Skip to content

Latest commit

 

History

History
87 lines (65 loc) · 3.07 KB

README.md

File metadata and controls

87 lines (65 loc) · 3.07 KB
Raw

ROS OpenCV camera driver

It is very easy to capture video device if we use cv::VideoCapture of OpenCV.

If you are searching ROS2 driver, check here

cv_camera_node

This node uses camera_info_manager for dealing with camera_info. If no calibration data is set, it has dummy values except for width and height.

Publish

  • ~image_raw (sensor_msgs/Image)
  • ~camera_info (sensor_msgs/CameraInfo)

Service

  • ~set_camera_info (sensor_msgs/SetCameraInfo)

Parameters

  • ~rate (double, default: 30.0) – publish rate [Hz].
  • ~device_id (int, default: 0) – capture device id.
  • ~device_path (string, default: "") – path to camera device file, e. g. /dev/video0.
  • ~frame_id (string, default: "camera") – frame_id of message header.
  • ~image_width (int) – try to set capture image width.
  • ~image_height (int) – try to set capture image height.
  • ~camera_info_url (string) – url of camera info yaml.
  • ~file (string, default: "") – if not "" then use movie file instead of device.
  • ~capture_delay (double, default: 0) – estimated duration of capturing and receiving the image.
  • ~rescale_camera_info (bool, default: false) – rescale camera calibration info automatically.
  • ~camera_name (bool, default: same as frame_id) – camera name for camera_info_manager.
  • ~flip_image (bool, default: false) – flip the image according to image_flip_code.
  • ~image_flip_code (int, default: -1) – code to flip the image see cv::flip() for description.

Supports CV_CAP_PROP_*, by below params.

  • ~cv_cap_prop_pos_msec (double)
  • ~cv_cap_prop_pos_avi_ratio (double)
  • ~cv_cap_prop_frame_width (double)
  • ~cv_cap_prop_frame_height (double)
  • ~cv_cap_prop_fps (double)
  • ~cv_cap_prop_fourcc (double)
  • ~cv_cap_prop_frame_count (double)
  • ~cv_cap_prop_format (double)
  • ~cv_cap_prop_mode (double)
  • ~cv_cap_prop_brightness (double)
  • ~cv_cap_prop_contrast (double)
  • ~cv_cap_prop_saturation (double)
  • ~cv_cap_prop_hue (double)
  • ~cv_cap_prop_gain (double)
  • ~cv_cap_prop_exposure (double)
  • ~cv_cap_prop_convert_rgb (double)
  • ~cv_cap_prop_rectification (double)
  • ~cv_cap_prop_iso_speed (double)

And supports any props. Thanks to Hernan Badino!

  • ~property_$(i)_code (int) – set this code property using ~property_$(i)_value, $(i) must start from 0.
  • ~property_$(i)_value (double) – the value to be set to ~property_$(i)_code

If you want to set the property which code is 404 as 1,

rosrun cv_camera cv_camera_node _property_0_code:=404 _property_0_value:=1

If you want to set more, use ~property_1_code and ~property_1_value.

Nodelet

This node works as nodelet (cv_camera/CvCameraNodelet).

Contributors

PR is welcome. I'll review your code to keep consistency, be patient.

  • Oleg Kalachev
  • Mikael Arguedas
  • Maurice Meedendorp
  • Max Schettler
  • Lukas Bulwahn