Skip to content

Latest commit

 

History

History
21 lines (14 loc) · 1.2 KB

README.md

File metadata and controls

21 lines (14 loc) · 1.2 KB
Raw

Raspi-readMS5611/readMS5611.c

This project writes/reads MS5611 TEMP/P sensor.

compile with "sudo gcc -o readMS5611 readMS5611.c -lm" (-lm is option to use math.h library in Linux OS)
execute with "sudo ./readMS5611"

#Raspi-readMS5611/SerialtoMatlab.c This project is based on readMS5611.c. (just added functions to send Altitude data over serial port to plot graph in MATLAB)

Warnings

default dev-file is set as "/dev/i2c-1". You should change this to "/dev/i2c-0" if your configuration is different with mine. You can figure out your configuration in "/dev" (check "/dev/i2c-'number'")

default dev-address is set as 0x77. You should change this if you have to.

please email me([email protected]) if you have comments.

License

This project is licensed under the MIT license (see the included license file for more information).

Note: The libraries used in this project might not be licensed under the MIT license. I've made sure that the usage of all libraries as a part of this project, my modifications and the redistribution of the modified and unmodified libraries are permitted by the respective licenses, but the permissions of the MIT license might not apply, especially in regard to relicensing.