Skip to content

Latest commit

 

History

History
61 lines (48 loc) · 1.83 KB

README.md

File metadata and controls

61 lines (48 loc) · 1.83 KB

CONTENTS OF THIS FILE

* Introduction
* Version
* Integration details
* Driver files information
* Supported sensor interface
* Copyright

INTRODUCTION

- This package contains the Bosch Sensortec MEMS pressure sensor driver (sensor API)
- The sensor driver package includes bmp280.h, bmp280.c and bmp280_support.c files

VERSION

- Version of bmp280 sensor driver is:
	* bmp280.c 		- V2.0.3
	* bmp280.h 		- V2.0.3
	* bmp280_support.c 	- V1.0.4

INTEGRATION DETAILS

- Integrate bmp280.h and bmp280.c file in to your project.
- The bmp280_support.c file contains only examples for API use cases, so it is not required to integrate into project.

DRIVER FILES INFORMATION

bmp280.h
-----------
	* This header file has the register address definition, constant definitions, data type definition and supported sensor driver calls declarations.

 bmp280.c
------------
	* This file contains the implementation for the sensor driver APIs.

 bmp280_support.c
----------------------
	* This file shall be used as an user guidance, here you can find samples of
			* Initialize the sensor with I2C/SPI communication
    				- Add your code to the SPI and/or I2C bus read and bus write functions.
        					- Return value can be chosen by yourself
       					- API just passes that value to your application code
    				- Add your code to the delay function
    				- Change I2C address accordingly in bmp280.h
		* Power mode configuration of the sensor
		* Get and set functions usage
		* Reading the sensor read out data

SUPPORTED SENSOR INTERFACE

- This pressure sensor driver supports I2C and SPI interfaces

COPYRIGHT

- Copyright (C) 2012 - 2014 Bosch Sensortec GmbH