MasterChefV2.sol

// SPDX-License-Identifier: MIT

// Special Thanks to @BoringCrypto for his ideas and patience

pragma solidity 0.6.12;
pragma experimental ABIEncoderV2;

// https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/utils/math/SignedSafeMath.sol
library SignedSafeMath {
    int256 constant private _INT256_MIN = -2**255;

    /**
     * @dev Returns the multiplication of two signed integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(int256 a, int256 b) internal pure returns (int256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        require(!(a == -1 && b == _INT256_MIN), "SignedSafeMath: multiplication overflow");

        int256 c = a * b;
        require(c / a == b, "SignedSafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two signed integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(int256 a, int256 b) internal pure returns (int256) {
        require(b != 0, "SignedSafeMath: division by zero");
        require(!(b == -1 && a == _INT256_MIN), "SignedSafeMath: division overflow");

        int256 c = a / b;

        return c;
    }

    /**
     * @dev Returns the subtraction of two signed integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(int256 a, int256 b) internal pure returns (int256) {
        int256 c = a - b;
        require((b >= 0 && c <= a) || (b < 0 && c > a), "SignedSafeMath: subtraction overflow");

        return c;
    }

    /**
     * @dev Returns the addition of two signed integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(int256 a, int256 b) internal pure returns (int256) {
        int256 c = a + b;
        require((b >= 0 && c >= a) || (b < 0 && c < a), "SignedSafeMath: addition overflow");

        return c;
    }

    function toUInt256(int256 a) internal pure returns (uint256) {
        require(a >= 0, "Integer < 0");
        return uint256(a);
    }
}

/// @notice A library for performing overflow-/underflow-safe math,
/// updated with awesomeness from of DappHub (https://github.com/dapphub/ds-math).
library BoringMath {
    function add(uint256 a, uint256 b) internal pure returns (uint256 c) {
        require((c = a + b) >= b, "BoringMath: Add Overflow");
    }

    function sub(uint256 a, uint256 b) internal pure returns (uint256 c) {
        require((c = a - b) <= a, "BoringMath: Underflow");
    }

    function mul(uint256 a, uint256 b) internal pure returns (uint256 c) {
        require(b == 0 || (c = a * b) / b == a, "BoringMath: Mul Overflow");
    }

    function to128(uint256 a) internal pure returns (uint128 c) {
        require(a <= uint128(-1), "BoringMath: uint128 Overflow");
        c = uint128(a);
    }

    function to64(uint256 a) internal pure returns (uint64 c) {
        require(a <= uint64(-1), "BoringMath: uint64 Overflow");
        c = uint64(a);
    }

    function to32(uint256 a) internal pure returns (uint32 c) {
        require(a <= uint32(-1), "BoringMath: uint32 Overflow");
        c = uint32(a);
    }
}

/// @notice A library for performing overflow-/underflow-safe addition and subtraction on uint128.
library BoringMath128 {
    function add(uint128 a, uint128 b) internal pure returns (uint128 c) {
        require((c = a + b) >= b, "BoringMath: Add Overflow");
    }

    function sub(uint128 a, uint128 b) internal pure returns (uint128 c) {
        require((c = a - b) <= a, "BoringMath: Underflow");
    }
}


contract BoringOwnableData {
    address public owner;
    address public pendingOwner;
}

contract BoringOwnable is BoringOwnableData {
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /// @notice `owner` defaults to msg.sender on construction.
    constructor() public {
        owner = msg.sender;
        emit OwnershipTransferred(address(0), msg.sender);
    }

    /// @notice Transfers ownership to `newOwner`. Either directly or claimable by the new pending owner.
    /// Can only be invoked by the current `owner`.
    /// @param newOwner Address of the new owner.
    /// @param direct True if `newOwner` should be set immediately. False if `newOwner` needs to use `claimOwnership`.
    /// @param renounce Allows the `newOwner` to be `address(0)` if `direct` and `renounce` is True. Has no effect otherwise.
    function transferOwnership(
        address newOwner,
        bool direct,
        bool renounce
    ) public onlyOwner {
        if (direct) {
            // Checks
            require(newOwner != address(0) || renounce, "Ownable: zero address");

            // Effects
            emit OwnershipTransferred(owner, newOwner);
            owner = newOwner;
            pendingOwner = address(0);
        } else {
            // Effects
            pendingOwner = newOwner;
        }
    }

    /// @notice Needs to be called by `pendingOwner` to claim ownership.
    function claimOwnership() public {
        address _pendingOwner = pendingOwner;

        // Checks
        require(msg.sender == _pendingOwner, "Ownable: caller != pending owner");

        // Effects
        emit OwnershipTransferred(owner, _pendingOwner);
        owner = _pendingOwner;
        pendingOwner = address(0);
    }

    /// @notice Only allows the `owner` to execute the function.
    modifier onlyOwner() {
        require(msg.sender == owner, "Ownable: caller is not the owner");
        _;
    }
}

interface IERC20 {
    function totalSupply() external view returns (uint256);

    function balanceOf(address account) external view returns (uint256);

    function allowance(address owner, address spender) external view returns (uint256);

    function approve(address spender, uint256 amount) external returns (bool);

    event Transfer(address indexed from, address indexed to, uint256 value);
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /// @notice EIP 2612
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;
}


library BoringERC20 {
    bytes4 private constant SIG_SYMBOL = 0x95d89b41; // symbol()
    bytes4 private constant SIG_NAME = 0x06fdde03; // name()
    bytes4 private constant SIG_DECIMALS = 0x313ce567; // decimals()
    bytes4 private constant SIG_TRANSFER = 0xa9059cbb; // transfer(address,uint256)
    bytes4 private constant SIG_TRANSFER_FROM = 0x23b872dd; // transferFrom(address,address,uint256)

    function returnDataToString(bytes memory data) internal pure returns (string memory) {
        if (data.length >= 64) {
            return abi.decode(data, (string));
        } else if (data.length == 32) {
            uint8 i = 0;
            while(i < 32 && data[i] != 0) {
                i++;
            }
            bytes memory bytesArray = new bytes(i);
            for (i = 0; i < 32 && data[i] != 0; i++) {
                bytesArray[i] = data[i];
            }
            return string(bytesArray);
        } else {
            return "???";
        }
    }

    /// @notice Provides a safe ERC20.symbol version which returns '???' as fallback string.
    /// @param token The address of the ERC-20 token contract.
    /// @return (string) Token symbol.
    function safeSymbol(IERC20 token) internal view returns (string memory) {
        (bool success, bytes memory data) = address(token).staticcall(abi.encodeWithSelector(SIG_SYMBOL));
        return success ? returnDataToString(data) : "???";
    }

    /// @notice Provides a safe ERC20.name version which returns '???' as fallback string.
    /// @param token The address of the ERC-20 token contract.
    /// @return (string) Token name.
    function safeName(IERC20 token) internal view returns (string memory) {
        (bool success, bytes memory data) = address(token).staticcall(abi.encodeWithSelector(SIG_NAME));
        return success ? returnDataToString(data) : "???";
    }

    /// @notice Provides a safe ERC20.decimals version which returns '18' as fallback value.
    /// @param token The address of the ERC-20 token contract.
    /// @return (uint8) Token decimals.
    function safeDecimals(IERC20 token) internal view returns (uint8) {
        (bool success, bytes memory data) = address(token).staticcall(abi.encodeWithSelector(SIG_DECIMALS));
        return success && data.length == 32 ? abi.decode(data, (uint8)) : 18;
    }

    /// @notice Provides a safe ERC20.transfer version for different ERC-20 implementations.
    /// Reverts on a failed transfer.
    /// @param token The address of the ERC-20 token.
    /// @param to Transfer tokens to.
    /// @param amount The token amount.
    function safeTransfer(
        IERC20 token,
        address to,
        uint256 amount
    ) internal {
        (bool success, bytes memory data) = address(token).call(abi.encodeWithSelector(SIG_TRANSFER, to, amount));
        require(success && (data.length == 0 || abi.decode(data, (bool))), "BoringERC20: Transfer failed");
    }

    /// @notice Provides a safe ERC20.transferFrom version for different ERC-20 implementations.
    /// Reverts on a failed transfer.
    /// @param token The address of the ERC-20 token.
    /// @param from Transfer tokens from.
    /// @param to Transfer tokens to.
    /// @param amount The token amount.
    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 amount
    ) internal {
        (bool success, bytes memory data) = address(token).call(abi.encodeWithSelector(SIG_TRANSFER_FROM, from, to, amount));
        require(success && (data.length == 0 || abi.decode(data, (bool))), "BoringERC20: TransferFrom failed");
    }
}

contract BaseBoringBatchable {
    /// @dev Helper function to extract a useful revert message from a failed call.
    /// If the returned data is malformed or not correctly abi encoded then this call can fail itself.
    function _getRevertMsg(bytes memory _returnData) internal pure returns (string memory) {
        // If the _res length is less than 68, then the transaction failed silently (without a revert message)
        if (_returnData.length < 68) return "Transaction reverted silently";

        assembly {
            // Slice the sighash.
            _returnData := add(_returnData, 0x04)
        }
        return abi.decode(_returnData, (string)); // All that remains is the revert string
    }

    /// @notice Allows batched call to self (this contract).
    /// @param calls An array of inputs for each call.
    /// @param revertOnFail If True then reverts after a failed call and stops doing further calls.
    /// @return successes An array indicating the success of a call, mapped one-to-one to `calls`.
    /// @return results An array with the returned data of each function call, mapped one-to-one to `calls`.
    // F1: External is ok here because this is the batch function, adding it to a batch makes no sense
    // F2: Calls in the batch may be payable, delegatecall operates in the same context, so each call in the batch has access to msg.value
    // C3: The length of the loop is fully under user control, so can't be exploited
    // C7: Delegatecall is only used on the same contract, so it's safe
    function batch(bytes[] calldata calls, bool revertOnFail) external payable returns (bool[] memory successes, bytes[] memory results) {
        successes = new bool[](calls.length);
        results = new bytes[](calls.length);
        for (uint256 i = 0; i < calls.length; i++) {
            (bool success, bytes memory result) = address(this).delegatecall(calls[i]);
            require(success || !revertOnFail, _getRevertMsg(result));
            successes[i] = success;
            results[i] = result;
        }
    }
}

contract BoringBatchable is BaseBoringBatchable {
    /// @notice Call wrapper that performs `ERC20.permit` on `token`.
    /// Lookup `IERC20.permit`.
    // F6: Parameters can be used front-run the permit and the user's permit will fail (due to nonce or other revert)
    //     if part of a batch this could be used to grief once as the second call would not need the permit
    function permitToken(
        IERC20 token,
        address from,
        address to,
        uint256 amount,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) public {
        token.permit(from, to, amount, deadline, v, r, s);
    }
}

interface IRewarder {
    using BoringERC20 for IERC20;
    function onSushiReward(uint256 pid, address user, address recipient, uint256 sushiAmount, uint256 newLpAmount) external;
    function pendingTokens(uint256 pid, address user, uint256 sushiAmount) external view returns (IERC20[] memory, uint256[] memory);
}

interface IMasterChef {
    using BoringERC20 for IERC20;
    struct UserInfo {
        uint256 amount;     // How many LP tokens the user has provided.
        uint256 rewardDebt; // Reward debt. See explanation below.
    }

    struct PoolInfo {
        IERC20 lpToken;           // Address of LP token contract.
        uint256 allocPoint;       // How many allocation points assigned to this pool. MORPH to distribute per block.
        uint256 lastRewardTime;  // Last block number that MORPH distribution occurs.
        uint256 accSushiPerShare; // Accumulated MORPH per share, times 1e12. See below.
    }

    function poolInfo(uint256 pid) external view returns (IMasterChef.PoolInfo memory);
    function totalAllocPoint() external view returns (uint256);
    function deposit(uint256 _pid, uint256 _amount) external;
}

/// @notice The (older) MasterChef contract gives out a constant number of MORPH tokens per block.
/// It is the only address with minting rights for MORPH.
/// The idea for this MasterChef V2 (MCV2) contract is therefore to be the owner of a dummy token
/// that is deposited into the MasterChef V1 (MCV1) contract.
/// The allocation point for this pool on MCV1 is the total allocation point for all pools that receive double incentives.
contract MasterChefV2 is BoringOwnable, BoringBatchable {
    using BoringMath for uint256;
    using BoringMath128 for uint128;
    using BoringERC20 for IERC20;
    using SignedSafeMath for int256;

    /// @notice Info of each MCV2 user.
    /// `amount` LP token amount the user has provided.
    /// `rewardDebt` The amount of MORPH entitled to the user.
    struct UserInfo {
        uint256 amount;
        int256 rewardDebt;
    }

    /// @notice Info of each MCV2 pool.
    /// `allocPoint` The amount of allocation points assigned to the pool.
    /// Also known as the amount of MORPH to distribute per block.
    struct PoolInfo {
        uint128 accSushiPerShare;
        uint64 lastRewardTime;
        uint64 allocPoint;
    }

    /// @notice Address of MCV1 contract.
    IMasterChef public immutable MASTER_CHEF;
    /// @notice Address of MORPH contract.
    IERC20 public immutable MORPH;
    /// @notice The index of MCV2 master pool in MCV1.
    uint256 public immutable MASTER_PID;
    /// @notice Info of each MCV2 pool.
    PoolInfo[] public poolInfo;
    /// @notice Address of the LP token for each MCV2 pool.
    IERC20[] public lpToken;
    /// @notice Address of each `IRewarder` contract in MCV2.
    IRewarder[] public rewarder;

    /// @notice Info of each user that stakes LP tokens.
    mapping (uint256 => mapping (address => UserInfo)) public userInfo;
    /// @dev Tokens added
    mapping (address => bool) public addedTokens;
    /// @dev Total allocation points. Must be the sum of all allocation points in all pools.
    uint256 public totalAllocPoint;

    uint256 private constant MASTERCHEF_MORPH_PER_SECOND = 5e17;
    uint256 private constant ACC_SUSHI_PRECISION = 1e12;

    event Deposit(address indexed user, uint256 indexed pid, uint256 amount, address indexed to);
    event Withdraw(address indexed user, uint256 indexed pid, uint256 amount, address indexed to);
    event EmergencyWithdraw(address indexed user, uint256 indexed pid, uint256 amount, address indexed to);
    event Harvest(address indexed user, uint256 indexed pid, uint256 amount);
    event LogPoolAddition(uint256 indexed pid, uint256 allocPoint, IERC20 indexed lpToken, IRewarder indexed rewarder);
    event LogSetPool(uint256 indexed pid, uint256 allocPoint, IRewarder indexed rewarder, bool overwrite);
    event LogUpdatePool(uint256 indexed pid, uint64 lastRewardTime, uint256 lpSupply, uint256 accSushiPerShare);
    event LogInit();

    /// @param _MASTER_CHEF The SushiSwap MCV1 contract address.
    /// @param _morph The MORPH token contract address.
    /// @param _MASTER_PID The pool ID of the dummy token on the base MCV1 contract.
    constructor(IMasterChef _MASTER_CHEF, IERC20 _morph, uint256 _MASTER_PID) public {
        MASTER_CHEF = _MASTER_CHEF;
        MORPH = _morph;
        MASTER_PID = _MASTER_PID;
    }

    /// @notice Deposits a dummy token to `MASTER_CHEF` MCV1. This is required because MCV1 holds the minting rights for MORPH.
    /// Any balance of transaction sender in `dummyToken` is transferred.
    /// The allocation point for the pool on MCV1 is the total allocation point for all pools that receive double incentives.
    /// @param dummyToken The address of the ERC-20 token to deposit into MCV1.
    function init(IERC20 dummyToken) external {
        uint256 balance = dummyToken.balanceOf(msg.sender);
        require(balance != 0, "MasterChefV2: Balance must exceed 0");
        dummyToken.safeTransferFrom(msg.sender, address(this), balance);
        dummyToken.approve(address(MASTER_CHEF), balance);
        MASTER_CHEF.deposit(MASTER_PID, balance);
        emit LogInit();
    }

    /// @notice Returns the number of MCV2 pools.
    function poolLength() public view returns (uint256 pools) {
        pools = poolInfo.length;
    }

    /// @notice Add a new LP to the pool. Can only be called by the owner.
    /// DO NOT add the same LP token more than once. Rewards will be messed up if you do.
    /// @param allocPoint AP of the new pool.
    /// @param _lpToken Address of the LP ERC-20 token.
    /// @param _rewarder Address of the rewarder delegate.
    function add(uint256 allocPoint, IERC20 _lpToken, IRewarder _rewarder) public onlyOwner {
        require(addedTokens[address(_lpToken)] == false, "Token already added");
        totalAllocPoint = totalAllocPoint.add(allocPoint);
        lpToken.push(_lpToken);
        rewarder.push(_rewarder);

        poolInfo.push(PoolInfo({
            allocPoint: allocPoint.to64(),
            lastRewardTime: block.timestamp.to64(),
            accSushiPerShare: 0
        }));
        addedTokens[address(_lpToken)] = true;
        emit LogPoolAddition(lpToken.length.sub(1), allocPoint, _lpToken, _rewarder);
    }

    /// @notice Update the given pool's MORPH allocation point and `IRewarder` contract. Can only be called by the owner.
    /// @param _pid The index of the pool. See `poolInfo`.
    /// @param _allocPoint New AP of the pool.
    /// @param _rewarder Address of the rewarder delegate.
    /// @param overwrite True if _rewarder should be `set`. Otherwise `_rewarder` is ignored.
    function set(uint256 _pid, uint256 _allocPoint, IRewarder _rewarder, bool overwrite) public onlyOwner {
        totalAllocPoint = totalAllocPoint.sub(poolInfo[_pid].allocPoint).add(_allocPoint);
        poolInfo[_pid].allocPoint = _allocPoint.to64();
        if (overwrite) { rewarder[_pid] = _rewarder; }
        emit LogSetPool(_pid, _allocPoint, overwrite ? _rewarder : rewarder[_pid], overwrite);
    }

    /// @notice View function to see pending MORPH on frontend.
    /// @param _pid The index of the pool. See `poolInfo`.
    /// @param _user Address of user.
    /// @return pending MORPH reward for a given user.
    function pendingSushi(uint256 _pid, address _user) external view returns (uint256 pending) {
        PoolInfo memory pool = poolInfo[_pid];
        UserInfo storage user = userInfo[_pid][_user];
        uint256 accSushiPerShare = pool.accSushiPerShare;
        uint256 lpSupply = lpToken[_pid].balanceOf(address(this));
        if (block.timestamp > pool.lastRewardTime && lpSupply != 0) {
            uint256 time = block.timestamp.sub(pool.lastRewardTime);
            uint256 sushiReward = time.mul(sushiPerSecond()).mul(pool.allocPoint) / totalAllocPoint;
            accSushiPerShare = accSushiPerShare.add(sushiReward.mul(ACC_SUSHI_PRECISION) / lpSupply);
        }
        pending = int256(user.amount.mul(accSushiPerShare) / ACC_SUSHI_PRECISION).sub(user.rewardDebt).toUInt256();
    }

    /// @notice Update reward variables for all pools. Be careful of gas spending!
    /// @param pids Pool IDs of all to be updated. Make sure to update all active pools.
    function massUpdatePools(uint256[] calldata pids) external {
        uint256 len = pids.length;
        for (uint256 i = 0; i < len; ++i) {
            updatePool(pids[i]);
        }
    }

    /// @notice Calculates and returns the `amount` of MORPH per block.
    function sushiPerSecond() public view returns (uint256 amount) {
        amount = uint256(MASTERCHEF_MORPH_PER_SECOND)
            .mul(MASTER_CHEF.poolInfo(MASTER_PID).allocPoint) / MASTER_CHEF.totalAllocPoint();
    }

    /// @notice Update reward variables of the given pool.
    /// @param pid The index of the pool. See `poolInfo`.
    /// @return pool Returns the pool that was updated.
    function updatePool(uint256 pid) public returns (PoolInfo memory pool) {
        pool = poolInfo[pid];
        if (block.timestamp > pool.lastRewardTime) {
            uint256 lpSupply = lpToken[pid].balanceOf(address(this));
            if (lpSupply > 0) {
                uint256 time = block.timestamp.sub(pool.lastRewardTime);
                uint256 sushiReward = time.mul(sushiPerSecond()).mul(pool.allocPoint) / totalAllocPoint;
                pool.accSushiPerShare = pool.accSushiPerShare.add((sushiReward.mul(ACC_SUSHI_PRECISION) / lpSupply).to128());
            }
            pool.lastRewardTime = block.timestamp.to64();
            poolInfo[pid] = pool;
            emit LogUpdatePool(pid, pool.lastRewardTime, lpSupply, pool.accSushiPerShare);
        }
    }

    /// @notice Deposit LP tokens to MCV2 for MORPH allocation.
    /// @param pid The index of the pool. See `poolInfo`.
    /// @param amount LP token amount to deposit.
    /// @param to The receiver of `amount` deposit benefit.
    function deposit(uint256 pid, uint256 amount, address to) public {
        PoolInfo memory pool = updatePool(pid);
        UserInfo storage user = userInfo[pid][to];

        // Effects
        user.amount = user.amount.add(amount);
        user.rewardDebt = user.rewardDebt.add(int256(amount.mul(pool.accSushiPerShare) / ACC_SUSHI_PRECISION));

        // Interactions
        IRewarder _rewarder = rewarder[pid];
        if (address(_rewarder) != address(0)) {
            _rewarder.onSushiReward(pid, to, to, 0, user.amount);
        }

        lpToken[pid].safeTransferFrom(msg.sender, address(this), amount);

        emit Deposit(msg.sender, pid, amount, to);
    }

    /// @notice Withdraw LP tokens from MCV2.
    /// @param pid The index of the pool. See `poolInfo`.
    /// @param amount LP token amount to withdraw.
    /// @param to Receiver of the LP tokens.
    function withdraw(uint256 pid, uint256 amount, address to) public {
        PoolInfo memory pool = updatePool(pid);
        UserInfo storage user = userInfo[pid][msg.sender];

        // Effects
        user.rewardDebt = user.rewardDebt.sub(int256(amount.mul(pool.accSushiPerShare) / ACC_SUSHI_PRECISION));
        user.amount = user.amount.sub(amount);

        // Interactions
        IRewarder _rewarder = rewarder[pid];
        if (address(_rewarder) != address(0)) {
            _rewarder.onSushiReward(pid, msg.sender, to, 0, user.amount);
        }
        
        lpToken[pid].safeTransfer(to, amount);

        emit Withdraw(msg.sender, pid, amount, to);
    }

    /// @notice Harvest proceeds for transaction sender to `to`.
    /// @param pid The index of the pool. See `poolInfo`.
    /// @param to Receiver of MORPH rewards.
    function harvest(uint256 pid, address to) public {
        PoolInfo memory pool = updatePool(pid);
        UserInfo storage user = userInfo[pid][msg.sender];
        int256 accumulatedSushi = int256(user.amount.mul(pool.accSushiPerShare) / ACC_SUSHI_PRECISION);
        uint256 _pendingSushi = accumulatedSushi.sub(user.rewardDebt).toUInt256();

        // Effects
        user.rewardDebt = accumulatedSushi;

        // Interactions
        if (_pendingSushi != 0) {
            MORPH.safeTransfer(to, _pendingSushi);
        }
        
        IRewarder _rewarder = rewarder[pid];
        if (address(_rewarder) != address(0)) {
            _rewarder.onSushiReward( pid, msg.sender, to, _pendingSushi, user.amount);
        }

        emit Harvest(msg.sender, pid, _pendingSushi);
    }
    
    /// @notice Withdraw LP tokens from MCV2 and harvest proceeds for transaction sender to `to`.
    /// @param pid The index of the pool. See `poolInfo`.
    /// @param amount LP token amount to withdraw.
    /// @param to Receiver of the LP tokens and MORPH rewards.
    function withdrawAndHarvest(uint256 pid, uint256 amount, address to) public {
        PoolInfo memory pool = updatePool(pid);
        UserInfo storage user = userInfo[pid][msg.sender];
        int256 accumulatedSushi = int256(user.amount.mul(pool.accSushiPerShare) / ACC_SUSHI_PRECISION);
        uint256 _pendingSushi = accumulatedSushi.sub(user.rewardDebt).toUInt256();

        // Effects
        user.rewardDebt = accumulatedSushi.sub(int256(amount.mul(pool.accSushiPerShare) / ACC_SUSHI_PRECISION));
        user.amount = user.amount.sub(amount);
        
        // Interactions
        MORPH.safeTransfer(to, _pendingSushi);

        IRewarder _rewarder = rewarder[pid];
        if (address(_rewarder) != address(0)) {
            _rewarder.onSushiReward(pid, msg.sender, to, _pendingSushi, user.amount);
        }

        lpToken[pid].safeTransfer(to, amount);

        emit Withdraw(msg.sender, pid, amount, to);
        emit Harvest(msg.sender, pid, _pendingSushi);
    }

    /// @notice Harvests MORPH from `MASTER_CHEF` MCV1 and pool `MASTER_PID` to this MCV2 contract.
    function harvestFromMasterChef() public {
        MASTER_CHEF.deposit(MASTER_PID, 0);
    }

    /// @notice Withdraw without caring about rewards. EMERGENCY ONLY.
    /// @param pid The index of the pool. See `poolInfo`.
    /// @param to Receiver of the LP tokens.
    function emergencyWithdraw(uint256 pid, address to) public {
        UserInfo storage user = userInfo[pid][msg.sender];
        uint256 amount = user.amount;
        user.amount = 0;
        user.rewardDebt = 0;

        IRewarder _rewarder = rewarder[pid];
        if (address(_rewarder) != address(0)) {
            _rewarder.onSushiReward(pid, msg.sender, to, 0, 0);
        }

        // Note: transfer can fail or succeed if `amount` is zero.
        lpToken[pid].safeTransfer(to, amount);
        emit EmergencyWithdraw(msg.sender, pid, amount, to);
    }
}