From 83b9bbd51b21cf0a3abc7501307f9c68090217a3 Mon Sep 17 00:00:00 2001
From: Mikhail Grushinskiy <mgrouch@users.noreply.github.com>
Date: Tue, 9 Apr 2024 13:09:40 -0400
Subject: [PATCH] Create bbn_m5atomS3_lite_eth_https.ino

---
 .../bbn_m5atomS3_lite_eth_https.ino           | 138 ++++++++++++++++++
 1 file changed, 138 insertions(+)
 create mode 100644 bbn_m5atomS3_lite_eth_https/bbn_m5atomS3_lite_eth_https.ino

diff --git a/bbn_m5atomS3_lite_eth_https/bbn_m5atomS3_lite_eth_https.ino b/bbn_m5atomS3_lite_eth_https/bbn_m5atomS3_lite_eth_https.ino
new file mode 100644
index 0000000..c84ff97
--- /dev/null
+++ b/bbn_m5atomS3_lite_eth_https/bbn_m5atomS3_lite_eth_https.ino
@@ -0,0 +1,138 @@
+/*
+
+ based on:
+ 
+ Web SSL client
+ 
+ This sketch connects to a test website (httpbin.org)
+ and try to do a secure GET request on port 443,
+ to do the SSL request we use SSLClient with the
+ site Trust Anchor
+ the output is printed on Serial
+ 
+ by Renzo Mischianti <www.mischianti.org>
+ 
+ https://www.mischianti.org
+ 
+ */
+ 
+#include <M5Atom.h>
+#include <Arduino.h>
+#include <SPI.h>
+#include <EthernetLarge.h>
+#include <SSLClient.h>
+#include "trust_anchors.h"
+
+#define SERVER "httpbin.org"
+
+#define SCK  22
+#define MISO 23
+#define MOSI 33
+#define CS   19
+
+byte mac[] = {0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x99};
+
+// Choose the analog pin to get semi-random data from for SSL
+// Pick a pin that's not connected or attached to a randomish voltage source
+const int rand_pin = 34;
+
+// Initialize the SSL client library
+// We input an EthernetClient, our trust anchors, and the analog pin
+EthernetClient base_client;
+SSLClient client(base_client, TAs, (size_t)TAs_NUM, rand_pin);
+
+// Variables to measure the speed
+unsigned long beginMicros, endMicros;
+unsigned long byteCount = 0;
+bool printWebData = true;  // set to false for better speed measurement
+
+void setup() {
+  Serial.begin(115200);
+
+  Serial.println("Initializing SPI...");
+  SPI.begin(SCK, MISO, MOSI, -1);
+  Serial.println("Initializing ethernet...");
+  Ethernet.init(CS);
+
+  while (Ethernet.begin(mac) != 1) {
+    Serial.println("Error getting IP address via DHCP, trying again...");
+    delay(2000);
+  }
+
+  // Check for Ethernet hardware present
+  if (Ethernet.hardwareStatus() == EthernetNoHardware) {
+    Serial.println(
+      "Ethernet shield was not found.  Sorry, can't run without "
+      "hardware. :(");
+    while (true) {
+      delay(1);  // do nothing, no point running without Ethernet hardware
+    }
+  }
+  if (Ethernet.linkStatus() == LinkOFF) {
+    Serial.println("Ethernet cable is not connected.");
+  }
+  Serial.print("Local IP : ");
+  Serial.println(Ethernet.localIP());
+  Serial.print("Subnet Mask : ");
+  Serial.println(Ethernet.subnetMask());
+  Serial.print("Gateway IP : ");
+  Serial.println(Ethernet.gatewayIP());
+  Serial.print("DNS Server : ");
+  Serial.println(Ethernet.dnsServerIP());
+
+  Serial.println("Ethernet Successfully Initialized");
+  // if you get a connection, report back via serial:
+  if (client.connect(SERVER, 443)) {
+    Serial.print("connected to ");
+    // Make a HTTP request:
+    client.println("GET /get HTTP/1.1");
+    client.println("Host: httpbin.org");
+    client.println("Connection: close");
+    client.println();
+  } else {
+    // if you didn't get a connection to the server:
+    Serial.println("connection failed");
+  }
+  beginMicros = micros();
+}
+
+void loop() {
+
+  //Serial.println("making GET request");
+
+  // if there are incoming bytes available
+  // from the server, read them and print them:
+  int len = client.available();
+  if (len > 0) {
+    byte buffer[80];
+    if (len > 80) len = 80;
+    client.read(buffer, len);
+    if (printWebData) {
+      Serial.write(buffer, len); // show in the serial monitor (slows some boards)
+    }
+    byteCount = byteCount + len;
+  }
+ 
+  // if the server's disconnected, stop the client:
+  if (!client.connected()) {
+    endMicros = micros();
+    Serial.println();
+    Serial.println("disconnecting.");
+    client.stop();
+    Serial.print("Received ");
+    Serial.print(byteCount);
+    Serial.print(" bytes in ");
+    float seconds = (float)(endMicros - beginMicros) / 1000000.0;
+    Serial.print(seconds, 4);
+    float rate = (float)byteCount / seconds / 1000.0;
+    Serial.print(", rate = ");
+    Serial.print(rate);
+    Serial.print(" kbytes/second");
+    Serial.println();
+ 
+    // do nothing forevermore:
+    while (true) {
+      delay(1);
+    }
+  }
+}