From 978c5826ba904fe664842a7c5b5c4ff4650fd599 Mon Sep 17 00:00:00 2001
From: Mikhail Grushinskiy <mgrouch@users.noreply.github.com>
Date: Tue, 5 Nov 2024 20:30:39 -0500
Subject: [PATCH] Update bbn_m5atomS3_lite_env.ino

---
 .../bbn_m5atomS3_lite_env.ino                 | 33 +++++++++++--------
 1 file changed, 20 insertions(+), 13 deletions(-)

diff --git a/bbn_m5atomS3_lite_env/bbn_m5atomS3_lite_env.ino b/bbn_m5atomS3_lite_env/bbn_m5atomS3_lite_env.ino
index 116ac0a..b976b3b 100644
--- a/bbn_m5atomS3_lite_env/bbn_m5atomS3_lite_env.ino
+++ b/bbn_m5atomS3_lite_env/bbn_m5atomS3_lite_env.ino
@@ -1,11 +1,11 @@
 #include <M5AtomS3.h>
+#include <Arduino.h>
 #include <M5UnitENV.h>
 #include <Wire.h>
 #include "NmeaXDR.h"
-#include "Nmea0183Msg.h"
 
-SHT3X sht3x;
-QMP6988 qmp6988;
+DHT12 dht12;
+BMP280 bmp280;
 
 void setup() {
   auto cfg = M5.config();
@@ -14,27 +14,34 @@ void setup() {
   Serial.begin(4800);
 
   int i = 0;
-  while (!qmp6988.begin(&Wire, QMP6988_SLAVE_ADDRESS_L, G2, G1, 100000U) && i < 3) {
-    gen_nmea0183_msg("$BBTXT,01,01,01,Sensor not found type=%s", "QMP6988");
+  while (!dht12.begin(&Wire, DHT12_I2C_ADDR, G2, G1, 100000U) && i < 3) {
+    gen_nmea0183_msg("$BBTXT,01,01,01,Sensor not found type=%s", "DHT12");
     delay(4);
     i++;
   }
   i = 0;
-  while (!sht3x.begin(&Wire, SHT3X_I2C_ADDR, G2, G1, 100000U) && i < 3) {
-    gen_nmea0183_msg("$BBTXT,01,01,01,Sensor not found type=%s", "SHT3X");
+  while (!bmp280.begin(&Wire, BMP280_I2C_ADDR, G2, G1, 100000U) && i < 3) {
+    gen_nmea0183_msg("$BBTXT,01,01,01,Sensor not found type=%s", "BMP280");
     delay(4);
     i++;
   }
+
+  /* Default settings from datasheet. */
+  bmp.setSampling(BMP280::MODE_NORMAL,     /* Operating Mode. */
+                  BMP280::SAMPLING_X2,     /* Temp. oversampling */
+                  BMP280::SAMPLING_X16,    /* Pressure oversampling */
+                  BMP280::FILTER_X16,      /* Filtering. */
+                  BMP280::STANDBY_MS_500); /* Standby time. */
 }
 
 void loop() {
-  if (sht3x.update()) {
-    gen_nmea0183_xdr("$BBXDR,H,%.2f,P,HUMI_SHT3X", sht3x.humidity);   // %
-    gen_nmea0183_xdr("$BBXDR,C,%.2f,C,TEMP_SHT3X", sht3x.cTemp);      // C
+  if (dht12.update()) {
+    gen_nmea0183_xdr("$BBXDR,H,%.2f,P,HUMI_DHT12", dht12.humidity);   // %
+    gen_nmea0183_xdr("$BBXDR,C,%.2f,C,TEMP_DHT12", dht12.cTemp);      // C
   }
-  if (qmp6988.update()) {
-    gen_nmea0183_xdr("$BBXDR,C,%.2f,C,TEMP_QMP6988", qmp6988.cTemp);        // C
-    gen_nmea0183_xdr("$BBXDR,P,%.2f,P,PRES_QMP6988", qmp6988.pressure);     // Pa
+  if (bmp280.update()) {
+    gen_nmea0183_xdr("$BBXDR,C,%.2f,C,TEMP_BMP280", bmp280.cTemp);        // C
+    gen_nmea0183_xdr("$BBXDR,P,%.2f,P,PRES_BMP280", bmp280.pressure);     // Pa
   }
   delay(1000);
 }