diff --git a/docs/chromadeck_upgrade_guide.md b/docs/chromadeck_upgrade_guide.md index b86c7a3d02..0a5029f532 100644 --- a/docs/chromadeck_upgrade_guide.md +++ b/docs/chromadeck_upgrade_guide.md @@ -46,7 +46,7 @@ It is important to keep the Chromadeck up to date to avoid bugs and use the late - Cycle through all of the modes to verify the flash was successful -## Troubleshooting +# Troubleshooting **It doesn't work!** If you encounter any other issues, try refreshing to page and unplugging and reconnecting your chromadeck. Also make sure the power switch is in the ON position while it is plugged in. diff --git a/docs/duo_upgrade_guide.md b/docs/duo_upgrade_guide.md index 7fbd8b203e..32591de89d 100644 --- a/docs/duo_upgrade_guide.md +++ b/docs/duo_upgrade_guide.md @@ -73,7 +73,7 @@ Before updating the Duo firmware, always ensure the **Chromadeck** is [up to dat - Turn the Duo on and cycle through all of it's modes to verify the flash was successful -## Troubleshooting +# Troubleshooting **The Duo doesn't turn on** Repeat the process if the Duo doesn't work, make sure the duo was properly seated into the Chromalink and the progress bar in the Chromalink window fills diff --git a/docs/gloves_upgrade_guide.md b/docs/gloves_upgrade_guide.md index a3b3e7eef9..c3e0887976 100644 --- a/docs/gloves_upgrade_guide.md +++ b/docs/gloves_upgrade_guide.md @@ -31,7 +31,7 @@ Finally, Drag & Drop the device firmware into the Trinketboot drive to automatic As long as the file transfer completes, the firmware should be updated. -## Troubleshooting +# Troubleshooting **The drive doesn't show up** Most likely you are not using a data-capable usb cable, try different usb cables and different usb ports on the PC. diff --git a/docs/handle_upgrade_guide.md b/docs/handle_upgrade_guide.md index c8b9d2800f..0a16c336d5 100644 --- a/docs/handle_upgrade_guide.md +++ b/docs/handle_upgrade_guide.md @@ -31,7 +31,7 @@ Finally, Drag & Drop the device firmware into the Trinketboot drive to automatic As long as the file transfer completes, the firmware should be updated. -## Troubleshooting +# Troubleshooting **The drive doesn't show up** Most likely you are not using a data-capable usb cable, try different usb cables and different usb ports on the PC. diff --git a/docs/orbit_upgrade_guide.md b/docs/orbit_upgrade_guide.md index ec0fcc3a94..8abaa5c45d 100644 --- a/docs/orbit_upgrade_guide.md +++ b/docs/orbit_upgrade_guide.md @@ -32,7 +32,7 @@ Finally, Drag & Drop the device firmware into the Trinketboot drive to automatic As long as the file transfer completes, the firmware should be updated. -## Troubleshooting +# Troubleshooting **The drive doesn't show up** Most likely you are not using a data-capable usb cable, try different usb cables and different usb ports on the PC. diff --git a/docs/spark_upgrade_guide.md b/docs/spark_upgrade_guide.md index 8d14f16b15..eb64ee55eb 100644 --- a/docs/spark_upgrade_guide.md +++ b/docs/spark_upgrade_guide.md @@ -46,7 +46,7 @@ It is important to keep the Spark up to date to avoid bugs and use the latest sa - Cycle through all of the modes to verify the flash was successful -## Troubleshooting +# Troubleshooting **It doesn't work!** If you encounter any other issues, try refreshing to page and unplugging and reconnecting your spark. Although it shouldn't be necessary, make sure the power switch is in the ON position while it is plugged in.