FTMS not working with Echelon Stride and Peloton App anymore?

[speedf1]

It's probably something I've done, but I'm at a loss as to what has happened.

I have two profiles set on the QA app. One for the Echelon Sport bike and one for the Echelon Stride treadmill. Stats for both devices are picked up by the QZ app and displayed within the app. However, only the bike stats are picked up by the IOS Peloton app. The Peloton app doesn't seem to recognise the stats transmitted by the QZ app for the stride.

This did use to work - I'm not aware of my changing anything though.

Attached are debug logs

debug-Thu_Sep_12_16_22_51_2024.log

[cagnulein]

Since I didn't change anything I guess peloton updates their app? I will test this when I will be at home Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud Il giorno sab 14 set 2024 alle 09:53 speedf1 ***@***.***> ha scritto:

…

It's probably something I've done, but I'm at a loss as to what has happened. I have two profiles set on the QA app. One for the Echelon Sport bike and one for the Echelon Stride treadmill. Stats for both devices are picked up by the QZ app and displayed within the app. However, only the bike stats are picked up by the IOS Peloton app. The Peloton app doesn't seem to recognise the stats transmitted by the QZ app for the stride. This did use to work - I'm not aware of my changing anything though. Attached are debug logs debug-Thu_Sep_12_16_22_51_2024.log <https://github.com/user-attachments/files/17001498/debug-Thu_Sep_12_16_22_51_2024.log> — Reply to this email directly, view it on GitHub <#2597>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAALYWBLGA5KFJOYRFCI7U3ZWPTQXAVCNFSM6AAAAABOGT6NUWVHI2DSMVQWIX3LMV43ERDJONRXK43TNFXW4OZXGE4DCOBTGA> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

[speedf1]

Hi Roberto,

Once again, I'm impressed by how quickly you respond - are you just sitting awaiting these messages coming in? ;-)

Take your time, I wouldn't be surprised if it's something that I've done!

Thanks again!

[cagnulein]

Nope actually I'm at the park with my little daughter :) Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud Il giorno sab 14 set 2024 alle 10:01 speedf1 ***@***.***> ha scritto:

…

Hi Roberto, Once again, I'm impressed by how quickly you respond - are you just sitting awaiting these messages coming in? ;-) Take your time, I wouldn't be surprised if it's something that I've done! Thanks again! — Reply to this email directly, view it on GitHub <#2597 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAALYWAADVHM4WERSXS4L23ZWPUOLAVCNFSM6AAAAABOGT6NUWVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTANRUGQ3TQMI> . You are receiving this because you commented.Message ID: ***@***.*** com>

[cagnulein]

This works

Let me try the last one

[cagnulein]

also the last one works

[cagnulein]

@speedf1 install nrfconnect on the peloton app and show me how you see qz from there

[speedf1]

Am away for a couple of days, will do that when I get back.

[cagnulein]

Sure

[speedf1]

OK, I think I've worked out the problem.

It's something to do with the Bluetooth name of the device running the QZ app.

If I have the bluetooth name set to "Ians OnePlus 10T", then the iPad running the Peloton app can't "see" the QZ stats. If I change the bluetooth name to "Ians OnePlus" (i.e. just reduce the name by a few characters), then the Peloton app CAN see the QZ stats.

Interestingly this is only a problem on the QZ profile I've created for the treadmill and not for the bike.

[cagnulein]

yes it could be because for treadmill qz is sending more bytes in the advertise channel. so less byte for the names are leaving more bytes for other data.

[speedf1]

That certainly sounds reasonable. Is it worth adding a check to the QZ app and then advising users if the bluetooth name is too long?

[cagnulein]

Yes thanks for the idea! I will check if it's doable!