Skip to content

Latest commit

 

History

History
163 lines (131 loc) · 7.52 KB

README_webassembly.md

File metadata and controls

163 lines (131 loc) · 7.52 KB
Raw

WebAssembly Support for Halide

Halide supports WebAssembly (Wasm) code generation from Halide using the LLVM backend.

As WebAssembly itself is still under active development, Halide's support has some limitations. Some of the most important:

  • We require using LLVM 11 or later for Wasm codegen; earlier versions of LLVM will not work.
  • Fixed-width SIMD (128 bit) can be enabled via Target::WasmSimd128.
  • Sign-extension operations can be enabled via Target::WasmSignExt.
  • Non-trapping float-to-int conversions can be enabled via Target::WasmSatFloatToInt.
  • Threads are not available yet. We'd like to support this in the future but don't yet have a timeline.
  • Halide's JIT for Wasm is extremely limited and really useful only for internal testing purposes.

Additional Tooling Requirements:

  • In additional to the usual install of LLVM and clang, you'll need lld. All should be at least v11 or later (codegen will be improved under LLVM v12/trunk, at least as of July 2020).
  • Locally-installed version of Emscripten, 1.39.19+

Note that for all of the above, earlier versions might work, but have not been tested.

AOT Limitations

Halide outputs a Wasm object (.o) or static library (.a) file, much like any other architecture; to use it, of course, you must link it to suitable calling code. Additionally, you must link to something that provides an implementation of libc; as a practical matter, this means using the Emscripten tool to do your linking, as it provides the most complete such implementation we're aware of at this time.

  • Halide ahead-of-time tests assume/require that you have Emscripten installed and available on your system, with the EMSDK environment variable set properly.

JIT Limitations

It's important to reiterate that the WebAssembly JIT mode is not (and will never be) appropriate for anything other than limited self tests, for a number of reasons:

  • It actually uses an interpreter (from the WABT toolkit [https://github.com/WebAssembly/wabt]) to execute wasm bytecode; not surprisingly, this can be very slow.
  • Wasm effectively runs in a private, 32-bit memory address space; while the host has access to that entire space, the reverse is not true, and thus any define_extern calls require copying all halide_buffer_t data across the Wasm<->host boundary in both directions. This has severe implications for existing benchmarks, which don't currently attempt to account for this extra overhead. (This could possibly be improved by modeling the Wasm JIT's buffer support as a device model that would allow lazy copy-on-demand.)
  • Host functions used via define_extern or HalideExtern cannot accept or return values that are pointer types or 64-bit integer types; this includes things like const char * and user_context. Fixing this is tractable, but is currently omitted as the fix is nontrivial and the tests that are affected are mostly non-critical. (Note that halide_buffer_t* is explicitly supported as a special case, however.)
  • Threading isn't supported at all (yet); all parallel() schedules will be run serially.
  • The .async() directive isn't supported at all, not even in serial-emulation mode.
  • You can't use Param<void *> (or any other arbitrary pointer type) with the Wasm jit.
  • You can't use Func.debug_to_file(), Func.set_custom_do_par_for(), Func.set_custom_do_task(), or Func.set_custom_allocator().
  • The implementation of malloc() used by the JIT is incredibly simpleminded and unsuitable for anything other than the most basic of tests.
  • GPU usage (or any buffer usage that isn't 100% host-memory) isn't supported at all yet. (This should be doable, just omitted for now.)

Note that while some of these limitations may be improved in the future, some are effectively intrinsic to the nature of this problem. Realistically, this JIT implementation is intended solely for running Halide self-tests (and even then, a number of them are fundamentally impractical to support in a hosted-Wasm environment and are disabled).

In sum: don't plan on using Halide JIT mode with Wasm unless you are working on the Halide library itself.

To Use Halide For WebAssembly:

  • Ensure WebAssembly is in LLVM_TARGETS_TO_BUILD; if you use the default ("all") then it's already present, but otherwise, add it explicitly:
-DLLVM_TARGETS_TO_BUILD="X86;ARM;NVPTX;AArch64;Mips;PowerPC;Hexagon;WebAssembly

Enabling wasm JIT

If you want to run test_correctness and other interesting parts of the Halide test suite (and you almost certainly will), you'll need to ensure that LLVM is built with wasm-ld:

  • Ensure that you have lld in LVM_ENABLE_PROJECTS:
cmake -DLLVM_ENABLE_PROJECTS="clang;lld" ...
  • To run the JIT tests, set HL_JIT_TARGET=wasm-32-wasmrt (possibly adding wasm_simd128, wasm_signext, and/or wasm_sat_float_to_int) and run CMake/CTest normally. Note that wasm testing is only support under CMake (not via Make).

Enabling wasm AOT

If you want to test ahead-of-time code generation (and you almost certainly will), you need to install Emscripten locally.

  • The simplest way to install is probably via the Emscripten emsdk (https://emscripten.org/docs/getting_started/downloads.html).

  • To run the AOT tests, set HL_TARGET=wasm-32-wasmrt (possibly adding wasm_simd128, wasm_signext, and/or wasm_sat_float_to_int) and run CMake/CTest normally. Note that wasm testing is only support under CMake (not via Make).

Running benchmarks

The test_performance benchmarks are misleading (and thus useless) for Wasm, as they include JIT overhead as described elsewhere. Suitable benchmarks for Wasm will be provided at a later date. (See halide#5119 and halide#5047 to track progress.)

Known Limitations And Caveats

  • Current trunk LLVM (as of July 2020) doesn't reliably generate all of the Wasm SIMD ops that are available; see halide#5130 for tracking information as these are fixed.
  • Using the JIT requires that we link the wasm-ld tool into libHalide; with some work this need could possibly be eliminated.
  • OSX and Linux-x64 have been tested. Windows hasn't; it should be supportable with some work. (Patches welcome.)
  • None of the apps/ folder has been investigated yet. Many of them should be supportable with some work. (Patches welcome.)
  • We currently use v8/d8 as a test environment for AOT code; we may want to consider using Node or (better yet) headless Chrome instead (which is probably required to allow for using threads in AOT code).

Known TODO:

  • There's some invasive hackiness in Codgen_LLVM to support the JIT trampolines; this really should be refactored to be less hacky.
  • Can we rework JIT to avoid the need to link in wasm-ld? This might be doable, as the wasm object files produced by the LLVM backend are close enough to an executable form that we could likely make it work with some massaging on our side, but it's not clear whether this would be a bad idea or not (i.e., would it be unreasonably fragile).
  • Buffer-copying overhead in the JIT could possibly be dramatically improved by modeling the copy as a "device" (i.e. copy_to_device() would copy from host -> wasm); this would make the performance benchmarks much more useful.
  • Can we support threads in the JIT without an unreasonable amount of work? Unknown at this point.