diff --git a/roles/podman/defaults/main.yml b/roles/podman/defaults/main.yml new file mode 100644 index 0000000..a9d1e84 --- /dev/null +++ b/roles/podman/defaults/main.yml @@ -0,0 +1,2 @@ +--- +podman: false diff --git a/roles/podman/files/storage.conf b/roles/podman/files/storage.conf new file mode 100644 index 0000000..7082c0b --- /dev/null +++ b/roles/podman/files/storage.conf @@ -0,0 +1,244 @@ +# This file is the configuration file for all tools +# that use the containers/storage library. The storage.conf file +# overrides all other storage.conf files. Container engines using the +# container/storage library do not inherit fields from other storage.conf +# files. +# +# Note: The storage.conf file overrides other storage.conf files based on this precedence: +# /usr/containers/storage.conf +# /etc/containers/storage.conf +# $HOME/.config/containers/storage.conf +# $XDG_CONFIG_HOME/containers/storage.conf (If XDG_CONFIG_HOME is set) +# See man 5 containers-storage.conf for more information +# The "container storage" table contains all of the server options. +[storage] + +# Default Storage Driver, Must be set for proper operation. +driver = "overlay" + +# Temporary storage location +runroot = "/run/containers/storage" + +# Primary Read/Write location of container storage +# When changing the graphroot location on an SELINUX system, you must +# ensure the labeling matches the default locations labels with the +# following commands: +# semanage fcontext -a -e /var/lib/containers/storage /NEWSTORAGEPATH +# restorecon -R -v /NEWSTORAGEPATH +graphroot = "/var/lib/containers/storage" + +# Optional value for image storage location +# If set, it must be different than graphroot. + +# imagestore = "" + + +# Storage path for rootless users +# +# rootless_storage_path = "$HOME/.local/share/containers/storage" + +# Transient store mode makes all container metadata be saved in temporary storage +# (i.e. runroot above). This is faster, but doesn't persist across reboots. +# Additional garbage collection must also be performed at boot-time, so this +# option should remain disabled in most configurations. +# transient_store = true + +[storage.options] +# Storage options to be passed to underlying storage drivers + +# AdditionalImageStores is used to pass paths to additional Read/Only image stores +# Must be comma separated list. +additionalimagestores = [ +] + +# Allows specification of how storage is populated when pulling images. This +# option can speed the pulling process of images compressed with format +# zstd:chunked. Containers/storage looks for files within images that are being +# pulled from a container registry that were previously pulled to the host. It +# can copy or create a hard link to the existing file when it finds them, +# eliminating the need to pull them from the container registry. These options +# can deduplicate pulling of content, disk storage of content and can allow the +# kernel to use less memory when running containers. + +# containers/storage supports three keys +# * enable_partial_images="true" | "false" +# Tells containers/storage to look for files previously pulled in storage +# rather then always pulling them from the container registry. +# * use_hard_links = "false" | "true" +# Tells containers/storage to use hard links rather then create new files in +# the image, if an identical file already existed in storage. +# * ostree_repos = "" +# Tells containers/storage where an ostree repository exists that might have +# previously pulled content which can be used when attempting to avoid +# pulling content from the container registry +pull_options = {enable_partial_images = "false", use_hard_links = "false", ostree_repos=""} + +# Remap-UIDs/GIDs is the mapping from UIDs/GIDs as they should appear inside of +# a container, to the UIDs/GIDs as they should appear outside of the container, +# and the length of the range of UIDs/GIDs. Additional mapped sets can be +# listed and will be heeded by libraries, but there are limits to the number of +# mappings which the kernel will allow when you later attempt to run a +# container. +# +# remap-uids = "0:1668442479:65536" +# remap-gids = "0:1668442479:65536" + +# Remap-User/Group is a user name which can be used to look up one or more UID/GID +# ranges in the /etc/subuid or /etc/subgid file. Mappings are set up starting +# with an in-container ID of 0 and then a host-level ID taken from the lowest +# range that matches the specified name, and using the length of that range. +# Additional ranges are then assigned, using the ranges which specify the +# lowest host-level IDs first, to the lowest not-yet-mapped in-container ID, +# until all of the entries have been used for maps. This setting overrides the +# Remap-UIDs/GIDs setting. +# +# remap-user = "containers" +# remap-group = "containers" + +# Root-auto-userns-user is a user name which can be used to look up one or more UID/GID +# ranges in the /etc/subuid and /etc/subgid file. These ranges will be partitioned +# to containers configured to create automatically a user namespace. Containers +# configured to automatically create a user namespace can still overlap with containers +# having an explicit mapping set. +# This setting is ignored when running as rootless. +# root-auto-userns-user = "storage" +# +# Auto-userns-min-size is the minimum size for a user namespace created automatically. +# auto-userns-min-size=1024 +# +# Auto-userns-max-size is the maximum size for a user namespace created automatically. +# auto-userns-max-size=65536 + +[storage.options.overlay] +# ignore_chown_errors can be set to allow a non privileged user running with +# a single UID within a user namespace to run containers. The user can pull +# and use any image even those with multiple uids. Note multiple UIDs will be +# squashed down to the default uid in the container. These images will have no +# separation between the users in the container. Only supported for the overlay +# and vfs drivers. +#ignore_chown_errors = "false" + +# Inodes is used to set a maximum inodes of the container image. +# inodes = "" + +# Path to an helper program to use for mounting the file system instead of mounting it +# directly. +#mount_program = "/usr/bin/fuse-overlayfs" + +# mountopt specifies comma separated list of extra mount options +mountopt = "nodev" + +# Set to skip a PRIVATE bind mount on the storage home directory. +# skip_mount_home = "false" + +# Size is used to set a maximum size of the container image. +# size = "" + +# ForceMask specifies the permissions mask that is used for new files and +# directories. +# +# The values "shared" and "private" are accepted. +# Octal permission masks are also accepted. +# +# "": No value specified. +# All files/directories, get set with the permissions identified within the +# image. +# "private": it is equivalent to 0700. +# All files/directories get set with 0700 permissions. The owner has rwx +# access to the files. No other users on the system can access the files. +# This setting could be used with networked based homedirs. +# "shared": it is equivalent to 0755. +# The owner has rwx access to the files and everyone else can read, access +# and execute them. This setting is useful for sharing containers storage +# with other users. For instance have a storage owned by root but shared +# to rootless users as an additional store. +# NOTE: All files within the image are made readable and executable by any +# user on the system. Even /etc/shadow within your image is now readable by +# any user. +# +# OCTAL: Users can experiment with other OCTAL Permissions. +# +# Note: The force_mask Flag is an experimental feature, it could change in the +# future. When "force_mask" is set the original permission mask is stored in +# the "user.containers.override_stat" xattr and the "mount_program" option must +# be specified. Mount programs like "/usr/bin/fuse-overlayfs" present the +# extended attribute permissions to processes within containers rather than the +# "force_mask" permissions. +# +# force_mask = "" + +[storage.options.thinpool] +# Storage Options for thinpool + +# autoextend_percent determines the amount by which pool needs to be +# grown. This is specified in terms of % of pool size. So a value of 20 means +# that when threshold is hit, pool will be grown by 20% of existing +# pool size. +# autoextend_percent = "20" + +# autoextend_threshold determines the pool extension threshold in terms +# of percentage of pool size. For example, if threshold is 60, that means when +# pool is 60% full, threshold has been hit. +# autoextend_threshold = "80" + +# basesize specifies the size to use when creating the base device, which +# limits the size of images and containers. +# basesize = "10G" + +# blocksize specifies a custom blocksize to use for the thin pool. +# blocksize="64k" + +# directlvm_device specifies a custom block storage device to use for the +# thin pool. Required if you setup devicemapper. +# directlvm_device = "" + +# directlvm_device_force wipes device even if device already has a filesystem. +# directlvm_device_force = "True" + +# fs specifies the filesystem type to use for the base device. +# fs="xfs" + +# log_level sets the log level of devicemapper. +# 0: LogLevelSuppress 0 (Default) +# 2: LogLevelFatal +# 3: LogLevelErr +# 4: LogLevelWarn +# 5: LogLevelNotice +# 6: LogLevelInfo +# 7: LogLevelDebug +# log_level = "7" + +# min_free_space specifies the min free space percent in a thin pool require for +# new device creation to succeed. Valid values are from 0% - 99%. +# Value 0% disables +# min_free_space = "10%" + +# mkfsarg specifies extra mkfs arguments to be used when creating the base +# device. +# mkfsarg = "" + +# metadata_size is used to set the `pvcreate --metadatasize` options when +# creating thin devices. Default is 128k +# metadata_size = "" + +# Size is used to set a maximum size of the container image. +# size = "" + +# use_deferred_removal marks devicemapper block device for deferred removal. +# If the thinpool is in use when the driver attempts to remove it, the driver +# tells the kernel to remove it as soon as possible. Note this does not free +# up the disk space, use deferred deletion to fully remove the thinpool. +# use_deferred_removal = "True" + +# use_deferred_deletion marks thinpool device for deferred deletion. +# If the device is busy when the driver attempts to delete it, the driver +# will attempt to delete device every 30 seconds until successful. +# If the program using the driver exits, the driver will continue attempting +# to cleanup the next time the driver is used. Deferred deletion permanently +# deletes the device and all data stored in device will be lost. +# use_deferred_deletion = "True" + +# xfs_nospace_max_retries specifies the maximum number of retries XFS should +# attempt to complete IO when ENOSPC (no space) error is returned by +# underlying storage device. +# xfs_nospace_max_retries = "0" diff --git a/roles/podman/handlers/main.yml b/roles/podman/handlers/main.yml new file mode 100644 index 0000000..9065396 --- /dev/null +++ b/roles/podman/handlers/main.yml @@ -0,0 +1,4 @@ +--- +- name: Reset podman state + ansible.builtin.command: # noqa no-changed-when + cmd: podman system reset -f diff --git a/roles/podman/tasks/main.yml b/roles/podman/tasks/main.yml index 0c70f90..d12d406 100644 --- a/roles/podman/tasks/main.yml +++ b/roles/podman/tasks/main.yml @@ -1,8 +1,9 @@ --- - name: Install podman's storage.conf - when: podman_zfs_dataset is defined - ansible.builtin.template: - src: storage.conf.j2 + when: podman + notify: Reset podman state + ansible.builtin.copy: + src: storage.conf dest: /etc/containers/storage.conf owner: root group: root