BlueRetro Cables Build Instructions
- Parallel 1P (12 buttons) adapter cable
- Parallel 2P (6 buttons each) adapter cable
- FC / NES adapter cable
- Genesis adapter cable
- SFC / SNES adapter cable
- Saturn adapter cable
- JVS adapter cable
- Nintendo 64 adapter cable
- Dreamcast adapter cable
- GameCube adapter cable
- DB25 Male solder cup (x1) (DKPN: AE10984-ND PN: A-DS 25 LL/Z)
- 74AHCT1G125 SC70-5 (x12) (DKPN: 296-4709-1-ND PN: SN74AHCT1G125DCKR)
- DB25 Backshell (x1) (DKPN: 970-25BPE-ND PN: 970-025-010R011)
- Level shifter PCB (x1)
- NeoGeo DB15 controller plug (x1) (or any other parallel interface)
https://github.com/darthcloud/BlueRetroHW/blob/master/DIY/NeoGeo.pdf
- Solder 74AHCT1G125 to footprint highlighted in red.
- Bridge HI side of jumper I39.
- Connect pad DIR1, DIR2, DIR3 & DIR4 to GND.
- Connect cords according to table below and pinout reference.
| PCB PAD | Cord | Pin | Name | Use | Required? |
|---|---|---|---|---|---|
| VIN | NEOGEO P1 | 1 | 5V | BlueRetro Power | Yes |
| GND | NEOGEO P1 | 8 | GND | BlueRetro Power | Yes |
| IO5 | NEOGEO P1 | 7 | DOWN | Player 1 BTN | No |
| IO3 | NEOGEO P1 | 15 | UP | Player 1 BTN | No |
| IO27 | NEOGEO P1 | 5 | B | Player 1 BTN | No |
| IO26 | NEOGEO P1 | 13 | A | Player 1 BTN | No |
| IO23 | NEOGEO P1 | 6 | RIGHT | Player 1 BTN | No |
| IO18 | NEOGEO P1 | 14 | LEFT | Player 1 BTN | No |
| IO21 | NEOGEO P1 | 4 | D | Player 1 BTN | No |
| IO19 | NEOGEO P1 | 12 | C | Player 1 BTN | No |
| IO32 | NEOGEO P1 | 11 | START | Player 1 BTN | No |
| IO33 | NEOGEO P1 | 2 | CREDIT | Player 1 BTN | No |
| IO25 | NEOGEO P1 | 10 | 6 | Player 1 BTN | No |
| IO22 | NEOGEO P1 | 3 | SELECT | Player 1 BTN | No |
- DB25 Male solder cup (x1) (DKPN: AE10984-ND PN: A-DS 25 LL/Z)
- 74AHCT1G125 SC70-5 (x12) (DKPN: 296-4709-1-ND PN: SN74AHCT1G125DCKR)
- DB25 Backshell (x1) (DKPN: 970-25BPE-ND PN: 970-025-010R011)
- Level shifter PCB (x1)
- Genesis DB9 controller plug (x2)
https://github.com/darthcloud/BlueRetroHW/blob/master/DIY/SMS.pdf
- Solder 74AHCT1G125 to footprint highlighted in red.
- Bridge HI side of jumper I39.
- Connect pad DIR0, DIR1, DIR2 & DIR4 to GND.
- Connect cords according to table below and pinout reference.
| PCB PAD | Cord | Pin | Name | Use | Required? |
|---|---|---|---|---|---|
| VIN | SMS P1 | 5 | 5V | BlueRetro Power | Yes |
| VIN | SMS P1 | 7 | 5V | BlueRetro Power | Yes |
| GND | SMS P1 | 8 | GND | BlueRetro Power | Yes |
| IO5 | SMS P1 | 2 | P1_D | Player 1 D1 | Yes |
| IO3 | SMS P1 | 1 | P1_U | Player 1 D0 | Yes |
| IO27 | SMS P1 | 9 | P1_TR | Player 1 D4 | Yes |
| IO26 | SMS P1 | 6 | P1_TL | Player 1 D5 | Yes |
| IO23 | SMS P1 | 4 | P1_R | Player 1 D3 | Yes |
| IO18 | SMS P1 | 3 | P1_L | Player 1 D2 | Yes |
| VIN | SMS P2 | 5 | 5V | BlueRetro Power | No |
| VIN | SMS P2 | 7 | 5V | BlueRetro Power | No |
| GND | SMS P2 | 8 | GND | BlueRetro Power | No |
| IO21 | SMS P2 | 2 | P2_D | Player 2 D1 | No |
| IO19 | SMS P2 | 1 | P2_U | Player 2 D0 | No |
| IO16 | SMS P2 | 9 | P2_TR | Player 2 D4 | No |
| IO33 | SMS P2 | 6 | P2_TL | Player 2 D5 | No |
| IO25 | SMS P2 | 4 | P2_R | Player 2 D3 | No |
| IO22 | SMS P2 | 3 | P2_L | Player 2 D2 | No |
- DB25 Male solder cup (x1) (DKPN: AE10984-ND PN: A-DS 25 LL/Z)
- 74AHCT1G125 SC70-5 (x7) (DKPN: 296-4709-1-ND PN: SN74AHCT1G125DCKR)
- 3.6K resistors (x3) (DKPN: S3.6KCACT-ND PN: RNMF14FTC3K60) (Required for PAL system only)
- DB25 Backshell (x1) (DKPN: 970-25BPE-ND PN: 970-025-010R011)
- Level shifter PCB (x1)
- NES controller plug (x2)
- Famicom controller plug (x1) (Optional)
https://github.com/darthcloud/BlueRetroHW/blob/master/DIY/NES.pdf
- Solder 74AHCT1G125 to footprint highlighted in red.
- Bridge HI side of jumper I39.
- Connect pad DIR3 & DIR1 to GND.
- For using PAL system, add 3.6K pull-ups to NES 5V (pin 5) on pads IO18, IO5 & IO32.
- Connect cords according to table below and pinout reference.
| PCB PAD | Cord | Pin | Name | Use | Required? |
|---|---|---|---|---|---|
| VIN | NES P1 | 5 | 5V | BlueRetro Power | Yes |
| GND | NES P1 | 1 | GND | BlueRetro Power | Yes |
| IO32 | NES P1 | 3 | OUT0 | Latch for all accessories | Yes |
| IO19 | NES P1 | 4 | P1_D0 | Player 1 / Four Score DATA | Yes |
| IO5 | NES P1 | 2 | P1_CUP | Player 1 / Four Score CLK | Yes |
| VIN | NES P2 | 5 | 5V | BlueRetro Power | No |
| GND | NES P2 | 1 | GND | BlueRetro Power | No |
| IO22 | NES P2 | 4 | P2_D0 | Player 2 / Four Score DATA | No |
| IO18 | NES P2 | 2 | P2_CUP | Player 2 / Four Score CLK | No |
| IO21 | FC_DB15 | 13 | P1_D1 | FC 4P adapter P3 DATA | No |
| IO25 | FC_DB15 | 7 | P2_D1 | FC 4P adapter P4 DATA | No |
Once in Genesis mode nothing will be output on the serial console as the TXD pin is used for multitap support.
- DB25 Male solder cup (x1) (DKPN: AE10984-ND PN: A-DS 25 LL/Z)
- 74AHCT1G125 SC70-5 (x14) (DKPN: 296-4709-1-ND PN: SN74AHCT1G125DCKR)
- 74AHCT1G126 SC70-5 (x3) (DKPN: 296-4711-1-ND PN: SN74AHCT1G126DCKR) (Optional only for multitap support)
- 74AHCT1G32 SC70-5 (x1) (DKPN: 296-4713-1-ND PN: SN74AHCT1G32DCKR) (Optional only for multitap support)
- DB25 Backshell (x1) (DKPN: 970-25BPE-ND PN: 970-025-010R011)
- Level shifter PCB (x1)
- Genesis DB9 controller plug (x2)
https://github.com/darthcloud/BlueRetroHW/blob/master/DIY/Genesis.pdf
- Solder 74AHCT1G125 to footprint highlighted in red.
- Solder 74AHCT1G126 to footprint highlighted in blue. (Optional only for multitap support)
- Solder 74AHCT1G32 to footprint highlighted in purple. (Optional only for multitap support)
- Bridge HI side of jumper I39.
- Connect pad DIR1 to GND.
- Connect pin 2 of DB25 connector to pad DIR2 & DIR3. (Optional only for multitap support, GND pad DIR2 & DIR3 otherwise)
- Connect pin 11 of DB25 to pad DIR4. (Optional only for multitap support, GND pad DIR4 otherwise)
- Connect pad IO32 to pad DIR0. (Optional only for multitap support, GND pad DIR0 otherwise)
- Connect cords according to table below and pinout reference.
| PCB PAD | Cord | Pin | Name | Use | Required? |
|---|---|---|---|---|---|
| VIN | GENESIS P1 | 5 | 5V | BlueRetro Power | Yes |
| GND | GENESIS P1 | 8 | GND | BlueRetro Power | Yes |
| IO5 | GENESIS P1 | 2 | P1_D | Player 1 D1 | Yes |
| IO3 | GENESIS P1 | 1 | P1_U | Player 1 D0 | Yes |
| I35 | GENESIS P1 | 7 | P1_TH | Player 1 CTRL | Yes |
| IO27 | GENESIS P1 | 9 | P1_TR | Player 1 D4/CTRL | Yes |
| IO26 | GENESIS P1 | 6 | P1_TL | Player 1 D5/CTRL | Yes |
| IO23 | GENESIS P1 | 4 | P1_R | Player 1 D3 | Yes |
| IO18 | GENESIS P1 | 3 | P1_L | Player 1 D2 | Yes |
| VIN | GENESIS P2 | 5 | 5V | BlueRetro Power | No |
| GND | GENESIS P2 | 8 | GND | BlueRetro Power | No |
| IO21 | GENESIS P2 | 2 | P2_D | Player 2 D1 | No |
| IO19 | GENESIS P2 | 1 | P2_U | Player 2 D0 | No |
| I36 | GENESIS P2 | 7 | P2_TH | Player 2 CTRL | No |
| IO16 | GENESIS P2 | 9 | P2_TR | Player 2 D4/CTRL | No |
| IO33 | GENESIS P2 | 6 | P2_TL | Player 2 D5/CTRL | No |
| IO25 | GENESIS P2 | 4 | P2_R | Player 2 D3 | No |
| IO22 | GENESIS P2 | 3 | P2_L | Player 2 D2 | No |
- DB25 Male solder cup (x1) (DKPN: AE10984-ND PN: A-DS 25 LL/Z)
- 74AHCT1G125 SC70-5 (x9) (DKPN: 296-4709-1-ND PN: SN74AHCT1G125DCKR)
- 3.6K resistors (x5) (DKPN: S3.6KCACT-ND PN: RNMF14FTC3K60) (Required for PAL system only)
- DB25 Backshell (x1) (DKPN: 970-25BPE-ND PN: 970-025-010R011)
- Level shifter PCB (x1)
- SNES controller plug (x2) (For multitap support 7 conductor are required, get a 3rd SNES extension for pin donation and use cable from PSX/Genesis/Saturn for the extra wires)
https://github.com/darthcloud/BlueRetroHW/blob/master/DIY/SNES.pdf
- Solder 74AHCT1G125 to footprint highlighted in red.
- Bridge LO side of jumper I39.
- Connect pad DIR3 & DIR1 to GND.
- For using PAL system, add 3.6K pull-ups to SNES 5V (pin 1) on pads IO23, IO18, IO5, IO32 & IO26.
- Connect cords according to table below and pinout reference.
| PCB PAD | Cord | Pin | Name | Use | Required? |
|---|---|---|---|---|---|
| VIN | SNES P1 | 1 | 5V | BlueRetro Power | Yes |
| GND | SNES P1 | 7 | GND | BlueRetro Power | Yes |
| IO5 | SNES P1 | 2 | P1_CLK | Player 1 / Multitap 1 CLK | Yes |
| IO32 | SNES P1 | 3 | LATCH | Latch for all accessories | Yes |
| IO19 | SNES P1 | 4 | P1_D0 | Player 1 / Multitap 1 DATA | Yes |
| IO21 | SNES P1 | 5 | P1_D1 | Multitap 1 DATA | No |
| IO23 | SNES P1 | 6 | P1_SEL | Multitap 1 CTRL | No |
| VIN | SNES P2 | 1 | 5V | BlueRetro Power | No |
| GND | SNES P2 | 7 | GND | BlueRetro Power | No |
| IO18 | SNES P2 | 2 | P2_CLK | Player 2 / Multitap 2 CLK | No |
| IO22 | SNES P2 | 4 | P2_D0 | Player 2 / Multitap 2 DATA | No |
| IO25 | SNES P2 | 5 | P2_D1 | Multitap 2 DATA | No |
| IO26 | SNES P2 | 6 | P2_SEL | Multitap 2 CTRL | No |
- DB25 Male solder cup (x1) (DKPN: AE10984-ND PN: A-DS 25 LL/Z)
- 74AHCT1G125 SC70-5 (x14) (DKPN: 296-4709-1-ND PN: SN74AHCT1G125DCKR)
- DB25 Backshell (x1) (DKPN: 970-25BPE-ND PN: 970-025-010R011)
- Level shifter PCB (x1)
- Saturn controller plug (x2)
https://github.com/darthcloud/BlueRetroHW/blob/master/DIY/Saturn.pdf
- Solder 74AHCT1G125 to footprint highlighted in red.
- Bridge LO side of jumper I39.
- Connect pad DIR0, DIR2, DIR1 & DIR4 to GND.
- Connect cords according to table below and pinout reference.
| PCB PAD | Cord | Pin | Name | Use | Required? |
|---|---|---|---|---|---|
| VIN | SATURN P1 | 1 | 5V | BlueRetro Power | Yes |
| GND | SATURN P1 | 9 | GND | BlueRetro Power | Yes |
| IO5 | SATURN P1 | 2 | P1_D | Player 1 D1 | Yes |
| IO3 | SATURN P1 | 3 | P1_U | Player 1 D0 | Yes |
| I35 | SATURN P1 | 4 | P1_TH | Player 1 CTRL | Yes |
| IO27 | SATURN P1 | 5 | P1_TR | Player 1 CTRL | Yes |
| IO26 | SATURN P1 | 6 | P1_TL | Player 1 CTRL | Yes |
| IO23 | SATURN P1 | 7 | P1_R | Player 1 D3 | Yes |
| IO18 | SATURN P1 | 8 | P1_L | Player 1 D2 | Yes |
| VIN | SATURN P2 | 1 | 5V | BlueRetro Power | No |
| GND | SATURN P2 | 9 | GND | BlueRetro Power | No |
| IO21 | SATURN P2 | 2 | P2_D | Player 2 D1 | No |
| IO19 | SATURN P2 | 3 | P2_U | Player 2 D0 | No |
| I36 | SATURN P2 | 4 | P2_TH | Player 2 CTRL | No |
| IO16 | SATURN P2 | 5 | P2_TR | Player 2 CTRL | No |
| IO33 | SATURN P2 | 6 | P2_TL | Player 2 CTRL | No |
| IO25 | SATURN P2 | 7 | P2_R | Player 2 D3 | No |
| IO22 | SATURN P2 | 8 | P2_L | Player 2 D2 | No |
- DB25 Male solder cup (x1) (DKPN: AE10984-ND PN: A-DS 25 LL/Z)
- DB25 Backshell (x1) (DKPN: 970-25BPE-ND PN: 970-025-010R011)
- 74AHCT1G125 SC70-5 (x1) (DKPN: 296-4709-1-ND PN: SN74AHCT1G125DCKR)
- Step Up 5V (x1) (DKPN: 296-24519-1-ND PN: TPS61240DRVT)
- Inductor (x1) (DKPN: 490-4026-1-ND PN: LQM21FN1R0N00D)
- RS485 PHY (x1) (DKPN: 296-50395-1-ND PN: THVD1450DR)
- Resistor 10K (x2) (DKPN: 311-10.0KLRCT-ND PN: RC0402FR-0710KL)
- Capacitor 0.1u (x1) (DKPN: 490-6328-1-ND PN: GRM155R71C104KA88J)
- Capacitor 2.2u (x1) (DKPN: 1276-1085-1-ND PN: CL10A225KP8NNNC)
- Capacitor 4.7u (x1) (DKPN: 1276-1044-1-ND PN: CL10A475KP8NNNC)
- JVS PCB (x1)
- USB-A plug (x1)
https://github.com/darthcloud/BlueRetroHW/blob/master/Cables/jvs/jvs.pdf
- PCB jumper are already set nothing to do.
- Do not install R4, R3 & D1.
- Connect cords according to table below and pinout reference.
| PCB PAD | Cord | Pin | Name | Use | Required? |
|---|---|---|---|---|---|
| SENSE (1-VBUS) | USB | 1 | SENSE | JVS Sense | Yes |
| B (2-D-) | USB | 2 | B | JVS RS485 Data- | Yes |
| A (3-D+) | USB | 3 | A | JVS RS485 Data+ | Yes |
| GND (4-GND) | USB | 4 | GND | BlueRetro Power ref | Yes |
- DB25 Male solder cup (x1) (DKPN: AE10984-ND PN: A-DS 25 LL/Z)
- DB25 Backshell (x1) (DKPN: 970-25BPE-ND PN: 970-025-010R011)
- Passthrough PCB (x1)
- N64 controller plug (x4)
https://github.com/darthcloud/BlueRetroHW/blob/master/DIY/N64.pdf
- Bridge HI side of jumper I39.
- Connect cords according to table below and pinout reference.
| PCB PAD | Cord | Pin | Name | Use | Required? |
|---|---|---|---|---|---|
| VIN | N64 P1 | 1 | 3.3V | BlueRetro Power | Yes |
| IO19 | N64 P1 | 2 | P1_D | Player 1 DATA | Yes |
| GND | N64 P1 | 3 | GND | BlueRetro Power | Yes |
| VIN | N64 P2 | 1 | 3.3V | BlueRetro Power | No |
| IO5 | N64 P2 | 2 | P2_D | Player 2 DATA | No |
| GND | N64 P2 | 3 | GND | BlueRetro Power | No |
| VIN | N64 P3 | 1 | 3.3V | BlueRetro Power | No |
| IO26 | N64 P3 | 2 | P3_D | Player 3 DATA | No |
| GND | N64 P3 | 3 | GND | BlueRetro Power | No |
| VIN | N64 P4 | 1 | 3.3V | BlueRetro Power | No |
| IO27 | N64 P4 | 2 | P4_D | Player 4 DATA | No |
| GND | N64 P4 | 3 | GND | BlueRetro Power | No |
- DB25 Male solder cup (x1) (DKPN: AE10984-ND PN: A-DS 25 LL/Z)
- DB25 Backshell (x1) (DKPN: 970-25BPE-ND PN: 970-025-010R011)
- Passthrough PCB (x1)
- Dreamcast controller plug (x4)
https://github.com/darthcloud/BlueRetroHW/blob/master/DIY/Dreamcast.pdf
- Bridge HI side of jumper I39.
- Connect cords according to table below and pinout reference.
| PCB PAD | Cord | Pin | Name | Use | Required? |
|---|---|---|---|---|---|
| VIN | DC P1 | 2 | 5V | BlueRetro Power | Yes |
| IO21 | DC P1 | 1 | P1_D0 | Player 1 DATA0 | Yes |
| IO22 | DC P1 | 5 | P1_D1 | Player 1 DATA1 | Yes |
| GND | DC P1 | 3, 4, SH | GND | BlueRetro Power | Yes |
| VIN | DC P2 | 2 | 5V | BlueRetro Power | No |
| IO3 | DC P2 | 1 | P2_D0 | Player 2 DATA0 | No |
| IO5 | DC P2 | 5 | P2_D1 | Player 2 DATA1 | No |
| GND | DC P2 | 3, 4, SH | GND | BlueRetro Power | No |
| VIN | DC P3 | 2 | 5V | BlueRetro Power | No |
| IO18 | DC P3 | 1 | P3_D0 | Player 3 DATA0 | No |
| IO23 | DC P3 | 5 | P3_D1 | Player 3 DATA1 | No |
| GND | DC P3 | 3, 4, SH | GND | BlueRetro Power | No |
| VIN | DC P4 | 2 | 5V | BlueRetro Power | No |
| IO26 | DC P4 | 1 | P4_D0 | Player 4 DATA0 | No |
| IO27 | DC P4 | 5 | P4_D1 | Player 4 DATA1 | No |
| GND | DC P4 | 3, 4, SH | GND | BlueRetro Power | No |
- DB25 Male solder cup (x1) (DKPN: AE10984-ND PN: A-DS 25 LL/Z)
- DB25 Backshell (x1) (DKPN: 970-25BPE-ND PN: 970-025-010R011)
- Passthrough PCB (x1)
- GameCube controller plug (x4)
https://github.com/darthcloud/BlueRetroHW/blob/master/DIY/GameCube.pdf
- Bridge LO side of jumper I39.
- Connect cords according to table below and pinout reference.
| PCB PAD | Cord | Pin | Name | Use | Required? |
|---|---|---|---|---|---|
| VIN | GC P1 | 1 | 5V | BlueRetro Power | Yes |
| IO19 | GC P1 | 2 | P1_D | Player 1 DATA | Yes |
| GND | GC P1 | 3, 4, SH | GND | BlueRetro Power | Yes |
| VIN | GC P2 | 1 | 5V | BlueRetro Power | No |
| IO5 | GC P2 | 2 | P2_D | Player 2 DATA | No |
| GND | GC P2 | 3, 4, SH | GND | BlueRetro Power | No |
| VIN | GC P3 | 1 | 5V | BlueRetro Power | No |
| IO26 | GC P3 | 2 | P3_D | Player 3 DATA | No |
| GND | GC P3 | 3, 4, SH | GND | BlueRetro Power | No |
| VIN | GC P4 | 1 | 5V | BlueRetro Power | No |
| IO27 | GC P4 | 2 | P4_D | Player 4 DATA | No |
| GND | GC P4 | 3, 4, SH | GND | BlueRetro Power | No |