Replies: 5 comments 4 replies
-
|
Thanks I will check it ASAP
Roberto Viola
Software engineer and open source enthusiast
http://robertoviola.cloud
Il giorno sab 30 nov 2024 alle 06:33 bgtees ***@***.***> ha
scritto:
… Have QZ installed on my iPhone (15PM, if it matters). Connects to my
Horizon 7.8 treadmill just fine and it displays all of the metrics
correctly on the dashboard. If I adjust the speed up or down from the QZ
app, it works as expected. But, if I try to adjust the incline from the
app, it only decreases the incline (as is hopefully shown in the attached
debug log). If I have the incline manually set at 6.0 and press the "+"
sign in the app, it will lower the incline. If I press the "-" sign in the
app, that will also lower the incline even more. Any help with how to fix
this would be greatly appreciated. Thanks!
debug-Fri_Nov_29_23_01_06_2024.log
<https://github.com/user-attachments/files/17964347/debug-Fri_Nov_29_23_01_06_2024.log>
—
Reply to this email directly, view it on GitHub
<#2846>, or
unsubscribe
<https://github.com/notifications/unsubscribe-auth/AAALYWH4MRCNOQ5T2N23PKD2DFE37AVCNFSM6AAAAABSYE7UVOVHI2DSMVQWIX3LMV43ERDJONRXK43TNFXW4OZXGU4DCNRYHE>
.
You are receiving this because you are subscribed to this thread.Message
ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
got the issue, it's about this one #2495 the @LizzieAC treadmill wants a /2 inclination to set the right one, that's why for your model i'm sending it in this way. @LizzieAC are you still using QZ? maybe it will be useful to compare both firmware revision let me know |
Beta Was this translation helpful? Give feedback.
-
|
I am, however, I’ve been away and it’s been beautiful out so I’ve been going outside. I will try it out when I get home and send you back a report.Thank you for reaching out!Sent from my iPadOn Nov 30, 2024, at 8:09 AM, Roberto Viola ***@***.***> wrote:
got the issue, it's about this one #2495
the @LizzieAC treadmill wants a /2 inclination to set the right one, that's why for your model i'm sending it in this way. @LizzieAC are you still using QZ? maybe it will be useful to compare both firmware revision
let me know
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you were mentioned.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
thanks @LizzieAC ! |
Beta Was this translation helpful? Give feedback.
-
It's 5.004. Per the Horizon website, it's the current firmware version. |
Beta Was this translation helpful? Give feedback.
-
|
Ok maybe @LizzieAC has an outdated one? Let's wait for a confirmation so in case I will remove the workaround that I did for its firmware |
Beta Was this translation helpful? Give feedback.
-
So until that change is made, can I just manually edit the numbers in the "Inclination Overrides" setting to get it working? |
Beta Was this translation helpful? Give feedback.
-
|
Yes it should work. I would like to do a changes that work for everyone
Roberto Viola
Software engineer and open source enthusiast
http://robertoviola.cloud
Il giorno mer 4 dic 2024 alle 19:25 bgtees ***@***.***> ha
scritto:
… Ok maybe @LizzieAC <https://github.com/LizzieAC> has an outdated one?
Let's wait for a confirmation so in case I will remove the workaround that
I did for its firmware
So until that change is made, can I just manually edit the numbers in the
"Inclination Overrides" setting to get it working?
—
Reply to this email directly, view it on GitHub
<#2846 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AAALYWCXBXIEU52E66QOGIL2D5CKRAVCNFSM6AAAAABSYE7UVOVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTCNBWGQ3TGMI>
.
You are receiving this because you commented.Message ID:
***@***.***
com>
|
Beta Was this translation helpful? Give feedback.
-
|
I apologize for not testing. I have been traveling quite a bit. I’ll be back him after the 14th and I will get on and test. Sent from my iPadOn Dec 4, 2024, at 1:43 PM, Roberto Viola ***@***.***> wrote:
Yes it should work. I would like to do a changes that work for everyone
Roberto Viola
Software engineer and open source enthusiast
http://robertoviola.cloud
Il giorno mer 4 dic 2024 alle 19:25 bgtees ***@***.***> ha
scritto:
Ok maybe @LizzieAC <https://github.com/LizzieAC> has an outdated one?
Let's wait for a confirmation so in case I will remove the workaround that
I did for its firmware
So until that change is made, can I just manually edit the numbers in the
"Inclination Overrides" setting to get it working?
—
Reply to this email directly, view it on GitHub
<#2846 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AAALYWCXBXIEU52E66QOGIL2D5CKRAVCNFSM6AAAAABSYE7UVOVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTCNBWGQ3TGMI>
.
You are receiving this because you commented.Message ID:
***@***.***
com>
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you were mentioned.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
Have QZ installed on my iPhone (15PM, if it matters). Connects to my Horizon 7.8 treadmill just fine and it displays all of the metrics correctly on the dashboard. If I adjust the speed up or down from the QZ app, it works as expected. But, if I try to adjust the incline from the app, it only decreases the incline (as is hopefully shown in the attached debug log). If I have the incline manually set at 6.0 and press the "+" sign in the app, it will lower the incline to 3.0, and if I press the "-" sign in the app, that will also lower the incline even more. Any help with how to fix this would be greatly appreciated. Thanks!
debug-Fri_Nov_29_23_01_06_2024.log
Beta Was this translation helpful? Give feedback.
All reactions