ALTIGA-SSH-STATS-MIB

-- *------------------------------------------------------------------
-- * ALTIGA-SSH-STATS-MIB.my:  Altiga SSH Statistics MIB.
-- *
-- * Altiga Networks was acquired by Cisco Systems on March 29, 2000
-- *
-- * Copyright (c) 2002 by Cisco Systems, Inc.
-- * All rights reserved.
-- *
-- *------------------------------------------------------------------

ALTIGA-SSH-STATS-MIB DEFINITIONS ::= BEGIN

   IMPORTS
      MODULE-IDENTITY, OBJECT-TYPE, Counter32, Gauge32, Unsigned32, IpAddress,
          Integer32, TimeTicks
         FROM SNMPv2-SMI
      DisplayString
         FROM SNMPv2-TC
      EncryptionAlgorithm
              FROM ALTIGA-SESSION-STATS-MIB
      OBJECT-GROUP, MODULE-COMPLIANCE
         FROM SNMPv2-CONF
      alStatsSsh, alSshGroup
         FROM ALTIGA-MIB
      alSshMibModule
         FROM ALTIGA-GLOBAL-REG;

   altigaSshStatsMibModule MODULE-IDENTITY
      LAST-UPDATED   "200209051300Z"
      ORGANIZATION   "Cisco Systems, Inc."
      CONTACT-INFO
         "Cisco Systems
          170 W Tasman Drive
          San Jose, CA  95134
          USA

          Tel: +1 800 553-NETS
          E-mail: cs-cvpn3000@cisco.com"

      DESCRIPTION
         "The Altiga SSH Statistics MIB models counters and objects that are
          of management interest for SSH.
         
          Acronyms
          The following acronyms are used in this document:

            MIB:        Management Information Base

            SSH:        Secure Shell

         "

        REVISION "200209051300Z"
        DESCRIPTION
                "Added module compliance."

        REVISION "200207100000Z"
        DESCRIPTION
                "Updated with new header"

      ::= { alSshMibModule 2 }

-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- MIB Objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++

alStatsSshGlobal  OBJECT IDENTIFIER ::= { alStatsSsh 1 }

alSshStatsOctetsSent    OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "The number of octets sent."
   ::= { alStatsSshGlobal 1 }

alSshStatsOctetsRcvd    OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "The number of octets received."
   ::= { alStatsSshGlobal 2 }

alSshStatsPacketsSent      OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "The number of packets."
   ::= { alStatsSshGlobal 3 }

alSshStatsPacketsRcvd      OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "The number of packets received."
   ::= { alStatsSshGlobal 4 }

alSshStatsTotalSessions    OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "The total number of SSH sessions established."
   ::= { alStatsSshGlobal 5 }

alSshStatsActiveSessions   OBJECT-TYPE
   SYNTAX         Gauge32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "The number of active sessions."
   ::= { alStatsSshGlobal 6 }

alSshStatsMaxSessions      OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "The maximum number of active sessions that existed at one any time."
   ::= { alStatsSshGlobal 7 }


alSshStatsSessionTable     OBJECT-TYPE
   SYNTAX         SEQUENCE OF AlSshStatsSessionEntry
   MAX-ACCESS     not-accessible
   STATUS         current
   DESCRIPTION
          "List of active HTTP sessions."
   ::= { alStatsSsh 2 }

alSshStatsSessionEntry        OBJECT-TYPE
   SYNTAX         AlSshStatsSessionEntry
   MAX-ACCESS     not-accessible
   STATUS         current
   DESCRIPTION
          "An entry in the alSshStatsSessionTable."
   INDEX       { alSshStatsSessionIndex }
   ::= { alSshStatsSessionTable 1 }

AlSshStatsSessionEntry ::= SEQUENCE {
   alSshStatsSessionIndex           Integer32,
   alSshStatsSessionName            DisplayString,
   alSshStatsSessionIpAddr          IpAddress,
   alSshStatsSessionPort            Unsigned32,
   alSshStatsSessionStartTime       TimeTicks,
   alSshStatsSessionLoginTime       Unsigned32,
   alSshStatsSessionEncr            EncryptionAlgorithm,
   alSshStatsSessionOctetsSent      Counter32,
   alSshStatsSessionOctetsRcvd      Counter32,
   alSshStatsSessionPacketsSent     Counter32,
   alSshStatsSessionPacketsRcvd     Counter32
}

alSshStatsSessionIndex     OBJECT-TYPE
   SYNTAX         Integer32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "Index of this session."
   ::= { alSshStatsSessionEntry 1 }
   
alSshStatsSessionName      OBJECT-TYPE
   SYNTAX         DisplayString
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "Name of the administrator using this session."
   ::= { alSshStatsSessionEntry 2 }
   
alSshStatsSessionIpAddr OBJECT-TYPE
   SYNTAX         IpAddress
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "Remote IP address of this session.."
   ::= { alSshStatsSessionEntry 3 }
   
alSshStatsSessionPort      OBJECT-TYPE
   SYNTAX         Unsigned32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "Remote IP port address of this session.."
   ::= { alSshStatsSessionEntry 4 }
   
alSshStatsSessionStartTime OBJECT-TYPE
   SYNTAX         TimeTicks
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "Login time of this session."
   ::= { alSshStatsSessionEntry 5 }
   
alSshStatsSessionLoginTime OBJECT-TYPE
   SYNTAX         Unsigned32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "time_t value of the concentrator at the start of this session."
   ::= { alSshStatsSessionEntry 6 }
   
alSshStatsSessionEncr      OBJECT-TYPE
   SYNTAX         EncryptionAlgorithm
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "The type of encryption algorithm used for this session."
   ::= { alSshStatsSessionEntry 7 }
   
alSshStatsSessionOctetsSent   OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "Number of octets sent during this session."
   ::= { alSshStatsSessionEntry 8 }
   
alSshStatsSessionOctetsRcvd   OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "Number of octets received during this session."
   ::= { alSshStatsSessionEntry 9 }
   
alSshStatsSessionPacketsSent  OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "Number of packets sent during this session."
   ::= { alSshStatsSessionEntry 10 }
   
alSshStatsSessionPacketsRcvd  OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "Number of packets received during this session."
   ::= { alSshStatsSessionEntry 11 }
   
altigaSshStatsMibConformance OBJECT IDENTIFIER ::= { altigaSshStatsMibModule 1 }
altigaSshStatsMibCompliances OBJECT IDENTIFIER ::= { altigaSshStatsMibConformance 1 }

altigaSshStatsMibCompliance MODULE-COMPLIANCE
   STATUS         current
   DESCRIPTION
      "The compliance statement for agents which 
       implement the Altiga SSH Statistics MIB."
   MODULE
   MANDATORY-GROUPS { 
      altigaSshStatsGroup
   }
   ::= { altigaSshStatsMibCompliances 1 }

altigaSshStatsGroup OBJECT-GROUP
   OBJECTS
   {
      alSshStatsOctetsSent,
      alSshStatsOctetsRcvd,
      alSshStatsPacketsSent,
      alSshStatsPacketsRcvd,
      alSshStatsTotalSessions,
      alSshStatsActiveSessions,
      alSshStatsMaxSessions,
      alSshStatsSessionIndex,
      alSshStatsSessionName,
      alSshStatsSessionIpAddr,
      alSshStatsSessionPort,
      alSshStatsSessionStartTime,
      alSshStatsSessionLoginTime,
      alSshStatsSessionEncr,
      alSshStatsSessionOctetsSent,
      alSshStatsSessionOctetsRcvd,
      alSshStatsSessionPacketsSent,
      alSshStatsSessionPacketsRcvd
   }
   STATUS   current
   DESCRIPTION
          "The objects for SSH statistics."
   ::= { alSshGroup 2 }

END