Can't connect to automatically found devices, no way to enter pair code

[Herrschacht]

I have tried it all:

• devices are not connected to anything anymore
• reset by battery out
• a) HASS is recognizing them, can add them, but no connection is made
• b) set in pairing mode, HASS is recognizing them, can add them, but no connection is made
• c) adding by MAC adress worked too, but same result
  Easy way of entering pair code in connection flow?

[dbuezas]

see the link in the readme https://github.com/dbuezas/eq3btsmart?tab=readme-ov-file#pairing-issues

[Herrschacht]

I did, but pair with correct MAC didn’t work. Even though they have been in paring mode. Weirdly scan off didn’t work before neither over Terminal. Any ideas?

…

Am 09.03.2024 um 12:55 schrieb David Buezas ***@***.***>: see the link in the readme https://github.com/dbuezas/eq3btsmart?tab=readme-ov-file#pairing-issues — Reply to this email directly, view it on GitHub <#110 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BGXYVK7T54UN7WEFGD3P43TYXL2BVAVCNFSM6AAAAABEN7YE7CVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOBWHAZTKOBXGQ>. You are receiving this because you authored the thread.

[dbuezas]

Do you have btproxys or more than one Bluetooth adapter configured?

[Herrschacht]

nope. even moved Pi 4 very close to both for eliminating this.

…

Am 09.03.2024 um 13:46 schrieb David Buezas ***@***.***>: Do you have btproxys or more than one Bluetooth adapter configured? — Reply to this email directly, view it on GitHub <#110 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BGXYVKZXGDAZ2HBGK7KKE2DYXMAAXAVCNFSM6AAAAABEN7YE7CVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOBWHA2DOOBSGE>. You are receiving this because you authored the thread.

[Herrschacht]

they are on the newest firmware; updated recently before I started my Pi4 project.

…

Am 09.03.2024 um 13:51 schrieb Phillip Schacht ***@***.***>: nope. even moved Pi 4 very close to both for eliminating this. > Am 09.03.2024 um 13:46 schrieb David Buezas ***@***.***>: > > > Do you have btproxys or more than one Bluetooth adapter configured? > > — > Reply to this email directly, view it on GitHub <#110 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BGXYVKZXGDAZ2HBGK7KKE2DYXMAAXAVCNFSM6AAAAABEN7YE7CVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOBWHA2DOOBSGE>. > You are receiving this because you authored the thread. >

[dbuezas]

I had this issue with an EQ3 that I ended up replacing, so it may be broken.

You may want to try telling bluetoothctl to forget the device completely, then doing a factory reset in the eq3 (see the device's manual) and then starting over.

[Herrschacht]

the did work perfectly before with Calor-BT iOS app. Will connect them with the app now again and check maybe next weekend once more after removing them from iOS app and phone bluetooth. Thx a lot for the quick replies...

…

Am 09.03.2024 um 14:35 schrieb David Buezas ***@***.***>: I had this issue with an EQ3 that I ended up replacing, so it may be broken. You may want to try telling bluetoothctl to forget the device completely, then doing a factory reset in the eq3 (see the device's manual) and then starting over. — Reply to this email directly, view it on GitHub <#110 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BGXYVK5PBNJLP32PN3CFEMDYXMFYJAVCNFSM6AAAAABEN7YE7CVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOBWHA2TQOBRGM>. You are receiving this because you authored the thread.

[dbuezas]

Oh, that may be it, make sure to disconnect from your phone

[Herrschacht]

I did. Didn’t explain myself good enough. I think my menu buttons are broke on one. Not getting into reset. Second one has a bit of the defect on the wheel. I have two more somewhere, but likely I rather sell them all one day and get something else or dont need those anymore bc of modern heating.Great job for the integration by the way and creating this for the community. And thx a lot for your support here. Have a good oneAm 09.03.2024 um 15:05 schrieb David Buezas ***@***.***>: Oh, that may be it, make sure to disconnect from your phone —Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: ***@***.***>

[maltehi]

I had the same problem - bluetoothctl did just not prompt for a PIN. Deleting the pairing in the bluetooth settings in my phone fixed it. Thanks!