Firmware updating doesn't works with huge partition table

[Vano3d]

Hello,
I'm using huge partition csv:
Name, Type, SubType, Offset, Size, Flags
nvs, data, nvs, 0x9000, 0x5000,
otadata, data, ota, 0xe000, 0x2000,
app0, app, ota_0, 0x10000, 0x300000,
spiffs, data, spiffs, 0x310000,0xF0000,

And I use a lot of another libs in my project:

gyverlibs/GyverOLED@^1.6.1
gyverlibs/EncButton@^3.6.0
gyverlibs/GyverTimer@^3.2
gyverlibs/GyverBlinker@^1.1.0
bblanchon/ArduinoJson@^7.0.0
mathieucarbou/AsyncTCP @ 3.2.10
https://github.com/ayushsharma82/ElegantOTA#3.1.6
adafruit/Adafruit ADS1X15@^2.5.0
bodmer/TFT_eSPI@^2.5.43
gyverlibs/GyverSegment@^1.4.5
build_flags = -DELEGANTOTA_USE_ASYNC_WEBSERVER=1

ElegantOTA stops updating on 14%, then ESP32 rebooting ((
With standard partition or without updating working perfectly, but I have a big project.

Thanks for assistance!

[mathieucarbou]

I am in the same use case as you, that's why I did MycilaSafeBoot: a recovery partition allowing to flash a bigger app partition. You can learn more at:

https://github.com/mathieucarbou/MycilaSafeBoot

ElegantOTA requires a standard partition model where you have two app partitions: ota_0 and ota1 with the same size for both.

[github-actions]

This issue is stale because it has been open 30 days with no activity. Remove stale label or comment or this will be closed in 5 days.

[github-actions]

This issue was closed because it has been stalled for 5 days with no activity.