing -sintering: process of heating a powder metal compact to increase density and/or improve mechanical properties via solid state diffusion"""@en . + owl:annotatedProperty skos:altLabel ; + owl:annotatedSource ns1:EMMO_86ca9b93_1183_4b65_81b8_c0fcd3bba5ad ; + owl:annotatedTarget "Engineered"@en ; + ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin ingenium \"innate qualities, ability; inborn character,\" in Late Latin \"a war engine, battering ram\"; literally \"that which is inborn,\" from in- (\"in\") + gignere (\"give birth, beget\")."@en . [] a owl:Axiom ; owl:annotatedProperty skos:prefLabel ; @@ -20071,88 +20019,41 @@ sintering: process of heating a powder metal compact to increase density and/or ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "EMMO is the acronym of Elementary Multiperspective Material Ontology."@en . [] a owl:Axiom ; - rdfs:seeAlso "ISO 13574:2015-02"^^xsd:string ; - owl:annotatedProperty rdfs:comment ; - owl:annotatedSource ns1:EMMO_92eaefcb_50be_4237_9ec0_4a019ce24921 ; - owl:annotatedTarget "Process for removing unwanted residual or waste material from a given product or material"^^xsd:string . + owl:annotatedProperty skos:prefLabel ; + owl:annotatedSource ns1:EMMO_86ca9b93_1183_4b65_81b8_c0fcd3bba5ad ; + owl:annotatedTarget "ManufacturedProduct"@en ; + ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin manufacture: \"made by hand\"."@en . [] a owl:Axiom ; - rdfs:seeAlso "https://en.wikipedia.org/wiki/Technology"^^xsd:string ; - owl:annotatedProperty rdfs:comment ; - owl:annotatedSource ns1:EMMO_2b9cbfb5_dbd0_4a68_9c6f_acc41b40dd72 ; - owl:annotatedTarget "Technology is the application of knowledge for achieving practical goals in a reproducible way."^^xsd:string . - -[] a owl:Axiom ; - owl:annotatedProperty skos:prefLabel ; - owl:annotatedSource ns1:EMMO_86ca9b93_1183_4b65_81b8_c0fcd3bba5ad ; - owl:annotatedTarget "ManufacturedProduct"@en ; - ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin manufacture: \"made by hand\"."@en . + rdfs:seeAlso "DIN 8580:2022-12"^^xsd:string ; + owl:annotatedProperty ns1:EMMO_c7b62dd7_063a_4c2a_8504_42f7264ba83f ; + owl:annotatedSource ns1:EMMO_fc859d37_408d_44b6_b345_a0ea0b65121e ; + owl:annotatedTarget "Manufacturing by changing the properties of the material of which a workpiece is made, which is done, among other things, by changes in the submicroscopic or atomic range, e.g. by diffusion of atoms, generation and movement of dislocations in the atomic lattice or chemical reactions, and where unavoidable changes in shape are not part of the essence of these processes."^^xsd:string . [] a owl:Axiom ; - rdfs:seeAlso "DIN EN ISO 15156-3:2015-12"^^xsd:string ; - owl:annotatedProperty ns1:EMMO_c7b62dd7_063a_4c2a_8504_42f7264ba83f ; - owl:annotatedSource ns1:EMMO_dacfc7dc_5ddb_4f67_986b_dcd01d649d60 ; - owl:annotatedTarget "Heat to a temperature appropriate for the particular material, maintain at that temperature and then cool at an appropriate rate to reduce hardness, improve machinability or achieve desired properties."^^xsd:string . + rdfs:seeAlso "DIN 8589-0:2003-09"^^xsd:string ; + owl:annotatedProperty skos:altLabel ; + owl:annotatedSource ns1:EMMO_8679c7d3_fd5d_49ba_bc1f_1bb820a1f73f ; + owl:annotatedTarget "Machining in which a tool is used whose number of cutting edges, geometry of the cutting wedges and position of the cutting edges in relation to the workpiece are determined"^^xsd:string . [] a owl:Axiom ; - rdfs:isDefinedBy "https://www.iso.org/obp/ui/#iso:std:iso:3252:ed-5:v1:en:term:3.3.55"^^xsd:anyURI ; + rdfs:isDefinedBy "https://www.iso.org/obp/ui/#iso:std:iso:3252:ed-5:v1:en:term:3.3.32"^^xsd:anyURI ; owl:annotatedProperty rdfs:seeAlso ; - owl:annotatedSource ns1:EMMO_2b524942_4e3e_403a_b4ab_2b53750f3d3b ; + owl:annotatedSource ns1:EMMO_3cb27225_df45_4616_aa3b_32dba383524c ; owl:annotatedTarget """ISO 3252:2019 Powder metallurgy -reaction sintering: process wherein at least two constituents of a powder mixture react during sintering"""@en . +liquid-phase sintering: sintering of a powder or compact containing at least two constituents, under conditions such that a liquid phase is formed"""@en . [] a owl:Axiom ; - owl:annotatedProperty skos:prefLabel ; + owl:annotatedProperty skos:altLabel ; owl:annotatedSource ns1:EMMO_494b372c_cfdf_47d3_a4de_5e037c540de8 ; - owl:annotatedTarget "Device"@en ; - ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Old French \"deviser\", meaning: arrange, plan, contrive. Literally \"dispose in portions,\" from Vulgar Latin \"divisare\", frequentative of Latin dividere, meaning \"to divide\"."@en . - -[] a owl:Axiom ; - rdfs:seeAlso "https://www.collinsdictionary.com/it/dizionario/inglese/technology"^^xsd:string ; - owl:annotatedProperty rdfs:comment ; - owl:annotatedSource ns1:EMMO_2b9cbfb5_dbd0_4a68_9c6f_acc41b40dd72 ; - owl:annotatedTarget "Technology refers to methods, systems, and devices which are the result of scientific knowledge being used for practical purposes."^^xsd:string . + owl:annotatedTarget "Machine"@en ; + ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin māchina (“a machine, engine, contrivance, device, stratagem, trick”), from Doric Greek μᾱχᾰνᾱ́ (mākhanā́), cognate with Attic Greek μηχᾰνή (mēkhanḗ, “a machine, engine, contrivance, device”), from which comes mechanical."@en . [] a owl:Axiom ; - rdfs:seeAlso "DIN 8580:2022-12"^^xsd:string ; owl:annotatedProperty skos:altLabel ; - owl:annotatedSource ns1:EMMO_46dc0d51_b60f_49cd_8650_9aba7be3726c ; - owl:annotatedTarget "Verfestigen durch Umformen"^^xsd:string . - -[] a owl:Axiom ; - rdfs:isDefinedBy "https://www.iso.org/obp/ui/#iso:std:iso:8887:-1:ed-1:v1:en:term:3.1.5"^^xsd:anyURI ; - owl:annotatedProperty rdfs:seeAlso ; - owl:annotatedSource ns1:EMMO_8786cb47_8e1f_4968_9b15_f6d41fc51252 ; - owl:annotatedTarget """ISO 8887-1:2017 -manufacturing: production of components"""@en . - -[] a swrl:Imp ; - swrl:body [ a swrl:AtomList ; - rdf:first [ a swrl:IndividualPropertyAtom ; - swrl:argument1 ; - swrl:argument2 ; - swrl:propertyPredicate ns1:EMMO_d67ee67e_4fac_4676_82c9_aec361dba698 ] ; - rdf:rest () ] ; - swrl:head [ a swrl:AtomList ; - rdf:first [ a swrl:IndividualPropertyAtom ; - swrl:argument1 ; - swrl:argument2 ; - swrl:propertyPredicate ns1:EMMO_aa987900_caf1_4ce2_82fa_6b1d6fbd2ead ] ; - rdf:rest () ] ; - ns1:EMMO_c7b62dd7_063a_4c2a_8504_42f7264ba83f "Enforcing exclusivity between overlapping and causality."@en . - -[] a owl:Axiom ; - rdfs:isDefinedBy "https://www.iso.org/obp/ui/#iso:std:iso:3252:ed-5:v1:en:term:3.3.33"^^xsd:anyURI ; - owl:annotatedProperty rdfs:seeAlso ; - owl:annotatedSource ns1:EMMO_3ec45f3b_677d_4e71_be75_6f8966b4f808 ; - owl:annotatedTarget """ISO 3252:2019 Powder metallurgy -loose-powder sintering, gravity sintering: sintering of uncompacted powder"""@en . - -[] a owl:Axiom ; - rdfs:seeAlso "DIN EN 10210-3:2020-11"^^xsd:string ; - owl:annotatedProperty ns1:EMMO_c7b62dd7_063a_4c2a_8504_42f7264ba83f ; - owl:annotatedSource ns1:EMMO_6fa330f7_3289_4228_81df_12ee8a9708ac ; - owl:annotatedTarget "Process consisting of two steps: - first, the steel is heated in a quenching treatment to a temperature above Ac3 and then rapidly cooled in a liquid to produce a process-specific grain structure; - subsequently, the steel is heated to a specific temperature during tempering to set the desired property and cooled in air."^^xsd:string . + owl:annotatedSource ns1:EMMO_86ca9b93_1183_4b65_81b8_c0fcd3bba5ad ; + owl:annotatedTarget "Artifact"@en ; + ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin arte ‘by or using art’ + factum ‘something made’."@en . [] a owl:Axiom ; rdfs:seeAlso "DIN EN 9110:2018-08"^^xsd:string ; @@ -20161,34 +20062,35 @@ loose-powder sintering, gravity sintering: sintering of uncompacted powder"""@en owl:annotatedTarget "action to disassemble a product or a component by removing all or some of its constituent parts with the intent to salvage"^^xsd:string . [] a owl:Axiom ; - rdfs:seeAlso "DIN 8588:2013-08"^^xsd:string ; - owl:annotatedProperty rdfs:comment ; - owl:annotatedSource ns1:EMMO_d5f98475_00ce_4987_99fb_262aed395e46 ; - owl:annotatedTarget "Mechanical separation of workpieces without the formation of shapeless material, i.e. also without chips (chipless)."^^xsd:string . + rdfs:seeAlso "DIN EN ISO 15156-3:2015-12"^^xsd:string ; + owl:annotatedProperty ns1:EMMO_c7b62dd7_063a_4c2a_8504_42f7264ba83f ; + owl:annotatedSource ns1:EMMO_dacfc7dc_5ddb_4f67_986b_dcd01d649d60 ; + owl:annotatedTarget "Heat to a temperature appropriate for the particular material, maintain at that temperature and then cool at an appropriate rate to reduce hardness, improve machinability or achieve desired properties."^^xsd:string . [] a owl:Axiom ; - rdfs:seeAlso "DIN 65099-3:1989-11"^^xsd:string ; + rdfs:seeAlso "DIN 8589-3:2003-09"^^xsd:string ; owl:annotatedProperty rdfs:comment ; - owl:annotatedSource ns1:EMMO_7432b843_cfd2_4345_a3d2_eaa539b27e61 ; - owl:annotatedTarget "Free forming is pressure forming with tools that do not or only partially contain the shape of the workpiece and move against each other."^^xsd:string . + owl:annotatedSource ns1:EMMO_44f91d47_3faf_48e2_844c_d44bbe3e22f6 ; + owl:annotatedTarget "Machining with a circular cutting movement, usually associated with a multi-toothed tool, and with a feed movement perpendicular or oblique to the axis of rotation of the tool, to produce any workpiece surface."^^xsd:string . [] a owl:Axiom ; - rdfs:seeAlso "EN 10028-1:2017-07"^^xsd:string ; - owl:annotatedProperty ns1:EMMO_c7b62dd7_063a_4c2a_8504_42f7264ba83f ; - owl:annotatedSource ns1:EMMO_9900d51c_bdd3_40e8_aa82_ad1aa7092f71 ; - owl:annotatedTarget "heat treatment consisting of heating and soaking at a suitable temperature, followed by cooling under conditions such that, after return to ambient temperature, the metal will be in a structural state closer to that of equilibrium"^^xsd:string . + rdfs:seeAlso "DIN EN 12258-1:2012-08"^^xsd:string ; + owl:annotatedProperty rdfs:comment ; + owl:annotatedSource ns1:EMMO_2138677c_845a_4bc2_8be7_7b0a07b4777d ; + owl:annotatedTarget "Removal of material by means of rigid or flexible discs or belts containing abrasives."^^xsd:string . [] a owl:Axiom ; - rdfs:seeAlso "DIN 8583-1:2003-09"^^xsd:string ; + rdfs:seeAlso "DIN 8590 Berichtigung 1:2004-02"^^xsd:string ; owl:annotatedProperty rdfs:comment ; - owl:annotatedSource ns1:EMMO_39d5c9c4_7d24_4409_ba3b_60ca3afde902 ; - owl:annotatedTarget "Forming of a solid body, whereby the plastic state is essentially brought about by uniaxial or multiaxial compressive stress."^^xsd:string . + owl:annotatedSource ns1:EMMO_1a2cbca8_3d3b_4e2c_9a71_e39273937786 ; + owl:annotatedTarget "Manufacturing by separating particles of material from a solid body by non-mechanical means. Ablation refers both to the removal of layers of material and to the separation of workpiece parts. The production process of ablation is considered in its stationary instantaneous state, independently of the application of auxiliary processes necessary to initiate the process. Ablation is divided into three subgroups according to the order point of view (OGP) \"process in the effective zone on the surface of the workpiece\": - thermal ablation; - chemical ablation; - electrochemical ablation."^^xsd:string . [] a owl:Axiom ; - rdfs:seeAlso "ISO 23952:2020(en), 3.4.143"^^xsd:string ; - owl:annotatedProperty rdfs:comment ; - owl:annotatedSource ns1:EMMO_479db031_b344_4488_9efa_4bc12c6c1765 ; - owl:annotatedTarget "a physical artifact, real or virtual, intended for subsequent transformation within some manufacturing operation"^^xsd:string . + rdfs:isDefinedBy "https://www.iso.org/obp/ui/#iso:std:iso:15531:-1:ed-1:v1:en:term:3.6.9"^^xsd:anyURI ; + owl:annotatedProperty rdfs:seeAlso ; + owl:annotatedSource ns1:EMMO_8786cb47_8e1f_4968_9b15_f6d41fc51252 ; + owl:annotatedTarget """ISO 15531-1:2004 +discrete manufacturing: production of discrete items."""@en . [] a owl:Axiom ; rdfs:seeAlso "EN 16603-11:2019-11"^^xsd:string ; @@ -20197,138 +20099,177 @@ loose-powder sintering, gravity sintering: sintering of uncompacted powder"""@en owl:annotatedTarget "application of scientific knowledge, tools, techniques, crafts, systems or methods of organization in order to solve a problem or achieve an objective"^^xsd:string . [] a owl:Axiom ; - rdfs:seeAlso "DIN EN 13956:2013-03"^^xsd:string ; - owl:annotatedProperty rdfs:comment ; - owl:annotatedSource ns1:EMMO_06c415dc_ba26_407d_b596_283bd4d9a66f ; - owl:annotatedTarget "Joining process by softening the surfaces to be joined, either by heat or with a solvent (swelling welding, solvent welding), and pressing the softened surfaces together."^^xsd:string . + rdfs:isDefinedBy "https://www.iso.org/obp/ui/#iso:std:iso:18435:-1:ed-1:v1:en:term:3.16"^^xsd:anyURI ; + owl:annotatedProperty rdfs:seeAlso ; + owl:annotatedSource ns1:EMMO_a4d66059_5dd3_4b90_b4cb_10960559441b ; + owl:annotatedTarget """ISO 18435-1:2009 +manufacturing process: set of processes in manufacturing involving a flow and/or transformation of material, information, energy, control, or any other element in a manufacturing area"""@en . [] a owl:Axiom ; - rdfs:seeAlso "DIN EN ISO 472/A1:2019-03"^^xsd:string ; + rdfs:seeAlso "DIN 8593-3:2003-09"^^xsd:string ; owl:annotatedProperty rdfs:comment ; - owl:annotatedSource ns1:EMMO_f5655090_2266_41cb_b2e9_3b4569c45731 ; - owl:annotatedTarget "Type of scratching behaviour where the scratching force and the (displacement) deflection of the scratching tip are constant over the scratching distance during the test."^^xsd:string . + owl:annotatedSource ns1:EMMO_bbf12904_e25e_4f49_87f3_8bd210a6b535 ; + owl:annotatedTarget "A collective term for the processes in which, during joining, the parts to be joined and any auxiliary parts are essentially only elastically deformed and unintentional loosening is prevented by frictional connection."^^xsd:string . [] a owl:Axiom ; - rdfs:seeAlso "DIN 8583-2:2003-09"^^xsd:string ; + rdfs:seeAlso "DIN 8589-2:2003-09"^^xsd:string ; owl:annotatedProperty rdfs:comment ; - owl:annotatedSource ns1:EMMO_91c2db4b_83e2_4c36_aadf_453acc72e6d2 ; - owl:annotatedTarget "Continuous or stepwise pressure forming with one or more rotating tools (rollers), without or with additional tools, e.g. plugs or mandrels, rods, guide tools"^^xsd:string . + owl:annotatedSource ns1:EMMO_c1dad83e_974f_432e_ac92_d016f2445279 ; + owl:annotatedTarget "machining with a circular cutting movement in which the axis of rotation of the tool and the axis of the internal surface to be produced are identical and the feed movement is in the direction of this axis. The axis of rotation of the cutting movement maintains its position relative to the workpiece independently of the feed movement (axis of rotation workpiece-bound)."^^xsd:string . [] a owl:Axiom ; - rdfs:seeAlso "DIN 8586:2003-09"^^xsd:string ; + owl:annotatedProperty skos:prefLabel ; + owl:annotatedSource ns1:EMMO_2d2ecd97_067f_4d0e_950c_d746b7700a31 ; + owl:annotatedTarget "Collection"@en ; + ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin collectio, from colligere ‘gather together’."@en . + +[] a owl:Axiom ; + rdfs:seeAlso "DIN 65099-3:1989-11"^^xsd:string ; owl:annotatedProperty rdfs:comment ; - owl:annotatedSource ns1:EMMO_68ee441e_c89e_4391_93c3_e68fef59fe14 ; - owl:annotatedTarget "Forming of a solid body, whereby the plastic state is essentially brought about by a bending stress"^^xsd:string . + owl:annotatedSource ns1:EMMO_7432b843_cfd2_4345_a3d2_eaa539b27e61 ; + owl:annotatedTarget "Free forming is pressure forming with tools that do not or only partially contain the shape of the workpiece and move against each other."^^xsd:string . [] a owl:Axiom ; - rdfs:seeAlso "DIN 65099-5:1989-11"^^xsd:string ; + rdfs:seeAlso "DIN 8585-3:2003-09"^^xsd:string ; owl:annotatedProperty rdfs:comment ; - owl:annotatedSource ns1:EMMO_410b5956_a06d_4370_b7df_b1bd2126fb4b ; - owl:annotatedTarget "Screwing (screwing on, screwing in, screwing tight) is joining by pressing on by means of a self-locking thread (from: DIN 8593 Part 3/09.85)."^^xsd:string . + owl:annotatedSource ns1:EMMO_214e9a99_58de_40e2_86cf_fa6aa1d180a8 ; + owl:annotatedTarget "Widening is tensile forming to increase the circumference of a hollow body. A distinction is made between: Widening, bulging."^^xsd:string . [] a owl:Axiom ; - owl:annotatedProperty skos:prefLabel ; - owl:annotatedSource ns1:EMMO_02122e58_e0b3_4274_bdd4_745f64a61645 ; - owl:annotatedTarget "Factory"@en ; - ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin factor, from fact- ‘done’, from the verb facere (to do)."@en . + rdfs:seeAlso "ISO 13574:2015-02"^^xsd:string ; + owl:annotatedProperty rdfs:comment ; + owl:annotatedSource ns1:EMMO_92eaefcb_50be_4237_9ec0_4a019ce24921 ; + owl:annotatedTarget "Process for removing unwanted residual or waste material from a given product or material"^^xsd:string . [] a owl:Axiom ; - rdfs:seeAlso "DIN 8589-2:2003-09"^^xsd:string ; + rdfs:seeAlso "DIN EN 62047-1:2016-12"^^xsd:string ; owl:annotatedProperty rdfs:comment ; - owl:annotatedSource ns1:EMMO_c1dad83e_974f_432e_ac92_d016f2445279 ; - owl:annotatedTarget "machining with a circular cutting movement in which the axis of rotation of the tool and the axis of the internal surface to be produced are identical and the feed movement is in the direction of this axis. The axis of rotation of the cutting movement maintains its position relative to the workpiece independently of the feed movement (axis of rotation workpiece-bound)."^^xsd:string . + owl:annotatedSource ns1:EMMO_ecc10f05_b301_4dcf_8c84_b6f511117234 ; + owl:annotatedTarget "Process for joining two (base) materials by means of an adhesive polymer material"^^xsd:string . [] a owl:Axiom ; - rdfs:isDefinedBy "https://www.iso.org/obp/ui/#iso:std:iso:15531:-1:ed-1:v1:en:term:3.6.22"^^xsd:anyURI ; - owl:annotatedProperty rdfs:seeAlso ; - owl:annotatedSource ns1:EMMO_a4d66059_5dd3_4b90_b4cb_10960559441b ; - owl:annotatedTarget """ISO 15531-1:2004 -manufacturing: function or act of converting or transforming material from raw material or semi-finished state to a state of further completion"""@en . + rdfs:seeAlso "DIN 8583-1:2003-09"^^xsd:string ; + owl:annotatedProperty rdfs:comment ; + owl:annotatedSource ns1:EMMO_39d5c9c4_7d24_4409_ba3b_60ca3afde902 ; + owl:annotatedTarget "Forming of a solid body, whereby the plastic state is essentially brought about by uniaxial or multiaxial compressive stress."^^xsd:string . [] a owl:Axiom ; - rdfs:seeAlso "DIN 8589-3:2003-09"^^xsd:string ; + rdfs:seeAlso "https://en.wiktionary.org/wiki/workpiece"^^xsd:string ; owl:annotatedProperty rdfs:comment ; - owl:annotatedSource ns1:EMMO_44f91d47_3faf_48e2_844c_d44bbe3e22f6 ; - owl:annotatedTarget "Machining with a circular cutting movement, usually associated with a multi-toothed tool, and with a feed movement perpendicular or oblique to the axis of rotation of the tool, to produce any workpiece surface."^^xsd:string . + owl:annotatedSource ns1:EMMO_479db031_b344_4488_9efa_4bc12c6c1765 ; + owl:annotatedTarget "The raw material or partially finished piece that is shaped by performing various operations."^^xsd:string . [] a owl:Axiom ; - rdfs:isDefinedBy "https://www.iso.org/obp/ui/#iso:std:iso:15531:-1:ed-1:v1:en:term:3.6.9"^^xsd:anyURI ; - owl:annotatedProperty rdfs:seeAlso ; - owl:annotatedSource ns1:EMMO_8786cb47_8e1f_4968_9b15_f6d41fc51252 ; - owl:annotatedTarget """ISO 15531-1:2004 -discrete manufacturing: production of discrete items."""@en . + rdfs:seeAlso "DIN 8580:2022-12"^^xsd:string ; + owl:annotatedProperty skos:altLabel ; + owl:annotatedSource ns1:EMMO_46dc0d51_b60f_49cd_8650_9aba7be3726c ; + owl:annotatedTarget "Verfestigen durch Umformen"^^xsd:string . [] a owl:Axiom ; - rdfs:seeAlso "DIN 8590 Berichtigung 1:2004-02"^^xsd:string ; + owl:annotatedProperty skos:altLabel ; + owl:annotatedSource ns1:EMMO_494b372c_cfdf_47d3_a4de_5e037c540de8 ; + owl:annotatedTarget "Equipment"@en ; + ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From French équipement, from équiper ‘equip’."@en . + +[] a owl:Axiom ; + rdfs:seeAlso "ISO 23952:2020(en), 3.4.143"^^xsd:string ; owl:annotatedProperty rdfs:comment ; - owl:annotatedSource ns1:EMMO_1a2cbca8_3d3b_4e2c_9a71_e39273937786 ; - owl:annotatedTarget "Manufacturing by separating particles of material from a solid body by non-mechanical means. Ablation refers both to the removal of layers of material and to the separation of workpiece parts. The production process of ablation is considered in its stationary instantaneous state, independently of the application of auxiliary processes necessary to initiate the process. Ablation is divided into three subgroups according to the order point of view (OGP) \"process in the effective zone on the surface of the workpiece\": - thermal ablation; - chemical ablation; - electrochemical ablation."^^xsd:string . + owl:annotatedSource ns1:EMMO_479db031_b344_4488_9efa_4bc12c6c1765 ; + owl:annotatedTarget "a physical artifact, real or virtual, intended for subsequent transformation within some manufacturing operation"^^xsd:string . [] a owl:Axiom ; - rdfs:seeAlso "DIN 8585-3:2003-09"^^xsd:string ; + rdfs:seeAlso "DIN 65099-5:1989-11"^^xsd:string ; owl:annotatedProperty rdfs:comment ; - owl:annotatedSource ns1:EMMO_214e9a99_58de_40e2_86cf_fa6aa1d180a8 ; - owl:annotatedTarget "Widening is tensile forming to increase the circumference of a hollow body. A distinction is made between: Widening, bulging."^^xsd:string . + owl:annotatedSource ns1:EMMO_4f46c5ab_1c21_4639_90d5_3c4ebf3b156b ; + owl:annotatedTarget "Nailing is joining by hammering or pressing nails (wire pins) as auxiliary parts into the solid material. Several parts are joined by pressing them together (from: DIN 8593 part 3/09.85)."^^xsd:string . [] a owl:Axiom ; - rdfs:seeAlso "DIN 8590 Berichtigung 1:2004-02"^^xsd:string ; + rdfs:seeAlso "https://de.wikipedia.org/wiki/Werkst%C3%BCck"^^xsd:string ; owl:annotatedProperty rdfs:comment ; - owl:annotatedSource ns1:EMMO_b8ce01a5_1e0c_4c69_8e54_7235fd4fe47e ; - owl:annotatedTarget "A manufacturing process in which metallic material is anodically dissolved under the influence of an electric current and an electrolyte solution. The current flow can be caused either by connection to an external current source or due to local element formation on the workpiece (etching)."^^xsd:string . + owl:annotatedSource ns1:EMMO_479db031_b344_4488_9efa_4bc12c6c1765 ; + owl:annotatedTarget "In manufacturing, a workpiece is a single, delimited part of largely solid material that is processed in some form (e.g. stone )."^^xsd:string . [] a owl:Axiom ; - rdfs:seeAlso "DIN 65099-3:1989-11"^^xsd:string ; + rdfs:seeAlso "ISO/TR 10809-1:2009, 0000_19"^^xsd:string ; + owl:annotatedProperty ns1:EMMO_c7b62dd7_063a_4c2a_8504_42f7264ba83f ; + owl:annotatedSource ns1:EMMO_7cd8a4ec_b219_498e_b696_028257163aa4 ; + owl:annotatedTarget "Heat treatment process that generally produces martensite in the matrix."^^xsd:string . + +[] a owl:Axiom ; + rdfs:seeAlso "DIN 8583-2:2003-09"^^xsd:string ; owl:annotatedProperty rdfs:comment ; - owl:annotatedSource ns1:EMMO_46f70544_818e_495e_99ef_d342c54ee7dc ; - owl:annotatedTarget "Shot peening is shot peening for shaping or straightening workpieces by introducing residual compressive stresses (from: DIN 8200/10.82)."^^xsd:string . + owl:annotatedSource ns1:EMMO_91c2db4b_83e2_4c36_aadf_453acc72e6d2 ; + owl:annotatedTarget "Continuous or stepwise pressure forming with one or more rotating tools (rollers), without or with additional tools, e.g. plugs or mandrels, rods, guide tools"^^xsd:string . [] a owl:Axiom ; - rdfs:seeAlso "DIN 8584-1:2003-09"^^xsd:string ; + rdfs:seeAlso "ISO/ASTM 52900:2021(en), 3.3.1"^^xsd:string ; owl:annotatedProperty rdfs:comment ; - owl:annotatedSource ns1:EMMO_6fba4018_24bd_450c_abc3_354e2c7809c9 ; - owl:annotatedTarget "Forming of a solid body, whereby the plastic state is essentially brought about by a combined tensile and compressive stress."^^xsd:string . + owl:annotatedSource ns1:EMMO_253e1d54_69af_4931_90d0_5ccfd7e690ad ; + owl:annotatedTarget """fabrication of objects through the deposition of a material using a print head, nozzle or another printer technology +Note 1 to entry: This term is often used in a non-technical context synonymously with additive manufacturing (3.1.2) and, in these cases, typically associated with machines used for non-industrial purposes including personal use."""^^xsd:string . [] a owl:Axiom ; - rdfs:seeAlso "DIN 8593-3:2003-09"^^xsd:string ; + rdfs:seeAlso "ISO 14034:2016-11"^^xsd:string ; owl:annotatedProperty rdfs:comment ; - owl:annotatedSource ns1:EMMO_bbf12904_e25e_4f49_87f3_8bd210a6b535 ; - owl:annotatedTarget "A collective term for the processes in which, during joining, the parts to be joined and any auxiliary parts are essentially only elastically deformed and unintentional loosening is prevented by frictional connection."^^xsd:string . + owl:annotatedSource ns1:EMMO_2b9cbfb5_dbd0_4a68_9c6f_acc41b40dd72 ; + owl:annotatedTarget "application of scientific knowledge, tools, techniques, crafts or systems in order to solve a problem or to achieve an objective which can result in a product or process"^^xsd:string . [] a owl:Axiom ; - rdfs:seeAlso "DIN 8584-2:2003-09"^^xsd:string ; + rdfs:seeAlso "DIN 65099-5:1989-11"^^xsd:string ; owl:annotatedProperty rdfs:comment ; - owl:annotatedSource ns1:EMMO_01048432_3722_40a9_aa37_ea009da44272 ; - owl:annotatedTarget "Draw forming by drawing a workpiece through a tool opening that is narrowed in the drawing direction."^^xsd:string . + owl:annotatedSource ns1:EMMO_410b5956_a06d_4370_b7df_b1bd2126fb4b ; + owl:annotatedTarget "Screwing (screwing on, screwing in, screwing tight) is joining by pressing on by means of a self-locking thread (from: DIN 8593 Part 3/09.85)."^^xsd:string . [] a owl:Axiom ; - rdfs:seeAlso "DIN 65099-4:1989-11"^^xsd:string ; - owl:annotatedProperty ns1:EMMO_c7b62dd7_063a_4c2a_8504_42f7264ba83f ; - owl:annotatedSource ns1:EMMO_c9f0abb6_d3e8_459e_bacc_c14ed5481998 ; - owl:annotatedTarget "Thermal ablation is the separation of material particles in solid, liquid or gaseous state by heat processes as well as the removal of these material particles by mechanical or electromagnetic forces (from: DIN"^^xsd:string . + rdfs:isDefinedBy "https://www.iso.org/obp/ui/#iso:std:iso:3252:ed-5:v1:en:term:3.3.55"^^xsd:anyURI ; + owl:annotatedProperty rdfs:seeAlso ; + owl:annotatedSource ns1:EMMO_2b524942_4e3e_403a_b4ab_2b53750f3d3b ; + owl:annotatedTarget """ISO 3252:2019 Powder metallurgy +reaction sintering: process wherein at least two constituents of a powder mixture react during sintering"""@en . + +[] a swrl:Imp ; + rdfs:comment "Implementation of equality based on mereology."^^rdfs:Literal ; + swrl:body [ a swrl:AtomList ; + rdf:first [ a swrl:IndividualPropertyAtom ; + swrl:argument1 ; + swrl:argument2 ; + swrl:propertyPredicate ns1:EMMO_17e27c22_37e1_468c_9dd7_95e137f73e7f ] ; + rdf:rest [ a swrl:AtomList ; + rdf:first [ a swrl:IndividualPropertyAtom ; + swrl:argument1 ; + swrl:argument2 ; + swrl:propertyPredicate ns1:EMMO_17e27c22_37e1_468c_9dd7_95e137f73e7f ] ; + rdf:rest () ] ] ; + swrl:head [ a swrl:AtomList ; + rdf:first [ a swrl:SameIndividualAtom ; + swrl:argument1 ; + swrl:argument2 ] ; + rdf:rest () ] . [] a owl:Axiom ; - owl:annotatedProperty skos:prefLabel ; - owl:annotatedSource ns1:EMMO_5c68497d_2544_4cd4_897b_1ea783c9f6fe ; - owl:annotatedTarget "Tool"@en ; - ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "Old English tōl, from a Germanic base meaning ‘prepare’."@en . + owl:annotatedProperty ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 ; + owl:annotatedSource ns1:EMMO_0c7ad550_00ae_45ff_a4e2_58d6a61f48eb ; + owl:annotatedTarget "A supply chain is a system of organizations, people, activities, information, and resources involved in supplying a product or service to a consumer."@en ; + ns1:EMMO_c84c6752_6d64_48cc_9500_e54a3c34898d "https://en.wikipedia.org/wiki/Supply_chain"^^xsd:string . [] a owl:Axiom ; - owl:annotatedProperty skos:prefLabel ; - owl:annotatedSource ns1:EMMO_6c03574f_6daa_4488_a970_ee355cca2530 ; - owl:annotatedTarget "CausalParticle"@en ; - ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin particula (“small part, particle”), diminutive of pars (“part, piece”)."@en . + rdfs:isDefinedBy "https://www.iso.org/obp/ui/#iso:std:iso:3252:ed-5:v1:en:term:3.3.60"^^xsd:anyURI ; + owl:annotatedProperty rdfs:seeAlso ; + owl:annotatedSource ns1:EMMO_03441eb3_d1fd_4906_b953_b83312d7589e ; + owl:annotatedTarget """ISO 3252:2019 Powder metallurgy +sintering: thermal treatment of a powder or compact, at a temperature below the melting point of the main constituent, for the purpose of increasing its strength by the metallurgical bonding of its particles"""@en . [] a owl:Axiom ; - rdfs:seeAlso "DIN EN 13831:2007-12"^^xsd:string ; + rdfs:seeAlso "DIN 8593-0:2003-09"^^xsd:string ; owl:annotatedProperty rdfs:comment ; - owl:annotatedSource ns1:EMMO_ecf78412_f0ca_4368_9078_559ffe8935d3 ; - owl:annotatedTarget "Forming of vessel parts from a flat mould into a three-dimensional shape by means of a press and tools, whereby material is neither removed nor added"^^xsd:string . + owl:annotatedSource ns1:EMMO_6ab555fd_5803_4f03_82e8_127c01aabfea ; + owl:annotatedTarget "The permanent joining or other bringing together of two or more workpieces of a geometric shape or of similar workpieces with shapeless material. In each case, the cohesion is created locally and increased as a whole."^^xsd:string . [] a owl:Axiom ; - owl:annotatedProperty skos:prefLabel ; - owl:annotatedSource ns1:EMMO_82fc8506_1f84_4add_9683_abea077bd1e3 ; - owl:annotatedTarget "Product"@en ; - ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin productum ‘something produced’, derived from Latin producere, from pro- ‘forward’ + ducere ‘to lead’."@en . + rdfs:seeAlso "DIN 65099-3:1989-11"^^xsd:string ; + owl:annotatedProperty rdfs:comment ; + owl:annotatedSource ns1:EMMO_6800c3fd_bf5d_4a2a_8e6e_9e909eefc16c ; + owl:annotatedTarget "Free forming is pressure forming with tools that do not or only partially contain the shape of the workpiece and move against each other (from: DIN 8583 Part 3/05.70)."^^xsd:string . [] a owl:Axiom ; rdfs:seeAlso "ISO 23704-1:2022(en), 3.1.2"^^xsd:string ; @@ -20337,252 +20278,227 @@ discrete manufacturing: production of discrete items."""@en . owl:annotatedTarget "process of joining materials to make parts from 3D model data, usually layer upon layer, as opposed to subtractive manufacturing (3.1.29) and formative manufacturing methodologies,"^^xsd:string . [] a owl:Axiom ; - owl:annotatedProperty ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 ; - owl:annotatedSource ns1:EMMO_0c7ad550_00ae_45ff_a4e2_58d6a61f48eb ; - owl:annotatedTarget "A supply chain is a system of organizations, people, activities, information, and resources involved in supplying a product or service to a consumer."@en ; - ns1:EMMO_c84c6752_6d64_48cc_9500_e54a3c34898d "https://en.wikipedia.org/wiki/Supply_chain"^^xsd:string . + rdfs:isDefinedBy "https://www.iso.org/obp/ui/#iso:std:iso:15531:-1:ed-1:v1:en:term:3.6.22"^^xsd:anyURI ; + owl:annotatedProperty rdfs:seeAlso ; + owl:annotatedSource ns1:EMMO_a4d66059_5dd3_4b90_b4cb_10960559441b ; + owl:annotatedTarget """ISO 15531-1:2004 +manufacturing: function or act of converting or transforming material from raw material or semi-finished state to a state of further completion"""@en . [] a owl:Axiom ; - rdfs:seeAlso "DIN EN ISO 4885:2018-07"^^xsd:string ; - owl:annotatedProperty ns1:EMMO_c7b62dd7_063a_4c2a_8504_42f7264ba83f ; - owl:annotatedSource ns1:EMMO_61846411_8c6f_410b_ae7b_8999ec18f2b2 ; - owl:annotatedTarget "Treatment carried out after hardening or case hardening consisting of cooling to a temperature below room temperature to complete the transformation of austenite to martensite"^^xsd:string . + rdfs:isDefinedBy "https://www.iso.org/obp/ui/#iso:std:iso:8887:-1:ed-1:v1:en:term:3.1.5"^^xsd:anyURI ; + owl:annotatedProperty rdfs:seeAlso ; + owl:annotatedSource ns1:EMMO_8786cb47_8e1f_4968_9b15_f6d41fc51252 ; + owl:annotatedTarget """ISO 8887-1:2017 +manufacturing: production of components"""@en . [] a owl:Axiom ; - rdfs:seeAlso "DIN EN 14943:2006-03"^^xsd:string ; - owl:annotatedProperty rdfs:comment ; - owl:annotatedSource ns1:EMMO_2b9cbfb5_dbd0_4a68_9c6f_acc41b40dd72 ; - owl:annotatedTarget "Conversion of materials and assembly of components for the manufacture of products"^^xsd:string . + rdfs:seeAlso "DIN 65099-7:1989-11"^^xsd:string ; + owl:annotatedProperty ns1:EMMO_c7b62dd7_063a_4c2a_8504_42f7264ba83f ; + owl:annotatedSource ns1:EMMO_607ccc15_38aa_4a69_a70a_effa8015bf42 ; + owl:annotatedTarget "Strengthening by rolling is the strengthening of component surfaces by mechanically generating compressive stresses in the component surface and consolidating the material."^^xsd:string . [] a owl:Axiom ; - owl:annotatedProperty skos:prefLabel ; - owl:annotatedSource ns1:EMMO_912ac3a2_a124_4233_92dd_06c9aebea46c ; - owl:annotatedTarget "Assemblying"@en ; - ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Old French asembler, based on Latin ad- ‘to’ + simul ‘together’."@en . + rdfs:seeAlso "DIN EN 10210-3:2020-11"^^xsd:string ; + owl:annotatedProperty ns1:EMMO_c7b62dd7_063a_4c2a_8504_42f7264ba83f ; + owl:annotatedSource ns1:EMMO_6fa330f7_3289_4228_81df_12ee8a9708ac ; + owl:annotatedTarget "Process consisting of two steps: - first, the steel is heated in a quenching treatment to a temperature above Ac3 and then rapidly cooled in a liquid to produce a process-specific grain structure; - subsequently, the steel is heated to a specific temperature during tempering to set the desired property and cooled in air."^^xsd:string . [] a owl:Axiom ; - rdfs:seeAlso "ISO 14034:2016-11"^^xsd:string ; - owl:annotatedProperty rdfs:comment ; - owl:annotatedSource ns1:EMMO_2b9cbfb5_dbd0_4a68_9c6f_acc41b40dd72 ; - owl:annotatedTarget "application of scientific knowledge, tools, techniques, crafts or systems in order to solve a problem or to achieve an objective which can result in a product or process"^^xsd:string . + rdfs:seeAlso "EN 10028-1:2017-07"^^xsd:string ; + owl:annotatedProperty ns1:EMMO_c7b62dd7_063a_4c2a_8504_42f7264ba83f ; + owl:annotatedSource ns1:EMMO_9900d51c_bdd3_40e8_aa82_ad1aa7092f71 ; + owl:annotatedTarget "heat treatment consisting of heating and soaking at a suitable temperature, followed by cooling under conditions such that, after return to ambient temperature, the metal will be in a structural state closer to that of equilibrium"^^xsd:string . [] a owl:Axiom ; - rdfs:seeAlso "DIN 8589-0:2003-09"^^xsd:string ; - owl:annotatedProperty skos:altLabel ; - owl:annotatedSource ns1:EMMO_8679c7d3_fd5d_49ba_bc1f_1bb820a1f73f ; - owl:annotatedTarget "Machining in which a tool is used whose number of cutting edges, geometry of the cutting wedges and position of the cutting edges in relation to the workpiece are determined"^^xsd:string . + rdfs:seeAlso "DIN 8586:2003-09"^^xsd:string ; + owl:annotatedProperty rdfs:comment ; + owl:annotatedSource ns1:EMMO_aced32dd_1a13_49b0_8d8f_c79313942d19 ; + owl:annotatedTarget "Forming of a solid body, whereby the plastic state is essentially brought about by a bending stress."^^xsd:string . [] a owl:Axiom ; - owl:annotatedProperty skos:altLabel ; - owl:annotatedSource ns1:EMMO_86ca9b93_1183_4b65_81b8_c0fcd3bba5ad ; - owl:annotatedTarget "Engineered"@en ; - ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin ingenium \"innate qualities, ability; inborn character,\" in Late Latin \"a war engine, battering ram\"; literally \"that which is inborn,\" from in- (\"in\") + gignere (\"give birth, beget\")."@en . + rdfs:seeAlso "DIN 8588:2013-08"^^xsd:string ; + owl:annotatedProperty rdfs:comment ; + owl:annotatedSource ns1:EMMO_d5f98475_00ce_4987_99fb_262aed395e46 ; + owl:annotatedTarget "Mechanical separation of workpieces without the formation of shapeless material, i.e. also without chips (chipless)."^^xsd:string . [] a owl:Axiom ; - rdfs:isDefinedBy "https://www.iso.org/obp/ui/#iso:std:iso:18435:-1:ed-1:v1:en:term:3.16"^^xsd:anyURI ; - owl:annotatedProperty rdfs:seeAlso ; - owl:annotatedSource ns1:EMMO_a4d66059_5dd3_4b90_b4cb_10960559441b ; - owl:annotatedTarget """ISO 18435-1:2009 -manufacturing process: set of processes in manufacturing involving a flow and/or transformation of material, information, energy, control, or any other element in a manufacturing area"""@en . + rdfs:seeAlso "DIN EN ISO 5349-2:2015-12"^^xsd:string ; + owl:annotatedProperty rdfs:comment ; + owl:annotatedSource ns1:EMMO_479db031_b344_4488_9efa_4bc12c6c1765 ; + owl:annotatedTarget "Object that is processed with a machine"^^xsd:string . [] a owl:Axiom ; - owl:annotatedProperty skos:altLabel ; - owl:annotatedSource ns1:EMMO_494b372c_cfdf_47d3_a4de_5e037c540de8 ; - owl:annotatedTarget "Machine"@en ; - ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin māchina (“a machine, engine, contrivance, device, stratagem, trick”), from Doric Greek μᾱχᾰνᾱ́ (mākhanā́), cognate with Attic Greek μηχᾰνή (mēkhanḗ, “a machine, engine, contrivance, device”), from which comes mechanical."@en . + rdfs:seeAlso "DIN EN ISO 4885:2018-07"^^xsd:string ; + owl:annotatedProperty ns1:EMMO_c7b62dd7_063a_4c2a_8504_42f7264ba83f ; + owl:annotatedSource ns1:EMMO_61846411_8c6f_410b_ae7b_8999ec18f2b2 ; + owl:annotatedTarget "Treatment carried out after hardening or case hardening consisting of cooling to a temperature below room temperature to complete the transformation of austenite to martensite"^^xsd:string . [] a owl:Axiom ; - owl:annotatedProperty skos:prefLabel ; - owl:annotatedSource ns1:EMMO_a4d66059_5dd3_4b90_b4cb_10960559441b ; - owl:annotatedTarget "Manufacturing"@en ; - ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin manu factum (\"made by hand\")."@en . + rdfs:seeAlso "DIN EN 14943:2006-03"^^xsd:string ; + owl:annotatedProperty rdfs:comment ; + owl:annotatedSource ns1:EMMO_2b9cbfb5_dbd0_4a68_9c6f_acc41b40dd72 ; + owl:annotatedTarget "Conversion of materials and assembly of components for the manufacture of products"^^xsd:string . [] a owl:Axiom ; - rdfs:seeAlso "DIN 55405:2014-12"^^xsd:string ; + rdfs:seeAlso "ISO 4885:2018-02"^^xsd:string ; + owl:annotatedProperty ns1:EMMO_c7b62dd7_063a_4c2a_8504_42f7264ba83f ; + owl:annotatedSource ns1:EMMO_3c7affee_09ed_42e7_a190_4a10c75ab6dd ; + owl:annotatedTarget "hardening of a workpiece caused by the precipitation of one or more compounds from a supersaturated solid solution"^^xsd:string . + +[] a owl:Axiom ; + rdfs:seeAlso "https://en.wikipedia.org/wiki/Technology"^^xsd:string ; owl:annotatedProperty rdfs:comment ; - owl:annotatedSource ns1:EMMO_c790c7ff_2d10_4336_94ad_4f4e173109a9 ; - owl:annotatedTarget "Method of joining metallic materials with the aid of a molten filler metal (solder), optionally with the use of flow agents"^^xsd:string . + owl:annotatedSource ns1:EMMO_2b9cbfb5_dbd0_4a68_9c6f_acc41b40dd72 ; + owl:annotatedTarget "Technology is the application of knowledge for achieving practical goals in a reproducible way."^^xsd:string . [] a owl:Axiom ; - owl:annotatedProperty skos:altLabel ; - owl:annotatedSource ns1:EMMO_86ca9b93_1183_4b65_81b8_c0fcd3bba5ad ; - owl:annotatedTarget "Artifact"@en ; - ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin arte ‘by or using art’ + factum ‘something made’."@en . + owl:annotatedProperty skos:prefLabel ; + owl:annotatedSource ns1:EMMO_02122e58_e0b3_4274_bdd4_745f64a61645 ; + owl:annotatedTarget "Factory"@en ; + ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin factor, from fact- ‘done’, from the verb facere (to do)."@en . [] a owl:Axiom ; - rdfs:isDefinedBy "https://www.iso.org/obp/ui/#iso:std:iso:3252:ed-5:v1:en:term:3.3.32"^^xsd:anyURI ; - owl:annotatedProperty rdfs:seeAlso ; - owl:annotatedSource ns1:EMMO_3cb27225_df45_4616_aa3b_32dba383524c ; - owl:annotatedTarget """ISO 3252:2019 Powder metallurgy -liquid-phase sintering: sintering of a powder or compact containing at least two constituents, under conditions such that a liquid phase is formed"""@en . + rdfs:seeAlso "https://www.collinsdictionary.com/it/dizionario/inglese/technology"^^xsd:string ; + owl:annotatedProperty rdfs:comment ; + owl:annotatedSource ns1:EMMO_2b9cbfb5_dbd0_4a68_9c6f_acc41b40dd72 ; + owl:annotatedTarget "Technology refers to methods, systems, and devices which are the result of scientific knowledge being used for practical purposes."^^xsd:string . [] a owl:Axiom ; - owl:annotatedProperty skos:altLabel ; - owl:annotatedSource ns1:EMMO_86ca9b93_1183_4b65_81b8_c0fcd3bba5ad ; - owl:annotatedTarget "TangibleProduct"@en ; - ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From late Latin tangibilis, from tangere ‘to touch’."@en . + owl:annotatedProperty skos:prefLabel ; + owl:annotatedSource ns1:EMMO_5c68497d_2544_4cd4_897b_1ea783c9f6fe ; + owl:annotatedTarget "Tool"@en ; + ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "Old English tōl, from a Germanic base meaning ‘prepare’."@en . [] a swrl:Imp ; - rdfs:comment "Implementation of equality based on mereology."^^rdfs:Literal ; swrl:body [ a swrl:AtomList ; rdf:first [ a swrl:IndividualPropertyAtom ; swrl:argument1 ; swrl:argument2 ; - swrl:propertyPredicate ns1:EMMO_17e27c22_37e1_468c_9dd7_95e137f73e7f ] ; - rdf:rest [ a swrl:AtomList ; - rdf:first [ a swrl:IndividualPropertyAtom ; - swrl:argument1 ; - swrl:argument2 ; - swrl:propertyPredicate ns1:EMMO_17e27c22_37e1_468c_9dd7_95e137f73e7f ] ; - rdf:rest () ] ] ; + swrl:propertyPredicate ns1:EMMO_d67ee67e_4fac_4676_82c9_aec361dba698 ] ; + rdf:rest () ] ; swrl:head [ a swrl:AtomList ; - rdf:first [ a swrl:SameIndividualAtom ; + rdf:first [ a swrl:IndividualPropertyAtom ; swrl:argument1 ; - swrl:argument2 ] ; - rdf:rest () ] . + swrl:argument2 ; + swrl:propertyPredicate ns1:EMMO_aa987900_caf1_4ce2_82fa_6b1d6fbd2ead ] ; + rdf:rest () ] ; + ns1:EMMO_c7b62dd7_063a_4c2a_8504_42f7264ba83f "Enforcing exclusivity between overlapping and causality."@en . [] a owl:Axiom ; - rdfs:seeAlso "ISO/TR 10809-1:2009, 0000_19"^^xsd:string ; - owl:annotatedProperty ns1:EMMO_c7b62dd7_063a_4c2a_8504_42f7264ba83f ; - owl:annotatedSource ns1:EMMO_7cd8a4ec_b219_498e_b696_028257163aa4 ; - owl:annotatedTarget "Heat treatment process that generally produces martensite in the matrix."^^xsd:string . + rdfs:seeAlso "DIN 8586:2003-09"^^xsd:string ; + owl:annotatedProperty rdfs:comment ; + owl:annotatedSource ns1:EMMO_68ee441e_c89e_4391_93c3_e68fef59fe14 ; + owl:annotatedTarget "Forming of a solid body, whereby the plastic state is essentially brought about by a bending stress"^^xsd:string . [] a owl:Axiom ; - rdfs:seeAlso "DIN EN ISO 5349-2:2015-12"^^xsd:string ; + rdfs:seeAlso "DIN EN ISO 472/A1:2019-03"^^xsd:string ; owl:annotatedProperty rdfs:comment ; - owl:annotatedSource ns1:EMMO_479db031_b344_4488_9efa_4bc12c6c1765 ; - owl:annotatedTarget "Object that is processed with a machine"^^xsd:string . + owl:annotatedSource ns1:EMMO_f5655090_2266_41cb_b2e9_3b4569c45731 ; + owl:annotatedTarget "Type of scratching behaviour where the scratching force and the (displacement) deflection of the scratching tip are constant over the scratching distance during the test."^^xsd:string . [] a owl:Axiom ; - owl:annotatedProperty skos:altLabel ; - owl:annotatedSource ns1:EMMO_494b372c_cfdf_47d3_a4de_5e037c540de8 ; - owl:annotatedTarget "Equipment"@en ; - ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From French équipement, from équiper ‘equip’."@en . + owl:annotatedProperty skos:prefLabel ; + owl:annotatedSource ns1:EMMO_a4d66059_5dd3_4b90_b4cb_10960559441b ; + owl:annotatedTarget "Manufacturing"@en ; + ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin manu factum (\"made by hand\")."@en . [] a owl:Axiom ; - rdfs:seeAlso "DIN EN 12258-1:2012-08"^^xsd:string ; - owl:annotatedProperty rdfs:comment ; - owl:annotatedSource ns1:EMMO_2138677c_845a_4bc2_8be7_7b0a07b4777d ; - owl:annotatedTarget "Removal of material by means of rigid or flexible discs or belts containing abrasives."^^xsd:string . + owl:annotatedProperty skos:altLabel ; + owl:annotatedSource ns1:EMMO_86ca9b93_1183_4b65_81b8_c0fcd3bba5ad ; + owl:annotatedTarget "TangibleProduct"@en ; + ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From late Latin tangibilis, from tangere ‘to touch’."@en . [] a owl:Axiom ; - rdfs:seeAlso "ISO/ASTM 52900:2021(en), 3.3.1"^^xsd:string ; - owl:annotatedProperty rdfs:comment ; - owl:annotatedSource ns1:EMMO_253e1d54_69af_4931_90d0_5ccfd7e690ad ; - owl:annotatedTarget """fabrication of objects through the deposition of a material using a print head, nozzle or another printer technology -Note 1 to entry: This term is often used in a non-technical context synonymously with additive manufacturing (3.1.2) and, in these cases, typically associated with machines used for non-industrial purposes including personal use."""^^xsd:string . + rdfs:seeAlso "DIN 65099-4:1989-11"^^xsd:string ; + owl:annotatedProperty ns1:EMMO_c7b62dd7_063a_4c2a_8504_42f7264ba83f ; + owl:annotatedSource ns1:EMMO_c9f0abb6_d3e8_459e_bacc_c14ed5481998 ; + owl:annotatedTarget "Thermal ablation is the separation of material particles in solid, liquid or gaseous state by heat processes as well as the removal of these material particles by mechanical or electromagnetic forces (from: DIN"^^xsd:string . [] a owl:Axiom ; rdfs:seeAlso "DIN 65099-3:1989-11"^^xsd:string ; owl:annotatedProperty rdfs:comment ; - owl:annotatedSource ns1:EMMO_6800c3fd_bf5d_4a2a_8e6e_9e909eefc16c ; - owl:annotatedTarget "Free forming is pressure forming with tools that do not or only partially contain the shape of the workpiece and move against each other (from: DIN 8583 Part 3/05.70)."^^xsd:string . + owl:annotatedSource ns1:EMMO_46f70544_818e_495e_99ef_d342c54ee7dc ; + owl:annotatedTarget "Shot peening is shot peening for shaping or straightening workpieces by introducing residual compressive stresses (from: DIN 8200/10.82)."^^xsd:string . [] a owl:Axiom ; - rdfs:seeAlso "DIN 8589-6:2003-09"^^xsd:string ; + rdfs:seeAlso "DIN EN 13831:2007-12"^^xsd:string ; owl:annotatedProperty rdfs:comment ; - owl:annotatedSource ns1:EMMO_c7d004db_59fa_5ae3_adb1_e75736aa721a ; - owl:annotatedTarget "Cutting with circular or straight cutting motion, using a multi-toothed tool of small cutting width, the cutting motion being performed by the tool"^^xsd:string . + owl:annotatedSource ns1:EMMO_ecf78412_f0ca_4368_9078_559ffe8935d3 ; + owl:annotatedTarget "Forming of vessel parts from a flat mould into a three-dimensional shape by means of a press and tools, whereby material is neither removed nor added"^^xsd:string . [] a owl:Axiom ; - rdfs:seeAlso "https://de.wikipedia.org/wiki/Werkst%C3%BCck"^^xsd:string ; + rdfs:seeAlso "DIN 8587:2003-09"^^xsd:string ; owl:annotatedProperty rdfs:comment ; - owl:annotatedSource ns1:EMMO_479db031_b344_4488_9efa_4bc12c6c1765 ; - owl:annotatedTarget "In manufacturing, a workpiece is a single, delimited part of largely solid material that is processed in some form (e.g. stone )."^^xsd:string . + owl:annotatedSource ns1:EMMO_22744495_4f32_4a17_b189_259c644268f9 ; + owl:annotatedTarget "Forming of a solid body, whereby the plastic state is essentially brought about by shear stress."^^xsd:string . [] a owl:Axiom ; - rdfs:seeAlso "DIN 8593-0:2003-09"^^xsd:string ; + rdfs:seeAlso "DIN 8590 Berichtigung 1:2004-02"^^xsd:string ; owl:annotatedProperty rdfs:comment ; - owl:annotatedSource ns1:EMMO_6ab555fd_5803_4f03_82e8_127c01aabfea ; - owl:annotatedTarget "The permanent joining or other bringing together of two or more workpieces of a geometric shape or of similar workpieces with shapeless material. In each case, the cohesion is created locally and increased as a whole."^^xsd:string . + owl:annotatedSource ns1:EMMO_b8ce01a5_1e0c_4c69_8e54_7235fd4fe47e ; + owl:annotatedTarget "A manufacturing process in which metallic material is anodically dissolved under the influence of an electric current and an electrolyte solution. The current flow can be caused either by connection to an external current source or due to local element formation on the workpiece (etching)."^^xsd:string . [] a owl:Axiom ; - rdfs:seeAlso "DIN 8588:2013-08"^^xsd:string ; + rdfs:seeAlso "DIN 8584-1:2003-09"^^xsd:string ; owl:annotatedProperty rdfs:comment ; - owl:annotatedSource ns1:EMMO_1d6b63d5_9938_483c_ad62_a09ac34153c9 ; - owl:annotatedTarget "Cutting workpieces between two cutting edges that move past each other (see Figure 1 [see figure in the standard])."^^xsd:string . - -[] a owl:Axiom ; - rdfs:isDefinedBy "https://www.iso.org/obp/ui/#iso:std:iso:3252:ed-5:v1:en:term:3.3.60"^^xsd:anyURI ; - owl:annotatedProperty rdfs:seeAlso ; - owl:annotatedSource ns1:EMMO_03441eb3_d1fd_4906_b953_b83312d7589e ; - owl:annotatedTarget """ISO 3252:2019 Powder metallurgy -sintering: thermal treatment of a powder or compact, at a temperature below the melting point of the main constituent, for the purpose of increasing its strength by the metallurgical bonding of its particles"""@en . + owl:annotatedSource ns1:EMMO_6fba4018_24bd_450c_abc3_354e2c7809c9 ; + owl:annotatedTarget "Forming of a solid body, whereby the plastic state is essentially brought about by a combined tensile and compressive stress."^^xsd:string . [] a owl:Axiom ; - rdfs:seeAlso "DIN 65099-7:1989-11"^^xsd:string ; - owl:annotatedProperty ns1:EMMO_c7b62dd7_063a_4c2a_8504_42f7264ba83f ; - owl:annotatedSource ns1:EMMO_dc0874e8_36e1_44df_947d_0d7c81167a09 ; - owl:annotatedTarget "(according to DIN 8200) Shot peening to generate residual compressive stresses in layers of the blasting material close to the surface in order to improve certain component properties, e.g. fatigue strength, corrosion resistance, wear resistance (from: DIN 8200:1982)"^^xsd:string . + rdfs:seeAlso "DIN 55405:2014-12"^^xsd:string ; + owl:annotatedProperty rdfs:comment ; + owl:annotatedSource ns1:EMMO_c790c7ff_2d10_4336_94ad_4f4e173109a9 ; + owl:annotatedTarget "Method of joining metallic materials with the aid of a molten filler metal (solder), optionally with the use of flow agents"^^xsd:string . [] a owl:Axiom ; - rdfs:seeAlso "DIN 8586:2003-09"^^xsd:string ; + rdfs:seeAlso "DIN 8584-2:2003-09"^^xsd:string ; owl:annotatedProperty rdfs:comment ; - owl:annotatedSource ns1:EMMO_aced32dd_1a13_49b0_8d8f_c79313942d19 ; - owl:annotatedTarget "Forming of a solid body, whereby the plastic state is essentially brought about by a bending stress."^^xsd:string . + owl:annotatedSource ns1:EMMO_01048432_3722_40a9_aa37_ea009da44272 ; + owl:annotatedTarget "Draw forming by drawing a workpiece through a tool opening that is narrowed in the drawing direction."^^xsd:string . [] a owl:Axiom ; - rdfs:seeAlso "DIN EN 62047-1:2016-12"^^xsd:string ; + rdfs:seeAlso "DIN EN 13956:2013-03"^^xsd:string ; owl:annotatedProperty rdfs:comment ; - owl:annotatedSource ns1:EMMO_ecc10f05_b301_4dcf_8c84_b6f511117234 ; - owl:annotatedTarget "Process for joining two (base) materials by means of an adhesive polymer material"^^xsd:string . + owl:annotatedSource ns1:EMMO_06c415dc_ba26_407d_b596_283bd4d9a66f ; + owl:annotatedTarget "Joining process by softening the surfaces to be joined, either by heat or with a solvent (swelling welding, solvent welding), and pressing the softened surfaces together."^^xsd:string . [] a owl:Axiom ; - rdfs:seeAlso "DIN 65099-7:1989-11"^^xsd:string ; - owl:annotatedProperty ns1:EMMO_c7b62dd7_063a_4c2a_8504_42f7264ba83f ; - owl:annotatedSource ns1:EMMO_607ccc15_38aa_4a69_a70a_effa8015bf42 ; - owl:annotatedTarget "Strengthening by rolling is the strengthening of component surfaces by mechanically generating compressive stresses in the component surface and consolidating the material."^^xsd:string . + rdfs:isDefinedBy "https://www.iso.org/obp/ui/#iso:std:iso:3252:ed-5:v1:en:term:3.3.33"^^xsd:anyURI ; + owl:annotatedProperty rdfs:seeAlso ; + owl:annotatedSource ns1:EMMO_3ec45f3b_677d_4e71_be75_6f8966b4f808 ; + owl:annotatedTarget """ISO 3252:2019 Powder metallurgy +loose-powder sintering, gravity sintering: sintering of uncompacted powder"""@en . [] a owl:Axiom ; - rdfs:seeAlso "ISO 4885:2018-02"^^xsd:string ; - owl:annotatedProperty ns1:EMMO_c7b62dd7_063a_4c2a_8504_42f7264ba83f ; - owl:annotatedSource ns1:EMMO_3c7affee_09ed_42e7_a190_4a10c75ab6dd ; - owl:annotatedTarget "hardening of a workpiece caused by the precipitation of one or more compounds from a supersaturated solid solution"^^xsd:string . + owl:annotatedProperty skos:prefLabel ; + owl:annotatedSource ns1:EMMO_82fc8506_1f84_4add_9683_abea077bd1e3 ; + owl:annotatedTarget "Product"@en ; + ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin productum ‘something produced’, derived from Latin producere, from pro- ‘forward’ + ducere ‘to lead’."@en . [] a owl:Axiom ; - owl:annotatedProperty skos:altLabel ; - owl:annotatedSource ns1:EMMO_0f795e3e_c602_4577_9a43_d5a231aa1360 ; - owl:annotatedTarget "Elementary"@en ; - ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin elementārius (“elementary”), from elementum (“one of the four elements of antiquity; fundamentals”)."@en . + rdfs:isDefinedBy "https://www.iso.org/obp/ui/#iso:std:iso-astm:tr:52906:ed-1:v1:en:term:3.9"^^xsd:anyURI ; + owl:annotatedProperty rdfs:seeAlso ; + owl:annotatedSource ns1:EMMO_03441eb3_d1fd_4906_b953_b83312d7589e ; + owl:annotatedTarget """ISO/ASTM TR 52906:2022 Additive manufacturing +sintering: process of heating a powder metal compact to increase density and/or improve mechanical properties via solid state diffusion"""@en . [] a owl:Axiom ; owl:annotatedProperty skos:prefLabel ; - owl:annotatedSource ns1:EMMO_c5ddfdba_c074_4aa4_ad6b_1ac4942d300d ; - owl:annotatedTarget "CausalStructure"@en ; - ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin causa (“reason, sake, cause”), and from Latin struere (“arrange, assemble, build”)."@en . - -[] a swrl:Imp ; - swrl:body [ a swrl:AtomList ; - rdf:first [ a swrl:ClassAtom ; - swrl:argument1 ; - swrl:classPredicate ns1:EMMO_802d3e92_8770_4f98_a289_ccaaab7fdddf ] ; - rdf:rest () ] ; - swrl:head [ a swrl:AtomList ; - rdf:first [ a swrl:IndividualPropertyAtom ; - swrl:argument1 ; - swrl:argument2 ; - swrl:propertyPredicate ns1:EMMO_d893d373_b579_4867_841e_1c2b31a8d2c6 ] ; - rdf:rest () ] ; - ns1:EMMO_c7b62dd7_063a_4c2a_8504_42f7264ba83f "Enforcing reflexivity of overlapping."@en . - -[] a owl:Axiom ; - owl:annotatedProperty rdfs:subClassOf ; - owl:annotatedSource ns1:EMMO_802d3e92_8770_4f98_a289_ccaaab7fdddf ; - owl:annotatedTarget _:92 ; - ns1:EMMO_c7b62dd7_063a_4c2a_8504_42f7264ba83f "Every entity is made of quantum parts. This axiomatisation is the expression of the radical reductionistic approach of the EMMO."@en . + owl:annotatedSource ns1:EMMO_494b372c_cfdf_47d3_a4de_5e037c540de8 ; + owl:annotatedTarget "Device"@en ; + ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Old French \"deviser\", meaning: arrange, plan, contrive. Literally \"dispose in portions,\" from Vulgar Latin \"divisare\", frequentative of Latin dividere, meaning \"to divide\"."@en . [] a owl:Axiom ; - rdfs:seeAlso "https://en.wiktionary.org/wiki/Wiktionary"@en ; + rdfs:seeAlso "DIN 65099-7:1989-11"^^xsd:string ; owl:annotatedProperty ns1:EMMO_c7b62dd7_063a_4c2a_8504_42f7264ba83f ; - owl:annotatedSource ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 ; - owl:annotatedTarget "Definitions are usually taken from Wiktionary."@en . + owl:annotatedSource ns1:EMMO_dc0874e8_36e1_44df_947d_0d7c81167a09 ; + owl:annotatedTarget "(according to DIN 8200) Shot peening to generate residual compressive stresses in layers of the blasting material close to the surface in order to improve certain component properties, e.g. fatigue strength, corrosion resistance, wear resistance (from: DIN 8200:1982)"^^xsd:string . [] a owl:Axiom ; - owl:annotatedProperty ns1:EMMO_70fe84ff_99b6_4206_a9fc_9a8931836d84 ; - owl:annotatedSource ns1:EMMO_802d3e92_8770_4f98_a289_ccaaab7fdddf ; - owl:annotatedTarget "The disjoint union of the Item and Collection classes."@en ; - ns1:EMMO_c7b62dd7_063a_4c2a_8504_42f7264ba83f """The union implies that world entities can only be items or collections (standing for a collection of causally disconnected items). -Disjointness means that a collection cannot be an item and viceversa, representing the fact that a world entity cannot be causally self-connected and non-self connected at the same time."""@en . + owl:annotatedProperty ns1:EMMO_c6e77b51_681b_4d04_b20d_a08f2b977470 ; + owl:annotatedSource ns1:EMMO_d67ee67e_4fac_4676_82c9_aec361dba698 ; + owl:annotatedTarget ":isCauseOf owl:propertyDisjointWith :overlaps"@en ; + ns1:EMMO_c7b62dd7_063a_4c2a_8504_42f7264ba83f "Due to the transitivity characteristic of :overlaps subclasses, that makes it a composite property."^^xsd:string . [] a swrl:Imp ; swrl:body [ a swrl:AtomList ; @@ -20611,26 +20527,86 @@ Disjointness means that a collection cannot be an item and viceversa, representi ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin causa (“reason, sake, cause”), and Medieval Latin obiectum (“object”, literally “thrown against”)."@en . [] a owl:Axiom ; - owl:annotatedProperty ns1:EMMO_c6e77b51_681b_4d04_b20d_a08f2b977470 ; - owl:annotatedSource ns1:EMMO_d67ee67e_4fac_4676_82c9_aec361dba698 ; - owl:annotatedTarget ":isCauseOf owl:propertyDisjointWith :overlaps"@en ; - ns1:EMMO_c7b62dd7_063a_4c2a_8504_42f7264ba83f "Due to the transitivity characteristic of :overlaps subclasses, that makes it a composite property."^^xsd:string . + owl:annotatedProperty skos:altLabel ; + owl:annotatedSource ns1:EMMO_0f795e3e_c602_4577_9a43_d5a231aa1360 ; + owl:annotatedTarget "Elementary"@en ; + ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin elementārius (“elementary”), from elementum (“one of the four elements of antiquity; fundamentals”)."@en . + +[] a owl:Axiom ; + owl:annotatedProperty skos:prefLabel ; + owl:annotatedSource ns1:EMMO_c5ddfdba_c074_4aa4_ad6b_1ac4942d300d ; + owl:annotatedTarget "CausalStructure"@en ; + ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin causa (“reason, sake, cause”), and from Latin struere (“arrange, assemble, build”)."@en . + +[] a swrl:Imp ; + swrl:body [ a swrl:AtomList ; + rdf:first [ a swrl:ClassAtom ; + swrl:argument1 ; + swrl:classPredicate ns1:EMMO_802d3e92_8770_4f98_a289_ccaaab7fdddf ] ; + rdf:rest () ] ; + swrl:head [ a swrl:AtomList ; + rdf:first [ a swrl:IndividualPropertyAtom ; + swrl:argument1 ; + swrl:argument2 ; + swrl:propertyPredicate ns1:EMMO_01e5766d_dac3_4574_8a78_310de92a5c9d ] ; + rdf:rest () ] ; + ns1:EMMO_c7b62dd7_063a_4c2a_8504_42f7264ba83f "Enforcing the fact that an entity cannot cause itself."@en . + +[] a swrl:Imp ; + swrl:body [ a swrl:AtomList ; + rdf:first [ a swrl:ClassAtom ; + swrl:argument1 ; + swrl:classPredicate ns1:EMMO_802d3e92_8770_4f98_a289_ccaaab7fdddf ] ; + rdf:rest () ] ; + swrl:head [ a swrl:AtomList ; + rdf:first [ a swrl:IndividualPropertyAtom ; + swrl:argument1 ; + swrl:argument2 ; + swrl:propertyPredicate ns1:EMMO_d893d373_b579_4867_841e_1c2b31a8d2c6 ] ; + rdf:rest () ] ; + ns1:EMMO_c7b62dd7_063a_4c2a_8504_42f7264ba83f "Enforcing reflexivity of overlapping."@en . [] a swrl:Imp ; - rdfs:comment "Ensure that the hasNext relation expresses a strictly one-way causality arrow between two entities."^^rdfs:Literal ; swrl:body [ a swrl:AtomList ; rdf:first [ a swrl:IndividualPropertyAtom ; swrl:argument1 ; swrl:argument2 ; - swrl:propertyPredicate ns1:EMMO_499e24a5_5072_4c83_8625_fe3f96ae4a8d ] ; + swrl:propertyPredicate ns1:EMMO_6835537c_d294_4005_a770_ec9621f29ed1 ] ; rdf:rest () ] ; swrl:head [ a swrl:AtomList ; - rdf:first [ a swrl:IndividualPropertyAtom ; - swrl:argument1 ; - swrl:argument2 ; - swrl:propertyPredicate ns1:EMMO_01e5766d_dac3_4574_8a78_310de92a5c9d ] ; + rdf:first [ a swrl:SameIndividualAtom ; + swrl:argument1 ; + swrl:argument2 ] ; rdf:rest () ] . +[] a owl:Axiom ; + owl:annotatedProperty rdfs:subClassOf ; + owl:annotatedSource ns1:EMMO_802d3e92_8770_4f98_a289_ccaaab7fdddf ; + owl:annotatedTarget _:82 ; + ns1:EMMO_c7b62dd7_063a_4c2a_8504_42f7264ba83f "All EMMO individuals are part of the most comprehensive entity which is the universe."@en . + +[] a owl:Axiom ; + owl:annotatedProperty ns1:EMMO_31252f35_c767_4b97_a877_1235076c3e13 ; + owl:annotatedSource ns1:EMMO_802d3e92_8770_4f98_a289_ccaaab7fdddf ; + owl:annotatedTarget """The EMMO conceptualises the world using the primitive concepts of causality and parthood. Parthood is about the composition of world entities starting from other more fundamental entities. Causality is about the interactions between world entities. +The quantum is the smallest indivisible part of any world entity. Quantum individuals are the fundamental causal constituents of the universe, since it is implied that causality originates from quantum-to-quantum interactions. Quantums are no-dimensional, and their aggregation makes spacetime emerge from their causal structure. Causality between macro entities (i.e. entities made of more than one quantum) is explained as the sum of the causality relations between their quantum constituents. +The fundamental distinction between world entities is direct causality self-connectedness: a world entity can be self-connected xor not self-connected depending on the causality network of its fundamental components. +Void regions do not exist in the EMMO, or in other words there is no spacetime without entities, since space and time are measured quantities following a causality relation between entities (spacetime emerges as relational property not as a self-standing entity). +Entities are not placed in space or time: space and time are always relative between entities and are measured. In other words, space and time relations originates from causality interactions."""@en ; + ns1:EMMO_c7b62dd7_063a_4c2a_8504_42f7264ba83f "While EMMO mereocausality conceptualisation can be used on any possibile domain, so that a quantum can be a Lego brick or an furniture component, it can be better understood when a quantum is elucidated as the smallest measured time interval of existence of an elementary particle (e.g. quark, photon)."@en . + +[] a owl:Axiom ; + owl:annotatedProperty skos:prefLabel ; + owl:annotatedSource ns1:EMMO_d67ee67e_4fac_4676_82c9_aec361dba698 ; + owl:annotatedTarget "isCauseOf"@en ; + ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin causa (“reason, sake, cause”)."@en . + +[] a owl:Axiom ; + owl:annotatedProperty skos:prefLabel ; + owl:annotatedSource ns1:EMMO_6c03574f_6daa_4488_a970_ee355cca2530 ; + owl:annotatedTarget "CausalParticle"@en ; + ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin particula (“small part, particle”), diminutive of pars (“part, piece”)."@en . + [] a swrl:Imp ; swrl:body [ a swrl:AtomList ; rdf:first [ a swrl:IndividualPropertyAtom ; @@ -20657,6 +20633,13 @@ Disjointness means that a collection cannot be an item and viceversa, representi owl:annotatedTarget "CausalPath"@en ; ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Ancient Greek πάτος (pátos, “path”)."@en . +[] a owl:Axiom ; + owl:annotatedProperty skos:prefLabel ; + owl:annotatedSource ns1:EMMO_3f2e4ac2_8ef3_4a14_b826_60d37f15f8ee ; + owl:annotatedTarget "mereological"@en ; + ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 """Coined by Stanisław Leśniewski in 1927, from Ancient Greek μέρος (méros, “part”) +‎ -logy (“study, discussion, science”). +https://en.wiktionary.org/wiki/mereology"""@en . + [] a swrl:Imp ; swrl:body [ a swrl:AtomList ; rdf:first [ a swrl:IndividualPropertyAtom ; @@ -20673,26 +20656,22 @@ Disjointness means that a collection cannot be an item and viceversa, representi ns1:EMMO_c7b62dd7_063a_4c2a_8504_42f7264ba83f "Enforcing a strict one-way causality direction."@en . [] a owl:Axiom ; - owl:annotatedProperty ns1:EMMO_31252f35_c767_4b97_a877_1235076c3e13 ; - owl:annotatedSource ns1:EMMO_802d3e92_8770_4f98_a289_ccaaab7fdddf ; - owl:annotatedTarget """The EMMO conceptualises the world using the primitive concepts of causality and parthood. Parthood is about the composition of world entities starting from other more fundamental entities. Causality is about the interactions between world entities. -The quantum is the smallest indivisible part of any world entity. Quantum individuals are the fundamental causal constituents of the universe, since it is implied that causality originates from quantum-to-quantum interactions. Quantums are no-dimensional, and their aggregation makes spacetime emerge from their causal structure. Causality between macro entities (i.e. entities made of more than one quantum) is explained as the sum of the causality relations between their quantum constituents. -The fundamental distinction between world entities is direct causality self-connectedness: a world entity can be self-connected xor not self-connected depending on the causality network of its fundamental components. -Void regions do not exist in the EMMO, or in other words there is no spacetime without entities, since space and time are measured quantities following a causality relation between entities (spacetime emerges as relational property not as a self-standing entity). -Entities are not placed in space or time: space and time are always relative between entities and are measured. In other words, space and time relations originates from causality interactions."""@en ; - ns1:EMMO_c7b62dd7_063a_4c2a_8504_42f7264ba83f "While EMMO mereocausality conceptualisation can be used on any possibile domain, so that a quantum can be a Lego brick or an furniture component, it can be better understood when a quantum is elucidated as the smallest measured time interval of existence of an elementary particle (e.g. quark, photon)."@en . + owl:annotatedProperty skos:prefLabel ; + owl:annotatedSource ns1:EMMO_e7aac247_31d6_4b2e_9fd2_e842b1b7ccac ; + owl:annotatedTarget "CausalSystem"@en ; + ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin causa (“reason, sake, cause”), and Ancient Greek σύστημα (sústēma, “musical scale; organized body; whole made of several parts or members”), from σῠν- (sun-, prefix meaning ‘with, together’) + ἵστημι (hístēmi, “to stand”)."@en . [] a owl:Axiom ; - rdfs:isDefinedBy "https://www.ietf.org/rfc/rfc3986.txt"^^xsd:anyURI ; - owl:annotatedProperty ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 ; - owl:annotatedSource ns1:EMMO_6470bbfa_04a6_4360_9534_1aa18d68329b ; - owl:annotatedTarget "A Uniform Resource Identifier (URI) is a compact sequence of characters that identifies an abstract or physical resource."@en . + owl:annotatedProperty skos:altLabel ; + owl:annotatedSource ns1:EMMO_0f795e3e_c602_4577_9a43_d5a231aa1360 ; + owl:annotatedTarget "CausalChain"@en ; + ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Old French chaine, chaene (“chain”), from Latin catēna (“chain”)."@en . [] a owl:Axiom ; - rdfs:isDefinedBy "https://www.ietf.org/rfc/rfc3986.txt"^^xsd:anyURI ; + rdfs:isDefinedBy "https://datatracker.ietf.org/doc/rfc3987/"^^xsd:anyURI ; owl:annotatedProperty ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 ; - owl:annotatedSource ns1:EMMO_8a8f664b_dc59_4e00_ae00_81fdf1e1d12e ; - owl:annotatedTarget "The term \"Uniform Resource Locator\" (URL) refers to the subset of URIs that, in addition to identifying a resource, provide a means of locating the resource by describing its primary access mechanism (e.g., its network \"location\")."@en . + owl:annotatedSource ns1:EMMO_5c15f8c4_d2de_47a0_acdd_470b8dda979b ; + owl:annotatedTarget "An Internationalized Resource Identifier (IRI) is a compact sequence of characters that identifies an abstract or physical resource. It is similar to URI, but greatly extends the allowed character set from ASCII to the Universal Character Set."@en . [] a owl:Axiom ; owl:annotatedProperty skos:prefLabel ; @@ -20701,10 +20680,23 @@ Entities are not placed in space or time: space and time are always relative bet ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From soft +‎ -ware, by contrast with hardware (“the computer itself”). Coined by Paul Niquette in 1953."@en . [] a owl:Axiom ; - rdfs:isDefinedBy "https://www.iso.org/obp/ui/fr/#iso:std:iso-iec:2382:-1:ed-3:en"@en ; + rdfs:isDefinedBy "https://www.ietf.org/rfc/rfc3986.txt"^^xsd:anyURI ; owl:annotatedProperty ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 ; + owl:annotatedSource ns1:EMMO_8a8f664b_dc59_4e00_ae00_81fdf1e1d12e ; + owl:annotatedTarget "The term \"Uniform Resource Locator\" (URL) refers to the subset of URIs that, in addition to identifying a resource, provide a means of locating the resource by describing its primary access mechanism (e.g., its network \"location\")."@en . + +[] a owl:Axiom ; + rdfs:seeAlso "http://www.linfo.org/program.html"^^xsd:anyURI ; + owl:annotatedProperty ns1:EMMO_c7b62dd7_063a_4c2a_8504_42f7264ba83f ; owl:annotatedSource ns1:EMMO_8681074a_e225_4e38_b586_e85b0f43ce38 ; - owl:annotatedTarget "All or part of the programs, procedures, rules, and associated documentation of an information processing system."@en . + owl:annotatedTarget """Software is usually used as a generic term for programs. However, in its broadest sense it can refer to all information (i.e., both programs and data) in electronic form and can provide a distinction from hardware, which refers to computers or other electronic systems on which software can exist and be use. +Here we explicitly include in the definition also all the data (e.g. source code, script files) that takes part to the building of the executable, are necessary to the execution of a program or that document it for the users."""@en . + +[] a owl:Axiom ; + rdfs:isDefinedBy "https://www.ietf.org/rfc/rfc3986.txt"^^xsd:anyURI ; + owl:annotatedProperty ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 ; + owl:annotatedSource ns1:EMMO_6470bbfa_04a6_4360_9534_1aa18d68329b ; + owl:annotatedTarget "A Uniform Resource Identifier (URI) is a compact sequence of characters that identifies an abstract or physical resource."@en . [] a owl:Axiom ; rdfs:isDefinedBy "http://www.linfo.org/program.html"^^xsd:anyURI ; @@ -20712,37 +20704,18 @@ Entities are not placed in space or time: space and time are always relative bet owl:annotatedSource ns1:EMMO_65411b3d_c8d3_4111_86a9_a2ce0a64c647 ; owl:annotatedTarget "A program is a sequence of instructions understandable by a computer's central processing unit (CPU) that indicates which operations the computer should perform on a set of data."@en . -[] a owl:Axiom ; - dcterms:source "Scholz F, Nitschke L, Henrion G (1989) Naturwiss 76:71;"^^xsd:string ; - owl:annotatedProperty ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 ; - owl:annotatedSource :AbrasiveStrippingVoltammetry ; - owl:annotatedTarget "electrochemical method where traces of solid particles are abrasively transferred onto the surface of an electrode, followed by an electrochemical dissolution (anodic or cathodic dissolution) that is recorded as a current–voltage curve"@en . - [] a owl:Axiom ; owl:annotatedProperty ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 ; owl:annotatedSource ns1:EMMO_e94a9156_fb6c_4e16_88ee_829ac9933155 ; owl:annotatedTarget "A path is a string of characters used to uniquely identify a location in a directory structure according to a particular convention."@en ; ns1:EMMO_c84c6752_6d64_48cc_9500_e54a3c34898d "https://en.wikipedia.org/wiki/Path_(computing)#Universal_Naming_Convention"^^xsd:string . -[] a owl:Axiom ; - rdfs:isDefinedBy "https://datatracker.ietf.org/doc/rfc3987/"^^xsd:anyURI ; - owl:annotatedProperty ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 ; - owl:annotatedSource ns1:EMMO_5c15f8c4_d2de_47a0_acdd_470b8dda979b ; - owl:annotatedTarget "An Internationalized Resource Identifier (IRI) is a compact sequence of characters that identifies an abstract or physical resource. It is similar to URI, but greatly extends the allowed character set from ASCII to the Universal Character Set."@en . - [] a owl:Axiom ; rdfs:isDefinedBy "http://www.linfo.org/source_code.html"^^xsd:anyURI ; owl:annotatedProperty ns1:EMMO_c7b62dd7_063a_4c2a_8504_42f7264ba83f ; owl:annotatedSource ns1:EMMO_348d39f7_6a17_49d1_9860_9b33b69b51de ; owl:annotatedTarget "Source code (also referred to as source or code) is the version of software as it is originally written (i.e., typed into a computer) by a human in plain text (i.e., human readable alphanumeric characters)."@en . -[] a owl:Axiom ; - rdfs:seeAlso "http://www.linfo.org/program.html"^^xsd:anyURI ; - owl:annotatedProperty ns1:EMMO_c7b62dd7_063a_4c2a_8504_42f7264ba83f ; - owl:annotatedSource ns1:EMMO_8681074a_e225_4e38_b586_e85b0f43ce38 ; - owl:annotatedTarget """Software is usually used as a generic term for programs. However, in its broadest sense it can refer to all information (i.e., both programs and data) in electronic form and can provide a distinction from hardware, which refers to computers or other electronic systems on which software can exist and be use. -Here we explicitly include in the definition also all the data (e.g. source code, script files) that takes part to the building of the executable, are necessary to the execution of a program or that document it for the users."""@en . - [] a owl:Axiom ; rdfs:isDefinedBy "https://www.ietf.org/rfc/rfc3986.txt"^^xsd:anyURI ; owl:annotatedProperty ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 ; @@ -20750,23 +20723,17 @@ Here we explicitly include in the definition also all the data (e.g. source code owl:annotatedTarget "The term \"Uniform Resource Name\" (URN) has been used historically to refer to both URIs under the \"urn\" scheme [RFC2141], which are required to remain globally unique and persistent even when the resource ceases to exist or becomes unavailable, and to any other URI with the properties of a name."@en . [] a owl:Axiom ; - dcterms:source "J. M. Pingarrón et al., Terminology of electrochemical methods of analysis (IUPAC Recommendations 2019), Pure and Applied Chemistry, 4, 92, 2020, 641-694. https://doi.org/10.1515/pac-2018-0109"^^xsd:string ; + rdfs:isDefinedBy "https://www.iso.org/obp/ui/fr/#iso:std:iso-iec:2382:-1:ed-3:en"@en ; owl:annotatedProperty ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 ; - owl:annotatedSource :DifferentialStaircasePulseVoltammetry ; - owl:annotatedTarget "Differential Pulse Voltammetry in which small potential pulses are superimposed onto a staircase potential ramp."@en . + owl:annotatedSource ns1:EMMO_8681074a_e225_4e38_b586_e85b0f43ce38 ; + owl:annotatedTarget "All or part of the programs, procedures, rules, and associated documentation of an information processing system."@en . [] a owl:Axiom ; - rdfs:seeAlso "https://emmc.info/wp-content/uploads/2018/05/CWA_17284.pdf"^^xsd:anyURI ; + rdfs:seeAlso "https://emmc.info/wp-content/uploads/2018/05/CWA_17284.pdf"^^xsd:string ; owl:annotatedProperty rdfs:isDefinedBy ; - owl:annotatedSource ns1:EMMO_b29fd350_39aa_4af7_9459_3faa0544cba6 ; + owl:annotatedSource ns1:EMMO_e97af6ec_4371_4bbc_8936_34b76e33302f ; owl:annotatedTarget "CEN Workshop Agreement – CWA 17284 “Materials modelling – terminology, classification and metadata”"@en . -[] a owl:Axiom ; - dcterms:source "J. M. Pingarrón et al., Terminology of electrochemical methods of analysis (IUPAC Recommendations 2019), Pure and Applied Chemistry, 4, 92, 2020, 641-694. https://doi.org/10.1515/pac-2018-0109"^^xsd:string ; - owl:annotatedProperty rdfs:comment ; - owl:annotatedSource :PotentiometricStrippingAnalysis ; - owl:annotatedTarget "the stripping potentiogram shows staircase curves of potential as a function of time. Frequently, the first derivative is displayed (dE/dt=f(t)), as this produces peak-shaped signals. The time between transitions (peaks) is proportional to the concentration of analyte in the test solution"@en . - [] a owl:Axiom ; owl:annotatedProperty skos:prefLabel ; owl:annotatedSource ns1:EMMO_eff42cb3_208e_4768_9a39_f8b6b3c3d7a2 ; @@ -20774,17 +20741,11 @@ Here we explicitly include in the definition also all the data (e.g. source code ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin con- +‎ putō (“I reckon”)."@en . [] a owl:Axiom ; - rdfs:seeAlso "https://emmc.info/wp-content/uploads/2018/05/CWA_17284.pdf"^^xsd:string ; + rdfs:seeAlso "https://emmc.info/wp-content/uploads/2018/05/CWA_17284.pdf"^^xsd:anyURI ; owl:annotatedProperty rdfs:isDefinedBy ; - owl:annotatedSource ns1:EMMO_e97af6ec_4371_4bbc_8936_34b76e33302f ; + owl:annotatedSource ns1:EMMO_b29fd350_39aa_4af7_9459_3faa0544cba6 ; owl:annotatedTarget "CEN Workshop Agreement – CWA 17284 “Materials modelling – terminology, classification and metadata”"@en . -[] a owl:Axiom ; - dcterms:source "J. M. Pingarrón et al., Terminology of electrochemical methods of analysis (IUPAC Recommendations 2019), Pure and Applied Chemistry, 4, 92, 2020, 641-694. https://doi.org/10.1515/pac-2018-0109"^^xsd:string ; - owl:annotatedProperty rdfs:comment ; - owl:annotatedSource :PotentiometricStrippingAnalysis ; - owl:annotatedTarget "the accumulation is similar to that used in stripping voltammetry"@en . - [] a owl:Axiom ; owl:annotatedProperty ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 ; owl:annotatedSource ns1:EMMO_1eed0732_e3f1_4b2c_a9c4_b4e75eeb5895 ; @@ -20797,12 +20758,18 @@ Here we explicitly include in the definition also all the data (e.g. source code owl:annotatedTarget "Variable"@en ; ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "Fom Latin variabilis (\"changeable\")."@en . -[] owl:qualifiedCardinality "3"^^xsd:nonNegativeInteger . +[] a owl:Axiom ; + dcterms:source "International Electrotechnical Commission (IEC), IEC 60050 - International Electrotechnical Vocabulary, retrieved from: https://www.electropedia.org"^^xsd:string ; + owl:annotatedProperty ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 ; + owl:annotatedSource :Electrogravimetry ; + owl:annotatedTarget "method of electroanalytical chemistry used to separate by electrolyse ions of a substance and to derive the amount of this substance from the increase in mass of an electrode."@en . [] owl:qualifiedCardinality "4"^^xsd:nonNegativeInteger . [] owl:qualifiedCardinality "1"^^xsd:nonNegativeInteger . +[] owl:qualifiedCardinality "3"^^xsd:nonNegativeInteger . + [] a owl:Axiom ; owl:annotatedProperty skos:prefLabel ; owl:annotatedSource ns1:EMMO_057e7d57_aff0_49de_911a_8861d85cef40 ; @@ -20815,12 +20782,6 @@ Here we explicitly include in the definition also all the data (e.g. source code owl:annotatedTarget "Language"@en ; ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin lingua (“tongue, speech, language”), from Old Latin dingua (“tongue”)."@en . -[] a owl:Axiom ; - owl:annotatedProperty skos:altLabel ; - owl:annotatedSource ns1:EMMO_1e877c70_3b01_45a8_a8f6_8ce4f6a24660 ; - owl:annotatedTarget "Dedomena"@en ; - ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Greek, nominative plural form of δεδομένο (dedoméno) (data, information)"@en . - [] a owl:Axiom ; owl:annotatedProperty ns1:EMMO_c7b62dd7_063a_4c2a_8504_42f7264ba83f ; owl:annotatedSource ns1:EMMO_3e7add3d_e6ed_489a_a796_8e31fef9b490 ; @@ -20834,34 +20795,34 @@ We call "interpreting" the act of providing semantic meaning to data, which is c owl:annotatedTarget "Data"@en ; ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin data, nominative plural of datum (“that is given”), neuter past participle of dō (“I give”)."@en . +[] a owl:Axiom ; + owl:annotatedProperty skos:altLabel ; + owl:annotatedSource ns1:EMMO_1e877c70_3b01_45a8_a8f6_8ce4f6a24660 ; + owl:annotatedTarget "Dedomena"@en ; + ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Greek, nominative plural form of δεδομένο (dedoméno) (data, information)"@en . + [] a owl:Axiom ; owl:annotatedProperty skos:prefLabel ; owl:annotatedSource ns1:EMMO_49267eba_5548_4163_8f36_518d65b583f9 ; owl:annotatedTarget "Perspective"@en ; ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From medieval Latin perspectiva ‘(science of) optics’, from perspect- ‘looked at closely’, from the verb perspicere, from per- ‘through’ + specere ‘to look’."@en . -[] a owl:Axiom ; - owl:annotatedProperty ns1:EMMO_31252f35_c767_4b97_a877_1235076c3e13 ; - owl:annotatedSource ns1:EMMO_ee0466e4_780d_4236_8281_ace7ad3fc5d2 ; - owl:annotatedTarget "A tessellation (or tiling) is the covering of a surface, often a plane, using one or more geometric shapes, called tiles, with no overlaps and no gaps."@en ; - ns1:EMMO_c84c6752_6d64_48cc_9500_e54a3c34898d "https://en.wikipedia.org/wiki/Tessellation"^^xsd:anyURI . - [] a swrl:Imp ; swrl:body [ a swrl:AtomList ; rdf:first [ a swrl:IndividualPropertyAtom ; swrl:argument1 ; swrl:argument2 ; - swrl:propertyPredicate ns1:EMMO_b2282816_b7a3_44c6_b2cb_3feff1ceb7fe ] ; + swrl:propertyPredicate ns1:EMMO_65a2c5b8_e4d8_4a51_b2f8_e55effc0547d ] ; rdf:rest [ a swrl:AtomList ; rdf:first [ a swrl:ClassAtom ; swrl:argument1 ; - swrl:classPredicate ns1:EMMO_36c79456_e29c_400d_8bd3_0eedddb82652 ] ; + swrl:classPredicate ns1:EMMO_92829beb_6ed4_4c88_bbd5_3bc7403e2895 ] ; rdf:rest () ] ] ; swrl:head [ a swrl:AtomList ; rdf:first [ a swrl:IndividualPropertyAtom ; swrl:argument1 ; swrl:argument2 ; - swrl:propertyPredicate ns1:EMMO_f68030be_94b8_4c61_a161_886468558054 ] ; + swrl:propertyPredicate ns1:EMMO_2a33ee61_8235_4da4_b9a1_ca62cb87a016 ] ; rdf:rest () ] . [] a owl:Axiom ; @@ -20870,29 +20831,41 @@ We call "interpreting" the act of providing semantic meaning to data, which is c owl:annotatedTarget "Existent"@en ; ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "ex-sistere (latin): to stay (to persist through time) outside others of the same type (to be distinct from the rest)."@en . +[] a owl:Axiom ; + owl:annotatedProperty ns1:EMMO_31252f35_c767_4b97_a877_1235076c3e13 ; + owl:annotatedSource ns1:EMMO_ee0466e4_780d_4236_8281_ace7ad3fc5d2 ; + owl:annotatedTarget "A tessellation (or tiling) is the covering of a surface, often a plane, using one or more geometric shapes, called tiles, with no overlaps and no gaps."@en ; + ns1:EMMO_c84c6752_6d64_48cc_9500_e54a3c34898d "https://en.wikipedia.org/wiki/Tessellation"^^xsd:anyURI . + [] a swrl:Imp ; swrl:body [ a swrl:AtomList ; rdf:first [ a swrl:IndividualPropertyAtom ; swrl:argument1 ; swrl:argument2 ; - swrl:propertyPredicate ns1:EMMO_65a2c5b8_e4d8_4a51_b2f8_e55effc0547d ] ; + swrl:propertyPredicate ns1:EMMO_b2282816_b7a3_44c6_b2cb_3feff1ceb7fe ] ; rdf:rest [ a swrl:AtomList ; rdf:first [ a swrl:ClassAtom ; swrl:argument1 ; - swrl:classPredicate ns1:EMMO_92829beb_6ed4_4c88_bbd5_3bc7403e2895 ] ; + swrl:classPredicate ns1:EMMO_36c79456_e29c_400d_8bd3_0eedddb82652 ] ; rdf:rest () ] ] ; swrl:head [ a swrl:AtomList ; rdf:first [ a swrl:IndividualPropertyAtom ; swrl:argument1 ; swrl:argument2 ; - swrl:propertyPredicate ns1:EMMO_2a33ee61_8235_4da4_b9a1_ca62cb87a016 ] ; + swrl:propertyPredicate ns1:EMMO_f68030be_94b8_4c61_a161_886468558054 ] ; rdf:rest () ] . [] a owl:Axiom ; owl:annotatedProperty skos:prefLabel ; - owl:annotatedSource ns1:EMMO_8c537c06_8e1d_4a3b_a251_1c89bb2c4790 ; - owl:annotatedTarget "ResemblanceIcon"@en ; - ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Old French sambler, sembler, from Late Latin similāre, present active infinitive of similō, from Latin similis, from Proto-Italic *semalis, from Proto-Indo-European *sem- (“together, one”)."@en . + owl:annotatedSource ns1:EMMO_d7788d1a_020d_4c78_85a1_13563fcec168 ; + owl:annotatedTarget "Icon"@en ; + ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Ancient Greek εἰκών (eikṓn, “likeness, image, portrait”)."@en . + +[] a owl:Axiom ; + dcterms:source "J. M. Pingarrón et al., Terminology of electrochemical methods of analysis (IUPAC Recommendations 2019), Pure and Applied Chemistry, 4, 92, 2020, 641-694. https://doi.org/10.1515/pac-2018-0109"^^xsd:string ; + owl:annotatedProperty rdfs:comment ; + owl:annotatedSource :PotentiometricStrippingAnalysis ; + owl:annotatedTarget "historically for the analysis of metal ions, mercury ions were added to the test solution to form a mercury amalgam when reduced. Alternatively, an HMDE or MFE was used and the oxidizing agent added after amalgam formation. However, the toxicity of mercury and its compounds have all but precluded the present-day use of mercury"@en . [] a owl:Axiom ; owl:annotatedProperty skos:prefLabel ; @@ -20902,9 +20875,15 @@ We call "interpreting" the act of providing semantic meaning to data, which is c [] a owl:Axiom ; owl:annotatedProperty skos:prefLabel ; - owl:annotatedSource ns1:EMMO_0cd58641_824c_4851_907f_f4c3be76630c ; - owl:annotatedTarget "Index"@en ; - ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin index (“a discoverer, informer, spy; of things, an indicator, the forefinger, a title, superscription”), from indicō (“point out, show”)."@en . + owl:annotatedSource ns1:EMMO_b7bcff25_ffc3_474e_9ab5_01b1664bd4ba ; + owl:annotatedTarget "Property"@en ; + ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin proprietas (“a peculiarity, one's peculiar nature or quality, right or fact of possession, property”), from proprius (“special, particular, one's own”)."@en . + +[] a owl:Axiom ; + owl:annotatedProperty skos:prefLabel ; + owl:annotatedSource ns1:EMMO_19608340_178c_4bfd_bd4d_0d3b935c6fec ; + owl:annotatedTarget "Cogniser"@en ; + ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin cognitio (“knowledge, perception, a judicial examination, trial”), from cognitus, past participle of cognoscere (“to know”), from co- (“together”) + *gnoscere, older form of noscere (“to know”"@en . [] a owl:Axiom ; owl:annotatedProperty skos:altLabel ; @@ -20912,6 +20891,12 @@ We call "interpreting" the act of providing semantic meaning to data, which is c owl:annotatedTarget "Simulacrum"@en ; ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin simulacrum (\"likeness, semblance\")"@en . +[] a owl:Axiom ; + owl:annotatedProperty skos:prefLabel ; + owl:annotatedSource ns1:EMMO_4f2d1fcc_e20c_4479_9ad7_7a0480dd3e44 ; + owl:annotatedTarget "AnalogicalIcon"@en ; + ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Ancient Greek ἀναλογία (analogía), from ἀνά (aná) + λόγος (lógos, “speech, reckoning”)."@en . + [] a owl:Axiom ; owl:annotatedProperty skos:prefLabel ; owl:annotatedSource ns1:EMMO_3b19eab4_79be_4b02_bdaf_ecf1f0067a68 ; @@ -20928,11 +20913,17 @@ We call "interpreting" the act of providing semantic meaning to data, which is c (c) the metaphor, which represents the representative character of a sign by representing a parallelism in something else [Wikipedia]"""@en . +[] a owl:Axiom ; + dcterms:source "J. M. Pingarrón et al., Terminology of electrochemical methods of analysis (IUPAC Recommendations 2019), Pure and Applied Chemistry, 4, 92, 2020, 641-694. https://doi.org/10.1515/pac-2018-0109"^^xsd:string ; + owl:annotatedProperty rdfs:comment ; + owl:annotatedSource :PotentiometricStrippingAnalysis ; + owl:annotatedTarget "the accumulation is similar to that used in stripping voltammetry"@en . + [] a owl:Axiom ; owl:annotatedProperty skos:prefLabel ; - owl:annotatedSource ns1:EMMO_b7bcff25_ffc3_474e_9ab5_01b1664bd4ba ; - owl:annotatedTarget "Property"@en ; - ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin proprietas (“a peculiarity, one's peculiar nature or quality, right or fact of possession, property”), from proprius (“special, particular, one's own”)."@en . + owl:annotatedSource ns1:EMMO_0cd58641_824c_4851_907f_f4c3be76630c ; + owl:annotatedTarget "Index"@en ; + ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin index (“a discoverer, informer, spy; of things, an indicator, the forefinger, a title, superscription”), from indicō (“point out, show”)."@en . [] a owl:Axiom ; owl:annotatedProperty skos:altLabel ; @@ -20940,47 +20931,17 @@ We call "interpreting" the act of providing semantic meaning to data, which is c owl:annotatedTarget "Model"@en ; ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin modus (“measure”)."@en . -[] a owl:Axiom ; - dcterms:source "International Electrotechnical Commission (IEC), IEC 60050 - International Electrotechnical Vocabulary, retrieved from: https://www.electropedia.org"^^xsd:string ; - owl:annotatedProperty ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 ; - owl:annotatedSource :Electrogravimetry ; - owl:annotatedTarget "method of electroanalytical chemistry used to separate by electrolyse ions of a substance and to derive the amount of this substance from the increase in mass of an electrode."@en . - -[] a owl:Axiom ; - owl:annotatedProperty skos:prefLabel ; - owl:annotatedSource ns1:EMMO_4f2d1fcc_e20c_4479_9ad7_7a0480dd3e44 ; - owl:annotatedTarget "AnalogicalIcon"@en ; - ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Ancient Greek ἀναλογία (analogía), from ἀνά (aná) + λόγος (lógos, “speech, reckoning”)."@en . - -[] a owl:Axiom ; - dcterms:source "J. M. Pingarrón et al., Terminology of electrochemical methods of analysis (IUPAC Recommendations 2019), Pure and Applied Chemistry, 4, 92, 2020, 641-694. https://doi.org/10.1515/pac-2018-0109."^^xsd:string ; - owl:annotatedProperty ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 ; - owl:annotatedSource :CyclicChronopotentiometry ; - owl:annotatedTarget "chronopotentiometry where the change in applied current undergoes a cyclic current reversal"@en . - -[] a owl:Axiom ; - owl:annotatedProperty skos:prefLabel ; - owl:annotatedSource ns1:EMMO_1c0b22a2_be82_4fa8_9e2b_a569a625d442 ; - owl:annotatedTarget "Estimation"@en ; - ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin aestimatus (“to value, rate, esteem”)."@en . - [] a owl:Axiom ; owl:annotatedProperty skos:prefLabel ; - owl:annotatedSource ns1:EMMO_19608340_178c_4bfd_bd4d_0d3b935c6fec ; - owl:annotatedTarget "Cogniser"@en ; - ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin cognitio (“knowledge, perception, a judicial examination, trial”), from cognitus, past participle of cognoscere (“to know”), from co- (“together”) + *gnoscere, older form of noscere (“to know”"@en . + owl:annotatedSource ns1:EMMO_8c537c06_8e1d_4a3b_a251_1c89bb2c4790 ; + owl:annotatedTarget "ResemblanceIcon"@en ; + ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Old French sambler, sembler, from Late Latin similāre, present active infinitive of similō, from Latin similis, from Proto-Italic *semalis, from Proto-Indo-European *sem- (“together, one”)."@en . [] a owl:Axiom ; owl:annotatedProperty skos:prefLabel ; - owl:annotatedSource ns1:EMMO_d7788d1a_020d_4c78_85a1_13563fcec168 ; - owl:annotatedTarget "Icon"@en ; - ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Ancient Greek εἰκών (eikṓn, “likeness, image, portrait”)."@en . - -[] a owl:Axiom ; - dcterms:source "J. M. Pingarrón et al., Terminology of electrochemical methods of analysis (IUPAC Recommendations 2019), Pure and Applied Chemistry, 4, 92, 2020, 641-694. https://doi.org/10.1515/pac-2018-0109."^^xsd:string ; - owl:annotatedProperty ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 ; - owl:annotatedSource :LinearChronopotentiometry ; - owl:annotatedTarget "chronopotentiometry where the applied current is changed linearly"@en . + owl:annotatedSource ns1:EMMO_1c0b22a2_be82_4fa8_9e2b_a569a625d442 ; + owl:annotatedTarget "Estimation"@en ; + ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin aestimatus (“to value, rate, esteem”)."@en . [] a owl:Axiom ; rdfs:isDefinedBy "https://www.bipm.org/documents/20126/2071204/JCGM_200_2012.pdf"^^xsd:string ; @@ -20989,10 +20950,16 @@ We call "interpreting" the act of providing semantic meaning to data, which is c owl:annotatedTarget "Metrology is the science of measurement and its application and includes all theoretical and practical aspects of measurement, whatever the measurement uncertainty and field of application (VIM3 2.2)"@en . [] a owl:Axiom ; - dcterms:source "J. M. Pingarrón et al., Terminology of electrochemical methods of analysis (IUPAC Recommendations 2019), Pure and Applied Chemistry, 4, 92, 2020, 641-694. https://doi.org/10.1515/pac-2018-0109"^^xsd:string ; - owl:annotatedProperty rdfs:comment ; - owl:annotatedSource :PotentiometricStrippingAnalysis ; - owl:annotatedTarget "historically for the analysis of metal ions, mercury ions were added to the test solution to form a mercury amalgam when reduced. Alternatively, an HMDE or MFE was used and the oxidizing agent added after amalgam formation. However, the toxicity of mercury and its compounds have all but precluded the present-day use of mercury"@en . + dcterms:source "J. M. Pingarrón et al., Terminology of electrochemical methods of analysis (IUPAC Recommendations 2019), Pure and Applied Chemistry, 4, 92, 2020, 641-694. https://doi.org/10.1515/pac-2018-0109."^^xsd:string ; + owl:annotatedProperty ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 ; + owl:annotatedSource :LinearChronopotentiometry ; + owl:annotatedTarget "chronopotentiometry where the applied current is changed linearly"@en . + +[] a owl:Axiom ; + owl:annotatedProperty ns1:EMMO_bb49844b_45d7_4f0d_8cae_8e552cbc20d6 ; + owl:annotatedSource ns1:EMMO_0650c031_42b6_4f0a_b62d_d88f071da6bf ; + owl:annotatedTarget "measurand"@en ; + ns1:EMMO_c7b62dd7_063a_4c2a_8504_42f7264ba83f "VIM defines measurand as a quantity intended to be measured. This is redundant in EMMO and correspond to Quantity."@en . [] a owl:Axiom ; rdfs:isDefinedBy "https://www.iso.org/standard/45324.html"^^xsd:anyURI ; @@ -21001,16 +20968,16 @@ We call "interpreting" the act of providing semantic meaning to data, which is c owl:annotatedTarget "A measurement is the process of experimentally obtaining one or more measurement results that can reasonably be attributed to a quantity."@en . [] a owl:Axiom ; - owl:annotatedProperty ns1:EMMO_bb49844b_45d7_4f0d_8cae_8e552cbc20d6 ; - owl:annotatedSource ns1:EMMO_0650c031_42b6_4f0a_b62d_d88f071da6bf ; - owl:annotatedTarget "measurand"@en ; - ns1:EMMO_c7b62dd7_063a_4c2a_8504_42f7264ba83f "VIM defines measurand as a quantity intended to be measured. This is redundant in EMMO and correspond to Quantity."@en . + owl:annotatedProperty skos:prefLabel ; + owl:annotatedSource ns1:EMMO_bafc17b5_9be4_4823_8bbe_ab4e90b6738c ; + owl:annotatedTarget "IntentionalProcess"@en ; + ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin intentionem, derived from intendere (\"stretching out\")"@en . [] a owl:Axiom ; - rdfs:seeAlso "https://en.wiktionary.org/wiki/procedure"^^xsd:anyURI ; - owl:annotatedProperty ns1:EMMO_31252f35_c767_4b97_a877_1235076c3e13 ; + owl:annotatedProperty skos:prefLabel ; owl:annotatedSource ns1:EMMO_472a0ca2_58bf_4618_b561_6fe68bd9fd49 ; - owl:annotatedTarget "The set of established forms or methods of an organized body for accomplishing a certain task or tasks (Wiktionary)."@en . + owl:annotatedTarget "Procedure"@en ; + ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin pro-cedere (“to go forward, to proceed”)."@en . [] a owl:Axiom ; rdfs:isDefinedBy "https://www.iso.org/obp/ui/#iso:std:iso:55000:ed-1:v2:en:term:3.1.13"^^xsd:anyURI ; @@ -21020,25 +20987,22 @@ We call "interpreting" the act of providing semantic meaning to data, which is c organization: person or group of people that has its own functions with responsibilities, authorities and relationships to achieve its objectives"""@en . [] a owl:Axiom ; - owl:annotatedProperty skos:prefLabel ; - owl:annotatedSource ns1:EMMO_bafc17b5_9be4_4823_8bbe_ab4e90b6738c ; - owl:annotatedTarget "IntentionalProcess"@en ; - ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin intentionem, derived from intendere (\"stretching out\")"@en . + rdfs:seeAlso "https://en.wiktionary.org/wiki/procedure"^^xsd:anyURI ; + owl:annotatedProperty ns1:EMMO_31252f35_c767_4b97_a877_1235076c3e13 ; + owl:annotatedSource ns1:EMMO_472a0ca2_58bf_4618_b561_6fe68bd9fd49 ; + owl:annotatedTarget "The set of established forms or methods of an organized body for accomplishing a certain task or tasks (Wiktionary)."@en . [] a owl:Axiom ; owl:annotatedProperty skos:prefLabel ; - owl:annotatedSource ns1:EMMO_472a0ca2_58bf_4618_b561_6fe68bd9fd49 ; - owl:annotatedTarget "Procedure"@en ; - ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin pro-cedere (“to go forward, to proceed”)."@en . - -[] a owl:AllDisjointClasses ; - owl:members ( :CalibrationProcess :CharacterisationDataValidation :CharacterisationMeasurementProcess :DataAnalysis :DataPostProcessing :DataPreparation :SampleInspection :SamplePreparation :SamplingProcess ) . + owl:annotatedSource ns1:EMMO_1efe8b96_e006_4a33_bc9a_421406cbb9f0 ; + owl:annotatedTarget "Whole"@en ; + ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Middle English hole (“healthy, unhurt, whole”)."@en . [] a owl:Axiom ; owl:annotatedProperty skos:altLabel ; - owl:annotatedSource ns1:EMMO_57c75ca1_bf8a_42bc_85d9_58cfe38c7df2 ; - owl:annotatedTarget "Lifetime"@en ; - ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Middle English liftime, equivalent to life +‎ time."@en . + owl:annotatedSource ns1:EMMO_4f226cf3_6d02_4d35_8566_a9e641bc6ff3 ; + owl:annotatedTarget "Part"@en ; + ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin partire, partiri ‘divide, share’."@en . [] a owl:Axiom ; owl:annotatedProperty skos:prefLabel ; @@ -21047,10 +21011,10 @@ organization: person or group of people that has its own functions with responsi ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "Holism (from Greek ὅλος holos \"all, whole, entire\")."@en . [] a owl:Axiom ; - owl:annotatedProperty skos:prefLabel ; + owl:annotatedProperty skos:altLabel ; owl:annotatedSource ns1:EMMO_57c75ca1_bf8a_42bc_85d9_58cfe38c7df2 ; - owl:annotatedTarget "Fundamental"@en ; - ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin fundamentum (“foundation”), from fundō (“to lay the foundation (of something), to found”), from fundus (“bottom”)."@en . + owl:annotatedTarget "Lifetime"@en ; + ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Middle English liftime, equivalent to life +‎ time."@en . [] a owl:Axiom ; owl:annotatedProperty skos:prefLabel ; @@ -21064,23 +21028,11 @@ organization: person or group of people that has its own functions with responsi owl:annotatedTarget "Wholistic"@en ; ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From the word 'holistic' with the 'w-' prefix, due to the affinity with the existing word 'whole', that share the same meaning of 'holos'."@en . -[] a owl:Axiom ; - owl:annotatedProperty skos:altLabel ; - owl:annotatedSource ns1:EMMO_4f226cf3_6d02_4d35_8566_a9e641bc6ff3 ; - owl:annotatedTarget "Part"@en ; - ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin partire, partiri ‘divide, share’."@en . - -[] a owl:Axiom ; - dcterms:source "J. M. Pingarrón et al., Terminology of electrochemical methods of analysis (IUPAC Recommendations 2019), Pure and Applied Chemistry, 4, 92, 2020, 641-694. https://doi.org/10.1515/pac-2018-0109"^^xsd:string ; - owl:annotatedProperty ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 ; - owl:annotatedSource :PotentiometricStrippingAnalysis ; - owl:annotatedTarget "two-step electrochemical measurement in which 1) material is accumulated at an electrode and 2) the material is removed by chemical reaction or electrochemically at constant current with measurement of electrode potential"@en . - [] a owl:Axiom ; owl:annotatedProperty skos:prefLabel ; - owl:annotatedSource ns1:EMMO_1efe8b96_e006_4a33_bc9a_421406cbb9f0 ; - owl:annotatedTarget "Whole"@en ; - ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Middle English hole (“healthy, unhurt, whole”)."@en . + owl:annotatedSource ns1:EMMO_57c75ca1_bf8a_42bc_85d9_58cfe38c7df2 ; + owl:annotatedTarget "Fundamental"@en ; + ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin fundamentum (“foundation”), from fundō (“to lay the foundation (of something), to found”), from fundus (“bottom”)."@en . [] owl:qualifiedCardinality "1"^^xsd:nonNegativeInteger . @@ -21094,52 +21046,47 @@ organization: person or group of people that has its own functions with responsi [] owl:qualifiedCardinality "1"^^xsd:nonNegativeInteger . +[] a owl:AllDisjointClasses ; + owl:members ( :CompressionTesting :CreepTesting :DynamicMechanicalAnalysis :FatigueTesting :FibDic :HardnessTesting :Nanoindentation :ShearOrTorsionTesting :TensileTesting :WearTesting ) . + +[] a owl:Axiom ; + dcterms:source "J. M. Pingarrón et al., Terminology of electrochemical methods of analysis (IUPAC Recommendations 2019), Pure and Applied Chemistry, 4, 92, 2020, 641-694. https://doi.org/10.1515/pac-2018-0109."^^xsd:string ; + owl:annotatedProperty ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 ; + owl:annotatedSource :StepChronopotentiometry ; + owl:annotatedTarget "chronopotentiometry where the applied current is changed in steps"@en . + [] a owl:Axiom ; dcterms:source "J. M. Pingarrón et al., Terminology of electrochemical methods of analysis (IUPAC Recommendations 2019), Pure and Applied Chemistry, 4, 92, 2020, 641-694. https://doi.org/10.1515/pac-2018-0109"^^xsd:string ; owl:annotatedProperty ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 ; - owl:annotatedSource :DifferentialLinearPulseVoltammetry ; - owl:annotatedTarget "Differential Pulse Voltammetry in which small potential pulses are superimposed onto a linearly varying potential."@en . + owl:annotatedSource :PotentiometricStrippingAnalysis ; + owl:annotatedTarget "two-step electrochemical measurement in which 1) material is accumulated at an electrode and 2) the material is removed by chemical reaction or electrochemically at constant current with measurement of electrode potential"@en . [] a owl:Axiom ; dcterms:source "J. M. Pingarrón et al., Terminology of electrochemical methods of analysis (IUPAC Recommendations 2019), Pure and Applied Chemistry, 4, 92, 2020, 641-694. https://doi.org/10.1515/pac-2018-0109"^^xsd:string ; owl:annotatedProperty rdfs:comment ; owl:annotatedSource :PotentiometricStrippingAnalysis ; - owl:annotatedTarget "the time between changes in potential in step 2 is related to the concentration of analyte in the solution"@en . - -[] a owl:AllDisjointClasses ; - owl:members ( :CompressionTesting :CreepTesting :DynamicMechanicalAnalysis :FatigueTesting :FibDic :HardnessTesting :Nanoindentation :ShearOrTorsionTesting :TensileTesting :WearTesting ) . + owl:annotatedTarget "the stripping potentiogram shows staircase curves of potential as a function of time. Frequently, the first derivative is displayed (dE/dt=f(t)), as this produces peak-shaped signals. The time between transitions (peaks) is proportional to the concentration of analyte in the test solution"@en . [] a owl:Axiom ; - owl:annotatedProperty skos:prefLabel ; - owl:annotatedSource ns1:EMMO_eb3a768e_d53e_4be9_a23b_0714833c36de ; - owl:annotatedTarget "Item"@en ; - ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin item, \"likewise, just so, moreover\"."@en . + dcterms:source "J. M. Pingarrón et al., Terminology of electrochemical methods of analysis (IUPAC Recommendations 2019), Pure and Applied Chemistry, 4, 92, 2020, 641-694. https://doi.org/10.1515/pac-2018-0109"^^xsd:string ; + owl:annotatedProperty ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 ; + owl:annotatedSource :DifferentialStaircasePulseVoltammetry ; + owl:annotatedTarget "Differential Pulse Voltammetry in which small potential pulses are superimposed onto a staircase potential ramp."@en . -[] a owl:Axiom ; - owl:annotatedProperty skos:prefLabel ; - owl:annotatedSource ns1:EMMO_3733bd38_ca2b_4264_a92a_3075a1715598 ; - owl:annotatedTarget "isPredecessorOf"@en ; - ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin prae (\"beforehand\") and decedere (\"depart\")."@en . +[] a owl:AllDisjointClasses ; + owl:members ( :CalibrationProcess :CharacterisationDataValidation :CharacterisationMeasurementProcess :DataAnalysis :DataPostProcessing :DataPreparation :SampleInspection :SamplePreparation :SamplingProcess ) . -[] a swrl:Imp ; - swrl:body [ a swrl:AtomList ; - rdf:first [ a swrl:ClassAtom ; - swrl:argument1 ; - swrl:classPredicate ns1:EMMO_802d3e92_8770_4f98_a289_ccaaab7fdddf ] ; - rdf:rest () ] ; - swrl:head [ a swrl:AtomList ; - rdf:first [ a swrl:IndividualPropertyAtom ; - swrl:argument1 ; - swrl:argument2 ; - swrl:propertyPredicate ns1:EMMO_17e27c22_37e1_468c_9dd7_95e137f73e7f ] ; - rdf:rest () ] ; - ns1:EMMO_c7b62dd7_063a_4c2a_8504_42f7264ba83f "Enforcing parthood reflexivity."@en . +[] a owl:Axiom ; + dcterms:source "J. M. Pingarrón et al., Terminology of electrochemical methods of analysis (IUPAC Recommendations 2019), Pure and Applied Chemistry, 4, 92, 2020, 641-694. https://doi.org/10.1515/pac-2018-0109."^^xsd:string ; + owl:annotatedProperty ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 ; + owl:annotatedSource :CyclicChronopotentiometry ; + owl:annotatedTarget "chronopotentiometry where the change in applied current undergoes a cyclic current reversal"@en . [] a owl:Axiom ; - owl:annotatedProperty skos:prefLabel ; - owl:annotatedSource ns1:EMMO_0bb3b434_73aa_428f_b4e8_2a2468648e19 ; - owl:annotatedTarget "Crystal"@en ; - ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Ancient Greek κρύσταλλος (krústallos, “clear ice”), from κρύος (krúos, “frost”)."@en . + owl:annotatedProperty rdfs:subClassOf ; + owl:annotatedSource ns1:EMMO_802d3e92_8770_4f98_a289_ccaaab7fdddf ; + owl:annotatedTarget _:70 ; + ns1:EMMO_c7b62dd7_063a_4c2a_8504_42f7264ba83f "Every entity is made of quantum parts. This axiomatisation is the expression of the radical reductionistic approach of the EMMO."@en . [] a owl:Axiom ; rdfs:isDefinedBy "https://dictionary.iucr.org/Crystal"^^xsd:anyURI ; @@ -21152,44 +21099,46 @@ A solid is a crystal if it has essentially a sharp diffraction pattern. The word H=∑ni=1hia∗i (n≥3)"""^^xsd:string . -[] owl:qualifiedCardinality "1"^^xsd:nonNegativeInteger . +[] a owl:Axiom ; + owl:annotatedProperty skos:prefLabel ; + owl:annotatedSource ns1:EMMO_0bb3b434_73aa_428f_b4e8_2a2468648e19 ; + owl:annotatedTarget "Crystal"@en ; + ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Ancient Greek κρύσταλλος (krústallos, “clear ice”), from κρύος (krúos, “frost”)."@en . [] owl:minQualifiedCardinality "2"^^xsd:nonNegativeInteger . [] owl:qualifiedCardinality "1"^^xsd:nonNegativeInteger . -[] owl:minQualifiedCardinality "1"^^xsd:nonNegativeInteger . +[] owl:qualifiedCardinality "1"^^xsd:nonNegativeInteger . [] owl:qualifiedCardinality "1"^^xsd:nonNegativeInteger . [] owl:minQualifiedCardinality "1"^^xsd:nonNegativeInteger . +[] owl:minQualifiedCardinality "1"^^xsd:nonNegativeInteger . + [] owl:qualifiedCardinality "1"^^xsd:nonNegativeInteger . [] a swrl:Imp ; + rdfs:comment "Ensure that the hasNext relation expresses a strictly one-way causality arrow between two entities."^^rdfs:Literal ; swrl:body [ a swrl:AtomList ; rdf:first [ a swrl:IndividualPropertyAtom ; swrl:argument1 ; swrl:argument2 ; - swrl:propertyPredicate ns1:EMMO_6835537c_d294_4005_a770_ec9621f29ed1 ] ; + swrl:propertyPredicate ns1:EMMO_499e24a5_5072_4c83_8625_fe3f96ae4a8d ] ; rdf:rest () ] ; swrl:head [ a swrl:AtomList ; - rdf:first [ a swrl:SameIndividualAtom ; - swrl:argument1 ; - swrl:argument2 ] ; + rdf:first [ a swrl:IndividualPropertyAtom ; + swrl:argument1 ; + swrl:argument2 ; + swrl:propertyPredicate ns1:EMMO_01e5766d_dac3_4574_8a78_310de92a5c9d ] ; rdf:rest () ] . [] a owl:Axiom ; - owl:annotatedProperty skos:prefLabel ; - owl:annotatedSource ns1:EMMO_b5a5494c_83bf_44aa_a9a6_49b948e68939 ; - owl:annotatedTarget "Boson"@en ; - ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "1940s: named after S.N. Bose."@en . - -[] a owl:Axiom ; - owl:annotatedProperty skos:prefLabel ; - owl:annotatedSource ns1:EMMO_38b579de_4331_40e0_803d_09efa298e726 ; - owl:annotatedTarget "PhysicalObject"@en ; - ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin physica \"study of nature\" (and Ancient Greek φυσικός, “natural”), and Medieval Latin obiectum (“object”, literally “thrown against”)."@en . + owl:annotatedProperty skos:altLabel ; + owl:annotatedSource ns1:EMMO_a15cea10_9946_4d2b_95c5_cfc333fd2abb ; + owl:annotatedTarget "Particle"@en ; + ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin particula (“small part, particle”), diminutive of pars (“part, piece”)."@en . [] a owl:Axiom ; owl:annotatedProperty skos:prefLabel ; @@ -21198,16 +21147,16 @@ H=∑ni=1hia∗i (n≥3)"""^^xsd:string . ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin materia (“matter, stuff, material”), from mater (“mother”)."@en . [] a owl:Axiom ; - owl:annotatedProperty skos:prefLabel ; - owl:annotatedSource ns1:EMMO_d67ee67e_4fac_4676_82c9_aec361dba698 ; - owl:annotatedTarget "isCauseOf"@en ; - ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin causa (“reason, sake, cause”)."@en . + owl:annotatedProperty ns1:EMMO_31252f35_c767_4b97_a877_1235076c3e13 ; + owl:annotatedSource ns1:EMMO_220b7201_d277_4dca_bf6a_5a5e2c4062dd ; + owl:annotatedTarget "The subject of condensed matter physics that deals with the macroscopic and microscopic physical properties of matter, especially the solid and liquid phases which arise from electromagnetic forces between atoms. More generally, the subject deals with \"condensed\" phases of matter: systems of many constituents with strong interactions between them."@en ; + ns1:EMMO_c84c6752_6d64_48cc_9500_e54a3c34898d "https://en.wikipedia.org/wiki/Condensed_matter_physics"@en . [] a owl:Axiom ; - owl:annotatedProperty skos:altLabel ; - owl:annotatedSource ns1:EMMO_a15cea10_9946_4d2b_95c5_cfc333fd2abb ; - owl:annotatedTarget "Particle"@en ; - ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin particula (“small part, particle”), diminutive of pars (“part, piece”)."@en . + owl:annotatedProperty skos:prefLabel ; + owl:annotatedSource ns1:EMMO_38b579de_4331_40e0_803d_09efa298e726 ; + owl:annotatedTarget "PhysicalObject"@en ; + ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin physica \"study of nature\" (and Ancient Greek φυσικός, “natural”), and Medieval Latin obiectum (“object”, literally “thrown against”)."@en . [] a owl:Axiom ; owl:annotatedProperty ns1:EMMO_c7b62dd7_063a_4c2a_8504_42f7264ba83f ; @@ -21217,17 +21166,11 @@ H=∑ni=1hia∗i (n≥3)"""^^xsd:string . The term phase is sometimes used as a synonym for state of matter, but there can be several immiscible phases of the same state of matter. Also, the term phase is sometimes used to refer to a set of equilibrium states demarcated in terms of state variables such as pressure and temperature by a phase boundary on a phase diagram. Because phase boundaries relate to changes in the organization of matter, such as a change from liquid to solid or a more subtle change from one crystal structure to another, this latter usage is similar to the use of "phase" as a synonym for state of matter. However, the state of matter and phase diagram usages are not commensurate with the formal definition given above and the intended meaning must be determined in part from the context in which the term is used."""@en ; ns1:EMMO_c84c6752_6d64_48cc_9500_e54a3c34898d "https://en.wikipedia.org/wiki/Phase_(matter)"@en . -[] a owl:Axiom ; - owl:annotatedProperty ns1:EMMO_31252f35_c767_4b97_a877_1235076c3e13 ; - owl:annotatedSource ns1:EMMO_220b7201_d277_4dca_bf6a_5a5e2c4062dd ; - owl:annotatedTarget "The subject of condensed matter physics that deals with the macroscopic and microscopic physical properties of matter, especially the solid and liquid phases which arise from electromagnetic forces between atoms. More generally, the subject deals with \"condensed\" phases of matter: systems of many constituents with strong interactions between them."@en ; - ns1:EMMO_c84c6752_6d64_48cc_9500_e54a3c34898d "https://en.wikipedia.org/wiki/Condensed_matter_physics"@en . - [] a owl:Axiom ; owl:annotatedProperty skos:prefLabel ; - owl:annotatedSource ns1:EMMO_2d2ecd97_067f_4d0e_950c_d746b7700a31 ; - owl:annotatedTarget "Collection"@en ; - ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin collectio, from colligere ‘gather together’."@en . + owl:annotatedSource ns1:EMMO_b5a5494c_83bf_44aa_a9a6_49b948e68939 ; + owl:annotatedTarget "Boson"@en ; + ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "1940s: named after S.N. Bose."@en . [] a owl:Axiom ; owl:annotatedProperty skos:prefLabel ; @@ -21236,36 +21179,16 @@ The term phase is sometimes used as a synonym for state of matter, but there can ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin elementārius (“elementary”), from elementum (“one of the four elements of antiquity; fundamentals”)."@en . [] a owl:Axiom ; - owl:annotatedProperty rdfs:subClassOf ; - owl:annotatedSource ns1:EMMO_802d3e92_8770_4f98_a289_ccaaab7fdddf ; - owl:annotatedTarget _:89 ; - ns1:EMMO_c7b62dd7_063a_4c2a_8504_42f7264ba83f "All EMMO individuals are part of the most comprehensive entity which is the universe."@en . - -[] a owl:Axiom ; - dcterms:source "J. M. Pingarrón et al., Terminology of electrochemical methods of analysis (IUPAC Recommendations 2019), Pure and Applied Chemistry, 4, 92, 2020, 641-694. https://doi.org/10.1515/pac-2018-0109."^^xsd:string ; + rdfs:seeAlso "https://www.w3.org/TR/2012/REC-owl2-syntax-20121211/#Global_Restrictions_on_Axioms_in_OWL_2_DL"^^xsd:anyURI ; owl:annotatedProperty ns1:EMMO_967080e5_2f42_4eb2_a3a9_c58143e835f9 ; - owl:annotatedSource :StepChronopotentiometry ; - owl:annotatedTarget "chronopotentiometry where the applied current is changed in steps"@en . + owl:annotatedSource ns1:EMMO_c6e77b51_681b_4d04_b20d_a08f2b977470 ; + owl:annotatedTarget "Axiom not included in the theory because of OWL 2 DL global restrictions for decidability."@en . [] a owl:Axiom ; - owl:annotatedProperty rdfs:subClassOf ; - owl:annotatedSource ns1:EMMO_2d2ecd97_067f_4d0e_950c_d746b7700a31 ; - owl:annotatedTarget _:74 ; - ns1:EMMO_c7b62dd7_063a_4c2a_8504_42f7264ba83f "Every collection has at least two item members, since a collection of one item is a self-connected entity (and then an item)."@en . - -[] a swrl:Imp ; - swrl:body [ a swrl:AtomList ; - rdf:first [ a swrl:ClassAtom ; - swrl:argument1 ; - swrl:classPredicate ns1:EMMO_802d3e92_8770_4f98_a289_ccaaab7fdddf ] ; - rdf:rest () ] ; - swrl:head [ a swrl:AtomList ; - rdf:first [ a swrl:IndividualPropertyAtom ; - swrl:argument1 ; - swrl:argument2 ; - swrl:propertyPredicate ns1:EMMO_01e5766d_dac3_4574_8a78_310de92a5c9d ] ; - rdf:rest () ] ; - ns1:EMMO_c7b62dd7_063a_4c2a_8504_42f7264ba83f "Enforcing the fact that an entity cannot cause itself."@en . + owl:annotatedProperty skos:prefLabel ; + owl:annotatedSource ns1:EMMO_3733bd38_ca2b_4264_a92a_3075a1715598 ; + owl:annotatedTarget "isPredecessorOf"@en ; + ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin prae (\"beforehand\") and decedere (\"depart\")."@en . [] a owl:Axiom ; owl:annotatedProperty skos:altLabel ; @@ -21273,18 +21196,24 @@ The term phase is sometimes used as a synonym for state of matter, but there can owl:annotatedTarget "ElementaryParticle"@en ; ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "From Latin elementārius (“elementary”), from elementum (“one of the four elements of antiquity; fundamentals”)."@en . -_:112 owl:inverseOf ns1:EMMO_17e27c22_37e1_468c_9dd7_95e137f73e7f . - -_:74 a owl:Restriction ; - owl:minQualifiedCardinality "2"^^xsd:nonNegativeInteger ; - owl:onClass ns1:EMMO_eb3a768e_d53e_4be9_a23b_0714833c36de ; - owl:onProperty ns1:EMMO_6b7276a4_4b9d_440a_b577_0277539c0fc4 . +[] a owl:Axiom ; + owl:annotatedProperty skos:prefLabel ; + owl:annotatedSource ns1:EMMO_fa3c9d4d_9fc9_4e8a_82c1_28c84e34133a ; + owl:annotatedTarget "FundamentalBoson"@en ; + ns1:EMMO_705f27ae_954c_4f13_98aa_18473fc52b25 "1940s: named after S.N. Bose."@en . -_:89 a owl:Restriction ; - owl:hasValue ns1:EMMO_08cb807c_e626_447b_863f_e2835540e918 ; - owl:onProperty _:112 . +_:155 owl:inverseOf ns1:EMMO_17e27c22_37e1_468c_9dd7_95e137f73e7f . -_:92 a owl:Restriction ; +_:70 a owl:Restriction ; owl:onProperty ns1:EMMO_17e27c22_37e1_468c_9dd7_95e137f73e7f ; owl:someValuesFrom ns1:EMMO_3f9ae00e_810c_4518_aec2_7200e424cf68 . +_:82 a owl:Restriction ; + owl:hasValue ns1:EMMO_08cb807c_e626_447b_863f_e2835540e918 ; + owl:onProperty _:155 . + +_:84 a owl:Restriction ; + owl:minQualifiedCardinality "2"^^xsd:nonNegativeInteger ; + owl:onClass ns1:EMMO_eb3a768e_d53e_4be9_a23b_0714833c36de ; + owl:onProperty ns1:EMMO_6b7276a4_4b9d_440a_b577_0277539c0fc4 . + diff --git a/searchindex.js b/searchindex.js index 970d19c..b8fb1fe 100644 --- a/searchindex.js +++ b/searchindex.js @@ -1 +1 @@ -Search.setIndex({"alltitles": {"ACVoltammetry": [[0, "acvoltammetry"]], "AbrasiveStrippingVoltammetry": [[0, "abrasivestrippingvoltammetry"]], "AccessConditions": [[0, "accessconditions"]], "AdsorptiveStrippingVoltammetry": [[0, "adsorptivestrippingvoltammetry"]], "AlphaSpectrometry": [[0, "alphaspectrometry"]], "Amperometry": [[0, "amperometry"]], "AnalyticalElectronMicroscopy": [[0, "analyticalelectronmicroscopy"]], "AnodicStrippingVoltammetry": [[0, "anodicstrippingvoltammetry"]], "AtomProbeTomography": [[0, "atomprobetomography"]], "AtomicForceMicroscopy": [[0, "atomicforcemicroscopy"]], "BrunauerEmmettTellerMethod": [[0, "brunaueremmetttellermethod"]], "CalibrationData": [[0, "calibrationdata"]], "CalibrationDataPostProcessing": [[0, "calibrationdatapostprocessing"]], "CalibrationProcess": [[0, "calibrationprocess"]], "CalibrationTask": [[0, "calibrationtask"]], "Calorimetry": [[0, "calorimetry"]], "CathodicStrippingVoltammetry": [[0, "cathodicstrippingvoltammetry"]], "CharacterisationComponent": [[0, "characterisationcomponent"]], "CharacterisationData": [[0, "characterisationdata"]], "CharacterisationDataValidation": [[0, "characterisationdatavalidation"]], "CharacterisationEnvironment": [[0, "characterisationenvironment"]], "CharacterisationEnvironmentProperty": [[0, "characterisationenvironmentproperty"]], "CharacterisationExperiment": [[0, "characterisationexperiment"]], "CharacterisationHardware": [[0, "characterisationhardware"]], "CharacterisationHardwareSpecification": [[0, "characterisationhardwarespecification"]], "CharacterisationMeasurementInstrument": [[0, "characterisationmeasurementinstrument"]], "CharacterisationMeasurementProcess": [[0, "characterisationmeasurementprocess"]], "CharacterisationMeasurementTask": [[0, "characterisationmeasurementtask"]], "CharacterisationProcedure": [[0, "characterisationprocedure"]], "CharacterisationProcedureValidation": [[0, "characterisationprocedurevalidation"]], "CharacterisationProperty": [[0, "characterisationproperty"]], "CharacterisationProtocol": [[0, "characterisationprotocol"]], "CharacterisationSoftware": [[0, "characterisationsoftware"]], "CharacterisationSystem": [[0, "characterisationsystem"]], "CharacterisationTask": [[0, "characterisationtask"]], "CharacterisationTechnique": [[0, "characterisationtechnique"]], "CharacterisationWorkflow": [[0, "characterisationworkflow"]], "CharacterisedSample": [[0, "characterisedsample"]], "ChargeDistribution": [[0, "chargedistribution"]], "Chromatography": [[0, "chromatography"]], "Chronoamperometry": [[0, "chronoamperometry"]], "Chronocoulometry": [[0, "chronocoulometry"]], "Chronopotentiometry": [[0, "chronopotentiometry"]], "Classes": [[0, "classes"]], "CompressionTesting": [[0, "compressiontesting"]], "ConductometricTitration": [[0, "conductometrictitration"]], "Conductometry": [[0, "conductometry"]], "ConfocalMicroscopy": [[0, "confocalmicroscopy"]], "CoulometricTitration": [[0, "coulometrictitration"]], "Coulometry": [[0, "coulometry"]], "CreepTesting": [[0, "creeptesting"]], "CriticalAndSupercriticalChromatography": [[0, "criticalandsupercriticalchromatography"]], "CyclicChronopotentiometry": [[0, "cyclicchronopotentiometry"]], "CyclicVoltammetry": [[0, "cyclicvoltammetry"]], "DCPolarography": [[0, "dcpolarography"]], "DataAcquisitionRate": [[0, "dataacquisitionrate"]], "DataAnalysis": [[0, "dataanalysis"]], "DataFiltering": [[0, "datafiltering"]], "DataNormalisation": [[0, "datanormalisation"]], "DataPostProcessing": [[0, "datapostprocessing"]], "DataPreparation": [[0, "datapreparation"]], "DataProcessingThroughCalibration": [[0, "dataprocessingthroughcalibration"]], "DataQuality": [[0, "dataquality"]], "Detector": [[0, "detector"]], "DielectricAndImpedanceSpectroscopy": [[0, "dielectricandimpedancespectroscopy"]], "Dielectrometry": [[0, "dielectrometry"]], "DifferentialLinearPulseVoltammetry": [[0, "differentiallinearpulsevoltammetry"]], "DifferentialPulseVoltammetry": [[0, "differentialpulsevoltammetry"]], "DifferentialRefractiveIndex": [[0, "differentialrefractiveindex"]], "DifferentialScanningCalorimetry": [[0, "differentialscanningcalorimetry"]], "DifferentialStaircasePulseVoltammetry": [[0, "differentialstaircasepulsevoltammetry"]], "DifferentialThermalAnalysis": [[0, "differentialthermalanalysis"]], "Dilatometry": [[0, "dilatometry"]], "DirectCoulometryAtControlledCurrent": [[0, "directcoulometryatcontrolledcurrent"]], "DirectCoulometryAtControlledPotential": [[0, "directcoulometryatcontrolledpotential"]], "DirectCurrentInternalResistance": [[0, "directcurrentinternalresistance"]], "DynamicLightScattering": [[0, "dynamiclightscattering"]], "DynamicMechanicalAnalysis": [[0, "dynamicmechanicalanalysis"]], "DynamicMechanicalSpectroscopy": [[0, "dynamicmechanicalspectroscopy"]], "ElectrochemicalImpedanceSpectroscopy": [[0, "electrochemicalimpedancespectroscopy"]], "ElectrochemicalPiezoelectricMicrogravimetry": [[0, "electrochemicalpiezoelectricmicrogravimetry"]], "ElectrochemicalTesting": [[0, "electrochemicaltesting"]], "Electrogravimetry": [[0, "electrogravimetry"]], "ElectronBackscatterDiffraction": [[0, "electronbackscatterdiffraction"]], "ElectronProbeMicroanalysis": [[0, "electronprobemicroanalysis"]], "Ellipsometry": [[0, "ellipsometry"]], "EnergyDispersiveXraySpectroscopy": [[0, "energydispersivexrayspectroscopy"]], "EnvironmentalScanningElectronMicroscopy": [[0, "environmentalscanningelectronmicroscopy"]], "Exafs": [[0, "exafs"]], "FatigueTesting": [[0, "fatiguetesting"]], "FibDic": [[0, "fibdic"]], "FieldEmissionScanningElectronMicroscopy": [[0, "fieldemissionscanningelectronmicroscopy"]], "FourierTransformInfraredSpectroscopy": [[0, "fouriertransforminfraredspectroscopy"]], "Fractography": [[0, "fractography"]], "FreezingPointDepressionOsmometry": [[0, "freezingpointdepressionosmometry"]], "GalvanostaticIntermittentTitrationTechnique": [[0, "galvanostaticintermittenttitrationtechnique"]], "GammaSpectrometry": [[0, "gammaspectrometry"]], "GasAdsorptionPorosimetry": [[0, "gasadsorptionporosimetry"]], "HPPC": [[0, "hppc"]], "HardnessTesting": [[0, "hardnesstesting"]], "HardwareManufacturer": [[0, "hardwaremanufacturer"]], "HardwareModel": [[0, "hardwaremodel"]], "Hazard": [[0, "hazard"]], "Holder": [[0, "holder"]], "HydrodynamicVoltammetry": [[0, "hydrodynamicvoltammetry"]], "ICI": [[0, "ici"]], "Impedimetry": [[0, "impedimetry"]], "InteractionVolume": [[0, "interactionvolume"]], "IntermediateSample": [[0, "intermediatesample"]], "IonChromatography": [[0, "ionchromatography"]], "IonMobilitySpectrometry": [[0, "ionmobilityspectrometry"]], "IsothermalMicrocalorimetry": [[0, "isothermalmicrocalorimetry"]], "Laboratory": [[0, "laboratory"]], "LevelOfAutomation": [[0, "levelofautomation"]], "LevelOfExpertise": [[0, "levelofexpertise"]], "LightScattering": [[0, "lightscattering"]], "LinearChronopotentiometry": [[0, "linearchronopotentiometry"]], "LinearScanVoltammetry": [[0, "linearscanvoltammetry"]], "MassSpectrometry": [[0, "massspectrometry"]], "MeasurementDataPostProcessing": [[0, "measurementdatapostprocessing"]], "MeasurementParameter": [[0, "measurementparameter"]], "MeasurementSystemAdjustment": [[0, "measurementsystemadjustment"]], "MeasurementTime": [[0, "measurementtime"]], "MechanicalTesting": [[0, "mechanicaltesting"]], "MembraneOsmometry": [[0, "membraneosmometry"]], "MercuryPorosimetry": [[0, "mercuryporosimetry"]], "Microscopy": [[0, "microscopy"]], "Module: Characterisation Methodology Ontology": [[0, "module-characterisation-methodology-ontology"]], "Nanoindentation": [[0, "nanoindentation"]], "NeutronSpinEchoSpectroscopy": [[0, "neutronspinechospectroscopy"]], "Nexafs": [[0, "nexafs"]], "NormalPulseVoltammetry": [[0, "normalpulsevoltammetry"]], "NuclearMagneticResonance": [[0, "nuclearmagneticresonance"]], "Object Properties": [[0, "object-properties"]], "OpenCircuitHold": [[0, "opencircuithold"]], "Operator": [[0, "operator"]], "OpticalMicroscopy": [[0, "opticalmicroscopy"]], "OpticalTesting": [[0, "opticaltesting"]], "Osmometry": [[0, "osmometry"]], "PhotoluminescenceMicroscopy": [[0, "photoluminescencemicroscopy"]], "PhysicsOfInteraction": [[0, "physicsofinteraction"]], "Porosimetry": [[0, "porosimetry"]], "PostProcessingModel": [[0, "postprocessingmodel"]], "PotentiometricStrippingAnalysis": [[0, "potentiometricstrippinganalysis"]], "Potentiometry": [[0, "potentiometry"]], "PreparedSample": [[0, "preparedsample"]], "PrimaryData": [[0, "primarydata"]], "Probe": [[0, "probe"]], "ProbeSampleInteraction": [[0, "probesampleinteraction"]], "ProcessingReproducibility": [[0, "processingreproducibility"]], "Profilometry": [[0, "profilometry"]], "PseudoOpenCircuitVoltageMethod": [[0, "pseudoopencircuitvoltagemethod"]], "PulsedElectroacousticMethod": [[0, "pulsedelectroacousticmethod"]], "RamanSpectroscopy": [[0, "ramanspectroscopy"]], "Rationale": [[0, "rationale"]], "RawData": [[0, "rawdata"]], "RawSample": [[0, "rawsample"]], "ReferenceSample": [[0, "referencesample"]], "References": [[0, null]], "Sample": [[0, "sample"]], "SampleInspection": [[0, "sampleinspection"]], "SampleInspectionInstrument": [[0, "sampleinspectioninstrument"]], "SampleInspectionParameter": [[0, "sampleinspectionparameter"]], "SamplePreparation": [[0, "samplepreparation"]], "SamplePreparationInstrument": [[0, "samplepreparationinstrument"]], "SamplePreparationParameter": [[0, "samplepreparationparameter"]], "SampledDCPolarography": [[0, "sampleddcpolarography"]], "SamplingProcess": [[0, "samplingprocess"]], "ScanningAugerElectronMicroscopy": [[0, "scanningaugerelectronmicroscopy"]], "ScanningElectronMicroscopy": [[0, "scanningelectronmicroscopy"]], "ScanningKelvinProbe": [[0, "scanningkelvinprobe"]], "ScanningProbeMicroscopy": [[0, "scanningprobemicroscopy"]], "ScanningTunnelingMicroscopy": [[0, "scanningtunnelingmicroscopy"]], "ScatteringAndDiffraction": [[0, "scatteringanddiffraction"]], "SecondaryData": [[0, "secondarydata"]], "SecondaryIonMassSpectrometry": [[0, "secondaryionmassspectrometry"]], "ShearOrTorsionTesting": [[0, "shearortorsiontesting"]], "Signal": [[0, "signal"]], "Spectrometry": [[0, "spectrometry"]], "Spectroscopy": [[0, "spectroscopy"]], "SquareWaveVoltammetry": [[0, "squarewavevoltammetry"]], "StepChronopotentiometry": [[0, "stepchronopotentiometry"]], "StrippingVoltammetry": [[0, "strippingvoltammetry"]], "Synchrotron": [[0, "synchrotron"]], "TensileTesting": [[0, "tensiletesting"]], "ThermochemicalTesting": [[0, "thermochemicaltesting"]], "Thermogravimetry": [[0, "thermogravimetry"]], "ThreePointBendingTesting": [[0, "threepointbendingtesting"]], "Tomography": [[0, "tomography"]], "TransmissionElectronMicroscopy": [[0, "transmissionelectronmicroscopy"]], "UltrasonicTesting": [[0, "ultrasonictesting"]], "UserCase": [[0, "usercase"]], "VaporPressureDepressionOsmometry": [[0, "vaporpressuredepressionosmometry"]], "Viscometry": [[0, "viscometry"]], "Voltammetry": [[0, "voltammetry"]], "VoltammetryAtARotatingDiskElectrode": [[0, "voltammetryatarotatingdiskelectrode"]], "WearTesting": [[0, "weartesting"]], "XpsVariableKinetic": [[0, "xpsvariablekinetic"]], "XrayDiffraction": [[0, "xraydiffraction"]], "XrayPowderDiffraction": [[0, "xraypowderdiffraction"]], "XrdGrazingIncidence": [[0, "xrdgrazingincidence"]], "hasAccessConditions": [[0, "hasaccessconditions"]], "hasBeginCharacterisationTask": [[0, "hasbegincharacterisationtask"]], "hasCharacterisationComponent": [[0, "hascharacterisationcomponent"]], "hasCharacterisationEnvironment": [[0, "hascharacterisationenvironment"]], "hasCharacterisationEnvironmentProperty": [[0, "hascharacterisationenvironmentproperty"]], "hasCharacterisationInput": [[0, "hascharacterisationinput"]], "hasCharacterisationMeasurementInstrument": [[0, "hascharacterisationmeasurementinstrument"]], "hasCharacterisationOutput": [[0, "hascharacterisationoutput"]], "hasCharacterisationProcedureValidation": [[0, "hascharacterisationprocedurevalidation"]], "hasCharacterisationProperty": [[0, "hascharacterisationproperty"]], "hasCharacterisationSoftware": [[0, "hascharacterisationsoftware"]], "hasCharacterisationTask": [[0, "hascharacterisationtask"]], "hasDataAcquisitionRate": [[0, "hasdataacquisitionrate"]], "hasDataProcessingThroughCalibration": [[0, "hasdataprocessingthroughcalibration"]], "hasDataQuality": [[0, "hasdataquality"]], "hasDataset": [[0, "hasdataset"]], "hasDateOfCalibration": [[0, "hasdateofcalibration"]], "hasEndCharacterisationTask": [[0, "hasendcharacterisationtask"]], "hasHardwareSpecification": [[0, "hashardwarespecification"]], "hasHazard": [[0, "hashazard"]], "hasHolder": [[0, "hasholder"]], "hasInstrumentForCalibration": [[0, "hasinstrumentforcalibration"]], "hasInteractionVolume": [[0, "hasinteractionvolume"]], "hasInteractionWithProbe": [[0, "hasinteractionwithprobe"]], "hasInteractionWithSample": [[0, "hasinteractionwithsample"]], "hasLab": [[0, "haslab"]], "hasLevelOfAutomation": [[0, "haslevelofautomation"]], "hasManufacturer": [[0, "hasmanufacturer"]], "hasMeasurementDetector": [[0, "hasmeasurementdetector"]], "hasMeasurementParameter": [[0, "hasmeasurementparameter"]], "hasMeasurementProbe": [[0, "hasmeasurementprobe"]], "hasMeasurementSample": [[0, "hasmeasurementsample"]], "hasMeasurementTime": [[0, "hasmeasurementtime"]], "hasModel": [[0, "hasmodel"]], "hasOperator": [[0, "hasoperator"]], "hasPeerReviewedArticle": [[0, "haspeerreviewedarticle"]], "hasPhysicsOfInteraction": [[0, "hasphysicsofinteraction"]], "hasPostProcessingModel": [[0, "haspostprocessingmodel"]], "hasProcessingReproducibility": [[0, "hasprocessingreproducibility"]], "hasReferenceSample": [[0, "hasreferencesample"]], "hasSampleBeforeSamplePreparation": [[0, "hassamplebeforesamplepreparation"]], "hasSampleForInspection": [[0, "hassampleforinspection"]], "hasSampleInspectionInstrument": [[0, "hassampleinspectioninstrument"]], "hasSampleInspectionParameter": [[0, "hassampleinspectionparameter"]], "hasSamplePreparationInstrument": [[0, "hassamplepreparationinstrument"]], "hasSamplePreparationParameter": [[0, "hassamplepreparationparameter"]], "hasSampledSample": [[0, "hassampledsample"]], "hasUniqueID": [[0, "hasuniqueid"]], "requiresLevelOfExpertise": [[0, "requireslevelofexpertise"]], "userCaseHasCharacterisationProcedure": [[0, "usercasehascharacterisationprocedure"]]}, "docnames": ["chameo", "index"], "envversion": {"sphinx": 64, "sphinx.domains.c": 3, "sphinx.domains.changeset": 1, "sphinx.domains.citation": 1, "sphinx.domains.cpp": 9, "sphinx.domains.index": 1, "sphinx.domains.javascript": 3, "sphinx.domains.math": 2, "sphinx.domains.python": 4, "sphinx.domains.rst": 2, "sphinx.domains.std": 2}, "filenames": ["chameo.rst", "index.rst"], "indexentries": {}, "objects": {}, "objnames": {}, "objtypes": {}, "terms": {"": 0, "0": 0, "000": 0, "00332": 0, "0109": 0, "023": 0, "04": 0, "1": 0, "10": 0, "100": 0, "10012": 0, "1007": 0, "11": 0, "114": 0, "12": 0, "13": 0, "14": 0, "15": 0, "150": 0, "1515": 0, "17858": 0, "1890": 0, "1967": 0, "2": 0, "20": 0, "200": 0, "2007": 0, "2018": 0, "3": 0, "30": 0, "3d": 0, "3nm": 0, "3rd": 0, "4": 0, "40": 0, "5": 0, "50": 0, "5nm": 0, "6": 0, "7": 0, "8": 0, "80": 0, "90": 0, "900": 0, "A": 0, "As": 0, "By": 0, "For": 0, "If": 0, "In": 0, "It": 0, "Near": 0, "Of": 0, "Such": 0, "The": 0, "Then": 0, "These": 0, "To": 0, "abbrevi": 0, "abil": 0, "abl": 0, "about": 0, "abov": 0, "abras": 0, "absorb": 0, "absorpt": 0, "ac": 0, "access": 0, "accompani": 0, "accomplish": 0, "accord": 0, "account": 0, "accumul": 0, "accur": 0, "accuraci": 0, "achiev": 0, "acid": 0, "acquir": 0, "acquisit": 0, "across": 0, "act": 0, "action": 0, "activ": 0, "actual": 0, "actuat": 0, "acv": 0, "ad": 0, "adapt": 0, "addit": 0, "addition": 0, "adjust": 0, "adsorb": 0, "adsorpt": 0, "adsv": 0, "advanc": 0, "advantag": 0, "advers": 0, "ae": 0, "aem": 0, "aerospac": 0, "affect": 0, "affin": 0, "afm": 0, "after": 0, "against": 0, "agent": 0, "aim": 0, "air": 0, "aircraft": 0, "albeit": 0, "algorithm": 0, "aliquot": 0, "all": 0, "alloi": 0, "allow": 0, "alon": 0, "along": 0, "alpha": 0, "alreadi": 0, "also": 0, "altern": 0, "although": 0, "altlabel": 0, "aluminium": 0, "amalgam": 0, "ambient": 0, "amount": 0, "amp": 0, "amperiometricdetect": 0, "amperometr": 0, "amperometriccurrenttimecurv": 0, "amplitud": 0, "ampoul": 0, "an": 0, "analog": 0, "analys": 0, "analysi": 0, "analyt": 0, "analyz": 0, "ancient": 0, "and2": 0, "andadapt": 0, "angl": 0, "ani": 0, "annot": 0, "annul": 0, "anod": 0, "anoth": 0, "anti": 0, "appli": 0, "applic": 0, "applicationprogram": 0, "apport": 0, "approach": 0, "apt": 0, "ar": 0, "archaeologi": 0, "area": 0, "argon": 0, "around": 0, "arrai": 0, "ascertain": 0, "assai": 0, "assembl": 0, "assess": 0, "assign": 0, "associ": 0, "assum": 0, "astrophys": 0, "asv": 0, "asymmetr": 0, "atmospher": 0, "atom": 0, "atomiclay": 0, "atsom": 0, "attach": 0, "attribut": 0, "auger": 0, "auto": 0, "autom": 0, "automat": 0, "automot": 0, "auxiliari": 0, "avail": 0, "averag": 0, "avoid": 0, "ax": 0, "back": 0, "background": 0, "backscatt": 0, "backward": 0, "band": 0, "base": 0, "baselin": 0, "basi": 0, "basic": 0, "batch": 0, "batteri": 0, "beam": 0, "becaus": 0, "becom": 0, "been": 0, "beer": 0, "befor": 0, "behav": 0, "behavior": 0, "behaviour": 0, "behind": 0, "being": 0, "belief": 0, "below": 0, "bend": 0, "bet": 0, "bet_theori": 0, "beta": 0, "better": 0, "between": 0, "bia": 0, "biamperometri": 0, "bias": 0, "biaxial": 0, "big": 0, "bind": 0, "biolog": 0, "biologi": 0, "biomolecul": 0, "bipotentiometri": 0, "bismuth": 0, "block": 0, "bode": 0, "bodi": 0, "bombard": 0, "both": 0, "boundari": 0, "bragg": 0, "branch": 0, "break": 0, "bridg": 0, "broad": 0, "broadli": 0, "brownian": 0, "bse": 0, "buffer": 0, "bulk": 0, "c": 0, "cal": 0, "calcul": 0, "calibr": 0, "calibratedmeasur": 0, "call": 0, "calli": 0, "calor": 0, "calorimet": 0, "camera": 0, "can": 0, "cannot": 0, "cantilev": 0, "capabl": 0, "capac": 0, "capacit": 0, "capillari": 0, "captur": 0, "carbon": 0, "care": 0, "carri": 0, "carrier": 0, "case": 0, "categori": 0, "cathod": 0, "cathodoluminesc": 0, "cation": 0, "caus": 0, "cell": 0, "center": 0, "centrat": 0, "certain": 0, "certifi": 0, "chain": 0, "chamber": 0, "chameo": 0, "chang": 0, "channel": 0, "character": 0, "characterias": 0, "characterisationhardwaremanufactur": 0, "characterisationhardwaremodel": 0, "characterisationinstru": 0, "characterist": 0, "charg": 0, "check": 0, "chemic": 0, "chemisorpt": 0, "chemistri": 0, "choic": 0, "cholesterol": 0, "chosen": 0, "circuit": 0, "cl": 0, "classif": 0, "clear": 0, "close": 0, "clsm": 0, "coat": 0, "coeffici": 0, "collect": 0, "collim": 0, "colloid": 0, "color": 0, "colour": 0, "combin": 0, "come": 0, "commensur": 0, "comment": 0, "common": 0, "commonli": 0, "compact": 0, "comparison": 0, "compart": 0, "compendium": 0, "compet": 0, "complementari": 0, "complex": 0, "complianc": 0, "compon": 0, "compos": 0, "composit": 0, "compound": 0, "compress": 0, "compris": 0, "comput": 0, "con": 0, "concentr": 0, "conceptu": 0, "concret": 0, "condens": 0, "condit": 0, "conditions1": 0, "conduct": 0, "configur": 0, "confirm": 0, "confoc": 0, "confus": 0, "conjunct": 0, "consid": 0, "consider": 0, "consist": 0, "constant": 0, "constitu": 0, "constraint": 0, "construct": 0, "consum": 0, "contact": 0, "contain": 0, "context": 0, "continu": 0, "contrast": 0, "contribut": 0, "control": 0, "convect": 0, "conveni": 0, "convent": 0, "convert": 0, "cool": 0, "coordin": 0, "cor": 0, "core": 0, "correct": 0, "correl": 0, "correspond": 0, "corros": 0, "cosmochemistri": 0, "cottrel": 0, "could": 0, "coulomet": 0, "coulometr": 0, "count": 0, "coupl": 0, "coupon": 0, "cover": 0, "crack": 0, "creation": 0, "creep": 0, "criteria": 0, "critic": 0, "cross": 0, "crush": 0, "crystal": 0, "crystallin": 0, "crystallit": 0, "crystallograph": 0, "csv": 0, "cumul": 0, "current": 0, "curv": 0, "cut": 0, "cv": 0, "cycl": 0, "cycli": 0, "cyclic": 0, "cyclic_voltammetri": 0, "d": 0, "dai": 0, "danger": 0, "dat": 0, "data": 0, "dataprocess": 0, "dataset": 0, "datatypeproperti": 0, "dbpedia": 0, "dbpediarefer": 0, "dc": 0, "de": 0, "dealt": 0, "decai": 0, "decis": 0, "declar": 0, "decomposit": 0, "deconvolut": 0, "decoupl": 0, "decreas": 0, "deem": 0, "deepli": 0, "defect": 0, "defin": 0, "definit": 0, "deform": 0, "degre": 0, "deioniz": 0, "demonstr": 0, "densiti": 0, "depend": 0, "deplet": 0, "deposit": 0, "depress": 0, "depth": 0, "deriv": 0, "describ": 0, "descript": 0, "design": 0, "desir": 0, "desorpt": 0, "destruct": 0, "detail": 0, "detec": 0, "detect": 0, "determin": 0, "develop": 0, "devic": 0, "diagnosi": 0, "diagram": 0, "dic": 0, "dielectr": 0, "dielectricproperti": 0, "dielectrometr": 0, "dif": 0, "differ": 0, "differenti": 0, "differential_pulse_voltammetri": 0, "diffract": 0, "diffus": 0, "digit": 0, "dilut": 0, "dimension": 0, "diminish": 0, "dip": 0, "dipol": 0, "direct": 0, "directli": 0, "disc": 0, "discourag": 0, "discoveri": 0, "discrimin": 0, "dislodg": 0, "dispar": 0, "dispers": 0, "dispersive_x": 0, "displac": 0, "displai": 0, "dispos": 0, "dissolut": 0, "dissolv": 0, "distanc": 0, "distinct": 0, "distinguish": 0, "distribut": 0, "disturb": 0, "divid": 0, "dize": 0, "dl": 0, "dma": 0, "doe": 0, "doi": 0, "domain": 0, "done": 0, "doubl": 0, "doubt": 0, "down": 0, "dpv": 0, "dramat": 0, "drift": 0, "drop": 0, "drug": 0, "dsc": 0, "dt": 0, "dta": 0, "due": 0, "dure": 0, "dynam": 0, "e": 0, "each": 0, "earli": 0, "easili": 0, "ebsd": 0, "ebsp": 0, "echo": 0, "ed": 0, "edg": 0, "edit": 0, "edx": 0, "effect": 0, "effici": 0, "ei": 0, "einstein": 0, "either": 0, "eject": 0, "elabor": 0, "elaps": 0, "elast": 0, "elastiaclli": 0, "electr": 0, "electro": 0, "electroacoust": 0, "electroact": 0, "electroanalyt": 0, "electrochem": 0, "electrochemi": 0, "electrochemical_stripping_analysi": 0, "electrochemistri": 0, "electrod": 0, "electrolys": 0, "electrolysi": 0, "electromagnet": 0, "electron": 0, "electropedia": 0, "electrostat": 0, "element": 0, "elimin": 0, "elong": 0, "elucid": 0, "emiss": 0, "emit": 0, "emitt": 0, "emmo": 0, "emploi": 0, "en": 0, "enabl": 0, "encodeddata": 0, "end": 0, "endotherm": 0, "energet": 0, "energi": 0, "enforc": 0, "engin": 0, "enhanc": 0, "enough": 0, "ensur": 0, "enthalpi": 0, "entir": 0, "entiti": 0, "environ": 0, "environment": 0, "epma": 0, "equal": 0, "equat": 0, "equi": 0, "equip": 0, "equival": 0, "error": 0, "esca": 0, "esem": 0, "establish": 0, "estim": 0, "etc": 0, "ev": 0, "evalu": 0, "evapor": 0, "even": 0, "eventu": 0, "everi": 0, "everyon": 0, "exactli": 0, "examin": 0, "examinationnot": 0, "exampl": 0, "exce": 0, "exchang": 0, "excit": 0, "exclud": 0, "exhibit": 0, "exist": 0, "exotherm": 0, "exp": 0, "experi": 0, "experiment": 0, "expert": 0, "expertis": 0, "exploit": 0, "explos": 0, "exposur": 0, "express": 0, "extend": 0, "extens": 0, "extent": 0, "extern": 0, "extract": 0, "extrem": 0, "f": 0, "fabric": 0, "facil": 0, "facilit": 0, "fact": 0, "factor": 0, "failur": 0, "famili": 0, "farada": 0, "faradai": 0, "fatigu": 0, "fatti": 0, "fe": 0, "featur": 0, "fer": 0, "few": 0, "fib": 0, "fibdicresidualstressanalysi": 0, "field": 0, "film": 0, "filter": 0, "final": 0, "find": 0, "fine": 0, "fingerprint": 0, "first": 0, "fit": 0, "fix": 0, "fixtur": 0, "flaw": 0, "flexibl": 0, "flexur": 0, "flow": 0, "fluctuat": 0, "fluoresc": 0, "focu": 0, "focus": 0, "follow": 0, "food": 0, "forc": 0, "form": 0, "formal": 0, "formalis": 0, "format": 0, "forquant": 0, "forward": 0, "fourier": 0, "fractur": 0, "freez": 0, "frequenc": 0, "frequent": 0, "friction": 0, "from": 0, "frommeasur": 0, "ftir": 0, "full": 0, "function": 0, "functionalicon": 0, "fundament": 0, "further": 0, "fusion": 0, "g": 0, "ga": 0, "gadget": 0, "gain": 0, "galvanostat": 0, "gamma": 0, "gase": 0, "gaseou": 0, "gather": 0, "gaug": 0, "gener": 0, "geochem": 0, "geometri": 0, "geophys": 0, "get": 0, "gitt": 0, "give": 0, "given": 0, "glass": 0, "glassi": 0, "go": 0, "goal": 0, "goldbook": 0, "good": 0, "govern": 0, "grain": 0, "graph\u014d": 0, "gravimetr": 0, "greater": 0, "greatli": 0, "greek": 0, "grid": 0, "group": 0, "grow": 0, "growth": 0, "guid": 0, "ha": 0, "half": 0, "hand": 0, "hard": 0, "harden": 0, "harder": 0, "hardwar": 0, "harmon": 0, "hasag": 0, "hasbegincharacterizationtask": 0, "hasbegintask": 0, "hascharacterizationcompon": 0, "hascharacterizationenviron": 0, "hascharacterizationenvironmentproperti": 0, "hascharacterizationinput": 0, "hascharacterizationmeasurementinstru": 0, "hascharacterizationoutput": 0, "hascharacterizationproperti": 0, "hascharacterizationsoftwar": 0, "hascharacterizationtask": 0, "hascompon": 0, "hasconstitu": 0, "hasconvent": 0, "hasendcharacterizationtask": 0, "hasendtask": 0, "hasholisticpart": 0, "hasinput": 0, "hasmeasuredproperti": 0, "hasoutput": 0, "hasparticip": 0, "hasproperti": 0, "hassampleforprepar": 0, "hassign": 0, "hastask": 0, "hastemporaryparticip": 0, "have": 0, "health": 0, "heat": 0, "height": 0, "henc": 0, "heyrovsk\u00fd": 0, "hi": 0, "high": 0, "higher": 0, "highest": 0, "highli": 0, "histor": 0, "hit": 0, "hmde": 0, "holisticsystem": 0, "homogen": 0, "hour": 0, "how": 0, "howev": 0, "http": 0, "human": 0, "humid": 0, "hv": 0, "hybridpulsepowercharacter": 0, "hybridpulsepowercharacteris": 0, "hydrodynam": 0, "hydrodynamic_voltammetri": 0, "hz": 0, "i": 0, "ident": 0, "identif": 0, "identifi": 0, "iev": 0, "ievref": 0, "ievrefer": 0, "ii": 0, "iii": 0, "ilkovich": 0, "illumin": 0, "im": 0, "imag": 0, "imc": 0, "impact": 0, "imped": 0, "impedimetr": 0, "impli": 0, "import": 0, "impos": 0, "improv": 0, "impur": 0, "incid": 0, "includ": 0, "incorpor": 0, "increas": 0, "increment": 0, "indent": 0, "independ": 0, "index": 0, "indi": 0, "indic": 0, "indicationnot": 0, "indirectli": 0, "indium": 0, "individu": 0, "induc": 0, "induct": 0, "industri": 0, "inelast": 0, "inert": 0, "infiltr": 0, "infinit": 0, "inflect": 0, "influenc": 0, "influenti": 0, "inform": 0, "informationnot": 0, "infrar": 0, "ing": 0, "inher": 0, "inhous": 0, "initi": 0, "input": 0, "inspect": 0, "inspectioncalibrationmicroscopyviscometrydata": 0, "instead": 0, "instrument": 0, "integr": 0, "intend": 0, "intens": 0, "intentionalag": 0, "interact": 0, "interatom": 0, "interchang": 0, "interest": 0, "intermittentcurrentinterruptionmethod": 0, "intern": 0, "interpret": 0, "interrupt": 0, "intersect": 0, "interv": 0, "intramolecular": 0, "introduc": 0, "intrus": 0, "invers": 0, "investig": 0, "involv": 0, "ion": 0, "ion_chromatographi": 0, "ionic": 0, "ioniz": 0, "iri": 0, "iso": 0, "iso17025": 0, "isotherm": 0, "isotrop": 0, "isth": 0, "its": 0, "itself": 0, "iu": 0, "iupac": 0, "iupacrefer": 0, "j": 0, "jaroslav": 0, "judici": 0, "just": 0, "kelvin": 0, "kept": 0, "kev": 0, "kg": 0, "khz": 0, "kikuchi": 0, "kind": 0, "kindsnot": 0, "kinet": 0, "kinteic": 0, "knocker": 0, "known": 0, "kv": 0, "l": 0, "label": 0, "labil": 0, "lag": 0, "larg": 0, "larger": 0, "laser": 0, "later": 0, "latin": 0, "lattic": 0, "law": 0, "layer": 0, "lead": 0, "least": 0, "leav": 0, "len": 0, "length": 0, "less": 0, "level": 0, "levich": 0, "librium": 0, "life": 0, "ligand": 0, "light": 0, "like": 0, "limit": 0, "limt": 0, "line": 0, "linear": 0, "linear_sweep_voltammetri": 0, "linearli": 0, "linearpolar": 0, "linearsweepvoltammetri": 0, "liquid": 0, "load": 0, "local": 0, "locat": 0, "logarithm": 0, "logic": 0, "long": 0, "lose": 0, "low": 0, "lower": 0, "lscm": 0, "lsv": 0, "m": 0, "machin": 0, "macroscop": 0, "made": 0, "magnet": 0, "magnif": 0, "magnifi": 0, "magnitud": 0, "mai": 0, "main": 0, "mainli": 0, "maintain": 0, "major": 0, "make": 0, "manag": 0, "mani": 0, "manifest": 0, "manipul": 0, "manner": 0, "manual": 0, "manufactur": 0, "map": 0, "mass": 0, "match": 0, "materi": 0, "mathemat": 0, "mathematicalmodel": 0, "matric": 0, "matter": 0, "maximum": 0, "mean": 0, "meaning": 0, "meas": 0, "measuer": 0, "measur": 0, "measurand": 0, "measurednot": 0, "measuredproperti": 0, "measuredquantityproperti": 0, "measurementcondit": 0, "measurementresult": 0, "measurementstandard": 0, "measuringinstru": 0, "measuringsystem": 0, "mechan": 0, "mechani": 0, "mechanical_test": 0, "medic": 0, "medium": 0, "melt": 0, "membran": 0, "mention": 0, "mercuri": 0, "met": 0, "metal": 0, "metallurgi": 0, "meter": 0, "method": 0, "metrolog": 0, "metrologi": 0, "metron": 0, "mfe": 0, "mhz": 0, "micro": 0, "microanalysi": 0, "microbal": 0, "microcalorimetri": 0, "micrograph": 0, "micromet": 0, "microscal": 0, "microscop": 0, "microstructur": 0, "microwav": 0, "might": 0, "militari": 0, "mill": 0, "millimet": 0, "million": 0, "misorient": 0, "mistakenli": 0, "mixtur": 0, "ml": 0, "mn": 0, "mobil": 0, "mode": 0, "model": 0, "modern": 0, "modifi": 0, "modulu": 0, "moistur": 0, "mol": 0, "mole": 0, "molecul": 0, "molecular": 0, "moment": 0, "moni": 0, "monitor": 0, "mono": 0, "monochrom": 0, "monochromat": 0, "monochromatis": 0, "monomolecular": 0, "more": 0, "moreov": 0, "morpholog": 0, "morphologi": 0, "most": 0, "motion": 0, "mount": 0, "move": 0, "movement": 0, "mr": 0, "much": 0, "multi": 0, "multipl": 0, "must": 0, "mv": 0, "mw": 0, "n": 0, "name": 0, "nanc": 0, "nanomet": 0, "nanoparticl": 0, "nanoscal": 0, "nanosecond": 0, "nanostructur": 0, "narrow": 0, "nation": 0, "natur": 0, "nearli": 0, "necessari": 0, "need": 0, "neg": 0, "neglig": 0, "neighbour": 0, "nernst": 0, "net": 0, "neutron": 0, "nevertheless": 0, "nitrogen": 0, "nize": 0, "nm": 0, "nmr": 0, "nois": 0, "nomin": 0, "nominalproperti": 0, "non": 0, "nor": 0, "normal": 0, "notch": 0, "note": 0, "notion": 0, "now": 0, "npv": 0, "nse": 0, "nsf": 0, "nuclear": 0, "nuclei": 0, "nuclid": 0, "number": 0, "numer": 0, "nyquist": 0, "obei": 0, "objectproperti": 0, "observ": 0, "obtain": 0, "occasion": 0, "occur": 0, "oceanographi": 0, "ocvhold": 0, "offer": 0, "offset": 0, "often": 0, "oldest": 0, "oliv": 0, "onc": 0, "one": 0, "onli": 0, "onset": 0, "onto": 0, "open": 0, "openform": 0, "optic": 0, "option": 0, "order": 0, "org": 0, "organ": 0, "orient": 0, "origin": 0, "osm": 0, "osmol": 0, "osmot": 0, "osteryoungsquarewavevoltammetri": 0, "oswv": 0, "other": 0, "out": 0, "outcom": 0, "output": 0, "outsid": 0, "over": 0, "overal": 0, "oxi": 0, "oxid": 0, "pac": 0, "page": 0, "palm": 0, "paramet": 0, "parent": 0, "part": 0, "parti": 0, "partial": 0, "particl": 0, "pass": 0, "past": 0, "pathlength": 0, "pattern": 0, "pc": 0, "pea": 0, "peak": 0, "penetr": 0, "per": 0, "percent": 0, "perform": 0, "period": 0, "perman": 0, "permiss": 0, "permit": 0, "person": 0, "perturb": 0, "pharr": 0, "phase": 0, "phenomena": 0, "phonon": 0, "phosphor": 0, "phosphoresc": 0, "photoabsorpt": 0, "photoelectr": 0, "photoelectron": 0, "photograph": 0, "photoluminesc": 0, "photometri": 0, "photon": 0, "physic": 0, "physicist": 0, "physicsequ": 0, "pinhol": 0, "pipework": 0, "place": 0, "plane": 0, "plasma": 0, "plastic": 0, "platen": 0, "plot": 0, "plu": 0, "point": 0, "point_flexural_test": 0, "poisson": 0, "polar": 0, "polaris": 0, "polarogram": 0, "polarograph": 0, "polarographi": 0, "polish": 0, "polyethylen": 0, "polym": 0, "polymer": 0, "popul": 0, "pore": 0, "poros": 0, "porou": 0, "portabl": 0, "portion": 0, "posit": 0, "possess": 0, "possibl": 0, "possibli": 0, "post": 0, "potenti": 0, "potentiogram": 0, "potentiometr": 0, "powder": 0, "powder_diffract": 0, "power": 0, "practic": 0, "pre": 0, "precess": 0, "precipita": 0, "precis": 0, "preclud": 0, "preflabel": 0, "prepar": 0, "preparationsampl": 0, "prerequisit": 0, "prerequisitefor": 0, "prescrib": 0, "preselect": 0, "presenc": 0, "present": 0, "preset": 0, "pressur": 0, "previou": 0, "primari": 0, "principl": 0, "problem": 0, "procedur": 0, "process": 0, "produc": 0, "product": 0, "profil": 0, "program": 0, "programm": 0, "progress": 0, "project": 0, "prolong": 0, "propag": 0, "proper": 0, "properli": 0, "propertyvalu": 0, "propor": 0, "proport": 0, "propos": 0, "protocol": 0, "provid": 0, "psa": 0, "psd": 0, "pseudo": 0, "pseudoocv": 0, "puls": 0, "pure": 0, "puriti": 0, "purpos": 0, "q": 0, "q1136979": 0, "q1147647": 0, "q11778221": 0, "q120895154": 0, "q120906986": 0, "q12101244": 0, "q17028237": 0, "q2300905": 0, "q3492904": 0, "q386334": 0, "q4016323": 0, "q4016325": 0, "q5275361": 0, "q620700": 0, "q795838": 0, "q900632": 0, "q901180": 0, "q901559": 0, "q902953": 0, "q904093": 0, "q939328": 0, "qel": 0, "qt": 0, "qualifi": 0, "qualit": 0, "qualiti": 0, "qualitycontrol": 0, "quantif": 0, "quantifi": 0, "quantit": 0, "quantiti": 0, "quantum": 0, "quartz": 0, "quasi": 0, "quasistat": 0, "quot": 0, "radiat": 0, "radio": 0, "radioact": 0, "radiologi": 0, "radiometr": 0, "radionuclid": 0, "radiu": 0, "rai": 0, "raman": 0, "ramp": 0, "randl": 0, "randomli": 0, "rang": 0, "rate": 0, "ratio": 0, "raw": 0, "ray_crystallographi": 0, "ray_spectroscopi": 0, "rayleigh": 0, "reach": 0, "react": 0, "reaction": 0, "reactiv": 0, "reagent": 0, "real": 0, "realiti": 0, "rearrang": 0, "reason": 0, "recalibr": 0, "receiv": 0, "record": 0, "redox": 0, "reduc": 0, "reduct": 0, "referencemateri": 0, "referencespecimen": 0, "reflect": 0, "refract": 0, "region": 0, "regular": 0, "rel": 0, "relat": 0, "relationship": 0, "relev": 0, "reli": 0, "remco": 0, "remov": 0, "reorient": 0, "repeat": 0, "replac": 0, "replic": 0, "repres": 0, "represent": 0, "reproduc": 0, "requir": 0, "research": 0, "residu": 0, "resist": 0, "reso": 0, "resolut": 0, "resolv": 0, "reson": 0, "respect": 0, "respond": 0, "respons": 0, "rest": 0, "restrict": 0, "result": 0, "reveal": 0, "revers": 0, "rigid": 0, "ring": 0, "robust": 0, "root": 0, "rotat": 0, "rough": 0, "roughli": 0, "routin": 0, "rule": 0, "run": 0, "s05661": 0, "s10832": 0, "sacrif": 0, "safeti": 0, "salt": 0, "same": 0, "sauerbrei": 0, "scale": 0, "scan": 0, "scatter": 0, "scienc": 0, "scientif": 0, "scintil": 0, "scope": 0, "scratch": 0, "screen": 0, "se": 0, "second": 0, "secondari": 0, "section": 0, "sector": 0, "secur": 0, "see": 0, "selec": 0, "select": 0, "selfcalibr": 0, "sem": 0, "semiconductor": 0, "semiperm": 0, "sensi": 0, "sensit": 0, "sensor": 0, "sent": 0, "sepa": 0, "separ": 0, "sequenc": 0, "seri": 0, "serum": 0, "servic": 0, "set": 0, "sever": 0, "shape": 0, "sharp": 0, "shift": 0, "short": 0, "should": 0, "show": 0, "si": 0, "sigmoid": 0, "significantli": 0, "sim": 0, "similar": 0, "simpl": 0, "simplest": 0, "simpli": 0, "sinc": 0, "singl": 0, "sinusoid": 0, "site": 0, "size": 0, "skb": 0, "skp": 0, "skpfm": 0, "slice": 0, "slide": 0, "slow": 0, "slowli": 0, "small": 0, "smaller": 0, "snell": 0, "so": 0, "softwar": 0, "solicit": 0, "solid": 0, "solut": 0, "solvent": 0, "some": 0, "someon": 0, "sometim": 0, "sourc": 0, "space": 0, "span": 0, "spatial": 0, "speci": 0, "special": 0, "specialis": 0, "speciat": 0, "specif": 0, "specifi": 0, "specim": 0, "specimen": 0, "spectra": 0, "spectral": 0, "spectromet": 0, "spectroscop": 0, "spectrum": 0, "sphere": 0, "spin": 0, "spm": 0, "spot": 0, "sputter": 0, "squar": 0, "squarewave_voltammetri": 0, "stabl": 0, "stage": 0, "staircas": 0, "stand": 0, "standard": 0, "standardi": 0, "start": 0, "state": 0, "statement": 0, "static": 0, "statist": 0, "steadi": 0, "steel": 0, "stem": 0, "step": 0, "stiff": 0, "stir": 0, "stm": 0, "stoichiometr": 0, "stoke": 0, "stop": 0, "store": 0, "strain": 0, "strength": 0, "stress": 0, "string": 0, "strip": 0, "structur": 0, "studi": 0, "sub": 0, "subclass": 0, "subject": 0, "sublim": 0, "subsequ": 0, "subset": 0, "substanc": 0, "subtract": 0, "success": 0, "successfulli": 0, "suffici": 0, "suit": 0, "superimpos": 0, "supplementarydevicesnot": 0, "suppli": 0, "support": 0, "surfac": 0, "surround": 0, "suscept": 0, "suspens": 0, "switch": 0, "swv": 0, "synchro": 0, "synchron": 0, "synonym": 0, "system": 0, "t": 0, "t0": 0, "tabl": 0, "take": 0, "taken": 0, "target": 0, "task": 0, "tastpolarographi": 0, "techniqu": 0, "techniquecan": 0, "technologi": 0, "tem": 0, "temperatur": 0, "tempor": 0, "ten": 0, "tend": 0, "tensil": 0, "tension": 0, "tensiontest": 0, "term": 0, "terminologi": 0, "test": 0, "textur": 0, "tga": 0, "than": 0, "thei": 0, "thelatt": 0, "thelight": 0, "them": 0, "themeasur": 0, "theori": 0, "thepast": 0, "theprocess": 0, "thequant": 0, "thermal": 0, "thermoanalyt": 0, "thermodynam": 0, "thermogram": 0, "thermogravimetr": 0, "thermomechan": 0, "thi": 0, "thick": 0, "thin": 0, "thing": 0, "thinner": 0, "those": 0, "though": 0, "three": 0, "threepointflexuraltest": 0, "through": 0, "throughout": 0, "thu": 0, "tilt": 0, "time": 0, "tin": 0, "tion": 0, "tional": 0, "tip": 0, "titrant": 0, "titrat": 0, "tive": 0, "tiviti": 0, "tma": 0, "togeth": 0, "tomo": 0, "tomogram": 0, "tomograph": 0, "too": 0, "tool": 0, "topdataproperti": 0, "topobjectproperti": 0, "topograph": 0, "topographi": 0, "total": 0, "toward": 0, "towhich": 0, "toxic": 0, "trace": 0, "traceabl": 0, "tran": 0, "transfer": 0, "transform": 0, "transform_infrared_spectroscopi": 0, "transient": 0, "transit": 0, "transmiss": 0, "transmit": 0, "transport": 0, "travel": 0, "tribolog": 0, "tube": 0, "tune": 0, "tunnel": 0, "turbid": 0, "twice": 0, "two": 0, "type": 0, "typic": 0, "u": 0, "ubbelohd": 0, "ultim": 0, "ultra": 0, "ultrason": 0, "ultrathin": 0, "ultraviolet": 0, "uncertainti": 0, "uncertaintyfor": 0, "uncoat": 0, "under": 0, "undergo": 0, "underli": 0, "understand": 0, "undetect": 0, "uniaxi": 0, "uniform": 0, "uniqu": 0, "uniqueid": 0, "unit": 0, "unknown": 0, "unprocess": 0, "until": 0, "up": 0, "upac": 0, "upon": 0, "us": 0, "usag": 0, "useabl": 0, "user": 0, "usercasehascharacterizationprocedur": 0, "usual": 0, "ut": 0, "v": 0, "vaccin": 0, "vacuum": 0, "valid": 0, "valu": 0, "valuabl": 0, "vapor": 0, "vari": 0, "variabl": 0, "variant": 0, "variat": 0, "varieti": 0, "variou": 0, "veri": 0, "verif": 0, "version": 0, "versu": 0, "via": 0, "vibrat": 0, "view": 0, "vim": 0, "vimterm": 0, "virtual": 0, "viscomet": 0, "viscos": 0, "visibl": 0, "visual": 0, "vital": 0, "voc": 0, "vocabulari": 0, "volatil": 0, "volta": 0, "voltag": 0, "voltammetr": 0, "voltammogram": 0, "volum": 0, "volumetr": 0, "vpo": 0, "v\u03b4": 0, "w3id": 0, "wa": 0, "wai": 0, "water": 0, "wave": 0, "waveform": 0, "wavelength": 0, "wd": 0, "weak": 0, "wear": 0, "weight": 0, "well": 0, "welldefin": 0, "were": 0, "wet": 0, "what": 0, "whatev": 0, "when": 0, "whenev": 0, "where": 0, "wherea": 0, "which": 0, "while": 0, "whilst": 0, "who": 0, "whole": 0, "why": 0, "wide": 0, "width": 0, "wiki": 0, "wikidata": 0, "wikidatarefer": 0, "wikipedia": 0, "wikipediarefer": 0, "within": 0, "without": 0, "wood": 0, "word": 0, "work": 0, "workflow": 0, "world": 0, "would": 0, "write": 0, "www": 0, "x": 0, "x27": 0, "xa": 0, "xane": 0, "xp": 0, "xrd": 0, "xrpd": 0, "y": 0, "yet": 0, "yield": 0, "you": 0, "young": 0, "your": 0, "zation": 0, "zero": 0, "\u0161ev\u010d\u00edk": 0, "\u02c8r\u0251\u02d0m\u0259n": 0, "\u03b3\u03c1\u03ac\u03c6\u03c9": 0, "\u03b4": 0, "\u03b7": 0, "\u03b70": 0, "\u03bcj": 0, "\u03bcw": 0, "\u03bc\u03ad\u03c4\u03c1\u03bf\u03bd": 0, "\u03c4\u03cc\u03bc\u03bf\u03c2": 0, "\u03c6": 0}, "titles": ["References", "<no title>"], "titleterms": {"abrasivestrippingvoltammetri": 0, "accesscondit": 0, "acvoltammetri": 0, "adsorptivestrippingvoltammetri": 0, "alphaspectrometri": 0, "amperometri": 0, "analyticalelectronmicroscopi": 0, "anodicstrippingvoltammetri": 0, "atomicforcemicroscopi": 0, "atomprobetomographi": 0, "brunaueremmetttellermethod": 0, "calibrationdata": 0, "calibrationdatapostprocess": 0, "calibrationprocess": 0, "calibrationtask": 0, "calorimetri": 0, "cathodicstrippingvoltammetri": 0, "characteris": 0, "characterisationcompon": 0, "characterisationdata": 0, "characterisationdatavalid": 0, "characterisationenviron": 0, "characterisationenvironmentproperti": 0, "characterisationexperi": 0, "characterisationhardwar": 0, "characterisationhardwarespecif": 0, "characterisationmeasurementinstru": 0, "characterisationmeasurementprocess": 0, "characterisationmeasurementtask": 0, "characterisationprocedur": 0, "characterisationprocedurevalid": 0, "characterisationproperti": 0, "characterisationprotocol": 0, "characterisationsoftwar": 0, "characterisationsystem": 0, "characterisationtask": 0, "characterisationtechniqu": 0, "characterisationworkflow": 0, "characterisedsampl": 0, "chargedistribut": 0, "chromatographi": 0, "chronoamperometri": 0, "chronocoulometri": 0, "chronopotentiometri": 0, "class": 0, "compressiontest": 0, "conductometri": 0, "conductometrictitr": 0, "confocalmicroscopi": 0, "coulometri": 0, "coulometrictitr": 0, "creeptest": 0, "criticalandsupercriticalchromatographi": 0, "cyclicchronopotentiometri": 0, "cyclicvoltammetri": 0, "dataacquisitionr": 0, "dataanalysi": 0, "datafilt": 0, "datanormalis": 0, "datapostprocess": 0, "dataprepar": 0, "dataprocessingthroughcalibr": 0, "dataqu": 0, "dcpolarographi": 0, "detector": 0, "dielectricandimpedancespectroscopi": 0, "dielectrometri": 0, "differentiallinearpulsevoltammetri": 0, "differentialpulsevoltammetri": 0, "differentialrefractiveindex": 0, "differentialscanningcalorimetri": 0, "differentialstaircasepulsevoltammetri": 0, "differentialthermalanalysi": 0, "dilatometri": 0, "directcoulometryatcontrolledcurr": 0, "directcoulometryatcontrolledpotenti": 0, "directcurrentinternalresist": 0, "dynamiclightscatt": 0, "dynamicmechanicalanalysi": 0, "dynamicmechanicalspectroscopi": 0, "electrochemicalimpedancespectroscopi": 0, "electrochemicalpiezoelectricmicrogravimetri": 0, "electrochemicaltest": 0, "electrogravimetri": 0, "electronbackscatterdiffract": 0, "electronprobemicroanalysi": 0, "ellipsometri": 0, "energydispersivexrayspectroscopi": 0, "environmentalscanningelectronmicroscopi": 0, "exaf": 0, "fatiguetest": 0, "fibdic": 0, "fieldemissionscanningelectronmicroscopi": 0, "fouriertransforminfraredspectroscopi": 0, "fractographi": 0, "freezingpointdepressionosmometri": 0, "galvanostaticintermittenttitrationtechniqu": 0, "gammaspectrometri": 0, "gasadsorptionporosimetri": 0, "hardnesstest": 0, "hardwaremanufactur": 0, "hardwaremodel": 0, "hasaccesscondit": 0, "hasbegincharacterisationtask": 0, "hascharacterisationcompon": 0, "hascharacterisationenviron": 0, "hascharacterisationenvironmentproperti": 0, "hascharacterisationinput": 0, "hascharacterisationmeasurementinstru": 0, "hascharacterisationoutput": 0, "hascharacterisationprocedurevalid": 0, "hascharacterisationproperti": 0, "hascharacterisationsoftwar": 0, "hascharacterisationtask": 0, "hasdataacquisitionr": 0, "hasdataprocessingthroughcalibr": 0, "hasdataqu": 0, "hasdataset": 0, "hasdateofcalibr": 0, "hasendcharacterisationtask": 0, "hashardwarespecif": 0, "hashazard": 0, "hashold": 0, "hasinstrumentforcalibr": 0, "hasinteractionvolum": 0, "hasinteractionwithprob": 0, "hasinteractionwithsampl": 0, "haslab": 0, "haslevelofautom": 0, "hasmanufactur": 0, "hasmeasurementdetector": 0, "hasmeasurementparamet": 0, "hasmeasurementprob": 0, "hasmeasurementsampl": 0, "hasmeasurementtim": 0, "hasmodel": 0, "hasoper": 0, "haspeerreviewedarticl": 0, "hasphysicsofinteract": 0, "haspostprocessingmodel": 0, "hasprocessingreproduc": 0, "hasreferencesampl": 0, "hassamplebeforesampleprepar": 0, "hassampledsampl": 0, "hassampleforinspect": 0, "hassampleinspectioninstru": 0, "hassampleinspectionparamet": 0, "hassamplepreparationinstru": 0, "hassamplepreparationparamet": 0, "hasuniqueid": 0, "hazard": 0, "holder": 0, "hppc": 0, "hydrodynamicvoltammetri": 0, "ici": 0, "impedimetri": 0, "interactionvolum": 0, "intermediatesampl": 0, "ionchromatographi": 0, "ionmobilityspectrometri": 0, "isothermalmicrocalorimetri": 0, "laboratori": 0, "levelofautom": 0, "levelofexpertis": 0, "lightscatt": 0, "linearchronopotentiometri": 0, "linearscanvoltammetri": 0, "massspectrometri": 0, "measurementdatapostprocess": 0, "measurementparamet": 0, "measurementsystemadjust": 0, "measurementtim": 0, "mechanicaltest": 0, "membraneosmometri": 0, "mercuryporosimetri": 0, "methodologi": 0, "microscopi": 0, "modul": 0, "nanoindent": 0, "neutronspinechospectroscopi": 0, "nexaf": 0, "normalpulsevoltammetri": 0, "nuclearmagneticreson": 0, "object": 0, "ontologi": 0, "opencircuithold": 0, "oper": 0, "opticalmicroscopi": 0, "opticaltest": 0, "osmometri": 0, "photoluminescencemicroscopi": 0, "physicsofinteract": 0, "porosimetri": 0, "postprocessingmodel": 0, "potentiometri": 0, "potentiometricstrippinganalysi": 0, "preparedsampl": 0, "primarydata": 0, "probe": 0, "probesampleinteract": 0, "processingreproduc": 0, "profilometri": 0, "properti": 0, "pseudoopencircuitvoltagemethod": 0, "pulsedelectroacousticmethod": 0, "ramanspectroscopi": 0, "rational": 0, "rawdata": 0, "rawsampl": 0, "refer": 0, "referencesampl": 0, "requireslevelofexpertis": 0, "sampl": 0, "sampleddcpolarographi": 0, "sampleinspect": 0, "sampleinspectioninstru": 0, "sampleinspectionparamet": 0, "sampleprepar": 0, "samplepreparationinstru": 0, "samplepreparationparamet": 0, "samplingprocess": 0, "scanningaugerelectronmicroscopi": 0, "scanningelectronmicroscopi": 0, "scanningkelvinprob": 0, "scanningprobemicroscopi": 0, "scanningtunnelingmicroscopi": 0, "scatteringanddiffract": 0, "secondarydata": 0, "secondaryionmassspectrometri": 0, "shearortorsiontest": 0, "signal": 0, "spectrometri": 0, "spectroscopi": 0, "squarewavevoltammetri": 0, "stepchronopotentiometri": 0, "strippingvoltammetri": 0, "synchrotron": 0, "tensiletest": 0, "thermochemicaltest": 0, "thermogravimetri": 0, "threepointbendingtest": 0, "tomographi": 0, "transmissionelectronmicroscopi": 0, "ultrasonictest": 0, "usercas": 0, "usercasehascharacterisationprocedur": 0, "vaporpressuredepressionosmometri": 0, "viscometri": 0, "voltammetri": 0, "voltammetryatarotatingdiskelectrod": 0, "weartest": 0, "xpsvariablekinet": 0, "xraydiffract": 0, "xraypowderdiffract": 0, "xrdgrazingincid": 0}}) \ No newline at end of file +Search.setIndex({"alltitles": {"ACVoltammetry": [[0, "acvoltammetry"]], "AbrasiveStrippingVoltammetry": [[0, "abrasivestrippingvoltammetry"]], "AccessConditions": [[0, "accessconditions"]], "AdsorptiveStrippingVoltammetry": [[0, "adsorptivestrippingvoltammetry"]], "AlphaSpectrometry": [[0, "alphaspectrometry"]], "Amperometry": [[0, "amperometry"]], "AnalyticalElectronMicroscopy": [[0, "analyticalelectronmicroscopy"]], "AnodicStrippingVoltammetry": [[0, "anodicstrippingvoltammetry"]], "AtomProbeTomography": [[0, "atomprobetomography"]], "AtomicForceMicroscopy": [[0, "atomicforcemicroscopy"]], "BrunauerEmmettTellerMethod": [[0, "brunaueremmetttellermethod"]], "CalibrationData": [[0, "calibrationdata"]], "CalibrationDataPostProcessing": [[0, "calibrationdatapostprocessing"]], "CalibrationProcess": [[0, "calibrationprocess"]], "CalibrationTask": [[0, "calibrationtask"]], "Calorimetry": [[0, "calorimetry"]], "CathodicStrippingVoltammetry": [[0, "cathodicstrippingvoltammetry"]], "CharacterisationComponent": [[0, "characterisationcomponent"]], "CharacterisationData": [[0, "characterisationdata"]], "CharacterisationDataValidation": [[0, "characterisationdatavalidation"]], "CharacterisationEnvironment": [[0, "characterisationenvironment"]], "CharacterisationEnvironmentProperty": [[0, "characterisationenvironmentproperty"]], "CharacterisationExperiment": [[0, "characterisationexperiment"]], "CharacterisationHardware": [[0, "characterisationhardware"]], "CharacterisationHardwareSpecification": [[0, "characterisationhardwarespecification"]], "CharacterisationMeasurementInstrument": [[0, "characterisationmeasurementinstrument"]], "CharacterisationMeasurementProcess": [[0, "characterisationmeasurementprocess"]], "CharacterisationMeasurementTask": [[0, "characterisationmeasurementtask"]], "CharacterisationProcedure": [[0, "characterisationprocedure"]], "CharacterisationProcedureValidation": [[0, "characterisationprocedurevalidation"]], "CharacterisationProperty": [[0, "characterisationproperty"]], "CharacterisationProtocol": [[0, "characterisationprotocol"]], "CharacterisationSoftware": [[0, "characterisationsoftware"]], "CharacterisationSystem": [[0, "characterisationsystem"]], "CharacterisationTask": [[0, "characterisationtask"]], "CharacterisationTechnique": [[0, "characterisationtechnique"]], "CharacterisationWorkflow": [[0, "characterisationworkflow"]], "CharacterisedSample": [[0, "characterisedsample"]], "ChargeDistribution": [[0, "chargedistribution"]], "Chromatography": [[0, "chromatography"]], "Chronoamperometry": [[0, "chronoamperometry"]], "Chronocoulometry": [[0, "chronocoulometry"]], "Chronopotentiometry": [[0, "chronopotentiometry"]], "Classes": [[0, "classes"]], "CompressionTesting": [[0, "compressiontesting"]], "ConductometricTitration": [[0, "conductometrictitration"]], "Conductometry": [[0, "conductometry"]], "ConfocalMicroscopy": [[0, "confocalmicroscopy"]], "CoulometricTitration": [[0, "coulometrictitration"]], "Coulometry": [[0, "coulometry"]], "CreepTesting": [[0, "creeptesting"]], "CriticalAndSupercriticalChromatography": [[0, "criticalandsupercriticalchromatography"]], "CyclicChronopotentiometry": [[0, "cyclicchronopotentiometry"]], "CyclicVoltammetry": [[0, "cyclicvoltammetry"]], "DCPolarography": [[0, "dcpolarography"]], "DataAcquisitionRate": [[0, "dataacquisitionrate"]], "DataAnalysis": [[0, "dataanalysis"]], "DataFiltering": [[0, "datafiltering"]], "DataNormalisation": [[0, "datanormalisation"]], "DataPostProcessing": [[0, "datapostprocessing"]], "DataPreparation": [[0, "datapreparation"]], "DataProcessingThroughCalibration": [[0, "dataprocessingthroughcalibration"]], "DataQuality": [[0, "dataquality"]], "Detector": [[0, "detector"]], "DielectricAndImpedanceSpectroscopy": [[0, "dielectricandimpedancespectroscopy"]], "Dielectrometry": [[0, "dielectrometry"]], "DifferentialLinearPulseVoltammetry": [[0, "differentiallinearpulsevoltammetry"]], "DifferentialPulseVoltammetry": [[0, "differentialpulsevoltammetry"]], "DifferentialRefractiveIndex": [[0, "differentialrefractiveindex"]], "DifferentialScanningCalorimetry": [[0, "differentialscanningcalorimetry"]], "DifferentialStaircasePulseVoltammetry": [[0, "differentialstaircasepulsevoltammetry"]], "DifferentialThermalAnalysis": [[0, "differentialthermalanalysis"]], "Dilatometry": [[0, "dilatometry"]], "DirectCoulometryAtControlledCurrent": [[0, "directcoulometryatcontrolledcurrent"]], "DirectCoulometryAtControlledPotential": [[0, "directcoulometryatcontrolledpotential"]], "DirectCurrentInternalResistance": [[0, "directcurrentinternalresistance"]], "DynamicLightScattering": [[0, "dynamiclightscattering"]], "DynamicMechanicalAnalysis": [[0, "dynamicmechanicalanalysis"]], "DynamicMechanicalSpectroscopy": [[0, "dynamicmechanicalspectroscopy"]], "ElectrochemicalImpedanceSpectroscopy": [[0, "electrochemicalimpedancespectroscopy"]], "ElectrochemicalPiezoelectricMicrogravimetry": [[0, "electrochemicalpiezoelectricmicrogravimetry"]], "ElectrochemicalTesting": [[0, "electrochemicaltesting"]], "Electrogravimetry": [[0, "electrogravimetry"]], "ElectronBackscatterDiffraction": [[0, "electronbackscatterdiffraction"]], "ElectronProbeMicroanalysis": [[0, "electronprobemicroanalysis"]], "Ellipsometry": [[0, "ellipsometry"]], "EnergyDispersiveXraySpectroscopy": [[0, "energydispersivexrayspectroscopy"]], "EnvironmentalScanningElectronMicroscopy": [[0, "environmentalscanningelectronmicroscopy"]], "Exafs": [[0, "exafs"]], "FatigueTesting": [[0, "fatiguetesting"]], "FibDic": [[0, "fibdic"]], "FieldEmissionScanningElectronMicroscopy": [[0, "fieldemissionscanningelectronmicroscopy"]], "FourierTransformInfraredSpectroscopy": [[0, "fouriertransforminfraredspectroscopy"]], "Fractography": [[0, "fractography"]], "FreezingPointDepressionOsmometry": [[0, "freezingpointdepressionosmometry"]], "GalvanostaticIntermittentTitrationTechnique": [[0, "galvanostaticintermittenttitrationtechnique"]], "GammaSpectrometry": [[0, "gammaspectrometry"]], "GasAdsorptionPorosimetry": [[0, "gasadsorptionporosimetry"]], "HPPC": [[0, "hppc"]], "HardnessTesting": [[0, "hardnesstesting"]], "HardwareManufacturer": [[0, "hardwaremanufacturer"]], "HardwareModel": [[0, "hardwaremodel"]], "Hazard": [[0, "hazard"]], "Holder": [[0, "holder"]], "HydrodynamicVoltammetry": [[0, "hydrodynamicvoltammetry"]], "ICI": [[0, "ici"]], "Impedimetry": [[0, "impedimetry"]], "InteractionVolume": [[0, "interactionvolume"]], "IntermediateSample": [[0, "intermediatesample"]], "IonChromatography": [[0, "ionchromatography"]], "IonMobilitySpectrometry": [[0, "ionmobilityspectrometry"]], "IsothermalMicrocalorimetry": [[0, "isothermalmicrocalorimetry"]], "Laboratory": [[0, "laboratory"]], "LevelOfAutomation": [[0, "levelofautomation"]], "LevelOfExpertise": [[0, "levelofexpertise"]], "LightScattering": [[0, "lightscattering"]], "LinearChronopotentiometry": [[0, "linearchronopotentiometry"]], "LinearScanVoltammetry": [[0, "linearscanvoltammetry"]], "MassSpectrometry": [[0, "massspectrometry"]], "MeasurementDataPostProcessing": [[0, "measurementdatapostprocessing"]], "MeasurementParameter": [[0, "measurementparameter"]], "MeasurementSystemAdjustment": [[0, "measurementsystemadjustment"]], "MeasurementTime": [[0, "measurementtime"]], "MechanicalTesting": [[0, "mechanicaltesting"]], "MembraneOsmometry": [[0, "membraneosmometry"]], "MercuryPorosimetry": [[0, "mercuryporosimetry"]], "Microscopy": [[0, "microscopy"]], "Module: Characterisation Methodology Ontology": [[0, "module-characterisation-methodology-ontology"]], "Nanoindentation": [[0, "nanoindentation"]], "NeutronSpinEchoSpectroscopy": [[0, "neutronspinechospectroscopy"]], "Nexafs": [[0, "nexafs"]], "NormalPulseVoltammetry": [[0, "normalpulsevoltammetry"]], "NuclearMagneticResonance": [[0, "nuclearmagneticresonance"]], "Object Properties": [[0, "object-properties"]], "OpenCircuitHold": [[0, "opencircuithold"]], "Operator": [[0, "operator"]], "OpticalMicroscopy": [[0, "opticalmicroscopy"]], "OpticalTesting": [[0, "opticaltesting"]], "Osmometry": [[0, "osmometry"]], "PhotoluminescenceMicroscopy": [[0, "photoluminescencemicroscopy"]], "PhysicsOfInteraction": [[0, "physicsofinteraction"]], "Porosimetry": [[0, "porosimetry"]], "PostProcessingModel": [[0, "postprocessingmodel"]], "PotentiometricStrippingAnalysis": [[0, "potentiometricstrippinganalysis"]], "Potentiometry": [[0, "potentiometry"]], "PreparedSample": [[0, "preparedsample"]], "PrimaryData": [[0, "primarydata"]], "Probe": [[0, "probe"]], "ProbeSampleInteraction": [[0, "probesampleinteraction"]], "ProcessingReproducibility": [[0, "processingreproducibility"]], "Profilometry": [[0, "profilometry"]], "PseudoOpenCircuitVoltageMethod": [[0, "pseudoopencircuitvoltagemethod"]], "PulsedElectroacousticMethod": [[0, "pulsedelectroacousticmethod"]], "RamanSpectroscopy": [[0, "ramanspectroscopy"]], "Rationale": [[0, "rationale"]], "RawData": [[0, "rawdata"]], "RawSample": [[0, "rawsample"]], "ReferenceSample": [[0, "referencesample"]], "References": [[0, null]], "Sample": [[0, "sample"]], "SampleInspection": [[0, "sampleinspection"]], "SampleInspectionInstrument": [[0, "sampleinspectioninstrument"]], "SampleInspectionParameter": [[0, "sampleinspectionparameter"]], "SamplePreparation": [[0, "samplepreparation"]], "SamplePreparationInstrument": [[0, "samplepreparationinstrument"]], "SamplePreparationParameter": [[0, "samplepreparationparameter"]], "SampledDCPolarography": [[0, "sampleddcpolarography"]], "SamplingProcess": [[0, "samplingprocess"]], "ScanningAugerElectronMicroscopy": [[0, "scanningaugerelectronmicroscopy"]], "ScanningElectronMicroscopy": [[0, "scanningelectronmicroscopy"]], "ScanningKelvinProbe": [[0, "scanningkelvinprobe"]], "ScanningProbeMicroscopy": [[0, "scanningprobemicroscopy"]], "ScanningTunnelingMicroscopy": [[0, "scanningtunnelingmicroscopy"]], "ScatteringAndDiffraction": [[0, "scatteringanddiffraction"]], "SecondaryData": [[0, "secondarydata"]], "SecondaryIonMassSpectrometry": [[0, "secondaryionmassspectrometry"]], "ShearOrTorsionTesting": [[0, "shearortorsiontesting"]], "Signal": [[0, "signal"]], "Spectrometry": [[0, "spectrometry"]], "Spectroscopy": [[0, "spectroscopy"]], "SquareWaveVoltammetry": [[0, "squarewavevoltammetry"]], "StepChronopotentiometry": [[0, "stepchronopotentiometry"]], "StrippingVoltammetry": [[0, "strippingvoltammetry"]], "Synchrotron": [[0, "synchrotron"]], "TensileTesting": [[0, "tensiletesting"]], "ThermochemicalTesting": [[0, "thermochemicaltesting"]], "Thermogravimetry": [[0, "thermogravimetry"]], "ThreePointBendingTesting": [[0, "threepointbendingtesting"]], "Tomography": [[0, "tomography"]], "TransmissionElectronMicroscopy": [[0, "transmissionelectronmicroscopy"]], "UltrasonicTesting": [[0, "ultrasonictesting"]], "UserCase": [[0, "usercase"]], "VaporPressureDepressionOsmometry": [[0, "vaporpressuredepressionosmometry"]], "Viscometry": [[0, "viscometry"]], "Voltammetry": [[0, "voltammetry"]], "VoltammetryAtARotatingDiskElectrode": [[0, "voltammetryatarotatingdiskelectrode"]], "WearTesting": [[0, "weartesting"]], "XpsVariableKinetic": [[0, "xpsvariablekinetic"]], "XrayDiffraction": [[0, "xraydiffraction"]], "XrayPowderDiffraction": [[0, "xraypowderdiffraction"]], "XrdGrazingIncidence": [[0, "xrdgrazingincidence"]], "hasAccessConditions": [[0, "hasaccessconditions"]], "hasBeginCharacterisationTask": [[0, "hasbegincharacterisationtask"]], "hasCharacterisationComponent": [[0, "hascharacterisationcomponent"]], "hasCharacterisationEnvironment": [[0, "hascharacterisationenvironment"]], "hasCharacterisationEnvironmentProperty": [[0, "hascharacterisationenvironmentproperty"]], "hasCharacterisationInput": [[0, "hascharacterisationinput"]], "hasCharacterisationMeasurementInstrument": [[0, "hascharacterisationmeasurementinstrument"]], "hasCharacterisationOutput": [[0, "hascharacterisationoutput"]], "hasCharacterisationProcedureValidation": [[0, "hascharacterisationprocedurevalidation"]], "hasCharacterisationProperty": [[0, "hascharacterisationproperty"]], "hasCharacterisationSoftware": [[0, "hascharacterisationsoftware"]], "hasCharacterisationTask": [[0, "hascharacterisationtask"]], "hasDataAcquisitionRate": [[0, "hasdataacquisitionrate"]], "hasDataProcessingThroughCalibration": [[0, "hasdataprocessingthroughcalibration"]], "hasDataQuality": [[0, "hasdataquality"]], "hasDataset": [[0, "hasdataset"]], "hasDateOfCalibration": [[0, "hasdateofcalibration"]], "hasEndCharacterisationTask": [[0, "hasendcharacterisationtask"]], "hasHardwareSpecification": [[0, "hashardwarespecification"]], "hasHazard": [[0, "hashazard"]], "hasHolder": [[0, "hasholder"]], "hasInstrumentForCalibration": [[0, "hasinstrumentforcalibration"]], "hasInteractionVolume": [[0, "hasinteractionvolume"]], "hasInteractionWithProbe": [[0, "hasinteractionwithprobe"]], "hasInteractionWithSample": [[0, "hasinteractionwithsample"]], "hasLab": [[0, "haslab"]], "hasLevelOfAutomation": [[0, "haslevelofautomation"]], "hasManufacturer": [[0, "hasmanufacturer"]], "hasMeasurementDetector": [[0, "hasmeasurementdetector"]], "hasMeasurementParameter": [[0, "hasmeasurementparameter"]], "hasMeasurementProbe": [[0, "hasmeasurementprobe"]], "hasMeasurementSample": [[0, "hasmeasurementsample"]], "hasMeasurementTime": [[0, "hasmeasurementtime"]], "hasModel": [[0, "hasmodel"]], "hasOperator": [[0, "hasoperator"]], "hasPeerReviewedArticle": [[0, "haspeerreviewedarticle"]], "hasPhysicsOfInteraction": [[0, "hasphysicsofinteraction"]], "hasPostProcessingModel": [[0, "haspostprocessingmodel"]], "hasProcessingReproducibility": [[0, "hasprocessingreproducibility"]], "hasReferenceSample": [[0, "hasreferencesample"]], "hasSampleBeforeSamplePreparation": [[0, "hassamplebeforesamplepreparation"]], "hasSampleForInspection": [[0, "hassampleforinspection"]], "hasSampleInspectionInstrument": [[0, "hassampleinspectioninstrument"]], "hasSampleInspectionParameter": [[0, "hassampleinspectionparameter"]], "hasSamplePreparationInstrument": [[0, "hassamplepreparationinstrument"]], "hasSamplePreparationParameter": [[0, "hassamplepreparationparameter"]], "hasSampledSample": [[0, "hassampledsample"]], "hasUniqueID": [[0, "hasuniqueid"]], "requiresLevelOfExpertise": [[0, "requireslevelofexpertise"]], "userCaseHasCharacterisationProcedure": [[0, "usercasehascharacterisationprocedure"]]}, "docnames": ["chameo", "index"], "envversion": {"sphinx": 64, "sphinx.domains.c": 3, "sphinx.domains.changeset": 1, "sphinx.domains.citation": 1, "sphinx.domains.cpp": 9, "sphinx.domains.index": 1, "sphinx.domains.javascript": 3, "sphinx.domains.math": 2, "sphinx.domains.python": 4, "sphinx.domains.rst": 2, "sphinx.domains.std": 2}, "filenames": ["chameo.rst", "index.rst"], "indexentries": {}, "objects": {}, "objnames": {}, "objtypes": {}, "terms": {"": 0, "0": 0, "000": 0, "00332": 0, "0109": 0, "023": 0, "04": 0, "1": 0, "10": 0, "100": 0, "10012": 0, "1007": 0, "11": 0, "114": 0, "12": 0, "13": 0, "14": 0, "15": 0, "150": 0, "1515": 0, "17858": 0, "1890": 0, "1967": 0, "2": 0, "20": 0, "200": 0, "2007": 0, "2018": 0, "3": 0, "30": 0, "3d": 0, "3nm": 0, "3rd": 0, "4": 0, "40": 0, "5": 0, "50": 0, "5nm": 0, "6": 0, "7": 0, "8": 0, "80": 0, "90": 0, "900": 0, "A": 0, "As": 0, "By": 0, "For": 0, "If": 0, "In": 0, "It": 0, "Near": 0, "Of": 0, "Such": 0, "The": 0, "Then": 0, "These": 0, "To": 0, "abbrevi": 0, "abil": 0, "abl": 0, "about": 0, "abov": 0, "abras": 0, "absorb": 0, "absorpt": 0, "ac": 0, "access": 0, "accompani": 0, "accomplish": 0, "accord": 0, "account": 0, "accumul": 0, "accur": 0, "accuraci": 0, "achiev": 0, "acid": 0, "acquir": 0, "acquisit": 0, "across": 0, "act": 0, "action": 0, "activ": 0, "actual": 0, "actuat": 0, "acv": 0, "ad": 0, "adapt": 0, "addit": 0, "addition": 0, "adjust": 0, "adsorb": 0, "adsorpt": 0, "adsv": 0, "advanc": 0, "advantag": 0, "advers": 0, "ae": 0, "aem": 0, "aerospac": 0, "affect": 0, "affin": 0, "afm": 0, "after": 0, "against": 0, "agent": 0, "aim": 0, "air": 0, "aircraft": 0, "albeit": 0, "algorithm": 0, "aliquot": 0, "all": 0, "alloi": 0, "allow": 0, "alon": 0, "along": 0, "alpha": 0, "alreadi": 0, "also": 0, "altern": 0, "although": 0, "altlabel": 0, "aluminium": 0, "amalgam": 0, "ambient": 0, "amount": 0, "amp": 0, "amperiometricdetect": 0, "amperometr": 0, "amperometriccurrenttimecurv": 0, "amplitud": 0, "ampoul": 0, "an": 0, "analog": 0, "analys": 0, "analysi": 0, "analyt": 0, "analyz": 0, "ancient": 0, "and2": 0, "andadapt": 0, "angl": 0, "ani": 0, "annot": 0, "annul": 0, "anod": 0, "anoth": 0, "anti": 0, "appli": 0, "applic": 0, "applicationprogram": 0, "apport": 0, "approach": 0, "apt": 0, "ar": 0, "archaeologi": 0, "area": 0, "argon": 0, "around": 0, "arrai": 0, "ascertain": 0, "assai": 0, "assembl": 0, "assess": 0, "assign": 0, "associ": 0, "assum": 0, "astrophys": 0, "asv": 0, "asymmetr": 0, "atmospher": 0, "atom": 0, "atomiclay": 0, "atsom": 0, "attach": 0, "attribut": 0, "auger": 0, "auto": 0, "autom": 0, "automat": 0, "automot": 0, "auxiliari": 0, "avail": 0, "averag": 0, "avoid": 0, "ax": 0, "back": 0, "background": 0, "backscatt": 0, "backward": 0, "band": 0, "base": 0, "baselin": 0, "basi": 0, "basic": 0, "batch": 0, "batteri": 0, "beam": 0, "becaus": 0, "becom": 0, "been": 0, "beer": 0, "befor": 0, "behav": 0, "behavior": 0, "behaviour": 0, "behind": 0, "being": 0, "belief": 0, "below": 0, "bend": 0, "bet": 0, "bet_theori": 0, "beta": 0, "better": 0, "between": 0, "bia": 0, "biamperometri": 0, "bias": 0, "biaxial": 0, "big": 0, "bind": 0, "biolog": 0, "biologi": 0, "biomolecul": 0, "bipotentiometri": 0, "bismuth": 0, "block": 0, "bode": 0, "bodi": 0, "bombard": 0, "both": 0, "boundari": 0, "bragg": 0, "branch": 0, "break": 0, "bridg": 0, "broad": 0, "broadli": 0, "brownian": 0, "bse": 0, "buffer": 0, "bulk": 0, "c": 0, "calcul": 0, "calibr": 0, "calibratedmeasur": 0, "call": 0, "calli": 0, "calor": 0, "calorimet": 0, "camera": 0, "can": 0, "cannot": 0, "cantilev": 0, "capabl": 0, "capac": 0, "capacit": 0, "capillari": 0, "captur": 0, "carbon": 0, "care": 0, "carri": 0, "carrier": 0, "case": 0, "categori": 0, "cathod": 0, "cathodoluminesc": 0, "cation": 0, "caus": 0, "cell": 0, "center": 0, "centrat": 0, "certain": 0, "certifi": 0, "chain": 0, "chamber": 0, "chameo": 0, "chang": 0, "channel": 0, "character": 0, "characterias": 0, "characterisationhardwaremanufactur": 0, "characterisationhardwaremodel": 0, "characterisationinstru": 0, "characterist": 0, "charg": 0, "check": 0, "chemic": 0, "chemisorpt": 0, "chemistri": 0, "choic": 0, "cholesterol": 0, "chosen": 0, "circuit": 0, "cl": 0, "classif": 0, "clear": 0, "close": 0, "clsm": 0, "coat": 0, "coeffici": 0, "collect": 0, "collim": 0, "colloid": 0, "color": 0, "colour": 0, "combin": 0, "come": 0, "commensur": 0, "comment": 0, "common": 0, "commonli": 0, "compact": 0, "comparison": 0, "compart": 0, "compendium": 0, "compet": 0, "complementari": 0, "complex": 0, "complianc": 0, "compon": 0, "compos": 0, "composit": 0, "compound": 0, "compress": 0, "compris": 0, "comput": 0, "con": 0, "concentr": 0, "conceptu": 0, "concret": 0, "condens": 0, "condit": 0, "conditions1": 0, "conduct": 0, "configur": 0, "confirm": 0, "confoc": 0, "confus": 0, "conjunct": 0, "consid": 0, "consider": 0, "consist": 0, "constant": 0, "constitu": 0, "constraint": 0, "construct": 0, "consum": 0, "contact": 0, "contain": 0, "context": 0, "continu": 0, "contrast": 0, "contribut": 0, "control": 0, "convect": 0, "conveni": 0, "convent": 0, "convert": 0, "cool": 0, "coordin": 0, "cor": 0, "core": 0, "correct": 0, "correl": 0, "correspond": 0, "corros": 0, "cosmochemistri": 0, "cottrel": 0, "could": 0, "coulomet": 0, "coulometr": 0, "count": 0, "coupl": 0, "coupon": 0, "cover": 0, "crack": 0, "creation": 0, "creep": 0, "criteria": 0, "critic": 0, "cross": 0, "crush": 0, "crystal": 0, "crystallin": 0, "crystallit": 0, "crystallograph": 0, "csv": 0, "cumul": 0, "current": 0, "curv": 0, "cut": 0, "cv": 0, "cycl": 0, "cyclic": 0, "cyclic_voltammetri": 0, "d": 0, "dai": 0, "danger": 0, "dat": 0, "data": 0, "dataprocess": 0, "dataset": 0, "datatypeproperti": 0, "dbpedia": 0, "dbpediarefer": 0, "dc": 0, "de": 0, "dealt": 0, "decai": 0, "decis": 0, "declar": 0, "decomposit": 0, "deconvolut": 0, "decoupl": 0, "decreas": 0, "deem": 0, "deepli": 0, "defect": 0, "defin": 0, "definit": 0, "deform": 0, "degre": 0, "deioniz": 0, "demonstr": 0, "densiti": 0, "depend": 0, "deplet": 0, "deposit": 0, "depress": 0, "depth": 0, "deriv": 0, "describ": 0, "descript": 0, "design": 0, "desir": 0, "desorpt": 0, "destruct": 0, "detail": 0, "detec": 0, "detect": 0, "determin": 0, "develop": 0, "devic": 0, "diagnosi": 0, "diagram": 0, "dic": 0, "dielectr": 0, "dielectricproperti": 0, "dielectrometr": 0, "differ": 0, "differenti": 0, "differential_pulse_voltammetri": 0, "diffract": 0, "diffus": 0, "digit": 0, "dilut": 0, "dimension": 0, "diminish": 0, "dip": 0, "dipol": 0, "direct": 0, "directli": 0, "disc": 0, "discourag": 0, "discoveri": 0, "discrimin": 0, "dislodg": 0, "dispar": 0, "dispers": 0, "dispersive_x": 0, "displac": 0, "displai": 0, "dispos": 0, "dissolut": 0, "dissolv": 0, "distanc": 0, "distinct": 0, "distinguish": 0, "distribut": 0, "disturb": 0, "divid": 0, "dize": 0, "dl": 0, "dma": 0, "doe": 0, "doi": 0, "domain": 0, "done": 0, "doubl": 0, "doubt": 0, "down": 0, "dpv": 0, "dramat": 0, "drift": 0, "drop": 0, "drug": 0, "dsc": 0, "dt": 0, "dta": 0, "due": 0, "dure": 0, "dynam": 0, "e": 0, "each": 0, "earli": 0, "easili": 0, "ebsd": 0, "ebsp": 0, "echo": 0, "ed": 0, "edg": 0, "edit": 0, "edx": 0, "effect": 0, "effici": 0, "ei": 0, "einstein": 0, "either": 0, "eject": 0, "elabor": 0, "elaps": 0, "elast": 0, "elastiaclli": 0, "electr": 0, "electro": 0, "electroacoust": 0, "electroact": 0, "electroanalyt": 0, "electrochem": 0, "electrochemical_stripping_analysi": 0, "electrochemistri": 0, "electrod": 0, "electrolys": 0, "electrolysi": 0, "electromagnet": 0, "electron": 0, "electropedia": 0, "electrostat": 0, "element": 0, "elimin": 0, "elong": 0, "elucid": 0, "emiss": 0, "emit": 0, "emitt": 0, "emmo": 0, "emploi": 0, "en": 0, "enabl": 0, "encodeddata": 0, "end": 0, "endotherm": 0, "energet": 0, "energi": 0, "enforc": 0, "engin": 0, "enhanc": 0, "enough": 0, "ensur": 0, "enthalpi": 0, "entir": 0, "entiti": 0, "environ": 0, "environment": 0, "epma": 0, "equal": 0, "equat": 0, "equi": 0, "equip": 0, "equival": 0, "error": 0, "esca": 0, "esem": 0, "establish": 0, "estim": 0, "etc": 0, "ev": 0, "evalu": 0, "evapor": 0, "even": 0, "eventu": 0, "everi": 0, "everyon": 0, "exactli": 0, "examin": 0, "examinationnot": 0, "exampl": 0, "exce": 0, "exchang": 0, "excit": 0, "exclud": 0, "exhibit": 0, "exist": 0, "exotherm": 0, "exp": 0, "experi": 0, "experiment": 0, "expert": 0, "expertis": 0, "exploit": 0, "explos": 0, "exposur": 0, "express": 0, "extend": 0, "extens": 0, "extent": 0, "extern": 0, "extract": 0, "extrem": 0, "f": 0, "fabric": 0, "facil": 0, "facilit": 0, "fact": 0, "factor": 0, "failur": 0, "famili": 0, "farada": 0, "faradai": 0, "fatigu": 0, "fatti": 0, "fe": 0, "featur": 0, "fer": 0, "few": 0, "fib": 0, "fibdicresidualstressanalysi": 0, "field": 0, "film": 0, "filter": 0, "final": 0, "find": 0, "fine": 0, "fingerprint": 0, "first": 0, "fit": 0, "fix": 0, "fixtur": 0, "flaw": 0, "flexibl": 0, "flexur": 0, "flow": 0, "fluctuat": 0, "fluoresc": 0, "focu": 0, "focus": 0, "follow": 0, "food": 0, "forc": 0, "form": 0, "formal": 0, "formalis": 0, "format": 0, "forquant": 0, "forward": 0, "fourier": 0, "fractur": 0, "freez": 0, "frequenc": 0, "frequent": 0, "friction": 0, "from": 0, "frommeasur": 0, "ftir": 0, "full": 0, "function": 0, "functionalicon": 0, "fundament": 0, "further": 0, "g": 0, "ga": 0, "gadget": 0, "gain": 0, "galvanostat": 0, "gamma": 0, "gase": 0, "gaseou": 0, "gather": 0, "gaug": 0, "gener": 0, "geochem": 0, "geometri": 0, "geophys": 0, "get": 0, "gitt": 0, "give": 0, "given": 0, "glass": 0, "glassi": 0, "go": 0, "goal": 0, "goldbook": 0, "good": 0, "govern": 0, "grain": 0, "graph\u014d": 0, "gravimetr": 0, "greater": 0, "greatli": 0, "greek": 0, "grid": 0, "group": 0, "grow": 0, "growth": 0, "guid": 0, "ha": 0, "half": 0, "hand": 0, "hard": 0, "harden": 0, "harder": 0, "hardwar": 0, "harmon": 0, "hasag": 0, "hasbegincharacterizationtask": 0, "hasbegintask": 0, "hascharacterizationcompon": 0, "hascharacterizationenviron": 0, "hascharacterizationenvironmentproperti": 0, "hascharacterizationinput": 0, "hascharacterizationmeasurementinstru": 0, "hascharacterizationoutput": 0, "hascharacterizationproperti": 0, "hascharacterizationsoftwar": 0, "hascharacterizationtask": 0, "hascompon": 0, "hasconstitu": 0, "hasconvent": 0, "hasendcharacterizationtask": 0, "hasendtask": 0, "hasholisticpart": 0, "hasinput": 0, "hasmeasuredproperti": 0, "hasoutput": 0, "hasparticip": 0, "hasproperti": 0, "hassampleforprepar": 0, "hassign": 0, "hastask": 0, "hastemporaryparticip": 0, "have": 0, "health": 0, "heat": 0, "height": 0, "henc": 0, "heyrovsk\u00fd": 0, "hi": 0, "high": 0, "higher": 0, "highest": 0, "highli": 0, "histor": 0, "hit": 0, "hmde": 0, "holisticsystem": 0, "homogen": 0, "hour": 0, "how": 0, "howev": 0, "http": 0, "human": 0, "humid": 0, "hv": 0, "hybridpulsepowercharacter": 0, "hybridpulsepowercharacteris": 0, "hydrodynam": 0, "hydrodynamic_voltammetri": 0, "hz": 0, "i": 0, "ident": 0, "identif": 0, "identifi": 0, "iev": 0, "ievref": 0, "ievrefer": 0, "ii": 0, "iii": 0, "ilkovich": 0, "illumin": 0, "im": 0, "imag": 0, "imc": 0, "impact": 0, "imped": 0, "impedimetr": 0, "impli": 0, "import": 0, "impos": 0, "improv": 0, "impur": 0, "incid": 0, "includ": 0, "incorpor": 0, "increas": 0, "increment": 0, "indent": 0, "independ": 0, "index": 0, "indi": 0, "indic": 0, "indicationnot": 0, "indirectli": 0, "indium": 0, "individu": 0, "induc": 0, "induct": 0, "industri": 0, "inelast": 0, "inert": 0, "infiltr": 0, "infinit": 0, "inflect": 0, "influenc": 0, "influenti": 0, "inform": 0, "informationnot": 0, "infrar": 0, "inher": 0, "inhous": 0, "initi": 0, "input": 0, "inspect": 0, "inspectioncalibrationmicroscopyviscometrydata": 0, "instead": 0, "instrument": 0, "integr": 0, "intend": 0, "intens": 0, "intentionalag": 0, "interact": 0, "interatom": 0, "interchang": 0, "interest": 0, "intermittentcurrentinterruptionmethod": 0, "intern": 0, "interpret": 0, "interrupt": 0, "intersect": 0, "interv": 0, "intramolecular": 0, "introduc": 0, "intrus": 0, "invers": 0, "investig": 0, "involv": 0, "ion": 0, "ion_chromatographi": 0, "ionic": 0, "ioniz": 0, "iri": 0, "iso": 0, "iso17025": 0, "isotherm": 0, "isotrop": 0, "isth": 0, "its": 0, "itself": 0, "iu": 0, "iupac": 0, "iupacrefer": 0, "j": 0, "jaroslav": 0, "judici": 0, "just": 0, "kelvin": 0, "kept": 0, "kev": 0, "kg": 0, "khz": 0, "kikuchi": 0, "kind": 0, "kindsnot": 0, "kinet": 0, "kinteic": 0, "knocker": 0, "known": 0, "kv": 0, "l": 0, "label": 0, "labil": 0, "lag": 0, "larg": 0, "larger": 0, "laser": 0, "later": 0, "latin": 0, "lattic": 0, "law": 0, "layer": 0, "lead": 0, "least": 0, "leav": 0, "len": 0, "length": 0, "less": 0, "level": 0, "levich": 0, "librium": 0, "life": 0, "ligand": 0, "light": 0, "like": 0, "limit": 0, "limt": 0, "line": 0, "linear": 0, "linear_sweep_voltammetri": 0, "linearli": 0, "linearpolar": 0, "linearsweepvoltammetri": 0, "liquid": 0, "load": 0, "local": 0, "locat": 0, "logarithm": 0, "logic": 0, "long": 0, "lose": 0, "low": 0, "lower": 0, "lscm": 0, "lsv": 0, "m": 0, "machin": 0, "macroscop": 0, "made": 0, "magnet": 0, "magnif": 0, "magnifi": 0, "magnitud": 0, "mai": 0, "main": 0, "mainli": 0, "maintain": 0, "major": 0, "make": 0, "manag": 0, "mani": 0, "manifest": 0, "manipul": 0, "manner": 0, "manual": 0, "manufactur": 0, "map": 0, "mass": 0, "match": 0, "materi": 0, "mathemat": 0, "mathematicalmodel": 0, "matric": 0, "matter": 0, "maximum": 0, "mean": 0, "meaning": 0, "meas": 0, "measuer": 0, "measur": 0, "measurand": 0, "measurednot": 0, "measuredproperti": 0, "measuredquantityproperti": 0, "measurementcondit": 0, "measurementresult": 0, "measurementstandard": 0, "measuringinstru": 0, "measuringsystem": 0, "mechan": 0, "mechani": 0, "mechanical_test": 0, "medic": 0, "medium": 0, "melt": 0, "membran": 0, "mention": 0, "mercuri": 0, "met": 0, "metal": 0, "metallurgi": 0, "meter": 0, "method": 0, "metrolog": 0, "metrologi": 0, "metron": 0, "mfe": 0, "mhz": 0, "micro": 0, "microanalysi": 0, "microbal": 0, "microcalorimetri": 0, "micrograph": 0, "micromet": 0, "microscal": 0, "microscop": 0, "microstructur": 0, "microwav": 0, "might": 0, "militari": 0, "mill": 0, "millimet": 0, "million": 0, "misorient": 0, "mistakenli": 0, "mixtur": 0, "ml": 0, "mn": 0, "mobil": 0, "mode": 0, "model": 0, "modern": 0, "modifi": 0, "modulu": 0, "moistur": 0, "mol": 0, "mole": 0, "molecul": 0, "molecular": 0, "moment": 0, "moni": 0, "monitor": 0, "mono": 0, "monochrom": 0, "monochromat": 0, "monochromatis": 0, "monomolecular": 0, "more": 0, "moreov": 0, "morpholog": 0, "morphologi": 0, "most": 0, "motion": 0, "mount": 0, "move": 0, "movement": 0, "mr": 0, "much": 0, "multi": 0, "multipl": 0, "must": 0, "mv": 0, "mw": 0, "n": 0, "name": 0, "nanc": 0, "nanomet": 0, "nanoparticl": 0, "nanoscal": 0, "nanosecond": 0, "nanostructur": 0, "narrow": 0, "nation": 0, "natur": 0, "nearli": 0, "necessari": 0, "need": 0, "neg": 0, "neglig": 0, "neighbour": 0, "nernst": 0, "net": 0, "neutron": 0, "nevertheless": 0, "nitrogen": 0, "nize": 0, "nm": 0, "nmr": 0, "nois": 0, "nomin": 0, "nominalproperti": 0, "non": 0, "nor": 0, "normal": 0, "notch": 0, "note": 0, "notion": 0, "now": 0, "npv": 0, "nse": 0, "nsf": 0, "nuclear": 0, "nuclei": 0, "nuclid": 0, "number": 0, "numer": 0, "nyquist": 0, "obei": 0, "objectproperti": 0, "observ": 0, "obtain": 0, "occasion": 0, "occur": 0, "oceanographi": 0, "ocvhold": 0, "offer": 0, "offset": 0, "often": 0, "oldest": 0, "oliv": 0, "onc": 0, "one": 0, "onli": 0, "onset": 0, "onto": 0, "open": 0, "openform": 0, "optic": 0, "option": 0, "order": 0, "org": 0, "organ": 0, "orient": 0, "origin": 0, "osm": 0, "osmol": 0, "osmot": 0, "osteryoungsquarewavevoltammetri": 0, "oswv": 0, "other": 0, "out": 0, "outcom": 0, "output": 0, "outsid": 0, "over": 0, "overal": 0, "oxi": 0, "oxid": 0, "pac": 0, "page": 0, "palm": 0, "paramet": 0, "parent": 0, "part": 0, "parti": 0, "partial": 0, "particl": 0, "pass": 0, "past": 0, "pathlength": 0, "pattern": 0, "pc": 0, "pea": 0, "peak": 0, "penetr": 0, "per": 0, "percent": 0, "perform": 0, "period": 0, "perman": 0, "permiss": 0, "permit": 0, "person": 0, "perturb": 0, "pharr": 0, "phase": 0, "phenomena": 0, "phonon": 0, "phosphor": 0, "phosphoresc": 0, "photoabsorpt": 0, "photoelectr": 0, "photoelectron": 0, "photograph": 0, "photoluminesc": 0, "photometri": 0, "photon": 0, "physic": 0, "physicist": 0, "physicsequ": 0, "pinhol": 0, "pipework": 0, "place": 0, "plane": 0, "plasma": 0, "plastic": 0, "platen": 0, "plot": 0, "plu": 0, "point": 0, "point_flexural_test": 0, "poisson": 0, "polar": 0, "polaris": 0, "polarogram": 0, "polarograph": 0, "polarographi": 0, "polish": 0, "polyethylen": 0, "polym": 0, "polymer": 0, "popul": 0, "pore": 0, "poros": 0, "porou": 0, "portabl": 0, "portion": 0, "posit": 0, "possess": 0, "possibl": 0, "possibli": 0, "post": 0, "potenti": 0, "potentiogram": 0, "potentiometr": 0, "powder": 0, "powder_diffract": 0, "power": 0, "practic": 0, "pre": 0, "precess": 0, "precipit": 0, "precis": 0, "preclud": 0, "preflabel": 0, "prepar": 0, "preparationsampl": 0, "prerequisit": 0, "prerequisitefor": 0, "prescrib": 0, "preselect": 0, "presenc": 0, "present": 0, "preset": 0, "pressur": 0, "previou": 0, "primari": 0, "principl": 0, "problem": 0, "procedur": 0, "process": 0, "produc": 0, "product": 0, "profil": 0, "program": 0, "programm": 0, "progress": 0, "project": 0, "prolong": 0, "propag": 0, "proper": 0, "properli": 0, "propertyvalu": 0, "propor": 0, "proport": 0, "propos": 0, "protocol": 0, "provid": 0, "psa": 0, "psd": 0, "pseudo": 0, "pseudoocv": 0, "puls": 0, "pure": 0, "puriti": 0, "purpos": 0, "q": 0, "q1136979": 0, "q1147647": 0, "q11778221": 0, "q120895154": 0, "q120906986": 0, "q12101244": 0, "q17028237": 0, "q2300905": 0, "q3492904": 0, "q386334": 0, "q4016323": 0, "q4016325": 0, "q5275361": 0, "q620700": 0, "q795838": 0, "q900632": 0, "q901180": 0, "q901559": 0, "q902953": 0, "q904093": 0, "q939328": 0, "qel": 0, "qt": 0, "qualifi": 0, "qualit": 0, "qualiti": 0, "qualitycontrol": 0, "quantif": 0, "quantifi": 0, "quantit": 0, "quantiti": 0, "quantum": 0, "quartz": 0, "quasi": 0, "quasistat": 0, "quot": 0, "radiat": 0, "radio": 0, "radioact": 0, "radiologi": 0, "radiometr": 0, "radionuclid": 0, "radiu": 0, "rai": 0, "raman": 0, "ramp": 0, "randl": 0, "randomli": 0, "rang": 0, "rate": 0, "ratio": 0, "raw": 0, "ray_crystallographi": 0, "ray_spectroscopi": 0, "rayleigh": 0, "reach": 0, "react": 0, "reaction": 0, "reactiv": 0, "reagent": 0, "real": 0, "realiti": 0, "rearrang": 0, "reason": 0, "recalibr": 0, "receiv": 0, "record": 0, "redox": 0, "reduc": 0, "reduct": 0, "referencemateri": 0, "referencespecimen": 0, "reflect": 0, "refract": 0, "region": 0, "regular": 0, "rel": 0, "relat": 0, "relationship": 0, "relev": 0, "reli": 0, "remco": 0, "remov": 0, "reorient": 0, "repeat": 0, "replac": 0, "replic": 0, "repres": 0, "represent": 0, "reproduc": 0, "requir": 0, "research": 0, "residu": 0, "resist": 0, "reso": 0, "resolut": 0, "resolv": 0, "reson": 0, "respect": 0, "respond": 0, "respons": 0, "rest": 0, "restrict": 0, "result": 0, "reveal": 0, "revers": 0, "rigid": 0, "ring": 0, "robust": 0, "root": 0, "rotat": 0, "rough": 0, "roughli": 0, "routin": 0, "rule": 0, "run": 0, "s05661": 0, "s10832": 0, "sacrif": 0, "safeti": 0, "salt": 0, "same": 0, "sauerbrei": 0, "scale": 0, "scan": 0, "scatter": 0, "scienc": 0, "scientif": 0, "scintil": 0, "scope": 0, "scratch": 0, "screen": 0, "se": 0, "second": 0, "secondari": 0, "section": 0, "sector": 0, "secur": 0, "see": 0, "selec": 0, "select": 0, "selfcalibr": 0, "sem": 0, "semiconductor": 0, "semiperm": 0, "sensi": 0, "sensit": 0, "sensor": 0, "sent": 0, "sepa": 0, "separ": 0, "sequenc": 0, "seri": 0, "serum": 0, "servic": 0, "set": 0, "sever": 0, "shape": 0, "sharp": 0, "shift": 0, "short": 0, "should": 0, "show": 0, "si": 0, "sigmoid": 0, "significantli": 0, "sim": 0, "similar": 0, "simpl": 0, "simplest": 0, "simpli": 0, "sinc": 0, "singl": 0, "sinusoid": 0, "site": 0, "size": 0, "skb": 0, "skp": 0, "skpfm": 0, "slice": 0, "slide": 0, "slow": 0, "slowli": 0, "small": 0, "smaller": 0, "snell": 0, "so": 0, "softwar": 0, "solicit": 0, "solid": 0, "solut": 0, "solvent": 0, "some": 0, "someon": 0, "sometim": 0, "sourc": 0, "space": 0, "span": 0, "spatial": 0, "speci": 0, "special": 0, "specialis": 0, "speciat": 0, "specif": 0, "specifi": 0, "specim": 0, "specimen": 0, "spectra": 0, "spectral": 0, "spectromet": 0, "spectroscop": 0, "spectrum": 0, "sphere": 0, "spin": 0, "spm": 0, "spot": 0, "sputter": 0, "squar": 0, "squarewave_voltammetri": 0, "stabl": 0, "stage": 0, "staircas": 0, "stand": 0, "standard": 0, "standardi": 0, "start": 0, "state": 0, "statement": 0, "static": 0, "statist": 0, "steadi": 0, "steel": 0, "stem": 0, "step": 0, "stiff": 0, "stir": 0, "stm": 0, "stoichiometr": 0, "stoke": 0, "stop": 0, "store": 0, "strain": 0, "strength": 0, "stress": 0, "string": 0, "strip": 0, "structur": 0, "studi": 0, "sub": 0, "subclass": 0, "subject": 0, "sublim": 0, "subsequ": 0, "subset": 0, "substanc": 0, "subtract": 0, "success": 0, "successfulli": 0, "suffici": 0, "suit": 0, "superimpos": 0, "supplementarydevicesnot": 0, "suppli": 0, "support": 0, "surfac": 0, "surround": 0, "suscept": 0, "suspens": 0, "switch": 0, "swv": 0, "synchro": 0, "synchron": 0, "synonym": 0, "system": 0, "t": 0, "t0": 0, "tabl": 0, "take": 0, "taken": 0, "target": 0, "task": 0, "tastpolarographi": 0, "techniqu": 0, "techniquecan": 0, "technologi": 0, "tem": 0, "temperatur": 0, "tempor": 0, "ten": 0, "tend": 0, "tensil": 0, "tension": 0, "tensiontest": 0, "term": 0, "terminologi": 0, "test": 0, "textur": 0, "tga": 0, "than": 0, "thei": 0, "thelatt": 0, "thelight": 0, "them": 0, "themeasur": 0, "theori": 0, "thepast": 0, "theprocess": 0, "thequant": 0, "thermal": 0, "thermoanalyt": 0, "thermodynam": 0, "thermogram": 0, "thermogravimetr": 0, "thermomechan": 0, "thi": 0, "thick": 0, "thin": 0, "thing": 0, "thinner": 0, "those": 0, "though": 0, "three": 0, "threepointflexuraltest": 0, "through": 0, "throughout": 0, "thu": 0, "tilt": 0, "time": 0, "tin": 0, "tion": 0, "tional": 0, "tip": 0, "titrant": 0, "titrat": 0, "tive": 0, "tiviti": 0, "tma": 0, "togeth": 0, "tomo": 0, "tomogram": 0, "tomograph": 0, "too": 0, "tool": 0, "topdataproperti": 0, "topobjectproperti": 0, "topograph": 0, "topographi": 0, "total": 0, "toward": 0, "towhich": 0, "toxic": 0, "trace": 0, "traceabl": 0, "tran": 0, "transfer": 0, "transform": 0, "transform_infrared_spectroscopi": 0, "transient": 0, "transit": 0, "transmiss": 0, "transmit": 0, "transport": 0, "travel": 0, "tribolog": 0, "tube": 0, "tune": 0, "tunnel": 0, "turbid": 0, "twice": 0, "two": 0, "type": 0, "typic": 0, "u": 0, "ubbelohd": 0, "ultim": 0, "ultra": 0, "ultrason": 0, "ultrathin": 0, "ultraviolet": 0, "uncertainti": 0, "uncertaintyfor": 0, "uncoat": 0, "under": 0, "undergo": 0, "underli": 0, "understand": 0, "undetect": 0, "uniaxi": 0, "uniform": 0, "uniqu": 0, "uniqueid": 0, "unit": 0, "unknown": 0, "unprocess": 0, "until": 0, "up": 0, "upac": 0, "upon": 0, "us": 0, "usag": 0, "useabl": 0, "user": 0, "usercasehascharacterizationprocedur": 0, "usual": 0, "ut": 0, "v": 0, "vaccin": 0, "vacuum": 0, "valid": 0, "valu": 0, "valuabl": 0, "vapor": 0, "vari": 0, "variabl": 0, "variant": 0, "variat": 0, "varieti": 0, "variou": 0, "veri": 0, "verif": 0, "version": 0, "versu": 0, "via": 0, "vibrat": 0, "view": 0, "vim": 0, "vimterm": 0, "virtual": 0, "viscomet": 0, "viscos": 0, "visibl": 0, "visual": 0, "vital": 0, "voc": 0, "vocabulari": 0, "volatil": 0, "volta": 0, "voltag": 0, "voltammetr": 0, "voltammogram": 0, "volum": 0, "volumetr": 0, "vpo": 0, "v\u03b4": 0, "w3id": 0, "wa": 0, "wai": 0, "water": 0, "wave": 0, "waveform": 0, "wavelength": 0, "wd": 0, "weak": 0, "wear": 0, "weight": 0, "well": 0, "welldefin": 0, "were": 0, "wet": 0, "what": 0, "whatev": 0, "when": 0, "whenev": 0, "where": 0, "wherea": 0, "which": 0, "while": 0, "whilst": 0, "who": 0, "whole": 0, "why": 0, "wide": 0, "width": 0, "wiki": 0, "wikidata": 0, "wikidatarefer": 0, "wikipedia": 0, "wikipediarefer": 0, "within": 0, "without": 0, "wood": 0, "word": 0, "work": 0, "workflow": 0, "world": 0, "would": 0, "write": 0, "www": 0, "x": 0, "x27": 0, "xa": 0, "xane": 0, "xp": 0, "xrd": 0, "xrpd": 0, "y": 0, "yet": 0, "yield": 0, "you": 0, "young": 0, "your": 0, "zation": 0, "zero": 0, "\u0161ev\u010d\u00edk": 0, "\u02c8r\u0251\u02d0m\u0259n": 0, "\u03b3\u03c1\u03ac\u03c6\u03c9": 0, "\u03b4": 0, "\u03b7": 0, "\u03b70": 0, "\u03bcj": 0, "\u03bcw": 0, "\u03bc\u03ad\u03c4\u03c1\u03bf\u03bd": 0, "\u03c4\u03cc\u03bc\u03bf\u03c2": 0, "\u03c6": 0}, "titles": ["References", "<no title>"], "titleterms": {"abrasivestrippingvoltammetri": 0, "accesscondit": 0, "acvoltammetri": 0, "adsorptivestrippingvoltammetri": 0, "alphaspectrometri": 0, "amperometri": 0, "analyticalelectronmicroscopi": 0, "anodicstrippingvoltammetri": 0, "atomicforcemicroscopi": 0, "atomprobetomographi": 0, "brunaueremmetttellermethod": 0, "calibrationdata": 0, "calibrationdatapostprocess": 0, "calibrationprocess": 0, "calibrationtask": 0, "calorimetri": 0, "cathodicstrippingvoltammetri": 0, "characteris": 0, "characterisationcompon": 0, "characterisationdata": 0, "characterisationdatavalid": 0, "characterisationenviron": 0, "characterisationenvironmentproperti": 0, "characterisationexperi": 0, "characterisationhardwar": 0, "characterisationhardwarespecif": 0, "characterisationmeasurementinstru": 0, "characterisationmeasurementprocess": 0, "characterisationmeasurementtask": 0, "characterisationprocedur": 0, "characterisationprocedurevalid": 0, "characterisationproperti": 0, "characterisationprotocol": 0, "characterisationsoftwar": 0, "characterisationsystem": 0, "characterisationtask": 0, "characterisationtechniqu": 0, "characterisationworkflow": 0, "characterisedsampl": 0, "chargedistribut": 0, "chromatographi": 0, "chronoamperometri": 0, "chronocoulometri": 0, "chronopotentiometri": 0, "class": 0, "compressiontest": 0, "conductometri": 0, "conductometrictitr": 0, "confocalmicroscopi": 0, "coulometri": 0, "coulometrictitr": 0, "creeptest": 0, "criticalandsupercriticalchromatographi": 0, "cyclicchronopotentiometri": 0, "cyclicvoltammetri": 0, "dataacquisitionr": 0, "dataanalysi": 0, "datafilt": 0, "datanormalis": 0, "datapostprocess": 0, "dataprepar": 0, "dataprocessingthroughcalibr": 0, "dataqu": 0, "dcpolarographi": 0, "detector": 0, "dielectricandimpedancespectroscopi": 0, "dielectrometri": 0, "differentiallinearpulsevoltammetri": 0, "differentialpulsevoltammetri": 0, "differentialrefractiveindex": 0, "differentialscanningcalorimetri": 0, "differentialstaircasepulsevoltammetri": 0, "differentialthermalanalysi": 0, "dilatometri": 0, "directcoulometryatcontrolledcurr": 0, "directcoulometryatcontrolledpotenti": 0, "directcurrentinternalresist": 0, "dynamiclightscatt": 0, "dynamicmechanicalanalysi": 0, "dynamicmechanicalspectroscopi": 0, "electrochemicalimpedancespectroscopi": 0, "electrochemicalpiezoelectricmicrogravimetri": 0, "electrochemicaltest": 0, "electrogravimetri": 0, "electronbackscatterdiffract": 0, "electronprobemicroanalysi": 0, "ellipsometri": 0, "energydispersivexrayspectroscopi": 0, "environmentalscanningelectronmicroscopi": 0, "exaf": 0, "fatiguetest": 0, "fibdic": 0, "fieldemissionscanningelectronmicroscopi": 0, "fouriertransforminfraredspectroscopi": 0, "fractographi": 0, "freezingpointdepressionosmometri": 0, "galvanostaticintermittenttitrationtechniqu": 0, "gammaspectrometri": 0, "gasadsorptionporosimetri": 0, "hardnesstest": 0, "hardwaremanufactur": 0, "hardwaremodel": 0, "hasaccesscondit": 0, "hasbegincharacterisationtask": 0, "hascharacterisationcompon": 0, "hascharacterisationenviron": 0, "hascharacterisationenvironmentproperti": 0, "hascharacterisationinput": 0, "hascharacterisationmeasurementinstru": 0, "hascharacterisationoutput": 0, "hascharacterisationprocedurevalid": 0, "hascharacterisationproperti": 0, "hascharacterisationsoftwar": 0, "hascharacterisationtask": 0, "hasdataacquisitionr": 0, "hasdataprocessingthroughcalibr": 0, "hasdataqu": 0, "hasdataset": 0, "hasdateofcalibr": 0, "hasendcharacterisationtask": 0, "hashardwarespecif": 0, "hashazard": 0, "hashold": 0, "hasinstrumentforcalibr": 0, "hasinteractionvolum": 0, "hasinteractionwithprob": 0, "hasinteractionwithsampl": 0, "haslab": 0, "haslevelofautom": 0, "hasmanufactur": 0, "hasmeasurementdetector": 0, "hasmeasurementparamet": 0, "hasmeasurementprob": 0, "hasmeasurementsampl": 0, "hasmeasurementtim": 0, "hasmodel": 0, "hasoper": 0, "haspeerreviewedarticl": 0, "hasphysicsofinteract": 0, "haspostprocessingmodel": 0, "hasprocessingreproduc": 0, "hasreferencesampl": 0, "hassamplebeforesampleprepar": 0, "hassampledsampl": 0, "hassampleforinspect": 0, "hassampleinspectioninstru": 0, "hassampleinspectionparamet": 0, "hassamplepreparationinstru": 0, "hassamplepreparationparamet": 0, "hasuniqueid": 0, "hazard": 0, "holder": 0, "hppc": 0, "hydrodynamicvoltammetri": 0, "ici": 0, "impedimetri": 0, "interactionvolum": 0, "intermediatesampl": 0, "ionchromatographi": 0, "ionmobilityspectrometri": 0, "isothermalmicrocalorimetri": 0, "laboratori": 0, "levelofautom": 0, "levelofexpertis": 0, "lightscatt": 0, "linearchronopotentiometri": 0, "linearscanvoltammetri": 0, "massspectrometri": 0, "measurementdatapostprocess": 0, "measurementparamet": 0, "measurementsystemadjust": 0, "measurementtim": 0, "mechanicaltest": 0, "membraneosmometri": 0, "mercuryporosimetri": 0, "methodologi": 0, "microscopi": 0, "modul": 0, "nanoindent": 0, "neutronspinechospectroscopi": 0, "nexaf": 0, "normalpulsevoltammetri": 0, "nuclearmagneticreson": 0, "object": 0, "ontologi": 0, "opencircuithold": 0, "oper": 0, "opticalmicroscopi": 0, "opticaltest": 0, "osmometri": 0, "photoluminescencemicroscopi": 0, "physicsofinteract": 0, "porosimetri": 0, "postprocessingmodel": 0, "potentiometri": 0, "potentiometricstrippinganalysi": 0, "preparedsampl": 0, "primarydata": 0, "probe": 0, "probesampleinteract": 0, "processingreproduc": 0, "profilometri": 0, "properti": 0, "pseudoopencircuitvoltagemethod": 0, "pulsedelectroacousticmethod": 0, "ramanspectroscopi": 0, "rational": 0, "rawdata": 0, "rawsampl": 0, "refer": 0, "referencesampl": 0, "requireslevelofexpertis": 0, "sampl": 0, "sampleddcpolarographi": 0, "sampleinspect": 0, "sampleinspectioninstru": 0, "sampleinspectionparamet": 0, "sampleprepar": 0, "samplepreparationinstru": 0, "samplepreparationparamet": 0, "samplingprocess": 0, "scanningaugerelectronmicroscopi": 0, "scanningelectronmicroscopi": 0, "scanningkelvinprob": 0, "scanningprobemicroscopi": 0, "scanningtunnelingmicroscopi": 0, "scatteringanddiffract": 0, "secondarydata": 0, "secondaryionmassspectrometri": 0, "shearortorsiontest": 0, "signal": 0, "spectrometri": 0, "spectroscopi": 0, "squarewavevoltammetri": 0, "stepchronopotentiometri": 0, "strippingvoltammetri": 0, "synchrotron": 0, "tensiletest": 0, "thermochemicaltest": 0, "thermogravimetri": 0, "threepointbendingtest": 0, "tomographi": 0, "transmissionelectronmicroscopi": 0, "ultrasonictest": 0, "usercas": 0, "usercasehascharacterisationprocedur": 0, "vaporpressuredepressionosmometri": 0, "viscometri": 0, "voltammetri": 0, "voltammetryatarotatingdiskelectrod": 0, "weartest": 0, "xpsvariablekinet": 0, "xraydiffract": 0, "xraypowderdiffract": 0, "xrdgrazingincid": 0}}) \ No newline at end of file
Irihttps://w3id.org/emmo/domain/characterisation-methodology/chameo#NormalPulseVoltammetryIrihttps://w3id.org/emmo/domain/characterisation-methodology/chameo#NormalPulseVoltammetry
Annotations
PreflabelNormalPulseVoltammetry
AltlabelNPV
AnnotationsElucidationvoltammetry in which potential pulses of amplitude increasing by a constant increment and with a pulse width of 2 to 200 ms are superimposed on a constant initial potential
Comment
PreflabelNormalPulseVoltammetry
Elucidationvoltammetry in which potential pulses of amplitude increasing by a constant increment and with a pulse width of 2 to 200 ms are superimposed on a constant initial potential
AltlabelNPV
Iupacreference https://doi.org/10.1515/pac-2018-0109
CommentNuclear magnetic resonance spectroscopy, most commonly known as NMR spectroscopy or magnetic resonance spectroscopy (MRS), is a spectroscopic technique to observe local magnetic fields around atomic nuclei. This spectroscopy is based on the measurement of absorption of electromagnetic radiations in the radio frequency region from roughly 4 to 900 MHz. Absorption of radio waves in the presence of magnetic field is accompanied by a special type of nuclear transition, and for this reason, such type of spectroscopy is known as Nuclear Magnetic Resonance Spectroscopy. The sample is placed in a magnetic field and the NMR signal is produced by excitation of the nuclei sample with radio waves into nuclear magnetic resonance, which is detected with sensitive radio receivers. The intramolecular magnetic field around an atom in a molecule changes the resonance frequency, thus giving access to details of the electronic structure of a molecule and its individual functional groups. As the fields are unique or highly characteristic to individual compounds, in modern organic chemistry practice, NMR spectroscopy is the definitive method to identify monomolecular organic compounds.PreflabelNuclearMagneticResonance
CommentAltlabelMagnetic resonance spectroscopy (MRS)
PreflabelNuclearMagneticResonanceAltlabelNMR
Elucidation Nuclear magnetic resonance spectroscopy, most commonly known as NMR spectroscopy or magnetic resonance spectroscopy (MRS), is a spectroscopic technique to observe local magnetic fields around atomic nuclei. This spectroscopy is based on the measurement of absorption of electromagnetic radiations in the radio frequency region from roughly 4 to 900 MHz. Absorption of radio waves in the presence of magnetic field is accompanied by a special type of nuclear transition, and for this reason, such type of spectroscopy is known as Nuclear Magnetic Resonance Spectroscopy. The sample is placed in a magnetic field and the NMR signal is produced by excitation of the nuclei sample with radio waves into nuclear magnetic resonance, which is detected with sensitive radio receivers. The intramolecular magnetic field around an atom in a molecule changes the resonance frequency, thus giving access to details of the electronic structure of a molecule and its individual functional groups. As the fields are unique or highly characteristic to individual compounds, in modern organic chemistry practice, NMR spectroscopy is the definitive method to identify monomolecular organic compounds.
AltlabelMagnetic resonance spectroscopy (MRS)CommentNuclear magnetic resonance spectroscopy, most commonly known as NMR spectroscopy or magnetic resonance spectroscopy (MRS), is a spectroscopic technique to observe local magnetic fields around atomic nuclei. This spectroscopy is based on the measurement of absorption of electromagnetic radiations in the radio frequency region from roughly 4 to 900 MHz. Absorption of radio waves in the presence of magnetic field is accompanied by a special type of nuclear transition, and for this reason, such type of spectroscopy is known as Nuclear Magnetic Resonance Spectroscopy. The sample is placed in a magnetic field and the NMR signal is produced by excitation of the nuclei sample with radio waves into nuclear magnetic resonance, which is detected with sensitive radio receivers. The intramolecular magnetic field around an atom in a molecule changes the resonance frequency, thus giving access to details of the electronic structure of a molecule and its individual functional groups. As the fields are unique or highly characteristic to individual compounds, in modern organic chemistry practice, NMR spectroscopy is the definitive method to identify monomolecular organic compounds.
AltlabelNMRComment
Label
Commenta process in which the electric current is kept constant at 0 (i.e., open-circuit conditions)PreflabelOpenCircuitHold
CommentAltlabelOCVHold
PreflabelOpenCircuitHoldElucidationa process in which the electric current is kept constant at 0 (i.e., open-circuit conditions)
ElucidationComment a process in which the electric current is kept constant at 0 (i.e., open-circuit conditions)
AltlabelOCVHoldComment
Label
Annotations
CommentThe human operator who takes care of the whole characterisation method or sub-processes/stages.
Comment
Preflabel OperatorElucidation The human operator who takes care of the whole characterisation method or sub-processes/stages.
CommentThe human operator who takes care of the whole characterisation method or sub-processes/stages.
Comment
Label Operator
CommentOptical microscopy is a technique used to closely view a sample through the magnification of a lens with visible light
Comment
Preflabel OpticalMicroscopyOptical microscopy is a technique used to closely view a sample through the magnification of a lens with visible light
CommentOptical microscopy is a technique used to closely view a sample through the magnification of a lens with visible light
Comment
Label OpticalMicroscopy
Comment
Preflabel OpticalTesting
Comment
Label OpticalTesting
CommentOsmometry is an advanced analytical method for determining the osmotic concentration of solutions. The osmotic – or solute – concentration of a colloidal system is expressed in osmoles (Osm) per unit of volume (Osm/L) or weight (Osm/kg).
Comment
Preflabel OsmometryOsmometry is an advanced analytical method for determining the osmotic concentration of solutions. The osmotic – or solute – concentration of a colloidal system is expressed in osmoles (Osm) per unit of volume (Osm/L) or weight (Osm/kg).
CommentOsmometry is an advanced analytical method for determining the osmotic concentration of solutions. The osmotic – or solute – concentration of a colloidal system is expressed in osmoles (Osm) per unit of volume (Osm/L) or weight (Osm/kg).
Comment
Label Osmometry
CommentPhotoluminescence spectroscopy is a widely used technique for characterisation of the optical and electronic properties of semiconductors and molecules.
Comment
Preflabel PhotoluminescenceMicroscopyPhotoluminescence spectroscopy is a widely used technique for characterisation of the optical and electronic properties of semiconductors and molecules.
CommentPhotoluminescence spectroscopy is a widely used technique for characterisation of the optical and electronic properties of semiconductors and molecules.
Comment
Label PhotoluminescenceMicroscopyAnnotations
CommentSet of physics principles (and associated governing equations) that describes the interaction between the sample and the probe.
Comment
Preflabel PhysicsOfInteractionSet of physics principles (and associated governing equations) that describes the interaction between the sample and the probe.
CommentSet of physics principles (and associated governing equations) that describes the interaction between the sample and the probe.
Comment
Example In x-ray diffraction, this is represented by the set of physics equations that describe the relation between the incident x-ray beam and the diffracted beam (the most simple form for this being the Bragg’s law).
Comment
Preflabel Porosimetry
Comment
Label Porosimetry
CommentThe PostProcessingModel use is mainly intended to get secondary data from primary data.PreflabelPostProcessingModel
CommentElucidation Mathematical model used to process data.
Mathematical model used to process data.
PreflabelPostProcessingModelCommentThe PostProcessingModel use is mainly intended to get secondary data from primary data.
ElucidationMathematical model used to process data.Comment
Label
PreflabelPotentiometricStrippingAnalysis
AltlabelPSA
Elucidationtwo-step electrochemical measurement in which 1) material is accumulated at an electrode and 2) the material is removed by chemical reaction or electrochemically at constant current with measurement of electrode potential
Comment historically for the analysis of metal ions, mercury ions were added to the test solution to form a mercury amalgam when reduced. Alternatively, an HMDE or MFE was used and the oxidizing agent added after amalgam formation. However, the toxicity of mercury and its compounds have all but precluded the present-day use of mercury
PreflabelPotentiometricStrippingAnalysis
Elucidationtwo-step electrochemical measurement in which 1) material is accumulated at an electrode and 2) the material is removed by chemical reaction or electrochemically at constant current with measurement of electrode potential
AltlabelPSA
Label PotentiometricStrippingAnalysis
PreflabelPotentiometry
ElucidationPotentiometric methods are used to measure the electrochemical potentials of a metallic structure in a given environment.
Comment For measurements using ion-selective electrodes, the measurement is made under equi- librium conditions what means that the macroscopic electric current is zero and the con- centrations of all species are uniform throughout the solution. The indicator electrode is in direct contact with the analyte solution, whereas the reference electrode is usually separated from the analyte solution by a salt bridge. The potential difference between the indicator and reference electrodes is normally directly proportional to the logarithm of the activity (concentration) of the analyte in the solution (Nernst equation). See also ion selec- tive electrode.
PreflabelPotentiometry
ElucidationPotentiometric methods are used to measure the electrochemical potentials of a metallic structure in a given environment.Wikidatareferencehttps://www.wikidata.org/wiki/Q900632
Iupacreference https://doi.org/10.1515/pac-2018-0109
Wikidatareferencehttps://www.wikidata.org/wiki/Q900632
Ievreference https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-04-12
CommentThe sample after a preparation process.
Comment
Preflabel PreparedSampleThe sample after a preparation process.
CommentThe sample after a preparation process.
Comment
Label PreparedSample
CommentData resulting of a pre-processing of raw data, applying corrections to normalize/harmonize, in order to prepare them for the post-processing.
Comment
Preflabel PrimaryDataData resulting of a pre-processing of raw data, applying corrections to normalize/harmonize, in order to prepare them for the post-processing.
CommentData resulting of a pre-processing of raw data, applying corrections to normalize/harmonize, in order to prepare them for the post-processing.
Comment
Example Baseline subtraction
Annotations
CommentProbe is the physical tool (i.e., a disturbance, primary solicitation, or a gadget), controlled over time, that generates measurable fields that interact with the sample to acquire information on the specimen’s behaviour and properties.
Comment
Preflabel ProbeElucidation Probe is the physical tool (i.e., a disturbance, primary solicitation, or a gadget), controlled over time, that generates measurable fields that interact with the sample to acquire information on the specimen’s behaviour and properties.
CommentProbe is the physical tool (i.e., a disturbance, primary solicitation, or a gadget), controlled over time, that generates measurable fields that interact with the sample to acquire information on the specimen’s behaviour and properties.
Comment
Example In dynamic light scattering, temporal fluctuations of backscattered light due to Brownian motion and flow of nanoparticles are the probe, resolved as function of pathlength in the sample. From fluctuation analysis (intensity correlations) and the wavelength of light in the medium, the (distribution of) diffusion coefficient(s) can be measured during flow. The Stokes-Einstein relation yields the particle size characteristics.Annotations
CommentProcess representing the interaction between the Probe and the Sample (with a certain Interaction Volume) which generates a Signal
Comment
Preflabel ProbeSampleInteractionProcess representing the interaction between the Probe and the Sample (with a certain Interaction Volume) which generates a Signal
CommentProcess representing the interaction between the Probe and the Sample (with a certain Interaction Volume) which generates a Signal
Comment
Label ProbeSampleInteraction
CommentDescription of performed statistical analysis to check for data reproducibility (e.g. easily reproducible for everyone, reproducible for a domain expert, reproducible only for Data processing Expert)
Comment
Preflabel ProcessingReproducibilityDescription of performed statistical analysis to check for data reproducibility (e.g. easily reproducible for everyone, reproducible for a domain expert, reproducible only for Data processing Expert)
CommentDescription of performed statistical analysis to check for data reproducibility (e.g. easily reproducible for everyone, reproducible for a domain expert, reproducible only for Data processing Expert)
Comment
Label ProcessingReproducibility
CommentProfilometry is a technique used to extract topographical data from a surface. This can be a single point, a line scan or even a full three dimensional scan. The purpose of profilometry is to get surface morphology, step heights and surface roughness.
Comment
Preflabel ProfilometryProfilometry is a technique used to extract topographical data from a surface. This can be a single point, a line scan or even a full three dimensional scan. The purpose of profilometry is to get surface morphology, step heights and surface roughness.
CommentProfilometry is a technique used to extract topographical data from a surface. This can be a single point, a line scan or even a full three dimensional scan. The purpose of profilometry is to get surface morphology, step heights and surface roughness.
Comment
Label Profilometry
Commenta technique used to measure the voltage of a cell under a low applied current as an estimate for the open-circuit voltagePreflabelPseudoOpenCircuitVoltageMethod
CommentAltlabelPseudoOCV
PreflabelPseudoOpenCircuitVoltageMethodElucidationa technique used to measure the voltage of a cell under a low applied current as an estimate for the open-circuit voltage
ElucidationComment a technique used to measure the voltage of a cell under a low applied current as an estimate for the open-circuit voltage
AltlabelPseudoOCVComment
Label
CommentThe pulsed electroacoustic (PEA) method is an established method for space charge measurements in polymeric dielectrics.
Comment
Preflabel PulsedElectroacousticMethodThe pulsed electroacoustic (PEA) method is an established method for space charge measurements in polymeric dielectrics.
CommentThe pulsed electroacoustic (PEA) method is an established method for space charge measurements in polymeric dielectrics.
Comment
Iupacreference https://doi.org/10.1007/s10832-023-00332-y
CommentRaman spectroscopy (/ˈrɑːmən/) (named after physicist C. V. Raman) is a spectroscopic technique typically used to determine vibrational modes of molecules, although rotational and other low-frequency modes of systems may also be observed. Raman spectroscopy is commonly used in chemistry to provide a structural fingerprint by which molecules can be identified.

Raman spectroscopy relies upon inelastic scattering of photons, known as Raman scattering. A source of monochromatic light, usually from a laser in the visible, near infrared, or near ultraviolet range is used, although X-rays can also be used. The laser light interacts with molecular vibrations, phonons or other excitations in the system, resulting in the energy of the laser photons being shifted up or down. The shift in energy gives information about the vibrational modes in the system. Infrared spectroscopy typically yields similar yet complementary information.

Typically, a sample is illuminated with a laser beam. Electromagnetic radiation from the illuminated spot is collected with a lens and sent through a monochromator. Elastic scattered radiation at the wavelength corresponding to the laser line (Rayleigh scattering) is filtered out by either a notch filter, edge pass filter, or a band pass filter, while the rest of the collected light is dispersed onto a detector.
Comment
Preflabel RamanSpectroscopyRaman spectroscopy (/ˈrɑːmən/) (named after physicist C. V. Raman) is a spectroscopic technique typically used to determine vibrational modes of molecules, although rotational and other low-frequency modes of systems may also be observed. Raman spectroscopy is commonly used in chemistry to provide a structural fingerprint by which molecules can be identified.

Raman spectroscopy relies upon inelastic scattering of photons, known as Raman scattering. A source of monochromatic light, usually from a laser in the visible, near infrared, or near ultraviolet range is used, although X-rays can also be used. The laser light interacts with molecular vibrations, phonons or other excitations in the system, resulting in the energy of the laser photons being shifted up or down. The shift in energy gives information about the vibrational modes in the system. Infrared spectroscopy typically yields similar yet complementary information.

Typically, a sample is illuminated with a laser beam. Electromagnetic radiation from the illuminated spot is collected with a lens and sent through a monochromator. Elastic scattered radiation at the wavelength corresponding to the laser line (Rayleigh scattering) is filtered out by either a notch filter, edge pass filter, or a band pass filter, while the rest of the collected light is dispersed onto a detector.
CommentRaman spectroscopy (/ˈrɑːmən/) (named after physicist C. V. Raman) is a spectroscopic technique typically used to determine vibrational modes of molecules, although rotational and other low-frequency modes of systems may also be observed. Raman spectroscopy is commonly used in chemistry to provide a structural fingerprint by which molecules can be identified.

Raman spectroscopy relies upon inelastic scattering of photons, known as Raman scattering. A source of monochromatic light, usually from a laser in the visible, near infrared, or near ultraviolet range is used, although X-rays can also be used. The laser light interacts with molecular vibrations, phonons or other excitations in the system, resulting in the energy of the laser photons being shifted up or down. The shift in energy gives information about the vibrational modes in the system. Infrared spectroscopy typically yields similar yet complementary information.

Typically, a sample is illuminated with a laser beam. Electromagnetic radiation from the illuminated spot is collected with a lens and sent through a monochromator. Elastic scattered radiation at the wavelength corresponding to the laser line (Rayleigh scattering) is filtered out by either a notch filter, edge pass filter, or a band pass filter, while the rest of the collected light is dispersed onto a detector.
Comment
Label RamanSpectroscopy
CommentA set of reasons or a logical basis for a decision or belief
Preflabel RationaleA set of reasons or a logical basis for a decision or belief
CommentA set of reasons or a logical basis for a decision or belief
Label RationaleAnnotations
CommentIn some cases, raw data can be considered to have already some level of data processing, e.g., in electron microscopy a “raw image” that is formed on the screen is already result from multiple processing after the signal is acquired by the detector.PreflabelRawData
CommentElucidation Direct output of the equipment with the manufacturer’s software including automatic pre-processing that is not modified by the user once the acquisition method is defined and the equipment calibrated.
CommentIn some cases, raw data can be considered to have already some level of data processing, e.g., in electron microscopy a “raw image” that is formed on the screen is already result from multiple processing after the signal is acquired by the detector.ElucidationThe raw data is a set of (unprocessed) data that is given directly as output from the detector, usually expressed as a function of time or position, or photon energy.
CommentIn some cases, raw data can be considered to have already some level of data processing, e.g., in electron microscopy a “raw image” that is formed on the screen is already result from multiple processing after the signal is acquired by the detector.
PreflabelRawDataCommentDirect output of the equipment with the manufacturer’s software including automatic pre-processing that is not modified by the user once the acquisition method is defined and the equipment calibrated.
ElucidationDirect output of the equipment with the manufacturer’s software including automatic pre-processing that is not modified by the user once the acquisition method is defined and the equipment calibrated.CommentIn some cases, raw data can be considered to have already some level of data processing, e.g., in electron microscopy a “raw image” that is formed on the screen is already result from multiple processing after the signal is acquired by the detector.
ElucidationThe raw data is a set of (unprocessed) data that is given directly as output from the detector, usually expressed as a function of time or position, or photon energy.Comment
Example
Comment
Preflabel RawSample
Comment
Label RawSample
CommentMaterial, sufficiently homogeneous and stable with reference to one or more specified properties, which has been established to be fit for its intended use in measurement or in examination
NOTE 1 Reference materials can be certified reference materials or reference materials without a certified property
value.
NOTE 2 For a reference material to be used as a measurement standard for calibration purposes it needs to be a certified reference material.
NOTE 3 Reference materials can be used for measurement precision evaluation and quality control.
EXAMPLE Human serum without an assigned quantity value for the amount-of-substance concentration of the inherent cholesterol, used for quality control.
NOTE 4 Properties of reference materials can be quantities or nominal properties.
NOTE 5 A reference material is sometimes incorporated into a specially fabricated device.
EXAMPLE Spheres of uniform size mounted on a microscope slide.
NOTE 6 Some reference materials have assigned values in a unit outside the SI. Such materials include vaccines to
which International Units (IU) have been assigned by the World Health Organization.
NOTE 7 A given reference material can only be used for one purpose in a measurement, either calibration or quality
control, but not both.
NOTE 8 ISO/REMCO has an analogous definition but uses the term “measurement process” (ISO Guide 30, Reference
materials – Selected terms and definitions, definition 2.1.1) for both measurement and examination.

-- International Vocabulary of Metrology(VIM)		PreflabelReferenceSample
CommentMaterial, sufficiently homogeneous and stable with respect to one or more specified properties, which has been established to be fit for its intended use in a measurement process”.AltlabelCertified Reference Material
CommentAltlabelReference material
PreflabelReferenceSampleAltlabelReferenceSpecimen
Elucidation Material, sufficiently homogeneous and stable with respect to one or more specified properties, which has been established to be fit for its intended use in a measurement process”.
VimtermReference material
AltlabelCertified Reference MaterialCommentMaterial, sufficiently homogeneous and stable with reference to one or more specified properties, which has been established to be fit for its intended use in measurement or in examination
NOTE 1 Reference materials can be certified reference materials or reference materials without a certified property
value.
NOTE 2 For a reference material to be used as a measurement standard for calibration purposes it needs to be a certified reference material.
NOTE 3 Reference materials can be used for measurement precision evaluation and quality control.
EXAMPLE Human serum without an assigned quantity value for the amount-of-substance concentration of the inherent cholesterol, used for quality control.
NOTE 4 Properties of reference materials can be quantities or nominal properties.
NOTE 5 A reference material is sometimes incorporated into a specially fabricated device.
EXAMPLE Spheres of uniform size mounted on a microscope slide.
NOTE 6 Some reference materials have assigned values in a unit outside the SI. Such materials include vaccines to
which International Units (IU) have been assigned by the World Health Organization.
NOTE 7 A given reference material can only be used for one purpose in a measurement, either calibration or quality
control, but not both.
NOTE 8 ISO/REMCO has an analogous definition but uses the term “measurement process” (ISO Guide 30, Reference
materials – Selected terms and definitions, definition 2.1.1) for both measurement and examination.

-- International Vocabulary of Metrology(VIM)
AltlabelReference materialCommentMaterial, sufficiently homogeneous and stable with respect to one or more specified properties, which has been established to be fit for its intended use in a measurement process”.
AltlabelReferenceSpecimenComment
DefinitionQuality control sample used to determine accuracy and precision of method. [ISO 17858:2007]
VimtermReference material
Label ReferenceSample
CommentSample and Specime are often used interchangeably. However in some cases the term Specimen is used to specify a portion taken under conditions such that the sampling variability cannot be assessed (usually because the population is changing), and is assumed, for convenience, to be zero.PreflabelSample
CommentPortion of material selected from a larger quantity of material. The term needs to be qualified, e.g., bulk sample, representative sample, primary sample, bulked sample, test sample, etc. The term 'sample' implies the existence of a sampling error, i.e., the results obtained on the portions taken are only estimates of the concentration of a constituent or the quantity of a property present in the parent material. If there is no or negligible sampling error, the portion removed is a test portion, aliquot, or specimen.AltlabelSpecimen
CommentElucidationPortion of material selected from a larger quantity of material. The term needs to be qualified, e.g., bulk sample, representative sample, primary sample, bulked sample, test sample, etc. The term 'sample' implies the existence of a sampling error, i.e., the results obtained on the portions taken are only estimates of the concentration of a constituent or the quantity of a property present in the parent material. If there is no or negligible sampling error, the portion removed is a test portion, aliquot, or specimen.
Comment Sample and Specime are often used interchangeably. However in some cases the term Specimen is used to specify a portion taken under conditions such that the sampling variability cannot be assessed (usually because the population is changing), and is assumed, for convenience, to be zero.
PreflabelSampleCommentPortion of material selected from a larger quantity of material. The term needs to be qualified, e.g., bulk sample, representative sample, primary sample, bulked sample, test sample, etc. The term 'sample' implies the existence of a sampling error, i.e., the results obtained on the portions taken are only estimates of the concentration of a constituent or the quantity of a property present in the parent material. If there is no or negligible sampling error, the portion removed is a test portion, aliquot, or specimen.
ElucidationPortion of material selected from a larger quantity of material. The term needs to be qualified, e.g., bulk sample, representative sample, primary sample, bulked sample, test sample, etc. The term 'sample' implies the existence of a sampling error, i.e., the results obtained on the portions taken are only estimates of the concentration of a constituent or the quantity of a property present in the parent material. If there is no or negligible sampling error, the portion removed is a test portion, aliquot, or specimen.Comment
AltlabelSpecimenCommentSample and Specime are often used interchangeably. However in some cases the term Specimen is used to specify a portion taken under conditions such that the sampling variability cannot be assessed (usually because the population is changing), and is assumed, for convenience, to be zero.
Label
CommentAnalysis of the sample in order to determine information that are relevant for the characterisation method.
Comment
Preflabel SampleInspectionAnalysis of the sample in order to determine information that are relevant for the characterisation method.
CommentAnalysis of the sample in order to determine information that are relevant for the characterisation method.
Comment
Example In the Nanoindentation method the Scanning Electron Microscope to determine the indentation area.
Comment
Preflabel SampleInspectionInstrument
Comment
Label SampleInspectionInstrument
CommentParameter used for the sample inspection process
Comment
Preflabel SampleInspectionParameterParameter used for the sample inspection process
CommentParameter used for the sample inspection process
Comment
Label SampleInspectionParameterhttps://w3id.org/emmo/domain/characterisation-methodology/chameo#SamplePreparation
Annotations
CommentSample preparation processes (e.g., machining, polishing, cutting to size, etc.) before actual observation and measurement.
Comment
Annotations
PreflabelSample preparation processes (e.g., machining, polishing, cutting to size, etc.) before actual observation and measurement.
CommentSample preparation processes (e.g., machining, polishing, cutting to size, etc.) before actual observation and measurement.
Comment
Label SamplePreparation
Comment
Preflabel SamplePreparationInstrument
Comment
Label SamplePreparationInstrument
CommentParameter used for the sample preparation process
Comment
Preflabel SamplePreparationParameterParameter used for the sample preparation process
CommentParameter used for the sample preparation process
Comment
Label SamplePreparationParameter
CommentDC polarography with current sampling at the end of each drop life mechanically enforced by a knocker at a preset drop time value. The current sampling and mechanical drop dislodge are synchronized.PreflabelSampledDCPolarography
CommentIn this way, the ratio of faradaic current to double layer charging current is enhanced and the negative influence of charging current is partially eliminated. Due to the improved signal (faradaic current) to noise (charging current) ratio, the limit of detection is lowered.AltlabelTASTPolarography
CommentElucidationDC polarography with current sampling at the end of each drop life mechanically enforced by a knocker at a preset drop time value. The current sampling and mechanical drop dislodge are synchronized.
PreflabelSampledDCPolarographyCommentDC polarography with current sampling at the end of each drop life mechanically enforced by a knocker at a preset drop time value. The current sampling and mechanical drop dislodge are synchronized.
ElucidationDC polarography with current sampling at the end of each drop life mechanically enforced by a knocker at a preset drop time value. The current sampling and mechanical drop dislodge are synchronized.CommentIn this way, the ratio of faradaic current to double layer charging current is enhanced and the negative influence of charging current is partially eliminated. Due to the improved signal (faradaic current) to noise (charging current) ratio, the limit of detection is lowered.
AltlabelTASTPolarographyComment
Iupacreference
CommentThe term can be used to cover either a unit of supply or a portion for analysis. The portion taken may consist of one or more sub-samples and the batch may be the population from which the sample is taken.PreflabelSamplingProcess
CommentElucidation Act of extracting a portion (amount) of material from a larger quantity of material. This operation results in obtaining a sample representative of the batch with respect to the property or properties being investigated.
Act of extracting a portion (amount) of material from a larger quantity of material. This operation results in obtaining a sample representative of the batch with respect to the property or properties being investigated.
PreflabelSamplingProcessCommentThe term can be used to cover either a unit of supply or a portion for analysis. The portion taken may consist of one or more sub-samples and the batch may be the population from which the sample is taken.
ElucidationAct of extracting a portion (amount) of material from a larger quantity of material. This operation results in obtaining a sample representative of the batch with respect to the property or properties being investigated.Comment
Label
CommentAuger electron spectroscopy (AES or simply Auger) is a surface analysis technique that uses an electron beam to excite electrons on atoms in the particle. Atoms that are excited by the electron beam can emit “Auger” electrons. AES measures the kinetic energies of the emitted electrons. The energy of the emitted electrons is characteristic of elements present at the surface and near the surface of a sample.PreflabelScanningAugerElectronMicroscopy
CommentAltlabelAES
PreflabelScanningAugerElectronMicroscopyElucidationAuger electron spectroscopy (AES or simply Auger) is a surface analysis technique that uses an electron beam to excite electrons on atoms in the particle. Atoms that are excited by the electron beam can emit “Auger” electrons. AES measures the kinetic energies of the emitted electrons. The energy of the emitted electrons is characteristic of elements present at the surface and near the surface of a sample.
ElucidationComment Auger electron spectroscopy (AES or simply Auger) is a surface analysis technique that uses an electron beam to excite electrons on atoms in the particle. Atoms that are excited by the electron beam can emit “Auger” electrons. AES measures the kinetic energies of the emitted electrons. The energy of the emitted electrons is characteristic of elements present at the surface and near the surface of a sample.
AltlabelAESComment
Label
CommentThe scanning electron microscope (SEM) uses a focused beam of high-energy electrons to generate a variety of signals at the surface of solid specimens. The signals that derive from electron-sample interactions reveal information about the sample including external morphology (texture), chemical composition, and crystalline structure and orientation of materials making up the sample.PreflabelScanningElectronMicroscopy
CommentAltlabelSEM
PreflabelScanningElectronMicroscopyElucidationThe scanning electron microscope (SEM) uses a focused beam of high-energy electrons to generate a variety of signals at the surface of solid specimens. The signals that derive from electron-sample interactions reveal information about the sample including external morphology (texture), chemical composition, and crystalline structure and orientation of materials making up the sample.
ElucidationComment The scanning electron microscope (SEM) uses a focused beam of high-energy electrons to generate a variety of signals at the surface of solid specimens. The signals that derive from electron-sample interactions reveal information about the sample including external morphology (texture), chemical composition, and crystalline structure and orientation of materials making up the sample.
AltlabelSEMComment
Label
CommentScanning Kelvin probe (SKP) and scanning Kelvin probe force microscopy (SKPFM) are probe techniques which permit mapping of topography and Volta potential distribution on electrode surfaces. It measures the surface electrical potential of a sample without requiring an actual physical contact.PreflabelScanningKelvinProbe
CommentAltlabelSKB
PreflabelScanningKelvinProbeElucidationScanning Kelvin probe (SKP) and scanning Kelvin probe force microscopy (SKPFM) are probe techniques which permit mapping of topography and Volta potential distribution on electrode surfaces. It measures the surface electrical potential of a sample without requiring an actual physical contact.
ElucidationComment Scanning Kelvin probe (SKP) and scanning Kelvin probe force microscopy (SKPFM) are probe techniques which permit mapping of topography and Volta potential distribution on electrode surfaces. It measures the surface electrical potential of a sample without requiring an actual physical contact.
AltlabelSKBComment
LabelAnnotations
CommentScanning probe microscopy (SPM) is a branch of microscopy that forms images of surfaces using a physical probe that scans the specimen.
Comment
Preflabel ScanningProbeMicroscopyScanning probe microscopy (SPM) is a branch of microscopy that forms images of surfaces using a physical probe that scans the specimen.
CommentScanning probe microscopy (SPM) is a branch of microscopy that forms images of surfaces using a physical probe that scans the specimen.
Comment
Label ScanningProbeMicroscopy
CommentScanning Tunneling Microscopy, or STM, is an imaging technique used to obtain ultra-high resolution images at the atomic scale, without using light or electron beams.PreflabelScanningTunnelingMicroscopy
CommentAltlabelSTM
PreflabelScanningTunnelingMicroscopyElucidationScanning Tunneling Microscopy, or STM, is an imaging technique used to obtain ultra-high resolution images at the atomic scale, without using light or electron beams.
ElucidationComment Scanning Tunneling Microscopy, or STM, is an imaging technique used to obtain ultra-high resolution images at the atomic scale, without using light or electron beams.
AltlabelSTMComment
Label
Comment
Preflabel ScatteringAndDiffraction
Comment
Label ScatteringAndDiffraction
CommentData resulting from the application of post-processing or model generation to other data.PreflabelSecondaryData
CommentAltlabelElaborated data
PreflabelSecondaryDataElucidationData resulting from the application of post-processing or model generation to other data.
ElucidationComment Data resulting from the application of post-processing or model generation to other data.
AltlabelElaborated dataComment
Example
CommentSecondary-ion mass spectrometry (SIMS) is a technique used to analyze the composition of solid surfaces and thin films by sputtering the surface of the specimen with a focused primary ion beam and collecting and analyzing ejected secondary ions.PreflabelSecondaryIonMassSpectrometry
CommentAltlabelSIMS
PreflabelSecondaryIonMassSpectrometryElucidationSecondary-ion mass spectrometry (SIMS) is a technique used to analyze the composition of solid surfaces and thin films by sputtering the surface of the specimen with a focused primary ion beam and collecting and analyzing ejected secondary ions.
ElucidationComment Secondary-ion mass spectrometry (SIMS) is a technique used to analyze the composition of solid surfaces and thin films by sputtering the surface of the specimen with a focused primary ion beam and collecting and analyzing ejected secondary ions.
AltlabelSIMSComment
LabelAnnotations
Comment
Preflabel ShearOrTorsionTesting
Comment
Label ShearOrTorsionTestingAnnotations
PreflabelSignal
ElucidationResult (effect) of the interaction between the sample and the probe, which usually is a measurable and quantifiable quantity.
Comment Signal is usually emitted from a characteristic “emission” volume, which can be different from the sample/probe “interaction” volume and can be usually quantified using proper physics equations and/or modelling of the interaction mechanisms.
PreflabelSignal
ElucidationResult (effect) of the interaction between the sample and the probe, which usually is a measurable and quantifiable quantity.
Definition According to UPAC Compendium of Chemical Terminology, a “signal” is “A representation of a quantity within an analytical instrument” (https://goldbook.iupac.org/terms/view/S05661 ).
CommentSpectroscopic techniques are numerous and varied, but all involve measuring the response of a material to different frequencies of electromagnetic radiation. Depending on the technique used, material characterization may be based on the absorption, emission, impedance, or reflection of incident energy by a sample.
Comment
Preflabel SpectrometrySpectroscopic techniques are numerous and varied, but all involve measuring the response of a material to different frequencies of electromagnetic radiation. Depending on the technique used, material characterization may be based on the absorption, emission, impedance, or reflection of incident energy by a sample.
CommentSpectroscopic techniques are numerous and varied, but all involve measuring the response of a material to different frequencies of electromagnetic radiation. Depending on the technique used, material characterization may be based on the absorption, emission, impedance, or reflection of incident energy by a sample.
Comment
Label Spectrometryhttps://w3id.org/emmo/domain/characterisation-methodology/chameo#Spectroscopy
Annotations
CommentSpectroscopy is a category of characterization techniques which use a range of principles to reveal the chemical composition, composition variation, crystal structure and photoelectric properties of materials.
Comment
Annotations
PreflabelSpectroscopy is a category of characterization techniques which use a range of principles to reveal the chemical composition, composition variation, crystal structure and photoelectric properties of materials.
CommentSpectroscopy is a category of characterization techniques which use a range of principles to reveal the chemical composition, composition variation, crystal structure and photoelectric properties of materials.
Comment
Label Spectroscopy
CommentMost instruments show plots of the current at the end of the forward-going pulse and of the backward-going pulse vs. the potential, as well as their difference. This can give valuable information on the kinetics of the electrode reaction and the electrode process.PreflabelSquareWaveVoltammetry
CommentThe current is sampled just before the end of the forward- going pulse and of the backward-going pulse and the difference of the two sampled currents is plotted versus the applied potential of the potential or staircase ramp. The square-wave voltammogram is peak-shapedAltlabelOSWV
CommentThe sensitivity of SWV depends on the reversibility of the electrode reaction of the analyte.AltlabelOsteryoungSquareWaveVoltammetry
Commentvoltammetry in which a square-wave potential waveform is superimposed on an underlying linearly varying potential ramp or staircase rampAltlabelSWV
CommentElucidationvoltammetry in which a square-wave potential waveform is superimposed on an underlying linearly varying potential ramp or staircase ramp
PreflabelSquareWaveVoltammetryCommentMost instruments show plots of the current at the end of the forward-going pulse and of the backward-going pulse vs. the potential, as well as their difference. This can give valuable information on the kinetics of the electrode reaction and the electrode process.
Elucidationvoltammetry in which a square-wave potential waveform is superimposed on an underlying linearly varying potential ramp or staircase rampCommentThe current is sampled just before the end of the forward- going pulse and of the backward-going pulse and the difference of the two sampled currents is plotted versus the applied potential of the potential or staircase ramp. The square-wave voltammogram is peak-shaped
AltlabelOSWVCommentThe sensitivity of SWV depends on the reversibility of the electrode reaction of the analyte.
AltlabelOsteryoungSquareWaveVoltammetryCommentvoltammetry in which a square-wave potential waveform is superimposed on an underlying linearly varying potential ramp or staircase ramp
AltlabelSWVComment
Iupacreferencehttps://doi.org/10.1515/pac-2018-0109Wikipediareferencehttps://en.wikipedia.org/wiki/Squarewave_voltammetry
Wikidatareference https://www.wikidata.org/wiki/Q4016323
Wikipediareferencehttps://en.wikipedia.org/wiki/Squarewave_voltammetryIupacreferencehttps://doi.org/10.1515/pac-2018-0109
LabelAnnotations
Commentchronopotentiometry where the applied current is changed in steps
Comment
Preflabel StepChronopotentiometrychronopotentiometry where the applied current is changed in steps
Commentchronopotentiometry where the applied current is changed in steps
Comment
Label StepChronopotentiometryAnnotations
PreflabelStrippingVoltammetry
Elucidationtwo-step electrochemical measurement in which 1) material is accumulated at an electrode and 2) the amount of an accumulated species is measured by voltammetry. The measured electric current in step 2 is related to the concentration of analyte in the solution by calibration.
Comment Anodic stripping voltammetry (ASV) was historically used to measure concentrations of metal ions in solution using cathodic accumulation with mercury to form an amalgam. Due to the toxicity of mercury and its compounds, inductively coupled plasma optical emission spectrometry and inductively coupled plasma mass spectrometry have frequently replaced ASV at mercury electrodes in the laboratory, often sacrificing the probing of speciation and lability in complex matrices. Mercury has now been replaced by non-toxic bismuth or anti- mony as films on a solid electrode support (such as glassy carbon) with equally good sensi- tivity and detection limits.
PreflabelStrippingVoltammetry
Elucidationtwo-step electrochemical measurement in which 1) material is accumulated at an electrode and 2) the amount of an accumulated species is measured by voltammetry. The measured electric current in step 2 is related to the concentration of analyte in the solution by calibration.Wikipediareferencehttps://en.wikipedia.org/wiki/Electrochemical_stripping_analysis
Iupacreference https://doi.org/10.1515/pac-2018-0109
Wikipediareferencehttps://en.wikipedia.org/wiki/Electrochemical_stripping_analysis
Label StrippingVoltammetry
Comment
Preflabel Synchrotron
Comment
Label Synchrotron
CommentTensile testing, also known as tension testing, is a test in which a sample is subjected to a controlled tension until failure. Properties that are directly measured via a tensile test are ultimate tensile strength, breaking strength, maximum elongation and reduction in area. From these measurements the following properties can also be determined: Young's modulus, Poisson's ratio, yield strength, and strain-hardening characteristics. Uniaxial tensile testing is the most commonly used for obtaining the mechanical characteristics of isotropic materials. Some materials use biaxial tensile testing. The main difference between these testing machines being how load is applied on the materials.PreflabelTensileTesting
CommentAltlabelTensionTest
PreflabelTensileTestingElucidationTensile testing, also known as tension testing, is a test in which a sample is subjected to a controlled tension until failure. Properties that are directly measured via a tensile test are ultimate tensile strength, breaking strength, maximum elongation and reduction in area. From these measurements the following properties can also be determined: Young's modulus, Poisson's ratio, yield strength, and strain-hardening characteristics. Uniaxial tensile testing is the most commonly used for obtaining the mechanical characteristics of isotropic materials. Some materials use biaxial tensile testing. The main difference between these testing machines being how load is applied on the materials.
ElucidationComment Tensile testing, also known as tension testing, is a test in which a sample is subjected to a controlled tension until failure. Properties that are directly measured via a tensile test are ultimate tensile strength, breaking strength, maximum elongation and reduction in area. From these measurements the following properties can also be determined: Young's modulus, Poisson's ratio, yield strength, and strain-hardening characteristics. Uniaxial tensile testing is the most commonly used for obtaining the mechanical characteristics of isotropic materials. Some materials use biaxial tensile testing. The main difference between these testing machines being how load is applied on the materials.
AltlabelTensionTestComment
Label
CommentThermomechanical analysis (TMA) is a technique used in thermal analysis, a branch of materials science which studies the properties of materials as they change with temperature.PreflabelThermochemicalTesting
CommentAltlabelTMA
PreflabelThermochemicalTestingElucidationThermomechanical analysis (TMA) is a technique used in thermal analysis, a branch of materials science which studies the properties of materials as they change with temperature.
ElucidationComment Thermomechanical analysis (TMA) is a technique used in thermal analysis, a branch of materials science which studies the properties of materials as they change with temperature.
AltlabelTMAComment
Label
CommentThermogravimetric analysis or thermal gravimetric analysis (TGA) is a method of thermal analysis in which the mass of a sample is measured over time as the temperature changes. This measurement provides information about physical phenomena, such as phase transitions, absorption, adsorption and desorption; as well as chemical phenomena including chemisorptions, thermal decomposition, and solid-gas reactions (e.g., oxidation or reduction).PreflabelThermogravimetry
CommentAltlabelTGA
PreflabelThermogravimetryElucidationThermogravimetric analysis or thermal gravimetric analysis (TGA) is a method of thermal analysis in which the mass of a sample is measured over time as the temperature changes. This measurement provides information about physical phenomena, such as phase transitions, absorption, adsorption and desorption; as well as chemical phenomena including chemisorptions, thermal decomposition, and solid-gas reactions (e.g., oxidation or reduction).
ElucidationComment Thermogravimetric analysis or thermal gravimetric analysis (TGA) is a method of thermal analysis in which the mass of a sample is measured over time as the temperature changes. This measurement provides information about physical phenomena, such as phase transitions, absorption, adsorption and desorption; as well as chemical phenomena including chemisorptions, thermal decomposition, and solid-gas reactions (e.g., oxidation or reduction).
AltlabelTGAComment
Label
CommentMethod of mechanical testing that provides values for the modulus of elasticity in bending, flexural stress, flexural strain, and the flexural stress–strain response of a material sample
Comment
Preflabel ThreePointBendingTesting
AltlabelThreePointFlexuralTest
Elucidation Method of mechanical testing that provides values for the modulus of elasticity in bending, flexural stress, flexural strain, and the flexural stress–strain response of a material sample
AltlabelThreePointFlexuralTestCommentMethod of mechanical testing that provides values for the modulus of elasticity in bending, flexural stress, flexural strain, and the flexural stress–strain response of a material sample
Wikidatareferencehttps://www.wikidata.org/wiki/Q2300905Comment
Wikipediareference https://en.wikipedia.org/wiki/Three-point_flexural_test
Wikidatareferencehttps://www.wikidata.org/wiki/Q2300905
Label ThreePointBendingTesting
CommentTomography is imaging by sections or sectioning that uses any kind of penetrating wave. The method is used in radiology, archaeology, biology, atmospheric science, geophysics, oceanography, plasma physics, materials science, cosmochemistry, astrophysics, quantum information, and other areas of science. The word tomography is derived from Ancient Greek τόμος tomos, "slice, section" and γράφω graphō, "to write" or, in this context as well, "to describe." A device used in tomography is called a tomograph, while the image produced is a tomogram.
Preflabel TomographyTomography is imaging by sections or sectioning that uses any kind of penetrating wave. The method is used in radiology, archaeology, biology, atmospheric science, geophysics, oceanography, plasma physics, materials science, cosmochemistry, astrophysics, quantum information, and other areas of science. The word tomography is derived from Ancient Greek τόμος tomos, "slice, section" and γράφω graphō, "to write" or, in this context as well, "to describe." A device used in tomography is called a tomograph, while the image produced is a tomogram.
CommentTomography is imaging by sections or sectioning that uses any kind of penetrating wave. The method is used in radiology, archaeology, biology, atmospheric science, geophysics, oceanography, plasma physics, materials science, cosmochemistry, astrophysics, quantum information, and other areas of science. The word tomography is derived from Ancient Greek τόμος tomos, "slice, section" and γράφω graphō, "to write" or, in this context as well, "to describe." A device used in tomography is called a tomograph, while the image produced is a tomogram.
Label Tomography
CommentTransmission electron microscopy (TEM) is a microscopy technique in which a beam of electrons is transmitted through a specimen to form an image. The specimen is most often an ultrathin section less than 100 nm thick or a suspension on a grid. An image is formed from the interaction of the electrons with the sample as the beam is transmitted through the specimen. The image is then magnified and focused onto an imaging device, such as a fluorescent screen, a layer of photographic film, or a sensor such as a scintillator attached to a charge-coupled device.PreflabelTransmissionElectronMicroscopy
CommentAltlabelTEM
PreflabelTransmissionElectronMicroscopyElucidationTransmission electron microscopy (TEM) is a microscopy technique in which a beam of electrons is transmitted through a specimen to form an image. The specimen is most often an ultrathin section less than 100 nm thick or a suspension on a grid. An image is formed from the interaction of the electrons with the sample as the beam is transmitted through the specimen. The image is then magnified and focused onto an imaging device, such as a fluorescent screen, a layer of photographic film, or a sensor such as a scintillator attached to a charge-coupled device.
ElucidationComment Transmission electron microscopy (TEM) is a microscopy technique in which a beam of electrons is transmitted through a specimen to form an image. The specimen is most often an ultrathin section less than 100 nm thick or a suspension on a grid. An image is formed from the interaction of the electrons with the sample as the beam is transmitted through the specimen. The image is then magnified and focused onto an imaging device, such as a fluorescent screen, a layer of photographic film, or a sensor such as a scintillator attached to a charge-coupled device.
AltlabelTEMComment
Label
CommentUltrasonic testing (UT) is a family of non-destructive testing techniques based on the propagation of ultrasonic waves in the object or material tested. In most common UT applications, very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz, and occasionally up to 50 MHz, are transmitted into materials to detect internal flaws or to characterize materials. A common example is ultrasonic thickness measurement, which tests the thickness of the test object, for example, to monitor pipework corrosion. Ultrasonic testing is often performed on steel and other metals and alloys, though it can also be used on concrete, wood and composites, albeit with less resolution. It is used in many industries including steel and aluminium construction, metallurgy, manufacturing, aerospace, automotive and other transportation sectors.
Preflabel UltrasonicTestingUltrasonic testing (UT) is a family of non-destructive testing techniques based on the propagation of ultrasonic waves in the object or material tested. In most common UT applications, very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz, and occasionally up to 50 MHz, are transmitted into materials to detect internal flaws or to characterize materials. A common example is ultrasonic thickness measurement, which tests the thickness of the test object, for example, to monitor pipework corrosion. Ultrasonic testing is often performed on steel and other metals and alloys, though it can also be used on concrete, wood and composites, albeit with less resolution. It is used in many industries including steel and aluminium construction, metallurgy, manufacturing, aerospace, automotive and other transportation sectors.
CommentUltrasonic testing (UT) is a family of non-destructive testing techniques based on the propagation of ultrasonic waves in the object or material tested. In most common UT applications, very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz, and occasionally up to 50 MHz, are transmitted into materials to detect internal flaws or to characterize materials. A common example is ultrasonic thickness measurement, which tests the thickness of the test object, for example, to monitor pipework corrosion. Ultrasonic testing is often performed on steel and other metals and alloys, though it can also be used on concrete, wood and composites, albeit with less resolution. It is used in many industries including steel and aluminium construction, metallurgy, manufacturing, aerospace, automotive and other transportation sectors.
Label UltrasonicTesting
Annotations
CommentHigh level description of the user case. It can include the properties of the material, the conditions of the environment and possibly mentioning which are the industrial sectors of reference.
Preflabel UserCaseElucidation High level description of the user case. It can include the properties of the material, the conditions of the environment and possibly mentioning which are the industrial sectors of reference.
CommentHigh level description of the user case. It can include the properties of the material, the conditions of the environment and possibly mentioning which are the industrial sectors of reference.
Label UserCase
CommentVapor pressure osmometry measures vapor pressure indirectly by measuring the change in temperature of a polymer solution on dilution by solvent vapor and is generally useful for polymers with Mn below 10,000–40,000 g/mol. When molecular weight is more than that limit, the quantity being measured becomes very small to detect.PreflabelVaporPressureDepressionOsmometry
CommentAltlabelVPO
PreflabelVaporPressureDepressionOsmometryElucidationVapor pressure osmometry measures vapor pressure indirectly by measuring the change in temperature of a polymer solution on dilution by solvent vapor and is generally useful for polymers with Mn below 10,000–40,000 g/mol. When molecular weight is more than that limit, the quantity being measured becomes very small to detect.
ElucidationComment Vapor pressure osmometry measures vapor pressure indirectly by measuring the change in temperature of a polymer solution on dilution by solvent vapor and is generally useful for polymers with Mn below 10,000–40,000 g/mol. When molecular weight is more than that limit, the quantity being measured becomes very small to detect.
AltlabelVPOComment
Label
CommentViscometry or viscosity method was one of the first methods used for determining the MW of polymers. In this method, the viscosity of polymer solution is measured, and the simplest method used is capillary viscometry by using the Ubbelohde U-tube viscometer. In this method, both the flow time of the polymer solution (t) and the flow time of the pure solvent (t0) are recorded. The ratio of the polymer solution flow time (t) to the flow time of pure solvent (t0) is equal to the ratio of their viscosities (η/η0) only if they have the same densities.PreflabelViscometry
CommentAltlabelViscosity
PreflabelViscometryElucidationViscometry or viscosity method was one of the first methods used for determining the MW of polymers. In this method, the viscosity of polymer solution is measured, and the simplest method used is capillary viscometry by using the Ubbelohde U-tube viscometer. In this method, both the flow time of the polymer solution (t) and the flow time of the pure solvent (t0) are recorded. The ratio of the polymer solution flow time (t) to the flow time of pure solvent (t0) is equal to the ratio of their viscosities (η/η0) only if they have the same densities.
ElucidationComment Viscometry or viscosity method was one of the first methods used for determining the MW of polymers. In this method, the viscosity of polymer solution is measured, and the simplest method used is capillary viscometry by using the Ubbelohde U-tube viscometer. In this method, both the flow time of the polymer solution (t) and the flow time of the pure solvent (t0) are recorded. The ratio of the polymer solution flow time (t) to the flow time of pure solvent (t0) is equal to the ratio of their viscosities (η/η0) only if they have the same densities.
AltlabelViscosityComment
Label
PreflabelVoltammetry
ElucidationVoltammetry is an analytical technique based on the measure of the current flowing through an electrode dipped in a solution containing electro-active compounds, while a potential scanning is imposed upon it.
Comment The current vs. potential (I-E) curve is called a voltammogram.
PreflabelVoltammetryWikipediareferencehttps://en.wikipedia.org/wiki/Voltammetry
ElucidationVoltammetry is an analytical technique based on the measure of the current flowing through an electrode dipped in a solution containing electro-active compounds, while a potential scanning is imposed upon it.Wikidatareferencehttps://www.wikidata.org/wiki/Q904093
Iupacreference https://doi.org/10.1515/pac-2018-0109
Wikidatareferencehttps://www.wikidata.org/wiki/Q904093
Ievreference https://www.electropedia.org/iev/iev.nsf/display?openform&ievref=114-04-11
Wikipediareferencehttps://en.wikipedia.org/wiki/Voltammetry
Label Voltammetry
CommentHydrodynamic voltammetry using a a rotating disc electrode, where the limiting current is described by the Levich equation
Preflabel VoltammetryAtARotatingDiskElectrodeHydrodynamic voltammetry using a a rotating disc electrode, where the limiting current is described by the Levich equation
CommentHydrodynamic voltammetry using a a rotating disc electrode, where the limiting current is described by the Levich equation
Iupacreference https://doi.org/10.1515/pac-2018-0109
CommentA wear test measures the changes in conditions caused by friction, and the result is obtained from deformation, scratches, and indentations on the interacting surfaces. Wear is defined as the progressive removal of the material from a solid surface and manifested by a change in the geometry of the surface.
Preflabel WearTestingA wear test measures the changes in conditions caused by friction, and the result is obtained from deformation, scratches, and indentations on the interacting surfaces. Wear is defined as the progressive removal of the material from a solid surface and manifested by a change in the geometry of the surface.
CommentA wear test measures the changes in conditions caused by friction, and the result is obtained from deformation, scratches, and indentations on the interacting surfaces. Wear is defined as the progressive removal of the material from a solid surface and manifested by a change in the geometry of the surface.
Label WearTesting
CommentX-ray photoelectron spectroscopy (XPS), also known as ESCA (electron spectroscopy for chemical analysis) is a surface analysis technique which provides both elemental and chemical state information virtually without restriction on the type of material which can be analysed. It is a relatively simple technique where the sample is illuminated with X-rays which have enough energy to eject an electron from the atom. These ejected electrons are known as photoelectrons. The kinetic energy of these emitted electrons is characteristic of the element from which the photoelectron originated. The position and intensity of the peaks in an energy spectrum provide the desired chemical state and quantitative information. The surface sensitivity of XPS is determined by the distance that that photoelectron can travel through the material without losing any kinteic energy. These elastiaclly scattered photoelectrons contribute to the photoelectron peak, whilst photoelectrons that have been inelastically scattered, losing some kinetic energy before leaving the material, will contribute to the spectral background.
Preflabel XpsVariableKinetic
ElucidationX-ray photoelectron spectroscopy (XPS), also known as ESCA (electron spectroscopy for chemical analysis) is a surface analysis technique which provides both elemental and chemical state information virtually without restriction on the type of material which can be analysed. It is a relatively simple technique where the sample is illuminated with X-rays which have enough energy to eject an electron from the atom. These ejected electrons are known as photoelectrons. The kinetic energy of these emitted electrons is characteristic of the element from which the photoelectron originated. The position and intensity of the peaks in an energy spectrum provide the desired chemical state and quantitative information. The surface sensitivity of XPS is determined by the distance that that photoelectron can travel through the material without losing any kinteic energy. These elastiaclly scattered photoelectrons contribute to the photoelectron peak, whilst photoelectrons that have been inelastically scattered, losing some kinetic energy before leaving the material, will contribute to the spectral background.
Altlabel Electron spectroscopy for chemical analysis (ESCA)X-ray photoelectron spectroscopy (XPS)
ElucidationX-ray photoelectron spectroscopy (XPS), also known as ESCA (electron spectroscopy for chemical analysis) is a surface analysis technique which provides both elemental and chemical state information virtually without restriction on the type of material which can be analysed. It is a relatively simple technique where the sample is illuminated with X-rays which have enough energy to eject an electron from the atom. These ejected electrons are known as photoelectrons. The kinetic energy of these emitted electrons is characteristic of the element from which the photoelectron originated. The position and intensity of the peaks in an energy spectrum provide the desired chemical state and quantitative information. The surface sensitivity of XPS is determined by the distance that that photoelectron can travel through the material without losing any kinteic energy. These elastiaclly scattered photoelectrons contribute to the photoelectron peak, whilst photoelectrons that have been inelastically scattered, losing some kinetic energy before leaving the material, will contribute to the spectral background.
CommentX-ray photoelectron spectroscopy (XPS), also known as ESCA (electron spectroscopy for chemical analysis) is a surface analysis technique which provides both elemental and chemical state information virtually without restriction on the type of material which can be analysed. It is a relatively simple technique where the sample is illuminated with X-rays which have enough energy to eject an electron from the atom. These ejected electrons are known as photoelectrons. The kinetic energy of these emitted electrons is characteristic of the element from which the photoelectron originated. The position and intensity of the peaks in an energy spectrum provide the desired chemical state and quantitative information. The surface sensitivity of XPS is determined by the distance that that photoelectron can travel through the material without losing any kinteic energy. These elastiaclly scattered photoelectrons contribute to the photoelectron peak, whilst photoelectrons that have been inelastically scattered, losing some kinetic energy before leaving the material, will contribute to the spectral background.
Label XpsVariableKinetic
Commenta technique used to analyze the atomic and molecular structure of crystalline materials by observing the diffraction patterns produced when X-rays interact with the regular array of atoms in the crystal lattice
Comment
Preflabel XrayDiffraction
AltlabelXRD
Elucidation a technique used to analyze the atomic and molecular structure of crystalline materials by observing the diffraction patterns produced when X-rays interact with the regular array of atoms in the crystal lattice
AltlabelXRDCommenta technique used to analyze the atomic and molecular structure of crystalline materials by observing the diffraction patterns produced when X-rays interact with the regular array of atoms in the crystal lattice
Wikidatareferencehttps://www.wikidata.org/wiki/Q12101244Comment
Wikipediareference https://en.wikipedia.org/wiki/X-ray_crystallography
Wikidatareferencehttps://www.wikidata.org/wiki/Q12101244
Label XrayDiffraction
Commenta method for analyzing the crystal structure of powdered materials by measuring the diffraction patterns produced when X-rays interact with randomly oriented crystallites within the samplePreflabelXrayPowderDiffraction
CommentAltlabelXRPD
PreflabelXrayPowderDiffractionElucidationa method for analyzing the crystal structure of powdered materials by measuring the diffraction patterns produced when X-rays interact with randomly oriented crystallites within the sample
ElucidationComment a method for analyzing the crystal structure of powdered materials by measuring the diffraction patterns produced when X-rays interact with randomly oriented crystallites within the sample
AltlabelXRPDComment
Wikipediareference
Comment
Preflabel XrdGrazingIncidence
Comment
Label XrdGrazingIncidence
Comment
Preflabel hasAccessConditions
Comment
Label hasAccessConditions
Comment
Preflabel hasBeginCharacterisationTaskhasBeginCharacterizationTask
Comment
Label hasBeginCharacterisationTask
Comment
Preflabel hasCharacterisationComponenthasCharacterizationComponent
Comment
Label hasCharacterisationComponent
Comment
Preflabel hasCharacterisationEnvironmenthasCharacterizationEnvironment
Comment
Label hasCharacterisationEnvironment
Comment
Preflabel hasCharacterisationEnvironmentPropertyhasCharacterizationEnvironmentProperty
Comment
Label hasCharacterisationEnvironmentProperty
Comment
Preflabel hasCharacterisationInputhasCharacterizationInput
Comment
Label hasCharacterisationInput
Comment
Preflabel hasCharacterisationMeasurementInstrumenthasCharacterizationMeasurementInstrument
Comment
Label hasCharacterisationMeasurementInstrument
Comment
Preflabel hasCharacterisationOutputhasCharacterizationOutput
Comment
Label hasCharacterisationOutput
Comment
Preflabel hasCharacterisationProcedureValidation
Comment
Label hasCharacterisationProcedureValidation
Comment
Preflabel hasCharacterisationPropertyhasCharacterizationProperty
Comment
Label hasCharacterisationProperty
Comment
Preflabel hasCharacterisationSoftwarehasCharacterizationSoftware
Comment
Label hasCharacterisationSoftwareAnnotations
Comment
Preflabel hasCharacterisationTaskhasCharacterizationTask
Comment
Label hasCharacterisationTaskAnnotations
Comment
Preflabel hasDataAcquisitionRate
Comment
Label hasDataAcquisitionRate
Comment
Preflabel hasDataProcessingThroughCalibration
Comment
Label hasDataProcessingThroughCalibration
Comment
Preflabel hasDataQuality
Comment
Label hasDataQuality
Comment
Preflabel hasDataset
Comment
Label hasDatasetAnnotations
Comment
Preflabel hasDateOfCalibration
Comment
Label hasDateOfCalibration
Comment
Preflabel hasEndCharacterisationTaskhasEndCharacterizationTask
Comment
Label hasEndCharacterisationTask
Comment
Preflabel hasHardwareSpecification
Comment
Label hasHardwareSpecification
Comment
Preflabel hasHazard
Comment
Label hasHazard
Comment
Preflabel hasHolder
Comment
Label hasHolder
Comment
Preflabel hasInstrumentForCalibration
Comment
Label hasInstrumentForCalibrationAnnotations
Comment
Preflabel hasInteractionVolume
Comment
Label hasInteractionVolumeAnnotations
Comment
Preflabel hasInteractionWithProbe
Comment
Label hasInteractionWithProbe
Comment
Preflabel hasInteractionWithSample
Comment
Label hasInteractionWithSampleAnnotations
Comment
Preflabel hasLab
Comment
Label hasLabAnnotations
Comment
Preflabel hasLevelOfAutomation
Comment
Label hasLevelOfAutomation
CommentA string representing the Manufacturer of a CharacterisationHardware
Preflabel hasManufacturerA string representing the Manufacturer of a CharacterisationHardware
CommentA string representing the Manufacturer of a CharacterisationHardware
Label hasManufacturerAnnotations
Comment
Preflabel hasMeasurementDetector
Comment
Label hasMeasurementDetectorAnnotations
Comment
Preflabel hasMeasurementParameter
Comment
Label hasMeasurementParameter
Comment
Preflabel hasMeasurementProbe
Comment
Label hasMeasurementProbeAnnotations
Comment
Preflabel hasMeasurementSample
Comment
Label hasMeasurementSample
Comment
Preflabel hasMeasurementTime
Comment
Label hasMeasurementTime
Annotations
CommentA string representing the model of a CharacterisationHardware
Preflabel hasModelElucidation A string representing the model of a CharacterisationHardware
CommentA string representing the model of a CharacterisationHardware
Label hasModel
Comment
Preflabel hasOperator
Comment
Label hasOperatorAnnotations
Comment
Preflabel hasPeerReviewedArticle
Comment
Label hasPeerReviewedArticleAnnotations
Comment
Preflabel hasPhysicsOfInteraction
Comment
Label hasPhysicsOfInteractionAnnotations
Comment
Preflabel hasPostProcessingModel
Comment
Label hasPostProcessingModel
Comment
Preflabel hasProcessingReproducibility
Comment
Label hasProcessingReproducibility
Comment
Preflabel hasReferenceSample
Comment
Label hasReferenceSample
Comment
Preflabel hasSampleBeforeSamplePreparation
Comment
Label hasSampleBeforeSamplePreparationAnnotations
Comment
Preflabel hasSampleForInspection
Comment
Label hasSampleForInspection
Comment
Preflabel hasSampleInspectionInstrument
Comment
Label hasSampleInspectionInstrument
Comment
Preflabel hasSampleInspectionParameter
Comment
Label hasSampleInspectionParameter
Comment
Preflabel hasSamplePreparationInstrument
Comment
Label hasSamplePreparationInstrument
Comment
Preflabel hasSamplePreparationParameter
Comment
Label hasSamplePreparationParameter
Comment
Preflabel hasSampledSample
Comment
Label hasSampledSample
CommentA string representing the UniqueID of a CharacterisationHardware
Preflabel hasUniqueIDA string representing the UniqueID of a CharacterisationHardware
CommentA string representing the UniqueID of a CharacterisationHardware
Label hasUniqueID
Comment
Preflabel requiresLevelOfExpertise
Comment
Label requiresLevelOfExpertise
CommentUsed to correlate a user case to a characterisation procedure
Preflabel userCaseHasCharacterisationProcedure
AltlabeluserCaseHasCharacterizationProcedure
Elucidation Used to correlate a user case to a characterisation procedure
AltlabeluserCaseHasCharacterizationProcedureCommentUsed to correlate a user case to a characterisation procedure
Label