You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
I have 3 74HC595s controlling SIX(yes six, because I don't like to use the one pin on the other side of the chip)common cathode RGB LEDs with frequency set to 240(anything lower was just flickering so much I could not look at the LEDs)... First two registers flicker the LEDs at about 15Hz and the third one is fine fading the green but not blue and red(I will upload image of my PCB in Fritzing later)... Using timer2 just makes it worse or not working at all, using balance load slows the flicker to about 3/4 of the speed.
The text was updated successfully, but these errors were encountered:
I have 3 74HC595s controlling SIX(yes six, because I don't like to use the one pin on the other side of the chip)common cathode RGB LEDs with frequency set to 240(anything lower was just flickering so much I could not look at the LEDs)... First two registers flicker the LEDs at about 15Hz and the third one is fine fading the green but not blue and red(I will upload image of my PCB in Fritzing later)... Using timer2 just makes it worse or not working at all, using balance load slows the flicker to about 3/4 of the speed.
The text was updated successfully, but these errors were encountered: