Replies: 2 comments 11 replies
-
|
Needs to be formatted with a single partition (well, the first one is used if there are more than one), and MS-DOS FAT32. ExFAT is not supported, it needs to the FAT32. |
Beta Was this translation helpful? Give feedback.
-
|
and the only one pin is different on connection: SD-SCK (is this the same as CLK?) https://m.media-amazon.com/images/I/41Rm6WfTXYL._AC_UF1000,1000_QL80_.jpg |
Beta Was this translation helpful? Give feedback.
-
I just wired up the slot of one of my test displays with your pin assignment. This looks good, it is working for me.
Yes, SCK is CLK
|
Beta Was this translation helpful? Give feedback.
-
|
(and yes, something with the background color is broken. I need to investigate this... ) |
Beta Was this translation helpful? Give feedback.
-
|
You also have to change the default button 2 pin to something different (or disable it with -1), otherwise it collides with the SD card pins. But very likely you did this was the config form will show you a warning.... |
Beta Was this translation helpful? Give feedback.
-
|
(But wait, I have to check one more thing, there is potentially one problem on the software side) |
Beta Was this translation helpful? Give feedback.
-
|
with new update still the same, but colors are OK now. |
Beta Was this translation helpful? Give feedback.
-
hi, please more info about SD card
What type of FS ? Now my 32gb card if formated exfat.
connected to pins 15,35,32,33
device T-beam + ILI9225 with sd slot
Beta Was this translation helpful? Give feedback.
All reactions