- Top & Bottom Plate
- 1x Acrylic Top Plate --> e.g. Formulor Lasercut
- 1x Acrylic Bottom Plate --> e.g. Formulor Lasercut
- alternative: use plywood, alu, or something else what you can process
- 16x Rostock Mini Pro Printed Parts --> print with a printer of a friend (RepRap-Style) or use shapeways
- 1x 625ZZ Bearing Ebay
- 6x linear bearing (choose one alternative):
- 6x 608ZZ Bearing Ebay
- 12x Traxxas 5347 U-joints Ebay
- 3x GT-2 36 Pulley Ebay
- 3x GT-2 Timing-Belt (1m) Ebay
- 6x 8mm Hardened Zinc-coated Precision Rod (50cm) Ebay
- alternative: standard rod 8mm (much cheaper)
- 6x 3K Carbon Fiber Tubes (>=15cm), ri=4mm
- alternative: aluminum tube (hardware store)
- 3x Endstopps - choose alternative:
- magnet hal-sensors and 3x2mm neodym magnets --> TODO: add link to osh-park
- optical: Ebay
- mechanical switch
- 1x RAMPS 1.4 Assembled (modified for laptop charger) Ebay
- Arduino Mega (came with RAMPS)
- Motordriver Drv8825 1.5A (came with RAMPS)
- alternative: Git
- 3x Nema 17 Motor Ebay
- 1x Nema 17 Motor coupled with Planetary Gearbox 5.2:1 Ali
- alternative: nema 17 without gearbox
- 1x 12V >=200W Laptop Charger Ebay
- alternative: withoud heatbed you need <= 100W
- heat-bed MK3 Aluminum Ebay
- temperature sensor NTC 3950 100k (for heatbed and hotend) Ebay
- power-switch Conrad / Datasheet
- E3D Volcano Clone Ali
- All Metal Bowden extruder Ali
- alternative: print your own
- Heat-Cartridge Ali
- Bowden-1.75mm Ptfe teflon tube 2x4 mm Ebay
- Push Fitting PC4-M6 Ebay
-
30x 3mm Zip-ties (hardware store)
- Bolts, Nuts, Screws & washer: M3 M4 M5 M8 (hardware-store)
- the following part-counts may be wrong by now
- M2.5: 12mm 6x
- M3: 10mm 12x, 16mm 33x, 25mm 12x, 30mm 3x
- M4: 12mm 6x, 16mm 18x, 30mm 2x, 50mm 6x, 70mm 6x
- M5: 20mm 1x
- M8: 30mm 3x
- Fans: 40mm, 120mm for cooling RAMPS-Board and the printed body Ebay
- Glass-plate on the Heat-bed (Alu-Heat-bed is not plane when hot) --> use from an old picture-frame
- 3x Belt Spring Tensioner Ebay
- z-probe (select your alternative):
- 4x springs to mount the heatbed with variable distance from bottomplate (better for calibration) --> use spring from biro or look at hardwarestore
- 3x springs to hold the carbon fiber tubes together --> allows for less friction by not tightening the screws of the traxxas joints
- extra nozzles (aliexpress)
- nozzle cleaners Ali
- RingLEDs 60mm inner radius Ebay
- Thermal Glue to mount heatspreader to the motordrivers Ebay
- cable wrap to tidy things up