From abb9f879378e106c12187fbdf8f4388624dd215a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Kamil=20Doma=C5=84ski?= Date: Mon, 15 Apr 2024 15:45:00 +0200 Subject: [PATCH] fix typo in hall_effect_endstop_setup.md (#413) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It was visibly breaking the formatting. Published at https://docs.vorondesign.com/community/electronics/120decibell/hall_effect_endstop_setup.html Signed-off-by: Kamil Domański --- community/electronics/120decibell/hall_effect_endstop_setup.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/community/electronics/120decibell/hall_effect_endstop_setup.md b/community/electronics/120decibell/hall_effect_endstop_setup.md index 35072ab9..159436b3 100644 --- a/community/electronics/120decibell/hall_effect_endstop_setup.md +++ b/community/electronics/120decibell/hall_effect_endstop_setup.md @@ -13,7 +13,7 @@ The hall effect endstop board is a non-mechanical alternative to the X and Y end ## Requirements * The alternate Z joint "z\_joint\_upper\_hall\_effect" must be printed, quantity 1. -* The alternate endstop pod "[a]\_endstop\_pod\_hall|_effect" must be printed, quantity 1. +* The alternate endstop pod "[a]\_endstop\_pod\_hall\_effect" must be printed, quantity 1. * 4 wires must be installed into the cable chain. ## Wiring