TMP1200

[madwheeling]

Does artisan work with more than 2 TMP1200 sensors?

[MAKOMO]

On 11. Mar 2021, at 00:36, madwheeling ***@***.***> wrote: Does artisan work with more than 2 TMP1200 sensors?

Yep, but you can have only two different configurations (eg. PT100 in one group and PT1000 in the second group). M

…

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub, or unsubscribe.

[madwheeling]

That is great news. How do I set up different groups? I am only seeing TMP1200 A and B in the Phidgets section and the extra devices section.

[CarefreeBuzzBuzz]

@madwheeling you answered your own question. Group A and Group B. Two RTDs of the same type in each group.

[MAKOMO]

On 18. Mar 2021, at 17:43, madwheeling ***@***.***> wrote: That is great news. How do I set up different groups? I am only seeing TMP1200 A and B in the Phidgets section and the extra devices section.

Those are the two groups. You can set the configuration (like the probe type) of each of those in the Phidgets tab (menu Config >> Device, 4th tab). Then per device channel you select either the TMP1200 A or the TMP1200B to use the one or the other configuration. M

…

— You are receiving this because you commented. Reply to this email directly, view it on GitHub, or unsubscribe.

[madwheeling]

Thank you for your help, I think I understand now. I just need to find a PT1000 probe that will work for my 3rd sensor now.