Replies: 3 comments 12 replies
-
|
You can change all the aspects of the gears under bike options, wahoo
options! You can set one of the preset with 24 gears or even customize it!
Let me know
Roberto Viola
Software engineer and open source enthusiast
http://robertoviola.cloud
Il giorno sab 21 dic 2024 alle 18:40 eskimos20 ***@***.***>
ha scritto:
… Hi!
I read another topic about gears and ratios. I´ve change my gearing to
have a smaller step between gears.. not sure if it made any difference.
Today I did a 1.5h ride and used gear 3 most of the time. For me that was
about 190w @75rpm. When changing gear to 4 I had an increase of watts to
about 245w @75rpm, for me I think this is to much.
1. Can I adjust any value so that the trainer resistance will be
slightly less between gears ?
2. Are there only 13 gears compared to Zwift 24 ?
/Eskimos
—
Reply to this email directly, view it on GitHub
<#2925>, or
unsubscribe
<https://github.com/notifications/unsubscribe-auth/AAALYWACT6ISM7T66P36E6D2GWRYZAVCNFSM6AAAAABUAZ6IKKVHI2DSMVQWIX3LMV43ERDJONRXK43TNFXW4OZXG4ZDKMZUGM>
.
You are receiving this because you are subscribed to this thread.Message
ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
This is the pull request #2734 And this is the test app, comments on the pr for the feedback https://github.com/cagnulein/qdomyos-zwift/actions/runs/12315201304/artifacts/2317096895 |
Beta Was this translation helpful? Give feedback.
-
|
Thank you! I will test later and give feedback. |
Beta Was this translation helpful? Give feedback.
-
|
@MeckGeiwa it's very experimental, so i don't know if it will work, i'm looking for testers for this reason :) |
Beta Was this translation helpful? Give feedback.
-
|
I did a very short test and it seams to work. I testet with 3 virtual gears. My chainring/cog was on 36/17 und my 3 virtual gears were: 36/17 - no chance in the resistance So it works for me. I had to activate FTMS Bike - otherwise my Tacx Neo 3m wouldn't connect to the QZ app. |
Beta Was this translation helpful? Give feedback.
-
|
Ok @MeckGeiwa so in this way you are not using the wahoo options, because ftms bike use the standard qz gearing You can use the gear gain to decrease the strength of the gears, like 0.5 for example If it's good for you, you can simply use this on the play store beta version https://play.google.com/apps/testing/org.cagnulen.qdomyoszwift |
Beta Was this translation helpful? Give feedback.
-
|
I also have a tacx neo 2 so that makes sence why it is not working at all.
Den ons 25 dec. 2024 09:13MeckGeiwa ***@***.***> skrev:
… Yes, i have the android app and use a taxc neo 3m Trainer.
—
Reply to this email directly, view it on GitHub
<#2925 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AIA7NSNWRQRADOHCJZIM5I32HJSLXAVCNFSM6AAAAABUAZ6IKKVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTCNRWGI2DKNY>
.
You are receiving this because you authored the thread.Message ID:
***@***.***
com>
|
Beta Was this translation helpful? Give feedback.
-
|
@eskimos20virtual gearing it works with your trainer already, it doesn't handle the gear customizing in the wahoo table. But it already works! |
Beta Was this translation helpful? Give feedback.
-
|
Ok! I will check on that later. The winter flu came for a visit 😊
Den ons 25 dec. 2024 09:24Roberto Viola ***@***.***> skrev:
… @eskimos20 <https://github.com/eskimos20> Gears on your trainer already
works, it's another issue. Did you follow my advices above?
—
Reply to this email directly, view it on GitHub
<#2925 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AIA7NSNIDFGQ3PFYQZUBIUD2HJTUPAVCNFSM6AAAAABUAZ6IKKVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTCNRWGI2TAOA>
.
You are receiving this because you were mentioned.Message ID:
***@***.***
com>
|
Beta Was this translation helpful? Give feedback.
-
|
Me too :( |
Beta Was this translation helpful? Give feedback.
-
Hi!
I read another topic about gears and ratios. I´ve change my gearing to have a smaller step between gears.. not sure if it made any difference. Today I did a 1.5h ride and used gear 3 most of the time. For me that was about 190w @75rpm. When changing gear to 4 I had an increase of watts to about 245w @75rpm, for me I think this is to much.
/Eskimos
Beta Was this translation helpful? Give feedback.
All reactions