diff --git a/lib/lib_basic/OneWire-Stickbreaker-20190506-1.1/OneWire.h b/lib/lib_basic/OneWire-Stickbreaker-20190506-1.1/OneWire.h
index edb31d1eb9ad..2747bea4eca4 100644
--- a/lib/lib_basic/OneWire-Stickbreaker-20190506-1.1/OneWire.h
+++ b/lib/lib_basic/OneWire-Stickbreaker-20190506-1.1/OneWire.h
@@ -161,7 +161,7 @@ IO_REG_TYPE directRead(IO_REG_TYPE pin)
 #else // plain ESP32
     if ( pin < 32 )
         return (GPIO.in >> pin) & 0x1;
-    else if ( pin < 40 )
+    else if ( pin < 46 )
         return (GPIO.in1.val >> (pin - 32)) & 0x1;
 #endif
 
@@ -176,7 +176,7 @@ void directWriteLow(IO_REG_TYPE pin)
 #else // plain ESP32
     if ( pin < 32 )
         GPIO.out_w1tc = ((uint32_t)1 << pin);
-    else if ( pin < 34 )
+    else if ( pin < 46 )
         GPIO.out1_w1tc.val = ((uint32_t)1 << (pin - 32));
 #endif
 }
@@ -189,7 +189,7 @@ void directWriteHigh(IO_REG_TYPE pin)
 #else // plain ESP32
     if ( pin < 32 )
         GPIO.out_w1ts = ((uint32_t)1 << pin);
-    else if ( pin < 34 )
+    else if ( pin < 46 )
         GPIO.out1_w1ts.val = ((uint32_t)1 << (pin - 32));
 #endif
 }
@@ -211,19 +211,15 @@ void directModeInput(IO_REG_TYPE pin)
             ESP_REG(rtc_reg) = ESP_REG(rtc_reg) & ~(rtc_gpio_desc[pin].pullup | rtc_gpio_desc[pin].pulldown);
         }
 #elif ESP_IDF_VERSION_MAJOR > 3  // ESP32-S2 needs IDF 4.2 or later
-        int rtcio_num = rtc_io_number_get((gpio_num_t)pin);
-
-        if (rtcio_num >= 0) {
-            uint32_t rtc_reg(rtc_io_desc[rtcio_num].reg);
-
-            if ( rtc_reg ) // RTC pins PULL settings
-            {
-                ESP_REG(rtc_reg) = ESP_REG(rtc_reg) & ~(rtc_io_desc[rtcio_num].mux);
-                ESP_REG(rtc_reg) = ESP_REG(rtc_reg) & ~(rtc_io_desc[rtcio_num].pullup | rtc_io_desc[rtcio_num].pulldown);
-            }
+        int8_t rtc_io = esp32_gpioMux[pin].rtc;
+        uint32_t rtc_reg = (rtc_io != -1)?rtc_io_desc[rtc_io].reg:0;
+        if ( rtc_reg ) // RTC pins PULL settings
+        {
+            ESP_REG(rtc_reg) = ESP_REG(rtc_reg) & ~(rtc_io_desc[rtc_io].mux);
+            ESP_REG(rtc_reg) = ESP_REG(rtc_reg) & ~(rtc_io_desc[rtc_io].pullup | rtc_io_desc[rtc_io].pulldown);
         }
 #endif
-
+        // Input
         if ( pin < 32 )
             GPIO.enable_w1tc = ((uint32_t)1 << pin);
         else
@@ -231,7 +227,7 @@ void directModeInput(IO_REG_TYPE pin)
 
         uint32_t pinFunction((uint32_t)2 << FUN_DRV_S); // what are the drivers?
         pinFunction |= FUN_IE; // input enable but required for output as well?
-        pinFunction |= ((uint32_t)2 << MCU_SEL_S);
+        pinFunction |= ((uint32_t)PIN_FUNC_GPIO << MCU_SEL_S);
 
         ESP_REG(DR_REG_IO_MUX_BASE + esp32_gpioMux[pin].reg) = pinFunction;
 
@@ -257,19 +253,15 @@ void directModeOutput(IO_REG_TYPE pin)
             ESP_REG(rtc_reg) = ESP_REG(rtc_reg) & ~(rtc_gpio_desc[pin].pullup | rtc_gpio_desc[pin].pulldown);
         }
 #elif ESP_IDF_VERSION_MAJOR > 3  // ESP32-S2 needs IDF 4.2 or later
-        int rtcio_num = rtc_io_number_get((gpio_num_t)pin);
-
-        if (rtcio_num >= 0) {
-            uint32_t rtc_reg(rtc_io_desc[rtcio_num].reg);
-
-            if ( rtc_reg ) // RTC pins PULL settings
-            {
-                ESP_REG(rtc_reg) = ESP_REG(rtc_reg) & ~(rtc_io_desc[rtcio_num].mux);
-                ESP_REG(rtc_reg) = ESP_REG(rtc_reg) & ~(rtc_io_desc[rtcio_num].pullup | rtc_io_desc[rtcio_num].pulldown);
-            }
+        int8_t rtc_io = esp32_gpioMux[pin].rtc;
+        uint32_t rtc_reg = (rtc_io != -1)?rtc_io_desc[rtc_io].reg:0;
+        if ( rtc_reg ) // RTC pins PULL settings
+        {
+            ESP_REG(rtc_reg) = ESP_REG(rtc_reg) & ~(rtc_io_desc[rtc_io].mux);
+            ESP_REG(rtc_reg) = ESP_REG(rtc_reg) & ~(rtc_io_desc[rtc_io].pullup | rtc_io_desc[rtc_io].pulldown);
         }
 #endif
-
+        // Output
         if ( pin < 32 )
             GPIO.enable_w1ts = ((uint32_t)1 << pin);
         else // already validated to pins <= 33
@@ -277,7 +269,7 @@ void directModeOutput(IO_REG_TYPE pin)
 
         uint32_t pinFunction((uint32_t)2 << FUN_DRV_S); // what are the drivers?
         pinFunction |= FUN_IE; // input enable but required for output as well?
-        pinFunction |= ((uint32_t)2 << MCU_SEL_S);
+        pinFunction |= ((uint32_t)PIN_FUNC_GPIO << MCU_SEL_S);
 
         ESP_REG(DR_REG_IO_MUX_BASE + esp32_gpioMux[pin].reg) = pinFunction;