Replies: 6 comments 5 replies
-
|
Hi for the auto speed enable the speed force under the treadmill options
For the inclination set the inclination step setting to 1 in the treadmill
options
Let me know!
Roberto Viola
Software engineer and open source enthusiast
http://robertoviola.cloud
Il giorno gio 19 dic 2024 alle 18:17 Sixdraw ***@***.***> ha
scritto:
… Hello, I recently purchased the QZ app and I'm having issues with the app
controlling my Sole f85 treadmill. The QZ app reads the speed and incline
accurately but using the app to adjust the speed, the speed won't increase
or decrease. The incline will increase to 1 but will not increase or
decrease after that adjustment.
When using the Peloton app the auto incline works fine but the auto speed
adjustments are not working.
Hopefully I've described the issues accurately, and in the proper forum,
this is my first post on Github. Thanks.
—
Reply to this email directly, view it on GitHub
<#2920>, or
unsubscribe
<https://github.com/notifications/unsubscribe-auth/AAALYWCEYWRKKJQLPEQFOEL2GL5TDAVCNFSM6AAAAABT5OQJX6VHI2DSMVQWIX3LMV43ERDJONRXK43TNFXW4OZXG4YTMMJXHA>
.
You are receiving this because you are subscribed to this thread.Message
ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
Hello cagnulein, thank you for your support. I changed the inclination step setting to 1 as you suggested and incline is now working correctly. I had the speed force setting under treadmill options enabled previously. It's still not working. (I still have it enabled) |
Beta Was this translation helpful? Give feedback.
-
|
Ate you able to change the speed from the speed tile in qz?
Roberto Viola
Software engineer and open source enthusiast
http://robertoviola.cloud
Il giorno gio 19 dic 2024 alle 19:06 Sixdraw ***@***.***> ha
scritto:
… Hello cagnulein, thank you for your support. I changed the inclination
step setting to 1 as you suggested and it's now working correctly.
I had the speed force setting under treadmill options enabled previously.
(It's still enabled)
—
Reply to this email directly, view it on GitHub
<#2920 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AAALYWHXWDUIWOJY4NRAH432GMDJBAVCNFSM6AAAAABT5OQJX6VHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTCNRSGA2TQNQ>
.
You are receiving this because you commented.Message ID:
***@***.***
com>
|
Beta Was this translation helpful? Give feedback.
-
|
No. After pressing start, the treadmill begins at 0.5 (mi/h), and won't adjust when pressing plus or minus from the speed tile. |
Beta Was this translation helpful? Give feedback.
-
|
That's the issue.are you able to change the speed from the sole app
directly? If not It means that it's locked due to safety reason
It happens on some country
Roberto Viola
Software engineer and open source enthusiast
http://robertoviola.cloud
.
Il giorno gio 19 dic 2024 alle 20:05 Sixdraw ***@***.***> ha
scritto:
… No. After pressing start, the treadmill begins at .05, and won't adjust
when pressing plus or minus from the speed tile.
—
Reply to this email directly, view it on GitHub
<#2920 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AAALYWBCUA3FJUVA34724V32GMKF5AVCNFSM6AAAAABT5OQJX6VHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTCNRSGEYDKMI>
.
You are receiving this because you commented.Message ID:
***@***.***
com>
|
Beta Was this translation helpful? Give feedback.
-
|
Using the Sole+ app, i am able to make incline adjustments in display mode but I can't find where I can make any speed adjustments. I emailed [email protected] to see if there is a setting I need to enable. I haven't heard back from them yet. Would that cause the problem I'm having with auto adjusting speed in the Peloton app? And would auto speed be a problem with Zwift also? |
Beta Was this translation helpful? Give feedback.
-
|
Yes all about the speed is blocked on the firmware if you don't see the
speed adjustment in the sole app. Unfortunately on some countries sole
applies this. You should probably need to load a different firmware but I
don't know how
Roberto Viola
Software engineer and open source enthusiast
http://robertoviola.cloud
Il giorno gio 19 dic 2024 alle 23:29 Sixdraw ***@***.***> ha
scritto:
… Using the Sole+ app, i am able to make incline adjustments in display mode
but unable to see where I can make any speed adjustments.
I emailed ***@***.*** to see if there is a setting I need
to enable. I haven't heard back from them yet.
Would that cause the problem I'm having with auto adjusting speed in the
Peloton app? And would auto speed be a problem with Zwift also?
—
Reply to this email directly, view it on GitHub
<#2920 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AAALYWAZ7SSGY3BYGC2LGG32GNCFRAVCNFSM6AAAAABT5OQJX6VHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTCNRSGI2TSNY>
.
You are receiving this because you commented.Message ID:
***@***.***
com>
|
Beta Was this translation helpful? Give feedback.
-
|
"Yes all about the speed is blocked on the firmware if you don't see the Roberto Viola I think I may have to question that statement? I'll try to explain. Using Sole's built-in programs, auto speed and auto incline both work fine, but when using the treadmill's console to access Sole's online workouts, auto speed and incline are not working with the online programs. When running a workout with the Sole+ app on my smartphone, I had the same results, no auto speed or auto incline, yet I could manually adjust the incline from the display mode tab in the app after I stopped the workout. I downloaded and started a free trial period with the Kinomap app on my smartphone and have different results. It's my understanding that Sole Fitness has a partnership with Kinomap and has the Kinomap app pre-installed on my F85 treadmill. Whether I run a workout from the Kinomap app on the console or the Kinomap app on my smartphone, auto incline is working but auto speed isn't. Which suggests to me that the Sole app isn't the determining factor. Being the Sole online programs and the Sole+ app workouts aren't using auto speed or incline, yet auto incline works with Kinomap apps, wouldn't that suggest that auto speed and incline is available but auto speed is not being utilized? I'm still waiting for a response from my email to Sole Fitness. |
Beta Was this translation helpful? Give feedback.
-
|
What you wrote make me thing that Auto speed work for preloaded program on
the sole firmware because are indeed preloaded in the firmware.
Just to be sure: even on kinomap you can't change speed from the app
directly, right?
Roberto Viola
Software engineer and open source enthusiast
http://robertoviola.cloud
Il giorno ven 20 dic 2024 alle 18:38 Sixdraw ***@***.***> ha
scritto:
… "Yes all about the speed is blocked on the firmware if you don't see the
speed adjustment in the sole app."
Roberto Viola
Software engineer and open source enthusiast
http://robertoviola.cloud/
I think I may have to question that statement? I'll try to explain.
Using Sole's built-in programs, auto speed and auto incline both work
fine, but when using the treadmill's console to access an online workout,
auto speed and incline are not working with the online programs.
When running a workout with the Sole+ app on my smartphone, I had the same
results, no auto speed or auto incline, yet I could manually adjust the
incline from the display mode tab in the app after I stopped the workout.
I downloaded and started a free trial period with the Kinomap app on my
smartphone and have different results. It's my understanding that Sole
Fitness has a partnership with Kinomap and has the Kinomap app
pre-installed on my F85 treadmill. Whether I run a workout from the Kinomap
app on the console or the Kinomap app on my smartphone, auto incline is
working but auto speed isn't.
Being the Sole online programs and the Sole+ app workouts aren't using
auto speed and incline, yet auto incline works with Kinomap apps, wouldn't
that suggest that auto speed and incline is available but not being
utilized?
I'm still waiting for a response from my email to Sole Fitness.
—
Reply to this email directly, view it on GitHub
<#2920 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AAALYWBJ6V4FD2REP7F7FXL2GRI2ZAVCNFSM6AAAAABT5OQJX6VHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTCNRTGE2TGMY>
.
You are receiving this because you commented.Message ID:
***@***.***
com>
|
Beta Was this translation helpful? Give feedback.
-
|
After exploring the Kinomap app, I couldn't find any option to manually control the speed or the incline with the Kinomap app. Perhaps someone could point out where I would find those manual options if available? |
Beta Was this translation helpful? Give feedback.
-
|
On a treadmill session it's enabled by default. The fact you don't see them
it's because they removed because the protocol doesn't handle.
Let's wait the sole answer
Roberto Viola
Software engineer and open source enthusiast
http://robertoviola.cloud
Il giorno sab 21 dic 2024 alle 00:06 Sixdraw ***@***.***> ha
scritto:
… After exploring the Kinomap app, I couldn't find any option to manually
control the speed or the incline. Perhaps someone could point out where I
would find those manual options if available?
—
Reply to this email directly, view it on GitHub
<#2920 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AAALYWFPBC42LSAJVTOPCDD2GSPI7AVCNFSM6AAAAABT5OQJX6VHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTCNRTGQZDKNI>
.
You are receiving this because you commented.Message ID:
***@***.***
com>
|
Beta Was this translation helpful? Give feedback.
-
Hello, I recently purchased the QZ app and I'm having issues with the app controlling my Sole f85 treadmill. The QZ app reads the speed and incline accurately but when using the app to adjust the speed, the speed won't increase or decrease. The incline will increase to 1 but will not increase or decrease after that adjustment.
When using the Peloton app the auto incline works fine but the auto speed adjustments are not working.
Hopefully I've described the issues accurately, and in the proper forum, this is my first post on Github. Thanks.
Beta Was this translation helpful? Give feedback.
All reactions