wrong firmware for cylindrical camera?

[rdpeake]

Hey, so i have the newer cylindrical PS4 camera, and whilst i am able to run firmware code from stbnps's fork on windows 10 i get an error following that, about the driver reporting an error. I am assuming that the problem here is that the newer camera requires a different firmware than what is currently available here.

Am i correct in my assumption?

[rdpeake]

The error is
USB\SET_ADDRESS_FAILURE
Outranked Drivers: usb.inf:USB\SET_ADDRESS_FAILURE:00FF2000

The device id shows up as USB\VID_0000&PID_0004\5&32b3201e&0&21

[colejd]

@bigboss-ps3dev Do you have any advice on this? I may need to purchase a cylindrical camera and I want to make sure it works before spending the money.

[bigboss-ps3dev]

i have it working on osx. Not tested on other platforms.

[rdpeake]

Could a poorly solder connector cause this problem, or would that just not connect to the computer at all?

[bigboss-ps3dev]

I only tested on osx with home made connector aux female to usb3 male https://twitter.com/psxdev/status/786954904690720768
https://twitter.com/psxdev/status/786958757150519296

[rdpeake]

That's the connector i've got as well, not sure i trust my soldering skills on the aux connector, but it communicates with the computer. i'll have to see if i can get it to work on my work mac.

[nicolaerosia]

@rdpeake have you got this to work?

[rdpeake]

Have yet to try

[smk-robotics]

I need some help.
Ubuntu - 14.04.5.
Kernel - 4.4.0-101-generic
Camera - CUH-ZEY2 (2nd generation, cylindrical)
Initialization camera is ok, cheese and guvcview see my camera, but when i choose it shows only black screens
guvcview says:
"V4L2_CORE: Could not grab image (select timeout): Resource temporarily unavailable"
What i need to do?

[l33tl4bs]

See #1 for fix!

[rdpeake]

Following up on this now (i've gotten the official ps5 adapter for the camera, so i know it is not the usb adapter) - but after running the load script for the camera, it shows up as a 'OVR camera' but nothing is able to get a follow up handle on the device in order to capture any video stream for the device - not even running the tool a second time is able to connect to the hardware.

[psxdev]

https://gist.github.com/psxdev/e755aba0b3269dc9c4cb8f258319bc4c

cylindrical has new product id
idVendor 0x05a9 OmniVision Technologies, Inc.
idProduct 0x058b

check last firmwares from https://github.com/psxdev/luke_firmwares