chain.para.toml

Title = "user.p.para."
TestNet = false
CoinSymbol = "para"
EnableParaFork = true
ChainID = 898

[address]
#旧的版本或bty缺省是btc格式地址，可以支持eth格式地址，如果对地址格式没要求，采用缺省配置即可
defaultDriver = "eth"
[address.enableHeight]
btc = 0
eth = 0

[crypto]

[log]
# 日志级别，支持debug(dbug)/info/warn/error(eror)/crit
loglevel = "debug"
logConsoleLevel = "info"
# 日志文件名，可带目录，所有生成的日志文件都放到此目录下
logFile = "logs/chain.para.log"
# 单个日志文件的最大值（单位：兆）
maxFileSize = 300
# 最多保存的历史日志文件个数
maxBackups = 100
# 最多保存的历史日志消息（单位：天）
maxAge = 28
# 日志文件名是否使用本地事件（否则使用UTC时间）
localTime = true
# 历史日志文件是否压缩（压缩格式为gz）
compress = true
# 是否打印调用源文件和行号
callerFile = true
# 是否打印调用方法
callerFunction = true


[blockchain]
defCacheSize = 128
maxFetchBlockNum = 128
timeoutSeconds = 5
batchBlockNum = 128
driver = "leveldb"
dbPath = "paradatadir"
dbCache = 64
isStrongConsistency = true
singleMode = true
batchsync = false
#平行链钱包通过平行链区块seqence索引高度，缺省是true
isRecordBlockSequence = true
isParaChain = false
enableTxQuickIndex = true
# 升级storedb是否重新执行localdb，bityuan主链升级不需要开启，平行链升级需要开启
enableReExecLocal = true
# 使能精简localdb
enableReduceLocaldb = false
enablePushSubscribe = false
disableShard=true
enableSaveBlockKVs=true

[p2p]
types = ["dht"]
#types = ["gossip"]
enable = true
driver = "leveldb"
dbPath = "paradatadir/addrbook"
dbCache = 4
grpcLogFile = "grpc33.log"
waitPid = false

[p2p.sub.gossip]
port=13801
# 种子节点，格式为ip:port，多个节点以逗号分隔，如seeds=["10.0.0.1:13802","10.0.0.2:13802","10.0.0.3:13802"]
seeds=["172.31.0.8:13801","172.31.0.9:13801","172.31.0.10:13801","172.31.0.11:13801"]
isSeed=true
innerSeedEnable=false
useGithub=false
innerBounds=300
channel=1898
serverStart=true
maxTTL=1


[p2p.sub.dht]
DHTDataPath = "paradatadir/p2pstore"
#seeds=["172.31.0.8:13801","172.31.0.9:13801","172.31.0.10:13801","172.31.0.11:13801"]
port=13801 # TODO.p2p.port

maxConnectNum=100
# 禁止通过局域网发现节点
disableFindLANPeers=false
# 配置为全节点模式，全节点保存所有分片数据
isFullNode=true
# 分片数据默认保存比例，最低可配置为10
percentage=30

[rpc]
# 避免与主链配置冲突
jrpcBindAddr = "0.0.0.0:8901" # TODO.rpc.addr1
grpcBindAddr = "0.0.0.0:8902" # TODO.rpc.addr2
whitelist = ["*"]
jrpcFuncWhitelist = ["*"]
grpcFuncWhitelist = ["*"]

[rpc.sub.eth]
enable = false
httpAddr = "localhost:8545"  # TODO.rpc.addr3
httpApi = ["eth", "web3", "personal", "admin", "net"]
# websocket 绑定地址
wsAddr = "localhost:8546"  # TODO.rpc.addr4
wsApi = ["eth", "web3", "personal", "admin", "net"]

[rpc.parachain]
#主链节点的grpc服务器ip，当前可以支持多ip负载均衡，如“118.31.177.1:8802,39.97.2.127:8802”
#mainChainGrpcAddr="jiedian2.bityuan.com,cloud.bityuan.com"
mainChainGrpcAddr = "172.31.0.12:8902" # TODO.rpc.parachain
#配置grpc负载均衡为sync模式
useGrpcLBSync = false
forwardExecs = ["paracross"]
forwardActionNames = ["crossAssetTransfer"]

[mempool]
name = "timeline"
poolCacheSize = 10240
#联盟链没有交易费，对应平行链minTxFeeRate需要设为0
minTxFeeRate = 0 
maxTxNumPerAccount = 1000000

[consensus]
name="qbft"
minerstart=true
genesisBlockTime=1703745259
genesis="0x065dc496c80deaef2053429d725b69f58e3b7e82" # TODO.ADDR.u1
#minerExecs=["ticket", "autonomy"]
enableBestBlockCmp=true
minerExecs=["paracross"]    #配置挖矿合约
#committer="rollup"

#[consensus.sub.rollup]
## 配置节点账户私钥 
#authKey = ""
## 当authKey未配置时, 支持配置节点账户地址
## 即从钱包中获取对应的私钥, 节点需要创建钱包并解锁导入对应的私钥
#authAccount = ""

[consensus.sub.rollup]
#验证者账户地址, 其私钥用于签名交易及生成验证者bls私钥对, 1CqsBFa8KMGG9yjY4XcCUWaqdscBw6eipn
#authAccount="0x7d80b7764c5d5efbac47551e737b8bfc26d25945"  
#blspub=99ae786cac6a6ee65718d3bc036a57f90f92f38b5d14e6f61a7cfe2468ff96eed9e162aa0c8bda1f770b6f78513583eb
# 配置节点账户私钥
authKey="" #  TODO.ADDR1.u2
# 是否全量数据提交, 是则所有交易需采用bls签名类型
fullDataCommit=false
# 状态提交间隔
# 最低60s, 默认5min
maxCommitInterval = 300 #seconds
# 设置平行链启动时对应的主链高度
startHeight=0
reservedMainHeight=12
addressID=2

[consensus.sub.dpos]
delegateNum=1
blockInterval=10
continueBlockNum=100
blockNumToUpdateDelegate=1000
registTopNHeightLimit=10
updateTopNHeightLimit=20

[mver.consensus]
fundKeyAddr = "0x5e44c5d6380bde65368181e66c023334098c249d"  # TODO.ADDR.u13
powLimitBits = "0x1f00ffff"
maxTxNumber = 1600


[mver.consensus.paracross]
#超级节点挖矿奖励
coinReward = 18
#发展基金奖励
coinDevFund = 12
#如果超级节点上绑定了委托账户，则奖励超级节点coinBaseReward，其余部分(coinReward-coinBaseReward)按权重分给委托账户
coinBaseReward = 3
#委托账户最少解绑定时间(按小时)
unBindTime = 24
#支持挖矿奖励的1e8小数模式，比如18coin 需要配置成1800000000 以支持小数位后的配置,如果true，意味着已经打开即须配置coinReward=1800000000
decimalMode = false
#挖矿模式， normal：缺省挖矿，其他自定义，注册名字需要和配置名字保持一致
minerMode = "normal"
#挖矿减半周期,按高度减半
halvePeriod = 1000

[consensus.sub.qbft]
# 创世交易地址
genesis = "0x8387505d1571ee2b2d7339addb3f5dcf9f32c389" # TODO.ADDR.u11
# 创世交易地址账户余额
genesisAmount = 100000000
# 创世区块时间(UTC时间)
genesisBlockTime = 1703745259
# 获取交易间隔时长,以下时长单位均为毫秒
timeoutTxAvail = 800
# 等待proposal超时基准时长
timeoutPropose = 5000
# 每轮延长等待proposal的时长
timeoutProposeDelta = 500
# 等待pre-vote超时基准时长
timeoutPrevote = 3000
# 每轮延长等待pre-vote的时长
timeoutPrevoteDelta = 500
# 等待pre-commit超时基准时长
timeoutPrecommit = 3000
# 每轮延长等待pre-commit的时长
timeoutPrecommitDelta = 500
# 收到对一个区块的2/3pre-commits后,等待落后者投票超时时长,超时后将启动新高度流程
timeoutCommit = 500
# 是否在收到所有pre-commits,还未达到超时等待时长时,取消等待,如果为true,将启动新高度流程;如果为false,等到超时才启动新高度流程
skipTimeoutCommit = false
# 创建空区块的时间间隔,如果等于0则认为不出空块，单位为秒
emptyBlockInterval = 0
# 节点公钥文件
#genesisFile="genesis.json"
# 节点私钥文件
#privFile="priv_validator.json"
# 共识端口号，默认为33001
port=33001 # TODO.qbft.port
# 共识节点，格式为ip:port，多个节点以逗号分隔，节点数至少为4个
validatorNodes=["172.31.0.8:33001","172.31.0.9:33001","172.31.0.10:33001","172.31.0.11:33001"]
# 是否开启快速同步，推荐打开
fastSync = true
# propose阶段是否预执行区块，提高性能推荐关闭
preExec = false
# 签名算法,支持"secp256k1","ed25519","sm2","bls",默认为"ed25519"
signName = "bls"
# 是否使用聚合签名,签名算法需支持该特性,比如"bls"
useAggregateSignature = true
# 连续提议区块的个数，默认为1
#multiBlocks=10
# 消息发送间隔，单位为毫秒
#messageInterval=50
sameBlocktime = true

[consensus.sub.para]
#ParaRemoteGrpcClient配置已变更为mainChainGrpcAddr
#主链指定高度的区块开始同步
startHeight = 345850
#主链指定高度后等待块数，防止主链回滚，联盟链最小为1，小于1则采用缺省高度100
#waitMainBlockNum=100
#等待打包主链区块时间间隔，单位毫秒
writeBlockMsec = 2000
#共识节点账户，共识节点需要配置自己的账户，并且钱包导入对应种子，非共识节点留空
authAccount = ""
#创世地址额度
genesisAmount = 100000000
#主链支持平行链共识tx分叉高度，需要和主链保持严格一致,不可修改,2270000是bityuan主链对应高度， ycc或其他按实际修改
#不可为0，主链Local时候需特殊配置
mainForkParacrossCommitTx = 2270000
#主链开启循环检查共识交易done的fork高度,需要和主链保持严格一致,不可修改,4320000是bityuan主链对应高度， ycc或其他按实际修改
#不可为0，主链Local时候需特殊配置
mainLoopCheckCommitTxDoneForkHeight = 4320000
#无平行链交易的主链区块间隔，平行链产生一个空块，从高度0开始，格式[blockHeight:interval],比如["0:50","1000:100"],blockHeight为平行链高度
emptyBlockInterval = ["0:50"]
# 
selfConsensEnablePreContract=["0-1000"]

#平行链共识节点聚合签名配置
[consensus.sub.para.bls]
#是否开启聚合签名，缺省不开启
blsSign = false


[store]
name = "kvmvccmavl"
driver = "leveldb"
storedbVersion = "2.0.0"
dbPath = "paradatadir/mavltree"
dbCache = 128

[store.sub.mavl]
enableMavlPrefix = false
enableMVCC = false
enableMavlPrune = false
pruneHeight = 10000
# 是否使能mavl数据载入内存
enableMemTree = true
# 是否使能mavl叶子节点数据载入内存
enableMemVal = true
# 缓存close ticket数目，该缓存越大同步速度越快，最大设置到1500000
tkCloseCacheLen = 100000

[store.sub.kvmvccmavl]
enableMVCCIter = true
enableMavlPrefix = false
enableMVCC = false
enableMavlPrune = false
pruneMavlHeight = 10000
enableMVCCPrune = false
pruneMVCCHeight = 10000
# 是否使能mavl数据载入内存
enableMemTree = true
# 是否使能mavl叶子节点数据载入内存
enableMemVal = true
# 缓存close ticket数目，该缓存越大同步速度越快，最大设置到1500000
tkCloseCacheLen = 100000
# 该参数针对平行链，如果平行链的ForkKvmvccmavl高度不为0,需要开启此功能,开启此功能需要从0开始执行区块
enableEmptyBlockHandle = false
# 保存区块相关数据时，同时保存kv
enableSaveBlockKVs = true

[wallet]
minFee = 1
driver = "leveldb"
dbPath = "parawallet"
dbCache = 16
signType = "secp256k1"
minerdisable = true

[exec]
enableStat = false
enableMVCC = false

[exec.sub.relay]
genesis = "0x2cb1656b4cc952975b5cd4efdaead4e3a68003c4" # TODO.ADDR.u12 
[exec.sub.manage]
superManager = ["0x58501f33644a74ac9423f0bdca6f726bc872fc55"] # TODO.ADDR.u4
#autonomy执行器名字,空则不开启,使用superManager list
autonomyExec = ""
[exec.sub.token]
saveTokenTxList = true
tokenApprs = [ "0x8311a9b6c6ff9325e6e8c101cbc806cc0ce8a557"]  # TODO.ADDR.u3
friendExecer = ["evm"]

[exec.sub.paracross]
#平行链自共识停止n个空块的对应主链高度后，超级账户可以直接参与投票,这个高度只在主链有效
paraConsensusStopBlocks = 30000
#是否关闭自共识,缺省开启自共识校验
closeSelfConsensus = false
#平行链在构建区块时候配置丢弃tx list
discardTxs = []

[exec.sub.autonomy]
total = "0x9082ef87346a41c12e88d160930fe6f8968c8a07" # TODO.ADDR.u7
useBalance = false

[exec.sub.evm]
#平行链evm合约ETH资产映射的合约和资产类型（symbol）
ethMapFromExecutor = "paracross"
ethMapFromSymbol = "coins.bty"
#当前最大为200万
evmGasLimit=2000000
#是否开启升级
nonceUpGrade=false
addressDriver="eth"

# 预编译合约配置管理员
[exec.sub.evm.preCompile]
# 激活合token-erc20 的合约管理地址，必须配置管理员地址
superManager = [""]

[exec.sub.mix]
#私对私的交易费,交易比较大，需要多的手续费
txFee = 0
#私对私token转账，花费token(true)还是BTY(false),
tokenFee = false
#curve H point
pointHX = "19172955941344617222923168298456110557655645809646772800021167670156933290312"
pointHY = "21116962883761739586121793871108889864627195706475546685847911817475098399811"
#电路最大支持1024个叶子hash，10 level， 配置可以小于1024,但不能大于
maxTreeLeaves = 1024
#管理员列表
mixApprs = []

[exec.sub.zksync]
#管理员列表
manager = [ "0x57d405e89e81e1e416aa8b8e9b57e4b88558f663", "0x661622fb2e1a17c734eb9c41a21a02f317b9fcdb"]  # TODO.ADDR.u5.u6
#运营方配置收交易费地址,要求16进制
#可把二层交易费提取到ETH的地址,注意:真实场景需替换
ethFeeAddr = "0x832367164346888E248bd58b9A5f480299F1e88d" #TODO.ADDR.default
#二层的基于zk的chain地址，注意:非基于sep256k1的普通的chain地址，而是基于私钥产生的可用于二层的地址,真实场景需替换
layer2FeeAddr = "2930ef48b2d018955359a77fe58a68be0c536480c57ee5a84f6c96e3ff4fa7dc" # TODO.ADDR.default


#系统中所有的fork,默认用chain的测试网络的
#但是我们可以替换
[fork.system]
ForkChainParamV1 = 0
ForkCheckTxDup = 0
ForkBlockHash = 0
ForkMinerTime = 0
ForkTransferExec = 0
ForkExecKey = 0
ForkTxGroup = 0
ForkResetTx0 = 0
ForkWithdraw = 0
ForkExecRollback = 0
ForkCheckBlockTime = 0
ForkTxHeight = 0
ForkTxGroupPara = 0
ForkChainParamV2 = 0
ForkMultiSignAddress = 0
ForkStateDBSet = 0
ForkLocalDBAccess = 0
ForkBlockCheck = 0
ForkBase58AddressCheck = 0
#平行链上使能平行链执行器如user.p.x.coins执行器的注册，缺省为0，对已有的平行链需要设置一个fork高度
ForkEnableParaRegExec = 0
ForkCacheDriver = 0
ForkTicketFundAddrV1 = -1 #fork6.3
#主链和平行链都使用同一个fork高度
ForkRootHash = 0
#地址key格式化, 主要针对eth地址
ForkFormatAddressKey = 0
ForkCheckEthTxSort = 0
ForkProxyExec = 0

[fork.sub.none]
ForkUseTimeDelay = 0

[fork.sub.coins]
Enable = 0
ForkFriendExecer = 0

[fork.sub.coinsx]
Enable = 0

[fork.sub.ticket]
Enable = 0
ForkTicketId = 0
ForkTicketVrf = 0

[fork.sub.retrieve]
Enable = 0
ForkRetrive = 0
ForkRetriveAsset = 0

[fork.sub.hashlock]
Enable = 0
ForkBadRepeatSecret = 0

[fork.sub.manage]
Enable = 0
ForkManageExec = 0
#manage增加配置需要经过autonomy board成员审批，平行链不开启
ForkManageAutonomyEnable = -1

[fork.sub.token]
Enable = 0
ForkTokenBlackList = 0
ForkBadTokenSymbol = 0
ForkTokenPrice = 0
ForkTokenSymbolWithNumber = 0
ForkTokenCheck = 0
ForkTokenEvm = 0

[fork.sub.trade]
Enable = 0
ForkTradeBuyLimit = 0
ForkTradeAsset = 0
ForkTradeID = 0
ForkTradeFixAssetDB = 0
ForkTradePrice = 0

[fork.sub.paracross]
Enable = 0
ForkParacrossWithdrawFromParachain = 0
ForkParacrossCommitTx = 0
ForkLoopCheckCommitTxDone = 0
#仅平行链适用，自共识分阶段开启，缺省是0，若对应主链高度7200000之前开启过自共识，需要重新配置此分叉，并为之前自共识设置selfConsensEnablePreContract配置项
ForkParaSelfConsStages = 0
ForkParaAssetTransferRbk = 0
ForkParaSupervision = 0
#仅平行链适用，开启挖矿交易的高度，已有代码版本可能未在0高度开启挖矿，需要设置这个高度，新版本默认从0开启挖矿，通过交易配置分阶段奖励
ForkParaFullMinerHeight = 0
#仅平行链适用，在旧的版本中计算blockTxHash输入高度为0，需要在此高度后统一采用新的主链高度值，旧的版本需要设置此分叉高度，新版本缺省为0即可
ForkParaRootHash = 0
#nodegroup approve需要经过autonomy board成员审批,平行链不开启
ForkParaAutonomySuperGroup = -1
#平行链支持自由注册，主链上申请者或超级管理员或社区任其一即可注册，平行链默认开启
ForkParaFreeRegister = 0
#主链paracross合约fork后执行自己的checkTx检查，代替drivebase的检查
ForkParaCheckTx = 0

[fork.sub.evm]
Enable = 0
ForkEVMState = 0
ForkEVMABI = 0
ForkEVMFrozen = 0
ForkEVMKVHash = 0
ForkEVMYoloV1 = 0
ForkEVMTxGroup = 0
# EVM兼容base58及16进制地址混合调用处理
ForkEVMMixAddress = 0
# EVM gas 计算调整
ForkIntrinsicGas = 0
ForkEVMAddressInit = 0
ForkEvmExecNonce = 0
ForkEvmExecNonceV2 = 0
[fork.sub.blackwhite]
Enable = 0
ForkBlackWhiteV2 = 0

[fork.sub.cert]
Enable = 0

[fork.sub.guess]
Enable = 0

[fork.sub.lottery]
Enable = 0

[fork.sub.oracle]
Enable = 0

[fork.sub.relay]
Enable = 0

[fork.sub.norm]
Enable = 0

[fork.sub.pokerbull]
Enable = 0

[fork.sub.privacy]
Enable = 0

[fork.sub.game]
Enable = 0

[fork.sub.vote]
Enable = 0

[fork.sub.rollup]
Enable = 0

[fork.sub.accountmanager]
Enable = 0

[fork.sub.wasm]
Enable = 0

[fork.sub.valnode]
Enable = 0
[fork.sub.dpos]
Enable = 0
[fork.sub.echo]
Enable = 0
[fork.sub.storage]
Enable = 0
ForkStorageLocalDB = 0

[fork.sub.qbftNode]
Enable = 0

[fork.sub.multisig]
Enable = 0

[fork.sub.mix]
Enable = 0

[fork.sub.unfreeze]
Enable = 0
ForkTerminatePart = 0
ForkUnfreezeIDX = 0

[fork.sub.autonomy]
Enable = 0
ForkAutonomyDelRule = 0
ForkAutonomyEnableItem = 0

[fork.sub.jsvm]
Enable = 0

[fork.sub.evmxgo]
Enable = 0

[fork.sub.issuance]
Enable = 0
ForkIssuanceTableUpdate = 0
ForkIssuancePrecision = 0

[fork.sub.collateralize]
Enable = 0
ForkCollateralizeTableUpdate = 0
ForkCollateralizePrecision = 0

#对已有的平行链如果不是从0开始同步数据，需要设置这个kvmvccmavl的对应平行链高度的fork，如果从0开始同步，statehash会跟以前mavl的不同
[fork.sub.store-kvmvccmavl]
ForkKvmvccmavl = 0

[fork.sub.zksync]
Enable = 0


[pprof]
listenAddr = "localhost:6061"  # TODO.pprof.port

[metrics]
#是否使能发送metrics数据的发送
enableMetrics = false
#数据保存模式
dataEmitMode = "influxdb"

[metrics.sub.influxdb]
#以纳秒为单位的发送间隔
duration = 1000000000
url = "http://influxdb:8086"
database = "chainmetrics"
username = ""
password = ""
namespace = ""

#exchange合约相关配置
[mver.exec.sub.exchange]
#银行帐户列表（现第一个地址用来收取手续费）
banks = ["0x13a126ee57a0b6992f5f86a35e4f13c39e91690c"]  # TODO.ADDR.u8
#机器人帐户列表
robots = ["0x2be37d50236d29d5c7942b92847274c81c83fc60"] # TODO.ADDR.u9
#币种配置，
#coin   转入exchange合约的币种名称
#execer 转入exchange合约的币种执行器名称
#name   执行器币种的别称
coins = [
  { coin = "AS", execer = "coins", name = "AS" },
  { coin = "ASS", execer = "coins", name = "ASS" },
]
#现货交易配置
#symbol 币种对；priceDigits 价格最小位数；amountDigits 数量最小位数； minFee  最小手续费
exchanges = [
  { symbol = "AS_ASS", priceDigits = 4, amountDigits = 1, taker = 1000000, maker = 100000, minFee = 0 },
]

[fork.sub.exchange]
Enable = 0
ForkFix1 = 0
ForkParamV1 = 0
ForkParamV2 = 0
ForkParamV3 = 0
ForkParamV4 = 0
ForkParamV5 = 0
ForkParamV6 = 0
ForkParamV7 = 0
ForkParamV8 = 0
ForkParamV9 = 0
ForkParamV10 = 0
ForkParamV11 = 0
ForkParamV12 = 0
ForkParamV13 = 0
ForkParamV14 = 0
ForkParamV15 = 0
ForkParamV16 = 0
ForkParamV17 = 0
ForkParamV18 = 0
ForkParamV19 = 0
ForkParamV20 = 0
ForkParamV21 = 0
ForkParamV22 = 0
ForkParamV23 = 0
ForkParamV24 = 0
ForkParamV25 = 0
ForkParamV26 = 0
ForkParamV27 = 0
ForkParamV28 = 0
ForkParamV29 = 0

[health]
listenAddr="localhost:8805"
checkInterval=1
unSyncMaxTimes=2